All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Christian König" <ckoenig.leichtzumerken@gmail.com>
To: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>,
	"Daniel Vetter" <daniel@ffwll.ch>,
	"Dave Airlie" <airlied@gmail.com>
Cc: "Thomas Hellström (Intel)" <thomas_os@shipmail.org>,
	"Intel Graphics Development" <intel-gfx@lists.freedesktop.org>,
	"DRI Development" <dri-devel@lists.freedesktop.org>,
	"Matthew Auld" <matthew.auld@intel.com>
Subject: Re: [Intel-gfx] Merging TTM branches through the Intel tree?
Date: Fri, 4 Jun 2021 16:06:02 +0200	[thread overview]
Message-ID: <fd0fa98b-876d-d3e6-0b67-9537d944d33f@gmail.com> (raw)
In-Reply-To: <4e465ada6f8b1a8b76fea782adcf3043630efa5e.camel@linux.intel.com>

Am 04.06.21 um 16:03 schrieb Thomas Hellström:
> On Fri, 2021-06-04 at 15:38 +0200, Christian König wrote:
>> Am 04.06.21 um 11:12 schrieb Daniel Vetter:
>>> On Fri, Jun 04, 2021 at 11:01:40AM +0200, Thomas Hellström wrote:
>>>> On 6/4/21 9:51 AM, Christian König wrote:
>>>>> Am 03.06.21 um 09:36 schrieb Daniel Vetter:
>>>>>> On Thu, Jun 3, 2021 at 8:50 AM Thomas Hellström
>>>>>> <thomas.hellstrom@linux.intel.com> wrote:
>>>>>>> On 6/2/21 8:40 PM, Daniel Vetter wrote:
>>>>>>>> On Wed, Jun 02, 2021 at 11:48:41AM +0200, Christian König
>>>>>>>> wrote:
>>>>>>>>> Am 02.06.21 um 11:16 schrieb Thomas Hellström (Intel):
>>>>>>>>>> On 6/2/21 10:32 AM, Christian König wrote:
>>>>>>>>>>> Uff I'm just waiting for feedback from Philip to
>>>>>>>>>>> merge a large patch
>>>>>>>>>>> set for TTM through drm-misc-next.
>>>>>>>>>>>
>>>>>>>>>>> I'm pretty sure we will run into merge conflicts if
>>>>>>>>>>> you try to push
>>>>>>>>>>> your changes through the Intel tree.
>>>>>>>>>>>
>>>>>>>>>>> Christian.
>>>>>>>>>> OK, so what would be the best approach here?, Adding
>>>>>>>>>> the TTM patches to
>>>>>>>>>> drm-misc-next when your set has landed?
>>>>>>>>> I think I will send out out my set to Matthew once more
>>>>>>>>> for review, then
>>>>>>>>> push the common TTM stuff to drm-misc-next as much as
>>>>>>>>> possible.
>>>>>>>>>
>>>>>>>>> Then you should be able to land your stuff to
>>>>>>>>> drm-misc-next and rebase on
>>>>>>>>> the end result.
>>>>>>>>>
>>>>>>>>> Just need to note to David that drm-misc-next should be
>>>>>>>>> merged to drm-next
>>>>>>>>> before the Intel patches depending on that stuff land
>>>>>>>>> as well.
>>>>>>>> Other option (because the backmerges tend to be slow) is
>>>>>>>> a
>>>>>>>> topic branch,
>>>>>>>> and we just eat/resolve the conflicts in both drm-misc-
>>>>>>>> next and
>>>>>>>> drm-intel-gt-next in the merge commit. If it's not too
>>>>>>>> bad (I haven't
>>>>>>>> looked at what exactly we need for the i915 side from ttm
>>>>>>>> in detail).
>>>>>>>>
>>>>>>>> But also often figuring out the topic branch logistics
>>>>>>>> takes
>>>>>>>> longer than
>>>>>>>> just merging to drm-misc-next as the patches get ready.
>>>>>>>> -Daniel
>>>>>>> Daniel: So the thing we need to get into TTM is the
>>>>>>> iterator-based
>>>>>>> move_memcpy which is more adaptable than the current one
>>>>>>> and needed to
>>>>>>> support non-linear lmem buffers, some bug-fixes and minor
>>>>>>> changes to be
>>>>>>> able to keep our short-term-pinning while on the LRU. A
>>>>>>> necessary evil.
>>>>>>>
>>>>>>> Christian: it looks like you have landed some TTM changes
>>>>>>> already, in
>>>>>>> particular the &bo->mem -> bo->resource change which is the
>>>>>>> main
>>>>>>> conflict I think.
>>>>> Yes, I thought that pushing this with Matthew rb should solve
>>>>> at least a
>>>>> bit of the conflict.
>>>>>
>>>>>>> Is the 10 patches self-allocation series the main
>>>>>>> remaining part?
>>>>> Yes, exactly. I only need Matthew's, Daniel's or your ok and
>>>>> I'm good to
>>>>> go as well
>>>>>
>>>>>>> That will probably cause some conflicts with already
>>>>>>> pushed i915 TTM setup code, but otherwise will not conflict
>>>>>>> with the
>>>>>>> rest of the TTM code I think, which should make it possible
>>>>>>> to bring in
>>>>>>> our TTM changes after conflict resolution with what you've
>>>>>>> already
>>>>>>> pushed. The memcpy code is pretty self-contained.
>>>>>> I think in that case topic branch on top of drm-next (once
>>>>>> the ttm
>>>>>> bits we conflict with are there) is probably best, and then
>>>>>> pull that
>>>>>> into drm-misc-next and drm-intel-gt-next. Merge window freeze
>>>>>> is also
>>>>>> approach, so without topic branch we'd be stuck until like -
>>>>>> rc2 when
>>>>>> drm-next reopens. I guess Maarten can do the topic branch
>>>>>> logistics in
>>>>>> drm-misc.git for this.
>>>>> That approach sounds good to me as well.
>>>>>
>>>>> The amdgpu branch had some merge conflicts as well, but nothing
>>>>> we
>>>>> couldn't fix.
>>>> OK, so this is going to be a little tricky, I guess.
>>>>
>>>>   From what I can tell, the memcpy TTM stuff is resolved locally
>>>> and can be
>>>> merged to drm-misc-next immediately. It might have a very minor
>>>> conflict
>>>> with your 10 patches I think, if any.
>>>>
>>>> Your 10 patches will conflict slightly with current drm-intel-gt-
>>>> next I
>>>> think.
>>>>
>>>> Remaining intel patches will conflict only with current drm-misc-
>>>> next.
>>>>
>>>> So We could have pull order
>>>>
>>>> - drm-misc-next up to bot not including your 10 patches,
>>>> - drm-intel-gt-next
>>>> - drm-misc-next from your 10 paches and onwards,
>>>> - Intel's ttm enablement topic branch.
>>> If it's just slight conflicts then I wouldn't bother with careful
>>> merge
>>> order. Because if we do this we can get around to the i915 ttm
>>> topic
>>> branch only when we're back to -rc2.
>> I've just pushed the remaining 10 patches to drm-misc-next and ran
>> into
>> minor merge conflicts in drm-tip.
>>
>> I'm working on this, but I'm not very familiar with drm-tip handling.
>>
>> Christian.
> Np, I'll hold off until Monday.

Ok I've fixed up drm-tip for amdgpu, but there are also merge conflicts 
for i915.

Can you handle those? Doesn't looks to hard, but I would prefer not to 
touch code I can't test.

Christian.

>
> /Thomas
>
>


WARNING: multiple messages have this Message-ID (diff)
From: "Christian König" <ckoenig.leichtzumerken@gmail.com>
To: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>,
	"Daniel Vetter" <daniel@ffwll.ch>,
	"Dave Airlie" <airlied@gmail.com>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
	DRI Development <dri-devel@lists.freedesktop.org>,
	Matthew Auld <matthew.auld@intel.com>
Subject: Re: [Intel-gfx] Merging TTM branches through the Intel tree?
Date: Fri, 4 Jun 2021 16:06:02 +0200	[thread overview]
Message-ID: <fd0fa98b-876d-d3e6-0b67-9537d944d33f@gmail.com> (raw)
In-Reply-To: <4e465ada6f8b1a8b76fea782adcf3043630efa5e.camel@linux.intel.com>

Am 04.06.21 um 16:03 schrieb Thomas Hellström:
> On Fri, 2021-06-04 at 15:38 +0200, Christian König wrote:
>> Am 04.06.21 um 11:12 schrieb Daniel Vetter:
>>> On Fri, Jun 04, 2021 at 11:01:40AM +0200, Thomas Hellström wrote:
>>>> On 6/4/21 9:51 AM, Christian König wrote:
>>>>> Am 03.06.21 um 09:36 schrieb Daniel Vetter:
>>>>>> On Thu, Jun 3, 2021 at 8:50 AM Thomas Hellström
>>>>>> <thomas.hellstrom@linux.intel.com> wrote:
>>>>>>> On 6/2/21 8:40 PM, Daniel Vetter wrote:
>>>>>>>> On Wed, Jun 02, 2021 at 11:48:41AM +0200, Christian König
>>>>>>>> wrote:
>>>>>>>>> Am 02.06.21 um 11:16 schrieb Thomas Hellström (Intel):
>>>>>>>>>> On 6/2/21 10:32 AM, Christian König wrote:
>>>>>>>>>>> Uff I'm just waiting for feedback from Philip to
>>>>>>>>>>> merge a large patch
>>>>>>>>>>> set for TTM through drm-misc-next.
>>>>>>>>>>>
>>>>>>>>>>> I'm pretty sure we will run into merge conflicts if
>>>>>>>>>>> you try to push
>>>>>>>>>>> your changes through the Intel tree.
>>>>>>>>>>>
>>>>>>>>>>> Christian.
>>>>>>>>>> OK, so what would be the best approach here?, Adding
>>>>>>>>>> the TTM patches to
>>>>>>>>>> drm-misc-next when your set has landed?
>>>>>>>>> I think I will send out out my set to Matthew once more
>>>>>>>>> for review, then
>>>>>>>>> push the common TTM stuff to drm-misc-next as much as
>>>>>>>>> possible.
>>>>>>>>>
>>>>>>>>> Then you should be able to land your stuff to
>>>>>>>>> drm-misc-next and rebase on
>>>>>>>>> the end result.
>>>>>>>>>
>>>>>>>>> Just need to note to David that drm-misc-next should be
>>>>>>>>> merged to drm-next
>>>>>>>>> before the Intel patches depending on that stuff land
>>>>>>>>> as well.
>>>>>>>> Other option (because the backmerges tend to be slow) is
>>>>>>>> a
>>>>>>>> topic branch,
>>>>>>>> and we just eat/resolve the conflicts in both drm-misc-
>>>>>>>> next and
>>>>>>>> drm-intel-gt-next in the merge commit. If it's not too
>>>>>>>> bad (I haven't
>>>>>>>> looked at what exactly we need for the i915 side from ttm
>>>>>>>> in detail).
>>>>>>>>
>>>>>>>> But also often figuring out the topic branch logistics
>>>>>>>> takes
>>>>>>>> longer than
>>>>>>>> just merging to drm-misc-next as the patches get ready.
>>>>>>>> -Daniel
>>>>>>> Daniel: So the thing we need to get into TTM is the
>>>>>>> iterator-based
>>>>>>> move_memcpy which is more adaptable than the current one
>>>>>>> and needed to
>>>>>>> support non-linear lmem buffers, some bug-fixes and minor
>>>>>>> changes to be
>>>>>>> able to keep our short-term-pinning while on the LRU. A
>>>>>>> necessary evil.
>>>>>>>
>>>>>>> Christian: it looks like you have landed some TTM changes
>>>>>>> already, in
>>>>>>> particular the &bo->mem -> bo->resource change which is the
>>>>>>> main
>>>>>>> conflict I think.
>>>>> Yes, I thought that pushing this with Matthew rb should solve
>>>>> at least a
>>>>> bit of the conflict.
>>>>>
>>>>>>> Is the 10 patches self-allocation series the main
>>>>>>> remaining part?
>>>>> Yes, exactly. I only need Matthew's, Daniel's or your ok and
>>>>> I'm good to
>>>>> go as well
>>>>>
>>>>>>> That will probably cause some conflicts with already
>>>>>>> pushed i915 TTM setup code, but otherwise will not conflict
>>>>>>> with the
>>>>>>> rest of the TTM code I think, which should make it possible
>>>>>>> to bring in
>>>>>>> our TTM changes after conflict resolution with what you've
>>>>>>> already
>>>>>>> pushed. The memcpy code is pretty self-contained.
>>>>>> I think in that case topic branch on top of drm-next (once
>>>>>> the ttm
>>>>>> bits we conflict with are there) is probably best, and then
>>>>>> pull that
>>>>>> into drm-misc-next and drm-intel-gt-next. Merge window freeze
>>>>>> is also
>>>>>> approach, so without topic branch we'd be stuck until like -
>>>>>> rc2 when
>>>>>> drm-next reopens. I guess Maarten can do the topic branch
>>>>>> logistics in
>>>>>> drm-misc.git for this.
>>>>> That approach sounds good to me as well.
>>>>>
>>>>> The amdgpu branch had some merge conflicts as well, but nothing
>>>>> we
>>>>> couldn't fix.
>>>> OK, so this is going to be a little tricky, I guess.
>>>>
>>>>   From what I can tell, the memcpy TTM stuff is resolved locally
>>>> and can be
>>>> merged to drm-misc-next immediately. It might have a very minor
>>>> conflict
>>>> with your 10 patches I think, if any.
>>>>
>>>> Your 10 patches will conflict slightly with current drm-intel-gt-
>>>> next I
>>>> think.
>>>>
>>>> Remaining intel patches will conflict only with current drm-misc-
>>>> next.
>>>>
>>>> So We could have pull order
>>>>
>>>> - drm-misc-next up to bot not including your 10 patches,
>>>> - drm-intel-gt-next
>>>> - drm-misc-next from your 10 paches and onwards,
>>>> - Intel's ttm enablement topic branch.
>>> If it's just slight conflicts then I wouldn't bother with careful
>>> merge
>>> order. Because if we do this we can get around to the i915 ttm
>>> topic
>>> branch only when we're back to -rc2.
>> I've just pushed the remaining 10 patches to drm-misc-next and ran
>> into
>> minor merge conflicts in drm-tip.
>>
>> I'm working on this, but I'm not very familiar with drm-tip handling.
>>
>> Christian.
> Np, I'll hold off until Monday.

Ok I've fixed up drm-tip for amdgpu, but there are also merge conflicts 
for i915.

Can you handle those? Doesn't looks to hard, but I would prefer not to 
touch code I can't test.

Christian.

>
> /Thomas
>
>

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2021-06-04 14:06 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-02  8:26 Merging TTM branches through the Intel tree? Thomas Hellström
2021-06-02  8:26 ` [Intel-gfx] " Thomas Hellström
2021-06-02  8:32 ` Christian König
2021-06-02  8:32   ` [Intel-gfx] " Christian König
2021-06-02  9:16   ` Thomas Hellström (Intel)
2021-06-02  9:16     ` [Intel-gfx] " Thomas Hellström (Intel)
2021-06-02  9:48     ` Christian König
2021-06-02  9:48       ` [Intel-gfx] " Christian König
2021-06-02 18:40       ` Daniel Vetter
2021-06-02 18:40         ` Daniel Vetter
2021-06-03  6:50         ` Thomas Hellström
2021-06-03  6:50           ` Thomas Hellström
2021-06-03  7:36           ` Daniel Vetter
2021-06-03  7:36             ` Daniel Vetter
2021-06-04  7:51             ` Christian König
2021-06-04  7:51               ` Christian König
2021-06-04  9:01               ` Thomas Hellström
2021-06-04  9:01                 ` Thomas Hellström
2021-06-04  9:12                 ` Daniel Vetter
2021-06-04  9:12                   ` Daniel Vetter
2021-06-04 13:38                   ` Christian König
2021-06-04 13:38                     ` Christian König
2021-06-04 14:03                     ` Thomas Hellström
2021-06-04 14:03                       ` Thomas Hellström
2021-06-04 14:06                       ` Christian König [this message]
2021-06-04 14:06                         ` Christian König
2021-06-04 14:11                         ` Thomas Hellström
2021-06-04 14:11                           ` Thomas Hellström
2021-06-04 14:14                           ` Christian König
2021-06-04 14:14                             ` Christian König

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fd0fa98b-876d-d3e6-0b67-9537d944d33f@gmail.com \
    --to=ckoenig.leichtzumerken@gmail.com \
    --cc=airlied@gmail.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=matthew.auld@intel.com \
    --cc=thomas.hellstrom@linux.intel.com \
    --cc=thomas_os@shipmail.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.