[Buildroot] [PATCH v4 1/3] package/clapack: introduce BR2_PACKAGE_CLAPACK_ARCH_SUPPORTS

[Buildroot] [PATCH v4 1/3] package/clapack: introduce BR2_PACKAGE_CLAPACK_ARCH_SUPPORTS

[Arnout Vandecappelle (Essensium/Mind)]

This makes it easier for packages that depend on clapack to get
their dependencies correct.

Since the glibc dependency only exists for PowerPC, treat it as
an architecture dependency.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
 package/clapack/Config.in | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/package/clapack/Config.in b/package/clapack/Config.in
index a912eb6c91..98f94b0e60 100644
--- a/package/clapack/Config.in
+++ b/package/clapack/Config.in
@@ -1,14 +1,19 @@
+config BR2_PACKAGE_CLAPACK_ARCH_SUPPORTS
+	bool
+	default y
+	# assembler: Error: value out of range
+	depends on !BR2_m68k_cf
+	# _fpu_control is used on PowerPC, but not available with
+	# uClibc or musl
+	depends on !BR2_powerpc || BR2_TOOLCHAIN_USES_GLIBC
+
 comment "clapack needs a glibc toolchain"
 	depends on BR2_powerpc
 	depends on !BR2_TOOLCHAIN_USES_GLIBC
 
 config BR2_PACKAGE_CLAPACK
 	bool "cblas/clapack"
-	# _fpu_control is used on PowerPC, but not available with
-	# uClibc or musl
-	depends on !BR2_powerpc || BR2_TOOLCHAIN_USES_GLIBC
-	# assembler: Error: value out of range
-	depends on !BR2_m68k_cf
+	depends on BR2_PACKAGE_CLAPACK_ARCH_SUPPORTS
 	help
 	  BLAS and LAPACK C implementation (f2c'ed version of).
 
-- 
2.31.1

_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

[Buildroot] [PATCH v4 2/3] package/lapack: introduce BR2_PACKAGE_LAPACK_ARCH_SUPPORTS

[Arnout Vandecappelle (Essensium/Mind)]

This makes it easier for packages that depend on lapack to get
their dependencies correct.

Since the !uClibc dependency only exists for PowerPC, treat it as
an architecture dependency.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
 package/lapack/Config.in | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/package/lapack/Config.in b/package/lapack/Config.in
index 6cd0810cb1..ee7aeae7a8 100644
--- a/package/lapack/Config.in
+++ b/package/lapack/Config.in
@@ -1,13 +1,18 @@
-comment "lapack/blas needs a toolchain w/ fortran"
+config BR2_PACKAGE_LAPACK_ARCH_SUPPORTS
+	bool
+	default y
+	# _fpu_control is used on PowerPC, but not available with uClibc
 	depends on !(BR2_powerpc && BR2_TOOLCHAIN_USES_UCLIBC)
+
+comment "lapack/blas needs a toolchain w/ fortran"
+	depends on BR2_PACKAGE_LAPACK_ARCH_SUPPORTS
 	depends on !BR2_TOOLCHAIN_HAS_FORTRAN
 
 config BR2_PACKAGE_LAPACK
 	bool "lapack/blas"
+	depends on BR2_PACKAGE_LAPACK_ARCH_SUPPORTS
 	depends on BR2_TOOLCHAIN_HAS_FORTRAN
 	depends on !BR2_PACKAGE_CLAPACK
-	# _fpu_control is used on PowerPC, but not available with uClibc
-	depends on !(BR2_powerpc && BR2_TOOLCHAIN_USES_UCLIBC)
 	help
 	  LAPACK and BLAS FORTRAN implementation. This package
 	  installs two libraries: libblas and liblapack.
-- 
2.31.1

_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Re: [Buildroot] [PATCH v4 2/3] package/lapack: introduce BR2_PACKAGE_LAPACK_ARCH_SUPPORTS

[Yann E. MORIN]

Arnout, All,

On 2021-07-24 23:45 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
> This makes it easier for packages that depend on lapack to get
> their dependencies correct.
> 
> Since the !uClibc dependency only exists for PowerPC, treat it as
> an architecture dependency.
> 
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> ---
>  package/lapack/Config.in | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/package/lapack/Config.in b/package/lapack/Config.in
> index 6cd0810cb1..ee7aeae7a8 100644
> --- a/package/lapack/Config.in
> +++ b/package/lapack/Config.in
> @@ -1,13 +1,18 @@
> -comment "lapack/blas needs a toolchain w/ fortran"
> +config BR2_PACKAGE_LAPACK_ARCH_SUPPORTS
> +	bool
> +	default y
> +	# _fpu_control is used on PowerPC, but not available with uClibc
>  	depends on !(BR2_powerpc && BR2_TOOLCHAIN_USES_UCLIBC)

Patch 1 in the series states:

  _fpu_control is used on PowerPC, but not available with uClibc or musl

but here, _fpu_control is just not available with uClibc...

I've just checked, and as far as I can see, musl still does not provide
_fpu_control...

This inconsistency pre-exists before your series, but still, this is the
opportunity to fix it, so I've done so when applying...

Applied to master, thanks.

Regards,
Yann E. MORIN.

> +comment "lapack/blas needs a toolchain w/ fortran"
> +	depends on BR2_PACKAGE_LAPACK_ARCH_SUPPORTS
>  	depends on !BR2_TOOLCHAIN_HAS_FORTRAN
>  
>  config BR2_PACKAGE_LAPACK
>  	bool "lapack/blas"
> +	depends on BR2_PACKAGE_LAPACK_ARCH_SUPPORTS
>  	depends on BR2_TOOLCHAIN_HAS_FORTRAN
>  	depends on !BR2_PACKAGE_CLAPACK
> -	# _fpu_control is used on PowerPC, but not available with uClibc
> -	depends on !(BR2_powerpc && BR2_TOOLCHAIN_USES_UCLIBC)
>  	help
>  	  LAPACK and BLAS FORTRAN implementation. This package
>  	  installs two libraries: libblas and liblapack.
> -- 
> 2.31.1
> 
> _______________________________________________
> buildroot mailing list
> buildroot@busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

[Buildroot] [PATCH v4 3/3] package/armadillo: allows to select between clapack, lapack or openblas

[Arnout Vandecappelle (Essensium/Mind)]

From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>

armadillo can use clapack, lapack or openblas as BLAS provider and
clapack or lapack as LAPACK provider.

This patch
- adds hidden variable to check dependencies/requirement for each of them
- adds an option to use openblas as BLAS provider

The choice is required since applications may potentially need
lapack/clapack.

Note that a choice between lapack and clapack is hard to do in Kconfig,
because it inevitably leads to a circular dependency.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
Changes v3 -> v4: [Done by Arnout]
- Split off lapack/clapack arch depends in separate patches
- Simplify the comments (no need for the powerpc complexity)
- Remove the choices because clapack/lapack choice doesn't work. Keep a
  single config for openblas.
Changes v2 -> v3:
- drop all default statements for choice (Thomas)
- add explicit -l since blas libary is called liblas for (c)lapack and
  libopenblas for openblas (Thomas)
- add a choice for lapack selection between lapack, clapack or none
Changes v1 -> v2:
- add openblas as blas provider
---
 package/armadillo/Config.in    | 32 +++++++++++++++++++++++---------
 package/armadillo/armadillo.mk | 28 +++++++++++++++++++++++++++-
 2 files changed, 50 insertions(+), 10 deletions(-)

diff --git a/package/armadillo/Config.in b/package/armadillo/Config.in
index b2b61a3233..710da0314f 100644
--- a/package/armadillo/Config.in
+++ b/package/armadillo/Config.in
@@ -1,20 +1,34 @@
+config BR2_PACKAGE_ARMADILLO_LAPACK_BLAS_SUPPORTS
+	bool
+	default y if BR2_PACKAGE_CLAPACK_ARCH_SUPPORTS
+	default y if BR2_PACKAGE_LAPACK_ARCH_SUPPORTS && BR2_TOOLCHAIN_HAS_FORTRAN
+	default y if BR2_PACKAGE_OPENBLAS_ARCH_SUPPORTS
+
 comment "armadillo needs a toolchain w/ C++"
+	depends on BR2_PACKAGE_ARMADILLO_LAPACK_BLAS_SUPPORTS
 	depends on !BR2_INSTALL_LIBSTDCPP
-	depends on !BR2_powerpc
-	depends on !BR2_m68k_cf
-
-comment "armadillo needs a glibc toolchain w/ C++"
-	depends on BR2_powerpc
-	depends on !BR2_INSTALL_LIBSTDCPP || BR2_TOOLCHAIN_USES_UCLIBC
 
 config BR2_PACKAGE_ARMADILLO
 	bool "armadillo"
+	depends on BR2_PACKAGE_ARMADILLO_LAPACK_BLAS_SUPPORTS
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on !BR2_powerpc || BR2_TOOLCHAIN_USES_GLIBC # clapack
-	depends on !BR2_m68k_cf # clapack
-	select BR2_PACKAGE_CLAPACK
+	select BR2_PACKAGE_CLAPACK if !BR2_PACKAGE_LAPACK && !BR2_PACKAGE_ARMADILLO_BLAS_OPENBLAS
 	help
 	  Armadillo: An Open Source C++ Linear Algebra Library for
 	  Fast Prototyping and Computationally Intensive Experiments.
 
 	  http://arma.sourceforge.net/
+
+if BR2_PACKAGE_ARMADILLO
+
+config BR2_PACKAGE_ARMADILLO_BLAS_OPENBLAS
+	bool "use openblas"
+	depends on BR2_PACKAGE_OPENBLAS_ARCH_SUPPORTS
+	select BR2_PACKAGE_OPENBLAS
+	help
+	  Use OpenBLAS as BLAS library. Without this option, clapack or lapack
+	  will be used.
+
+endchoice
+
+endif
diff --git a/package/armadillo/armadillo.mk b/package/armadillo/armadillo.mk
index 624b842ef6..82df7602be 100644
--- a/package/armadillo/armadillo.mk
+++ b/package/armadillo/armadillo.mk
@@ -7,11 +7,37 @@
 ARMADILLO_VERSION = 9.900.2
 ARMADILLO_SOURCE = armadillo-$(ARMADILLO_VERSION).tar.xz
 ARMADILLO_SITE = https://downloads.sourceforge.net/project/arma
-ARMADILLO_DEPENDENCIES = clapack
 ARMADILLO_INSTALL_STAGING = YES
 ARMADILLO_LICENSE = Apache-2.0
 ARMADILLO_LICENSE_FILES = LICENSE.txt
 
 ARMADILLO_CONF_OPTS = -DDETECT_HDF5=false
 
+# blas support may be provided by lapack, clapack or openblas
+# blas library from (c)lapack is libblas.a, libopenblas.a otherwise
+ARMADILLO_CONF_OPTS += -DBLAS_FOUND=ON
+ifeq ($(BR2_PACKAGE_ARMADILLO_OPENBLAS),y)
+ARMADILLO_CONF_OPTS += -DBLAS_LIBRARIES=-lopenblas
+ARMADILLO_DEPENDENCIES = openblas
+else
+ARMADILLO_CONF_OPTS += -DBLAS_LIBRARIES=-lblas
+ifeq ($(BR2_PACKAGE_CLAPACK), y)
+ARMADILLO_DEPENDENCIES = clapack
+else
+ARMADILLO_DEPENDENCIES = lapack
+endif
+endif
+
+# lapack support may be provided by lapack or clapack
+# but not by openblas
+ifeq ($(BR2_PACKAGE_CLAPACK),y)
+ARMADILLO_CONF_OPTS += -DLAPACK_FOUND=ON
+ARMADILLO_DEPENDENCIES += clapack
+else ifeq ($(BR2_PACKAGE_LAPACK),y)
+ARMADILLO_CONF_OPTS += -DLAPACK_FOUND=ON
+ARMADILLO_DEPENDENCIES += lapack
+else
+ARMADILLO_CONF_OPTS += -DLAPACK_FOUND=OFF
+endif
+
 $(eval $(cmake-package))
-- 
2.31.1

_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Re: [Buildroot] [PATCH v4 3/3] package/armadillo: allows to select between clapack, lapack or openblas

[Yann E. MORIN]

Arnout, All, 

On 2021-07-24 23:45 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
> From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
> 
> armadillo can use clapack, lapack or openblas as BLAS provider and
> clapack or lapack as LAPACK provider.
> 
> This patch
> - adds hidden variable to check dependencies/requirement for each of them
> - adds an option to use openblas as BLAS provider
> 
> The choice is required since applications may potentially need
> lapack/clapack.
> 
> Note that a choice between lapack and clapack is hard to do in Kconfig,
> because it inevitably leads to a circular dependency.
> 
> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> ---
> Changes v3 -> v4: [Done by Arnout]
> - Split off lapack/clapack arch depends in separate patches
> - Simplify the comments (no need for the powerpc complexity)
> - Remove the choices because clapack/lapack choice doesn't work. Keep a
>   single config for openblas.
> Changes v2 -> v3:
> - drop all default statements for choice (Thomas)
> - add explicit -l since blas libary is called liblas for (c)lapack and
>   libopenblas for openblas (Thomas)
> - add a choice for lapack selection between lapack, clapack or none
> Changes v1 -> v2:
> - add openblas as blas provider
> ---
>  package/armadillo/Config.in    | 32 +++++++++++++++++++++++---------
>  package/armadillo/armadillo.mk | 28 +++++++++++++++++++++++++++-
>  2 files changed, 50 insertions(+), 10 deletions(-)
> 
> diff --git a/package/armadillo/Config.in b/package/armadillo/Config.in
> index b2b61a3233..710da0314f 100644
> --- a/package/armadillo/Config.in
> +++ b/package/armadillo/Config.in
> @@ -1,20 +1,34 @@
> +config BR2_PACKAGE_ARMADILLO_LAPACK_BLAS_SUPPORTS
> +	bool
> +	default y if BR2_PACKAGE_CLAPACK_ARCH_SUPPORTS
> +	default y if BR2_PACKAGE_LAPACK_ARCH_SUPPORTS && BR2_TOOLCHAIN_HAS_FORTRAN
> +	default y if BR2_PACKAGE_OPENBLAS_ARCH_SUPPORTS
> +
>  comment "armadillo needs a toolchain w/ C++"
> +	depends on BR2_PACKAGE_ARMADILLO_LAPACK_BLAS_SUPPORTS
>  	depends on !BR2_INSTALL_LIBSTDCPP
> -	depends on !BR2_powerpc
> -	depends on !BR2_m68k_cf
> -
> -comment "armadillo needs a glibc toolchain w/ C++"
> -	depends on BR2_powerpc
> -	depends on !BR2_INSTALL_LIBSTDCPP || BR2_TOOLCHAIN_USES_UCLIBC
>  
>  config BR2_PACKAGE_ARMADILLO
>  	bool "armadillo"
> +	depends on BR2_PACKAGE_ARMADILLO_LAPACK_BLAS_SUPPORTS
>  	depends on BR2_INSTALL_LIBSTDCPP
> -	depends on !BR2_powerpc || BR2_TOOLCHAIN_USES_GLIBC # clapack
> -	depends on !BR2_m68k_cf # clapack
> -	select BR2_PACKAGE_CLAPACK
> +	select BR2_PACKAGE_CLAPACK if !BR2_PACKAGE_LAPACK && !BR2_PACKAGE_ARMADILLO_BLAS_OPENBLAS
>  	help
>  	  Armadillo: An Open Source C++ Linear Algebra Library for
>  	  Fast Prototyping and Computationally Intensive Experiments.
>  
>  	  http://arma.sourceforge.net/
> +
> +if BR2_PACKAGE_ARMADILLO
> +
> +config BR2_PACKAGE_ARMADILLO_BLAS_OPENBLAS

Note the option name here ^^^ [...]

> +	bool "use openblas"
> +	depends on BR2_PACKAGE_OPENBLAS_ARCH_SUPPORTS
> +	select BR2_PACKAGE_OPENBLAS
> +	help
> +	  Use OpenBLAS as BLAS library. Without this option, clapack or lapack
> +	  will be used.
> +
> +endchoice
> +
> +endif
> diff --git a/package/armadillo/armadillo.mk b/package/armadillo/armadillo.mk
> index 624b842ef6..82df7602be 100644
> --- a/package/armadillo/armadillo.mk
> +++ b/package/armadillo/armadillo.mk
> @@ -7,11 +7,37 @@
>  ARMADILLO_VERSION = 9.900.2
>  ARMADILLO_SOURCE = armadillo-$(ARMADILLO_VERSION).tar.xz
>  ARMADILLO_SITE = https://downloads.sourceforge.net/project/arma
> -ARMADILLO_DEPENDENCIES = clapack
>  ARMADILLO_INSTALL_STAGING = YES
>  ARMADILLO_LICENSE = Apache-2.0
>  ARMADILLO_LICENSE_FILES = LICENSE.txt
>  
>  ARMADILLO_CONF_OPTS = -DDETECT_HDF5=false
>  
> +# blas support may be provided by lapack, clapack or openblas
> +# blas library from (c)lapack is libblas.a, libopenblas.a otherwise
> +ARMADILLO_CONF_OPTS += -DBLAS_FOUND=ON
> +ifeq ($(BR2_PACKAGE_ARMADILLO_OPENBLAS),y)

[...] so I guess you meant BR2_PACKAGE_ARMADILLO_BLAS_OPENBLAS here, no?

> +ARMADILLO_CONF_OPTS += -DBLAS_LIBRARIES=-lopenblas
> +ARMADILLO_DEPENDENCIES = openblas
> +else
> +ARMADILLO_CONF_OPTS += -DBLAS_LIBRARIES=-lblas
> +ifeq ($(BR2_PACKAGE_CLAPACK), y)

We don't usually add a space after the comma in an ifeq, especially in
cases like this simple test.

Why duplicate the dependency on lapack/clapack in the !openblas case,
when the same dependencies already exist, below?

I mean: in the !openblas case, we know that either lapack or clapack are
enabled, so we know will hit either case in the block [...]

> +ARMADILLO_DEPENDENCIES = clapack
> +else
> +ARMADILLO_DEPENDENCIES = lapack
> +endif
> +endif

[...] here:

> +# lapack support may be provided by lapack or clapack
> +# but not by openblas
> +ifeq ($(BR2_PACKAGE_CLAPACK),y)
> +ARMADILLO_CONF_OPTS += -DLAPACK_FOUND=ON
> +ARMADILLO_DEPENDENCIES += clapack
> +else ifeq ($(BR2_PACKAGE_LAPACK),y)
> +ARMADILLO_CONF_OPTS += -DLAPACK_FOUND=ON
> +ARMADILLO_DEPENDENCIES += lapack
> +else
> +ARMADILLO_CONF_OPTS += -DLAPACK_FOUND=OFF
> +endif

Additionally, this block will be hit even in the openblas case. Is this
expected?

Regards,
Yann E. MORIN.

>  $(eval $(cmake-package))
> -- 
> 2.31.1
> 
> _______________________________________________
> buildroot mailing list
> buildroot@busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Re: [Buildroot] [PATCH v4 3/3] package/armadillo: allows to select between clapack, lapack or openblas

[Arnout Vandecappelle]

On 25/07/2021 09:57, Yann E. MORIN wrote:
> Arnout, All, 
> 
> On 2021-07-24 23:45 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
>> From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>

[snip]
>> +config BR2_PACKAGE_ARMADILLO_BLAS_OPENBLAS
> 
> Note the option name here ^^^ [...]
> 
>> +	bool "use openblas"
>> +	depends on BR2_PACKAGE_OPENBLAS_ARCH_SUPPORTS
>> +	select BR2_PACKAGE_OPENBLAS
>> +	help
>> +	  Use OpenBLAS as BLAS library. Without this option, clapack or lapack
>> +	  will be used.
>> +
>> +endchoice
>> +
>> +endif
>> diff --git a/package/armadillo/armadillo.mk b/package/armadillo/armadillo.mk
>> index 624b842ef6..82df7602be 100644
>> --- a/package/armadillo/armadillo.mk
>> +++ b/package/armadillo/armadillo.mk
>> @@ -7,11 +7,37 @@
>>  ARMADILLO_VERSION = 9.900.2
>>  ARMADILLO_SOURCE = armadillo-$(ARMADILLO_VERSION).tar.xz
>>  ARMADILLO_SITE = https://downloads.sourceforge.net/project/arma
>> -ARMADILLO_DEPENDENCIES = clapack
>>  ARMADILLO_INSTALL_STAGING = YES
>>  ARMADILLO_LICENSE = Apache-2.0
>>  ARMADILLO_LICENSE_FILES = LICENSE.txt
>>  
>>  ARMADILLO_CONF_OPTS = -DDETECT_HDF5=false
>>  
>> +# blas support may be provided by lapack, clapack or openblas
>> +# blas library from (c)lapack is libblas.a, libopenblas.a otherwise
>> +ARMADILLO_CONF_OPTS += -DBLAS_FOUND=ON
>> +ifeq ($(BR2_PACKAGE_ARMADILLO_OPENBLAS),y)
> 
> [...] so I guess you meant BR2_PACKAGE_ARMADILLO_BLAS_OPENBLAS here, no?

 See, that's why I resent this patch rather than just applying it :-)

 TBH I meant BR2_PACKAGE_ARMADILLO_OPENBLAS in Config.in, but it doesn't matter
much.

> 
>> +ARMADILLO_CONF_OPTS += -DBLAS_LIBRARIES=-lopenblas
>> +ARMADILLO_DEPENDENCIES = openblas
>> +else
>> +ARMADILLO_CONF_OPTS += -DBLAS_LIBRARIES=-lblas
>> +ifeq ($(BR2_PACKAGE_CLAPACK), y)
> 
> We don't usually add a space after the comma in an ifeq, especially in
> cases like this simple test.
> 
> Why duplicate the dependency on lapack/clapack in the !openblas case,
> when the same dependencies already exist, below?
> 
> I mean: in the !openblas case, we know that either lapack or clapack are
> enabled, so we know will hit either case in the block [...]
> 
>> +ARMADILLO_DEPENDENCIES = clapack
>> +else
>> +ARMADILLO_DEPENDENCIES = lapack
>> +endif
>> +endif
> 
> [...] here:
> 
>> +# lapack support may be provided by lapack or clapack
>> +# but not by openblas
>> +ifeq ($(BR2_PACKAGE_CLAPACK),y)
>> +ARMADILLO_CONF_OPTS += -DLAPACK_FOUND=ON
>> +ARMADILLO_DEPENDENCIES += clapack
>> +else ifeq ($(BR2_PACKAGE_LAPACK),y)
>> +ARMADILLO_CONF_OPTS += -DLAPACK_FOUND=ON
>> +ARMADILLO_DEPENDENCIES += lapack
>> +else
>> +ARMADILLO_CONF_OPTS += -DLAPACK_FOUND=OFF
>> +endif
> 
> Additionally, this block will be hit even in the openblas case. Is this
> expected?

 Historical accident. This is reworked from v3 which had an explicit Config.in
option for the lapack choice

 I'll send a v5 which fixes it. I still want Gwenhael to confirm that it's good
in this shape though.

 Regards,
 Arnout

_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Re: [Buildroot] [PATCH v4 3/3] package/armadillo: allows to select between clapack, lapack or openblas

[Arnout Vandecappelle]

On 25/07/2021 11:36, Arnout Vandecappelle wrote:
>  I'll send a v5 which fixes it. I still want Gwenhael to confirm that it's good
> in this shape though.

 There won't be a v5 coming because I can't overcome the circular dependency.

 I think, actually, that we should just drop the clapack package. It's dead (the
lapack maintainers no longer generate clapack based on new lapack releases,
probably because f2c is unmaintained).

 I remember Romain and I were banging our heads against lapack, clapack and
openblas a couple of years ago on a Buildroot developer meeting - I believe it
was in the context of numpy at the time. I don't remember exactly what the
conclusion was, but IIRC there was no good solution at the time either.

 Well, in the end I went ahead and sent a v5 which removes clapack and
re-introduces the choice for BLAS provider. The "choice" for LAPACK provider is
automatic though (it's just yes or no anyway).

 Gwenhael, what do you think?


 Regards,
 Arnout
_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Re: [Buildroot] [PATCH v4 1/3] package/clapack: introduce BR2_PACKAGE_CLAPACK_ARCH_SUPPORTS

[Yann E. MORIN]

Arnout, All,

On 2021-07-24 23:45 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
> This makes it easier for packages that depend on clapack to get
> their dependencies correct.
> 
> Since the glibc dependency only exists for PowerPC, treat it as
> an architecture dependency.
> 
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Applied to master, thanks.

Regards,
Yann E. MORIN.

> ---
>  package/clapack/Config.in | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/package/clapack/Config.in b/package/clapack/Config.in
> index a912eb6c91..98f94b0e60 100644
> --- a/package/clapack/Config.in
> +++ b/package/clapack/Config.in
> @@ -1,14 +1,19 @@
> +config BR2_PACKAGE_CLAPACK_ARCH_SUPPORTS
> +	bool
> +	default y
> +	# assembler: Error: value out of range
> +	depends on !BR2_m68k_cf
> +	# _fpu_control is used on PowerPC, but not available with
> +	# uClibc or musl
> +	depends on !BR2_powerpc || BR2_TOOLCHAIN_USES_GLIBC
> +
>  comment "clapack needs a glibc toolchain"
>  	depends on BR2_powerpc
>  	depends on !BR2_TOOLCHAIN_USES_GLIBC
>  
>  config BR2_PACKAGE_CLAPACK
>  	bool "cblas/clapack"
> -	# _fpu_control is used on PowerPC, but not available with
> -	# uClibc or musl
> -	depends on !BR2_powerpc || BR2_TOOLCHAIN_USES_GLIBC
> -	# assembler: Error: value out of range
> -	depends on !BR2_m68k_cf
> +	depends on BR2_PACKAGE_CLAPACK_ARCH_SUPPORTS
>  	help
>  	  BLAS and LAPACK C implementation (f2c'ed version of).
>  
> -- 
> 2.31.1
> 
> _______________________________________________
> buildroot mailing list
> buildroot@busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot