* [PATCH net-next,v2 00/18] refactor duplicate codes in the qdisc class walk function
@ 2022-09-17 5:02 Zhengchao Shao
2022-09-19 18:31 ` Victor Nogueira
0 siblings, 1 reply; 2+ messages in thread
From: Zhengchao Shao @ 2022-09-17 5:02 UTC (permalink / raw)
To: netdev, cake, linux-kselftest, jhs, xiyou.wangcong, jiri, davem,
edumazet, kuba, pabeni, toke, vinicius.gomes, stephen, shuah,
victor
Cc: zhijianx.li, weiyongjun1, yuehaibing, shaozhengchao
The walk implementation of most qdisc class modules is basically the
same. That is, the values of count and skip are checked first. If count
is greater than or equal to skip, the registered fn function is
executed. Otherwise, increase the value of count. So the code can be
refactored.
The walk function is invoked during dump. Therefore, test cases related
to the tdc filter need to be added.
Last, thanks to Victor for his review.
Add test cases locally and perform the test. The test results are listed
below:
./tdc.py -c cake
ok 1 1212 - Create CAKE with default setting
ok 2 3281 - Create CAKE with bandwidth limit
ok 3 c940 - Create CAKE with autorate-ingress flag
ok 4 2310 - Create CAKE with rtt time
ok 5 2385 - Create CAKE with besteffort flag
ok 6 a032 - Create CAKE with diffserv8 flag
ok 7 2349 - Create CAKE with diffserv4 flag
ok 8 8472 - Create CAKE with flowblind flag
ok 9 2341 - Create CAKE with dsthost and nat flag
ok 10 5134 - Create CAKE with wash flag
ok 11 2302 - Create CAKE with flowblind and no-split-gso flag
ok 12 0768 - Create CAKE with dual-srchost and ack-filter flag
ok 13 0238 - Create CAKE with dual-dsthost and ack-filter-aggressive flag
ok 14 6572 - Create CAKE with memlimit and ptm flag
ok 15 2436 - Create CAKE with fwmark and atm flag
ok 16 3984 - Create CAKE with overhead and mpu
ok 17 5421 - Create CAKE with conservative and ingress flag
ok 18 6854 - Delete CAKE with conservative and ingress flag
ok 19 2342 - Replace CAKE with mpu
ok 20 2313 - Change CAKE with mpu
ok 21 4365 - Show CAKE class
./tdc.py -c cbq
ok 1 3460 - Create CBQ with default setting
ok 2 0592 - Create CBQ with mpu
ok 3 4684 - Create CBQ with valid cell num
ok 4 4345 - Create CBQ with invalid cell num
ok 5 4525 - Create CBQ with valid ewma
ok 6 6784 - Create CBQ with invalid ewma
ok 7 5468 - Delete CBQ with handle
ok 8 492a - Show CBQ class
./tdc.py -c cbs
ok 1 1820 - Create CBS with default setting
ok 2 1532 - Create CBS with hicredit setting
ok 3 2078 - Create CBS with locredit setting
ok 4 9271 - Create CBS with sendslope setting
ok 5 0482 - Create CBS with idleslope setting
ok 6 e8f3 - Create CBS with multiple setting
ok 7 23c9 - Replace CBS with sendslope setting
ok 8 a07a - Change CBS with idleslope setting
ok 9 43b3 - Delete CBS with handle
ok 10 9472 - Show CBS class
./tdc.py -c drr
ok 1 0385 - Create DRR with default setting
ok 2 2375 - Delete DRR with handle
ok 3 3092 - Show DRR class
./tdc.py -c dsmark
ok 1 6345 - Create DSMARK with default setting
ok 2 3462 - Create DSMARK with default_index setting
ok 3 ca95 - Create DSMARK with set_tc_index flag
ok 4 a950 - Create DSMARK with multiple setting
ok 5 4092 - Delete DSMARK with handle
ok 6 5930 - Show DSMARK class
./tdc.py -c fq_codel
ok 1 4957 - Create FQ_CODEL with default setting
ok 2 7621 - Create FQ_CODEL with limit setting
ok 3 6871 - Create FQ_CODEL with memory_limit setting
ok 4 5636 - Create FQ_CODEL with target setting
ok 5 630a - Create FQ_CODEL with interval setting
ok 6 4324 - Create FQ_CODEL with quantum setting
ok 7 b190 - Create FQ_CODEL with noecn flag
ok 8 5381 - Create FQ_CODEL with ce_threshold setting
ok 9 c9d2 - Create FQ_CODEL with drop_batch setting
ok 10 523b - Create FQ_CODEL with multiple setting
ok 11 9283 - Replace FQ_CODEL with noecn setting
ok 12 3459 - Change FQ_CODEL with limit setting
ok 13 0128 - Delete FQ_CODEL with handle
ok 14 0435 - Show FQ_CODEL class
./tdc.py -c hfsc
ok 1 3254 - Create HFSC with default setting
ok 2 0289 - Create HFSC with class sc and ul rate setting
ok 3 846a - Create HFSC with class sc umax and dmax setting
ok 4 5413 - Create HFSC with class rt and ls rate setting
ok 5 9312 - Create HFSC with class rt umax and dmax setting
ok 6 6931 - Delete HFSC with handle
ok 7 8436 - Show HFSC class
./tdc.py -c htb
ok 1 0904 - Create HTB with default setting
ok 2 3906 - Create HTB with default-N setting
ok 3 8492 - Create HTB with r2q setting
ok 4 9502 - Create HTB with direct_qlen setting
ok 5 b924 - Create HTB with class rate and burst setting
ok 6 4359 - Create HTB with class mpu setting
ok 7 9048 - Create HTB with class prio setting
ok 8 4994 - Create HTB with class ceil setting
ok 9 9523 - Create HTB with class cburst setting
ok 10 5353 - Create HTB with class mtu setting
ok 11 346a - Create HTB with class quantum setting
ok 12 303a - Delete HTB with handle
./tdc.py -c mqprio
ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues)
ok 2 453a - Delete nonexistent mqprio Qdisc
ok 3 5292 - Delete mqprio Qdisc twice
ok 4 45a9 - Add mqprio Qdisc to single-queue device
ok 5 2ba9 - Show mqprio class
./tdc.py -c multiq
ok 1 20ba - Add multiq Qdisc to multi-queue device (8 queues)
ok 2 4301 - List multiq Class
ok 3 7832 - Delete nonexistent multiq Qdisc
ok 4 2891 - Delete multiq Qdisc twice
ok 5 1329 - Add multiq Qdisc to single-queue device
./tdc.py -c netem
ok 1 cb28 - Create NETEM with default setting
ok 2 a089 - Create NETEM with limit flag
ok 3 3449 - Create NETEM with delay time
ok 4 3782 - Create NETEM with distribution and corrupt flag
ok 5 2b82 - Create NETEM with distribution and duplicate flag
ok 6 a932 - Create NETEM with distribution and loss flag
ok 7 e01a - Create NETEM with distribution and loss state flag
ok 8 ba29 - Create NETEM with loss gemodel flag
ok 9 0492 - Create NETEM with reorder flag
ok 10 7862 - Create NETEM with rate limit
ok 11 7235 - Create NETEM with multiple slot rate
ok 12 5439 - Create NETEM with multiple slot setting
ok 13 5029 - Change NETEM with loss state
ok 14 3785 - Replace NETEM with delay time
ok 15 4502 - Delete NETEM with handle
ok 16 0785 - Show NETEM class
./tdc.py -c qfq
ok 1 0582 - Create QFQ with default setting
ok 2 c9a3 - Create QFQ with class weight setting
ok 3 8452 - Create QFQ with class maxpkt setting
ok 4 d920 - Create QFQ with multiple class setting
ok 5 0548 - Delete QFQ with handle
ok 6 5901 - Show QFQ class
./tdc.py -e 0521
ok 1 0521 - Show ingress class
./tdc.py -e 1023
ok 1 1023 - Show mq class
./tdc.py -e 2410
ok 1 2410 - Show prio class
./tdc.py -e 290a
ok 1 290a - Show RED class
Zhengchao Shao (18):
net/sched: sch_api: add helper for tc qdisc walker stats dump
net/sched: use tc_qdisc_stats_dump() in qdisc
selftests/tc-testings: add selftests for cake qdisc
selftests/tc-testings: add selftests for cbq qdisc
selftests/tc-testings: add selftests for cbs qdisc
selftests/tc-testings: add selftests for drr qdisc
selftests/tc-testings: add selftests for dsmark qdisc
selftests/tc-testings: add selftests for fq_codel qdisc
selftests/tc-testings: add selftests for hfsc qdisc
selftests/tc-testings: add selftests for htb qdisc
selftests/tc-testings: add selftests for mqprio qdisc
selftests/tc-testings: add selftests for multiq qdisc
selftests/tc-testings: add selftests for netem qdisc
selftests/tc-testings: add selftests for qfq qdisc
selftests/tc-testings: add show class case for ingress qdisc
selftests/tc-testings: add show class case for mq qdisc
selftests/tc-testings: add show class case for prio qdisc
selftests/tc-testings: add show class case for red qdisc
include/net/pkt_sched.h | 13 +
net/sched/sch_atm.c | 6 +-
net/sched/sch_cake.c | 9 +-
net/sched/sch_cbq.c | 9 +-
net/sched/sch_cbs.c | 8 +-
net/sched/sch_drr.c | 9 +-
net/sched/sch_dsmark.c | 14 +-
net/sched/sch_ets.c | 9 +-
net/sched/sch_fq_codel.c | 8 +-
net/sched/sch_hfsc.c | 9 +-
net/sched/sch_htb.c | 9 +-
net/sched/sch_mq.c | 5 +-
net/sched/sch_mqprio.c | 5 +-
net/sched/sch_multiq.c | 9 +-
net/sched/sch_netem.c | 8 +-
net/sched/sch_prio.c | 9 +-
net/sched/sch_qfq.c | 9 +-
net/sched/sch_red.c | 7 +-
net/sched/sch_sfb.c | 7 +-
net/sched/sch_sfq.c | 8 +-
net/sched/sch_skbprio.c | 9 +-
net/sched/sch_taprio.c | 5 +-
net/sched/sch_tbf.c | 7 +-
.../tc-testing/tc-tests/qdiscs/cake.json | 487 ++++++++++++++++++
.../tc-testing/tc-tests/qdiscs/cbq.json | 184 +++++++
.../tc-testing/tc-tests/qdiscs/cbs.json | 234 +++++++++
.../tc-testing/tc-tests/qdiscs/drr.json | 71 +++
.../tc-testing/tc-tests/qdiscs/dsmark.json | 140 +++++
.../tc-testing/tc-tests/qdiscs/fq_codel.json | 326 ++++++++++++
.../tc-testing/tc-tests/qdiscs/hfsc.json | 167 ++++++
.../tc-testing/tc-tests/qdiscs/htb.json | 285 ++++++++++
.../tc-testing/tc-tests/qdiscs/ingress.json | 20 +
.../tc-testing/tc-tests/qdiscs/mq.json | 24 +-
.../tc-testing/tc-tests/qdiscs/mqprio.json | 114 ++++
.../tc-testing/tc-tests/qdiscs/multiq.json | 114 ++++
.../tc-testing/tc-tests/qdiscs/netem.json | 372 +++++++++++++
.../tc-testing/tc-tests/qdiscs/prio.json | 20 +
.../tc-testing/tc-tests/qdiscs/qfq.json | 145 ++++++
.../tc-testing/tc-tests/qdiscs/red.json | 23 +
39 files changed, 2769 insertions(+), 148 deletions(-)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cake.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbq.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbs.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/drr.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dsmark.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_codel.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hfsc.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/htb.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/mqprio.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/multiq.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH net-next,v2 00/18] refactor duplicate codes in the qdisc class walk function
2022-09-17 5:02 [PATCH net-next,v2 00/18] refactor duplicate codes in the qdisc class walk function Zhengchao Shao
@ 2022-09-19 18:31 ` Victor Nogueira
0 siblings, 0 replies; 2+ messages in thread
From: Victor Nogueira @ 2022-09-19 18:31 UTC (permalink / raw)
To: Zhengchao Shao, netdev, linux-kselftest, jhs, xiyou.wangcong,
jiri, davem, edumazet, kuba, pabeni, toke, vinicius.gomes,
stephen, shuah
Cc: zhijianx.li, weiyongjun1, yuehaibing
On 17/09/2022 02:02, Zhengchao Shao wrote:
> The walk implementation of most qdisc class modules is basically the
> same. That is, the values of count and skip are checked first. If count
> is greater than or equal to skip, the registered fn function is
> executed. Otherwise, increase the value of count. So the code can be
> refactored.
>
> The walk function is invoked during dump. Therefore, test cases related
> to the tdc filter need to be added.
>
> Last, thanks to Victor for his review.
>
> Add test cases locally and perform the test. The test results are listed
> below:
>
> ./tdc.py -c cake
> ok 1 1212 - Create CAKE with default setting
> ok 2 3281 - Create CAKE with bandwidth limit
> ok 3 c940 - Create CAKE with autorate-ingress flag
> ok 4 2310 - Create CAKE with rtt time
> ok 5 2385 - Create CAKE with besteffort flag
> ok 6 a032 - Create CAKE with diffserv8 flag
> ok 7 2349 - Create CAKE with diffserv4 flag
> ok 8 8472 - Create CAKE with flowblind flag
> ok 9 2341 - Create CAKE with dsthost and nat flag
> ok 10 5134 - Create CAKE with wash flag
> ok 11 2302 - Create CAKE with flowblind and no-split-gso flag
> ok 12 0768 - Create CAKE with dual-srchost and ack-filter flag
> ok 13 0238 - Create CAKE with dual-dsthost and ack-filter-aggressive flag
> ok 14 6572 - Create CAKE with memlimit and ptm flag
> ok 15 2436 - Create CAKE with fwmark and atm flag
> ok 16 3984 - Create CAKE with overhead and mpu
> ok 17 5421 - Create CAKE with conservative and ingress flag
> ok 18 6854 - Delete CAKE with conservative and ingress flag
> ok 19 2342 - Replace CAKE with mpu
> ok 20 2313 - Change CAKE with mpu
> ok 21 4365 - Show CAKE class
>
> ./tdc.py -c cbq
> ok 1 3460 - Create CBQ with default setting
> ok 2 0592 - Create CBQ with mpu
> ok 3 4684 - Create CBQ with valid cell num
> ok 4 4345 - Create CBQ with invalid cell num
> ok 5 4525 - Create CBQ with valid ewma
> ok 6 6784 - Create CBQ with invalid ewma
> ok 7 5468 - Delete CBQ with handle
> ok 8 492a - Show CBQ class
>
> ./tdc.py -c cbs
> ok 1 1820 - Create CBS with default setting
> ok 2 1532 - Create CBS with hicredit setting
> ok 3 2078 - Create CBS with locredit setting
> ok 4 9271 - Create CBS with sendslope setting
> ok 5 0482 - Create CBS with idleslope setting
> ok 6 e8f3 - Create CBS with multiple setting
> ok 7 23c9 - Replace CBS with sendslope setting
> ok 8 a07a - Change CBS with idleslope setting
> ok 9 43b3 - Delete CBS with handle
> ok 10 9472 - Show CBS class
>
> ./tdc.py -c drr
> ok 1 0385 - Create DRR with default setting
> ok 2 2375 - Delete DRR with handle
> ok 3 3092 - Show DRR class
>
> ./tdc.py -c dsmark
> ok 1 6345 - Create DSMARK with default setting
> ok 2 3462 - Create DSMARK with default_index setting
> ok 3 ca95 - Create DSMARK with set_tc_index flag
> ok 4 a950 - Create DSMARK with multiple setting
> ok 5 4092 - Delete DSMARK with handle
> ok 6 5930 - Show DSMARK class
>
> ./tdc.py -c fq_codel
> ok 1 4957 - Create FQ_CODEL with default setting
> ok 2 7621 - Create FQ_CODEL with limit setting
> ok 3 6871 - Create FQ_CODEL with memory_limit setting
> ok 4 5636 - Create FQ_CODEL with target setting
> ok 5 630a - Create FQ_CODEL with interval setting
> ok 6 4324 - Create FQ_CODEL with quantum setting
> ok 7 b190 - Create FQ_CODEL with noecn flag
> ok 8 5381 - Create FQ_CODEL with ce_threshold setting
> ok 9 c9d2 - Create FQ_CODEL with drop_batch setting
> ok 10 523b - Create FQ_CODEL with multiple setting
> ok 11 9283 - Replace FQ_CODEL with noecn setting
> ok 12 3459 - Change FQ_CODEL with limit setting
> ok 13 0128 - Delete FQ_CODEL with handle
> ok 14 0435 - Show FQ_CODEL class
>
> ./tdc.py -c hfsc
> ok 1 3254 - Create HFSC with default setting
> ok 2 0289 - Create HFSC with class sc and ul rate setting
> ok 3 846a - Create HFSC with class sc umax and dmax setting
> ok 4 5413 - Create HFSC with class rt and ls rate setting
> ok 5 9312 - Create HFSC with class rt umax and dmax setting
> ok 6 6931 - Delete HFSC with handle
> ok 7 8436 - Show HFSC class
>
> ./tdc.py -c htb
> ok 1 0904 - Create HTB with default setting
> ok 2 3906 - Create HTB with default-N setting
> ok 3 8492 - Create HTB with r2q setting
> ok 4 9502 - Create HTB with direct_qlen setting
> ok 5 b924 - Create HTB with class rate and burst setting
> ok 6 4359 - Create HTB with class mpu setting
> ok 7 9048 - Create HTB with class prio setting
> ok 8 4994 - Create HTB with class ceil setting
> ok 9 9523 - Create HTB with class cburst setting
> ok 10 5353 - Create HTB with class mtu setting
> ok 11 346a - Create HTB with class quantum setting
> ok 12 303a - Delete HTB with handle
>
> ./tdc.py -c mqprio
> ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues)
> ok 2 453a - Delete nonexistent mqprio Qdisc
> ok 3 5292 - Delete mqprio Qdisc twice
> ok 4 45a9 - Add mqprio Qdisc to single-queue device
> ok 5 2ba9 - Show mqprio class
>
> ./tdc.py -c multiq
> ok 1 20ba - Add multiq Qdisc to multi-queue device (8 queues)
> ok 2 4301 - List multiq Class
> ok 3 7832 - Delete nonexistent multiq Qdisc
> ok 4 2891 - Delete multiq Qdisc twice
> ok 5 1329 - Add multiq Qdisc to single-queue device
>
> ./tdc.py -c netem
> ok 1 cb28 - Create NETEM with default setting
> ok 2 a089 - Create NETEM with limit flag
> ok 3 3449 - Create NETEM with delay time
> ok 4 3782 - Create NETEM with distribution and corrupt flag
> ok 5 2b82 - Create NETEM with distribution and duplicate flag
> ok 6 a932 - Create NETEM with distribution and loss flag
> ok 7 e01a - Create NETEM with distribution and loss state flag
> ok 8 ba29 - Create NETEM with loss gemodel flag
> ok 9 0492 - Create NETEM with reorder flag
> ok 10 7862 - Create NETEM with rate limit
> ok 11 7235 - Create NETEM with multiple slot rate
> ok 12 5439 - Create NETEM with multiple slot setting
> ok 13 5029 - Change NETEM with loss state
> ok 14 3785 - Replace NETEM with delay time
> ok 15 4502 - Delete NETEM with handle
> ok 16 0785 - Show NETEM class
>
> ./tdc.py -c qfq
> ok 1 0582 - Create QFQ with default setting
> ok 2 c9a3 - Create QFQ with class weight setting
> ok 3 8452 - Create QFQ with class maxpkt setting
> ok 4 d920 - Create QFQ with multiple class setting
> ok 5 0548 - Delete QFQ with handle
> ok 6 5901 - Show QFQ class
>
> ./tdc.py -e 0521
> ok 1 0521 - Show ingress class
>
> ./tdc.py -e 1023
> ok 1 1023 - Show mq class
>
> ./tdc.py -e 2410
> ok 1 2410 - Show prio class
>
> ./tdc.py -e 290a
> ok 1 290a - Show RED class
>
> Zhengchao Shao (18):
> net/sched: sch_api: add helper for tc qdisc walker stats dump
> net/sched: use tc_qdisc_stats_dump() in qdisc
> selftests/tc-testings: add selftests for cake qdisc
> selftests/tc-testings: add selftests for cbq qdisc
> selftests/tc-testings: add selftests for cbs qdisc
> selftests/tc-testings: add selftests for drr qdisc
> selftests/tc-testings: add selftests for dsmark qdisc
> selftests/tc-testings: add selftests for fq_codel qdisc
> selftests/tc-testings: add selftests for hfsc qdisc
> selftests/tc-testings: add selftests for htb qdisc
> selftests/tc-testings: add selftests for mqprio qdisc
> selftests/tc-testings: add selftests for multiq qdisc
> selftests/tc-testings: add selftests for netem qdisc
> selftests/tc-testings: add selftests for qfq qdisc
> selftests/tc-testings: add show class case for ingress qdisc
> selftests/tc-testings: add show class case for mq qdisc
> selftests/tc-testings: add show class case for prio qdisc
> selftests/tc-testings: add show class case for red qdisc
>
> include/net/pkt_sched.h | 13 +
> net/sched/sch_atm.c | 6 +-
> net/sched/sch_cake.c | 9 +-
> net/sched/sch_cbq.c | 9 +-
> net/sched/sch_cbs.c | 8 +-
> net/sched/sch_drr.c | 9 +-
> net/sched/sch_dsmark.c | 14 +-
> net/sched/sch_ets.c | 9 +-
> net/sched/sch_fq_codel.c | 8 +-
> net/sched/sch_hfsc.c | 9 +-
> net/sched/sch_htb.c | 9 +-
> net/sched/sch_mq.c | 5 +-
> net/sched/sch_mqprio.c | 5 +-
> net/sched/sch_multiq.c | 9 +-
> net/sched/sch_netem.c | 8 +-
> net/sched/sch_prio.c | 9 +-
> net/sched/sch_qfq.c | 9 +-
> net/sched/sch_red.c | 7 +-
> net/sched/sch_sfb.c | 7 +-
> net/sched/sch_sfq.c | 8 +-
> net/sched/sch_skbprio.c | 9 +-
> net/sched/sch_taprio.c | 5 +-
> net/sched/sch_tbf.c | 7 +-
> .../tc-testing/tc-tests/qdiscs/cake.json | 487 ++++++++++++++++++
> .../tc-testing/tc-tests/qdiscs/cbq.json | 184 +++++++
> .../tc-testing/tc-tests/qdiscs/cbs.json | 234 +++++++++
> .../tc-testing/tc-tests/qdiscs/drr.json | 71 +++
> .../tc-testing/tc-tests/qdiscs/dsmark.json | 140 +++++
> .../tc-testing/tc-tests/qdiscs/fq_codel.json | 326 ++++++++++++
> .../tc-testing/tc-tests/qdiscs/hfsc.json | 167 ++++++
> .../tc-testing/tc-tests/qdiscs/htb.json | 285 ++++++++++
> .../tc-testing/tc-tests/qdiscs/ingress.json | 20 +
> .../tc-testing/tc-tests/qdiscs/mq.json | 24 +-
> .../tc-testing/tc-tests/qdiscs/mqprio.json | 114 ++++
> .../tc-testing/tc-tests/qdiscs/multiq.json | 114 ++++
> .../tc-testing/tc-tests/qdiscs/netem.json | 372 +++++++++++++
> .../tc-testing/tc-tests/qdiscs/prio.json | 20 +
> .../tc-testing/tc-tests/qdiscs/qfq.json | 145 ++++++
> .../tc-testing/tc-tests/qdiscs/red.json | 23 +
> 39 files changed, 2769 insertions(+), 148 deletions(-)
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cake.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbq.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbs.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/drr.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dsmark.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_codel.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hfsc.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/htb.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/mqprio.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/multiq.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/netem.json
> create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/qfq.json
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-09-19 18:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-17 5:02 [PATCH net-next,v2 00/18] refactor duplicate codes in the qdisc class walk function Zhengchao Shao
2022-09-19 18:31 ` Victor Nogueira
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.