All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Vedran Miletić" <rivanvx@gmail.com>
To: "Bartłomiej Holdenmayer" <bh@habah.com>
Cc: Takashi Iwai <tiwai@suse.de>, alsa-devel@alsa-project.org
Subject: Re: HP pavilion dv5 1110ew - no hdmi sound
Date: Tue, 17 Feb 2009 23:19:49 +0100	[thread overview]
Message-ID: <fd3eb9bf0902171419m53241d47pe17c5b2694d2aba8@mail.gmail.com> (raw)
In-Reply-To: <1234903396.6737.14.camel@hplaptop>

On Tue, Feb 17, 2009 at 9:43 PM, Bartłomiej Holdenmayer <bh@habah.com> wrote:
> Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:
>>
>> Well, just like what I wrote in the above: grab the latest alsa-driver
>> snapshot tarball, build it, install it, and add probe_mask=0x1ff
>> module option to snd-hda-intel, then load it.  If you've done it
>> properly, you see the message like above.  And let's see whether the
>> driver can detect more codecs.
>>
>>
>> Takashi
>> _______________________________________________
>> Alsa-devel mailing list
>> Alsa-devel@alsa-project.org
>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
> I did ehat You wrote. Here is my dmesg:
> [   14.729023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
> -> IRQ 2
> 2
> [   14.729028] hda_intel: codec_mask forced to 0xff
> [   14.729054] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [   15.776021]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:634: hda_intel: azx_get_response timeout,
> switching to
>  polling mode: last cmd=0x100f0000
> [   16.780019]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #1 probe error;
> disabling it...
> [   17.816508]
> ALSA /usr/src/Alsa-1.0.19/alsa-driver-1.0.19/pci/hda/../../alsa-k
> ernel/pci/hda/hda_intel.c:1271: hda_intel: Codec #3 probe error;
> disabling it...
> [   17.921600] input: HDA Digital PCBeep
> as /devices/pci0000:00/0000:00:1b.0/inp
> ut/input11
> [   18.052194] input: HDA Intel at 0x9f300000 irq 22 Mic at Ext Front
> Jack as /d
> evices/pci0000:00/0000:00:1b.0/input/input12
> [   18.052587] input: HDA Intel at 0x9f300000 irq 22 Mic at Sep UNKNOWN
> Jack as
> /devices/pci0000:00/0000:00:1b.0/input/input13
> [   18.052894] input: HDA Intel at 0x9f300000 irq 22 HP Out at Ext Front
> Jack as
>  /devices/pci0000:00/0000:00:1b.0/input/input14
>
> What next should I do?
>
> I have basic questions:
> Alsa to work good with my HDMI sound have to know what hardware is
> onboard and what it can do- features (f.ex.HDMI). What is responsible
> for recognition of hardware? Is that alsa-driver package? How can I
> force good recognition?
>
> aplay -l list devices it can use. Now for me it is:
> artek@hplaptop:~$ aplay -l
> **** Lista PLAYBACK urządzeń ****
> karta 0: Intel [HDA Intel], urządzenie 0: STAC92xx Analog [STAC92xx
> Analog]
>  Urządzenia podrzędne: 1/1
>  Urządzenie podrzędne #0: subdevice #0
> karta 0: Intel [HDA Intel], urządzenie 1: STAC92xx Digital [STAC92xx
> Digital]
>  Urządzenia podrzędne: 1/1
>  Urządzenie podrzędne #0: subdevice #0
>
> Up to my knowledge, as soon as Alsa knows about HDMI feature, i will get
> 3rd device with aplay -l. Am I right about it?
>
> What is that device: STAC92xx Digital?
> --
> Pozdrawiam / Regards
> Bartłomiej Holdenmayer
>
> GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>

This *could* be HDMI device, IF it is internally routed that way. Not
sure. Can you give it a shot?

Vedran Miletić
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2009-02-17 22:19 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-11  2:20 HP pavilion dv5 1110ew - no hdmi sound Bartłomiej Holdenmayer
2009-02-11  7:48 ` Takashi Iwai
2009-02-11  8:56   ` Vedran Miletić
2009-02-11  9:11     ` Takashi Iwai
2009-02-11 11:20       ` Vedran Miletić
2009-02-11 11:26         ` Takashi Iwai
2009-02-11 19:23   ` Bartłomiej Holdenmayer
2009-02-11 19:35     ` Vedran Miletić
2009-02-11 23:38       ` Bartłomiej Holdenmayer
2009-02-11 20:32     ` Takashi Iwai
2009-02-11 23:41       ` Bartłomiej Holdenmayer
2009-02-11 23:54         ` Takashi Iwai
2009-02-12 16:19           ` Vedran Miletić
2009-02-12 16:23             ` Takashi Iwai
2009-02-12 19:08             ` Bartłomiej Holdenmayer
2009-02-12  0:42   ` Bartłomiej Holdenmayer
2009-02-13  3:37   ` Bartłomiej Holdenmayer
2009-02-13  6:58     ` Takashi Iwai
2009-02-13  8:03       ` Takashi Iwai
2009-02-13 21:48         ` Bartłomiej Holdenmayer
2009-02-14 10:30           ` Takashi Iwai
2009-02-14 14:22             ` Bartłomiej Holdenmayer
2009-02-14 14:28               ` Vedran Miletić
2009-02-14 14:53                 ` Bartłomiej Holdenmayer
2009-02-14 15:15                   ` Vedran Miletić
2009-02-14 15:54                     ` Bartłomiej Holdenmayer
2009-02-14 17:02                     ` Takashi Iwai
2009-02-14 17:03                   ` Takashi Iwai
2009-02-14 20:19                     ` Bartłomiej Holdenmayer
2009-02-15 20:11                     ` Bartłomiej Holdenmayer
2009-02-17 20:43             ` Bartłomiej Holdenmayer
2009-02-17 22:19               ` Vedran Miletić [this message]
2009-02-18  6:33               ` Takashi Iwai
2009-02-18  6:59                 ` Takashi Iwai
2009-02-18 10:53                   ` bh
2009-02-19 22:41                   ` Bartłomiej Holdenmayer
     [not found] <499BBEC0.4040005@wanadoo.fr>
2009-02-18  8:26 ` Jean-Pierre André

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fd3eb9bf0902171419m53241d47pe17c5b2694d2aba8@mail.gmail.com \
    --to=rivanvx@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bh@habah.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.