[PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Randy Dunlap]

Correct many spelling errors in Documentation/ as reported by codespell.

Maintainers of specific kernel subsystems are only Cc-ed on their
respective patches, not the entire series. [if all goes well]

These patches are based on linux-next-20230125.


 [PATCH 01/35] Documentation: arm64: correct spelling
 [PATCH 02/35] Documentation: arm: correct spelling
 [PATCH 03/35] Documentation: block: correct spelling
 [PATCH 04/35] Documentation: bpf: correct spelling
 [PATCH 05/35] Documentation: core-api: correct spelling
 [PATCH 06/35] Documentation: fault-injection: correct spelling
 [PATCH 07/35] Documentation: fb: correct spelling
 [PATCH 08/35] Documentation: features: correct spelling
 [PATCH 09/35] Documentation: firmware-guide/acpi: correct spelling
 [PATCH 10/35] Documentation: hid: correct spelling
 [PATCH 11/35] Documentation: i2c: correct spelling
 [PATCH 12/35] Documentation: input: correct spelling
 [PATCH 13/35] Documentation: isdn: correct spelling
 [PATCH 14/35] Documentation: leds: correct spelling
 [PATCH 15/35] Documentation: litmus-tests: correct spelling
 [PATCH 16/35] Documentation: livepatch: correct spelling
 [PATCH 17/35] Documentation: locking: correct spelling
 [PATCH 18/35] Documentation: mm: correct spelling
 [PATCH 19/35] Documentation: openrisc: correct spelling
 [PATCH 20/35] Documentation: PCI: correct spelling
 [PATCH 21/35] Documentation: powerpc: correct spelling
 [PATCH 22/35] Documentation: power: correct spelling
 [PATCH 23/35] Documentation: s390: correct spelling
 [PATCH 24/35] Documentation: scheduler: correct spelling
 [PATCH 25/35] Documentation: security: correct spelling
 [PATCH 26/35] Documentation: sound: correct spelling
 [PATCH 27/35] Documentation: spi: correct spelling
 [PATCH 28/35] Documentation: target: correct spelling
 [PATCH 29/35] Documentation: timers: correct spelling
 [PATCH 30/35] Documentation: tools/rtla: correct spelling
 [PATCH 31/35] Documentation: trace: correct spelling
 [PATCH 32/35] Documentation: usb: correct spelling
 [PATCH 33/35] Documentation: w1: correct spelling
 [PATCH 34/35] Documentation: x86: correct spelling
 [PATCH 35/35] Documentation: xtensa: correct spelling


 Documentation/PCI/endpoint/pci-vntb-howto.rst                    |    2 -
 Documentation/PCI/msi-howto.rst                                  |    2 -
 Documentation/arm/arm.rst                                        |    2 -
 Documentation/arm/ixp4xx.rst                                     |    4 +-
 Documentation/arm/keystone/knav-qmss.rst                         |    2 -
 Documentation/arm/stm32/stm32-dma-mdma-chaining.rst              |    6 +--
 Documentation/arm/sunxi/clocks.rst                               |    2 -
 Documentation/arm/swp_emulation.rst                              |    2 -
 Documentation/arm/tcm.rst                                        |    2 -
 Documentation/arm/vlocks.rst                                     |    2 -
 Documentation/arm64/booting.rst                                  |    2 -
 Documentation/arm64/elf_hwcaps.rst                               |    2 -
 Documentation/arm64/sve.rst                                      |    4 +-
 Documentation/block/data-integrity.rst                           |    2 -
 Documentation/bpf/libbpf/libbpf_naming_convention.rst            |    6 +--
 Documentation/bpf/map_xskmap.rst                                 |    2 -
 Documentation/bpf/ringbuf.rst                                    |    4 +-
 Documentation/bpf/verifier.rst                                   |    2 -
 Documentation/core-api/packing.rst                               |    2 -
 Documentation/core-api/padata.rst                                |    2 -
 Documentation/fault-injection/fault-injection.rst                |    2 -
 Documentation/fb/sm712fb.rst                                     |    2 -
 Documentation/fb/sstfb.rst                                       |    2 -
 Documentation/features/core/thread-info-in-task/arch-support.txt |    2 -
 Documentation/firmware-guide/acpi/acpi-lid.rst                   |    2 -
 Documentation/firmware-guide/acpi/namespace.rst                  |    2 -
 Documentation/hid/hid-alps.rst                                   |    2 -
 Documentation/hid/hid-bpf.rst                                    |    2 -
 Documentation/hid/hiddev.rst                                     |    2 -
 Documentation/hid/hidraw.rst                                     |    2 -
 Documentation/hid/intel-ish-hid.rst                              |    2 -
 Documentation/i2c/gpio-fault-injection.rst                       |    2 -
 Documentation/i2c/smbus-protocol.rst                             |    2 -
 Documentation/input/devices/iforce-protocol.rst                  |    2 -
 Documentation/input/multi-touch-protocol.rst                     |    2 -
 Documentation/isdn/interface_capi.rst                            |    2 -
 Documentation/isdn/m_isdn.rst                                    |    2 -
 Documentation/leds/leds-qcom-lpg.rst                             |    4 +-
 Documentation/litmus-tests/README                                |    2 -
 Documentation/livepatch/reliable-stacktrace.rst                  |    2 -
 Documentation/locking/lockdep-design.rst                         |    4 +-
 Documentation/locking/locktorture.rst                            |    2 -
 Documentation/locking/locktypes.rst                              |    2 -
 Documentation/locking/preempt-locking.rst                        |    2 -
 Documentation/mm/hmm.rst                                         |    4 +-
 Documentation/mm/hwpoison.rst                                    |    2 -
 Documentation/openrisc/openrisc_port.rst                         |    4 +-
 Documentation/power/suspend-and-interrupts.rst                   |    2 -
 Documentation/powerpc/kasan.txt                                  |    2 -
 Documentation/powerpc/papr_hcalls.rst                            |    2 -
 Documentation/powerpc/qe_firmware.rst                            |    4 +-
 Documentation/powerpc/vas-api.rst                                |    4 +-
 Documentation/s390/pci.rst                                       |    4 +-
 Documentation/s390/vfio-ccw.rst                                  |    2 -
 Documentation/scheduler/sched-bwc.rst                            |    2 -
 Documentation/scheduler/sched-energy.rst                         |    4 +-
 Documentation/security/digsig.rst                                |    4 +-
 Documentation/security/keys/core.rst                             |    2 -
 Documentation/security/secrets/coco.rst                          |    2 -
 Documentation/sound/alsa-configuration.rst                       |    8 ++--
 Documentation/sound/cards/audigy-mixer.rst                       |    2 -
 Documentation/sound/cards/maya44.rst                             |    2 -
 Documentation/sound/cards/sb-live-mixer.rst                      |    2 -
 Documentation/sound/designs/jack-controls.rst                    |    2 -
 Documentation/sound/designs/seq-oss.rst                          |    2 -
 Documentation/sound/hd-audio/notes.rst                           |    2 -
 Documentation/spi/pxa2xx.rst                                     |   12 +++---
 Documentation/spi/spi-lm70llp.rst                                |    2 -
 Documentation/spi/spi-summary.rst                                |    2 -
 Documentation/target/tcmu-design.rst                             |    2 -
 Documentation/timers/hrtimers.rst                                |    2 -
 Documentation/tools/rtla/rtla-timerlat-top.rst                   |    2 -
 Documentation/trace/coresight/coresight-etm4x-reference.rst      |    2 -
 Documentation/trace/events.rst                                   |    6 +--
 Documentation/trace/fprobe.rst                                   |    2 -
 Documentation/trace/ftrace-uses.rst                              |    2 -
 Documentation/trace/hwlat_detector.rst                           |    2 -
 Documentation/trace/rv/runtime-verification.rst                  |    2 -
 Documentation/trace/uprobetracer.rst                             |    2 -
 Documentation/usb/chipidea.rst                                   |   19 +++++-----
 Documentation/usb/gadget-testing.rst                             |    2 -
 Documentation/usb/mass-storage.rst                               |    2 -
 Documentation/w1/w1-netlink.rst                                  |    2 -
 Documentation/x86/boot.rst                                       |    2 -
 Documentation/x86/buslock.rst                                    |    2 -
 Documentation/x86/mds.rst                                        |    2 -
 Documentation/x86/resctrl.rst                                    |    2 -
 Documentation/x86/sgx.rst                                        |    2 -
 Documentation/xtensa/atomctl.rst                                 |    2 -
 89 files changed, 124 insertions(+), 123 deletions(-)


Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Wolfram Sang <wsa@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Lee Jones <lee@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Len Brown <len.brown@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>

Cc: alsa-devel@alsa-project.org
Cc: coresight@lists.linaro.org
Cc: bpf@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: isdn4linux@listserv.isdn4linux.de
Cc: keyrings@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-block@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-sgx@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Cc: live-patching@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: openrisc@lists.librecores.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: x86@kernel.org

[PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Randy Dunlap]

Correct many spelling errors in Documentation/ as reported by codespell.

Maintainers of specific kernel subsystems are only Cc-ed on their
respective patches, not the entire series. [if all goes well]

These patches are based on linux-next-20230125.


 [PATCH 01/35] Documentation: arm64: correct spelling
 [PATCH 02/35] Documentation: arm: correct spelling
 [PATCH 03/35] Documentation: block: correct spelling
 [PATCH 04/35] Documentation: bpf: correct spelling
 [PATCH 05/35] Documentation: core-api: correct spelling
 [PATCH 06/35] Documentation: fault-injection: correct spelling
 [PATCH 07/35] Documentation: fb: correct spelling
 [PATCH 08/35] Documentation: features: correct spelling
 [PATCH 09/35] Documentation: firmware-guide/acpi: correct spelling
 [PATCH 10/35] Documentation: hid: correct spelling
 [PATCH 11/35] Documentation: i2c: correct spelling
 [PATCH 12/35] Documentation: input: correct spelling
 [PATCH 13/35] Documentation: isdn: correct spelling
 [PATCH 14/35] Documentation: leds: correct spelling
 [PATCH 15/35] Documentation: litmus-tests: correct spelling
 [PATCH 16/35] Documentation: livepatch: correct spelling
 [PATCH 17/35] Documentation: locking: correct spelling
 [PATCH 18/35] Documentation: mm: correct spelling
 [PATCH 19/35] Documentation: openrisc: correct spelling
 [PATCH 20/35] Documentation: PCI: correct spelling
 [PATCH 21/35] Documentation: powerpc: correct spelling
 [PATCH 22/35] Documentation: power: correct spelling
 [PATCH 23/35] Documentation: s390: correct spelling
 [PATCH 24/35] Documentation: scheduler: correct spelling
 [PATCH 25/35] Documentation: security: correct spelling
 [PATCH 26/35] Documentation: sound: correct spelling
 [PATCH 27/35] Documentation: spi: correct spelling
 [PATCH 28/35] Documentation: target: correct spelling
 [PATCH 29/35] Documentation: timers: correct spelling
 [PATCH 30/35] Documentation: tools/rtla: correct spelling
 [PATCH 31/35] Documentation: trace: correct spelling
 [PATCH 32/35] Documentation: usb: correct spelling
 [PATCH 33/35] Documentation: w1: correct spelling
 [PATCH 34/35] Documentation: x86: correct spelling
 [PATCH 35/35] Documentation: xtensa: correct spelling


 Documentation/PCI/endpoint/pci-vntb-howto.rst                    |    2 -
 Documentation/PCI/msi-howto.rst                                  |    2 -
 Documentation/arm/arm.rst                                        |    2 -
 Documentation/arm/ixp4xx.rst                                     |    4 +-
 Documentation/arm/keystone/knav-qmss.rst                         |    2 -
 Documentation/arm/stm32/stm32-dma-mdma-chaining.rst              |    6 +--
 Documentation/arm/sunxi/clocks.rst                               |    2 -
 Documentation/arm/swp_emulation.rst                              |    2 -
 Documentation/arm/tcm.rst                                        |    2 -
 Documentation/arm/vlocks.rst                                     |    2 -
 Documentation/arm64/booting.rst                                  |    2 -
 Documentation/arm64/elf_hwcaps.rst                               |    2 -
 Documentation/arm64/sve.rst                                      |    4 +-
 Documentation/block/data-integrity.rst                           |    2 -
 Documentation/bpf/libbpf/libbpf_naming_convention.rst            |    6 +--
 Documentation/bpf/map_xskmap.rst                                 |    2 -
 Documentation/bpf/ringbuf.rst                                    |    4 +-
 Documentation/bpf/verifier.rst                                   |    2 -
 Documentation/core-api/packing.rst                               |    2 -
 Documentation/core-api/padata.rst                                |    2 -
 Documentation/fault-injection/fault-injection.rst                |    2 -
 Documentation/fb/sm712fb.rst                                     |    2 -
 Documentation/fb/sstfb.rst                                       |    2 -
 Documentation/features/core/thread-info-in-task/arch-support.txt |    2 -
 Documentation/firmware-guide/acpi/acpi-lid.rst                   |    2 -
 Documentation/firmware-guide/acpi/namespace.rst                  |    2 -
 Documentation/hid/hid-alps.rst                                   |    2 -
 Documentation/hid/hid-bpf.rst                                    |    2 -
 Documentation/hid/hiddev.rst                                     |    2 -
 Documentation/hid/hidraw.rst                                     |    2 -
 Documentation/hid/intel-ish-hid.rst                              |    2 -
 Documentation/i2c/gpio-fault-injection.rst                       |    2 -
 Documentation/i2c/smbus-protocol.rst                             |    2 -
 Documentation/input/devices/iforce-protocol.rst                  |    2 -
 Documentation/input/multi-touch-protocol.rst                     |    2 -
 Documentation/isdn/interface_capi.rst                            |    2 -
 Documentation/isdn/m_isdn.rst                                    |    2 -
 Documentation/leds/leds-qcom-lpg.rst                             |    4 +-
 Documentation/litmus-tests/README                                |    2 -
 Documentation/livepatch/reliable-stacktrace.rst                  |    2 -
 Documentation/locking/lockdep-design.rst                         |    4 +-
 Documentation/locking/locktorture.rst                            |    2 -
 Documentation/locking/locktypes.rst                              |    2 -
 Documentation/locking/preempt-locking.rst                        |    2 -
 Documentation/mm/hmm.rst                                         |    4 +-
 Documentation/mm/hwpoison.rst                                    |    2 -
 Documentation/openrisc/openrisc_port.rst                         |    4 +-
 Documentation/power/suspend-and-interrupts.rst                   |    2 -
 Documentation/powerpc/kasan.txt                                  |    2 -
 Documentation/powerpc/papr_hcalls.rst                            |    2 -
 Documentation/powerpc/qe_firmware.rst                            |    4 +-
 Documentation/powerpc/vas-api.rst                                |    4 +-
 Documentation/s390/pci.rst                                       |    4 +-
 Documentation/s390/vfio-ccw.rst                                  |    2 -
 Documentation/scheduler/sched-bwc.rst                            |    2 -
 Documentation/scheduler/sched-energy.rst                         |    4 +-
 Documentation/security/digsig.rst                                |    4 +-
 Documentation/security/keys/core.rst                             |    2 -
 Documentation/security/secrets/coco.rst                          |    2 -
 Documentation/sound/alsa-configuration.rst                       |    8 ++--
 Documentation/sound/cards/audigy-mixer.rst                       |    2 -
 Documentation/sound/cards/maya44.rst                             |    2 -
 Documentation/sound/cards/sb-live-mixer.rst                      |    2 -
 Documentation/sound/designs/jack-controls.rst                    |    2 -
 Documentation/sound/designs/seq-oss.rst                          |    2 -
 Documentation/sound/hd-audio/notes.rst                           |    2 -
 Documentation/spi/pxa2xx.rst                                     |   12 +++---
 Documentation/spi/spi-lm70llp.rst                                |    2 -
 Documentation/spi/spi-summary.rst                                |    2 -
 Documentation/target/tcmu-design.rst                             |    2 -
 Documentation/timers/hrtimers.rst                                |    2 -
 Documentation/tools/rtla/rtla-timerlat-top.rst                   |    2 -
 Documentation/trace/coresight/coresight-etm4x-reference.rst      |    2 -
 Documentation/trace/events.rst                                   |    6 +--
 Documentation/trace/fprobe.rst                                   |    2 -
 Documentation/trace/ftrace-uses.rst                              |    2 -
 Documentation/trace/hwlat_detector.rst                           |    2 -
 Documentation/trace/rv/runtime-verification.rst                  |    2 -
 Documentation/trace/uprobetracer.rst                             |    2 -
 Documentation/usb/chipidea.rst                                   |   19 +++++-----
 Documentation/usb/gadget-testing.rst                             |    2 -
 Documentation/usb/mass-storage.rst                               |    2 -
 Documentation/w1/w1-netlink.rst                                  |    2 -
 Documentation/x86/boot.rst                                       |    2 -
 Documentation/x86/buslock.rst                                    |    2 -
 Documentation/x86/mds.rst                                        |    2 -
 Documentation/x86/resctrl.rst                                    |    2 -
 Documentation/x86/sgx.rst                                        |    2 -
 Documentation/xtensa/atomctl.rst                                 |    2 -
 89 files changed, 124 insertions(+), 123 deletions(-)


Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Wolfram Sang <wsa@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Lee Jones <lee@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Len Brown <len.brown@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>

Cc: alsa-devel@alsa-project.org
Cc: coresight@lists.linaro.org
Cc: bpf@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: isdn4linux@listserv.isdn4linux.de
Cc: keyrings@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-block@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-sgx@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Cc: live-patching@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: openrisc@lists.librecores.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: x86@kernel.org

[PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Randy Dunlap]

Correct many spelling errors in Documentation/ as reported by codespell.

Maintainers of specific kernel subsystems are only Cc-ed on their
respective patches, not the entire series. [if all goes well]

These patches are based on linux-next-20230125.


 [PATCH 01/35] Documentation: arm64: correct spelling
 [PATCH 02/35] Documentation: arm: correct spelling
 [PATCH 03/35] Documentation: block: correct spelling
 [PATCH 04/35] Documentation: bpf: correct spelling
 [PATCH 05/35] Documentation: core-api: correct spelling
 [PATCH 06/35] Documentation: fault-injection: correct spelling
 [PATCH 07/35] Documentation: fb: correct spelling
 [PATCH 08/35] Documentation: features: correct spelling
 [PATCH 09/35] Documentation: firmware-guide/acpi: correct spelling
 [PATCH 10/35] Documentation: hid: correct spelling
 [PATCH 11/35] Documentation: i2c: correct spelling
 [PATCH 12/35] Documentation: input: correct spelling
 [PATCH 13/35] Documentation: isdn: correct spelling
 [PATCH 14/35] Documentation: leds: correct spelling
 [PATCH 15/35] Documentation: litmus-tests: correct spelling
 [PATCH 16/35] Documentation: livepatch: correct spelling
 [PATCH 17/35] Documentation: locking: correct spelling
 [PATCH 18/35] Documentation: mm: correct spelling
 [PATCH 19/35] Documentation: openrisc: correct spelling
 [PATCH 20/35] Documentation: PCI: correct spelling
 [PATCH 21/35] Documentation: powerpc: correct spelling
 [PATCH 22/35] Documentation: power: correct spelling
 [PATCH 23/35] Documentation: s390: correct spelling
 [PATCH 24/35] Documentation: scheduler: correct spelling
 [PATCH 25/35] Documentation: security: correct spelling
 [PATCH 26/35] Documentation: sound: correct spelling
 [PATCH 27/35] Documentation: spi: correct spelling
 [PATCH 28/35] Documentation: target: correct spelling
 [PATCH 29/35] Documentation: timers: correct spelling
 [PATCH 30/35] Documentation: tools/rtla: correct spelling
 [PATCH 31/35] Documentation: trace: correct spelling
 [PATCH 32/35] Documentation: usb: correct spelling
 [PATCH 33/35] Documentation: w1: correct spelling
 [PATCH 34/35] Documentation: x86: correct spelling
 [PATCH 35/35] Documentation: xtensa: correct spelling


 Documentation/PCI/endpoint/pci-vntb-howto.rst                    |    2 -
 Documentation/PCI/msi-howto.rst                                  |    2 -
 Documentation/arm/arm.rst                                        |    2 -
 Documentation/arm/ixp4xx.rst                                     |    4 +-
 Documentation/arm/keystone/knav-qmss.rst                         |    2 -
 Documentation/arm/stm32/stm32-dma-mdma-chaining.rst              |    6 +--
 Documentation/arm/sunxi/clocks.rst                               |    2 -
 Documentation/arm/swp_emulation.rst                              |    2 -
 Documentation/arm/tcm.rst                                        |    2 -
 Documentation/arm/vlocks.rst                                     |    2 -
 Documentation/arm64/booting.rst                                  |    2 -
 Documentation/arm64/elf_hwcaps.rst                               |    2 -
 Documentation/arm64/sve.rst                                      |    4 +-
 Documentation/block/data-integrity.rst                           |    2 -
 Documentation/bpf/libbpf/libbpf_naming_convention.rst            |    6 +--
 Documentation/bpf/map_xskmap.rst                                 |    2 -
 Documentation/bpf/ringbuf.rst                                    |    4 +-
 Documentation/bpf/verifier.rst                                   |    2 -
 Documentation/core-api/packing.rst                               |    2 -
 Documentation/core-api/padata.rst                                |    2 -
 Documentation/fault-injection/fault-injection.rst                |    2 -
 Documentation/fb/sm712fb.rst                                     |    2 -
 Documentation/fb/sstfb.rst                                       |    2 -
 Documentation/features/core/thread-info-in-task/arch-support.txt |    2 -
 Documentation/firmware-guide/acpi/acpi-lid.rst                   |    2 -
 Documentation/firmware-guide/acpi/namespace.rst                  |    2 -
 Documentation/hid/hid-alps.rst                                   |    2 -
 Documentation/hid/hid-bpf.rst                                    |    2 -
 Documentation/hid/hiddev.rst                                     |    2 -
 Documentation/hid/hidraw.rst                                     |    2 -
 Documentation/hid/intel-ish-hid.rst                              |    2 -
 Documentation/i2c/gpio-fault-injection.rst                       |    2 -
 Documentation/i2c/smbus-protocol.rst                             |    2 -
 Documentation/input/devices/iforce-protocol.rst                  |    2 -
 Documentation/input/multi-touch-protocol.rst                     |    2 -
 Documentation/isdn/interface_capi.rst                            |    2 -
 Documentation/isdn/m_isdn.rst                                    |    2 -
 Documentation/leds/leds-qcom-lpg.rst                             |    4 +-
 Documentation/litmus-tests/README                                |    2 -
 Documentation/livepatch/reliable-stacktrace.rst                  |    2 -
 Documentation/locking/lockdep-design.rst                         |    4 +-
 Documentation/locking/locktorture.rst                            |    2 -
 Documentation/locking/locktypes.rst                              |    2 -
 Documentation/locking/preempt-locking.rst                        |    2 -
 Documentation/mm/hmm.rst                                         |    4 +-
 Documentation/mm/hwpoison.rst                                    |    2 -
 Documentation/openrisc/openrisc_port.rst                         |    4 +-
 Documentation/power/suspend-and-interrupts.rst                   |    2 -
 Documentation/powerpc/kasan.txt                                  |    2 -
 Documentation/powerpc/papr_hcalls.rst                            |    2 -
 Documentation/powerpc/qe_firmware.rst                            |    4 +-
 Documentation/powerpc/vas-api.rst                                |    4 +-
 Documentation/s390/pci.rst                                       |    4 +-
 Documentation/s390/vfio-ccw.rst                                  |    2 -
 Documentation/scheduler/sched-bwc.rst                            |    2 -
 Documentation/scheduler/sched-energy.rst                         |    4 +-
 Documentation/security/digsig.rst                                |    4 +-
 Documentation/security/keys/core.rst                             |    2 -
 Documentation/security/secrets/coco.rst                          |    2 -
 Documentation/sound/alsa-configuration.rst                       |    8 ++--
 Documentation/sound/cards/audigy-mixer.rst                       |    2 -
 Documentation/sound/cards/maya44.rst                             |    2 -
 Documentation/sound/cards/sb-live-mixer.rst                      |    2 -
 Documentation/sound/designs/jack-controls.rst                    |    2 -
 Documentation/sound/designs/seq-oss.rst                          |    2 -
 Documentation/sound/hd-audio/notes.rst                           |    2 -
 Documentation/spi/pxa2xx.rst                                     |   12 +++---
 Documentation/spi/spi-lm70llp.rst                                |    2 -
 Documentation/spi/spi-summary.rst                                |    2 -
 Documentation/target/tcmu-design.rst                             |    2 -
 Documentation/timers/hrtimers.rst                                |    2 -
 Documentation/tools/rtla/rtla-timerlat-top.rst                   |    2 -
 Documentation/trace/coresight/coresight-etm4x-reference.rst      |    2 -
 Documentation/trace/events.rst                                   |    6 +--
 Documentation/trace/fprobe.rst                                   |    2 -
 Documentation/trace/ftrace-uses.rst                              |    2 -
 Documentation/trace/hwlat_detector.rst                           |    2 -
 Documentation/trace/rv/runtime-verification.rst                  |    2 -
 Documentation/trace/uprobetracer.rst                             |    2 -
 Documentation/usb/chipidea.rst                                   |   19 +++++-----
 Documentation/usb/gadget-testing.rst                             |    2 -
 Documentation/usb/mass-storage.rst                               |    2 -
 Documentation/w1/w1-netlink.rst                                  |    2 -
 Documentation/x86/boot.rst                                       |    2 -
 Documentation/x86/buslock.rst                                    |    2 -
 Documentation/x86/mds.rst                                        |    2 -
 Documentation/x86/resctrl.rst                                    |    2 -
 Documentation/x86/sgx.rst                                        |    2 -
 Documentation/xtensa/atomctl.rst                                 |    2 -
 89 files changed, 124 insertions(+), 123 deletions(-)


Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Wolfram Sang <wsa@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Lee Jones <lee@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Len Brown <len.brown@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>

Cc: alsa-devel@alsa-project.org
Cc: coresight@lists.linaro.org
Cc: bpf@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: isdn4linux@listserv.isdn4linux.de
Cc: keyrings@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-block@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-sgx@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Cc: live-patching@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: openrisc@lists.librecores.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: x86@kernel.org

[PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Randy Dunlap]

Correct many spelling errors in Documentation/ as reported by codespell.

Maintainers of specific kernel subsystems are only Cc-ed on their
respective patches, not the entire series. [if all goes well]

These patches are based on linux-next-20230125.


 [PATCH 01/35] Documentation: arm64: correct spelling
 [PATCH 02/35] Documentation: arm: correct spelling
 [PATCH 03/35] Documentation: block: correct spelling
 [PATCH 04/35] Documentation: bpf: correct spelling
 [PATCH 05/35] Documentation: core-api: correct spelling
 [PATCH 06/35] Documentation: fault-injection: correct spelling
 [PATCH 07/35] Documentation: fb: correct spelling
 [PATCH 08/35] Documentation: features: correct spelling
 [PATCH 09/35] Documentation: firmware-guide/acpi: correct spelling
 [PATCH 10/35] Documentation: hid: correct spelling
 [PATCH 11/35] Documentation: i2c: correct spelling
 [PATCH 12/35] Documentation: input: correct spelling
 [PATCH 13/35] Documentation: isdn: correct spelling
 [PATCH 14/35] Documentation: leds: correct spelling
 [PATCH 15/35] Documentation: litmus-tests: correct spelling
 [PATCH 16/35] Documentation: livepatch: correct spelling
 [PATCH 17/35] Documentation: locking: correct spelling
 [PATCH 18/35] Documentation: mm: correct spelling
 [PATCH 19/35] Documentation: openrisc: correct spelling
 [PATCH 20/35] Documentation: PCI: correct spelling
 [PATCH 21/35] Documentation: powerpc: correct spelling
 [PATCH 22/35] Documentation: power: correct spelling
 [PATCH 23/35] Documentation: s390: correct spelling
 [PATCH 24/35] Documentation: scheduler: correct spelling
 [PATCH 25/35] Documentation: security: correct spelling
 [PATCH 26/35] Documentation: sound: correct spelling
 [PATCH 27/35] Documentation: spi: correct spelling
 [PATCH 28/35] Documentation: target: correct spelling
 [PATCH 29/35] Documentation: timers: correct spelling
 [PATCH 30/35] Documentation: tools/rtla: correct spelling
 [PATCH 31/35] Documentation: trace: correct spelling
 [PATCH 32/35] Documentation: usb: correct spelling
 [PATCH 33/35] Documentation: w1: correct spelling
 [PATCH 34/35] Documentation: x86: correct spelling
 [PATCH 35/35] Documentation: xtensa: correct spelling


 Documentation/PCI/endpoint/pci-vntb-howto.rst                    |    2 -
 Documentation/PCI/msi-howto.rst                                  |    2 -
 Documentation/arm/arm.rst                                        |    2 -
 Documentation/arm/ixp4xx.rst                                     |    4 +-
 Documentation/arm/keystone/knav-qmss.rst                         |    2 -
 Documentation/arm/stm32/stm32-dma-mdma-chaining.rst              |    6 +--
 Documentation/arm/sunxi/clocks.rst                               |    2 -
 Documentation/arm/swp_emulation.rst                              |    2 -
 Documentation/arm/tcm.rst                                        |    2 -
 Documentation/arm/vlocks.rst                                     |    2 -
 Documentation/arm64/booting.rst                                  |    2 -
 Documentation/arm64/elf_hwcaps.rst                               |    2 -
 Documentation/arm64/sve.rst                                      |    4 +-
 Documentation/block/data-integrity.rst                           |    2 -
 Documentation/bpf/libbpf/libbpf_naming_convention.rst            |    6 +--
 Documentation/bpf/map_xskmap.rst                                 |    2 -
 Documentation/bpf/ringbuf.rst                                    |    4 +-
 Documentation/bpf/verifier.rst                                   |    2 -
 Documentation/core-api/packing.rst                               |    2 -
 Documentation/core-api/padata.rst                                |    2 -
 Documentation/fault-injection/fault-injection.rst                |    2 -
 Documentation/fb/sm712fb.rst                                     |    2 -
 Documentation/fb/sstfb.rst                                       |    2 -
 Documentation/features/core/thread-info-in-task/arch-support.txt |    2 -
 Documentation/firmware-guide/acpi/acpi-lid.rst                   |    2 -
 Documentation/firmware-guide/acpi/namespace.rst                  |    2 -
 Documentation/hid/hid-alps.rst                                   |    2 -
 Documentation/hid/hid-bpf.rst                                    |    2 -
 Documentation/hid/hiddev.rst                                     |    2 -
 Documentation/hid/hidraw.rst                                     |    2 -
 Documentation/hid/intel-ish-hid.rst                              |    2 -
 Documentation/i2c/gpio-fault-injection.rst                       |    2 -
 Documentation/i2c/smbus-protocol.rst                             |    2 -
 Documentation/input/devices/iforce-protocol.rst                  |    2 -
 Documentation/input/multi-touch-protocol.rst                     |    2 -
 Documentation/isdn/interface_capi.rst                            |    2 -
 Documentation/isdn/m_isdn.rst                                    |    2 -
 Documentation/leds/leds-qcom-lpg.rst                             |    4 +-
 Documentation/litmus-tests/README                                |    2 -
 Documentation/livepatch/reliable-stacktrace.rst                  |    2 -
 Documentation/locking/lockdep-design.rst                         |    4 +-
 Documentation/locking/locktorture.rst                            |    2 -
 Documentation/locking/locktypes.rst                              |    2 -
 Documentation/locking/preempt-locking.rst                        |    2 -
 Documentation/mm/hmm.rst                                         |    4 +-
 Documentation/mm/hwpoison.rst                                    |    2 -
 Documentation/openrisc/openrisc_port.rst                         |    4 +-
 Documentation/power/suspend-and-interrupts.rst                   |    2 -
 Documentation/powerpc/kasan.txt                                  |    2 -
 Documentation/powerpc/papr_hcalls.rst                            |    2 -
 Documentation/powerpc/qe_firmware.rst                            |    4 +-
 Documentation/powerpc/vas-api.rst                                |    4 +-
 Documentation/s390/pci.rst                                       |    4 +-
 Documentation/s390/vfio-ccw.rst                                  |    2 -
 Documentation/scheduler/sched-bwc.rst                            |    2 -
 Documentation/scheduler/sched-energy.rst                         |    4 +-
 Documentation/security/digsig.rst                                |    4 +-
 Documentation/security/keys/core.rst                             |    2 -
 Documentation/security/secrets/coco.rst                          |    2 -
 Documentation/sound/alsa-configuration.rst                       |    8 ++--
 Documentation/sound/cards/audigy-mixer.rst                       |    2 -
 Documentation/sound/cards/maya44.rst                             |    2 -
 Documentation/sound/cards/sb-live-mixer.rst                      |    2 -
 Documentation/sound/designs/jack-controls.rst                    |    2 -
 Documentation/sound/designs/seq-oss.rst                          |    2 -
 Documentation/sound/hd-audio/notes.rst                           |    2 -
 Documentation/spi/pxa2xx.rst                                     |   12 +++---
 Documentation/spi/spi-lm70llp.rst                                |    2 -
 Documentation/spi/spi-summary.rst                                |    2 -
 Documentation/target/tcmu-design.rst                             |    2 -
 Documentation/timers/hrtimers.rst                                |    2 -
 Documentation/tools/rtla/rtla-timerlat-top.rst                   |    2 -
 Documentation/trace/coresight/coresight-etm4x-reference.rst      |    2 -
 Documentation/trace/events.rst                                   |    6 +--
 Documentation/trace/fprobe.rst                                   |    2 -
 Documentation/trace/ftrace-uses.rst                              |    2 -
 Documentation/trace/hwlat_detector.rst                           |    2 -
 Documentation/trace/rv/runtime-verification.rst                  |    2 -
 Documentation/trace/uprobetracer.rst                             |    2 -
 Documentation/usb/chipidea.rst                                   |   19 +++++-----
 Documentation/usb/gadget-testing.rst                             |    2 -
 Documentation/usb/mass-storage.rst                               |    2 -
 Documentation/w1/w1-netlink.rst                                  |    2 -
 Documentation/x86/boot.rst                                       |    2 -
 Documentation/x86/buslock.rst                                    |    2 -
 Documentation/x86/mds.rst                                        |    2 -
 Documentation/x86/resctrl.rst                                    |    2 -
 Documentation/x86/sgx.rst                                        |    2 -
 Documentation/xtensa/atomctl.rst                                 |    2 -
 89 files changed, 124 insertions(+), 123 deletions(-)


Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Wolfram Sang <wsa@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Lee Jones <lee@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Len Brown <len.brown@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>

Cc: alsa-devel@alsa-project.org
Cc: coresight@lists.linaro.org
Cc: bpf@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: isdn4linux@listserv.isdn4linux.de
Cc: keyrings@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-block@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-sgx@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Cc: live-patching@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: openrisc@lists.librecores.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: x86@kernel.org

[PATCH 02/35] Documentation: arm: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/arm/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/arm/arm.rst                           |    2 +-
 Documentation/arm/ixp4xx.rst                        |    4 ++--
 Documentation/arm/keystone/knav-qmss.rst            |    2 +-
 Documentation/arm/stm32/stm32-dma-mdma-chaining.rst |    6 +++---
 Documentation/arm/sunxi/clocks.rst                  |    2 +-
 Documentation/arm/swp_emulation.rst                 |    2 +-
 Documentation/arm/tcm.rst                           |    2 +-
 Documentation/arm/vlocks.rst                        |    2 +-
 8 files changed, 11 insertions(+), 11 deletions(-)

diff -- a/Documentation/arm/ixp4xx.rst b/Documentation/arm/ixp4xx.rst
--- a/Documentation/arm/ixp4xx.rst
+++ b/Documentation/arm/ixp4xx.rst
@@ -78,9 +78,9 @@ IXP4xx provides two methods of accessing
 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
    To access PCI via this space, we simply ioremap() the BAR
    into the kernel and we can use the standard read[bwl]/write[bwl]
-   macros. This is the preffered method due to speed but it
+   macros. This is the preferred method due to speed but it
    limits the system to just 64MB of PCI memory. This can be
-   problamatic if using video cards and other memory-heavy devices.
+   problematic if using video cards and other memory-heavy devices.
 
 2) If > 64MB of memory space is required, the IXP4xx can be
    configured to use indirect registers to access PCI This allows
diff -- a/Documentation/arm/swp_emulation.rst b/Documentation/arm/swp_emulation.rst
--- a/Documentation/arm/swp_emulation.rst
+++ b/Documentation/arm/swp_emulation.rst
@@ -1,7 +1,7 @@
 Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
 ---------------------------------------------------------------------
 
-ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
+ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommends
 moving to the load-locked/store-conditional instructions LDREX and STREX.
 
 ARMv7 multiprocessing extensions introduce the ability to disable these
diff -- a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
--- a/Documentation/arm/tcm.rst
+++ b/Documentation/arm/tcm.rst
@@ -71,7 +71,7 @@ in <asm/tcm.h>. Using this interface it
 
 - Have the remaining TCM RAM added to a special
   allocation pool with gen_pool_create() and gen_pool_add()
-  and provice tcm_alloc() and tcm_free() for this
+  and provide tcm_alloc() and tcm_free() for this
   memory. Such a heap is great for things like saving
   device state when shutting off device power domains.
 
diff -- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
--- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
+++ b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
@@ -359,7 +359,7 @@ Driver updates for STM32 DMA-MDMA chaini
     descriptor you want a callback to be called at the end of the transfer
     (dmaengine_prep_slave_sg()) or the period (dmaengine_prep_dma_cyclic()).
     Depending on the direction, set the callback on the descriptor that finishes
-    the overal transfer:
+    the overall transfer:
 
     * DMA_DEV_TO_MEM: set the callback on the "MDMA" descriptor
     * DMA_MEM_TO_DEV: set the callback on the "DMA" descriptor
@@ -371,7 +371,7 @@ Driver updates for STM32 DMA-MDMA chaini
   As STM32 MDMA channel transfer is triggered by STM32 DMA, you must issue
   STM32 MDMA channel before STM32 DMA channel.
 
-  If any, your callback will be called to warn you about the end of the overal
+  If any, your callback will be called to warn you about the end of the overall
   transfer or the period completion.
 
   Don't forget to terminate both channels. STM32 DMA channel is configured in
@@ -412,4 +412,4 @@ Resources
 
 :Authors:
 
-- Amelie Delaunay <amelie.delaunay@foss.st.com>
\ No newline at end of file
+- Amelie Delaunay <amelie.delaunay@foss.st.com>
diff -- a/Documentation/arm/arm.rst b/Documentation/arm/arm.rst
--- a/Documentation/arm/arm.rst
+++ b/Documentation/arm/arm.rst
@@ -141,7 +141,7 @@ ST506 hard drives
   `*configure` harddrive set to 2). I've got an internal 20MB and a great
   big external 5.25" FH 64MB drive (who could ever want more :-) ).
 
-  I've just got 240K/s off it (a dd with bs=128k); thats about half of what
+  I've just got 240K/s off it (a dd with bs=128k); that's about half of what
   RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
   last week :-)
 
diff -- a/Documentation/arm/keystone/knav-qmss.rst b/Documentation/arm/keystone/knav-qmss.rst
--- a/Documentation/arm/keystone/knav-qmss.rst
+++ b/Documentation/arm/keystone/knav-qmss.rst
@@ -39,7 +39,7 @@ CPPI/QMSS Low Level Driver document (doc
 
 	git://git.ti.com/keystone-rtos/qmss-lld.git
 
-k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
+k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports up to 48 accumulator
 channels. This firmware is available under ti-keystone folder of
 firmware.git at
 
diff -- a/Documentation/arm/sunxi/clocks.rst b/Documentation/arm/sunxi/clocks.rst
--- a/Documentation/arm/sunxi/clocks.rst
+++ b/Documentation/arm/sunxi/clocks.rst
@@ -5,7 +5,7 @@ Frequently asked questions about the sun
 This document contains useful bits of information that people tend to ask
 about the sunxi clock system, as well as accompanying ASCII art when adequate.
 
-Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+Q: Why is the main 24MHz oscillator gateable? Wouldn't that break the
    system?
 
 A: The 24MHz oscillator allows gating to save power. Indeed, if gated
diff -- a/Documentation/arm/vlocks.rst b/Documentation/arm/vlocks.rst
--- a/Documentation/arm/vlocks.rst
+++ b/Documentation/arm/vlocks.rst
@@ -155,7 +155,7 @@ the basic algorithm:
    optimisation.
 
    If there are too many CPUs to read the currently_voting array in
-   one transaction then multiple transations are still required.  The
+   one transaction then multiple transactions are still required.  The
    implementation uses a simple loop of word-sized loads for this
    case.  The number of transactions is still fewer than would be
    required if bytes were loaded individually.

[PATCH 02/35] Documentation: arm: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/arm/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/arm/arm.rst                           |    2 +-
 Documentation/arm/ixp4xx.rst                        |    4 ++--
 Documentation/arm/keystone/knav-qmss.rst            |    2 +-
 Documentation/arm/stm32/stm32-dma-mdma-chaining.rst |    6 +++---
 Documentation/arm/sunxi/clocks.rst                  |    2 +-
 Documentation/arm/swp_emulation.rst                 |    2 +-
 Documentation/arm/tcm.rst                           |    2 +-
 Documentation/arm/vlocks.rst                        |    2 +-
 8 files changed, 11 insertions(+), 11 deletions(-)

diff -- a/Documentation/arm/ixp4xx.rst b/Documentation/arm/ixp4xx.rst
--- a/Documentation/arm/ixp4xx.rst
+++ b/Documentation/arm/ixp4xx.rst
@@ -78,9 +78,9 @@ IXP4xx provides two methods of accessing
 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
    To access PCI via this space, we simply ioremap() the BAR
    into the kernel and we can use the standard read[bwl]/write[bwl]
-   macros. This is the preffered method due to speed but it
+   macros. This is the preferred method due to speed but it
    limits the system to just 64MB of PCI memory. This can be
-   problamatic if using video cards and other memory-heavy devices.
+   problematic if using video cards and other memory-heavy devices.
 
 2) If > 64MB of memory space is required, the IXP4xx can be
    configured to use indirect registers to access PCI This allows
diff -- a/Documentation/arm/swp_emulation.rst b/Documentation/arm/swp_emulation.rst
--- a/Documentation/arm/swp_emulation.rst
+++ b/Documentation/arm/swp_emulation.rst
@@ -1,7 +1,7 @@
 Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
 ---------------------------------------------------------------------
 
-ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
+ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommends
 moving to the load-locked/store-conditional instructions LDREX and STREX.
 
 ARMv7 multiprocessing extensions introduce the ability to disable these
diff -- a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
--- a/Documentation/arm/tcm.rst
+++ b/Documentation/arm/tcm.rst
@@ -71,7 +71,7 @@ in <asm/tcm.h>. Using this interface it
 
 - Have the remaining TCM RAM added to a special
   allocation pool with gen_pool_create() and gen_pool_add()
-  and provice tcm_alloc() and tcm_free() for this
+  and provide tcm_alloc() and tcm_free() for this
   memory. Such a heap is great for things like saving
   device state when shutting off device power domains.
 
diff -- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
--- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
+++ b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
@@ -359,7 +359,7 @@ Driver updates for STM32 DMA-MDMA chaini
     descriptor you want a callback to be called at the end of the transfer
     (dmaengine_prep_slave_sg()) or the period (dmaengine_prep_dma_cyclic()).
     Depending on the direction, set the callback on the descriptor that finishes
-    the overal transfer:
+    the overall transfer:
 
     * DMA_DEV_TO_MEM: set the callback on the "MDMA" descriptor
     * DMA_MEM_TO_DEV: set the callback on the "DMA" descriptor
@@ -371,7 +371,7 @@ Driver updates for STM32 DMA-MDMA chaini
   As STM32 MDMA channel transfer is triggered by STM32 DMA, you must issue
   STM32 MDMA channel before STM32 DMA channel.
 
-  If any, your callback will be called to warn you about the end of the overal
+  If any, your callback will be called to warn you about the end of the overall
   transfer or the period completion.
 
   Don't forget to terminate both channels. STM32 DMA channel is configured in
@@ -412,4 +412,4 @@ Resources
 
 :Authors:
 
-- Amelie Delaunay <amelie.delaunay@foss.st.com>
\ No newline at end of file
+- Amelie Delaunay <amelie.delaunay@foss.st.com>
diff -- a/Documentation/arm/arm.rst b/Documentation/arm/arm.rst
--- a/Documentation/arm/arm.rst
+++ b/Documentation/arm/arm.rst
@@ -141,7 +141,7 @@ ST506 hard drives
   `*configure` harddrive set to 2). I've got an internal 20MB and a great
   big external 5.25" FH 64MB drive (who could ever want more :-) ).
 
-  I've just got 240K/s off it (a dd with bs=128k); thats about half of what
+  I've just got 240K/s off it (a dd with bs=128k); that's about half of what
   RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
   last week :-)
 
diff -- a/Documentation/arm/keystone/knav-qmss.rst b/Documentation/arm/keystone/knav-qmss.rst
--- a/Documentation/arm/keystone/knav-qmss.rst
+++ b/Documentation/arm/keystone/knav-qmss.rst
@@ -39,7 +39,7 @@ CPPI/QMSS Low Level Driver document (doc
 
 	git://git.ti.com/keystone-rtos/qmss-lld.git
 
-k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
+k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports up to 48 accumulator
 channels. This firmware is available under ti-keystone folder of
 firmware.git at
 
diff -- a/Documentation/arm/sunxi/clocks.rst b/Documentation/arm/sunxi/clocks.rst
--- a/Documentation/arm/sunxi/clocks.rst
+++ b/Documentation/arm/sunxi/clocks.rst
@@ -5,7 +5,7 @@ Frequently asked questions about the sun
 This document contains useful bits of information that people tend to ask
 about the sunxi clock system, as well as accompanying ASCII art when adequate.
 
-Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+Q: Why is the main 24MHz oscillator gateable? Wouldn't that break the
    system?
 
 A: The 24MHz oscillator allows gating to save power. Indeed, if gated
diff -- a/Documentation/arm/vlocks.rst b/Documentation/arm/vlocks.rst
--- a/Documentation/arm/vlocks.rst
+++ b/Documentation/arm/vlocks.rst
@@ -155,7 +155,7 @@ the basic algorithm:
    optimisation.
 
    If there are too many CPUs to read the currently_voting array in
-   one transaction then multiple transations are still required.  The
+   one transaction then multiple transactions are still required.  The
    implementation uses a simple loop of word-sized loads for this
    case.  The number of transactions is still fewer than would be
    required if bytes were loaded individually.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 02/35] Documentation: arm: correct spelling

[Mukesh Ojha]

Hi,

Thanks for the patch.

On 1/27/2023 12:09 PM, Randy Dunlap wrote:
> Correct spelling problems for Documentation/arm/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>   Documentation/arm/arm.rst                           |    2 +-
>   Documentation/arm/ixp4xx.rst                        |    4 ++--
>   Documentation/arm/keystone/knav-qmss.rst            |    2 +-
>   Documentation/arm/stm32/stm32-dma-mdma-chaining.rst |    6 +++---
>   Documentation/arm/sunxi/clocks.rst                  |    2 +-
>   Documentation/arm/swp_emulation.rst                 |    2 +-
>   Documentation/arm/tcm.rst                           |    2 +-
>   Documentation/arm/vlocks.rst                        |    2 +-
>   8 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff -- a/Documentation/arm/ixp4xx.rst b/Documentation/arm/ixp4xx.rst
> --- a/Documentation/arm/ixp4xx.rst
> +++ b/Documentation/arm/ixp4xx.rst
> @@ -78,9 +78,9 @@ IXP4xx provides two methods of accessing
>   1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
>      To access PCI via this space, we simply ioremap() the BAR
>      into the kernel and we can use the standard read[bwl]/write[bwl]
> -   macros. This is the preffered method due to speed but it
> +   macros. This is the preferred method due to speed but it
>      limits the system to just 64MB of PCI memory. This can be
> -   problamatic if using video cards and other memory-heavy devices.
> +   problematic if using video cards and other memory-heavy devices.
>   
>   2) If > 64MB of memory space is required, the IXP4xx can be
>      configured to use indirect registers to access PCI This allows
> diff -- a/Documentation/arm/swp_emulation.rst b/Documentation/arm/swp_emulation.rst
> --- a/Documentation/arm/swp_emulation.rst
> +++ b/Documentation/arm/swp_emulation.rst
> @@ -1,7 +1,7 @@
>   Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
>   ---------------------------------------------------------------------
>   
> -ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
> +ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommends
>   moving to the load-locked/store-conditional instructions LDREX and STREX.
>   
>   ARMv7 multiprocessing extensions introduce the ability to disable these
> diff -- a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
> --- a/Documentation/arm/tcm.rst
> +++ b/Documentation/arm/tcm.rst
> @@ -71,7 +71,7 @@ in <asm/tcm.h>. Using this interface it
>   
>   - Have the remaining TCM RAM added to a special
>     allocation pool with gen_pool_create() and gen_pool_add()
> -  and provice tcm_alloc() and tcm_free() for this
> +  and provide tcm_alloc() and tcm_free() for this
>     memory. Such a heap is great for things like saving
>     device state when shutting off device power domains.
>   
> diff -- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> --- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> +++ b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> @@ -359,7 +359,7 @@ Driver updates for STM32 DMA-MDMA chaini
>       descriptor you want a callback to be called at the end of the transfer
>       (dmaengine_prep_slave_sg()) or the period (dmaengine_prep_dma_cyclic()).
>       Depending on the direction, set the callback on the descriptor that finishes
> -    the overal transfer:
> +    the overall transfer:
>   
>       * DMA_DEV_TO_MEM: set the callback on the "MDMA" descriptor
>       * DMA_MEM_TO_DEV: set the callback on the "DMA" descriptor
> @@ -371,7 +371,7 @@ Driver updates for STM32 DMA-MDMA chaini
>     As STM32 MDMA channel transfer is triggered by STM32 DMA, you must issue
>     STM32 MDMA channel before STM32 DMA channel.
>   
> -  If any, your callback will be called to warn you about the end of the overal
> +  If any, your callback will be called to warn you about the end of the overall
>     transfer or the period completion.
>   
>     Don't forget to terminate both channels. STM32 DMA channel is configured in
> @@ -412,4 +412,4 @@ Resources
>   
>   :Authors:
>   
> -- Amelie Delaunay <amelie.delaunay@foss.st.com>
> \ No newline at end of file
> +- Amelie Delaunay <amelie.delaunay@foss.st.com>
> diff -- a/Documentation/arm/arm.rst b/Documentation/arm/arm.rst
> --- a/Documentation/arm/arm.rst
> +++ b/Documentation/arm/arm.rst
> @@ -141,7 +141,7 @@ ST506 hard drives
>     `*configure` harddrive set to 2). I've got an internal 20MB and a great
>     big external 5.25" FH 64MB drive (who could ever want more :-) ).
>   
> -  I've just got 240K/s off it (a dd with bs=128k); thats about half of what
> +  I've just got 240K/s off it (a dd with bs=128k); that's about half of what
>     RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
>     last week :-)
>   
> diff -- a/Documentation/arm/keystone/knav-qmss.rst b/Documentation/arm/keystone/knav-qmss.rst
> --- a/Documentation/arm/keystone/knav-qmss.rst
> +++ b/Documentation/arm/keystone/knav-qmss.rst
> @@ -39,7 +39,7 @@ CPPI/QMSS Low Level Driver document (doc
>   
>   	git://git.ti.com/keystone-rtos/qmss-lld.git
>   
> -k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
> +k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports up to 48 accumulator
>   channels. This firmware is available under ti-keystone folder of
>   firmware.git at
>   
> diff -- a/Documentation/arm/sunxi/clocks.rst b/Documentation/arm/sunxi/clocks.rst
> --- a/Documentation/arm/sunxi/clocks.rst
> +++ b/Documentation/arm/sunxi/clocks.rst
> @@ -5,7 +5,7 @@ Frequently asked questions about the sun
>   This document contains useful bits of information that people tend to ask
>   about the sunxi clock system, as well as accompanying ASCII art when adequate.
>   
> -Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
> +Q: Why is the main 24MHz oscillator gateable? Wouldn't that break the
>      system?
>   
>   A: The 24MHz oscillator allows gating to save power. Indeed, if gated
> diff -- a/Documentation/arm/vlocks.rst b/Documentation/arm/vlocks.rst
> --- a/Documentation/arm/vlocks.rst
> +++ b/Documentation/arm/vlocks.rst
> @@ -155,7 +155,7 @@ the basic algorithm:
>      optimisation.
>   
>      If there are too many CPUs to read the currently_voting array in
> -   one transaction then multiple transations are still required.  The
> +   one transaction then multiple transactions are still required.  The
>      implementation uses a simple loop of word-sized loads for this
>      case.  The number of transactions is still fewer than would be
>      required if bytes were loaded individually.
> 

Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh

> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 02/35] Documentation: arm: correct spelling

[Mukesh Ojha]

Hi,

Thanks for the patch.

On 1/27/2023 12:09 PM, Randy Dunlap wrote:
> Correct spelling problems for Documentation/arm/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>   Documentation/arm/arm.rst                           |    2 +-
>   Documentation/arm/ixp4xx.rst                        |    4 ++--
>   Documentation/arm/keystone/knav-qmss.rst            |    2 +-
>   Documentation/arm/stm32/stm32-dma-mdma-chaining.rst |    6 +++---
>   Documentation/arm/sunxi/clocks.rst                  |    2 +-
>   Documentation/arm/swp_emulation.rst                 |    2 +-
>   Documentation/arm/tcm.rst                           |    2 +-
>   Documentation/arm/vlocks.rst                        |    2 +-
>   8 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff -- a/Documentation/arm/ixp4xx.rst b/Documentation/arm/ixp4xx.rst
> --- a/Documentation/arm/ixp4xx.rst
> +++ b/Documentation/arm/ixp4xx.rst
> @@ -78,9 +78,9 @@ IXP4xx provides two methods of accessing
>   1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
>      To access PCI via this space, we simply ioremap() the BAR
>      into the kernel and we can use the standard read[bwl]/write[bwl]
> -   macros. This is the preffered method due to speed but it
> +   macros. This is the preferred method due to speed but it
>      limits the system to just 64MB of PCI memory. This can be
> -   problamatic if using video cards and other memory-heavy devices.
> +   problematic if using video cards and other memory-heavy devices.
>   
>   2) If > 64MB of memory space is required, the IXP4xx can be
>      configured to use indirect registers to access PCI This allows
> diff -- a/Documentation/arm/swp_emulation.rst b/Documentation/arm/swp_emulation.rst
> --- a/Documentation/arm/swp_emulation.rst
> +++ b/Documentation/arm/swp_emulation.rst
> @@ -1,7 +1,7 @@
>   Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
>   ---------------------------------------------------------------------
>   
> -ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
> +ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommends
>   moving to the load-locked/store-conditional instructions LDREX and STREX.
>   
>   ARMv7 multiprocessing extensions introduce the ability to disable these
> diff -- a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
> --- a/Documentation/arm/tcm.rst
> +++ b/Documentation/arm/tcm.rst
> @@ -71,7 +71,7 @@ in <asm/tcm.h>. Using this interface it
>   
>   - Have the remaining TCM RAM added to a special
>     allocation pool with gen_pool_create() and gen_pool_add()
> -  and provice tcm_alloc() and tcm_free() for this
> +  and provide tcm_alloc() and tcm_free() for this
>     memory. Such a heap is great for things like saving
>     device state when shutting off device power domains.
>   
> diff -- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> --- a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> +++ b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
> @@ -359,7 +359,7 @@ Driver updates for STM32 DMA-MDMA chaini
>       descriptor you want a callback to be called at the end of the transfer
>       (dmaengine_prep_slave_sg()) or the period (dmaengine_prep_dma_cyclic()).
>       Depending on the direction, set the callback on the descriptor that finishes
> -    the overal transfer:
> +    the overall transfer:
>   
>       * DMA_DEV_TO_MEM: set the callback on the "MDMA" descriptor
>       * DMA_MEM_TO_DEV: set the callback on the "DMA" descriptor
> @@ -371,7 +371,7 @@ Driver updates for STM32 DMA-MDMA chaini
>     As STM32 MDMA channel transfer is triggered by STM32 DMA, you must issue
>     STM32 MDMA channel before STM32 DMA channel.
>   
> -  If any, your callback will be called to warn you about the end of the overal
> +  If any, your callback will be called to warn you about the end of the overall
>     transfer or the period completion.
>   
>     Don't forget to terminate both channels. STM32 DMA channel is configured in
> @@ -412,4 +412,4 @@ Resources
>   
>   :Authors:
>   
> -- Amelie Delaunay <amelie.delaunay@foss.st.com>
> \ No newline at end of file
> +- Amelie Delaunay <amelie.delaunay@foss.st.com>
> diff -- a/Documentation/arm/arm.rst b/Documentation/arm/arm.rst
> --- a/Documentation/arm/arm.rst
> +++ b/Documentation/arm/arm.rst
> @@ -141,7 +141,7 @@ ST506 hard drives
>     `*configure` harddrive set to 2). I've got an internal 20MB and a great
>     big external 5.25" FH 64MB drive (who could ever want more :-) ).
>   
> -  I've just got 240K/s off it (a dd with bs=128k); thats about half of what
> +  I've just got 240K/s off it (a dd with bs=128k); that's about half of what
>     RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
>     last week :-)
>   
> diff -- a/Documentation/arm/keystone/knav-qmss.rst b/Documentation/arm/keystone/knav-qmss.rst
> --- a/Documentation/arm/keystone/knav-qmss.rst
> +++ b/Documentation/arm/keystone/knav-qmss.rst
> @@ -39,7 +39,7 @@ CPPI/QMSS Low Level Driver document (doc
>   
>   	git://git.ti.com/keystone-rtos/qmss-lld.git
>   
> -k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
> +k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports up to 48 accumulator
>   channels. This firmware is available under ti-keystone folder of
>   firmware.git at
>   
> diff -- a/Documentation/arm/sunxi/clocks.rst b/Documentation/arm/sunxi/clocks.rst
> --- a/Documentation/arm/sunxi/clocks.rst
> +++ b/Documentation/arm/sunxi/clocks.rst
> @@ -5,7 +5,7 @@ Frequently asked questions about the sun
>   This document contains useful bits of information that people tend to ask
>   about the sunxi clock system, as well as accompanying ASCII art when adequate.
>   
> -Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
> +Q: Why is the main 24MHz oscillator gateable? Wouldn't that break the
>      system?
>   
>   A: The 24MHz oscillator allows gating to save power. Indeed, if gated
> diff -- a/Documentation/arm/vlocks.rst b/Documentation/arm/vlocks.rst
> --- a/Documentation/arm/vlocks.rst
> +++ b/Documentation/arm/vlocks.rst
> @@ -155,7 +155,7 @@ the basic algorithm:
>      optimisation.
>   
>      If there are too many CPUs to read the currently_voting array in
> -   one transaction then multiple transations are still required.  The
> +   one transaction then multiple transactions are still required.  The
>      implementation uses a simple loop of word-sized loads for this
>      case.  The number of transactions is still fewer than would be
>      required if bytes were loaded individually.
> 

Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh

> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 01/35] Documentation: arm64: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/arm64/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/arm64/booting.rst    |    2 +-
 Documentation/arm64/elf_hwcaps.rst |    2 +-
 Documentation/arm64/sve.rst        |    4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff -- a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst
--- a/Documentation/arm64/booting.rst
+++ b/Documentation/arm64/booting.rst
@@ -223,7 +223,7 @@ Before jumping into the kernel, the foll
   For systems with a GICv3 interrupt controller to be used in v3 mode:
   - If EL3 is present:
 
-      - ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
+      - ICC_SRE_EL3.Enable (bit 3) must be initialised to 0b1.
       - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
       - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
         all CPUs the kernel is executing on, and must stay constant
diff -- a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst
--- a/Documentation/arm64/elf_hwcaps.rst
+++ b/Documentation/arm64/elf_hwcaps.rst
@@ -14,7 +14,7 @@ Some hardware or software features are o
 implementations, and/or with certain kernel configurations, but have no
 architected discovery mechanism available to userspace code at EL0. The
 kernel exposes the presence of these features to userspace through a set
-of flags called hwcaps, exposed in the auxilliary vector.
+of flags called hwcaps, exposed in the auxiliary vector.
 
 Userspace software can test for features by acquiring the AT_HWCAP or
 AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant
diff -- a/Documentation/arm64/sve.rst b/Documentation/arm64/sve.rst
--- a/Documentation/arm64/sve.rst
+++ b/Documentation/arm64/sve.rst
@@ -175,7 +175,7 @@ the SVE instruction set architecture.
 When returning from a signal handler:
 
 * If there is no sve_context record in the signal frame, or if the record is
-  present but contains no register data as desribed in the previous section,
+  present but contains no register data as described in the previous section,
   then the SVE registers/bits become non-live and take unspecified values.
 
 * If sve_context is present in the signal frame and contains full register
@@ -223,7 +223,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
 	    Defer the requested vector length change until the next execve()
 	    performed by this thread.
 
-	    The effect is equivalent to implicit exceution of the following
+	    The effect is equivalent to implicit execution of the following
 	    call immediately after the next execve() (if any) by the thread:
 
 		prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)

[PATCH 01/35] Documentation: arm64: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/arm64/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/arm64/booting.rst    |    2 +-
 Documentation/arm64/elf_hwcaps.rst |    2 +-
 Documentation/arm64/sve.rst        |    4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff -- a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst
--- a/Documentation/arm64/booting.rst
+++ b/Documentation/arm64/booting.rst
@@ -223,7 +223,7 @@ Before jumping into the kernel, the foll
   For systems with a GICv3 interrupt controller to be used in v3 mode:
   - If EL3 is present:
 
-      - ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
+      - ICC_SRE_EL3.Enable (bit 3) must be initialised to 0b1.
       - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
       - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
         all CPUs the kernel is executing on, and must stay constant
diff -- a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst
--- a/Documentation/arm64/elf_hwcaps.rst
+++ b/Documentation/arm64/elf_hwcaps.rst
@@ -14,7 +14,7 @@ Some hardware or software features are o
 implementations, and/or with certain kernel configurations, but have no
 architected discovery mechanism available to userspace code at EL0. The
 kernel exposes the presence of these features to userspace through a set
-of flags called hwcaps, exposed in the auxilliary vector.
+of flags called hwcaps, exposed in the auxiliary vector.
 
 Userspace software can test for features by acquiring the AT_HWCAP or
 AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant
diff -- a/Documentation/arm64/sve.rst b/Documentation/arm64/sve.rst
--- a/Documentation/arm64/sve.rst
+++ b/Documentation/arm64/sve.rst
@@ -175,7 +175,7 @@ the SVE instruction set architecture.
 When returning from a signal handler:
 
 * If there is no sve_context record in the signal frame, or if the record is
-  present but contains no register data as desribed in the previous section,
+  present but contains no register data as described in the previous section,
   then the SVE registers/bits become non-live and take unspecified values.
 
 * If sve_context is present in the signal frame and contains full register
@@ -223,7 +223,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
 	    Defer the requested vector length change until the next execve()
 	    performed by this thread.
 
-	    The effect is equivalent to implicit exceution of the following
+	    The effect is equivalent to implicit execution of the following
 	    call immediately after the next execve() (if any) by the thread:
 
 		prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 01/35] Documentation: arm64: correct spelling

[Mukesh Ojha]

On 1/27/2023 12:09 PM, Randy Dunlap wrote:
> Correct spelling problems for Documentation/arm64/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will@kernel.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>   Documentation/arm64/booting.rst    |    2 +-
>   Documentation/arm64/elf_hwcaps.rst |    2 +-
>   Documentation/arm64/sve.rst        |    4 ++--
>   3 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff -- a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst
> --- a/Documentation/arm64/booting.rst
> +++ b/Documentation/arm64/booting.rst
> @@ -223,7 +223,7 @@ Before jumping into the kernel, the foll
>     For systems with a GICv3 interrupt controller to be used in v3 mode:
>     - If EL3 is present:
>   
> -      - ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
> +      - ICC_SRE_EL3.Enable (bit 3) must be initialised to 0b1.
>         - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
>         - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
>           all CPUs the kernel is executing on, and must stay constant
> diff -- a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst
> --- a/Documentation/arm64/elf_hwcaps.rst
> +++ b/Documentation/arm64/elf_hwcaps.rst
> @@ -14,7 +14,7 @@ Some hardware or software features are o
>   implementations, and/or with certain kernel configurations, but have no
>   architected discovery mechanism available to userspace code at EL0. The
>   kernel exposes the presence of these features to userspace through a set
> -of flags called hwcaps, exposed in the auxilliary vector.
> +of flags called hwcaps, exposed in the auxiliary vector.
>   
>   Userspace software can test for features by acquiring the AT_HWCAP or
>   AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant
> diff -- a/Documentation/arm64/sve.rst b/Documentation/arm64/sve.rst
> --- a/Documentation/arm64/sve.rst
> +++ b/Documentation/arm64/sve.rst
> @@ -175,7 +175,7 @@ the SVE instruction set architecture.
>   When returning from a signal handler:
>   
>   * If there is no sve_context record in the signal frame, or if the record is
> -  present but contains no register data as desribed in the previous section,
> +  present but contains no register data as described in the previous section,
>     then the SVE registers/bits become non-live and take unspecified values.
>   
>   * If sve_context is present in the signal frame and contains full register
> @@ -223,7 +223,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
>   	    Defer the requested vector length change until the next execve()
>   	    performed by this thread.
>   
> -	    The effect is equivalent to implicit exceution of the following
> +	    The effect is equivalent to implicit execution of the following
>   	    call immediately after the next execve() (if any) by the thread:
>   
>   		prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)
> 

Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh

> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 01/35] Documentation: arm64: correct spelling

[Mukesh Ojha]

On 1/27/2023 12:09 PM, Randy Dunlap wrote:
> Correct spelling problems for Documentation/arm64/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will@kernel.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>   Documentation/arm64/booting.rst    |    2 +-
>   Documentation/arm64/elf_hwcaps.rst |    2 +-
>   Documentation/arm64/sve.rst        |    4 ++--
>   3 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff -- a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst
> --- a/Documentation/arm64/booting.rst
> +++ b/Documentation/arm64/booting.rst
> @@ -223,7 +223,7 @@ Before jumping into the kernel, the foll
>     For systems with a GICv3 interrupt controller to be used in v3 mode:
>     - If EL3 is present:
>   
> -      - ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
> +      - ICC_SRE_EL3.Enable (bit 3) must be initialised to 0b1.
>         - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
>         - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
>           all CPUs the kernel is executing on, and must stay constant
> diff -- a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst
> --- a/Documentation/arm64/elf_hwcaps.rst
> +++ b/Documentation/arm64/elf_hwcaps.rst
> @@ -14,7 +14,7 @@ Some hardware or software features are o
>   implementations, and/or with certain kernel configurations, but have no
>   architected discovery mechanism available to userspace code at EL0. The
>   kernel exposes the presence of these features to userspace through a set
> -of flags called hwcaps, exposed in the auxilliary vector.
> +of flags called hwcaps, exposed in the auxiliary vector.
>   
>   Userspace software can test for features by acquiring the AT_HWCAP or
>   AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant
> diff -- a/Documentation/arm64/sve.rst b/Documentation/arm64/sve.rst
> --- a/Documentation/arm64/sve.rst
> +++ b/Documentation/arm64/sve.rst
> @@ -175,7 +175,7 @@ the SVE instruction set architecture.
>   When returning from a signal handler:
>   
>   * If there is no sve_context record in the signal frame, or if the record is
> -  present but contains no register data as desribed in the previous section,
> +  present but contains no register data as described in the previous section,
>     then the SVE registers/bits become non-live and take unspecified values.
>   
>   * If sve_context is present in the signal frame and contains full register
> @@ -223,7 +223,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
>   	    Defer the requested vector length change until the next execve()
>   	    performed by this thread.
>   
> -	    The effect is equivalent to implicit exceution of the following
> +	    The effect is equivalent to implicit execution of the following
>   	    call immediately after the next execve() (if any) by the thread:
>   
>   		prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)
> 

Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh

> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 03/35] Documentation: block: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/block/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/block/data-integrity.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/block/data-integrity.rst b/Documentation/block/data-integrity.rst
--- a/Documentation/block/data-integrity.rst
+++ b/Documentation/block/data-integrity.rst
@@ -209,7 +209,7 @@ will require extra work due to the appli
       sector must be set, and the bio should have all data pages
       added.  It is up to the caller to ensure that the bio does not
       change while I/O is in progress.
-      Complete bio with error if prepare failed for some reson.
+      Complete bio with error if prepare failed for some reason.
 
 
 5.3 Passing Existing Integrity Metadata

Re: [PATCH 03/35] Documentation: block: correct spelling

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 790 bytes --]

On Thu, Jan 26, 2023 at 10:39:33PM -0800, Randy Dunlap wrote:
> diff -- a/Documentation/block/data-integrity.rst b/Documentation/block/data-integrity.rst
> --- a/Documentation/block/data-integrity.rst
> +++ b/Documentation/block/data-integrity.rst
> @@ -209,7 +209,7 @@ will require extra work due to the appli
>        sector must be set, and the bio should have all data pages
>        added.  It is up to the caller to ensure that the bio does not
>        change while I/O is in progress.
> -      Complete bio with error if prepare failed for some reson.
> +      Complete bio with error if prepare failed for some reason.
>  

So if prepare returns error, bio is completed not successfully but also
errored?

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 03/35] Documentation: block: correct spelling

[Randy Dunlap]

On 1/27/23 00:31, Bagas Sanjaya wrote:
> On Thu, Jan 26, 2023 at 10:39:33PM -0800, Randy Dunlap wrote:
>> diff -- a/Documentation/block/data-integrity.rst b/Documentation/block/data-integrity.rst
>> --- a/Documentation/block/data-integrity.rst
>> +++ b/Documentation/block/data-integrity.rst
>> @@ -209,7 +209,7 @@ will require extra work due to the appli
>>        sector must be set, and the bio should have all data pages
>>        added.  It is up to the caller to ensure that the bio does not
>>        change while I/O is in progress.
>> -      Complete bio with error if prepare failed for some reson.
>> +      Complete bio with error if prepare failed for some reason.
>>  
> 
> So if prepare returns error, bio is completed not successfully but also
> errored?

I think that
>> +      Complete bio with error if prepare failed for some reason.
says that the caller of bio_integrity_prep() should treat the bio as an
error condition. I don't see any guarantee that the bio is completed
as far as adding an integrity payload to it, any more than what the bio
was upon calling bio_integrity_prep().

But I could also be wrong.  :)

-- 
~Randy

Re: [PATCH 03/35] Documentation: block: correct spelling

[Mukesh Ojha]

>Correct spelling problems for Documentation/block/ as reported
>by codespell.
>
>Signed-off-by: Randy Dunlap <rdunlap@infradead.org>

Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh

[PATCH 04/35] Documentation: bpf: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/bpf/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/bpf/libbpf/libbpf_naming_convention.rst |    6 +++---
 Documentation/bpf/map_xskmap.rst                      |    2 +-
 Documentation/bpf/ringbuf.rst                         |    4 ++--
 Documentation/bpf/verifier.rst                        |    2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

diff -- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
--- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst
+++ b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
@@ -83,8 +83,8 @@ This prevents from accidentally exportin
 to be a part of ABI what, in turn, improves both libbpf developer- and
 user-experiences.
 
-ABI versionning
----------------
+ABI versioning
+--------------
 
 To make future ABI extensions possible libbpf ABI is versioned.
 Versioning is implemented by ``libbpf.map`` version script that is
@@ -148,7 +148,7 @@ API documentation convention
 The libbpf API is documented via comments above definitions in
 header files. These comments can be rendered by doxygen and sphinx
 for well organized html output. This section describes the
-convention in which these comments should be formated.
+convention in which these comments should be formatted.
 
 Here is an example from btf.h:
 
diff -- a/Documentation/bpf/map_xskmap.rst b/Documentation/bpf/map_xskmap.rst
--- a/Documentation/bpf/map_xskmap.rst
+++ b/Documentation/bpf/map_xskmap.rst
@@ -178,7 +178,7 @@ The following code snippet shows how to
 
 For an example on how create AF_XDP sockets, please see the AF_XDP-example and
 AF_XDP-forwarding programs in the `bpf-examples`_ directory in the `libxdp`_ repository.
-For a detailed explaination of the AF_XDP interface please see:
+For a detailed explanation of the AF_XDP interface please see:
 
 - `libxdp-readme`_.
 - `AF_XDP`_ kernel documentation.
diff -- a/Documentation/bpf/ringbuf.rst b/Documentation/bpf/ringbuf.rst
--- a/Documentation/bpf/ringbuf.rst
+++ b/Documentation/bpf/ringbuf.rst
@@ -124,7 +124,7 @@ buffer.  Currently 4 are supported:
 
 - ``BPF_RB_AVAIL_DATA`` returns amount of unconsumed data in ring buffer;
 - ``BPF_RB_RING_SIZE`` returns the size of ring buffer;
-- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical possition
+- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical position
   of consumer/producer, respectively.
 
 Returned values are momentarily snapshots of ring buffer state and could be
@@ -146,7 +146,7 @@ Design and Implementation
 This reserve/commit schema allows a natural way for multiple producers, either
 on different CPUs or even on the same CPU/in the same BPF program, to reserve
 independent records and work with them without blocking other producers. This
-means that if BPF program was interruped by another BPF program sharing the
+means that if BPF program was interrupted by another BPF program sharing the
 same ring buffer, they will both get a record reserved (provided there is
 enough space left) and can work with it and submit it independently. This
 applies to NMI context as well, except that due to using a spinlock during
diff -- a/Documentation/bpf/verifier.rst b/Documentation/bpf/verifier.rst
--- a/Documentation/bpf/verifier.rst
+++ b/Documentation/bpf/verifier.rst
@@ -192,7 +192,7 @@ checked and found to be non-NULL, all co
 As well as range-checking, the tracked information is also used for enforcing
 alignment of pointer accesses.  For instance, on most systems the packet pointer
 is 2 bytes after a 4-byte alignment.  If a program adds 14 bytes to that to jump
-over the Ethernet header, then reads IHL and addes (IHL * 4), the resulting
+over the Ethernet header, then reads IHL and adds (IHL * 4), the resulting
 pointer will have a variable offset known to be 4n+2 for some n, so adding the 2
 bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through
 that pointer are safe.

Re: [PATCH 04/35] Documentation: bpf: correct spelling

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 4020 bytes --]

On Thu, Jan 26, 2023 at 10:39:34PM -0800, Randy Dunlap wrote:
> diff -- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> --- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> +++ b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> @@ -83,8 +83,8 @@ This prevents from accidentally exportin
>  to be a part of ABI what, in turn, improves both libbpf developer- and
>  user-experiences.
>  
> -ABI versionning
> ----------------
> +ABI versioning
> +--------------
>  
>  To make future ABI extensions possible libbpf ABI is versioned.
>  Versioning is implemented by ``libbpf.map`` version script that is
> @@ -148,7 +148,7 @@ API documentation convention
>  The libbpf API is documented via comments above definitions in
>  header files. These comments can be rendered by doxygen and sphinx
>  for well organized html output. This section describes the
> -convention in which these comments should be formated.
> +convention in which these comments should be formatted.
>  
>  Here is an example from btf.h:
>  
> diff -- a/Documentation/bpf/map_xskmap.rst b/Documentation/bpf/map_xskmap.rst
> --- a/Documentation/bpf/map_xskmap.rst
> +++ b/Documentation/bpf/map_xskmap.rst
> @@ -178,7 +178,7 @@ The following code snippet shows how to
>  
>  For an example on how create AF_XDP sockets, please see the AF_XDP-example and
>  AF_XDP-forwarding programs in the `bpf-examples`_ directory in the `libxdp`_ repository.
> -For a detailed explaination of the AF_XDP interface please see:
> +For a detailed explanation of the AF_XDP interface please see:
>  
>  - `libxdp-readme`_.
>  - `AF_XDP`_ kernel documentation.
> diff -- a/Documentation/bpf/ringbuf.rst b/Documentation/bpf/ringbuf.rst
> --- a/Documentation/bpf/ringbuf.rst
> +++ b/Documentation/bpf/ringbuf.rst
> @@ -124,7 +124,7 @@ buffer.  Currently 4 are supported:
>  
>  - ``BPF_RB_AVAIL_DATA`` returns amount of unconsumed data in ring buffer;
>  - ``BPF_RB_RING_SIZE`` returns the size of ring buffer;
> -- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical possition
> +- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical position
>    of consumer/producer, respectively.
>  
>  Returned values are momentarily snapshots of ring buffer state and could be
> @@ -146,7 +146,7 @@ Design and Implementation
>  This reserve/commit schema allows a natural way for multiple producers, either
>  on different CPUs or even on the same CPU/in the same BPF program, to reserve
>  independent records and work with them without blocking other producers. This
> -means that if BPF program was interruped by another BPF program sharing the
> +means that if BPF program was interrupted by another BPF program sharing the
>  same ring buffer, they will both get a record reserved (provided there is
>  enough space left) and can work with it and submit it independently. This
>  applies to NMI context as well, except that due to using a spinlock during
> diff -- a/Documentation/bpf/verifier.rst b/Documentation/bpf/verifier.rst
> --- a/Documentation/bpf/verifier.rst
> +++ b/Documentation/bpf/verifier.rst
> @@ -192,7 +192,7 @@ checked and found to be non-NULL, all co
>  As well as range-checking, the tracked information is also used for enforcing
>  alignment of pointer accesses.  For instance, on most systems the packet pointer
>  is 2 bytes after a 4-byte alignment.  If a program adds 14 bytes to that to jump
> -over the Ethernet header, then reads IHL and addes (IHL * 4), the resulting
> +over the Ethernet header, then reads IHL and adds (IHL * 4), the resulting
>  pointer will have a variable offset known to be 4n+2 for some n, so adding the 2
>  bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through
>  that pointer are safe.

LGTM, thanks!

Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 04/35] Documentation: bpf: correct spelling

[Alexei Starovoitov]

On Thu, Jan 26, 2023 at 10:40 PM Randy Dunlap <rdunlap@infradead.org> wrote:
>
> Correct spelling problems for Documentation/bpf/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Andrii Nakryiko <andrii@kernel.org>
> Cc: Alexei Starovoitov <ast@kernel.org>
> Cc: Daniel Borkmann <daniel@iogearbox.net>
> Cc: bpf@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>  Documentation/bpf/libbpf/libbpf_naming_convention.rst |    6 +++---
>  Documentation/bpf/map_xskmap.rst                      |    2 +-
>  Documentation/bpf/ringbuf.rst                         |    4 ++--
>  Documentation/bpf/verifier.rst                        |    2 +-
>  4 files changed, 7 insertions(+), 7 deletions(-)
>
> diff -- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> --- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> +++ b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> @@ -83,8 +83,8 @@ This prevents from accidentally exportin
>  to be a part of ABI what, in turn, improves both libbpf developer- and
>  user-experiences.
>
> -ABI versionning
> ----------------
> +ABI versioning
> +--------------

The patch looks fine, but please submit it independently
targeting bpf-next with [PATCH bpf-next] subj.
We want to avoid conflicts.

Re: [PATCH 04/35] Documentation: bpf: correct spelling

[David Vernet]

On Thu, Jan 26, 2023 at 10:39:34PM -0800, Randy Dunlap wrote:
> Correct spelling problems for Documentation/bpf/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Andrii Nakryiko <andrii@kernel.org>
> Cc: Alexei Starovoitov <ast@kernel.org>
> Cc: Daniel Borkmann <daniel@iogearbox.net>
> Cc: bpf@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>  Documentation/bpf/libbpf/libbpf_naming_convention.rst |    6 +++---
>  Documentation/bpf/map_xskmap.rst                      |    2 +-
>  Documentation/bpf/ringbuf.rst                         |    4 ++--
>  Documentation/bpf/verifier.rst                        |    2 +-
>  4 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff -- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> --- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> +++ b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> @@ -83,8 +83,8 @@ This prevents from accidentally exportin
>  to be a part of ABI what, in turn, improves both libbpf developer- and
>  user-experiences.
>  
> -ABI versionning
> ----------------
> +ABI versioning
> +--------------
>  
>  To make future ABI extensions possible libbpf ABI is versioned.
>  Versioning is implemented by ``libbpf.map`` version script that is
> @@ -148,7 +148,7 @@ API documentation convention
>  The libbpf API is documented via comments above definitions in
>  header files. These comments can be rendered by doxygen and sphinx
>  for well organized html output. This section describes the
> -convention in which these comments should be formated.
> +convention in which these comments should be formatted.
>  
>  Here is an example from btf.h:
>  
> diff -- a/Documentation/bpf/map_xskmap.rst b/Documentation/bpf/map_xskmap.rst
> --- a/Documentation/bpf/map_xskmap.rst
> +++ b/Documentation/bpf/map_xskmap.rst
> @@ -178,7 +178,7 @@ The following code snippet shows how to
>  
>  For an example on how create AF_XDP sockets, please see the AF_XDP-example and
>  AF_XDP-forwarding programs in the `bpf-examples`_ directory in the `libxdp`_ repository.
> -For a detailed explaination of the AF_XDP interface please see:
> +For a detailed explanation of the AF_XDP interface please see:
>  
>  - `libxdp-readme`_.
>  - `AF_XDP`_ kernel documentation.
> diff -- a/Documentation/bpf/ringbuf.rst b/Documentation/bpf/ringbuf.rst
> --- a/Documentation/bpf/ringbuf.rst
> +++ b/Documentation/bpf/ringbuf.rst
> @@ -124,7 +124,7 @@ buffer.  Currently 4 are supported:
>  
>  - ``BPF_RB_AVAIL_DATA`` returns amount of unconsumed data in ring buffer;
>  - ``BPF_RB_RING_SIZE`` returns the size of ring buffer;
> -- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical possition
> +- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical position
>    of consumer/producer, respectively.
>  
>  Returned values are momentarily snapshots of ring buffer state and could be
> @@ -146,7 +146,7 @@ Design and Implementation
>  This reserve/commit schema allows a natural way for multiple producers, either
>  on different CPUs or even on the same CPU/in the same BPF program, to reserve
>  independent records and work with them without blocking other producers. This
> -means that if BPF program was interruped by another BPF program sharing the
> +means that if BPF program was interrupted by another BPF program sharing the

While you're here, could you please also fix this:

s/if BPF program/if a BPF program

>  same ring buffer, they will both get a record reserved (provided there is
>  enough space left) and can work with it and submit it independently. This
>  applies to NMI context as well, except that due to using a spinlock during
> diff -- a/Documentation/bpf/verifier.rst b/Documentation/bpf/verifier.rst
> --- a/Documentation/bpf/verifier.rst
> +++ b/Documentation/bpf/verifier.rst
> @@ -192,7 +192,7 @@ checked and found to be non-NULL, all co
>  As well as range-checking, the tracked information is also used for enforcing
>  alignment of pointer accesses.  For instance, on most systems the packet pointer
>  is 2 bytes after a 4-byte alignment.  If a program adds 14 bytes to that to jump
> -over the Ethernet header, then reads IHL and addes (IHL * 4), the resulting
> +over the Ethernet header, then reads IHL and adds (IHL * 4), the resulting
>  pointer will have a variable offset known to be 4n+2 for some n, so adding the 2
>  bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through
>  that pointer are safe.

Otherwise, LGTM. I'll wait to add stamp until the v2 sent to bpf-next
instead of bpf.

Re: [PATCH 04/35] Documentation: bpf: correct spelling

[David Vernet]

On Mon, Jan 30, 2023 at 08:24:36AM -0600, David Vernet wrote:
> On Thu, Jan 26, 2023 at 10:39:34PM -0800, Randy Dunlap wrote:
> > Correct spelling problems for Documentation/bpf/ as reported
> > by codespell.
> > 
> > Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> > Cc: Andrii Nakryiko <andrii@kernel.org>
> > Cc: Alexei Starovoitov <ast@kernel.org>
> > Cc: Daniel Borkmann <daniel@iogearbox.net>
> > Cc: bpf@vger.kernel.org
> > Cc: Jonathan Corbet <corbet@lwn.net>
> > Cc: linux-doc@vger.kernel.org
> > ---
> >  Documentation/bpf/libbpf/libbpf_naming_convention.rst |    6 +++---
> >  Documentation/bpf/map_xskmap.rst                      |    2 +-
> >  Documentation/bpf/ringbuf.rst                         |    4 ++--
> >  Documentation/bpf/verifier.rst                        |    2 +-
> >  4 files changed, 7 insertions(+), 7 deletions(-)
> > 
> > diff -- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> > --- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst
> > +++ b/Documentation/bpf/libbpf/libbpf_naming_convention.rst

[...]

Ah, please disregard, I missed that Alexei had already merged this.
Thanks for the cleanup.

[PATCH 05/35] Documentation: core-api: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/core-api/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: netdev@vger.kernel.org
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: linux-crypto@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/core-api/packing.rst |    2 +-
 Documentation/core-api/padata.rst  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/core-api/packing.rst b/Documentation/core-api/packing.rst
--- a/Documentation/core-api/packing.rst
+++ b/Documentation/core-api/packing.rst
@@ -161,6 +161,6 @@ xxx_packing() that calls it using the pr
 
 The packing() function returns an int-encoded error code, which protects the
 programmer against incorrect API use.  The errors are not expected to occur
-durring runtime, therefore it is reasonable for xxx_packing() to return void
+during runtime, therefore it is reasonable for xxx_packing() to return void
 and simply swallow those errors. Optionally it can dump stack or print the
 error description.
diff -- a/Documentation/core-api/padata.rst b/Documentation/core-api/padata.rst
--- a/Documentation/core-api/padata.rst
+++ b/Documentation/core-api/padata.rst
@@ -42,7 +42,7 @@ padata_shells associated with it, each a
 Modifying cpumasks
 ------------------
 
-The CPUs used to run jobs can be changed in two ways, programatically with
+The CPUs used to run jobs can be changed in two ways, programmatically with
 padata_set_cpumask() or via sysfs.  The former is defined::
 
     int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type,

Re: [PATCH 05/35] Documentation: core-api: correct spelling

[Mukesh Ojha]

>Correct spelling problems for Documentation/core-api/ as reported
>by codespell.

>Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>Cc: Vladimir Oltean <olteanv@gmail.com>
>Cc: netdev@vger.kernel.org
>Cc: Steffen Klassert <steffen.klassert@secunet.com>
>Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
>Cc: linux-crypto@vger.kernel.org
>Cc: Jonathan Corbet <corbet@lwn.net>
>Cc: linux-doc@vger.kernel.org

Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh

[PATCH 06/35] Documentation: fault-injection: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/fault-injection/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/fault-injection/fault-injection.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/fault-injection/fault-injection.rst b/Documentation/fault-injection/fault-injection.rst
--- a/Documentation/fault-injection/fault-injection.rst
+++ b/Documentation/fault-injection/fault-injection.rst
@@ -235,7 +235,7 @@ proc entries
 Error Injectable Functions
 --------------------------
 
-This part is for the kenrel developers considering to add a function to
+This part is for the kernel developers considering to add a function to
 ALLOW_ERROR_INJECTION() macro.
 
 Requirements for the Error Injectable Functions

[PATCH 07/35] Documentation: fb: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/fb/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/fb/sm712fb.rst |    2 +-
 Documentation/fb/sstfb.rst   |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/fb/sm712fb.rst b/Documentation/fb/sm712fb.rst
--- a/Documentation/fb/sm712fb.rst
+++ b/Documentation/fb/sm712fb.rst
@@ -31,5 +31,5 @@ Missing Features
 ================
 (alias TODO list)
 
-	* 2D acceleratrion
+	* 2D acceleration
 	* dual-head support
diff -- a/Documentation/fb/sstfb.rst b/Documentation/fb/sstfb.rst
--- a/Documentation/fb/sstfb.rst
+++ b/Documentation/fb/sstfb.rst
@@ -73,7 +73,7 @@ Module insertion
 	  the device will be /dev/fb0. You can check this by doing a
 	  cat /proc/fb. You can find a copy of con2fb in tools/ directory.
 	  if you don't have another fb device, this step is superfluous,
-	  as the console subsystem automagicaly binds ttys to the fb.
+	  as the console subsystem automagically binds ttys to the fb.
        #. switch to the virtual console you just mapped. "tadaaa" ...
 
 Module removal

[PATCH 07/35] Documentation: fb: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/fb/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/fb/sm712fb.rst |    2 +-
 Documentation/fb/sstfb.rst   |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/fb/sm712fb.rst b/Documentation/fb/sm712fb.rst
--- a/Documentation/fb/sm712fb.rst
+++ b/Documentation/fb/sm712fb.rst
@@ -31,5 +31,5 @@ Missing Features
 ================
 (alias TODO list)
 
-	* 2D acceleratrion
+	* 2D acceleration
 	* dual-head support
diff -- a/Documentation/fb/sstfb.rst b/Documentation/fb/sstfb.rst
--- a/Documentation/fb/sstfb.rst
+++ b/Documentation/fb/sstfb.rst
@@ -73,7 +73,7 @@ Module insertion
 	  the device will be /dev/fb0. You can check this by doing a
 	  cat /proc/fb. You can find a copy of con2fb in tools/ directory.
 	  if you don't have another fb device, this step is superfluous,
-	  as the console subsystem automagicaly binds ttys to the fb.
+	  as the console subsystem automagically binds ttys to the fb.
        #. switch to the virtual console you just mapped. "tadaaa" ...
 
 Module removal

[PATCH 08/35] Documentation: features: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/features/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/features/core/thread-info-in-task/arch-support.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/features/core/thread-info-in-task/arch-support.txt b/Documentation/features/core/thread-info-in-task/arch-support.txt
--- a/Documentation/features/core/thread-info-in-task/arch-support.txt
+++ b/Documentation/features/core/thread-info-in-task/arch-support.txt
@@ -1,7 +1,7 @@
 #
 # Feature name:          thread-info-in-task
 #         Kconfig:       THREAD_INFO_IN_TASK
-#         description:   arch makes use of the core kernel facility to embedd thread_info in task_struct
+#         description:   arch makes use of the core kernel facility to embed thread_info in task_struct
 #
     -----------------------
     |         arch |status|

[PATCH 09/35] Documentation: firmware-guide/acpi: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/firmware-guide/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: linux-acpi@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/firmware-guide/acpi/acpi-lid.rst  |    2 +-
 Documentation/firmware-guide/acpi/namespace.rst |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/firmware-guide/acpi/acpi-lid.rst b/Documentation/firmware-guide/acpi/acpi-lid.rst
--- a/Documentation/firmware-guide/acpi/acpi-lid.rst
+++ b/Documentation/firmware-guide/acpi/acpi-lid.rst
@@ -34,7 +34,7 @@ state upon the last _LID evaluation. The
 _LID control method is evaluated during the runtime, the problem is its
 initial returning value. When the AML tables implement this control method
 with cached value, the initial returning value is likely not reliable.
-There are platforms always retun "closed" as initial lid state.
+There are platforms always return "closed" as initial lid state.
 
 Restrictions of the lid state change notifications
 ==================================================
diff -- a/Documentation/firmware-guide/acpi/namespace.rst b/Documentation/firmware-guide/acpi/namespace.rst
--- a/Documentation/firmware-guide/acpi/namespace.rst
+++ b/Documentation/firmware-guide/acpi/namespace.rst
@@ -31,7 +31,7 @@ Description Table).  The XSDT always poi
 Description Table) using its first entry, the data within the FADT
 includes various fixed-length entries that describe fixed ACPI features
 of the hardware.  The FADT contains a pointer to the DSDT
-(Differentiated System Descripition Table).  The XSDT also contains
+(Differentiated System Description Table).  The XSDT also contains
 entries pointing to possibly multiple SSDTs (Secondary System
 Description Table).
 

Re: [PATCH 09/35] Documentation: firmware-guide/acpi: correct spelling

[Rafael J. Wysocki]

On Fri, Jan 27, 2023 at 7:40 AM Randy Dunlap <rdunlap@infradead.org> wrote:
>
> Correct spelling problems for Documentation/firmware-guide/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> Cc: linux-acpi@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>  Documentation/firmware-guide/acpi/acpi-lid.rst  |    2 +-
>  Documentation/firmware-guide/acpi/namespace.rst |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff -- a/Documentation/firmware-guide/acpi/acpi-lid.rst b/Documentation/firmware-guide/acpi/acpi-lid.rst
> --- a/Documentation/firmware-guide/acpi/acpi-lid.rst
> +++ b/Documentation/firmware-guide/acpi/acpi-lid.rst
> @@ -34,7 +34,7 @@ state upon the last _LID evaluation. The
>  _LID control method is evaluated during the runtime, the problem is its
>  initial returning value. When the AML tables implement this control method
>  with cached value, the initial returning value is likely not reliable.
> -There are platforms always retun "closed" as initial lid state.
> +There are platforms always return "closed" as initial lid state.
>
>  Restrictions of the lid state change notifications
>  ==================================================
> diff -- a/Documentation/firmware-guide/acpi/namespace.rst b/Documentation/firmware-guide/acpi/namespace.rst
> --- a/Documentation/firmware-guide/acpi/namespace.rst
> +++ b/Documentation/firmware-guide/acpi/namespace.rst
> @@ -31,7 +31,7 @@ Description Table).  The XSDT always poi
>  Description Table) using its first entry, the data within the FADT
>  includes various fixed-length entries that describe fixed ACPI features
>  of the hardware.  The FADT contains a pointer to the DSDT
> -(Differentiated System Descripition Table).  The XSDT also contains
> +(Differentiated System Description Table).  The XSDT also contains
>  entries pointing to possibly multiple SSDTs (Secondary System
>  Description Table).

Applied as 6.3 material, thanks!

[PATCH 10/35] Documentation: hid: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/hid/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/hid/hid-alps.rst      |    2 +-
 Documentation/hid/hid-bpf.rst       |    2 +-
 Documentation/hid/hiddev.rst        |    2 +-
 Documentation/hid/hidraw.rst        |    2 +-
 Documentation/hid/intel-ish-hid.rst |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff -- a/Documentation/hid/hid-alps.rst b/Documentation/hid/hid-alps.rst
--- a/Documentation/hid/hid-alps.rst
+++ b/Documentation/hid/hid-alps.rst
@@ -9,7 +9,7 @@ Currently ALPS HID driver supports U1 To
 U1 device basic information.
 
 ==========	======
-Vender ID	0x044E
+Vendor ID	0x044E
 Product ID	0x120B
 Version ID	0x0121
 ==========	======
diff -- a/Documentation/hid/hid-bpf.rst b/Documentation/hid/hid-bpf.rst
--- a/Documentation/hid/hid-bpf.rst
+++ b/Documentation/hid/hid-bpf.rst
@@ -307,7 +307,7 @@ sysfs path: ``/sys/bus/hid/devices/xxxx:
 
 We can not rely on hidraw to bind a BPF program to a HID device. hidraw is an
 artefact of the processing of the HID device, and is not stable. Some drivers
-even disable it, so that removes the tracing capabilies on those devices
+even disable it, so that removes the tracing capabilities on those devices
 (where it is interesting to get the non-hidraw traces).
 
 On the other hand, the ``hid_id`` is stable for the entire life of the HID device,
diff -- a/Documentation/hid/hiddev.rst b/Documentation/hid/hiddev.rst
--- a/Documentation/hid/hiddev.rst
+++ b/Documentation/hid/hiddev.rst
@@ -8,7 +8,7 @@ Introduction
 In addition to the normal input type HID devices, USB also uses the
 human interface device protocols for things that are not really human
 interfaces, but have similar sorts of communication needs. The two big
-examples for this are power devices (especially uninterruptable power
+examples for this are power devices (especially uninterruptible power
 supplies) and monitor control on higher end monitors.
 
 To support these disparate requirements, the Linux USB system provides
diff -- a/Documentation/hid/hidraw.rst b/Documentation/hid/hidraw.rst
--- a/Documentation/hid/hidraw.rst
+++ b/Documentation/hid/hidraw.rst
@@ -163,7 +163,7 @@ HIDIOCGOUTPUT(len):
 	Get an Output Report
 
 This ioctl will request an output report from the device using the control
-endpoint.  Typically, this is used to retrive the initial state of
+endpoint.  Typically, this is used to retrieve the initial state of
 an output report of a device, before an application updates it as necessary either
 via a HIDIOCSOUTPUT request, or the regular device write() interface.  The format
 of the buffer issued with this report is identical to that of HIDIOCGFEATURE.
diff -- a/Documentation/hid/intel-ish-hid.rst b/Documentation/hid/intel-ish-hid.rst
--- a/Documentation/hid/intel-ish-hid.rst
+++ b/Documentation/hid/intel-ish-hid.rst
@@ -199,7 +199,7 @@ the sender that the memory region for th
 DMA initialization is started with host sending DMA_ALLOC_NOTIFY bus message
 (that includes RX buffer) and FW responds with DMA_ALLOC_NOTIFY_ACK.
 Additionally to DMA address communication, this sequence checks capabilities:
-if thw host doesn't support DMA, then it won't send DMA allocation, so FW can't
+if the host doesn't support DMA, then it won't send DMA allocation, so FW can't
 send DMA; if FW doesn't support DMA then it won't respond with
 DMA_ALLOC_NOTIFY_ACK, in which case host will not use DMA transfers.
 Here ISH acts as busmaster DMA controller. Hence when host sends DMA_XFER,

Re: [PATCH 10/35] Documentation: hid: correct spelling

[srinivas pandruvada]

On Thu, 2023-01-26 at 22:39 -0800, Randy Dunlap wrote:
> Correct spelling problems for Documentation/hid/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jiri Kosina <jikos@kernel.org>
> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> Cc: linux-input@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org

For Documentation/hid/intel-ish-hid.rst

Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>


> ---
>  Documentation/hid/hid-alps.rst      |    2 +-
>  Documentation/hid/hid-bpf.rst       |    2 +-
>  Documentation/hid/hiddev.rst        |    2 +-
>  Documentation/hid/hidraw.rst        |    2 +-
>  Documentation/hid/intel-ish-hid.rst |    2 +-
>  5 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff -- a/Documentation/hid/hid-alps.rst b/Documentation/hid/hid-
> alps.rst
> --- a/Documentation/hid/hid-alps.rst
> +++ b/Documentation/hid/hid-alps.rst
> @@ -9,7 +9,7 @@ Currently ALPS HID driver supports U1 To
>  U1 device basic information.
>  
>  ==========     ======
> -Vender ID      0x044E
> +Vendor ID      0x044E
>  Product ID     0x120B
>  Version ID     0x0121
>  ==========     ======
> diff -- a/Documentation/hid/hid-bpf.rst b/Documentation/hid/hid-
> bpf.rst
> --- a/Documentation/hid/hid-bpf.rst
> +++ b/Documentation/hid/hid-bpf.rst
> @@ -307,7 +307,7 @@ sysfs path: ``/sys/bus/hid/devices/xxxx:
>  
>  We can not rely on hidraw to bind a BPF program to a HID device.
> hidraw is an
>  artefact of the processing of the HID device, and is not stable.
> Some drivers
> -even disable it, so that removes the tracing capabilies on those
> devices
> +even disable it, so that removes the tracing capabilities on those
> devices
>  (where it is interesting to get the non-hidraw traces).
>  
>  On the other hand, the ``hid_id`` is stable for the entire life of
> the HID device,
> diff -- a/Documentation/hid/hiddev.rst b/Documentation/hid/hiddev.rst
> --- a/Documentation/hid/hiddev.rst
> +++ b/Documentation/hid/hiddev.rst
> @@ -8,7 +8,7 @@ Introduction
>  In addition to the normal input type HID devices, USB also uses the
>  human interface device protocols for things that are not really
> human
>  interfaces, but have similar sorts of communication needs. The two
> big
> -examples for this are power devices (especially uninterruptable
> power
> +examples for this are power devices (especially uninterruptible
> power
>  supplies) and monitor control on higher end monitors.
>  
>  To support these disparate requirements, the Linux USB system
> provides
> diff -- a/Documentation/hid/hidraw.rst b/Documentation/hid/hidraw.rst
> --- a/Documentation/hid/hidraw.rst
> +++ b/Documentation/hid/hidraw.rst
> @@ -163,7 +163,7 @@ HIDIOCGOUTPUT(len):
>         Get an Output Report
>  
>  This ioctl will request an output report from the device using the
> control
> -endpoint.  Typically, this is used to retrive the initial state of
> +endpoint.  Typically, this is used to retrieve the initial state of
>  an output report of a device, before an application updates it as
> necessary either
>  via a HIDIOCSOUTPUT request, or the regular device write()
> interface.  The format
>  of the buffer issued with this report is identical to that of
> HIDIOCGFEATURE.
> diff -- a/Documentation/hid/intel-ish-hid.rst
> b/Documentation/hid/intel-ish-hid.rst
> --- a/Documentation/hid/intel-ish-hid.rst
> +++ b/Documentation/hid/intel-ish-hid.rst
> @@ -199,7 +199,7 @@ the sender that the memory region for th
>  DMA initialization is started with host sending DMA_ALLOC_NOTIFY bus
> message
>  (that includes RX buffer) and FW responds with DMA_ALLOC_NOTIFY_ACK.
>  Additionally to DMA address communication, this sequence checks
> capabilities:
> -if thw host doesn't support DMA, then it won't send DMA allocation,
> so FW can't
> +if the host doesn't support DMA, then it won't send DMA allocation,
> so FW can't
>  send DMA; if FW doesn't support DMA then it won't respond with
>  DMA_ALLOC_NOTIFY_ACK, in which case host will not use DMA transfers.
>  Here ISH acts as busmaster DMA controller. Hence when host sends
> DMA_XFER,

Re: (subset) [PATCH 10/35] Documentation: hid: correct spelling

[Benjamin Tissoires]

On Thu, 26 Jan 2023 22:39:40 -0800, Randy Dunlap wrote:
> Correct spelling problems for Documentation/hid/ as reported
> by codespell.
> 
> 

Applied to hid/hid.git (for-6.3/hid-bpf), thanks!

[10/35] Documentation: hid: correct spelling
        https://git.kernel.org/hid/hid/c/2f7f4efb9411

Cheers,
-- 
Benjamin Tissoires <benjamin.tissoires@redhat.com>

[PATCH 11/35] Documentation: i2c: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/i2c/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Wolfram Sang <wsa@kernel.org>
Cc: linux-i2c@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/i2c/gpio-fault-injection.rst |    2 +-
 Documentation/i2c/smbus-protocol.rst       |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/i2c/gpio-fault-injection.rst b/Documentation/i2c/gpio-fault-injection.rst
--- a/Documentation/i2c/gpio-fault-injection.rst
+++ b/Documentation/i2c/gpio-fault-injection.rst
@@ -93,7 +93,7 @@ bus arbitration against another master i
 ------------------
 
 This file is write only and you need to write the duration of the arbitration
-intereference (in µs, maximum is 100ms). The calling process will then sleep
+interference (in µs, maximum is 100ms). The calling process will then sleep
 and wait for the next bus clock. The process is interruptible, though.
 
 Arbitration lost is achieved by waiting for SCL going down by the master under
diff -- a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -238,7 +238,7 @@ This is implemented in the following way
 * I2C bus drivers trigger SMBus Host Notify by a call to
   i2c_handle_smbus_host_notify().
 * I2C drivers for devices which can trigger SMBus Host Notify will have
-  client->irq assigned to a Host Notify IRQ if noone else specified an other.
+  client->irq assigned to a Host Notify IRQ if no one else specified an other.
 
 There is currently no way to retrieve the data parameter from the client.
 

Re: [PATCH 11/35] Documentation: i2c: correct spelling

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 235 bytes --]


> -  client->irq assigned to a Host Notify IRQ if noone else specified an other.
> +  client->irq assigned to a Host Notify IRQ if no one else specified an other.

I am not a native speaker, but shouldn't the last word be "another"?


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 11/35] Documentation: i2c: correct spelling

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 468 bytes --]

On Fri, Jan 27, 2023 at 08:14:46AM +0100, Wolfram Sang wrote:
> 
> > -  client->irq assigned to a Host Notify IRQ if noone else specified an other.
> > +  client->irq assigned to a Host Notify IRQ if no one else specified an other.
> 
> I am not a native speaker, but shouldn't the last word be "another"?
> 

Yes, the sentence should have been "... if no one else specified
another."

Thanks.

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 11/35] Documentation: i2c: correct spelling

[Randy Dunlap]

On 1/26/23 23:14, Wolfram Sang wrote:
> 
>> -  client->irq assigned to a Host Notify IRQ if noone else specified an other.
>> +  client->irq assigned to a Host Notify IRQ if no one else specified an other.
> 
> I am not a native speaker, but shouldn't the last word be "another"?
> 

Yes, I'll correct that. Thanks.

-- 
~Randy

[PATCH 12/35] Documentation: input: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/input/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/input/devices/iforce-protocol.rst |    2 +-
 Documentation/input/multi-touch-protocol.rst    |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/input/devices/iforce-protocol.rst b/Documentation/input/devices/iforce-protocol.rst
--- a/Documentation/input/devices/iforce-protocol.rst
+++ b/Documentation/input/devices/iforce-protocol.rst
@@ -49,7 +49,7 @@ OP DATA
 == ====
 
 The 2B, LEN and CS fields have disappeared, probably because USB handles
-frames and data corruption is handled or unsignificant.
+frames and data corruption is handled or insignificant.
 
 First, I describe effects that are sent by the device to the computer
 
diff -- a/Documentation/input/multi-touch-protocol.rst b/Documentation/input/multi-touch-protocol.rst
--- a/Documentation/input/multi-touch-protocol.rst
+++ b/Documentation/input/multi-touch-protocol.rst
@@ -383,7 +383,7 @@ Finger Tracking
 ---------------
 
 The process of finger tracking, i.e., to assign a unique trackingID to each
-initiated contact on the surface, is a Euclidian Bipartite Matching
+initiated contact on the surface, is a Euclidean Bipartite Matching
 problem.  At each event synchronization, the set of actual contacts is
 matched to the set of contacts from the previous synchronization. A full
 implementation can be found in [#f3]_.

[PATCH 13/35] Documentation: isdn: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/isdn/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: isdn4linux@listserv.isdn4linux.de
Cc: netdev@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/isdn/interface_capi.rst |    2 +-
 Documentation/isdn/m_isdn.rst         |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/isdn/interface_capi.rst b/Documentation/isdn/interface_capi.rst
--- a/Documentation/isdn/interface_capi.rst
+++ b/Documentation/isdn/interface_capi.rst
@@ -323,7 +323,7 @@ If the lowest bit of showcapimsgs is set
 application up and down events.
 
 In addition, every registered CAPI controller has an associated traceflag
-parameter controlling how CAPI messages sent from and to tha controller are
+parameter controlling how CAPI messages sent from and to the controller are
 logged. The traceflag parameter is initialized with the value of the
 showcapimsgs parameter when the controller is registered, but can later be
 changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE.
diff -- a/Documentation/isdn/m_isdn.rst b/Documentation/isdn/m_isdn.rst
--- a/Documentation/isdn/m_isdn.rst
+++ b/Documentation/isdn/m_isdn.rst
@@ -3,7 +3,7 @@ mISDN Driver
 ============
 
 mISDN is a new modular ISDN driver, in the long term it should replace
-the old I4L driver architecture for passiv ISDN cards.
+the old I4L driver architecture for passive ISDN cards.
 It was designed to allow a broad range of applications and interfaces
 but only have the basic function in kernel, the interface to the user
 space is based on sockets with a own address family AF_ISDN.

Re: [PATCH 13/35] Documentation: isdn: correct spelling

[Jakub Kicinski]

On Thu, 26 Jan 2023 22:39:43 -0800 Randy Dunlap wrote:
> Correct spelling problems for Documentation/isdn/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Karsten Keil <isdn@linux-pingi.de>
> Cc: isdn4linux@listserv.isdn4linux.de
> Cc: netdev@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org

Acked-by: Jakub Kicinski <kuba@kernel.org>

[PATCH 14/35] Documentation: leds: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/leds/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Lee Jones <lee@kernel.org>
Cc: linux-leds@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/leds/leds-qcom-lpg.rst |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/leds/leds-qcom-lpg.rst b/Documentation/leds/leds-qcom-lpg.rst
--- a/Documentation/leds/leds-qcom-lpg.rst
+++ b/Documentation/leds/leds-qcom-lpg.rst
@@ -34,7 +34,7 @@ Specify a hardware pattern for a Qualcom
 
 The pattern is a series of brightness and hold-time pairs, with the hold-time
 expressed in milliseconds. The hold time is a property of the pattern and must
-therefor be identical for each element in the pattern (except for the pauses
+therefore be identical for each element in the pattern (except for the pauses
 described below). As the LPG hardware is not able to perform the linear
 transitions expected by the leds-trigger-pattern format, each entry in the
 pattern must be followed a zero-length entry of the same brightness.
@@ -66,7 +66,7 @@ Low-pause pattern::
         +----------------------------->
         0    5   10   15  20   25   time (100ms)
 
-Similarily, the last entry can be stretched by using a higher hold-time on the
+Similarly, the last entry can be stretched by using a higher hold-time on the
 last entry.
 
 In order to save space in the shared lookup table the LPG supports "ping-pong"

Re: [PATCH 14/35] Documentation: leds: correct spelling

[Lee Jones]

On Thu, 26 Jan 2023, Randy Dunlap wrote:

> Correct spelling problems for Documentation/leds/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Lee Jones <lee@kernel.org>
> Cc: linux-leds@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>  Documentation/leds/leds-qcom-lpg.rst |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Applied, thanks

-- 
Lee Jones [李琼斯]

[PATCH 15/35] Documentation: litmus-tests: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/litmus-tests/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: linux-arch@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/litmus-tests/README |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/litmus-tests/README b/Documentation/litmus-tests/README
--- a/Documentation/litmus-tests/README
+++ b/Documentation/litmus-tests/README
@@ -9,7 +9,7 @@ a kernel test module based on a litmus t
 tools/memory-model/README.
 
 
-atomic (/atomic derectory)
+atomic (/atomic directory)
 --------------------------
 
 Atomic-RMW+mb__after_atomic-is-stronger-than-acquire.litmus

[PATCH 16/35] Documentation: livepatch: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/livepatch/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: live-patching@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/livepatch/reliable-stacktrace.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/livepatch/reliable-stacktrace.rst b/Documentation/livepatch/reliable-stacktrace.rst
--- a/Documentation/livepatch/reliable-stacktrace.rst
+++ b/Documentation/livepatch/reliable-stacktrace.rst
@@ -40,7 +40,7 @@ Principally, the reliable stacktrace fun
 .. note::
    In some cases it is legitimate to omit specific functions from the trace,
    but all other functions must be reported. These cases are described in
-   futher detail below.
+   further detail below.
 
 Secondly, the reliable stacktrace function must be robust to cases where
 the stack or other unwind state is corrupt or otherwise unreliable. The

Re: [PATCH 16/35] Documentation: livepatch: correct spelling

[Petr Mladek]

On Thu 2023-01-26 22:39:46, Randy Dunlap wrote:
> Correct spelling problems for Documentation/livepatch/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>

Reviewed-by: Petr Mladek <pmladek@suse.com>

Best Regards,
Petr

[PATCH 17/35] Documentation: locking: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/locking/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/locking/lockdep-design.rst  |    4 ++--
 Documentation/locking/locktorture.rst     |    2 +-
 Documentation/locking/locktypes.rst       |    2 +-
 Documentation/locking/preempt-locking.rst |    2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff -- a/Documentation/locking/lockdep-design.rst b/Documentation/locking/lockdep-design.rst
--- a/Documentation/locking/lockdep-design.rst
+++ b/Documentation/locking/lockdep-design.rst
@@ -29,7 +29,7 @@ the validator will shoot a splat if inco
 A lock-class's behavior is constructed by its instances collectively:
 when the first instance of a lock-class is used after bootup the class
 gets registered, then all (subsequent) instances will be mapped to the
-class and hence their usages and dependecies will contribute to those of
+class and hence their usages and dependencies will contribute to those of
 the class. A lock-class does not go away when a lock instance does, but
 it can be removed if the memory space of the lock class (static or
 dynamic) is reclaimed, this happens for example when a module is
@@ -105,7 +105,7 @@ exact case is for the lock as of the rep
   +--------------+-------------+--------------+
 
 The character '-' suggests irq is disabled because if otherwise the
-charactor '?' would have been shown instead. Similar deduction can be
+character '?' would have been shown instead. Similar deduction can be
 applied for '+' too.
 
 Unused locks (e.g., mutexes) cannot be part of the cause of an error.
diff -- a/Documentation/locking/locktorture.rst b/Documentation/locking/locktorture.rst
--- a/Documentation/locking/locktorture.rst
+++ b/Documentation/locking/locktorture.rst
@@ -113,7 +113,7 @@ stutter
 		  without pausing.
 
 shuffle_interval
-		  The number of seconds to keep the test threads affinitied
+		  The number of seconds to keep the test threads affined
 		  to a particular subset of the CPUs, defaults to 3 seconds.
 		  Used in conjunction with test_no_idle_hz.
 
diff -- a/Documentation/locking/locktypes.rst b/Documentation/locking/locktypes.rst
--- a/Documentation/locking/locktypes.rst
+++ b/Documentation/locking/locktypes.rst
@@ -500,7 +500,7 @@ caveats also apply to bit spinlocks.
 Some bit spinlocks are replaced with regular spinlock_t for PREEMPT_RT
 using conditional (#ifdef'ed) code changes at the usage site.  In contrast,
 usage-site changes are not needed for the spinlock_t substitution.
-Instead, conditionals in header files and the core locking implemementation
+Instead, conditionals in header files and the core locking implementation
 enable the compiler to do the substitution transparently.
 
 
diff -- a/Documentation/locking/preempt-locking.rst b/Documentation/locking/preempt-locking.rst
--- a/Documentation/locking/preempt-locking.rst
+++ b/Documentation/locking/preempt-locking.rst
@@ -114,7 +114,7 @@ critical variables.  Another example::
 
 	int buf[NR_CPUS];
 	set_cpu_val(buf);
-	if (buf[smp_processor_id()] == -1) printf(KERN_INFO "wee!\n");
+	if (buf[smp_processor_id()] == -1) printf(KERN_INFO "whee!\n");
 	spin_lock(&buf_lock);
 	/* ... */
 

[PATCH 18/35] Documentation: mm: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/mm/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: linux-mm@kvack.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/mm/hmm.rst      |    4 ++--
 Documentation/mm/hwpoison.rst |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff -- a/Documentation/mm/hmm.rst b/Documentation/mm/hmm.rst
--- a/Documentation/mm/hmm.rst
+++ b/Documentation/mm/hmm.rst
@@ -416,10 +416,10 @@ can be used to make a memory range inacc
 
 This replaces all mappings for pages in the given range with special swap
 entries. Any attempt to access the swap entry results in a fault which is
-resovled by replacing the entry with the original mapping. A driver gets
+resolved by replacing the entry with the original mapping. A driver gets
 notified that the mapping has been changed by MMU notifiers, after which point
 it will no longer have exclusive access to the page. Exclusive access is
-guranteed to last until the driver drops the page lock and page reference, at
+guaranteed to last until the driver drops the page lock and page reference, at
 which point any CPU faults on the page may proceed as described.
 
 Memory cgroup (memcg) and rss accounting
diff -- a/Documentation/mm/hwpoison.rst b/Documentation/mm/hwpoison.rst
--- a/Documentation/mm/hwpoison.rst
+++ b/Documentation/mm/hwpoison.rst
@@ -50,7 +50,7 @@ of applications. KVM support requires a
 For the KVM use there was need for a new signal type so that
 KVM can inject the machine check into the guest with the proper
 address. This in theory allows other applications to handle
-memory failures too. The expection is that near all applications
+memory failures too. The expectation is that near all applications
 won't do that, but some very specialized ones might.
 
 Failure recovery modes

Re: [PATCH 18/35] Documentation: mm: correct spelling

[HORIGUCHI NAOYA(堀口 直也)]

On Thu, Jan 26, 2023 at 10:39:48PM -0800, Randy Dunlap wrote:
> Correct spelling problems for Documentation/mm/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jérôme Glisse <jglisse@redhat.com>
> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
> Cc: Miaohe Lin <linmiaohe@huawei.com>
> Cc: linux-mm@kvack.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org

Looks good to me, thank you.

Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>

Re: [PATCH 18/35] Documentation: mm: correct spelling

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 1793 bytes --]

On Thu, Jan 26, 2023 at 10:39:48PM -0800, Randy Dunlap wrote:
> diff -- a/Documentation/mm/hmm.rst b/Documentation/mm/hmm.rst
> --- a/Documentation/mm/hmm.rst
> +++ b/Documentation/mm/hmm.rst
> @@ -416,10 +416,10 @@ can be used to make a memory range inacc
>  
>  This replaces all mappings for pages in the given range with special swap
>  entries. Any attempt to access the swap entry results in a fault which is
> -resovled by replacing the entry with the original mapping. A driver gets
> +resolved by replacing the entry with the original mapping. A driver gets
>  notified that the mapping has been changed by MMU notifiers, after which point
>  it will no longer have exclusive access to the page. Exclusive access is
> -guranteed to last until the driver drops the page lock and page reference, at
> +guaranteed to last until the driver drops the page lock and page reference, at
>  which point any CPU faults on the page may proceed as described.
>  
>  Memory cgroup (memcg) and rss accounting
> diff -- a/Documentation/mm/hwpoison.rst b/Documentation/mm/hwpoison.rst
> --- a/Documentation/mm/hwpoison.rst
> +++ b/Documentation/mm/hwpoison.rst
> @@ -50,7 +50,7 @@ of applications. KVM support requires a
>  For the KVM use there was need for a new signal type so that
>  KVM can inject the machine check into the guest with the proper
>  address. This in theory allows other applications to handle
> -memory failures too. The expection is that near all applications
> +memory failures too. The expectation is that near all applications
>  won't do that, but some very specialized ones might.
>  
>  Failure recovery modes

LGTM, thanks!

Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 18/35] Documentation: mm: correct spelling

[Mike Rapoport]

On Thu, Jan 26, 2023 at 10:39:48PM -0800, Randy Dunlap wrote:
> Correct spelling problems for Documentation/mm/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jérôme Glisse <jglisse@redhat.com>
> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
> Cc: Miaohe Lin <linmiaohe@huawei.com>
> Cc: linux-mm@kvack.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>  Documentation/mm/hmm.rst      |    4 ++--
>  Documentation/mm/hwpoison.rst |    2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)

Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>

> 
> diff -- a/Documentation/mm/hmm.rst b/Documentation/mm/hmm.rst
> --- a/Documentation/mm/hmm.rst
> +++ b/Documentation/mm/hmm.rst
> @@ -416,10 +416,10 @@ can be used to make a memory range inacc
>  
>  This replaces all mappings for pages in the given range with special swap
>  entries. Any attempt to access the swap entry results in a fault which is
> -resovled by replacing the entry with the original mapping. A driver gets
> +resolved by replacing the entry with the original mapping. A driver gets
>  notified that the mapping has been changed by MMU notifiers, after which point
>  it will no longer have exclusive access to the page. Exclusive access is
> -guranteed to last until the driver drops the page lock and page reference, at
> +guaranteed to last until the driver drops the page lock and page reference, at
>  which point any CPU faults on the page may proceed as described.
>  
>  Memory cgroup (memcg) and rss accounting
> diff -- a/Documentation/mm/hwpoison.rst b/Documentation/mm/hwpoison.rst
> --- a/Documentation/mm/hwpoison.rst
> +++ b/Documentation/mm/hwpoison.rst
> @@ -50,7 +50,7 @@ of applications. KVM support requires a
>  For the KVM use there was need for a new signal type so that
>  KVM can inject the machine check into the guest with the proper
>  address. This in theory allows other applications to handle
> -memory failures too. The expection is that near all applications
> +memory failures too. The expectation is that near all applications
>  won't do that, but some very specialized ones might.
>  
>  Failure recovery modes

-- 
Sincerely yours,
Mike.

[PATCH 19/35] Documentation: openrisc: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/openrisc/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: openrisc@lists.librecores.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/openrisc/openrisc_port.rst |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/openrisc/openrisc_port.rst b/Documentation/openrisc/openrisc_port.rst
--- a/Documentation/openrisc/openrisc_port.rst
+++ b/Documentation/openrisc/openrisc_port.rst
@@ -106,7 +106,7 @@ History
 	a much improved version with changes all around.
 
 10-04-2004	Matjaz Breskvar (phoenix@bsemi.com)
-	alot of bugfixes all over.
+	a lot of bugfixes all over.
 	ethernet support, functional http and telnet servers.
 	running many standard linux apps.
 
@@ -114,7 +114,7 @@ History
 	port to 2.6.x
 
 30-11-2004	Matjaz Breskvar (phoenix@bsemi.com)
-	lots of bugfixes and enhancments.
+	lots of bugfixes and enhancements.
 	added opencores framebuffer driver.
 
 09-10-2010    Jonas Bonn (jonas@southpole.se)

[PATCH 19/35] Documentation: openrisc: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/openrisc/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: openrisc@lists.librecores.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/openrisc/openrisc_port.rst |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/openrisc/openrisc_port.rst b/Documentation/openrisc/openrisc_port.rst
--- a/Documentation/openrisc/openrisc_port.rst
+++ b/Documentation/openrisc/openrisc_port.rst
@@ -106,7 +106,7 @@ History
 	a much improved version with changes all around.
 
 10-04-2004	Matjaz Breskvar (phoenix@bsemi.com)
-	alot of bugfixes all over.
+	a lot of bugfixes all over.
 	ethernet support, functional http and telnet servers.
 	running many standard linux apps.
 
@@ -114,7 +114,7 @@ History
 	port to 2.6.x
 
 30-11-2004	Matjaz Breskvar (phoenix@bsemi.com)
-	lots of bugfixes and enhancments.
+	lots of bugfixes and enhancements.
 	added opencores framebuffer driver.
 
 09-10-2010    Jonas Bonn (jonas@southpole.se)

[PATCH 20/35] Documentation: PCI: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/PCI/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: linux-pci@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/PCI/endpoint/pci-vntb-howto.rst |    2 +-
 Documentation/PCI/msi-howto.rst               |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff -- a/Documentation/PCI/endpoint/pci-vntb-howto.rst b/Documentation/PCI/endpoint/pci-vntb-howto.rst
--- a/Documentation/PCI/endpoint/pci-vntb-howto.rst
+++ b/Documentation/PCI/endpoint/pci-vntb-howto.rst
@@ -103,7 +103,7 @@ A sample configuration for NTB function
 	# echo 1 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/num_mws
 	# echo 0x100000 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/mw1
 
-A sample configuration for virtual NTB driver for virutal PCI bus::
+A sample configuration for virtual NTB driver for virtual PCI bus::
 
 	# echo 0x1957 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_vid
 	# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
diff -- a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst
--- a/Documentation/PCI/msi-howto.rst
+++ b/Documentation/PCI/msi-howto.rst
@@ -290,7 +290,7 @@ PCI_IRQ_MSI or PCI_IRQ_MSIX flags.
 List of device drivers MSI(-X) APIs
 ===================================
 
-The PCI/MSI subystem has a dedicated C file for its exported device driver
+The PCI/MSI subsystem has a dedicated C file for its exported device driver
 APIs — `drivers/pci/msi/api.c`. The following functions are exported:
 
 .. kernel-doc:: drivers/pci/msi/api.c

Re: [PATCH 20/35] Documentation: PCI: correct spelling

[Bjorn Helgaas]

On Thu, Jan 26, 2023 at 10:39:50PM -0800, Randy Dunlap wrote:
> Correct spelling problems for Documentation/PCI/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Bjorn Helgaas <bhelgaas@google.com>

Looks good, thanks!  I assume these will be merged all together, but
let me know if you'd like me to pick this up.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
> Cc: linux-pci@vger.kernel.org
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>  Documentation/PCI/endpoint/pci-vntb-howto.rst |    2 +-
>  Documentation/PCI/msi-howto.rst               |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff -- a/Documentation/PCI/endpoint/pci-vntb-howto.rst b/Documentation/PCI/endpoint/pci-vntb-howto.rst
> --- a/Documentation/PCI/endpoint/pci-vntb-howto.rst
> +++ b/Documentation/PCI/endpoint/pci-vntb-howto.rst
> @@ -103,7 +103,7 @@ A sample configuration for NTB function
>  	# echo 1 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/num_mws
>  	# echo 0x100000 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/mw1
>  
> -A sample configuration for virtual NTB driver for virutal PCI bus::
> +A sample configuration for virtual NTB driver for virtual PCI bus::
>  
>  	# echo 0x1957 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_vid
>  	# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
> diff -- a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst
> --- a/Documentation/PCI/msi-howto.rst
> +++ b/Documentation/PCI/msi-howto.rst
> @@ -290,7 +290,7 @@ PCI_IRQ_MSI or PCI_IRQ_MSIX flags.
>  List of device drivers MSI(-X) APIs
>  ===================================
>  
> -The PCI/MSI subystem has a dedicated C file for its exported device driver
> +The PCI/MSI subsystem has a dedicated C file for its exported device driver
>  APIs — `drivers/pci/msi/api.c`. The following functions are exported:
>  
>  .. kernel-doc:: drivers/pci/msi/api.c

[PATCH 22/35] Documentation: power: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/power/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-pm@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/power/suspend-and-interrupts.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/power/suspend-and-interrupts.rst b/Documentation/power/suspend-and-interrupts.rst
--- a/Documentation/power/suspend-and-interrupts.rst
+++ b/Documentation/power/suspend-and-interrupts.rst
@@ -67,7 +67,7 @@ That may involve turning on a special si
 during system sleep so as to trigger a system wakeup when needed.  For example,
 the platform may include a dedicated interrupt controller used specifically for
 handling system wakeup events.  Then, if a given interrupt line is supposed to
-wake up the system from sleep sates, the corresponding input of that interrupt
+wake up the system from sleep states, the corresponding input of that interrupt
 controller needs to be enabled to receive signals from the line in question.
 After wakeup, it generally is better to disable that input to prevent the
 dedicated controller from triggering interrupts unnecessarily.

[PATCH 21/35] Documentation: powerpc: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/powerpc/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/powerpc/kasan.txt       |    2 +-
 Documentation/powerpc/papr_hcalls.rst |    2 +-
 Documentation/powerpc/qe_firmware.rst |    4 ++--
 Documentation/powerpc/vas-api.rst     |    4 ++--
 4 files changed, 6 insertions(+), 6 deletions(-)

diff -- a/Documentation/powerpc/kasan.txt b/Documentation/powerpc/kasan.txt
--- a/Documentation/powerpc/kasan.txt
+++ b/Documentation/powerpc/kasan.txt
@@ -40,7 +40,7 @@ checks can be delayed until after the MM
 instrument any code that runs with translations off after booting. This is the
 current approach.
 
-To avoid this limitiation, the KASAN shadow would have to be placed inside the
+To avoid this limitation, the KASAN shadow would have to be placed inside the
 linear mapping, using the same high-bits trick we use for the rest of the linear
 mapping. This is tricky:
 
diff -- a/Documentation/powerpc/papr_hcalls.rst b/Documentation/powerpc/papr_hcalls.rst
--- a/Documentation/powerpc/papr_hcalls.rst
+++ b/Documentation/powerpc/papr_hcalls.rst
@@ -22,7 +22,7 @@ privileged operations. Currently there a
 On PPC64 arch a guest kernel running on top of a PAPR hypervisor is called
 a *pSeries guest*. A pseries guest runs in a supervisor mode (HV=0) and must
 issue hypercalls to the hypervisor whenever it needs to perform an action
-that is hypervisor priviledged [3]_ or for other services managed by the
+that is hypervisor privileged [3]_ or for other services managed by the
 hypervisor.
 
 Hence a Hypercall (hcall) is essentially a request by the pseries guest
diff -- a/Documentation/powerpc/qe_firmware.rst b/Documentation/powerpc/qe_firmware.rst
--- a/Documentation/powerpc/qe_firmware.rst
+++ b/Documentation/powerpc/qe_firmware.rst
@@ -232,11 +232,11 @@ For example, to match the 8323, revision
 'extended_modes' is a bitfield that defines special functionality which has an
 impact on the device drivers.  Each bit has its own impact and has special
 instructions for the driver associated with it.  This field is stored in
-the QE library and available to any driver that calles qe_get_firmware_info().
+the QE library and available to any driver that calls qe_get_firmware_info().
 
 'vtraps' is an array of 8 words that contain virtual trap values for each
 virtual traps.  As with 'extended_modes', this field is stored in the QE
-library and available to any driver that calles qe_get_firmware_info().
+library and available to any driver that calls qe_get_firmware_info().
 
 'microcode' (type: struct qe_microcode):
 	For each RISC processor there is one 'microcode' structure.  The first
diff -- a/Documentation/powerpc/vas-api.rst b/Documentation/powerpc/vas-api.rst
--- a/Documentation/powerpc/vas-api.rst
+++ b/Documentation/powerpc/vas-api.rst
@@ -46,7 +46,7 @@ request queue into the application's vir
 The application can then submit one or more requests to the engine by
 using copy/paste instructions and pasting the CRBs to the virtual address
 (aka paste_address) returned by mmap(). User space can close the
-established connection or send window by closing the file descriptior
+established connection or send window by closing the file descriptor
 (close(fd)) or upon the process exit.
 
 Note that applications can send several requests with the same window or
@@ -240,7 +240,7 @@ issued. This signal returns with the fol
 	siginfo.si_signo = SIGSEGV;
 	siginfo.si_errno = EFAULT;
 	siginfo.si_code = SEGV_MAPERR;
-	siginfo.si_addr = CSB adress;
+	siginfo.si_addr = CSB address;
 
 In the case of multi-thread applications, NX send windows can be shared
 across all threads. For example, a child thread can open a send window,

[PATCH 21/35] Documentation: powerpc: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/powerpc/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/powerpc/kasan.txt       |    2 +-
 Documentation/powerpc/papr_hcalls.rst |    2 +-
 Documentation/powerpc/qe_firmware.rst |    4 ++--
 Documentation/powerpc/vas-api.rst     |    4 ++--
 4 files changed, 6 insertions(+), 6 deletions(-)

diff -- a/Documentation/powerpc/kasan.txt b/Documentation/powerpc/kasan.txt
--- a/Documentation/powerpc/kasan.txt
+++ b/Documentation/powerpc/kasan.txt
@@ -40,7 +40,7 @@ checks can be delayed until after the MM
 instrument any code that runs with translations off after booting. This is the
 current approach.
 
-To avoid this limitiation, the KASAN shadow would have to be placed inside the
+To avoid this limitation, the KASAN shadow would have to be placed inside the
 linear mapping, using the same high-bits trick we use for the rest of the linear
 mapping. This is tricky:
 
diff -- a/Documentation/powerpc/papr_hcalls.rst b/Documentation/powerpc/papr_hcalls.rst
--- a/Documentation/powerpc/papr_hcalls.rst
+++ b/Documentation/powerpc/papr_hcalls.rst
@@ -22,7 +22,7 @@ privileged operations. Currently there a
 On PPC64 arch a guest kernel running on top of a PAPR hypervisor is called
 a *pSeries guest*. A pseries guest runs in a supervisor mode (HV=0) and must
 issue hypercalls to the hypervisor whenever it needs to perform an action
-that is hypervisor priviledged [3]_ or for other services managed by the
+that is hypervisor privileged [3]_ or for other services managed by the
 hypervisor.
 
 Hence a Hypercall (hcall) is essentially a request by the pseries guest
diff -- a/Documentation/powerpc/qe_firmware.rst b/Documentation/powerpc/qe_firmware.rst
--- a/Documentation/powerpc/qe_firmware.rst
+++ b/Documentation/powerpc/qe_firmware.rst
@@ -232,11 +232,11 @@ For example, to match the 8323, revision
 'extended_modes' is a bitfield that defines special functionality which has an
 impact on the device drivers.  Each bit has its own impact and has special
 instructions for the driver associated with it.  This field is stored in
-the QE library and available to any driver that calles qe_get_firmware_info().
+the QE library and available to any driver that calls qe_get_firmware_info().
 
 'vtraps' is an array of 8 words that contain virtual trap values for each
 virtual traps.  As with 'extended_modes', this field is stored in the QE
-library and available to any driver that calles qe_get_firmware_info().
+library and available to any driver that calls qe_get_firmware_info().
 
 'microcode' (type: struct qe_microcode):
 	For each RISC processor there is one 'microcode' structure.  The first
diff -- a/Documentation/powerpc/vas-api.rst b/Documentation/powerpc/vas-api.rst
--- a/Documentation/powerpc/vas-api.rst
+++ b/Documentation/powerpc/vas-api.rst
@@ -46,7 +46,7 @@ request queue into the application's vir
 The application can then submit one or more requests to the engine by
 using copy/paste instructions and pasting the CRBs to the virtual address
 (aka paste_address) returned by mmap(). User space can close the
-established connection or send window by closing the file descriptior
+established connection or send window by closing the file descriptor
 (close(fd)) or upon the process exit.
 
 Note that applications can send several requests with the same window or
@@ -240,7 +240,7 @@ issued. This signal returns with the fol
 	siginfo.si_signo = SIGSEGV;
 	siginfo.si_errno = EFAULT;
 	siginfo.si_code = SEGV_MAPERR;
-	siginfo.si_addr = CSB adress;
+	siginfo.si_addr = CSB address;
 
 In the case of multi-thread applications, NX send windows can be shared
 across all threads. For example, a child thread can open a send window,

[PATCH 23/35] Documentation: s390: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/s390/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/s390/pci.rst      |    4 ++--
 Documentation/s390/vfio-ccw.rst |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff -- a/Documentation/s390/pci.rst b/Documentation/s390/pci.rst
--- a/Documentation/s390/pci.rst
+++ b/Documentation/s390/pci.rst
@@ -51,7 +51,7 @@ Entries specific to zPCI functions and e
 
   The slot entries are set up using the function identifier (FID) of the
   PCI function. The format depicted as XXXXXXXX above is 8 hexadecimal digits
-  with 0 padding and lower case hexadecimal digitis.
+  with 0 padding and lower case hexadecimal digits.
 
   - /sys/bus/pci/slots/XXXXXXXX/power
 
@@ -66,7 +66,7 @@ Entries specific to zPCI functions and e
 
   - function_handle
     Low-level identifier used for a configured PCI function.
-    It might be useful for debuging.
+    It might be useful for debugging.
 
   - pchid
     Model-dependent location of the I/O adapter.
diff -- a/Documentation/s390/vfio-ccw.rst b/Documentation/s390/vfio-ccw.rst
--- a/Documentation/s390/vfio-ccw.rst
+++ b/Documentation/s390/vfio-ccw.rst
@@ -176,7 +176,7 @@ The process of how these work together.
    Use the 'mdev_create' sysfs file, we need to manually create one (and
    only one for our case) mediated device.
 3. vfio_mdev.ko drives the mediated ccw device.
-   vfio_mdev is also the vfio device drvier. It will probe the mdev and
+   vfio_mdev is also the vfio device driver. It will probe the mdev and
    add it to an iommu_group and a vfio_group. Then we could pass through
    the mdev to a guest.
 

Re: [PATCH 23/35] Documentation: s390: correct spelling

[Heiko Carstens]

On Thu, Jan 26, 2023 at 10:39:53PM -0800, Randy Dunlap wrote:
> Correct spelling problems for Documentation/s390/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Heiko Carstens <hca@linux.ibm.com>
> Cc: Vasily Gorbik <gor@linux.ibm.com>
> Cc: Alexander Gordeev <agordeev@linux.ibm.com>
> Cc: linux-s390@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>  Documentation/s390/pci.rst      |    4 ++--
>  Documentation/s390/vfio-ccw.rst |    2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)

FWIW,

Acked-by: Heiko Carstens <hca@linux.ibm.com>

If you expect me to pick this up via the s390 tree, please let me know.

[PATCH 24/35] Documentation: scheduler: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/scheduler/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/scheduler/sched-bwc.rst    |    2 +-
 Documentation/scheduler/sched-energy.rst |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff -- a/Documentation/scheduler/sched-bwc.rst b/Documentation/scheduler/sched-bwc.rst
--- a/Documentation/scheduler/sched-bwc.rst
+++ b/Documentation/scheduler/sched-bwc.rst
@@ -186,7 +186,7 @@ average usage, albeit over a longer time
 also limits the burst ability to no more than 1ms per cpu.  This provides
 better more predictable user experience for highly threaded applications with
 small quota limits on high core count machines. It also eliminates the
-propensity to throttle these applications while simultanously using less than
+propensity to throttle these applications while simultaneously using less than
 quota amounts of cpu. Another way to say this, is that by allowing the unused
 portion of a slice to remain valid across periods we have decreased the
 possibility of wastefully expiring quota on cpu-local silos that don't need a
diff -- a/Documentation/scheduler/sched-energy.rst b/Documentation/scheduler/sched-energy.rst
--- a/Documentation/scheduler/sched-energy.rst
+++ b/Documentation/scheduler/sched-energy.rst
@@ -82,7 +82,7 @@ through the arch_scale_cpu_capacity() ca
 The rest of platform knowledge used by EAS is directly read from the Energy
 Model (EM) framework. The EM of a platform is composed of a power cost table
 per 'performance domain' in the system (see Documentation/power/energy-model.rst
-for futher details about performance domains).
+for further details about performance domains).
 
 The scheduler manages references to the EM objects in the topology code when the
 scheduling domains are built, or re-built. For each root domain (rd), the
@@ -281,7 +281,7 @@ mechanism called 'over-utilization'.
 From a general standpoint, the use-cases where EAS can help the most are those
 involving a light/medium CPU utilization. Whenever long CPU-bound tasks are
 being run, they will require all of the available CPU capacity, and there isn't
-much that can be done by the scheduler to save energy without severly harming
+much that can be done by the scheduler to save energy without severely harming
 throughput. In order to avoid hurting performance with EAS, CPUs are flagged as
 'over-utilized' as soon as they are used at more than 80% of their compute
 capacity. As long as no CPUs are over-utilized in a root domain, load balancing

Re: [PATCH 24/35] Documentation: scheduler: correct spelling

[Mukesh Ojha]

>Correct spelling problems for Documentation/scheduler/ as reported
>by codespell.
>
>Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>Cc: Ingo Molnar <mingo@redhat.com>
>Cc: Peter Zijlstra <peterz@infradead.org>
>Cc: Juri Lelli <juri.lelli@redhat.com>
>Cc: Vincent Guittot <vincent.guittot@linaro.org>
>Cc: Jonathan Corbet <corbet@lwn.net>
>Cc: linux-doc@vger.kernel.org

Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh

[PATCH 25/35] Documentation: security: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/security/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: keyrings@vger.kernel.org
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/security/digsig.rst       |    4 ++--
 Documentation/security/keys/core.rst    |    2 +-
 Documentation/security/secrets/coco.rst |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff -- a/Documentation/security/digsig.rst b/Documentation/security/digsig.rst
--- a/Documentation/security/digsig.rst
+++ b/Documentation/security/digsig.rst
@@ -62,7 +62,7 @@ API currently includes only 1 function::
 	* digsig_verify() - digital signature verification with public key
 	* @keyring:	keyring to search key in
 	* @sig:	digital signature
-	* @sigen:	length of the signature
+	* @siglen:	length of the signature
 	* @data:	data
 	* @datalen:	length of the data
 	* @return:	0 on success, -EINVAL otherwise
@@ -82,7 +82,7 @@ The signing and key management utilities
 to generate signatures, to load keys into the kernel keyring.
 Keys can be in PEM or converted to the kernel format.
 When the key is added to the kernel keyring, the keyid defines the name
-of the key: 5D2B05FC633EE3E8 in the example bellow.
+of the key: 5D2B05FC633EE3E8 in the example below.
 
 Here is example output of the keyctl utility::
 
diff -- a/Documentation/security/keys/core.rst b/Documentation/security/keys/core.rst
--- a/Documentation/security/keys/core.rst
+++ b/Documentation/security/keys/core.rst
@@ -869,7 +869,7 @@ The keyctl syscall functions are:
 
 	 - ``char *hashname`` specifies the NUL terminated string identifying
 	   the hash used from the kernel crypto API and applied for the KDF
-	   operation. The KDF implemenation complies with SP800-56A as well
+	   operation. The KDF implementation complies with SP800-56A as well
 	   as with SP800-108 (the counter KDF).
 
 	 - ``char *otherinfo`` specifies the OtherInfo data as documented in
diff -- a/Documentation/security/secrets/coco.rst b/Documentation/security/secrets/coco.rst
--- a/Documentation/security/secrets/coco.rst
+++ b/Documentation/security/secrets/coco.rst
@@ -34,7 +34,7 @@ be use it for its own purposes.
 
 During the VM's launch, the virtual machine manager may inject a secret to that
 area.  In AMD SEV and SEV-ES this is performed using the
-``KVM_SEV_LAUNCH_SECRET`` command (see [sev]_).  The strucutre of the injected
+``KVM_SEV_LAUNCH_SECRET`` command (see [sev]_).  The structure of the injected
 Guest Owner secret data should be a GUIDed table of secret values; the binary
 format is described in ``drivers/virt/coco/efi_secret/efi_secret.c`` under
 "Structure of the EFI secret area".

[PATCH 26/35] Documentation: sound: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/sound/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/sound/alsa-configuration.rst    |    8 ++++----
 Documentation/sound/cards/audigy-mixer.rst    |    2 +-
 Documentation/sound/cards/maya44.rst          |    2 +-
 Documentation/sound/cards/sb-live-mixer.rst   |    2 +-
 Documentation/sound/designs/jack-controls.rst |    2 +-
 Documentation/sound/designs/seq-oss.rst       |    2 +-
 Documentation/sound/hd-audio/notes.rst        |    2 +-
 7 files changed, 10 insertions(+), 10 deletions(-)

diff -- a/Documentation/sound/cards/audigy-mixer.rst b/Documentation/sound/cards/audigy-mixer.rst
--- a/Documentation/sound/cards/audigy-mixer.rst
+++ b/Documentation/sound/cards/audigy-mixer.rst
@@ -17,7 +17,7 @@ Digital mixer controls
 ======================
 
 These controls are built using the DSP instructions. They offer extended
-functionality. Only the default build-in code in the ALSA driver is described
+functionality. Only the default built-in code in the ALSA driver is described
 here. Note that the controls work as attenuators: the maximum value is the 
 neutral position leaving the signal unchanged. Note that if the  same destination 
 is mentioned in multiple controls, the signal is accumulated and can be wrapped 
diff -- a/Documentation/sound/cards/maya44.rst b/Documentation/sound/cards/maya44.rst
--- a/Documentation/sound/cards/maya44.rst
+++ b/Documentation/sound/cards/maya44.rst
@@ -156,7 +156,7 @@ IEC958 Output
     S/PDIF should output the same signal as channel 3+4. [untested!]
 
 
-Digitial output selectors
+Digital output selectors
     These switches allow a direct digital routing from the ADCs to the DACs.
     Each switch determines where the digital input data to one of the DACs comes from.
     They are not supported by the ESI windows driver.
diff -- a/Documentation/sound/designs/jack-controls.rst b/Documentation/sound/designs/jack-controls.rst
--- a/Documentation/sound/designs/jack-controls.rst
+++ b/Documentation/sound/designs/jack-controls.rst
@@ -8,7 +8,7 @@ Why we need Jack kcontrols
 ALSA uses kcontrols to export audio controls(switch, volume, Mux, ...)
 to user space. This means userspace applications like pulseaudio can
 switch off headphones and switch on speakers when no headphones are
-pluged in.
+plugged in.
 
 The old ALSA jack code only created input devices for each registered
 jack. These jack input devices are not readable by userspace devices
diff -- a/Documentation/sound/designs/seq-oss.rst b/Documentation/sound/designs/seq-oss.rst
--- a/Documentation/sound/designs/seq-oss.rst
+++ b/Documentation/sound/designs/seq-oss.rst
@@ -96,7 +96,7 @@ if you use an AWE64 card, you'll see lik
     Number of synth devices: 1
     synth 0: [EMU8000]
       type 0x1 : subtype 0x20 : voices 32
-      capabilties : ioctl enabled / load_patch enabled
+      capabilities : ioctl enabled / load_patch enabled
 
     Number of MIDI devices: 3
     midi 0: [Emu8000 Port-0] ALSA port 65:0
diff -- a/Documentation/sound/cards/sb-live-mixer.rst b/Documentation/sound/cards/sb-live-mixer.rst
--- a/Documentation/sound/cards/sb-live-mixer.rst
+++ b/Documentation/sound/cards/sb-live-mixer.rst
@@ -31,7 +31,7 @@ Digital mixer controls
 ======================
 
 These controls are built using the DSP instructions. They offer extended
-functionality. Only the default build-in code in the ALSA driver is described
+functionality. Only the default built-in code in the ALSA driver is described
 here. Note that the controls work as attenuators: the maximum value is the 
 neutral position leaving the signal unchanged. Note that if the  same destination 
 is mentioned in multiple controls, the signal is accumulated and can be wrapped 
diff -- a/Documentation/sound/hd-audio/notes.rst b/Documentation/sound/hd-audio/notes.rst
--- a/Documentation/sound/hd-audio/notes.rst
+++ b/Documentation/sound/hd-audio/notes.rst
@@ -500,7 +500,7 @@ add_jack_modes (bool)
     change the headphone amp and mic bias VREF capabilities
 power_save_node (bool)
     advanced power management for each widget, controlling the power
-    sate (D0/D3) of each widget node depending on the actual pin and
+    state (D0/D3) of each widget node depending on the actual pin and
     stream states
 power_down_unused (bool)
     power down the unused widgets, a subset of power_save_node, and
diff -- a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst
--- a/Documentation/sound/alsa-configuration.rst
+++ b/Documentation/sound/alsa-configuration.rst
@@ -70,7 +70,7 @@ dsp_map
     PCM device number maps assigned to the 1st OSS device;
     Default: 0
 adsp_map
-    PCM device number maps assigned to the 2st OSS device;
+    PCM device number maps assigned to the 2nd OSS device;
     Default: 1
 nonblock_open
     Don't block opening busy PCM devices;
@@ -97,7 +97,7 @@ midi_map
     MIDI device number maps assigned to the 1st OSS device;
     Default: 0
 amidi_map
-    MIDI device number maps assigned to the 2st OSS device;
+    MIDI device number maps assigned to the 2nd OSS device;
     Default: 1
 
 Module snd-soc-core
@@ -727,9 +727,9 @@ Module for EMU10K1/EMU10k2 based PCI sou
 * Sound Blaster Audigy
 	
 extin
-    bitmap of available external inputs for FX8010 (see bellow)
+    bitmap of available external inputs for FX8010 (see below)
 extout
-    bitmap of available external outputs for FX8010 (see bellow)
+    bitmap of available external outputs for FX8010 (see below)
 seq_ports
     allocated sequencer ports (4 by default)
 max_synth_voices

[PATCH 26/35] Documentation: sound: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/sound/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/sound/alsa-configuration.rst    |    8 ++++----
 Documentation/sound/cards/audigy-mixer.rst    |    2 +-
 Documentation/sound/cards/maya44.rst          |    2 +-
 Documentation/sound/cards/sb-live-mixer.rst   |    2 +-
 Documentation/sound/designs/jack-controls.rst |    2 +-
 Documentation/sound/designs/seq-oss.rst       |    2 +-
 Documentation/sound/hd-audio/notes.rst        |    2 +-
 7 files changed, 10 insertions(+), 10 deletions(-)

diff -- a/Documentation/sound/cards/audigy-mixer.rst b/Documentation/sound/cards/audigy-mixer.rst
--- a/Documentation/sound/cards/audigy-mixer.rst
+++ b/Documentation/sound/cards/audigy-mixer.rst
@@ -17,7 +17,7 @@ Digital mixer controls
 ======================
 
 These controls are built using the DSP instructions. They offer extended
-functionality. Only the default build-in code in the ALSA driver is described
+functionality. Only the default built-in code in the ALSA driver is described
 here. Note that the controls work as attenuators: the maximum value is the 
 neutral position leaving the signal unchanged. Note that if the  same destination 
 is mentioned in multiple controls, the signal is accumulated and can be wrapped 
diff -- a/Documentation/sound/cards/maya44.rst b/Documentation/sound/cards/maya44.rst
--- a/Documentation/sound/cards/maya44.rst
+++ b/Documentation/sound/cards/maya44.rst
@@ -156,7 +156,7 @@ IEC958 Output
     S/PDIF should output the same signal as channel 3+4. [untested!]
 
 
-Digitial output selectors
+Digital output selectors
     These switches allow a direct digital routing from the ADCs to the DACs.
     Each switch determines where the digital input data to one of the DACs comes from.
     They are not supported by the ESI windows driver.
diff -- a/Documentation/sound/designs/jack-controls.rst b/Documentation/sound/designs/jack-controls.rst
--- a/Documentation/sound/designs/jack-controls.rst
+++ b/Documentation/sound/designs/jack-controls.rst
@@ -8,7 +8,7 @@ Why we need Jack kcontrols
 ALSA uses kcontrols to export audio controls(switch, volume, Mux, ...)
 to user space. This means userspace applications like pulseaudio can
 switch off headphones and switch on speakers when no headphones are
-pluged in.
+plugged in.
 
 The old ALSA jack code only created input devices for each registered
 jack. These jack input devices are not readable by userspace devices
diff -- a/Documentation/sound/designs/seq-oss.rst b/Documentation/sound/designs/seq-oss.rst
--- a/Documentation/sound/designs/seq-oss.rst
+++ b/Documentation/sound/designs/seq-oss.rst
@@ -96,7 +96,7 @@ if you use an AWE64 card, you'll see lik
     Number of synth devices: 1
     synth 0: [EMU8000]
       type 0x1 : subtype 0x20 : voices 32
-      capabilties : ioctl enabled / load_patch enabled
+      capabilities : ioctl enabled / load_patch enabled
 
     Number of MIDI devices: 3
     midi 0: [Emu8000 Port-0] ALSA port 65:0
diff -- a/Documentation/sound/cards/sb-live-mixer.rst b/Documentation/sound/cards/sb-live-mixer.rst
--- a/Documentation/sound/cards/sb-live-mixer.rst
+++ b/Documentation/sound/cards/sb-live-mixer.rst
@@ -31,7 +31,7 @@ Digital mixer controls
 ======================
 
 These controls are built using the DSP instructions. They offer extended
-functionality. Only the default build-in code in the ALSA driver is described
+functionality. Only the default built-in code in the ALSA driver is described
 here. Note that the controls work as attenuators: the maximum value is the 
 neutral position leaving the signal unchanged. Note that if the  same destination 
 is mentioned in multiple controls, the signal is accumulated and can be wrapped 
diff -- a/Documentation/sound/hd-audio/notes.rst b/Documentation/sound/hd-audio/notes.rst
--- a/Documentation/sound/hd-audio/notes.rst
+++ b/Documentation/sound/hd-audio/notes.rst
@@ -500,7 +500,7 @@ add_jack_modes (bool)
     change the headphone amp and mic bias VREF capabilities
 power_save_node (bool)
     advanced power management for each widget, controlling the power
-    sate (D0/D3) of each widget node depending on the actual pin and
+    state (D0/D3) of each widget node depending on the actual pin and
     stream states
 power_down_unused (bool)
     power down the unused widgets, a subset of power_save_node, and
diff -- a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst
--- a/Documentation/sound/alsa-configuration.rst
+++ b/Documentation/sound/alsa-configuration.rst
@@ -70,7 +70,7 @@ dsp_map
     PCM device number maps assigned to the 1st OSS device;
     Default: 0
 adsp_map
-    PCM device number maps assigned to the 2st OSS device;
+    PCM device number maps assigned to the 2nd OSS device;
     Default: 1
 nonblock_open
     Don't block opening busy PCM devices;
@@ -97,7 +97,7 @@ midi_map
     MIDI device number maps assigned to the 1st OSS device;
     Default: 0
 amidi_map
-    MIDI device number maps assigned to the 2st OSS device;
+    MIDI device number maps assigned to the 2nd OSS device;
     Default: 1
 
 Module snd-soc-core
@@ -727,9 +727,9 @@ Module for EMU10K1/EMU10k2 based PCI sou
 * Sound Blaster Audigy
 	
 extin
-    bitmap of available external inputs for FX8010 (see bellow)
+    bitmap of available external inputs for FX8010 (see below)
 extout
-    bitmap of available external outputs for FX8010 (see bellow)
+    bitmap of available external outputs for FX8010 (see below)
 seq_ports
     allocated sequencer ports (4 by default)
 max_synth_voices

Re: [PATCH 26/35] Documentation: sound: correct spelling

[Takashi Iwai]

On Fri, 27 Jan 2023 07:39:56 +0100,
Randy Dunlap wrote:
> 
> Correct spelling problems for Documentation/sound/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jaroslav Kysela <perex@perex.cz>
> Cc: Takashi Iwai <tiwai@suse.com>
> Cc: alsa-devel@alsa-project.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org

Applied this one now to for-next branch.  Thanks.


Takashi

Re: [PATCH 26/35] Documentation: sound: correct spelling

[Takashi Iwai]

On Fri, 27 Jan 2023 07:39:56 +0100,
Randy Dunlap wrote:
> 
> Correct spelling problems for Documentation/sound/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jaroslav Kysela <perex@perex.cz>
> Cc: Takashi Iwai <tiwai@suse.com>
> Cc: alsa-devel@alsa-project.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org

Applied this one now to for-next branch.  Thanks.


Takashi

[PATCH 27/35] Documentation: spi: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/spi/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/spi/pxa2xx.rst      |   12 ++++++------
 Documentation/spi/spi-lm70llp.rst |    2 +-
 Documentation/spi/spi-summary.rst |    2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)

diff -- a/Documentation/spi/pxa2xx.rst b/Documentation/spi/pxa2xx.rst
--- a/Documentation/spi/pxa2xx.rst
+++ b/Documentation/spi/pxa2xx.rst
@@ -141,15 +141,15 @@ field. Below is a sample configuration u
 ::
 
   static struct pxa2xx_spi_chip cs8415a_chip_info = {
-	.tx_threshold = 8, /* SSP hardward FIFO threshold */
-	.rx_threshold = 8, /* SSP hardward FIFO threshold */
+	.tx_threshold = 8, /* SSP hardware FIFO threshold */
+	.rx_threshold = 8, /* SSP hardware FIFO threshold */
 	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
 	.timeout = 235, /* See Intel documentation */
   };
 
   static struct pxa2xx_spi_chip cs8405a_chip_info = {
-	.tx_threshold = 8, /* SSP hardward FIFO threshold */
-	.rx_threshold = 8, /* SSP hardward FIFO threshold */
+	.tx_threshold = 8, /* SSP hardware FIFO threshold */
+	.rx_threshold = 8, /* SSP hardware FIFO threshold */
 	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
 	.timeout = 235, /* See Intel documentation */
   };
@@ -157,7 +157,7 @@ field. Below is a sample configuration u
   static struct spi_board_info streetracer_spi_board_info[] __initdata = {
 	{
 		.modalias = "cs8415a", /* Name of spi_driver for this device */
-		.max_speed_hz = 3686400, /* Run SSP as fast a possbile */
+		.max_speed_hz = 3686400, /* Run SSP as fast a possible */
 		.bus_num = 2, /* Framework bus number */
 		.chip_select = 0, /* Framework chip select */
 		.platform_data = NULL; /* No spi_driver specific config */
@@ -166,7 +166,7 @@ field. Below is a sample configuration u
 	},
 	{
 		.modalias = "cs8405a", /* Name of spi_driver for this device */
-		.max_speed_hz = 3686400, /* Run SSP as fast a possbile */
+		.max_speed_hz = 3686400, /* Run SSP as fast a possible */
 		.bus_num = 2, /* Framework bus number */
 		.chip_select = 1, /* Framework chip select */
 		.controller_data = &cs8405a_chip_info, /* Master chip config */
diff -- a/Documentation/spi/spi-lm70llp.rst b/Documentation/spi/spi-lm70llp.rst
--- a/Documentation/spi/spi-lm70llp.rst
+++ b/Documentation/spi/spi-lm70llp.rst
@@ -57,7 +57,7 @@ devices might share the same SI/SO pin.
 The bitbanger routine in this driver (lm70_txrx) is called back from
 the bound "hwmon/lm70" protocol driver through its sysfs hook, using a
 spi_write_then_read() call.  It performs Mode 0 (SPI/Microwire) bitbanging.
-The lm70 driver then inteprets the resulting digital temperature value
+The lm70 driver then interprets the resulting digital temperature value
 and exports it through sysfs.
 
 A "gotcha": National Semiconductor's LM70 LLP eval board circuit schematic
diff -- a/Documentation/spi/spi-summary.rst b/Documentation/spi/spi-summary.rst
--- a/Documentation/spi/spi-summary.rst
+++ b/Documentation/spi/spi-summary.rst
@@ -105,7 +105,7 @@ find isn't necessarily helpful.  The fou
  - CPHA indicates the clock phase used to sample data; CPHA=0 says
    sample on the leading edge, CPHA=1 means the trailing edge.
 
-   Since the signal needs to stablize before it's sampled, CPHA=0
+   Since the signal needs to stabilize before it's sampled, CPHA=0
    implies that its data is written half a clock before the first
    clock edge.  The chipselect may have made it become available.
 

[PATCH 28/35] Documentation: target: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/target/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/target/tcmu-design.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/target/tcmu-design.rst b/Documentation/target/tcmu-design.rst
--- a/Documentation/target/tcmu-design.rst
+++ b/Documentation/target/tcmu-design.rst
@@ -171,7 +171,7 @@ When the opcode is CMD, the entry in the
 tcmu_cmd_entry. Userspace finds the SCSI CDB (Command Data Block) via
 tcmu_cmd_entry.req.cdb_off. This is an offset from the start of the
 overall shared memory region, not the entry. The data in/out buffers
-are accessible via tht req.iov[] array. iov_cnt contains the number of
+are accessible via the req.iov[] array. iov_cnt contains the number of
 entries in iov[] needed to describe either the Data-In or Data-Out
 buffers. For bidirectional commands, iov_cnt specifies how many iovec
 entries cover the Data-Out area, and iov_bidi_cnt specifies how many

Re: [PATCH 28/35] Documentation: target: correct spelling

[Martin K. Petersen]

Randy,

> Correct spelling problems for Documentation/target/ as reported
> by codespell.

Applied to 6.3/scsi-staging, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

[PATCH 29/35] Documentation: timers: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/timers/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/timers/hrtimers.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/timers/hrtimers.rst b/Documentation/timers/hrtimers.rst
--- a/Documentation/timers/hrtimers.rst
+++ b/Documentation/timers/hrtimers.rst
@@ -148,7 +148,7 @@ a given clock has - be it low-res, high-
 hrtimers - testing and verification
 -----------------------------------
 
-We used the high-resolution clock subsystem ontop of hrtimers to verify
+We used the high-resolution clock subsystem on top of hrtimers to verify
 the hrtimer implementation details in praxis, and we also ran the posix
 timer tests in order to ensure specification compliance. We also ran
 tests on low-resolution clocks.

[PATCH 30/35] Documentation: tools/rtla: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/tools/rtla/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/tools/rtla/rtla-timerlat-top.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/tools/rtla/rtla-timerlat-top.rst b/Documentation/tools/rtla/rtla-timerlat-top.rst
--- a/Documentation/tools/rtla/rtla-timerlat-top.rst
+++ b/Documentation/tools/rtla/rtla-timerlat-top.rst
@@ -128,7 +128,7 @@ and then when the *timerlat* thread was
 then be used as the starting point of a more fine-grained analysis.
 
 Note that **rtla timerlat** was dispatched without changing *timerlat* tracer
-threads' priority. That is generally not needed because these threads hava
+threads' priority. That is generally not needed because these threads have
 priority *FIFO:95* by default, which is a common priority used by real-time
 kernel developers to analyze scheduling delays.
 

Re: [PATCH 30/35] Documentation: tools/rtla: correct spelling

[Daniel Bristot de Oliveira]

On 1/27/23 07:40, Randy Dunlap wrote:
> Correct spelling problems for Documentation/tools/rtla/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: linux-trace-devel@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org

Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>

Thanks
-- Daniel

Re: [PATCH 30/35] Documentation: tools/rtla: correct spelling

[Steven Rostedt]

On Thu, 26 Jan 2023 22:40:00 -0800
Randy Dunlap <rdunlap@infradead.org> wrote:

> Correct spelling problems for Documentation/tools/rtla/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: linux-trace-devel@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---

Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>

-- Steve

>  Documentation/tools/rtla/rtla-timerlat-top.rst |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff -- a/Documentation/tools/rtla/rtla-timerlat-top.rst b/Documentation/tools/rtla/rtla-timerlat-top.rst
> --- a/Documentation/tools/rtla/rtla-timerlat-top.rst
> +++ b/Documentation/tools/rtla/rtla-timerlat-top.rst
> @@ -128,7 +128,7 @@ and then when the *timerlat* thread was
>  then be used as the starting point of a more fine-grained analysis.
>  
>  Note that **rtla timerlat** was dispatched without changing *timerlat* tracer
> -threads' priority. That is generally not needed because these threads hava
> +threads' priority. That is generally not needed because these threads have
>  priority *FIFO:95* by default, which is a common priority used by real-time
>  kernel developers to analyze scheduling delays.
>  

[PATCH 31/35] Documentation: trace: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/trace/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: linux-trace-kernel@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/trace/coresight/coresight-etm4x-reference.rst |    2 +-
 Documentation/trace/events.rst                              |    6 +++---
 Documentation/trace/fprobe.rst                              |    2 +-
 Documentation/trace/ftrace-uses.rst                         |    2 +-
 Documentation/trace/hwlat_detector.rst                      |    2 +-
 Documentation/trace/rv/runtime-verification.rst             |    2 +-
 Documentation/trace/uprobetracer.rst                        |    2 +-
 7 files changed, 9 insertions(+), 9 deletions(-)

diff -- a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
--- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
+++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
@@ -675,7 +675,7 @@ Bit assignments shown below:-
     reconstructed using only conditional branches.
 
     There is currently no support in Perf for supplying modified binaries to the decoder, so this
-    feature is only inteded to be used for debugging purposes or with a 3rd party tool.
+    feature is only intended to be used for debugging purposes or with a 3rd party tool.
 
     Choosing this option will result in a significant increase in the amount of trace generated -
     possible danger of overflows, or fewer instructions covered. Note, that this option also
diff -- a/Documentation/trace/events.rst b/Documentation/trace/events.rst
--- a/Documentation/trace/events.rst
+++ b/Documentation/trace/events.rst
@@ -903,7 +903,7 @@ functions can be used.
 
 To create a kprobe event, an empty or partially empty kprobe event
 should first be created using kprobe_event_gen_cmd_start().  The name
-of the event and the probe location should be specfied along with one
+of the event and the probe location should be specified along with one
 or args each representing a probe field should be supplied to this
 function.  Before calling kprobe_event_gen_cmd_start(), the user
 should create and initialize a dynevent_cmd object using
@@ -983,7 +983,7 @@ The basic idea is simple and amounts to
 layer that can be used to generate trace event commands.  The
 generated command strings can then be passed to the command-parsing
 and event creation code that already exists in the trace event
-subystem for creating the corresponding trace events.
+subsystem for creating the corresponding trace events.
 
 In a nutshell, the way it works is that the higher-level interface
 code creates a struct dynevent_cmd object, then uses a couple
@@ -1056,7 +1056,7 @@ to add an operator between the pair (her
 appended onto the end of the arg pair (here ';').
 
 There's also a dynevent_str_add() function that can be used to simply
-add a string as-is, with no spaces, delimeters, or arg check.
+add a string as-is, with no spaces, delimiters, or arg check.
 
 Any number of dynevent_*_add() calls can be made to build up the string
 (until its length surpasses cmd->maxlen).  When all the arguments have
diff -- a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst
--- a/Documentation/trace/fprobe.rst
+++ b/Documentation/trace/fprobe.rst
@@ -111,7 +111,7 @@ saved at function entry and passed to ex
         the instruction pointer of @regs may be different from the @entry_ip
         in the entry_handler. If you need traced instruction pointer, you need
         to use @entry_ip. On the other hand, in the exit_handler, the instruction
-        pointer of @regs is set to the currect return address.
+        pointer of @regs is set to the correct return address.
 
 Share the callbacks with kprobes
 ================================
diff -- a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst
--- a/Documentation/trace/ftrace-uses.rst
+++ b/Documentation/trace/ftrace-uses.rst
@@ -193,7 +193,7 @@ FTRACE_OPS_FL_RECURSION
 	Not, if this flag is set, then the callback will always be called
 	with preemption disabled. If it is not set, then it is possible
 	(but not guaranteed) that the callback will be called in
-	preemptable context.
+	preemptible context.
 
 FTRACE_OPS_FL_IPMODIFY
 	Requires FTRACE_OPS_FL_SAVE_REGS set. If the callback is to "hijack"
diff -- a/Documentation/trace/hwlat_detector.rst b/Documentation/trace/hwlat_detector.rst
--- a/Documentation/trace/hwlat_detector.rst
+++ b/Documentation/trace/hwlat_detector.rst
@@ -14,7 +14,7 @@ originally written for use by the "RT" p
 kernel is highly latency sensitive.
 
 SMIs are not serviced by the Linux kernel, which means that it does not
-even know that they are occuring. SMIs are instead set up by BIOS code
+even know that they are occurring. SMIs are instead set up by BIOS code
 and are serviced by BIOS code, usually for "critical" events such as
 management of thermal sensors and fans. Sometimes though, SMIs are used for
 other tasks and those tasks can spend an inordinate amount of time in the
diff -- a/Documentation/trace/rv/runtime-verification.rst b/Documentation/trace/rv/runtime-verification.rst
--- a/Documentation/trace/rv/runtime-verification.rst
+++ b/Documentation/trace/rv/runtime-verification.rst
@@ -31,7 +31,7 @@ In Linux terms, the runtime verification
 *RV monitor* abstraction. A *RV monitor* includes a reference model of the
 system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
 and so on), and the helper functions that glue the monitor to the system via
-trace, as depicted bellow::
+trace, as depicted below::
 
  Linux   +---- RV Monitor ----------------------------------+ Formal
   Realm  |                                                  |  Realm
diff -- a/Documentation/trace/uprobetracer.rst b/Documentation/trace/uprobetracer.rst
--- a/Documentation/trace/uprobetracer.rst
+++ b/Documentation/trace/uprobetracer.rst
@@ -55,7 +55,7 @@ Synopsis of uprobe_tracer
 
   (\*1) only for return probe.
   (\*2) this is useful for fetching a field of data structures.
-  (\*3) Unlike kprobe event, "u" prefix will just be ignored, becuse uprobe
+  (\*3) Unlike kprobe event, "u" prefix will just be ignored, because uprobe
         events can access only user-space memory.
 
 Types

[PATCH 31/35] Documentation: trace: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/trace/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: linux-trace-kernel@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/trace/coresight/coresight-etm4x-reference.rst |    2 +-
 Documentation/trace/events.rst                              |    6 +++---
 Documentation/trace/fprobe.rst                              |    2 +-
 Documentation/trace/ftrace-uses.rst                         |    2 +-
 Documentation/trace/hwlat_detector.rst                      |    2 +-
 Documentation/trace/rv/runtime-verification.rst             |    2 +-
 Documentation/trace/uprobetracer.rst                        |    2 +-
 7 files changed, 9 insertions(+), 9 deletions(-)

diff -- a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
--- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
+++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
@@ -675,7 +675,7 @@ Bit assignments shown below:-
     reconstructed using only conditional branches.
 
     There is currently no support in Perf for supplying modified binaries to the decoder, so this
-    feature is only inteded to be used for debugging purposes or with a 3rd party tool.
+    feature is only intended to be used for debugging purposes or with a 3rd party tool.
 
     Choosing this option will result in a significant increase in the amount of trace generated -
     possible danger of overflows, or fewer instructions covered. Note, that this option also
diff -- a/Documentation/trace/events.rst b/Documentation/trace/events.rst
--- a/Documentation/trace/events.rst
+++ b/Documentation/trace/events.rst
@@ -903,7 +903,7 @@ functions can be used.
 
 To create a kprobe event, an empty or partially empty kprobe event
 should first be created using kprobe_event_gen_cmd_start().  The name
-of the event and the probe location should be specfied along with one
+of the event and the probe location should be specified along with one
 or args each representing a probe field should be supplied to this
 function.  Before calling kprobe_event_gen_cmd_start(), the user
 should create and initialize a dynevent_cmd object using
@@ -983,7 +983,7 @@ The basic idea is simple and amounts to
 layer that can be used to generate trace event commands.  The
 generated command strings can then be passed to the command-parsing
 and event creation code that already exists in the trace event
-subystem for creating the corresponding trace events.
+subsystem for creating the corresponding trace events.
 
 In a nutshell, the way it works is that the higher-level interface
 code creates a struct dynevent_cmd object, then uses a couple
@@ -1056,7 +1056,7 @@ to add an operator between the pair (her
 appended onto the end of the arg pair (here ';').
 
 There's also a dynevent_str_add() function that can be used to simply
-add a string as-is, with no spaces, delimeters, or arg check.
+add a string as-is, with no spaces, delimiters, or arg check.
 
 Any number of dynevent_*_add() calls can be made to build up the string
 (until its length surpasses cmd->maxlen).  When all the arguments have
diff -- a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst
--- a/Documentation/trace/fprobe.rst
+++ b/Documentation/trace/fprobe.rst
@@ -111,7 +111,7 @@ saved at function entry and passed to ex
         the instruction pointer of @regs may be different from the @entry_ip
         in the entry_handler. If you need traced instruction pointer, you need
         to use @entry_ip. On the other hand, in the exit_handler, the instruction
-        pointer of @regs is set to the currect return address.
+        pointer of @regs is set to the correct return address.
 
 Share the callbacks with kprobes
 ================================
diff -- a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst
--- a/Documentation/trace/ftrace-uses.rst
+++ b/Documentation/trace/ftrace-uses.rst
@@ -193,7 +193,7 @@ FTRACE_OPS_FL_RECURSION
 	Not, if this flag is set, then the callback will always be called
 	with preemption disabled. If it is not set, then it is possible
 	(but not guaranteed) that the callback will be called in
-	preemptable context.
+	preemptible context.
 
 FTRACE_OPS_FL_IPMODIFY
 	Requires FTRACE_OPS_FL_SAVE_REGS set. If the callback is to "hijack"
diff -- a/Documentation/trace/hwlat_detector.rst b/Documentation/trace/hwlat_detector.rst
--- a/Documentation/trace/hwlat_detector.rst
+++ b/Documentation/trace/hwlat_detector.rst
@@ -14,7 +14,7 @@ originally written for use by the "RT" p
 kernel is highly latency sensitive.
 
 SMIs are not serviced by the Linux kernel, which means that it does not
-even know that they are occuring. SMIs are instead set up by BIOS code
+even know that they are occurring. SMIs are instead set up by BIOS code
 and are serviced by BIOS code, usually for "critical" events such as
 management of thermal sensors and fans. Sometimes though, SMIs are used for
 other tasks and those tasks can spend an inordinate amount of time in the
diff -- a/Documentation/trace/rv/runtime-verification.rst b/Documentation/trace/rv/runtime-verification.rst
--- a/Documentation/trace/rv/runtime-verification.rst
+++ b/Documentation/trace/rv/runtime-verification.rst
@@ -31,7 +31,7 @@ In Linux terms, the runtime verification
 *RV monitor* abstraction. A *RV monitor* includes a reference model of the
 system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
 and so on), and the helper functions that glue the monitor to the system via
-trace, as depicted bellow::
+trace, as depicted below::
 
  Linux   +---- RV Monitor ----------------------------------+ Formal
   Realm  |                                                  |  Realm
diff -- a/Documentation/trace/uprobetracer.rst b/Documentation/trace/uprobetracer.rst
--- a/Documentation/trace/uprobetracer.rst
+++ b/Documentation/trace/uprobetracer.rst
@@ -55,7 +55,7 @@ Synopsis of uprobe_tracer
 
   (\*1) only for return probe.
   (\*2) this is useful for fetching a field of data structures.
-  (\*3) Unlike kprobe event, "u" prefix will just be ignored, becuse uprobe
+  (\*3) Unlike kprobe event, "u" prefix will just be ignored, because uprobe
         events can access only user-space memory.
 
 Types

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 31/35] Documentation: trace: correct spelling

[Mukesh Ojha]

On 1/27/2023 12:10 PM, Randy Dunlap wrote:
> Correct spelling problems for Documentation/trace/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Masami Hiramatsu <mhiramat@kernel.org>
> Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
> Cc: linux-trace-kernel@vger.kernel.org
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: coresight@lists.linaro.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>   Documentation/trace/coresight/coresight-etm4x-reference.rst |    2 +-
>   Documentation/trace/events.rst                              |    6 +++---
>   Documentation/trace/fprobe.rst                              |    2 +-
>   Documentation/trace/ftrace-uses.rst                         |    2 +-
>   Documentation/trace/hwlat_detector.rst                      |    2 +-
>   Documentation/trace/rv/runtime-verification.rst             |    2 +-
>   Documentation/trace/uprobetracer.rst                        |    2 +-
>   7 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff -- a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> --- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
> +++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> @@ -675,7 +675,7 @@ Bit assignments shown below:-
>       reconstructed using only conditional branches.
>   
>       There is currently no support in Perf for supplying modified binaries to the decoder, so this
> -    feature is only inteded to be used for debugging purposes or with a 3rd party tool.
> +    feature is only intended to be used for debugging purposes or with a 3rd party tool.
>   
>       Choosing this option will result in a significant increase in the amount of trace generated -
>       possible danger of overflows, or fewer instructions covered. Note, that this option also
> diff -- a/Documentation/trace/events.rst b/Documentation/trace/events.rst
> --- a/Documentation/trace/events.rst
> +++ b/Documentation/trace/events.rst
> @@ -903,7 +903,7 @@ functions can be used.
>   
>   To create a kprobe event, an empty or partially empty kprobe event
>   should first be created using kprobe_event_gen_cmd_start().  The name
> -of the event and the probe location should be specfied along with one
> +of the event and the probe location should be specified along with one
>   or args each representing a probe field should be supplied to this
>   function.  Before calling kprobe_event_gen_cmd_start(), the user
>   should create and initialize a dynevent_cmd object using
> @@ -983,7 +983,7 @@ The basic idea is simple and amounts to
>   layer that can be used to generate trace event commands.  The
>   generated command strings can then be passed to the command-parsing
>   and event creation code that already exists in the trace event
> -subystem for creating the corresponding trace events.
> +subsystem for creating the corresponding trace events.
>   
>   In a nutshell, the way it works is that the higher-level interface
>   code creates a struct dynevent_cmd object, then uses a couple
> @@ -1056,7 +1056,7 @@ to add an operator between the pair (her
>   appended onto the end of the arg pair (here ';').
>   
>   There's also a dynevent_str_add() function that can be used to simply
> -add a string as-is, with no spaces, delimeters, or arg check.
> +add a string as-is, with no spaces, delimiters, or arg check.
>   
>   Any number of dynevent_*_add() calls can be made to build up the string
>   (until its length surpasses cmd->maxlen).  When all the arguments have
> diff -- a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst
> --- a/Documentation/trace/fprobe.rst
> +++ b/Documentation/trace/fprobe.rst
> @@ -111,7 +111,7 @@ saved at function entry and passed to ex
>           the instruction pointer of @regs may be different from the @entry_ip
>           in the entry_handler. If you need traced instruction pointer, you need
>           to use @entry_ip. On the other hand, in the exit_handler, the instruction
> -        pointer of @regs is set to the currect return address.
> +        pointer of @regs is set to the correct return address.
>   
>   Share the callbacks with kprobes
>   ================================
> diff -- a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst
> --- a/Documentation/trace/ftrace-uses.rst
> +++ b/Documentation/trace/ftrace-uses.rst
> @@ -193,7 +193,7 @@ FTRACE_OPS_FL_RECURSION
>   	Not, if this flag is set, then the callback will always be called
>   	with preemption disabled. If it is not set, then it is possible
>   	(but not guaranteed) that the callback will be called in
> -	preemptable context.
> +	preemptible context.
>   
>   FTRACE_OPS_FL_IPMODIFY
>   	Requires FTRACE_OPS_FL_SAVE_REGS set. If the callback is to "hijack"
> diff -- a/Documentation/trace/hwlat_detector.rst b/Documentation/trace/hwlat_detector.rst
> --- a/Documentation/trace/hwlat_detector.rst
> +++ b/Documentation/trace/hwlat_detector.rst
> @@ -14,7 +14,7 @@ originally written for use by the "RT" p
>   kernel is highly latency sensitive.
>   
>   SMIs are not serviced by the Linux kernel, which means that it does not
> -even know that they are occuring. SMIs are instead set up by BIOS code
> +even know that they are occurring. SMIs are instead set up by BIOS code
>   and are serviced by BIOS code, usually for "critical" events such as
>   management of thermal sensors and fans. Sometimes though, SMIs are used for
>   other tasks and those tasks can spend an inordinate amount of time in the
> diff -- a/Documentation/trace/rv/runtime-verification.rst b/Documentation/trace/rv/runtime-verification.rst
> --- a/Documentation/trace/rv/runtime-verification.rst
> +++ b/Documentation/trace/rv/runtime-verification.rst
> @@ -31,7 +31,7 @@ In Linux terms, the runtime verification
>   *RV monitor* abstraction. A *RV monitor* includes a reference model of the
>   system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
>   and so on), and the helper functions that glue the monitor to the system via
> -trace, as depicted bellow::
> +trace, as depicted below::
>   
>    Linux   +---- RV Monitor ----------------------------------+ Formal
>     Realm  |                                                  |  Realm
> diff -- a/Documentation/trace/uprobetracer.rst b/Documentation/trace/uprobetracer.rst
> --- a/Documentation/trace/uprobetracer.rst
> +++ b/Documentation/trace/uprobetracer.rst
> @@ -55,7 +55,7 @@ Synopsis of uprobe_tracer
>   
>     (\*1) only for return probe.
>     (\*2) this is useful for fetching a field of data structures.
> -  (\*3) Unlike kprobe event, "u" prefix will just be ignored, becuse uprobe
> +  (\*3) Unlike kprobe event, "u" prefix will just be ignored, because uprobe
>           events can access only user-space memory.
>   
>   Types


Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 31/35] Documentation: trace: correct spelling

[Mukesh Ojha]

On 1/27/2023 12:10 PM, Randy Dunlap wrote:
> Correct spelling problems for Documentation/trace/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Masami Hiramatsu <mhiramat@kernel.org>
> Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
> Cc: linux-trace-kernel@vger.kernel.org
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: coresight@lists.linaro.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>   Documentation/trace/coresight/coresight-etm4x-reference.rst |    2 +-
>   Documentation/trace/events.rst                              |    6 +++---
>   Documentation/trace/fprobe.rst                              |    2 +-
>   Documentation/trace/ftrace-uses.rst                         |    2 +-
>   Documentation/trace/hwlat_detector.rst                      |    2 +-
>   Documentation/trace/rv/runtime-verification.rst             |    2 +-
>   Documentation/trace/uprobetracer.rst                        |    2 +-
>   7 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff -- a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> --- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
> +++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> @@ -675,7 +675,7 @@ Bit assignments shown below:-
>       reconstructed using only conditional branches.
>   
>       There is currently no support in Perf for supplying modified binaries to the decoder, so this
> -    feature is only inteded to be used for debugging purposes or with a 3rd party tool.
> +    feature is only intended to be used for debugging purposes or with a 3rd party tool.
>   
>       Choosing this option will result in a significant increase in the amount of trace generated -
>       possible danger of overflows, or fewer instructions covered. Note, that this option also
> diff -- a/Documentation/trace/events.rst b/Documentation/trace/events.rst
> --- a/Documentation/trace/events.rst
> +++ b/Documentation/trace/events.rst
> @@ -903,7 +903,7 @@ functions can be used.
>   
>   To create a kprobe event, an empty or partially empty kprobe event
>   should first be created using kprobe_event_gen_cmd_start().  The name
> -of the event and the probe location should be specfied along with one
> +of the event and the probe location should be specified along with one
>   or args each representing a probe field should be supplied to this
>   function.  Before calling kprobe_event_gen_cmd_start(), the user
>   should create and initialize a dynevent_cmd object using
> @@ -983,7 +983,7 @@ The basic idea is simple and amounts to
>   layer that can be used to generate trace event commands.  The
>   generated command strings can then be passed to the command-parsing
>   and event creation code that already exists in the trace event
> -subystem for creating the corresponding trace events.
> +subsystem for creating the corresponding trace events.
>   
>   In a nutshell, the way it works is that the higher-level interface
>   code creates a struct dynevent_cmd object, then uses a couple
> @@ -1056,7 +1056,7 @@ to add an operator between the pair (her
>   appended onto the end of the arg pair (here ';').
>   
>   There's also a dynevent_str_add() function that can be used to simply
> -add a string as-is, with no spaces, delimeters, or arg check.
> +add a string as-is, with no spaces, delimiters, or arg check.
>   
>   Any number of dynevent_*_add() calls can be made to build up the string
>   (until its length surpasses cmd->maxlen).  When all the arguments have
> diff -- a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst
> --- a/Documentation/trace/fprobe.rst
> +++ b/Documentation/trace/fprobe.rst
> @@ -111,7 +111,7 @@ saved at function entry and passed to ex
>           the instruction pointer of @regs may be different from the @entry_ip
>           in the entry_handler. If you need traced instruction pointer, you need
>           to use @entry_ip. On the other hand, in the exit_handler, the instruction
> -        pointer of @regs is set to the currect return address.
> +        pointer of @regs is set to the correct return address.
>   
>   Share the callbacks with kprobes
>   ================================
> diff -- a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst
> --- a/Documentation/trace/ftrace-uses.rst
> +++ b/Documentation/trace/ftrace-uses.rst
> @@ -193,7 +193,7 @@ FTRACE_OPS_FL_RECURSION
>   	Not, if this flag is set, then the callback will always be called
>   	with preemption disabled. If it is not set, then it is possible
>   	(but not guaranteed) that the callback will be called in
> -	preemptable context.
> +	preemptible context.
>   
>   FTRACE_OPS_FL_IPMODIFY
>   	Requires FTRACE_OPS_FL_SAVE_REGS set. If the callback is to "hijack"
> diff -- a/Documentation/trace/hwlat_detector.rst b/Documentation/trace/hwlat_detector.rst
> --- a/Documentation/trace/hwlat_detector.rst
> +++ b/Documentation/trace/hwlat_detector.rst
> @@ -14,7 +14,7 @@ originally written for use by the "RT" p
>   kernel is highly latency sensitive.
>   
>   SMIs are not serviced by the Linux kernel, which means that it does not
> -even know that they are occuring. SMIs are instead set up by BIOS code
> +even know that they are occurring. SMIs are instead set up by BIOS code
>   and are serviced by BIOS code, usually for "critical" events such as
>   management of thermal sensors and fans. Sometimes though, SMIs are used for
>   other tasks and those tasks can spend an inordinate amount of time in the
> diff -- a/Documentation/trace/rv/runtime-verification.rst b/Documentation/trace/rv/runtime-verification.rst
> --- a/Documentation/trace/rv/runtime-verification.rst
> +++ b/Documentation/trace/rv/runtime-verification.rst
> @@ -31,7 +31,7 @@ In Linux terms, the runtime verification
>   *RV monitor* abstraction. A *RV monitor* includes a reference model of the
>   system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
>   and so on), and the helper functions that glue the monitor to the system via
> -trace, as depicted bellow::
> +trace, as depicted below::
>   
>    Linux   +---- RV Monitor ----------------------------------+ Formal
>     Realm  |                                                  |  Realm
> diff -- a/Documentation/trace/uprobetracer.rst b/Documentation/trace/uprobetracer.rst
> --- a/Documentation/trace/uprobetracer.rst
> +++ b/Documentation/trace/uprobetracer.rst
> @@ -55,7 +55,7 @@ Synopsis of uprobe_tracer
>   
>     (\*1) only for return probe.
>     (\*2) this is useful for fetching a field of data structures.
> -  (\*3) Unlike kprobe event, "u" prefix will just be ignored, becuse uprobe
> +  (\*3) Unlike kprobe event, "u" prefix will just be ignored, because uprobe
>           events can access only user-space memory.
>   
>   Types


Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>

-Mukesh
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 31/35] Documentation: trace: correct spelling

[Daniel Bristot de Oliveira]

On 1/27/23 07:40, Randy Dunlap wrote:
> --- a/Documentation/trace/rv/runtime-verification.rst
> +++ b/Documentation/trace/rv/runtime-verification.rst
> @@ -31,7 +31,7 @@ In Linux terms, the runtime verification
>  *RV monitor* abstraction. A *RV monitor* includes a reference model of the
>  system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
>  and so on), and the helper functions that glue the monitor to the system via
> -trace, as depicted bellow::
> +trace, as depicted below::
>  
>   Linux   +---- RV Monitor ----------------------------------+ Formal
>    Realm  |                                                  |  Realm

Do you mind making the rv part an independent patch?

Spiting it helps in the backport of the fix to stable/distro kernels.

-- Daniel

Re: [PATCH 31/35] Documentation: trace: correct spelling

[Daniel Bristot de Oliveira]

On 1/27/23 07:40, Randy Dunlap wrote:
> --- a/Documentation/trace/rv/runtime-verification.rst
> +++ b/Documentation/trace/rv/runtime-verification.rst
> @@ -31,7 +31,7 @@ In Linux terms, the runtime verification
>  *RV monitor* abstraction. A *RV monitor* includes a reference model of the
>  system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
>  and so on), and the helper functions that glue the monitor to the system via
> -trace, as depicted bellow::
> +trace, as depicted below::
>  
>   Linux   +---- RV Monitor ----------------------------------+ Formal
>    Realm  |                                                  |  Realm

Do you mind making the rv part an independent patch?

Spiting it helps in the backport of the fix to stable/distro kernels.

-- Daniel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 31/35] Documentation: trace: correct spelling

[Randy Dunlap]

On 1/27/23 00:54, Daniel Bristot de Oliveira wrote:
> On 1/27/23 07:40, Randy Dunlap wrote:
>> --- a/Documentation/trace/rv/runtime-verification.rst
>> +++ b/Documentation/trace/rv/runtime-verification.rst
>> @@ -31,7 +31,7 @@ In Linux terms, the runtime verification
>>  *RV monitor* abstraction. A *RV monitor* includes a reference model of the
>>  system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
>>  and so on), and the helper functions that glue the monitor to the system via
>> -trace, as depicted bellow::
>> +trace, as depicted below::
>>  
>>   Linux   +---- RV Monitor ----------------------------------+ Formal
>>    Realm  |                                                  |  Realm
> 
> Do you mind making the rv part an independent patch?
> 
> Spiting it helps in the backport of the fix to stable/distro kernels.

I wouldn't expect this to be packported. stable-kernel-rules.rst says:

 - It cannot contain any "trivial" fixes in it (spelling changes,
   whitespace cleanups, etc).

-- 
~Randy

Re: [PATCH 31/35] Documentation: trace: correct spelling

[Randy Dunlap]

On 1/27/23 00:54, Daniel Bristot de Oliveira wrote:
> On 1/27/23 07:40, Randy Dunlap wrote:
>> --- a/Documentation/trace/rv/runtime-verification.rst
>> +++ b/Documentation/trace/rv/runtime-verification.rst
>> @@ -31,7 +31,7 @@ In Linux terms, the runtime verification
>>  *RV monitor* abstraction. A *RV monitor* includes a reference model of the
>>  system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
>>  and so on), and the helper functions that glue the monitor to the system via
>> -trace, as depicted bellow::
>> +trace, as depicted below::
>>  
>>   Linux   +---- RV Monitor ----------------------------------+ Formal
>>    Realm  |                                                  |  Realm
> 
> Do you mind making the rv part an independent patch?
> 
> Spiting it helps in the backport of the fix to stable/distro kernels.

I wouldn't expect this to be packported. stable-kernel-rules.rst says:

 - It cannot contain any "trivial" fixes in it (spelling changes,
   whitespace cleanups, etc).

-- 
~Randy

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 31/35] Documentation: trace: correct spelling

[Steven Rostedt]

On Thu, 26 Jan 2023 22:40:01 -0800
Randy Dunlap <rdunlap@infradead.org> wrote:

> Correct spelling problems for Documentation/trace/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Masami Hiramatsu <mhiramat@kernel.org>
> Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
> Cc: linux-trace-kernel@vger.kernel.org
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: coresight@lists.linaro.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---

Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>

-- Steve

>  Documentation/trace/coresight/coresight-etm4x-reference.rst |    2 +-
>  Documentation/trace/events.rst                              |    6 +++---
>  Documentation/trace/fprobe.rst                              |    2 +-
>  Documentation/trace/ftrace-uses.rst                         |    2 +-
>  Documentation/trace/hwlat_detector.rst                      |    2 +-
>  Documentation/trace/rv/runtime-verification.rst             |    2 +-
>  Documentation/trace/uprobetracer.rst                        |    2 +-
>  7 files changed, 9 insertions(+), 9 deletions(-)
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 31/35] Documentation: trace: correct spelling

[Steven Rostedt]

On Thu, 26 Jan 2023 22:40:01 -0800
Randy Dunlap <rdunlap@infradead.org> wrote:

> Correct spelling problems for Documentation/trace/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Masami Hiramatsu <mhiramat@kernel.org>
> Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
> Cc: linux-trace-kernel@vger.kernel.org
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: coresight@lists.linaro.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---

Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>

-- Steve

>  Documentation/trace/coresight/coresight-etm4x-reference.rst |    2 +-
>  Documentation/trace/events.rst                              |    6 +++---
>  Documentation/trace/fprobe.rst                              |    2 +-
>  Documentation/trace/ftrace-uses.rst                         |    2 +-
>  Documentation/trace/hwlat_detector.rst                      |    2 +-
>  Documentation/trace/rv/runtime-verification.rst             |    2 +-
>  Documentation/trace/uprobetracer.rst                        |    2 +-
>  7 files changed, 9 insertions(+), 9 deletions(-)
> 

Re: [PATCH 31/35] Documentation: trace: correct spelling

[Suzuki K Poulose]

On 27/01/2023 06:40, Randy Dunlap wrote:
> Correct spelling problems for Documentation/trace/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Masami Hiramatsu <mhiramat@kernel.org>
> Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
> Cc: linux-trace-kernel@vger.kernel.org
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: coresight@lists.linaro.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>   Documentation/trace/coresight/coresight-etm4x-reference.rst |    2 +-
>   Documentation/trace/events.rst                              |    6 +++---
>   Documentation/trace/fprobe.rst                              |    2 +-
>   Documentation/trace/ftrace-uses.rst                         |    2 +-
>   Documentation/trace/hwlat_detector.rst                      |    2 +-
>   Documentation/trace/rv/runtime-verification.rst             |    2 +-
>   Documentation/trace/uprobetracer.rst                        |    2 +-
>   7 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff -- a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> --- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
> +++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> @@ -675,7 +675,7 @@ Bit assignments shown below:-
>       reconstructed using only conditional branches.
>   
>       There is currently no support in Perf for supplying modified binaries to the decoder, so this
> -    feature is only inteded to be used for debugging purposes or with a 3rd party tool.
> +    feature is only intended to be used for debugging purposes or with a 3rd party tool.
>   
>       Choosing this option will result in a significant increase in the amount of trace generated -
>       possible danger of overflows, or fewer instructions covered. Note, that this option also

For the above:

Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>

Thanks
Suzuki

Re: [PATCH 31/35] Documentation: trace: correct spelling

[Suzuki K Poulose]

On 27/01/2023 06:40, Randy Dunlap wrote:
> Correct spelling problems for Documentation/trace/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Masami Hiramatsu <mhiramat@kernel.org>
> Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
> Cc: linux-trace-kernel@vger.kernel.org
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: coresight@lists.linaro.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>   Documentation/trace/coresight/coresight-etm4x-reference.rst |    2 +-
>   Documentation/trace/events.rst                              |    6 +++---
>   Documentation/trace/fprobe.rst                              |    2 +-
>   Documentation/trace/ftrace-uses.rst                         |    2 +-
>   Documentation/trace/hwlat_detector.rst                      |    2 +-
>   Documentation/trace/rv/runtime-verification.rst             |    2 +-
>   Documentation/trace/uprobetracer.rst                        |    2 +-
>   7 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff -- a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> --- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
> +++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> @@ -675,7 +675,7 @@ Bit assignments shown below:-
>       reconstructed using only conditional branches.
>   
>       There is currently no support in Perf for supplying modified binaries to the decoder, so this
> -    feature is only inteded to be used for debugging purposes or with a 3rd party tool.
> +    feature is only intended to be used for debugging purposes or with a 3rd party tool.
>   
>       Choosing this option will result in a significant increase in the amount of trace generated -
>       possible danger of overflows, or fewer instructions covered. Note, that this option also

For the above:

Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>

Thanks
Suzuki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 32/35] Documentation: usb: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/usb/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/usb/chipidea.rst       |   19 ++++++++++---------
 Documentation/usb/gadget-testing.rst |    2 +-
 Documentation/usb/mass-storage.rst   |    2 +-
 3 files changed, 12 insertions(+), 11 deletions(-)

diff -- a/Documentation/usb/chipidea.rst b/Documentation/usb/chipidea.rst
--- a/Documentation/usb/chipidea.rst
+++ b/Documentation/usb/chipidea.rst
@@ -35,10 +35,10 @@ which can show otg fsm variables and som
 1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded
    (e.g. g_mass_storage).
 
-2) Connect 2 boards with usb cable with one end is micro A plug, the other end
+2) Connect 2 boards with usb cable: one end is micro A plug, the other end
    is micro B plug.
 
-   The A-device(with micro A plug inserted) should enumerate B-device.
+   The A-device (with micro A plug inserted) should enumerate B-device.
 
 3) Role switch
 
@@ -54,18 +54,19 @@ which can show otg fsm variables and som
 
 	echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
 
-   or, by introducing HNP polling, B-Host can know when A-peripheral wish
-   to be host role, so this role switch also can be trigged in A-peripheral
-   side by answering the polling from B-Host, this can be done on A-device::
+   or, by introducing HNP polling, B-Host can know when A-peripheral wishes to
+   be in the host role, so this role switch also can be triggered in
+   A-peripheral side by answering the polling from B-Host. This can be done on
+   A-device::
 
 	echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
 
    A-device should switch back to host and enumerate B-device.
 
-5) Remove B-device(unplug micro B plug) and insert again in 10 seconds,
+5) Remove B-device (unplug micro B plug) and insert again in 10 seconds;
    A-device should enumerate B-device again.
 
-6) Remove B-device(unplug micro B plug) and insert again after 10 seconds,
+6) Remove B-device (unplug micro B plug) and insert again after 10 seconds;
    A-device should NOT enumerate B-device.
 
    if A-device wants to use bus:
@@ -105,7 +106,7 @@ July 27, 2012 Revision 2.0 version 1.1a"
 2. How to enable USB as system wakeup source
 --------------------------------------------
 Below is the example for how to enable USB as system wakeup source
-at imx6 platform.
+on an imx6 platform.
 
 2.1 Enable core's wakeup::
 
@@ -128,6 +129,6 @@ at imx6 platform.
 	echo enabled > /sys/bus/usb/devices/1-1/power/wakeup
 
 If the system has only one usb port, and you want usb wakeup at this port, you
-can use below script to enable usb wakeup::
+can use the below script to enable usb wakeup::
 
 	for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done;
diff -- a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst
--- a/Documentation/usb/gadget-testing.rst
+++ b/Documentation/usb/gadget-testing.rst
@@ -813,7 +813,7 @@ the user must provide the following:
 	================== ====================================================
 
 Each frame description contains frame interval specification, and each
-such specification consists of a number of lines with an inverval value
+such specification consists of a number of lines with an interval value
 in each line. The rules stated above are best illustrated with an example::
 
   # mkdir functions/uvc.usb0/control/header/h
diff -- a/Documentation/usb/mass-storage.rst b/Documentation/usb/mass-storage.rst
--- a/Documentation/usb/mass-storage.rst
+++ b/Documentation/usb/mass-storage.rst
@@ -150,7 +150,7 @@ Module parameters
   - bcdDevice     -- USB Device version (BCD) (16 bit integer)
   - iManufacturer -- USB Manufacturer string (string)
   - iProduct      -- USB Product string (string)
-  - iSerialNumber -- SerialNumber string (sting)
+  - iSerialNumber -- SerialNumber string (string)
 
 sysfs entries
 =============

[PATCH 33/35] Documentation: w1: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/w1/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/w1/w1-netlink.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/w1/w1-netlink.rst b/Documentation/w1/w1-netlink.rst
--- a/Documentation/w1/w1-netlink.rst
+++ b/Documentation/w1/w1-netlink.rst
@@ -66,7 +66,7 @@ Each connector message can include one o
 zero or more attached w1_netlink_cmd messages.
 
 For event messages there are no w1_netlink_cmd embedded structures,
-only connector header and w1_netlink_msg strucutre with "len" field
+only connector header and w1_netlink_msg structure with "len" field
 being zero and filled type (one of event types) and id:
 either 8 bytes of slave unique id in host order,
 or master's id, which is assigned to bus master device

[PATCH 34/35] Documentation: x86: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/x86/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: linux-sgx@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/x86/boot.rst    |    2 +-
 Documentation/x86/buslock.rst |    2 +-
 Documentation/x86/mds.rst     |    2 +-
 Documentation/x86/resctrl.rst |    2 +-
 Documentation/x86/sgx.rst     |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff -- a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst
--- a/Documentation/x86/boot.rst
+++ b/Documentation/x86/boot.rst
@@ -1105,7 +1105,7 @@ The kernel command line should not be lo
 code, nor should it be located in high memory.
 
 
-Sample Boot Configuartion
+Sample Boot Configuration
 =========================
 
 As a sample configuration, assume the following layout of the real
diff -- a/Documentation/x86/buslock.rst b/Documentation/x86/buslock.rst
--- a/Documentation/x86/buslock.rst
+++ b/Documentation/x86/buslock.rst
@@ -32,7 +32,7 @@ mechanisms to detect split locks and bus
 --------------------------------------
 
 Beginning with the Tremont Atom CPU split lock operations may raise an
-Alignment Check (#AC) exception when a split lock operation is attemped.
+Alignment Check (#AC) exception when a split lock operation is attempted.
 
 #DB exception for bus lock detection
 ------------------------------------
diff -- a/Documentation/x86/mds.rst b/Documentation/x86/mds.rst
--- a/Documentation/x86/mds.rst
+++ b/Documentation/x86/mds.rst
@@ -60,7 +60,7 @@ needed for exploiting MDS requires:
    data
 
 The existence of such a construct in the kernel cannot be excluded with
-100% certainty, but the complexity involved makes it extremly unlikely.
+100% certainty, but the complexity involved makes it extremely unlikely.
 
 There is one exception, which is untrusted BPF. The functionality of
 untrusted BPF is limited, but it needs to be thoroughly investigated
diff -- a/Documentation/x86/resctrl.rst b/Documentation/x86/resctrl.rst
--- a/Documentation/x86/resctrl.rst
+++ b/Documentation/x86/resctrl.rst
@@ -487,7 +487,7 @@ this would be dependent on number of cor
    depending on # of threads:
 
 For the same SKU in #1, a 'single thread, with 10% bandwidth' and '4
-thread, with 10% bandwidth' can consume upto 10GBps and 40GBps although
+thread, with 10% bandwidth' can consume up to 10GBps and 40GBps although
 they have same percentage bandwidth of 10%. This is simply because as
 threads start using more cores in an rdtgroup, the actual bandwidth may
 increase or vary although user specified bandwidth percentage is same.
diff -- a/Documentation/x86/sgx.rst b/Documentation/x86/sgx.rst
--- a/Documentation/x86/sgx.rst
+++ b/Documentation/x86/sgx.rst
@@ -245,7 +245,7 @@ SGX will likely become unusable because
 limited. However, while this may be fatal to SGX, the rest of the kernel
 is unlikely to be impacted and should continue to work.
 
-As a result, when this happpens, user should stop running any new
+As a result, when this happens, the user should stop running any new
 SGX workloads, (or just any new workloads), and migrate all valuable
 workloads. Although a machine reboot can recover all EPC memory, the bug
 should be reported to Linux developers.

[PATCH 35/35] Documentation: xtensa: correct spelling

[Randy Dunlap]

Correct spelling problems for Documentation/xtensa/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/xtensa/atomctl.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff -- a/Documentation/xtensa/atomctl.rst b/Documentation/xtensa/atomctl.rst
--- a/Documentation/xtensa/atomctl.rst
+++ b/Documentation/xtensa/atomctl.rst
@@ -23,7 +23,7 @@ doing a Cached (WB) transaction and use
 operations.
 
 For systems without an coherent cache controller, non-MX, we always
-use the memory controllers RCW, thought non-MX controlers likely
+use the memory controllers RCW, though non-MX controllers likely
 support the Internal Operation.
 
 CUSTOMER-WARNING:

Re: [PATCH 35/35] Documentation: xtensa: correct spelling

[Max Filippov]

On Thu, Jan 26, 2023 at 10:40 PM Randy Dunlap <rdunlap@infradead.org> wrote:
>
> Correct spelling problems for Documentation/xtensa/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Chris Zankel <chris@zankel.net>
> Cc: Max Filippov <jcmvbkbc@gmail.com>
> Cc: linux-xtensa@linux-xtensa.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>  Documentation/xtensa/atomctl.rst |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Acked-by: Max Filippov <jcmvbkbc@gmail.com>

-- 
Thanks.
-- Max

Re: [PATCH 15/35] Documentation: litmus-tests: correct spelling

[David Howells]

Randy Dunlap <rdunlap@infradead.org> wrote:

> Correct spelling problems for Documentation/litmus-tests/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Cc: Andrea Parri <parri.andrea@gmail.com>
> Cc: Will Deacon <will@kernel.org>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Boqun Feng <boqun.feng@gmail.com>
> Cc: Nicholas Piggin <npiggin@gmail.com>
> Cc: David Howells <dhowells@redhat.com>
> Cc: Jade Alglave <j.alglave@ucl.ac.uk>
> Cc: Luc Maranget <luc.maranget@inria.fr>
> Cc: "Paul E. McKenney" <paulmck@kernel.org>
> Cc: linux-arch@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org

Reviewed-by: David Howells <dhowells@redhat.com>

Re: [PATCH 15/35] Documentation: litmus-tests: correct spelling

[Paul E. McKenney]

On Fri, Jan 27, 2023 at 06:59:08AM +0000, David Howells wrote:
> Randy Dunlap <rdunlap@infradead.org> wrote:
> 
> > Correct spelling problems for Documentation/litmus-tests/ as reported
> > by codespell.
> > 
> > Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> > Cc: Alan Stern <stern@rowland.harvard.edu>
> > Cc: Andrea Parri <parri.andrea@gmail.com>
> > Cc: Will Deacon <will@kernel.org>
> > Cc: Peter Zijlstra <peterz@infradead.org>
> > Cc: Boqun Feng <boqun.feng@gmail.com>
> > Cc: Nicholas Piggin <npiggin@gmail.com>
> > Cc: David Howells <dhowells@redhat.com>
> > Cc: Jade Alglave <j.alglave@ucl.ac.uk>
> > Cc: Luc Maranget <luc.maranget@inria.fr>
> > Cc: "Paul E. McKenney" <paulmck@kernel.org>
> > Cc: linux-arch@vger.kernel.org
> > Cc: Jonathan Corbet <corbet@lwn.net>
> > Cc: linux-doc@vger.kernel.org
> 
> Reviewed-by: David Howells <dhowells@redhat.com>

Queued for v6.4, thank you both!

							Thanx, Paul

Re: [PATCH 25/35] Documentation: security: correct spelling

[David Howells]

Randy Dunlap <rdunlap@infradead.org> wrote:

> Correct spelling problems for Documentation/security/ as reported
> by codespell.
> 
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: David Howells <dhowells@redhat.com>
> Cc: Jarkko Sakkinen <jarkko@kernel.org>
> Cc: keyrings@vger.kernel.org
> Cc: Paul Moore <paul@paul-moore.com>
> Cc: James Morris <jmorris@namei.org>
> Cc: "Serge E. Hallyn" <serge@hallyn.com>
> Cc: linux-security-module@vger.kernel.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org

Reviewed-by: David Howells <dhowells@redhat.com>

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Mark Brown]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to

   broonie/spi.git for-next

Thanks!

[27/35] Documentation: spi: correct spelling
        commit: 0f6d2cee58f1ff2ebf66f0bceb113d79f66ecb07

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Mark Brown]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to

   broonie/spi.git for-next

Thanks!

[27/35] Documentation: spi: correct spelling
        commit: 0f6d2cee58f1ff2ebf66f0bceb113d79f66ecb07

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Mark Brown]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to

   broonie/spi.git for-next

Thanks!

[27/35] Documentation: spi: correct spelling
        commit: 0f6d2cee58f1ff2ebf66f0bceb113d79f66ecb07

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Mark Brown]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to

   broonie/spi.git for-next

Thanks!

[27/35] Documentation: spi: correct spelling
        commit: 0f6d2cee58f1ff2ebf66f0bceb113d79f66ecb07

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[patchwork-bot+netdevbpf]

Hello:

This series was applied to bpf/bpf-next.git (master)
by Alexei Starovoitov <ast@kernel.org>:

On Thu, 26 Jan 2023 22:39:30 -0800 you wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Here is the summary with links:
  - [04/35] Documentation: bpf: correct spelling
    https://git.kernel.org/bpf/bpf-next/c/1d3cab43f4c7
  - [05/35] Documentation: core-api: correct spelling
    (no matching commit)
  - [13/35] Documentation: isdn: correct spelling
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[patchwork-bot+netdevbpf]

Hello:

This series was applied to bpf/bpf-next.git (master)
by Alexei Starovoitov <ast@kernel.org>:

On Thu, 26 Jan 2023 22:39:30 -0800 you wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Here is the summary with links:
  - [04/35] Documentation: bpf: correct spelling
    https://git.kernel.org/bpf/bpf-next/c/1d3cab43f4c7
  - [05/35] Documentation: core-api: correct spelling
    (no matching commit)
  - [13/35] Documentation: isdn: correct spelling
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[patchwork-bot+netdevbpf]

Hello:

This series was applied to bpf/bpf-next.git (master)
by Alexei Starovoitov <ast@kernel.org>:

On Thu, 26 Jan 2023 22:39:30 -0800 you wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Here is the summary with links:
  - [04/35] Documentation: bpf: correct spelling
    https://git.kernel.org/bpf/bpf-next/c/1d3cab43f4c7
  - [05/35] Documentation: core-api: correct spelling
    (no matching commit)
  - [13/35] Documentation: isdn: correct spelling
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[patchwork-bot+netdevbpf]

Hello:

This series was applied to bpf/bpf-next.git (master)
by Alexei Starovoitov <ast@kernel.org>:

On Thu, 26 Jan 2023 22:39:30 -0800 you wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Here is the summary with links:
  - [04/35] Documentation: bpf: correct spelling
    https://git.kernel.org/bpf/bpf-next/c/1d3cab43f4c7
  - [05/35] Documentation: core-api: correct spelling
    (no matching commit)
  - [13/35] Documentation: isdn: correct spelling
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Catalin Marinas]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to arm64 (for-next/misc), thanks!

[01/35] Documentation: arm64: correct spelling
        https://git.kernel.org/arm64/c/a70f00e7f1a3

-- 
Catalin

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Catalin Marinas]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to arm64 (for-next/misc), thanks!

[01/35] Documentation: arm64: correct spelling
        https://git.kernel.org/arm64/c/a70f00e7f1a3

-- 
Catalin

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Catalin Marinas]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to arm64 (for-next/misc), thanks!

[01/35] Documentation: arm64: correct spelling
        https://git.kernel.org/arm64/c/a70f00e7f1a3

-- 
Catalin

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Catalin Marinas]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:
> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to arm64 (for-next/misc), thanks!

[01/35] Documentation: arm64: correct spelling
        https://git.kernel.org/arm64/c/a70f00e7f1a3

-- 
Catalin

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Martin K. Petersen]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:

> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to 6.3/scsi-queue, thanks!

[28/35] Documentation: target: correct spelling
        https://git.kernel.org/mkp/scsi/c/c57ac5748be5

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Martin K. Petersen]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:

> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to 6.3/scsi-queue, thanks!

[28/35] Documentation: target: correct spelling
        https://git.kernel.org/mkp/scsi/c/c57ac5748be5

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Martin K. Petersen]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:

> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to 6.3/scsi-queue, thanks!

[28/35] Documentation: target: correct spelling
        https://git.kernel.org/mkp/scsi/c/c57ac5748be5

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)

[Martin K. Petersen]

On Thu, 26 Jan 2023 22:39:30 -0800, Randy Dunlap wrote:

> Correct many spelling errors in Documentation/ as reported by codespell.
> 
> Maintainers of specific kernel subsystems are only Cc-ed on their
> respective patches, not the entire series. [if all goes well]
> 
> These patches are based on linux-next-20230125.
> 
> [...]

Applied to 6.3/scsi-queue, thanks!

[28/35] Documentation: target: correct spelling
        https://git.kernel.org/mkp/scsi/c/c57ac5748be5

-- 
Martin K. Petersen	Oracle Linux Engineering