From: Viresh Kumar <viresh.kumar@linaro.org> To: Rafael Wysocki <rjw@rjwysocki.net>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org> Cc: Viresh Kumar <viresh.kumar@linaro.org>, linux-pm@vger.kernel.org, Vincent Guittot <vincent.guittot@linaro.org>, Eduardo Valentin <edubezval@gmail.com>, Zhang Rui <rui.zhang@intel.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, daniel.lezcano@linaro.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 01/10] ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes Date: Fri, 9 Feb 2018 14:28:01 +0530 [thread overview] Message-ID: <f808613a9c7a4f23d3a0c64b6f3d4df1b905b16b.1518166039.git.viresh.kumar@linaro.org> (raw) In-Reply-To: <cover.1518166039.git.viresh.kumar@linaro.org> In-Reply-To: <cover.1518166039.git.viresh.kumar@linaro.org> The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of the kernel currently and the max cooling state of a CPU cooling device is found by referring to the cpufreq table instead. Remove the unused properties from the CPU nodes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- arch/arm/boot/dts/exynos4210.dtsi | 2 -- arch/arm/boot/dts/exynos4412.dtsi | 2 -- arch/arm/boot/dts/exynos5250.dtsi | 2 -- arch/arm/boot/dts/exynos5420-cpus.dtsi | 16 ---------------- arch/arm/boot/dts/exynos5422-cpus.dtsi | 16 ---------------- 5 files changed, 38 deletions(-) diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index cc978cf28267..58ab34a233da 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -49,8 +49,6 @@ 400000 975000 200000 950000 >; - cooling-min-level = <4>; - cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index e4ad2fc0329e..5f5cc12f2075 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -42,8 +42,6 @@ clocks = <&clock CLK_ARM_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; - cooling-min-level = <13>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 56626d1a4235..bb4180ef7885 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -77,8 +77,6 @@ 300000 937500 200000 925000 >; - cooling-min-level = <15>; - cooling-max-level = <9>; #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index 123f0cef658d..a8e449471304 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -30,8 +30,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -43,8 +41,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -56,8 +52,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -69,8 +63,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -83,8 +75,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -96,8 +86,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -109,8 +97,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -122,8 +108,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index c593809c7f08..7c130a00d1a8 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -29,8 +29,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -42,8 +40,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -55,8 +51,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -68,8 +62,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -82,8 +74,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -95,8 +85,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -108,8 +96,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -121,8 +107,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; -- 2.15.0.194.g9af6a3dea062
WARNING: multiple messages have this Message-ID (diff)
From: viresh.kumar@linaro.org (Viresh Kumar) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 01/10] ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes Date: Fri, 9 Feb 2018 14:28:01 +0530 [thread overview] Message-ID: <f808613a9c7a4f23d3a0c64b6f3d4df1b905b16b.1518166039.git.viresh.kumar@linaro.org> (raw) In-Reply-To: <cover.1518166039.git.viresh.kumar@linaro.org> The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of the kernel currently and the max cooling state of a CPU cooling device is found by referring to the cpufreq table instead. Remove the unused properties from the CPU nodes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- arch/arm/boot/dts/exynos4210.dtsi | 2 -- arch/arm/boot/dts/exynos4412.dtsi | 2 -- arch/arm/boot/dts/exynos5250.dtsi | 2 -- arch/arm/boot/dts/exynos5420-cpus.dtsi | 16 ---------------- arch/arm/boot/dts/exynos5422-cpus.dtsi | 16 ---------------- 5 files changed, 38 deletions(-) diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index cc978cf28267..58ab34a233da 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -49,8 +49,6 @@ 400000 975000 200000 950000 >; - cooling-min-level = <4>; - cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index e4ad2fc0329e..5f5cc12f2075 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -42,8 +42,6 @@ clocks = <&clock CLK_ARM_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; - cooling-min-level = <13>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 56626d1a4235..bb4180ef7885 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -77,8 +77,6 @@ 300000 937500 200000 925000 >; - cooling-min-level = <15>; - cooling-max-level = <9>; #cooling-cells = <2>; /* min followed by max */ }; cpu at 1 { diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index 123f0cef658d..a8e449471304 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -30,8 +30,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -43,8 +41,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -56,8 +52,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -69,8 +63,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -83,8 +75,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -96,8 +86,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -109,8 +97,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -122,8 +108,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index c593809c7f08..7c130a00d1a8 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -29,8 +29,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -42,8 +40,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -55,8 +51,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -68,8 +62,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -82,8 +74,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -95,8 +85,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -108,8 +96,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -121,8 +107,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; -- 2.15.0.194.g9af6a3dea062
next prev parent reply other threads:[~2018-02-09 8:58 UTC|newest] Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-02-09 8:58 [PATCH 00/10] thermal: Remove "cooling-{min|max}-level" properties Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar [this message] 2018-02-09 8:58 ` [PATCH 01/10] ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes Viresh Kumar 2018-02-13 18:16 ` Krzysztof Kozlowski 2018-02-13 18:16 ` Krzysztof Kozlowski 2018-02-09 8:58 ` [PATCH 02/10] ARM: dts: omap: " Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-12 17:17 ` Tony Lindgren 2018-02-12 17:17 ` Tony Lindgren 2018-02-12 17:18 ` Tony Lindgren 2018-02-12 17:18 ` Tony Lindgren 2018-02-09 8:58 ` [PATCH 03/10] ARM: dts: mt7623: " Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-18 23:26 ` Rob Herring 2018-02-18 23:26 ` Rob Herring 2018-02-18 23:26 ` Rob Herring 2018-02-09 8:58 ` [PATCH 04/10] ARM: dts: sun[4-7]i: " Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-13 9:13 ` Maxime Ripard 2018-02-13 9:13 ` Maxime Ripard 2018-02-13 9:18 ` Chen-Yu Tsai 2018-02-13 9:18 ` Chen-Yu Tsai 2018-02-14 3:12 ` Viresh Kumar 2018-02-14 3:12 ` Viresh Kumar 2018-02-09 8:58 ` [PATCH 05/10] ARM64: dts: hi6220: " Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-03-02 16:03 ` Wei Xu 2018-03-02 16:03 ` Wei Xu 2018-03-02 16:03 ` Wei Xu 2018-02-09 8:58 ` [PATCH 06/10] ARM64: dts: meson: " Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 9:03 ` Neil Armstrong 2018-02-09 9:03 ` Neil Armstrong 2018-02-09 9:03 ` Neil Armstrong 2018-03-12 4:32 ` Viresh Kumar 2018-03-12 4:32 ` Viresh Kumar 2018-03-12 4:32 ` Viresh Kumar 2018-03-20 1:37 ` Viresh Kumar 2018-03-20 1:37 ` Viresh Kumar 2018-03-20 1:37 ` Viresh Kumar 2018-03-27 12:29 ` Arnd Bergmann 2018-03-27 12:29 ` Arnd Bergmann 2018-03-27 12:29 ` Arnd Bergmann 2018-02-09 8:58 ` [PATCH 07/10] ARM: dts: gemini: Remove "cooling-{min|max}-level" for gpio-fan node Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-03-12 4:35 ` Viresh Kumar 2018-03-12 4:35 ` Viresh Kumar 2018-03-20 1:43 ` Viresh Kumar 2018-03-20 1:43 ` Viresh Kumar 2018-03-20 3:10 ` Linus Walleij 2018-03-20 3:10 ` Linus Walleij 2018-03-27 12:26 ` Arnd Bergmann 2018-03-27 12:26 ` Arnd Bergmann 2018-03-27 12:29 ` Linus Walleij 2018-03-27 12:29 ` Linus Walleij 2018-02-09 8:58 ` [PATCH 08/10] ARM64: dts: meson: " Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 9:04 ` Neil Armstrong 2018-02-09 9:04 ` Neil Armstrong 2018-02-09 9:04 ` Neil Armstrong 2018-02-09 8:58 ` [PATCH 09/10] dt-bindings: cpufreq-dt: Remove "cooling-{min|max}-level" properties Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-18 23:26 ` Rob Herring 2018-02-18 23:26 ` Rob Herring 2018-02-18 23:26 ` Rob Herring 2018-02-09 8:58 ` [PATCH 10/10] dt-bindings: thermal: " Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-09 8:58 ` Viresh Kumar 2018-02-18 23:29 ` Rob Herring 2018-02-18 23:29 ` Rob Herring 2018-02-18 23:29 ` Rob Herring 2018-02-19 3:43 ` Viresh Kumar 2018-02-19 3:43 ` Viresh Kumar 2018-02-19 3:43 ` Viresh Kumar 2018-02-19 18:01 ` Rob Herring 2018-02-19 18:01 ` Rob Herring 2018-02-19 18:01 ` Rob Herring 2018-03-12 4:38 ` Viresh Kumar 2018-03-12 4:38 ` Viresh Kumar 2018-03-20 12:49 ` Zhang Rui 2018-03-20 12:49 ` Zhang Rui 2018-03-27 13:46 ` Eduardo Valentin 2018-03-27 13:46 ` Eduardo Valentin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=f808613a9c7a4f23d3a0c64b6f3d4df1b905b16b.1518166039.git.viresh.kumar@linaro.org \ --to=viresh.kumar@linaro.org \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=edubezval@gmail.com \ --cc=kgene@kernel.org \ --cc=krzk@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=rjw@rjwysocki.net \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ --cc=vincent.guittot@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.