Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

>On Thu, 2009-06-04 at 10:07 -0400, Jon Smirl wrote:
>On Thu, Jun 4, 2009 at 9:31 AM, Subrata Modak
> <subrata@linux.vnet.ibm.com> wrote:
> > CC      drivers/usb/host/ohci-hcd.o
> > In file included from drivers/usb/host/ohci-hcd.c:1060:
> > drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selected for ppc-of-ohci"
> > make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
> > make[2]: *** [drivers/usb/host] Error 2
> > make[1]: *** [drivers/usb] Error 2
> > make: *** [drivers] Error 2
> >
> > I reported this earlier, and there were some discussions:
> > http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d5572d3d225
> 
> Proposed patch by Arnd should fix this. It has not been merged.
> http://lkml.org/lkml/2009/4/22/49

Correct, it fixes the issue. However, since few changes might have gone
to the Kconfig, the patch does not apply cleanly. Below is the patch, just
a retake of the earlier one, but on the latest code. 

David,

Can you please pickup the following patch ?

Signed-off-by: Arnd Bergmann <arnd@arndb.de>,
Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
---

--- linux-2.6.30-rc8/drivers/usb/host/Kconfig.orig	2009-06-05 10:31:30.000000000 -0500
+++ linux-2.6.30-rc8/drivers/usb/host/Kconfig	2009-06-05 10:37:53.000000000 -0500
@@ -181,26 +181,26 @@ config USB_OHCI_HCD_PPC_SOC
 	  Enables support for the USB controller on the MPC52xx or
 	  STB03xxx processor chip.  If unsure, say Y.
 
-config USB_OHCI_HCD_PPC_OF
-	bool "OHCI support for PPC USB controller on OF platform bus"
-	depends on USB_OHCI_HCD && PPC_OF
-	default y
-	---help---
-	  Enables support for the USB controller PowerPC present on the
-	  OpenFirmware platform bus.
-
 config USB_OHCI_HCD_PPC_OF_BE
-	bool "Support big endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default y
+	bool "OHCI support for OF platform bus (big endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_BIG_ENDIAN_DESC
 	select USB_OHCI_BIG_ENDIAN_MMIO
+	---help---
+	Enables support for big-endian USB controllers present on the
+	OpenFirmware platform bus.
 
 config USB_OHCI_HCD_PPC_OF_LE
-	bool "Support little endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default n
+	bool "OHCI support for OF platform bus (little endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_LITTLE_ENDIAN
+	---help---
+	Enables support for little-endian USB controllers present on the
+	OpenFirmware platform bus.
+
+	config USB_OHCI_HCD_PPC_OF
+	bool
+	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
 
 config USB_OHCI_HCD_PCI
 	bool "OHCI support for PCI-bus USB controllers"

---
Regards--
Subrata
>

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

>On Thu, 2009-06-04 at 10:07 -0400, Jon Smirl wrote:
>On Thu, Jun 4, 2009 at 9:31 AM, Subrata Modak
> <subrata@linux.vnet.ibm.com> wrote:
> > CC      drivers/usb/host/ohci-hcd.o
> > In file included from drivers/usb/host/ohci-hcd.c:1060:
> > drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selected for ppc-of-ohci"
> > make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
> > make[2]: *** [drivers/usb/host] Error 2
> > make[1]: *** [drivers/usb] Error 2
> > make: *** [drivers] Error 2
> >
> > I reported this earlier, and there were some discussions:
> > http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d5572d3d225
> 
> Proposed patch by Arnd should fix this. It has not been merged.
> http://lkml.org/lkml/2009/4/22/49

Correct, it fixes the issue. However, since few changes might have gone
to the Kconfig, the patch does not apply cleanly. Below is the patch, just
a retake of the earlier one, but on the latest code. 

David,

Can you please pickup the following patch ?

Signed-off-by: Arnd Bergmann <arnd@arndb.de>,
Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
---

--- linux-2.6.30-rc8/drivers/usb/host/Kconfig.orig	2009-06-05 10:31:30.000000000 -0500
+++ linux-2.6.30-rc8/drivers/usb/host/Kconfig	2009-06-05 10:37:53.000000000 -0500
@@ -181,26 +181,26 @@ config USB_OHCI_HCD_PPC_SOC
 	  Enables support for the USB controller on the MPC52xx or
 	  STB03xxx processor chip.  If unsure, say Y.
 
-config USB_OHCI_HCD_PPC_OF
-	bool "OHCI support for PPC USB controller on OF platform bus"
-	depends on USB_OHCI_HCD && PPC_OF
-	default y
-	---help---
-	  Enables support for the USB controller PowerPC present on the
-	  OpenFirmware platform bus.
-
 config USB_OHCI_HCD_PPC_OF_BE
-	bool "Support big endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default y
+	bool "OHCI support for OF platform bus (big endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_BIG_ENDIAN_DESC
 	select USB_OHCI_BIG_ENDIAN_MMIO
+	---help---
+	Enables support for big-endian USB controllers present on the
+	OpenFirmware platform bus.
 
 config USB_OHCI_HCD_PPC_OF_LE
-	bool "Support little endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default n
+	bool "OHCI support for OF platform bus (little endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_LITTLE_ENDIAN
+	---help---
+	Enables support for little-endian USB controllers present on the
+	OpenFirmware platform bus.
+
+	config USB_OHCI_HCD_PPC_OF
+	bool
+	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
 
 config USB_OHCI_HCD_PCI
 	bool "OHCI support for PCI-bus USB controllers"

---
Regards--
Subrata
>

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Fri, 2009-06-05 at 13:26 -0500, Subrata Modak wrote:
> >On Thu, 2009-06-04 at 10:07 -0400, Jon Smirl wrote:
> >On Thu, Jun 4, 2009 at 9:31 AM, Subrata Modak
> > <subrata@linux.vnet.ibm.com> wrote:
> > > CC      drivers/usb/host/ohci-hcd.o
> > > In file included from drivers/usb/host/ohci-hcd.c:1060:
> > > drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selected for ppc-of-ohci"
> > > make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
> > > make[2]: *** [drivers/usb/host] Error 2
> > > make[1]: *** [drivers/usb] Error 2
> > > make: *** [drivers] Error 2
> > >
> > > I reported this earlier, and there were some discussions:
> > > http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d5572d3d225
> > 
> > Proposed patch by Arnd should fix this. It has not been merged.
> > http://lkml.org/lkml/2009/4/22/49
> 
> Correct, it fixes the issue. However, since few changes might have gone
> to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> a retake of the earlier one, but on the latest code. 
> 
> David,
> 
> Can you please pickup the following patch ?

David,

Is it you who will be merging this patch. Or, do i need to send it to
somebody else ?

Regards--
Subrata

> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>,
> Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
> ---
> 
> --- linux-2.6.30-rc8/drivers/usb/host/Kconfig.orig	2009-06-05 10:31:30.000000000 -0500
> +++ linux-2.6.30-rc8/drivers/usb/host/Kconfig	2009-06-05 10:37:53.000000000 -0500
> @@ -181,26 +181,26 @@ config USB_OHCI_HCD_PPC_SOC
>  	  Enables support for the USB controller on the MPC52xx or
>  	  STB03xxx processor chip.  If unsure, say Y.
> 
> -config USB_OHCI_HCD_PPC_OF
> -	bool "OHCI support for PPC USB controller on OF platform bus"
> -	depends on USB_OHCI_HCD && PPC_OF
> -	default y
> -	---help---
> -	  Enables support for the USB controller PowerPC present on the
> -	  OpenFirmware platform bus.
> -
>  config USB_OHCI_HCD_PPC_OF_BE
> -	bool "Support big endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default y
> +	bool "OHCI support for OF platform bus (big endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_BIG_ENDIAN_DESC
>  	select USB_OHCI_BIG_ENDIAN_MMIO
> +	---help---
> +	Enables support for big-endian USB controllers present on the
> +	OpenFirmware platform bus.
> 
>  config USB_OHCI_HCD_PPC_OF_LE
> -	bool "Support little endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default n
> +	bool "OHCI support for OF platform bus (little endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_LITTLE_ENDIAN
> +	---help---
> +	Enables support for little-endian USB controllers present on the
> +	OpenFirmware platform bus.
> +
> +	config USB_OHCI_HCD_PPC_OF
> +	bool
> +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> 
>  config USB_OHCI_HCD_PCI
>  	bool "OHCI support for PCI-bus USB controllers"
> 
> ---
> Regards--
> Subrata
> >

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Fri, 2009-06-05 at 13:26 -0500, Subrata Modak wrote:
> >On Thu, 2009-06-04 at 10:07 -0400, Jon Smirl wrote:
> >On Thu, Jun 4, 2009 at 9:31 AM, Subrata Modak
> > <subrata-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> wrote:
> > > CC      drivers/usb/host/ohci-hcd.o
> > > In file included from drivers/usb/host/ohci-hcd.c:1060:
> > > drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selected for ppc-of-ohci"
> > > make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
> > > make[2]: *** [drivers/usb/host] Error 2
> > > make[1]: *** [drivers/usb] Error 2
> > > make: *** [drivers] Error 2
> > >
> > > I reported this earlier, and there were some discussions:
> > > http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d5572d3d225
> > 
> > Proposed patch by Arnd should fix this. It has not been merged.
> > http://lkml.org/lkml/2009/4/22/49
> 
> Correct, it fixes the issue. However, since few changes might have gone
> to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> a retake of the earlier one, but on the latest code. 
> 
> David,
> 
> Can you please pickup the following patch ?

David,

Is it you who will be merging this patch. Or, do i need to send it to
somebody else ?

Regards--
Subrata

> 
> Signed-off-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
> Resent-by: Subrata Modak <subrata-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
> ---
> 
> --- linux-2.6.30-rc8/drivers/usb/host/Kconfig.orig	2009-06-05 10:31:30.000000000 -0500
> +++ linux-2.6.30-rc8/drivers/usb/host/Kconfig	2009-06-05 10:37:53.000000000 -0500
> @@ -181,26 +181,26 @@ config USB_OHCI_HCD_PPC_SOC
>  	  Enables support for the USB controller on the MPC52xx or
>  	  STB03xxx processor chip.  If unsure, say Y.
> 
> -config USB_OHCI_HCD_PPC_OF
> -	bool "OHCI support for PPC USB controller on OF platform bus"
> -	depends on USB_OHCI_HCD && PPC_OF
> -	default y
> -	---help---
> -	  Enables support for the USB controller PowerPC present on the
> -	  OpenFirmware platform bus.
> -
>  config USB_OHCI_HCD_PPC_OF_BE
> -	bool "Support big endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default y
> +	bool "OHCI support for OF platform bus (big endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_BIG_ENDIAN_DESC
>  	select USB_OHCI_BIG_ENDIAN_MMIO
> +	---help---
> +	Enables support for big-endian USB controllers present on the
> +	OpenFirmware platform bus.
> 
>  config USB_OHCI_HCD_PPC_OF_LE
> -	bool "Support little endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default n
> +	bool "OHCI support for OF platform bus (little endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_LITTLE_ENDIAN
> +	---help---
> +	Enables support for little-endian USB controllers present on the
> +	OpenFirmware platform bus.
> +
> +	config USB_OHCI_HCD_PPC_OF
> +	bool
> +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> 
>  config USB_OHCI_HCD_PCI
>  	bool "OHCI support for PCI-bus USB controllers"
> 
> ---
> Regards--
> Subrata
> >

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Fri, 2009-06-05 at 13:26 -0500, Subrata Modak wrote:
> >On Thu, 2009-06-04 at 10:07 -0400, Jon Smirl wrote:
> >On Thu, Jun 4, 2009 at 9:31 AM, Subrata Modak
> > <subrata@linux.vnet.ibm.com> wrote:
> > > CC      drivers/usb/host/ohci-hcd.o
> > > In file included from drivers/usb/host/ohci-hcd.c:1060:
> > > drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selected for ppc-of-ohci"
> > > make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
> > > make[2]: *** [drivers/usb/host] Error 2
> > > make[1]: *** [drivers/usb] Error 2
> > > make: *** [drivers] Error 2
> > >
> > > I reported this earlier, and there were some discussions:
> > > http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d5572d3d225
> > 
> > Proposed patch by Arnd should fix this. It has not been merged.
> > http://lkml.org/lkml/2009/4/22/49
> 
> Correct, it fixes the issue. However, since few changes might have gone
> to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> a retake of the earlier one, but on the latest code. 
> 
> David,
> 
> Can you please pickup the following patch ?

David,

Is it you who will be merging this patch. Or, do i need to send it to
somebody else ?

Regards--
Subrata

> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>,
> Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
> ---
> 
> --- linux-2.6.30-rc8/drivers/usb/host/Kconfig.orig	2009-06-05 10:31:30.000000000 -0500
> +++ linux-2.6.30-rc8/drivers/usb/host/Kconfig	2009-06-05 10:37:53.000000000 -0500
> @@ -181,26 +181,26 @@ config USB_OHCI_HCD_PPC_SOC
>  	  Enables support for the USB controller on the MPC52xx or
>  	  STB03xxx processor chip.  If unsure, say Y.
> 
> -config USB_OHCI_HCD_PPC_OF
> -	bool "OHCI support for PPC USB controller on OF platform bus"
> -	depends on USB_OHCI_HCD && PPC_OF
> -	default y
> -	---help---
> -	  Enables support for the USB controller PowerPC present on the
> -	  OpenFirmware platform bus.
> -
>  config USB_OHCI_HCD_PPC_OF_BE
> -	bool "Support big endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default y
> +	bool "OHCI support for OF platform bus (big endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_BIG_ENDIAN_DESC
>  	select USB_OHCI_BIG_ENDIAN_MMIO
> +	---help---
> +	Enables support for big-endian USB controllers present on the
> +	OpenFirmware platform bus.
> 
>  config USB_OHCI_HCD_PPC_OF_LE
> -	bool "Support little endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default n
> +	bool "OHCI support for OF platform bus (little endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_LITTLE_ENDIAN
> +	---help---
> +	Enables support for little-endian USB controllers present on the
> +	OpenFirmware platform bus.
> +
> +	config USB_OHCI_HCD_PPC_OF
> +	bool
> +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> 
>  config USB_OHCI_HCD_PCI
>  	bool "OHCI support for PCI-bus USB controllers"
> 
> ---
> Regards--
> Subrata
> >

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[David Brownell]

On Friday 05 June 2009, Subrata Modak wrote:
> Correct, it fixes the issue. However, since few changes might have gone
> to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> a retake of the earlier one, but on the latest code. 

And it got mangled a bit along the way.  Plus, the original one
goofed up Kconfig dependency displays ... both issues fixed in
this version, against current mainline GIT.

If someone can verify all four PPC/OF/OHCI configs build on
on PPC64, I'm OK with it.

- Dave


========== CUT HERE
From: Arnd Bergmann <arnd@arndb.de>
Subject: fix build failure for PPC64 randconfig [usb/ohci]

We could just make the USB_OHCI_HCD_PPC_OF option implicit
and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
and USB_OHCI_HCD_PPC_OF_LE are set.

[ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
 drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
 	  Enables support for the USB controller on the MPC52xx or
 	  STB03xxx processor chip.  If unsure, say Y.
 
-config USB_OHCI_HCD_PPC_OF
-	bool "OHCI support for PPC USB controller on OF platform bus"
-	depends on USB_OHCI_HCD && PPC_OF
-	default y
-	---help---
-	  Enables support for the USB controller PowerPC present on the
-	  OpenFirmware platform bus.
-
 config USB_OHCI_HCD_PPC_OF_BE
-	bool "Support big endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default y
+	bool "OHCI support for OF platform bus (big endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_BIG_ENDIAN_DESC
 	select USB_OHCI_BIG_ENDIAN_MMIO
+	---help---
+	  Enables support for big-endian USB controllers present on the
+	  OpenFirmware platform bus.
 
 config USB_OHCI_HCD_PPC_OF_LE
-	bool "Support little endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default n
+	bool "OHCI support for OF platform bus (little endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_LITTLE_ENDIAN
+	---help---
+	  Enables support for little-endian USB controllers present on the
+	  OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+	bool
+	depends on USB_OHCI_HCD && PPC_OF
+	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
 
 config USB_OHCI_HCD_PCI
 	bool "OHCI support for PCI-bus USB controllers"

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[David Brownell]

On Friday 05 June 2009, Subrata Modak wrote:
> Correct, it fixes the issue. However, since few changes might have gone
> to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> a retake of the earlier one, but on the latest code. 

And it got mangled a bit along the way.  Plus, the original one
goofed up Kconfig dependency displays ... both issues fixed in
this version, against current mainline GIT.

If someone can verify all four PPC/OF/OHCI configs build on
on PPC64, I'm OK with it.

- Dave


========== CUT HERE
From: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Subject: fix build failure for PPC64 randconfig [usb/ohci]

We could just make the USB_OHCI_HCD_PPC_OF option implicit
and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
and USB_OHCI_HCD_PPC_OF_LE are set.

[ dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org: fix patch manglation and dependencies ]

Signed-off-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Resent-by: Subrata Modak <subrata-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
---
 drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
 	  Enables support for the USB controller on the MPC52xx or
 	  STB03xxx processor chip.  If unsure, say Y.
 
-config USB_OHCI_HCD_PPC_OF
-	bool "OHCI support for PPC USB controller on OF platform bus"
-	depends on USB_OHCI_HCD && PPC_OF
-	default y
-	---help---
-	  Enables support for the USB controller PowerPC present on the
-	  OpenFirmware platform bus.
-
 config USB_OHCI_HCD_PPC_OF_BE
-	bool "Support big endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default y
+	bool "OHCI support for OF platform bus (big endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_BIG_ENDIAN_DESC
 	select USB_OHCI_BIG_ENDIAN_MMIO
+	---help---
+	  Enables support for big-endian USB controllers present on the
+	  OpenFirmware platform bus.
 
 config USB_OHCI_HCD_PPC_OF_LE
-	bool "Support little endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default n
+	bool "OHCI support for OF platform bus (little endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_LITTLE_ENDIAN
+	---help---
+	  Enables support for little-endian USB controllers present on the
+	  OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+	bool
+	depends on USB_OHCI_HCD && PPC_OF
+	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
 
 config USB_OHCI_HCD_PCI
 	bool "OHCI support for PCI-bus USB controllers"

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[David Brownell]

On Friday 05 June 2009, Subrata Modak wrote:
> Correct, it fixes the issue. However, since few changes might have gone
> to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> a retake of the earlier one, but on the latest code. 

And it got mangled a bit along the way.  Plus, the original one
goofed up Kconfig dependency displays ... both issues fixed in
this version, against current mainline GIT.

If someone can verify all four PPC/OF/OHCI configs build on
on PPC64, I'm OK with it.

- Dave


========== CUT HERE
From: Arnd Bergmann <arnd@arndb.de>
Subject: fix build failure for PPC64 randconfig [usb/ohci]

We could just make the USB_OHCI_HCD_PPC_OF option implicit
and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
and USB_OHCI_HCD_PPC_OF_LE are set.

[ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
 drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
 	  Enables support for the USB controller on the MPC52xx or
 	  STB03xxx processor chip.  If unsure, say Y.
 
-config USB_OHCI_HCD_PPC_OF
-	bool "OHCI support for PPC USB controller on OF platform bus"
-	depends on USB_OHCI_HCD && PPC_OF
-	default y
-	---help---
-	  Enables support for the USB controller PowerPC present on the
-	  OpenFirmware platform bus.
-
 config USB_OHCI_HCD_PPC_OF_BE
-	bool "Support big endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default y
+	bool "OHCI support for OF platform bus (big endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_BIG_ENDIAN_DESC
 	select USB_OHCI_BIG_ENDIAN_MMIO
+	---help---
+	  Enables support for big-endian USB controllers present on the
+	  OpenFirmware platform bus.
 
 config USB_OHCI_HCD_PPC_OF_LE
-	bool "Support little endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default n
+	bool "OHCI support for OF platform bus (little endian)"
+	depends on USB_OHCI_HCD && PPC_OF
 	select USB_OHCI_LITTLE_ENDIAN
+	---help---
+	  Enables support for little-endian USB controllers present on the
+	  OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+	bool
+	depends on USB_OHCI_HCD && PPC_OF
+	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
 
 config USB_OHCI_HCD_PCI
 	bool "OHCI support for PCI-bus USB controllers"

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> On Friday 05 June 2009, Subrata Modak wrote:
> > Correct, it fixes the issue. However, since few changes might have gone
> > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > a retake of the earlier one, but on the latest code. 
> 
> And it got mangled a bit along the way.  Plus, the original one
> goofed up Kconfig dependency displays ... both issues fixed in
> this version, against current mainline GIT.
> 
> If someone can verify all four PPC/OF/OHCI configs build on
> on PPC64, I'm OK with it.
> 
> - Dave

Dave,

Sorry for being late. The patch fixes the issue on the latest git for
PPC64. Infact, the whole drivers/usb/host/ builds just fine:

linux-2.6 # make drivers/usb/host/
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-powerpc
  CALL    scripts/checksyscalls.sh
  CC      drivers/usb/host/ohci-hcd.o
  CC      drivers/usb/host/pci-quirks.o
  CC      drivers/usb/host/uhci-hcd.o
  LD      drivers/usb/host/built-in.o
  CC [M]  drivers/usb/host/isp116x-hcd.o
  CC [M]  drivers/usb/host/u132-hcd.o

You can check in the patch now.

Regards--
Subrata

> 
> 
> ========== CUT HERE
> From: Arnd Bergmann <arnd@arndb.de>
> Subject: fix build failure for PPC64 randconfig [usb/ohci]
> 
> We could just make the USB_OHCI_HCD_PPC_OF option implicit
> and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> and USB_OHCI_HCD_PPC_OF_LE are set.
> 
> [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> ---
>  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
>  1 file changed, 15 insertions(+), 14 deletions(-)
> 
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
>  	  Enables support for the USB controller on the MPC52xx or
>  	  STB03xxx processor chip.  If unsure, say Y.
> 
> -config USB_OHCI_HCD_PPC_OF
> -	bool "OHCI support for PPC USB controller on OF platform bus"
> -	depends on USB_OHCI_HCD && PPC_OF
> -	default y
> -	---help---
> -	  Enables support for the USB controller PowerPC present on the
> -	  OpenFirmware platform bus.
> -
>  config USB_OHCI_HCD_PPC_OF_BE
> -	bool "Support big endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default y
> +	bool "OHCI support for OF platform bus (big endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_BIG_ENDIAN_DESC
>  	select USB_OHCI_BIG_ENDIAN_MMIO
> +	---help---
> +	  Enables support for big-endian USB controllers present on the
> +	  OpenFirmware platform bus.
> 
>  config USB_OHCI_HCD_PPC_OF_LE
> -	bool "Support little endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default n
> +	bool "OHCI support for OF platform bus (little endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_LITTLE_ENDIAN
> +	---help---
> +	  Enables support for little-endian USB controllers present on the
> +	  OpenFirmware platform bus.
> +
> +config USB_OHCI_HCD_PPC_OF
> +	bool
> +	depends on USB_OHCI_HCD && PPC_OF
> +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> 
>  config USB_OHCI_HCD_PCI
>  	bool "OHCI support for PCI-bus USB controllers"
> 

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> On Friday 05 June 2009, Subrata Modak wrote:
> > Correct, it fixes the issue. However, since few changes might have gone
> > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > a retake of the earlier one, but on the latest code. 
> 
> And it got mangled a bit along the way.  Plus, the original one
> goofed up Kconfig dependency displays ... both issues fixed in
> this version, against current mainline GIT.
> 
> If someone can verify all four PPC/OF/OHCI configs build on
> on PPC64, I'm OK with it.
> 
> - Dave

Dave,

Sorry for being late. The patch fixes the issue on the latest git for
PPC64. Infact, the whole drivers/usb/host/ builds just fine:

linux-2.6 # make drivers/usb/host/
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-powerpc
  CALL    scripts/checksyscalls.sh
  CC      drivers/usb/host/ohci-hcd.o
  CC      drivers/usb/host/pci-quirks.o
  CC      drivers/usb/host/uhci-hcd.o
  LD      drivers/usb/host/built-in.o
  CC [M]  drivers/usb/host/isp116x-hcd.o
  CC [M]  drivers/usb/host/u132-hcd.o

You can check in the patch now.

Regards--
Subrata

> 
> 
> ========== CUT HERE
> From: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> Subject: fix build failure for PPC64 randconfig [usb/ohci]
> 
> We could just make the USB_OHCI_HCD_PPC_OF option implicit
> and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> and USB_OHCI_HCD_PPC_OF_LE are set.
> 
> [ dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org: fix patch manglation and dependencies ]
> 
> Signed-off-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> Resent-by: Subrata Modak <subrata-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
> Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
> ---
>  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
>  1 file changed, 15 insertions(+), 14 deletions(-)
> 
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
>  	  Enables support for the USB controller on the MPC52xx or
>  	  STB03xxx processor chip.  If unsure, say Y.
> 
> -config USB_OHCI_HCD_PPC_OF
> -	bool "OHCI support for PPC USB controller on OF platform bus"
> -	depends on USB_OHCI_HCD && PPC_OF
> -	default y
> -	---help---
> -	  Enables support for the USB controller PowerPC present on the
> -	  OpenFirmware platform bus.
> -
>  config USB_OHCI_HCD_PPC_OF_BE
> -	bool "Support big endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default y
> +	bool "OHCI support for OF platform bus (big endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_BIG_ENDIAN_DESC
>  	select USB_OHCI_BIG_ENDIAN_MMIO
> +	---help---
> +	  Enables support for big-endian USB controllers present on the
> +	  OpenFirmware platform bus.
> 
>  config USB_OHCI_HCD_PPC_OF_LE
> -	bool "Support little endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default n
> +	bool "OHCI support for OF platform bus (little endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_LITTLE_ENDIAN
> +	---help---
> +	  Enables support for little-endian USB controllers present on the
> +	  OpenFirmware platform bus.
> +
> +config USB_OHCI_HCD_PPC_OF
> +	bool
> +	depends on USB_OHCI_HCD && PPC_OF
> +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> 
>  config USB_OHCI_HCD_PCI
>  	bool "OHCI support for PCI-bus USB controllers"
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> On Friday 05 June 2009, Subrata Modak wrote:
> > Correct, it fixes the issue. However, since few changes might have gone
> > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > a retake of the earlier one, but on the latest code. 
> 
> And it got mangled a bit along the way.  Plus, the original one
> goofed up Kconfig dependency displays ... both issues fixed in
> this version, against current mainline GIT.
> 
> If someone can verify all four PPC/OF/OHCI configs build on
> on PPC64, I'm OK with it.
> 
> - Dave

Dave,

Sorry for being late. The patch fixes the issue on the latest git for
PPC64. Infact, the whole drivers/usb/host/ builds just fine:

linux-2.6 # make drivers/usb/host/
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-powerpc
  CALL    scripts/checksyscalls.sh
  CC      drivers/usb/host/ohci-hcd.o
  CC      drivers/usb/host/pci-quirks.o
  CC      drivers/usb/host/uhci-hcd.o
  LD      drivers/usb/host/built-in.o
  CC [M]  drivers/usb/host/isp116x-hcd.o
  CC [M]  drivers/usb/host/u132-hcd.o

You can check in the patch now.

Regards--
Subrata

> 
> 
> ========== CUT HERE
> From: Arnd Bergmann <arnd@arndb.de>
> Subject: fix build failure for PPC64 randconfig [usb/ohci]
> 
> We could just make the USB_OHCI_HCD_PPC_OF option implicit
> and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> and USB_OHCI_HCD_PPC_OF_LE are set.
> 
> [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> ---
>  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
>  1 file changed, 15 insertions(+), 14 deletions(-)
> 
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
>  	  Enables support for the USB controller on the MPC52xx or
>  	  STB03xxx processor chip.  If unsure, say Y.
> 
> -config USB_OHCI_HCD_PPC_OF
> -	bool "OHCI support for PPC USB controller on OF platform bus"
> -	depends on USB_OHCI_HCD && PPC_OF
> -	default y
> -	---help---
> -	  Enables support for the USB controller PowerPC present on the
> -	  OpenFirmware platform bus.
> -
>  config USB_OHCI_HCD_PPC_OF_BE
> -	bool "Support big endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default y
> +	bool "OHCI support for OF platform bus (big endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_BIG_ENDIAN_DESC
>  	select USB_OHCI_BIG_ENDIAN_MMIO
> +	---help---
> +	  Enables support for big-endian USB controllers present on the
> +	  OpenFirmware platform bus.
> 
>  config USB_OHCI_HCD_PPC_OF_LE
> -	bool "Support little endian HC"
> -	depends on USB_OHCI_HCD_PPC_OF
> -	default n
> +	bool "OHCI support for OF platform bus (little endian)"
> +	depends on USB_OHCI_HCD && PPC_OF
>  	select USB_OHCI_LITTLE_ENDIAN
> +	---help---
> +	  Enables support for little-endian USB controllers present on the
> +	  OpenFirmware platform bus.
> +
> +config USB_OHCI_HCD_PPC_OF
> +	bool
> +	depends on USB_OHCI_HCD && PPC_OF
> +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> 
>  config USB_OHCI_HCD_PCI
>  	bool "OHCI support for PCI-bus USB controllers"
> 

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: 
> On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> > On Friday 05 June 2009, Subrata Modak wrote:
> > > Correct, it fixes the issue. However, since few changes might have gone
> > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > > a retake of the earlier one, but on the latest code. 
> > 
> > And it got mangled a bit along the way.  Plus, the original one
> > goofed up Kconfig dependency displays ... both issues fixed in
> > this version, against current mainline GIT.
> > 
> > If someone can verify all four PPC/OF/OHCI configs build on
> > on PPC64, I'm OK with it.
> > 
> > - Dave
> 
> Dave,
> 
> Sorry for being late. The patch fixes the issue on the latest git for
> PPC64. Infact, the whole drivers/usb/host/ builds just fine:
> 
> linux-2.6 # make drivers/usb/host/
>   CHK     include/linux/version.h
>   CHK     include/linux/utsrelease.h
>   SYMLINK include/asm -> include/asm-powerpc
>   CALL    scripts/checksyscalls.sh
>   CC      drivers/usb/host/ohci-hcd.o
>   CC      drivers/usb/host/pci-quirks.o
>   CC      drivers/usb/host/uhci-hcd.o
>   LD      drivers/usb/host/built-in.o
>   CC [M]  drivers/usb/host/isp116x-hcd.o
>   CC [M]  drivers/usb/host/u132-hcd.o
> 
> You can check in the patch now.

Dave,

Have you checked in this patch ? Or, does it require some more
modification/updates from somebody´s side ?

Regards--
Subrata

> 
> Regards--
> Subrata
> 
> > 
> > 
> > ========== CUT HERE
> > From: Arnd Bergmann <arnd@arndb.de>
> > Subject: fix build failure for PPC64 randconfig [usb/ohci]
> > 
> > We could just make the USB_OHCI_HCD_PPC_OF option implicit
> > and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> > and USB_OHCI_HCD_PPC_OF_LE are set.
> > 
> > [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
> > 
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
> > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > ---
> >  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
> >  1 file changed, 15 insertions(+), 14 deletions(-)
> > 
> > --- a/drivers/usb/host/Kconfig
> > +++ b/drivers/usb/host/Kconfig
> > @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
> >  	  Enables support for the USB controller on the MPC52xx or
> >  	  STB03xxx processor chip.  If unsure, say Y.
> > 
> > -config USB_OHCI_HCD_PPC_OF
> > -	bool "OHCI support for PPC USB controller on OF platform bus"
> > -	depends on USB_OHCI_HCD && PPC_OF
> > -	default y
> > -	---help---
> > -	  Enables support for the USB controller PowerPC present on the
> > -	  OpenFirmware platform bus.
> > -
> >  config USB_OHCI_HCD_PPC_OF_BE
> > -	bool "Support big endian HC"
> > -	depends on USB_OHCI_HCD_PPC_OF
> > -	default y
> > +	bool "OHCI support for OF platform bus (big endian)"
> > +	depends on USB_OHCI_HCD && PPC_OF
> >  	select USB_OHCI_BIG_ENDIAN_DESC
> >  	select USB_OHCI_BIG_ENDIAN_MMIO
> > +	---help---
> > +	  Enables support for big-endian USB controllers present on the
> > +	  OpenFirmware platform bus.
> > 
> >  config USB_OHCI_HCD_PPC_OF_LE
> > -	bool "Support little endian HC"
> > -	depends on USB_OHCI_HCD_PPC_OF
> > -	default n
> > +	bool "OHCI support for OF platform bus (little endian)"
> > +	depends on USB_OHCI_HCD && PPC_OF
> >  	select USB_OHCI_LITTLE_ENDIAN
> > +	---help---
> > +	  Enables support for little-endian USB controllers present on the
> > +	  OpenFirmware platform bus.
> > +
> > +config USB_OHCI_HCD_PPC_OF
> > +	bool
> > +	depends on USB_OHCI_HCD && PPC_OF
> > +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> > 
> >  config USB_OHCI_HCD_PCI
> >  	bool "OHCI support for PCI-bus USB controllers"
> > 

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: 
> On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> > On Friday 05 June 2009, Subrata Modak wrote:
> > > Correct, it fixes the issue. However, since few changes might have gone
> > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > > a retake of the earlier one, but on the latest code. 
> > 
> > And it got mangled a bit along the way.  Plus, the original one
> > goofed up Kconfig dependency displays ... both issues fixed in
> > this version, against current mainline GIT.
> > 
> > If someone can verify all four PPC/OF/OHCI configs build on
> > on PPC64, I'm OK with it.
> > 
> > - Dave
> 
> Dave,
> 
> Sorry for being late. The patch fixes the issue on the latest git for
> PPC64. Infact, the whole drivers/usb/host/ builds just fine:
> 
> linux-2.6 # make drivers/usb/host/
>   CHK     include/linux/version.h
>   CHK     include/linux/utsrelease.h
>   SYMLINK include/asm -> include/asm-powerpc
>   CALL    scripts/checksyscalls.sh
>   CC      drivers/usb/host/ohci-hcd.o
>   CC      drivers/usb/host/pci-quirks.o
>   CC      drivers/usb/host/uhci-hcd.o
>   LD      drivers/usb/host/built-in.o
>   CC [M]  drivers/usb/host/isp116x-hcd.o
>   CC [M]  drivers/usb/host/u132-hcd.o
> 
> You can check in the patch now.

Dave,

Have you checked in this patch ? Or, does it require some more
modification/updates from somebody´s side ?

Regards--
Subrata

> 
> Regards--
> Subrata
> 
> > 
> > 
> > ========== CUT HERE
> > From: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> > Subject: fix build failure for PPC64 randconfig [usb/ohci]
> > 
> > We could just make the USB_OHCI_HCD_PPC_OF option implicit
> > and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> > and USB_OHCI_HCD_PPC_OF_LE are set.
> > 
> > [ dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org: fix patch manglation and dependencies ]
> > 
> > Signed-off-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> > Resent-by: Subrata Modak <subrata-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
> > Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
> > ---
> >  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
> >  1 file changed, 15 insertions(+), 14 deletions(-)
> > 
> > --- a/drivers/usb/host/Kconfig
> > +++ b/drivers/usb/host/Kconfig
> > @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
> >  	  Enables support for the USB controller on the MPC52xx or
> >  	  STB03xxx processor chip.  If unsure, say Y.
> > 
> > -config USB_OHCI_HCD_PPC_OF
> > -	bool "OHCI support for PPC USB controller on OF platform bus"
> > -	depends on USB_OHCI_HCD && PPC_OF
> > -	default y
> > -	---help---
> > -	  Enables support for the USB controller PowerPC present on the
> > -	  OpenFirmware platform bus.
> > -
> >  config USB_OHCI_HCD_PPC_OF_BE
> > -	bool "Support big endian HC"
> > -	depends on USB_OHCI_HCD_PPC_OF
> > -	default y
> > +	bool "OHCI support for OF platform bus (big endian)"
> > +	depends on USB_OHCI_HCD && PPC_OF
> >  	select USB_OHCI_BIG_ENDIAN_DESC
> >  	select USB_OHCI_BIG_ENDIAN_MMIO
> > +	---help---
> > +	  Enables support for big-endian USB controllers present on the
> > +	  OpenFirmware platform bus.
> > 
> >  config USB_OHCI_HCD_PPC_OF_LE
> > -	bool "Support little endian HC"
> > -	depends on USB_OHCI_HCD_PPC_OF
> > -	default n
> > +	bool "OHCI support for OF platform bus (little endian)"
> > +	depends on USB_OHCI_HCD && PPC_OF
> >  	select USB_OHCI_LITTLE_ENDIAN
> > +	---help---
> > +	  Enables support for little-endian USB controllers present on the
> > +	  OpenFirmware platform bus.
> > +
> > +config USB_OHCI_HCD_PPC_OF
> > +	bool
> > +	depends on USB_OHCI_HCD && PPC_OF
> > +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> > 
> >  config USB_OHCI_HCD_PCI
> >  	bool "OHCI support for PCI-bus USB controllers"
> > 

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: 
> On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> > On Friday 05 June 2009, Subrata Modak wrote:
> > > Correct, it fixes the issue. However, since few changes might have gone
> > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > > a retake of the earlier one, but on the latest code. 
> > 
> > And it got mangled a bit along the way.  Plus, the original one
> > goofed up Kconfig dependency displays ... both issues fixed in
> > this version, against current mainline GIT.
> > 
> > If someone can verify all four PPC/OF/OHCI configs build on
> > on PPC64, I'm OK with it.
> > 
> > - Dave
> 
> Dave,
> 
> Sorry for being late. The patch fixes the issue on the latest git for
> PPC64. Infact, the whole drivers/usb/host/ builds just fine:
> 
> linux-2.6 # make drivers/usb/host/
>   CHK     include/linux/version.h
>   CHK     include/linux/utsrelease.h
>   SYMLINK include/asm -> include/asm-powerpc
>   CALL    scripts/checksyscalls.sh
>   CC      drivers/usb/host/ohci-hcd.o
>   CC      drivers/usb/host/pci-quirks.o
>   CC      drivers/usb/host/uhci-hcd.o
>   LD      drivers/usb/host/built-in.o
>   CC [M]  drivers/usb/host/isp116x-hcd.o
>   CC [M]  drivers/usb/host/u132-hcd.o
> 
> You can check in the patch now.

Dave,

Have you checked in this patch ? Or, does it require some more
modification/updates from somebody´s side ?

Regards--
Subrata

> 
> Regards--
> Subrata
> 
> > 
> > 
> > ========== CUT HERE
> > From: Arnd Bergmann <arnd@arndb.de>
> > Subject: fix build failure for PPC64 randconfig [usb/ohci]
> > 
> > We could just make the USB_OHCI_HCD_PPC_OF option implicit
> > and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> > and USB_OHCI_HCD_PPC_OF_LE are set.
> > 
> > [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
> > 
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
> > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > ---
> >  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
> >  1 file changed, 15 insertions(+), 14 deletions(-)
> > 
> > --- a/drivers/usb/host/Kconfig
> > +++ b/drivers/usb/host/Kconfig
> > @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
> >  	  Enables support for the USB controller on the MPC52xx or
> >  	  STB03xxx processor chip.  If unsure, say Y.
> > 
> > -config USB_OHCI_HCD_PPC_OF
> > -	bool "OHCI support for PPC USB controller on OF platform bus"
> > -	depends on USB_OHCI_HCD && PPC_OF
> > -	default y
> > -	---help---
> > -	  Enables support for the USB controller PowerPC present on the
> > -	  OpenFirmware platform bus.
> > -
> >  config USB_OHCI_HCD_PPC_OF_BE
> > -	bool "Support big endian HC"
> > -	depends on USB_OHCI_HCD_PPC_OF
> > -	default y
> > +	bool "OHCI support for OF platform bus (big endian)"
> > +	depends on USB_OHCI_HCD && PPC_OF
> >  	select USB_OHCI_BIG_ENDIAN_DESC
> >  	select USB_OHCI_BIG_ENDIAN_MMIO
> > +	---help---
> > +	  Enables support for big-endian USB controllers present on the
> > +	  OpenFirmware platform bus.
> > 
> >  config USB_OHCI_HCD_PPC_OF_LE
> > -	bool "Support little endian HC"
> > -	depends on USB_OHCI_HCD_PPC_OF
> > -	default n
> > +	bool "OHCI support for OF platform bus (little endian)"
> > +	depends on USB_OHCI_HCD && PPC_OF
> >  	select USB_OHCI_LITTLE_ENDIAN
> > +	---help---
> > +	  Enables support for little-endian USB controllers present on the
> > +	  OpenFirmware platform bus.
> > +
> > +config USB_OHCI_HCD_PPC_OF
> > +	bool
> > +	depends on USB_OHCI_HCD && PPC_OF
> > +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> > 
> >  config USB_OHCI_HCD_PCI
> >  	bool "OHCI support for PCI-bus USB controllers"
> > 

[BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote:
> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: 
> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> > > On Friday 05 June 2009, Subrata Modak wrote:
> > > > Correct, it fixes the issue. However, since few changes might have gone
> > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > > > a retake of the earlier one, but on the latest code. 
> > > 
> > > And it got mangled a bit along the way.  Plus, the original one
> > > goofed up Kconfig dependency displays ... both issues fixed in
> > > this version, against current mainline GIT.
> > > 
> > > If someone can verify all four PPC/OF/OHCI configs build on
> > > on PPC64, I'm OK with it.
> > > 
> > > - Dave
> > 
> > Dave,
> > 
> > Sorry for being late. The patch fixes the issue on the latest git for
> > PPC64. Infact, the whole drivers/usb/host/ builds just fine:
> > 
> > linux-2.6 # make drivers/usb/host/
> >   CHK     include/linux/version.h
> >   CHK     include/linux/utsrelease.h
> >   SYMLINK include/asm -> include/asm-powerpc
> >   CALL    scripts/checksyscalls.sh
> >   CC      drivers/usb/host/ohci-hcd.o
> >   CC      drivers/usb/host/pci-quirks.o
> >   CC      drivers/usb/host/uhci-hcd.o
> >   LD      drivers/usb/host/built-in.o
> >   CC [M]  drivers/usb/host/isp116x-hcd.o
> >   CC [M]  drivers/usb/host/u132-hcd.o
> > 
> > You can check in the patch now.
> 
> Dave,
> 
> Have you checked in this patch ? Or, does it require some more
> modification/updates from somebody´s side ?
> 

Dave,

Would you consider checking in this patch ?

Regards--
Subrata

> Regards--
> Subrata
> 
> > 
> > Regards--
> > Subrata
> > 
> > > 
> > > 
> > > ========== CUT HERE
> > > From: Arnd Bergmann <arnd@arndb.de>
> > > Subject: fix build failure for PPC64 randconfig [usb/ohci]
> > > 
> > > We could just make the USB_OHCI_HCD_PPC_OF option implicit
> > > and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> > > and USB_OHCI_HCD_PPC_OF_LE are set.
> > > 
> > > [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
> > > 
> > > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > > Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
> > > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > > ---
> > >  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
> > >  1 file changed, 15 insertions(+), 14 deletions(-)
> > > 
> > > --- a/drivers/usb/host/Kconfig
> > > +++ b/drivers/usb/host/Kconfig
> > > @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
> > >  	  Enables support for the USB controller on the MPC52xx or
> > >  	  STB03xxx processor chip.  If unsure, say Y.
> > > 
> > > -config USB_OHCI_HCD_PPC_OF
> > > -	bool "OHCI support for PPC USB controller on OF platform bus"
> > > -	depends on USB_OHCI_HCD && PPC_OF
> > > -	default y
> > > -	---help---
> > > -	  Enables support for the USB controller PowerPC present on the
> > > -	  OpenFirmware platform bus.
> > > -
> > >  config USB_OHCI_HCD_PPC_OF_BE
> > > -	bool "Support big endian HC"
> > > -	depends on USB_OHCI_HCD_PPC_OF
> > > -	default y
> > > +	bool "OHCI support for OF platform bus (big endian)"
> > > +	depends on USB_OHCI_HCD && PPC_OF
> > >  	select USB_OHCI_BIG_ENDIAN_DESC
> > >  	select USB_OHCI_BIG_ENDIAN_MMIO
> > > +	---help---
> > > +	  Enables support for big-endian USB controllers present on the
> > > +	  OpenFirmware platform bus.
> > > 
> > >  config USB_OHCI_HCD_PPC_OF_LE
> > > -	bool "Support little endian HC"
> > > -	depends on USB_OHCI_HCD_PPC_OF
> > > -	default n
> > > +	bool "OHCI support for OF platform bus (little endian)"
> > > +	depends on USB_OHCI_HCD && PPC_OF
> > >  	select USB_OHCI_LITTLE_ENDIAN
> > > +	---help---
> > > +	  Enables support for little-endian USB controllers present on the
> > > +	  OpenFirmware platform bus.
> > > +
> > > +config USB_OHCI_HCD_PPC_OF
> > > +	bool
> > > +	depends on USB_OHCI_HCD && PPC_OF
> > > +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> > > 
> > >  config USB_OHCI_HCD_PCI
> > >  	bool "OHCI support for PCI-bus USB controllers"
> > > 

[BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote:
> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: 
> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> > > On Friday 05 June 2009, Subrata Modak wrote:
> > > > Correct, it fixes the issue. However, since few changes might have gone
> > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > > > a retake of the earlier one, but on the latest code. 
> > > 
> > > And it got mangled a bit along the way.  Plus, the original one
> > > goofed up Kconfig dependency displays ... both issues fixed in
> > > this version, against current mainline GIT.
> > > 
> > > If someone can verify all four PPC/OF/OHCI configs build on
> > > on PPC64, I'm OK with it.
> > > 
> > > - Dave
> > 
> > Dave,
> > 
> > Sorry for being late. The patch fixes the issue on the latest git for
> > PPC64. Infact, the whole drivers/usb/host/ builds just fine:
> > 
> > linux-2.6 # make drivers/usb/host/
> >   CHK     include/linux/version.h
> >   CHK     include/linux/utsrelease.h
> >   SYMLINK include/asm -> include/asm-powerpc
> >   CALL    scripts/checksyscalls.sh
> >   CC      drivers/usb/host/ohci-hcd.o
> >   CC      drivers/usb/host/pci-quirks.o
> >   CC      drivers/usb/host/uhci-hcd.o
> >   LD      drivers/usb/host/built-in.o
> >   CC [M]  drivers/usb/host/isp116x-hcd.o
> >   CC [M]  drivers/usb/host/u132-hcd.o
> > 
> > You can check in the patch now.
> 
> Dave,
> 
> Have you checked in this patch ? Or, does it require some more
> modification/updates from somebody´s side ?
> 

Dave,

Would you consider checking in this patch ?

Regards--
Subrata

> Regards--
> Subrata
> 
> > 
> > Regards--
> > Subrata
> > 
> > > 
> > > 
> > > ========== CUT HERE
> > > From: Arnd Bergmann <arnd@arndb.de>
> > > Subject: fix build failure for PPC64 randconfig [usb/ohci]
> > > 
> > > We could just make the USB_OHCI_HCD_PPC_OF option implicit
> > > and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> > > and USB_OHCI_HCD_PPC_OF_LE are set.
> > > 
> > > [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
> > > 
> > > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > > Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
> > > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > > ---
> > >  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
> > >  1 file changed, 15 insertions(+), 14 deletions(-)
> > > 
> > > --- a/drivers/usb/host/Kconfig
> > > +++ b/drivers/usb/host/Kconfig
> > > @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
> > >  	  Enables support for the USB controller on the MPC52xx or
> > >  	  STB03xxx processor chip.  If unsure, say Y.
> > > 
> > > -config USB_OHCI_HCD_PPC_OF
> > > -	bool "OHCI support for PPC USB controller on OF platform bus"
> > > -	depends on USB_OHCI_HCD && PPC_OF
> > > -	default y
> > > -	---help---
> > > -	  Enables support for the USB controller PowerPC present on the
> > > -	  OpenFirmware platform bus.
> > > -
> > >  config USB_OHCI_HCD_PPC_OF_BE
> > > -	bool "Support big endian HC"
> > > -	depends on USB_OHCI_HCD_PPC_OF
> > > -	default y
> > > +	bool "OHCI support for OF platform bus (big endian)"
> > > +	depends on USB_OHCI_HCD && PPC_OF
> > >  	select USB_OHCI_BIG_ENDIAN_DESC
> > >  	select USB_OHCI_BIG_ENDIAN_MMIO
> > > +	---help---
> > > +	  Enables support for big-endian USB controllers present on the
> > > +	  OpenFirmware platform bus.
> > > 
> > >  config USB_OHCI_HCD_PPC_OF_LE
> > > -	bool "Support little endian HC"
> > > -	depends on USB_OHCI_HCD_PPC_OF
> > > -	default n
> > > +	bool "OHCI support for OF platform bus (little endian)"
> > > +	depends on USB_OHCI_HCD && PPC_OF
> > >  	select USB_OHCI_LITTLE_ENDIAN
> > > +	---help---
> > > +	  Enables support for little-endian USB controllers present on the
> > > +	  OpenFirmware platform bus.
> > > +
> > > +config USB_OHCI_HCD_PPC_OF
> > > +	bool
> > > +	depends on USB_OHCI_HCD && PPC_OF
> > > +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> > > 
> > >  config USB_OHCI_HCD_PCI
> > >  	bool "OHCI support for PCI-bus USB controllers"
> > > 

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

[BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote:
> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: 
> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> > > On Friday 05 June 2009, Subrata Modak wrote:
> > > > Correct, it fixes the issue. However, since few changes might have gone
> > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > > > a retake of the earlier one, but on the latest code. 
> > > 
> > > And it got mangled a bit along the way.  Plus, the original one
> > > goofed up Kconfig dependency displays ... both issues fixed in
> > > this version, against current mainline GIT.
> > > 
> > > If someone can verify all four PPC/OF/OHCI configs build on
> > > on PPC64, I'm OK with it.
> > > 
> > > - Dave
> > 
> > Dave,
> > 
> > Sorry for being late. The patch fixes the issue on the latest git for
> > PPC64. Infact, the whole drivers/usb/host/ builds just fine:
> > 
> > linux-2.6 # make drivers/usb/host/
> >   CHK     include/linux/version.h
> >   CHK     include/linux/utsrelease.h
> >   SYMLINK include/asm -> include/asm-powerpc
> >   CALL    scripts/checksyscalls.sh
> >   CC      drivers/usb/host/ohci-hcd.o
> >   CC      drivers/usb/host/pci-quirks.o
> >   CC      drivers/usb/host/uhci-hcd.o
> >   LD      drivers/usb/host/built-in.o
> >   CC [M]  drivers/usb/host/isp116x-hcd.o
> >   CC [M]  drivers/usb/host/u132-hcd.o
> > 
> > You can check in the patch now.
> 
> Dave,
> 
> Have you checked in this patch ? Or, does it require some more
> modification/updates from somebody´s side ?
> 

Dave,

Would you consider checking in this patch ?

Regards--
Subrata

> Regards--
> Subrata
> 
> > 
> > Regards--
> > Subrata
> > 
> > > 
> > > 
> > > ========== CUT HERE
> > > From: Arnd Bergmann <arnd@arndb.de>
> > > Subject: fix build failure for PPC64 randconfig [usb/ohci]
> > > 
> > > We could just make the USB_OHCI_HCD_PPC_OF option implicit
> > > and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> > > and USB_OHCI_HCD_PPC_OF_LE are set.
> > > 
> > > [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
> > > 
> > > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > > Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
> > > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > > ---
> > >  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
> > >  1 file changed, 15 insertions(+), 14 deletions(-)
> > > 
> > > --- a/drivers/usb/host/Kconfig
> > > +++ b/drivers/usb/host/Kconfig
> > > @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
> > >  	  Enables support for the USB controller on the MPC52xx or
> > >  	  STB03xxx processor chip.  If unsure, say Y.
> > > 
> > > -config USB_OHCI_HCD_PPC_OF
> > > -	bool "OHCI support for PPC USB controller on OF platform bus"
> > > -	depends on USB_OHCI_HCD && PPC_OF
> > > -	default y
> > > -	---help---
> > > -	  Enables support for the USB controller PowerPC present on the
> > > -	  OpenFirmware platform bus.
> > > -
> > >  config USB_OHCI_HCD_PPC_OF_BE
> > > -	bool "Support big endian HC"
> > > -	depends on USB_OHCI_HCD_PPC_OF
> > > -	default y
> > > +	bool "OHCI support for OF platform bus (big endian)"
> > > +	depends on USB_OHCI_HCD && PPC_OF
> > >  	select USB_OHCI_BIG_ENDIAN_DESC
> > >  	select USB_OHCI_BIG_ENDIAN_MMIO
> > > +	---help---
> > > +	  Enables support for big-endian USB controllers present on the
> > > +	  OpenFirmware platform bus.
> > > 
> > >  config USB_OHCI_HCD_PPC_OF_LE
> > > -	bool "Support little endian HC"
> > > -	depends on USB_OHCI_HCD_PPC_OF
> > > -	default n
> > > +	bool "OHCI support for OF platform bus (little endian)"
> > > +	depends on USB_OHCI_HCD && PPC_OF
> > >  	select USB_OHCI_LITTLE_ENDIAN
> > > +	---help---
> > > +	  Enables support for little-endian USB controllers present on the
> > > +	  OpenFirmware platform bus.
> > > +
> > > +config USB_OHCI_HCD_PPC_OF
> > > +	bool
> > > +	depends on USB_OHCI_HCD && PPC_OF
> > > +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> > > 
> > >  config USB_OHCI_HCD_PCI
> > >  	bool "OHCI support for PCI-bus USB controllers"
> > > 

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Grant Likely]

On Wed, Jun 17, 2009 at 6:53 AM, Subrata
Modak<subrata@linux.vnet.ibm.com> wrote:
> On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote:
>> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote:
>> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
>> > > On Friday 05 June 2009, Subrata Modak wrote:
>> > > > Correct, it fixes the issue. However, since few changes might have gone
>> > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
>> > > > a retake of the earlier one, but on the latest code.
>> > >
>> > > And it got mangled a bit along the way.  Plus, the original one
>> > > goofed up Kconfig dependency displays ... both issues fixed in
>> > > this version, against current mainline GIT.
>> > >
>> > > If someone can verify all four PPC/OF/OHCI configs build on
>> > > on PPC64, I'm OK with it.
>> > >
>> > > - Dave
>> >
>> > Dave,
>> >
>> > Sorry for being late. The patch fixes the issue on the latest git for
>> > PPC64. Infact, the whole drivers/usb/host/ builds just fine:
>> >
>> > linux-2.6 # make drivers/usb/host/
>> >   CHK     include/linux/version.h
>> >   CHK     include/linux/utsrelease.h
>> >   SYMLINK include/asm -> include/asm-powerpc
>> >   CALL    scripts/checksyscalls.sh
>> >   CC      drivers/usb/host/ohci-hcd.o
>> >   CC      drivers/usb/host/pci-quirks.o
>> >   CC      drivers/usb/host/uhci-hcd.o
>> >   LD      drivers/usb/host/built-in.o
>> >   CC [M]  drivers/usb/host/isp116x-hcd.o
>> >   CC [M]  drivers/usb/host/u132-hcd.o
>> >
>> > You can check in the patch now.
>>
>> Dave,
>>
>> Have you checked in this patch ? Or, does it require some more
>> modification/updates from somebody´s side ?
>>
>
> Dave,
>
> Would you consider checking in this patch ?

Hold off please; give me a couple of hours to investigate.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Grant Likely]

On Wed, Jun 17, 2009 at 6:53 AM, Subrata
Modak<subrata@linux.vnet.ibm.com> wrote:
> On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote:
>> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote:
>> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
>> > > On Friday 05 June 2009, Subrata Modak wrote:
>> > > > Correct, it fixes the issue. However, since few changes might have gone
>> > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
>> > > > a retake of the earlier one, but on the latest code.
>> > >
>> > > And it got mangled a bit along the way.  Plus, the original one
>> > > goofed up Kconfig dependency displays ... both issues fixed in
>> > > this version, against current mainline GIT.
>> > >
>> > > If someone can verify all four PPC/OF/OHCI configs build on
>> > > on PPC64, I'm OK with it.
>> > >
>> > > - Dave
>> >
>> > Dave,
>> >
>> > Sorry for being late. The patch fixes the issue on the latest git for
>> > PPC64. Infact, the whole drivers/usb/host/ builds just fine:
>> >
>> > linux-2.6 # make drivers/usb/host/
>> >   CHK     include/linux/version.h
>> >   CHK     include/linux/utsrelease.h
>> >   SYMLINK include/asm -> include/asm-powerpc
>> >   CALL    scripts/checksyscalls.sh
>> >   CC      drivers/usb/host/ohci-hcd.o
>> >   CC      drivers/usb/host/pci-quirks.o
>> >   CC      drivers/usb/host/uhci-hcd.o
>> >   LD      drivers/usb/host/built-in.o
>> >   CC [M]  drivers/usb/host/isp116x-hcd.o
>> >   CC [M]  drivers/usb/host/u132-hcd.o
>> >
>> > You can check in the patch now.
>>
>> Dave,
>>
>> Have you checked in this patch ? Or, does it require some more
>> modification/updates from somebody´s side ?
>>
>
> Dave,
>
> Would you consider checking in this patch ?

Hold off please; give me a couple of hours to investigate.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Grant Likely]

On Wed, Jun 17, 2009 at 6:53 AM, Subrata
Modak<subrata@linux.vnet.ibm.com> wrote:
> On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote:
>> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote:
>> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
>> > > On Friday 05 June 2009, Subrata Modak wrote:
>> > > > Correct, it fixes the issue. However, since few changes might have=
 gone
>> > > > to the Kconfig, the patch does not apply cleanly. Below is the pat=
ch, just
>> > > > a retake of the earlier one, but on the latest code.
>> > >
>> > > And it got mangled a bit along the way. =A0Plus, the original one
>> > > goofed up Kconfig dependency displays ... both issues fixed in
>> > > this version, against current mainline GIT.
>> > >
>> > > If someone can verify all four PPC/OF/OHCI configs build on
>> > > on PPC64, I'm OK with it.
>> > >
>> > > - Dave
>> >
>> > Dave,
>> >
>> > Sorry for being late. The patch fixes the issue on the latest git for
>> > PPC64. Infact, the whole drivers/usb/host/ builds just fine:
>> >
>> > linux-2.6 # make drivers/usb/host/
>> > =A0 CHK =A0 =A0 include/linux/version.h
>> > =A0 CHK =A0 =A0 include/linux/utsrelease.h
>> > =A0 SYMLINK include/asm -> include/asm-powerpc
>> > =A0 CALL =A0 =A0scripts/checksyscalls.sh
>> > =A0 CC =A0 =A0 =A0drivers/usb/host/ohci-hcd.o
>> > =A0 CC =A0 =A0 =A0drivers/usb/host/pci-quirks.o
>> > =A0 CC =A0 =A0 =A0drivers/usb/host/uhci-hcd.o
>> > =A0 LD =A0 =A0 =A0drivers/usb/host/built-in.o
>> > =A0 CC [M] =A0drivers/usb/host/isp116x-hcd.o
>> > =A0 CC [M] =A0drivers/usb/host/u132-hcd.o
>> >
>> > You can check in the patch now.
>>
>> Dave,
>>
>> Have you checked in this patch ? Or, does it require some more
>> modification/updates from somebody=B4s side ?
>>
>
> Dave,
>
> Would you consider checking in this patch ?

Hold off please; give me a couple of hours to investigate.

g.

--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Grant Likely]

On Wed, Jun 17, 2009 at 12:15 PM, Grant Likely<grant.likely@secretlab.ca> wrote:
> On Wed, Jun 17, 2009 at 6:53 AM, Subrata
> Modak<subrata@linux.vnet.ibm.com> wrote:
>> On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote:
>>> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote:
>>> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
>>> > > On Friday 05 June 2009, Subrata Modak wrote:
>>> > > > Correct, it fixes the issue. However, since few changes might have gone
>>> > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
>>> > > > a retake of the earlier one, but on the latest code.
>>> > >
>>> > > And it got mangled a bit along the way.  Plus, the original one
>>> > > goofed up Kconfig dependency displays ... both issues fixed in
>>> > > this version, against current mainline GIT.
>>> > >
>>> > > If someone can verify all four PPC/OF/OHCI configs build on
>>> > > on PPC64, I'm OK with it.
>>> > >
>>> > > - Dave
>>> >
>>> > Dave,
>>> >
>>> > Sorry for being late. The patch fixes the issue on the latest git for
>>> > PPC64. Infact, the whole drivers/usb/host/ builds just fine:
>>> >
>>> > linux-2.6 # make drivers/usb/host/
>>> >   CHK     include/linux/version.h
>>> >   CHK     include/linux/utsrelease.h
>>> >   SYMLINK include/asm -> include/asm-powerpc
>>> >   CALL    scripts/checksyscalls.sh
>>> >   CC      drivers/usb/host/ohci-hcd.o
>>> >   CC      drivers/usb/host/pci-quirks.o
>>> >   CC      drivers/usb/host/uhci-hcd.o
>>> >   LD      drivers/usb/host/built-in.o
>>> >   CC [M]  drivers/usb/host/isp116x-hcd.o
>>> >   CC [M]  drivers/usb/host/u132-hcd.o
>>> >
>>> > You can check in the patch now.
>>>
>>> Dave,
>>>
>>> Have you checked in this patch ? Or, does it require some more
>>> modification/updates from somebody´s side ?
>>>
>>
>> Dave,
>>
>> Would you consider checking in this patch ?
>
> Hold off please; give me a couple of hours to investigate.

Never mind; I replied to the wrong email.  Please ignore my comments.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Grant Likely]

On Wed, Jun 17, 2009 at 12:15 PM, Grant Likely<grant.likely@secretlab.ca> wrote:
> On Wed, Jun 17, 2009 at 6:53 AM, Subrata
> Modak<subrata@linux.vnet.ibm.com> wrote:
>> On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote:
>>> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote:
>>> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
>>> > > On Friday 05 June 2009, Subrata Modak wrote:
>>> > > > Correct, it fixes the issue. However, since few changes might have gone
>>> > > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
>>> > > > a retake of the earlier one, but on the latest code.
>>> > >
>>> > > And it got mangled a bit along the way.  Plus, the original one
>>> > > goofed up Kconfig dependency displays ... both issues fixed in
>>> > > this version, against current mainline GIT.
>>> > >
>>> > > If someone can verify all four PPC/OF/OHCI configs build on
>>> > > on PPC64, I'm OK with it.
>>> > >
>>> > > - Dave
>>> >
>>> > Dave,
>>> >
>>> > Sorry for being late. The patch fixes the issue on the latest git for
>>> > PPC64. Infact, the whole drivers/usb/host/ builds just fine:
>>> >
>>> > linux-2.6 # make drivers/usb/host/
>>> >   CHK     include/linux/version.h
>>> >   CHK     include/linux/utsrelease.h
>>> >   SYMLINK include/asm -> include/asm-powerpc
>>> >   CALL    scripts/checksyscalls.sh
>>> >   CC      drivers/usb/host/ohci-hcd.o
>>> >   CC      drivers/usb/host/pci-quirks.o
>>> >   CC      drivers/usb/host/uhci-hcd.o
>>> >   LD      drivers/usb/host/built-in.o
>>> >   CC [M]  drivers/usb/host/isp116x-hcd.o
>>> >   CC [M]  drivers/usb/host/u132-hcd.o
>>> >
>>> > You can check in the patch now.
>>>
>>> Dave,
>>>
>>> Have you checked in this patch ? Or, does it require some more
>>> modification/updates from somebody´s side ?
>>>
>>
>> Dave,
>>
>> Would you consider checking in this patch ?
>
> Hold off please; give me a couple of hours to investigate.

Never mind; I replied to the wrong email.  Please ignore my comments.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Grant Likely]

On Wed, Jun 17, 2009 at 12:15 PM, Grant Likely<grant.likely@secretlab.ca> w=
rote:
> On Wed, Jun 17, 2009 at 6:53 AM, Subrata
> Modak<subrata@linux.vnet.ibm.com> wrote:
>> On Mon, 2009-06-15 at 12:21 +0530, Subrata Modak wrote:
>>> On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote:
>>> > On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
>>> > > On Friday 05 June 2009, Subrata Modak wrote:
>>> > > > Correct, it fixes the issue. However, since few changes might hav=
e gone
>>> > > > to the Kconfig, the patch does not apply cleanly. Below is the pa=
tch, just
>>> > > > a retake of the earlier one, but on the latest code.
>>> > >
>>> > > And it got mangled a bit along the way. =A0Plus, the original one
>>> > > goofed up Kconfig dependency displays ... both issues fixed in
>>> > > this version, against current mainline GIT.
>>> > >
>>> > > If someone can verify all four PPC/OF/OHCI configs build on
>>> > > on PPC64, I'm OK with it.
>>> > >
>>> > > - Dave
>>> >
>>> > Dave,
>>> >
>>> > Sorry for being late. The patch fixes the issue on the latest git for
>>> > PPC64. Infact, the whole drivers/usb/host/ builds just fine:
>>> >
>>> > linux-2.6 # make drivers/usb/host/
>>> > =A0 CHK =A0 =A0 include/linux/version.h
>>> > =A0 CHK =A0 =A0 include/linux/utsrelease.h
>>> > =A0 SYMLINK include/asm -> include/asm-powerpc
>>> > =A0 CALL =A0 =A0scripts/checksyscalls.sh
>>> > =A0 CC =A0 =A0 =A0drivers/usb/host/ohci-hcd.o
>>> > =A0 CC =A0 =A0 =A0drivers/usb/host/pci-quirks.o
>>> > =A0 CC =A0 =A0 =A0drivers/usb/host/uhci-hcd.o
>>> > =A0 LD =A0 =A0 =A0drivers/usb/host/built-in.o
>>> > =A0 CC [M] =A0drivers/usb/host/isp116x-hcd.o
>>> > =A0 CC [M] =A0drivers/usb/host/u132-hcd.o
>>> >
>>> > You can check in the patch now.
>>>
>>> Dave,
>>>
>>> Have you checked in this patch ? Or, does it require some more
>>> modification/updates from somebody=B4s side ?
>>>
>>
>> Dave,
>>
>> Would you consider checking in this patch ?
>
> Hold off please; give me a couple of hours to investigate.

Never mind; I replied to the wrong email.  Please ignore my comments.

g.

--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Jon Smirl]

On Thu, Jun 4, 2009 at 9:31 AM, Subrata Modak
<subrata@linux.vnet.ibm.com> wrote:
> CC      drivers/usb/host/ohci-hcd.o
> In file included from drivers/usb/host/ohci-hcd.c:1060:
> drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selected for ppc-of-ohci"
> make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
> make[2]: *** [drivers/usb/host] Error 2
> make[1]: *** [drivers/usb] Error 2
> make: *** [drivers] Error 2
>
> I reported this earlier, and there were some discussions:
> http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d5572d3d225

Proposed patch by Arnd should fix this. It has not been merged.
http://lkml.org/lkml/2009/4/22/49

-- 
Jon Smirl
jonsmirl@gmail.com

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Jon Smirl]

On Thu, Jun 4, 2009 at 9:31 AM, Subrata Modak
<subrata@linux.vnet.ibm.com> wrote:
> CC      drivers/usb/host/ohci-hcd.o
> In file included from drivers/usb/host/ohci-hcd.c:1060:
> drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selected for ppc-of-ohci"
> make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
> make[2]: *** [drivers/usb/host] Error 2
> make[1]: *** [drivers/usb] Error 2
> make: *** [drivers] Error 2
>
> I reported this earlier, and there were some discussions:
> http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d5572d3d225

Proposed patch by Arnd should fix this. It has not been merged.
http://lkml.org/lkml/2009/4/22/49

-- 
Jon Smirl
jonsmirl@gmail.com

Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Jon Smirl]

On Thu, Jun 4, 2009 at 9:31 AM, Subrata Modak
<subrata@linux.vnet.ibm.com> wrote:
> CC =A0 =A0 =A0drivers/usb/host/ohci-hcd.o
> In file included from drivers/usb/host/ohci-hcd.c:1060:
> drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selecte=
d for ppc-of-ohci"
> make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
> make[2]: *** [drivers/usb/host] Error 2
> make[1]: *** [drivers/usb] Error 2
> make: *** [drivers] Error 2
>
> I reported this earlier, and there were some discussions:
> http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d=
5572d3d225

Proposed patch by Arnd should fix this. It has not been merged.
http://lkml.org/lkml/2009/4/22/49

--=20
Jon Smirl
jonsmirl@gmail.com

[BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

CC      drivers/usb/host/ohci-hcd.o
In file included from drivers/usb/host/ohci-hcd.c:1060:
drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selected for ppc-of-ohci"
make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
make[2]: *** [drivers/usb/host] Error 2
make[1]: *** [drivers/usb] Error 2
make: *** [drivers] Error 2

I reported this earlier, and there were some discussions:
http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d5572d3d225

Has the proposed patch made into the tree ?

Regards--
Subrata

==============================
.config below:
==============================
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc8
# Thu Jun  4 04:10:03 2009
#
CONFIG_PPC64=y

#
# Processor support
#
CONFIG_PPC_BOOK3S=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
# CONFIG_VSX is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y

#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=m
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_MM_OWNER=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB_ALLOCATOR is not set
# CONFIG_SLUB_ALLOCATOR is not set
CONFIG_SLQB_ALLOCATOR=y
CONFIG_SLQB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_BLOCK is not set
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y

#
# Platform support
#
CONFIG_PPC_PSERIES=y
# CONFIG_PPC_SPLPAR is not set
# CONFIG_EEH is not set
CONFIG_LPARCFG=y
CONFIG_PPC_PSERIES_DEBUG=y
CONFIG_PPC_SMLPAR=y
CONFIG_PPC_ISERIES=y

#
# iSeries device drivers
#
CONFIG_VIOTAPE=m
CONFIG_VIOPATH=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_PASEMI=y

#
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_IOMMU=y
CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE=y
# CONFIG_PPC_PS3 is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_COMMON=y
CONFIG_PPC_CELL_NATIVE=y
# CONFIG_PPC_IBM_CELL_BLADE is not set
CONFIG_PPC_CELLEB=y
CONFIG_PPC_CELL_QPACE=y

#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=m
CONFIG_SPU_FS_64K_LS=y
CONFIG_SPU_TRACE=m
CONFIG_SPU_BASE=y
# CONFIG_CBE_RAS is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_UDBG_BEAT=y
CONFIG_XICS=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
# CONFIG_RTAS_PROC is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_REGREAD=y
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set

#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_BINFMT_ELF is not set
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_CRASH_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0 root=/dev/sda2"
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ISA_DMA_API=y

#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_IOV=y
# CONFIG_HAS_RAPIDIO is not set
CONFIG_RELOCATABLE=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
# CONFIG_NET is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# A new alternative FireWire stack is available with EXPERIMENTAL=y
#
# CONFIG_IEEE1394 is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_BUS=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_WINDFARM=y
CONFIG_IBM_NEW_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
CONFIG_PHONE=m
# CONFIG_PHONE_IXJ is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
# CONFIG_JOYSTICK_IFORCE_USB is not set
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=y
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_JOYSTICK_WALKERA0701=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_DA9034=m
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_POWERMATE=m
# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_PARKBD=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_XILINX_XPS_PS2=m
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
CONFIG_DIGIEPCA=m
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
CONFIG_SPECIALIX=m
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_ICOM is not set
# CONFIG_SERIAL_TXX9 is not set
CONFIG_HAS_TXX9_SERIAL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
CONFIG_HVC_ISERIES=y
# CONFIG_HVC_RTAS is not set
CONFIG_HVC_BEAT=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_HVCS=y
CONFIG_IBM_BSR=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_HW_RANDOM_PASEMI is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_R3964=y
CONFIG_APPLICOM=m
CONFIG_HANGCHECK_TIMER=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIAPRO=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
# CONFIG_I2C_PASEMI is not set
CONFIG_I2C_SIMTEC=m

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y

#
# Miscellaneous I2C Chip support
#
CONFIG_PCF8575=m
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_GPIO=y

#
# SPI Protocol Masters
#
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y

#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_XILINX is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=m

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
# CONFIG_GPIO_MCP23S08 is not set
CONFIG_W1=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_WM8350_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_WATCHDOG_RTAS=y

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=y
# CONFIG_WDT_501_PCI is not set

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=y
CONFIG_TPS65010=m
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_MFD_WM8400=m
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_AB3100_CORE=y
CONFIG_EZX_PCAP=y
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
CONFIG_DAB=y
CONFIG_USB_DABUSB=y

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_MGA=m
CONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_DA903X is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
# CONFIG_SND_SEQ_HRTIMER_DEFAULT is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_PCI is not set
CONFIG_SND_PPC=y
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=y
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_AIRCABLE=m
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
CONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_VST=m
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y

#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_SDHCI_OF=m
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_SPI is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set

#
# LED drivers
#

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_DEBUG_VERBOSE is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_PASEMI is not set
# CONFIG_EDAC_CELL is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_TWL4030 is not set
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=y

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_DS3234=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=m
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=m
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_SMX=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
# CONFIG_STAGING is not set

#
# File systems
#
CONFIG_FS_POSIX_ACL=y
# CONFIG_FSNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
# CONFIG_CRC32 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLQB_DEBUG=y
# CONFIG_SLQB_DEBUG_ON is not set
# CONFIG_SLQB_SYSFS is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SCHED_TRACER is not set
CONFIG_ENABLE_CONTEXT_SWITCH_TRACER=y
CONFIG_ENABLE_EVENT_TRACING=y
CONFIG_BOOT_TRACER=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_KMEMTRACE=y
CONFIG_WORKQUEUE_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_MARKERS is not set
CONFIG_SAMPLE_TRACEPOINTS=m
# CONFIG_SAMPLE_TRACE_EVENTS is not set
CONFIG_SAMPLE_KOBJECT=m
CONFIG_SAMPLE_KPROBES=m
CONFIG_SAMPLE_KRETPROBES=m
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_HCALL_STATS=y
CONFIG_PPC_EMULATED_STATS=y
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_EARLY_DEBUG_LPAR=y
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_TOMOYO=y
CONFIG_KEYS_COMPAT=y
CONFIG_CRYPTO=m

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_VIRTUALIZATION=y
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_BALLOON=m
==============================

[BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]

[Subrata Modak]

CC      drivers/usb/host/ohci-hcd.o
In file included from drivers/usb/host/ohci-hcd.c:1060:
drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selected for ppc-of-ohci"
make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
make[2]: *** [drivers/usb/host] Error 2
make[1]: *** [drivers/usb] Error 2
make: *** [drivers] Error 2

I reported this earlier, and there were some discussions:
http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d5572d3d225

Has the proposed patch made into the tree ?

Regards--
Subrata

==============================
.config below:
==============================
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc8
# Thu Jun  4 04:10:03 2009
#
CONFIG_PPC64=y

#
# Processor support
#
CONFIG_PPC_BOOK3S=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
# CONFIG_VSX is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y

#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=m
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_MM_OWNER=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB_ALLOCATOR is not set
# CONFIG_SLUB_ALLOCATOR is not set
CONFIG_SLQB_ALLOCATOR=y
CONFIG_SLQB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_BLOCK is not set
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y

#
# Platform support
#
CONFIG_PPC_PSERIES=y
# CONFIG_PPC_SPLPAR is not set
# CONFIG_EEH is not set
CONFIG_LPARCFG=y
CONFIG_PPC_PSERIES_DEBUG=y
CONFIG_PPC_SMLPAR=y
CONFIG_PPC_ISERIES=y

#
# iSeries device drivers
#
CONFIG_VIOTAPE=m
CONFIG_VIOPATH=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_PASEMI=y

#
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_IOMMU=y
CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE=y
# CONFIG_PPC_PS3 is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_COMMON=y
CONFIG_PPC_CELL_NATIVE=y
# CONFIG_PPC_IBM_CELL_BLADE is not set
CONFIG_PPC_CELLEB=y
CONFIG_PPC_CELL_QPACE=y

#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=m
CONFIG_SPU_FS_64K_LS=y
CONFIG_SPU_TRACE=m
CONFIG_SPU_BASE=y
# CONFIG_CBE_RAS is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_UDBG_BEAT=y
CONFIG_XICS=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
# CONFIG_RTAS_PROC is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_REGREAD=y
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set

#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_BINFMT_ELF is not set
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_CRASH_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0 root=/dev/sda2"
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ISA_DMA_API=y

#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_IOV=y
# CONFIG_HAS_RAPIDIO is not set
CONFIG_RELOCATABLE=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
# CONFIG_NET is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# A new alternative FireWire stack is available with EXPERIMENTAL=y
#
# CONFIG_IEEE1394 is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_BUS=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_WINDFARM=y
CONFIG_IBM_NEW_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
CONFIG_PHONE=m
# CONFIG_PHONE_IXJ is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
# CONFIG_JOYSTICK_IFORCE_USB is not set
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=y
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_JOYSTICK_WALKERA0701=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_DA9034=m
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_POWERMATE=m
# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_PARKBD=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_XILINX_XPS_PS2=m
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
CONFIG_DIGIEPCA=m
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
CONFIG_SPECIALIX=m
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_ICOM is not set
# CONFIG_SERIAL_TXX9 is not set
CONFIG_HAS_TXX9_SERIAL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
CONFIG_HVC_ISERIES=y
# CONFIG_HVC_RTAS is not set
CONFIG_HVC_BEAT=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_HVCS=y
CONFIG_IBM_BSR=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_HW_RANDOM_PASEMI is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_R3964=y
CONFIG_APPLICOM=m
CONFIG_HANGCHECK_TIMER=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIAPRO=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
# CONFIG_I2C_PASEMI is not set
CONFIG_I2C_SIMTEC=m

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y

#
# Miscellaneous I2C Chip support
#
CONFIG_PCF8575=m
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_GPIO=y

#
# SPI Protocol Masters
#
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y

#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_XILINX is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=m

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
# CONFIG_GPIO_MCP23S08 is not set
CONFIG_W1=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_WM8350_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_WATCHDOG_RTAS=y

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=y
# CONFIG_WDT_501_PCI is not set

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=y
CONFIG_TPS65010=m
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_MFD_WM8400=m
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_AB3100_CORE=y
CONFIG_EZX_PCAP=y
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
CONFIG_DAB=y
CONFIG_USB_DABUSB=y

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_MGA=m
CONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_DA903X is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
# CONFIG_SND_SEQ_HRTIMER_DEFAULT is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_PCI is not set
CONFIG_SND_PPC=y
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=y
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_AIRCABLE=m
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
CONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_VST=m
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y

#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_SDHCI_OF=m
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_SPI is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set

#
# LED drivers
#

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_DEBUG_VERBOSE is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_PASEMI is not set
# CONFIG_EDAC_CELL is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_TWL4030 is not set
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=y

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_DS3234=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=m
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=m
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_SMX=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
# CONFIG_STAGING is not set

#
# File systems
#
CONFIG_FS_POSIX_ACL=y
# CONFIG_FSNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
# CONFIG_CRC32 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLQB_DEBUG=y
# CONFIG_SLQB_DEBUG_ON is not set
# CONFIG_SLQB_SYSFS is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SCHED_TRACER is not set
CONFIG_ENABLE_CONTEXT_SWITCH_TRACER=y
CONFIG_ENABLE_EVENT_TRACING=y
CONFIG_BOOT_TRACER=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_KMEMTRACE=y
CONFIG_WORKQUEUE_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_MARKERS is not set
CONFIG_SAMPLE_TRACEPOINTS=m
# CONFIG_SAMPLE_TRACE_EVENTS is not set
CONFIG_SAMPLE_KOBJECT=m
CONFIG_SAMPLE_KPROBES=m
CONFIG_SAMPLE_KRETPROBES=m
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_HCALL_STATS=y
CONFIG_PPC_EMULATED_STATS=y
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_EARLY_DEBUG_LPAR=y
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_TOMOYO=y
CONFIG_KEYS_COMPAT=y
CONFIG_CRYPTO=m

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_VIRTUALIZATION=y
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_BALLOON=m
==============================