* [PATCH v5] dt-bindings: misc: add schema for USB hub on Kirin devices
@ 2021-09-28 7:40 Mauro Carvalho Chehab
2021-10-19 6:10 ` Mauro Carvalho Chehab
2021-10-26 1:06 ` Wei Xu
0 siblings, 2 replies; 3+ messages in thread
From: Mauro Carvalho Chehab @ 2021-09-28 7:40 UTC (permalink / raw)
To: Rob Herring
Cc: linuxarm, mauro.chehab, Yu Chen, John Stultz, Rob Herring,
devicetree, linux-kernel, Mauro Carvalho Chehab
From: Yu Chen <chenyu56@huawei.com>
This patch adds binding documentation to support USB HUB and
USB data role switch of HiSilicon HiKey960 and HiKey970 boards.
[mchehab: updated OF schema and added HiKey970 example]
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../bindings/misc/hisilicon,hikey-usb.yaml | 87 +++++++++++++++++++
1 file changed, 87 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
diff --git a/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
new file mode 100644
index 000000000000..761ab686121a
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/hisilicon,hikey-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiKey960/970 onboard USB GPIO Hub
+
+maintainers:
+ - John Stultz <john.stultz@linaro.org>
+
+description: |
+ Supports the onboard USB GPIO hubs found on HiKey960/970.
+ Such hubs require a power supply for the USB I/O. Depending on the
+ exact hub model, after USB I/O is powered up, a reset should be needed.
+
+ It also acts as a role-switch intermediary to detect the state of
+ the USB-C port, to switch the hub into dual-role USB-C or host mode,
+ which enables and powers up the onboard USB-A host ports.
+
+ Schematics about such hubs can be found here:
+ https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf
+ https://www.96boards.org/documentation/consumer/hikey/hikey970/hardware-docs/files/hikey970-schematics.pdf
+
+properties:
+ compatible:
+ enum:
+ - hisilicon,usbhub
+
+ typec-vbus-gpios:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: phandle to the typec-vbus gpio
+
+ otg-switch-gpios:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: phandle to the otg-switch gpio
+
+ hub-reset-en-gpios:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: phandle to the hub reset gpio
+
+ usb-role-switch:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Support role switch.
+
+ hub-vdd-supply:
+ description: regulator for hub power
+
+ port:
+ description: |
+ describe hadware connections between USB endpoints.
+ Two ports are supported: the first being the endpoint that will
+ be notified by this driver, and the second being the endpoint
+ that notifies this driver of a role switch.
+
+required:
+ - compatible
+ - hub-vdd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ usb-hub {
+ compatible = "hisilicon,usbhub";
+ typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+ otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+ hub-reset-en-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ hub-vdd-supply = <&usb_hub_vdd>;
+ usb-role-switch;
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ usb_ep0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dwc3_role_switch>;
+ };
+ usb_ep1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&rt1711h_ep>;
+ };
+ };
+ };
--
2.31.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v5] dt-bindings: misc: add schema for USB hub on Kirin devices
2021-09-28 7:40 [PATCH v5] dt-bindings: misc: add schema for USB hub on Kirin devices Mauro Carvalho Chehab
@ 2021-10-19 6:10 ` Mauro Carvalho Chehab
2021-10-26 1:06 ` Wei Xu
1 sibling, 0 replies; 3+ messages in thread
From: Mauro Carvalho Chehab @ 2021-10-19 6:10 UTC (permalink / raw)
To: Rob Herring, Rob Herring
Cc: linuxarm, mauro.chehab, Yu Chen, John Stultz, devicetree, linux-kernel
Hi Rob,
Em Tue, 28 Sep 2021 09:40:06 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> escreveu:
> From: Yu Chen <chenyu56@huawei.com>
>
> This patch adds binding documentation to support USB HUB and
> USB data role switch of HiSilicon HiKey960 and HiKey970 boards.
>
> [mchehab: updated OF schema and added HiKey970 example]
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Could you please review and apply this patch on your tree? It is the
only missing piece for USB to start working on HiKey 960/970.
> ---
> .../bindings/misc/hisilicon,hikey-usb.yaml | 87 +++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
>
> diff --git a/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
> new file mode 100644
> index 000000000000..761ab686121a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 Linaro Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/misc/hisilicon,hikey-usb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiKey960/970 onboard USB GPIO Hub
> +
> +maintainers:
> + - John Stultz <john.stultz@linaro.org>
> +
> +description: |
> + Supports the onboard USB GPIO hubs found on HiKey960/970.
> + Such hubs require a power supply for the USB I/O. Depending on the
> + exact hub model, after USB I/O is powered up, a reset should be needed.
> +
> + It also acts as a role-switch intermediary to detect the state of
> + the USB-C port, to switch the hub into dual-role USB-C or host mode,
> + which enables and powers up the onboard USB-A host ports.
> +
> + Schematics about such hubs can be found here:
> + https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf
> + https://www.96boards.org/documentation/consumer/hikey/hikey970/hardware-docs/files/hikey970-schematics.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - hisilicon,usbhub
> +
> + typec-vbus-gpios:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: phandle to the typec-vbus gpio
> +
> + otg-switch-gpios:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: phandle to the otg-switch gpio
> +
> + hub-reset-en-gpios:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: phandle to the hub reset gpio
> +
> + usb-role-switch:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: Support role switch.
> +
> + hub-vdd-supply:
> + description: regulator for hub power
> +
> + port:
> + description: |
> + describe hadware connections between USB endpoints.
> + Two ports are supported: the first being the endpoint that will
> + be notified by this driver, and the second being the endpoint
> + that notifies this driver of a role switch.
> +
> +required:
> + - compatible
> + - hub-vdd-supply
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + usb-hub {
> + compatible = "hisilicon,usbhub";
> + typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
> + otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
> + hub-reset-en-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> + hub-vdd-supply = <&usb_hub_vdd>;
> + usb-role-switch;
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + usb_ep0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&dwc3_role_switch>;
> + };
> + usb_ep1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&rt1711h_ep>;
> + };
> + };
> + };
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v5] dt-bindings: misc: add schema for USB hub on Kirin devices
2021-09-28 7:40 [PATCH v5] dt-bindings: misc: add schema for USB hub on Kirin devices Mauro Carvalho Chehab
2021-10-19 6:10 ` Mauro Carvalho Chehab
@ 2021-10-26 1:06 ` Wei Xu
1 sibling, 0 replies; 3+ messages in thread
From: Wei Xu @ 2021-10-26 1:06 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring
Cc: linuxarm, mauro.chehab, Yu Chen, John Stultz, Rob Herring,
devicetree, linux-kernel, xuwei5
Hi Mauro,
On 2021/9/28 15:40, Mauro Carvalho Chehab wrote:
> From: Yu Chen <chenyu56@huawei.com>
>
> This patch adds binding documentation to support USB HUB and
> USB data role switch of HiSilicon HiKey960 and HiKey970 boards.
>
> [mchehab: updated OF schema and added HiKey970 example]
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Thanks!
Best Regards,
Wei
> ---
> .../bindings/misc/hisilicon,hikey-usb.yaml | 87 +++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
>
> diff --git a/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
> new file mode 100644
> index 000000000000..761ab686121a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 Linaro Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/misc/hisilicon,hikey-usb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiKey960/970 onboard USB GPIO Hub
> +
> +maintainers:
> + - John Stultz <john.stultz@linaro.org>
> +
> +description: |
> + Supports the onboard USB GPIO hubs found on HiKey960/970.
> + Such hubs require a power supply for the USB I/O. Depending on the
> + exact hub model, after USB I/O is powered up, a reset should be needed.
> +
> + It also acts as a role-switch intermediary to detect the state of
> + the USB-C port, to switch the hub into dual-role USB-C or host mode,
> + which enables and powers up the onboard USB-A host ports.
> +
> + Schematics about such hubs can be found here:
> + https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf
> + https://www.96boards.org/documentation/consumer/hikey/hikey970/hardware-docs/files/hikey970-schematics.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - hisilicon,usbhub
> +
> + typec-vbus-gpios:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: phandle to the typec-vbus gpio
> +
> + otg-switch-gpios:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: phandle to the otg-switch gpio
> +
> + hub-reset-en-gpios:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: phandle to the hub reset gpio
> +
> + usb-role-switch:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: Support role switch.
> +
> + hub-vdd-supply:
> + description: regulator for hub power
> +
> + port:
> + description: |
> + describe hadware connections between USB endpoints.
> + Two ports are supported: the first being the endpoint that will
> + be notified by this driver, and the second being the endpoint
> + that notifies this driver of a role switch.
> +
> +required:
> + - compatible
> + - hub-vdd-supply
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + usb-hub {
> + compatible = "hisilicon,usbhub";
> + typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
> + otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
> + hub-reset-en-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> + hub-vdd-supply = <&usb_hub_vdd>;
> + usb-role-switch;
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + usb_ep0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&dwc3_role_switch>;
> + };
> + usb_ep1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&rt1711h_ep>;
> + };
> + };
> + };
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-10-26 1:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-28 7:40 [PATCH v5] dt-bindings: misc: add schema for USB hub on Kirin devices Mauro Carvalho Chehab
2021-10-19 6:10 ` Mauro Carvalho Chehab
2021-10-26 1:06 ` Wei Xu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.