Re: [PATCH v2] ASoC: cros_ec_codec: Reset I2S RX when probing

[Enric Balletbo i Serra <enric.balletbo@collabora.com>]

Hi,

On 16/7/20 19:23, Guenter Roeck wrote:
> On Thu, Jul 16, 2020 at 10:09 AM Yu-Hsuan Hsu <yuhsuan@chromium.org> wrote:
>>
>> It is not guaranteed that I2S RX is disabled when the kernel booting.
>> For example, if the kernel crashes while it is enabled, it will keep
>> enabled until the next time EC reboots. Reset I2S RX when probing to
>> fix this issue.
>>
>> Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
>> ---
>>  drivers/platform/chrome/cros_ec_proto.c        | 7 ++++++-
>>  include/linux/platform_data/cros_ec_commands.h | 1 +
>>  sound/soc/codecs/cros_ec_codec.c               | 9 +++++++++
>>  3 files changed, 16 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
>> index 3e745e0fe092c..2c60690d7147c 100644
>> --- a/drivers/platform/chrome/cros_ec_proto.c
>> +++ b/drivers/platform/chrome/cros_ec_proto.c
>> @@ -572,7 +572,12 @@ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
>>                 return -ENOTSUPP;
>>         } else if (msg->result != EC_RES_SUCCESS) {
>>                 dev_dbg(ec_dev->dev, "Command result (err: %d)\n", msg->result);
>> -               return -EPROTO;
>> +               switch (msg->result) {
>> +               case EC_RES_INVALID_PARAM:
>> +                       return -EINVAL;
> 
> As we have learned, this may impact other callers of
> cros_ec_cmd_xfer_status() which only accept -EPROTO as error return
> value. In addition to that, the code is odd:
> 
>     if (msg->result == EC_RES_INVALID_VERSION) {
>         ...
>     } else if (msg->result != EC_RES_SUCCESS) {
>         switch (msg->result) {
>         ....
>         }
>     }
> 

Ack, this is odd.

> I really dislike the notion of changing error return values of
> cros_ec_cmd_xfer_status() one by one. That can only cause ongoing
> trouble with callers expecting specific error return codes (as we have
> already seen).
> 

Hmm, that's a good point. Ok.

Let's apply the Guenter's patch that maps the errors *and* fix the callers of
cros_ec_cmd_xfer_status which only accept -EPROTO (there are few).

Yu-Hsuan, can you take care of this and send a patch series with all the
required patches? If not, I can work on this next week.

Thanks,
  Enric

> Guenter
> 
>> +               default:
>> +                       return -EPROTO;
>> +               }
>>         }
>>
>>         return ret;
>> diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
>> index 69210881ebac8..11ce917ca924c 100644
>> --- a/include/linux/platform_data/cros_ec_commands.h
>> +++ b/include/linux/platform_data/cros_ec_commands.h
>> @@ -4598,6 +4598,7 @@ enum ec_codec_i2s_rx_subcmd {
>>         EC_CODEC_I2S_RX_SET_SAMPLE_DEPTH = 0x2,
>>         EC_CODEC_I2S_RX_SET_DAIFMT = 0x3,
>>         EC_CODEC_I2S_RX_SET_BCLK = 0x4,
>> +       EC_CODEC_I2S_RX_RESET = 0x5,
>>         EC_CODEC_I2S_RX_SUBCMD_COUNT,
>>  };
>>
>> diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
>> index f23956cf4ed84..b5ff30b7f1aa8 100644
>> --- a/sound/soc/codecs/cros_ec_codec.c
>> +++ b/sound/soc/codecs/cros_ec_codec.c
>> @@ -1034,6 +1034,15 @@ static int cros_ec_codec_platform_probe(struct platform_device *pdev)
>>         }
>>         priv->ec_capabilities = r.capabilities;
>>
>> +       /* Reset EC codec I2S RX. */
>> +       p.cmd = EC_CODEC_I2S_RX_RESET;
>> +       ret = send_ec_host_command(priv->ec_device, EC_CMD_EC_CODEC_I2S_RX,
>> +                                  (uint8_t *)&p, sizeof(p), NULL, 0);
>> +       if (ret == -EINVAL)
>> +               dev_info(dev, "Missing reset command. Please update your EC firmware.\n");
>> +       else if (ret)
>> +               dev_err(dev, "failed to EC_CODEC_I2S_RESET: %d\n", ret);
>> +
>>         platform_set_drvdata(pdev, priv);
>>
>>         ret = devm_snd_soc_register_component(dev, &i2s_rx_component_driver,
>> --
>> 2.27.0.389.gc38d7665816-goog
>>