* [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Hey everyone.
This patch series brings complete refactoring to the Ralink pinctrl driver
and its subdrivers.
The mt7620 pinctrl subdriver supports MT7628 and MT7688 SoCs along with
MT7620. These two share the same pin layout. The code used for MT7628 and
MT7688 is renamed from MT7628/mt7628an to MT76X8.
Ralink pinctrl driver is called rt2880 which is the name of the Ralink
RT2880 SoC. A subdriver for the Ralink RT2880 SoC is called rt288x. Rename
rt2880 to ralink.
Rename code from pinmux to pinctrl for where the operation is not about the
muxing of pins.
Rename rt288x pinctrl subdriver for the RT2880 SoC to rt2880.
Variables for functions include "grp" on the Ralink MT7620 and MT7621
subdrivers. Rename them to "func" instead as they define the functions for
the pin groups. This is already the case for the other 3 subdrivers;
RT2880, RT305x, RT3883.
Fix Kconfig to call the subdrivers, well, subdrivers.
Add new compatible strings for each subdriver and update DT binding
accordingly.
Add Ralink pinctrl driver to MAINTAINERS and add me and Sergio as the
maintainers.
Finally, fix the current rt2880 documentation and add binding for all of
the subdrivers.
I have the patches here should anyone prefer to read them there:
https://github.com/arinc9/linux/commits/ralink-pinctrl-refactor
Ralink pinctrl driver and the subdrivers were compile tested.
MT7621 pinctrl subdriver was tested on a private mt7621 board.
YAML bindings checked with:
ARCH=mips CROSS_COMPILE=mips-linux-gnu- make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/ -j$(nproc)
Arınç ÜNAL (14):
pinctrl: ralink: rename MT7628(an) functions to MT76X8
pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
pinctrl: ralink: rename pinmux functions to pinctrl
pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
pinctrl: ralink: rename driver names to subdrivers
pinctrl: ralink: add new compatible strings for each pinctrl subdriver
MAINTAINERS: add Ralink pinctrl driver
mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml | 87 ++++++++
.../pinctrl/{ralink,rt2880-pinmux.yaml => ralink,mt7621-pinctrl.yaml} | 25 ++-
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml | 68 ++++++
Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml | 89 ++++++++
Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml | 69 ++++++
MAINTAINERS | 7 +
arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
drivers/pinctrl/ralink/Kconfig | 28 +--
drivers/pinctrl/ralink/Makefile | 4 +-
drivers/pinctrl/ralink/pinctrl-mt7620.c | 302 ++++++++++++-------------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 76 +++----
drivers/pinctrl/ralink/pinctrl-ralink.c | 349 +++++++++++++++++++++++++++++
drivers/pinctrl/ralink/{pinmux.h => pinctrl-ralink.h} | 16 +-
drivers/pinctrl/ralink/pinctrl-rt2880.c | 381 ++++----------------------------
drivers/pinctrl/ralink/pinctrl-rt288x.c | 60 -----
drivers/pinctrl/ralink/pinctrl-rt305x.c | 66 +++---
drivers/pinctrl/ralink/pinctrl-rt3883.c | 50 ++---
17 files changed, 998 insertions(+), 681 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,mt7621-pinctrl.yaml} (63%)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
create mode 100644 drivers/pinctrl/ralink/pinctrl-ralink.c
rename drivers/pinctrl/ralink/{pinmux.h => pinctrl-ralink.h} (75%)
delete mode 100644 drivers/pinctrl/ralink/pinctrl-rt288x.c
^ permalink raw reply [flat|nested] 111+ messages in thread
* [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Hey everyone.
This patch series brings complete refactoring to the Ralink pinctrl driver
and its subdrivers.
The mt7620 pinctrl subdriver supports MT7628 and MT7688 SoCs along with
MT7620. These two share the same pin layout. The code used for MT7628 and
MT7688 is renamed from MT7628/mt7628an to MT76X8.
Ralink pinctrl driver is called rt2880 which is the name of the Ralink
RT2880 SoC. A subdriver for the Ralink RT2880 SoC is called rt288x. Rename
rt2880 to ralink.
Rename code from pinmux to pinctrl for where the operation is not about the
muxing of pins.
Rename rt288x pinctrl subdriver for the RT2880 SoC to rt2880.
Variables for functions include "grp" on the Ralink MT7620 and MT7621
subdrivers. Rename them to "func" instead as they define the functions for
the pin groups. This is already the case for the other 3 subdrivers;
RT2880, RT305x, RT3883.
Fix Kconfig to call the subdrivers, well, subdrivers.
Add new compatible strings for each subdriver and update DT binding
accordingly.
Add Ralink pinctrl driver to MAINTAINERS and add me and Sergio as the
maintainers.
Finally, fix the current rt2880 documentation and add binding for all of
the subdrivers.
I have the patches here should anyone prefer to read them there:
https://github.com/arinc9/linux/commits/ralink-pinctrl-refactor
Ralink pinctrl driver and the subdrivers were compile tested.
MT7621 pinctrl subdriver was tested on a private mt7621 board.
YAML bindings checked with:
ARCH=mips CROSS_COMPILE=mips-linux-gnu- make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/ -j$(nproc)
Arınç ÜNAL (14):
pinctrl: ralink: rename MT7628(an) functions to MT76X8
pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
pinctrl: ralink: rename pinmux functions to pinctrl
pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
pinctrl: ralink: rename driver names to subdrivers
pinctrl: ralink: add new compatible strings for each pinctrl subdriver
MAINTAINERS: add Ralink pinctrl driver
mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml | 87 ++++++++
.../pinctrl/{ralink,rt2880-pinmux.yaml => ralink,mt7621-pinctrl.yaml} | 25 ++-
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml | 68 ++++++
Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml | 89 ++++++++
Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml | 69 ++++++
MAINTAINERS | 7 +
arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
drivers/pinctrl/ralink/Kconfig | 28 +--
drivers/pinctrl/ralink/Makefile | 4 +-
drivers/pinctrl/ralink/pinctrl-mt7620.c | 302 ++++++++++++-------------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 76 +++----
drivers/pinctrl/ralink/pinctrl-ralink.c | 349 +++++++++++++++++++++++++++++
drivers/pinctrl/ralink/{pinmux.h => pinctrl-ralink.h} | 16 +-
drivers/pinctrl/ralink/pinctrl-rt2880.c | 381 ++++----------------------------
drivers/pinctrl/ralink/pinctrl-rt288x.c | 60 -----
drivers/pinctrl/ralink/pinctrl-rt305x.c | 66 +++---
drivers/pinctrl/ralink/pinctrl-rt3883.c | 50 ++---
17 files changed, 998 insertions(+), 681 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,mt7621-pinctrl.yaml} (63%)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
create mode 100644 drivers/pinctrl/ralink/pinctrl-ralink.c
rename drivers/pinctrl/ralink/{pinmux.h => pinctrl-ralink.h} (75%)
delete mode 100644 drivers/pinctrl/ralink/pinctrl-rt288x.c
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Hey everyone.
This patch series brings complete refactoring to the Ralink pinctrl driver
and its subdrivers.
The mt7620 pinctrl subdriver supports MT7628 and MT7688 SoCs along with
MT7620. These two share the same pin layout. The code used for MT7628 and
MT7688 is renamed from MT7628/mt7628an to MT76X8.
Ralink pinctrl driver is called rt2880 which is the name of the Ralink
RT2880 SoC. A subdriver for the Ralink RT2880 SoC is called rt288x. Rename
rt2880 to ralink.
Rename code from pinmux to pinctrl for where the operation is not about the
muxing of pins.
Rename rt288x pinctrl subdriver for the RT2880 SoC to rt2880.
Variables for functions include "grp" on the Ralink MT7620 and MT7621
subdrivers. Rename them to "func" instead as they define the functions for
the pin groups. This is already the case for the other 3 subdrivers;
RT2880, RT305x, RT3883.
Fix Kconfig to call the subdrivers, well, subdrivers.
Add new compatible strings for each subdriver and update DT binding
accordingly.
Add Ralink pinctrl driver to MAINTAINERS and add me and Sergio as the
maintainers.
Finally, fix the current rt2880 documentation and add binding for all of
the subdrivers.
I have the patches here should anyone prefer to read them there:
https://github.com/arinc9/linux/commits/ralink-pinctrl-refactor
Ralink pinctrl driver and the subdrivers were compile tested.
MT7621 pinctrl subdriver was tested on a private mt7621 board.
YAML bindings checked with:
ARCH=mips CROSS_COMPILE=mips-linux-gnu- make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/ -j$(nproc)
Arınç ÜNAL (14):
pinctrl: ralink: rename MT7628(an) functions to MT76X8
pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
pinctrl: ralink: rename pinmux functions to pinctrl
pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
pinctrl: ralink: rename driver names to subdrivers
pinctrl: ralink: add new compatible strings for each pinctrl subdriver
MAINTAINERS: add Ralink pinctrl driver
mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml | 87 ++++++++
.../pinctrl/{ralink,rt2880-pinmux.yaml => ralink,mt7621-pinctrl.yaml} | 25 ++-
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml | 68 ++++++
Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml | 89 ++++++++
Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml | 69 ++++++
MAINTAINERS | 7 +
arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
drivers/pinctrl/ralink/Kconfig | 28 +--
drivers/pinctrl/ralink/Makefile | 4 +-
drivers/pinctrl/ralink/pinctrl-mt7620.c | 302 ++++++++++++-------------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 76 +++----
drivers/pinctrl/ralink/pinctrl-ralink.c | 349 +++++++++++++++++++++++++++++
drivers/pinctrl/ralink/{pinmux.h => pinctrl-ralink.h} | 16 +-
drivers/pinctrl/ralink/pinctrl-rt2880.c | 381 ++++----------------------------
drivers/pinctrl/ralink/pinctrl-rt288x.c | 60 -----
drivers/pinctrl/ralink/pinctrl-rt305x.c | 66 +++---
drivers/pinctrl/ralink/pinctrl-rt3883.c | 50 ++---
17 files changed, 998 insertions(+), 681 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,mt7621-pinctrl.yaml} (63%)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
create mode 100644 drivers/pinctrl/ralink/pinctrl-ralink.c
rename drivers/pinctrl/ralink/{pinmux.h => pinctrl-ralink.h} (75%)
delete mode 100644 drivers/pinctrl/ralink/pinctrl-rt288x.c
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* [PATCH 01/14] pinctrl: ralink: rename MT7628(an) functions to MT76X8
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
The functions that include "MT7628(an)" are for MT7628 and MT7688 SoCs.
Rename them to MT76X8 to refer to both of the SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 218 ++++++++++++------------
1 file changed, 109 insertions(+), 109 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index 6853b5b8b0fe..d3f9feec1f74 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -112,260 +112,260 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
+static struct rt2880_pmx_func pwm1_grp_mt76x8[] = {
FUNC("sdxc d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
FUNC("pwm1", 0, 19, 1),
};
-static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
+static struct rt2880_pmx_func pwm0_grp_mt76x8[] = {
FUNC("sdxc d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
FUNC("pwm0", 0, 18, 1),
};
-static struct rt2880_pmx_func uart2_grp_mt7628[] = {
+static struct rt2880_pmx_func uart2_grp_mt76x8[] = {
FUNC("sdxc d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
FUNC("uart2", 0, 20, 2),
};
-static struct rt2880_pmx_func uart1_grp_mt7628[] = {
+static struct rt2880_pmx_func uart1_grp_mt76x8[] = {
FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
FUNC("uart1", 0, 45, 2),
};
-static struct rt2880_pmx_func i2c_grp_mt7628[] = {
+static struct rt2880_pmx_func i2c_grp_mt76x8[] = {
FUNC("-", 3, 4, 2),
FUNC("debug", 2, 4, 2),
FUNC("gpio", 1, 4, 2),
FUNC("i2c", 0, 4, 2),
};
-static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("refclk", 0, 37, 1) };
-static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) };
-static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
-static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
+static struct rt2880_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
+static struct rt2880_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
+static struct rt2880_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
+static struct rt2880_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
-static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
+static struct rt2880_pmx_func sd_mode_grp_mt76x8[] = {
FUNC("jtag", 3, 22, 8),
FUNC("utif", 2, 22, 8),
FUNC("gpio", 1, 22, 8),
FUNC("sdxc", 0, 22, 8),
};
-static struct rt2880_pmx_func uart0_grp_mt7628[] = {
+static struct rt2880_pmx_func uart0_grp_mt76x8[] = {
FUNC("-", 3, 12, 2),
FUNC("-", 2, 12, 2),
FUNC("gpio", 1, 12, 2),
FUNC("uart0", 0, 12, 2),
};
-static struct rt2880_pmx_func i2s_grp_mt7628[] = {
+static struct rt2880_pmx_func i2s_grp_mt76x8[] = {
FUNC("antenna", 3, 0, 4),
FUNC("pcm", 2, 0, 4),
FUNC("gpio", 1, 0, 4),
FUNC("i2s", 0, 0, 4),
};
-static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
+static struct rt2880_pmx_func spi_cs1_grp_mt76x8[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
FUNC("spi cs1", 0, 6, 1),
};
-static struct rt2880_pmx_func spis_grp_mt7628[] = {
+static struct rt2880_pmx_func spis_grp_mt76x8[] = {
FUNC("pwm_uart2", 3, 14, 4),
FUNC("utif", 2, 14, 4),
FUNC("gpio", 1, 14, 4),
FUNC("spis", 0, 14, 4),
};
-static struct rt2880_pmx_func gpio_grp_mt7628[] = {
+static struct rt2880_pmx_func gpio_grp_mt76x8[] = {
FUNC("pcie", 3, 11, 1),
FUNC("refclk", 2, 11, 1),
FUNC("gpio", 1, 11, 1),
FUNC("gpio", 0, 11, 1),
};
-static struct rt2880_pmx_func p4led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p4led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 30, 1),
FUNC("utif", 2, 30, 1),
FUNC("gpio", 1, 30, 1),
FUNC("p4led_kn", 0, 30, 1),
};
-static struct rt2880_pmx_func p3led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p3led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 31, 1),
FUNC("utif", 2, 31, 1),
FUNC("gpio", 1, 31, 1),
FUNC("p3led_kn", 0, 31, 1),
};
-static struct rt2880_pmx_func p2led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p2led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 32, 1),
FUNC("utif", 2, 32, 1),
FUNC("gpio", 1, 32, 1),
FUNC("p2led_kn", 0, 32, 1),
};
-static struct rt2880_pmx_func p1led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p1led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 33, 1),
FUNC("utif", 2, 33, 1),
FUNC("gpio", 1, 33, 1),
FUNC("p1led_kn", 0, 33, 1),
};
-static struct rt2880_pmx_func p0led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p0led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 34, 1),
FUNC("rsvd", 2, 34, 1),
FUNC("gpio", 1, 34, 1),
FUNC("p0led_kn", 0, 34, 1),
};
-static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func wled_kn_grp_mt76x8[] = {
FUNC("rsvd", 3, 35, 1),
FUNC("rsvd", 2, 35, 1),
FUNC("gpio", 1, 35, 1),
FUNC("wled_kn", 0, 35, 1),
};
-static struct rt2880_pmx_func p4led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p4led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 39, 1),
FUNC("utif", 2, 39, 1),
FUNC("gpio", 1, 39, 1),
FUNC("p4led_an", 0, 39, 1),
};
-static struct rt2880_pmx_func p3led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p3led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 40, 1),
FUNC("utif", 2, 40, 1),
FUNC("gpio", 1, 40, 1),
FUNC("p3led_an", 0, 40, 1),
};
-static struct rt2880_pmx_func p2led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p2led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 41, 1),
FUNC("utif", 2, 41, 1),
FUNC("gpio", 1, 41, 1),
FUNC("p2led_an", 0, 41, 1),
};
-static struct rt2880_pmx_func p1led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p1led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 42, 1),
FUNC("utif", 2, 42, 1),
FUNC("gpio", 1, 42, 1),
FUNC("p1led_an", 0, 42, 1),
};
-static struct rt2880_pmx_func p0led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p0led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 43, 1),
FUNC("rsvd", 2, 43, 1),
FUNC("gpio", 1, 43, 1),
FUNC("p0led_an", 0, 43, 1),
};
-static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
+static struct rt2880_pmx_func wled_an_grp_mt76x8[] = {
FUNC("rsvd", 3, 44, 1),
FUNC("rsvd", 2, 44, 1),
FUNC("gpio", 1, 44, 1),
FUNC("wled_an", 0, 44, 1),
};
-#define MT7628_GPIO_MODE_MASK 0x3
-
-#define MT7628_GPIO_MODE_P4LED_KN 58
-#define MT7628_GPIO_MODE_P3LED_KN 56
-#define MT7628_GPIO_MODE_P2LED_KN 54
-#define MT7628_GPIO_MODE_P1LED_KN 52
-#define MT7628_GPIO_MODE_P0LED_KN 50
-#define MT7628_GPIO_MODE_WLED_KN 48
-#define MT7628_GPIO_MODE_P4LED_AN 42
-#define MT7628_GPIO_MODE_P3LED_AN 40
-#define MT7628_GPIO_MODE_P2LED_AN 38
-#define MT7628_GPIO_MODE_P1LED_AN 36
-#define MT7628_GPIO_MODE_P0LED_AN 34
-#define MT7628_GPIO_MODE_WLED_AN 32
-#define MT7628_GPIO_MODE_PWM1 30
-#define MT7628_GPIO_MODE_PWM0 28
-#define MT7628_GPIO_MODE_UART2 26
-#define MT7628_GPIO_MODE_UART1 24
-#define MT7628_GPIO_MODE_I2C 20
-#define MT7628_GPIO_MODE_REFCLK 18
-#define MT7628_GPIO_MODE_PERST 16
-#define MT7628_GPIO_MODE_WDT 14
-#define MT7628_GPIO_MODE_SPI 12
-#define MT7628_GPIO_MODE_SDMODE 10
-#define MT7628_GPIO_MODE_UART0 8
-#define MT7628_GPIO_MODE_I2S 6
-#define MT7628_GPIO_MODE_CS1 4
-#define MT7628_GPIO_MODE_SPIS 2
-#define MT7628_GPIO_MODE_GPIO 0
-
-static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
- GRP_G("pwm1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_PWM1),
- GRP_G("pwm0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_PWM0),
- GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_UART2),
- GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_UART1),
- GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_I2C),
- GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK),
- GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST),
- GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT),
- GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI),
- GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_SDMODE),
- GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_UART0),
- GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_I2S),
- GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_CS1),
- GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_SPIS),
- GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_GPIO),
- GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_WLED_AN),
- GRP_G("p0led_an", p0led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P0LED_AN),
- GRP_G("p1led_an", p1led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P1LED_AN),
- GRP_G("p2led_an", p2led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P2LED_AN),
- GRP_G("p3led_an", p3led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P3LED_AN),
- GRP_G("p4led_an", p4led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P4LED_AN),
- GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_WLED_KN),
- GRP_G("p0led_kn", p0led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P0LED_KN),
- GRP_G("p1led_kn", p1led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P1LED_KN),
- GRP_G("p2led_kn", p2led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P2LED_KN),
- GRP_G("p3led_kn", p3led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P3LED_KN),
- GRP_G("p4led_kn", p4led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P4LED_KN),
+#define MT76X8_GPIO_MODE_MASK 0x3
+
+#define MT76X8_GPIO_MODE_P4LED_KN 58
+#define MT76X8_GPIO_MODE_P3LED_KN 56
+#define MT76X8_GPIO_MODE_P2LED_KN 54
+#define MT76X8_GPIO_MODE_P1LED_KN 52
+#define MT76X8_GPIO_MODE_P0LED_KN 50
+#define MT76X8_GPIO_MODE_WLED_KN 48
+#define MT76X8_GPIO_MODE_P4LED_AN 42
+#define MT76X8_GPIO_MODE_P3LED_AN 40
+#define MT76X8_GPIO_MODE_P2LED_AN 38
+#define MT76X8_GPIO_MODE_P1LED_AN 36
+#define MT76X8_GPIO_MODE_P0LED_AN 34
+#define MT76X8_GPIO_MODE_WLED_AN 32
+#define MT76X8_GPIO_MODE_PWM1 30
+#define MT76X8_GPIO_MODE_PWM0 28
+#define MT76X8_GPIO_MODE_UART2 26
+#define MT76X8_GPIO_MODE_UART1 24
+#define MT76X8_GPIO_MODE_I2C 20
+#define MT76X8_GPIO_MODE_REFCLK 18
+#define MT76X8_GPIO_MODE_PERST 16
+#define MT76X8_GPIO_MODE_WDT 14
+#define MT76X8_GPIO_MODE_SPI 12
+#define MT76X8_GPIO_MODE_SDMODE 10
+#define MT76X8_GPIO_MODE_UART0 8
+#define MT76X8_GPIO_MODE_I2S 6
+#define MT76X8_GPIO_MODE_CS1 4
+#define MT76X8_GPIO_MODE_SPIS 2
+#define MT76X8_GPIO_MODE_GPIO 0
+
+static struct rt2880_pmx_group mt76x8_pinmux_data[] = {
+ GRP_G("pwm1", pwm1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_PWM1),
+ GRP_G("pwm0", pwm0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_PWM0),
+ GRP_G("uart2", uart2_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_UART2),
+ GRP_G("uart1", uart1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_UART1),
+ GRP_G("i2c", i2c_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_I2C),
+ GRP("refclk", refclk_grp_mt76x8, 1, MT76X8_GPIO_MODE_REFCLK),
+ GRP("perst", perst_grp_mt76x8, 1, MT76X8_GPIO_MODE_PERST),
+ GRP("wdt", wdt_grp_mt76x8, 1, MT76X8_GPIO_MODE_WDT),
+ GRP("spi", spi_grp_mt76x8, 1, MT76X8_GPIO_MODE_SPI),
+ GRP_G("sdmode", sd_mode_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_SDMODE),
+ GRP_G("uart0", uart0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_UART0),
+ GRP_G("i2s", i2s_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_I2S),
+ GRP_G("spi cs1", spi_cs1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_CS1),
+ GRP_G("spis", spis_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_SPIS),
+ GRP_G("gpio", gpio_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_GPIO),
+ GRP_G("wled_an", wled_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_WLED_AN),
+ GRP_G("p0led_an", p0led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P0LED_AN),
+ GRP_G("p1led_an", p1led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P1LED_AN),
+ GRP_G("p2led_an", p2led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P2LED_AN),
+ GRP_G("p3led_an", p3led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P3LED_AN),
+ GRP_G("p4led_an", p4led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P4LED_AN),
+ GRP_G("wled_kn", wled_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_WLED_KN),
+ GRP_G("p0led_kn", p0led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P0LED_KN),
+ GRP_G("p1led_kn", p1led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P1LED_KN),
+ GRP_G("p2led_kn", p2led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P2LED_KN),
+ GRP_G("p3led_kn", p3led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P3LED_KN),
+ GRP_G("p4led_kn", p4led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P4LED_KN),
{ 0 }
};
static int mt7620_pinmux_probe(struct platform_device *pdev)
{
if (is_mt76x8())
- return rt2880_pinmux_init(pdev, mt7628an_pinmux_data);
+ return rt2880_pinmux_init(pdev, mt76x8_pinmux_data);
else
return rt2880_pinmux_init(pdev, mt7620a_pinmux_data);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 01/14] pinctrl: ralink: rename MT7628(an) functions to MT76X8
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
The functions that include "MT7628(an)" are for MT7628 and MT7688 SoCs.
Rename them to MT76X8 to refer to both of the SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 218 ++++++++++++------------
1 file changed, 109 insertions(+), 109 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index 6853b5b8b0fe..d3f9feec1f74 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -112,260 +112,260 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
+static struct rt2880_pmx_func pwm1_grp_mt76x8[] = {
FUNC("sdxc d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
FUNC("pwm1", 0, 19, 1),
};
-static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
+static struct rt2880_pmx_func pwm0_grp_mt76x8[] = {
FUNC("sdxc d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
FUNC("pwm0", 0, 18, 1),
};
-static struct rt2880_pmx_func uart2_grp_mt7628[] = {
+static struct rt2880_pmx_func uart2_grp_mt76x8[] = {
FUNC("sdxc d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
FUNC("uart2", 0, 20, 2),
};
-static struct rt2880_pmx_func uart1_grp_mt7628[] = {
+static struct rt2880_pmx_func uart1_grp_mt76x8[] = {
FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
FUNC("uart1", 0, 45, 2),
};
-static struct rt2880_pmx_func i2c_grp_mt7628[] = {
+static struct rt2880_pmx_func i2c_grp_mt76x8[] = {
FUNC("-", 3, 4, 2),
FUNC("debug", 2, 4, 2),
FUNC("gpio", 1, 4, 2),
FUNC("i2c", 0, 4, 2),
};
-static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("refclk", 0, 37, 1) };
-static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) };
-static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
-static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
+static struct rt2880_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
+static struct rt2880_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
+static struct rt2880_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
+static struct rt2880_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
-static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
+static struct rt2880_pmx_func sd_mode_grp_mt76x8[] = {
FUNC("jtag", 3, 22, 8),
FUNC("utif", 2, 22, 8),
FUNC("gpio", 1, 22, 8),
FUNC("sdxc", 0, 22, 8),
};
-static struct rt2880_pmx_func uart0_grp_mt7628[] = {
+static struct rt2880_pmx_func uart0_grp_mt76x8[] = {
FUNC("-", 3, 12, 2),
FUNC("-", 2, 12, 2),
FUNC("gpio", 1, 12, 2),
FUNC("uart0", 0, 12, 2),
};
-static struct rt2880_pmx_func i2s_grp_mt7628[] = {
+static struct rt2880_pmx_func i2s_grp_mt76x8[] = {
FUNC("antenna", 3, 0, 4),
FUNC("pcm", 2, 0, 4),
FUNC("gpio", 1, 0, 4),
FUNC("i2s", 0, 0, 4),
};
-static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
+static struct rt2880_pmx_func spi_cs1_grp_mt76x8[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
FUNC("spi cs1", 0, 6, 1),
};
-static struct rt2880_pmx_func spis_grp_mt7628[] = {
+static struct rt2880_pmx_func spis_grp_mt76x8[] = {
FUNC("pwm_uart2", 3, 14, 4),
FUNC("utif", 2, 14, 4),
FUNC("gpio", 1, 14, 4),
FUNC("spis", 0, 14, 4),
};
-static struct rt2880_pmx_func gpio_grp_mt7628[] = {
+static struct rt2880_pmx_func gpio_grp_mt76x8[] = {
FUNC("pcie", 3, 11, 1),
FUNC("refclk", 2, 11, 1),
FUNC("gpio", 1, 11, 1),
FUNC("gpio", 0, 11, 1),
};
-static struct rt2880_pmx_func p4led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p4led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 30, 1),
FUNC("utif", 2, 30, 1),
FUNC("gpio", 1, 30, 1),
FUNC("p4led_kn", 0, 30, 1),
};
-static struct rt2880_pmx_func p3led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p3led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 31, 1),
FUNC("utif", 2, 31, 1),
FUNC("gpio", 1, 31, 1),
FUNC("p3led_kn", 0, 31, 1),
};
-static struct rt2880_pmx_func p2led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p2led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 32, 1),
FUNC("utif", 2, 32, 1),
FUNC("gpio", 1, 32, 1),
FUNC("p2led_kn", 0, 32, 1),
};
-static struct rt2880_pmx_func p1led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p1led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 33, 1),
FUNC("utif", 2, 33, 1),
FUNC("gpio", 1, 33, 1),
FUNC("p1led_kn", 0, 33, 1),
};
-static struct rt2880_pmx_func p0led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p0led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 34, 1),
FUNC("rsvd", 2, 34, 1),
FUNC("gpio", 1, 34, 1),
FUNC("p0led_kn", 0, 34, 1),
};
-static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func wled_kn_grp_mt76x8[] = {
FUNC("rsvd", 3, 35, 1),
FUNC("rsvd", 2, 35, 1),
FUNC("gpio", 1, 35, 1),
FUNC("wled_kn", 0, 35, 1),
};
-static struct rt2880_pmx_func p4led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p4led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 39, 1),
FUNC("utif", 2, 39, 1),
FUNC("gpio", 1, 39, 1),
FUNC("p4led_an", 0, 39, 1),
};
-static struct rt2880_pmx_func p3led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p3led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 40, 1),
FUNC("utif", 2, 40, 1),
FUNC("gpio", 1, 40, 1),
FUNC("p3led_an", 0, 40, 1),
};
-static struct rt2880_pmx_func p2led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p2led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 41, 1),
FUNC("utif", 2, 41, 1),
FUNC("gpio", 1, 41, 1),
FUNC("p2led_an", 0, 41, 1),
};
-static struct rt2880_pmx_func p1led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p1led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 42, 1),
FUNC("utif", 2, 42, 1),
FUNC("gpio", 1, 42, 1),
FUNC("p1led_an", 0, 42, 1),
};
-static struct rt2880_pmx_func p0led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p0led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 43, 1),
FUNC("rsvd", 2, 43, 1),
FUNC("gpio", 1, 43, 1),
FUNC("p0led_an", 0, 43, 1),
};
-static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
+static struct rt2880_pmx_func wled_an_grp_mt76x8[] = {
FUNC("rsvd", 3, 44, 1),
FUNC("rsvd", 2, 44, 1),
FUNC("gpio", 1, 44, 1),
FUNC("wled_an", 0, 44, 1),
};
-#define MT7628_GPIO_MODE_MASK 0x3
-
-#define MT7628_GPIO_MODE_P4LED_KN 58
-#define MT7628_GPIO_MODE_P3LED_KN 56
-#define MT7628_GPIO_MODE_P2LED_KN 54
-#define MT7628_GPIO_MODE_P1LED_KN 52
-#define MT7628_GPIO_MODE_P0LED_KN 50
-#define MT7628_GPIO_MODE_WLED_KN 48
-#define MT7628_GPIO_MODE_P4LED_AN 42
-#define MT7628_GPIO_MODE_P3LED_AN 40
-#define MT7628_GPIO_MODE_P2LED_AN 38
-#define MT7628_GPIO_MODE_P1LED_AN 36
-#define MT7628_GPIO_MODE_P0LED_AN 34
-#define MT7628_GPIO_MODE_WLED_AN 32
-#define MT7628_GPIO_MODE_PWM1 30
-#define MT7628_GPIO_MODE_PWM0 28
-#define MT7628_GPIO_MODE_UART2 26
-#define MT7628_GPIO_MODE_UART1 24
-#define MT7628_GPIO_MODE_I2C 20
-#define MT7628_GPIO_MODE_REFCLK 18
-#define MT7628_GPIO_MODE_PERST 16
-#define MT7628_GPIO_MODE_WDT 14
-#define MT7628_GPIO_MODE_SPI 12
-#define MT7628_GPIO_MODE_SDMODE 10
-#define MT7628_GPIO_MODE_UART0 8
-#define MT7628_GPIO_MODE_I2S 6
-#define MT7628_GPIO_MODE_CS1 4
-#define MT7628_GPIO_MODE_SPIS 2
-#define MT7628_GPIO_MODE_GPIO 0
-
-static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
- GRP_G("pwm1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_PWM1),
- GRP_G("pwm0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_PWM0),
- GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_UART2),
- GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_UART1),
- GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_I2C),
- GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK),
- GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST),
- GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT),
- GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI),
- GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_SDMODE),
- GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_UART0),
- GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_I2S),
- GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_CS1),
- GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_SPIS),
- GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_GPIO),
- GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_WLED_AN),
- GRP_G("p0led_an", p0led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P0LED_AN),
- GRP_G("p1led_an", p1led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P1LED_AN),
- GRP_G("p2led_an", p2led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P2LED_AN),
- GRP_G("p3led_an", p3led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P3LED_AN),
- GRP_G("p4led_an", p4led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P4LED_AN),
- GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_WLED_KN),
- GRP_G("p0led_kn", p0led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P0LED_KN),
- GRP_G("p1led_kn", p1led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P1LED_KN),
- GRP_G("p2led_kn", p2led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P2LED_KN),
- GRP_G("p3led_kn", p3led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P3LED_KN),
- GRP_G("p4led_kn", p4led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P4LED_KN),
+#define MT76X8_GPIO_MODE_MASK 0x3
+
+#define MT76X8_GPIO_MODE_P4LED_KN 58
+#define MT76X8_GPIO_MODE_P3LED_KN 56
+#define MT76X8_GPIO_MODE_P2LED_KN 54
+#define MT76X8_GPIO_MODE_P1LED_KN 52
+#define MT76X8_GPIO_MODE_P0LED_KN 50
+#define MT76X8_GPIO_MODE_WLED_KN 48
+#define MT76X8_GPIO_MODE_P4LED_AN 42
+#define MT76X8_GPIO_MODE_P3LED_AN 40
+#define MT76X8_GPIO_MODE_P2LED_AN 38
+#define MT76X8_GPIO_MODE_P1LED_AN 36
+#define MT76X8_GPIO_MODE_P0LED_AN 34
+#define MT76X8_GPIO_MODE_WLED_AN 32
+#define MT76X8_GPIO_MODE_PWM1 30
+#define MT76X8_GPIO_MODE_PWM0 28
+#define MT76X8_GPIO_MODE_UART2 26
+#define MT76X8_GPIO_MODE_UART1 24
+#define MT76X8_GPIO_MODE_I2C 20
+#define MT76X8_GPIO_MODE_REFCLK 18
+#define MT76X8_GPIO_MODE_PERST 16
+#define MT76X8_GPIO_MODE_WDT 14
+#define MT76X8_GPIO_MODE_SPI 12
+#define MT76X8_GPIO_MODE_SDMODE 10
+#define MT76X8_GPIO_MODE_UART0 8
+#define MT76X8_GPIO_MODE_I2S 6
+#define MT76X8_GPIO_MODE_CS1 4
+#define MT76X8_GPIO_MODE_SPIS 2
+#define MT76X8_GPIO_MODE_GPIO 0
+
+static struct rt2880_pmx_group mt76x8_pinmux_data[] = {
+ GRP_G("pwm1", pwm1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_PWM1),
+ GRP_G("pwm0", pwm0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_PWM0),
+ GRP_G("uart2", uart2_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_UART2),
+ GRP_G("uart1", uart1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_UART1),
+ GRP_G("i2c", i2c_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_I2C),
+ GRP("refclk", refclk_grp_mt76x8, 1, MT76X8_GPIO_MODE_REFCLK),
+ GRP("perst", perst_grp_mt76x8, 1, MT76X8_GPIO_MODE_PERST),
+ GRP("wdt", wdt_grp_mt76x8, 1, MT76X8_GPIO_MODE_WDT),
+ GRP("spi", spi_grp_mt76x8, 1, MT76X8_GPIO_MODE_SPI),
+ GRP_G("sdmode", sd_mode_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_SDMODE),
+ GRP_G("uart0", uart0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_UART0),
+ GRP_G("i2s", i2s_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_I2S),
+ GRP_G("spi cs1", spi_cs1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_CS1),
+ GRP_G("spis", spis_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_SPIS),
+ GRP_G("gpio", gpio_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_GPIO),
+ GRP_G("wled_an", wled_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_WLED_AN),
+ GRP_G("p0led_an", p0led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P0LED_AN),
+ GRP_G("p1led_an", p1led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P1LED_AN),
+ GRP_G("p2led_an", p2led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P2LED_AN),
+ GRP_G("p3led_an", p3led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P3LED_AN),
+ GRP_G("p4led_an", p4led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P4LED_AN),
+ GRP_G("wled_kn", wled_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_WLED_KN),
+ GRP_G("p0led_kn", p0led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P0LED_KN),
+ GRP_G("p1led_kn", p1led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P1LED_KN),
+ GRP_G("p2led_kn", p2led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P2LED_KN),
+ GRP_G("p3led_kn", p3led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P3LED_KN),
+ GRP_G("p4led_kn", p4led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P4LED_KN),
{ 0 }
};
static int mt7620_pinmux_probe(struct platform_device *pdev)
{
if (is_mt76x8())
- return rt2880_pinmux_init(pdev, mt7628an_pinmux_data);
+ return rt2880_pinmux_init(pdev, mt76x8_pinmux_data);
else
return rt2880_pinmux_init(pdev, mt7620a_pinmux_data);
}
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 01/14] pinctrl: ralink: rename MT7628(an) functions to MT76X8
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
The functions that include "MT7628(an)" are for MT7628 and MT7688 SoCs.
Rename them to MT76X8 to refer to both of the SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 218 ++++++++++++------------
1 file changed, 109 insertions(+), 109 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index 6853b5b8b0fe..d3f9feec1f74 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -112,260 +112,260 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
+static struct rt2880_pmx_func pwm1_grp_mt76x8[] = {
FUNC("sdxc d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
FUNC("pwm1", 0, 19, 1),
};
-static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
+static struct rt2880_pmx_func pwm0_grp_mt76x8[] = {
FUNC("sdxc d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
FUNC("pwm0", 0, 18, 1),
};
-static struct rt2880_pmx_func uart2_grp_mt7628[] = {
+static struct rt2880_pmx_func uart2_grp_mt76x8[] = {
FUNC("sdxc d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
FUNC("uart2", 0, 20, 2),
};
-static struct rt2880_pmx_func uart1_grp_mt7628[] = {
+static struct rt2880_pmx_func uart1_grp_mt76x8[] = {
FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
FUNC("uart1", 0, 45, 2),
};
-static struct rt2880_pmx_func i2c_grp_mt7628[] = {
+static struct rt2880_pmx_func i2c_grp_mt76x8[] = {
FUNC("-", 3, 4, 2),
FUNC("debug", 2, 4, 2),
FUNC("gpio", 1, 4, 2),
FUNC("i2c", 0, 4, 2),
};
-static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("refclk", 0, 37, 1) };
-static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) };
-static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
-static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
+static struct rt2880_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
+static struct rt2880_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
+static struct rt2880_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
+static struct rt2880_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
-static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
+static struct rt2880_pmx_func sd_mode_grp_mt76x8[] = {
FUNC("jtag", 3, 22, 8),
FUNC("utif", 2, 22, 8),
FUNC("gpio", 1, 22, 8),
FUNC("sdxc", 0, 22, 8),
};
-static struct rt2880_pmx_func uart0_grp_mt7628[] = {
+static struct rt2880_pmx_func uart0_grp_mt76x8[] = {
FUNC("-", 3, 12, 2),
FUNC("-", 2, 12, 2),
FUNC("gpio", 1, 12, 2),
FUNC("uart0", 0, 12, 2),
};
-static struct rt2880_pmx_func i2s_grp_mt7628[] = {
+static struct rt2880_pmx_func i2s_grp_mt76x8[] = {
FUNC("antenna", 3, 0, 4),
FUNC("pcm", 2, 0, 4),
FUNC("gpio", 1, 0, 4),
FUNC("i2s", 0, 0, 4),
};
-static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
+static struct rt2880_pmx_func spi_cs1_grp_mt76x8[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
FUNC("spi cs1", 0, 6, 1),
};
-static struct rt2880_pmx_func spis_grp_mt7628[] = {
+static struct rt2880_pmx_func spis_grp_mt76x8[] = {
FUNC("pwm_uart2", 3, 14, 4),
FUNC("utif", 2, 14, 4),
FUNC("gpio", 1, 14, 4),
FUNC("spis", 0, 14, 4),
};
-static struct rt2880_pmx_func gpio_grp_mt7628[] = {
+static struct rt2880_pmx_func gpio_grp_mt76x8[] = {
FUNC("pcie", 3, 11, 1),
FUNC("refclk", 2, 11, 1),
FUNC("gpio", 1, 11, 1),
FUNC("gpio", 0, 11, 1),
};
-static struct rt2880_pmx_func p4led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p4led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 30, 1),
FUNC("utif", 2, 30, 1),
FUNC("gpio", 1, 30, 1),
FUNC("p4led_kn", 0, 30, 1),
};
-static struct rt2880_pmx_func p3led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p3led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 31, 1),
FUNC("utif", 2, 31, 1),
FUNC("gpio", 1, 31, 1),
FUNC("p3led_kn", 0, 31, 1),
};
-static struct rt2880_pmx_func p2led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p2led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 32, 1),
FUNC("utif", 2, 32, 1),
FUNC("gpio", 1, 32, 1),
FUNC("p2led_kn", 0, 32, 1),
};
-static struct rt2880_pmx_func p1led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p1led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 33, 1),
FUNC("utif", 2, 33, 1),
FUNC("gpio", 1, 33, 1),
FUNC("p1led_kn", 0, 33, 1),
};
-static struct rt2880_pmx_func p0led_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func p0led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 34, 1),
FUNC("rsvd", 2, 34, 1),
FUNC("gpio", 1, 34, 1),
FUNC("p0led_kn", 0, 34, 1),
};
-static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
+static struct rt2880_pmx_func wled_kn_grp_mt76x8[] = {
FUNC("rsvd", 3, 35, 1),
FUNC("rsvd", 2, 35, 1),
FUNC("gpio", 1, 35, 1),
FUNC("wled_kn", 0, 35, 1),
};
-static struct rt2880_pmx_func p4led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p4led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 39, 1),
FUNC("utif", 2, 39, 1),
FUNC("gpio", 1, 39, 1),
FUNC("p4led_an", 0, 39, 1),
};
-static struct rt2880_pmx_func p3led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p3led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 40, 1),
FUNC("utif", 2, 40, 1),
FUNC("gpio", 1, 40, 1),
FUNC("p3led_an", 0, 40, 1),
};
-static struct rt2880_pmx_func p2led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p2led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 41, 1),
FUNC("utif", 2, 41, 1),
FUNC("gpio", 1, 41, 1),
FUNC("p2led_an", 0, 41, 1),
};
-static struct rt2880_pmx_func p1led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p1led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 42, 1),
FUNC("utif", 2, 42, 1),
FUNC("gpio", 1, 42, 1),
FUNC("p1led_an", 0, 42, 1),
};
-static struct rt2880_pmx_func p0led_an_grp_mt7628[] = {
+static struct rt2880_pmx_func p0led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 43, 1),
FUNC("rsvd", 2, 43, 1),
FUNC("gpio", 1, 43, 1),
FUNC("p0led_an", 0, 43, 1),
};
-static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
+static struct rt2880_pmx_func wled_an_grp_mt76x8[] = {
FUNC("rsvd", 3, 44, 1),
FUNC("rsvd", 2, 44, 1),
FUNC("gpio", 1, 44, 1),
FUNC("wled_an", 0, 44, 1),
};
-#define MT7628_GPIO_MODE_MASK 0x3
-
-#define MT7628_GPIO_MODE_P4LED_KN 58
-#define MT7628_GPIO_MODE_P3LED_KN 56
-#define MT7628_GPIO_MODE_P2LED_KN 54
-#define MT7628_GPIO_MODE_P1LED_KN 52
-#define MT7628_GPIO_MODE_P0LED_KN 50
-#define MT7628_GPIO_MODE_WLED_KN 48
-#define MT7628_GPIO_MODE_P4LED_AN 42
-#define MT7628_GPIO_MODE_P3LED_AN 40
-#define MT7628_GPIO_MODE_P2LED_AN 38
-#define MT7628_GPIO_MODE_P1LED_AN 36
-#define MT7628_GPIO_MODE_P0LED_AN 34
-#define MT7628_GPIO_MODE_WLED_AN 32
-#define MT7628_GPIO_MODE_PWM1 30
-#define MT7628_GPIO_MODE_PWM0 28
-#define MT7628_GPIO_MODE_UART2 26
-#define MT7628_GPIO_MODE_UART1 24
-#define MT7628_GPIO_MODE_I2C 20
-#define MT7628_GPIO_MODE_REFCLK 18
-#define MT7628_GPIO_MODE_PERST 16
-#define MT7628_GPIO_MODE_WDT 14
-#define MT7628_GPIO_MODE_SPI 12
-#define MT7628_GPIO_MODE_SDMODE 10
-#define MT7628_GPIO_MODE_UART0 8
-#define MT7628_GPIO_MODE_I2S 6
-#define MT7628_GPIO_MODE_CS1 4
-#define MT7628_GPIO_MODE_SPIS 2
-#define MT7628_GPIO_MODE_GPIO 0
-
-static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
- GRP_G("pwm1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_PWM1),
- GRP_G("pwm0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_PWM0),
- GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_UART2),
- GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_UART1),
- GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_I2C),
- GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK),
- GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST),
- GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT),
- GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI),
- GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_SDMODE),
- GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_UART0),
- GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_I2S),
- GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_CS1),
- GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_SPIS),
- GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_GPIO),
- GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_WLED_AN),
- GRP_G("p0led_an", p0led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P0LED_AN),
- GRP_G("p1led_an", p1led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P1LED_AN),
- GRP_G("p2led_an", p2led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P2LED_AN),
- GRP_G("p3led_an", p3led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P3LED_AN),
- GRP_G("p4led_an", p4led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P4LED_AN),
- GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_WLED_KN),
- GRP_G("p0led_kn", p0led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P0LED_KN),
- GRP_G("p1led_kn", p1led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P1LED_KN),
- GRP_G("p2led_kn", p2led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P2LED_KN),
- GRP_G("p3led_kn", p3led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P3LED_KN),
- GRP_G("p4led_kn", p4led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_P4LED_KN),
+#define MT76X8_GPIO_MODE_MASK 0x3
+
+#define MT76X8_GPIO_MODE_P4LED_KN 58
+#define MT76X8_GPIO_MODE_P3LED_KN 56
+#define MT76X8_GPIO_MODE_P2LED_KN 54
+#define MT76X8_GPIO_MODE_P1LED_KN 52
+#define MT76X8_GPIO_MODE_P0LED_KN 50
+#define MT76X8_GPIO_MODE_WLED_KN 48
+#define MT76X8_GPIO_MODE_P4LED_AN 42
+#define MT76X8_GPIO_MODE_P3LED_AN 40
+#define MT76X8_GPIO_MODE_P2LED_AN 38
+#define MT76X8_GPIO_MODE_P1LED_AN 36
+#define MT76X8_GPIO_MODE_P0LED_AN 34
+#define MT76X8_GPIO_MODE_WLED_AN 32
+#define MT76X8_GPIO_MODE_PWM1 30
+#define MT76X8_GPIO_MODE_PWM0 28
+#define MT76X8_GPIO_MODE_UART2 26
+#define MT76X8_GPIO_MODE_UART1 24
+#define MT76X8_GPIO_MODE_I2C 20
+#define MT76X8_GPIO_MODE_REFCLK 18
+#define MT76X8_GPIO_MODE_PERST 16
+#define MT76X8_GPIO_MODE_WDT 14
+#define MT76X8_GPIO_MODE_SPI 12
+#define MT76X8_GPIO_MODE_SDMODE 10
+#define MT76X8_GPIO_MODE_UART0 8
+#define MT76X8_GPIO_MODE_I2S 6
+#define MT76X8_GPIO_MODE_CS1 4
+#define MT76X8_GPIO_MODE_SPIS 2
+#define MT76X8_GPIO_MODE_GPIO 0
+
+static struct rt2880_pmx_group mt76x8_pinmux_data[] = {
+ GRP_G("pwm1", pwm1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_PWM1),
+ GRP_G("pwm0", pwm0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_PWM0),
+ GRP_G("uart2", uart2_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_UART2),
+ GRP_G("uart1", uart1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_UART1),
+ GRP_G("i2c", i2c_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_I2C),
+ GRP("refclk", refclk_grp_mt76x8, 1, MT76X8_GPIO_MODE_REFCLK),
+ GRP("perst", perst_grp_mt76x8, 1, MT76X8_GPIO_MODE_PERST),
+ GRP("wdt", wdt_grp_mt76x8, 1, MT76X8_GPIO_MODE_WDT),
+ GRP("spi", spi_grp_mt76x8, 1, MT76X8_GPIO_MODE_SPI),
+ GRP_G("sdmode", sd_mode_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_SDMODE),
+ GRP_G("uart0", uart0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_UART0),
+ GRP_G("i2s", i2s_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_I2S),
+ GRP_G("spi cs1", spi_cs1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_CS1),
+ GRP_G("spis", spis_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_SPIS),
+ GRP_G("gpio", gpio_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_GPIO),
+ GRP_G("wled_an", wled_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_WLED_AN),
+ GRP_G("p0led_an", p0led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P0LED_AN),
+ GRP_G("p1led_an", p1led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P1LED_AN),
+ GRP_G("p2led_an", p2led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P2LED_AN),
+ GRP_G("p3led_an", p3led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P3LED_AN),
+ GRP_G("p4led_an", p4led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P4LED_AN),
+ GRP_G("wled_kn", wled_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_WLED_KN),
+ GRP_G("p0led_kn", p0led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P0LED_KN),
+ GRP_G("p1led_kn", p1led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P1LED_KN),
+ GRP_G("p2led_kn", p2led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P2LED_KN),
+ GRP_G("p3led_kn", p3led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P3LED_KN),
+ GRP_G("p4led_kn", p4led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ 1, MT76X8_GPIO_MODE_P4LED_KN),
{ 0 }
};
static int mt7620_pinmux_probe(struct platform_device *pdev)
{
if (is_mt76x8())
- return rt2880_pinmux_init(pdev, mt7628an_pinmux_data);
+ return rt2880_pinmux_init(pdev, mt76x8_pinmux_data);
else
return rt2880_pinmux_init(pdev, mt7620a_pinmux_data);
}
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 02/14] pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
pinctrl-rt2880.c and pinmux.h make up the Ralink pinctrl driver. Rename
pinctrl-rt2880.c to pinctrl-ralink.c. Rename pinmux.h to pinctrl-ralink.h.
Fix references to it. Rename functions that include "rt2880" to "ralink".
Remove PINCTRL_RT2880 symbol and make the existing PINCTRL_RALINK symbol
compile pinctrl-ralink.c. Change the bool to "Ralink pinctrl driver".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/Kconfig | 16 ++--
drivers/pinctrl/ralink/Makefile | 2 +-
drivers/pinctrl/ralink/pinctrl-mt7620.c | 92 +++++++++----------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 30 +++---
.../{pinctrl-rt2880.c => pinctrl-ralink.c} | 90 +++++++++---------
.../ralink/{pinmux.h => pinctrl-ralink.h} | 16 ++--
drivers/pinctrl/ralink/pinctrl-rt288x.c | 20 ++--
drivers/pinctrl/ralink/pinctrl-rt305x.c | 44 ++++-----
drivers/pinctrl/ralink/pinctrl-rt3883.c | 28 +++---
9 files changed, 167 insertions(+), 171 deletions(-)
rename drivers/pinctrl/ralink/{pinctrl-rt2880.c => pinctrl-ralink.c} (73%)
rename drivers/pinctrl/ralink/{pinmux.h => pinctrl-ralink.h} (75%)
diff --git a/drivers/pinctrl/ralink/Kconfig b/drivers/pinctrl/ralink/Kconfig
index a76ee3deb8c3..d0f0a8f2b9b7 100644
--- a/drivers/pinctrl/ralink/Kconfig
+++ b/drivers/pinctrl/ralink/Kconfig
@@ -3,37 +3,33 @@ menu "Ralink pinctrl drivers"
depends on RALINK
config PINCTRL_RALINK
- bool "Ralink pin control support"
- default y if RALINK
-
-config PINCTRL_RT2880
- bool "RT2880 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "Ralink pinctrl driver"
select PINMUX
select GENERIC_PINCONF
config PINCTRL_MT7620
bool "mt7620 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_MT7620
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_MT7621
bool "mt7621 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_MT7621
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_RT288X
bool "RT288X pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT288X
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_RT305X
bool "RT305X pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT305X
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_RT3883
bool "RT3883 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT3883
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
endmenu
diff --git a/drivers/pinctrl/ralink/Makefile b/drivers/pinctrl/ralink/Makefile
index a15610206ced..2c1323b74e96 100644
--- a/drivers/pinctrl/ralink/Makefile
+++ b/drivers/pinctrl/ralink/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
+obj-$(CONFIG_PINCTRL_RALINK) += pinctrl-ralink.o
obj-$(CONFIG_PINCTRL_MT7620) += pinctrl-mt7620.o
obj-$(CONFIG_PINCTRL_MT7621) += pinctrl-mt7621.o
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index d3f9feec1f74..51b863d85c51 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -5,7 +5,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define MT7620_GPIO_MODE_UART0_SHIFT 2
#define MT7620_GPIO_MODE_UART0_MASK 0x7
@@ -54,20 +54,20 @@
#define MT7620_GPIO_MODE_EPHY 15
#define MT7620_GPIO_MODE_PA 20
-static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
-static struct rt2880_pmx_func mdio_grp[] = {
+static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func mdio_grp[] = {
FUNC("mdio", MT7620_GPIO_MODE_MDIO, 22, 2),
FUNC("refclk", MT7620_GPIO_MODE_MDIO_REFCLK, 22, 2),
};
-static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
-static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
-static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
-static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
-static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
-static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
-static struct rt2880_pmx_func uartf_grp[] = {
+static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
+static struct ralink_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
+static struct ralink_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
+static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
+static struct ralink_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
+static struct ralink_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
+static struct ralink_pmx_func uartf_grp[] = {
FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
@@ -76,20 +76,20 @@ static struct rt2880_pmx_func uartf_grp[] = {
FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct rt2880_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func wdt_grp[] = {
FUNC("wdt rst", 0, 17, 1),
FUNC("wdt refclk", 0, 17, 1),
};
-static struct rt2880_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_grp[] = {
FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
};
-static struct rt2880_pmx_func nd_sd_grp[] = {
+static struct ralink_pmx_func nd_sd_grp[] = {
FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
};
-static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
+static struct ralink_pmx_group mt7620a_pinmux_data[] = {
GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
MT7620_GPIO_MODE_UART0_SHIFT),
@@ -112,166 +112,166 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_func pwm1_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm1_grp_mt76x8[] = {
FUNC("sdxc d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
FUNC("pwm1", 0, 19, 1),
};
-static struct rt2880_pmx_func pwm0_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm0_grp_mt76x8[] = {
FUNC("sdxc d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
FUNC("pwm0", 0, 18, 1),
};
-static struct rt2880_pmx_func uart2_grp_mt76x8[] = {
+static struct ralink_pmx_func uart2_grp_mt76x8[] = {
FUNC("sdxc d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
FUNC("uart2", 0, 20, 2),
};
-static struct rt2880_pmx_func uart1_grp_mt76x8[] = {
+static struct ralink_pmx_func uart1_grp_mt76x8[] = {
FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
FUNC("uart1", 0, 45, 2),
};
-static struct rt2880_pmx_func i2c_grp_mt76x8[] = {
+static struct ralink_pmx_func i2c_grp_mt76x8[] = {
FUNC("-", 3, 4, 2),
FUNC("debug", 2, 4, 2),
FUNC("gpio", 1, 4, 2),
FUNC("i2c", 0, 4, 2),
};
-static struct rt2880_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
-static struct rt2880_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
-static struct rt2880_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
-static struct rt2880_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
+static struct ralink_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
+static struct ralink_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
+static struct ralink_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
+static struct ralink_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
-static struct rt2880_pmx_func sd_mode_grp_mt76x8[] = {
+static struct ralink_pmx_func sd_mode_grp_mt76x8[] = {
FUNC("jtag", 3, 22, 8),
FUNC("utif", 2, 22, 8),
FUNC("gpio", 1, 22, 8),
FUNC("sdxc", 0, 22, 8),
};
-static struct rt2880_pmx_func uart0_grp_mt76x8[] = {
+static struct ralink_pmx_func uart0_grp_mt76x8[] = {
FUNC("-", 3, 12, 2),
FUNC("-", 2, 12, 2),
FUNC("gpio", 1, 12, 2),
FUNC("uart0", 0, 12, 2),
};
-static struct rt2880_pmx_func i2s_grp_mt76x8[] = {
+static struct ralink_pmx_func i2s_grp_mt76x8[] = {
FUNC("antenna", 3, 0, 4),
FUNC("pcm", 2, 0, 4),
FUNC("gpio", 1, 0, 4),
FUNC("i2s", 0, 0, 4),
};
-static struct rt2880_pmx_func spi_cs1_grp_mt76x8[] = {
+static struct ralink_pmx_func spi_cs1_grp_mt76x8[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
FUNC("spi cs1", 0, 6, 1),
};
-static struct rt2880_pmx_func spis_grp_mt76x8[] = {
+static struct ralink_pmx_func spis_grp_mt76x8[] = {
FUNC("pwm_uart2", 3, 14, 4),
FUNC("utif", 2, 14, 4),
FUNC("gpio", 1, 14, 4),
FUNC("spis", 0, 14, 4),
};
-static struct rt2880_pmx_func gpio_grp_mt76x8[] = {
+static struct ralink_pmx_func gpio_grp_mt76x8[] = {
FUNC("pcie", 3, 11, 1),
FUNC("refclk", 2, 11, 1),
FUNC("gpio", 1, 11, 1),
FUNC("gpio", 0, 11, 1),
};
-static struct rt2880_pmx_func p4led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 30, 1),
FUNC("utif", 2, 30, 1),
FUNC("gpio", 1, 30, 1),
FUNC("p4led_kn", 0, 30, 1),
};
-static struct rt2880_pmx_func p3led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 31, 1),
FUNC("utif", 2, 31, 1),
FUNC("gpio", 1, 31, 1),
FUNC("p3led_kn", 0, 31, 1),
};
-static struct rt2880_pmx_func p2led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 32, 1),
FUNC("utif", 2, 32, 1),
FUNC("gpio", 1, 32, 1),
FUNC("p2led_kn", 0, 32, 1),
};
-static struct rt2880_pmx_func p1led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 33, 1),
FUNC("utif", 2, 33, 1),
FUNC("gpio", 1, 33, 1),
FUNC("p1led_kn", 0, 33, 1),
};
-static struct rt2880_pmx_func p0led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 34, 1),
FUNC("rsvd", 2, 34, 1),
FUNC("gpio", 1, 34, 1),
FUNC("p0led_kn", 0, 34, 1),
};
-static struct rt2880_pmx_func wled_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_kn_grp_mt76x8[] = {
FUNC("rsvd", 3, 35, 1),
FUNC("rsvd", 2, 35, 1),
FUNC("gpio", 1, 35, 1),
FUNC("wled_kn", 0, 35, 1),
};
-static struct rt2880_pmx_func p4led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 39, 1),
FUNC("utif", 2, 39, 1),
FUNC("gpio", 1, 39, 1),
FUNC("p4led_an", 0, 39, 1),
};
-static struct rt2880_pmx_func p3led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 40, 1),
FUNC("utif", 2, 40, 1),
FUNC("gpio", 1, 40, 1),
FUNC("p3led_an", 0, 40, 1),
};
-static struct rt2880_pmx_func p2led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 41, 1),
FUNC("utif", 2, 41, 1),
FUNC("gpio", 1, 41, 1),
FUNC("p2led_an", 0, 41, 1),
};
-static struct rt2880_pmx_func p1led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 42, 1),
FUNC("utif", 2, 42, 1),
FUNC("gpio", 1, 42, 1),
FUNC("p1led_an", 0, 42, 1),
};
-static struct rt2880_pmx_func p0led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 43, 1),
FUNC("rsvd", 2, 43, 1),
FUNC("gpio", 1, 43, 1),
FUNC("p0led_an", 0, 43, 1),
};
-static struct rt2880_pmx_func wled_an_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_an_grp_mt76x8[] = {
FUNC("rsvd", 3, 44, 1),
FUNC("rsvd", 2, 44, 1),
FUNC("gpio", 1, 44, 1),
@@ -308,7 +308,7 @@ static struct rt2880_pmx_func wled_an_grp_mt76x8[] = {
#define MT76X8_GPIO_MODE_SPIS 2
#define MT76X8_GPIO_MODE_GPIO 0
-static struct rt2880_pmx_group mt76x8_pinmux_data[] = {
+static struct ralink_pmx_group mt76x8_pinmux_data[] = {
GRP_G("pwm1", pwm1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_PWM1),
GRP_G("pwm0", pwm0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
@@ -365,9 +365,9 @@ static struct rt2880_pmx_group mt76x8_pinmux_data[] = {
static int mt7620_pinmux_probe(struct platform_device *pdev)
{
if (is_mt76x8())
- return rt2880_pinmux_init(pdev, mt76x8_pinmux_data);
+ return ralink_pinmux_init(pdev, mt76x8_pinmux_data);
else
- return rt2880_pinmux_init(pdev, mt7620a_pinmux_data);
+ return ralink_pinmux_init(pdev, mt7620a_pinmux_data);
}
static const struct of_device_id mt7620_pinmux_match[] = {
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index 7d96144c474e..14b89cb43d4c 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -3,7 +3,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define MT7621_GPIO_MODE_UART1 1
#define MT7621_GPIO_MODE_I2C 2
@@ -34,40 +34,40 @@
#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
#define MT7621_GPIO_MODE_SDHCI_GPIO 1
-static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
-static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
-static struct rt2880_pmx_func uart3_grp[] = {
+static struct ralink_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
+static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
+static struct ralink_pmx_func uart3_grp[] = {
FUNC("uart3", 0, 5, 4),
FUNC("i2s", 2, 5, 4),
FUNC("spdif3", 3, 5, 4),
};
-static struct rt2880_pmx_func uart2_grp[] = {
+static struct ralink_pmx_func uart2_grp[] = {
FUNC("uart2", 0, 9, 4),
FUNC("pcm", 2, 9, 4),
FUNC("spdif2", 3, 9, 4),
};
-static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
-static struct rt2880_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
+static struct ralink_pmx_func wdt_grp[] = {
FUNC("wdt rst", 0, 18, 1),
FUNC("wdt refclk", 2, 18, 1),
};
-static struct rt2880_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_grp[] = {
FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
};
-static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
-static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
-static struct rt2880_pmx_func spi_grp[] = {
+static struct ralink_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
+static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct ralink_pmx_func spi_grp[] = {
FUNC("spi", 0, 34, 7),
FUNC("nand1", 2, 34, 7),
};
-static struct rt2880_pmx_func sdhci_grp[] = {
+static struct ralink_pmx_func sdhci_grp[] = {
FUNC("sdhci", 0, 41, 8),
FUNC("nand2", 2, 41, 8),
};
-static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
-static struct rt2880_pmx_group mt7621_pinmux_data[] = {
+static struct ralink_pmx_group mt7621_pinmux_data[] = {
GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
@@ -92,7 +92,7 @@ static struct rt2880_pmx_group mt7621_pinmux_data[] = {
static int mt7621_pinmux_probe(struct platform_device *pdev)
{
- return rt2880_pinmux_init(pdev, mt7621_pinmux_data);
+ return ralink_pinmux_init(pdev, mt7621_pinmux_data);
}
static const struct of_device_id mt7621_pinmux_match[] = {
diff --git a/drivers/pinctrl/ralink/pinctrl-rt2880.c b/drivers/pinctrl/ralink/pinctrl-ralink.c
similarity index 73%
rename from drivers/pinctrl/ralink/pinctrl-rt2880.c
rename to drivers/pinctrl/ralink/pinctrl-ralink.c
index 96fc06d1b8b9..841f23f55c95 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt2880.c
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.c
@@ -19,23 +19,23 @@
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/mt7620.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#include "../core.h"
#include "../pinctrl-utils.h"
#define SYSC_REG_GPIO_MODE 0x60
#define SYSC_REG_GPIO_MODE2 0x64
-struct rt2880_priv {
+struct ralink_priv {
struct device *dev;
struct pinctrl_pin_desc *pads;
struct pinctrl_desc *desc;
- struct rt2880_pmx_func **func;
+ struct ralink_pmx_func **func;
int func_count;
- struct rt2880_pmx_group *groups;
+ struct ralink_pmx_group *groups;
const char **group_names;
int group_count;
@@ -43,27 +43,27 @@ struct rt2880_priv {
int max_pins;
};
-static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
+static int ralink_get_group_count(struct pinctrl_dev *pctrldev)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return p->group_count;
}
-static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
+static const char *ralink_get_group_name(struct pinctrl_dev *pctrldev,
unsigned int group)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return (group >= p->group_count) ? NULL : p->group_names[group];
}
-static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
+static int ralink_get_group_pins(struct pinctrl_dev *pctrldev,
unsigned int group,
const unsigned int **pins,
unsigned int *num_pins)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
if (group >= p->group_count)
return -EINVAL;
@@ -74,35 +74,35 @@ static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
return 0;
}
-static const struct pinctrl_ops rt2880_pctrl_ops = {
- .get_groups_count = rt2880_get_group_count,
- .get_group_name = rt2880_get_group_name,
- .get_group_pins = rt2880_get_group_pins,
+static const struct pinctrl_ops ralink_pctrl_ops = {
+ .get_groups_count = ralink_get_group_count,
+ .get_group_name = ralink_get_group_name,
+ .get_group_pins = ralink_get_group_pins,
.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
.dt_free_map = pinconf_generic_dt_free_map,
};
-static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
+static int ralink_pmx_func_count(struct pinctrl_dev *pctrldev)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return p->func_count;
}
-static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
+static const char *ralink_pmx_func_name(struct pinctrl_dev *pctrldev,
unsigned int func)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return p->func[func]->name;
}
-static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
+static int ralink_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
unsigned int func,
const char * const **groups,
unsigned int * const num_groups)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
if (p->func[func]->group_count == 1)
*groups = &p->group_names[p->func[func]->groups[0]];
@@ -114,10 +114,10 @@ static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
return 0;
}
-static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
+static int ralink_pmx_group_enable(struct pinctrl_dev *pctrldev,
unsigned int func, unsigned int group)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
u32 mode = 0;
u32 reg = SYSC_REG_GPIO_MODE;
int i;
@@ -158,11 +158,11 @@ static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
return 0;
}
-static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
+static int ralink_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
struct pinctrl_gpio_range *range,
unsigned int pin)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
if (!p->gpio[pin]) {
dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
@@ -172,28 +172,28 @@ static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
return 0;
}
-static const struct pinmux_ops rt2880_pmx_group_ops = {
- .get_functions_count = rt2880_pmx_func_count,
- .get_function_name = rt2880_pmx_func_name,
- .get_function_groups = rt2880_pmx_group_get_groups,
- .set_mux = rt2880_pmx_group_enable,
- .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
+static const struct pinmux_ops ralink_pmx_group_ops = {
+ .get_functions_count = ralink_pmx_func_count,
+ .get_function_name = ralink_pmx_func_name,
+ .get_function_groups = ralink_pmx_group_get_groups,
+ .set_mux = ralink_pmx_group_enable,
+ .gpio_request_enable = ralink_pmx_group_gpio_request_enable,
};
-static struct pinctrl_desc rt2880_pctrl_desc = {
+static struct pinctrl_desc ralink_pctrl_desc = {
.owner = THIS_MODULE,
- .name = "rt2880-pinmux",
- .pctlops = &rt2880_pctrl_ops,
- .pmxops = &rt2880_pmx_group_ops,
+ .name = "ralink-pinmux",
+ .pctlops = &ralink_pctrl_ops,
+ .pmxops = &ralink_pmx_group_ops,
};
-static struct rt2880_pmx_func gpio_func = {
+static struct ralink_pmx_func gpio_func = {
.name = "gpio",
};
-static int rt2880_pinmux_index(struct rt2880_priv *p)
+static int ralink_pinmux_index(struct ralink_priv *p)
{
- struct rt2880_pmx_group *mux = p->groups;
+ struct ralink_pmx_group *mux = p->groups;
int i, j, c = 0;
/* count the mux functions */
@@ -248,7 +248,7 @@ static int rt2880_pinmux_index(struct rt2880_priv *p)
return 0;
}
-static int rt2880_pinmux_pins(struct rt2880_priv *p)
+static int ralink_pinmux_pins(struct ralink_priv *p)
{
int i, j;
@@ -311,10 +311,10 @@ static int rt2880_pinmux_pins(struct rt2880_priv *p)
return 0;
}
-int rt2880_pinmux_init(struct platform_device *pdev,
- struct rt2880_pmx_group *data)
+int ralink_pinmux_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data)
{
- struct rt2880_priv *p;
+ struct ralink_priv *p;
struct pinctrl_dev *dev;
int err;
@@ -322,23 +322,23 @@ int rt2880_pinmux_init(struct platform_device *pdev,
return -ENOTSUPP;
/* setup the private data */
- p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
+ p = devm_kzalloc(&pdev->dev, sizeof(struct ralink_priv), GFP_KERNEL);
if (!p)
return -ENOMEM;
p->dev = &pdev->dev;
- p->desc = &rt2880_pctrl_desc;
+ p->desc = &ralink_pctrl_desc;
p->groups = data;
platform_set_drvdata(pdev, p);
/* init the device */
- err = rt2880_pinmux_index(p);
+ err = ralink_pinmux_index(p);
if (err) {
dev_err(&pdev->dev, "failed to load index\n");
return err;
}
- err = rt2880_pinmux_pins(p);
+ err = ralink_pinmux_pins(p);
if (err) {
dev_err(&pdev->dev, "failed to load pins\n");
return err;
diff --git a/drivers/pinctrl/ralink/pinmux.h b/drivers/pinctrl/ralink/pinctrl-ralink.h
similarity index 75%
rename from drivers/pinctrl/ralink/pinmux.h
rename to drivers/pinctrl/ralink/pinctrl-ralink.h
index 0046abe3bcc7..134969409585 100644
--- a/drivers/pinctrl/ralink/pinmux.h
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.h
@@ -3,8 +3,8 @@
* Copyright (C) 2012 John Crispin <john@phrozen.org>
*/
-#ifndef _RT288X_PINMUX_H__
-#define _RT288X_PINMUX_H__
+#ifndef _PINCTRL_RALINK_H__
+#define _PINCTRL_RALINK_H__
#define FUNC(name, value, pin_first, pin_count) \
{ name, value, pin_first, pin_count }
@@ -19,9 +19,9 @@
.func = _func, .gpio = _gpio, \
.func_count = ARRAY_SIZE(_func) }
-struct rt2880_pmx_group;
+struct ralink_pmx_group;
-struct rt2880_pmx_func {
+struct ralink_pmx_func {
const char *name;
const char value;
@@ -35,7 +35,7 @@ struct rt2880_pmx_func {
int enabled;
};
-struct rt2880_pmx_group {
+struct ralink_pmx_group {
const char *name;
int enabled;
@@ -43,11 +43,11 @@ struct rt2880_pmx_group {
const char mask;
const char gpio;
- struct rt2880_pmx_func *func;
+ struct ralink_pmx_func *func;
int func_count;
};
-int rt2880_pinmux_init(struct platform_device *pdev,
- struct rt2880_pmx_group *data);
+int ralink_pinmux_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data);
#endif
diff --git a/drivers/pinctrl/ralink/pinctrl-rt288x.c b/drivers/pinctrl/ralink/pinctrl-rt288x.c
index 0744aebbace5..40c45140ff8a 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt288x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt288x.c
@@ -4,7 +4,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define RT2880_GPIO_MODE_I2C BIT(0)
#define RT2880_GPIO_MODE_UART0 BIT(1)
@@ -15,15 +15,15 @@
#define RT2880_GPIO_MODE_SDRAM BIT(6)
#define RT2880_GPIO_MODE_PCI BIT(7)
-static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
-static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct ralink_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
+static struct ralink_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
-static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
+static struct ralink_pmx_group rt2880_pinmux_data_act[] = {
GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI),
GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0),
@@ -36,7 +36,7 @@ static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
static int rt288x_pinmux_probe(struct platform_device *pdev)
{
- return rt2880_pinmux_init(pdev, rt2880_pinmux_data_act);
+ return ralink_pinmux_init(pdev, rt2880_pinmux_data_act);
}
static const struct of_device_id rt288x_pinmux_match[] = {
diff --git a/drivers/pinctrl/ralink/pinctrl-rt305x.c b/drivers/pinctrl/ralink/pinctrl-rt305x.c
index 5d8fa156c003..25527ca1ccaa 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt305x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt305x.c
@@ -5,7 +5,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define RT305X_GPIO_MODE_UART0_SHIFT 2
#define RT305X_GPIO_MODE_UART0_MASK 0x7
@@ -31,9 +31,9 @@
#define RT3352_GPIO_MODE_LNA 18
#define RT3352_GPIO_MODE_PA 20
-static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartf_func[] = {
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartf_func[] = {
FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8),
@@ -42,28 +42,28 @@ static struct rt2880_pmx_func uartf_func[] = {
FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
-static struct rt2880_pmx_func rt5350_cs1_func[] = {
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct ralink_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
+static struct ralink_pmx_func rt5350_cs1_func[] = {
FUNC("spi_cs1", 0, 27, 1),
FUNC("wdg_cs1", 1, 27, 1),
};
-static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-static struct rt2880_pmx_func rt3352_rgmii_func[] = {
+static struct ralink_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
+static struct ralink_pmx_func rt3352_rgmii_func[] = {
FUNC("rgmii", 0, 24, 12)
};
-static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
-static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
-static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
-static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
-static struct rt2880_pmx_func rt3352_cs1_func[] = {
+static struct ralink_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
+static struct ralink_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
+static struct ralink_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
+static struct ralink_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
+static struct ralink_pmx_func rt3352_cs1_func[] = {
FUNC("spi_cs1", 0, 45, 1),
FUNC("wdg_cs1", 1, 45, 1),
};
-static struct rt2880_pmx_group rt3050_pinmux_data[] = {
+static struct ralink_pmx_group rt3050_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
@@ -76,7 +76,7 @@ static struct rt2880_pmx_group rt3050_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_group rt3352_pinmux_data[] = {
+static struct ralink_pmx_group rt3352_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
@@ -92,7 +92,7 @@ static struct rt2880_pmx_group rt3352_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_group rt5350_pinmux_data[] = {
+static struct ralink_pmx_group rt5350_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
@@ -107,11 +107,11 @@ static struct rt2880_pmx_group rt5350_pinmux_data[] = {
static int rt305x_pinmux_probe(struct platform_device *pdev)
{
if (soc_is_rt5350())
- return rt2880_pinmux_init(pdev, rt5350_pinmux_data);
+ return ralink_pinmux_init(pdev, rt5350_pinmux_data);
else if (soc_is_rt305x() || soc_is_rt3350())
- return rt2880_pinmux_init(pdev, rt3050_pinmux_data);
+ return ralink_pinmux_init(pdev, rt3050_pinmux_data);
else if (soc_is_rt3352())
- return rt2880_pinmux_init(pdev, rt3352_pinmux_data);
+ return ralink_pinmux_init(pdev, rt3352_pinmux_data);
else
return -EINVAL;
}
diff --git a/drivers/pinctrl/ralink/pinctrl-rt3883.c b/drivers/pinctrl/ralink/pinctrl-rt3883.c
index 3e0e1b4caa64..0b8674dbe188 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt3883.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt3883.c
@@ -3,7 +3,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define RT3883_GPIO_MODE_UART0_SHIFT 2
#define RT3883_GPIO_MODE_UART0_MASK 0x7
@@ -39,9 +39,9 @@
#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3
#define RT3883_GPIO_MODE_LNA_G _RT3883_GPIO_MODE_LNA_G(RT3883_GPIO_MODE_LNA_G_MASK)
-static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartf_func[] = {
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartf_func[] = {
FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8),
@@ -50,21 +50,21 @@ static struct rt2880_pmx_func uartf_func[] = {
FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
-static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
-static struct rt2880_pmx_func pci_func[] = {
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct ralink_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
+static struct ralink_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
+static struct ralink_pmx_func pci_func[] = {
FUNC("pci-dev", 0, 40, 32),
FUNC("pci-host2", 1, 40, 32),
FUNC("pci-host1", 2, 40, 32),
FUNC("pci-fnc", 3, 40, 32)
};
-static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
-static struct rt2880_pmx_func ge2_func[] = { FUNC("ge2", 0, 84, 12) };
+static struct ralink_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
+static struct ralink_pmx_func ge2_func[] = { FUNC("ge2", 0, 84, 12) };
-static struct rt2880_pmx_group rt3883_pinmux_data[] = {
+static struct ralink_pmx_group rt3883_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK,
@@ -83,7 +83,7 @@ static struct rt2880_pmx_group rt3883_pinmux_data[] = {
static int rt3883_pinmux_probe(struct platform_device *pdev)
{
- return rt2880_pinmux_init(pdev, rt3883_pinmux_data);
+ return ralink_pinmux_init(pdev, rt3883_pinmux_data);
}
static const struct of_device_id rt3883_pinmux_match[] = {
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 02/14] pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
pinctrl-rt2880.c and pinmux.h make up the Ralink pinctrl driver. Rename
pinctrl-rt2880.c to pinctrl-ralink.c. Rename pinmux.h to pinctrl-ralink.h.
Fix references to it. Rename functions that include "rt2880" to "ralink".
Remove PINCTRL_RT2880 symbol and make the existing PINCTRL_RALINK symbol
compile pinctrl-ralink.c. Change the bool to "Ralink pinctrl driver".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/Kconfig | 16 ++--
drivers/pinctrl/ralink/Makefile | 2 +-
drivers/pinctrl/ralink/pinctrl-mt7620.c | 92 +++++++++----------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 30 +++---
.../{pinctrl-rt2880.c => pinctrl-ralink.c} | 90 +++++++++---------
.../ralink/{pinmux.h => pinctrl-ralink.h} | 16 ++--
drivers/pinctrl/ralink/pinctrl-rt288x.c | 20 ++--
drivers/pinctrl/ralink/pinctrl-rt305x.c | 44 ++++-----
drivers/pinctrl/ralink/pinctrl-rt3883.c | 28 +++---
9 files changed, 167 insertions(+), 171 deletions(-)
rename drivers/pinctrl/ralink/{pinctrl-rt2880.c => pinctrl-ralink.c} (73%)
rename drivers/pinctrl/ralink/{pinmux.h => pinctrl-ralink.h} (75%)
diff --git a/drivers/pinctrl/ralink/Kconfig b/drivers/pinctrl/ralink/Kconfig
index a76ee3deb8c3..d0f0a8f2b9b7 100644
--- a/drivers/pinctrl/ralink/Kconfig
+++ b/drivers/pinctrl/ralink/Kconfig
@@ -3,37 +3,33 @@ menu "Ralink pinctrl drivers"
depends on RALINK
config PINCTRL_RALINK
- bool "Ralink pin control support"
- default y if RALINK
-
-config PINCTRL_RT2880
- bool "RT2880 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "Ralink pinctrl driver"
select PINMUX
select GENERIC_PINCONF
config PINCTRL_MT7620
bool "mt7620 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_MT7620
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_MT7621
bool "mt7621 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_MT7621
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_RT288X
bool "RT288X pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT288X
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_RT305X
bool "RT305X pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT305X
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_RT3883
bool "RT3883 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT3883
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
endmenu
diff --git a/drivers/pinctrl/ralink/Makefile b/drivers/pinctrl/ralink/Makefile
index a15610206ced..2c1323b74e96 100644
--- a/drivers/pinctrl/ralink/Makefile
+++ b/drivers/pinctrl/ralink/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
+obj-$(CONFIG_PINCTRL_RALINK) += pinctrl-ralink.o
obj-$(CONFIG_PINCTRL_MT7620) += pinctrl-mt7620.o
obj-$(CONFIG_PINCTRL_MT7621) += pinctrl-mt7621.o
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index d3f9feec1f74..51b863d85c51 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -5,7 +5,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define MT7620_GPIO_MODE_UART0_SHIFT 2
#define MT7620_GPIO_MODE_UART0_MASK 0x7
@@ -54,20 +54,20 @@
#define MT7620_GPIO_MODE_EPHY 15
#define MT7620_GPIO_MODE_PA 20
-static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
-static struct rt2880_pmx_func mdio_grp[] = {
+static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func mdio_grp[] = {
FUNC("mdio", MT7620_GPIO_MODE_MDIO, 22, 2),
FUNC("refclk", MT7620_GPIO_MODE_MDIO_REFCLK, 22, 2),
};
-static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
-static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
-static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
-static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
-static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
-static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
-static struct rt2880_pmx_func uartf_grp[] = {
+static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
+static struct ralink_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
+static struct ralink_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
+static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
+static struct ralink_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
+static struct ralink_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
+static struct ralink_pmx_func uartf_grp[] = {
FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
@@ -76,20 +76,20 @@ static struct rt2880_pmx_func uartf_grp[] = {
FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct rt2880_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func wdt_grp[] = {
FUNC("wdt rst", 0, 17, 1),
FUNC("wdt refclk", 0, 17, 1),
};
-static struct rt2880_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_grp[] = {
FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
};
-static struct rt2880_pmx_func nd_sd_grp[] = {
+static struct ralink_pmx_func nd_sd_grp[] = {
FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
};
-static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
+static struct ralink_pmx_group mt7620a_pinmux_data[] = {
GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
MT7620_GPIO_MODE_UART0_SHIFT),
@@ -112,166 +112,166 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_func pwm1_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm1_grp_mt76x8[] = {
FUNC("sdxc d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
FUNC("pwm1", 0, 19, 1),
};
-static struct rt2880_pmx_func pwm0_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm0_grp_mt76x8[] = {
FUNC("sdxc d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
FUNC("pwm0", 0, 18, 1),
};
-static struct rt2880_pmx_func uart2_grp_mt76x8[] = {
+static struct ralink_pmx_func uart2_grp_mt76x8[] = {
FUNC("sdxc d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
FUNC("uart2", 0, 20, 2),
};
-static struct rt2880_pmx_func uart1_grp_mt76x8[] = {
+static struct ralink_pmx_func uart1_grp_mt76x8[] = {
FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
FUNC("uart1", 0, 45, 2),
};
-static struct rt2880_pmx_func i2c_grp_mt76x8[] = {
+static struct ralink_pmx_func i2c_grp_mt76x8[] = {
FUNC("-", 3, 4, 2),
FUNC("debug", 2, 4, 2),
FUNC("gpio", 1, 4, 2),
FUNC("i2c", 0, 4, 2),
};
-static struct rt2880_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
-static struct rt2880_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
-static struct rt2880_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
-static struct rt2880_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
+static struct ralink_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
+static struct ralink_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
+static struct ralink_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
+static struct ralink_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
-static struct rt2880_pmx_func sd_mode_grp_mt76x8[] = {
+static struct ralink_pmx_func sd_mode_grp_mt76x8[] = {
FUNC("jtag", 3, 22, 8),
FUNC("utif", 2, 22, 8),
FUNC("gpio", 1, 22, 8),
FUNC("sdxc", 0, 22, 8),
};
-static struct rt2880_pmx_func uart0_grp_mt76x8[] = {
+static struct ralink_pmx_func uart0_grp_mt76x8[] = {
FUNC("-", 3, 12, 2),
FUNC("-", 2, 12, 2),
FUNC("gpio", 1, 12, 2),
FUNC("uart0", 0, 12, 2),
};
-static struct rt2880_pmx_func i2s_grp_mt76x8[] = {
+static struct ralink_pmx_func i2s_grp_mt76x8[] = {
FUNC("antenna", 3, 0, 4),
FUNC("pcm", 2, 0, 4),
FUNC("gpio", 1, 0, 4),
FUNC("i2s", 0, 0, 4),
};
-static struct rt2880_pmx_func spi_cs1_grp_mt76x8[] = {
+static struct ralink_pmx_func spi_cs1_grp_mt76x8[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
FUNC("spi cs1", 0, 6, 1),
};
-static struct rt2880_pmx_func spis_grp_mt76x8[] = {
+static struct ralink_pmx_func spis_grp_mt76x8[] = {
FUNC("pwm_uart2", 3, 14, 4),
FUNC("utif", 2, 14, 4),
FUNC("gpio", 1, 14, 4),
FUNC("spis", 0, 14, 4),
};
-static struct rt2880_pmx_func gpio_grp_mt76x8[] = {
+static struct ralink_pmx_func gpio_grp_mt76x8[] = {
FUNC("pcie", 3, 11, 1),
FUNC("refclk", 2, 11, 1),
FUNC("gpio", 1, 11, 1),
FUNC("gpio", 0, 11, 1),
};
-static struct rt2880_pmx_func p4led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 30, 1),
FUNC("utif", 2, 30, 1),
FUNC("gpio", 1, 30, 1),
FUNC("p4led_kn", 0, 30, 1),
};
-static struct rt2880_pmx_func p3led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 31, 1),
FUNC("utif", 2, 31, 1),
FUNC("gpio", 1, 31, 1),
FUNC("p3led_kn", 0, 31, 1),
};
-static struct rt2880_pmx_func p2led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 32, 1),
FUNC("utif", 2, 32, 1),
FUNC("gpio", 1, 32, 1),
FUNC("p2led_kn", 0, 32, 1),
};
-static struct rt2880_pmx_func p1led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 33, 1),
FUNC("utif", 2, 33, 1),
FUNC("gpio", 1, 33, 1),
FUNC("p1led_kn", 0, 33, 1),
};
-static struct rt2880_pmx_func p0led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 34, 1),
FUNC("rsvd", 2, 34, 1),
FUNC("gpio", 1, 34, 1),
FUNC("p0led_kn", 0, 34, 1),
};
-static struct rt2880_pmx_func wled_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_kn_grp_mt76x8[] = {
FUNC("rsvd", 3, 35, 1),
FUNC("rsvd", 2, 35, 1),
FUNC("gpio", 1, 35, 1),
FUNC("wled_kn", 0, 35, 1),
};
-static struct rt2880_pmx_func p4led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 39, 1),
FUNC("utif", 2, 39, 1),
FUNC("gpio", 1, 39, 1),
FUNC("p4led_an", 0, 39, 1),
};
-static struct rt2880_pmx_func p3led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 40, 1),
FUNC("utif", 2, 40, 1),
FUNC("gpio", 1, 40, 1),
FUNC("p3led_an", 0, 40, 1),
};
-static struct rt2880_pmx_func p2led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 41, 1),
FUNC("utif", 2, 41, 1),
FUNC("gpio", 1, 41, 1),
FUNC("p2led_an", 0, 41, 1),
};
-static struct rt2880_pmx_func p1led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 42, 1),
FUNC("utif", 2, 42, 1),
FUNC("gpio", 1, 42, 1),
FUNC("p1led_an", 0, 42, 1),
};
-static struct rt2880_pmx_func p0led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 43, 1),
FUNC("rsvd", 2, 43, 1),
FUNC("gpio", 1, 43, 1),
FUNC("p0led_an", 0, 43, 1),
};
-static struct rt2880_pmx_func wled_an_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_an_grp_mt76x8[] = {
FUNC("rsvd", 3, 44, 1),
FUNC("rsvd", 2, 44, 1),
FUNC("gpio", 1, 44, 1),
@@ -308,7 +308,7 @@ static struct rt2880_pmx_func wled_an_grp_mt76x8[] = {
#define MT76X8_GPIO_MODE_SPIS 2
#define MT76X8_GPIO_MODE_GPIO 0
-static struct rt2880_pmx_group mt76x8_pinmux_data[] = {
+static struct ralink_pmx_group mt76x8_pinmux_data[] = {
GRP_G("pwm1", pwm1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_PWM1),
GRP_G("pwm0", pwm0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
@@ -365,9 +365,9 @@ static struct rt2880_pmx_group mt76x8_pinmux_data[] = {
static int mt7620_pinmux_probe(struct platform_device *pdev)
{
if (is_mt76x8())
- return rt2880_pinmux_init(pdev, mt76x8_pinmux_data);
+ return ralink_pinmux_init(pdev, mt76x8_pinmux_data);
else
- return rt2880_pinmux_init(pdev, mt7620a_pinmux_data);
+ return ralink_pinmux_init(pdev, mt7620a_pinmux_data);
}
static const struct of_device_id mt7620_pinmux_match[] = {
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index 7d96144c474e..14b89cb43d4c 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -3,7 +3,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define MT7621_GPIO_MODE_UART1 1
#define MT7621_GPIO_MODE_I2C 2
@@ -34,40 +34,40 @@
#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
#define MT7621_GPIO_MODE_SDHCI_GPIO 1
-static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
-static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
-static struct rt2880_pmx_func uart3_grp[] = {
+static struct ralink_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
+static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
+static struct ralink_pmx_func uart3_grp[] = {
FUNC("uart3", 0, 5, 4),
FUNC("i2s", 2, 5, 4),
FUNC("spdif3", 3, 5, 4),
};
-static struct rt2880_pmx_func uart2_grp[] = {
+static struct ralink_pmx_func uart2_grp[] = {
FUNC("uart2", 0, 9, 4),
FUNC("pcm", 2, 9, 4),
FUNC("spdif2", 3, 9, 4),
};
-static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
-static struct rt2880_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
+static struct ralink_pmx_func wdt_grp[] = {
FUNC("wdt rst", 0, 18, 1),
FUNC("wdt refclk", 2, 18, 1),
};
-static struct rt2880_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_grp[] = {
FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
};
-static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
-static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
-static struct rt2880_pmx_func spi_grp[] = {
+static struct ralink_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
+static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct ralink_pmx_func spi_grp[] = {
FUNC("spi", 0, 34, 7),
FUNC("nand1", 2, 34, 7),
};
-static struct rt2880_pmx_func sdhci_grp[] = {
+static struct ralink_pmx_func sdhci_grp[] = {
FUNC("sdhci", 0, 41, 8),
FUNC("nand2", 2, 41, 8),
};
-static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
-static struct rt2880_pmx_group mt7621_pinmux_data[] = {
+static struct ralink_pmx_group mt7621_pinmux_data[] = {
GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
@@ -92,7 +92,7 @@ static struct rt2880_pmx_group mt7621_pinmux_data[] = {
static int mt7621_pinmux_probe(struct platform_device *pdev)
{
- return rt2880_pinmux_init(pdev, mt7621_pinmux_data);
+ return ralink_pinmux_init(pdev, mt7621_pinmux_data);
}
static const struct of_device_id mt7621_pinmux_match[] = {
diff --git a/drivers/pinctrl/ralink/pinctrl-rt2880.c b/drivers/pinctrl/ralink/pinctrl-ralink.c
similarity index 73%
rename from drivers/pinctrl/ralink/pinctrl-rt2880.c
rename to drivers/pinctrl/ralink/pinctrl-ralink.c
index 96fc06d1b8b9..841f23f55c95 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt2880.c
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.c
@@ -19,23 +19,23 @@
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/mt7620.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#include "../core.h"
#include "../pinctrl-utils.h"
#define SYSC_REG_GPIO_MODE 0x60
#define SYSC_REG_GPIO_MODE2 0x64
-struct rt2880_priv {
+struct ralink_priv {
struct device *dev;
struct pinctrl_pin_desc *pads;
struct pinctrl_desc *desc;
- struct rt2880_pmx_func **func;
+ struct ralink_pmx_func **func;
int func_count;
- struct rt2880_pmx_group *groups;
+ struct ralink_pmx_group *groups;
const char **group_names;
int group_count;
@@ -43,27 +43,27 @@ struct rt2880_priv {
int max_pins;
};
-static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
+static int ralink_get_group_count(struct pinctrl_dev *pctrldev)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return p->group_count;
}
-static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
+static const char *ralink_get_group_name(struct pinctrl_dev *pctrldev,
unsigned int group)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return (group >= p->group_count) ? NULL : p->group_names[group];
}
-static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
+static int ralink_get_group_pins(struct pinctrl_dev *pctrldev,
unsigned int group,
const unsigned int **pins,
unsigned int *num_pins)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
if (group >= p->group_count)
return -EINVAL;
@@ -74,35 +74,35 @@ static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
return 0;
}
-static const struct pinctrl_ops rt2880_pctrl_ops = {
- .get_groups_count = rt2880_get_group_count,
- .get_group_name = rt2880_get_group_name,
- .get_group_pins = rt2880_get_group_pins,
+static const struct pinctrl_ops ralink_pctrl_ops = {
+ .get_groups_count = ralink_get_group_count,
+ .get_group_name = ralink_get_group_name,
+ .get_group_pins = ralink_get_group_pins,
.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
.dt_free_map = pinconf_generic_dt_free_map,
};
-static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
+static int ralink_pmx_func_count(struct pinctrl_dev *pctrldev)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return p->func_count;
}
-static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
+static const char *ralink_pmx_func_name(struct pinctrl_dev *pctrldev,
unsigned int func)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return p->func[func]->name;
}
-static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
+static int ralink_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
unsigned int func,
const char * const **groups,
unsigned int * const num_groups)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
if (p->func[func]->group_count == 1)
*groups = &p->group_names[p->func[func]->groups[0]];
@@ -114,10 +114,10 @@ static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
return 0;
}
-static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
+static int ralink_pmx_group_enable(struct pinctrl_dev *pctrldev,
unsigned int func, unsigned int group)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
u32 mode = 0;
u32 reg = SYSC_REG_GPIO_MODE;
int i;
@@ -158,11 +158,11 @@ static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
return 0;
}
-static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
+static int ralink_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
struct pinctrl_gpio_range *range,
unsigned int pin)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
if (!p->gpio[pin]) {
dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
@@ -172,28 +172,28 @@ static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
return 0;
}
-static const struct pinmux_ops rt2880_pmx_group_ops = {
- .get_functions_count = rt2880_pmx_func_count,
- .get_function_name = rt2880_pmx_func_name,
- .get_function_groups = rt2880_pmx_group_get_groups,
- .set_mux = rt2880_pmx_group_enable,
- .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
+static const struct pinmux_ops ralink_pmx_group_ops = {
+ .get_functions_count = ralink_pmx_func_count,
+ .get_function_name = ralink_pmx_func_name,
+ .get_function_groups = ralink_pmx_group_get_groups,
+ .set_mux = ralink_pmx_group_enable,
+ .gpio_request_enable = ralink_pmx_group_gpio_request_enable,
};
-static struct pinctrl_desc rt2880_pctrl_desc = {
+static struct pinctrl_desc ralink_pctrl_desc = {
.owner = THIS_MODULE,
- .name = "rt2880-pinmux",
- .pctlops = &rt2880_pctrl_ops,
- .pmxops = &rt2880_pmx_group_ops,
+ .name = "ralink-pinmux",
+ .pctlops = &ralink_pctrl_ops,
+ .pmxops = &ralink_pmx_group_ops,
};
-static struct rt2880_pmx_func gpio_func = {
+static struct ralink_pmx_func gpio_func = {
.name = "gpio",
};
-static int rt2880_pinmux_index(struct rt2880_priv *p)
+static int ralink_pinmux_index(struct ralink_priv *p)
{
- struct rt2880_pmx_group *mux = p->groups;
+ struct ralink_pmx_group *mux = p->groups;
int i, j, c = 0;
/* count the mux functions */
@@ -248,7 +248,7 @@ static int rt2880_pinmux_index(struct rt2880_priv *p)
return 0;
}
-static int rt2880_pinmux_pins(struct rt2880_priv *p)
+static int ralink_pinmux_pins(struct ralink_priv *p)
{
int i, j;
@@ -311,10 +311,10 @@ static int rt2880_pinmux_pins(struct rt2880_priv *p)
return 0;
}
-int rt2880_pinmux_init(struct platform_device *pdev,
- struct rt2880_pmx_group *data)
+int ralink_pinmux_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data)
{
- struct rt2880_priv *p;
+ struct ralink_priv *p;
struct pinctrl_dev *dev;
int err;
@@ -322,23 +322,23 @@ int rt2880_pinmux_init(struct platform_device *pdev,
return -ENOTSUPP;
/* setup the private data */
- p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
+ p = devm_kzalloc(&pdev->dev, sizeof(struct ralink_priv), GFP_KERNEL);
if (!p)
return -ENOMEM;
p->dev = &pdev->dev;
- p->desc = &rt2880_pctrl_desc;
+ p->desc = &ralink_pctrl_desc;
p->groups = data;
platform_set_drvdata(pdev, p);
/* init the device */
- err = rt2880_pinmux_index(p);
+ err = ralink_pinmux_index(p);
if (err) {
dev_err(&pdev->dev, "failed to load index\n");
return err;
}
- err = rt2880_pinmux_pins(p);
+ err = ralink_pinmux_pins(p);
if (err) {
dev_err(&pdev->dev, "failed to load pins\n");
return err;
diff --git a/drivers/pinctrl/ralink/pinmux.h b/drivers/pinctrl/ralink/pinctrl-ralink.h
similarity index 75%
rename from drivers/pinctrl/ralink/pinmux.h
rename to drivers/pinctrl/ralink/pinctrl-ralink.h
index 0046abe3bcc7..134969409585 100644
--- a/drivers/pinctrl/ralink/pinmux.h
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.h
@@ -3,8 +3,8 @@
* Copyright (C) 2012 John Crispin <john@phrozen.org>
*/
-#ifndef _RT288X_PINMUX_H__
-#define _RT288X_PINMUX_H__
+#ifndef _PINCTRL_RALINK_H__
+#define _PINCTRL_RALINK_H__
#define FUNC(name, value, pin_first, pin_count) \
{ name, value, pin_first, pin_count }
@@ -19,9 +19,9 @@
.func = _func, .gpio = _gpio, \
.func_count = ARRAY_SIZE(_func) }
-struct rt2880_pmx_group;
+struct ralink_pmx_group;
-struct rt2880_pmx_func {
+struct ralink_pmx_func {
const char *name;
const char value;
@@ -35,7 +35,7 @@ struct rt2880_pmx_func {
int enabled;
};
-struct rt2880_pmx_group {
+struct ralink_pmx_group {
const char *name;
int enabled;
@@ -43,11 +43,11 @@ struct rt2880_pmx_group {
const char mask;
const char gpio;
- struct rt2880_pmx_func *func;
+ struct ralink_pmx_func *func;
int func_count;
};
-int rt2880_pinmux_init(struct platform_device *pdev,
- struct rt2880_pmx_group *data);
+int ralink_pinmux_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data);
#endif
diff --git a/drivers/pinctrl/ralink/pinctrl-rt288x.c b/drivers/pinctrl/ralink/pinctrl-rt288x.c
index 0744aebbace5..40c45140ff8a 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt288x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt288x.c
@@ -4,7 +4,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define RT2880_GPIO_MODE_I2C BIT(0)
#define RT2880_GPIO_MODE_UART0 BIT(1)
@@ -15,15 +15,15 @@
#define RT2880_GPIO_MODE_SDRAM BIT(6)
#define RT2880_GPIO_MODE_PCI BIT(7)
-static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
-static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct ralink_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
+static struct ralink_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
-static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
+static struct ralink_pmx_group rt2880_pinmux_data_act[] = {
GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI),
GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0),
@@ -36,7 +36,7 @@ static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
static int rt288x_pinmux_probe(struct platform_device *pdev)
{
- return rt2880_pinmux_init(pdev, rt2880_pinmux_data_act);
+ return ralink_pinmux_init(pdev, rt2880_pinmux_data_act);
}
static const struct of_device_id rt288x_pinmux_match[] = {
diff --git a/drivers/pinctrl/ralink/pinctrl-rt305x.c b/drivers/pinctrl/ralink/pinctrl-rt305x.c
index 5d8fa156c003..25527ca1ccaa 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt305x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt305x.c
@@ -5,7 +5,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define RT305X_GPIO_MODE_UART0_SHIFT 2
#define RT305X_GPIO_MODE_UART0_MASK 0x7
@@ -31,9 +31,9 @@
#define RT3352_GPIO_MODE_LNA 18
#define RT3352_GPIO_MODE_PA 20
-static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartf_func[] = {
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartf_func[] = {
FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8),
@@ -42,28 +42,28 @@ static struct rt2880_pmx_func uartf_func[] = {
FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
-static struct rt2880_pmx_func rt5350_cs1_func[] = {
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct ralink_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
+static struct ralink_pmx_func rt5350_cs1_func[] = {
FUNC("spi_cs1", 0, 27, 1),
FUNC("wdg_cs1", 1, 27, 1),
};
-static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-static struct rt2880_pmx_func rt3352_rgmii_func[] = {
+static struct ralink_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
+static struct ralink_pmx_func rt3352_rgmii_func[] = {
FUNC("rgmii", 0, 24, 12)
};
-static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
-static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
-static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
-static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
-static struct rt2880_pmx_func rt3352_cs1_func[] = {
+static struct ralink_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
+static struct ralink_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
+static struct ralink_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
+static struct ralink_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
+static struct ralink_pmx_func rt3352_cs1_func[] = {
FUNC("spi_cs1", 0, 45, 1),
FUNC("wdg_cs1", 1, 45, 1),
};
-static struct rt2880_pmx_group rt3050_pinmux_data[] = {
+static struct ralink_pmx_group rt3050_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
@@ -76,7 +76,7 @@ static struct rt2880_pmx_group rt3050_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_group rt3352_pinmux_data[] = {
+static struct ralink_pmx_group rt3352_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
@@ -92,7 +92,7 @@ static struct rt2880_pmx_group rt3352_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_group rt5350_pinmux_data[] = {
+static struct ralink_pmx_group rt5350_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
@@ -107,11 +107,11 @@ static struct rt2880_pmx_group rt5350_pinmux_data[] = {
static int rt305x_pinmux_probe(struct platform_device *pdev)
{
if (soc_is_rt5350())
- return rt2880_pinmux_init(pdev, rt5350_pinmux_data);
+ return ralink_pinmux_init(pdev, rt5350_pinmux_data);
else if (soc_is_rt305x() || soc_is_rt3350())
- return rt2880_pinmux_init(pdev, rt3050_pinmux_data);
+ return ralink_pinmux_init(pdev, rt3050_pinmux_data);
else if (soc_is_rt3352())
- return rt2880_pinmux_init(pdev, rt3352_pinmux_data);
+ return ralink_pinmux_init(pdev, rt3352_pinmux_data);
else
return -EINVAL;
}
diff --git a/drivers/pinctrl/ralink/pinctrl-rt3883.c b/drivers/pinctrl/ralink/pinctrl-rt3883.c
index 3e0e1b4caa64..0b8674dbe188 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt3883.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt3883.c
@@ -3,7 +3,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define RT3883_GPIO_MODE_UART0_SHIFT 2
#define RT3883_GPIO_MODE_UART0_MASK 0x7
@@ -39,9 +39,9 @@
#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3
#define RT3883_GPIO_MODE_LNA_G _RT3883_GPIO_MODE_LNA_G(RT3883_GPIO_MODE_LNA_G_MASK)
-static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartf_func[] = {
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartf_func[] = {
FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8),
@@ -50,21 +50,21 @@ static struct rt2880_pmx_func uartf_func[] = {
FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
-static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
-static struct rt2880_pmx_func pci_func[] = {
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct ralink_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
+static struct ralink_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
+static struct ralink_pmx_func pci_func[] = {
FUNC("pci-dev", 0, 40, 32),
FUNC("pci-host2", 1, 40, 32),
FUNC("pci-host1", 2, 40, 32),
FUNC("pci-fnc", 3, 40, 32)
};
-static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
-static struct rt2880_pmx_func ge2_func[] = { FUNC("ge2", 0, 84, 12) };
+static struct ralink_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
+static struct ralink_pmx_func ge2_func[] = { FUNC("ge2", 0, 84, 12) };
-static struct rt2880_pmx_group rt3883_pinmux_data[] = {
+static struct ralink_pmx_group rt3883_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK,
@@ -83,7 +83,7 @@ static struct rt2880_pmx_group rt3883_pinmux_data[] = {
static int rt3883_pinmux_probe(struct platform_device *pdev)
{
- return rt2880_pinmux_init(pdev, rt3883_pinmux_data);
+ return ralink_pinmux_init(pdev, rt3883_pinmux_data);
}
static const struct of_device_id rt3883_pinmux_match[] = {
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 02/14] pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
pinctrl-rt2880.c and pinmux.h make up the Ralink pinctrl driver. Rename
pinctrl-rt2880.c to pinctrl-ralink.c. Rename pinmux.h to pinctrl-ralink.h.
Fix references to it. Rename functions that include "rt2880" to "ralink".
Remove PINCTRL_RT2880 symbol and make the existing PINCTRL_RALINK symbol
compile pinctrl-ralink.c. Change the bool to "Ralink pinctrl driver".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/Kconfig | 16 ++--
drivers/pinctrl/ralink/Makefile | 2 +-
drivers/pinctrl/ralink/pinctrl-mt7620.c | 92 +++++++++----------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 30 +++---
.../{pinctrl-rt2880.c => pinctrl-ralink.c} | 90 +++++++++---------
.../ralink/{pinmux.h => pinctrl-ralink.h} | 16 ++--
drivers/pinctrl/ralink/pinctrl-rt288x.c | 20 ++--
drivers/pinctrl/ralink/pinctrl-rt305x.c | 44 ++++-----
drivers/pinctrl/ralink/pinctrl-rt3883.c | 28 +++---
9 files changed, 167 insertions(+), 171 deletions(-)
rename drivers/pinctrl/ralink/{pinctrl-rt2880.c => pinctrl-ralink.c} (73%)
rename drivers/pinctrl/ralink/{pinmux.h => pinctrl-ralink.h} (75%)
diff --git a/drivers/pinctrl/ralink/Kconfig b/drivers/pinctrl/ralink/Kconfig
index a76ee3deb8c3..d0f0a8f2b9b7 100644
--- a/drivers/pinctrl/ralink/Kconfig
+++ b/drivers/pinctrl/ralink/Kconfig
@@ -3,37 +3,33 @@ menu "Ralink pinctrl drivers"
depends on RALINK
config PINCTRL_RALINK
- bool "Ralink pin control support"
- default y if RALINK
-
-config PINCTRL_RT2880
- bool "RT2880 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "Ralink pinctrl driver"
select PINMUX
select GENERIC_PINCONF
config PINCTRL_MT7620
bool "mt7620 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_MT7620
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_MT7621
bool "mt7621 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_MT7621
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_RT288X
bool "RT288X pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT288X
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_RT305X
bool "RT305X pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT305X
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
config PINCTRL_RT3883
bool "RT3883 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT3883
- select PINCTRL_RT2880
+ select PINCTRL_RALINK
endmenu
diff --git a/drivers/pinctrl/ralink/Makefile b/drivers/pinctrl/ralink/Makefile
index a15610206ced..2c1323b74e96 100644
--- a/drivers/pinctrl/ralink/Makefile
+++ b/drivers/pinctrl/ralink/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
+obj-$(CONFIG_PINCTRL_RALINK) += pinctrl-ralink.o
obj-$(CONFIG_PINCTRL_MT7620) += pinctrl-mt7620.o
obj-$(CONFIG_PINCTRL_MT7621) += pinctrl-mt7621.o
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index d3f9feec1f74..51b863d85c51 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -5,7 +5,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define MT7620_GPIO_MODE_UART0_SHIFT 2
#define MT7620_GPIO_MODE_UART0_MASK 0x7
@@ -54,20 +54,20 @@
#define MT7620_GPIO_MODE_EPHY 15
#define MT7620_GPIO_MODE_PA 20
-static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
-static struct rt2880_pmx_func mdio_grp[] = {
+static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func mdio_grp[] = {
FUNC("mdio", MT7620_GPIO_MODE_MDIO, 22, 2),
FUNC("refclk", MT7620_GPIO_MODE_MDIO_REFCLK, 22, 2),
};
-static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
-static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
-static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
-static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
-static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
-static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
-static struct rt2880_pmx_func uartf_grp[] = {
+static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
+static struct ralink_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
+static struct ralink_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
+static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
+static struct ralink_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
+static struct ralink_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
+static struct ralink_pmx_func uartf_grp[] = {
FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
@@ -76,20 +76,20 @@ static struct rt2880_pmx_func uartf_grp[] = {
FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct rt2880_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func wdt_grp[] = {
FUNC("wdt rst", 0, 17, 1),
FUNC("wdt refclk", 0, 17, 1),
};
-static struct rt2880_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_grp[] = {
FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
};
-static struct rt2880_pmx_func nd_sd_grp[] = {
+static struct ralink_pmx_func nd_sd_grp[] = {
FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
};
-static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
+static struct ralink_pmx_group mt7620a_pinmux_data[] = {
GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
MT7620_GPIO_MODE_UART0_SHIFT),
@@ -112,166 +112,166 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_func pwm1_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm1_grp_mt76x8[] = {
FUNC("sdxc d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
FUNC("pwm1", 0, 19, 1),
};
-static struct rt2880_pmx_func pwm0_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm0_grp_mt76x8[] = {
FUNC("sdxc d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
FUNC("pwm0", 0, 18, 1),
};
-static struct rt2880_pmx_func uart2_grp_mt76x8[] = {
+static struct ralink_pmx_func uart2_grp_mt76x8[] = {
FUNC("sdxc d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
FUNC("uart2", 0, 20, 2),
};
-static struct rt2880_pmx_func uart1_grp_mt76x8[] = {
+static struct ralink_pmx_func uart1_grp_mt76x8[] = {
FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
FUNC("uart1", 0, 45, 2),
};
-static struct rt2880_pmx_func i2c_grp_mt76x8[] = {
+static struct ralink_pmx_func i2c_grp_mt76x8[] = {
FUNC("-", 3, 4, 2),
FUNC("debug", 2, 4, 2),
FUNC("gpio", 1, 4, 2),
FUNC("i2c", 0, 4, 2),
};
-static struct rt2880_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
-static struct rt2880_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
-static struct rt2880_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
-static struct rt2880_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
+static struct ralink_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
+static struct ralink_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
+static struct ralink_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
+static struct ralink_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
-static struct rt2880_pmx_func sd_mode_grp_mt76x8[] = {
+static struct ralink_pmx_func sd_mode_grp_mt76x8[] = {
FUNC("jtag", 3, 22, 8),
FUNC("utif", 2, 22, 8),
FUNC("gpio", 1, 22, 8),
FUNC("sdxc", 0, 22, 8),
};
-static struct rt2880_pmx_func uart0_grp_mt76x8[] = {
+static struct ralink_pmx_func uart0_grp_mt76x8[] = {
FUNC("-", 3, 12, 2),
FUNC("-", 2, 12, 2),
FUNC("gpio", 1, 12, 2),
FUNC("uart0", 0, 12, 2),
};
-static struct rt2880_pmx_func i2s_grp_mt76x8[] = {
+static struct ralink_pmx_func i2s_grp_mt76x8[] = {
FUNC("antenna", 3, 0, 4),
FUNC("pcm", 2, 0, 4),
FUNC("gpio", 1, 0, 4),
FUNC("i2s", 0, 0, 4),
};
-static struct rt2880_pmx_func spi_cs1_grp_mt76x8[] = {
+static struct ralink_pmx_func spi_cs1_grp_mt76x8[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
FUNC("spi cs1", 0, 6, 1),
};
-static struct rt2880_pmx_func spis_grp_mt76x8[] = {
+static struct ralink_pmx_func spis_grp_mt76x8[] = {
FUNC("pwm_uart2", 3, 14, 4),
FUNC("utif", 2, 14, 4),
FUNC("gpio", 1, 14, 4),
FUNC("spis", 0, 14, 4),
};
-static struct rt2880_pmx_func gpio_grp_mt76x8[] = {
+static struct ralink_pmx_func gpio_grp_mt76x8[] = {
FUNC("pcie", 3, 11, 1),
FUNC("refclk", 2, 11, 1),
FUNC("gpio", 1, 11, 1),
FUNC("gpio", 0, 11, 1),
};
-static struct rt2880_pmx_func p4led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 30, 1),
FUNC("utif", 2, 30, 1),
FUNC("gpio", 1, 30, 1),
FUNC("p4led_kn", 0, 30, 1),
};
-static struct rt2880_pmx_func p3led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 31, 1),
FUNC("utif", 2, 31, 1),
FUNC("gpio", 1, 31, 1),
FUNC("p3led_kn", 0, 31, 1),
};
-static struct rt2880_pmx_func p2led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 32, 1),
FUNC("utif", 2, 32, 1),
FUNC("gpio", 1, 32, 1),
FUNC("p2led_kn", 0, 32, 1),
};
-static struct rt2880_pmx_func p1led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 33, 1),
FUNC("utif", 2, 33, 1),
FUNC("gpio", 1, 33, 1),
FUNC("p1led_kn", 0, 33, 1),
};
-static struct rt2880_pmx_func p0led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_kn_grp_mt76x8[] = {
FUNC("jtag", 3, 34, 1),
FUNC("rsvd", 2, 34, 1),
FUNC("gpio", 1, 34, 1),
FUNC("p0led_kn", 0, 34, 1),
};
-static struct rt2880_pmx_func wled_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_kn_grp_mt76x8[] = {
FUNC("rsvd", 3, 35, 1),
FUNC("rsvd", 2, 35, 1),
FUNC("gpio", 1, 35, 1),
FUNC("wled_kn", 0, 35, 1),
};
-static struct rt2880_pmx_func p4led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 39, 1),
FUNC("utif", 2, 39, 1),
FUNC("gpio", 1, 39, 1),
FUNC("p4led_an", 0, 39, 1),
};
-static struct rt2880_pmx_func p3led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 40, 1),
FUNC("utif", 2, 40, 1),
FUNC("gpio", 1, 40, 1),
FUNC("p3led_an", 0, 40, 1),
};
-static struct rt2880_pmx_func p2led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 41, 1),
FUNC("utif", 2, 41, 1),
FUNC("gpio", 1, 41, 1),
FUNC("p2led_an", 0, 41, 1),
};
-static struct rt2880_pmx_func p1led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 42, 1),
FUNC("utif", 2, 42, 1),
FUNC("gpio", 1, 42, 1),
FUNC("p1led_an", 0, 42, 1),
};
-static struct rt2880_pmx_func p0led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_an_grp_mt76x8[] = {
FUNC("jtag", 3, 43, 1),
FUNC("rsvd", 2, 43, 1),
FUNC("gpio", 1, 43, 1),
FUNC("p0led_an", 0, 43, 1),
};
-static struct rt2880_pmx_func wled_an_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_an_grp_mt76x8[] = {
FUNC("rsvd", 3, 44, 1),
FUNC("rsvd", 2, 44, 1),
FUNC("gpio", 1, 44, 1),
@@ -308,7 +308,7 @@ static struct rt2880_pmx_func wled_an_grp_mt76x8[] = {
#define MT76X8_GPIO_MODE_SPIS 2
#define MT76X8_GPIO_MODE_GPIO 0
-static struct rt2880_pmx_group mt76x8_pinmux_data[] = {
+static struct ralink_pmx_group mt76x8_pinmux_data[] = {
GRP_G("pwm1", pwm1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_PWM1),
GRP_G("pwm0", pwm0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
@@ -365,9 +365,9 @@ static struct rt2880_pmx_group mt76x8_pinmux_data[] = {
static int mt7620_pinmux_probe(struct platform_device *pdev)
{
if (is_mt76x8())
- return rt2880_pinmux_init(pdev, mt76x8_pinmux_data);
+ return ralink_pinmux_init(pdev, mt76x8_pinmux_data);
else
- return rt2880_pinmux_init(pdev, mt7620a_pinmux_data);
+ return ralink_pinmux_init(pdev, mt7620a_pinmux_data);
}
static const struct of_device_id mt7620_pinmux_match[] = {
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index 7d96144c474e..14b89cb43d4c 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -3,7 +3,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define MT7621_GPIO_MODE_UART1 1
#define MT7621_GPIO_MODE_I2C 2
@@ -34,40 +34,40 @@
#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
#define MT7621_GPIO_MODE_SDHCI_GPIO 1
-static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
-static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
-static struct rt2880_pmx_func uart3_grp[] = {
+static struct ralink_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
+static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
+static struct ralink_pmx_func uart3_grp[] = {
FUNC("uart3", 0, 5, 4),
FUNC("i2s", 2, 5, 4),
FUNC("spdif3", 3, 5, 4),
};
-static struct rt2880_pmx_func uart2_grp[] = {
+static struct ralink_pmx_func uart2_grp[] = {
FUNC("uart2", 0, 9, 4),
FUNC("pcm", 2, 9, 4),
FUNC("spdif2", 3, 9, 4),
};
-static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
-static struct rt2880_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
+static struct ralink_pmx_func wdt_grp[] = {
FUNC("wdt rst", 0, 18, 1),
FUNC("wdt refclk", 2, 18, 1),
};
-static struct rt2880_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_grp[] = {
FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
};
-static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
-static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
-static struct rt2880_pmx_func spi_grp[] = {
+static struct ralink_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
+static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct ralink_pmx_func spi_grp[] = {
FUNC("spi", 0, 34, 7),
FUNC("nand1", 2, 34, 7),
};
-static struct rt2880_pmx_func sdhci_grp[] = {
+static struct ralink_pmx_func sdhci_grp[] = {
FUNC("sdhci", 0, 41, 8),
FUNC("nand2", 2, 41, 8),
};
-static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
-static struct rt2880_pmx_group mt7621_pinmux_data[] = {
+static struct ralink_pmx_group mt7621_pinmux_data[] = {
GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
@@ -92,7 +92,7 @@ static struct rt2880_pmx_group mt7621_pinmux_data[] = {
static int mt7621_pinmux_probe(struct platform_device *pdev)
{
- return rt2880_pinmux_init(pdev, mt7621_pinmux_data);
+ return ralink_pinmux_init(pdev, mt7621_pinmux_data);
}
static const struct of_device_id mt7621_pinmux_match[] = {
diff --git a/drivers/pinctrl/ralink/pinctrl-rt2880.c b/drivers/pinctrl/ralink/pinctrl-ralink.c
similarity index 73%
rename from drivers/pinctrl/ralink/pinctrl-rt2880.c
rename to drivers/pinctrl/ralink/pinctrl-ralink.c
index 96fc06d1b8b9..841f23f55c95 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt2880.c
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.c
@@ -19,23 +19,23 @@
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/mt7620.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#include "../core.h"
#include "../pinctrl-utils.h"
#define SYSC_REG_GPIO_MODE 0x60
#define SYSC_REG_GPIO_MODE2 0x64
-struct rt2880_priv {
+struct ralink_priv {
struct device *dev;
struct pinctrl_pin_desc *pads;
struct pinctrl_desc *desc;
- struct rt2880_pmx_func **func;
+ struct ralink_pmx_func **func;
int func_count;
- struct rt2880_pmx_group *groups;
+ struct ralink_pmx_group *groups;
const char **group_names;
int group_count;
@@ -43,27 +43,27 @@ struct rt2880_priv {
int max_pins;
};
-static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
+static int ralink_get_group_count(struct pinctrl_dev *pctrldev)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return p->group_count;
}
-static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
+static const char *ralink_get_group_name(struct pinctrl_dev *pctrldev,
unsigned int group)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return (group >= p->group_count) ? NULL : p->group_names[group];
}
-static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
+static int ralink_get_group_pins(struct pinctrl_dev *pctrldev,
unsigned int group,
const unsigned int **pins,
unsigned int *num_pins)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
if (group >= p->group_count)
return -EINVAL;
@@ -74,35 +74,35 @@ static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
return 0;
}
-static const struct pinctrl_ops rt2880_pctrl_ops = {
- .get_groups_count = rt2880_get_group_count,
- .get_group_name = rt2880_get_group_name,
- .get_group_pins = rt2880_get_group_pins,
+static const struct pinctrl_ops ralink_pctrl_ops = {
+ .get_groups_count = ralink_get_group_count,
+ .get_group_name = ralink_get_group_name,
+ .get_group_pins = ralink_get_group_pins,
.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
.dt_free_map = pinconf_generic_dt_free_map,
};
-static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
+static int ralink_pmx_func_count(struct pinctrl_dev *pctrldev)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return p->func_count;
}
-static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
+static const char *ralink_pmx_func_name(struct pinctrl_dev *pctrldev,
unsigned int func)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
return p->func[func]->name;
}
-static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
+static int ralink_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
unsigned int func,
const char * const **groups,
unsigned int * const num_groups)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
if (p->func[func]->group_count == 1)
*groups = &p->group_names[p->func[func]->groups[0]];
@@ -114,10 +114,10 @@ static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
return 0;
}
-static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
+static int ralink_pmx_group_enable(struct pinctrl_dev *pctrldev,
unsigned int func, unsigned int group)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
u32 mode = 0;
u32 reg = SYSC_REG_GPIO_MODE;
int i;
@@ -158,11 +158,11 @@ static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
return 0;
}
-static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
+static int ralink_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
struct pinctrl_gpio_range *range,
unsigned int pin)
{
- struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
+ struct ralink_priv *p = pinctrl_dev_get_drvdata(pctrldev);
if (!p->gpio[pin]) {
dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
@@ -172,28 +172,28 @@ static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
return 0;
}
-static const struct pinmux_ops rt2880_pmx_group_ops = {
- .get_functions_count = rt2880_pmx_func_count,
- .get_function_name = rt2880_pmx_func_name,
- .get_function_groups = rt2880_pmx_group_get_groups,
- .set_mux = rt2880_pmx_group_enable,
- .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
+static const struct pinmux_ops ralink_pmx_group_ops = {
+ .get_functions_count = ralink_pmx_func_count,
+ .get_function_name = ralink_pmx_func_name,
+ .get_function_groups = ralink_pmx_group_get_groups,
+ .set_mux = ralink_pmx_group_enable,
+ .gpio_request_enable = ralink_pmx_group_gpio_request_enable,
};
-static struct pinctrl_desc rt2880_pctrl_desc = {
+static struct pinctrl_desc ralink_pctrl_desc = {
.owner = THIS_MODULE,
- .name = "rt2880-pinmux",
- .pctlops = &rt2880_pctrl_ops,
- .pmxops = &rt2880_pmx_group_ops,
+ .name = "ralink-pinmux",
+ .pctlops = &ralink_pctrl_ops,
+ .pmxops = &ralink_pmx_group_ops,
};
-static struct rt2880_pmx_func gpio_func = {
+static struct ralink_pmx_func gpio_func = {
.name = "gpio",
};
-static int rt2880_pinmux_index(struct rt2880_priv *p)
+static int ralink_pinmux_index(struct ralink_priv *p)
{
- struct rt2880_pmx_group *mux = p->groups;
+ struct ralink_pmx_group *mux = p->groups;
int i, j, c = 0;
/* count the mux functions */
@@ -248,7 +248,7 @@ static int rt2880_pinmux_index(struct rt2880_priv *p)
return 0;
}
-static int rt2880_pinmux_pins(struct rt2880_priv *p)
+static int ralink_pinmux_pins(struct ralink_priv *p)
{
int i, j;
@@ -311,10 +311,10 @@ static int rt2880_pinmux_pins(struct rt2880_priv *p)
return 0;
}
-int rt2880_pinmux_init(struct platform_device *pdev,
- struct rt2880_pmx_group *data)
+int ralink_pinmux_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data)
{
- struct rt2880_priv *p;
+ struct ralink_priv *p;
struct pinctrl_dev *dev;
int err;
@@ -322,23 +322,23 @@ int rt2880_pinmux_init(struct platform_device *pdev,
return -ENOTSUPP;
/* setup the private data */
- p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
+ p = devm_kzalloc(&pdev->dev, sizeof(struct ralink_priv), GFP_KERNEL);
if (!p)
return -ENOMEM;
p->dev = &pdev->dev;
- p->desc = &rt2880_pctrl_desc;
+ p->desc = &ralink_pctrl_desc;
p->groups = data;
platform_set_drvdata(pdev, p);
/* init the device */
- err = rt2880_pinmux_index(p);
+ err = ralink_pinmux_index(p);
if (err) {
dev_err(&pdev->dev, "failed to load index\n");
return err;
}
- err = rt2880_pinmux_pins(p);
+ err = ralink_pinmux_pins(p);
if (err) {
dev_err(&pdev->dev, "failed to load pins\n");
return err;
diff --git a/drivers/pinctrl/ralink/pinmux.h b/drivers/pinctrl/ralink/pinctrl-ralink.h
similarity index 75%
rename from drivers/pinctrl/ralink/pinmux.h
rename to drivers/pinctrl/ralink/pinctrl-ralink.h
index 0046abe3bcc7..134969409585 100644
--- a/drivers/pinctrl/ralink/pinmux.h
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.h
@@ -3,8 +3,8 @@
* Copyright (C) 2012 John Crispin <john@phrozen.org>
*/
-#ifndef _RT288X_PINMUX_H__
-#define _RT288X_PINMUX_H__
+#ifndef _PINCTRL_RALINK_H__
+#define _PINCTRL_RALINK_H__
#define FUNC(name, value, pin_first, pin_count) \
{ name, value, pin_first, pin_count }
@@ -19,9 +19,9 @@
.func = _func, .gpio = _gpio, \
.func_count = ARRAY_SIZE(_func) }
-struct rt2880_pmx_group;
+struct ralink_pmx_group;
-struct rt2880_pmx_func {
+struct ralink_pmx_func {
const char *name;
const char value;
@@ -35,7 +35,7 @@ struct rt2880_pmx_func {
int enabled;
};
-struct rt2880_pmx_group {
+struct ralink_pmx_group {
const char *name;
int enabled;
@@ -43,11 +43,11 @@ struct rt2880_pmx_group {
const char mask;
const char gpio;
- struct rt2880_pmx_func *func;
+ struct ralink_pmx_func *func;
int func_count;
};
-int rt2880_pinmux_init(struct platform_device *pdev,
- struct rt2880_pmx_group *data);
+int ralink_pinmux_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data);
#endif
diff --git a/drivers/pinctrl/ralink/pinctrl-rt288x.c b/drivers/pinctrl/ralink/pinctrl-rt288x.c
index 0744aebbace5..40c45140ff8a 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt288x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt288x.c
@@ -4,7 +4,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define RT2880_GPIO_MODE_I2C BIT(0)
#define RT2880_GPIO_MODE_UART0 BIT(1)
@@ -15,15 +15,15 @@
#define RT2880_GPIO_MODE_SDRAM BIT(6)
#define RT2880_GPIO_MODE_PCI BIT(7)
-static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
-static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct ralink_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
+static struct ralink_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
-static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
+static struct ralink_pmx_group rt2880_pinmux_data_act[] = {
GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI),
GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0),
@@ -36,7 +36,7 @@ static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
static int rt288x_pinmux_probe(struct platform_device *pdev)
{
- return rt2880_pinmux_init(pdev, rt2880_pinmux_data_act);
+ return ralink_pinmux_init(pdev, rt2880_pinmux_data_act);
}
static const struct of_device_id rt288x_pinmux_match[] = {
diff --git a/drivers/pinctrl/ralink/pinctrl-rt305x.c b/drivers/pinctrl/ralink/pinctrl-rt305x.c
index 5d8fa156c003..25527ca1ccaa 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt305x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt305x.c
@@ -5,7 +5,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define RT305X_GPIO_MODE_UART0_SHIFT 2
#define RT305X_GPIO_MODE_UART0_MASK 0x7
@@ -31,9 +31,9 @@
#define RT3352_GPIO_MODE_LNA 18
#define RT3352_GPIO_MODE_PA 20
-static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartf_func[] = {
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartf_func[] = {
FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8),
@@ -42,28 +42,28 @@ static struct rt2880_pmx_func uartf_func[] = {
FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
-static struct rt2880_pmx_func rt5350_cs1_func[] = {
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct ralink_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
+static struct ralink_pmx_func rt5350_cs1_func[] = {
FUNC("spi_cs1", 0, 27, 1),
FUNC("wdg_cs1", 1, 27, 1),
};
-static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-static struct rt2880_pmx_func rt3352_rgmii_func[] = {
+static struct ralink_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
+static struct ralink_pmx_func rt3352_rgmii_func[] = {
FUNC("rgmii", 0, 24, 12)
};
-static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
-static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
-static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
-static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
-static struct rt2880_pmx_func rt3352_cs1_func[] = {
+static struct ralink_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
+static struct ralink_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
+static struct ralink_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
+static struct ralink_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
+static struct ralink_pmx_func rt3352_cs1_func[] = {
FUNC("spi_cs1", 0, 45, 1),
FUNC("wdg_cs1", 1, 45, 1),
};
-static struct rt2880_pmx_group rt3050_pinmux_data[] = {
+static struct ralink_pmx_group rt3050_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
@@ -76,7 +76,7 @@ static struct rt2880_pmx_group rt3050_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_group rt3352_pinmux_data[] = {
+static struct ralink_pmx_group rt3352_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
@@ -92,7 +92,7 @@ static struct rt2880_pmx_group rt3352_pinmux_data[] = {
{ 0 }
};
-static struct rt2880_pmx_group rt5350_pinmux_data[] = {
+static struct ralink_pmx_group rt5350_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
@@ -107,11 +107,11 @@ static struct rt2880_pmx_group rt5350_pinmux_data[] = {
static int rt305x_pinmux_probe(struct platform_device *pdev)
{
if (soc_is_rt5350())
- return rt2880_pinmux_init(pdev, rt5350_pinmux_data);
+ return ralink_pinmux_init(pdev, rt5350_pinmux_data);
else if (soc_is_rt305x() || soc_is_rt3350())
- return rt2880_pinmux_init(pdev, rt3050_pinmux_data);
+ return ralink_pinmux_init(pdev, rt3050_pinmux_data);
else if (soc_is_rt3352())
- return rt2880_pinmux_init(pdev, rt3352_pinmux_data);
+ return ralink_pinmux_init(pdev, rt3352_pinmux_data);
else
return -EINVAL;
}
diff --git a/drivers/pinctrl/ralink/pinctrl-rt3883.c b/drivers/pinctrl/ralink/pinctrl-rt3883.c
index 3e0e1b4caa64..0b8674dbe188 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt3883.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt3883.c
@@ -3,7 +3,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
-#include "pinmux.h"
+#include "pinctrl-ralink.h"
#define RT3883_GPIO_MODE_UART0_SHIFT 2
#define RT3883_GPIO_MODE_UART0_MASK 0x7
@@ -39,9 +39,9 @@
#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3
#define RT3883_GPIO_MODE_LNA_G _RT3883_GPIO_MODE_LNA_G(RT3883_GPIO_MODE_LNA_G_MASK)
-static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-static struct rt2880_pmx_func uartf_func[] = {
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartf_func[] = {
FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8),
@@ -50,21 +50,21 @@ static struct rt2880_pmx_func uartf_func[] = {
FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
-static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
-static struct rt2880_pmx_func pci_func[] = {
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct ralink_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
+static struct ralink_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
+static struct ralink_pmx_func pci_func[] = {
FUNC("pci-dev", 0, 40, 32),
FUNC("pci-host2", 1, 40, 32),
FUNC("pci-host1", 2, 40, 32),
FUNC("pci-fnc", 3, 40, 32)
};
-static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
-static struct rt2880_pmx_func ge2_func[] = { FUNC("ge2", 0, 84, 12) };
+static struct ralink_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
+static struct ralink_pmx_func ge2_func[] = { FUNC("ge2", 0, 84, 12) };
-static struct rt2880_pmx_group rt3883_pinmux_data[] = {
+static struct ralink_pmx_group rt3883_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK,
@@ -83,7 +83,7 @@ static struct rt2880_pmx_group rt3883_pinmux_data[] = {
static int rt3883_pinmux_probe(struct platform_device *pdev)
{
- return rt2880_pinmux_init(pdev, rt3883_pinmux_data);
+ return ralink_pinmux_init(pdev, rt3883_pinmux_data);
}
static const struct of_device_id rt3883_pinmux_match[] = {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 03/14] pinctrl: ralink: rename pinmux functions to pinctrl
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Rename pinctrl related functions from "pinmux" to "pinctrl". Change driver
name from "ralink-pinmux" to "ralink-pinctrl".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 22 +++++++++++-----------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 20 ++++++++++----------
drivers/pinctrl/ralink/pinctrl-ralink.c | 14 +++++++-------
drivers/pinctrl/ralink/pinctrl-ralink.h | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt288x.c | 20 ++++++++++----------
drivers/pinctrl/ralink/pinctrl-rt305x.c | 24 ++++++++++++------------
drivers/pinctrl/ralink/pinctrl-rt3883.c | 20 ++++++++++----------
7 files changed, 62 insertions(+), 62 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index 51b863d85c51..a790f3944314 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -362,30 +362,30 @@ static struct ralink_pmx_group mt76x8_pinmux_data[] = {
{ 0 }
};
-static int mt7620_pinmux_probe(struct platform_device *pdev)
+static int mt7620_pinctrl_probe(struct platform_device *pdev)
{
if (is_mt76x8())
- return ralink_pinmux_init(pdev, mt76x8_pinmux_data);
+ return ralink_pinctrl_init(pdev, mt76x8_pinmux_data);
else
- return ralink_pinmux_init(pdev, mt7620a_pinmux_data);
+ return ralink_pinctrl_init(pdev, mt7620a_pinmux_data);
}
-static const struct of_device_id mt7620_pinmux_match[] = {
+static const struct of_device_id mt7620_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, mt7620_pinmux_match);
+MODULE_DEVICE_TABLE(of, mt7620_pinctrl_match);
-static struct platform_driver mt7620_pinmux_driver = {
- .probe = mt7620_pinmux_probe,
+static struct platform_driver mt7620_pinctrl_driver = {
+ .probe = mt7620_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = mt7620_pinmux_match,
+ .of_match_table = mt7620_pinctrl_match,
},
};
-static int __init mt7620_pinmux_init(void)
+static int __init mt7620_pinctrl_init(void)
{
- return platform_driver_register(&mt7620_pinmux_driver);
+ return platform_driver_register(&mt7620_pinctrl_driver);
}
-core_initcall_sync(mt7620_pinmux_init);
+core_initcall_sync(mt7620_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index 14b89cb43d4c..bad4f1a8cf3f 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -90,27 +90,27 @@ static struct ralink_pmx_group mt7621_pinmux_data[] = {
{ 0 }
};
-static int mt7621_pinmux_probe(struct platform_device *pdev)
+static int mt7621_pinctrl_probe(struct platform_device *pdev)
{
- return ralink_pinmux_init(pdev, mt7621_pinmux_data);
+ return ralink_pinctrl_init(pdev, mt7621_pinmux_data);
}
-static const struct of_device_id mt7621_pinmux_match[] = {
+static const struct of_device_id mt7621_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, mt7621_pinmux_match);
+MODULE_DEVICE_TABLE(of, mt7621_pinctrl_match);
-static struct platform_driver mt7621_pinmux_driver = {
- .probe = mt7621_pinmux_probe,
+static struct platform_driver mt7621_pinctrl_driver = {
+ .probe = mt7621_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = mt7621_pinmux_match,
+ .of_match_table = mt7621_pinctrl_match,
},
};
-static int __init mt7621_pinmux_init(void)
+static int __init mt7621_pinctrl_init(void)
{
- return platform_driver_register(&mt7621_pinmux_driver);
+ return platform_driver_register(&mt7621_pinctrl_driver);
}
-core_initcall_sync(mt7621_pinmux_init);
+core_initcall_sync(mt7621_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-ralink.c b/drivers/pinctrl/ralink/pinctrl-ralink.c
index 841f23f55c95..63429a287434 100644
--- a/drivers/pinctrl/ralink/pinctrl-ralink.c
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.c
@@ -182,7 +182,7 @@ static const struct pinmux_ops ralink_pmx_group_ops = {
static struct pinctrl_desc ralink_pctrl_desc = {
.owner = THIS_MODULE,
- .name = "ralink-pinmux",
+ .name = "ralink-pinctrl",
.pctlops = &ralink_pctrl_ops,
.pmxops = &ralink_pmx_group_ops,
};
@@ -191,7 +191,7 @@ static struct ralink_pmx_func gpio_func = {
.name = "gpio",
};
-static int ralink_pinmux_index(struct ralink_priv *p)
+static int ralink_pinctrl_index(struct ralink_priv *p)
{
struct ralink_pmx_group *mux = p->groups;
int i, j, c = 0;
@@ -248,7 +248,7 @@ static int ralink_pinmux_index(struct ralink_priv *p)
return 0;
}
-static int ralink_pinmux_pins(struct ralink_priv *p)
+static int ralink_pinctrl_pins(struct ralink_priv *p)
{
int i, j;
@@ -311,8 +311,8 @@ static int ralink_pinmux_pins(struct ralink_priv *p)
return 0;
}
-int ralink_pinmux_init(struct platform_device *pdev,
- struct ralink_pmx_group *data)
+int ralink_pinctrl_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data)
{
struct ralink_priv *p;
struct pinctrl_dev *dev;
@@ -332,13 +332,13 @@ int ralink_pinmux_init(struct platform_device *pdev,
platform_set_drvdata(pdev, p);
/* init the device */
- err = ralink_pinmux_index(p);
+ err = ralink_pinctrl_index(p);
if (err) {
dev_err(&pdev->dev, "failed to load index\n");
return err;
}
- err = ralink_pinmux_pins(p);
+ err = ralink_pinctrl_pins(p);
if (err) {
dev_err(&pdev->dev, "failed to load pins\n");
return err;
diff --git a/drivers/pinctrl/ralink/pinctrl-ralink.h b/drivers/pinctrl/ralink/pinctrl-ralink.h
index 134969409585..e6037be1e153 100644
--- a/drivers/pinctrl/ralink/pinctrl-ralink.h
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.h
@@ -47,7 +47,7 @@ struct ralink_pmx_group {
int func_count;
};
-int ralink_pinmux_init(struct platform_device *pdev,
- struct ralink_pmx_group *data);
+int ralink_pinctrl_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data);
#endif
diff --git a/drivers/pinctrl/ralink/pinctrl-rt288x.c b/drivers/pinctrl/ralink/pinctrl-rt288x.c
index 40c45140ff8a..db5c09ed5601 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt288x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt288x.c
@@ -34,27 +34,27 @@ static struct ralink_pmx_group rt2880_pinmux_data_act[] = {
{ 0 }
};
-static int rt288x_pinmux_probe(struct platform_device *pdev)
+static int rt288x_pinctrl_probe(struct platform_device *pdev)
{
- return ralink_pinmux_init(pdev, rt2880_pinmux_data_act);
+ return ralink_pinctrl_init(pdev, rt2880_pinmux_data_act);
}
-static const struct of_device_id rt288x_pinmux_match[] = {
+static const struct of_device_id rt288x_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt288x_pinmux_match);
+MODULE_DEVICE_TABLE(of, rt288x_pinctrl_match);
-static struct platform_driver rt288x_pinmux_driver = {
- .probe = rt288x_pinmux_probe,
+static struct platform_driver rt288x_pinctrl_driver = {
+ .probe = rt288x_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt288x_pinmux_match,
+ .of_match_table = rt288x_pinctrl_match,
},
};
-static int __init rt288x_pinmux_init(void)
+static int __init rt288x_pinctrl_init(void)
{
- return platform_driver_register(&rt288x_pinmux_driver);
+ return platform_driver_register(&rt288x_pinctrl_driver);
}
-core_initcall_sync(rt288x_pinmux_init);
+core_initcall_sync(rt288x_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-rt305x.c b/drivers/pinctrl/ralink/pinctrl-rt305x.c
index 25527ca1ccaa..b4765ca27cac 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt305x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt305x.c
@@ -104,34 +104,34 @@ static struct ralink_pmx_group rt5350_pinmux_data[] = {
{ 0 }
};
-static int rt305x_pinmux_probe(struct platform_device *pdev)
+static int rt305x_pinctrl_probe(struct platform_device *pdev)
{
if (soc_is_rt5350())
- return ralink_pinmux_init(pdev, rt5350_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt5350_pinmux_data);
else if (soc_is_rt305x() || soc_is_rt3350())
- return ralink_pinmux_init(pdev, rt3050_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt3050_pinmux_data);
else if (soc_is_rt3352())
- return ralink_pinmux_init(pdev, rt3352_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt3352_pinmux_data);
else
return -EINVAL;
}
-static const struct of_device_id rt305x_pinmux_match[] = {
+static const struct of_device_id rt305x_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt305x_pinmux_match);
+MODULE_DEVICE_TABLE(of, rt305x_pinctrl_match);
-static struct platform_driver rt305x_pinmux_driver = {
- .probe = rt305x_pinmux_probe,
+static struct platform_driver rt305x_pinctrl_driver = {
+ .probe = rt305x_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt305x_pinmux_match,
+ .of_match_table = rt305x_pinctrl_match,
},
};
-static int __init rt305x_pinmux_init(void)
+static int __init rt305x_pinctrl_init(void)
{
- return platform_driver_register(&rt305x_pinmux_driver);
+ return platform_driver_register(&rt305x_pinctrl_driver);
}
-core_initcall_sync(rt305x_pinmux_init);
+core_initcall_sync(rt305x_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-rt3883.c b/drivers/pinctrl/ralink/pinctrl-rt3883.c
index 0b8674dbe188..b2e8151de226 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt3883.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt3883.c
@@ -81,27 +81,27 @@ static struct ralink_pmx_group rt3883_pinmux_data[] = {
{ 0 }
};
-static int rt3883_pinmux_probe(struct platform_device *pdev)
+static int rt3883_pinctrl_probe(struct platform_device *pdev)
{
- return ralink_pinmux_init(pdev, rt3883_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt3883_pinmux_data);
}
-static const struct of_device_id rt3883_pinmux_match[] = {
+static const struct of_device_id rt3883_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt3883_pinmux_match);
+MODULE_DEVICE_TABLE(of, rt3883_pinctrl_match);
-static struct platform_driver rt3883_pinmux_driver = {
- .probe = rt3883_pinmux_probe,
+static struct platform_driver rt3883_pinctrl_driver = {
+ .probe = rt3883_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt3883_pinmux_match,
+ .of_match_table = rt3883_pinctrl_match,
},
};
-static int __init rt3883_pinmux_init(void)
+static int __init rt3883_pinctrl_init(void)
{
- return platform_driver_register(&rt3883_pinmux_driver);
+ return platform_driver_register(&rt3883_pinctrl_driver);
}
-core_initcall_sync(rt3883_pinmux_init);
+core_initcall_sync(rt3883_pinctrl_init);
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 03/14] pinctrl: ralink: rename pinmux functions to pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Rename pinctrl related functions from "pinmux" to "pinctrl". Change driver
name from "ralink-pinmux" to "ralink-pinctrl".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 22 +++++++++++-----------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 20 ++++++++++----------
drivers/pinctrl/ralink/pinctrl-ralink.c | 14 +++++++-------
drivers/pinctrl/ralink/pinctrl-ralink.h | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt288x.c | 20 ++++++++++----------
drivers/pinctrl/ralink/pinctrl-rt305x.c | 24 ++++++++++++------------
drivers/pinctrl/ralink/pinctrl-rt3883.c | 20 ++++++++++----------
7 files changed, 62 insertions(+), 62 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index 51b863d85c51..a790f3944314 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -362,30 +362,30 @@ static struct ralink_pmx_group mt76x8_pinmux_data[] = {
{ 0 }
};
-static int mt7620_pinmux_probe(struct platform_device *pdev)
+static int mt7620_pinctrl_probe(struct platform_device *pdev)
{
if (is_mt76x8())
- return ralink_pinmux_init(pdev, mt76x8_pinmux_data);
+ return ralink_pinctrl_init(pdev, mt76x8_pinmux_data);
else
- return ralink_pinmux_init(pdev, mt7620a_pinmux_data);
+ return ralink_pinctrl_init(pdev, mt7620a_pinmux_data);
}
-static const struct of_device_id mt7620_pinmux_match[] = {
+static const struct of_device_id mt7620_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, mt7620_pinmux_match);
+MODULE_DEVICE_TABLE(of, mt7620_pinctrl_match);
-static struct platform_driver mt7620_pinmux_driver = {
- .probe = mt7620_pinmux_probe,
+static struct platform_driver mt7620_pinctrl_driver = {
+ .probe = mt7620_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = mt7620_pinmux_match,
+ .of_match_table = mt7620_pinctrl_match,
},
};
-static int __init mt7620_pinmux_init(void)
+static int __init mt7620_pinctrl_init(void)
{
- return platform_driver_register(&mt7620_pinmux_driver);
+ return platform_driver_register(&mt7620_pinctrl_driver);
}
-core_initcall_sync(mt7620_pinmux_init);
+core_initcall_sync(mt7620_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index 14b89cb43d4c..bad4f1a8cf3f 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -90,27 +90,27 @@ static struct ralink_pmx_group mt7621_pinmux_data[] = {
{ 0 }
};
-static int mt7621_pinmux_probe(struct platform_device *pdev)
+static int mt7621_pinctrl_probe(struct platform_device *pdev)
{
- return ralink_pinmux_init(pdev, mt7621_pinmux_data);
+ return ralink_pinctrl_init(pdev, mt7621_pinmux_data);
}
-static const struct of_device_id mt7621_pinmux_match[] = {
+static const struct of_device_id mt7621_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, mt7621_pinmux_match);
+MODULE_DEVICE_TABLE(of, mt7621_pinctrl_match);
-static struct platform_driver mt7621_pinmux_driver = {
- .probe = mt7621_pinmux_probe,
+static struct platform_driver mt7621_pinctrl_driver = {
+ .probe = mt7621_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = mt7621_pinmux_match,
+ .of_match_table = mt7621_pinctrl_match,
},
};
-static int __init mt7621_pinmux_init(void)
+static int __init mt7621_pinctrl_init(void)
{
- return platform_driver_register(&mt7621_pinmux_driver);
+ return platform_driver_register(&mt7621_pinctrl_driver);
}
-core_initcall_sync(mt7621_pinmux_init);
+core_initcall_sync(mt7621_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-ralink.c b/drivers/pinctrl/ralink/pinctrl-ralink.c
index 841f23f55c95..63429a287434 100644
--- a/drivers/pinctrl/ralink/pinctrl-ralink.c
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.c
@@ -182,7 +182,7 @@ static const struct pinmux_ops ralink_pmx_group_ops = {
static struct pinctrl_desc ralink_pctrl_desc = {
.owner = THIS_MODULE,
- .name = "ralink-pinmux",
+ .name = "ralink-pinctrl",
.pctlops = &ralink_pctrl_ops,
.pmxops = &ralink_pmx_group_ops,
};
@@ -191,7 +191,7 @@ static struct ralink_pmx_func gpio_func = {
.name = "gpio",
};
-static int ralink_pinmux_index(struct ralink_priv *p)
+static int ralink_pinctrl_index(struct ralink_priv *p)
{
struct ralink_pmx_group *mux = p->groups;
int i, j, c = 0;
@@ -248,7 +248,7 @@ static int ralink_pinmux_index(struct ralink_priv *p)
return 0;
}
-static int ralink_pinmux_pins(struct ralink_priv *p)
+static int ralink_pinctrl_pins(struct ralink_priv *p)
{
int i, j;
@@ -311,8 +311,8 @@ static int ralink_pinmux_pins(struct ralink_priv *p)
return 0;
}
-int ralink_pinmux_init(struct platform_device *pdev,
- struct ralink_pmx_group *data)
+int ralink_pinctrl_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data)
{
struct ralink_priv *p;
struct pinctrl_dev *dev;
@@ -332,13 +332,13 @@ int ralink_pinmux_init(struct platform_device *pdev,
platform_set_drvdata(pdev, p);
/* init the device */
- err = ralink_pinmux_index(p);
+ err = ralink_pinctrl_index(p);
if (err) {
dev_err(&pdev->dev, "failed to load index\n");
return err;
}
- err = ralink_pinmux_pins(p);
+ err = ralink_pinctrl_pins(p);
if (err) {
dev_err(&pdev->dev, "failed to load pins\n");
return err;
diff --git a/drivers/pinctrl/ralink/pinctrl-ralink.h b/drivers/pinctrl/ralink/pinctrl-ralink.h
index 134969409585..e6037be1e153 100644
--- a/drivers/pinctrl/ralink/pinctrl-ralink.h
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.h
@@ -47,7 +47,7 @@ struct ralink_pmx_group {
int func_count;
};
-int ralink_pinmux_init(struct platform_device *pdev,
- struct ralink_pmx_group *data);
+int ralink_pinctrl_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data);
#endif
diff --git a/drivers/pinctrl/ralink/pinctrl-rt288x.c b/drivers/pinctrl/ralink/pinctrl-rt288x.c
index 40c45140ff8a..db5c09ed5601 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt288x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt288x.c
@@ -34,27 +34,27 @@ static struct ralink_pmx_group rt2880_pinmux_data_act[] = {
{ 0 }
};
-static int rt288x_pinmux_probe(struct platform_device *pdev)
+static int rt288x_pinctrl_probe(struct platform_device *pdev)
{
- return ralink_pinmux_init(pdev, rt2880_pinmux_data_act);
+ return ralink_pinctrl_init(pdev, rt2880_pinmux_data_act);
}
-static const struct of_device_id rt288x_pinmux_match[] = {
+static const struct of_device_id rt288x_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt288x_pinmux_match);
+MODULE_DEVICE_TABLE(of, rt288x_pinctrl_match);
-static struct platform_driver rt288x_pinmux_driver = {
- .probe = rt288x_pinmux_probe,
+static struct platform_driver rt288x_pinctrl_driver = {
+ .probe = rt288x_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt288x_pinmux_match,
+ .of_match_table = rt288x_pinctrl_match,
},
};
-static int __init rt288x_pinmux_init(void)
+static int __init rt288x_pinctrl_init(void)
{
- return platform_driver_register(&rt288x_pinmux_driver);
+ return platform_driver_register(&rt288x_pinctrl_driver);
}
-core_initcall_sync(rt288x_pinmux_init);
+core_initcall_sync(rt288x_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-rt305x.c b/drivers/pinctrl/ralink/pinctrl-rt305x.c
index 25527ca1ccaa..b4765ca27cac 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt305x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt305x.c
@@ -104,34 +104,34 @@ static struct ralink_pmx_group rt5350_pinmux_data[] = {
{ 0 }
};
-static int rt305x_pinmux_probe(struct platform_device *pdev)
+static int rt305x_pinctrl_probe(struct platform_device *pdev)
{
if (soc_is_rt5350())
- return ralink_pinmux_init(pdev, rt5350_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt5350_pinmux_data);
else if (soc_is_rt305x() || soc_is_rt3350())
- return ralink_pinmux_init(pdev, rt3050_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt3050_pinmux_data);
else if (soc_is_rt3352())
- return ralink_pinmux_init(pdev, rt3352_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt3352_pinmux_data);
else
return -EINVAL;
}
-static const struct of_device_id rt305x_pinmux_match[] = {
+static const struct of_device_id rt305x_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt305x_pinmux_match);
+MODULE_DEVICE_TABLE(of, rt305x_pinctrl_match);
-static struct platform_driver rt305x_pinmux_driver = {
- .probe = rt305x_pinmux_probe,
+static struct platform_driver rt305x_pinctrl_driver = {
+ .probe = rt305x_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt305x_pinmux_match,
+ .of_match_table = rt305x_pinctrl_match,
},
};
-static int __init rt305x_pinmux_init(void)
+static int __init rt305x_pinctrl_init(void)
{
- return platform_driver_register(&rt305x_pinmux_driver);
+ return platform_driver_register(&rt305x_pinctrl_driver);
}
-core_initcall_sync(rt305x_pinmux_init);
+core_initcall_sync(rt305x_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-rt3883.c b/drivers/pinctrl/ralink/pinctrl-rt3883.c
index 0b8674dbe188..b2e8151de226 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt3883.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt3883.c
@@ -81,27 +81,27 @@ static struct ralink_pmx_group rt3883_pinmux_data[] = {
{ 0 }
};
-static int rt3883_pinmux_probe(struct platform_device *pdev)
+static int rt3883_pinctrl_probe(struct platform_device *pdev)
{
- return ralink_pinmux_init(pdev, rt3883_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt3883_pinmux_data);
}
-static const struct of_device_id rt3883_pinmux_match[] = {
+static const struct of_device_id rt3883_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt3883_pinmux_match);
+MODULE_DEVICE_TABLE(of, rt3883_pinctrl_match);
-static struct platform_driver rt3883_pinmux_driver = {
- .probe = rt3883_pinmux_probe,
+static struct platform_driver rt3883_pinctrl_driver = {
+ .probe = rt3883_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt3883_pinmux_match,
+ .of_match_table = rt3883_pinctrl_match,
},
};
-static int __init rt3883_pinmux_init(void)
+static int __init rt3883_pinctrl_init(void)
{
- return platform_driver_register(&rt3883_pinmux_driver);
+ return platform_driver_register(&rt3883_pinctrl_driver);
}
-core_initcall_sync(rt3883_pinmux_init);
+core_initcall_sync(rt3883_pinctrl_init);
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 03/14] pinctrl: ralink: rename pinmux functions to pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Rename pinctrl related functions from "pinmux" to "pinctrl". Change driver
name from "ralink-pinmux" to "ralink-pinctrl".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 22 +++++++++++-----------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 20 ++++++++++----------
drivers/pinctrl/ralink/pinctrl-ralink.c | 14 +++++++-------
drivers/pinctrl/ralink/pinctrl-ralink.h | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt288x.c | 20 ++++++++++----------
drivers/pinctrl/ralink/pinctrl-rt305x.c | 24 ++++++++++++------------
drivers/pinctrl/ralink/pinctrl-rt3883.c | 20 ++++++++++----------
7 files changed, 62 insertions(+), 62 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index 51b863d85c51..a790f3944314 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -362,30 +362,30 @@ static struct ralink_pmx_group mt76x8_pinmux_data[] = {
{ 0 }
};
-static int mt7620_pinmux_probe(struct platform_device *pdev)
+static int mt7620_pinctrl_probe(struct platform_device *pdev)
{
if (is_mt76x8())
- return ralink_pinmux_init(pdev, mt76x8_pinmux_data);
+ return ralink_pinctrl_init(pdev, mt76x8_pinmux_data);
else
- return ralink_pinmux_init(pdev, mt7620a_pinmux_data);
+ return ralink_pinctrl_init(pdev, mt7620a_pinmux_data);
}
-static const struct of_device_id mt7620_pinmux_match[] = {
+static const struct of_device_id mt7620_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, mt7620_pinmux_match);
+MODULE_DEVICE_TABLE(of, mt7620_pinctrl_match);
-static struct platform_driver mt7620_pinmux_driver = {
- .probe = mt7620_pinmux_probe,
+static struct platform_driver mt7620_pinctrl_driver = {
+ .probe = mt7620_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = mt7620_pinmux_match,
+ .of_match_table = mt7620_pinctrl_match,
},
};
-static int __init mt7620_pinmux_init(void)
+static int __init mt7620_pinctrl_init(void)
{
- return platform_driver_register(&mt7620_pinmux_driver);
+ return platform_driver_register(&mt7620_pinctrl_driver);
}
-core_initcall_sync(mt7620_pinmux_init);
+core_initcall_sync(mt7620_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index 14b89cb43d4c..bad4f1a8cf3f 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -90,27 +90,27 @@ static struct ralink_pmx_group mt7621_pinmux_data[] = {
{ 0 }
};
-static int mt7621_pinmux_probe(struct platform_device *pdev)
+static int mt7621_pinctrl_probe(struct platform_device *pdev)
{
- return ralink_pinmux_init(pdev, mt7621_pinmux_data);
+ return ralink_pinctrl_init(pdev, mt7621_pinmux_data);
}
-static const struct of_device_id mt7621_pinmux_match[] = {
+static const struct of_device_id mt7621_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, mt7621_pinmux_match);
+MODULE_DEVICE_TABLE(of, mt7621_pinctrl_match);
-static struct platform_driver mt7621_pinmux_driver = {
- .probe = mt7621_pinmux_probe,
+static struct platform_driver mt7621_pinctrl_driver = {
+ .probe = mt7621_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = mt7621_pinmux_match,
+ .of_match_table = mt7621_pinctrl_match,
},
};
-static int __init mt7621_pinmux_init(void)
+static int __init mt7621_pinctrl_init(void)
{
- return platform_driver_register(&mt7621_pinmux_driver);
+ return platform_driver_register(&mt7621_pinctrl_driver);
}
-core_initcall_sync(mt7621_pinmux_init);
+core_initcall_sync(mt7621_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-ralink.c b/drivers/pinctrl/ralink/pinctrl-ralink.c
index 841f23f55c95..63429a287434 100644
--- a/drivers/pinctrl/ralink/pinctrl-ralink.c
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.c
@@ -182,7 +182,7 @@ static const struct pinmux_ops ralink_pmx_group_ops = {
static struct pinctrl_desc ralink_pctrl_desc = {
.owner = THIS_MODULE,
- .name = "ralink-pinmux",
+ .name = "ralink-pinctrl",
.pctlops = &ralink_pctrl_ops,
.pmxops = &ralink_pmx_group_ops,
};
@@ -191,7 +191,7 @@ static struct ralink_pmx_func gpio_func = {
.name = "gpio",
};
-static int ralink_pinmux_index(struct ralink_priv *p)
+static int ralink_pinctrl_index(struct ralink_priv *p)
{
struct ralink_pmx_group *mux = p->groups;
int i, j, c = 0;
@@ -248,7 +248,7 @@ static int ralink_pinmux_index(struct ralink_priv *p)
return 0;
}
-static int ralink_pinmux_pins(struct ralink_priv *p)
+static int ralink_pinctrl_pins(struct ralink_priv *p)
{
int i, j;
@@ -311,8 +311,8 @@ static int ralink_pinmux_pins(struct ralink_priv *p)
return 0;
}
-int ralink_pinmux_init(struct platform_device *pdev,
- struct ralink_pmx_group *data)
+int ralink_pinctrl_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data)
{
struct ralink_priv *p;
struct pinctrl_dev *dev;
@@ -332,13 +332,13 @@ int ralink_pinmux_init(struct platform_device *pdev,
platform_set_drvdata(pdev, p);
/* init the device */
- err = ralink_pinmux_index(p);
+ err = ralink_pinctrl_index(p);
if (err) {
dev_err(&pdev->dev, "failed to load index\n");
return err;
}
- err = ralink_pinmux_pins(p);
+ err = ralink_pinctrl_pins(p);
if (err) {
dev_err(&pdev->dev, "failed to load pins\n");
return err;
diff --git a/drivers/pinctrl/ralink/pinctrl-ralink.h b/drivers/pinctrl/ralink/pinctrl-ralink.h
index 134969409585..e6037be1e153 100644
--- a/drivers/pinctrl/ralink/pinctrl-ralink.h
+++ b/drivers/pinctrl/ralink/pinctrl-ralink.h
@@ -47,7 +47,7 @@ struct ralink_pmx_group {
int func_count;
};
-int ralink_pinmux_init(struct platform_device *pdev,
- struct ralink_pmx_group *data);
+int ralink_pinctrl_init(struct platform_device *pdev,
+ struct ralink_pmx_group *data);
#endif
diff --git a/drivers/pinctrl/ralink/pinctrl-rt288x.c b/drivers/pinctrl/ralink/pinctrl-rt288x.c
index 40c45140ff8a..db5c09ed5601 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt288x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt288x.c
@@ -34,27 +34,27 @@ static struct ralink_pmx_group rt2880_pinmux_data_act[] = {
{ 0 }
};
-static int rt288x_pinmux_probe(struct platform_device *pdev)
+static int rt288x_pinctrl_probe(struct platform_device *pdev)
{
- return ralink_pinmux_init(pdev, rt2880_pinmux_data_act);
+ return ralink_pinctrl_init(pdev, rt2880_pinmux_data_act);
}
-static const struct of_device_id rt288x_pinmux_match[] = {
+static const struct of_device_id rt288x_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt288x_pinmux_match);
+MODULE_DEVICE_TABLE(of, rt288x_pinctrl_match);
-static struct platform_driver rt288x_pinmux_driver = {
- .probe = rt288x_pinmux_probe,
+static struct platform_driver rt288x_pinctrl_driver = {
+ .probe = rt288x_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt288x_pinmux_match,
+ .of_match_table = rt288x_pinctrl_match,
},
};
-static int __init rt288x_pinmux_init(void)
+static int __init rt288x_pinctrl_init(void)
{
- return platform_driver_register(&rt288x_pinmux_driver);
+ return platform_driver_register(&rt288x_pinctrl_driver);
}
-core_initcall_sync(rt288x_pinmux_init);
+core_initcall_sync(rt288x_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-rt305x.c b/drivers/pinctrl/ralink/pinctrl-rt305x.c
index 25527ca1ccaa..b4765ca27cac 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt305x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt305x.c
@@ -104,34 +104,34 @@ static struct ralink_pmx_group rt5350_pinmux_data[] = {
{ 0 }
};
-static int rt305x_pinmux_probe(struct platform_device *pdev)
+static int rt305x_pinctrl_probe(struct platform_device *pdev)
{
if (soc_is_rt5350())
- return ralink_pinmux_init(pdev, rt5350_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt5350_pinmux_data);
else if (soc_is_rt305x() || soc_is_rt3350())
- return ralink_pinmux_init(pdev, rt3050_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt3050_pinmux_data);
else if (soc_is_rt3352())
- return ralink_pinmux_init(pdev, rt3352_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt3352_pinmux_data);
else
return -EINVAL;
}
-static const struct of_device_id rt305x_pinmux_match[] = {
+static const struct of_device_id rt305x_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt305x_pinmux_match);
+MODULE_DEVICE_TABLE(of, rt305x_pinctrl_match);
-static struct platform_driver rt305x_pinmux_driver = {
- .probe = rt305x_pinmux_probe,
+static struct platform_driver rt305x_pinctrl_driver = {
+ .probe = rt305x_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt305x_pinmux_match,
+ .of_match_table = rt305x_pinctrl_match,
},
};
-static int __init rt305x_pinmux_init(void)
+static int __init rt305x_pinctrl_init(void)
{
- return platform_driver_register(&rt305x_pinmux_driver);
+ return platform_driver_register(&rt305x_pinctrl_driver);
}
-core_initcall_sync(rt305x_pinmux_init);
+core_initcall_sync(rt305x_pinctrl_init);
diff --git a/drivers/pinctrl/ralink/pinctrl-rt3883.c b/drivers/pinctrl/ralink/pinctrl-rt3883.c
index 0b8674dbe188..b2e8151de226 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt3883.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt3883.c
@@ -81,27 +81,27 @@ static struct ralink_pmx_group rt3883_pinmux_data[] = {
{ 0 }
};
-static int rt3883_pinmux_probe(struct platform_device *pdev)
+static int rt3883_pinctrl_probe(struct platform_device *pdev)
{
- return ralink_pinmux_init(pdev, rt3883_pinmux_data);
+ return ralink_pinctrl_init(pdev, rt3883_pinmux_data);
}
-static const struct of_device_id rt3883_pinmux_match[] = {
+static const struct of_device_id rt3883_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt3883_pinmux_match);
+MODULE_DEVICE_TABLE(of, rt3883_pinctrl_match);
-static struct platform_driver rt3883_pinmux_driver = {
- .probe = rt3883_pinmux_probe,
+static struct platform_driver rt3883_pinctrl_driver = {
+ .probe = rt3883_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt3883_pinmux_match,
+ .of_match_table = rt3883_pinctrl_match,
},
};
-static int __init rt3883_pinmux_init(void)
+static int __init rt3883_pinctrl_init(void)
{
- return platform_driver_register(&rt3883_pinmux_driver);
+ return platform_driver_register(&rt3883_pinctrl_driver);
}
-core_initcall_sync(rt3883_pinmux_init);
+core_initcall_sync(rt3883_pinctrl_init);
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 04/14] pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Rename "pinctrl-rt288x.c" to "pinctrl-rt2880.c" as this is the Ralink
RT2880 pinctrl subdriver. Rename PINCTRL_RT288X symbol to PINCTRL_RT2880.
Rename functions that include "rt288x" to "rt2880".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/Kconfig | 4 ++--
drivers/pinctrl/ralink/Makefile | 2 +-
.../{pinctrl-rt288x.c => pinctrl-rt2880.c} | 18 +++++++++---------
3 files changed, 12 insertions(+), 12 deletions(-)
rename drivers/pinctrl/ralink/{pinctrl-rt288x.c => pinctrl-rt2880.c} (78%)
diff --git a/drivers/pinctrl/ralink/Kconfig b/drivers/pinctrl/ralink/Kconfig
index d0f0a8f2b9b7..aa82acfae827 100644
--- a/drivers/pinctrl/ralink/Kconfig
+++ b/drivers/pinctrl/ralink/Kconfig
@@ -17,8 +17,8 @@ config PINCTRL_MT7621
depends on RALINK && SOC_MT7621
select PINCTRL_RALINK
-config PINCTRL_RT288X
- bool "RT288X pinctrl driver for RALINK/Mediatek SOCs"
+config PINCTRL_RT2880
+ bool "RT2880 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT288X
select PINCTRL_RALINK
diff --git a/drivers/pinctrl/ralink/Makefile b/drivers/pinctrl/ralink/Makefile
index 2c1323b74e96..0ebbe552526d 100644
--- a/drivers/pinctrl/ralink/Makefile
+++ b/drivers/pinctrl/ralink/Makefile
@@ -3,6 +3,6 @@ obj-$(CONFIG_PINCTRL_RALINK) += pinctrl-ralink.o
obj-$(CONFIG_PINCTRL_MT7620) += pinctrl-mt7620.o
obj-$(CONFIG_PINCTRL_MT7621) += pinctrl-mt7621.o
-obj-$(CONFIG_PINCTRL_RT288X) += pinctrl-rt288x.o
+obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
obj-$(CONFIG_PINCTRL_RT305X) += pinctrl-rt305x.o
obj-$(CONFIG_PINCTRL_RT3883) += pinctrl-rt3883.o
diff --git a/drivers/pinctrl/ralink/pinctrl-rt288x.c b/drivers/pinctrl/ralink/pinctrl-rt2880.c
similarity index 78%
rename from drivers/pinctrl/ralink/pinctrl-rt288x.c
rename to drivers/pinctrl/ralink/pinctrl-rt2880.c
index db5c09ed5601..9c5e828af43a 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt288x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt2880.c
@@ -34,27 +34,27 @@ static struct ralink_pmx_group rt2880_pinmux_data_act[] = {
{ 0 }
};
-static int rt288x_pinctrl_probe(struct platform_device *pdev)
+static int rt2880_pinctrl_probe(struct platform_device *pdev)
{
return ralink_pinctrl_init(pdev, rt2880_pinmux_data_act);
}
-static const struct of_device_id rt288x_pinctrl_match[] = {
+static const struct of_device_id rt2880_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt288x_pinctrl_match);
+MODULE_DEVICE_TABLE(of, rt2880_pinctrl_match);
-static struct platform_driver rt288x_pinctrl_driver = {
- .probe = rt288x_pinctrl_probe,
+static struct platform_driver rt2880_pinctrl_driver = {
+ .probe = rt2880_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt288x_pinctrl_match,
+ .of_match_table = rt2880_pinctrl_match,
},
};
-static int __init rt288x_pinctrl_init(void)
+static int __init rt2880_pinctrl_init(void)
{
- return platform_driver_register(&rt288x_pinctrl_driver);
+ return platform_driver_register(&rt2880_pinctrl_driver);
}
-core_initcall_sync(rt288x_pinctrl_init);
+core_initcall_sync(rt2880_pinctrl_init);
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 04/14] pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Rename "pinctrl-rt288x.c" to "pinctrl-rt2880.c" as this is the Ralink
RT2880 pinctrl subdriver. Rename PINCTRL_RT288X symbol to PINCTRL_RT2880.
Rename functions that include "rt288x" to "rt2880".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/Kconfig | 4 ++--
drivers/pinctrl/ralink/Makefile | 2 +-
.../{pinctrl-rt288x.c => pinctrl-rt2880.c} | 18 +++++++++---------
3 files changed, 12 insertions(+), 12 deletions(-)
rename drivers/pinctrl/ralink/{pinctrl-rt288x.c => pinctrl-rt2880.c} (78%)
diff --git a/drivers/pinctrl/ralink/Kconfig b/drivers/pinctrl/ralink/Kconfig
index d0f0a8f2b9b7..aa82acfae827 100644
--- a/drivers/pinctrl/ralink/Kconfig
+++ b/drivers/pinctrl/ralink/Kconfig
@@ -17,8 +17,8 @@ config PINCTRL_MT7621
depends on RALINK && SOC_MT7621
select PINCTRL_RALINK
-config PINCTRL_RT288X
- bool "RT288X pinctrl driver for RALINK/Mediatek SOCs"
+config PINCTRL_RT2880
+ bool "RT2880 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT288X
select PINCTRL_RALINK
diff --git a/drivers/pinctrl/ralink/Makefile b/drivers/pinctrl/ralink/Makefile
index 2c1323b74e96..0ebbe552526d 100644
--- a/drivers/pinctrl/ralink/Makefile
+++ b/drivers/pinctrl/ralink/Makefile
@@ -3,6 +3,6 @@ obj-$(CONFIG_PINCTRL_RALINK) += pinctrl-ralink.o
obj-$(CONFIG_PINCTRL_MT7620) += pinctrl-mt7620.o
obj-$(CONFIG_PINCTRL_MT7621) += pinctrl-mt7621.o
-obj-$(CONFIG_PINCTRL_RT288X) += pinctrl-rt288x.o
+obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
obj-$(CONFIG_PINCTRL_RT305X) += pinctrl-rt305x.o
obj-$(CONFIG_PINCTRL_RT3883) += pinctrl-rt3883.o
diff --git a/drivers/pinctrl/ralink/pinctrl-rt288x.c b/drivers/pinctrl/ralink/pinctrl-rt2880.c
similarity index 78%
rename from drivers/pinctrl/ralink/pinctrl-rt288x.c
rename to drivers/pinctrl/ralink/pinctrl-rt2880.c
index db5c09ed5601..9c5e828af43a 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt288x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt2880.c
@@ -34,27 +34,27 @@ static struct ralink_pmx_group rt2880_pinmux_data_act[] = {
{ 0 }
};
-static int rt288x_pinctrl_probe(struct platform_device *pdev)
+static int rt2880_pinctrl_probe(struct platform_device *pdev)
{
return ralink_pinctrl_init(pdev, rt2880_pinmux_data_act);
}
-static const struct of_device_id rt288x_pinctrl_match[] = {
+static const struct of_device_id rt2880_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt288x_pinctrl_match);
+MODULE_DEVICE_TABLE(of, rt2880_pinctrl_match);
-static struct platform_driver rt288x_pinctrl_driver = {
- .probe = rt288x_pinctrl_probe,
+static struct platform_driver rt2880_pinctrl_driver = {
+ .probe = rt2880_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt288x_pinctrl_match,
+ .of_match_table = rt2880_pinctrl_match,
},
};
-static int __init rt288x_pinctrl_init(void)
+static int __init rt2880_pinctrl_init(void)
{
- return platform_driver_register(&rt288x_pinctrl_driver);
+ return platform_driver_register(&rt2880_pinctrl_driver);
}
-core_initcall_sync(rt288x_pinctrl_init);
+core_initcall_sync(rt2880_pinctrl_init);
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 04/14] pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Rename "pinctrl-rt288x.c" to "pinctrl-rt2880.c" as this is the Ralink
RT2880 pinctrl subdriver. Rename PINCTRL_RT288X symbol to PINCTRL_RT2880.
Rename functions that include "rt288x" to "rt2880".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/Kconfig | 4 ++--
drivers/pinctrl/ralink/Makefile | 2 +-
.../{pinctrl-rt288x.c => pinctrl-rt2880.c} | 18 +++++++++---------
3 files changed, 12 insertions(+), 12 deletions(-)
rename drivers/pinctrl/ralink/{pinctrl-rt288x.c => pinctrl-rt2880.c} (78%)
diff --git a/drivers/pinctrl/ralink/Kconfig b/drivers/pinctrl/ralink/Kconfig
index d0f0a8f2b9b7..aa82acfae827 100644
--- a/drivers/pinctrl/ralink/Kconfig
+++ b/drivers/pinctrl/ralink/Kconfig
@@ -17,8 +17,8 @@ config PINCTRL_MT7621
depends on RALINK && SOC_MT7621
select PINCTRL_RALINK
-config PINCTRL_RT288X
- bool "RT288X pinctrl driver for RALINK/Mediatek SOCs"
+config PINCTRL_RT2880
+ bool "RT2880 pinctrl driver for RALINK/Mediatek SOCs"
depends on RALINK && SOC_RT288X
select PINCTRL_RALINK
diff --git a/drivers/pinctrl/ralink/Makefile b/drivers/pinctrl/ralink/Makefile
index 2c1323b74e96..0ebbe552526d 100644
--- a/drivers/pinctrl/ralink/Makefile
+++ b/drivers/pinctrl/ralink/Makefile
@@ -3,6 +3,6 @@ obj-$(CONFIG_PINCTRL_RALINK) += pinctrl-ralink.o
obj-$(CONFIG_PINCTRL_MT7620) += pinctrl-mt7620.o
obj-$(CONFIG_PINCTRL_MT7621) += pinctrl-mt7621.o
-obj-$(CONFIG_PINCTRL_RT288X) += pinctrl-rt288x.o
+obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
obj-$(CONFIG_PINCTRL_RT305X) += pinctrl-rt305x.o
obj-$(CONFIG_PINCTRL_RT3883) += pinctrl-rt3883.o
diff --git a/drivers/pinctrl/ralink/pinctrl-rt288x.c b/drivers/pinctrl/ralink/pinctrl-rt2880.c
similarity index 78%
rename from drivers/pinctrl/ralink/pinctrl-rt288x.c
rename to drivers/pinctrl/ralink/pinctrl-rt2880.c
index db5c09ed5601..9c5e828af43a 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt288x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt2880.c
@@ -34,27 +34,27 @@ static struct ralink_pmx_group rt2880_pinmux_data_act[] = {
{ 0 }
};
-static int rt288x_pinctrl_probe(struct platform_device *pdev)
+static int rt2880_pinctrl_probe(struct platform_device *pdev)
{
return ralink_pinctrl_init(pdev, rt2880_pinmux_data_act);
}
-static const struct of_device_id rt288x_pinctrl_match[] = {
+static const struct of_device_id rt2880_pinctrl_match[] = {
{ .compatible = "ralink,rt2880-pinmux" },
{}
};
-MODULE_DEVICE_TABLE(of, rt288x_pinctrl_match);
+MODULE_DEVICE_TABLE(of, rt2880_pinctrl_match);
-static struct platform_driver rt288x_pinctrl_driver = {
- .probe = rt288x_pinctrl_probe,
+static struct platform_driver rt2880_pinctrl_driver = {
+ .probe = rt2880_pinctrl_probe,
.driver = {
.name = "rt2880-pinmux",
- .of_match_table = rt288x_pinctrl_match,
+ .of_match_table = rt2880_pinctrl_match,
},
};
-static int __init rt288x_pinctrl_init(void)
+static int __init rt2880_pinctrl_init(void)
{
- return platform_driver_register(&rt288x_pinctrl_driver);
+ return platform_driver_register(&rt2880_pinctrl_driver);
}
-core_initcall_sync(rt288x_pinctrl_init);
+core_initcall_sync(rt2880_pinctrl_init);
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 05/14] pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Variables for functions include "grp" on the Ralink MT7620 and MT7621
subdrivers. Rename them to "func" instead as they define the functions for
the pin groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 164 ++++++++++++------------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 48 +++----
2 files changed, 106 insertions(+), 106 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index a790f3944314..fde269c68a7b 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -54,20 +54,20 @@
#define MT7620_GPIO_MODE_EPHY 15
#define MT7620_GPIO_MODE_PA 20
-static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
-static struct ralink_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
-static struct ralink_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
-static struct ralink_pmx_func mdio_grp[] = {
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func mdio_func[] = {
FUNC("mdio", MT7620_GPIO_MODE_MDIO, 22, 2),
FUNC("refclk", MT7620_GPIO_MODE_MDIO_REFCLK, 22, 2),
};
-static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
-static struct ralink_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
-static struct ralink_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
-static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
-static struct ralink_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
-static struct ralink_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
-static struct ralink_pmx_func uartf_grp[] = {
+static struct ralink_pmx_func rgmii1_func[] = { FUNC("rgmii1", 0, 24, 12) };
+static struct ralink_pmx_func refclk_func[] = { FUNC("spi refclk", 0, 37, 3) };
+static struct ralink_pmx_func ephy_func[] = { FUNC("ephy", 0, 40, 5) };
+static struct ralink_pmx_func rgmii2_func[] = { FUNC("rgmii2", 0, 60, 12) };
+static struct ralink_pmx_func wled_func[] = { FUNC("wled", 0, 72, 1) };
+static struct ralink_pmx_func pa_func[] = { FUNC("pa", 0, 18, 4) };
+static struct ralink_pmx_func uartf_func[] = {
FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
@@ -76,202 +76,202 @@ static struct ralink_pmx_func uartf_grp[] = {
FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct ralink_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func wdt_func[] = {
FUNC("wdt rst", 0, 17, 1),
FUNC("wdt refclk", 0, 17, 1),
};
-static struct ralink_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_func[] = {
FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
};
-static struct ralink_pmx_func nd_sd_grp[] = {
+static struct ralink_pmx_func nd_sd_func[] = {
FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
};
static struct ralink_pmx_group mt7620a_pinmux_data[] = {
- GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
- GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
+ GRP("i2c", i2c_func, 1, MT7620_GPIO_MODE_I2C),
+ GRP("uartf", uartf_func, MT7620_GPIO_MODE_UART0_MASK,
MT7620_GPIO_MODE_UART0_SHIFT),
- GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI),
- GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1),
- GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK,
+ GRP("spi", spi_func, 1, MT7620_GPIO_MODE_SPI),
+ GRP("uartlite", uartlite_func, 1, MT7620_GPIO_MODE_UART1),
+ GRP_G("wdt", wdt_func, MT7620_GPIO_MODE_WDT_MASK,
MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT),
- GRP_G("mdio", mdio_grp, MT7620_GPIO_MODE_MDIO_MASK,
+ GRP_G("mdio", mdio_func, MT7620_GPIO_MODE_MDIO_MASK,
MT7620_GPIO_MODE_MDIO_GPIO, MT7620_GPIO_MODE_MDIO_SHIFT),
- GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1),
- GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
- GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK,
+ GRP("rgmii1", rgmii1_func, 1, MT7620_GPIO_MODE_RGMII1),
+ GRP("spi refclk", refclk_func, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
+ GRP_G("pcie", pcie_rst_func, MT7620_GPIO_MODE_PCIE_MASK,
MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT),
- GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK,
+ GRP_G("nd_sd", nd_sd_func, MT7620_GPIO_MODE_ND_SD_MASK,
MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT),
- GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2),
- GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED),
- GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY),
- GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA),
+ GRP("rgmii2", rgmii2_func, 1, MT7620_GPIO_MODE_RGMII2),
+ GRP("wled", wled_func, 1, MT7620_GPIO_MODE_WLED),
+ GRP("ephy", ephy_func, 1, MT7620_GPIO_MODE_EPHY),
+ GRP("pa", pa_func, 1, MT7620_GPIO_MODE_PA),
{ 0 }
};
-static struct ralink_pmx_func pwm1_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm1_func_mt76x8[] = {
FUNC("sdxc d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
FUNC("pwm1", 0, 19, 1),
};
-static struct ralink_pmx_func pwm0_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm0_func_mt76x8[] = {
FUNC("sdxc d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
FUNC("pwm0", 0, 18, 1),
};
-static struct ralink_pmx_func uart2_grp_mt76x8[] = {
+static struct ralink_pmx_func uart2_func_mt76x8[] = {
FUNC("sdxc d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
FUNC("uart2", 0, 20, 2),
};
-static struct ralink_pmx_func uart1_grp_mt76x8[] = {
+static struct ralink_pmx_func uart1_func_mt76x8[] = {
FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
FUNC("uart1", 0, 45, 2),
};
-static struct ralink_pmx_func i2c_grp_mt76x8[] = {
+static struct ralink_pmx_func i2c_func_mt76x8[] = {
FUNC("-", 3, 4, 2),
FUNC("debug", 2, 4, 2),
FUNC("gpio", 1, 4, 2),
FUNC("i2c", 0, 4, 2),
};
-static struct ralink_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
-static struct ralink_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
-static struct ralink_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
-static struct ralink_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
+static struct ralink_pmx_func refclk_func_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
+static struct ralink_pmx_func perst_func_mt76x8[] = { FUNC("perst", 0, 36, 1) };
+static struct ralink_pmx_func wdt_func_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
+static struct ralink_pmx_func spi_func_mt76x8[] = { FUNC("spi", 0, 7, 4) };
-static struct ralink_pmx_func sd_mode_grp_mt76x8[] = {
+static struct ralink_pmx_func sd_mode_func_mt76x8[] = {
FUNC("jtag", 3, 22, 8),
FUNC("utif", 2, 22, 8),
FUNC("gpio", 1, 22, 8),
FUNC("sdxc", 0, 22, 8),
};
-static struct ralink_pmx_func uart0_grp_mt76x8[] = {
+static struct ralink_pmx_func uart0_func_mt76x8[] = {
FUNC("-", 3, 12, 2),
FUNC("-", 2, 12, 2),
FUNC("gpio", 1, 12, 2),
FUNC("uart0", 0, 12, 2),
};
-static struct ralink_pmx_func i2s_grp_mt76x8[] = {
+static struct ralink_pmx_func i2s_func_mt76x8[] = {
FUNC("antenna", 3, 0, 4),
FUNC("pcm", 2, 0, 4),
FUNC("gpio", 1, 0, 4),
FUNC("i2s", 0, 0, 4),
};
-static struct ralink_pmx_func spi_cs1_grp_mt76x8[] = {
+static struct ralink_pmx_func spi_cs1_func_mt76x8[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
FUNC("spi cs1", 0, 6, 1),
};
-static struct ralink_pmx_func spis_grp_mt76x8[] = {
+static struct ralink_pmx_func spis_func_mt76x8[] = {
FUNC("pwm_uart2", 3, 14, 4),
FUNC("utif", 2, 14, 4),
FUNC("gpio", 1, 14, 4),
FUNC("spis", 0, 14, 4),
};
-static struct ralink_pmx_func gpio_grp_mt76x8[] = {
+static struct ralink_pmx_func gpio_func_mt76x8[] = {
FUNC("pcie", 3, 11, 1),
FUNC("refclk", 2, 11, 1),
FUNC("gpio", 1, 11, 1),
FUNC("gpio", 0, 11, 1),
};
-static struct ralink_pmx_func p4led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 30, 1),
FUNC("utif", 2, 30, 1),
FUNC("gpio", 1, 30, 1),
FUNC("p4led_kn", 0, 30, 1),
};
-static struct ralink_pmx_func p3led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 31, 1),
FUNC("utif", 2, 31, 1),
FUNC("gpio", 1, 31, 1),
FUNC("p3led_kn", 0, 31, 1),
};
-static struct ralink_pmx_func p2led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 32, 1),
FUNC("utif", 2, 32, 1),
FUNC("gpio", 1, 32, 1),
FUNC("p2led_kn", 0, 32, 1),
};
-static struct ralink_pmx_func p1led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 33, 1),
FUNC("utif", 2, 33, 1),
FUNC("gpio", 1, 33, 1),
FUNC("p1led_kn", 0, 33, 1),
};
-static struct ralink_pmx_func p0led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 34, 1),
FUNC("rsvd", 2, 34, 1),
FUNC("gpio", 1, 34, 1),
FUNC("p0led_kn", 0, 34, 1),
};
-static struct ralink_pmx_func wled_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_kn_func_mt76x8[] = {
FUNC("rsvd", 3, 35, 1),
FUNC("rsvd", 2, 35, 1),
FUNC("gpio", 1, 35, 1),
FUNC("wled_kn", 0, 35, 1),
};
-static struct ralink_pmx_func p4led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_an_func_mt76x8[] = {
FUNC("jtag", 3, 39, 1),
FUNC("utif", 2, 39, 1),
FUNC("gpio", 1, 39, 1),
FUNC("p4led_an", 0, 39, 1),
};
-static struct ralink_pmx_func p3led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_an_func_mt76x8[] = {
FUNC("jtag", 3, 40, 1),
FUNC("utif", 2, 40, 1),
FUNC("gpio", 1, 40, 1),
FUNC("p3led_an", 0, 40, 1),
};
-static struct ralink_pmx_func p2led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_an_func_mt76x8[] = {
FUNC("jtag", 3, 41, 1),
FUNC("utif", 2, 41, 1),
FUNC("gpio", 1, 41, 1),
FUNC("p2led_an", 0, 41, 1),
};
-static struct ralink_pmx_func p1led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_an_func_mt76x8[] = {
FUNC("jtag", 3, 42, 1),
FUNC("utif", 2, 42, 1),
FUNC("gpio", 1, 42, 1),
FUNC("p1led_an", 0, 42, 1),
};
-static struct ralink_pmx_func p0led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_an_func_mt76x8[] = {
FUNC("jtag", 3, 43, 1),
FUNC("rsvd", 2, 43, 1),
FUNC("gpio", 1, 43, 1),
FUNC("p0led_an", 0, 43, 1),
};
-static struct ralink_pmx_func wled_an_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_an_func_mt76x8[] = {
FUNC("rsvd", 3, 44, 1),
FUNC("rsvd", 2, 44, 1),
FUNC("gpio", 1, 44, 1),
@@ -309,55 +309,55 @@ static struct ralink_pmx_func wled_an_grp_mt76x8[] = {
#define MT76X8_GPIO_MODE_GPIO 0
static struct ralink_pmx_group mt76x8_pinmux_data[] = {
- GRP_G("pwm1", pwm1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("pwm1", pwm1_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_PWM1),
- GRP_G("pwm0", pwm0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("pwm0", pwm0_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_PWM0),
- GRP_G("uart2", uart2_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("uart2", uart2_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_UART2),
- GRP_G("uart1", uart1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("uart1", uart1_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_UART1),
- GRP_G("i2c", i2c_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("i2c", i2c_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_I2C),
- GRP("refclk", refclk_grp_mt76x8, 1, MT76X8_GPIO_MODE_REFCLK),
- GRP("perst", perst_grp_mt76x8, 1, MT76X8_GPIO_MODE_PERST),
- GRP("wdt", wdt_grp_mt76x8, 1, MT76X8_GPIO_MODE_WDT),
- GRP("spi", spi_grp_mt76x8, 1, MT76X8_GPIO_MODE_SPI),
- GRP_G("sdmode", sd_mode_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP("refclk", refclk_func_mt76x8, 1, MT76X8_GPIO_MODE_REFCLK),
+ GRP("perst", perst_func_mt76x8, 1, MT76X8_GPIO_MODE_PERST),
+ GRP("wdt", wdt_func_mt76x8, 1, MT76X8_GPIO_MODE_WDT),
+ GRP("spi", spi_func_mt76x8, 1, MT76X8_GPIO_MODE_SPI),
+ GRP_G("sdmode", sd_mode_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_SDMODE),
- GRP_G("uart0", uart0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("uart0", uart0_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_UART0),
- GRP_G("i2s", i2s_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("i2s", i2s_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_I2S),
- GRP_G("spi cs1", spi_cs1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("spi cs1", spi_cs1_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_CS1),
- GRP_G("spis", spis_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("spis", spis_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_SPIS),
- GRP_G("gpio", gpio_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("gpio", gpio_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_GPIO),
- GRP_G("wled_an", wled_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("wled_an", wled_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_WLED_AN),
- GRP_G("p0led_an", p0led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p0led_an", p0led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P0LED_AN),
- GRP_G("p1led_an", p1led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p1led_an", p1led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P1LED_AN),
- GRP_G("p2led_an", p2led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p2led_an", p2led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P2LED_AN),
- GRP_G("p3led_an", p3led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p3led_an", p3led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P3LED_AN),
- GRP_G("p4led_an", p4led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p4led_an", p4led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P4LED_AN),
- GRP_G("wled_kn", wled_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("wled_kn", wled_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_WLED_KN),
- GRP_G("p0led_kn", p0led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p0led_kn", p0led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P0LED_KN),
- GRP_G("p1led_kn", p1led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p1led_kn", p1led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P1LED_KN),
- GRP_G("p2led_kn", p2led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p2led_kn", p2led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P2LED_KN),
- GRP_G("p3led_kn", p3led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p3led_kn", p3led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P3LED_KN),
- GRP_G("p4led_kn", p4led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p4led_kn", p4led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P4LED_KN),
{ 0 }
};
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index bad4f1a8cf3f..1470250ca3b7 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -34,59 +34,59 @@
#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
#define MT7621_GPIO_MODE_SDHCI_GPIO 1
-static struct ralink_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
-static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
-static struct ralink_pmx_func uart3_grp[] = {
+static struct ralink_pmx_func uart1_func[] = { FUNC("uart1", 0, 1, 2) };
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 3, 2) };
+static struct ralink_pmx_func uart3_func[] = {
FUNC("uart3", 0, 5, 4),
FUNC("i2s", 2, 5, 4),
FUNC("spdif3", 3, 5, 4),
};
-static struct ralink_pmx_func uart2_grp[] = {
+static struct ralink_pmx_func uart2_func[] = {
FUNC("uart2", 0, 9, 4),
FUNC("pcm", 2, 9, 4),
FUNC("spdif2", 3, 9, 4),
};
-static struct ralink_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
-static struct ralink_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 13, 5) };
+static struct ralink_pmx_func wdt_func[] = {
FUNC("wdt rst", 0, 18, 1),
FUNC("wdt refclk", 2, 18, 1),
};
-static struct ralink_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_func[] = {
FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
};
-static struct ralink_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
-static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
-static struct ralink_pmx_func spi_grp[] = {
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 20, 2) };
+static struct ralink_pmx_func rgmii2_func[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct ralink_pmx_func spi_func[] = {
FUNC("spi", 0, 34, 7),
FUNC("nand1", 2, 34, 7),
};
-static struct ralink_pmx_func sdhci_grp[] = {
+static struct ralink_pmx_func sdhci_func[] = {
FUNC("sdhci", 0, 41, 8),
FUNC("nand2", 2, 41, 8),
};
-static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+static struct ralink_pmx_func rgmii1_func[] = { FUNC("rgmii1", 0, 49, 12) };
static struct ralink_pmx_group mt7621_pinmux_data[] = {
- GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
- GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
- GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
+ GRP("uart1", uart1_func, 1, MT7621_GPIO_MODE_UART1),
+ GRP("i2c", i2c_func, 1, MT7621_GPIO_MODE_I2C),
+ GRP_G("uart3", uart3_func, MT7621_GPIO_MODE_UART3_MASK,
MT7621_GPIO_MODE_UART3_GPIO, MT7621_GPIO_MODE_UART3_SHIFT),
- GRP_G("uart2", uart2_grp, MT7621_GPIO_MODE_UART2_MASK,
+ GRP_G("uart2", uart2_func, MT7621_GPIO_MODE_UART2_MASK,
MT7621_GPIO_MODE_UART2_GPIO, MT7621_GPIO_MODE_UART2_SHIFT),
- GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
- GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
+ GRP("jtag", jtag_func, 1, MT7621_GPIO_MODE_JTAG),
+ GRP_G("wdt", wdt_func, MT7621_GPIO_MODE_WDT_MASK,
MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
- GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
+ GRP_G("pcie", pcie_rst_func, MT7621_GPIO_MODE_PCIE_MASK,
MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
- GRP_G("mdio", mdio_grp, MT7621_GPIO_MODE_MDIO_MASK,
+ GRP_G("mdio", mdio_func, MT7621_GPIO_MODE_MDIO_MASK,
MT7621_GPIO_MODE_MDIO_GPIO, MT7621_GPIO_MODE_MDIO_SHIFT),
- GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
- GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
+ GRP("rgmii2", rgmii2_func, 1, MT7621_GPIO_MODE_RGMII2),
+ GRP_G("spi", spi_func, MT7621_GPIO_MODE_SPI_MASK,
MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
- GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
+ GRP_G("sdhci", sdhci_func, MT7621_GPIO_MODE_SDHCI_MASK,
MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
- GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
+ GRP("rgmii1", rgmii1_func, 1, MT7621_GPIO_MODE_RGMII1),
{ 0 }
};
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 05/14] pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Variables for functions include "grp" on the Ralink MT7620 and MT7621
subdrivers. Rename them to "func" instead as they define the functions for
the pin groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 164 ++++++++++++------------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 48 +++----
2 files changed, 106 insertions(+), 106 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index a790f3944314..fde269c68a7b 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -54,20 +54,20 @@
#define MT7620_GPIO_MODE_EPHY 15
#define MT7620_GPIO_MODE_PA 20
-static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
-static struct ralink_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
-static struct ralink_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
-static struct ralink_pmx_func mdio_grp[] = {
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func mdio_func[] = {
FUNC("mdio", MT7620_GPIO_MODE_MDIO, 22, 2),
FUNC("refclk", MT7620_GPIO_MODE_MDIO_REFCLK, 22, 2),
};
-static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
-static struct ralink_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
-static struct ralink_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
-static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
-static struct ralink_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
-static struct ralink_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
-static struct ralink_pmx_func uartf_grp[] = {
+static struct ralink_pmx_func rgmii1_func[] = { FUNC("rgmii1", 0, 24, 12) };
+static struct ralink_pmx_func refclk_func[] = { FUNC("spi refclk", 0, 37, 3) };
+static struct ralink_pmx_func ephy_func[] = { FUNC("ephy", 0, 40, 5) };
+static struct ralink_pmx_func rgmii2_func[] = { FUNC("rgmii2", 0, 60, 12) };
+static struct ralink_pmx_func wled_func[] = { FUNC("wled", 0, 72, 1) };
+static struct ralink_pmx_func pa_func[] = { FUNC("pa", 0, 18, 4) };
+static struct ralink_pmx_func uartf_func[] = {
FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
@@ -76,202 +76,202 @@ static struct ralink_pmx_func uartf_grp[] = {
FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct ralink_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func wdt_func[] = {
FUNC("wdt rst", 0, 17, 1),
FUNC("wdt refclk", 0, 17, 1),
};
-static struct ralink_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_func[] = {
FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
};
-static struct ralink_pmx_func nd_sd_grp[] = {
+static struct ralink_pmx_func nd_sd_func[] = {
FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
};
static struct ralink_pmx_group mt7620a_pinmux_data[] = {
- GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
- GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
+ GRP("i2c", i2c_func, 1, MT7620_GPIO_MODE_I2C),
+ GRP("uartf", uartf_func, MT7620_GPIO_MODE_UART0_MASK,
MT7620_GPIO_MODE_UART0_SHIFT),
- GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI),
- GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1),
- GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK,
+ GRP("spi", spi_func, 1, MT7620_GPIO_MODE_SPI),
+ GRP("uartlite", uartlite_func, 1, MT7620_GPIO_MODE_UART1),
+ GRP_G("wdt", wdt_func, MT7620_GPIO_MODE_WDT_MASK,
MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT),
- GRP_G("mdio", mdio_grp, MT7620_GPIO_MODE_MDIO_MASK,
+ GRP_G("mdio", mdio_func, MT7620_GPIO_MODE_MDIO_MASK,
MT7620_GPIO_MODE_MDIO_GPIO, MT7620_GPIO_MODE_MDIO_SHIFT),
- GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1),
- GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
- GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK,
+ GRP("rgmii1", rgmii1_func, 1, MT7620_GPIO_MODE_RGMII1),
+ GRP("spi refclk", refclk_func, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
+ GRP_G("pcie", pcie_rst_func, MT7620_GPIO_MODE_PCIE_MASK,
MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT),
- GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK,
+ GRP_G("nd_sd", nd_sd_func, MT7620_GPIO_MODE_ND_SD_MASK,
MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT),
- GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2),
- GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED),
- GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY),
- GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA),
+ GRP("rgmii2", rgmii2_func, 1, MT7620_GPIO_MODE_RGMII2),
+ GRP("wled", wled_func, 1, MT7620_GPIO_MODE_WLED),
+ GRP("ephy", ephy_func, 1, MT7620_GPIO_MODE_EPHY),
+ GRP("pa", pa_func, 1, MT7620_GPIO_MODE_PA),
{ 0 }
};
-static struct ralink_pmx_func pwm1_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm1_func_mt76x8[] = {
FUNC("sdxc d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
FUNC("pwm1", 0, 19, 1),
};
-static struct ralink_pmx_func pwm0_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm0_func_mt76x8[] = {
FUNC("sdxc d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
FUNC("pwm0", 0, 18, 1),
};
-static struct ralink_pmx_func uart2_grp_mt76x8[] = {
+static struct ralink_pmx_func uart2_func_mt76x8[] = {
FUNC("sdxc d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
FUNC("uart2", 0, 20, 2),
};
-static struct ralink_pmx_func uart1_grp_mt76x8[] = {
+static struct ralink_pmx_func uart1_func_mt76x8[] = {
FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
FUNC("uart1", 0, 45, 2),
};
-static struct ralink_pmx_func i2c_grp_mt76x8[] = {
+static struct ralink_pmx_func i2c_func_mt76x8[] = {
FUNC("-", 3, 4, 2),
FUNC("debug", 2, 4, 2),
FUNC("gpio", 1, 4, 2),
FUNC("i2c", 0, 4, 2),
};
-static struct ralink_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
-static struct ralink_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
-static struct ralink_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
-static struct ralink_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
+static struct ralink_pmx_func refclk_func_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
+static struct ralink_pmx_func perst_func_mt76x8[] = { FUNC("perst", 0, 36, 1) };
+static struct ralink_pmx_func wdt_func_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
+static struct ralink_pmx_func spi_func_mt76x8[] = { FUNC("spi", 0, 7, 4) };
-static struct ralink_pmx_func sd_mode_grp_mt76x8[] = {
+static struct ralink_pmx_func sd_mode_func_mt76x8[] = {
FUNC("jtag", 3, 22, 8),
FUNC("utif", 2, 22, 8),
FUNC("gpio", 1, 22, 8),
FUNC("sdxc", 0, 22, 8),
};
-static struct ralink_pmx_func uart0_grp_mt76x8[] = {
+static struct ralink_pmx_func uart0_func_mt76x8[] = {
FUNC("-", 3, 12, 2),
FUNC("-", 2, 12, 2),
FUNC("gpio", 1, 12, 2),
FUNC("uart0", 0, 12, 2),
};
-static struct ralink_pmx_func i2s_grp_mt76x8[] = {
+static struct ralink_pmx_func i2s_func_mt76x8[] = {
FUNC("antenna", 3, 0, 4),
FUNC("pcm", 2, 0, 4),
FUNC("gpio", 1, 0, 4),
FUNC("i2s", 0, 0, 4),
};
-static struct ralink_pmx_func spi_cs1_grp_mt76x8[] = {
+static struct ralink_pmx_func spi_cs1_func_mt76x8[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
FUNC("spi cs1", 0, 6, 1),
};
-static struct ralink_pmx_func spis_grp_mt76x8[] = {
+static struct ralink_pmx_func spis_func_mt76x8[] = {
FUNC("pwm_uart2", 3, 14, 4),
FUNC("utif", 2, 14, 4),
FUNC("gpio", 1, 14, 4),
FUNC("spis", 0, 14, 4),
};
-static struct ralink_pmx_func gpio_grp_mt76x8[] = {
+static struct ralink_pmx_func gpio_func_mt76x8[] = {
FUNC("pcie", 3, 11, 1),
FUNC("refclk", 2, 11, 1),
FUNC("gpio", 1, 11, 1),
FUNC("gpio", 0, 11, 1),
};
-static struct ralink_pmx_func p4led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 30, 1),
FUNC("utif", 2, 30, 1),
FUNC("gpio", 1, 30, 1),
FUNC("p4led_kn", 0, 30, 1),
};
-static struct ralink_pmx_func p3led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 31, 1),
FUNC("utif", 2, 31, 1),
FUNC("gpio", 1, 31, 1),
FUNC("p3led_kn", 0, 31, 1),
};
-static struct ralink_pmx_func p2led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 32, 1),
FUNC("utif", 2, 32, 1),
FUNC("gpio", 1, 32, 1),
FUNC("p2led_kn", 0, 32, 1),
};
-static struct ralink_pmx_func p1led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 33, 1),
FUNC("utif", 2, 33, 1),
FUNC("gpio", 1, 33, 1),
FUNC("p1led_kn", 0, 33, 1),
};
-static struct ralink_pmx_func p0led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 34, 1),
FUNC("rsvd", 2, 34, 1),
FUNC("gpio", 1, 34, 1),
FUNC("p0led_kn", 0, 34, 1),
};
-static struct ralink_pmx_func wled_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_kn_func_mt76x8[] = {
FUNC("rsvd", 3, 35, 1),
FUNC("rsvd", 2, 35, 1),
FUNC("gpio", 1, 35, 1),
FUNC("wled_kn", 0, 35, 1),
};
-static struct ralink_pmx_func p4led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_an_func_mt76x8[] = {
FUNC("jtag", 3, 39, 1),
FUNC("utif", 2, 39, 1),
FUNC("gpio", 1, 39, 1),
FUNC("p4led_an", 0, 39, 1),
};
-static struct ralink_pmx_func p3led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_an_func_mt76x8[] = {
FUNC("jtag", 3, 40, 1),
FUNC("utif", 2, 40, 1),
FUNC("gpio", 1, 40, 1),
FUNC("p3led_an", 0, 40, 1),
};
-static struct ralink_pmx_func p2led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_an_func_mt76x8[] = {
FUNC("jtag", 3, 41, 1),
FUNC("utif", 2, 41, 1),
FUNC("gpio", 1, 41, 1),
FUNC("p2led_an", 0, 41, 1),
};
-static struct ralink_pmx_func p1led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_an_func_mt76x8[] = {
FUNC("jtag", 3, 42, 1),
FUNC("utif", 2, 42, 1),
FUNC("gpio", 1, 42, 1),
FUNC("p1led_an", 0, 42, 1),
};
-static struct ralink_pmx_func p0led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_an_func_mt76x8[] = {
FUNC("jtag", 3, 43, 1),
FUNC("rsvd", 2, 43, 1),
FUNC("gpio", 1, 43, 1),
FUNC("p0led_an", 0, 43, 1),
};
-static struct ralink_pmx_func wled_an_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_an_func_mt76x8[] = {
FUNC("rsvd", 3, 44, 1),
FUNC("rsvd", 2, 44, 1),
FUNC("gpio", 1, 44, 1),
@@ -309,55 +309,55 @@ static struct ralink_pmx_func wled_an_grp_mt76x8[] = {
#define MT76X8_GPIO_MODE_GPIO 0
static struct ralink_pmx_group mt76x8_pinmux_data[] = {
- GRP_G("pwm1", pwm1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("pwm1", pwm1_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_PWM1),
- GRP_G("pwm0", pwm0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("pwm0", pwm0_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_PWM0),
- GRP_G("uart2", uart2_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("uart2", uart2_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_UART2),
- GRP_G("uart1", uart1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("uart1", uart1_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_UART1),
- GRP_G("i2c", i2c_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("i2c", i2c_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_I2C),
- GRP("refclk", refclk_grp_mt76x8, 1, MT76X8_GPIO_MODE_REFCLK),
- GRP("perst", perst_grp_mt76x8, 1, MT76X8_GPIO_MODE_PERST),
- GRP("wdt", wdt_grp_mt76x8, 1, MT76X8_GPIO_MODE_WDT),
- GRP("spi", spi_grp_mt76x8, 1, MT76X8_GPIO_MODE_SPI),
- GRP_G("sdmode", sd_mode_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP("refclk", refclk_func_mt76x8, 1, MT76X8_GPIO_MODE_REFCLK),
+ GRP("perst", perst_func_mt76x8, 1, MT76X8_GPIO_MODE_PERST),
+ GRP("wdt", wdt_func_mt76x8, 1, MT76X8_GPIO_MODE_WDT),
+ GRP("spi", spi_func_mt76x8, 1, MT76X8_GPIO_MODE_SPI),
+ GRP_G("sdmode", sd_mode_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_SDMODE),
- GRP_G("uart0", uart0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("uart0", uart0_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_UART0),
- GRP_G("i2s", i2s_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("i2s", i2s_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_I2S),
- GRP_G("spi cs1", spi_cs1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("spi cs1", spi_cs1_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_CS1),
- GRP_G("spis", spis_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("spis", spis_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_SPIS),
- GRP_G("gpio", gpio_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("gpio", gpio_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_GPIO),
- GRP_G("wled_an", wled_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("wled_an", wled_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_WLED_AN),
- GRP_G("p0led_an", p0led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p0led_an", p0led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P0LED_AN),
- GRP_G("p1led_an", p1led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p1led_an", p1led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P1LED_AN),
- GRP_G("p2led_an", p2led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p2led_an", p2led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P2LED_AN),
- GRP_G("p3led_an", p3led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p3led_an", p3led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P3LED_AN),
- GRP_G("p4led_an", p4led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p4led_an", p4led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P4LED_AN),
- GRP_G("wled_kn", wled_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("wled_kn", wled_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_WLED_KN),
- GRP_G("p0led_kn", p0led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p0led_kn", p0led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P0LED_KN),
- GRP_G("p1led_kn", p1led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p1led_kn", p1led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P1LED_KN),
- GRP_G("p2led_kn", p2led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p2led_kn", p2led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P2LED_KN),
- GRP_G("p3led_kn", p3led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p3led_kn", p3led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P3LED_KN),
- GRP_G("p4led_kn", p4led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p4led_kn", p4led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P4LED_KN),
{ 0 }
};
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index bad4f1a8cf3f..1470250ca3b7 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -34,59 +34,59 @@
#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
#define MT7621_GPIO_MODE_SDHCI_GPIO 1
-static struct ralink_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
-static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
-static struct ralink_pmx_func uart3_grp[] = {
+static struct ralink_pmx_func uart1_func[] = { FUNC("uart1", 0, 1, 2) };
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 3, 2) };
+static struct ralink_pmx_func uart3_func[] = {
FUNC("uart3", 0, 5, 4),
FUNC("i2s", 2, 5, 4),
FUNC("spdif3", 3, 5, 4),
};
-static struct ralink_pmx_func uart2_grp[] = {
+static struct ralink_pmx_func uart2_func[] = {
FUNC("uart2", 0, 9, 4),
FUNC("pcm", 2, 9, 4),
FUNC("spdif2", 3, 9, 4),
};
-static struct ralink_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
-static struct ralink_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 13, 5) };
+static struct ralink_pmx_func wdt_func[] = {
FUNC("wdt rst", 0, 18, 1),
FUNC("wdt refclk", 2, 18, 1),
};
-static struct ralink_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_func[] = {
FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
};
-static struct ralink_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
-static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
-static struct ralink_pmx_func spi_grp[] = {
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 20, 2) };
+static struct ralink_pmx_func rgmii2_func[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct ralink_pmx_func spi_func[] = {
FUNC("spi", 0, 34, 7),
FUNC("nand1", 2, 34, 7),
};
-static struct ralink_pmx_func sdhci_grp[] = {
+static struct ralink_pmx_func sdhci_func[] = {
FUNC("sdhci", 0, 41, 8),
FUNC("nand2", 2, 41, 8),
};
-static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+static struct ralink_pmx_func rgmii1_func[] = { FUNC("rgmii1", 0, 49, 12) };
static struct ralink_pmx_group mt7621_pinmux_data[] = {
- GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
- GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
- GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
+ GRP("uart1", uart1_func, 1, MT7621_GPIO_MODE_UART1),
+ GRP("i2c", i2c_func, 1, MT7621_GPIO_MODE_I2C),
+ GRP_G("uart3", uart3_func, MT7621_GPIO_MODE_UART3_MASK,
MT7621_GPIO_MODE_UART3_GPIO, MT7621_GPIO_MODE_UART3_SHIFT),
- GRP_G("uart2", uart2_grp, MT7621_GPIO_MODE_UART2_MASK,
+ GRP_G("uart2", uart2_func, MT7621_GPIO_MODE_UART2_MASK,
MT7621_GPIO_MODE_UART2_GPIO, MT7621_GPIO_MODE_UART2_SHIFT),
- GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
- GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
+ GRP("jtag", jtag_func, 1, MT7621_GPIO_MODE_JTAG),
+ GRP_G("wdt", wdt_func, MT7621_GPIO_MODE_WDT_MASK,
MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
- GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
+ GRP_G("pcie", pcie_rst_func, MT7621_GPIO_MODE_PCIE_MASK,
MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
- GRP_G("mdio", mdio_grp, MT7621_GPIO_MODE_MDIO_MASK,
+ GRP_G("mdio", mdio_func, MT7621_GPIO_MODE_MDIO_MASK,
MT7621_GPIO_MODE_MDIO_GPIO, MT7621_GPIO_MODE_MDIO_SHIFT),
- GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
- GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
+ GRP("rgmii2", rgmii2_func, 1, MT7621_GPIO_MODE_RGMII2),
+ GRP_G("spi", spi_func, MT7621_GPIO_MODE_SPI_MASK,
MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
- GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
+ GRP_G("sdhci", sdhci_func, MT7621_GPIO_MODE_SDHCI_MASK,
MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
- GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
+ GRP("rgmii1", rgmii1_func, 1, MT7621_GPIO_MODE_RGMII1),
{ 0 }
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 05/14] pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Variables for functions include "grp" on the Ralink MT7620 and MT7621
subdrivers. Rename them to "func" instead as they define the functions for
the pin groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 164 ++++++++++++------------
drivers/pinctrl/ralink/pinctrl-mt7621.c | 48 +++----
2 files changed, 106 insertions(+), 106 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index a790f3944314..fde269c68a7b 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -54,20 +54,20 @@
#define MT7620_GPIO_MODE_EPHY 15
#define MT7620_GPIO_MODE_PA 20
-static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
-static struct ralink_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
-static struct ralink_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
-static struct ralink_pmx_func mdio_grp[] = {
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct ralink_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct ralink_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
+static struct ralink_pmx_func mdio_func[] = {
FUNC("mdio", MT7620_GPIO_MODE_MDIO, 22, 2),
FUNC("refclk", MT7620_GPIO_MODE_MDIO_REFCLK, 22, 2),
};
-static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
-static struct ralink_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
-static struct ralink_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
-static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
-static struct ralink_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
-static struct ralink_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
-static struct ralink_pmx_func uartf_grp[] = {
+static struct ralink_pmx_func rgmii1_func[] = { FUNC("rgmii1", 0, 24, 12) };
+static struct ralink_pmx_func refclk_func[] = { FUNC("spi refclk", 0, 37, 3) };
+static struct ralink_pmx_func ephy_func[] = { FUNC("ephy", 0, 40, 5) };
+static struct ralink_pmx_func rgmii2_func[] = { FUNC("rgmii2", 0, 60, 12) };
+static struct ralink_pmx_func wled_func[] = { FUNC("wled", 0, 72, 1) };
+static struct ralink_pmx_func pa_func[] = { FUNC("pa", 0, 18, 4) };
+static struct ralink_pmx_func uartf_func[] = {
FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
@@ -76,202 +76,202 @@ static struct ralink_pmx_func uartf_grp[] = {
FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
};
-static struct ralink_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func wdt_func[] = {
FUNC("wdt rst", 0, 17, 1),
FUNC("wdt refclk", 0, 17, 1),
};
-static struct ralink_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_func[] = {
FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
};
-static struct ralink_pmx_func nd_sd_grp[] = {
+static struct ralink_pmx_func nd_sd_func[] = {
FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
};
static struct ralink_pmx_group mt7620a_pinmux_data[] = {
- GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
- GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
+ GRP("i2c", i2c_func, 1, MT7620_GPIO_MODE_I2C),
+ GRP("uartf", uartf_func, MT7620_GPIO_MODE_UART0_MASK,
MT7620_GPIO_MODE_UART0_SHIFT),
- GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI),
- GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1),
- GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK,
+ GRP("spi", spi_func, 1, MT7620_GPIO_MODE_SPI),
+ GRP("uartlite", uartlite_func, 1, MT7620_GPIO_MODE_UART1),
+ GRP_G("wdt", wdt_func, MT7620_GPIO_MODE_WDT_MASK,
MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT),
- GRP_G("mdio", mdio_grp, MT7620_GPIO_MODE_MDIO_MASK,
+ GRP_G("mdio", mdio_func, MT7620_GPIO_MODE_MDIO_MASK,
MT7620_GPIO_MODE_MDIO_GPIO, MT7620_GPIO_MODE_MDIO_SHIFT),
- GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1),
- GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
- GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK,
+ GRP("rgmii1", rgmii1_func, 1, MT7620_GPIO_MODE_RGMII1),
+ GRP("spi refclk", refclk_func, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
+ GRP_G("pcie", pcie_rst_func, MT7620_GPIO_MODE_PCIE_MASK,
MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT),
- GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK,
+ GRP_G("nd_sd", nd_sd_func, MT7620_GPIO_MODE_ND_SD_MASK,
MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT),
- GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2),
- GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED),
- GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY),
- GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA),
+ GRP("rgmii2", rgmii2_func, 1, MT7620_GPIO_MODE_RGMII2),
+ GRP("wled", wled_func, 1, MT7620_GPIO_MODE_WLED),
+ GRP("ephy", ephy_func, 1, MT7620_GPIO_MODE_EPHY),
+ GRP("pa", pa_func, 1, MT7620_GPIO_MODE_PA),
{ 0 }
};
-static struct ralink_pmx_func pwm1_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm1_func_mt76x8[] = {
FUNC("sdxc d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
FUNC("pwm1", 0, 19, 1),
};
-static struct ralink_pmx_func pwm0_grp_mt76x8[] = {
+static struct ralink_pmx_func pwm0_func_mt76x8[] = {
FUNC("sdxc d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
FUNC("pwm0", 0, 18, 1),
};
-static struct ralink_pmx_func uart2_grp_mt76x8[] = {
+static struct ralink_pmx_func uart2_func_mt76x8[] = {
FUNC("sdxc d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
FUNC("uart2", 0, 20, 2),
};
-static struct ralink_pmx_func uart1_grp_mt76x8[] = {
+static struct ralink_pmx_func uart1_func_mt76x8[] = {
FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
FUNC("uart1", 0, 45, 2),
};
-static struct ralink_pmx_func i2c_grp_mt76x8[] = {
+static struct ralink_pmx_func i2c_func_mt76x8[] = {
FUNC("-", 3, 4, 2),
FUNC("debug", 2, 4, 2),
FUNC("gpio", 1, 4, 2),
FUNC("i2c", 0, 4, 2),
};
-static struct ralink_pmx_func refclk_grp_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
-static struct ralink_pmx_func perst_grp_mt76x8[] = { FUNC("perst", 0, 36, 1) };
-static struct ralink_pmx_func wdt_grp_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
-static struct ralink_pmx_func spi_grp_mt76x8[] = { FUNC("spi", 0, 7, 4) };
+static struct ralink_pmx_func refclk_func_mt76x8[] = { FUNC("refclk", 0, 37, 1) };
+static struct ralink_pmx_func perst_func_mt76x8[] = { FUNC("perst", 0, 36, 1) };
+static struct ralink_pmx_func wdt_func_mt76x8[] = { FUNC("wdt", 0, 38, 1) };
+static struct ralink_pmx_func spi_func_mt76x8[] = { FUNC("spi", 0, 7, 4) };
-static struct ralink_pmx_func sd_mode_grp_mt76x8[] = {
+static struct ralink_pmx_func sd_mode_func_mt76x8[] = {
FUNC("jtag", 3, 22, 8),
FUNC("utif", 2, 22, 8),
FUNC("gpio", 1, 22, 8),
FUNC("sdxc", 0, 22, 8),
};
-static struct ralink_pmx_func uart0_grp_mt76x8[] = {
+static struct ralink_pmx_func uart0_func_mt76x8[] = {
FUNC("-", 3, 12, 2),
FUNC("-", 2, 12, 2),
FUNC("gpio", 1, 12, 2),
FUNC("uart0", 0, 12, 2),
};
-static struct ralink_pmx_func i2s_grp_mt76x8[] = {
+static struct ralink_pmx_func i2s_func_mt76x8[] = {
FUNC("antenna", 3, 0, 4),
FUNC("pcm", 2, 0, 4),
FUNC("gpio", 1, 0, 4),
FUNC("i2s", 0, 0, 4),
};
-static struct ralink_pmx_func spi_cs1_grp_mt76x8[] = {
+static struct ralink_pmx_func spi_cs1_func_mt76x8[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
FUNC("spi cs1", 0, 6, 1),
};
-static struct ralink_pmx_func spis_grp_mt76x8[] = {
+static struct ralink_pmx_func spis_func_mt76x8[] = {
FUNC("pwm_uart2", 3, 14, 4),
FUNC("utif", 2, 14, 4),
FUNC("gpio", 1, 14, 4),
FUNC("spis", 0, 14, 4),
};
-static struct ralink_pmx_func gpio_grp_mt76x8[] = {
+static struct ralink_pmx_func gpio_func_mt76x8[] = {
FUNC("pcie", 3, 11, 1),
FUNC("refclk", 2, 11, 1),
FUNC("gpio", 1, 11, 1),
FUNC("gpio", 0, 11, 1),
};
-static struct ralink_pmx_func p4led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 30, 1),
FUNC("utif", 2, 30, 1),
FUNC("gpio", 1, 30, 1),
FUNC("p4led_kn", 0, 30, 1),
};
-static struct ralink_pmx_func p3led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 31, 1),
FUNC("utif", 2, 31, 1),
FUNC("gpio", 1, 31, 1),
FUNC("p3led_kn", 0, 31, 1),
};
-static struct ralink_pmx_func p2led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 32, 1),
FUNC("utif", 2, 32, 1),
FUNC("gpio", 1, 32, 1),
FUNC("p2led_kn", 0, 32, 1),
};
-static struct ralink_pmx_func p1led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 33, 1),
FUNC("utif", 2, 33, 1),
FUNC("gpio", 1, 33, 1),
FUNC("p1led_kn", 0, 33, 1),
};
-static struct ralink_pmx_func p0led_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_kn_func_mt76x8[] = {
FUNC("jtag", 3, 34, 1),
FUNC("rsvd", 2, 34, 1),
FUNC("gpio", 1, 34, 1),
FUNC("p0led_kn", 0, 34, 1),
};
-static struct ralink_pmx_func wled_kn_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_kn_func_mt76x8[] = {
FUNC("rsvd", 3, 35, 1),
FUNC("rsvd", 2, 35, 1),
FUNC("gpio", 1, 35, 1),
FUNC("wled_kn", 0, 35, 1),
};
-static struct ralink_pmx_func p4led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p4led_an_func_mt76x8[] = {
FUNC("jtag", 3, 39, 1),
FUNC("utif", 2, 39, 1),
FUNC("gpio", 1, 39, 1),
FUNC("p4led_an", 0, 39, 1),
};
-static struct ralink_pmx_func p3led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p3led_an_func_mt76x8[] = {
FUNC("jtag", 3, 40, 1),
FUNC("utif", 2, 40, 1),
FUNC("gpio", 1, 40, 1),
FUNC("p3led_an", 0, 40, 1),
};
-static struct ralink_pmx_func p2led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p2led_an_func_mt76x8[] = {
FUNC("jtag", 3, 41, 1),
FUNC("utif", 2, 41, 1),
FUNC("gpio", 1, 41, 1),
FUNC("p2led_an", 0, 41, 1),
};
-static struct ralink_pmx_func p1led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p1led_an_func_mt76x8[] = {
FUNC("jtag", 3, 42, 1),
FUNC("utif", 2, 42, 1),
FUNC("gpio", 1, 42, 1),
FUNC("p1led_an", 0, 42, 1),
};
-static struct ralink_pmx_func p0led_an_grp_mt76x8[] = {
+static struct ralink_pmx_func p0led_an_func_mt76x8[] = {
FUNC("jtag", 3, 43, 1),
FUNC("rsvd", 2, 43, 1),
FUNC("gpio", 1, 43, 1),
FUNC("p0led_an", 0, 43, 1),
};
-static struct ralink_pmx_func wled_an_grp_mt76x8[] = {
+static struct ralink_pmx_func wled_an_func_mt76x8[] = {
FUNC("rsvd", 3, 44, 1),
FUNC("rsvd", 2, 44, 1),
FUNC("gpio", 1, 44, 1),
@@ -309,55 +309,55 @@ static struct ralink_pmx_func wled_an_grp_mt76x8[] = {
#define MT76X8_GPIO_MODE_GPIO 0
static struct ralink_pmx_group mt76x8_pinmux_data[] = {
- GRP_G("pwm1", pwm1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("pwm1", pwm1_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_PWM1),
- GRP_G("pwm0", pwm0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("pwm0", pwm0_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_PWM0),
- GRP_G("uart2", uart2_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("uart2", uart2_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_UART2),
- GRP_G("uart1", uart1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("uart1", uart1_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_UART1),
- GRP_G("i2c", i2c_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("i2c", i2c_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_I2C),
- GRP("refclk", refclk_grp_mt76x8, 1, MT76X8_GPIO_MODE_REFCLK),
- GRP("perst", perst_grp_mt76x8, 1, MT76X8_GPIO_MODE_PERST),
- GRP("wdt", wdt_grp_mt76x8, 1, MT76X8_GPIO_MODE_WDT),
- GRP("spi", spi_grp_mt76x8, 1, MT76X8_GPIO_MODE_SPI),
- GRP_G("sdmode", sd_mode_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP("refclk", refclk_func_mt76x8, 1, MT76X8_GPIO_MODE_REFCLK),
+ GRP("perst", perst_func_mt76x8, 1, MT76X8_GPIO_MODE_PERST),
+ GRP("wdt", wdt_func_mt76x8, 1, MT76X8_GPIO_MODE_WDT),
+ GRP("spi", spi_func_mt76x8, 1, MT76X8_GPIO_MODE_SPI),
+ GRP_G("sdmode", sd_mode_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_SDMODE),
- GRP_G("uart0", uart0_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("uart0", uart0_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_UART0),
- GRP_G("i2s", i2s_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("i2s", i2s_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_I2S),
- GRP_G("spi cs1", spi_cs1_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("spi cs1", spi_cs1_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_CS1),
- GRP_G("spis", spis_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("spis", spis_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_SPIS),
- GRP_G("gpio", gpio_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("gpio", gpio_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_GPIO),
- GRP_G("wled_an", wled_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("wled_an", wled_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_WLED_AN),
- GRP_G("p0led_an", p0led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p0led_an", p0led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P0LED_AN),
- GRP_G("p1led_an", p1led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p1led_an", p1led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P1LED_AN),
- GRP_G("p2led_an", p2led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p2led_an", p2led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P2LED_AN),
- GRP_G("p3led_an", p3led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p3led_an", p3led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P3LED_AN),
- GRP_G("p4led_an", p4led_an_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p4led_an", p4led_an_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P4LED_AN),
- GRP_G("wled_kn", wled_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("wled_kn", wled_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_WLED_KN),
- GRP_G("p0led_kn", p0led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p0led_kn", p0led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P0LED_KN),
- GRP_G("p1led_kn", p1led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p1led_kn", p1led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P1LED_KN),
- GRP_G("p2led_kn", p2led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p2led_kn", p2led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P2LED_KN),
- GRP_G("p3led_kn", p3led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p3led_kn", p3led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P3LED_KN),
- GRP_G("p4led_kn", p4led_kn_grp_mt76x8, MT76X8_GPIO_MODE_MASK,
+ GRP_G("p4led_kn", p4led_kn_func_mt76x8, MT76X8_GPIO_MODE_MASK,
1, MT76X8_GPIO_MODE_P4LED_KN),
{ 0 }
};
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index bad4f1a8cf3f..1470250ca3b7 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -34,59 +34,59 @@
#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
#define MT7621_GPIO_MODE_SDHCI_GPIO 1
-static struct ralink_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
-static struct ralink_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
-static struct ralink_pmx_func uart3_grp[] = {
+static struct ralink_pmx_func uart1_func[] = { FUNC("uart1", 0, 1, 2) };
+static struct ralink_pmx_func i2c_func[] = { FUNC("i2c", 0, 3, 2) };
+static struct ralink_pmx_func uart3_func[] = {
FUNC("uart3", 0, 5, 4),
FUNC("i2s", 2, 5, 4),
FUNC("spdif3", 3, 5, 4),
};
-static struct ralink_pmx_func uart2_grp[] = {
+static struct ralink_pmx_func uart2_func[] = {
FUNC("uart2", 0, 9, 4),
FUNC("pcm", 2, 9, 4),
FUNC("spdif2", 3, 9, 4),
};
-static struct ralink_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
-static struct ralink_pmx_func wdt_grp[] = {
+static struct ralink_pmx_func jtag_func[] = { FUNC("jtag", 0, 13, 5) };
+static struct ralink_pmx_func wdt_func[] = {
FUNC("wdt rst", 0, 18, 1),
FUNC("wdt refclk", 2, 18, 1),
};
-static struct ralink_pmx_func pcie_rst_grp[] = {
+static struct ralink_pmx_func pcie_rst_func[] = {
FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
};
-static struct ralink_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
-static struct ralink_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
-static struct ralink_pmx_func spi_grp[] = {
+static struct ralink_pmx_func mdio_func[] = { FUNC("mdio", 0, 20, 2) };
+static struct ralink_pmx_func rgmii2_func[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct ralink_pmx_func spi_func[] = {
FUNC("spi", 0, 34, 7),
FUNC("nand1", 2, 34, 7),
};
-static struct ralink_pmx_func sdhci_grp[] = {
+static struct ralink_pmx_func sdhci_func[] = {
FUNC("sdhci", 0, 41, 8),
FUNC("nand2", 2, 41, 8),
};
-static struct ralink_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+static struct ralink_pmx_func rgmii1_func[] = { FUNC("rgmii1", 0, 49, 12) };
static struct ralink_pmx_group mt7621_pinmux_data[] = {
- GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
- GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
- GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
+ GRP("uart1", uart1_func, 1, MT7621_GPIO_MODE_UART1),
+ GRP("i2c", i2c_func, 1, MT7621_GPIO_MODE_I2C),
+ GRP_G("uart3", uart3_func, MT7621_GPIO_MODE_UART3_MASK,
MT7621_GPIO_MODE_UART3_GPIO, MT7621_GPIO_MODE_UART3_SHIFT),
- GRP_G("uart2", uart2_grp, MT7621_GPIO_MODE_UART2_MASK,
+ GRP_G("uart2", uart2_func, MT7621_GPIO_MODE_UART2_MASK,
MT7621_GPIO_MODE_UART2_GPIO, MT7621_GPIO_MODE_UART2_SHIFT),
- GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
- GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
+ GRP("jtag", jtag_func, 1, MT7621_GPIO_MODE_JTAG),
+ GRP_G("wdt", wdt_func, MT7621_GPIO_MODE_WDT_MASK,
MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
- GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
+ GRP_G("pcie", pcie_rst_func, MT7621_GPIO_MODE_PCIE_MASK,
MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
- GRP_G("mdio", mdio_grp, MT7621_GPIO_MODE_MDIO_MASK,
+ GRP_G("mdio", mdio_func, MT7621_GPIO_MODE_MDIO_MASK,
MT7621_GPIO_MODE_MDIO_GPIO, MT7621_GPIO_MODE_MDIO_SHIFT),
- GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
- GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
+ GRP("rgmii2", rgmii2_func, 1, MT7621_GPIO_MODE_RGMII2),
+ GRP_G("spi", spi_func, MT7621_GPIO_MODE_SPI_MASK,
MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
- GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
+ GRP_G("sdhci", sdhci_func, MT7621_GPIO_MODE_SDHCI_MASK,
MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
- GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
+ GRP("rgmii1", rgmii1_func, 1, MT7621_GPIO_MODE_RGMII1),
{ 0 }
};
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 06/14] pinctrl: ralink: rename driver names to subdrivers
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
MT7620, MT7621, RT2880, RT305X and RT3883 pinctrl are subdrivers of the
Ralink pinctrl driver. Change the bool for these subdrivers accordingly.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/Kconfig | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/ralink/Kconfig b/drivers/pinctrl/ralink/Kconfig
index aa82acfae827..1e4c5e43d69b 100644
--- a/drivers/pinctrl/ralink/Kconfig
+++ b/drivers/pinctrl/ralink/Kconfig
@@ -8,27 +8,27 @@ config PINCTRL_RALINK
select GENERIC_PINCONF
config PINCTRL_MT7620
- bool "mt7620 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "MT7620 pinctrl subdriver"
depends on RALINK && SOC_MT7620
select PINCTRL_RALINK
config PINCTRL_MT7621
- bool "mt7621 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "MT7621 pinctrl subdriver"
depends on RALINK && SOC_MT7621
select PINCTRL_RALINK
config PINCTRL_RT2880
- bool "RT2880 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "RT2880 pinctrl subdriver"
depends on RALINK && SOC_RT288X
select PINCTRL_RALINK
config PINCTRL_RT305X
- bool "RT305X pinctrl driver for RALINK/Mediatek SOCs"
+ bool "RT305X pinctrl subdriver"
depends on RALINK && SOC_RT305X
select PINCTRL_RALINK
config PINCTRL_RT3883
- bool "RT3883 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "RT3883 pinctrl subdriver"
depends on RALINK && SOC_RT3883
select PINCTRL_RALINK
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 06/14] pinctrl: ralink: rename driver names to subdrivers
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
MT7620, MT7621, RT2880, RT305X and RT3883 pinctrl are subdrivers of the
Ralink pinctrl driver. Change the bool for these subdrivers accordingly.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/Kconfig | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/ralink/Kconfig b/drivers/pinctrl/ralink/Kconfig
index aa82acfae827..1e4c5e43d69b 100644
--- a/drivers/pinctrl/ralink/Kconfig
+++ b/drivers/pinctrl/ralink/Kconfig
@@ -8,27 +8,27 @@ config PINCTRL_RALINK
select GENERIC_PINCONF
config PINCTRL_MT7620
- bool "mt7620 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "MT7620 pinctrl subdriver"
depends on RALINK && SOC_MT7620
select PINCTRL_RALINK
config PINCTRL_MT7621
- bool "mt7621 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "MT7621 pinctrl subdriver"
depends on RALINK && SOC_MT7621
select PINCTRL_RALINK
config PINCTRL_RT2880
- bool "RT2880 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "RT2880 pinctrl subdriver"
depends on RALINK && SOC_RT288X
select PINCTRL_RALINK
config PINCTRL_RT305X
- bool "RT305X pinctrl driver for RALINK/Mediatek SOCs"
+ bool "RT305X pinctrl subdriver"
depends on RALINK && SOC_RT305X
select PINCTRL_RALINK
config PINCTRL_RT3883
- bool "RT3883 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "RT3883 pinctrl subdriver"
depends on RALINK && SOC_RT3883
select PINCTRL_RALINK
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 06/14] pinctrl: ralink: rename driver names to subdrivers
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
MT7620, MT7621, RT2880, RT305X and RT3883 pinctrl are subdrivers of the
Ralink pinctrl driver. Change the bool for these subdrivers accordingly.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/Kconfig | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/ralink/Kconfig b/drivers/pinctrl/ralink/Kconfig
index aa82acfae827..1e4c5e43d69b 100644
--- a/drivers/pinctrl/ralink/Kconfig
+++ b/drivers/pinctrl/ralink/Kconfig
@@ -8,27 +8,27 @@ config PINCTRL_RALINK
select GENERIC_PINCONF
config PINCTRL_MT7620
- bool "mt7620 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "MT7620 pinctrl subdriver"
depends on RALINK && SOC_MT7620
select PINCTRL_RALINK
config PINCTRL_MT7621
- bool "mt7621 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "MT7621 pinctrl subdriver"
depends on RALINK && SOC_MT7621
select PINCTRL_RALINK
config PINCTRL_RT2880
- bool "RT2880 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "RT2880 pinctrl subdriver"
depends on RALINK && SOC_RT288X
select PINCTRL_RALINK
config PINCTRL_RT305X
- bool "RT305X pinctrl driver for RALINK/Mediatek SOCs"
+ bool "RT305X pinctrl subdriver"
depends on RALINK && SOC_RT305X
select PINCTRL_RALINK
config PINCTRL_RT3883
- bool "RT3883 pinctrl driver for RALINK/Mediatek SOCs"
+ bool "RT3883 pinctrl subdriver"
depends on RALINK && SOC_RT3883
select PINCTRL_RALINK
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 07/14] pinctrl: ralink: add new compatible strings for each pinctrl subdriver
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add new compatible strings for each pinctrl subdriver. Change driver name
on all subdrivers accordingly.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-mt7621.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt2880.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt305x.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt3883.c | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index fde269c68a7b..22ff16eff02f 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -371,7 +371,7 @@ static int mt7620_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id mt7620_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,mt7620-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, mt7620_pinctrl_match);
@@ -379,7 +379,7 @@ MODULE_DEVICE_TABLE(of, mt7620_pinctrl_match);
static struct platform_driver mt7620_pinctrl_driver = {
.probe = mt7620_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "mt7620-pinctrl",
.of_match_table = mt7620_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index 1470250ca3b7..b47968f40e0c 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -96,7 +96,7 @@ static int mt7621_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id mt7621_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,mt7621-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, mt7621_pinctrl_match);
@@ -104,7 +104,7 @@ MODULE_DEVICE_TABLE(of, mt7621_pinctrl_match);
static struct platform_driver mt7621_pinctrl_driver = {
.probe = mt7621_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "mt7621-pinctrl",
.of_match_table = mt7621_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-rt2880.c b/drivers/pinctrl/ralink/pinctrl-rt2880.c
index 9c5e828af43a..811e12df1133 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt2880.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt2880.c
@@ -40,7 +40,7 @@ static int rt2880_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id rt2880_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,rt2880-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, rt2880_pinctrl_match);
@@ -48,7 +48,7 @@ MODULE_DEVICE_TABLE(of, rt2880_pinctrl_match);
static struct platform_driver rt2880_pinctrl_driver = {
.probe = rt2880_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "rt2880-pinctrl",
.of_match_table = rt2880_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-rt305x.c b/drivers/pinctrl/ralink/pinctrl-rt305x.c
index b4765ca27cac..5b204b7ca1f3 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt305x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt305x.c
@@ -117,7 +117,7 @@ static int rt305x_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id rt305x_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,rt305x-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, rt305x_pinctrl_match);
@@ -125,7 +125,7 @@ MODULE_DEVICE_TABLE(of, rt305x_pinctrl_match);
static struct platform_driver rt305x_pinctrl_driver = {
.probe = rt305x_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "rt305x-pinctrl",
.of_match_table = rt305x_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-rt3883.c b/drivers/pinctrl/ralink/pinctrl-rt3883.c
index b2e8151de226..44a66c3d2d2a 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt3883.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt3883.c
@@ -87,7 +87,7 @@ static int rt3883_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id rt3883_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,rt3883-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, rt3883_pinctrl_match);
@@ -95,7 +95,7 @@ MODULE_DEVICE_TABLE(of, rt3883_pinctrl_match);
static struct platform_driver rt3883_pinctrl_driver = {
.probe = rt3883_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "rt3883-pinctrl",
.of_match_table = rt3883_pinctrl_match,
},
};
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 07/14] pinctrl: ralink: add new compatible strings for each pinctrl subdriver
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add new compatible strings for each pinctrl subdriver. Change driver name
on all subdrivers accordingly.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-mt7621.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt2880.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt305x.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt3883.c | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index fde269c68a7b..22ff16eff02f 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -371,7 +371,7 @@ static int mt7620_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id mt7620_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,mt7620-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, mt7620_pinctrl_match);
@@ -379,7 +379,7 @@ MODULE_DEVICE_TABLE(of, mt7620_pinctrl_match);
static struct platform_driver mt7620_pinctrl_driver = {
.probe = mt7620_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "mt7620-pinctrl",
.of_match_table = mt7620_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index 1470250ca3b7..b47968f40e0c 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -96,7 +96,7 @@ static int mt7621_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id mt7621_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,mt7621-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, mt7621_pinctrl_match);
@@ -104,7 +104,7 @@ MODULE_DEVICE_TABLE(of, mt7621_pinctrl_match);
static struct platform_driver mt7621_pinctrl_driver = {
.probe = mt7621_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "mt7621-pinctrl",
.of_match_table = mt7621_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-rt2880.c b/drivers/pinctrl/ralink/pinctrl-rt2880.c
index 9c5e828af43a..811e12df1133 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt2880.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt2880.c
@@ -40,7 +40,7 @@ static int rt2880_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id rt2880_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,rt2880-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, rt2880_pinctrl_match);
@@ -48,7 +48,7 @@ MODULE_DEVICE_TABLE(of, rt2880_pinctrl_match);
static struct platform_driver rt2880_pinctrl_driver = {
.probe = rt2880_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "rt2880-pinctrl",
.of_match_table = rt2880_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-rt305x.c b/drivers/pinctrl/ralink/pinctrl-rt305x.c
index b4765ca27cac..5b204b7ca1f3 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt305x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt305x.c
@@ -117,7 +117,7 @@ static int rt305x_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id rt305x_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,rt305x-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, rt305x_pinctrl_match);
@@ -125,7 +125,7 @@ MODULE_DEVICE_TABLE(of, rt305x_pinctrl_match);
static struct platform_driver rt305x_pinctrl_driver = {
.probe = rt305x_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "rt305x-pinctrl",
.of_match_table = rt305x_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-rt3883.c b/drivers/pinctrl/ralink/pinctrl-rt3883.c
index b2e8151de226..44a66c3d2d2a 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt3883.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt3883.c
@@ -87,7 +87,7 @@ static int rt3883_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id rt3883_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,rt3883-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, rt3883_pinctrl_match);
@@ -95,7 +95,7 @@ MODULE_DEVICE_TABLE(of, rt3883_pinctrl_match);
static struct platform_driver rt3883_pinctrl_driver = {
.probe = rt3883_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "rt3883-pinctrl",
.of_match_table = rt3883_pinctrl_match,
},
};
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 07/14] pinctrl: ralink: add new compatible strings for each pinctrl subdriver
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add new compatible strings for each pinctrl subdriver. Change driver name
on all subdrivers accordingly.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-mt7621.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt2880.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt305x.c | 4 ++--
drivers/pinctrl/ralink/pinctrl-rt3883.c | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7620.c b/drivers/pinctrl/ralink/pinctrl-mt7620.c
index fde269c68a7b..22ff16eff02f 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -371,7 +371,7 @@ static int mt7620_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id mt7620_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,mt7620-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, mt7620_pinctrl_match);
@@ -379,7 +379,7 @@ MODULE_DEVICE_TABLE(of, mt7620_pinctrl_match);
static struct platform_driver mt7620_pinctrl_driver = {
.probe = mt7620_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "mt7620-pinctrl",
.of_match_table = mt7620_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-mt7621.c b/drivers/pinctrl/ralink/pinctrl-mt7621.c
index 1470250ca3b7..b47968f40e0c 100644
--- a/drivers/pinctrl/ralink/pinctrl-mt7621.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7621.c
@@ -96,7 +96,7 @@ static int mt7621_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id mt7621_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,mt7621-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, mt7621_pinctrl_match);
@@ -104,7 +104,7 @@ MODULE_DEVICE_TABLE(of, mt7621_pinctrl_match);
static struct platform_driver mt7621_pinctrl_driver = {
.probe = mt7621_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "mt7621-pinctrl",
.of_match_table = mt7621_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-rt2880.c b/drivers/pinctrl/ralink/pinctrl-rt2880.c
index 9c5e828af43a..811e12df1133 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt2880.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt2880.c
@@ -40,7 +40,7 @@ static int rt2880_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id rt2880_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,rt2880-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, rt2880_pinctrl_match);
@@ -48,7 +48,7 @@ MODULE_DEVICE_TABLE(of, rt2880_pinctrl_match);
static struct platform_driver rt2880_pinctrl_driver = {
.probe = rt2880_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "rt2880-pinctrl",
.of_match_table = rt2880_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-rt305x.c b/drivers/pinctrl/ralink/pinctrl-rt305x.c
index b4765ca27cac..5b204b7ca1f3 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt305x.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt305x.c
@@ -117,7 +117,7 @@ static int rt305x_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id rt305x_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,rt305x-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, rt305x_pinctrl_match);
@@ -125,7 +125,7 @@ MODULE_DEVICE_TABLE(of, rt305x_pinctrl_match);
static struct platform_driver rt305x_pinctrl_driver = {
.probe = rt305x_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "rt305x-pinctrl",
.of_match_table = rt305x_pinctrl_match,
},
};
diff --git a/drivers/pinctrl/ralink/pinctrl-rt3883.c b/drivers/pinctrl/ralink/pinctrl-rt3883.c
index b2e8151de226..44a66c3d2d2a 100644
--- a/drivers/pinctrl/ralink/pinctrl-rt3883.c
+++ b/drivers/pinctrl/ralink/pinctrl-rt3883.c
@@ -87,7 +87,7 @@ static int rt3883_pinctrl_probe(struct platform_device *pdev)
}
static const struct of_device_id rt3883_pinctrl_match[] = {
- { .compatible = "ralink,rt2880-pinmux" },
+ { .compatible = "ralink,rt3883-pinctrl" },
{}
};
MODULE_DEVICE_TABLE(of, rt3883_pinctrl_match);
@@ -95,7 +95,7 @@ MODULE_DEVICE_TABLE(of, rt3883_pinctrl_match);
static struct platform_driver rt3883_pinctrl_driver = {
.probe = rt3883_pinctrl_probe,
.driver = {
- .name = "rt2880-pinmux",
+ .name = "rt3883-pinctrl",
.of_match_table = rt3883_pinctrl_match,
},
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add a new section for the Ralink pinctrl driver and add me and Sergio as
the maintainers.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index fd768d43e048..cbd0c3e180bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/boot/dts/ralink/mt7621*
+RALINK PINCTRL DRIVER
+M: Arınç ÜNAL <arinc.unal@arinc9.com>
+M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+L: linux-mips@vger.kernel.org
+S: Maintained
+F: drivers/pinctrl/ralink/*
+
RALINK RT2X00 WIRELESS LAN DRIVER
M: Stanislaw Gruszka <stf_xl@wp.pl>
M: Helmut Schaa <helmut.schaa@googlemail.com>
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add a new section for the Ralink pinctrl driver and add me and Sergio as
the maintainers.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index fd768d43e048..cbd0c3e180bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/boot/dts/ralink/mt7621*
+RALINK PINCTRL DRIVER
+M: Arınç ÜNAL <arinc.unal@arinc9.com>
+M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+L: linux-mips@vger.kernel.org
+S: Maintained
+F: drivers/pinctrl/ralink/*
+
RALINK RT2X00 WIRELESS LAN DRIVER
M: Stanislaw Gruszka <stf_xl@wp.pl>
M: Helmut Schaa <helmut.schaa@googlemail.com>
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add a new section for the Ralink pinctrl driver and add me and Sergio as
the maintainers.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index fd768d43e048..cbd0c3e180bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
S: Maintained
F: arch/mips/boot/dts/ralink/mt7621*
+RALINK PINCTRL DRIVER
+M: Arınç ÜNAL <arinc.unal@arinc9.com>
+M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+L: linux-mips@vger.kernel.org
+S: Maintained
+F: drivers/pinctrl/ralink/*
+
RALINK RT2X00 WIRELESS LAN DRIVER
M: Stanislaw Gruszka <stf_xl@wp.pl>
M: Helmut Schaa <helmut.schaa@googlemail.com>
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 09/14] mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
pinctrl subdriver on mt7621.dtsi.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 3222684915ac..ee2ec78c8952 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -151,7 +151,7 @@ spi0: spi@b00 {
};
pinctrl: pinctrl {
- compatible = "ralink,rt2880-pinmux";
+ compatible = "ralink,mt7621-pinctrl";
i2c_pins: i2c0-pins {
pinmux {
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 09/14] mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
pinctrl subdriver on mt7621.dtsi.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 3222684915ac..ee2ec78c8952 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -151,7 +151,7 @@ spi0: spi@b00 {
};
pinctrl: pinctrl {
- compatible = "ralink,rt2880-pinmux";
+ compatible = "ralink,mt7621-pinctrl";
i2c_pins: i2c0-pins {
pinmux {
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 09/14] mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
pinctrl subdriver on mt7621.dtsi.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 3222684915ac..ee2ec78c8952 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -151,7 +151,7 @@ spi0: spi@b00 {
};
pinctrl: pinctrl {
- compatible = "ralink,rt2880-pinmux";
+ compatible = "ralink,mt7621-pinctrl";
i2c_pins: i2c0-pins {
pinmux {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
This is the binding for the Ralink RT2880 pinctrl subdriver.
Current pin group and function bindings are for MT7621. Put bindings for
RT2880 instead.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
1 file changed, 12 insertions(+), 12 deletions(-)
rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
similarity index 56%
rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
index 9de8b0c075e2..c657bbf9fdda 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
@@ -1,21 +1,23 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
-$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Ralink rt2880 pinmux controller
+title: Ralink RT2880 Pin Controller
maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
- Sergio Paracuellos <sergio.paracuellos@gmail.com>
description:
- The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
+ Ralink RT2880 pin controller for RT2880 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
is not supported. There is no pinconf support.
properties:
compatible:
- const: ralink,rt2880-pinmux
+ const: ralink,rt2880-pinctrl
patternProperties:
'-pins$':
@@ -28,14 +30,12 @@ patternProperties:
properties:
groups:
- description: Name of the pin group to use for the functions.
- enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
- uart1, uart2, uart3, wdt]
+ description: The pin group to select.
+ enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
function:
- description: The mux function to select
- enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
- pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
- spi, uart1, uart2, uart3, wdt refclk, wdt rst]
+ description: The mux function to select.
+ enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
required:
- groups
@@ -57,7 +57,7 @@ examples:
# Pinmux controller node
- |
pinctrl {
- compatible = "ralink,rt2880-pinmux";
+ compatible = "ralink,rt2880-pinctrl";
i2c_pins: i2c0-pins {
pinmux {
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
This is the binding for the Ralink RT2880 pinctrl subdriver.
Current pin group and function bindings are for MT7621. Put bindings for
RT2880 instead.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
1 file changed, 12 insertions(+), 12 deletions(-)
rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
similarity index 56%
rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
index 9de8b0c075e2..c657bbf9fdda 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
@@ -1,21 +1,23 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
-$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Ralink rt2880 pinmux controller
+title: Ralink RT2880 Pin Controller
maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
- Sergio Paracuellos <sergio.paracuellos@gmail.com>
description:
- The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
+ Ralink RT2880 pin controller for RT2880 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
is not supported. There is no pinconf support.
properties:
compatible:
- const: ralink,rt2880-pinmux
+ const: ralink,rt2880-pinctrl
patternProperties:
'-pins$':
@@ -28,14 +30,12 @@ patternProperties:
properties:
groups:
- description: Name of the pin group to use for the functions.
- enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
- uart1, uart2, uart3, wdt]
+ description: The pin group to select.
+ enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
function:
- description: The mux function to select
- enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
- pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
- spi, uart1, uart2, uart3, wdt refclk, wdt rst]
+ description: The mux function to select.
+ enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
required:
- groups
@@ -57,7 +57,7 @@ examples:
# Pinmux controller node
- |
pinctrl {
- compatible = "ralink,rt2880-pinmux";
+ compatible = "ralink,rt2880-pinctrl";
i2c_pins: i2c0-pins {
pinmux {
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
This is the binding for the Ralink RT2880 pinctrl subdriver.
Current pin group and function bindings are for MT7621. Put bindings for
RT2880 instead.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
1 file changed, 12 insertions(+), 12 deletions(-)
rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
similarity index 56%
rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
index 9de8b0c075e2..c657bbf9fdda 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
@@ -1,21 +1,23 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
-$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Ralink rt2880 pinmux controller
+title: Ralink RT2880 Pin Controller
maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
- Sergio Paracuellos <sergio.paracuellos@gmail.com>
description:
- The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
+ Ralink RT2880 pin controller for RT2880 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
is not supported. There is no pinconf support.
properties:
compatible:
- const: ralink,rt2880-pinmux
+ const: ralink,rt2880-pinctrl
patternProperties:
'-pins$':
@@ -28,14 +30,12 @@ patternProperties:
properties:
groups:
- description: Name of the pin group to use for the functions.
- enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
- uart1, uart2, uart3, wdt]
+ description: The pin group to select.
+ enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
function:
- description: The mux function to select
- enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
- pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
- spi, uart1, uart2, uart3, wdt refclk, wdt rst]
+ description: The mux function to select.
+ enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
required:
- groups
@@ -57,7 +57,7 @@ examples:
# Pinmux controller node
- |
pinctrl {
- compatible = "ralink,rt2880-pinmux";
+ compatible = "ralink,rt2880-pinctrl";
i2c_pins: i2c0-pins {
pinmux {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
MT7688 SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,mt7620-pinctrl.yaml | 87 +++++++++++++++++++
1 file changed, 87 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
new file mode 100644
index 000000000000..01578b8aa277
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7620 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,mt7620-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [
+ # For MT7620 SoC
+ ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
+
+ # For MT7628 and MT7688 SoCs
+ gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
+ p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
+ uart1, uart2, wdt, wled_an, wled_kn,
+ ]
+
+ function:
+ description: The mux function to select.
+ enum: [
+ # For MT7620 SoC
+ ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
+ pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
+ wdt refclk, wdt rst, wled,
+
+ # For MT7628 and MT7688 SoCs
+ antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+ p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
+ pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
+ uart1, uart2, utif, wdt, wled_an, wled_kn, -,
+ ]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,mt7620-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
MT7688 SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,mt7620-pinctrl.yaml | 87 +++++++++++++++++++
1 file changed, 87 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
new file mode 100644
index 000000000000..01578b8aa277
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7620 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,mt7620-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [
+ # For MT7620 SoC
+ ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
+
+ # For MT7628 and MT7688 SoCs
+ gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
+ p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
+ uart1, uart2, wdt, wled_an, wled_kn,
+ ]
+
+ function:
+ description: The mux function to select.
+ enum: [
+ # For MT7620 SoC
+ ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
+ pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
+ wdt refclk, wdt rst, wled,
+
+ # For MT7628 and MT7688 SoCs
+ antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+ p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
+ pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
+ uart1, uart2, utif, wdt, wled_an, wled_kn, -,
+ ]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,mt7620-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
MT7688 SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,mt7620-pinctrl.yaml | 87 +++++++++++++++++++
1 file changed, 87 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
new file mode 100644
index 000000000000..01578b8aa277
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7620 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,mt7620-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [
+ # For MT7620 SoC
+ ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
+
+ # For MT7628 and MT7688 SoCs
+ gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
+ p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
+ uart1, uart2, wdt, wled_an, wled_kn,
+ ]
+
+ function:
+ description: The mux function to select.
+ enum: [
+ # For MT7620 SoC
+ ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
+ pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
+ wdt refclk, wdt rst, wled,
+
+ # For MT7628 and MT7688 SoCs
+ antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+ p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
+ pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
+ uart1, uart2, utif, wdt, wled_an, wled_kn, -,
+ ]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,mt7620-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 12/14] dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink MT7621 pin controller for MT7621 SoC.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,mt7621-pinctrl.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
new file mode 100644
index 000000000000..d1e4d1457754
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7621-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7621 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink MT7621 pin controller for MT7621 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,mt7621-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, uart1, uart2, uart3, wdt]
+
+ function:
+ description: The mux function to select.
+ enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk, pcie rst, pcm, rgmii1, rgmii2,
+ sdhci, spdif2, spdif3, spi, uart1, uart2, uart3, wdt refclk, wdt rst]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,mt7621-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 12/14] dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink MT7621 pin controller for MT7621 SoC.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,mt7621-pinctrl.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
new file mode 100644
index 000000000000..d1e4d1457754
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7621-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7621 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink MT7621 pin controller for MT7621 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,mt7621-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, uart1, uart2, uart3, wdt]
+
+ function:
+ description: The mux function to select.
+ enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk, pcie rst, pcm, rgmii1, rgmii2,
+ sdhci, spdif2, spdif3, spi, uart1, uart2, uart3, wdt refclk, wdt rst]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,mt7621-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 12/14] dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink MT7621 pin controller for MT7621 SoC.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,mt7621-pinctrl.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
new file mode 100644
index 000000000000..d1e4d1457754
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7621-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7621 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink MT7621 pin controller for MT7621 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,mt7621-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, uart1, uart2, uart3, wdt]
+
+ function:
+ description: The mux function to select.
+ enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk, pcie rst, pcm, rgmii1, rgmii2,
+ sdhci, spdif2, spdif3, spi, uart1, uart2, uart3, wdt refclk, wdt rst]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,mt7621-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 13/14] dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink RT305X pin controller for RT3050, RT3052,
RT3350, RT3352 and RT5350 SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,rt305x-pinctrl.yaml | 89 +++++++++++++++++++
1 file changed, 89 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
new file mode 100644
index 000000000000..39f4a153d94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT305X Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink RT305X pin controller for RT3050, RT3052, RT3350, RT3352 and RT5350 SoCs.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt305x-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [
+ # For RT3050, RT3052 and RT3350 SoCs
+ i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite,
+
+ # For RT3352 SoC
+ i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf, uartlite,
+
+ # For RT5350 SoC
+ i2c, jtag, led, spi, spi_cs1, uartf, uartlite,
+ ]
+
+ function:
+ description: The mux function to select.
+ enum: [
+ # For RT3050, RT3052 and RT3350 SoCs
+ gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio, pcm i2s, pcm uartf, rgmii,
+ sdram, spi, uartf, uartlite,
+
+ # For RT3352 SoC
+ gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio, pa, pcm gpio, pcm i2s,
+ pcm uartf, rgmii, spi, spi_cs1, uartf, uartlite, wdg_cs1,
+
+ # For RT5350 SoC
+ gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio, pcm i2s, pcm uartf, spi,
+ spi_cs1, uartf, uartlite, wdg_cs1,
+ ]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,rt305x-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 13/14] dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink RT305X pin controller for RT3050, RT3052,
RT3350, RT3352 and RT5350 SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,rt305x-pinctrl.yaml | 89 +++++++++++++++++++
1 file changed, 89 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
new file mode 100644
index 000000000000..39f4a153d94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT305X Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink RT305X pin controller for RT3050, RT3052, RT3350, RT3352 and RT5350 SoCs.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt305x-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [
+ # For RT3050, RT3052 and RT3350 SoCs
+ i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite,
+
+ # For RT3352 SoC
+ i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf, uartlite,
+
+ # For RT5350 SoC
+ i2c, jtag, led, spi, spi_cs1, uartf, uartlite,
+ ]
+
+ function:
+ description: The mux function to select.
+ enum: [
+ # For RT3050, RT3052 and RT3350 SoCs
+ gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio, pcm i2s, pcm uartf, rgmii,
+ sdram, spi, uartf, uartlite,
+
+ # For RT3352 SoC
+ gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio, pa, pcm gpio, pcm i2s,
+ pcm uartf, rgmii, spi, spi_cs1, uartf, uartlite, wdg_cs1,
+
+ # For RT5350 SoC
+ gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio, pcm i2s, pcm uartf, spi,
+ spi_cs1, uartf, uartlite, wdg_cs1,
+ ]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,rt305x-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 13/14] dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink RT305X pin controller for RT3050, RT3052,
RT3350, RT3352 and RT5350 SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,rt305x-pinctrl.yaml | 89 +++++++++++++++++++
1 file changed, 89 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
new file mode 100644
index 000000000000..39f4a153d94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT305X Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink RT305X pin controller for RT3050, RT3052, RT3350, RT3352 and RT5350 SoCs.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt305x-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [
+ # For RT3050, RT3052 and RT3350 SoCs
+ i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite,
+
+ # For RT3352 SoC
+ i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf, uartlite,
+
+ # For RT5350 SoC
+ i2c, jtag, led, spi, spi_cs1, uartf, uartlite,
+ ]
+
+ function:
+ description: The mux function to select.
+ enum: [
+ # For RT3050, RT3052 and RT3350 SoCs
+ gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio, pcm i2s, pcm uartf, rgmii,
+ sdram, spi, uartf, uartlite,
+
+ # For RT3352 SoC
+ gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio, pa, pcm gpio, pcm i2s,
+ pcm uartf, rgmii, spi, spi_cs1, uartf, uartlite, wdg_cs1,
+
+ # For RT5350 SoC
+ gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio, pcm i2s, pcm uartf, spi,
+ spi_cs1, uartf, uartlite, wdg_cs1,
+ ]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,rt305x-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 14/14] dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:07 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink RT3883 pin controller for RT3883 SoC.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,rt3883-pinctrl.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
new file mode 100644
index 000000000000..583efc0ad51c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt3883-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT3883 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink RT3883 pin controller for RT3883 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt3883-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi, uartf, uartlite]
+
+ function:
+ description: The mux function to select.
+ enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, lna a, lna g, mdio, pci-dev,
+ pci-fnc, pci-host1, pci-host2, pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,rt3883-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 14/14] dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink RT3883 pin controller for RT3883 SoC.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,rt3883-pinctrl.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
new file mode 100644
index 000000000000..583efc0ad51c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt3883-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT3883 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink RT3883 pin controller for RT3883 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt3883-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi, uartf, uartlite]
+
+ function:
+ description: The mux function to select.
+ enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, lna a, lna g, mdio, pci-dev,
+ pci-fnc, pci-host1, pci-host2, pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,rt3883-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 111+ messages in thread
* [PATCH 14/14] dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
@ 2022-04-13 6:07 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 6:07 UTC (permalink / raw)
To: Sergio Paracuellos, Luiz Angelo Daros de Luca, Linus Walleij,
Rob Herring, Krzysztof Kozlowski, Thomas Bogendoerfer,
Matthias Brugger
Cc: erkin.bozoglu, Arınç ÜNAL, linux-gpio, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel, linux-mips
Add binding for the Ralink RT3883 pin controller for RT3883 SoC.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../pinctrl/ralink,rt3883-pinctrl.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
new file mode 100644
index 000000000000..583efc0ad51c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt3883-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT3883 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+ Ralink RT3883 pin controller for RT3883 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+ is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt3883-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description: The pin group to select.
+ enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi, uartf, uartlite]
+
+ function:
+ description: The mux function to select.
+ enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, lna a, lna g, mdio, pci-dev,
+ pci-fnc, pci-host1, pci-host2, pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl {
+ compatible = "ralink,rt3883-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 111+ messages in thread
* Re: [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:27 ` Sergio Paracuellos
-1 siblings, 0 replies; 111+ messages in thread
From: Sergio Paracuellos @ 2022-04-13 6:27 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
> Add a new section for the Ralink pinctrl driver and add me and Sergio as
> the maintainers.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> MAINTAINERS | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fd768d43e048..cbd0c3e180bf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
> S: Maintained
> F: arch/mips/boot/dts/ralink/mt7621*
>
> +RALINK PINCTRL DRIVER
> +M: Arınç ÜNAL <arinc.unal@arinc9.com>
> +M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> +L: linux-mips@vger.kernel.org
> +S: Maintained
> +F: drivers/pinctrl/ralink/*
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Thanks,
Sergio Paracuellos
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
@ 2022-04-13 6:27 ` Sergio Paracuellos
0 siblings, 0 replies; 111+ messages in thread
From: Sergio Paracuellos @ 2022-04-13 6:27 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
> Add a new section for the Ralink pinctrl driver and add me and Sergio as
> the maintainers.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> MAINTAINERS | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fd768d43e048..cbd0c3e180bf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
> S: Maintained
> F: arch/mips/boot/dts/ralink/mt7621*
>
> +RALINK PINCTRL DRIVER
> +M: Arınç ÜNAL <arinc.unal@arinc9.com>
> +M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> +L: linux-mips@vger.kernel.org
> +S: Maintained
> +F: drivers/pinctrl/ralink/*
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Thanks,
Sergio Paracuellos
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
@ 2022-04-13 6:27 ` Sergio Paracuellos
0 siblings, 0 replies; 111+ messages in thread
From: Sergio Paracuellos @ 2022-04-13 6:27 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
> Add a new section for the Ralink pinctrl driver and add me and Sergio as
> the maintainers.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> MAINTAINERS | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fd768d43e048..cbd0c3e180bf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
> S: Maintained
> F: arch/mips/boot/dts/ralink/mt7621*
>
> +RALINK PINCTRL DRIVER
> +M: Arınç ÜNAL <arinc.unal@arinc9.com>
> +M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> +L: linux-mips@vger.kernel.org
> +S: Maintained
> +F: drivers/pinctrl/ralink/*
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Thanks,
Sergio Paracuellos
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 6:36 ` Sergio Paracuellos
-1 siblings, 0 replies; 111+ messages in thread
From: Sergio Paracuellos @ 2022-04-13 6:36 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
Hi Arinç,
On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
> Hey everyone.
>
> This patch series brings complete refactoring to the Ralink pinctrl driver
> and its subdrivers.
>
> The mt7620 pinctrl subdriver supports MT7628 and MT7688 SoCs along with
> MT7620. These two share the same pin layout. The code used for MT7628 and
> MT7688 is renamed from MT7628/mt7628an to MT76X8.
>
> Ralink pinctrl driver is called rt2880 which is the name of the Ralink
> RT2880 SoC. A subdriver for the Ralink RT2880 SoC is called rt288x. Rename
> rt2880 to ralink.
>
> Rename code from pinmux to pinctrl for where the operation is not about the
> muxing of pins.
>
> Rename rt288x pinctrl subdriver for the RT2880 SoC to rt2880.
>
> Variables for functions include "grp" on the Ralink MT7620 and MT7621
> subdrivers. Rename them to "func" instead as they define the functions for
> the pin groups. This is already the case for the other 3 subdrivers;
> RT2880, RT305x, RT3883.
>
> Fix Kconfig to call the subdrivers, well, subdrivers.
>
> Add new compatible strings for each subdriver and update DT binding
> accordingly.
>
> Add Ralink pinctrl driver to MAINTAINERS and add me and Sergio as the
> maintainers.
>
> Finally, fix the current rt2880 documentation and add binding for all of
> the subdrivers.
>
> I have the patches here should anyone prefer to read them there:
> https://github.com/arinc9/linux/commits/ralink-pinctrl-refactor
>
> Ralink pinctrl driver and the subdrivers were compile tested.
> MT7621 pinctrl subdriver was tested on a private mt7621 board.
> YAML bindings checked with:
> ARCH=mips CROSS_COMPILE=mips-linux-gnu- make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/ -j$(nproc)
>
> Arınç ÜNAL (14):
> pinctrl: ralink: rename MT7628(an) functions to MT76X8
> pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
> pinctrl: ralink: rename pinmux functions to pinctrl
> pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
> pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
> pinctrl: ralink: rename driver names to subdrivers
> MAINTAINERS: add Ralink pinctrl driver
For all these rename stuff and MAINTAINERS change:
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> pinctrl: ralink: add new compatible strings for each pinctrl subdriver
> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
> dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
> dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
> dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
> dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
> dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
I think you cannot change compatible strings because you have to be
compatible with previous stuff. That is the reason why when I
refactored all of this stuff from 'arch/mips/ralink' into
'drivers/pinctrl' I maintained the same for all of them and only
created one binding for all. I know that these SoCs are mostly used in
openWRT and the way of doing things there is that when a new version
is released a new dtb is also compiled so I understand the motivation
of the change itself. In any case, Rob has the last word here, not me
:).
Thanks for doing this.
Best regards,
Sergio Paracuellos
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-13 6:36 ` Sergio Paracuellos
0 siblings, 0 replies; 111+ messages in thread
From: Sergio Paracuellos @ 2022-04-13 6:36 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
Hi Arinç,
On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
> Hey everyone.
>
> This patch series brings complete refactoring to the Ralink pinctrl driver
> and its subdrivers.
>
> The mt7620 pinctrl subdriver supports MT7628 and MT7688 SoCs along with
> MT7620. These two share the same pin layout. The code used for MT7628 and
> MT7688 is renamed from MT7628/mt7628an to MT76X8.
>
> Ralink pinctrl driver is called rt2880 which is the name of the Ralink
> RT2880 SoC. A subdriver for the Ralink RT2880 SoC is called rt288x. Rename
> rt2880 to ralink.
>
> Rename code from pinmux to pinctrl for where the operation is not about the
> muxing of pins.
>
> Rename rt288x pinctrl subdriver for the RT2880 SoC to rt2880.
>
> Variables for functions include "grp" on the Ralink MT7620 and MT7621
> subdrivers. Rename them to "func" instead as they define the functions for
> the pin groups. This is already the case for the other 3 subdrivers;
> RT2880, RT305x, RT3883.
>
> Fix Kconfig to call the subdrivers, well, subdrivers.
>
> Add new compatible strings for each subdriver and update DT binding
> accordingly.
>
> Add Ralink pinctrl driver to MAINTAINERS and add me and Sergio as the
> maintainers.
>
> Finally, fix the current rt2880 documentation and add binding for all of
> the subdrivers.
>
> I have the patches here should anyone prefer to read them there:
> https://github.com/arinc9/linux/commits/ralink-pinctrl-refactor
>
> Ralink pinctrl driver and the subdrivers were compile tested.
> MT7621 pinctrl subdriver was tested on a private mt7621 board.
> YAML bindings checked with:
> ARCH=mips CROSS_COMPILE=mips-linux-gnu- make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/ -j$(nproc)
>
> Arınç ÜNAL (14):
> pinctrl: ralink: rename MT7628(an) functions to MT76X8
> pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
> pinctrl: ralink: rename pinmux functions to pinctrl
> pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
> pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
> pinctrl: ralink: rename driver names to subdrivers
> MAINTAINERS: add Ralink pinctrl driver
For all these rename stuff and MAINTAINERS change:
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> pinctrl: ralink: add new compatible strings for each pinctrl subdriver
> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
> dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
> dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
> dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
> dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
> dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
I think you cannot change compatible strings because you have to be
compatible with previous stuff. That is the reason why when I
refactored all of this stuff from 'arch/mips/ralink' into
'drivers/pinctrl' I maintained the same for all of them and only
created one binding for all. I know that these SoCs are mostly used in
openWRT and the way of doing things there is that when a new version
is released a new dtb is also compiled so I understand the motivation
of the change itself. In any case, Rob has the last word here, not me
:).
Thanks for doing this.
Best regards,
Sergio Paracuellos
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-13 6:36 ` Sergio Paracuellos
0 siblings, 0 replies; 111+ messages in thread
From: Sergio Paracuellos @ 2022-04-13 6:36 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
Hi Arinç,
On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
> Hey everyone.
>
> This patch series brings complete refactoring to the Ralink pinctrl driver
> and its subdrivers.
>
> The mt7620 pinctrl subdriver supports MT7628 and MT7688 SoCs along with
> MT7620. These two share the same pin layout. The code used for MT7628 and
> MT7688 is renamed from MT7628/mt7628an to MT76X8.
>
> Ralink pinctrl driver is called rt2880 which is the name of the Ralink
> RT2880 SoC. A subdriver for the Ralink RT2880 SoC is called rt288x. Rename
> rt2880 to ralink.
>
> Rename code from pinmux to pinctrl for where the operation is not about the
> muxing of pins.
>
> Rename rt288x pinctrl subdriver for the RT2880 SoC to rt2880.
>
> Variables for functions include "grp" on the Ralink MT7620 and MT7621
> subdrivers. Rename them to "func" instead as they define the functions for
> the pin groups. This is already the case for the other 3 subdrivers;
> RT2880, RT305x, RT3883.
>
> Fix Kconfig to call the subdrivers, well, subdrivers.
>
> Add new compatible strings for each subdriver and update DT binding
> accordingly.
>
> Add Ralink pinctrl driver to MAINTAINERS and add me and Sergio as the
> maintainers.
>
> Finally, fix the current rt2880 documentation and add binding for all of
> the subdrivers.
>
> I have the patches here should anyone prefer to read them there:
> https://github.com/arinc9/linux/commits/ralink-pinctrl-refactor
>
> Ralink pinctrl driver and the subdrivers were compile tested.
> MT7621 pinctrl subdriver was tested on a private mt7621 board.
> YAML bindings checked with:
> ARCH=mips CROSS_COMPILE=mips-linux-gnu- make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/ -j$(nproc)
>
> Arınç ÜNAL (14):
> pinctrl: ralink: rename MT7628(an) functions to MT76X8
> pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
> pinctrl: ralink: rename pinmux functions to pinctrl
> pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
> pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
> pinctrl: ralink: rename driver names to subdrivers
> MAINTAINERS: add Ralink pinctrl driver
For all these rename stuff and MAINTAINERS change:
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> pinctrl: ralink: add new compatible strings for each pinctrl subdriver
> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
> dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
> dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
> dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
> dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
> dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
I think you cannot change compatible strings because you have to be
compatible with previous stuff. That is the reason why when I
refactored all of this stuff from 'arch/mips/ralink' into
'drivers/pinctrl' I maintained the same for all of them and only
created one binding for all. I know that these SoCs are mostly used in
openWRT and the way of doing things there is that when a new version
is released a new dtb is also compiled so I understand the motivation
of the change itself. In any case, Rob has the last word here, not me
:).
Thanks for doing this.
Best regards,
Sergio Paracuellos
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
2022-04-13 6:36 ` Sergio Paracuellos
(?)
@ 2022-04-13 7:52 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 7:52 UTC (permalink / raw)
To: Sergio Paracuellos
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
Hi Sergio,
On 13/04/2022 09:36, Sergio Paracuellos wrote:
> Hi Arinç,
>
> On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>>
>> Hey everyone.
>>
>> This patch series brings complete refactoring to the Ralink pinctrl driver
>> and its subdrivers.
>>
>> The mt7620 pinctrl subdriver supports MT7628 and MT7688 SoCs along with
>> MT7620. These two share the same pin layout. The code used for MT7628 and
>> MT7688 is renamed from MT7628/mt7628an to MT76X8.
>>
>> Ralink pinctrl driver is called rt2880 which is the name of the Ralink
>> RT2880 SoC. A subdriver for the Ralink RT2880 SoC is called rt288x. Rename
>> rt2880 to ralink.
>>
>> Rename code from pinmux to pinctrl for where the operation is not about the
>> muxing of pins.
>>
>> Rename rt288x pinctrl subdriver for the RT2880 SoC to rt2880.
>>
>> Variables for functions include "grp" on the Ralink MT7620 and MT7621
>> subdrivers. Rename them to "func" instead as they define the functions for
>> the pin groups. This is already the case for the other 3 subdrivers;
>> RT2880, RT305x, RT3883.
>>
>> Fix Kconfig to call the subdrivers, well, subdrivers.
>>
>> Add new compatible strings for each subdriver and update DT binding
>> accordingly.
>>
>> Add Ralink pinctrl driver to MAINTAINERS and add me and Sergio as the
>> maintainers.
>>
>> Finally, fix the current rt2880 documentation and add binding for all of
>> the subdrivers.
>>
>> I have the patches here should anyone prefer to read them there:
>> https://github.com/arinc9/linux/commits/ralink-pinctrl-refactor
>>
>> Ralink pinctrl driver and the subdrivers were compile tested.
>> MT7621 pinctrl subdriver was tested on a private mt7621 board.
>> YAML bindings checked with:
>> ARCH=mips CROSS_COMPILE=mips-linux-gnu- make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/ -j$(nproc)
>>
>> Arınç ÜNAL (14):
>> pinctrl: ralink: rename MT7628(an) functions to MT76X8
>> pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
>> pinctrl: ralink: rename pinmux functions to pinctrl
>> pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
>> pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
>> pinctrl: ralink: rename driver names to subdrivers
>> MAINTAINERS: add Ralink pinctrl driver
>
> For all these rename stuff and MAINTAINERS change:
>
> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
>
>> pinctrl: ralink: add new compatible strings for each pinctrl subdriver
>> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
>> dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
>> dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
>> dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
>> dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
>> dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
>
> I think you cannot change compatible strings because you have to be
> compatible with previous stuff. That is the reason why when I
> refactored all of this stuff from 'arch/mips/ralink' into
> 'drivers/pinctrl' I maintained the same for all of them and only
> created one binding for all. I know that these SoCs are mostly used in
> openWRT and the way of doing things there is that when a new version
> is released a new dtb is also compiled so I understand the motivation
> of the change itself. In any case, Rob has the last word here, not me
> :).
I looked around pinctrl drivers for mediatek. What I see there is that
each subdriver has its own compatible string. There's a documentation
for each subdriver. Each subdriver contains different pin groups and
functions like on ralink. My patch series basically does the same for
Ralink.
I don't see this patch series causing much of an issue for OpenWrt.
They're going to have to update their Ralink DTs with the new compatible
strings when they either switch to the next LTS kernel or decide to
backport Ralink pinctrl changes to the current LTS kernel.
Cheers.
Arınç
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-13 7:52 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 7:52 UTC (permalink / raw)
To: Sergio Paracuellos
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
Hi Sergio,
On 13/04/2022 09:36, Sergio Paracuellos wrote:
> Hi Arinç,
>
> On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>>
>> Hey everyone.
>>
>> This patch series brings complete refactoring to the Ralink pinctrl driver
>> and its subdrivers.
>>
>> The mt7620 pinctrl subdriver supports MT7628 and MT7688 SoCs along with
>> MT7620. These two share the same pin layout. The code used for MT7628 and
>> MT7688 is renamed from MT7628/mt7628an to MT76X8.
>>
>> Ralink pinctrl driver is called rt2880 which is the name of the Ralink
>> RT2880 SoC. A subdriver for the Ralink RT2880 SoC is called rt288x. Rename
>> rt2880 to ralink.
>>
>> Rename code from pinmux to pinctrl for where the operation is not about the
>> muxing of pins.
>>
>> Rename rt288x pinctrl subdriver for the RT2880 SoC to rt2880.
>>
>> Variables for functions include "grp" on the Ralink MT7620 and MT7621
>> subdrivers. Rename them to "func" instead as they define the functions for
>> the pin groups. This is already the case for the other 3 subdrivers;
>> RT2880, RT305x, RT3883.
>>
>> Fix Kconfig to call the subdrivers, well, subdrivers.
>>
>> Add new compatible strings for each subdriver and update DT binding
>> accordingly.
>>
>> Add Ralink pinctrl driver to MAINTAINERS and add me and Sergio as the
>> maintainers.
>>
>> Finally, fix the current rt2880 documentation and add binding for all of
>> the subdrivers.
>>
>> I have the patches here should anyone prefer to read them there:
>> https://github.com/arinc9/linux/commits/ralink-pinctrl-refactor
>>
>> Ralink pinctrl driver and the subdrivers were compile tested.
>> MT7621 pinctrl subdriver was tested on a private mt7621 board.
>> YAML bindings checked with:
>> ARCH=mips CROSS_COMPILE=mips-linux-gnu- make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/ -j$(nproc)
>>
>> Arınç ÜNAL (14):
>> pinctrl: ralink: rename MT7628(an) functions to MT76X8
>> pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
>> pinctrl: ralink: rename pinmux functions to pinctrl
>> pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
>> pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
>> pinctrl: ralink: rename driver names to subdrivers
>> MAINTAINERS: add Ralink pinctrl driver
>
> For all these rename stuff and MAINTAINERS change:
>
> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
>
>> pinctrl: ralink: add new compatible strings for each pinctrl subdriver
>> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
>> dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
>> dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
>> dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
>> dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
>> dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
>
> I think you cannot change compatible strings because you have to be
> compatible with previous stuff. That is the reason why when I
> refactored all of this stuff from 'arch/mips/ralink' into
> 'drivers/pinctrl' I maintained the same for all of them and only
> created one binding for all. I know that these SoCs are mostly used in
> openWRT and the way of doing things there is that when a new version
> is released a new dtb is also compiled so I understand the motivation
> of the change itself. In any case, Rob has the last word here, not me
> :).
I looked around pinctrl drivers for mediatek. What I see there is that
each subdriver has its own compatible string. There's a documentation
for each subdriver. Each subdriver contains different pin groups and
functions like on ralink. My patch series basically does the same for
Ralink.
I don't see this patch series causing much of an issue for OpenWrt.
They're going to have to update their Ralink DTs with the new compatible
strings when they either switch to the next LTS kernel or decide to
backport Ralink pinctrl changes to the current LTS kernel.
Cheers.
Arınç
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-13 7:52 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 7:52 UTC (permalink / raw)
To: Sergio Paracuellos
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
Hi Sergio,
On 13/04/2022 09:36, Sergio Paracuellos wrote:
> Hi Arinç,
>
> On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>>
>> Hey everyone.
>>
>> This patch series brings complete refactoring to the Ralink pinctrl driver
>> and its subdrivers.
>>
>> The mt7620 pinctrl subdriver supports MT7628 and MT7688 SoCs along with
>> MT7620. These two share the same pin layout. The code used for MT7628 and
>> MT7688 is renamed from MT7628/mt7628an to MT76X8.
>>
>> Ralink pinctrl driver is called rt2880 which is the name of the Ralink
>> RT2880 SoC. A subdriver for the Ralink RT2880 SoC is called rt288x. Rename
>> rt2880 to ralink.
>>
>> Rename code from pinmux to pinctrl for where the operation is not about the
>> muxing of pins.
>>
>> Rename rt288x pinctrl subdriver for the RT2880 SoC to rt2880.
>>
>> Variables for functions include "grp" on the Ralink MT7620 and MT7621
>> subdrivers. Rename them to "func" instead as they define the functions for
>> the pin groups. This is already the case for the other 3 subdrivers;
>> RT2880, RT305x, RT3883.
>>
>> Fix Kconfig to call the subdrivers, well, subdrivers.
>>
>> Add new compatible strings for each subdriver and update DT binding
>> accordingly.
>>
>> Add Ralink pinctrl driver to MAINTAINERS and add me and Sergio as the
>> maintainers.
>>
>> Finally, fix the current rt2880 documentation and add binding for all of
>> the subdrivers.
>>
>> I have the patches here should anyone prefer to read them there:
>> https://github.com/arinc9/linux/commits/ralink-pinctrl-refactor
>>
>> Ralink pinctrl driver and the subdrivers were compile tested.
>> MT7621 pinctrl subdriver was tested on a private mt7621 board.
>> YAML bindings checked with:
>> ARCH=mips CROSS_COMPILE=mips-linux-gnu- make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/ -j$(nproc)
>>
>> Arınç ÜNAL (14):
>> pinctrl: ralink: rename MT7628(an) functions to MT76X8
>> pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
>> pinctrl: ralink: rename pinmux functions to pinctrl
>> pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880
>> pinctrl: ralink: rename variable names for functions on MT7620 and MT7621
>> pinctrl: ralink: rename driver names to subdrivers
>> MAINTAINERS: add Ralink pinctrl driver
>
> For all these rename stuff and MAINTAINERS change:
>
> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
>
>> pinctrl: ralink: add new compatible strings for each pinctrl subdriver
>> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
>> dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
>> dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
>> dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl
>> dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl
>> dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl
>
> I think you cannot change compatible strings because you have to be
> compatible with previous stuff. That is the reason why when I
> refactored all of this stuff from 'arch/mips/ralink' into
> 'drivers/pinctrl' I maintained the same for all of them and only
> created one binding for all. I know that these SoCs are mostly used in
> openWRT and the way of doing things there is that when a new version
> is released a new dtb is also compiled so I understand the motivation
> of the change itself. In any case, Rob has the last word here, not me
> :).
I looked around pinctrl drivers for mediatek. What I see there is that
each subdriver has its own compatible string. There's a documentation
for each subdriver. Each subdriver contains different pin groups and
functions like on ralink. My patch series basically does the same for
Ralink.
I don't see this patch series causing much of an issue for OpenWrt.
They're going to have to update their Ralink DTs with the new compatible
strings when they either switch to the next LTS kernel or decide to
backport Ralink pinctrl changes to the current LTS kernel.
Cheers.
Arınç
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 8:29 ` Joe Perches
-1 siblings, 0 replies; 111+ messages in thread
From: Joe Perches @ 2022-04-13 8:29 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On Wed, 2022-04-13 at 09:07 +0300, Arınç ÜNAL wrote:
> Add a new section for the Ralink pinctrl driver and add me and Sergio as
> the maintainers.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
It's unusual for a last name to be completely capitalized.
> diff --git a/MAINTAINERS b/MAINTAINERS
[]
> @@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
> S: Maintained
> F: arch/mips/boot/dts/ralink/mt7621*
>
> +RALINK PINCTRL DRIVER
> +M: Arınç ÜNAL <arinc.unal@arinc9.com>
> +M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> +L: linux-mips@vger.kernel.org
> +S: Maintained
> +F: drivers/pinctrl/ralink/*
Typically this is just the directory.
F: drivers/pinctrl/ralink/
as this covers any file in the directory as well as
any possible subdirectories and files.
Using
F: drivers/pinctrl/ralink/*
excludes any possible subdirectories and files within those
possible subdirectories.
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
@ 2022-04-13 8:29 ` Joe Perches
0 siblings, 0 replies; 111+ messages in thread
From: Joe Perches @ 2022-04-13 8:29 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On Wed, 2022-04-13 at 09:07 +0300, Arınç ÜNAL wrote:
> Add a new section for the Ralink pinctrl driver and add me and Sergio as
> the maintainers.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
It's unusual for a last name to be completely capitalized.
> diff --git a/MAINTAINERS b/MAINTAINERS
[]
> @@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
> S: Maintained
> F: arch/mips/boot/dts/ralink/mt7621*
>
> +RALINK PINCTRL DRIVER
> +M: Arınç ÜNAL <arinc.unal@arinc9.com>
> +M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> +L: linux-mips@vger.kernel.org
> +S: Maintained
> +F: drivers/pinctrl/ralink/*
Typically this is just the directory.
F: drivers/pinctrl/ralink/
as this covers any file in the directory as well as
any possible subdirectories and files.
Using
F: drivers/pinctrl/ralink/*
excludes any possible subdirectories and files within those
possible subdirectories.
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
@ 2022-04-13 8:29 ` Joe Perches
0 siblings, 0 replies; 111+ messages in thread
From: Joe Perches @ 2022-04-13 8:29 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On Wed, 2022-04-13 at 09:07 +0300, Arınç ÜNAL wrote:
> Add a new section for the Ralink pinctrl driver and add me and Sergio as
> the maintainers.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
It's unusual for a last name to be completely capitalized.
> diff --git a/MAINTAINERS b/MAINTAINERS
[]
> @@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
> S: Maintained
> F: arch/mips/boot/dts/ralink/mt7621*
>
> +RALINK PINCTRL DRIVER
> +M: Arınç ÜNAL <arinc.unal@arinc9.com>
> +M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> +L: linux-mips@vger.kernel.org
> +S: Maintained
> +F: drivers/pinctrl/ralink/*
Typically this is just the directory.
F: drivers/pinctrl/ralink/
as this covers any file in the directory as well as
any possible subdirectories and files.
Using
F: drivers/pinctrl/ralink/*
excludes any possible subdirectories and files within those
possible subdirectories.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
2022-04-13 8:29 ` Joe Perches
(?)
@ 2022-04-13 10:40 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 10:40 UTC (permalink / raw)
To: Joe Perches, Sergio Paracuellos, Luiz Angelo Daros de Luca,
Linus Walleij, Rob Herring, Krzysztof Kozlowski,
Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 11:29, Joe Perches wrote:
> On Wed, 2022-04-13 at 09:07 +0300, Arınç ÜNAL wrote:
>> Add a new section for the Ralink pinctrl driver and add me and Sergio as
>> the maintainers.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>
> It's unusual for a last name to be completely capitalized.
I was influenced by a law for official correspondence from where I live.
It sort of stuck with me. Surely that's not a problem?
>
>> diff --git a/MAINTAINERS b/MAINTAINERS
> []
>> @@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
>> S: Maintained
>> F: arch/mips/boot/dts/ralink/mt7621*
>>
>> +RALINK PINCTRL DRIVER
>> +M: Arınç ÜNAL <arinc.unal@arinc9.com>
>> +M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
>> +L: linux-mips@vger.kernel.org
>> +S: Maintained
>> +F: drivers/pinctrl/ralink/*
>
> Typically this is just the directory.
>
> F: drivers/pinctrl/ralink/
>
> as this covers any file in the directory as well as
> any possible subdirectories and files.
>
> Using
>
> F: drivers/pinctrl/ralink/*
>
> excludes any possible subdirectories and files within those
> possible subdirectories.
Thanks! I'll change this if I get more stuff to address. I think this is
too minor of a change for resubmitting the series as there're no
subdirectories on there yet.
Arınç
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
@ 2022-04-13 10:40 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 10:40 UTC (permalink / raw)
To: Joe Perches, Sergio Paracuellos, Luiz Angelo Daros de Luca,
Linus Walleij, Rob Herring, Krzysztof Kozlowski,
Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 11:29, Joe Perches wrote:
> On Wed, 2022-04-13 at 09:07 +0300, Arınç ÜNAL wrote:
>> Add a new section for the Ralink pinctrl driver and add me and Sergio as
>> the maintainers.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>
> It's unusual for a last name to be completely capitalized.
I was influenced by a law for official correspondence from where I live.
It sort of stuck with me. Surely that's not a problem?
>
>> diff --git a/MAINTAINERS b/MAINTAINERS
> []
>> @@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
>> S: Maintained
>> F: arch/mips/boot/dts/ralink/mt7621*
>>
>> +RALINK PINCTRL DRIVER
>> +M: Arınç ÜNAL <arinc.unal@arinc9.com>
>> +M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
>> +L: linux-mips@vger.kernel.org
>> +S: Maintained
>> +F: drivers/pinctrl/ralink/*
>
> Typically this is just the directory.
>
> F: drivers/pinctrl/ralink/
>
> as this covers any file in the directory as well as
> any possible subdirectories and files.
>
> Using
>
> F: drivers/pinctrl/ralink/*
>
> excludes any possible subdirectories and files within those
> possible subdirectories.
Thanks! I'll change this if I get more stuff to address. I think this is
too minor of a change for resubmitting the series as there're no
subdirectories on there yet.
Arınç
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver
@ 2022-04-13 10:40 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-13 10:40 UTC (permalink / raw)
To: Joe Perches, Sergio Paracuellos, Luiz Angelo Daros de Luca,
Linus Walleij, Rob Herring, Krzysztof Kozlowski,
Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 11:29, Joe Perches wrote:
> On Wed, 2022-04-13 at 09:07 +0300, Arınç ÜNAL wrote:
>> Add a new section for the Ralink pinctrl driver and add me and Sergio as
>> the maintainers.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>
> It's unusual for a last name to be completely capitalized.
I was influenced by a law for official correspondence from where I live.
It sort of stuck with me. Surely that's not a problem?
>
>> diff --git a/MAINTAINERS b/MAINTAINERS
> []
>> @@ -16502,6 +16502,13 @@ L: linux-mips@vger.kernel.org
>> S: Maintained
>> F: arch/mips/boot/dts/ralink/mt7621*
>>
>> +RALINK PINCTRL DRIVER
>> +M: Arınç ÜNAL <arinc.unal@arinc9.com>
>> +M: Sergio Paracuellos <sergio.paracuellos@gmail.com>
>> +L: linux-mips@vger.kernel.org
>> +S: Maintained
>> +F: drivers/pinctrl/ralink/*
>
> Typically this is just the directory.
>
> F: drivers/pinctrl/ralink/
>
> as this covers any file in the directory as well as
> any possible subdirectories and files.
>
> Using
>
> F: drivers/pinctrl/ralink/*
>
> excludes any possible subdirectories and files within those
> possible subdirectories.
Thanks! I'll change this if I get more stuff to address. I think this is
too minor of a change for resubmitting the series as there're no
subdirectories on there yet.
Arınç
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 15:25 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:25 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 08:07, Arınç ÜNAL wrote:
> Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
> This is the binding for the Ralink RT2880 pinctrl subdriver.
What I don't see here is why you are doing this. pinmux/pinctrl have the
same meaning, I guess?
>
> Current pin group and function bindings are for MT7621. Put bindings for
> RT2880 instead.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
> 1 file changed, 12 insertions(+), 12 deletions(-)
> rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> similarity index 56%
> rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> index 9de8b0c075e2..c657bbf9fdda 100644
> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> @@ -1,21 +1,23 @@
> # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> %YAML 1.2
> ---
> -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
> +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> -title: Ralink rt2880 pinmux controller
> +title: Ralink RT2880 Pin Controller
>
> maintainers:
> + - Arınç ÜNAL <arinc.unal@arinc9.com>
Mention this in commit msg.
> - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>
> description:
> - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
> + Ralink RT2880 pin controller for RT2880 SoC.
> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
> is not supported. There is no pinconf support.
>
> properties:
> compatible:
> - const: ralink,rt2880-pinmux
> + const: ralink,rt2880-pinctrl
you need to deprecate old property and add a new one.
>
> patternProperties:
> '-pins$':
> @@ -28,14 +30,12 @@ patternProperties:
>
> properties:
> groups:
> - description: Name of the pin group to use for the functions.
> - enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
> - uart1, uart2, uart3, wdt]
> + description: The pin group to select.
> + enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
> +
> function:
> - description: The mux function to select
> - enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
> - pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
> - spi, uart1, uart2, uart3, wdt refclk, wdt rst]
> + description: The mux function to select.
> + enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
>
These were all incorrect for rt2880, I understand?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
@ 2022-04-13 15:25 ` Krzysztof Kozlowski
0 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:25 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 08:07, Arınç ÜNAL wrote:
> Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
> This is the binding for the Ralink RT2880 pinctrl subdriver.
What I don't see here is why you are doing this. pinmux/pinctrl have the
same meaning, I guess?
>
> Current pin group and function bindings are for MT7621. Put bindings for
> RT2880 instead.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
> 1 file changed, 12 insertions(+), 12 deletions(-)
> rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> similarity index 56%
> rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> index 9de8b0c075e2..c657bbf9fdda 100644
> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> @@ -1,21 +1,23 @@
> # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> %YAML 1.2
> ---
> -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
> +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> -title: Ralink rt2880 pinmux controller
> +title: Ralink RT2880 Pin Controller
>
> maintainers:
> + - Arınç ÜNAL <arinc.unal@arinc9.com>
Mention this in commit msg.
> - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>
> description:
> - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
> + Ralink RT2880 pin controller for RT2880 SoC.
> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
> is not supported. There is no pinconf support.
>
> properties:
> compatible:
> - const: ralink,rt2880-pinmux
> + const: ralink,rt2880-pinctrl
you need to deprecate old property and add a new one.
>
> patternProperties:
> '-pins$':
> @@ -28,14 +30,12 @@ patternProperties:
>
> properties:
> groups:
> - description: Name of the pin group to use for the functions.
> - enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
> - uart1, uart2, uart3, wdt]
> + description: The pin group to select.
> + enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
> +
> function:
> - description: The mux function to select
> - enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
> - pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
> - spi, uart1, uart2, uart3, wdt refclk, wdt rst]
> + description: The mux function to select.
> + enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
>
These were all incorrect for rt2880, I understand?
Best regards,
Krzysztof
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
@ 2022-04-13 15:25 ` Krzysztof Kozlowski
0 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:25 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 08:07, Arınç ÜNAL wrote:
> Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
> This is the binding for the Ralink RT2880 pinctrl subdriver.
What I don't see here is why you are doing this. pinmux/pinctrl have the
same meaning, I guess?
>
> Current pin group and function bindings are for MT7621. Put bindings for
> RT2880 instead.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
> 1 file changed, 12 insertions(+), 12 deletions(-)
> rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> similarity index 56%
> rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> index 9de8b0c075e2..c657bbf9fdda 100644
> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> @@ -1,21 +1,23 @@
> # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> %YAML 1.2
> ---
> -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
> +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> -title: Ralink rt2880 pinmux controller
> +title: Ralink RT2880 Pin Controller
>
> maintainers:
> + - Arınç ÜNAL <arinc.unal@arinc9.com>
Mention this in commit msg.
> - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>
> description:
> - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
> + Ralink RT2880 pin controller for RT2880 SoC.
> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
> is not supported. There is no pinconf support.
>
> properties:
> compatible:
> - const: ralink,rt2880-pinmux
> + const: ralink,rt2880-pinctrl
you need to deprecate old property and add a new one.
>
> patternProperties:
> '-pins$':
> @@ -28,14 +30,12 @@ patternProperties:
>
> properties:
> groups:
> - description: Name of the pin group to use for the functions.
> - enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
> - uart1, uart2, uart3, wdt]
> + description: The pin group to select.
> + enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
> +
> function:
> - description: The mux function to select
> - enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
> - pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
> - spi, uart1, uart2, uart3, wdt refclk, wdt rst]
> + description: The mux function to select.
> + enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
>
These were all incorrect for rt2880, I understand?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 09/14] mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 15:27 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:27 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 08:07, Arınç ÜNAL wrote:
> Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
> pinctrl subdriver on mt7621.dtsi.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
> index 3222684915ac..ee2ec78c8952 100644
> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
> @@ -151,7 +151,7 @@ spi0: spi@b00 {
> };
>
> pinctrl: pinctrl {
> - compatible = "ralink,rt2880-pinmux";
> + compatible = "ralink,mt7621-pinctrl";
The change is non-bisectable and causes issues all other users of DT
(other projects, systems etc). This is discouraged in general, so you
should describe it. The commit msg lacks answer to the main question:
Why? You focused only on what you are doing, but why you are doing is
actually more important for such change.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 09/14] mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
@ 2022-04-13 15:27 ` Krzysztof Kozlowski
0 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:27 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 08:07, Arınç ÜNAL wrote:
> Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
> pinctrl subdriver on mt7621.dtsi.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
> index 3222684915ac..ee2ec78c8952 100644
> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
> @@ -151,7 +151,7 @@ spi0: spi@b00 {
> };
>
> pinctrl: pinctrl {
> - compatible = "ralink,rt2880-pinmux";
> + compatible = "ralink,mt7621-pinctrl";
The change is non-bisectable and causes issues all other users of DT
(other projects, systems etc). This is discouraged in general, so you
should describe it. The commit msg lacks answer to the main question:
Why? You focused only on what you are doing, but why you are doing is
actually more important for such change.
Best regards,
Krzysztof
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 09/14] mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
@ 2022-04-13 15:27 ` Krzysztof Kozlowski
0 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:27 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 08:07, Arınç ÜNAL wrote:
> Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
> pinctrl subdriver on mt7621.dtsi.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
> index 3222684915ac..ee2ec78c8952 100644
> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
> @@ -151,7 +151,7 @@ spi0: spi@b00 {
> };
>
> pinctrl: pinctrl {
> - compatible = "ralink,rt2880-pinmux";
> + compatible = "ralink,mt7621-pinctrl";
The change is non-bisectable and causes issues all other users of DT
(other projects, systems etc). This is discouraged in general, so you
should describe it. The commit msg lacks answer to the main question:
Why? You focused only on what you are doing, but why you are doing is
actually more important for such change.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-13 15:37 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:37 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 08:07, Arınç ÜNAL wrote:
> Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
> MT7688 SoCs.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> .../pinctrl/ralink,mt7620-pinctrl.yaml | 87 +++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
> new file mode 100644
> index 000000000000..01578b8aa277
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ralink MT7620 Pin Controller
> +
> +maintainers:
> + - Arınç ÜNAL <arinc.unal@arinc9.com>
> + - Sergio Paracuellos <sergio.paracuellos@gmail.com>
> +
> +description:
> + Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
Run spellcheck on original bindings, don't copy same typos.
> + is not supported. There is no pinconf support.
> +
> +properties:
> + compatible:
> + const: ralink,mt7620-pinctrl
> +
> +patternProperties:
> + '-pins$':
> + type: object
> + patternProperties:
> + '^(.*-)?pinmux$':
Why do you have two levels here? pins->pinmux->actual pin configuration?
Cannot be something like brcm,bcm636x has?
> + type: object
> + description: node for pinctrl.
> + $ref: pinmux-node.yaml#
> +
> + properties:
> + groups:
> + description: The pin group to select.
I wonder where do you configure particular pins because these are
groups... It's a bit confusing to configure "i2c" group into "i2c" -
looks obvious.
> + enum: [
> + # For MT7620 SoC
> + ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
> +
> + # For MT7628 and MT7688 SoCs
> + gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
> + p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
> + uart1, uart2, wdt, wled_an, wled_kn,
> + ]
> +
> + function:
> + description: The mux function to select.
> + enum: [
> + # For MT7620 SoC
> + ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
> + pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
> + wdt refclk, wdt rst, wled,
> +
> + # For MT7628 and MT7688 SoCs
> + antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
> + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
> + pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
> + uart1, uart2, utif, wdt, wled_an, wled_kn, -,
All these lines do not fit in 80-character limit. Linux coding style
still expects this in most of cases.
> + ]
> +
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
@ 2022-04-13 15:37 ` Krzysztof Kozlowski
0 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:37 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 08:07, Arınç ÜNAL wrote:
> Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
> MT7688 SoCs.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> .../pinctrl/ralink,mt7620-pinctrl.yaml | 87 +++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
> new file mode 100644
> index 000000000000..01578b8aa277
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ralink MT7620 Pin Controller
> +
> +maintainers:
> + - Arınç ÜNAL <arinc.unal@arinc9.com>
> + - Sergio Paracuellos <sergio.paracuellos@gmail.com>
> +
> +description:
> + Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
Run spellcheck on original bindings, don't copy same typos.
> + is not supported. There is no pinconf support.
> +
> +properties:
> + compatible:
> + const: ralink,mt7620-pinctrl
> +
> +patternProperties:
> + '-pins$':
> + type: object
> + patternProperties:
> + '^(.*-)?pinmux$':
Why do you have two levels here? pins->pinmux->actual pin configuration?
Cannot be something like brcm,bcm636x has?
> + type: object
> + description: node for pinctrl.
> + $ref: pinmux-node.yaml#
> +
> + properties:
> + groups:
> + description: The pin group to select.
I wonder where do you configure particular pins because these are
groups... It's a bit confusing to configure "i2c" group into "i2c" -
looks obvious.
> + enum: [
> + # For MT7620 SoC
> + ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
> +
> + # For MT7628 and MT7688 SoCs
> + gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
> + p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
> + uart1, uart2, wdt, wled_an, wled_kn,
> + ]
> +
> + function:
> + description: The mux function to select.
> + enum: [
> + # For MT7620 SoC
> + ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
> + pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
> + wdt refclk, wdt rst, wled,
> +
> + # For MT7628 and MT7688 SoCs
> + antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
> + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
> + pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
> + uart1, uart2, utif, wdt, wled_an, wled_kn, -,
All these lines do not fit in 80-character limit. Linux coding style
still expects this in most of cases.
> + ]
> +
Best regards,
Krzysztof
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
@ 2022-04-13 15:37 ` Krzysztof Kozlowski
0 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:37 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 08:07, Arınç ÜNAL wrote:
> Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
> MT7688 SoCs.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> .../pinctrl/ralink,mt7620-pinctrl.yaml | 87 +++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
> new file mode 100644
> index 000000000000..01578b8aa277
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ralink MT7620 Pin Controller
> +
> +maintainers:
> + - Arınç ÜNAL <arinc.unal@arinc9.com>
> + - Sergio Paracuellos <sergio.paracuellos@gmail.com>
> +
> +description:
> + Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
Run spellcheck on original bindings, don't copy same typos.
> + is not supported. There is no pinconf support.
> +
> +properties:
> + compatible:
> + const: ralink,mt7620-pinctrl
> +
> +patternProperties:
> + '-pins$':
> + type: object
> + patternProperties:
> + '^(.*-)?pinmux$':
Why do you have two levels here? pins->pinmux->actual pin configuration?
Cannot be something like brcm,bcm636x has?
> + type: object
> + description: node for pinctrl.
> + $ref: pinmux-node.yaml#
> +
> + properties:
> + groups:
> + description: The pin group to select.
I wonder where do you configure particular pins because these are
groups... It's a bit confusing to configure "i2c" group into "i2c" -
looks obvious.
> + enum: [
> + # For MT7620 SoC
> + ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
> +
> + # For MT7628 and MT7688 SoCs
> + gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
> + p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
> + uart1, uart2, wdt, wled_an, wled_kn,
> + ]
> +
> + function:
> + description: The mux function to select.
> + enum: [
> + # For MT7620 SoC
> + ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
> + pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
> + wdt refclk, wdt rst, wled,
> +
> + # For MT7628 and MT7688 SoCs
> + antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
> + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
> + pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
> + uart1, uart2, utif, wdt, wled_an, wled_kn, -,
All these lines do not fit in 80-character limit. Linux coding style
still expects this in most of cases.
> + ]
> +
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
2022-04-13 6:36 ` Sergio Paracuellos
(?)
@ 2022-04-13 15:39 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:39 UTC (permalink / raw)
To: Sergio Paracuellos, Arınç ÜNAL
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On 13/04/2022 08:36, Sergio Paracuellos wrote:
> I think you cannot change compatible strings because you have to be
> compatible with previous stuff. That is the reason why when I
> refactored all of this stuff from 'arch/mips/ralink' into
> 'drivers/pinctrl' I maintained the same for all of them and only
> created one binding for all. I know that these SoCs are mostly used in
> openWRT and the way of doing things there is that when a new version
> is released a new dtb is also compiled so I understand the motivation
> of the change itself. In any case, Rob has the last word here, not me
> :).
Breaking other users is usually not accepted, so some good reason would
be needed here...
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-13 15:39 ` Krzysztof Kozlowski
0 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:39 UTC (permalink / raw)
To: Sergio Paracuellos, Arınç ÜNAL
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On 13/04/2022 08:36, Sergio Paracuellos wrote:
> I think you cannot change compatible strings because you have to be
> compatible with previous stuff. That is the reason why when I
> refactored all of this stuff from 'arch/mips/ralink' into
> 'drivers/pinctrl' I maintained the same for all of them and only
> created one binding for all. I know that these SoCs are mostly used in
> openWRT and the way of doing things there is that when a new version
> is released a new dtb is also compiled so I understand the motivation
> of the change itself. In any case, Rob has the last word here, not me
> :).
Breaking other users is usually not accepted, so some good reason would
be needed here...
Best regards,
Krzysztof
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-13 15:39 ` Krzysztof Kozlowski
0 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-13 15:39 UTC (permalink / raw)
To: Sergio Paracuellos, Arınç ÜNAL
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On 13/04/2022 08:36, Sergio Paracuellos wrote:
> I think you cannot change compatible strings because you have to be
> compatible with previous stuff. That is the reason why when I
> refactored all of this stuff from 'arch/mips/ralink' into
> 'drivers/pinctrl' I maintained the same for all of them and only
> created one binding for all. I know that these SoCs are mostly used in
> openWRT and the way of doing things there is that when a new version
> is released a new dtb is also compiled so I understand the motivation
> of the change itself. In any case, Rob has the last word here, not me
> :).
Breaking other users is usually not accepted, so some good reason would
be needed here...
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
2022-04-13 15:37 ` Krzysztof Kozlowski
(?)
@ 2022-04-14 1:52 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 1:52 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 18:37, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
>> MT7688 SoCs.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>> .../pinctrl/ralink,mt7620-pinctrl.yaml | 87 +++++++++++++++++++
>> 1 file changed, 87 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..01578b8aa277
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>> @@ -0,0 +1,87 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Ralink MT7620 Pin Controller
>> +
>> +maintainers:
>> + - Arınç ÜNAL <arinc.unal@arinc9.com>
>> + - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>> +
>> +description:
>> + Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
>> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
>
> Run spellcheck on original bindings, don't copy same typos.
Will address, thanks!
>
>> + is not supported. There is no pinconf support.
>> +
>> +properties:
>> + compatible:
>> + const: ralink,mt7620-pinctrl
>> +
>> +patternProperties:
>> + '-pins$':
>> + type: object
>> + patternProperties:
>> + '^(.*-)?pinmux$':
>
> Why do you have two levels here? pins->pinmux->actual pin configuration?
Yes, pins->pinmux->pin-configuration is currently how it's done.
> Cannot be something like brcm,bcm636x has?
Dunno, I'll take a look.
>
>> + type: object
>> + description: node for pinctrl.
>> + $ref: pinmux-node.yaml#
>> +
>> + properties:
>> + groups:
>> + description: The pin group to select.
>
> I wonder where do you configure particular pins because these are
> groups... It's a bit confusing to configure "i2c" group into "i2c" -
> looks obvious.
We don't configure each pin particularly. Ralink driver only supports
muxing certain functions for certain pin groups as hinted on the binding
description.
>
>> + enum: [
>> + # For MT7620 SoC
>> + ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
>> +
>> + # For MT7628 and MT7688 SoCs
>> + gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
>> + p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
>> + uart1, uart2, wdt, wled_an, wled_kn,
>> + ]
>> +
>> + function:
>> + description: The mux function to select.
>> + enum: [
>> + # For MT7620 SoC
>> + ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
>> + pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
>> + wdt refclk, wdt rst, wled,
>> +
>> + # For MT7628 and MT7688 SoCs
>> + antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
>> + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
>> + pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
>> + uart1, uart2, utif, wdt, wled_an, wled_kn, -,
>
> All these lines do not fit in 80-character limit. Linux coding style
> still expects this in most of cases.
Ok, dt_binding_check warns after 110 characters so I made it fit that.
I'll update to 80.
Arınç
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
@ 2022-04-14 1:52 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 1:52 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 18:37, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
>> MT7688 SoCs.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>> .../pinctrl/ralink,mt7620-pinctrl.yaml | 87 +++++++++++++++++++
>> 1 file changed, 87 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..01578b8aa277
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>> @@ -0,0 +1,87 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Ralink MT7620 Pin Controller
>> +
>> +maintainers:
>> + - Arınç ÜNAL <arinc.unal@arinc9.com>
>> + - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>> +
>> +description:
>> + Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
>> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
>
> Run spellcheck on original bindings, don't copy same typos.
Will address, thanks!
>
>> + is not supported. There is no pinconf support.
>> +
>> +properties:
>> + compatible:
>> + const: ralink,mt7620-pinctrl
>> +
>> +patternProperties:
>> + '-pins$':
>> + type: object
>> + patternProperties:
>> + '^(.*-)?pinmux$':
>
> Why do you have two levels here? pins->pinmux->actual pin configuration?
Yes, pins->pinmux->pin-configuration is currently how it's done.
> Cannot be something like brcm,bcm636x has?
Dunno, I'll take a look.
>
>> + type: object
>> + description: node for pinctrl.
>> + $ref: pinmux-node.yaml#
>> +
>> + properties:
>> + groups:
>> + description: The pin group to select.
>
> I wonder where do you configure particular pins because these are
> groups... It's a bit confusing to configure "i2c" group into "i2c" -
> looks obvious.
We don't configure each pin particularly. Ralink driver only supports
muxing certain functions for certain pin groups as hinted on the binding
description.
>
>> + enum: [
>> + # For MT7620 SoC
>> + ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
>> +
>> + # For MT7628 and MT7688 SoCs
>> + gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
>> + p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
>> + uart1, uart2, wdt, wled_an, wled_kn,
>> + ]
>> +
>> + function:
>> + description: The mux function to select.
>> + enum: [
>> + # For MT7620 SoC
>> + ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
>> + pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
>> + wdt refclk, wdt rst, wled,
>> +
>> + # For MT7628 and MT7688 SoCs
>> + antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
>> + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
>> + pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
>> + uart1, uart2, utif, wdt, wled_an, wled_kn, -,
>
> All these lines do not fit in 80-character limit. Linux coding style
> still expects this in most of cases.
Ok, dt_binding_check warns after 110 characters so I made it fit that.
I'll update to 80.
Arınç
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
@ 2022-04-14 1:52 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 1:52 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 18:37, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
>> MT7688 SoCs.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>> .../pinctrl/ralink,mt7620-pinctrl.yaml | 87 +++++++++++++++++++
>> 1 file changed, 87 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..01578b8aa277
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>> @@ -0,0 +1,87 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Ralink MT7620 Pin Controller
>> +
>> +maintainers:
>> + - Arınç ÜNAL <arinc.unal@arinc9.com>
>> + - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>> +
>> +description:
>> + Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
>> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
>
> Run spellcheck on original bindings, don't copy same typos.
Will address, thanks!
>
>> + is not supported. There is no pinconf support.
>> +
>> +properties:
>> + compatible:
>> + const: ralink,mt7620-pinctrl
>> +
>> +patternProperties:
>> + '-pins$':
>> + type: object
>> + patternProperties:
>> + '^(.*-)?pinmux$':
>
> Why do you have two levels here? pins->pinmux->actual pin configuration?
Yes, pins->pinmux->pin-configuration is currently how it's done.
> Cannot be something like brcm,bcm636x has?
Dunno, I'll take a look.
>
>> + type: object
>> + description: node for pinctrl.
>> + $ref: pinmux-node.yaml#
>> +
>> + properties:
>> + groups:
>> + description: The pin group to select.
>
> I wonder where do you configure particular pins because these are
> groups... It's a bit confusing to configure "i2c" group into "i2c" -
> looks obvious.
We don't configure each pin particularly. Ralink driver only supports
muxing certain functions for certain pin groups as hinted on the binding
description.
>
>> + enum: [
>> + # For MT7620 SoC
>> + ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
>> +
>> + # For MT7628 and MT7688 SoCs
>> + gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
>> + p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
>> + uart1, uart2, wdt, wled_an, wled_kn,
>> + ]
>> +
>> + function:
>> + description: The mux function to select.
>> + enum: [
>> + # For MT7620 SoC
>> + ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
>> + pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
>> + wdt refclk, wdt rst, wled,
>> +
>> + # For MT7628 and MT7688 SoCs
>> + antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
>> + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
>> + pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
>> + uart1, uart2, utif, wdt, wled_an, wled_kn, -,
>
> All these lines do not fit in 80-character limit. Linux coding style
> still expects this in most of cases.
Ok, dt_binding_check warns after 110 characters so I made it fit that.
I'll update to 80.
Arınç
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
2022-04-14 1:52 ` Arınç ÜNAL
(?)
@ 2022-04-14 6:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-14 6:33 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 14/04/2022 03:52, Arınç ÜNAL wrote:
>>
>>> + is not supported. There is no pinconf support.
>>> +
>>> +properties:
>>> + compatible:
>>> + const: ralink,mt7620-pinctrl
>>> +
>>> +patternProperties:
>>> + '-pins$':
>>> + type: object
>>> + patternProperties:
>>> + '^(.*-)?pinmux$':
>>
>> Why do you have two levels here? pins->pinmux->actual pin configuration?
>
> Yes, pins->pinmux->pin-configuration is currently how it's done.
It is currently done? Aren't you bringing here new bindings and new
driver support?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
@ 2022-04-14 6:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-14 6:33 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 14/04/2022 03:52, Arınç ÜNAL wrote:
>>
>>> + is not supported. There is no pinconf support.
>>> +
>>> +properties:
>>> + compatible:
>>> + const: ralink,mt7620-pinctrl
>>> +
>>> +patternProperties:
>>> + '-pins$':
>>> + type: object
>>> + patternProperties:
>>> + '^(.*-)?pinmux$':
>>
>> Why do you have two levels here? pins->pinmux->actual pin configuration?
>
> Yes, pins->pinmux->pin-configuration is currently how it's done.
It is currently done? Aren't you bringing here new bindings and new
driver support?
Best regards,
Krzysztof
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
@ 2022-04-14 6:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 111+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-14 6:33 UTC (permalink / raw)
To: Arınç ÜNAL, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 14/04/2022 03:52, Arınç ÜNAL wrote:
>>
>>> + is not supported. There is no pinconf support.
>>> +
>>> +properties:
>>> + compatible:
>>> + const: ralink,mt7620-pinctrl
>>> +
>>> +patternProperties:
>>> + '-pins$':
>>> + type: object
>>> + patternProperties:
>>> + '^(.*-)?pinmux$':
>>
>> Why do you have two levels here? pins->pinmux->actual pin configuration?
>
> Yes, pins->pinmux->pin-configuration is currently how it's done.
It is currently done? Aren't you bringing here new bindings and new
driver support?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
2022-04-14 6:33 ` Krzysztof Kozlowski
(?)
@ 2022-04-14 8:16 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:16 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 14/04/2022 09:33, Krzysztof Kozlowski wrote:
> On 14/04/2022 03:52, Arınç ÜNAL wrote:
>>>
>>>> + is not supported. There is no pinconf support.
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + const: ralink,mt7620-pinctrl
>>>> +
>>>> +patternProperties:
>>>> + '-pins$':
>>>> + type: object
>>>> + patternProperties:
>>>> + '^(.*-)?pinmux$':
>>>
>>> Why do you have two levels here? pins->pinmux->actual pin configuration?
>>
>> Yes, pins->pinmux->pin-configuration is currently how it's done.
>
> It is currently done? Aren't you bringing here new bindings and new
> driver support?
I'm submitting bindings for the existing subdrivers. There's nothing new
but refactoring and submitting the missing bindings.
Cheers.
Arınç
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
@ 2022-04-14 8:16 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:16 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 14/04/2022 09:33, Krzysztof Kozlowski wrote:
> On 14/04/2022 03:52, Arınç ÜNAL wrote:
>>>
>>>> + is not supported. There is no pinconf support.
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + const: ralink,mt7620-pinctrl
>>>> +
>>>> +patternProperties:
>>>> + '-pins$':
>>>> + type: object
>>>> + patternProperties:
>>>> + '^(.*-)?pinmux$':
>>>
>>> Why do you have two levels here? pins->pinmux->actual pin configuration?
>>
>> Yes, pins->pinmux->pin-configuration is currently how it's done.
>
> It is currently done? Aren't you bringing here new bindings and new
> driver support?
I'm submitting bindings for the existing subdrivers. There's nothing new
but refactoring and submitting the missing bindings.
Cheers.
Arınç
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl
@ 2022-04-14 8:16 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:16 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 14/04/2022 09:33, Krzysztof Kozlowski wrote:
> On 14/04/2022 03:52, Arınç ÜNAL wrote:
>>>
>>>> + is not supported. There is no pinconf support.
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + const: ralink,mt7620-pinctrl
>>>> +
>>>> +patternProperties:
>>>> + '-pins$':
>>>> + type: object
>>>> + patternProperties:
>>>> + '^(.*-)?pinmux$':
>>>
>>> Why do you have two levels here? pins->pinmux->actual pin configuration?
>>
>> Yes, pins->pinmux->pin-configuration is currently how it's done.
>
> It is currently done? Aren't you bringing here new bindings and new
> driver support?
I'm submitting bindings for the existing subdrivers. There's nothing new
but refactoring and submitting the missing bindings.
Cheers.
Arınç
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
2022-04-13 15:39 ` Krzysztof Kozlowski
(?)
@ 2022-04-14 8:26 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:26 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On 13/04/2022 18:39, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:36, Sergio Paracuellos wrote:
>> I think you cannot change compatible strings because you have to be
>> compatible with previous stuff. That is the reason why when I
>> refactored all of this stuff from 'arch/mips/ralink' into
>> 'drivers/pinctrl' I maintained the same for all of them and only
>> created one binding for all. I know that these SoCs are mostly used in
>> openWRT and the way of doing things there is that when a new version
>> is released a new dtb is also compiled so I understand the motivation
>> of the change itself. In any case, Rob has the last word here, not me
>> :).
>
> Breaking other users is usually not accepted, so some good reason would
> be needed here...
As I explained on my response to Sergio, this doesn't necessarily break
anything.
>
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-14 8:26 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:26 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On 13/04/2022 18:39, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:36, Sergio Paracuellos wrote:
>> I think you cannot change compatible strings because you have to be
>> compatible with previous stuff. That is the reason why when I
>> refactored all of this stuff from 'arch/mips/ralink' into
>> 'drivers/pinctrl' I maintained the same for all of them and only
>> created one binding for all. I know that these SoCs are mostly used in
>> openWRT and the way of doing things there is that when a new version
>> is released a new dtb is also compiled so I understand the motivation
>> of the change itself. In any case, Rob has the last word here, not me
>> :).
>
> Breaking other users is usually not accepted, so some good reason would
> be needed here...
As I explained on my response to Sergio, this doesn't necessarily break
anything.
>
>
> Best regards,
> Krzysztof
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-14 8:26 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:26 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos
Cc: Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On 13/04/2022 18:39, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:36, Sergio Paracuellos wrote:
>> I think you cannot change compatible strings because you have to be
>> compatible with previous stuff. That is the reason why when I
>> refactored all of this stuff from 'arch/mips/ralink' into
>> 'drivers/pinctrl' I maintained the same for all of them and only
>> created one binding for all. I know that these SoCs are mostly used in
>> openWRT and the way of doing things there is that when a new version
>> is released a new dtb is also compiled so I understand the motivation
>> of the change itself. In any case, Rob has the last word here, not me
>> :).
>
> Breaking other users is usually not accepted, so some good reason would
> be needed here...
As I explained on my response to Sergio, this doesn't necessarily break
anything.
>
>
> Best regards,
> Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
2022-04-13 15:25 ` Krzysztof Kozlowski
(?)
@ 2022-04-14 8:34 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:34 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 18:25, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
>> This is the binding for the Ralink RT2880 pinctrl subdriver.
>
> What I don't see here is why you are doing this. pinmux/pinctrl have the
> same meaning, I guess?
What I understand is pinmux is rather a specific term for the muxing of
pins or pin groups. Pinctrl is what we prefer here since the term is
more inclusive of what the subdriver does: controlling pins. Any
mediatek driver/subdriver is called pinctrl so I'm not doing something
uncommon.
>
>>
>> Current pin group and function bindings are for MT7621. Put bindings for
>> RT2880 instead.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>> ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
>> 1 file changed, 12 insertions(+), 12 deletions(-)
>> rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>> similarity index 56%
>> rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>> rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>> index 9de8b0c075e2..c657bbf9fdda 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>> @@ -1,21 +1,23 @@
>> # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> %YAML 1.2
>> ---
>> -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
>> +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
>> $schema: http://devicetree.org/meta-schemas/core.yaml#
>>
>> -title: Ralink rt2880 pinmux controller
>> +title: Ralink RT2880 Pin Controller
>>
>> maintainers:
>> + - Arınç ÜNAL <arinc.unal@arinc9.com>
>
> Mention this in commit msg.
Will do.
>
>> - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>>
>> description:
>> - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
>> + Ralink RT2880 pin controller for RT2880 SoC.
>> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
>> is not supported. There is no pinconf support.
>>
>> properties:
>> compatible:
>> - const: ralink,rt2880-pinmux
>> + const: ralink,rt2880-pinctrl
>
> you need to deprecate old property and add a new one.
Do we really have to? That property name was inaccurate from the start.
I don't see a reason to keep it being referred to on the binding.
>
>
>>
>> patternProperties:
>> '-pins$':
>> @@ -28,14 +30,12 @@ patternProperties:
>>
>> properties:
>> groups:
>> - description: Name of the pin group to use for the functions.
>> - enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
>> - uart1, uart2, uart3, wdt]
>> + description: The pin group to select.
>> + enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
>> +
>> function:
>> - description: The mux function to select
>> - enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
>> - pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
>> - spi, uart1, uart2, uart3, wdt refclk, wdt rst]
>> + description: The mux function to select.
>> + enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
>>
>
> These were all incorrect for rt2880, I understand?
Pretty much.
Arınç
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
@ 2022-04-14 8:34 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:34 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 18:25, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
>> This is the binding for the Ralink RT2880 pinctrl subdriver.
>
> What I don't see here is why you are doing this. pinmux/pinctrl have the
> same meaning, I guess?
What I understand is pinmux is rather a specific term for the muxing of
pins or pin groups. Pinctrl is what we prefer here since the term is
more inclusive of what the subdriver does: controlling pins. Any
mediatek driver/subdriver is called pinctrl so I'm not doing something
uncommon.
>
>>
>> Current pin group and function bindings are for MT7621. Put bindings for
>> RT2880 instead.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>> ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
>> 1 file changed, 12 insertions(+), 12 deletions(-)
>> rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>> similarity index 56%
>> rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>> rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>> index 9de8b0c075e2..c657bbf9fdda 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>> @@ -1,21 +1,23 @@
>> # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> %YAML 1.2
>> ---
>> -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
>> +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
>> $schema: http://devicetree.org/meta-schemas/core.yaml#
>>
>> -title: Ralink rt2880 pinmux controller
>> +title: Ralink RT2880 Pin Controller
>>
>> maintainers:
>> + - Arınç ÜNAL <arinc.unal@arinc9.com>
>
> Mention this in commit msg.
Will do.
>
>> - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>>
>> description:
>> - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
>> + Ralink RT2880 pin controller for RT2880 SoC.
>> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
>> is not supported. There is no pinconf support.
>>
>> properties:
>> compatible:
>> - const: ralink,rt2880-pinmux
>> + const: ralink,rt2880-pinctrl
>
> you need to deprecate old property and add a new one.
Do we really have to? That property name was inaccurate from the start.
I don't see a reason to keep it being referred to on the binding.
>
>
>>
>> patternProperties:
>> '-pins$':
>> @@ -28,14 +30,12 @@ patternProperties:
>>
>> properties:
>> groups:
>> - description: Name of the pin group to use for the functions.
>> - enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
>> - uart1, uart2, uart3, wdt]
>> + description: The pin group to select.
>> + enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
>> +
>> function:
>> - description: The mux function to select
>> - enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
>> - pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
>> - spi, uart1, uart2, uart3, wdt refclk, wdt rst]
>> + description: The mux function to select.
>> + enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
>>
>
> These were all incorrect for rt2880, I understand?
Pretty much.
Arınç
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
@ 2022-04-14 8:34 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:34 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 18:25, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
>> This is the binding for the Ralink RT2880 pinctrl subdriver.
>
> What I don't see here is why you are doing this. pinmux/pinctrl have the
> same meaning, I guess?
What I understand is pinmux is rather a specific term for the muxing of
pins or pin groups. Pinctrl is what we prefer here since the term is
more inclusive of what the subdriver does: controlling pins. Any
mediatek driver/subdriver is called pinctrl so I'm not doing something
uncommon.
>
>>
>> Current pin group and function bindings are for MT7621. Put bindings for
>> RT2880 instead.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>> ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
>> 1 file changed, 12 insertions(+), 12 deletions(-)
>> rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>> similarity index 56%
>> rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>> rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>> index 9de8b0c075e2..c657bbf9fdda 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>> @@ -1,21 +1,23 @@
>> # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> %YAML 1.2
>> ---
>> -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
>> +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
>> $schema: http://devicetree.org/meta-schemas/core.yaml#
>>
>> -title: Ralink rt2880 pinmux controller
>> +title: Ralink RT2880 Pin Controller
>>
>> maintainers:
>> + - Arınç ÜNAL <arinc.unal@arinc9.com>
>
> Mention this in commit msg.
Will do.
>
>> - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>>
>> description:
>> - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
>> + Ralink RT2880 pin controller for RT2880 SoC.
>> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
>> is not supported. There is no pinconf support.
>>
>> properties:
>> compatible:
>> - const: ralink,rt2880-pinmux
>> + const: ralink,rt2880-pinctrl
>
> you need to deprecate old property and add a new one.
Do we really have to? That property name was inaccurate from the start.
I don't see a reason to keep it being referred to on the binding.
>
>
>>
>> patternProperties:
>> '-pins$':
>> @@ -28,14 +30,12 @@ patternProperties:
>>
>> properties:
>> groups:
>> - description: Name of the pin group to use for the functions.
>> - enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
>> - uart1, uart2, uart3, wdt]
>> + description: The pin group to select.
>> + enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
>> +
>> function:
>> - description: The mux function to select
>> - enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
>> - pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
>> - spi, uart1, uart2, uart3, wdt refclk, wdt rst]
>> + description: The mux function to select.
>> + enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
>>
>
> These were all incorrect for rt2880, I understand?
Pretty much.
Arınç
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 09/14] mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
2022-04-13 15:27 ` Krzysztof Kozlowski
(?)
@ 2022-04-14 8:38 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 18:27, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
>> pinctrl subdriver on mt7621.dtsi.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>> arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
>> index 3222684915ac..ee2ec78c8952 100644
>> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
>> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
>> @@ -151,7 +151,7 @@ spi0: spi@b00 {
>> };
>>
>> pinctrl: pinctrl {
>> - compatible = "ralink,rt2880-pinmux";
>> + compatible = "ralink,mt7621-pinctrl";
>
> The change is non-bisectable and causes issues all other users of DT
> (other projects, systems etc). This is discouraged in general, so you
> should describe it. The commit msg lacks answer to the main question:
> Why? You focused only on what you are doing, but why you are doing is
> actually more important for such change.
As it's seen on any other pinctrl subdriver that calls code from a main
driver, each subdriver needs to have a different compatible string. We
don't want the same compatible string to match a different subdriver's
pinmux data as it's not for our SoC.
I'll add what I typed above to the commit log.
Arınç
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 09/14] mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
@ 2022-04-14 8:38 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 18:27, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
>> pinctrl subdriver on mt7621.dtsi.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>> arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
>> index 3222684915ac..ee2ec78c8952 100644
>> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
>> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
>> @@ -151,7 +151,7 @@ spi0: spi@b00 {
>> };
>>
>> pinctrl: pinctrl {
>> - compatible = "ralink,rt2880-pinmux";
>> + compatible = "ralink,mt7621-pinctrl";
>
> The change is non-bisectable and causes issues all other users of DT
> (other projects, systems etc). This is discouraged in general, so you
> should describe it. The commit msg lacks answer to the main question:
> Why? You focused only on what you are doing, but why you are doing is
> actually more important for such change.
As it's seen on any other pinctrl subdriver that calls code from a main
driver, each subdriver needs to have a different compatible string. We
don't want the same compatible string to match a different subdriver's
pinmux data as it's not for our SoC.
I'll add what I typed above to the commit log.
Arınç
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 09/14] mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
@ 2022-04-14 8:38 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 8:38 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger
Cc: erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 13/04/2022 18:27, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
>> pinctrl subdriver on mt7621.dtsi.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>> arch/mips/boot/dts/ralink/mt7621.dtsi | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
>> index 3222684915ac..ee2ec78c8952 100644
>> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
>> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
>> @@ -151,7 +151,7 @@ spi0: spi@b00 {
>> };
>>
>> pinctrl: pinctrl {
>> - compatible = "ralink,rt2880-pinmux";
>> + compatible = "ralink,mt7621-pinctrl";
>
> The change is non-bisectable and causes issues all other users of DT
> (other projects, systems etc). This is discouraged in general, so you
> should describe it. The commit msg lacks answer to the main question:
> Why? You focused only on what you are doing, but why you are doing is
> actually more important for such change.
As it's seen on any other pinctrl subdriver that calls code from a main
driver, each subdriver needs to have a different compatible string. We
don't want the same compatible string to match a different subdriver's
pinmux data as it's not for our SoC.
I'll add what I typed above to the commit log.
Arınç
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
2022-04-14 8:34 ` Arınç ÜNAL
(?)
@ 2022-04-14 16:17 ` Rob Herring
-1 siblings, 0 replies; 111+ messages in thread
From: Rob Herring @ 2022-04-14 16:17 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Krzysztof Kozlowski,
Thomas Bogendoerfer, Matthias Brugger, erkin.bozoglu, linux-gpio,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
linux-mips
On Thu, Apr 14, 2022 at 11:34:31AM +0300, Arınç ÜNAL wrote:
> On 13/04/2022 18:25, Krzysztof Kozlowski wrote:
> > On 13/04/2022 08:07, Arınç ÜNAL wrote:
> > > Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
> > > This is the binding for the Ralink RT2880 pinctrl subdriver.
> >
> > What I don't see here is why you are doing this. pinmux/pinctrl have the
> > same meaning, I guess?
>
> What I understand is pinmux is rather a specific term for the muxing of pins
> or pin groups. Pinctrl is what we prefer here since the term is more
> inclusive of what the subdriver does: controlling pins. Any mediatek
> driver/subdriver is called pinctrl so I'm not doing something uncommon.
The correct name is really whatever the h/w block is called, not
whatever we've come up with for some class of devices.
>
> >
> > >
> > > Current pin group and function bindings are for MT7621. Put bindings for
> > > RT2880 instead.
> > >
> > > Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> > > ---
> > > ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
> > > 1 file changed, 12 insertions(+), 12 deletions(-)
> > > rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
> > >
> > > diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> > > similarity index 56%
> > > rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> > > rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> > > index 9de8b0c075e2..c657bbf9fdda 100644
> > > --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> > > +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> > > @@ -1,21 +1,23 @@
> > > # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > > %YAML 1.2
> > > ---
> > > -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
> > > +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
> > > $schema: http://devicetree.org/meta-schemas/core.yaml#
> > > -title: Ralink rt2880 pinmux controller
> > > +title: Ralink RT2880 Pin Controller
> > > maintainers:
> > > + - Arınç ÜNAL <arinc.unal@arinc9.com>
> >
> > Mention this in commit msg.
>
> Will do.
>
> >
> > > - Sergio Paracuellos <sergio.paracuellos@gmail.com>
> > > description:
> > > - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
> > > + Ralink RT2880 pin controller for RT2880 SoC.
> > > + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
> > > is not supported. There is no pinconf support.
> > > properties:
> > > compatible:
> > > - const: ralink,rt2880-pinmux
> > > + const: ralink,rt2880-pinctrl
> >
> > you need to deprecate old property and add a new one.
>
> Do we really have to? That property name was inaccurate from the start. I
> don't see a reason to keep it being referred to on the binding.
It's an ABI. There are exceptions, but you've got to spell out the
reasoning in the commit message.
Really, who cares. It's just a unique identifier. Unless you also had a
h/w block called 'pinmux' in addition to a 'pinctrl' block it doesn't
matter. We could use just GUIDs instead.
Rob
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
@ 2022-04-14 16:17 ` Rob Herring
0 siblings, 0 replies; 111+ messages in thread
From: Rob Herring @ 2022-04-14 16:17 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Krzysztof Kozlowski,
Thomas Bogendoerfer, Matthias Brugger, erkin.bozoglu, linux-gpio,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
linux-mips
On Thu, Apr 14, 2022 at 11:34:31AM +0300, Arınç ÜNAL wrote:
> On 13/04/2022 18:25, Krzysztof Kozlowski wrote:
> > On 13/04/2022 08:07, Arınç ÜNAL wrote:
> > > Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
> > > This is the binding for the Ralink RT2880 pinctrl subdriver.
> >
> > What I don't see here is why you are doing this. pinmux/pinctrl have the
> > same meaning, I guess?
>
> What I understand is pinmux is rather a specific term for the muxing of pins
> or pin groups. Pinctrl is what we prefer here since the term is more
> inclusive of what the subdriver does: controlling pins. Any mediatek
> driver/subdriver is called pinctrl so I'm not doing something uncommon.
The correct name is really whatever the h/w block is called, not
whatever we've come up with for some class of devices.
>
> >
> > >
> > > Current pin group and function bindings are for MT7621. Put bindings for
> > > RT2880 instead.
> > >
> > > Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> > > ---
> > > ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
> > > 1 file changed, 12 insertions(+), 12 deletions(-)
> > > rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
> > >
> > > diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> > > similarity index 56%
> > > rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> > > rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> > > index 9de8b0c075e2..c657bbf9fdda 100644
> > > --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> > > +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> > > @@ -1,21 +1,23 @@
> > > # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > > %YAML 1.2
> > > ---
> > > -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
> > > +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
> > > $schema: http://devicetree.org/meta-schemas/core.yaml#
> > > -title: Ralink rt2880 pinmux controller
> > > +title: Ralink RT2880 Pin Controller
> > > maintainers:
> > > + - Arınç ÜNAL <arinc.unal@arinc9.com>
> >
> > Mention this in commit msg.
>
> Will do.
>
> >
> > > - Sergio Paracuellos <sergio.paracuellos@gmail.com>
> > > description:
> > > - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
> > > + Ralink RT2880 pin controller for RT2880 SoC.
> > > + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
> > > is not supported. There is no pinconf support.
> > > properties:
> > > compatible:
> > > - const: ralink,rt2880-pinmux
> > > + const: ralink,rt2880-pinctrl
> >
> > you need to deprecate old property and add a new one.
>
> Do we really have to? That property name was inaccurate from the start. I
> don't see a reason to keep it being referred to on the binding.
It's an ABI. There are exceptions, but you've got to spell out the
reasoning in the commit message.
Really, who cares. It's just a unique identifier. Unless you also had a
h/w block called 'pinmux' in addition to a 'pinctrl' block it doesn't
matter. We could use just GUIDs instead.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
@ 2022-04-14 16:17 ` Rob Herring
0 siblings, 0 replies; 111+ messages in thread
From: Rob Herring @ 2022-04-14 16:17 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Krzysztof Kozlowski,
Thomas Bogendoerfer, Matthias Brugger, erkin.bozoglu, linux-gpio,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
linux-mips
On Thu, Apr 14, 2022 at 11:34:31AM +0300, Arınç ÜNAL wrote:
> On 13/04/2022 18:25, Krzysztof Kozlowski wrote:
> > On 13/04/2022 08:07, Arınç ÜNAL wrote:
> > > Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
> > > This is the binding for the Ralink RT2880 pinctrl subdriver.
> >
> > What I don't see here is why you are doing this. pinmux/pinctrl have the
> > same meaning, I guess?
>
> What I understand is pinmux is rather a specific term for the muxing of pins
> or pin groups. Pinctrl is what we prefer here since the term is more
> inclusive of what the subdriver does: controlling pins. Any mediatek
> driver/subdriver is called pinctrl so I'm not doing something uncommon.
The correct name is really whatever the h/w block is called, not
whatever we've come up with for some class of devices.
>
> >
> > >
> > > Current pin group and function bindings are for MT7621. Put bindings for
> > > RT2880 instead.
> > >
> > > Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> > > ---
> > > ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
> > > 1 file changed, 12 insertions(+), 12 deletions(-)
> > > rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
> > >
> > > diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> > > similarity index 56%
> > > rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> > > rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> > > index 9de8b0c075e2..c657bbf9fdda 100644
> > > --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
> > > +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> > > @@ -1,21 +1,23 @@
> > > # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > > %YAML 1.2
> > > ---
> > > -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
> > > +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
> > > $schema: http://devicetree.org/meta-schemas/core.yaml#
> > > -title: Ralink rt2880 pinmux controller
> > > +title: Ralink RT2880 Pin Controller
> > > maintainers:
> > > + - Arınç ÜNAL <arinc.unal@arinc9.com>
> >
> > Mention this in commit msg.
>
> Will do.
>
> >
> > > - Sergio Paracuellos <sergio.paracuellos@gmail.com>
> > > description:
> > > - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
> > > + Ralink RT2880 pin controller for RT2880 SoC.
> > > + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
> > > is not supported. There is no pinconf support.
> > > properties:
> > > compatible:
> > > - const: ralink,rt2880-pinmux
> > > + const: ralink,rt2880-pinctrl
> >
> > you need to deprecate old property and add a new one.
>
> Do we really have to? That property name was inaccurate from the start. I
> don't see a reason to keep it being referred to on the binding.
It's an ABI. There are exceptions, but you've got to spell out the
reasoning in the commit message.
Really, who cares. It's just a unique identifier. Unless you also had a
h/w block called 'pinmux' in addition to a 'pinctrl' block it doesn't
matter. We could use just GUIDs instead.
Rob
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
2022-04-14 16:17 ` Rob Herring
(?)
@ 2022-04-14 16:37 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 16:37 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Krzysztof Kozlowski,
Thomas Bogendoerfer, Matthias Brugger, erkin.bozoglu, linux-gpio,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
linux-mips
On 14/04/2022 19:17, Rob Herring wrote:
> On Thu, Apr 14, 2022 at 11:34:31AM +0300, Arınç ÜNAL wrote:
>> On 13/04/2022 18:25, Krzysztof Kozlowski wrote:
>>> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>>>> Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
>>>> This is the binding for the Ralink RT2880 pinctrl subdriver.
>>>
>>> What I don't see here is why you are doing this. pinmux/pinctrl have the
>>> same meaning, I guess?
>>
>> What I understand is pinmux is rather a specific term for the muxing of pins
>> or pin groups. Pinctrl is what we prefer here since the term is more
>> inclusive of what the subdriver does: controlling pins. Any mediatek
>> driver/subdriver is called pinctrl so I'm not doing something uncommon.
>
> The correct name is really whatever the h/w block is called, not
> whatever we've come up with for some class of devices.
>
>>
>>>
>>>>
>>>> Current pin group and function bindings are for MT7621. Put bindings for
>>>> RT2880 instead.
>>>>
>>>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>> ---
>>>> ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
>>>> 1 file changed, 12 insertions(+), 12 deletions(-)
>>>> rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>>>> similarity index 56%
>>>> rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>>>> rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>>>> index 9de8b0c075e2..c657bbf9fdda 100644
>>>> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>>>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>>>> @@ -1,21 +1,23 @@
>>>> # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>>>> %YAML 1.2
>>>> ---
>>>> -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
>>>> +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
>>>> $schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> -title: Ralink rt2880 pinmux controller
>>>> +title: Ralink RT2880 Pin Controller
>>>> maintainers:
>>>> + - Arınç ÜNAL <arinc.unal@arinc9.com>
>>>
>>> Mention this in commit msg.
>>
>> Will do.
>>
>>>
>>>> - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>>>> description:
>>>> - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
>>>> + Ralink RT2880 pin controller for RT2880 SoC.
>>>> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
>>>> is not supported. There is no pinconf support.
>>>> properties:
>>>> compatible:
>>>> - const: ralink,rt2880-pinmux
>>>> + const: ralink,rt2880-pinctrl
>>>
>>> you need to deprecate old property and add a new one.
>>
>> Do we really have to? That property name was inaccurate from the start. I
>> don't see a reason to keep it being referred to on the binding.
>
> It's an ABI. There are exceptions, but you've got to spell out the
> reasoning in the commit message.
Oh, I thought by deprecating, I was supposed to keep the old one on the
YAML binding. I'll properly explain the reason in the commit message.
>
> Really, who cares. It's just a unique identifier. Unless you also had a
> h/w block called 'pinmux' in addition to a 'pinctrl' block it doesn't
> matter. We could use just GUIDs instead.
Understood, thanks Rob!
Arınç
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
@ 2022-04-14 16:37 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 16:37 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Krzysztof Kozlowski,
Thomas Bogendoerfer, Matthias Brugger, erkin.bozoglu, linux-gpio,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
linux-mips
On 14/04/2022 19:17, Rob Herring wrote:
> On Thu, Apr 14, 2022 at 11:34:31AM +0300, Arınç ÜNAL wrote:
>> On 13/04/2022 18:25, Krzysztof Kozlowski wrote:
>>> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>>>> Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
>>>> This is the binding for the Ralink RT2880 pinctrl subdriver.
>>>
>>> What I don't see here is why you are doing this. pinmux/pinctrl have the
>>> same meaning, I guess?
>>
>> What I understand is pinmux is rather a specific term for the muxing of pins
>> or pin groups. Pinctrl is what we prefer here since the term is more
>> inclusive of what the subdriver does: controlling pins. Any mediatek
>> driver/subdriver is called pinctrl so I'm not doing something uncommon.
>
> The correct name is really whatever the h/w block is called, not
> whatever we've come up with for some class of devices.
>
>>
>>>
>>>>
>>>> Current pin group and function bindings are for MT7621. Put bindings for
>>>> RT2880 instead.
>>>>
>>>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>> ---
>>>> ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
>>>> 1 file changed, 12 insertions(+), 12 deletions(-)
>>>> rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>>>> similarity index 56%
>>>> rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>>>> rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>>>> index 9de8b0c075e2..c657bbf9fdda 100644
>>>> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>>>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>>>> @@ -1,21 +1,23 @@
>>>> # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>>>> %YAML 1.2
>>>> ---
>>>> -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
>>>> +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
>>>> $schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> -title: Ralink rt2880 pinmux controller
>>>> +title: Ralink RT2880 Pin Controller
>>>> maintainers:
>>>> + - Arınç ÜNAL <arinc.unal@arinc9.com>
>>>
>>> Mention this in commit msg.
>>
>> Will do.
>>
>>>
>>>> - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>>>> description:
>>>> - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
>>>> + Ralink RT2880 pin controller for RT2880 SoC.
>>>> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
>>>> is not supported. There is no pinconf support.
>>>> properties:
>>>> compatible:
>>>> - const: ralink,rt2880-pinmux
>>>> + const: ralink,rt2880-pinctrl
>>>
>>> you need to deprecate old property and add a new one.
>>
>> Do we really have to? That property name was inaccurate from the start. I
>> don't see a reason to keep it being referred to on the binding.
>
> It's an ABI. There are exceptions, but you've got to spell out the
> reasoning in the commit message.
Oh, I thought by deprecating, I was supposed to keep the old one on the
YAML binding. I'll properly explain the reason in the commit message.
>
> Really, who cares. It's just a unique identifier. Unless you also had a
> h/w block called 'pinmux' in addition to a 'pinctrl' block it doesn't
> matter. We could use just GUIDs instead.
Understood, thanks Rob!
Arınç
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions
@ 2022-04-14 16:37 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-14 16:37 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, Sergio Paracuellos,
Luiz Angelo Daros de Luca, Linus Walleij, Krzysztof Kozlowski,
Thomas Bogendoerfer, Matthias Brugger, erkin.bozoglu, linux-gpio,
devicetree, linux-arm-kernel, linux-mediatek, linux-kernel,
linux-mips
On 14/04/2022 19:17, Rob Herring wrote:
> On Thu, Apr 14, 2022 at 11:34:31AM +0300, Arınç ÜNAL wrote:
>> On 13/04/2022 18:25, Krzysztof Kozlowski wrote:
>>> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>>>> Change binding name from ralink,rt2880-pinmux to ralink,rt2880-pinctrl.
>>>> This is the binding for the Ralink RT2880 pinctrl subdriver.
>>>
>>> What I don't see here is why you are doing this. pinmux/pinctrl have the
>>> same meaning, I guess?
>>
>> What I understand is pinmux is rather a specific term for the muxing of pins
>> or pin groups. Pinctrl is what we prefer here since the term is more
>> inclusive of what the subdriver does: controlling pins. Any mediatek
>> driver/subdriver is called pinctrl so I'm not doing something uncommon.
>
> The correct name is really whatever the h/w block is called, not
> whatever we've come up with for some class of devices.
>
>>
>>>
>>>>
>>>> Current pin group and function bindings are for MT7621. Put bindings for
>>>> RT2880 instead.
>>>>
>>>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>> ---
>>>> ...pinmux.yaml => ralink,rt2880-pinctrl.yaml} | 24 +++++++++----------
>>>> 1 file changed, 12 insertions(+), 12 deletions(-)
>>>> rename Documentation/devicetree/bindings/pinctrl/{ralink,rt2880-pinmux.yaml => ralink,rt2880-pinctrl.yaml} (56%)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>>>> similarity index 56%
>>>> rename from Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>>>> rename to Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>>>> index 9de8b0c075e2..c657bbf9fdda 100644
>>>> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
>>>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
>>>> @@ -1,21 +1,23 @@
>>>> # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>>>> %YAML 1.2
>>>> ---
>>>> -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
>>>> +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
>>>> $schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> -title: Ralink rt2880 pinmux controller
>>>> +title: Ralink RT2880 Pin Controller
>>>> maintainers:
>>>> + - Arınç ÜNAL <arinc.unal@arinc9.com>
>>>
>>> Mention this in commit msg.
>>
>> Will do.
>>
>>>
>>>> - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>>>> description:
>>>> - The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
>>>> + Ralink RT2880 pin controller for RT2880 SoC.
>>>> + The pin controller can only set the muxing of pin groups. Muxing indiviual pins
>>>> is not supported. There is no pinconf support.
>>>> properties:
>>>> compatible:
>>>> - const: ralink,rt2880-pinmux
>>>> + const: ralink,rt2880-pinctrl
>>>
>>> you need to deprecate old property and add a new one.
>>
>> Do we really have to? That property name was inaccurate from the start. I
>> don't see a reason to keep it being referred to on the binding.
>
> It's an ABI. There are exceptions, but you've got to spell out the
> reasoning in the commit message.
Oh, I thought by deprecating, I was supposed to keep the old one on the
YAML binding. I'll properly explain the reason in the commit message.
>
> Really, who cares. It's just a unique identifier. Unless you also had a
> h/w block called 'pinmux' in addition to a 'pinctrl' block it doesn't
> matter. We could use just GUIDs instead.
Understood, thanks Rob!
Arınç
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
2022-04-13 6:07 ` Arınç ÜNAL
(?)
@ 2022-04-21 14:27 ` Linus Walleij
-1 siblings, 0 replies; 111+ messages in thread
From: Linus Walleij @ 2022-04-21 14:27 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Sergio Paracuellos, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
> This patch series brings complete refactoring to the Ralink pinctrl driver
> and its subdrivers.
I just merged all the patches, the comments seem minor and any further
fixes can certainly be done on top of this. Anyone interested in ralink
working nicely is likely in the thread and we mostly care about that this
works for OpenWrt, and if it works for them we are happy.
> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
This was a bit scary since we usually take these through the respective
SoC tree, but I just applied it anyway, it makes logical sense in the
series.
I hope it will not lead to conflicts.
Good work with this series!
My personal headache with RT2880 is the Ralink RT2880F mini PCI card
which apparently contains a non-reflashable firmware. It's not
the RT2880:s fault though, I'm just always reminded of this when
working with RT2880 :/
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-21 14:27 ` Linus Walleij
0 siblings, 0 replies; 111+ messages in thread
From: Linus Walleij @ 2022-04-21 14:27 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Sergio Paracuellos, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
> This patch series brings complete refactoring to the Ralink pinctrl driver
> and its subdrivers.
I just merged all the patches, the comments seem minor and any further
fixes can certainly be done on top of this. Anyone interested in ralink
working nicely is likely in the thread and we mostly care about that this
works for OpenWrt, and if it works for them we are happy.
> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
This was a bit scary since we usually take these through the respective
SoC tree, but I just applied it anyway, it makes logical sense in the
series.
I hope it will not lead to conflicts.
Good work with this series!
My personal headache with RT2880 is the Ralink RT2880F mini PCI card
which apparently contains a non-reflashable firmware. It's not
the RT2880:s fault though, I'm just always reminded of this when
working with RT2880 :/
Yours,
Linus Walleij
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-21 14:27 ` Linus Walleij
0 siblings, 0 replies; 111+ messages in thread
From: Linus Walleij @ 2022-04-21 14:27 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Sergio Paracuellos, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
> This patch series brings complete refactoring to the Ralink pinctrl driver
> and its subdrivers.
I just merged all the patches, the comments seem minor and any further
fixes can certainly be done on top of this. Anyone interested in ralink
working nicely is likely in the thread and we mostly care about that this
works for OpenWrt, and if it works for them we are happy.
> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
This was a bit scary since we usually take these through the respective
SoC tree, but I just applied it anyway, it makes logical sense in the
series.
I hope it will not lead to conflicts.
Good work with this series!
My personal headache with RT2880 is the Ralink RT2880F mini PCI card
which apparently contains a non-reflashable firmware. It's not
the RT2880:s fault though, I'm just always reminded of this when
working with RT2880 :/
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
2022-04-21 14:27 ` Linus Walleij
(?)
@ 2022-04-21 14:43 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-21 14:43 UTC (permalink / raw)
To: Linus Walleij
Cc: Sergio Paracuellos, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 21/04/2022 17:27, Linus Walleij wrote:
> On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
>> This patch series brings complete refactoring to the Ralink pinctrl driver
>> and its subdrivers.
>
> I just merged all the patches, the comments seem minor and any further
> fixes can certainly be done on top of this. Anyone interested in ralink
> working nicely is likely in the thread and we mostly care about that this
> works for OpenWrt, and if it works for them we are happy.
>
>> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
>
> This was a bit scary since we usually take these through the respective
> SoC tree, but I just applied it anyway, it makes logical sense in the
> series.
>
> I hope it will not lead to conflicts.
>
> Good work with this series!
Thanks. There is a v2 of this series which has been waiting for a week,
I hope that was the one you applied as you replied under v1 (I'm not
sure which repository you applied this so I can't check myself).
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=632370
Arınç
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-21 14:43 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-21 14:43 UTC (permalink / raw)
To: Linus Walleij
Cc: Sergio Paracuellos, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 21/04/2022 17:27, Linus Walleij wrote:
> On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
>> This patch series brings complete refactoring to the Ralink pinctrl driver
>> and its subdrivers.
>
> I just merged all the patches, the comments seem minor and any further
> fixes can certainly be done on top of this. Anyone interested in ralink
> working nicely is likely in the thread and we mostly care about that this
> works for OpenWrt, and if it works for them we are happy.
>
>> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
>
> This was a bit scary since we usually take these through the respective
> SoC tree, but I just applied it anyway, it makes logical sense in the
> series.
>
> I hope it will not lead to conflicts.
>
> Good work with this series!
Thanks. There is a v2 of this series which has been waiting for a week,
I hope that was the one you applied as you replied under v1 (I'm not
sure which repository you applied this so I can't check myself).
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=632370
Arınç
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-21 14:43 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-21 14:43 UTC (permalink / raw)
To: Linus Walleij
Cc: Sergio Paracuellos, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, linux-gpio, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, linux-mips
On 21/04/2022 17:27, Linus Walleij wrote:
> On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
>> This patch series brings complete refactoring to the Ralink pinctrl driver
>> and its subdrivers.
>
> I just merged all the patches, the comments seem minor and any further
> fixes can certainly be done on top of this. Anyone interested in ralink
> working nicely is likely in the thread and we mostly care about that this
> works for OpenWrt, and if it works for them we are happy.
>
>> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
>
> This was a bit scary since we usually take these through the respective
> SoC tree, but I just applied it anyway, it makes logical sense in the
> series.
>
> I hope it will not lead to conflicts.
>
> Good work with this series!
Thanks. There is a v2 of this series which has been waiting for a week,
I hope that was the one you applied as you replied under v1 (I'm not
sure which repository you applied this so I can't check myself).
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=632370
Arınç
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
2022-04-21 14:43 ` Arınç ÜNAL
(?)
@ 2022-04-22 5:21 ` Sergio Paracuellos
-1 siblings, 0 replies; 111+ messages in thread
From: Sergio Paracuellos @ 2022-04-22 5:21 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Linus Walleij, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
Hi Arinç,
On Thu, Apr 21, 2022 at 4:44 PM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
> On 21/04/2022 17:27, Linus Walleij wrote:
> > On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
> >
> >> This patch series brings complete refactoring to the Ralink pinctrl driver
> >> and its subdrivers.
> >
> > I just merged all the patches, the comments seem minor and any further
> > fixes can certainly be done on top of this. Anyone interested in ralink
> > working nicely is likely in the thread and we mostly care about that this
> > works for OpenWrt, and if it works for them we are happy.
> >
> >> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
> >
> > This was a bit scary since we usually take these through the respective
> > SoC tree, but I just applied it anyway, it makes logical sense in the
> > series.
> >
> > I hope it will not lead to conflicts.
> >
> > Good work with this series!
>
> Thanks. There is a v2 of this series which has been waiting for a week,
> I hope that was the one you applied as you replied under v1 (I'm not
> sure which repository you applied this so I can't check myself).
Linus adds patches through the linux-pinctrl tree as pinctrl maintainer. Check:
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
Best regards,
Sergio Paracuellos
>
> https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=632370
>
> Arınç
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-22 5:21 ` Sergio Paracuellos
0 siblings, 0 replies; 111+ messages in thread
From: Sergio Paracuellos @ 2022-04-22 5:21 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Linus Walleij, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
Hi Arinç,
On Thu, Apr 21, 2022 at 4:44 PM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
> On 21/04/2022 17:27, Linus Walleij wrote:
> > On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
> >
> >> This patch series brings complete refactoring to the Ralink pinctrl driver
> >> and its subdrivers.
> >
> > I just merged all the patches, the comments seem minor and any further
> > fixes can certainly be done on top of this. Anyone interested in ralink
> > working nicely is likely in the thread and we mostly care about that this
> > works for OpenWrt, and if it works for them we are happy.
> >
> >> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
> >
> > This was a bit scary since we usually take these through the respective
> > SoC tree, but I just applied it anyway, it makes logical sense in the
> > series.
> >
> > I hope it will not lead to conflicts.
> >
> > Good work with this series!
>
> Thanks. There is a v2 of this series which has been waiting for a week,
> I hope that was the one you applied as you replied under v1 (I'm not
> sure which repository you applied this so I can't check myself).
Linus adds patches through the linux-pinctrl tree as pinctrl maintainer. Check:
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
Best regards,
Sergio Paracuellos
>
> https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=632370
>
> Arınç
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-22 5:21 ` Sergio Paracuellos
0 siblings, 0 replies; 111+ messages in thread
From: Sergio Paracuellos @ 2022-04-22 5:21 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Linus Walleij, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
Hi Arinç,
On Thu, Apr 21, 2022 at 4:44 PM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>
> On 21/04/2022 17:27, Linus Walleij wrote:
> > On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
> >
> >> This patch series brings complete refactoring to the Ralink pinctrl driver
> >> and its subdrivers.
> >
> > I just merged all the patches, the comments seem minor and any further
> > fixes can certainly be done on top of this. Anyone interested in ralink
> > working nicely is likely in the thread and we mostly care about that this
> > works for OpenWrt, and if it works for them we are happy.
> >
> >> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
> >
> > This was a bit scary since we usually take these through the respective
> > SoC tree, but I just applied it anyway, it makes logical sense in the
> > series.
> >
> > I hope it will not lead to conflicts.
> >
> > Good work with this series!
>
> Thanks. There is a v2 of this series which has been waiting for a week,
> I hope that was the one you applied as you replied under v1 (I'm not
> sure which repository you applied this so I can't check myself).
Linus adds patches through the linux-pinctrl tree as pinctrl maintainer. Check:
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
Best regards,
Sergio Paracuellos
>
> https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=632370
>
> Arınç
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
2022-04-22 5:21 ` Sergio Paracuellos
(?)
@ 2022-04-22 6:13 ` Arınç ÜNAL
-1 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-22 6:13 UTC (permalink / raw)
To: Sergio Paracuellos
Cc: Linus Walleij, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On 22/04/2022 08:21, Sergio Paracuellos wrote:
> Hi Arinç,
>
> On Thu, Apr 21, 2022 at 4:44 PM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>>
>> On 21/04/2022 17:27, Linus Walleij wrote:
>>> On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>>>
>>>> This patch series brings complete refactoring to the Ralink pinctrl driver
>>>> and its subdrivers.
>>>
>>> I just merged all the patches, the comments seem minor and any further
>>> fixes can certainly be done on top of this. Anyone interested in ralink
>>> working nicely is likely in the thread and we mostly care about that this
>>> works for OpenWrt, and if it works for them we are happy.
>>>
>>>> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
>>>
>>> This was a bit scary since we usually take these through the respective
>>> SoC tree, but I just applied it anyway, it makes logical sense in the
>>> series.
>>>
>>> I hope it will not lead to conflicts.
>>>
>>> Good work with this series!
>>
>> Thanks. There is a v2 of this series which has been waiting for a week,
>> I hope that was the one you applied as you replied under v1 (I'm not
>> sure which repository you applied this so I can't check myself).
>
> Linus adds patches through the linux-pinctrl tree as pinctrl maintainer. Check:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
Thanks Sergio. I see v1 was applied, oops. What to do?
Arınç
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-22 6:13 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-22 6:13 UTC (permalink / raw)
To: Sergio Paracuellos
Cc: Linus Walleij, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On 22/04/2022 08:21, Sergio Paracuellos wrote:
> Hi Arinç,
>
> On Thu, Apr 21, 2022 at 4:44 PM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>>
>> On 21/04/2022 17:27, Linus Walleij wrote:
>>> On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>>>
>>>> This patch series brings complete refactoring to the Ralink pinctrl driver
>>>> and its subdrivers.
>>>
>>> I just merged all the patches, the comments seem minor and any further
>>> fixes can certainly be done on top of this. Anyone interested in ralink
>>> working nicely is likely in the thread and we mostly care about that this
>>> works for OpenWrt, and if it works for them we are happy.
>>>
>>>> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
>>>
>>> This was a bit scary since we usually take these through the respective
>>> SoC tree, but I just applied it anyway, it makes logical sense in the
>>> series.
>>>
>>> I hope it will not lead to conflicts.
>>>
>>> Good work with this series!
>>
>> Thanks. There is a v2 of this series which has been waiting for a week,
>> I hope that was the one you applied as you replied under v1 (I'm not
>> sure which repository you applied this so I can't check myself).
>
> Linus adds patches through the linux-pinctrl tree as pinctrl maintainer. Check:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
Thanks Sergio. I see v1 was applied, oops. What to do?
Arınç
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-22 6:13 ` Arınç ÜNAL
0 siblings, 0 replies; 111+ messages in thread
From: Arınç ÜNAL @ 2022-04-22 6:13 UTC (permalink / raw)
To: Sergio Paracuellos
Cc: Linus Walleij, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On 22/04/2022 08:21, Sergio Paracuellos wrote:
> Hi Arinç,
>
> On Thu, Apr 21, 2022 at 4:44 PM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>>
>> On 21/04/2022 17:27, Linus Walleij wrote:
>>> On Wed, Apr 13, 2022 at 8:08 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>>>
>>>> This patch series brings complete refactoring to the Ralink pinctrl driver
>>>> and its subdrivers.
>>>
>>> I just merged all the patches, the comments seem minor and any further
>>> fixes can certainly be done on top of this. Anyone interested in ralink
>>> working nicely is likely in the thread and we mostly care about that this
>>> works for OpenWrt, and if it works for them we are happy.
>>>
>>>> mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl
>>>
>>> This was a bit scary since we usually take these through the respective
>>> SoC tree, but I just applied it anyway, it makes logical sense in the
>>> series.
>>>
>>> I hope it will not lead to conflicts.
>>>
>>> Good work with this series!
>>
>> Thanks. There is a v2 of this series which has been waiting for a week,
>> I hope that was the one you applied as you replied under v1 (I'm not
>> sure which repository you applied this so I can't check myself).
>
> Linus adds patches through the linux-pinctrl tree as pinctrl maintainer. Check:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
Thanks Sergio. I see v1 was applied, oops. What to do?
Arınç
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
2022-04-22 6:13 ` Arınç ÜNAL
(?)
@ 2022-04-22 22:07 ` Linus Walleij
-1 siblings, 0 replies; 111+ messages in thread
From: Linus Walleij @ 2022-04-22 22:07 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Sergio Paracuellos, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On Fri, Apr 22, 2022 at 8:14 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
> >> Thanks. There is a v2 of this series which has been waiting for a week,
> >> I hope that was the one you applied as you replied under v1 (I'm not
> >> sure which repository you applied this so I can't check myself).
> >
> > Linus adds patches through the linux-pinctrl tree as pinctrl maintainer. Check:
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
>
> Thanks Sergio. I see v1 was applied, oops. What to do?
No problem, I backed it out (had to back out some stuff pulled on top too...)
then re-pulled the stuff I pulled on top, then applied v2 on top.
Let's see how much I screwed up :D
Yours,
Linus Walleij
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-22 22:07 ` Linus Walleij
0 siblings, 0 replies; 111+ messages in thread
From: Linus Walleij @ 2022-04-22 22:07 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Sergio Paracuellos, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On Fri, Apr 22, 2022 at 8:14 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
> >> Thanks. There is a v2 of this series which has been waiting for a week,
> >> I hope that was the one you applied as you replied under v1 (I'm not
> >> sure which repository you applied this so I can't check myself).
> >
> > Linus adds patches through the linux-pinctrl tree as pinctrl maintainer. Check:
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
>
> Thanks Sergio. I see v1 was applied, oops. What to do?
No problem, I backed it out (had to back out some stuff pulled on top too...)
then re-pulled the stuff I pulled on top, then applied v2 on top.
Let's see how much I screwed up :D
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 111+ messages in thread
* Re: [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation
@ 2022-04-22 22:07 ` Linus Walleij
0 siblings, 0 replies; 111+ messages in thread
From: Linus Walleij @ 2022-04-22 22:07 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: Sergio Paracuellos, Luiz Angelo Daros de Luca, Rob Herring,
Krzysztof Kozlowski, Thomas Bogendoerfer, Matthias Brugger,
erkin.bozoglu, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-kernel, moderated list:ARM/Mediatek SoC support,
linux-kernel, open list:MIPS
On Fri, Apr 22, 2022 at 8:14 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
> >> Thanks. There is a v2 of this series which has been waiting for a week,
> >> I hope that was the one you applied as you replied under v1 (I'm not
> >> sure which repository you applied this so I can't check myself).
> >
> > Linus adds patches through the linux-pinctrl tree as pinctrl maintainer. Check:
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
>
> Thanks Sergio. I see v1 was applied, oops. What to do?
No problem, I backed it out (had to back out some stuff pulled on top too...)
then re-pulled the stuff I pulled on top, then applied v2 on top.
Let's see how much I screwed up :D
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 111+ messages in thread
end of thread, other threads:[~2022-04-22 22:46 UTC | newest]
Thread overview: 111+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-13 6:07 [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 01/14] pinctrl: ralink: rename MT7628(an) functions to MT76X8 Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 02/14] pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 03/14] pinctrl: ralink: rename pinmux functions to pinctrl Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 04/14] pinctrl: ralink: rename pinctrl-rt288x to pinctrl-rt2880 Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 05/14] pinctrl: ralink: rename variable names for functions on MT7620 and MT7621 Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 06/14] pinctrl: ralink: rename driver names to subdrivers Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 07/14] pinctrl: ralink: add new compatible strings for each pinctrl subdriver Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 08/14] MAINTAINERS: add Ralink pinctrl driver Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:27 ` Sergio Paracuellos
2022-04-13 6:27 ` Sergio Paracuellos
2022-04-13 6:27 ` Sergio Paracuellos
2022-04-13 8:29 ` Joe Perches
2022-04-13 8:29 ` Joe Perches
2022-04-13 8:29 ` Joe Perches
2022-04-13 10:40 ` Arınç ÜNAL
2022-04-13 10:40 ` Arınç ÜNAL
2022-04-13 10:40 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 09/14] mips: dts: ralink: mt7621: use the new compatible string for MT7621 pinctrl Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 15:27 ` Krzysztof Kozlowski
2022-04-13 15:27 ` Krzysztof Kozlowski
2022-04-13 15:27 ` Krzysztof Kozlowski
2022-04-14 8:38 ` Arınç ÜNAL
2022-04-14 8:38 ` Arınç ÜNAL
2022-04-14 8:38 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 10/14] dt-bindings: pinctrl: rt2880: fix binding name, pin groups and functions Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 15:25 ` Krzysztof Kozlowski
2022-04-13 15:25 ` Krzysztof Kozlowski
2022-04-13 15:25 ` Krzysztof Kozlowski
2022-04-14 8:34 ` Arınç ÜNAL
2022-04-14 8:34 ` Arınç ÜNAL
2022-04-14 8:34 ` Arınç ÜNAL
2022-04-14 16:17 ` Rob Herring
2022-04-14 16:17 ` Rob Herring
2022-04-14 16:17 ` Rob Herring
2022-04-14 16:37 ` Arınç ÜNAL
2022-04-14 16:37 ` Arınç ÜNAL
2022-04-14 16:37 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 15:37 ` Krzysztof Kozlowski
2022-04-13 15:37 ` Krzysztof Kozlowski
2022-04-13 15:37 ` Krzysztof Kozlowski
2022-04-14 1:52 ` Arınç ÜNAL
2022-04-14 1:52 ` Arınç ÜNAL
2022-04-14 1:52 ` Arınç ÜNAL
2022-04-14 6:33 ` Krzysztof Kozlowski
2022-04-14 6:33 ` Krzysztof Kozlowski
2022-04-14 6:33 ` Krzysztof Kozlowski
2022-04-14 8:16 ` Arınç ÜNAL
2022-04-14 8:16 ` Arınç ÜNAL
2022-04-14 8:16 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 12/14] dt-bindings: pinctrl: add binding for Ralink MT7621 pinctrl Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 13/14] dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` [PATCH 14/14] dt-bindings: pinctrl: add binding for Ralink RT3883 pinctrl Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:07 ` Arınç ÜNAL
2022-04-13 6:36 ` [PATCH 0/14] Refactor Ralink Pinctrl and Add Documentation Sergio Paracuellos
2022-04-13 6:36 ` Sergio Paracuellos
2022-04-13 6:36 ` Sergio Paracuellos
2022-04-13 7:52 ` Arınç ÜNAL
2022-04-13 7:52 ` Arınç ÜNAL
2022-04-13 7:52 ` Arınç ÜNAL
2022-04-13 15:39 ` Krzysztof Kozlowski
2022-04-13 15:39 ` Krzysztof Kozlowski
2022-04-13 15:39 ` Krzysztof Kozlowski
2022-04-14 8:26 ` Arınç ÜNAL
2022-04-14 8:26 ` Arınç ÜNAL
2022-04-14 8:26 ` Arınç ÜNAL
2022-04-21 14:27 ` Linus Walleij
2022-04-21 14:27 ` Linus Walleij
2022-04-21 14:27 ` Linus Walleij
2022-04-21 14:43 ` Arınç ÜNAL
2022-04-21 14:43 ` Arınç ÜNAL
2022-04-21 14:43 ` Arınç ÜNAL
2022-04-22 5:21 ` Sergio Paracuellos
2022-04-22 5:21 ` Sergio Paracuellos
2022-04-22 5:21 ` Sergio Paracuellos
2022-04-22 6:13 ` Arınç ÜNAL
2022-04-22 6:13 ` Arınç ÜNAL
2022-04-22 6:13 ` Arınç ÜNAL
2022-04-22 22:07 ` Linus Walleij
2022-04-22 22:07 ` Linus Walleij
2022-04-22 22:07 ` Linus Walleij
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.