* [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode
@ 2023-03-24 16:09 ` Christophe Kerello
0 siblings, 0 replies; 10+ messages in thread
From: Christophe Kerello @ 2023-03-24 16:09 UTC (permalink / raw)
To: miquel.raynal, richard, vigneshr
Cc: linux-mtd, linux-kernel, linux-stm32, Christophe Kerello
FMC2 controller does not support EDO mode (timings mode 4 and 5).
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
---
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 5d627048c420..3abb63d00a0b 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1531,6 +1531,9 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
if (IS_ERR(sdrt))
return PTR_ERR(sdrt);
+ if (sdrt->tRC_min < 30000)
+ return -EOPNOTSUPP;
+
if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode
@ 2023-03-24 16:09 ` Christophe Kerello
0 siblings, 0 replies; 10+ messages in thread
From: Christophe Kerello @ 2023-03-24 16:09 UTC (permalink / raw)
To: miquel.raynal, richard, vigneshr
Cc: linux-mtd, linux-kernel, linux-stm32, Christophe Kerello
FMC2 controller does not support EDO mode (timings mode 4 and 5).
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
---
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 5d627048c420..3abb63d00a0b 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1531,6 +1531,9 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
if (IS_ERR(sdrt))
return PTR_ERR(sdrt);
+ if (sdrt->tRC_min < 30000)
+ return -EOPNOTSUPP;
+
if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode
2023-03-24 16:09 ` Christophe Kerello
@ 2023-03-24 16:25 ` Miquel Raynal
-1 siblings, 0 replies; 10+ messages in thread
From: Miquel Raynal @ 2023-03-24 16:25 UTC (permalink / raw)
To: Christophe Kerello
Cc: richard, vigneshr, linux-mtd, linux-kernel, linux-stm32
Hi Christophe,
christophe.kerello@foss.st.com wrote on Fri, 24 Mar 2023 17:09:18 +0100:
> FMC2 controller does not support EDO mode (timings mode 4 and 5).
>
> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
> ---
> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> index 5d627048c420..3abb63d00a0b 100644
> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> @@ -1531,6 +1531,9 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
> if (IS_ERR(sdrt))
> return PTR_ERR(sdrt);
>
> + if (sdrt->tRC_min < 30000)
When introducing NV-DDR support we as well added a timings.mode field,
perhaps you could use it?
> + return -EOPNOTSUPP;
> +
> if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
> return 0;
>
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode
@ 2023-03-24 16:25 ` Miquel Raynal
0 siblings, 0 replies; 10+ messages in thread
From: Miquel Raynal @ 2023-03-24 16:25 UTC (permalink / raw)
To: Christophe Kerello
Cc: richard, vigneshr, linux-mtd, linux-kernel, linux-stm32
Hi Christophe,
christophe.kerello@foss.st.com wrote on Fri, 24 Mar 2023 17:09:18 +0100:
> FMC2 controller does not support EDO mode (timings mode 4 and 5).
>
> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
> ---
> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> index 5d627048c420..3abb63d00a0b 100644
> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> @@ -1531,6 +1531,9 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
> if (IS_ERR(sdrt))
> return PTR_ERR(sdrt);
>
> + if (sdrt->tRC_min < 30000)
When introducing NV-DDR support we as well added a timings.mode field,
perhaps you could use it?
> + return -EOPNOTSUPP;
> +
> if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
> return 0;
>
Thanks,
Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode
2023-03-24 16:25 ` Miquel Raynal
@ 2023-03-24 16:34 ` Christophe Kerello
-1 siblings, 0 replies; 10+ messages in thread
From: Christophe Kerello @ 2023-03-24 16:34 UTC (permalink / raw)
To: Miquel Raynal; +Cc: richard, vigneshr, linux-mtd, linux-kernel, linux-stm32
Hello Miquel,
On 3/24/23 17:25, Miquel Raynal wrote:
> Hi Christophe,
>
> christophe.kerello@foss.st.com wrote on Fri, 24 Mar 2023 17:09:18 +0100:
>
>> FMC2 controller does not support EDO mode (timings mode 4 and 5).
>>
>> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
>> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
>> ---
>> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> index 5d627048c420..3abb63d00a0b 100644
>> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> @@ -1531,6 +1531,9 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
>> if (IS_ERR(sdrt))
>> return PTR_ERR(sdrt);
>>
>> + if (sdrt->tRC_min < 30000)
>
> When introducing NV-DDR support we as well added a timings.mode field,
> perhaps you could use it?
Yes, I can use it. It will be done in V2.
Regards,
Christophe Kerello.
>
>> + return -EOPNOTSUPP;
>> +
>> if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
>> return 0;
>>
>
>
> Thanks,
> Miquèl
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode
@ 2023-03-24 16:34 ` Christophe Kerello
0 siblings, 0 replies; 10+ messages in thread
From: Christophe Kerello @ 2023-03-24 16:34 UTC (permalink / raw)
To: Miquel Raynal; +Cc: richard, vigneshr, linux-mtd, linux-kernel, linux-stm32
Hello Miquel,
On 3/24/23 17:25, Miquel Raynal wrote:
> Hi Christophe,
>
> christophe.kerello@foss.st.com wrote on Fri, 24 Mar 2023 17:09:18 +0100:
>
>> FMC2 controller does not support EDO mode (timings mode 4 and 5).
>>
>> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
>> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
>> ---
>> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> index 5d627048c420..3abb63d00a0b 100644
>> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> @@ -1531,6 +1531,9 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
>> if (IS_ERR(sdrt))
>> return PTR_ERR(sdrt);
>>
>> + if (sdrt->tRC_min < 30000)
>
> When introducing NV-DDR support we as well added a timings.mode field,
> perhaps you could use it?
Yes, I can use it. It will be done in V2.
Regards,
Christophe Kerello.
>
>> + return -EOPNOTSUPP;
>> +
>> if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
>> return 0;
>>
>
>
> Thanks,
> Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode
2023-03-24 16:34 ` Christophe Kerello
@ 2023-03-27 8:02 ` Christophe Kerello
-1 siblings, 0 replies; 10+ messages in thread
From: Christophe Kerello @ 2023-03-27 8:02 UTC (permalink / raw)
To: Miquel Raynal; +Cc: richard, vigneshr, linux-mtd, linux-kernel, linux-stm32
Hello Miquel,
On 3/24/23 17:34, Christophe Kerello wrote:
> Hello Miquel,
>
> On 3/24/23 17:25, Miquel Raynal wrote:
>> Hi Christophe,
>>
>> christophe.kerello@foss.st.com wrote on Fri, 24 Mar 2023 17:09:18 +0100:
>>
>>> FMC2 controller does not support EDO mode (timings mode 4 and 5).
>>>
>>> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
>>> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND
>>> flash controller driver")
>>> ---
>>> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
>>> 1 file changed, 3 insertions(+)
>>>
>>> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> index 5d627048c420..3abb63d00a0b 100644
>>> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> @@ -1531,6 +1531,9 @@ static int
>>> stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
>>> if (IS_ERR(sdrt))
>>> return PTR_ERR(sdrt);
>>> + if (sdrt->tRC_min < 30000)
>>
>> When introducing NV-DDR support we as well added a timings.mode field,
>> perhaps you could use it?
>
> Yes, I can use it. It will be done in V2.
>
> Regards,
> Christophe Kerello.
>
I had a look at Kernel LTS, and timings.mode was introduced on Kernel
LTS 5.10. As this patch has also to be applied on Kernel LTS 5.4, my
proposal is to send a new patch set. The first patch will be the current
patch (fix for all Kernel LTS) and the second patch will use
timings.mode instead of checking tRC_min timings for next Kernel
delivery. Is this proposal acceptable?
Regards,
Christophe Kerello.
>>
>>> + return -EOPNOTSUPP;
>>> +
>>> if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
>>> return 0;
>>
>>
>> Thanks,
>> Miquèl
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode
@ 2023-03-27 8:02 ` Christophe Kerello
0 siblings, 0 replies; 10+ messages in thread
From: Christophe Kerello @ 2023-03-27 8:02 UTC (permalink / raw)
To: Miquel Raynal; +Cc: richard, vigneshr, linux-mtd, linux-kernel, linux-stm32
Hello Miquel,
On 3/24/23 17:34, Christophe Kerello wrote:
> Hello Miquel,
>
> On 3/24/23 17:25, Miquel Raynal wrote:
>> Hi Christophe,
>>
>> christophe.kerello@foss.st.com wrote on Fri, 24 Mar 2023 17:09:18 +0100:
>>
>>> FMC2 controller does not support EDO mode (timings mode 4 and 5).
>>>
>>> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
>>> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND
>>> flash controller driver")
>>> ---
>>> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
>>> 1 file changed, 3 insertions(+)
>>>
>>> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> index 5d627048c420..3abb63d00a0b 100644
>>> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> @@ -1531,6 +1531,9 @@ static int
>>> stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
>>> if (IS_ERR(sdrt))
>>> return PTR_ERR(sdrt);
>>> + if (sdrt->tRC_min < 30000)
>>
>> When introducing NV-DDR support we as well added a timings.mode field,
>> perhaps you could use it?
>
> Yes, I can use it. It will be done in V2.
>
> Regards,
> Christophe Kerello.
>
I had a look at Kernel LTS, and timings.mode was introduced on Kernel
LTS 5.10. As this patch has also to be applied on Kernel LTS 5.4, my
proposal is to send a new patch set. The first patch will be the current
patch (fix for all Kernel LTS) and the second patch will use
timings.mode instead of checking tRC_min timings for next Kernel
delivery. Is this proposal acceptable?
Regards,
Christophe Kerello.
>>
>>> + return -EOPNOTSUPP;
>>> +
>>> if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
>>> return 0;
>>
>>
>> Thanks,
>> Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode
2023-03-27 8:02 ` Christophe Kerello
@ 2023-03-27 8:11 ` Miquel Raynal
-1 siblings, 0 replies; 10+ messages in thread
From: Miquel Raynal @ 2023-03-27 8:11 UTC (permalink / raw)
To: Christophe Kerello
Cc: richard, vigneshr, linux-mtd, linux-kernel, linux-stm32
Hi Christophe,
christophe.kerello@foss.st.com wrote on Mon, 27 Mar 2023 10:02:13 +0200:
> Hello Miquel,
>
> On 3/24/23 17:34, Christophe Kerello wrote:
> > Hello Miquel,
> >
> > On 3/24/23 17:25, Miquel Raynal wrote:
> >> Hi Christophe,
> >>
> >> christophe.kerello@foss.st.com wrote on Fri, 24 Mar 2023 17:09:18 +0100:
> >>
> >>> FMC2 controller does not support EDO mode (timings mode 4 and 5).
> >>>
> >>> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
> >>> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND >>> flash controller driver")
> >>> ---
> >>> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
> >>> 1 file changed, 3 insertions(+)
> >>>
> >>> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c >>> b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> >>> index 5d627048c420..3abb63d00a0b 100644
> >>> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> >>> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> >>> @@ -1531,6 +1531,9 @@ static int >>> stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
> >>> if (IS_ERR(sdrt))
> >>> return PTR_ERR(sdrt);
> >>> + if (sdrt->tRC_min < 30000)
> >>
> >> When introducing NV-DDR support we as well added a timings.mode field,
> >> perhaps you could use it?
> >
> > Yes, I can use it. It will be done in V2.
> >
> > Regards,
> > Christophe Kerello.
> >
>
> I had a look at Kernel LTS, and timings.mode was introduced on Kernel LTS 5.10. As this patch has also to be applied on Kernel LTS 5.4, my proposal is to send a new patch set. The first patch will be the current patch (fix for all Kernel LTS) and the second patch will use timings.mode instead of checking tRC_min timings for next Kernel delivery. Is this proposal acceptable?
Works for me!
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode
@ 2023-03-27 8:11 ` Miquel Raynal
0 siblings, 0 replies; 10+ messages in thread
From: Miquel Raynal @ 2023-03-27 8:11 UTC (permalink / raw)
To: Christophe Kerello
Cc: richard, vigneshr, linux-mtd, linux-kernel, linux-stm32
Hi Christophe,
christophe.kerello@foss.st.com wrote on Mon, 27 Mar 2023 10:02:13 +0200:
> Hello Miquel,
>
> On 3/24/23 17:34, Christophe Kerello wrote:
> > Hello Miquel,
> >
> > On 3/24/23 17:25, Miquel Raynal wrote:
> >> Hi Christophe,
> >>
> >> christophe.kerello@foss.st.com wrote on Fri, 24 Mar 2023 17:09:18 +0100:
> >>
> >>> FMC2 controller does not support EDO mode (timings mode 4 and 5).
> >>>
> >>> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
> >>> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND >>> flash controller driver")
> >>> ---
> >>> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
> >>> 1 file changed, 3 insertions(+)
> >>>
> >>> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c >>> b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> >>> index 5d627048c420..3abb63d00a0b 100644
> >>> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> >>> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> >>> @@ -1531,6 +1531,9 @@ static int >>> stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
> >>> if (IS_ERR(sdrt))
> >>> return PTR_ERR(sdrt);
> >>> + if (sdrt->tRC_min < 30000)
> >>
> >> When introducing NV-DDR support we as well added a timings.mode field,
> >> perhaps you could use it?
> >
> > Yes, I can use it. It will be done in V2.
> >
> > Regards,
> > Christophe Kerello.
> >
>
> I had a look at Kernel LTS, and timings.mode was introduced on Kernel LTS 5.10. As this patch has also to be applied on Kernel LTS 5.4, my proposal is to send a new patch set. The first patch will be the current patch (fix for all Kernel LTS) and the second patch will use timings.mode instead of checking tRC_min timings for next Kernel delivery. Is this proposal acceptable?
Works for me!
Thanks,
Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2023-03-27 8:12 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-24 16:09 [PATCH] mtd: rawnand: stm32_fmc2: do not support EDO mode Christophe Kerello
2023-03-24 16:09 ` Christophe Kerello
2023-03-24 16:25 ` Miquel Raynal
2023-03-24 16:25 ` Miquel Raynal
2023-03-24 16:34 ` Christophe Kerello
2023-03-24 16:34 ` Christophe Kerello
2023-03-27 8:02 ` Christophe Kerello
2023-03-27 8:02 ` Christophe Kerello
2023-03-27 8:11 ` Miquel Raynal
2023-03-27 8:11 ` Miquel Raynal
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.