* [PATCH v22 0/4] implement zstd cluster compression method
@ 2020-04-28 20:00 Denis Plotnikov
2020-04-28 20:00 ` [PATCH v22 1/4] qcow2: introduce compression type feature Denis Plotnikov
` (3 more replies)
0 siblings, 4 replies; 21+ messages in thread
From: Denis Plotnikov @ 2020-04-28 20:00 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den
v22:
03: remove assignemnt in if condition
v21:
03:
* remove the loop on compression [Max]
* use designated initializers [Max]
04:
* don't erase user's options [Max]
* use _rm_test_img [Max]
* add unsupported qcow2 options [Max]
v20:
04: fix a number of flaws [Vladimir]
* don't use $RAND_FILE passing to qemu-io,
so check $TEST_DIR is redundant
* re-arrage $RAND_FILE writing
* fix a typo
v19:
04: fix a number of flaws [Eric]
* remove rudundant test case descriptions
* fix stdout redirect
* don't use (())
* use peek_file_be instead of od
* check $TEST_DIR for spaces and other before using
* use $RAND_FILE safer
v18:
* 04: add quotes to all file name variables [Vladimir]
* 04: add Vladimir's comment according to "qemu-io write -s"
option issue.
v17:
* 03: remove incorrect comment in zstd decompress [Vladimir]
* 03: remove "paraniod" and rewrite the comment on decompress [Vladimir]
* 03: fix dead assignment [Vladimir]
* 04: add and remove quotes [Vladimir]
* 04: replace long offset form with the short one [Vladimir]
v16:
* 03: ssize_t for ret, size_t for zstd_ret [Vladimir]
* 04: small fixes according to the comments [Vladimir]
v15:
* 01: aiming qemu 5.1 [Eric]
* 03: change zstd_res definition place [Vladimir]
* 04: add two new test cases [Eric]
1. test adjacent cluster compression with zstd
2. test incompressible cluster processing
* 03, 04: many rewording and gramma fixing [Eric]
v14:
* fix bug on compression - looping until compress == 0 [Me]
* apply reworked Vladimir's suggestions:
1. not mixing ssize_t with size_t
2. safe check for ENOMEM in compression part - avoid overflow
3. tolerate sanity check allow zstd to make progress only
on one of the buffers
v13:
* 03: add progress sanity check to decompression loop [Vladimir]
03: add successful decompression check [Me]
v12:
* 03: again, rework compression and decompression loops
to make them more correct [Vladimir]
03: move assert in compression to more appropriate place
[Vladimir]
v11:
* 03: the loops don't need "do{}while" form anymore and
the they were buggy (missed "do" in the beginning)
replace them with usual "while(){}" loops [Vladimir]
v10:
* 03: fix zstd (de)compressed loops for multi-frame
cases [Vladimir]
v9:
* 01: fix error checking and reporting in qcow2_amend compression type part [Vladimir]
* 03: replace asserts with -EIO in qcow2_zstd_decompression [Vladimir, Alberto]
* 03: reword/amend/add comments, fix typos [Vladimir]
v8:
* 03: switch zstd API from simple to stream [Eric]
No need to state a special cluster layout for zstd
compressed clusters.
v7:
* use qapi_enum_parse instead of the open-coding [Eric]
* fix wording, typos and spelling [Eric]
v6:
* "block/qcow2-threads: fix qcow2_decompress" is removed from the series
since it has been accepted by Max already
* add compile time checking for Qcow2Header to be a multiple of 8 [Max, Alberto]
* report error on qcow2 amending when the compression type is actually chnged [Max]
* remove the extra space and the extra new line [Max]
* re-arrange acks and signed-off-s [Vladimir]
v5:
* replace -ENOTSUP with abort in qcow2_co_decompress [Vladimir]
* set cluster size for all test cases in the beginning of the 287 test
v4:
* the series is rebased on top of 01 "block/qcow2-threads: fix qcow2_decompress"
* 01 is just a no-change resend to avoid extra dependencies. Still, it may be merged in separate
v3:
* remove redundant max compression type value check [Vladimir, Eric]
(the switch below checks everything)
* prevent compression type changing on "qemu-img amend" [Vladimir]
* remove zstd config setting, since it has been added already by
"migration" patches [Vladimir]
* change the compression type error message [Vladimir]
* fix alignment and 80-chars exceeding [Vladimir]
v2:
* rework compression type setting [Vladimir]
* squash iotest changes to the compression type introduction patch [Vladimir, Eric]
* fix zstd availability checking in zstd iotest [Vladimir]
* remove unnecessry casting [Eric]
* remove rudundant checks [Eric]
* fix compressed cluster layout in qcow2 spec [Vladimir]
* fix wording [Eric, Vladimir]
* fix compression type filtering in iotests [Eric]
v1:
the initial series
Denis Plotnikov (4):
qcow2: introduce compression type feature
qcow2: rework the cluster compression routine
qcow2: add zstd cluster compression
iotests: 287: add qcow2 compression type test
docs/interop/qcow2.txt | 1 +
configure | 2 +-
qapi/block-core.json | 23 ++-
block/qcow2.h | 20 ++-
include/block/block_int.h | 1 +
block/qcow2-threads.c | 240 +++++++++++++++++++++++++++++--
block/qcow2.c | 120 ++++++++++++++++
slirp | 2 +-
tests/qemu-iotests/031.out | 14 +-
tests/qemu-iotests/036.out | 4 +-
tests/qemu-iotests/049.out | 102 ++++++-------
tests/qemu-iotests/060.out | 1 +
tests/qemu-iotests/061.out | 34 +++--
tests/qemu-iotests/065 | 28 ++--
tests/qemu-iotests/080 | 2 +-
tests/qemu-iotests/144.out | 4 +-
tests/qemu-iotests/182.out | 2 +-
tests/qemu-iotests/242.out | 5 +
tests/qemu-iotests/255.out | 8 +-
tests/qemu-iotests/287 | 152 ++++++++++++++++++++
tests/qemu-iotests/287.out | 67 +++++++++
tests/qemu-iotests/common.filter | 3 +-
tests/qemu-iotests/group | 1 +
23 files changed, 727 insertions(+), 109 deletions(-)
create mode 100755 tests/qemu-iotests/287
create mode 100644 tests/qemu-iotests/287.out
--
2.17.0
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v22 1/4] qcow2: introduce compression type feature 2020-04-28 20:00 [PATCH v22 0/4] implement zstd cluster compression method Denis Plotnikov @ 2020-04-28 20:00 ` Denis Plotnikov 2020-04-28 20:00 ` [PATCH v22 2/4] qcow2: rework the cluster compression routine Denis Plotnikov ` (2 subsequent siblings) 3 siblings, 0 replies; 21+ messages in thread From: Denis Plotnikov @ 2020-04-28 20:00 UTC (permalink / raw) To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den The patch adds some preparation parts for incompatible compression type feature to qcow2 allowing the use different compression methods for image clusters (de)compressing. It is implied that the compression type is set on the image creation and can be changed only later by image conversion, thus compression type defines the only compression algorithm used for the image, and thus, for all image clusters. The goal of the feature is to add support of other compression methods to qcow2. For example, ZSTD which is more effective on compression than ZLIB. The default compression is ZLIB. Images created with ZLIB compression type are backward compatible with older qemu versions. Adding of the compression type breaks a number of tests because now the compression type is reported on image creation and there are some changes in the qcow2 header in size and offsets. The tests are fixed in the following ways: * filter out compression_type for many tests * fix header size, feature table size and backing file offset affected tests: 031, 036, 061, 080 header_size +=8: 1 byte compression type 7 bytes padding feature_table += 48: incompatible feature compression type backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change) * add "compression type" for test output matching when it isn't filtered affected tests: 049, 060, 061, 065, 144, 182, 242, 255 Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> QAPI part: Acked-by: Markus Armbruster <armbru@redhat.com> --- qapi/block-core.json | 22 +++++- block/qcow2.h | 20 +++++- include/block/block_int.h | 1 + block/qcow2.c | 113 +++++++++++++++++++++++++++++++ tests/qemu-iotests/031.out | 14 ++-- tests/qemu-iotests/036.out | 4 +- tests/qemu-iotests/049.out | 102 ++++++++++++++-------------- tests/qemu-iotests/060.out | 1 + tests/qemu-iotests/061.out | 34 ++++++---- tests/qemu-iotests/065 | 28 +++++--- tests/qemu-iotests/080 | 2 +- tests/qemu-iotests/144.out | 4 +- tests/qemu-iotests/182.out | 2 +- tests/qemu-iotests/242.out | 5 ++ tests/qemu-iotests/255.out | 8 +-- tests/qemu-iotests/common.filter | 3 +- 16 files changed, 267 insertions(+), 96 deletions(-) diff --git a/qapi/block-core.json b/qapi/block-core.json index 943df1926a..1522e2983f 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -78,6 +78,8 @@ # # @bitmaps: A list of qcow2 bitmap details (since 4.0) # +# @compression-type: the image cluster compression method (since 5.1) +# # Since: 1.7 ## { 'struct': 'ImageInfoSpecificQCow2', @@ -89,7 +91,8 @@ '*corrupt': 'bool', 'refcount-bits': 'int', '*encrypt': 'ImageInfoSpecificQCow2Encryption', - '*bitmaps': ['Qcow2BitmapInfo'] + '*bitmaps': ['Qcow2BitmapInfo'], + 'compression-type': 'Qcow2CompressionType' } } ## @@ -4284,6 +4287,18 @@ 'data': [ 'v2', 'v3' ] } +## +# @Qcow2CompressionType: +# +# Compression type used in qcow2 image file +# +# @zlib: zlib compression, see <http://zlib.net/> +# +# Since: 5.1 +## +{ 'enum': 'Qcow2CompressionType', + 'data': [ 'zlib' ] } + ## # @BlockdevCreateOptionsQcow2: # @@ -4307,6 +4322,8 @@ # allowed values: off, falloc, full, metadata) # @lazy-refcounts: True if refcounts may be updated lazily (default: off) # @refcount-bits: Width of reference counts in bits (default: 16) +# @compression-type: The image cluster compression method +# (default: zlib, since 5.1) # # Since: 2.12 ## @@ -4322,7 +4339,8 @@ '*cluster-size': 'size', '*preallocation': 'PreallocMode', '*lazy-refcounts': 'bool', - '*refcount-bits': 'int' } } + '*refcount-bits': 'int', + '*compression-type':'Qcow2CompressionType' } } ## # @BlockdevCreateOptionsQed: diff --git a/block/qcow2.h b/block/qcow2.h index f4de0a27d5..6a8b82e6cc 100644 --- a/block/qcow2.h +++ b/block/qcow2.h @@ -146,8 +146,16 @@ typedef struct QCowHeader { uint32_t refcount_order; uint32_t header_length; + + /* Additional fields */ + uint8_t compression_type; + + /* header must be a multiple of 8 */ + uint8_t padding[7]; } QEMU_PACKED QCowHeader; +QEMU_BUILD_BUG_ON(!QEMU_IS_ALIGNED(sizeof(QCowHeader), 8)); + typedef struct QEMU_PACKED QCowSnapshotHeader { /* header is 8 byte aligned */ uint64_t l1_table_offset; @@ -216,13 +224,16 @@ enum { QCOW2_INCOMPAT_DIRTY_BITNR = 0, QCOW2_INCOMPAT_CORRUPT_BITNR = 1, QCOW2_INCOMPAT_DATA_FILE_BITNR = 2, + QCOW2_INCOMPAT_COMPRESSION_BITNR = 3, QCOW2_INCOMPAT_DIRTY = 1 << QCOW2_INCOMPAT_DIRTY_BITNR, QCOW2_INCOMPAT_CORRUPT = 1 << QCOW2_INCOMPAT_CORRUPT_BITNR, QCOW2_INCOMPAT_DATA_FILE = 1 << QCOW2_INCOMPAT_DATA_FILE_BITNR, + QCOW2_INCOMPAT_COMPRESSION = 1 << QCOW2_INCOMPAT_COMPRESSION_BITNR, QCOW2_INCOMPAT_MASK = QCOW2_INCOMPAT_DIRTY | QCOW2_INCOMPAT_CORRUPT - | QCOW2_INCOMPAT_DATA_FILE, + | QCOW2_INCOMPAT_DATA_FILE + | QCOW2_INCOMPAT_COMPRESSION, }; /* Compatible feature bits */ @@ -366,6 +377,13 @@ typedef struct BDRVQcow2State { bool metadata_preallocation_checked; bool metadata_preallocation; + /* + * Compression type used for the image. Default: 0 - ZLIB + * The image compression type is set on image creation. + * For now, the only way to change the compression type + * is to convert the image with the desired compression type set. + */ + Qcow2CompressionType compression_type; } BDRVQcow2State; typedef struct Qcow2COWRegion { diff --git a/include/block/block_int.h b/include/block/block_int.h index 4c3587ea19..bc91b69f46 100644 --- a/include/block/block_int.h +++ b/include/block/block_int.h @@ -57,6 +57,7 @@ #define BLOCK_OPT_REFCOUNT_BITS "refcount_bits" #define BLOCK_OPT_DATA_FILE "data_file" #define BLOCK_OPT_DATA_FILE_RAW "data_file_raw" +#define BLOCK_OPT_COMPRESSION_TYPE "compression_type" #define BLOCK_PROBE_BUF_SIZE 512 diff --git a/block/qcow2.c b/block/qcow2.c index b524b0c53f..9c0b20c912 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -1242,6 +1242,39 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options, return ret; } +static int validate_compression_type(BDRVQcow2State *s, Error **errp) +{ + switch (s->compression_type) { + case QCOW2_COMPRESSION_TYPE_ZLIB: + break; + + default: + error_setg(errp, "qcow2: unknown compression type: %u", + s->compression_type); + return -ENOTSUP; + } + + /* + * if the compression type differs from QCOW2_COMPRESSION_TYPE_ZLIB + * the incompatible feature flag must be set + */ + if (s->compression_type == QCOW2_COMPRESSION_TYPE_ZLIB) { + if (s->incompatible_features & QCOW2_INCOMPAT_COMPRESSION) { + error_setg(errp, "qcow2: Compression type incompatible feature " + "bit must not be set"); + return -EINVAL; + } + } else { + if (!(s->incompatible_features & QCOW2_INCOMPAT_COMPRESSION)) { + error_setg(errp, "qcow2: Compression type incompatible feature " + "bit must be set"); + return -EINVAL; + } + } + + return 0; +} + /* Called with s->lock held. */ static int coroutine_fn qcow2_do_open(BlockDriverState *bs, QDict *options, int flags, Error **errp) @@ -1357,6 +1390,23 @@ static int coroutine_fn qcow2_do_open(BlockDriverState *bs, QDict *options, s->compatible_features = header.compatible_features; s->autoclear_features = header.autoclear_features; + /* + * Handle compression type + * Older qcow2 images don't contain the compression type header. + * Distinguish them by the header length and use + * the only valid (default) compression type in that case + */ + if (header.header_length > offsetof(QCowHeader, compression_type)) { + s->compression_type = header.compression_type; + } else { + s->compression_type = QCOW2_COMPRESSION_TYPE_ZLIB; + } + + ret = validate_compression_type(s, errp); + if (ret) { + goto fail; + } + if (s->incompatible_features & ~QCOW2_INCOMPAT_MASK) { void *feature_table = NULL; qcow2_read_extensions(bs, header.header_length, ext_end, @@ -2727,6 +2777,11 @@ int qcow2_update_header(BlockDriverState *bs) total_size = bs->total_sectors * BDRV_SECTOR_SIZE; refcount_table_clusters = s->refcount_table_size >> (s->cluster_bits - 3); + ret = validate_compression_type(s, NULL); + if (ret) { + goto fail; + } + *header = (QCowHeader) { /* Version 2 fields */ .magic = cpu_to_be32(QCOW_MAGIC), @@ -2749,6 +2804,7 @@ int qcow2_update_header(BlockDriverState *bs) .autoclear_features = cpu_to_be64(s->autoclear_features), .refcount_order = cpu_to_be32(s->refcount_order), .header_length = cpu_to_be32(header_length), + .compression_type = s->compression_type, }; /* For older versions, write a shorter header */ @@ -2848,6 +2904,11 @@ int qcow2_update_header(BlockDriverState *bs) .bit = QCOW2_INCOMPAT_DATA_FILE_BITNR, .name = "external data file", }, + { + .type = QCOW2_FEAT_TYPE_INCOMPATIBLE, + .bit = QCOW2_INCOMPAT_COMPRESSION_BITNR, + .name = "compression type", + }, { .type = QCOW2_FEAT_TYPE_COMPATIBLE, .bit = QCOW2_COMPAT_LAZY_REFCOUNTS_BITNR, @@ -3286,6 +3347,7 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) uint64_t* refcount_table; Error *local_err = NULL; int ret; + uint8_t compression_type = QCOW2_COMPRESSION_TYPE_ZLIB; assert(create_options->driver == BLOCKDEV_DRIVER_QCOW2); qcow2_opts = &create_options->u.qcow2; @@ -3403,6 +3465,27 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) } } + if (qcow2_opts->has_compression_type && + qcow2_opts->compression_type != QCOW2_COMPRESSION_TYPE_ZLIB) { + + ret = -EINVAL; + + if (version < 3) { + error_setg(errp, "Non-zlib compression type is only supported with " + "compatibility level 1.1 and above (use version=v3 or " + "greater)"); + goto out; + } + + switch (qcow2_opts->compression_type) { + default: + error_setg(errp, "Unknown compression type"); + goto out; + } + + compression_type = qcow2_opts->compression_type; + } + /* Create BlockBackend to write to the image */ blk = blk_new(bdrv_get_aio_context(bs), BLK_PERM_WRITE | BLK_PERM_RESIZE, BLK_PERM_ALL); @@ -3425,6 +3508,8 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) .refcount_table_offset = cpu_to_be64(cluster_size), .refcount_table_clusters = cpu_to_be32(1), .refcount_order = cpu_to_be32(refcount_order), + /* don't deal with endianness since compression_type is 1 byte long */ + .compression_type = compression_type, .header_length = cpu_to_be32(sizeof(*header)), }; @@ -3443,6 +3528,10 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) header->autoclear_features |= cpu_to_be64(QCOW2_AUTOCLEAR_DATA_FILE_RAW); } + if (compression_type != QCOW2_COMPRESSION_TYPE_ZLIB) { + header->incompatible_features |= + cpu_to_be64(QCOW2_INCOMPAT_COMPRESSION); + } ret = blk_pwrite(blk, 0, header, cluster_size, 0); g_free(header); @@ -3628,6 +3717,7 @@ static int coroutine_fn qcow2_co_create_opts(BlockDriver *drv, { BLOCK_OPT_ENCRYPT, BLOCK_OPT_ENCRYPT_FORMAT }, { BLOCK_OPT_COMPAT_LEVEL, "version" }, { BLOCK_OPT_DATA_FILE_RAW, "data-file-raw" }, + { BLOCK_OPT_COMPRESSION_TYPE, "compression-type" }, { NULL, NULL }, }; @@ -4861,6 +4951,7 @@ static ImageInfoSpecific *qcow2_get_specific_info(BlockDriverState *bs, .data_file = g_strdup(s->image_data_file), .has_data_file_raw = has_data_file(bs), .data_file_raw = data_file_is_raw(bs), + .compression_type = s->compression_type, }; } else { /* if this assertion fails, this probably means a new version was @@ -5250,6 +5341,22 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts, "images"); return -EINVAL; } + } else if (!strcmp(desc->name, BLOCK_OPT_COMPRESSION_TYPE)) { + const char *ct_name = + qemu_opt_get(opts, BLOCK_OPT_COMPRESSION_TYPE); + int compression_type = + qapi_enum_parse(&Qcow2CompressionType_lookup, ct_name, -1, + NULL); + if (compression_type == -1) { + error_setg(errp, "Unknown compression type: %s", ct_name); + return -ENOTSUP; + } + + if (compression_type != s->compression_type) { + error_setg(errp, "Changing the compression type " + "is not supported"); + return -ENOTSUP; + } } else { /* if this point is reached, this probably means a new option was * added without having it covered here */ @@ -5518,6 +5625,12 @@ static QemuOptsList qcow2_create_opts = { .help = "Width of a reference count entry in bits", .def_value_str = "16" }, + { + .name = BLOCK_OPT_COMPRESSION_TYPE, + .type = QEMU_OPT_STRING, + .help = "Compression method used for image cluster compression", + .def_value_str = "zlib" + }, { /* end of list */ } } }; diff --git a/tests/qemu-iotests/031.out b/tests/qemu-iotests/031.out index 46f97c5a4e..5a4beda6a2 100644 --- a/tests/qemu-iotests/031.out +++ b/tests/qemu-iotests/031.out @@ -113,11 +113,11 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> Header extension: @@ -146,11 +146,11 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> Header extension: @@ -164,7 +164,7 @@ No errors were found on the image. magic 0x514649fb version 3 -backing_file_offset 0x1d8 +backing_file_offset 0x210 backing_file_size 0x17 cluster_bits 16 size 67108864 @@ -179,7 +179,7 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0xe2792aca @@ -188,7 +188,7 @@ data 'host_device' Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> Header extension: diff --git a/tests/qemu-iotests/036.out b/tests/qemu-iotests/036.out index 23b699ce06..e409acf60e 100644 --- a/tests/qemu-iotests/036.out +++ b/tests/qemu-iotests/036.out @@ -26,7 +26,7 @@ compatible_features [] autoclear_features [63] Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> @@ -38,7 +38,7 @@ compatible_features [] autoclear_features [] Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> *** done diff --git a/tests/qemu-iotests/049.out b/tests/qemu-iotests/049.out index affa55b341..a5cfba1756 100644 --- a/tests/qemu-iotests/049.out +++ b/tests/qemu-iotests/049.out @@ -4,90 +4,90 @@ QA output created by 049 == 1. Traditional size parameter == qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024b -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1k -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1K -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1G -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1T -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024.0 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024.0b -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5k -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5K -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5G -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5T -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib == 2. Specifying size via -o == qemu-img create -f qcow2 -o size=1024 TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1024b TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1k TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1K TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1M TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1G TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1T TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1024.0 TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1024.0b TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1.5k TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1.5K TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1.5M TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1.5G TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1.5T TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib == 3. Invalid sizes == @@ -129,84 +129,84 @@ qemu-img: TEST_DIR/t.qcow2: The image size must be specified only once == Check correct interpretation of suffixes for cluster size == qemu-img create -f qcow2 -o cluster_size=1024 TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1024b TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1k TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1K TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1M TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1048576 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1048576 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1024.0 TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1024.0b TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=0.5k TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=0.5K TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=0.5M TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=524288 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=524288 lazy_refcounts=off refcount_bits=16 compression_type=zlib == Check compat level option == qemu-img create -f qcow2 -o compat=0.10 TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=1.1 TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=0.42 TEST_DIR/t.qcow2 64M qemu-img: TEST_DIR/t.qcow2: Invalid parameter '0.42' -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.42 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.42 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=foobar TEST_DIR/t.qcow2 64M qemu-img: TEST_DIR/t.qcow2: Invalid parameter 'foobar' -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=foobar cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=foobar cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib == Check preallocation option == qemu-img create -f qcow2 -o preallocation=off TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=off lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=off lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o preallocation=metadata TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=metadata lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=metadata lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o preallocation=1234 TEST_DIR/t.qcow2 64M qemu-img: TEST_DIR/t.qcow2: Invalid parameter '1234' -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=1234 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=1234 lazy_refcounts=off refcount_bits=16 compression_type=zlib == Check encryption option == qemu-img create -f qcow2 -o encryption=off TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 --object secret,id=sec0,data=123456 -o encryption=on,encrypt.key-secret=sec0 TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=on encrypt.key-secret=sec0 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=on encrypt.key-secret=sec0 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib == Check lazy_refcounts option (only with v3) == qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=off TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=on refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=on refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=0.10,lazy_refcounts=off TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=0.10,lazy_refcounts=on TEST_DIR/t.qcow2 64M qemu-img: TEST_DIR/t.qcow2: Lazy refcounts only supported with compatibility level 1.1 and above (use version=v3 or greater) -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=on refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=on refcount_bits=16 compression_type=zlib *** done diff --git a/tests/qemu-iotests/060.out b/tests/qemu-iotests/060.out index 09caaea865..be5f8707a3 100644 --- a/tests/qemu-iotests/060.out +++ b/tests/qemu-iotests/060.out @@ -17,6 +17,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 corrupt: true diff --git a/tests/qemu-iotests/061.out b/tests/qemu-iotests/061.out index 413cc4e0f4..45c029228c 100644 --- a/tests/qemu-iotests/061.out +++ b/tests/qemu-iotests/061.out @@ -22,11 +22,11 @@ incompatible_features [] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> magic 0x514649fb @@ -80,11 +80,11 @@ incompatible_features [] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> magic 0x514649fb @@ -136,11 +136,11 @@ incompatible_features [0] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> ERROR cluster 5 refcount=0 reference=1 @@ -191,11 +191,11 @@ incompatible_features [] compatible_features [42] autoclear_features [42] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> magic 0x514649fb @@ -260,11 +260,11 @@ incompatible_features [] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> read 65536/65536 bytes at offset 44040192 @@ -294,11 +294,11 @@ incompatible_features [0] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> ERROR cluster 5 refcount=0 reference=1 @@ -323,11 +323,11 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 288 +length 336 data <binary> read 131072/131072 bytes at offset 0 @@ -491,6 +491,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data @@ -511,6 +512,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: foo @@ -524,6 +526,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file raw: false @@ -538,6 +541,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data @@ -550,6 +554,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data @@ -563,6 +568,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data diff --git a/tests/qemu-iotests/065 b/tests/qemu-iotests/065 index 6426474271..18dc488c7a 100755 --- a/tests/qemu-iotests/065 +++ b/tests/qemu-iotests/065 @@ -88,24 +88,30 @@ class TestQMP(TestImageInfoSpecific): class TestQCow2(TestQemuImgInfo): '''Testing a qcow2 version 2 image''' img_options = 'compat=0.10' - json_compare = { 'compat': '0.10', 'refcount-bits': 16 } - human_compare = [ 'compat: 0.10', 'refcount bits: 16' ] + json_compare = { 'compat': '0.10', 'refcount-bits': 16, + 'compression-type': 'zlib' } + human_compare = [ 'compat: 0.10', 'compression type: zlib', + 'refcount bits: 16' ] class TestQCow3NotLazy(TestQemuImgInfo): '''Testing a qcow2 version 3 image with lazy refcounts disabled''' img_options = 'compat=1.1,lazy_refcounts=off' json_compare = { 'compat': '1.1', 'lazy-refcounts': False, - 'refcount-bits': 16, 'corrupt': False } - human_compare = [ 'compat: 1.1', 'lazy refcounts: false', - 'refcount bits: 16', 'corrupt: false' ] + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } + human_compare = [ 'compat: 1.1', 'compression type: zlib', + 'lazy refcounts: false', 'refcount bits: 16', + 'corrupt: false' ] class TestQCow3Lazy(TestQemuImgInfo): '''Testing a qcow2 version 3 image with lazy refcounts enabled''' img_options = 'compat=1.1,lazy_refcounts=on' json_compare = { 'compat': '1.1', 'lazy-refcounts': True, - 'refcount-bits': 16, 'corrupt': False } - human_compare = [ 'compat: 1.1', 'lazy refcounts: true', - 'refcount bits: 16', 'corrupt: false' ] + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } + human_compare = [ 'compat: 1.1', 'compression type: zlib', + 'lazy refcounts: true', 'refcount bits: 16', + 'corrupt: false' ] class TestQCow3NotLazyQMP(TestQMP): '''Testing a qcow2 version 3 image with lazy refcounts disabled, opening @@ -113,7 +119,8 @@ class TestQCow3NotLazyQMP(TestQMP): img_options = 'compat=1.1,lazy_refcounts=off' qemu_options = 'lazy-refcounts=on' compare = { 'compat': '1.1', 'lazy-refcounts': False, - 'refcount-bits': 16, 'corrupt': False } + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } class TestQCow3LazyQMP(TestQMP): @@ -122,7 +129,8 @@ class TestQCow3LazyQMP(TestQMP): img_options = 'compat=1.1,lazy_refcounts=on' qemu_options = 'lazy-refcounts=off' compare = { 'compat': '1.1', 'lazy-refcounts': True, - 'refcount-bits': 16, 'corrupt': False } + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } TestImageInfoSpecific = None TestQemuImgInfo = None diff --git a/tests/qemu-iotests/080 b/tests/qemu-iotests/080 index a3d13c414e..7588c63b6c 100755 --- a/tests/qemu-iotests/080 +++ b/tests/qemu-iotests/080 @@ -45,7 +45,7 @@ _supported_os Linux # - This is generally a test for compat=1.1 images _unsupported_imgopts 'refcount_bits=1[^0-9]' data_file 'compat=0.10' -header_size=104 +header_size=112 offset_backing_file_offset=8 offset_backing_file_size=16 diff --git a/tests/qemu-iotests/144.out b/tests/qemu-iotests/144.out index c7aa2e4820..885a8874a5 100644 --- a/tests/qemu-iotests/144.out +++ b/tests/qemu-iotests/144.out @@ -9,7 +9,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=536870912 { 'execute': 'qmp_capabilities' } {"return": {}} { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/tmp.IMGFMT', 'format': 'IMGFMT' } } -Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib {"return": {}} === Performing block-commit on active layer === @@ -31,6 +31,6 @@ Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/ === Performing Live Snapshot 2 === { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/tmp2.IMGFMT', 'format': 'IMGFMT' } } -Formatting 'TEST_DIR/tmp2.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/tmp2.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib {"return": {}} *** done diff --git a/tests/qemu-iotests/182.out b/tests/qemu-iotests/182.out index a8eea166c3..ae43654d32 100644 --- a/tests/qemu-iotests/182.out +++ b/tests/qemu-iotests/182.out @@ -13,7 +13,7 @@ Is another process using the image [TEST_DIR/t.qcow2]? {'execute': 'blockdev-add', 'arguments': { 'node-name': 'node0', 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'locking': 'on' } } {"return": {}} {'execute': 'blockdev-snapshot-sync', 'arguments': { 'node-name': 'node0', 'snapshot-file': 'TEST_DIR/t.IMGFMT.overlay', 'snapshot-node-name': 'node1' } } -Formatting 'TEST_DIR/t.qcow2.overlay', fmt=qcow2 size=197120 backing_file=TEST_DIR/t.qcow2 backing_fmt=file cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2.overlay', fmt=qcow2 size=197120 backing_file=TEST_DIR/t.qcow2 backing_fmt=file cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib {"return": {}} {'execute': 'blockdev-add', 'arguments': { 'node-name': 'node1', 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'locking': 'on' } } {"return": {}} diff --git a/tests/qemu-iotests/242.out b/tests/qemu-iotests/242.out index 7ac8404d11..091b9126ce 100644 --- a/tests/qemu-iotests/242.out +++ b/tests/qemu-iotests/242.out @@ -12,6 +12,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 corrupt: false @@ -32,6 +33,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]: @@ -64,6 +66,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]: @@ -104,6 +107,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]: @@ -153,6 +157,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]: diff --git a/tests/qemu-iotests/255.out b/tests/qemu-iotests/255.out index 348909fdef..a3c99fd62e 100644 --- a/tests/qemu-iotests/255.out +++ b/tests/qemu-iotests/255.out @@ -3,9 +3,9 @@ Finishing a commit job with background reads === Create backing chain and start VM === -Formatting 'TEST_DIR/PID-t.qcow2.mid', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-t.qcow2.mid', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib -Formatting 'TEST_DIR/PID-t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib === Start background read requests === @@ -23,9 +23,9 @@ Closing the VM while a job is being cancelled === Create images and start VM === -Formatting 'TEST_DIR/PID-src.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-src.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib -Formatting 'TEST_DIR/PID-dst.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-dst.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib wrote 1048576/1048576 bytes at offset 0 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter index 3f8ee3e5f7..279e0bbb0d 100644 --- a/tests/qemu-iotests/common.filter +++ b/tests/qemu-iotests/common.filter @@ -152,7 +152,8 @@ _filter_img_create() -e "s# refcount_bits=[0-9]\\+##g" \ -e "s# key-secret=[a-zA-Z0-9]\\+##g" \ -e "s# iter-time=[0-9]\\+##g" \ - -e "s# force_size=\\(on\\|off\\)##g" + -e "s# force_size=\\(on\\|off\\)##g" \ + -e "s# compression_type=[a-zA-Z0-9]\\+##g" } _filter_img_info() -- 2.17.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v22 2/4] qcow2: rework the cluster compression routine 2020-04-28 20:00 [PATCH v22 0/4] implement zstd cluster compression method Denis Plotnikov 2020-04-28 20:00 ` [PATCH v22 1/4] qcow2: introduce compression type feature Denis Plotnikov @ 2020-04-28 20:00 ` Denis Plotnikov 2020-04-28 20:00 ` [PATCH v22 3/4] qcow2: add zstd cluster compression Denis Plotnikov 2020-04-28 20:00 ` [PATCH v22 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov 3 siblings, 0 replies; 21+ messages in thread From: Denis Plotnikov @ 2020-04-28 20:00 UTC (permalink / raw) To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den The patch enables processing the image compression type defined for the image and chooses an appropriate method for image clusters (de)compression. Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> --- block/qcow2-threads.c | 71 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 60 insertions(+), 11 deletions(-) diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c index a68126f291..7dbaf53489 100644 --- a/block/qcow2-threads.c +++ b/block/qcow2-threads.c @@ -74,7 +74,9 @@ typedef struct Qcow2CompressData { } Qcow2CompressData; /* - * qcow2_compress() + * qcow2_zlib_compress() + * + * Compress @src_size bytes of data using zlib compression method * * @dest - destination buffer, @dest_size bytes * @src - source buffer, @src_size bytes @@ -83,8 +85,8 @@ typedef struct Qcow2CompressData { * -ENOMEM destination buffer is not enough to store compressed data * -EIO on any other error */ -static ssize_t qcow2_compress(void *dest, size_t dest_size, - const void *src, size_t src_size) +static ssize_t qcow2_zlib_compress(void *dest, size_t dest_size, + const void *src, size_t src_size) { ssize_t ret; z_stream strm; @@ -119,10 +121,10 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size, } /* - * qcow2_decompress() + * qcow2_zlib_decompress() * * Decompress some data (not more than @src_size bytes) to produce exactly - * @dest_size bytes. + * @dest_size bytes using zlib compression method * * @dest - destination buffer, @dest_size bytes * @src - source buffer, @src_size bytes @@ -130,8 +132,8 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size, * Returns: 0 on success * -EIO on fail */ -static ssize_t qcow2_decompress(void *dest, size_t dest_size, - const void *src, size_t src_size) +static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size, + const void *src, size_t src_size) { int ret; z_stream strm; @@ -191,20 +193,67 @@ qcow2_co_do_compress(BlockDriverState *bs, void *dest, size_t dest_size, return arg.ret; } +/* + * qcow2_co_compress() + * + * Compress @src_size bytes of data using the compression + * method defined by the image compression type + * + * @dest - destination buffer, @dest_size bytes + * @src - source buffer, @src_size bytes + * + * Returns: compressed size on success + * a negative error code on failure + */ ssize_t coroutine_fn qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size, const void *src, size_t src_size) { - return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, - qcow2_compress); + BDRVQcow2State *s = bs->opaque; + Qcow2CompressFunc fn; + + switch (s->compression_type) { + case QCOW2_COMPRESSION_TYPE_ZLIB: + fn = qcow2_zlib_compress; + break; + + default: + abort(); + } + + return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, fn); } +/* + * qcow2_co_decompress() + * + * Decompress some data (not more than @src_size bytes) to produce exactly + * @dest_size bytes using the compression method defined by the image + * compression type + * + * @dest - destination buffer, @dest_size bytes + * @src - source buffer, @src_size bytes + * + * Returns: 0 on success + * a negative error code on failure + */ ssize_t coroutine_fn qcow2_co_decompress(BlockDriverState *bs, void *dest, size_t dest_size, const void *src, size_t src_size) { - return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, - qcow2_decompress); + BDRVQcow2State *s = bs->opaque; + Qcow2CompressFunc fn; + + switch (s->compression_type) { + case QCOW2_COMPRESSION_TYPE_ZLIB: + fn = qcow2_zlib_decompress; + break; + + default: + abort(); + } + + return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, fn); } -- 2.17.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-28 20:00 [PATCH v22 0/4] implement zstd cluster compression method Denis Plotnikov 2020-04-28 20:00 ` [PATCH v22 1/4] qcow2: introduce compression type feature Denis Plotnikov 2020-04-28 20:00 ` [PATCH v22 2/4] qcow2: rework the cluster compression routine Denis Plotnikov @ 2020-04-28 20:00 ` Denis Plotnikov 2020-04-28 21:05 ` Eric Blake 2020-04-29 10:24 ` Max Reitz 2020-04-28 20:00 ` [PATCH v22 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov 3 siblings, 2 replies; 21+ messages in thread From: Denis Plotnikov @ 2020-04-28 20:00 UTC (permalink / raw) To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den zstd significantly reduces cluster compression time. It provides better compression performance maintaining the same level of the compression ratio in comparison with zlib, which, at the moment, is the only compression method available. The performance test results: Test compresses and decompresses qemu qcow2 image with just installed rhel-7.6 guest. Image cluster size: 64K. Image on disk size: 2.2G The test was conducted with brd disk to reduce the influence of disk subsystem to the test results. The results is given in seconds. compress cmd: time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] src.img [zlib|zstd]_compressed.img decompress cmd time ./qemu-img convert -O qcow2 [zlib|zstd]_compressed.img uncompressed.img compression decompression zlib zstd zlib zstd ------------------------------------------------------------ real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) user 65.0 15.8 5.3 2.5 sys 3.3 0.2 2.0 2.0 Both ZLIB and ZSTD gave the same compression ratio: 1.57 compressed image size in both cases: 1.4G Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> QAPI part: Acked-by: Markus Armbruster <armbru@redhat.com> --- docs/interop/qcow2.txt | 1 + configure | 2 +- qapi/block-core.json | 3 +- block/qcow2-threads.c | 169 +++++++++++++++++++++++++++++++++++++++++ block/qcow2.c | 7 ++ slirp | 2 +- 6 files changed, 181 insertions(+), 3 deletions(-) diff --git a/docs/interop/qcow2.txt b/docs/interop/qcow2.txt index 640e0eca40..18a77f737e 100644 --- a/docs/interop/qcow2.txt +++ b/docs/interop/qcow2.txt @@ -209,6 +209,7 @@ version 2. Available compression type values: 0: zlib <https://www.zlib.net/> + 1: zstd <http://github.com/facebook/zstd> === Header padding === diff --git a/configure b/configure index 23b5e93752..4e3a1690ea 100755 --- a/configure +++ b/configure @@ -1861,7 +1861,7 @@ disabled with --disable-FEATURE, default is enabled if available: lzfse support of lzfse compression library (for reading lzfse-compressed dmg images) zstd support for zstd compression library - (for migration compression) + (for migration compression and qcow2 cluster compression) seccomp seccomp support coroutine-pool coroutine freelist (better performance) glusterfs GlusterFS backend diff --git a/qapi/block-core.json b/qapi/block-core.json index 1522e2983f..6fbacddab2 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -4293,11 +4293,12 @@ # Compression type used in qcow2 image file # # @zlib: zlib compression, see <http://zlib.net/> +# @zstd: zstd compression, see <http://github.com/facebook/zstd> # # Since: 5.1 ## { 'enum': 'Qcow2CompressionType', - 'data': [ 'zlib' ] } + 'data': [ 'zlib', { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] } ## # @BlockdevCreateOptionsQcow2: diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c index 7dbaf53489..a0b12e1b15 100644 --- a/block/qcow2-threads.c +++ b/block/qcow2-threads.c @@ -28,6 +28,11 @@ #define ZLIB_CONST #include <zlib.h> +#ifdef CONFIG_ZSTD +#include <zstd.h> +#include <zstd_errors.h> +#endif + #include "qcow2.h" #include "block/thread-pool.h" #include "crypto.h" @@ -166,6 +171,160 @@ static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size, return ret; } +#ifdef CONFIG_ZSTD + +/* + * qcow2_zstd_compress() + * + * Compress @src_size bytes of data using zstd compression method + * + * @dest - destination buffer, @dest_size bytes + * @src - source buffer, @src_size bytes + * + * Returns: compressed size on success + * -ENOMEM destination buffer is not enough to store compressed data + * -EIO on any other error + */ +static ssize_t qcow2_zstd_compress(void *dest, size_t dest_size, + const void *src, size_t src_size) +{ + ssize_t ret; + size_t zstd_ret; + ZSTD_outBuffer output = { + .dst = dest, + .size = dest_size, + .pos = 0 + }; + ZSTD_inBuffer input = { + .src = src, + .size = src_size, + .pos = 0 + }; + ZSTD_CCtx *cctx = ZSTD_createCCtx(); + + if (!cctx) { + return -EIO; + } + /* + * Use the zstd streamed interface for symmetry with decompression, + * where streaming is essential since we don't record the exact + * compressed size. + * + * ZSTD_compressStream2() tries to compress everything it could + * with a single call. Although, ZSTD docs says that: + * "You must continue calling ZSTD_compressStream2() with ZSTD_e_end + * until it returns 0, at which point you are free to start a new frame", + * in out tests we saw the only case when it returned with >0 - + * when the output buffer was too small. In that case, + * ZSTD_compressStream2() expects a bigger buffer on the next call. + * We can't provide a bigger buffer because we are limited with dest_size + * which we pass to the ZSTD_compressStream2() at once. + * So, we don't need any loops and just abort the compression when we + * don't get 0 result on the first call. + */ + zstd_ret = ZSTD_compressStream2(cctx, &output, &input, ZSTD_e_end); + + if (zstd_ret) { + if (zstd_ret > output.size - output.pos) { + ret = -ENOMEM; + } else { + ret = -EIO; + } + goto out; + } + + /* make sure we can safely return compressed buffer size with ssize_t */ + assert(output.pos <= SSIZE_MAX); + ret = output.pos; +out: + ZSTD_freeCCtx(cctx); + return ret; +} + +/* + * qcow2_zstd_decompress() + * + * Decompress some data (not more than @src_size bytes) to produce exactly + * @dest_size bytes using zstd compression method + * + * @dest - destination buffer, @dest_size bytes + * @src - source buffer, @src_size bytes + * + * Returns: 0 on success + * -EIO on any error + */ +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, + const void *src, size_t src_size) +{ + size_t zstd_ret = 0; + ssize_t ret = 0; + ZSTD_outBuffer output = { + .dst = dest, + .size = dest_size, + .pos = 0 + }; + ZSTD_inBuffer input = { + .src = src, + .size = src_size, + .pos = 0 + }; + ZSTD_DCtx *dctx = ZSTD_createDCtx(); + + if (!dctx) { + return -EIO; + } + + /* + * The compressed stream from the input buffer may consist of more + * than one zstd frame. So we iterate until we get a fully + * uncompressed cluster. + * From zstd docs related to ZSTD_decompressStream: + * "return : 0 when a frame is completely decoded and fully flushed" + * We suppose that this means: each time ZSTD_decompressStream reads + * only ONE full frame and returns 0 if and only if that frame + * is completely decoded and flushed. Only after returning 0, + * ZSTD_decompressStream reads another ONE full frame. + */ + while (output.pos < output.size) { + size_t last_in_pos = input.pos; + size_t last_out_pos = output.pos; + zstd_ret = ZSTD_decompressStream(dctx, &output, &input); + + if (ZSTD_isError(zstd_ret)) { + ret = -EIO; + break; + } + + /* + * The ZSTD manual is vague about what to do if it reads + * the buffer partially, and we don't want to get stuck + * in an infinite loop where ZSTD_decompressStream + * returns > 0 waiting for another input chunk. So, we add + * a check which ensures that the loop makes some progress + * on each step. + */ + if (last_in_pos >= input.pos && + last_out_pos >= output.pos) { + ret = -EIO; + break; + } + } + /* + * Make sure that we have the frame fully flushed here + * if not, we somehow managed to get uncompressed cluster + * greater then the cluster size, possibly because of its + * damage. + */ + if (zstd_ret > 0) { + ret = -EIO; + } + + ZSTD_freeDCtx(dctx); + assert(ret == 0 || ret == -EIO); + return ret; +} +#endif + static int qcow2_compress_pool_func(void *opaque) { Qcow2CompressData *data = opaque; @@ -217,6 +376,11 @@ qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size, fn = qcow2_zlib_compress; break; +#ifdef CONFIG_ZSTD + case QCOW2_COMPRESSION_TYPE_ZSTD: + fn = qcow2_zstd_compress; + break; +#endif default: abort(); } @@ -249,6 +413,11 @@ qcow2_co_decompress(BlockDriverState *bs, void *dest, size_t dest_size, fn = qcow2_zlib_decompress; break; +#ifdef CONFIG_ZSTD + case QCOW2_COMPRESSION_TYPE_ZSTD: + fn = qcow2_zstd_decompress; + break; +#endif default: abort(); } diff --git a/block/qcow2.c b/block/qcow2.c index 9c0b20c912..21f281b7f8 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -1246,6 +1246,9 @@ static int validate_compression_type(BDRVQcow2State *s, Error **errp) { switch (s->compression_type) { case QCOW2_COMPRESSION_TYPE_ZLIB: +#ifdef CONFIG_ZSTD + case QCOW2_COMPRESSION_TYPE_ZSTD: +#endif break; default: @@ -3478,6 +3481,10 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) } switch (qcow2_opts->compression_type) { +#ifdef CONFIG_ZSTD + case QCOW2_COMPRESSION_TYPE_ZSTD: + break; +#endif default: error_setg(errp, "Unknown compression type"); goto out; diff --git a/slirp b/slirp index 2faae0f778..55ab21c9a3 160000 --- a/slirp +++ b/slirp @@ -1 +1 @@ -Subproject commit 2faae0f778f818fadc873308f983289df697eb93 +Subproject commit 55ab21c9a36852915b81f1b41ebaf3b6509dd8ba -- 2.17.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-28 20:00 ` [PATCH v22 3/4] qcow2: add zstd cluster compression Denis Plotnikov @ 2020-04-28 21:05 ` Eric Blake 2020-04-29 10:24 ` Max Reitz 1 sibling, 0 replies; 21+ messages in thread From: Eric Blake @ 2020-04-28 21:05 UTC (permalink / raw) To: Denis Plotnikov, qemu-devel Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den On 4/28/20 3:00 PM, Denis Plotnikov wrote: > zstd significantly reduces cluster compression time. > It provides better compression performance maintaining > the same level of the compression ratio in comparison with > zlib, which, at the moment, is the only compression > method available. > > The performance test results: > Test compresses and decompresses qemu qcow2 image with just > installed rhel-7.6 guest. > Image cluster size: 64K. Image on disk size: 2.2G > > The test was conducted with brd disk to reduce the influence > of disk subsystem to the test results. > The results is given in seconds. > > compress cmd: > time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] > src.img [zlib|zstd]_compressed.img > decompress cmd > time ./qemu-img convert -O qcow2 > [zlib|zstd]_compressed.img uncompressed.img > > compression decompression > zlib zstd zlib zstd > ------------------------------------------------------------ > real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) > user 65.0 15.8 5.3 2.5 > sys 3.3 0.2 2.0 2.0 > > Both ZLIB and ZSTD gave the same compression ratio: 1.57 > compressed image size in both cases: 1.4G > > Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> > QAPI part: > Acked-by: Markus Armbruster <armbru@redhat.com> > --- > +static ssize_t qcow2_zstd_compress(void *dest, size_t dest_size, > + const void *src, size_t src_size) > +{ > + ssize_t ret; > + size_t zstd_ret; > + ZSTD_outBuffer output = { > + .dst = dest, > + .size = dest_size, > + .pos = 0 > + }; > + > + /* make sure we can safely return compressed buffer size with ssize_t */ > + assert(output.pos <= SSIZE_MAX); Seems rather vague, since we know that .pos won't exceed .size which was initialized by dest_size which is <= 2M. A tighter assertion: assert(output.pos <= dest_size) seems like it is more realistic to your real constraint (namely, that zstd did not overflow dest). > + ret = output.pos; > +out: > + ZSTD_freeCCtx(cctx); > + return ret; > +} > + > +++ b/slirp > @@ -1 +1 @@ > -Subproject commit 2faae0f778f818fadc873308f983289df697eb93 > +Subproject commit 55ab21c9a36852915b81f1b41ebaf3b6509dd8ba Umm, you definitely don't want that. A maintainer could touch up both of those, but I'm not sure which block maintainer will be accepting this series. Maybe wait for that question to be answered before trying to post a v23. -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-28 20:00 ` [PATCH v22 3/4] qcow2: add zstd cluster compression Denis Plotnikov 2020-04-28 21:05 ` Eric Blake @ 2020-04-29 10:24 ` Max Reitz 2020-04-29 10:37 ` Vladimir Sementsov-Ogievskiy 2020-04-29 10:38 ` Denis Plotnikov 1 sibling, 2 replies; 21+ messages in thread From: Max Reitz @ 2020-04-29 10:24 UTC (permalink / raw) To: Denis Plotnikov, qemu-devel Cc: kwolf, vsementsov, berto, qemu-block, armbru, den [-- Attachment #1.1: Type: text/plain, Size: 2289 bytes --] On 28.04.20 22:00, Denis Plotnikov wrote: > zstd significantly reduces cluster compression time. > It provides better compression performance maintaining > the same level of the compression ratio in comparison with > zlib, which, at the moment, is the only compression > method available. > > The performance test results: > Test compresses and decompresses qemu qcow2 image with just > installed rhel-7.6 guest. > Image cluster size: 64K. Image on disk size: 2.2G > > The test was conducted with brd disk to reduce the influence > of disk subsystem to the test results. > The results is given in seconds. > > compress cmd: > time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] > src.img [zlib|zstd]_compressed.img > decompress cmd > time ./qemu-img convert -O qcow2 > [zlib|zstd]_compressed.img uncompressed.img > > compression decompression > zlib zstd zlib zstd > ------------------------------------------------------------ > real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) > user 65.0 15.8 5.3 2.5 > sys 3.3 0.2 2.0 2.0 > > Both ZLIB and ZSTD gave the same compression ratio: 1.57 > compressed image size in both cases: 1.4G > > Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> > QAPI part: > Acked-by: Markus Armbruster <armbru@redhat.com> > --- > docs/interop/qcow2.txt | 1 + > configure | 2 +- > qapi/block-core.json | 3 +- > block/qcow2-threads.c | 169 +++++++++++++++++++++++++++++++++++++++++ > block/qcow2.c | 7 ++ > slirp | 2 +- > 6 files changed, 181 insertions(+), 3 deletions(-) [...] > diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c > index 7dbaf53489..a0b12e1b15 100644 > --- a/block/qcow2-threads.c > +++ b/block/qcow2-threads.c [...] > +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, > + const void *src, size_t src_size) > +{ [...] > + /* > + * The compressed stream from the input buffer may consist of more > + * than one zstd frame. Can it? Max [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-29 10:24 ` Max Reitz @ 2020-04-29 10:37 ` Vladimir Sementsov-Ogievskiy 2020-04-29 12:17 ` Max Reitz 2020-04-29 10:38 ` Denis Plotnikov 1 sibling, 1 reply; 21+ messages in thread From: Vladimir Sementsov-Ogievskiy @ 2020-04-29 10:37 UTC (permalink / raw) To: Max Reitz, Denis Plotnikov, qemu-devel Cc: kwolf, berto, qemu-block, armbru, den 29.04.2020 13:24, Max Reitz wrote: > On 28.04.20 22:00, Denis Plotnikov wrote: >> zstd significantly reduces cluster compression time. >> It provides better compression performance maintaining >> the same level of the compression ratio in comparison with >> zlib, which, at the moment, is the only compression >> method available. >> >> The performance test results: >> Test compresses and decompresses qemu qcow2 image with just >> installed rhel-7.6 guest. >> Image cluster size: 64K. Image on disk size: 2.2G >> >> The test was conducted with brd disk to reduce the influence >> of disk subsystem to the test results. >> The results is given in seconds. >> >> compress cmd: >> time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] >> src.img [zlib|zstd]_compressed.img >> decompress cmd >> time ./qemu-img convert -O qcow2 >> [zlib|zstd]_compressed.img uncompressed.img >> >> compression decompression >> zlib zstd zlib zstd >> ------------------------------------------------------------ >> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >> user 65.0 15.8 5.3 2.5 >> sys 3.3 0.2 2.0 2.0 >> >> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >> compressed image size in both cases: 1.4G >> >> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >> QAPI part: >> Acked-by: Markus Armbruster <armbru@redhat.com> >> --- >> docs/interop/qcow2.txt | 1 + >> configure | 2 +- >> qapi/block-core.json | 3 +- >> block/qcow2-threads.c | 169 +++++++++++++++++++++++++++++++++++++++++ >> block/qcow2.c | 7 ++ >> slirp | 2 +- >> 6 files changed, 181 insertions(+), 3 deletions(-) > > [...] > >> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >> index 7dbaf53489..a0b12e1b15 100644 >> --- a/block/qcow2-threads.c >> +++ b/block/qcow2-threads.c > > [...] > >> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >> + const void *src, size_t src_size) >> +{ > > [...] > >> + /* >> + * The compressed stream from the input buffer may consist of more >> + * than one zstd frame. > > Can it? If not, we must require it in the specification. Hmm. If at some point we'll want multi-threaded compression of one big (2M) cluster.. Could this be implemented with zstd lib, if multiple frames are allowed, will allowing multiple frames help? I don't know actually, but I think better not to forbid it. On the other hand, I don't see any benefit in large compressed clusters. At least, in our scenarios (for compressed backups) we use 64k compressed clusters, for good granularity of incremental backups (when for running vm we use 1M clusters). -- Best regards, Vladimir ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-29 10:37 ` Vladimir Sementsov-Ogievskiy @ 2020-04-29 12:17 ` Max Reitz 2020-04-29 13:02 ` Vladimir Sementsov-Ogievskiy 0 siblings, 1 reply; 21+ messages in thread From: Max Reitz @ 2020-04-29 12:17 UTC (permalink / raw) To: Vladimir Sementsov-Ogievskiy, Denis Plotnikov, qemu-devel Cc: kwolf, berto, qemu-block, armbru, den [-- Attachment #1.1: Type: text/plain, Size: 3630 bytes --] On 29.04.20 12:37, Vladimir Sementsov-Ogievskiy wrote: > 29.04.2020 13:24, Max Reitz wrote: >> On 28.04.20 22:00, Denis Plotnikov wrote: >>> zstd significantly reduces cluster compression time. >>> It provides better compression performance maintaining >>> the same level of the compression ratio in comparison with >>> zlib, which, at the moment, is the only compression >>> method available. >>> >>> The performance test results: >>> Test compresses and decompresses qemu qcow2 image with just >>> installed rhel-7.6 guest. >>> Image cluster size: 64K. Image on disk size: 2.2G >>> >>> The test was conducted with brd disk to reduce the influence >>> of disk subsystem to the test results. >>> The results is given in seconds. >>> >>> compress cmd: >>> time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] >>> src.img [zlib|zstd]_compressed.img >>> decompress cmd >>> time ./qemu-img convert -O qcow2 >>> [zlib|zstd]_compressed.img uncompressed.img >>> >>> compression decompression >>> zlib zstd zlib zstd >>> ------------------------------------------------------------ >>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >>> user 65.0 15.8 5.3 2.5 >>> sys 3.3 0.2 2.0 2.0 >>> >>> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >>> compressed image size in both cases: 1.4G >>> >>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>> QAPI part: >>> Acked-by: Markus Armbruster <armbru@redhat.com> >>> --- >>> docs/interop/qcow2.txt | 1 + >>> configure | 2 +- >>> qapi/block-core.json | 3 +- >>> block/qcow2-threads.c | 169 +++++++++++++++++++++++++++++++++++++++++ >>> block/qcow2.c | 7 ++ >>> slirp | 2 +- >>> 6 files changed, 181 insertions(+), 3 deletions(-) >> >> [...] >> >>> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >>> index 7dbaf53489..a0b12e1b15 100644 >>> --- a/block/qcow2-threads.c >>> +++ b/block/qcow2-threads.c >> >> [...] >> >>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >>> + const void *src, size_t src_size) >>> +{ >> >> [...] >> >>> + /* >>> + * The compressed stream from the input buffer may consist of more >>> + * than one zstd frame. >> >> Can it? > > If not, we must require it in the specification. Actually, now that you mention it, it would make sense anyway to add some note to the specification on what exactly compressed with zstd means. > Hmm. If at some point > we'll want multi-threaded compression of one big (2M) cluster.. Could > this be implemented with zstd lib, if multiple frames are allowed, will > allowing multiple frames help? I don't know actually, but I think better > not to forbid it. On the other hand, I don't see any benefit in large > compressed clusters. At least, in our scenarios (for compressed backups) > we use 64k compressed clusters, for good granularity of incremental > backups (when for running vm we use 1M clusters). Is it really that important? Naïvely, it sounds rather complicated to introduce multithreading into block drivers. (Also, as for compression, it can only be used in backup scenarios anyway, where you write many clusters at once. So parallelism on the cluster level should sufficient to get high usage, and it would benefit all compression types and cluster sizes.) Max [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-29 12:17 ` Max Reitz @ 2020-04-29 13:02 ` Vladimir Sementsov-Ogievskiy 2020-04-29 13:49 ` Eric Blake 2020-04-30 8:26 ` Max Reitz 0 siblings, 2 replies; 21+ messages in thread From: Vladimir Sementsov-Ogievskiy @ 2020-04-29 13:02 UTC (permalink / raw) To: Max Reitz, Denis Plotnikov, qemu-devel Cc: kwolf, berto, qemu-block, armbru, den 29.04.2020 15:17, Max Reitz wrote: > On 29.04.20 12:37, Vladimir Sementsov-Ogievskiy wrote: >> 29.04.2020 13:24, Max Reitz wrote: >>> On 28.04.20 22:00, Denis Plotnikov wrote: >>>> zstd significantly reduces cluster compression time. >>>> It provides better compression performance maintaining >>>> the same level of the compression ratio in comparison with >>>> zlib, which, at the moment, is the only compression >>>> method available. >>>> >>>> The performance test results: >>>> Test compresses and decompresses qemu qcow2 image with just >>>> installed rhel-7.6 guest. >>>> Image cluster size: 64K. Image on disk size: 2.2G >>>> >>>> The test was conducted with brd disk to reduce the influence >>>> of disk subsystem to the test results. >>>> The results is given in seconds. >>>> >>>> compress cmd: >>>> time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] >>>> src.img [zlib|zstd]_compressed.img >>>> decompress cmd >>>> time ./qemu-img convert -O qcow2 >>>> [zlib|zstd]_compressed.img uncompressed.img >>>> >>>> compression decompression >>>> zlib zstd zlib zstd >>>> ------------------------------------------------------------ >>>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >>>> user 65.0 15.8 5.3 2.5 >>>> sys 3.3 0.2 2.0 2.0 >>>> >>>> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >>>> compressed image size in both cases: 1.4G >>>> >>>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>>> QAPI part: >>>> Acked-by: Markus Armbruster <armbru@redhat.com> >>>> --- >>>> docs/interop/qcow2.txt | 1 + >>>> configure | 2 +- >>>> qapi/block-core.json | 3 +- >>>> block/qcow2-threads.c | 169 +++++++++++++++++++++++++++++++++++++++++ >>>> block/qcow2.c | 7 ++ >>>> slirp | 2 +- >>>> 6 files changed, 181 insertions(+), 3 deletions(-) >>> >>> [...] >>> >>>> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >>>> index 7dbaf53489..a0b12e1b15 100644 >>>> --- a/block/qcow2-threads.c >>>> +++ b/block/qcow2-threads.c >>> >>> [...] >>> >>>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >>>> + const void *src, size_t src_size) >>>> +{ >>> >>> [...] >>> >>>> + /* >>>> + * The compressed stream from the input buffer may consist of more >>>> + * than one zstd frame. >>> >>> Can it? >> >> If not, we must require it in the specification. > > Actually, now that you mention it, it would make sense anyway to add > some note to the specification on what exactly compressed with zstd means. > >> Hmm. If at some point >> we'll want multi-threaded compression of one big (2M) cluster.. Could >> this be implemented with zstd lib, if multiple frames are allowed, will >> allowing multiple frames help? I don't know actually, but I think better >> not to forbid it. On the other hand, I don't see any benefit in large >> compressed clusters. At least, in our scenarios (for compressed backups) >> we use 64k compressed clusters, for good granularity of incremental >> backups (when for running vm we use 1M clusters). > > Is it really that important? Naïvely, it sounds rather complicated to > introduce multithreading into block drivers. It is already here: compression and encryption already multithreaded. But of course, one cluster is handled in one thread. > > (Also, as for compression, it can only be used in backup scenarios > anyway, where you write many clusters at once. So parallelism on the > cluster level should sufficient to get high usage, and it would benefit > all compression types and cluster sizes.) > Yes it works in this way already :) === So, we don't know do we want one frame restriction or not. Do you have a preference? -- Best regards, Vladimir ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-29 13:02 ` Vladimir Sementsov-Ogievskiy @ 2020-04-29 13:49 ` Eric Blake 2020-04-30 8:26 ` Max Reitz 1 sibling, 0 replies; 21+ messages in thread From: Eric Blake @ 2020-04-29 13:49 UTC (permalink / raw) To: Vladimir Sementsov-Ogievskiy, Max Reitz, Denis Plotnikov, qemu-devel Cc: kwolf, den, berto, armbru, qemu-block On 4/29/20 8:02 AM, Vladimir Sementsov-Ogievskiy wrote: >>>>> + /* >>>>> + * The compressed stream from the input buffer may consist of >>>>> more >>>>> + * than one zstd frame. >>>> >>>> Can it? >>> >>> If not, we must require it in the specification. >> >> Actually, now that you mention it, it would make sense anyway to add >> some note to the specification on what exactly compressed with zstd >> means. > So, we don't know do we want one frame restriction or not. Do you have a > preference? > I'm a fan of 'be strict in what you produce, liberal in what you accept'. While our implementation always produces only a single frame of compressed data, I think our decoder should be prepared to see more than one frame from other implementations, as that is more liberal than tightening the specification to require that encoding must produce exactly one frame. -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-29 13:02 ` Vladimir Sementsov-Ogievskiy 2020-04-29 13:49 ` Eric Blake @ 2020-04-30 8:26 ` Max Reitz 2020-04-30 9:48 ` Denis Plotnikov 1 sibling, 1 reply; 21+ messages in thread From: Max Reitz @ 2020-04-30 8:26 UTC (permalink / raw) To: Vladimir Sementsov-Ogievskiy, Denis Plotnikov, qemu-devel Cc: kwolf, berto, qemu-block, armbru, den [-- Attachment #1.1: Type: text/plain, Size: 4450 bytes --] On 29.04.20 15:02, Vladimir Sementsov-Ogievskiy wrote: > 29.04.2020 15:17, Max Reitz wrote: >> On 29.04.20 12:37, Vladimir Sementsov-Ogievskiy wrote: >>> 29.04.2020 13:24, Max Reitz wrote: >>>> On 28.04.20 22:00, Denis Plotnikov wrote: >>>>> zstd significantly reduces cluster compression time. >>>>> It provides better compression performance maintaining >>>>> the same level of the compression ratio in comparison with >>>>> zlib, which, at the moment, is the only compression >>>>> method available. >>>>> >>>>> The performance test results: >>>>> Test compresses and decompresses qemu qcow2 image with just >>>>> installed rhel-7.6 guest. >>>>> Image cluster size: 64K. Image on disk size: 2.2G >>>>> >>>>> The test was conducted with brd disk to reduce the influence >>>>> of disk subsystem to the test results. >>>>> The results is given in seconds. >>>>> >>>>> compress cmd: >>>>> time ./qemu-img convert -O qcow2 -c -o >>>>> compression_type=[zlib|zstd] >>>>> src.img [zlib|zstd]_compressed.img >>>>> decompress cmd >>>>> time ./qemu-img convert -O qcow2 >>>>> [zlib|zstd]_compressed.img uncompressed.img >>>>> >>>>> compression decompression >>>>> zlib zstd zlib zstd >>>>> ------------------------------------------------------------ >>>>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >>>>> user 65.0 15.8 5.3 2.5 >>>>> sys 3.3 0.2 2.0 2.0 >>>>> >>>>> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >>>>> compressed image size in both cases: 1.4G >>>>> >>>>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>>>> QAPI part: >>>>> Acked-by: Markus Armbruster <armbru@redhat.com> >>>>> --- >>>>> docs/interop/qcow2.txt | 1 + >>>>> configure | 2 +- >>>>> qapi/block-core.json | 3 +- >>>>> block/qcow2-threads.c | 169 >>>>> +++++++++++++++++++++++++++++++++++++++++ >>>>> block/qcow2.c | 7 ++ >>>>> slirp | 2 +- >>>>> 6 files changed, 181 insertions(+), 3 deletions(-) >>>> >>>> [...] >>>> >>>>> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >>>>> index 7dbaf53489..a0b12e1b15 100644 >>>>> --- a/block/qcow2-threads.c >>>>> +++ b/block/qcow2-threads.c >>>> >>>> [...] >>>> >>>>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >>>>> + const void *src, size_t >>>>> src_size) >>>>> +{ >>>> >>>> [...] >>>> >>>>> + /* >>>>> + * The compressed stream from the input buffer may consist of >>>>> more >>>>> + * than one zstd frame. >>>> >>>> Can it? >>> >>> If not, we must require it in the specification. >> >> Actually, now that you mention it, it would make sense anyway to add >> some note to the specification on what exactly compressed with zstd >> means. >> >>> Hmm. If at some point >>> we'll want multi-threaded compression of one big (2M) cluster.. Could >>> this be implemented with zstd lib, if multiple frames are allowed, will >>> allowing multiple frames help? I don't know actually, but I think better >>> not to forbid it. On the other hand, I don't see any benefit in large >>> compressed clusters. At least, in our scenarios (for compressed backups) >>> we use 64k compressed clusters, for good granularity of incremental >>> backups (when for running vm we use 1M clusters). >> >> Is it really that important? Naïvely, it sounds rather complicated to >> introduce multithreading into block drivers. > > It is already here: compression and encryption already multithreaded. > But of course, one cluster is handled in one thread. Ah, good. I forgot. >> (Also, as for compression, it can only be used in backup scenarios >> anyway, where you write many clusters at once. So parallelism on the >> cluster level should sufficient to get high usage, and it would benefit >> all compression types and cluster sizes.) >> > > Yes it works in this way already :) Well, OK then. > So, we don't know do we want one frame restriction or not. Do you have a > preference? *shrug* Seems like it would be preferential to allow multiple frames still. A note in the spec would be nice (i.e., streaming format, multiple frames per cluster possible). Max [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-30 8:26 ` Max Reitz @ 2020-04-30 9:48 ` Denis Plotnikov 2020-04-30 11:47 ` Max Reitz 0 siblings, 1 reply; 21+ messages in thread From: Denis Plotnikov @ 2020-04-30 9:48 UTC (permalink / raw) To: Max Reitz, Vladimir Sementsov-Ogievskiy, qemu-devel Cc: kwolf, berto, qemu-block, armbru, den On 30.04.2020 11:26, Max Reitz wrote: > On 29.04.20 15:02, Vladimir Sementsov-Ogievskiy wrote: >> 29.04.2020 15:17, Max Reitz wrote: >>> On 29.04.20 12:37, Vladimir Sementsov-Ogievskiy wrote: >>>> 29.04.2020 13:24, Max Reitz wrote: >>>>> On 28.04.20 22:00, Denis Plotnikov wrote: >>>>>> zstd significantly reduces cluster compression time. >>>>>> It provides better compression performance maintaining >>>>>> the same level of the compression ratio in comparison with >>>>>> zlib, which, at the moment, is the only compression >>>>>> method available. >>>>>> >>>>>> The performance test results: >>>>>> Test compresses and decompresses qemu qcow2 image with just >>>>>> installed rhel-7.6 guest. >>>>>> Image cluster size: 64K. Image on disk size: 2.2G >>>>>> >>>>>> The test was conducted with brd disk to reduce the influence >>>>>> of disk subsystem to the test results. >>>>>> The results is given in seconds. >>>>>> >>>>>> compress cmd: >>>>>> time ./qemu-img convert -O qcow2 -c -o >>>>>> compression_type=[zlib|zstd] >>>>>> src.img [zlib|zstd]_compressed.img >>>>>> decompress cmd >>>>>> time ./qemu-img convert -O qcow2 >>>>>> [zlib|zstd]_compressed.img uncompressed.img >>>>>> >>>>>> compression decompression >>>>>> zlib zstd zlib zstd >>>>>> ------------------------------------------------------------ >>>>>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >>>>>> user 65.0 15.8 5.3 2.5 >>>>>> sys 3.3 0.2 2.0 2.0 >>>>>> >>>>>> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >>>>>> compressed image size in both cases: 1.4G >>>>>> >>>>>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>>>>> QAPI part: >>>>>> Acked-by: Markus Armbruster <armbru@redhat.com> >>>>>> --- >>>>>> docs/interop/qcow2.txt | 1 + >>>>>> configure | 2 +- >>>>>> qapi/block-core.json | 3 +- >>>>>> block/qcow2-threads.c | 169 >>>>>> +++++++++++++++++++++++++++++++++++++++++ >>>>>> block/qcow2.c | 7 ++ >>>>>> slirp | 2 +- >>>>>> 6 files changed, 181 insertions(+), 3 deletions(-) >>>>> [...] >>>>> >>>>>> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >>>>>> index 7dbaf53489..a0b12e1b15 100644 >>>>>> --- a/block/qcow2-threads.c >>>>>> +++ b/block/qcow2-threads.c >>>>> [...] >>>>> >>>>>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >>>>>> + const void *src, size_t >>>>>> src_size) >>>>>> +{ >>>>> [...] >>>>> >>>>>> + /* >>>>>> + * The compressed stream from the input buffer may consist of >>>>>> more >>>>>> + * than one zstd frame. >>>>> Can it? >>>> If not, we must require it in the specification. >>> Actually, now that you mention it, it would make sense anyway to add >>> some note to the specification on what exactly compressed with zstd >>> means. >>> >>>> Hmm. If at some point >>>> we'll want multi-threaded compression of one big (2M) cluster.. Could >>>> this be implemented with zstd lib, if multiple frames are allowed, will >>>> allowing multiple frames help? I don't know actually, but I think better >>>> not to forbid it. On the other hand, I don't see any benefit in large >>>> compressed clusters. At least, in our scenarios (for compressed backups) >>>> we use 64k compressed clusters, for good granularity of incremental >>>> backups (when for running vm we use 1M clusters). >>> Is it really that important? Naïvely, it sounds rather complicated to >>> introduce multithreading into block drivers. >> It is already here: compression and encryption already multithreaded. >> But of course, one cluster is handled in one thread. > Ah, good. I forgot. > >>> (Also, as for compression, it can only be used in backup scenarios >>> anyway, where you write many clusters at once. So parallelism on the >>> cluster level should sufficient to get high usage, and it would benefit >>> all compression types and cluster sizes.) >>> >> Yes it works in this way already :) > Well, OK then. > >> So, we don't know do we want one frame restriction or not. Do you have a >> preference? > *shrug* > > Seems like it would be preferential to allow multiple frames still. A > note in the spec would be nice (i.e., streaming format, multiple frames > per cluster possible). We don't mention anything about zlib compressing details in the spec. If we mention anything about ZSTD compressing details we'll have to do it for zlib as well. So, I think we have two possibilities for the spec: 1. mention for both 2. don't mention at all I think the 2nd is better. It gives more degree of freedom for the future improvements. and we've already covered both cases (one frame, may frames) in the code. I'm note sure I'm right. Any other opinions? Denis > > Max > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-30 9:48 ` Denis Plotnikov @ 2020-04-30 11:47 ` Max Reitz 2020-04-30 13:56 ` Denis Plotnikov 0 siblings, 1 reply; 21+ messages in thread From: Max Reitz @ 2020-04-30 11:47 UTC (permalink / raw) To: Denis Plotnikov, Vladimir Sementsov-Ogievskiy, qemu-devel Cc: kwolf, berto, qemu-block, armbru, den [-- Attachment #1.1: Type: text/plain, Size: 5961 bytes --] On 30.04.20 11:48, Denis Plotnikov wrote: > > > On 30.04.2020 11:26, Max Reitz wrote: >> On 29.04.20 15:02, Vladimir Sementsov-Ogievskiy wrote: >>> 29.04.2020 15:17, Max Reitz wrote: >>>> On 29.04.20 12:37, Vladimir Sementsov-Ogievskiy wrote: >>>>> 29.04.2020 13:24, Max Reitz wrote: >>>>>> On 28.04.20 22:00, Denis Plotnikov wrote: >>>>>>> zstd significantly reduces cluster compression time. >>>>>>> It provides better compression performance maintaining >>>>>>> the same level of the compression ratio in comparison with >>>>>>> zlib, which, at the moment, is the only compression >>>>>>> method available. >>>>>>> >>>>>>> The performance test results: >>>>>>> Test compresses and decompresses qemu qcow2 image with just >>>>>>> installed rhel-7.6 guest. >>>>>>> Image cluster size: 64K. Image on disk size: 2.2G >>>>>>> >>>>>>> The test was conducted with brd disk to reduce the influence >>>>>>> of disk subsystem to the test results. >>>>>>> The results is given in seconds. >>>>>>> >>>>>>> compress cmd: >>>>>>> time ./qemu-img convert -O qcow2 -c -o >>>>>>> compression_type=[zlib|zstd] >>>>>>> src.img [zlib|zstd]_compressed.img >>>>>>> decompress cmd >>>>>>> time ./qemu-img convert -O qcow2 >>>>>>> [zlib|zstd]_compressed.img uncompressed.img >>>>>>> >>>>>>> compression decompression >>>>>>> zlib zstd zlib zstd >>>>>>> ------------------------------------------------------------ >>>>>>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >>>>>>> user 65.0 15.8 5.3 2.5 >>>>>>> sys 3.3 0.2 2.0 2.0 >>>>>>> >>>>>>> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >>>>>>> compressed image size in both cases: 1.4G >>>>>>> >>>>>>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>>>>>> QAPI part: >>>>>>> Acked-by: Markus Armbruster <armbru@redhat.com> >>>>>>> --- >>>>>>> docs/interop/qcow2.txt | 1 + >>>>>>> configure | 2 +- >>>>>>> qapi/block-core.json | 3 +- >>>>>>> block/qcow2-threads.c | 169 >>>>>>> +++++++++++++++++++++++++++++++++++++++++ >>>>>>> block/qcow2.c | 7 ++ >>>>>>> slirp | 2 +- >>>>>>> 6 files changed, 181 insertions(+), 3 deletions(-) >>>>>> [...] >>>>>> >>>>>>> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >>>>>>> index 7dbaf53489..a0b12e1b15 100644 >>>>>>> --- a/block/qcow2-threads.c >>>>>>> +++ b/block/qcow2-threads.c >>>>>> [...] >>>>>> >>>>>>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >>>>>>> + const void *src, size_t >>>>>>> src_size) >>>>>>> +{ >>>>>> [...] >>>>>> >>>>>>> + /* >>>>>>> + * The compressed stream from the input buffer may consist of >>>>>>> more >>>>>>> + * than one zstd frame. >>>>>> Can it? >>>>> If not, we must require it in the specification. >>>> Actually, now that you mention it, it would make sense anyway to add >>>> some note to the specification on what exactly compressed with zstd >>>> means. >>>> >>>>> Hmm. If at some point >>>>> we'll want multi-threaded compression of one big (2M) cluster.. Could >>>>> this be implemented with zstd lib, if multiple frames are allowed, >>>>> will >>>>> allowing multiple frames help? I don't know actually, but I think >>>>> better >>>>> not to forbid it. On the other hand, I don't see any benefit in large >>>>> compressed clusters. At least, in our scenarios (for compressed >>>>> backups) >>>>> we use 64k compressed clusters, for good granularity of incremental >>>>> backups (when for running vm we use 1M clusters). >>>> Is it really that important? Naïvely, it sounds rather complicated to >>>> introduce multithreading into block drivers. >>> It is already here: compression and encryption already multithreaded. >>> But of course, one cluster is handled in one thread. >> Ah, good. I forgot. >> >>>> (Also, as for compression, it can only be used in backup scenarios >>>> anyway, where you write many clusters at once. So parallelism on the >>>> cluster level should sufficient to get high usage, and it would benefit >>>> all compression types and cluster sizes.) >>>> >>> Yes it works in this way already :) >> Well, OK then. >> >>> So, we don't know do we want one frame restriction or not. Do you have a >>> preference? >> *shrug* >> >> Seems like it would be preferential to allow multiple frames still. A >> note in the spec would be nice (i.e., streaming format, multiple frames >> per cluster possible). > > We don't mention anything about zlib compressing details in the spec. Yep. Which is bad enough. > If we mention anything about ZSTD compressing details we'll have to do > it for > zlib as well. I personally don’t like “If you can’t make it perfect, you shouldn’t do it at all”. Mentioning it for zstd would still be an improvement. Also, I believe that “zlib compression” is pretty much unambiguous, considering all the code does is call deflate()/inflate(). I’m not saying we need to amend the spec in this series, but I don’t see a good argument against doing so at some point. > So, I think we have two possibilities for the spec: > 1. mention for both > 2. don't mention at all > > I think the 2nd is better. It gives more degree of freedom for the > future improvements. No, it absolutely doesn’t. There is a de-facto format, namely what qemu accepts. Changing that would be an incompatible change. Just because we don’t write what’s allowed into the spec doesn’t change that fact. > and we've already covered both cases (one frame, may frames) in the code. There are still different zstd formats, namely streaming or not streaming. That’s what should be mentioned. Max [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-30 11:47 ` Max Reitz @ 2020-04-30 13:56 ` Denis Plotnikov 2020-05-04 7:53 ` Max Reitz 0 siblings, 1 reply; 21+ messages in thread From: Denis Plotnikov @ 2020-04-30 13:56 UTC (permalink / raw) To: Max Reitz, Vladimir Sementsov-Ogievskiy, qemu-devel Cc: kwolf, berto, qemu-block, armbru, den On 30.04.2020 14:47, Max Reitz wrote: > On 30.04.20 11:48, Denis Plotnikov wrote: >> >> On 30.04.2020 11:26, Max Reitz wrote: >>> On 29.04.20 15:02, Vladimir Sementsov-Ogievskiy wrote: >>>> 29.04.2020 15:17, Max Reitz wrote: >>>>> On 29.04.20 12:37, Vladimir Sementsov-Ogievskiy wrote: >>>>>> 29.04.2020 13:24, Max Reitz wrote: >>>>>>> On 28.04.20 22:00, Denis Plotnikov wrote: >>>>>>>> zstd significantly reduces cluster compression time. >>>>>>>> It provides better compression performance maintaining >>>>>>>> the same level of the compression ratio in comparison with >>>>>>>> zlib, which, at the moment, is the only compression >>>>>>>> method available. >>>>>>>> >>>>>>>> The performance test results: >>>>>>>> Test compresses and decompresses qemu qcow2 image with just >>>>>>>> installed rhel-7.6 guest. >>>>>>>> Image cluster size: 64K. Image on disk size: 2.2G >>>>>>>> >>>>>>>> The test was conducted with brd disk to reduce the influence >>>>>>>> of disk subsystem to the test results. >>>>>>>> The results is given in seconds. >>>>>>>> >>>>>>>> compress cmd: >>>>>>>> time ./qemu-img convert -O qcow2 -c -o >>>>>>>> compression_type=[zlib|zstd] >>>>>>>> src.img [zlib|zstd]_compressed.img >>>>>>>> decompress cmd >>>>>>>> time ./qemu-img convert -O qcow2 >>>>>>>> [zlib|zstd]_compressed.img uncompressed.img >>>>>>>> >>>>>>>> compression decompression >>>>>>>> zlib zstd zlib zstd >>>>>>>> ------------------------------------------------------------ >>>>>>>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >>>>>>>> user 65.0 15.8 5.3 2.5 >>>>>>>> sys 3.3 0.2 2.0 2.0 >>>>>>>> >>>>>>>> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >>>>>>>> compressed image size in both cases: 1.4G >>>>>>>> >>>>>>>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>>>>>>> QAPI part: >>>>>>>> Acked-by: Markus Armbruster <armbru@redhat.com> >>>>>>>> --- >>>>>>>> docs/interop/qcow2.txt | 1 + >>>>>>>> configure | 2 +- >>>>>>>> qapi/block-core.json | 3 +- >>>>>>>> block/qcow2-threads.c | 169 >>>>>>>> +++++++++++++++++++++++++++++++++++++++++ >>>>>>>> block/qcow2.c | 7 ++ >>>>>>>> slirp | 2 +- >>>>>>>> 6 files changed, 181 insertions(+), 3 deletions(-) >>>>>>> [...] >>>>>>> >>>>>>>> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >>>>>>>> index 7dbaf53489..a0b12e1b15 100644 >>>>>>>> --- a/block/qcow2-threads.c >>>>>>>> +++ b/block/qcow2-threads.c >>>>>>> [...] >>>>>>> >>>>>>>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >>>>>>>> + const void *src, size_t >>>>>>>> src_size) >>>>>>>> +{ >>>>>>> [...] >>>>>>> >>>>>>>> + /* >>>>>>>> + * The compressed stream from the input buffer may consist of >>>>>>>> more >>>>>>>> + * than one zstd frame. >>>>>>> Can it? >>>>>> If not, we must require it in the specification. >>>>> Actually, now that you mention it, it would make sense anyway to add >>>>> some note to the specification on what exactly compressed with zstd >>>>> means. >>>>> >>>>>> Hmm. If at some point >>>>>> we'll want multi-threaded compression of one big (2M) cluster.. Could >>>>>> this be implemented with zstd lib, if multiple frames are allowed, >>>>>> will >>>>>> allowing multiple frames help? I don't know actually, but I think >>>>>> better >>>>>> not to forbid it. On the other hand, I don't see any benefit in large >>>>>> compressed clusters. At least, in our scenarios (for compressed >>>>>> backups) >>>>>> we use 64k compressed clusters, for good granularity of incremental >>>>>> backups (when for running vm we use 1M clusters). >>>>> Is it really that important? Naïvely, it sounds rather complicated to >>>>> introduce multithreading into block drivers. >>>> It is already here: compression and encryption already multithreaded. >>>> But of course, one cluster is handled in one thread. >>> Ah, good. I forgot. >>> >>>>> (Also, as for compression, it can only be used in backup scenarios >>>>> anyway, where you write many clusters at once. So parallelism on the >>>>> cluster level should sufficient to get high usage, and it would benefit >>>>> all compression types and cluster sizes.) >>>>> >>>> Yes it works in this way already :) >>> Well, OK then. >>> >>>> So, we don't know do we want one frame restriction or not. Do you have a >>>> preference? >>> *shrug* >>> >>> Seems like it would be preferential to allow multiple frames still. A >>> note in the spec would be nice (i.e., streaming format, multiple frames >>> per cluster possible). >> We don't mention anything about zlib compressing details in the spec. > Yep. Which is bad enough. > >> If we mention anything about ZSTD compressing details we'll have to do >> it for >> zlib as well. > I personally don’t like “If you can’t make it perfect, you shouldn’t do > it at all”. Mentioning it for zstd would still be an improvement. Good approach. I like it. But I'm trying to be cautious. > > Also, I believe that “zlib compression” is pretty much unambiguous, > considering all the code does is call deflate()/inflate(). > > I’m not saying we need to amend the spec in this series, but I don’t see > a good argument against doing so at some point. > >> So, I think we have two possibilities for the spec: >> 1. mention for both >> 2. don't mention at all >> >> I think the 2nd is better. It gives more degree of freedom for the >> future improvements. > No, it absolutely doesn’t. There is a de-facto format, namely what qemu > accepts. Changing that would be an incompatible change. Just because > we don’t write what’s allowed into the spec doesn’t change that fact. > >> and we've already covered both cases (one frame, may frames) in the code. > There are still different zstd formats, namely streaming or not > streaming. That’s what should be mentioned. It looks like the ZSTD format is always the same. The ZSTD interface is different: for some reason the simple zstd_decompress() wants to know the size of data to decompress From zstd doc: *size_t ZSTD_decompress( void* dst, size_t dstCapacity, const void* src, size_t compressedSize); * `compressedSize` : must be the _exact_ size of some number of compressed and/or skippable frames. I made a test (based on Vladimir's code) to check it: // compile with gcc -lzstd -g test_zstd.c -o test_zstd #include <stdio.h> #include <assert.h> #include <zstd.h> #include <zstd_errors.h> int main() { char buf1[] = "erbebewbwe"; char buf2[100]; char buf3[100]; int ret; ZSTD_outBuffer output; ZSTD_inBuffer input; ret = ZSTD_compress(buf2, sizeof(buf2), buf1, sizeof(buf1), 5); printf("ret: %d\n", ret); ZSTD_DCtx *dctx = ZSTD_createDCtx(); input = (ZSTD_inBuffer){buf2, ret, 0}; output = (ZSTD_outBuffer){buf3, sizeof(buf3), 0}; ret = ZSTD_decompressStream(dctx, &output, &input); printf("ret: %d, input.pos: %ld, output.pos: %ld\n", ret, input.pos, output.pos); printf("To compress: %s\n", buf1); buf3[output.pos] = 0; printf("Uncompressed: %s\n", buf3); return 0; } And it works fine. We use streaming semantics just to be consistent with the interfaces (stream_compress/stream_decompress), otherwise we could use simple_compress/stream_decompress Denis > > Max > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-30 13:56 ` Denis Plotnikov @ 2020-05-04 7:53 ` Max Reitz 0 siblings, 0 replies; 21+ messages in thread From: Max Reitz @ 2020-05-04 7:53 UTC (permalink / raw) To: Denis Plotnikov, Vladimir Sementsov-Ogievskiy, qemu-devel Cc: kwolf, berto, qemu-block, armbru, den [-- Attachment #1.1: Type: text/plain, Size: 8047 bytes --] On 30.04.20 15:56, Denis Plotnikov wrote: > > > On 30.04.2020 14:47, Max Reitz wrote: >> On 30.04.20 11:48, Denis Plotnikov wrote: >>> >>> On 30.04.2020 11:26, Max Reitz wrote: >>>> On 29.04.20 15:02, Vladimir Sementsov-Ogievskiy wrote: >>>>> 29.04.2020 15:17, Max Reitz wrote: >>>>>> On 29.04.20 12:37, Vladimir Sementsov-Ogievskiy wrote: >>>>>>> 29.04.2020 13:24, Max Reitz wrote: >>>>>>>> On 28.04.20 22:00, Denis Plotnikov wrote: >>>>>>>>> zstd significantly reduces cluster compression time. >>>>>>>>> It provides better compression performance maintaining >>>>>>>>> the same level of the compression ratio in comparison with >>>>>>>>> zlib, which, at the moment, is the only compression >>>>>>>>> method available. >>>>>>>>> >>>>>>>>> The performance test results: >>>>>>>>> Test compresses and decompresses qemu qcow2 image with just >>>>>>>>> installed rhel-7.6 guest. >>>>>>>>> Image cluster size: 64K. Image on disk size: 2.2G >>>>>>>>> >>>>>>>>> The test was conducted with brd disk to reduce the influence >>>>>>>>> of disk subsystem to the test results. >>>>>>>>> The results is given in seconds. >>>>>>>>> >>>>>>>>> compress cmd: >>>>>>>>> time ./qemu-img convert -O qcow2 -c -o >>>>>>>>> compression_type=[zlib|zstd] >>>>>>>>> src.img [zlib|zstd]_compressed.img >>>>>>>>> decompress cmd >>>>>>>>> time ./qemu-img convert -O qcow2 >>>>>>>>> [zlib|zstd]_compressed.img uncompressed.img >>>>>>>>> >>>>>>>>> compression decompression >>>>>>>>> zlib zstd zlib zstd >>>>>>>>> ------------------------------------------------------------ >>>>>>>>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >>>>>>>>> user 65.0 15.8 5.3 2.5 >>>>>>>>> sys 3.3 0.2 2.0 2.0 >>>>>>>>> >>>>>>>>> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >>>>>>>>> compressed image size in both cases: 1.4G >>>>>>>>> >>>>>>>>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>>>>>>>> QAPI part: >>>>>>>>> Acked-by: Markus Armbruster <armbru@redhat.com> >>>>>>>>> --- >>>>>>>>> docs/interop/qcow2.txt | 1 + >>>>>>>>> configure | 2 +- >>>>>>>>> qapi/block-core.json | 3 +- >>>>>>>>> block/qcow2-threads.c | 169 >>>>>>>>> +++++++++++++++++++++++++++++++++++++++++ >>>>>>>>> block/qcow2.c | 7 ++ >>>>>>>>> slirp | 2 +- >>>>>>>>> 6 files changed, 181 insertions(+), 3 deletions(-) >>>>>>>> [...] >>>>>>>> >>>>>>>>> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >>>>>>>>> index 7dbaf53489..a0b12e1b15 100644 >>>>>>>>> --- a/block/qcow2-threads.c >>>>>>>>> +++ b/block/qcow2-threads.c >>>>>>>> [...] >>>>>>>> >>>>>>>>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t >>>>>>>>> dest_size, >>>>>>>>> + const void *src, size_t >>>>>>>>> src_size) >>>>>>>>> +{ >>>>>>>> [...] >>>>>>>> >>>>>>>>> + /* >>>>>>>>> + * The compressed stream from the input buffer may consist of >>>>>>>>> more >>>>>>>>> + * than one zstd frame. >>>>>>>> Can it? >>>>>>> If not, we must require it in the specification. >>>>>> Actually, now that you mention it, it would make sense anyway to add >>>>>> some note to the specification on what exactly compressed with zstd >>>>>> means. >>>>>> >>>>>>> Hmm. If at some point >>>>>>> we'll want multi-threaded compression of one big (2M) cluster.. >>>>>>> Could >>>>>>> this be implemented with zstd lib, if multiple frames are allowed, >>>>>>> will >>>>>>> allowing multiple frames help? I don't know actually, but I think >>>>>>> better >>>>>>> not to forbid it. On the other hand, I don't see any benefit in >>>>>>> large >>>>>>> compressed clusters. At least, in our scenarios (for compressed >>>>>>> backups) >>>>>>> we use 64k compressed clusters, for good granularity of incremental >>>>>>> backups (when for running vm we use 1M clusters). >>>>>> Is it really that important? Naïvely, it sounds rather >>>>>> complicated to >>>>>> introduce multithreading into block drivers. >>>>> It is already here: compression and encryption already multithreaded. >>>>> But of course, one cluster is handled in one thread. >>>> Ah, good. I forgot. >>>> >>>>>> (Also, as for compression, it can only be used in backup scenarios >>>>>> anyway, where you write many clusters at once. So parallelism on the >>>>>> cluster level should sufficient to get high usage, and it would >>>>>> benefit >>>>>> all compression types and cluster sizes.) >>>>>> >>>>> Yes it works in this way already :) >>>> Well, OK then. >>>> >>>>> So, we don't know do we want one frame restriction or not. Do you >>>>> have a >>>>> preference? >>>> *shrug* >>>> >>>> Seems like it would be preferential to allow multiple frames still. A >>>> note in the spec would be nice (i.e., streaming format, multiple frames >>>> per cluster possible). >>> We don't mention anything about zlib compressing details in the spec. >> Yep. Which is bad enough. >> >>> If we mention anything about ZSTD compressing details we'll have to do >>> it for >>> zlib as well. >> I personally don’t like “If you can’t make it perfect, you shouldn’t do >> it at all”. Mentioning it for zstd would still be an improvement. > > Good approach. I like it. But I'm trying to be cautious. >> >> Also, I believe that “zlib compression” is pretty much unambiguous, >> considering all the code does is call deflate()/inflate(). >> >> I’m not saying we need to amend the spec in this series, but I don’t see >> a good argument against doing so at some point. >> >>> So, I think we have two possibilities for the spec: >>> 1. mention for both >>> 2. don't mention at all >>> >>> I think the 2nd is better. It gives more degree of freedom for the >>> future improvements. >> No, it absolutely doesn’t. There is a de-facto format, namely what qemu >> accepts. Changing that would be an incompatible change. Just because >> we don’t write what’s allowed into the spec doesn’t change that fact. >> >>> and we've already covered both cases (one frame, may frames) in the >>> code. >> There are still different zstd formats, namely streaming or not >> streaming. That’s what should be mentioned. > > It looks like the ZSTD format is always the same. > The ZSTD interface is different: for some reason the simple > zstd_decompress() > wants to know the size of data to decompress > > From zstd doc: > *size_t ZSTD_decompress( void* dst, size_t dstCapacity, const void* src, > size_t compressedSize); * > > `compressedSize` : must be the _exact_ size of some number of compressed > and/or skippable frames. That’s... interesting. > I made a test (based on Vladimir's code) to check it: > > // compile with gcc -lzstd -g test_zstd.c -o test_zstd > > #include <stdio.h> #include <assert.h> #include <zstd.h> #include > <zstd_errors.h> int main() { char buf1[] = "erbebewbwe"; char buf2[100]; > char buf3[100]; int ret; ZSTD_outBuffer output; ZSTD_inBuffer input; ret > = ZSTD_compress(buf2, sizeof(buf2), buf1, sizeof(buf1), 5); printf("ret: > %d\n", ret); ZSTD_DCtx *dctx = ZSTD_createDCtx(); input = > (ZSTD_inBuffer){buf2, ret, 0}; output = (ZSTD_outBuffer){buf3, > sizeof(buf3), 0}; ret = ZSTD_decompressStream(dctx, &output, &input); > printf("ret: %d, input.pos: %ld, output.pos: %ld\n", ret, input.pos, > output.pos); printf("To compress: %s\n", buf1); buf3[output.pos] = 0; > printf("Uncompressed: %s\n", buf3); return 0; } > > And it works fine. > > We use streaming semantics just to be consistent with the interfaces > (stream_compress/stream_decompress), otherwise > > we could use simple_compress/stream_decompress OK, if there’s just a single format and we accept multiple frames, then there’s indeed no need to document it. Max [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-29 10:24 ` Max Reitz 2020-04-29 10:37 ` Vladimir Sementsov-Ogievskiy @ 2020-04-29 10:38 ` Denis Plotnikov 2020-04-29 12:24 ` Max Reitz 1 sibling, 1 reply; 21+ messages in thread From: Denis Plotnikov @ 2020-04-29 10:38 UTC (permalink / raw) To: Max Reitz, qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, den On 29.04.2020 13:24, Max Reitz wrote: > On 28.04.20 22:00, Denis Plotnikov wrote: >> zstd significantly reduces cluster compression time. >> It provides better compression performance maintaining >> the same level of the compression ratio in comparison with >> zlib, which, at the moment, is the only compression >> method available. >> >> The performance test results: >> Test compresses and decompresses qemu qcow2 image with just >> installed rhel-7.6 guest. >> Image cluster size: 64K. Image on disk size: 2.2G >> >> The test was conducted with brd disk to reduce the influence >> of disk subsystem to the test results. >> The results is given in seconds. >> >> compress cmd: >> time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] >> src.img [zlib|zstd]_compressed.img >> decompress cmd >> time ./qemu-img convert -O qcow2 >> [zlib|zstd]_compressed.img uncompressed.img >> >> compression decompression >> zlib zstd zlib zstd >> ------------------------------------------------------------ >> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >> user 65.0 15.8 5.3 2.5 >> sys 3.3 0.2 2.0 2.0 >> >> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >> compressed image size in both cases: 1.4G >> >> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >> QAPI part: >> Acked-by: Markus Armbruster <armbru@redhat.com> >> --- >> docs/interop/qcow2.txt | 1 + >> configure | 2 +- >> qapi/block-core.json | 3 +- >> block/qcow2-threads.c | 169 +++++++++++++++++++++++++++++++++++++++++ >> block/qcow2.c | 7 ++ >> slirp | 2 +- >> 6 files changed, 181 insertions(+), 3 deletions(-) > [...] > >> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >> index 7dbaf53489..a0b12e1b15 100644 >> --- a/block/qcow2-threads.c >> +++ b/block/qcow2-threads.c > [...] > >> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >> + const void *src, size_t src_size) >> +{ > [...] > >> + /* >> + * The compressed stream from the input buffer may consist of more >> + * than one zstd frame. > Can it? Potentially, it can, if another implemention of qcow2 saves a couple of frames for some reason. Denis > > Max > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 3/4] qcow2: add zstd cluster compression 2020-04-29 10:38 ` Denis Plotnikov @ 2020-04-29 12:24 ` Max Reitz 0 siblings, 0 replies; 21+ messages in thread From: Max Reitz @ 2020-04-29 12:24 UTC (permalink / raw) To: Denis Plotnikov, qemu-devel Cc: kwolf, vsementsov, berto, qemu-block, armbru, den [-- Attachment #1.1: Type: text/plain, Size: 2855 bytes --] On 29.04.20 12:38, Denis Plotnikov wrote: > > > On 29.04.2020 13:24, Max Reitz wrote: >> On 28.04.20 22:00, Denis Plotnikov wrote: >>> zstd significantly reduces cluster compression time. >>> It provides better compression performance maintaining >>> the same level of the compression ratio in comparison with >>> zlib, which, at the moment, is the only compression >>> method available. >>> >>> The performance test results: >>> Test compresses and decompresses qemu qcow2 image with just >>> installed rhel-7.6 guest. >>> Image cluster size: 64K. Image on disk size: 2.2G >>> >>> The test was conducted with brd disk to reduce the influence >>> of disk subsystem to the test results. >>> The results is given in seconds. >>> >>> compress cmd: >>> time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] >>> src.img [zlib|zstd]_compressed.img >>> decompress cmd >>> time ./qemu-img convert -O qcow2 >>> [zlib|zstd]_compressed.img uncompressed.img >>> >>> compression decompression >>> zlib zstd zlib zstd >>> ------------------------------------------------------------ >>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >>> user 65.0 15.8 5.3 2.5 >>> sys 3.3 0.2 2.0 2.0 >>> >>> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >>> compressed image size in both cases: 1.4G >>> >>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>> QAPI part: >>> Acked-by: Markus Armbruster <armbru@redhat.com> >>> --- >>> docs/interop/qcow2.txt | 1 + >>> configure | 2 +- >>> qapi/block-core.json | 3 +- >>> block/qcow2-threads.c | 169 +++++++++++++++++++++++++++++++++++++++++ >>> block/qcow2.c | 7 ++ >>> slirp | 2 +- >>> 6 files changed, 181 insertions(+), 3 deletions(-) >> [...] >> >>> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >>> index 7dbaf53489..a0b12e1b15 100644 >>> --- a/block/qcow2-threads.c >>> +++ b/block/qcow2-threads.c >> [...] >> >>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >>> + const void *src, size_t src_size) >>> +{ >> [...] >> >>> + /* >>> + * The compressed stream from the input buffer may consist of more >>> + * than one zstd frame. >> Can it? > > Potentially, it can, if another implemention of qcow2 saves a couple of > frames for some reason. Well, it can’t do that if qemu cannot decode it. Maybe there should be a note in the specification on the precise format to expect. If we decide that it might make sense for someone to encode a cluster with multiple frames, then OK. Max [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v22 4/4] iotests: 287: add qcow2 compression type test 2020-04-28 20:00 [PATCH v22 0/4] implement zstd cluster compression method Denis Plotnikov ` (2 preceding siblings ...) 2020-04-28 20:00 ` [PATCH v22 3/4] qcow2: add zstd cluster compression Denis Plotnikov @ 2020-04-28 20:00 ` Denis Plotnikov 2020-04-28 21:08 ` Eric Blake 2020-04-29 10:26 ` Max Reitz 3 siblings, 2 replies; 21+ messages in thread From: Denis Plotnikov @ 2020-04-28 20:00 UTC (permalink / raw) To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den The test checks fulfilling qcow2 requirements for the compression type feature and zstd compression type operability. Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> --- tests/qemu-iotests/287 | 152 +++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/287.out | 67 ++++++++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 220 insertions(+) create mode 100755 tests/qemu-iotests/287 create mode 100644 tests/qemu-iotests/287.out diff --git a/tests/qemu-iotests/287 b/tests/qemu-iotests/287 new file mode 100755 index 0000000000..21fe1f19f5 --- /dev/null +++ b/tests/qemu-iotests/287 @@ -0,0 +1,152 @@ +#!/usr/bin/env bash +# +# Test case for an image using zstd compression +# +# Copyright (c) 2020 Virtuozzo International GmbH +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +# creator +owner=dplotnikov@virtuozzo.com + +seq="$(basename $0)" +echo "QA output created by $seq" + +status=1 # failure is the default! + +# standard environment +. ./common.rc +. ./common.filter + +# This tests qocw2-specific low-level functionality +_supported_fmt qcow2 +_supported_proto file +_supported_os Linux +_unsupported_imgopts 'compat=0.10' data_file + +COMPR_IMG="$TEST_IMG.compressed" +RAND_FILE="$TEST_DIR/rand_data" + +_cleanup() +{ + _rm_test_img + rm -f "$COMPR_IMG" + rm -f "$RAND_FILE" +} +trap "_cleanup; exit \$status" 0 1 2 3 15 + +# for all the cases +CLUSTER_SIZE=65536 + +# Check if we can run this test. +if IMGOPTS='compression_type=zstd' _make_test_img 64M | + grep "Invalid parameter 'zstd'"; then + _notrun "ZSTD is disabled" +fi + +echo +echo "=== Testing compression type incompatible bit setting for zlib ===" +echo +_make_test_img -o compression_type=zlib 64M +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features + +echo +echo "=== Testing compression type incompatible bit setting for zstd ===" +echo +_make_test_img -o compression_type=zstd 64M +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features + +echo +echo "=== Testing zlib with incompatible bit set ===" +echo +_make_test_img -o compression_type=zlib 64M +$PYTHON qcow2.py "$TEST_IMG" set-feature-bit incompatible 3 +# to make sure the bit was actually set +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features + +if $QEMU_IMG info "$TEST_IMG" >/dev/null 2>&1 ; then + echo "Error: The image opened successfully. The image must not be opened." +fi + +echo +echo "=== Testing zstd with incompatible bit unset ===" +echo +_make_test_img -o compression_type=zstd 64M +$PYTHON qcow2.py "$TEST_IMG" set-header incompatible_features 0 +# to make sure the bit was actually unset +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features + +if $QEMU_IMG info "$TEST_IMG" >/dev/null 2>&1 ; then + echo "Error: The image opened successfully. The image must not be opened." +fi + +echo +echo "=== Testing compression type values ===" +echo +# zlib=0 +_make_test_img -o compression_type=zlib 64M +peek_file_be "$TEST_IMG" 104 1 +echo + +# zstd=1 +_make_test_img -o compression_type=zstd 64M +peek_file_be "$TEST_IMG" 104 1 +echo + +echo +echo "=== Testing simple reading and writing with zstd ===" +echo +_make_test_img -o compression_type=zstd 64M +$QEMU_IO -c "write -c -P 0xAC 64K 64K " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "read -P 0xAC 64K 64K " "$TEST_IMG" | _filter_qemu_io +# read on the cluster boundaries +$QEMU_IO -c "read -v 131070 8 " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "read -v 65534 8" "$TEST_IMG" | _filter_qemu_io + +echo +echo "=== Testing adjacent clusters reading and writing with zstd ===" +echo +_make_test_img -o compression_type=zstd 64M +$QEMU_IO -c "write -c -P 0xAB 0 64K " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "write -c -P 0xAC 64K 64K " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "write -c -P 0xAD 128K 64K " "$TEST_IMG" | _filter_qemu_io + +$QEMU_IO -c "read -P 0xAB 0 64k " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "read -P 0xAC 64K 64k " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "read -P 0xAD 128K 64k " "$TEST_IMG" | _filter_qemu_io + +echo +echo "=== Testing incompressible cluster processing with zstd ===" +echo +# create a 2M image and fill it with 1M likely incompressible data +# and 1M compressible data +dd if=/dev/urandom of="$RAND_FILE" bs=1M count=1 seek=1 +QEMU_IO_OPTIONS="$QEMU_IO_OPTIONS_NO_FMT" \ +$QEMU_IO -f raw -c "write -P 0xFA 0 1M" "$RAND_FILE" | _filter_qemu_io + +$QEMU_IMG convert -f raw -O $IMGFMT -c \ +-o "$(_optstr_add "$IMGOPTS" "compression_type=zlib")" "$RAND_FILE" \ +"$TEST_IMG" | _filter_qemu_io + +$QEMU_IMG convert -O $IMGFMT -c \ +-o "$(_optstr_add "$IMGOPTS" "compression_type=zstd")" "$TEST_IMG" \ +"$COMPR_IMG" | _filter_qemu_io + +$QEMU_IMG compare "$TEST_IMG" "$COMPR_IMG" + +# success, all done +echo "*** done" +rm -f $seq.full +status=0 diff --git a/tests/qemu-iotests/287.out b/tests/qemu-iotests/287.out new file mode 100644 index 0000000000..6b9dfb4af0 --- /dev/null +++ b/tests/qemu-iotests/287.out @@ -0,0 +1,67 @@ +QA output created by 287 + +=== Testing compression type incompatible bit setting for zlib === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +incompatible_features [] + +=== Testing compression type incompatible bit setting for zstd === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +incompatible_features [3] + +=== Testing zlib with incompatible bit set === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +incompatible_features [3] + +=== Testing zstd with incompatible bit unset === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +incompatible_features [] + +=== Testing compression type values === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 + 0 +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 + 1 + +=== Testing simple reading and writing with zstd === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +wrote 65536/65536 bytes at offset 65536 +64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +read 65536/65536 bytes at offset 65536 +64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +0001fffe: ac ac 00 00 00 00 00 00 ........ +read 8/8 bytes at offset 131070 +8 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +0000fffe: 00 00 ac ac ac ac ac ac ........ +read 8/8 bytes at offset 65534 +8 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) + +=== Testing adjacent clusters reading and writing with zstd === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +wrote 65536/65536 bytes at offset 0 +64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 65536/65536 bytes at offset 65536 +64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 65536/65536 bytes at offset 131072 +64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +read 65536/65536 bytes at offset 0 +64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +read 65536/65536 bytes at offset 65536 +64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +read 65536/65536 bytes at offset 131072 +64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) + +=== Testing incompressible cluster processing with zstd === + +1+0 records in +1+0 records out +wrote 1048576/1048576 bytes at offset 0 +1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +Images are identical. +*** done diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group index 435dccd5af..3bbe02c88d 100644 --- a/tests/qemu-iotests/group +++ b/tests/qemu-iotests/group @@ -294,6 +294,7 @@ 283 auto quick 284 rw 286 rw quick +287 auto quick 288 quick 289 rw quick 290 rw auto quick -- 2.17.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v22 4/4] iotests: 287: add qcow2 compression type test 2020-04-28 20:00 ` [PATCH v22 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov @ 2020-04-28 21:08 ` Eric Blake 2020-04-29 10:26 ` Max Reitz 1 sibling, 0 replies; 21+ messages in thread From: Eric Blake @ 2020-04-28 21:08 UTC (permalink / raw) To: Denis Plotnikov, qemu-devel Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den On 4/28/20 3:00 PM, Denis Plotnikov wrote: > The test checks fulfilling qcow2 requirements for the compression > type feature and zstd compression type operability. > > Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> > Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> > Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> > --- Reviewed-by: Eric Blake <eblake@redhat.com> -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 4/4] iotests: 287: add qcow2 compression type test 2020-04-28 20:00 ` [PATCH v22 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov 2020-04-28 21:08 ` Eric Blake @ 2020-04-29 10:26 ` Max Reitz 2020-04-29 10:40 ` Denis Plotnikov 1 sibling, 1 reply; 21+ messages in thread From: Max Reitz @ 2020-04-29 10:26 UTC (permalink / raw) To: Denis Plotnikov, qemu-devel Cc: kwolf, vsementsov, berto, qemu-block, armbru, den [-- Attachment #1.1: Type: text/plain, Size: 2516 bytes --] On 28.04.20 22:00, Denis Plotnikov wrote: > The test checks fulfilling qcow2 requirements for the compression > type feature and zstd compression type operability. > > Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> > Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> > Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> > --- > tests/qemu-iotests/287 | 152 +++++++++++++++++++++++++++++++++++++ > tests/qemu-iotests/287.out | 67 ++++++++++++++++ > tests/qemu-iotests/group | 1 + > 3 files changed, 220 insertions(+) > create mode 100755 tests/qemu-iotests/287 > create mode 100644 tests/qemu-iotests/287.out > > diff --git a/tests/qemu-iotests/287 b/tests/qemu-iotests/287 > new file mode 100755 > index 0000000000..21fe1f19f5 > --- /dev/null > +++ b/tests/qemu-iotests/287 > @@ -0,0 +1,152 @@ > +#!/usr/bin/env bash > +# > +# Test case for an image using zstd compression > +# > +# Copyright (c) 2020 Virtuozzo International GmbH > +# > +# This program is free software; you can redistribute it and/or modify > +# it under the terms of the GNU General Public License as published by > +# the Free Software Foundation; either version 2 of the License, or > +# (at your option) any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program. If not, see <http://www.gnu.org/licenses/>. > +# > + > +# creator > +owner=dplotnikov@virtuozzo.com > + > +seq="$(basename $0)" > +echo "QA output created by $seq" > + > +status=1 # failure is the default! > + > +# standard environment > +. ./common.rc > +. ./common.filter > + > +# This tests qocw2-specific low-level functionality > +_supported_fmt qcow2 > +_supported_proto file > +_supported_os Linux > +_unsupported_imgopts 'compat=0.10' data_file > + > +COMPR_IMG="$TEST_IMG.compressed" > +RAND_FILE="$TEST_DIR/rand_data" > + > +_cleanup() > +{ > + _rm_test_img _rm_test_img needs an argument (it basically replaces “rm”). What I thus meant was to keep the _cleanup_test_img here (that was completely correct), but... > + rm -f "$COMPR_IMG" ...to use “_rm_test_img "$COMPR_IMG"” here instead of rm. Max [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v22 4/4] iotests: 287: add qcow2 compression type test 2020-04-29 10:26 ` Max Reitz @ 2020-04-29 10:40 ` Denis Plotnikov 0 siblings, 0 replies; 21+ messages in thread From: Denis Plotnikov @ 2020-04-29 10:40 UTC (permalink / raw) To: Max Reitz, qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, den On 29.04.2020 13:26, Max Reitz wrote: > On 28.04.20 22:00, Denis Plotnikov wrote: >> The test checks fulfilling qcow2 requirements for the compression >> type feature and zstd compression type operability. >> >> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> >> Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> >> --- >> tests/qemu-iotests/287 | 152 +++++++++++++++++++++++++++++++++++++ >> tests/qemu-iotests/287.out | 67 ++++++++++++++++ >> tests/qemu-iotests/group | 1 + >> 3 files changed, 220 insertions(+) >> create mode 100755 tests/qemu-iotests/287 >> create mode 100644 tests/qemu-iotests/287.out >> >> diff --git a/tests/qemu-iotests/287 b/tests/qemu-iotests/287 >> new file mode 100755 >> index 0000000000..21fe1f19f5 >> --- /dev/null >> +++ b/tests/qemu-iotests/287 >> @@ -0,0 +1,152 @@ >> +#!/usr/bin/env bash >> +# >> +# Test case for an image using zstd compression >> +# >> +# Copyright (c) 2020 Virtuozzo International GmbH >> +# >> +# This program is free software; you can redistribute it and/or modify >> +# it under the terms of the GNU General Public License as published by >> +# the Free Software Foundation; either version 2 of the License, or >> +# (at your option) any later version. >> +# >> +# This program is distributed in the hope that it will be useful, >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> +# GNU General Public License for more details. >> +# >> +# You should have received a copy of the GNU General Public License >> +# along with this program. If not, see <http://www.gnu.org/licenses/>. >> +# >> + >> +# creator >> +owner=dplotnikov@virtuozzo.com >> + >> +seq="$(basename $0)" >> +echo "QA output created by $seq" >> + >> +status=1 # failure is the default! >> + >> +# standard environment >> +. ./common.rc >> +. ./common.filter >> + >> +# This tests qocw2-specific low-level functionality >> +_supported_fmt qcow2 >> +_supported_proto file >> +_supported_os Linux >> +_unsupported_imgopts 'compat=0.10' data_file >> + >> +COMPR_IMG="$TEST_IMG.compressed" >> +RAND_FILE="$TEST_DIR/rand_data" >> + >> +_cleanup() >> +{ >> + _rm_test_img > _rm_test_img needs an argument (it basically replaces “rm”). What I > thus meant was to keep the _cleanup_test_img here (that was completely > correct), but... > >> + rm -f "$COMPR_IMG" > ...to use “_rm_test_img "$COMPR_IMG"” here instead of rm. > > Max ok, I got it. Denis ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2020-05-04 7:54 UTC | newest] Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-04-28 20:00 [PATCH v22 0/4] implement zstd cluster compression method Denis Plotnikov 2020-04-28 20:00 ` [PATCH v22 1/4] qcow2: introduce compression type feature Denis Plotnikov 2020-04-28 20:00 ` [PATCH v22 2/4] qcow2: rework the cluster compression routine Denis Plotnikov 2020-04-28 20:00 ` [PATCH v22 3/4] qcow2: add zstd cluster compression Denis Plotnikov 2020-04-28 21:05 ` Eric Blake 2020-04-29 10:24 ` Max Reitz 2020-04-29 10:37 ` Vladimir Sementsov-Ogievskiy 2020-04-29 12:17 ` Max Reitz 2020-04-29 13:02 ` Vladimir Sementsov-Ogievskiy 2020-04-29 13:49 ` Eric Blake 2020-04-30 8:26 ` Max Reitz 2020-04-30 9:48 ` Denis Plotnikov 2020-04-30 11:47 ` Max Reitz 2020-04-30 13:56 ` Denis Plotnikov 2020-05-04 7:53 ` Max Reitz 2020-04-29 10:38 ` Denis Plotnikov 2020-04-29 12:24 ` Max Reitz 2020-04-28 20:00 ` [PATCH v22 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov 2020-04-28 21:08 ` Eric Blake 2020-04-29 10:26 ` Max Reitz 2020-04-29 10:40 ` Denis Plotnikov
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.