* [2.6.29-rc5] drm: "possible circular locking dependency" and other issues
@ 2009-02-15 2:14 Steven Noonan
0 siblings, 0 replies; only message in thread
From: Steven Noonan @ 2009-02-15 2:14 UTC (permalink / raw)
To: Linux Kernel Mailing List
First of all, dmesg screamed about a possible circular locking
dependency (see below dmesg). This is specific to 2.6.29-rc* (I didn't
test earlier RCs, but I suppose it doesn't matter much).
Second, I'm getting some strange problems when using X11. While using
X, sometimes things will just completely lock up. I can still SSH to
the machine and reboot it, but I can't do much else with it. I suspect
it's related to the "freeing invalid memtype" or "conflicting memory
types" things in the dmesg. I've seen this problem on 2.6.27.x,
2.6.28.x, and 2.6.29-rc5. It could occur on others, I don't know.
- Steven
[ 0.000000] Linux version 2.6.29-rc5 (root@alcarin) (gcc version
4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #1 SMP PREEMPT Sat Feb 14
13:10:06 PST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 0000000000002000 (usable)
[ 0.000000] BIOS-e820: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] BIOS-e820: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] BIOS-e820: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] BIOS-e820: 0000000000010000 - 0000000000092c00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf07b000 (usable)
[ 0.000000] BIOS-e820: 00000000bf07b000 - 00000000bf27c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bfebe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbf07b max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000100 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf07b000 (usable)
[ 0.000000] modified: 00000000bf07b000 - 00000000bf27c000 (ACPI NVS)
[ 0.000000] modified: 00000000bf27c000 - 00000000bfebe000 (ACPI data)
[ 0.000000] modified: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
[ 0.000000] modified: 00000000bfeef000 - 00000000bff00000 (ACPI data)
[ 0.000000] modified: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT BFEFD1C0, 0074 (r1 APPLE Apple00 A5
1000013)
[ 0.000000] ACPI: FACP BFEFB000, 00F4 (r3 APPLE Apple00 A5
Loki 5F)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match
PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT BFEF0000, 48D1 (r1 APPLE MacBookP 20002
INTL 20050309)
[ 0.000000] ACPI: FACS BFEC0000, 0040
[ 0.000000] ACPI: HPET BFEFA000, 0038 (r1 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: APIC BFEF9000, 0068 (r1 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: MCFG BFEF8000, 003C (r1 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: ASF! BFEF7000, 00A0 (r32 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: SBST BFEF6000, 0030 (r1 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: ECDT BFEF5000, 0053 (r1 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: SSDT BFEEF000, 04DC (r1 APPLE CpuPm 3000
INTL 20050309)
[ 0.000000] ACPI: SSDT BFEBD000, 064F (r1 SataRe SataPri 1000
INTL 20050309)
[ 0.000000] ACPI: SSDT BFEBC000, 069C (r1 SataRe SataSec 1000
INTL 20050309)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2168MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00011000 - 00017f00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 0000bbe670] TEXT DATA BSS ==>
[0000100000 - 0000bbe670]
[ 0.000000] #4 [0000bbf000 - 0000bc3000] INIT_PG_TABLE ==>
[0000bbf000 - 0000bc3000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==>
[0000010000 - 0000011000]
[ 0.000000] #7 [0000011000 - 0000018000] BOOTMAP ==>
[0000011000 - 0000018000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bf07b
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x000bf07b
[ 0.000000] On node 0 totalpages: 782335
[ 0.000000] free_area_init_node: node 0, pgdat c0731700,
node_mem_map c1000034
[ 0.000000] DMA zone: 52 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] Normal zone: 2834 pages used for memmap
[ 0.000000] Normal zone: 220396 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7048 pages used for memmap
[ 0.000000] HighMem zone: 548085 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap:
c0000000:30000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 36864 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 772401
[ 0.000000] Kernel command line: root=/dev/sda5
video=uvesafb:1440x900-32,mtrr:3,ywrap,nocrtc nmi_watchdog=1
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2327.618 MHz processor.
[ 0.000999] Console: colour dummy device 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000999] ... MAX_LOCK_DEPTH: 48
[ 0.000999] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000999] ... CLASSHASH_SIZE: 4096
[ 0.000999] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.000999] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.000999] ... CHAINHASH_SIZE: 8192
[ 0.000999] memory used by lock dependency info: 2335 kB
[ 0.000999] per task-struct memory footprint: 1152 bytes
[ 0.000999] ------------------------
[ 0.000999] | Locking API testsuite:
[ 0.000999] ----------------------------------------------------------------------------
[ 0.000999] | spin |wlock |rlock
|mutex | wsem | rsem |
[ 0.000999]
--------------------------------------------------------------------------
[ 0.000999] A-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000999] A-B-B-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000999] A-B-B-C-C-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000999] A-B-C-A-B-C deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000999] A-B-B-C-C-D-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000999] A-B-C-D-B-D-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000999] A-B-C-D-B-C-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[ 0.000999] double unlock: ok | ok | ok |
ok | ok | ok |
[ 0.000999] initialize held: ok | ok | ok |
ok | ok | ok |
[ 0.000999] bad unlock order: ok | ok | ok |
ok | ok | ok |
[ 0.000999]
--------------------------------------------------------------------------
[ 0.000999] recursive read-lock: | ok |
| ok |
[ 0.000999] recursive read-lock #2: | ok |
| ok |
[ 0.000999] mixed read-write-lock: | ok |
| ok |
[ 0.000999] mixed write-read-lock: | ok |
| ok |
[ 0.000999]
--------------------------------------------------------------------------
[ 0.000999] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000999] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000999] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000999] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000999] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000999] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000999] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000999] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000999] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000999] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000999] hard-irq read-recursion/123: ok |
[ 0.000999] soft-irq read-recursion/123: ok |
[ 0.000999] hard-irq read-recursion/132: ok |
[ 0.000999] soft-irq read-recursion/132: ok |
[ 0.000999] hard-irq read-recursion/213: ok |
[ 0.000999] soft-irq read-recursion/213: ok |
[ 0.000999] hard-irq read-recursion/231: ok |
[ 0.000999] soft-irq read-recursion/231: ok |
[ 0.000999] hard-irq read-recursion/312: ok |
[ 0.000999] soft-irq read-recursion/312: ok |
[ 0.000999] hard-irq read-recursion/321: ok |
[ 0.000999] soft-irq read-recursion/321: ok |
[ 0.000999] -------------------------------------------------------
[ 0.000999] Good, all 218 testcases passed! |
[ 0.000999] ---------------------------------
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Memory: 3076652k/3129836k available (4427k kernel code,
51880k reserved, 2002k data, 332k init, 2220532k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfff85000 - 0xfffff000 ( 488 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000999] .init : 0xc074f000 - 0xc07a2000 ( 332 kB)
[ 0.000999] .data : 0xc0552c43 - 0xc0747830 (2002 kB)
[ 0.000999] .text : 0xc0100000 - 0xc0552c43 (4427 kB)
[ 0.000999] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001033] Calibrating delay loop (skipped), value calculated
using timer frequency.. 4655.23 BogoMIPS (lpj=2327618)
[ 0.001134] Mount-cache hash table entries: 512
[ 0.002562] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002578] CPU: L2 cache: 4096K
[ 0.002590] [ds] using Core 2/Atom configuration
[ 0.002603] CPU: Physical Processor ID: 0
[ 0.002613] CPU: Processor Core ID: 0
[ 0.002628] Intel machine check architecture supported.
[ 0.002644] Intel machine check reporting enabled on CPU#0.
[ 0.002657] using mwait in idle threads.
[ 0.002681] Checking 'hlt' instruction... OK.
[ 0.006750] ACPI: Core revision 20081204
[ 0.025993] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.036041] CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
[ 0.036994] APIC timer registered as dummy, due to nmi_watchdog=1!
[ 0.039087] Testing tracer nop: PASSED
[ 0.039484] lockdep: fixing up alternatives.
[ 0.039644] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine..
4655.05 BogoMIPS (lpj=2327527)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 4096K
[ 0.000999] [ds] using Core 2/Atom configuration
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] Intel machine check architecture supported.
[ 0.000999] Intel machine check reporting enabled on CPU#1.
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7010600070106, new 0x7010600070106
[ 0.114028] CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
[ 0.114145] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.115097] Brought up 2 CPUs
[ 0.115110] Total of 2 processors activated (9310.29 BogoMIPS).
[ 0.115199] Testing NMI watchdog ... OK.
[ 0.135477] CPU0 attaching sched-domain:
[ 0.135484] domain 0: span 0-1 level MC
[ 0.135490] groups: 0 1
[ 0.135526] CPU1 attaching sched-domain:
[ 0.135531] domain 0: span 0-1 level MC
[ 0.135538] groups: 1 0
[ 0.137296] net_namespace: 1112 bytes
[ 0.138307] NET: Registered protocol family 16
[ 0.140163] ACPI: bus type pci registered
[ 0.140223] dca service started, version 1.8
[ 0.141053] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.141074] PCI: MCFG area at f0000000 reserved in E820
[ 0.141087] PCI: updated MCFG configuration 0: base f0000000
segment 0 buses 0 - 63
[ 0.141106] PCI: Using MMCONFIG for extended config space
[ 0.141119] PCI: Using configuration type 1 for base access
[ 0.156099] bio: create slab <bio-0> at 0
[ 0.162157] ACPI: EC: EC description table is found, configuring boot EC
[ 0.162644] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 0.172300] ACPI: BIOS _OSI(Linux) query ignored
[ 0.173883] ACPI: Interpreter enabled
[ 0.173903] ACPI: (supports S0 S3 S4 S5)
[ 0.174025] ACPI: Using IOAPIC for interrupt routing
[ 0.210480] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.210498] ACPI: EC: driver started in interrupt mode
[ 0.211484] ACPI: No dock devices found.
[ 0.212143] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.212342] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.212363] pci 0000:00:01.0: PME# disabled
[ 0.212455] pci 0000:00:07.0: reg 10 32bit mmio: [0xd8404000-0xd8404fff]
[ 0.213122] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd8400000-0xd8403fff]
[ 0.213247] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.213268] pci 0000:00:1b.0: PME# disabled
[ 0.213444] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.213465] pci 0000:00:1c.0: PME# disabled
[ 0.213646] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.213666] pci 0000:00:1c.1: PME# disabled
[ 0.213847] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.213868] pci 0000:00:1c.2: PME# disabled
[ 0.214019] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f]
[ 0.214149] pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f]
[ 0.214282] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f]
[ 0.214411] pci 0000:00:1d.3: reg 20 io port: [0x4020-0x403f]
[ 0.214546] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd8405400-0xd84057ff]
[ 0.214673] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.214695] pci 0000:00:1d.7: PME# disabled
[ 0.215031] pci 0000:00:1f.0: quirk: region 0400-047f claimed by
ICH6 ACPI/GPIO/TCO
[ 0.215055] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.215074] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0680 (mask 000f)
[ 0.215096] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at
1640 (mask 000f)
[ 0.215121] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at
0300 (mask 001f)
[ 0.215229] pci 0000:00:1f.1: reg 10 io port: [0x40d8-0x40df]
[ 0.215247] pci 0000:00:1f.1: reg 14 io port: [0x40ec-0x40ef]
[ 0.215263] pci 0000:00:1f.1: reg 18 io port: [0x40d0-0x40d7]
[ 0.215280] pci 0000:00:1f.1: reg 1c io port: [0x40e8-0x40eb]
[ 0.215297] pci 0000:00:1f.1: reg 20 io port: [0x40b0-0x40bf]
[ 0.215409] pci 0000:00:1f.2: reg 10 io port: [0x40c8-0x40cf]
[ 0.215426] pci 0000:00:1f.2: reg 14 io port: [0x40e4-0x40e7]
[ 0.215443] pci 0000:00:1f.2: reg 18 io port: [0x40c0-0x40c7]
[ 0.215460] pci 0000:00:1f.2: reg 1c io port: [0x40e0-0x40e3]
[ 0.215476] pci 0000:00:1f.2: reg 20 io port: [0x40a0-0x40af]
[ 0.215493] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd8405000-0xd84053ff]
[ 0.215555] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.215574] pci 0000:00:1f.2: PME# disabled
[ 0.215692] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
[ 0.215875] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
[ 0.215901] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.215927] pci 0000:01:00.0: reg 18 32bit mmio: [0xd8300000-0xd830ffff]
[ 0.216029] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 0.216132] pci 0000:01:00.0: supports D1 D2
[ 0.216274] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.216285] pci 0000:00:01.0: bridge 32bit mmio: [0xd8300000-0xd83fffff]
[ 0.216299] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.216437] pci 0000:02:00.0: reg 10 64bit mmio: [0xd8200000-0xd8203fff]
[ 0.216456] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff]
[ 0.216517] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 0.216612] pci 0000:02:00.0: supports D1 D2
[ 0.216617] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.216639] pci 0000:02:00.0: PME# disabled
[ 0.216767] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.216779] pci 0000:00:1c.0: bridge 32bit mmio: [0xd8200000-0xd82fffff]
[ 0.216796] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd8500000-0xd85fffff]
[ 0.216919] pci 0000:03:00.0: reg 10 64bit mmio: [0xd8100000-0xd810ffff]
[ 0.217093] pci 0000:03:00.0: supports D1
[ 0.217098] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.217119] pci 0000:03:00.0: PME# disabled
[ 0.217271] pci 0000:00:1c.1: bridge 32bit mmio: [0xd8100000-0xd81fffff]
[ 0.217401] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff]
[ 0.217413] pci 0000:00:1c.2: bridge 32bit mmio: [0xd4100000-0xd80fffff]
[ 0.217430] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xd0000000-0xd3ffffff]
[ 0.217535] pci 0000:0c:03.0: reg 10 32bit mmio: [0xd4004000-0xd40047ff]
[ 0.217553] pci 0000:0c:03.0: reg 14 32bit mmio: [0xd4000000-0xd4003fff]
[ 0.217669] pci 0000:0c:03.0: supports D1 D2
[ 0.217674] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.217695] pci 0000:0c:03.0: PME# disabled
[ 0.217808] pci 0000:00:1e.0: transparent bridge
[ 0.217832] pci 0000:00:1e.0: bridge 32bit mmio: [0xd4000000-0xd40fffff]
[ 0.217906] pci_bus 0000:00: on NUMA node 0
[ 0.217925] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.218670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.218943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.219225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.219485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.219788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.252407] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.252795] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
14 15) *0, disabled.
[ 0.253332] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.253718] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12
14 15) *0, disabled.
[ 0.254122] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.254502] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *0, disabled.
[ 0.254880] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.255282] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12
14 15) *0, disabled.
[ 0.257161] SCSI subsystem initialized
[ 0.257161] libata version 3.00 loaded.
[ 0.258038] usbcore: registered new interface driver usbfs
[ 0.258052] usbcore: registered new interface driver hub
[ 0.258191] usbcore: registered new device driver usb
[ 0.259714] PCI: Using ACPI for IRQ routing
[ 0.262982] Bluetooth: Core ver 2.14
[ 0.263030] NET: Registered protocol family 31
[ 0.263034] Bluetooth: HCI device and connection manager initialized
[ 0.263083] Bluetooth: HCI socket layer initialized
[ 0.265058] cfg80211: Calling CRDA to update world regulatory domain
[ 0.265077] cfg80211: calling CRDA failed - unable to update world
regulatory domain, using static definition
[ 0.265077] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.265077] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.269985] pnp: PnP ACPI init
[ 0.270044] ACPI: bus type pnp registered
[ 0.276429] pnp 00:07: io resource (0x1640-0x164f) overlaps
0000:00:1c.2 BAR 7 (0x1000-0x1fff), disabling
[ 0.281942] pnp: PnP ACPI: found 9 devices
[ 0.281974] ACPI: ACPI bus type pnp unregistered
[ 0.282015] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.282034] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.282052] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.282070] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.282087] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.282105] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.282143] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.282177] system 00:07: ioport range 0x680-0x6ef has been reserved
[ 0.282194] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.282210] system 00:07: ioport range 0x810-0x817 has been reserved
[ 0.282234] system 00:07: ioport range 0x400-0x47f has been reserved
[ 0.282251] system 00:07: ioport range 0x500-0x53f has been reserved
[ 0.318820] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.318840] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.318861] pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
[ 0.318881] pci 0000:00:01.0: PREFETCH window:
0x000000c0000000-0x000000cfffffff
[ 0.318911] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.318929] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.318968] pci 0000:00:1c.0: MEM window: 0xd8200000-0xd82fffff
[ 0.318989] pci 0000:00:1c.0: PREFETCH window:
0x000000d8500000-0x000000d85fffff
[ 0.319019] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.319034] pci 0000:00:1c.1: IO window: disabled
[ 0.319055] pci 0000:00:1c.1: MEM window: 0xd8100000-0xd81fffff
[ 0.319075] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.319100] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.319118] pci 0000:00:1c.2: IO window: 0x1000-0x1fff
[ 0.319140] pci 0000:00:1c.2: MEM window: 0xd4100000-0xd80fffff
[ 0.319160] pci 0000:00:1c.2: PREFETCH window:
0x000000d0000000-0x000000d3ffffff
[ 0.319191] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
[ 0.319205] pci 0000:00:1e.0: IO window: disabled
[ 0.319226] pci 0000:00:1e.0: MEM window: 0xd4000000-0xd40fffff
[ 0.319246] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.319298] alloc irq_desc for 16 on cpu 0 node 0
[ 0.319305] alloc kstat_irqs on cpu 0 node 0
[ 0.319318] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.319340] pci 0000:00:01.0: setting latency timer to 64
[ 0.319360] alloc irq_desc for 17 on cpu 0 node 0
[ 0.319366] alloc kstat_irqs on cpu 0 node 0
[ 0.319376] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.319398] pci 0000:00:1c.0: setting latency timer to 64
[ 0.319418] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.319439] pci 0000:00:1c.1: setting latency timer to 64
[ 0.319460] alloc irq_desc for 18 on cpu 0 node 0
[ 0.319465] alloc kstat_irqs on cpu 0 node 0
[ 0.319475] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.319497] pci 0000:00:1c.2: setting latency timer to 64
[ 0.320381] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.320408] pci 0000:00:1e.0: setting latency timer to 64
[ 0.320418] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.320425] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.320431] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.320437] pci_bus 0000:01: resource 1 mem: [0xd8300000-0xd83fffff]
[ 0.320443] pci_bus 0000:01: resource 2 mem: [0xc0000000-0xcfffffff]
[ 0.320448] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.320454] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.320460] pci_bus 0000:02: resource 1 mem: [0xd8200000-0xd82fffff]
[ 0.320465] pci_bus 0000:02: resource 2 mem: [0xd8500000-0xd85fffff]
[ 0.320471] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.320476] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 0.320482] pci_bus 0000:03: resource 1 mem: [0xd8100000-0xd81fffff]
[ 0.320487] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[ 0.320493] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.320498] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.320504] pci_bus 0000:04: resource 1 mem: [0xd4100000-0xd80fffff]
[ 0.320510] pci_bus 0000:04: resource 2 mem: [0xd0000000-0xd3ffffff]
[ 0.320515] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.320520] pci_bus 0000:0c: resource 0 mem: [0x0-0x0]
[ 0.320526] pci_bus 0000:0c: resource 1 mem: [0xd4000000-0xd40fffff]
[ 0.320532] pci_bus 0000:0c: resource 2 mem: [0x0-0x0]
[ 0.320537] pci_bus 0000:0c: resource 3 io: [0x00-0xffff]
[ 0.320543] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffff]
[ 0.320660] NET: Registered protocol family 2
[ 0.327248] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.328622] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.329395] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.344036] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.344090] TCP reno registered
[ 0.346192] NET: Registered protocol family 1
[ 0.352026] Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.352048] Scanning for low memory corruption every 60 seconds
[ 0.353627] Testing tracer sched_switch: PASSED
[ 0.454099] Testing tracer sysprof: <6>Clockevents: could not
switch to one-shot mode:<6>Clockevents: could not switch to one-shot
mode: lapic is not functional.
[ 0.500960] Could not switch to high resolution mode on CPU 1
[ 0.500986] lapic is not functional.
[ 0.500997] Could not switch to high resolution mode on CPU 0
[ 0.554969] PASSED
[ 0.554986] Testing tracer function: PASSED
[ 0.673239] Testing tracer irqsoff: PASSED
[ 0.673472] Testing tracer preemptoff: PASSED
[ 0.673637] Testing tracer preemptirqsoff: PASSED
[ 0.673981] Testing tracer wakeup: PASSED
[ 0.977612] highmem bounce pool size: 64 pages
[ 0.977636] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.989752] DLM (built Feb 14 2009 13:03:37) installed
[ 0.994623] NTFS driver 2.1.29 [Flags: R/O].
[ 0.995991] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1.003612] SGI XFS with ACLs, security attributes, no debug enabled
[ 1.005802] msgmni has been set to 1673
[ 1.006617] alg: No test for cipher_null (cipher_null-generic)
[ 1.006813] alg: No test for digest_null (digest_null-generic)
[ 1.006907] alg: No test for compress_null (compress_null-generic)
[ 1.009754] alg: No test for fcrypt (fcrypt-generic)
[ 1.014296] alg: No test for stdrng (krng)
[ 1.014380] alg: No test for stdrng (ansi_cprng)
[ 1.014461] io scheduler noop registered
[ 1.014474] io scheduler anticipatory registered
[ 1.014487] io scheduler deadline registered
[ 1.014541] io scheduler cfq registered (default)
[ 1.014834] pci 0000:01:00.0: Boot video device
[ 1.015352] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.015540] alloc irq_desc for 24 on cpu 0 node 0
[ 1.015547] alloc kstat_irqs on cpu 0 node 0
[ 1.015565] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.016031] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.016179] alloc irq_desc for 25 on cpu 0 node 0
[ 1.016185] alloc kstat_irqs on cpu 0 node 0
[ 1.016202] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.016838] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.017000] alloc irq_desc for 26 on cpu 0 node 0
[ 1.017006] alloc kstat_irqs on cpu 0 node 0
[ 1.017023] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 1.017646] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.017796] alloc irq_desc for 27 on cpu 0 node 0
[ 1.017802] alloc kstat_irqs on cpu 0 node 0
[ 1.017819] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 1.021718] uvesafb: (C) 1988-2005, ATI Technologies Inc. , M56P,
01.00, OEM: ATI ATOMBIOS, VBE v3.0
[ 1.230709] uvesafb: protected mode interface info at c000:ad0c
[ 1.230726] uvesafb: pmi: set display start = c00cad94, set palette
= c00cae50
[ 2.163707] uvesafb: VBIOS/hardware supports DDC2 transfers
[ 3.099727] uvesafb: monitor limits: vf = 60 Hz, hf = 55 kHz, clk = 96 MHz
[ 3.100030] uvesafb: scrolling: ywrap using protected mode
interface, yres_virtual=1728
[ 3.246185] Console: switching to colour frame buffer device 144x54
[ 3.255731] uvesafb: framebuffer at 0xc0000000, mapped to
0xf8580000, using 7776k, total 16384k
[ 3.255896] fb0: VESA VGA frame buffer device
[ 3.256590] ACPI: AC Adapter [ADP1] (on-line)
[ 3.388802] ACPI: Battery Slot [BAT0] (battery present)
[ 3.389741] input: Power Button (FF) as /class/input/input0
[ 3.389965] ACPI: Power Button (FF) [PWRF]
[ 3.390511] input: Lid Switch as /class/input/input1
[ 3.391114] ACPI: Lid Switch [LID0]
[ 3.391717] input: Power Button (CM) as /class/input/input2
[ 3.391878] ACPI: Power Button (CM) [PWRB]
[ 3.392319] input: Sleep Button (CM) as /class/input/input3
[ 3.392427] ACPI: Sleep Button (CM) [SLPB]
[ 3.394749] ACPI: SSDT BFEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000
INTL 20050309)
[ 3.396641] ACPI: SSDT BFEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001
INTL 20050309)
[ 3.398604] Monitor-Mwait will be used to enter C-1 state
[ 3.398789] Monitor-Mwait will be used to enter C-2 state
[ 3.398819] Monitor-Mwait will be used to enter C-3 state
[ 3.399303] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.399862] processor ACPI_CPU:00: registered as cooling_device0
[ 3.400020] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.401303] ACPI: SSDT BFEB7F10, 0087 (r1 APPLE Cpu1Ist 3000
INTL 20050309)
[ 3.403151] ACPI: SSDT BFEB6F10, 0085 (r1 APPLE Cpu1Cst 3000
INTL 20050309)
[ 3.405545] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.406120] processor ACPI_CPU:01: registered as cooling_device1
[ 3.406275] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.540792] Non-volatile memory driver v1.3
[ 3.541451] intel_rng: FWH not detected
[ 3.545481] Linux agpgart interface v0.103
[ 3.549516] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180
seconds, margin is 60 seconds).
[ 3.553472] Hangcheck: Using get_cycles().
[ 3.560504] loop: module loaded
[ 3.564450] Uniform Multi-Platform E-IDE driver
[ 3.568553] ide-cd driver 5.00
[ 3.572894] Driver 'sd' needs updating - please use bus_type methods
[ 3.576943] Driver 'sr' needs updating - please use bus_type methods
[ 3.581368] ata_piix 0000:00:1f.1: version 2.12
[ 3.581515] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 3.585440] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.589496] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.589700] scsi0 : ata_piix
[ 3.594160] scsi1 : ata_piix
[ 3.600249] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[ 3.604250] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[ 3.778192] ata1.00: ATAPI: HL-DT-ST DVDRW GWA4080MA, AE39, max UDMA/33
[ 3.788098] ata1.00: configured for UDMA/33
[ 3.797494] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRW
GWA4080MA AE39 PQ: 0 ANSI: 5
[ 3.812709] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 3.816657] Uniform CD-ROM driver Revision: 3.20
[ 3.821508] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.822747] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 3.989243] alloc irq_desc for 19 on cpu 0 node 0
[ 3.989250] alloc kstat_irqs on cpu 0 node 0
[ 3.989264] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.993197] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 3.997209] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.997348] scsi2 : ata_piix
[ 4.001444] scsi3 : ata_piix
[ 4.008594] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[ 4.012369] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[ 4.181204] ata3.01: ATA-7: ST9200420AS, 3.AAA, max UDMA/133
[ 4.184853] ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.195235] ata3.01: configured for UDMA/133
[ 4.199191] scsi 2:0:1:0: Direct-Access ATA ST9200420AS
3.AA PQ: 0 ANSI: 5
[ 4.203771] sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors:
(200 GB/186 GiB)
[ 4.207685] sd 2:0:1:0: [sda] Write Protect is off
[ 4.211533] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.211637] sd 2:0:1:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.216331] sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors:
(200 GB/186 GiB)
[ 4.220294] sd 2:0:1:0: [sda] Write Protect is off
[ 4.224135] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.224240] sd 2:0:1:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.228163] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
sda10 sda11 sda12
[ 4.304552] sd 2:0:1:0: [sda] Attached SCSI disk
[ 4.308960] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 4.476014] PNP: No PS/2 controller found. Probing ports directly.
[ 4.480928] i8042.c: No controller found.
[ 4.485193] mice: PS/2 mouse device common for all mice
[ 4.497303] I2O subsystem v1.325
[ 4.501278] i2o: max drivers = 8
[ 4.505847] I2O Configuration OSM v1.323
[ 4.510037] I2O Bus Adapter OSM v1.317
[ 4.513972] I2O Block Device OSM v1.325
[ 4.518214] I2O SCSI Peripheral OSM v1.316
[ 4.522103] I2O ProcFS OSM v1.316
[ 4.526086] rtc_cmos 00:08: RTC can wake from S4
[ 4.530201] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 4.533997] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 4.537905] i2c /dev entries driver
[ 4.541946] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level,
low) -> IRQ 19
[ 4.545810] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf]
conflicts with ACPI region SMBI [0xefa0-0xefaf]
[ 4.549760] ACPI: Device needs an ACPI driver
[ 4.554974] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
[ 4.559361] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device
(Version=2, TCOBASE=0x0460)
[ 4.563663] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.568983] cpuidle: using governor ladder
[ 4.569963] Marking TSC unstable due to TSC halts in idle
[ 4.577694] Clockevents: could not switch to one-shot
mode:<6>Clockevents: could not switch to one-shot mode: lapic is not
functional.
[ 4.577708] Could not switch to high resolution mode on CPU 1
[ 4.578688] lapic is not functional.
[ 4.590364] Could not switch to high resolution mode on CPU 0
[ 4.596352] cpuidle: using governor menu
[ 4.600706] sdhci: Secure Digital Host Controller Interface driver
[ 4.604896] sdhci: Copyright(c) Pierre Ossman
[ 4.610016] Netfilter messages via NETLINK v0.30.
[ 4.614262] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.619328] CONFIG_NF_CT_ACCT is deprecated and will be removed
soon. Please use
[ 4.623599] nf_conntrack.acct=1 kernel paramater, acct=1
nf_conntrack module option or
[ 4.628016] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 4.632663] ctnetlink v0.93: registering with nfnetlink.
[ 4.637105] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 4.641499] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 4.646101] xt_time: kernel timezone is -0000
[ 4.653448] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.658001] ClusterIP Version 0.8 loaded successfully
[ 4.662413] arp_tables: (C) 2002 David S. Miller
[ 4.666783] TCP cubic registered
[ 4.670987] Initializing XFRM netlink socket
[ 4.676449] NET: Registered protocol family 10
[ 4.684983] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.689460] IPv6 over IPv4 tunneling driver
[ 4.696783] NET: Registered protocol family 17
[ 4.700903] NET: Registered protocol family 15
[ 4.732245] SCTP: Hash tables configured (established 65536 bind 65536)
[ 4.741078] lib80211: common routines for IEEE802.11 drivers
[ 4.745138] lib80211_crypt: registered algorithm 'NULL'
[ 4.748515] Using IPI No-Shortcut mode
[ 4.753778] rtc_cmos 00:08: setting system clock to 2009-02-15
02:03:19 UTC (1234663399)
[ 4.809312] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.813587] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 4.818231] Freeing unused kernel memory: 332k freed
[ 4.822490] kjournald starting. Commit interval 5 seconds
[ 4.827486] Write protecting the kernel text: 4428k
[ 4.832060] Write protecting the kernel read-only data: 1696k
[ 6.923287] applesmc: Apple MacBook Pro detected:
[ 6.923292] applesmc: - Model with accelerometer
[ 6.923295] applesmc: - Model with light sensors and backlight
[ 6.923299] applesmc: - Model with 12 temperature sensors
[ 6.924083] applesmc: device has already been initialized (0xe0, 0xf8).
[ 6.924088] applesmc: device successfully initialized.
[ 6.924923] applesmc: 2 fans found.
[ 6.926459] input: applesmc as /class/input/input4
[ 6.928454] Registered led device: smc::kbd_backlight
[ 6.928600] applesmc: driver successfully loaded.
[ 7.675055] ath9k: 0.1
[ 7.675121] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.675137] ath9k 0000:03:00.0: setting latency timer to 64
[ 7.813377] wmaster0 (ath9k): not using net_device_ops yet
[ 7.815456] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 7.818705] wlan0 (ath9k): not using net_device_ops yet
[ 7.821035] Registered led device: ath9k-phy0:radio
[ 7.821081] Registered led device: ath9k-phy0:assoc
[ 7.821123] Registered led device: ath9k-phy0:tx
[ 7.821165] Registered led device: ath9k-phy0:rx
[ 7.821198] phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81:
mem=0xf9040000, irq=17
[ 7.861589] sky2 driver version 1.22
[ 7.861684] sky2 0000:02:00.0: enabling device (0000 -> 0003)
[ 7.861694] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.861712] sky2 0000:02:00.0: setting latency timer to 64
[ 7.861772] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[ 7.894000] sky2 0000:02:00.0: Marvell Yukon 88E8053 Gigabit
Ethernet Controller
[ 7.894004] Part Number: Yukon 88E8053
[ 7.894007] Engineering Level: Rev. 2.2
[ 7.894010] Manufacturer: Marvell
[ 7.894090] alloc irq_desc for 28 on cpu 0 node 0
[ 7.894094] alloc kstat_irqs on cpu 0 node 0
[ 7.894109] sky2 0000:02:00.0: irq 28 for MSI/MSI-X
[ 7.894461] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.894522] alloc irq_desc for 23 on cpu 0 node 0
[ 7.894526] alloc kstat_irqs on cpu 0 node 0
[ 7.894534] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.894563] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.894568] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.895456] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 7.899383] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.899393] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 7.899423] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400
[ 7.905871] sky2 eth0: addr 00:17:f2:df:a4:2e
[ 7.908672] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.909199] usb usb1: configuration #1 chosen from 1 choice
[ 7.909440] hub 1-0:1.0: USB hub found
[ 7.909522] hub 1-0:1.0: 8 ports detected
[ 8.049913] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.050010] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.050024] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.050030] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.050115] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 8.050167] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 8.050467] usb usb2: configuration #1 chosen from 1 choice
[ 8.050539] hub 2-0:1.0: USB hub found
[ 8.050631] hub 2-0:1.0: 2 ports detected
[ 8.050914] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.050927] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8.050933] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.051037] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 8.051100] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 8.051291] usb usb3: configuration #1 chosen from 1 choice
[ 8.051365] hub 3-0:1.0: USB hub found
[ 8.051378] hub 3-0:1.0: 2 ports detected
[ 8.051595] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.051607] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8.051612] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.051698] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 8.051758] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 8.052007] usb usb4: configuration #1 chosen from 1 choice
[ 8.052077] hub 4-0:1.0: USB hub found
[ 8.052089] hub 4-0:1.0: 2 ports detected
[ 8.052308] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 8.052318] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 8.052324] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 8.052379] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 8.052433] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 8.052621] usb usb5: configuration #1 chosen from 1 choice
[ 8.052706] hub 5-0:1.0: USB hub found
[ 8.052719] hub 5-0:1.0: 2 ports detected
[ 8.076789] ohci1394 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8.125036] alloc irq_desc for 22 on cpu 0 node 0
[ 8.125040] alloc kstat_irqs on cpu 0 node 0
[ 8.125049] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 8.125151] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.128752] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[d4004000-d40047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 8.159902] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 8.188672] input: HDA Intel at 0xd8400000 irq 22 Line In at Ext
Rear Jack as /class/input/input5
[ 8.189931] input: HDA Intel at 0xd8400000 irq 22 HP Out at Ext
Rear Jack as /class/input/input6
[ 8.313667] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 8.428714] usb 1-4: configuration #1 chosen from 1 choice
[ 8.563671] EXT3 FS on sda5, internal journal
[ 8.838664] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 9.018687] usb 2-2: configuration #1 chosen from 1 choice
[ 9.117551] usbcore: registered new interface driver hiddev
[ 9.118066] usbcore: registered new interface driver usbhid
[ 9.118076] usbhid: v2.6:USB HID core driver
[ 9.162238] appletouch: Geyser mode initialized.
[ 9.162433] input: appletouch as /class/input/input7
[ 9.168827] usbcore: registered new interface driver appletouch
[ 9.235673] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 9.306533] input: Apple Computer Apple Internal Keyboard /
Trackpad as /class/input/input8
[ 9.318358] apple 0003:05AC:021A.0001: input: USB HID v1.11
Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on
usb-0000:00:1d.0-2/input0
[ 9.322424] input: Apple Computer Apple Internal Keyboard /
Trackpad as /class/input/input9
[ 9.325769] apple 0003:05AC:021A.0002: input: USB HID v1.11 Device
[Apple Computer Apple Internal Keyboard / Trackpad] on
usb-0000:00:1d.0-2/input2
[ 9.394269] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe9de076]
[ 9.408112] usb 4-2: configuration #1 chosen from 1 choice
[ 9.419555] generic-usb 0003:05AC:8240.0003: hiddev96: USB HID
v1.11 Device [Apple Computer, Inc. IR Receiver] on
usb-0000:00:1d.2-2/input0
[ 9.625669] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 9.798649] usb 5-1: configuration #1 chosen from 1 choice
[ 9.823955] input: HID 05ac:1000 as /class/input/input10
[ 9.833524] generic-usb 0003:05AC:1000.0004: input: USB HID v1.11
Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[ 9.852082] input: HID 05ac:1000 as /class/input/input11
[ 9.862027] generic-usb 0003:05AC:1000.0005: input: USB HID v1.11
Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
[ 10.777858] tun: Universal TUN/TAP device driver, 1.6
[ 10.777865] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 14.748644] kjournald starting. Commit interval 5 seconds
[ 14.749897] EXT3 FS on sda6, internal journal
[ 14.749917] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.785433] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 14.785518] ReiserFS: sda7: using ordered data mode
[ 14.795127] ReiserFS: sda7: journal params: device sda7, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 14.795647] ReiserFS: sda7: checking transaction log (sda7)
[ 14.828605] ReiserFS: sda7: Using r5 hash to sort names
[ 14.895392] ReiserFS: sda8: found reiserfs format "3.6" with standard journal
[ 14.895421] ReiserFS: sda8: using ordered data mode
[ 14.895924] ReiserFS: sda8: journal params: device sda8, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 14.896481] ReiserFS: sda8: checking transaction log (sda8)
[ 14.915927] ReiserFS: sda8: Using r5 hash to sort names
[ 14.949604] kjournald starting. Commit interval 5 seconds
[ 14.950823] EXT3 FS on sda9, internal journal
[ 14.950843] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.991786] kjournald starting. Commit interval 5 seconds
[ 14.993859] EXT3 FS on sda12, internal journal
[ 14.993879] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.214143] Adding 2096472k swap on /dev/sda11. Priority:-1
extents:1 across:2096472k
[ 29.989135] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.021686] sky2 eth0: enabling interface
[ 32.022058] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.518308] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow
control both
[ 34.519069] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 53.488109] eth0: no IPv6 routers present
[ 81.063386] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 81.137468] [drm] Initialized drm 1.1.0 20060810
[ 81.155545] pci 0000:01:00.0: setting latency timer to 64
[ 81.158454] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 81.574632]
[ 81.574635] =======================================================
[ 81.574643] [ INFO: possible circular locking dependency detected ]
[ 81.574650] 2.6.29-rc5 #1
[ 81.574654] -------------------------------------------------------
[ 81.574660] X/5165 is trying to acquire lock:
[ 81.574665] (&dev->struct_mutex){--..}, at: [<f8da46a6>]
drm_mmap+0x2a/0x44 [drm]
[ 81.574706]
[ 81.574708] but task is already holding lock:
[ 81.574713] (&mm->mmap_sem){----}, at: [<c0106773>] sys_mmap2+0x49/0x80
[ 81.574734]
[ 81.574735] which lock already depends on the new lock.
[ 81.574737]
[ 81.574740]
[ 81.574740] the existing dependency chain (in reverse order) is:
[ 81.574740]
[ 81.574740] -> #4 (&mm->mmap_sem){----}:
[ 81.574740] [<c014d125>] __lock_acquire+0xfc6/0x12ed
[ 81.574740] [<c014d494>] lock_acquire+0x48/0x64
[ 81.574740] [<c017b299>] might_fault+0x6d/0x8d
[ 81.574740] [<c0348969>] copy_to_user+0x31/0x100
[ 81.574740] [<c019c04c>] filldir64+0x9c/0xd2
[ 81.574740] [<c01cb610>] sysfs_readdir+0x11c/0x150
[ 81.574740] [<c019c25b>] vfs_readdir+0x5b/0x87
[ 81.574740] [<c019c2ef>] sys_getdents64+0x68/0xa5
[ 81.574740] [<c0102f85>] sysenter_do_call+0x12/0x35
[ 81.574740] [<ffffffff>] 0xffffffff
[ 81.574740]
[ 81.574740] -> #3 (sysfs_mutex){--..}:
[ 81.574740] [<c014d125>] __lock_acquire+0xfc6/0x12ed
[ 81.574740] [<c014d494>] lock_acquire+0x48/0x64
[ 81.574740] [<c054ff2c>] mutex_lock_nested+0xe4/0x278
[ 81.574740] [<c01cb855>] sysfs_addrm_start+0x28/0x9a
[ 81.574740] [<c01cbd23>] create_dir+0x3f/0x77
[ 81.574740] [<c01cbd8d>] sysfs_create_dir+0x32/0x46
[ 81.574740] [<c0343a09>] kobject_add_internal+0xb7/0x158
[ 81.574740] [<c0343b55>] kobject_add_varg+0x35/0x41
[ 81.574740] [<c0343b81>] kobject_init_and_add+0x20/0x22
[ 81.574740] [<c018ea34>] sysfs_slab_add+0xe0/0x14d
[ 81.574740] [<c018ead2>] sysfs_add_func+0x31/0x53
[ 81.574740] [<c013b019>] run_workqueue+0xdc/0x1b7
[ 81.574740] [<c013b1b0>] worker_thread+0xbc/0xc8
[ 81.574740] [<c013e3ec>] kthread+0x40/0x66
[ 81.574740] [<c0103803>] kernel_thread_helper+0x7/0x10
[ 81.574740] [<ffffffff>] 0xffffffff
[ 81.574740]
[ 81.574740] -> #2 (slub_lock){----}:
[ 81.574740] [<c014d125>] __lock_acquire+0xfc6/0x12ed
[ 81.574740] [<c014d494>] lock_acquire+0x48/0x64
[ 81.574740] [<c05506bf>] down_read+0x2f/0x43
[ 81.574740] [<c054d70c>] slab_cpuup_callback+0x47/0x1ab
[ 81.574740] [<c01421db>] notifier_call_chain+0x2b/0x4a
[ 81.574740] [<c0142266>] __raw_notifier_call_chain+0x13/0x15
[ 81.574740] [<c054ca3b>] _cpu_up+0x62/0x102
[ 81.574740] [<c054cb2c>] cpu_up+0x51/0x66
[ 81.574740] [<c074f29a>] kernel_init+0x9f/0x155
[ 81.574740] [<c0103803>] kernel_thread_helper+0x7/0x10
[ 81.574740] [<ffffffff>] 0xffffffff
[ 81.574740]
[ 81.574740] -> #1 (&cpu_hotplug.lock){--..}:
[ 81.574740] [<c014d125>] __lock_acquire+0xfc6/0x12ed
[ 81.574740] [<c014d494>] lock_acquire+0x48/0x64
[ 81.574740] [<c054ff2c>] mutex_lock_nested+0xe4/0x278
[ 81.574740] [<c012e3c8>] get_online_cpus+0x31/0x45
[ 81.574740] [<c010d8d7>] mtrr_del_page+0x33/0x117
[ 81.574740] [<c010d9ef>] mtrr_del+0x34/0x3d
[ 81.574740] [<f8d9e08e>] drm_rmmap_locked+0xb6/0x168 [drm]
[ 81.574740] [<f8da3bff>] drm_master_destroy+0x74/0x131 [drm]
[ 81.574740] [<c034437c>] kref_put+0x3c/0x4a
[ 81.574740] [<f8da3b33>] drm_master_put+0x17/0x20 [drm]
[ 81.574740] [<f8d9fee2>] drm_release+0x31e/0x3e0 [drm]
[ 81.574740] [<c0191d52>] __fput+0xcf/0x173
[ 81.574740] [<c0191e14>] fput+0x1e/0x20
[ 81.574740] [<c018f5ea>] filp_close+0x56/0x60
[ 81.574740] [<c018f663>] sys_close+0x6f/0xa9
[ 81.574740] [<c0102f85>] sysenter_do_call+0x12/0x35
[ 81.574740] [<ffffffff>] 0xffffffff
[ 81.574740]
[ 81.574740] -> #0 (&dev->struct_mutex){--..}:
[ 81.574740] [<c014ce4f>] __lock_acquire+0xcf0/0x12ed
[ 81.574740] [<c014d494>] lock_acquire+0x48/0x64
[ 81.574740] [<c054ff2c>] mutex_lock_nested+0xe4/0x278
[ 81.574740] [<f8da46a6>] drm_mmap+0x2a/0x44 [drm]
[ 81.574740] [<c018132d>] mmap_region+0x27a/0x414
[ 81.574740] [<c01816b0>] do_mmap_pgoff+0x1e9/0x232
[ 81.574740] [<c0106789>] sys_mmap2+0x5f/0x80
[ 81.574740] [<c0102f85>] sysenter_do_call+0x12/0x35
[ 81.574740] [<ffffffff>] 0xffffffff
[ 81.574740]
[ 81.574740] other info that might help us debug this:
[ 81.574740]
[ 81.574740] 1 lock held by X/5165:
[ 81.574740] #0: (&mm->mmap_sem){----}, at: [<c0106773>] sys_mmap2+0x49/0x80
[ 81.574740]
[ 81.574740] stack backtrace:
[ 81.574740] Pid: 5165, comm: X Not tainted 2.6.29-rc5 #1
[ 81.574740] Call Trace:
[ 81.574740] [<c054e6fd>] ? printk+0x14/0x16
[ 81.574740] [<c014be21>] print_circular_bug_tail+0xaa/0xb5
[ 81.574740] [<c014ce4f>] __lock_acquire+0xcf0/0x12ed
[ 81.574740] [<c014d494>] lock_acquire+0x48/0x64
[ 81.574740] [<f8da46a6>] ? drm_mmap+0x2a/0x44 [drm]
[ 81.574740] [<c054ff2c>] mutex_lock_nested+0xe4/0x278
[ 81.574740] [<f8da46a6>] ? drm_mmap+0x2a/0x44 [drm]
[ 81.574740] [<f8da46a6>] ? drm_mmap+0x2a/0x44 [drm]
[ 81.574740] [<f8da46a6>] drm_mmap+0x2a/0x44 [drm]
[ 81.574740] [<c018132d>] mmap_region+0x27a/0x414
[ 81.574740] [<c01816b0>] do_mmap_pgoff+0x1e9/0x232
[ 81.574740] [<c0106789>] sys_mmap2+0x5f/0x80
[ 81.574740] [<c0102f85>] sysenter_do_call+0x12/0x35
[ 81.633885] [drm] Setting GART location based on new memory map
[ 81.635561] [drm] Loading R500 Microcode
[ 81.635634] [drm] Num pipes: 1
[ 81.635653] [drm] writeback test succeeded in 1 usecs
[ 81.914352] X:5165 conflicting memory types c0000000-d0000000
write-combining<->uncached-minus
[ 81.914362] reserve_memtype failed 0xc0000000-0xd0000000, track
write-combining, req write-combining
[ 82.664627] X:5165 conflicting memory types c0000000-d0000000
write-combining<->uncached-minus
[ 82.664637] reserve_memtype failed 0xc0000000-0xd0000000, track
write-combining, req write-combining
[ 82.957593] X:5165 conflicting memory types c0000000-d0000000
write-combining<->uncached-minus
[ 82.957601] reserve_memtype failed 0xc0000000-0xd0000000, track
write-combining, req write-combining
[ 83.014618] X:5188 freeing invalid memtype c0000000-d0000000
[ 112.175525] [drm] Num pipes: 1
[ 114.217707] X:5165 freeing invalid memtype c0000000-d0000000
[ 114.228995] X:5165 freeing invalid memtype c0000000-d0000000
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-02-15 2:14 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-02-15 2:14 [2.6.29-rc5] drm: "possible circular locking dependency" and other issues Steven Noonan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.