* [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig
@ 2017-03-01 8:30 Arnout Vandecappelle
2017-03-01 8:30 ` [Buildroot] [PATCH 2/5] board/minnowboard: remove support for minnowboard Arnout Vandecappelle
` (4 more replies)
0 siblings, 5 replies; 13+ messages in thread
From: Arnout Vandecappelle @ 2017-03-01 8:30 UTC (permalink / raw)
To: buildroot
This defconfig has been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. Remove it, as well as the files it
references. Update the readme to remove references to MinnowBoard.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
board/minnowboard/grub-minnowboard.cfg | 6 --
board/minnowboard/linux-3.8.config | 172 ---------------------------------
board/minnowboard/readme.txt | 10 +-
configs/minnowboard_defconfig | 32 ------
4 files changed, 3 insertions(+), 217 deletions(-)
delete mode 100644 board/minnowboard/grub-minnowboard.cfg
delete mode 100644 board/minnowboard/linux-3.8.config
delete mode 100644 configs/minnowboard_defconfig
diff --git a/board/minnowboard/grub-minnowboard.cfg b/board/minnowboard/grub-minnowboard.cfg
deleted file mode 100644
index 33a0f4aa8d..0000000000
--- a/board/minnowboard/grub-minnowboard.cfg
+++ /dev/null
@@ -1,6 +0,0 @@
-set default="0"
-set timeout="5"
-
-menuentry "Buildroot" {
- linux /bzImage root=/dev/mmcblk0p2 rootwait console=ttyPCH0,115200
-}
diff --git a/board/minnowboard/linux-3.8.config b/board/minnowboard/linux-3.8.config
deleted file mode 100644
index 460aa2d0da..0000000000
--- a/board/minnowboard/linux-3.8.config
+++ /dev/null
@@ -1,172 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_RCU_FANOUT=32
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_SMP=y
-CONFIG_MATOM=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT=y
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_CHECK_BIOS_CORRUPTION=y
-# CONFIG_MTRR_SANITIZER is not set
-CONFIG_EFI=y
-CONFIG_EFI_STUB=y
-CONFIG_HZ_1000=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_ADVANCED_DEBUG=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_X86_ACPI_CPUFREQ=y
-CONFIG_INTEL_IDLE=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_MSI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_SUB_POLICY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_PCH_PHUB=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=m
-CONFIG_PCH_GBE=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO_POLLED=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_PCH_UART=y
-CONFIG_SERIAL_PCH_UART_CONSOLE=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
-CONFIG_HPET=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_EG20T=m
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_TOPCLIFF_PCH=m
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIOLIB=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_SCH=y
-CONFIG_GPIO_PCH=y
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_AGP=m
-CONFIG_DRM=m
-CONFIG_FB=y
-CONFIG_FB_EFI=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_HDA_INTEL=m
-CONFIG_USB=y
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=m
-CONFIG_USB_EG20T=m
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_DMADEVICES=y
-CONFIG_PCH_DMA=y
-CONFIG_MINNOWBOARD=y
-CONFIG_MINNOWBOARD_GPIO=m
-CONFIG_MINNOWBOARD_KEYS=m
-CONFIG_EFI_VARS=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FANOTIFY=y
-CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
-CONFIG_ISO9660_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_FRAME_WARN=1024
-CONFIG_TIMER_STATS=y
-CONFIG_LATENCYTOP=y
-CONFIG_BLK_DEV_IO_TRACE=y
diff --git a/board/minnowboard/readme.txt b/board/minnowboard/readme.txt
index f76cd77c34..fdbb81e3aa 100644
--- a/board/minnowboard/readme.txt
+++ b/board/minnowboard/readme.txt
@@ -1,14 +1,10 @@
-How to get started with the MinnowBoard (MAX)
-=============================================
+How to get started with the MinnowBoard MAX
+===========================================
1. Build
Apply the defconfig:
- $ make minnowboard_defconfig
-
- Or, for the Minnowboard MAX board:
-
$ make minnowboard_max_defconfig
Add any additional packages required and build:
@@ -18,7 +14,7 @@ How to get started with the MinnowBoard (MAX)
2. Write the SD card
The build process will create a SD card image in output/images.
- Write the image to an mSD card, insert into the MinnowBoard
+ Write the image to an mSD card, insert into the MinnowBoard MAX
and power the board on.
$ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync
diff --git a/configs/minnowboard_defconfig b/configs/minnowboard_defconfig
deleted file mode 100644
index f4afc86bf8..0000000000
--- a/configs/minnowboard_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-# Architecture
-BR2_x86_64=y
-BR2_x86_atom=y
-
-# Misc
-BR2_TARGET_GENERIC_GETTY_PORT="ttyPCH0"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/minnowboard/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/minnowboard/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="minnowboard"
-
-# Linux headers same as kernel, a 3.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_8=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Linux kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.yoctoproject.org/linux-yocto-3.8"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ba1587b9b62c801d161897303aa6d22809485f9b"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/minnowboard/linux-3.8.config"
-
-# Bootloader
-BR2_TARGET_GRUB2=y
-BR2_TARGET_GRUB2_I386_EFI=y
-
-# Filesystem image
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 2/5] board/minnowboard: remove support for minnowboard
2017-03-01 8:30 [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig Arnout Vandecappelle
@ 2017-03-01 8:30 ` Arnout Vandecappelle
2017-03-05 20:57 ` Thomas Petazzoni
2017-03-01 8:30 ` [Buildroot] [PATCH 3/5] telit_evk_pro3_defconfig: remove broken defconfig Arnout Vandecappelle
` (3 subsequent siblings)
4 siblings, 1 reply; 13+ messages in thread
From: Arnout Vandecappelle @ 2017-03-01 8:30 UTC (permalink / raw)
To: buildroot
The scripts used for the minnowboards were generic for MinnowBoard and
MinnowBoard MAX. Since we removed the original MinnowBoard, this isn't
necessary anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
Separate commit because we may not want to do this: it doesn't hurt to
have this generic mechanism, and if later someone wants to re-add
MinnowBoard or add support for a new generation of the board, it's
convenient to still have it around.
---
board/minnowboard/{grub-minnowboard-max.cfg => grub.cfg} | 0
board/minnowboard/post-build.sh | 4 +---
configs/minnowboard_max-graphical_defconfig | 1 -
configs/minnowboard_max_defconfig | 1 -
4 files changed, 1 insertion(+), 5 deletions(-)
rename board/minnowboard/{grub-minnowboard-max.cfg => grub.cfg} (100%)
diff --git a/board/minnowboard/grub-minnowboard-max.cfg b/board/minnowboard/grub.cfg
similarity index 100%
rename from board/minnowboard/grub-minnowboard-max.cfg
rename to board/minnowboard/grub.cfg
diff --git a/board/minnowboard/post-build.sh b/board/minnowboard/post-build.sh
index 45f7b527f3..24b8c0539e 100755
--- a/board/minnowboard/post-build.sh
+++ b/board/minnowboard/post-build.sh
@@ -1,8 +1,6 @@
#!/bin/sh
-# args from BR2_ROOTFS_POST_SCRIPT_ARGS
-# $2 board name
-cp -v board/minnowboard/grub-${2}.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
+cp -v board/minnowboard/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
# Add a console on tty1
if [ -e ${TARGET_DIR}/etc/inittab ]; then
diff --git a/configs/minnowboard_max-graphical_defconfig b/configs/minnowboard_max-graphical_defconfig
index 1b95d8e5a1..ac363361ed 100644
--- a/configs/minnowboard_max-graphical_defconfig
+++ b/configs/minnowboard_max-graphical_defconfig
@@ -12,7 +12,6 @@ BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_ROOTFS_OVERLAY="board/minnowboard/fs-overlay-graphical"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/minnowboard/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/minnowboard/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="minnowboard-max"
# Host packages
BR2_PACKAGE_HOST_DOSFSTOOLS=y
diff --git a/configs/minnowboard_max_defconfig b/configs/minnowboard_max_defconfig
index 63190eaa48..fe43b5287c 100644
--- a/configs/minnowboard_max_defconfig
+++ b/configs/minnowboard_max_defconfig
@@ -6,7 +6,6 @@ BR2_x86_atom=y
BR2_SYSTEM_DHCP="eth0"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/minnowboard/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/minnowboard/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="minnowboard-max"
# Linux headers same as kernel, a 4.8 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 3/5] telit_evk_pro3_defconfig: remove broken defconfig
2017-03-01 8:30 [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig Arnout Vandecappelle
2017-03-01 8:30 ` [Buildroot] [PATCH 2/5] board/minnowboard: remove support for minnowboard Arnout Vandecappelle
@ 2017-03-01 8:30 ` Arnout Vandecappelle
2017-03-01 16:28 ` Fabio Porcedda
2017-03-01 8:30 ` [Buildroot] [PATCH 4/5] via_imx6_vab820_defconfig: " Arnout Vandecappelle
` (2 subsequent siblings)
4 siblings, 1 reply; 13+ messages in thread
From: Arnout Vandecappelle @ 2017-03-01 8:30 UTC (permalink / raw)
To: buildroot
This defconfig has been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. Remove it, as well as it board
directory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
---
...04.0-0001-watchdog-add-keep-alive-support.patch | 88 --------
...02-watchdog-add-at91sam9-watchdog-support.patch | 228 ---------------------
...0003-at91sam9260-9g20-add-wathdog-support.patch | 40 ----
...0004-at91sam9260-9g20-fix-wathdog-support.patch | 26 ---
...13.04.0-0005-watchdog-enable-for-evk-pro3.patch | 26 ---
board/telit/evk-pro3/linux-3.9.config | 201 ------------------
board/telit/evk-pro3/readme.txt | 28 ---
configs/telit_evk_pro3_defconfig | 29 ---
8 files changed, 666 deletions(-)
delete mode 100644 board/telit/evk-pro3/barebox-2013.04.0-0001-watchdog-add-keep-alive-support.patch
delete mode 100644 board/telit/evk-pro3/barebox-2013.04.0-0002-watchdog-add-at91sam9-watchdog-support.patch
delete mode 100644 board/telit/evk-pro3/barebox-2013.04.0-0003-at91sam9260-9g20-add-wathdog-support.patch
delete mode 100644 board/telit/evk-pro3/barebox-2013.04.0-0004-at91sam9260-9g20-fix-wathdog-support.patch
delete mode 100644 board/telit/evk-pro3/barebox-2013.04.0-0005-watchdog-enable-for-evk-pro3.patch
delete mode 100644 board/telit/evk-pro3/linux-3.9.config
delete mode 100644 board/telit/evk-pro3/readme.txt
delete mode 100644 configs/telit_evk_pro3_defconfig
diff --git a/board/telit/evk-pro3/barebox-2013.04.0-0001-watchdog-add-keep-alive-support.patch b/board/telit/evk-pro3/barebox-2013.04.0-0001-watchdog-add-keep-alive-support.patch
deleted file mode 100644
index 1551546031..0000000000
--- a/board/telit/evk-pro3/barebox-2013.04.0-0001-watchdog-add-keep-alive-support.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From b5e57a9f158a293b1151638336478af8a5aad0f0 Mon Sep 17 00:00:00 2001
-From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed, 14 Nov 2012 19:16:35 +0800
-Subject: [PATCH 1/5] watchdog: add keep alive support
-
-this will allow to ping the watchdog via poller
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----
- drivers/watchdog/Kconfig | 1 +
- drivers/watchdog/wd_core.c | 21 +++++++++++++++++++++
- include/watchdog.h | 2 ++
- 3 files changed, 24 insertions(+)
-
-diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index 2e2900c..0b4dc84 100644
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -4,6 +4,7 @@ config WATCHDOG_IMX_RESET_SOURCE
-
- menuconfig WATCHDOG
- bool "Watchdog support"
-+ select GENERIC_POLLER
- help
- Many platforms support a watchdog to keep track of a working machine.
- This framework provides routines to handle these watchdogs.
-diff --git a/drivers/watchdog/wd_core.c b/drivers/watchdog/wd_core.c
-index 3d0cfc6..a1b9e28 100644
---- a/drivers/watchdog/wd_core.c
-+++ b/drivers/watchdog/wd_core.c
-@@ -17,18 +17,39 @@
- #include <errno.h>
- #include <linux/ctype.h>
- #include <watchdog.h>
-+#include <poller.h>
-
- /*
- * Note: this simple framework supports one watchdog only.
- */
- static struct watchdog *watchdog;
-
-+static void watchdog_poller_func(struct poller_struct *poller)
-+{
-+ watchdog->keep_alive(watchdog);
-+}
-+
-+static struct poller_struct watchdog_poller = {
-+ .func = watchdog_poller_func,
-+};
-+
- int watchdog_register(struct watchdog *wd)
- {
- if (watchdog != NULL)
- return -EBUSY;
-
- watchdog = wd;
-+
-+ if (watchdog->keep_alive) {
-+ int ret;
-+
-+ ret = poller_register(&watchdog_poller);
-+ if (ret) {
-+ watchdog = NULL;
-+ return ret;
-+ }
-+ }
-+
- return 0;
- }
- EXPORT_SYMBOL(watchdog_register);
-diff --git a/include/watchdog.h b/include/watchdog.h
-index 3e2d08e..d5ecf2f 100644
---- a/include/watchdog.h
-+++ b/include/watchdog.h
-@@ -13,8 +13,10 @@
- #ifndef INCLUDE_WATCHDOG_H
- # define INCLUDE_WATCHDOG_H
-
-+
- struct watchdog {
- int (*set_timeout)(struct watchdog *, unsigned);
-+ void (*keep_alive)(struct watchdog *);
- };
-
- int watchdog_register(struct watchdog *);
---
-1.8.1.4
-
diff --git a/board/telit/evk-pro3/barebox-2013.04.0-0002-watchdog-add-at91sam9-watchdog-support.patch b/board/telit/evk-pro3/barebox-2013.04.0-0002-watchdog-add-at91sam9-watchdog-support.patch
deleted file mode 100644
index 1ca87695a4..0000000000
--- a/board/telit/evk-pro3/barebox-2013.04.0-0002-watchdog-add-at91sam9-watchdog-support.patch
+++ /dev/null
@@ -1,228 +0,0 @@
-From e1d54ffb987c346c45c20968be34c50c62a91c07 Mon Sep 17 00:00:00 2001
-From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed, 14 Nov 2012 19:17:47 +0800
-Subject: [PATCH 2/5] watchdog: add at91sam9 watchdog support
-
-with keep alive support
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----
- drivers/watchdog/Kconfig | 7 +++
- drivers/watchdog/Makefile | 1 +
- drivers/watchdog/at91sam9_wdt.c | 131 ++++++++++++++++++++++++++++++++++++++++
- drivers/watchdog/at91sam9_wdt.h | 38 ++++++++++++
- 4 files changed, 177 insertions(+)
- create mode 100644 drivers/watchdog/at91sam9_wdt.c
- create mode 100644 drivers/watchdog/at91sam9_wdt.h
-
-diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index 0b4dc84..98a21d7 100644
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -11,6 +11,13 @@ menuconfig WATCHDOG
-
- if WATCHDOG
-
-+config WATCHDOG_AT91SAM9X
-+ tristate "AT91SAM9X / AT91CAP9 watchdog"
-+ depends on ARCH_AT91
-+ help
-+ Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
-+ reboot your system when the timeout is reached.
-+
- config WATCHDOG_MXS28
- bool "i.MX28"
- depends on ARCH_IMX28
-diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
-index f522b88..3d15d52 100644
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_WATCHDOG) += wd_core.o
-+obj-$(CONFIG_WATCHDOG_AT91SAM9X) += at91sam9_wdt.o
- obj-$(CONFIG_WATCHDOG_MXS28) += im28wd.o
- obj-$(CONFIG_WATCHDOG_IMX_RESET_SOURCE) += imxwd.o
-diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
-new file mode 100644
-index 0000000..203d83a
---- /dev/null
-+++ b/drivers/watchdog/at91sam9_wdt.c
-@@ -0,0 +1,131 @@
-+/*
-+ * (c) 2012 Juergen Beisert <kernel@pengutronix.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Note: this driver works for the i.MX28 SoC. It might work for the
-+ * i.MX23 Soc as well, but is not tested yet.
-+ */
-+
-+#include <common.h>
-+#include <init.h>
-+#include <io.h>
-+#include <errno.h>
-+#include <malloc.h>
-+#include <watchdog.h>
-+
-+#include "at91sam9_wdt.h"
-+
-+struct at91sam9_wdt {
-+ struct watchdog wdt;
-+ void __iomem *base;
-+};
-+
-+#define to_at91sam9_wdt(h) container_of(h, struct at91sam9_wdt, wdt)
-+
-+#define wdt_read(at91wdt, field) \
-+ __raw_readl(at91wdt->base + field)
-+#define wdt_write(at91wdt, field, val) \
-+ __raw_writel((val), at91wdt->base + field)
-+
-+static void at91sam9_wdt_keep_alive(struct watchdog *wdt)
-+{
-+ struct at91sam9_wdt *at91wdt = to_at91sam9_wdt(wdt);
-+
-+ wdt_write(at91wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
-+}
-+
-+static int at91sam9_wdt_settimeout(struct watchdog *wdt, unsigned int timeout)
-+{
-+ struct at91sam9_wdt *at91wdt = to_at91sam9_wdt(wdt);
-+ unsigned int reg;
-+ unsigned int mr;
-+
-+ /* Check if disabled */
-+ mr = wdt_read(at91wdt, AT91_WDT_MR);
-+ if (mr & AT91_WDT_WDDIS) {
-+ pr_err("sorry, watchdog is disabled\n");
-+ return -EIO;
-+ }
-+
-+ if (!timeout) {
-+ wdt_write(at91wdt, AT91_WDT_MR, AT91_WDT_WDDIS);
-+ return 0;
-+ }
-+
-+ /*
-+ * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
-+ *
-+ * Since WDV is a 12-bit counter, the maximum period is
-+ * 4096 / 256 = 16 seconds.
-+ */
-+ reg = AT91_WDT_WDRSTEN /* causes watchdog reset */
-+ /* | AT91_WDT_WDRPROC causes processor reset only */
-+ | AT91_WDT_WDDBGHLT /* disabled in debug mode */
-+ | AT91_WDT_WDD /* restart at any time */
-+ | (timeout & AT91_WDT_WDV); /* timer value */
-+ wdt_write(at91wdt, AT91_WDT_MR, reg);
-+
-+ return 0;
-+}
-+
-+static int at91sam9_wdt_probe(struct device_d *dev)
-+{
-+ struct at91sam9_wdt *priv;
-+ struct watchdog *wdt;
-+ int ret;
-+ unsigned int mr;
-+
-+ priv = xzalloc(sizeof(struct at91sam9_wdt));
-+ priv->base = dev_request_mem_region(dev, 0);
-+ wdt = &priv->wdt;
-+
-+ wdt->set_timeout = at91sam9_wdt_settimeout;
-+ wdt->keep_alive = at91sam9_wdt_keep_alive;
-+
-+ /* Check if disabled */
-+ mr = wdt_read(priv, AT91_WDT_MR);
-+ if (mr & AT91_WDT_WDDIS) {
-+ dev_err(dev, "sorry, watchdog is disabled\n");
-+ ret = -EIO;
-+ goto err;
-+ }
-+
-+ ret = watchdog_register(wdt);
-+ if (ret != 0)
-+ goto err;
-+
-+ dev->priv = priv;
-+ return 0;
-+
-+err:
-+ free(priv);
-+ return ret;
-+}
-+
-+static void at91sam9_wdt_remove(struct device_d *dev)
-+{
-+ struct at91sam9_wdt *priv= dev->priv;
-+ watchdog_deregister(&priv->wdt);
-+ free(priv);
-+}
-+
-+static struct driver_d at91sam9_wdt_driver = {
-+ .name = "at91sam9_wdt",
-+ .probe = at91sam9_wdt_probe,
-+ .remove = at91sam9_wdt_remove,
-+};
-+
-+static int at91sam9_wdt_init(void)
-+{
-+ return platform_driver_register(&at91sam9_wdt_driver);
-+}
-+coredevice_initcall(at91sam9_wdt_init);
-diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
-new file mode 100644
-index 0000000..2b68c1a
---- /dev/null
-+++ b/drivers/watchdog/at91sam9_wdt.h
-@@ -0,0 +1,38 @@
-+/*
-+ * drivers/watchdog/at91sam9_wdt.h
-+ *
-+ * Copyright (C) 2007 Andrew Victor
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * Watchdog Timer (WDT) - System peripherals regsters.
-+ * Based on AT91SAM9261 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_WDT_H
-+#define AT91_WDT_H
-+
-+#define AT91_WDT_CR 0x00 /* Watchdog Control Register */
-+#define AT91_WDT_WDRSTT (1 << 0) /* Restart */
-+#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */
-+
-+#define AT91_WDT_MR 0x04 /* Watchdog Mode Register */
-+#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */
-+#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */
-+#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */
-+#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */
-+#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */
-+#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */
-+#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */
-+#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */
-+
-+#define AT91_WDT_SR 0x08 /* Watchdog Status Register */
-+#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */
-+#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */
-+
-+
-+#endif
---
-1.8.1.4
-
diff --git a/board/telit/evk-pro3/barebox-2013.04.0-0003-at91sam9260-9g20-add-wathdog-support.patch b/board/telit/evk-pro3/barebox-2013.04.0-0003-at91sam9260-9g20-add-wathdog-support.patch
deleted file mode 100644
index bf97200308..0000000000
--- a/board/telit/evk-pro3/barebox-2013.04.0-0003-at91sam9260-9g20-add-wathdog-support.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 3338bcb05479f1149420d4a0ea3904cb9e42eef5 Mon Sep 17 00:00:00 2001
-From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed, 14 Nov 2012 19:18:22 +0800
-Subject: [PATCH 3/5] at91sam9260/9g20: add wathdog support
-
-Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----
- arch/arm/mach-at91/at91sam9260_devices.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
-diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
-index 1c375ee..5885f91 100644
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -10,6 +10,7 @@
- *
- */
- #include <common.h>
-+#include <init.h>
- #include <sizes.h>
- #include <asm/armlinux.h>
- #include <asm/hardware.h>
-@@ -397,3 +398,14 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
- #else
- void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
- #endif
-+
-+#ifdef CONFIG_WATCHDOG_AT91SAM9X
-+static int at91_add_device_watchdog(void)
-+{
-+ add_generic_device("at91sam9_wdt", DEVICE_ID_SINGLE, NULL,
-+ AT91_WDT + AT91_BASE_SYS, 16, IORESOURCE_MEM, NULL);
-+
-+ return 0;
-+}
-+coredevice_initcall(at91_add_device_watchdog);
-+#endif
---
-1.8.1.4
-
diff --git a/board/telit/evk-pro3/barebox-2013.04.0-0004-at91sam9260-9g20-fix-wathdog-support.patch b/board/telit/evk-pro3/barebox-2013.04.0-0004-at91sam9260-9g20-fix-wathdog-support.patch
deleted file mode 100644
index cdfd026adf..0000000000
--- a/board/telit/evk-pro3/barebox-2013.04.0-0004-at91sam9260-9g20-fix-wathdog-support.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From e03bf0e3ad24898019b89eb9a6935d159c60268f Mon Sep 17 00:00:00 2001
-From: Fabio Porcedda <fabio.porcedda@gmail.com>
-Date: Thu, 17 Jan 2013 11:32:35 +0100
-Subject: [PATCH 4/5] at91sam9260/9g20: fix wathdog support
-
-Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
----
- arch/arm/mach-at91/at91sam9260_devices.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
-index 5885f91..df675d2 100644
---- a/arch/arm/mach-at91/at91sam9260_devices.c
-+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -403,7 +403,7 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
- static int at91_add_device_watchdog(void)
- {
- add_generic_device("at91sam9_wdt", DEVICE_ID_SINGLE, NULL,
-- AT91_WDT + AT91_BASE_SYS, 16, IORESOURCE_MEM, NULL);
-+ AT91_BASE_WDT, 16, IORESOURCE_MEM, NULL);
-
- return 0;
- }
---
-1.8.1.4
-
diff --git a/board/telit/evk-pro3/barebox-2013.04.0-0005-watchdog-enable-for-evk-pro3.patch b/board/telit/evk-pro3/barebox-2013.04.0-0005-watchdog-enable-for-evk-pro3.patch
deleted file mode 100644
index 837e8c632a..0000000000
--- a/board/telit/evk-pro3/barebox-2013.04.0-0005-watchdog-enable-for-evk-pro3.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 98c96ea36a4b3bb9b92dde849db5e8d6918b5168 Mon Sep 17 00:00:00 2001
-From: Fabio Porcedda <fabio.porcedda@gmail.com>
-Date: Thu, 17 Jan 2013 11:32:59 +0100
-Subject: [PATCH 5/5] watchdog: enable for evk-pro3
-
-Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
----
- arch/arm/configs/telit_evk_pro3_defconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm/configs/telit_evk_pro3_defconfig b/arch/arm/configs/telit_evk_pro3_defconfig
-index 050d176..436cecf 100644
---- a/arch/arm/configs/telit_evk_pro3_defconfig
-+++ b/arch/arm/configs/telit_evk_pro3_defconfig
-@@ -68,6 +68,8 @@ CONFIG_MCI_ATMEL=y
- CONFIG_LED=y
- CONFIG_LED_GPIO=y
- CONFIG_LED_TRIGGERS=y
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_AT91SAM9X=y
- CONFIG_FS_TFTP=y
- CONFIG_FS_FAT=y
- CONFIG_FS_FAT_LFN=y
---
-1.8.1.4
-
diff --git a/board/telit/evk-pro3/linux-3.9.config b/board/telit/evk-pro3/linux-3.9.config
deleted file mode 100644
index 99c2f2d2b6..0000000000
--- a/board/telit/evk-pro3/linux-3.9.config
+++ /dev/null
@@ -1,201 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_SOC_AT91SAM9260=y
-CONFIG_SOC_AT91SAM9263=y
-CONFIG_SOC_AT91SAM9G45=y
-CONFIG_SOC_AT91SAM9X5=y
-CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91SAM_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_IPV6_SIT_6RD=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_PWM=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_93CX6=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_DAVICOM_PHY=y
-CONFIG_MICREL_PHY=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=4
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_PINCTRL_AT91=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_SSB=m
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_ACORN_8x8=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_AT91=m
-CONFIG_USB_ATMEL_USBA=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_ACM_MS=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_MULTI_CDC=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_DMADEVICES=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC7=m
-CONFIG_AVERAGE=y
diff --git a/board/telit/evk-pro3/readme.txt b/board/telit/evk-pro3/readme.txt
deleted file mode 100644
index ace9dd4c17..0000000000
--- a/board/telit/evk-pro3/readme.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Buildroot board support for Telit EVK-PRO3 with Telit GE863-PRO3
-
-Official site:
- http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=10
-
-Build images:
- make telit_evk_pro3_defconfig
- make
-
- images built:
- - output/images/barebox.bin
- - output/images/zImage
- - output/images/rootfs.ubi
-
-
-Flash built images:
- The first time you need to bootstrap from Telit Official Release 221.07.1007,
- at the U-Boot prompt type:
- U-Boot> loadb
- send buildroot/output/images/barebox.bin
- U-Boot> go 0x20200000
-
- flash updated images using barebox through tftp:
- barebox:/ erase dev/self0; cp /mnt/tftp/barebox.bin /dev/self0
- barebox:/ erase /dev/nand0.kernel.bb; cp /mnt/tftp/zImage /dev/nand0.kernel.bb
- barebox:/ erase /dev/nand0.rootfs.bb; cp /mnt/tftp/rootfs.ubi /dev/nand0.rootfs.bb
- barebox:/ erase dev/env0
- barebox:/ reset
diff --git a/configs/telit_evk_pro3_defconfig b/configs/telit_evk_pro3_defconfig
deleted file mode 100644
index 946c2f04a6..0000000000
--- a/configs/telit_evk_pro3_defconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_arm926t=y
-
-# Linux headers same as kernel, a 3.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_9=y
-
-# Watchdog is armed by the first stage bootloader
-BR2_PACKAGE_BUSYBOX_WATCHDOG=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBI=y
-
-# Bootloader
-BR2_TARGET_BAREBOX=y
-BR2_TARGET_BAREBOX_CUSTOM_VERSION=y
-BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE="2013.04.0"
-BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR="board/telit/evk-pro3"
-BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="telit_evk_pro3"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.1"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/telit/evk-pro3/linux-3.9.config"
-BR2_LINUX_KERNEL_APPENDED_ZIMAGE=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="evk-pro3"
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 4/5] via_imx6_vab820_defconfig: remove broken defconfig
2017-03-01 8:30 [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig Arnout Vandecappelle
2017-03-01 8:30 ` [Buildroot] [PATCH 2/5] board/minnowboard: remove support for minnowboard Arnout Vandecappelle
2017-03-01 8:30 ` [Buildroot] [PATCH 3/5] telit_evk_pro3_defconfig: remove broken defconfig Arnout Vandecappelle
@ 2017-03-01 8:30 ` Arnout Vandecappelle
2017-03-05 20:57 ` Thomas Petazzoni
2017-03-01 8:30 ` [Buildroot] [PATCH 5/5] altera_*_defconfig: remove broken defconfigs Arnout Vandecappelle
2017-03-05 20:57 ` [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig Thomas Petazzoni
4 siblings, 1 reply; 13+ messages in thread
From: Arnout Vandecappelle @ 2017-03-01 8:30 UTC (permalink / raw)
To: buildroot
This defconfig has been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. Remove it, as well as it board
directory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gergely Imreh <imrehg@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
---
board/via/imx6_vab820/genimage.cfg | 38 ------------
board/via/imx6_vab820/post-image.sh | 17 -----
board/via/imx6_vab820/readme.txt | 120 ------------------------------------
configs/via_imx6_vab820_defconfig | 34 ----------
4 files changed, 209 deletions(-)
delete mode 100644 board/via/imx6_vab820/genimage.cfg
delete mode 100755 board/via/imx6_vab820/post-image.sh
delete mode 100644 board/via/imx6_vab820/readme.txt
delete mode 100644 configs/via_imx6_vab820_defconfig
diff --git a/board/via/imx6_vab820/genimage.cfg b/board/via/imx6_vab820/genimage.cfg
deleted file mode 100644
index 54acaa791b..0000000000
--- a/board/via/imx6_vab820/genimage.cfg
+++ /dev/null
@@ -1,38 +0,0 @@
-# Minimal SD card image for the VIA VAB-820 / AMOS-820
-#
-# The SD card must have at least 1 MB free at the beginning.
-# U-Boot is added before the filesystem partitions as is.
-# A FAT boot partition and an Ext4 root filesystem partition are required.
-
-image boot.vfat {
- vfat {
- files = {
- "imx6q-vab820.dtb",
- "uImage"
- }
- }
- size = 10M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.imx"
- offset = 1024
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- size = 512M
- }
-}
diff --git a/board/via/imx6_vab820/post-image.sh b/board/via/imx6_vab820/post-image.sh
deleted file mode 100755
index 00de33b01d..0000000000
--- a/board/via/imx6_vab820/post-image.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage \
- --rootpath "${TARGET_DIR}" \
- --tmppath "${GENIMAGE_TMP}" \
- --inputpath "${BINARIES_DIR}" \
- --outputpath "${BINARIES_DIR}" \
- --config "${GENIMAGE_CFG}"
-
-RET=${?}
-exit ${RET}
diff --git a/board/via/imx6_vab820/readme.txt b/board/via/imx6_vab820/readme.txt
deleted file mode 100644
index 908441f7b2..0000000000
--- a/board/via/imx6_vab820/readme.txt
+++ /dev/null
@@ -1,120 +0,0 @@
-VIA VAB-820/AMOS-820
-====================
-
-This file documents the Buildroot support for the VIA VAB-820 board and
-VIA AMOS-820 system, which are built around a Freescale i.MX6 Quad/Dual SoC.
-The kernel and u-boot is based on the official VIA BSP, which is in turn
-based on the Freescale Linux 3.10.17_1.0.0_ga BSP.
-
-
-Configuring and building Buildroot
-----------------------------------
-
-Start from the defconfig:
-
- $ make via_imx6_vab820_defconfig
-
-You can edit build options the usual way:
-
- $ make menuconfig
-
-When you are happy with the setup, run:
-
- $ make
-
-The result of the build with the default settings should be these files:
-
- output/images
- ??? boot.vfat
- ??? imx6q-vab820.dtb
- ??? rootfs.ext2
- ??? rootfs.ext4 -> rootfs.ext2
- ??? rootfs.tar
- ??? sdcard.img
- ??? u-boot.imx
- ??? uImage
-
-Copy the bootable `sdcard.img` onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M conv=fsync
-
-where "sdX" is the appropriate partition of your card.
-
-For details about the medium image layout, see the definition in
-`board/via/imx6_vab820/genimage.cfg`.
-
-
-Setting up your SD card manually
---------------------------------
-
-*Important*: pay attention which partition you are modifying so you don't
-accidentally erase the wrong file system, e.g your host computer or your
-external storage!
-
-In the default setup you need to create 2 partitions on your SD card:
-a boot partition and a root partition. In this guide and in the default u-boot
-settings the boot partition is vfat, while the root partition is ext4.
-
-You also need to leave space for u-boot at the beginning of the card, before
-all the partitions.
-
-For example, if your SD card is at /dev/sdX, using fdisk, and starting from
-an empty card, the steps are along these lines:
-
- # fdisk /dev/sdX
- n (new partition)
- p (primary partition)
- 1 (first partition)
- <return> (default first sector, should be at least 1MB from the beginning
- which is 2048 sectors if the sector size is 512KB)
- +50M (50MB size, as an example)
- t (switch partition type)
- b (select "W95 FAT32" type)
- n (the second partition)
- p (primary partition)
- 2 (second partition)
- <return> (default first sector)
- <return> (use all remaining space)
- p (print so the partition looks something like this below)
- Device Boot Start End Sectors Size Id Type
- /dev/sdX1 2048 104447 102400 50M b W95 FAT32
- /dev/sdX2 104448 15564799 15460352 7.4G 83 Linux
- w (save changes)
-
-After this you need to format the newly created file system:
-
- # mkfs.vfat -L boot /dev/sdX1
- # mkfs.ext4 -L rootfs /dev/sdX2
-
-Now the system can be copied onto the card. First copy the u-boot onto
-the region of the card before the first partition (starting from the
-root directory of buildroot):
-
- # dd if=output/images/u-boot.imx of=/dev/sdX bs=512 seek=2
-
-Mount the first partition /dev/sdX1, and copy the kernel and the
-compiled device tree:
-
- # cp output/images/uImage /mnt/<BOOT-PARTITION>
- # cp output/images/imx6q-vab820.dtb /mnt/<BOOT-PARTITION>
-
-Finally, copy the root file system onto the mounted (empty) /dev/sdX2
-rootfs partition:
-
- # tar xf output/images/rootfs.tar -C /mnt/<ROOTFS-PARTITION>
-
-
-Booting
--------
-
-To use the on-card u-boot, you need adjust jumper J11 located just next to
-the SD card slot on the VAB-820 board. The correct position for SD card
-boot is jumping the two pins towards the inside of the board.
-
-To modify the default boot parameters compiled into u-boot, you can create
-a boot script with the file name `boot.scr` and place it onto the boot
-partition (same directory as `uImage`).
-
-If you want to have the login prompt on the serial debug line instead of
-the console, adjust the buildroot settings as:
-"System Configuration > getty options > TTY port > ttymxc1"
diff --git a/configs/via_imx6_vab820_defconfig b/configs/via_imx6_vab820_defconfig
deleted file mode 100644
index fa646f07dc..0000000000
--- a/configs/via_imx6_vab820_defconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_cortex_a9=y
-BR2_ARM_ENABLE_VFP=y
-
-# Linux headers same as kernel, a 3.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/viaembedded/vab820-kernel-bsp.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="via_3.10.17_2.0.6"
-BR2_LINUX_KERNEL_DEFCONFIG="via_vab820"
-BR2_LINUX_KERNEL_UIMAGE=y
-BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-vab820"
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="mx6qvab820"
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/viaembedded/vab820-uboot-bsp.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="via_3.10.17_2.0.6"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/via/imx6_vab820/post-image.sh"
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 5/5] altera_*_defconfig: remove broken defconfigs
2017-03-01 8:30 [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig Arnout Vandecappelle
` (2 preceding siblings ...)
2017-03-01 8:30 ` [Buildroot] [PATCH 4/5] via_imx6_vab820_defconfig: " Arnout Vandecappelle
@ 2017-03-01 8:30 ` Arnout Vandecappelle
2017-03-05 20:57 ` Thomas Petazzoni
2017-03-05 20:57 ` [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig Thomas Petazzoni
4 siblings, 1 reply; 13+ messages in thread
From: Arnout Vandecappelle @ 2017-03-01 8:30 UTC (permalink / raw)
To: buildroot
These defconfigs have been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. In addition, the rocketboards git
repository used by these defconfigs hasn't been reachable for more than
half a year. Finally, these defconfigs don't even use the
BR2_TARGET_UBOOT_ALTERA_SOCFPGA_IMAGE_CRC option so they are not a
great example for this family of targets.
Remove these defconfigs, as well as the board directory. Both are
removed in a single commit to avoid having an inconsistent readme.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Jan Viktorin <viktorin@rehivetech.com>
Cc: Charles Manning <cdhmanning@gmail.com>
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
---
board/altera/post-image.sh | 8 -
board/altera/readme.txt | 165 -----
.../uboot-sockit-preloader-sample-design.patch | 820 ---------------------
configs/altera_socdk_defconfig | 33 -
configs/altera_sockit_defconfig | 37 -
5 files changed, 1063 deletions(-)
delete mode 100755 board/altera/post-image.sh
delete mode 100644 board/altera/readme.txt
delete mode 100644 board/altera/sockit/uboot-sockit-preloader-sample-design.patch
delete mode 100644 configs/altera_socdk_defconfig
delete mode 100644 configs/altera_sockit_defconfig
diff --git a/board/altera/post-image.sh b/board/altera/post-image.sh
deleted file mode 100755
index 03e7819aa6..0000000000
--- a/board/altera/post-image.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-# post-image.sh for SoCkit/SoCDK
-# 2014, "Roman Diouskine" <roman.diouskine@savoirfairelinux.com>
-# 2014, "Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>
-
-# create a DTB file copy with the name expected by the u-boot config
-# Name of the DTB is passed as the second argument to the script.
-cp -af $BINARIES_DIR/${2}.dtb $BINARIES_DIR/socfpga.dtb
diff --git a/board/altera/readme.txt b/board/altera/readme.txt
deleted file mode 100644
index 1894a7907d..0000000000
--- a/board/altera/readme.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-SoCkit, SoC Development Kit
-
-Intro
-=====
-
-This is the buildroot board support for the Arrow SoCkit Evaluation Board
-and the Altera Cyclone 5 Development Board.
-
-A good source of information for Arrow SoCkit:
-http://www.rocketboards.org/foswiki/Documentation/ArrowSoCKitEvaluationBoard
-
-More information about SoC DK:
-https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-cyclone-v-soc.html
-
-How it works
-============
-
-Boot process:
--------------
-
-In summary, the bootloader has multiple stages, an hardcoded boot routine is
-loaded from an on-chip ROM.
-
- - That first stage is scanning the SD card's partition table to find
- partition having the 0xA2 type.
- - This partition is expected to contain a boot image on its first 60 Kb,
- because u-boot is bigger, we must fill it with a preloader (u-boot-spl)
- which will load the u-boot image.
- - Then the u-boot image will load the Linux kernel.
-
-A good source of information for the boot process is:
-http://xillybus.com/tutorials/u-boot-image-altera-soc
-
-Note for the SPL:
-The SPL generated by the u-boot from Rocketboards doesn't seems to work,
-therefore we provide a patch for {uboot-PKG}/board/altera/socfpga_cyclone5/*
-based on the files generated with the Altera example design.
-
-For more information about this files please look at:
-http://www.rocketboards.org/foswiki/Documentation/PreloaderUbootCustomization#Common_Source_Code
-
-How to build it
-===============
-
-Configure Buildroot
--------------------
-
-The altera_sockit_defconfig configuration is a minimal configuration with
-all that is required to bring the SoCkit:
-
- $ make altera_sockit_defconfig
-
-and for the SoC Development Board:
-
- $ make altera_sockdk_defconfig
-
-Build everything
-----------------
-
-Note: you will need to have access to the network, since Buildroot will
-download the packages' sources.
-
- $ make
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
- output/images/
- ??? rootfs.ext2
- ??? rootfs.ext3 -> rootfs.ext2
- ??? rootfs.tar
- ??? socfpga_cyclone5_sockit.dtb or socfpga_cyclone5_socdk.dtb
- ??? socfpga.dtb
- ??? u-boot.img
- ??? u-boot-spl.bin
- ??? uImage
-
-
-Signing the Preloader
----------------------
-
-*** BEWARE ****
-The u-boot-spl.bin must be signed using the Altera's tool "mkpimage".
-This tool comes as a part of the Altera development environnment (SoC EDS).
-A fork of this tool have been done by Maxime Hadjinlian and can be found here:
-https://github.com/maximeh/mkpimage
-
-Remember that without signing the u-boot-spl.bin, the board will not boot !!!
-
- $ mkpimage u-boot-spl.bin -o u-boot-spl-signed.bin
-
-Prepare your SDcard
-===================
-
-A good source of information for the partitioning process is:
-http://www.rocketboards.org/foswiki/view/Projects/SoCKitLinaroLinuxDesktop#Partition_the_SD_Card
-
-Create the SDcard partition table
-----------------------------------
-
-Determine the device associated to the SD card:
-
- $ cat /proc/partitions
-
-let's assume it is /dev/mmcblk0:
-
- $ sudo fdisk /dev/mmcblk0
-
-Delete all previous partitions with 'd' then create the new partition table,
-using these options, pressing enter after each one:
-
- * n p 1 9000000 +20480K t 1 b
- * n p 2 4096 +4496384K t 83
- * n p 3 2048 +1024K t 3 a2
-
-Using the 'p' option, the SD card's partition must look like this:
-
-Device Boot Start End Blocks Id System
-/dev/mmcblk0p1 9000000 9041919 20960 b W95 FAT32
-/dev/mmcblk0p2 4096 8996863 4496384 83 Linux
-/dev/mmcblk0p3 2048 4095 1024 a2 Unknown
-
-Then write the partition table using 'w' and exit.
-
-Make partition one a DOS partition:
-
- $ sudo mkdosfs /dev/mmcblk0p1
-
-Install the binaries to the SDcard
-----------------------------------
-
-Remember your binaries are located in output/images/, go inside that directory:
-
- $ cd output/images
-
-The partition with type a2 is the partition scan by the first bootloader stage
-in the SoCkit ROM to find the next bootloader stage so we must write the signed
-preloader and the u-boot binaries in that partition:
-
- $ sudo dd if=u-boot-spl-signed.bin of=/dev/mmcblk0p3 bs=64k seek=0
- $ sudo dd if=u-boot.img of=/dev/mmcblk0p3 bs=64k seek=4
-
-Copy the Linux kernel and its Device tree:
-
- $ sudo mkdir /mnt/sdcard
- $ sudo mount /dev/mmcblk0p1 /mnt/sdcard
- $ sudo cp socfpga.dtb uImage /mnt/sdcard
- $ sudo umount /mnt/sdcard
-
-Copy the rootfs:
-
- $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k
- $ sudo sync
-
-It's Done!
-
-Finish
-======
-
-Eject your SDcard, insert it in your SoCkit, and power it up.
-
-if you want a serial console, you can plug a micro B USB cable on the USB-UART
-port, the serial port config to used is 57600/8-N-1.
diff --git a/board/altera/sockit/uboot-sockit-preloader-sample-design.patch b/board/altera/sockit/uboot-sockit-preloader-sample-design.patch
deleted file mode 100644
index ddf0abce77..0000000000
--- a/board/altera/sockit/uboot-sockit-preloader-sample-design.patch
+++ /dev/null
@@ -1,820 +0,0 @@
-From c70f2ebb350da20af1a0ed4b7960b8e5a1952713 Mon Sep 17 00:00:00 2001
-From: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
-Date: Thu, 20 Feb 2014 11:51:31 -0500
-Subject: [PATCH] board: add to sockit a working preloader design
-
----
- board/altera/socfpga_cyclone5/build.h | 2 +-
- board/altera/socfpga_cyclone5/iocsr_config.c | 314 ++++++++++-----------
- board/altera/socfpga_cyclone5/pinmux_config.c | 32 +--
- board/altera/socfpga_cyclone5/pinmux_config.h | 8 +-
- board/altera/socfpga_cyclone5/sdram/sdram_config.h | 14 +-
- .../altera/socfpga_cyclone5/sdram/sequencer_auto.h | 16 +-
- .../sdram/sequencer_auto_ac_init.c | 16 +-
- .../socfpga_cyclone5/sdram/sequencer_defines.h | 34 +--
- 8 files changed, 218 insertions(+), 218 deletions(-)
-
-diff --git a/board/altera/socfpga_cyclone5/build.h b/board/altera/socfpga_cyclone5/build.h
-index e5d9c3c..a369015 100644
---- a/board/altera/socfpga_cyclone5/build.h
-+++ b/board/altera/socfpga_cyclone5/build.h
-@@ -29,7 +29,7 @@
- * Handoff files must provide user option whether to
- * enable watchdog during preloader execution phase
- */
--#define CONFIG_PRELOADER_WATCHDOG_ENABLE (0)
-+#define CONFIG_PRELOADER_WATCHDOG_ENABLE (1)
-
- /*
- * Handoff files must provide user option whether to enable
-diff --git a/board/altera/socfpga_cyclone5/iocsr_config.c b/board/altera/socfpga_cyclone5/iocsr_config.c
-index fa663e1..90fc154 100644
---- a/board/altera/socfpga_cyclone5/iocsr_config.c
-+++ b/board/altera/socfpga_cyclone5/iocsr_config.c
-@@ -7,113 +7,113 @@ const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH
- 0xC0000000,
- 0x0000003F,
- 0x00008000,
-- 0x00020080,
-- 0x08020000,
-- 0x08000000,
-- 0x00018020,
-+ 0x00060180,
-+ 0x18060000,
-+ 0x18000000,
-+ 0x00018060,
- 0x00000000,
- 0x00004000,
-- 0x00010040,
-- 0x04010000,
-- 0x04000000,
-- 0x00000010,
-- 0x00004010,
-+ 0x000300C0,
-+ 0x0C030000,
-+ 0x0C000000,
-+ 0x00000030,
-+ 0x0000C030,
- 0x00002000,
-- 0x00020000,
-- 0x02008000,
-- 0x02000000,
-- 0x00000008,
-- 0x00002008,
-+ 0x00018060,
-+ 0x06018000,
-+ 0x06000000,
-+ 0x00000018,
-+ 0x00006018,
- 0x00001000,
- };
-
- const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = {
-- 0x000C0300,
-- 0x10040000,
-- 0x100000C0,
-- 0x00000040,
-- 0x00010040,
-+ 0x00100000,
-+ 0x300C0000,
-+ 0x300000C0,
-+ 0x000000C0,
-+ 0x000300C0,
- 0x00008000,
- 0x00080000,
-- 0x18060000,
-- 0x18000000,
-- 0x00000060,
-- 0x00018060,
-+ 0x20000000,
-+ 0x00000000,
-+ 0x00000080,
-+ 0x00020000,
- 0x00004000,
-- 0x00010040,
-+ 0x000300C0,
- 0x10000000,
-- 0x04000000,
-- 0x00000010,
-- 0x00004010,
-+ 0x0C000000,
-+ 0x00000030,
-+ 0x0000C030,
- 0x00002000,
-- 0x06008020,
-- 0x02008000,
-+ 0x06018060,
-+ 0x06018000,
- 0x01FE0000,
- 0xF8000000,
- 0x00000007,
- 0x00001000,
-- 0x00004010,
-- 0x01004000,
-- 0x01000000,
-- 0x00003004,
-- 0x00001004,
-+ 0x0000C030,
-+ 0x0300C000,
-+ 0x03000000,
-+ 0x0000300C,
-+ 0x0000300C,
- 0x00000800,
- 0x00000000,
- 0x00000000,
-- 0x00800000,
-- 0x00000002,
-+ 0x01800000,
-+ 0x00000006,
- 0x00002000,
- 0x00000400,
- 0x00000000,
-- 0x00401000,
-+ 0x00C03000,
- 0x00000003,
- 0x00000000,
- 0x00000000,
- 0x00000200,
-- 0x00600802,
-+ 0x00601806,
- 0x00000000,
-- 0x80200000,
-- 0x80000600,
-- 0x00000200,
-+ 0x80600000,
-+ 0x80000601,
-+ 0x00000601,
- 0x00000100,
-- 0x00300401,
-- 0xC0100400,
-- 0x40100000,
-- 0x40000300,
-- 0x000C0100,
-+ 0x00300C03,
-+ 0xC0300C00,
-+ 0xC0300000,
-+ 0xC0000300,
-+ 0x000C0300,
- 0x00000080,
- };
-
- const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = {
-- 0x80040100,
-+ 0x300C0300,
- 0x00000000,
- 0x0FF00000,
- 0x00000000,
-- 0x0C010040,
-+ 0x0C0300C0,
- 0x00008000,
-- 0x18020080,
-- 0x00000000,
-- 0x08000000,
-- 0x00040020,
-- 0x06018060,
-+ 0x18060180,
-+ 0x18060000,
-+ 0x18000000,
-+ 0x00018060,
-+ 0x00018060,
- 0x00004000,
-- 0x0C010040,
-- 0x04010000,
-+ 0x000300C0,
-+ 0x0C030000,
- 0x00000030,
- 0x00000000,
-- 0x03004010,
-+ 0x0300C030,
- 0x00002000,
-- 0x06008020,
-- 0x02008000,
-- 0x02000018,
-- 0x00006008,
-- 0x01802008,
-+ 0x00018060,
-+ 0x06018000,
-+ 0x06000000,
-+ 0x00000018,
-+ 0x00006018,
- 0x00001000,
-- 0x03004010,
-- 0x01004000,
-- 0x0100000C,
-- 0x00003004,
-- 0x00C01004,
-+ 0x0000C030,
-+ 0x00000000,
-+ 0x03000000,
-+ 0x0000000C,
-+ 0x00C0300C,
- 0x00000800,
- };
-
-@@ -170,14 +170,14 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0xA0000034,
- 0x0D000001,
- 0x6068030C,
-- 0xC7034018,
-- 0x0E381A01,
-+ 0xCF034059,
-+ 0x1E781A03,
- 0x8030C0D0,
-- 0x34018606,
-- 0x01A01C70,
-+ 0x34059606,
-+ 0x01A03CF0,
- 0x0C0D0000,
-- 0x18606803,
-- 0x01C70340,
-+ 0x59606803,
-+ 0x03CF0340,
- 0xD000001A,
- 0x068030C0,
- 0x10040000,
-@@ -244,15 +244,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0xA0000034,
- 0x0D000001,
- 0x6068030C,
-- 0xC7034018,
-- 0x0E381A01,
-+ 0xCF034059,
-+ 0x1E781A03,
- 0x8030C0D0,
-- 0x34018606,
-+ 0x34059606,
- 0x01A00000,
- 0x0C0D0000,
-- 0x18606803,
-- 0x01C70340,
-- 0xD00E381A,
-+ 0x59606803,
-+ 0x03CF0340,
-+ 0xD01E781A,
- 0x068030C0,
- 0x10040000,
- 0x00200000,
-@@ -273,7 +273,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0xAA0D4000,
- 0x01C3A810,
- 0xAA0D4000,
-- 0x01C3A808,
-+ 0x01C3A810,
- 0xAA0D4000,
- 0x01C3A810,
- 0x00040100,
-@@ -301,7 +301,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0x2A835000,
- 0x0070EA04,
- 0x2A835000,
-- 0x0070EA02,
-+ 0x0070EA04,
- 0x2A835000,
- 0x0070EA04,
- 0x00010040,
-@@ -321,15 +321,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0x14864000,
- 0x69A47A05,
- 0xCBCF23D7,
-- 0xF41E791E,
-- 0x034ED348,
-+ 0xF5DE791E,
-+ 0x0356D348,
- 0x821A0000,
- 0x0000D000,
- 0x01860680,
- 0xD769A47A,
- 0x1ECBCF23,
-- 0x48F41E79,
-- 0x00034ED3,
-+ 0x48F5DE79,
-+ 0x000356D3,
- 0x00080200,
- 0x00001000,
- 0x00080200,
-@@ -347,7 +347,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0xAA0D4000,
- 0x01C3A810,
- 0xAA0D4000,
-- 0x01C3A808,
-+ 0x01C3A810,
- 0xAA0D4000,
- 0x01C3A810,
- 0x00040100,
-@@ -375,7 +375,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0x2A835000,
- 0x0070EA04,
- 0x2A835000,
-- 0x0070EA02,
-+ 0x0070EA04,
- 0x2A835000,
- 0x0070EA04,
- 0x00015000,
-@@ -395,15 +395,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0x14864000,
- 0x69A47A05,
- 0xCBCF23D7,
-- 0xF41E791E,
-- 0x034ED348,
-- 0x821A00C3,
-+ 0xF5DE791E,
-+ 0x0356D348,
-+ 0x821A02CB,
- 0x0000D000,
- 0x00000680,
- 0xD769A47A,
- 0x1ECBCF23,
-- 0x48F41E79,
-- 0x00034ED3,
-+ 0x48F5DE79,
-+ 0x000356D3,
- 0x00080200,
- 0x00001000,
- 0x00080200,
-@@ -421,7 +421,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0xAA0D4000,
- 0x01C3A810,
- 0xAA0D4000,
-- 0x01C3A808,
-+ 0x01C3A810,
- 0xAA0D4000,
- 0x01C3A810,
- 0x00040100,
-@@ -449,7 +449,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0x2A835000,
- 0x0070EA04,
- 0x2A835000,
-- 0x0070EA02,
-+ 0x0070EA04,
- 0x2A835000,
- 0x0070EA04,
- 0x00010040,
-@@ -469,15 +469,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0x14864000,
- 0x69A47A05,
- 0xCBCF23D7,
-- 0xF41E791E,
-- 0x034ED348,
-+ 0xF5DE791E,
-+ 0x0356D348,
- 0x821A0000,
- 0x0000D000,
- 0x00000680,
- 0xD769A47A,
- 0x1ECBCF23,
-- 0x48F41E79,
-- 0x00034ED3,
-+ 0x48F5DE79,
-+ 0x000356D3,
- 0x00080200,
- 0x00001000,
- 0x00080200,
-@@ -495,7 +495,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0xAA0D4000,
- 0x01C3A810,
- 0xAA0D4000,
-- 0x01C3A808,
-+ 0x01C3A810,
- 0xAA0D4000,
- 0x01C3A810,
- 0x00040100,
-@@ -523,7 +523,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0x2A835000,
- 0x0070EA04,
- 0x2A835000,
-- 0x0070EA02,
-+ 0x0070EA04,
- 0x2A835000,
- 0x0070EA04,
- 0x00010040,
-@@ -543,15 +543,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0x14864000,
- 0x69A47A05,
- 0xCBCF23D7,
-- 0xF41E791E,
-- 0x034ED348,
-+ 0xF5DE791E,
-+ 0x0356D348,
- 0x821A0000,
- 0x0000D000,
- 0x00000680,
- 0xD769A47A,
- 0x1ECBCF23,
-- 0x48F41E79,
-- 0x00034ED3,
-+ 0x48F5DE79,
-+ 0x000356D3,
- 0x00080200,
- 0x00001000,
- 0x00080200,
-@@ -567,80 +567,80 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
- 0x04000002,
- 0x00820000,
- 0x00489000,
-- 0x001A1A1A,
-- 0x085506A0,
-- 0x0000E1D4,
-- 0x045506A0,
-- 0x0000E1D4,
-- 0x085506A0,
-- 0x8000E1D4,
-+ 0x801A1A1A,
-+ 0x00000200,
-+ 0x80000004,
-+ 0x00000200,
-+ 0x80000004,
-+ 0x00000200,
-+ 0x80000004,
- 0x00000200,
- 0x00000004,
-- 0x04000000,
-- 0x00000009,
-- 0x00002410,
-+ 0x00040000,
-+ 0x10000000,
-+ 0x00000000,
- 0x00000040,
-- 0x41000000,
-- 0x00002082,
-- 0x00000350,
-- 0x000000DA,
-+ 0x00010000,
-+ 0x40002000,
-+ 0x00000100,
-+ 0x40000002,
-+ 0x00000100,
-+ 0x40000002,
- 0x00000100,
- 0x40000002,
- 0x00000100,
- 0x00000002,
-- 0x042A8350,
-- 0x000070EA,
-- 0x86000000,
-- 0x08000004,
-+ 0x00020000,
-+ 0x08000000,
- 0x00000000,
-- 0x00482000,
-- 0x21800000,
-- 0x00101061,
-- 0x021541A8,
-- 0x00003875,
-- 0x011541A8,
-- 0x00003875,
-- 0x021541A8,
-- 0x20003875,
-+ 0x00000020,
-+ 0x00008000,
-+ 0x20001000,
-+ 0x00000080,
-+ 0x20000001,
-+ 0x00000080,
-+ 0x20000001,
-+ 0x00000080,
-+ 0x20000001,
- 0x00000080,
- 0x00000001,
-- 0x41000000,
-- 0x00000002,
-- 0x00FF0904,
-+ 0x00010000,
-+ 0x04000000,
-+ 0x00FF0000,
- 0x00000000,
-- 0x90400000,
-- 0x00000820,
-+ 0x00004000,
-+ 0x00000800,
- 0x80000001,
-- 0x38D612AF,
-- 0x86F8E38E,
-- 0x0A0A78B4,
-- 0x000D020A,
-+ 0x00041419,
-+ 0x40000000,
-+ 0x04000816,
-+ 0x000D0000,
- 0x00006800,
-- 0x028A4320,
-- 0xEBB4D23D,
-- 0x8F65E791,
-- 0xA47A0F3C,
-- 0x0001A769,
-- 0x00410D00,
-+ 0x00000340,
-+ 0xD000001A,
-+ 0x06800000,
-+ 0x00340000,
-+ 0x0001A000,
-+ 0x00000D00,
- 0x40000068,
-- 0x3D000003,
-- 0x91EBB4D2,
-- 0x3C8F65E7,
-- 0x69A47A0F,
-- 0x000001A7,
-+ 0x1A000003,
-+ 0x00D00000,
-+ 0x00068000,
-+ 0x00003400,
-+ 0x000001A0,
-+ 0x00000401,
-+ 0x00000008,
- 0x00000401,
- 0x00000008,
- 0x00000401,
- 0x00000008,
-- 0x00000540,
-- 0x000003A8,
-- 0x10AA0D40,
-- 0x8001C3A8,
-+ 0x00000401,
-+ 0x80000008,
- 0x0000007F,
-+ 0x20000000,
- 0x00000000,
-- 0x00004060,
-- 0xE1208000,
-+ 0xE0000080,
- 0x0000001F,
-- 0x00004100,
-+ 0x00004000,
- };
-
-diff --git a/board/altera/socfpga_cyclone5/pinmux_config.c b/board/altera/socfpga_cyclone5/pinmux_config.c
-index 730067e..cfd74cd 100644
---- a/board/altera/socfpga_cyclone5/pinmux_config.c
-+++ b/board/altera/socfpga_cyclone5/pinmux_config.c
-@@ -23,7 +23,7 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
- 0, /* EMACIO18 */
- 0, /* EMACIO19 */
- 3, /* FLASHIO0 */
-- 3, /* FLASHIO1 */
-+ 0, /* FLASHIO1 */
- 3, /* FLASHIO2 */
- 3, /* FLASHIO3 */
- 0, /* FLASHIO4 */
-@@ -34,25 +34,25 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
- 3, /* FLASHIO9 */
- 3, /* FLASHIO10 */
- 3, /* FLASHIO11 */
-- 3, /* GENERALIO0 */
-- 3, /* GENERALIO1 */
-- 3, /* GENERALIO2 */
-- 3, /* GENERALIO3 */
-- 3, /* GENERALIO4 */
-- 3, /* GENERALIO5 */
-- 3, /* GENERALIO6 */
-- 3, /* GENERALIO7 */
-- 3, /* GENERALIO8 */
-+ 0, /* GENERALIO0 */
-+ 1, /* GENERALIO1 */
-+ 1, /* GENERALIO2 */
-+ 1, /* GENERALIO3 */
-+ 1, /* GENERALIO4 */
-+ 0, /* GENERALIO5 */
-+ 0, /* GENERALIO6 */
-+ 0, /* GENERALIO7 */
-+ 0, /* GENERALIO8 */
- 3, /* GENERALIO9 */
- 3, /* GENERALIO10 */
- 3, /* GENERALIO11 */
- 3, /* GENERALIO12 */
-- 2, /* GENERALIO13 */
-- 2, /* GENERALIO14 */
-- 3, /* GENERALIO15 */
-- 3, /* GENERALIO16 */
-- 2, /* GENERALIO17 */
-- 2, /* GENERALIO18 */
-+ 0, /* GENERALIO13 */
-+ 0, /* GENERALIO14 */
-+ 1, /* GENERALIO15 */
-+ 1, /* GENERALIO16 */
-+ 1, /* GENERALIO17 */
-+ 1, /* GENERALIO18 */
- 0, /* GENERALIO19 */
- 0, /* GENERALIO20 */
- 0, /* GENERALIO21 */
-diff --git a/board/altera/socfpga_cyclone5/pinmux_config.h b/board/altera/socfpga_cyclone5/pinmux_config.h
-index fb483ab..64c750a 100644
---- a/board/altera/socfpga_cyclone5/pinmux_config.h
-+++ b/board/altera/socfpga_cyclone5/pinmux_config.h
-@@ -11,15 +11,15 @@
- #define CONFIG_HPS_UART0 (1)
- #define CONFIG_HPS_UART1 (0)
- #define CONFIG_HPS_TRACE (0)
--#define CONFIG_HPS_I2C0 (1)
--#define CONFIG_HPS_I2C1 (0)
-+#define CONFIG_HPS_I2C0 (0)
-+#define CONFIG_HPS_I2C1 (1)
- #define CONFIG_HPS_I2C2 (0)
- #define CONFIG_HPS_I2C3 (0)
- #define CONFIG_HPS_SPIM0 (1)
--#define CONFIG_HPS_SPIM1 (0)
-+#define CONFIG_HPS_SPIM1 (1)
- #define CONFIG_HPS_SPIS0 (0)
- #define CONFIG_HPS_SPIS1 (0)
--#define CONFIG_HPS_CAN0 (1)
-+#define CONFIG_HPS_CAN0 (0)
- #define CONFIG_HPS_CAN1 (0)
-
- #define CONFIG_HPS_SDMMC_BUSWIDTH (4)
-diff --git a/board/altera/socfpga_cyclone5/sdram/sdram_config.h b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
-index b90d6f3..dd027ef 100755
---- a/board/altera/socfpga_cyclone5/sdram/sdram_config.h
-+++ b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
-@@ -4,16 +4,16 @@
- #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE (2)
- #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL (8)
- #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER (0)
--#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN (1)
--#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN (1)
-+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN (0)
-+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN (0)
- #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN (1)
- #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT (10)
- #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN (0)
- #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS (0)
--#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL (6)
-+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL (8)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL (0)
--#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL (7)
--#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD (4)
-+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL (11)
-+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD (3)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW (12)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC (104)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI (3120)
-@@ -21,7 +21,7 @@
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP (6)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR (6)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR (4)
--#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP (4)
-+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP (3)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS (14)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC (20)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD (4)
-@@ -33,7 +33,7 @@
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS (15)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS (3)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS (1)
--#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH (40)
-+#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH (32)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH (8)
- #define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN (0)
- #define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL (2)
-diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
-index e8c5484..919676d 100644
---- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
-+++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
-@@ -34,7 +34,7 @@
- #define __RW_MGR_ac_read_en 0x21
- #define __RW_MGR_ac_mrs3_mirr 0x0C
- #define __RW_MGR_ac_mrs2 0x05
--#define __RW_MGR_CONTENT_ac_mrs1 0x10090044
-+#define __RW_MGR_CONTENT_ac_mrs1 0x10090006
- #define __RW_MGR_CONTENT_ac_mrs3 0x100B0000
- #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata_wl_1 0x18980000
- #define __RW_MGR_CONTENT_ac_act_1 0x106B0000
-@@ -46,8 +46,8 @@
- #define __RW_MGR_CONTENT_ac_init_reset_0_cke_0 0x20700000
- #define __RW_MGR_CONTENT_ac_read_bank_0_1_norden 0x10580008
- #define __RW_MGR_CONTENT_ac_pre_all 0x10280400
--#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080431
--#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080530
-+#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080471
-+#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080570
- #define __RW_MGR_CONTENT_ac_read_bank_0_0 0x13580000
- #define __RW_MGR_CONTENT_ac_write_bank_0_col_1 0x1C980008
- #define __RW_MGR_CONTENT_ac_read_bank_0_1 0x13580008
-@@ -55,21 +55,21 @@
- #define __RW_MGR_CONTENT_ac_write_bank_1_col_1 0x1C9B0008
- #define __RW_MGR_CONTENT_ac_write_bank_0_col_0 0x1C980000
- #define __RW_MGR_CONTENT_ac_read_bank_1_0 0x135B0000
--#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0024
-+#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0006
- #define __RW_MGR_CONTENT_ac_read_bank_1_1 0x135B0008
- #define __RW_MGR_CONTENT_ac_des_odt_1 0x38780000
--#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804C8
-+#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804E8
- #define __RW_MGR_CONTENT_ac_zqcl 0x10380400
- #define __RW_MGR_CONTENT_ac_write_predata 0x38F80000
--#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080449
-+#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080469
- #define __RW_MGR_CONTENT_ac_ref 0x10480000
- #define __RW_MGR_CONTENT_ac_nop 0x30780000
- #define __RW_MGR_CONTENT_ac_rdimm 0x10780000
--#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090010
-+#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090218
- #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata 0x18180000
- #define __RW_MGR_CONTENT_ac_read_en 0x33780000
- #define __RW_MGR_CONTENT_ac_mrs3_mirr 0x100B0000
--#define __RW_MGR_CONTENT_ac_mrs2 0x100A0008
-+#define __RW_MGR_CONTENT_ac_mrs2 0x100A0218
-
- #define __RW_MGR_READ_B2B_WAIT2 0x6A
- #define __RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x31
-diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
-index e16efa1..20b4ca1 100644
---- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
-+++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
-@@ -6,16 +6,16 @@ const alt_u32 ac_rom_init[36] =
- {
- 0x20700000,
- 0x20780000,
-- 0x10080431,
-- 0x10080530,
-- 0x10090044,
-- 0x100a0008,
-+ 0x10080471,
-+ 0x10080570,
-+ 0x10090006,
-+ 0x100a0218,
- 0x100b0000,
- 0x10380400,
-- 0x10080449,
-- 0x100804c8,
-- 0x100a0024,
-- 0x10090010,
-+ 0x10080469,
-+ 0x100804e8,
-+ 0x100a0006,
-+ 0x10090218,
- 0x100b0000,
- 0x30780000,
- 0x38780000,
-diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
-index 52faf3f..b85b85c 100644
---- a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
-+++ b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
-@@ -1,28 +1,28 @@
- #ifndef _SEQUENCER_DEFINES_H_
- #define _SEQUENCER_DEFINES_H_
-
--#define AC_ROM_MR1_MIRR 0000000100100
-+#define AC_ROM_MR1_MIRR 0000000000110
- #define AC_ROM_MR1_OCD_ENABLE
--#define AC_ROM_MR2_MIRR 0000000010000
-+#define AC_ROM_MR2_MIRR 0001000011000
- #define AC_ROM_MR3_MIRR 0000000000000
- #define AC_ROM_MR0_CALIB
--#define AC_ROM_MR0_DLL_RESET_MIRR 0010011001000
--#define AC_ROM_MR0_DLL_RESET 0010100110000
--#define AC_ROM_MR0_MIRR 0010001001001
--#define AC_ROM_MR0 0010000110001
--#define AC_ROM_MR1 0000001000100
--#define AC_ROM_MR2 0000000001000
-+#define AC_ROM_MR0_DLL_RESET_MIRR 0010011101000
-+#define AC_ROM_MR0_DLL_RESET 0010101110000
-+#define AC_ROM_MR0_MIRR 0010001101001
-+#define AC_ROM_MR0 0010001110001
-+#define AC_ROM_MR1 0000000000110
-+#define AC_ROM_MR2 0001000011000
- #define AC_ROM_MR3 0000000000000
- #define AFI_CLK_FREQ 401
- #define AFI_RATE_RATIO 1
- #define ARRIAVGZ 0
- #define ARRIAV 0
--#define AVL_CLK_FREQ 67
-+#define AVL_CLK_FREQ 81
- #define BFM_MODE 0
- #define BURST2 0
- #define CALIBRATE_BIT_SLIPS 0
--#define CALIB_LFIFO_OFFSET 7
--#define CALIB_VFIFO_OFFSET 5
-+#define CALIB_LFIFO_OFFSET 11
-+#define CALIB_VFIFO_OFFSET 9
- #define CYCLONEV 1
- #define DDR2 0
- #define DDR3 1
-@@ -89,20 +89,20 @@
- #define RW_MGR_MEM_CHIP_SELECT_WIDTH 1
- #define RW_MGR_MEM_CLK_EN_WIDTH 1
- #define RW_MGR_MEM_CONTROL_WIDTH 1
--#define RW_MGR_MEM_DATA_MASK_WIDTH 5
--#define RW_MGR_MEM_DATA_WIDTH 40
-+#define RW_MGR_MEM_DATA_MASK_WIDTH 4
-+#define RW_MGR_MEM_DATA_WIDTH 32
- #define RW_MGR_MEM_DQ_PER_READ_DQS 8
- #define RW_MGR_MEM_DQ_PER_WRITE_DQS 8
--#define RW_MGR_MEM_IF_READ_DQS_WIDTH 5
--#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 5
-+#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4
-+#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4
- #define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1
- #define RW_MGR_MEM_NUMBER_OF_RANKS 1
- #define RW_MGR_MEM_ODT_WIDTH 1
- #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1
- #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1
- #define RW_MGR_MR0_BL 1
--#define RW_MGR_MR0_CAS_LATENCY 3
--#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 5
-+#define RW_MGR_MR0_CAS_LATENCY 7
-+#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4
- #define RW_MGR_WRITE_TO_DEBUG_READ 1.0
- #define SKEW_CALIBRATION 0
- #define STATIC_FULL_CALIBRATION 1
---
-1.9.0
-
diff --git a/configs/altera_socdk_defconfig b/configs/altera_socdk_defconfig
deleted file mode 100644
index f5a2fc7fd0..0000000000
--- a/configs/altera_socdk_defconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-BR2_arm=y
-BR2_cortex_a9=y
-
-BR2_ARM_ENABLE_VFP=y
-BR2_ARM_ENABLE_NEON=y
-BR2_ARM_FPU_NEON=y
-BR2_ARM_INSTRUCTIONS_THUMB2=y
-
-# Linux headers same as kernel, a 3.13 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y
-
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/altera/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_LINUX_KERNEL_INTREE_DTS_NAME)"
-
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="http://git.rocketboards.org/linux-socfpga.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_socfpga-3.13_14.02.02"
-BR2_LINUX_KERNEL_DEFCONFIG="socfpga"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5_socdk"
-
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_3=y
-
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="socfpga_cyclone5"
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="http://git.rocketboards.org/u-boot-socfpga.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_socfpga_v2013.01.01_14.02.02"
-BR2_TARGET_UBOOT_FORMAT_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin"
diff --git a/configs/altera_sockit_defconfig b/configs/altera_sockit_defconfig
deleted file mode 100644
index 0addbde1e5..0000000000
--- a/configs/altera_sockit_defconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-BR2_arm=y
-BR2_cortex_a9=y
-
-BR2_ARM_ENABLE_VFP=y
-BR2_ARM_ENABLE_NEON=y
-BR2_ARM_FPU_NEON=y
-BR2_ARM_INSTRUCTIONS_THUMB2=y
-
-# Linux headers same as kernel, a 3.13 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y
-
-BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/altera/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_LINUX_KERNEL_INTREE_DTS_NAME)"
-
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="http://git.rocketboards.org/linux-socfpga.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_socfpga-3.13_14.02.02"
-BR2_LINUX_KERNEL_DEFCONFIG="socfpga"
-BR2_LINUX_KERNEL_UIMAGE=y
-BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5_sockit"
-
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_3=y
-
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="socfpga_cyclone5"
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="http://git.rocketboards.org/u-boot-socfpga.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_acds13.0sp1"
-BR2_TARGET_UBOOT_PATCH="board/altera/sockit"
-BR2_TARGET_UBOOT_FORMAT_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin"
--
2.11.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 3/5] telit_evk_pro3_defconfig: remove broken defconfig
2017-03-01 8:30 ` [Buildroot] [PATCH 3/5] telit_evk_pro3_defconfig: remove broken defconfig Arnout Vandecappelle
@ 2017-03-01 16:28 ` Fabio Porcedda
2017-03-01 18:50 ` Arnout Vandecappelle
2017-04-06 10:50 ` Arnout Vandecappelle
0 siblings, 2 replies; 13+ messages in thread
From: Fabio Porcedda @ 2017-03-01 16:28 UTC (permalink / raw)
To: buildroot
2017-03-01 9:30 GMT+01:00 Arnout Vandecappelle (Essensium/Mind)
<arnout@mind.be>:
> This defconfig has been broken due to gcc5 for more than half a year,
> and nobody stepped up to fix it. Remove it, as well as it board
> directory.
Hi Arnout,
sorry for the late response, today I've sent a patch to fix the build
failure for barebox, tomorrow i will send a patch to update the linux
kernel.
Thanks
--
Fabio Porcedda
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 3/5] telit_evk_pro3_defconfig: remove broken defconfig
2017-03-01 16:28 ` Fabio Porcedda
@ 2017-03-01 18:50 ` Arnout Vandecappelle
2017-04-06 10:50 ` Arnout Vandecappelle
1 sibling, 0 replies; 13+ messages in thread
From: Arnout Vandecappelle @ 2017-03-01 18:50 UTC (permalink / raw)
To: buildroot
On 01-03-17 17:28, Fabio Porcedda wrote:
> 2017-03-01 9:30 GMT+01:00 Arnout Vandecappelle (Essensium/Mind)
> <arnout@mind.be>:
>> This defconfig has been broken due to gcc5 for more than half a year,
>> and nobody stepped up to fix it. Remove it, as well as it board
>> directory.
>
> Hi Arnout,
> sorry for the late response, today I've sent a patch to fix the build
> failure for barebox, tomorrow i will send a patch to update the linux
> kernel.
OK, I've marked this patch as superseded in patchwork.
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig
2017-03-01 8:30 [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig Arnout Vandecappelle
` (3 preceding siblings ...)
2017-03-01 8:30 ` [Buildroot] [PATCH 5/5] altera_*_defconfig: remove broken defconfigs Arnout Vandecappelle
@ 2017-03-05 20:57 ` Thomas Petazzoni
4 siblings, 0 replies; 13+ messages in thread
From: Thomas Petazzoni @ 2017-03-05 20:57 UTC (permalink / raw)
To: buildroot
Hello,
On Wed, 1 Mar 2017 09:30:42 +0100, Arnout Vandecappelle
(Essensium/Mind) wrote:
> This defconfig has been broken due to gcc5 for more than half a year,
> and nobody stepped up to fix it. Remove it, as well as the files it
> references. Update the readme to remove references to MinnowBoard.
>
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> ---
> board/minnowboard/grub-minnowboard.cfg | 6 --
> board/minnowboard/linux-3.8.config | 172 ---------------------------------
> board/minnowboard/readme.txt | 10 +-
> configs/minnowboard_defconfig | 32 ------
> 4 files changed, 3 insertions(+), 217 deletions(-)
> delete mode 100644 board/minnowboard/grub-minnowboard.cfg
> delete mode 100644 board/minnowboard/linux-3.8.config
> delete mode 100644 configs/minnowboard_defconfig
Applied to master, thanks.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 2/5] board/minnowboard: remove support for minnowboard
2017-03-01 8:30 ` [Buildroot] [PATCH 2/5] board/minnowboard: remove support for minnowboard Arnout Vandecappelle
@ 2017-03-05 20:57 ` Thomas Petazzoni
0 siblings, 0 replies; 13+ messages in thread
From: Thomas Petazzoni @ 2017-03-05 20:57 UTC (permalink / raw)
To: buildroot
Hello,
On Wed, 1 Mar 2017 09:30:43 +0100, Arnout Vandecappelle
(Essensium/Mind) wrote:
> The scripts used for the minnowboards were generic for MinnowBoard and
> MinnowBoard MAX. Since we removed the original MinnowBoard, this isn't
> necessary anymore.
>
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> ---
> Separate commit because we may not want to do this: it doesn't hurt to
> have this generic mechanism, and if later someone wants to re-add
> MinnowBoard or add support for a new generation of the board, it's
> convenient to still have it around.
> ---
> board/minnowboard/{grub-minnowboard-max.cfg => grub.cfg} | 0
> board/minnowboard/post-build.sh | 4 +---
> configs/minnowboard_max-graphical_defconfig | 1 -
> configs/minnowboard_max_defconfig | 1 -
> 4 files changed, 1 insertion(+), 5 deletions(-)
> rename board/minnowboard/{grub-minnowboard-max.cfg => grub.cfg} (100%)
Applied to master, thanks.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 4/5] via_imx6_vab820_defconfig: remove broken defconfig
2017-03-01 8:30 ` [Buildroot] [PATCH 4/5] via_imx6_vab820_defconfig: " Arnout Vandecappelle
@ 2017-03-05 20:57 ` Thomas Petazzoni
0 siblings, 0 replies; 13+ messages in thread
From: Thomas Petazzoni @ 2017-03-05 20:57 UTC (permalink / raw)
To: buildroot
Hello,
On Wed, 1 Mar 2017 09:30:45 +0100, Arnout Vandecappelle
(Essensium/Mind) wrote:
> This defconfig has been broken due to gcc5 for more than half a year,
> and nobody stepped up to fix it. Remove it, as well as it board
> directory.
>
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> Cc: Gergely Imreh <imrehg@gmail.com>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> ---
> board/via/imx6_vab820/genimage.cfg | 38 ------------
> board/via/imx6_vab820/post-image.sh | 17 -----
> board/via/imx6_vab820/readme.txt | 120 ------------------------------------
> configs/via_imx6_vab820_defconfig | 34 ----------
> 4 files changed, 209 deletions(-)
> delete mode 100644 board/via/imx6_vab820/genimage.cfg
> delete mode 100755 board/via/imx6_vab820/post-image.sh
> delete mode 100644 board/via/imx6_vab820/readme.txt
> delete mode 100644 configs/via_imx6_vab820_defconfig
Applied to master, thanks.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 5/5] altera_*_defconfig: remove broken defconfigs
2017-03-01 8:30 ` [Buildroot] [PATCH 5/5] altera_*_defconfig: remove broken defconfigs Arnout Vandecappelle
@ 2017-03-05 20:57 ` Thomas Petazzoni
0 siblings, 0 replies; 13+ messages in thread
From: Thomas Petazzoni @ 2017-03-05 20:57 UTC (permalink / raw)
To: buildroot
Hello,
On Wed, 1 Mar 2017 09:30:46 +0100, Arnout Vandecappelle
(Essensium/Mind) wrote:
> These defconfigs have been broken due to gcc5 for more than half a year,
> and nobody stepped up to fix it. In addition, the rocketboards git
> repository used by these defconfigs hasn't been reachable for more than
> half a year. Finally, these defconfigs don't even use the
> BR2_TARGET_UBOOT_ALTERA_SOCFPGA_IMAGE_CRC option so they are not a
> great example for this family of targets.
>
> Remove these defconfigs, as well as the board directory. Both are
> removed in a single commit to avoid having an inconsistent readme.
>
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> Cc: Jan Viktorin <viktorin@rehivetech.com>
> Cc: Charles Manning <cdhmanning@gmail.com>
> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
> ---
> board/altera/post-image.sh | 8 -
> board/altera/readme.txt | 165 -----
> .../uboot-sockit-preloader-sample-design.patch | 820 ---------------------
> configs/altera_socdk_defconfig | 33 -
> configs/altera_sockit_defconfig | 37 -
> 5 files changed, 1063 deletions(-)
> delete mode 100755 board/altera/post-image.sh
> delete mode 100644 board/altera/readme.txt
> delete mode 100644 board/altera/sockit/uboot-sockit-preloader-sample-design.patch
> delete mode 100644 configs/altera_socdk_defconfig
> delete mode 100644 configs/altera_sockit_defconfig
Applied to master, thanks.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 3/5] telit_evk_pro3_defconfig: remove broken defconfig
2017-03-01 16:28 ` Fabio Porcedda
2017-03-01 18:50 ` Arnout Vandecappelle
@ 2017-04-06 10:50 ` Arnout Vandecappelle
2017-04-07 18:47 ` Fabio Porcedda
1 sibling, 1 reply; 13+ messages in thread
From: Arnout Vandecappelle @ 2017-04-06 10:50 UTC (permalink / raw)
To: buildroot
Hi Fabio,
On 01-03-17 17:28, Fabio Porcedda wrote:
> 2017-03-01 9:30 GMT+01:00 Arnout Vandecappelle (Essensium/Mind)
> <arnout@mind.be>:
>> This defconfig has been broken due to gcc5 for more than half a year,
>> and nobody stepped up to fix it. Remove it, as well as it board
>> directory.
>
> Hi Arnout,
> sorry for the late response, today I've sent a patch to fix the build
> failure for barebox, tomorrow i will send a patch to update the linux
> kernel.
Any update on that kernel patch? The telit defconfig is still broken...
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] [PATCH 3/5] telit_evk_pro3_defconfig: remove broken defconfig
2017-04-06 10:50 ` Arnout Vandecappelle
@ 2017-04-07 18:47 ` Fabio Porcedda
0 siblings, 0 replies; 13+ messages in thread
From: Fabio Porcedda @ 2017-04-07 18:47 UTC (permalink / raw)
To: buildroot
2017-04-06 12:50 GMT+02:00 Arnout Vandecappelle <arnout@mind.be>:
> Hi Fabio,
>
> On 01-03-17 17:28, Fabio Porcedda wrote:
>> 2017-03-01 9:30 GMT+01:00 Arnout Vandecappelle (Essensium/Mind)
>> <arnout@mind.be>:
>>> This defconfig has been broken due to gcc5 for more than half a year,
>>> and nobody stepped up to fix it. Remove it, as well as it board
>>> directory.
>>
>> Hi Arnout,
>> sorry for the late response, today I've sent a patch to fix the build
>> failure for barebox, tomorrow i will send a patch to update the linux
>> kernel.
>
> Any update on that kernel patch? The telit defconfig is still broken...
Hi Arnout,
I'm sorry for the delay, the next week I will send a patch for the kernel too.
Best regards
--
Fabio Porcedda
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2017-04-07 18:47 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-01 8:30 [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig Arnout Vandecappelle
2017-03-01 8:30 ` [Buildroot] [PATCH 2/5] board/minnowboard: remove support for minnowboard Arnout Vandecappelle
2017-03-05 20:57 ` Thomas Petazzoni
2017-03-01 8:30 ` [Buildroot] [PATCH 3/5] telit_evk_pro3_defconfig: remove broken defconfig Arnout Vandecappelle
2017-03-01 16:28 ` Fabio Porcedda
2017-03-01 18:50 ` Arnout Vandecappelle
2017-04-06 10:50 ` Arnout Vandecappelle
2017-04-07 18:47 ` Fabio Porcedda
2017-03-01 8:30 ` [Buildroot] [PATCH 4/5] via_imx6_vab820_defconfig: " Arnout Vandecappelle
2017-03-05 20:57 ` Thomas Petazzoni
2017-03-01 8:30 ` [Buildroot] [PATCH 5/5] altera_*_defconfig: remove broken defconfigs Arnout Vandecappelle
2017-03-05 20:57 ` Thomas Petazzoni
2017-03-05 20:57 ` [Buildroot] [PATCH 1/5] minnowboard_defconfig: remove broken defconfig Thomas Petazzoni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.