* ath9k and 16 VAP interfaces?
@ 2018-07-27 13:35 Ben Greear
2018-07-29 14:28 ` Tom Psyborg
2018-07-30 9:40 ` michael-dev
0 siblings, 2 replies; 9+ messages in thread
From: Ben Greear @ 2018-07-27 13:35 UTC (permalink / raw)
To: linux-wireless
Hello,
Has anyone tried making ath9k able to support 16 vAP interfaces on a single
radio? I seem to recall that there were limitations regarding beacon
timers and such, and that is why the current limit is 8?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath9k and 16 VAP interfaces?
2018-07-27 13:35 ath9k and 16 VAP interfaces? Ben Greear
@ 2018-07-29 14:28 ` Tom Psyborg
2018-07-30 9:40 ` michael-dev
1 sibling, 0 replies; 9+ messages in thread
From: Tom Psyborg @ 2018-07-29 14:28 UTC (permalink / raw)
To: Ben Greear; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 452 bytes --]
some people claim it is hardware limit
On 27 July 2018 at 15:35, Ben Greear <greearb@candelatech.com> wrote:
> Hello,
>
> Has anyone tried making ath9k able to support 16 vAP interfaces on a single
> radio? I seem to recall that there were limitations regarding beacon
> timers and such, and that is why the current limit is 8?
>
> Thanks,
> Ben
>
> --
> Ben Greear <greearb@candelatech.com>
> Candela Technologies Inc http://www.candelatech.com
>
[-- Attachment #2: Type: text/html, Size: 992 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath9k and 16 VAP interfaces?
2018-07-27 13:35 ath9k and 16 VAP interfaces? Ben Greear
2018-07-29 14:28 ` Tom Psyborg
@ 2018-07-30 9:40 ` michael-dev
2018-07-30 11:13 ` Matthias May
1 sibling, 1 reply; 9+ messages in thread
From: michael-dev @ 2018-07-30 9:40 UTC (permalink / raw)
To: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 617 bytes --]
Do you mean AP interfaces as required for multiple BSS/SSIDs?
I'm running a patched ath9k to have hostapd run >8 BSS on a single radio.
It works fine since years.
Regards,
M. Braun
Am 27. Juli 2018 15:35:28 MESZ schrieb Ben Greear <greearb@candelatech.com>:
>Hello,
>
>Has anyone tried making ath9k able to support 16 vAP interfaces on a
>single
>radio? I seem to recall that there were limitations regarding beacon
>timers and such, and that is why the current limit is 8?
>
>Thanks,
>Ben
>
>--
>Ben Greear <greearb@candelatech.com>
>Candela Technologies Inc http://www.candelatech.com
[-- Attachment #2: Type: text/html, Size: 803 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath9k and 16 VAP interfaces?
2018-07-30 9:40 ` michael-dev
@ 2018-07-30 11:13 ` Matthias May
2018-07-30 14:34 ` Ben Greear
0 siblings, 1 reply; 9+ messages in thread
From: Matthias May @ 2018-07-30 11:13 UTC (permalink / raw)
To: michael-dev, linux-wireless
On 30/07/18 11:40, michael-dev@fami-braun.de wrote:
> Do you mean AP interfaces as required for multiple BSS/SSIDs?
>
> I'm running a patched ath9k to have hostapd run >8 BSS on a single radio.
> It works fine since years.
>
> Regards,
> M. Braun
>
>
> Am 27. Juli 2018 15:35:28 MESZ schrieb Ben Greear <greearb@candelatech.com>:
>> Hello,
>>
>> Has anyone tried making ath9k able to support 16 vAP interfaces on a
>> single
>> radio? I seem to recall that there were limitations regarding beacon
>> timers and such, and that is why the current limit is 8?
>>
>> Thanks,
>> Ben
>>
>> --
>> Ben Greear <greearb@candelatech.com>
>> Candela Technologies Inc http://www.candelatech.com
>
Are these patches available somewhere?
I'm interested to play with them :)
BR
Matthias
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath9k and 16 VAP interfaces?
2018-07-30 11:13 ` Matthias May
@ 2018-07-30 14:34 ` Ben Greear
2018-07-30 20:04 ` Tom Psyborg
2018-08-05 18:18 ` michael-dev
0 siblings, 2 replies; 9+ messages in thread
From: Ben Greear @ 2018-07-30 14:34 UTC (permalink / raw)
To: Matthias May, michael-dev, linux-wireless
On 07/30/2018 04:13 AM, Matthias May wrote:
> On 30/07/18 11:40, michael-dev@fami-braun.de wrote:
>> Do you mean AP interfaces as required for multiple BSS/SSIDs?
>>
>> I'm running a patched ath9k to have hostapd run >8 BSS on a single radio.
>> It works fine since years.
Yes, I'd love to see any patches you can share on this as well.
Thanks,
Ben
>>
>> Regards,
>> M. Braun
>>
>>
>> Am 27. Juli 2018 15:35:28 MESZ schrieb Ben Greear <greearb@candelatech.com>:
>>> Hello,
>>>
>>> Has anyone tried making ath9k able to support 16 vAP interfaces on a
>>> single
>>> radio? I seem to recall that there were limitations regarding beacon
>>> timers and such, and that is why the current limit is 8?
>>>
>>> Thanks,
>>> Ben
>>>
>>> --
>>> Ben Greear <greearb@candelatech.com>
>>> Candela Technologies Inc http://www.candelatech.com
>>
>
> Are these patches available somewhere?
> I'm interested to play with them :)
>
> BR
> Matthias
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath9k and 16 VAP interfaces?
2018-07-30 14:34 ` Ben Greear
@ 2018-07-30 20:04 ` Tom Psyborg
2018-07-31 7:45 ` Sebastian Gottschall
2018-08-05 18:18 ` michael-dev
1 sibling, 1 reply; 9+ messages in thread
From: Tom Psyborg @ 2018-07-30 20:04 UTC (permalink / raw)
To: Ben Greear; +Cc: Matthias May, michael-dev, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 1267 bytes --]
this is how i enabled it on htc target:
https://github.com/torvalds/linux/pull/574
On 30 July 2018 at 16:34, Ben Greear <greearb@candelatech.com> wrote:
>
>
> On 07/30/2018 04:13 AM, Matthias May wrote:
>
>> On 30/07/18 11:40, michael-dev@fami-braun.de wrote:
>>
>>> Do you mean AP interfaces as required for multiple BSS/SSIDs?
>>>
>>> I'm running a patched ath9k to have hostapd run >8 BSS on a single radio.
>>> It works fine since years.
>>>
>>
> Yes, I'd love to see any patches you can share on this as well.
>
> Thanks,
> Ben
>
>
>
>>> Regards,
>>> M. Braun
>>>
>>>
>>> Am 27. Juli 2018 15:35:28 MESZ schrieb Ben Greear <
>>> greearb@candelatech.com>:
>>>
>>>> Hello,
>>>>
>>>> Has anyone tried making ath9k able to support 16 vAP interfaces on a
>>>> single
>>>> radio? I seem to recall that there were limitations regarding beacon
>>>> timers and such, and that is why the current limit is 8?
>>>>
>>>> Thanks,
>>>> Ben
>>>>
>>>> --
>>>> Ben Greear <greearb@candelatech.com>
>>>> Candela Technologies Inc http://www.candelatech.com
>>>>
>>>
>>>
>> Are these patches available somewhere?
>> I'm interested to play with them :)
>>
>> BR
>> Matthias
>>
>>
> --
> Ben Greear <greearb@candelatech.com>
> Candela Technologies Inc http://www.candelatech.com
>
[-- Attachment #2: Type: text/html, Size: 2847 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath9k and 16 VAP interfaces?
2018-07-30 20:04 ` Tom Psyborg
@ 2018-07-31 7:45 ` Sebastian Gottschall
0 siblings, 0 replies; 9+ messages in thread
From: Sebastian Gottschall @ 2018-07-31 7:45 UTC (permalink / raw)
To: Tom Psyborg, Ben Greear; +Cc: Matthias May, michael-dev, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 2434 bytes --]
for standard ath9k. (non htc) the following is just enough
Index: init.c
===================================================================
--- init.c (revision 4145)
+++ init.c (working copy)
@@ -735,7 +735,7 @@
static const struct ieee80211_iface_limit if_limits[] = {
{ .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) },
- { .max = 8, .types =
+ { .max = 16, .types =
#ifdef CPTCFG_MAC80211_MESH
BIT(NL80211_IFTYPE_MESH_POINT) |
#endif
but for sure i havent tested it
Am 30.07.2018 um 22:04 schrieb Tom Psyborg:
> this is how i enabled it on htc target:
> https://github.com/torvalds/linux/pull/574
>
> On 30 July 2018 at 16:34, Ben Greear <greearb@candelatech.com
> <mailto:greearb@candelatech.com>> wrote:
>
>
>
> On 07/30/2018 04:13 AM, Matthias May wrote:
>
> On 30/07/18 11:40, michael-dev@fami-braun.de
> <mailto:michael-dev@fami-braun.de> wrote:
>
> Do you mean AP interfaces as required for multiple BSS/SSIDs?
>
> I'm running a patched ath9k to have hostapd run >8 BSS on
> a single radio.
> It works fine since years.
>
>
> Yes, I'd love to see any patches you can share on this as well.
>
> Thanks,
> Ben
>
>
>
> Regards,
> M. Braun
>
>
> Am 27. Juli 2018 15:35:28 MESZ schrieb Ben Greear
> <greearb@candelatech.com <mailto:greearb@candelatech.com>>:
>
> Hello,
>
> Has anyone tried making ath9k able to support 16 vAP
> interfaces on a
> single
> radio? I seem to recall that there were limitations
> regarding beacon
> timers and such, and that is why the current limit is 8?
>
> Thanks,
> Ben
>
> --
> Ben Greear <greearb@candelatech.com
> <mailto:greearb@candelatech.com>>
> Candela Technologies Inc http://www.candelatech.com
>
>
>
> Are these patches available somewhere?
> I'm interested to play with them :)
>
> BR
> Matthias
>
>
> --
> Ben Greear <greearb@candelatech.com <mailto:greearb@candelatech.com>>
> Candela Technologies Inc http://www.candelatech.com
>
>
[-- Attachment #2: Type: text/html, Size: 5959 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath9k and 16 VAP interfaces?
2018-07-30 14:34 ` Ben Greear
2018-07-30 20:04 ` Tom Psyborg
@ 2018-08-05 18:18 ` michael-dev
2018-10-04 17:08 ` Ben Greear
1 sibling, 1 reply; 9+ messages in thread
From: michael-dev @ 2018-08-05 18:18 UTC (permalink / raw)
To: Ben Greear; +Cc: Matthias May, linux-wireless
Hi,
I'm using [1]. I was seeing some trouble with powersave + broadcasts, so
I added [2], so that the queue would get empty faster.
Regards,
M. Braun
[1]
http://git.fem.tu-ilmenau.de/?p=fem-wlan.git;a=blob;f=package/kernel/mac80211/patches/911-more-ap-interfaces.patch;h=873a6cb7bdb8a7462ffd07c1a50fc87c580f223d;hb=refs/heads/femwlan_stage2.kernel4.9
[2]
http://git.fem.tu-ilmenau.de/?p=fem-wlan.git;a=blob;f=package/kernel/mac80211/patches/915-use-more-time-for-multicast.patch;h=05d7fb6c2567e1abdef63a4d01f02df7f8501630;hb=refs/heads/femwlan_stage2.kernel4.9
Am 30.07.2018 16:34, schrieb Ben Greear:
> On 07/30/2018 04:13 AM, Matthias May wrote:
>> On 30/07/18 11:40, michael-dev@fami-braun.de wrote:
>>> Do you mean AP interfaces as required for multiple BSS/SSIDs?
>>>
>>> I'm running a patched ath9k to have hostapd run >8 BSS on a single
>>> radio.
>>> It works fine since years.
>
> Yes, I'd love to see any patches you can share on this as well.
>
> Thanks,
> Ben
>
>>>
>>> Regards,
>>> M. Braun
>>>
>>>
>>> Am 27. Juli 2018 15:35:28 MESZ schrieb Ben Greear
>>> <greearb@candelatech.com>:
>>>> Hello,
>>>>
>>>> Has anyone tried making ath9k able to support 16 vAP interfaces on a
>>>> single
>>>> radio? I seem to recall that there were limitations regarding
>>>> beacon
>>>> timers and such, and that is why the current limit is 8?
>>>>
>>>> Thanks,
>>>> Ben
>>>>
>>>> --
>>>> Ben Greear <greearb@candelatech.com>
>>>> Candela Technologies Inc http://www.candelatech.com
>>>
>>
>> Are these patches available somewhere?
>> I'm interested to play with them :)
>>
>> BR
>> Matthias
>>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath9k and 16 VAP interfaces?
2018-08-05 18:18 ` michael-dev
@ 2018-10-04 17:08 ` Ben Greear
0 siblings, 0 replies; 9+ messages in thread
From: Ben Greear @ 2018-10-04 17:08 UTC (permalink / raw)
To: michael-dev; +Cc: Matthias May, linux-wireless
Hello,
I'm finally getting around to trying this.
One thing, the second patch won't compile due to missing ath9k_set_moredata method.
I see it is implemented here:
http://git.fem.tu-ilmenau.de/?p=fem-wlan.git;a=blob;f=package/kernel/mac80211/patches/310-ath9k-fix-moredata-bit-in-PS-buffered-frame-release.patch;h=b2a74ccbacb29115bede4806006f3265f54cb31c;hb=refs/heads/femwlan_stage2.kernel4.9
I guess I should apply this one...maybe more?
Any idea if any of these patches should be submitted upstream?
Thanks,
Ben
On 08/05/2018 11:18 AM, michael-dev wrote:
> Hi,
>
> I'm using [1]. I was seeing some trouble with powersave + broadcasts, so I added [2], so that the queue would get empty faster.
>
> Regards,
> M. Braun
>
>
> [1]
> http://git.fem.tu-ilmenau.de/?p=fem-wlan.git;a=blob;f=package/kernel/mac80211/patches/911-more-ap-interfaces.patch;h=873a6cb7bdb8a7462ffd07c1a50fc87c580f223d;hb=refs/heads/femwlan_stage2.kernel4.9
>
> [2]
> http://git.fem.tu-ilmenau.de/?p=fem-wlan.git;a=blob;f=package/kernel/mac80211/patches/915-use-more-time-for-multicast.patch;h=05d7fb6c2567e1abdef63a4d01f02df7f8501630;hb=refs/heads/femwlan_stage2.kernel4.9
>
> Am 30.07.2018 16:34, schrieb Ben Greear:
>> On 07/30/2018 04:13 AM, Matthias May wrote:
>>> On 30/07/18 11:40, michael-dev@fami-braun.de wrote:
>>>> Do you mean AP interfaces as required for multiple BSS/SSIDs?
>>>>
>>>> I'm running a patched ath9k to have hostapd run >8 BSS on a single radio.
>>>> It works fine since years.
>>
>> Yes, I'd love to see any patches you can share on this as well.
>>
>> Thanks,
>> Ben
>>
>>>>
>>>> Regards,
>>>> M. Braun
>>>>
>>>>
>>>> Am 27. Juli 2018 15:35:28 MESZ schrieb Ben Greear <greearb@candelatech.com>:
>>>>> Hello,
>>>>>
>>>>> Has anyone tried making ath9k able to support 16 vAP interfaces on a
>>>>> single
>>>>> radio? I seem to recall that there were limitations regarding beacon
>>>>> timers and such, and that is why the current limit is 8?
>>>>>
>>>>> Thanks,
>>>>> Ben
>>>>>
>>>>> --
>>>>> Ben Greear <greearb@candelatech.com>
>>>>> Candela Technologies Inc http://www.candelatech.com
>>>>
>>>
>>> Are these patches available somewhere?
>>> I'm interested to play with them :)
>>>
>>> BR
>>> Matthias
>>>
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2018-10-04 17:08 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-27 13:35 ath9k and 16 VAP interfaces? Ben Greear
2018-07-29 14:28 ` Tom Psyborg
2018-07-30 9:40 ` michael-dev
2018-07-30 11:13 ` Matthias May
2018-07-30 14:34 ` Ben Greear
2018-07-30 20:04 ` Tom Psyborg
2018-07-31 7:45 ` Sebastian Gottschall
2018-08-05 18:18 ` michael-dev
2018-10-04 17:08 ` Ben Greear
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.