* [U-Boot] Is the Numonyx's M29W128 fully supported in U-Boot?
@ 2009-12-11 14:03 txema lopez
2009-12-11 15:43 ` txema lopez
2010-10-28 10:18 ` Avi Elbaz
0 siblings, 2 replies; 6+ messages in thread
From: txema lopez @ 2009-12-11 14:03 UTC (permalink / raw)
To: u-boot
Hi all,
We have a MPC5200B custom board and we are evaluating the Numonyx
M29W128 Flash as a second source for the Spansion's S29GL128.
I've checked the top of the tree version of the U-Boot (u-boot.git) CFI
driver and the Numonyx Flash is not detected. This is the U-Boot debug
output:
FLASH: flash detect cfi
fwc addr fe000000 cmd f0 f0 8bit x 8 bit
fwc addr fe000055 cmd 98 98 8bit x 8 bit
is= cmd 51(Q) addr fe000010 is= 0 51
fwc addr fe000000 cmd f0 f0f0 16bit x 8 bit
fwc addr fe0000aa cmd 98 9898 16bit x 8 bit
is= cmd 51(Q) addr fe000020 is= 5100 5151
fwc addr fe000000 cmd f0 00f0 16bit x 16 bit
fwc addr fe0000aa cmd 98 0098 16bit x 16 bit
is= cmd 51(Q) addr fe000020 is= 6d69 0051
fwc addr fe000000 cmd f0 f0f0f0f0 32bit x 8 bit
fwc addr fe000154 cmd 98 98989898 32bit x 8 bit
is= cmd 51(Q) addr fe000040 is= 4e6f7620 51515151
fwc addr fe000000 cmd f0 00f000f0 32bit x 16 bit
fwc addr fe000154 cmd 98 00980098 32bit x 16 bit
is= cmd 51(Q) addr fe000040 is= 4e6f7620 00510051
fwc addr fe000000 cmd f0 000000f0 32bit x 32 bit
fwc addr fe000154 cmd 98 00000098 32bit x 32 bit
is= cmd 51(Q) addr fe000040 is= 4e6f7620 00000051
fwrite addr fe000000 cmd f0 f0f0f0f0f0f0f0f0 64 bit x 8 bit
fwrite addr fe0002a8 cmd 98 9898989898989898 64 bit x 8 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 5151515151515151
fwrite addr fe000000 cmd f0 00f000f000f000f0 64 bit x 16 bit
fwrite addr fe0002a8 cmd 98 0098009800980098 64 bit x 16 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 0051005100510051
fwrite addr fe000000 cmd f0 000000f0000000f0 64 bit x 32 bit
fwrite addr fe0002a8 cmd 98 0000009800000098 64 bit x 32 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 0000005100000051
fwrite addr fe000000 cmd f0 00000000000000f0 64 bit x 64 bit
fwrite addr fe0002a8 cmd 98 0000000000000098 64 bit x 64 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 0000000000000051
not found
## Unknown FLASH on Bank 0 - Size = 0x00000000 = 0 MB
This is the debug output for the Spansion Flash that works fine.
FLASH: flash detect cfi
fwc addr fe000000 cmd f0 f0 8bit x 8 bit
fwc addr fe000055 cmd 98 98 8bit x 8 bit
is= cmd 51(Q) addr fe000010 is= 0 51
fwc addr fe000000 cmd f0 f0f0 16bit x 8 bit
fwc addr fe0000aa cmd 98 9898 16bit x 8 bit
is= cmd 51(Q) addr fe000020 is= 5151 5151
is= cmd 52(R) addr fe000022 is= 5252 5252
is= cmd 59(Y) addr fe000024 is= 5959 5959
ushort addr is at fe000050 info->portwidth = 2
addr[0] = 0x2
addr[1] = 0x2
addr[2] = 0x0
addr[3] = 0x0
retval = 0x2
device interface is 2
found port 2 chip 1 port 16 bits chip 8 bits
ushort addr is at fe000026 info->portwidth = 2
addr[0] = 0x2
addr[1] = 0x2
addr[2] = 0x0
addr[3] = 0x0
retval = 0x2
fe000020 : 51 51 52 52 59 59 02 02 00 00 40 40 00 00 00 00
QQRRYY....@@....
fe000030 : 00 00 00 00 00 00 27 27 36 36 00 00 00 00 06
06 ......''66......
fe000040 : 06 06 09 09 13 13 03 03 05 05 03 03 02 02 18
18 ................
fe000050 : 02 02 00 00 06 06 00 00 01 01 7f 7f 00 00 00
00 ................
fe000060 : 02 02 00 00 00 00 00 00 00 00 00 00 00 00 00
00 ................
fe000070 : 00 00 00 00 00 00 00 00 00 00 ff ff ff ff ff
ff ................
fe000080 : 50 50 52 52 49 49 31 31 33 33 14 14 02 02 01 01
PPRRII1133......
fe000090 : 00 00 08 08 00 00 00 00 02 02 b5 b5 c5 c5 04
04 ................
manufacturer is 2
size_ratio 1 port 16 bits chip 8 bits
found 1 erase regions
long addr is at fe00005a info->portwidth = 2
addr[0] = 0x7f
addr[1] = 0x7f
addr[2] = 0x0
addr[3] = 0x0
addr[4] = 0x0
addr[5] = 0x0
addr[6] = 0x2
addr[7] = 0x2
erase_region_count = 128 erase_region_size = 131072
ushort addr is at fe000054 info->portwidth = 2
addr[0] = 0x6
addr[1] = 0x6
addr[2] = 0x0
addr[3] = 0x0
retval = 0x6
So the problem seems to be that the Numonyx Flash do not put the CFI
query information in the odd bytes as you can see here:
fwc addr fe000000 cmd f0 f0f0 16bit x 8 bit
fwc addr fe0000aa cmd 98 9898 16bit x 8 bit
is= cmd 51(Q) addr fe000020 is= 5100 5151
I've checked the U-Boot mainling list and I've found only something
about a M29W128 bug but in a coldfire architecture. So I think the
Numonyx Flash has been tested in some boards but I don't knwon if there
is full support in U-Boot for it. If not, is there a patch available or
in process? Any clue will be welcomed.
TIA,
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Is the Numonyx's M29W128 fully supported in U-Boot?
2009-12-11 14:03 [U-Boot] Is the Numonyx's M29W128 fully supported in U-Boot? txema lopez
@ 2009-12-11 15:43 ` txema lopez
2009-12-17 10:00 ` txema lopez
2010-10-28 10:18 ` Avi Elbaz
1 sibling, 1 reply; 6+ messages in thread
From: txema lopez @ 2009-12-11 15:43 UTC (permalink / raw)
To: u-boot
Hi all,
I'm sorry, I sent to the list the debug messages of a older U-Boot
version. Here are the debug messages of the current U-Boot version.
FLASH: flash detect cfi
fwc addr fe000000 cmd f0 f0 8bit x 8 bit
fwc addr fe000000 cmd ff ff 8bit x 8 bit
fwc addr fe000055 cmd 98 98 8bit x 8 bit
is= cmd 51(Q) addr fe000010 is= 0 51
fwc addr fe000555 cmd 98 98 8bit x 8 bit
is= cmd 51(Q) addr fe000010 is= 0 51
fwc addr fe000000 cmd f0 f0f0 16bit x 8 bit
fwc addr fe000000 cmd ff ffff 16bit x 8 bit
fwc addr fe0000aa cmd 98 9898 16bit x 8 bit
is= cmd 51(Q) addr fe000020 is= 5100 5151
fwc addr fe000aaa cmd 98 9898 16bit x 8 bit
is= cmd 51(Q) addr fe000020 is= 5100 5151
fwc addr fe000000 cmd f0 00f0 16bit x 16 bit
fwc addr fe000000 cmd ff 00ff 16bit x 16 bit
fwc addr fe0000aa cmd 98 0098 16bit x 16 bit
is= cmd 51(Q) addr fe000020 is= 6d69 0051
fwc addr fe000aaa cmd 98 0098 16bit x 16 bit
is= cmd 51(Q) addr fe000020 is= 6d69 0051
fwc addr fe000000 cmd f0 f0f0f0f0 32bit x 8 bit
fwc addr fe000000 cmd ff ffffffff 32bit x 8 bit
fwc addr fe000154 cmd 98 98989898 32bit x 8 bit
is= cmd 51(Q) addr fe000040 is= 4e6f7620 51515151
fwc addr fe001554 cmd 98 98989898 32bit x 8 bit
is= cmd 51(Q) addr fe000040 is= 4e6f7620 51515151
fwc addr fe000000 cmd f0 00f000f0 32bit x 16 bit
fwc addr fe000000 cmd ff 00ff00ff 32bit x 16 bit
fwc addr fe000154 cmd 98 00980098 32bit x 16 bit
is= cmd 51(Q) addr fe000040 is= 4e6f7620 00510051
fwc addr fe001554 cmd 98 00980098 32bit x 16 bit
is= cmd 51(Q) addr fe000040 is= 4e6f7620 00510051
fwc addr fe000000 cmd f0 000000f0 32bit x 32 bit
fwc addr fe000000 cmd ff 000000ff 32bit x 32 bit
fwc addr fe000154 cmd 98 00000098 32bit x 32 bit
is= cmd 51(Q) addr fe000040 is= 4e6f7620 00000051
fwc addr fe001554 cmd 98 00000098 32bit x 32 bit
is= cmd 51(Q) addr fe000040 is= 4e6f7620 00000051
fwrite addr fe000000 cmd f0 f0f0f0f0f0f0f0f0 64 bit x 8 bit
fwrite addr fe000000 cmd ff ffffffffffffffff 64 bit x 8 bit
fwrite addr fe0002a8 cmd 98 9898989898989898 64 bit x 8 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 5151515151515151
fwrite addr fe002aa8 cmd 98 9898989898989898 64 bit x 8 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 5151515151515151
fwrite addr fe000000 cmd f0 00f000f000f000f0 64 bit x 16 bit
fwrite addr fe000000 cmd ff 00ff00ff00ff00ff 64 bit x 16 bit
fwrite addr fe0002a8 cmd 98 0098009800980098 64 bit x 16 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 0051005100510051
fwrite addr fe002aa8 cmd 98 0098009800980098 64 bit x 16 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 0051005100510051
fwrite addr fe000000 cmd f0 000000f0000000f0 64 bit x 32 bit
fwrite addr fe000000 cmd ff 000000ff000000ff 64 bit x 32 bit
fwrite addr fe0002a8 cmd 98 0000009800000098 64 bit x 32 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 0000005100000051
fwrite addr fe002aa8 cmd 98 0000009800000098 64 bit x 32 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 0000005100000051
fwrite addr fe000000 cmd f0 00000000000000f0 64 bit x 64 bit
fwrite addr fe000000 cmd ff 00000000000000ff 64 bit x 64 bit
fwrite addr fe0002a8 cmd 98 0000000000000098 64 bit x 64 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 0000000000000051
fwrite addr fe002aa8 cmd 98 0000000000000098 64 bit x 64 bit
is= cmd 51(Q) addr fe000080 is= 0000000000000000 0000000000000051
not found
El vie, 11-12-2009 a las 15:03 +0100, txema lopez escribi?:
> Hi all,
>
> We have a MPC5200B custom board and we are evaluating the Numonyx
> M29W128 Flash as a second source for the Spansion's S29GL128.
> I've checked the top of the tree version of the U-Boot (u-boot.git) CFI
> driver and the Numonyx Flash is not detected. This is the U-Boot debug
> output:
>
> FLASH: flash detect cfi
> fwc addr fe000000 cmd f0 f0 8bit x 8 bit
> fwc addr fe000055 cmd 98 98 8bit x 8 bit
> is= cmd 51(Q) addr fe000010 is= 0 51
> fwc addr fe000000 cmd f0 f0f0 16bit x 8 bit
> fwc addr fe0000aa cmd 98 9898 16bit x 8 bit
> is= cmd 51(Q) addr fe000020 is= 5100 5151
> fwc addr fe000000 cmd f0 00f0 16bit x 16 bit
> fwc addr fe0000aa cmd 98 0098 16bit x 16 bit
> is= cmd 51(Q) addr fe000020 is= 6d69 0051
> fwc addr fe000000 cmd f0 f0f0f0f0 32bit x 8 bit
> fwc addr fe000154 cmd 98 98989898 32bit x 8 bit
> is= cmd 51(Q) addr fe000040 is= 4e6f7620 51515151
> fwc addr fe000000 cmd f0 00f000f0 32bit x 16 bit
> fwc addr fe000154 cmd 98 00980098 32bit x 16 bit
> is= cmd 51(Q) addr fe000040 is= 4e6f7620 00510051
> fwc addr fe000000 cmd f0 000000f0 32bit x 32 bit
> fwc addr fe000154 cmd 98 00000098 32bit x 32 bit
> is= cmd 51(Q) addr fe000040 is= 4e6f7620 00000051
> fwrite addr fe000000 cmd f0 f0f0f0f0f0f0f0f0 64 bit x 8 bit
> fwrite addr fe0002a8 cmd 98 9898989898989898 64 bit x 8 bit
> is= cmd 51(Q) addr fe000080 is= 0000000000000000 5151515151515151
> fwrite addr fe000000 cmd f0 00f000f000f000f0 64 bit x 16 bit
> fwrite addr fe0002a8 cmd 98 0098009800980098 64 bit x 16 bit
> is= cmd 51(Q) addr fe000080 is= 0000000000000000 0051005100510051
> fwrite addr fe000000 cmd f0 000000f0000000f0 64 bit x 32 bit
> fwrite addr fe0002a8 cmd 98 0000009800000098 64 bit x 32 bit
> is= cmd 51(Q) addr fe000080 is= 0000000000000000 0000005100000051
> fwrite addr fe000000 cmd f0 00000000000000f0 64 bit x 64 bit
> fwrite addr fe0002a8 cmd 98 0000000000000098 64 bit x 64 bit
> is= cmd 51(Q) addr fe000080 is= 0000000000000000 0000000000000051
> not found
> ## Unknown FLASH on Bank 0 - Size = 0x00000000 = 0 MB
>
>
> This is the debug output for the Spansion Flash that works fine.
>
> FLASH: flash detect cfi
> fwc addr fe000000 cmd f0 f0 8bit x 8 bit
> fwc addr fe000055 cmd 98 98 8bit x 8 bit
> is= cmd 51(Q) addr fe000010 is= 0 51
> fwc addr fe000000 cmd f0 f0f0 16bit x 8 bit
> fwc addr fe0000aa cmd 98 9898 16bit x 8 bit
> is= cmd 51(Q) addr fe000020 is= 5151 5151
> is= cmd 52(R) addr fe000022 is= 5252 5252
> is= cmd 59(Y) addr fe000024 is= 5959 5959
> ushort addr is at fe000050 info->portwidth = 2
> addr[0] = 0x2
> addr[1] = 0x2
> addr[2] = 0x0
> addr[3] = 0x0
> retval = 0x2
> device interface is 2
> found port 2 chip 1 port 16 bits chip 8 bits
> ushort addr is at fe000026 info->portwidth = 2
> addr[0] = 0x2
> addr[1] = 0x2
> addr[2] = 0x0
> addr[3] = 0x0
> retval = 0x2
> fe000020 : 51 51 52 52 59 59 02 02 00 00 40 40 00 00 00 00
> QQRRYY....@@....
> fe000030 : 00 00 00 00 00 00 27 27 36 36 00 00 00 00 06
> 06 ......''66......
> fe000040 : 06 06 09 09 13 13 03 03 05 05 03 03 02 02 18
> 18 ................
> fe000050 : 02 02 00 00 06 06 00 00 01 01 7f 7f 00 00 00
> 00 ................
> fe000060 : 02 02 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 ................
> fe000070 : 00 00 00 00 00 00 00 00 00 00 ff ff ff ff ff
> ff ................
> fe000080 : 50 50 52 52 49 49 31 31 33 33 14 14 02 02 01 01
> PPRRII1133......
> fe000090 : 00 00 08 08 00 00 00 00 02 02 b5 b5 c5 c5 04
> 04 ................
> manufacturer is 2
> size_ratio 1 port 16 bits chip 8 bits
> found 1 erase regions
> long addr is at fe00005a info->portwidth = 2
> addr[0] = 0x7f
> addr[1] = 0x7f
> addr[2] = 0x0
> addr[3] = 0x0
> addr[4] = 0x0
> addr[5] = 0x0
> addr[6] = 0x2
> addr[7] = 0x2
> erase_region_count = 128 erase_region_size = 131072
> ushort addr is at fe000054 info->portwidth = 2
> addr[0] = 0x6
> addr[1] = 0x6
> addr[2] = 0x0
> addr[3] = 0x0
> retval = 0x6
>
>
> So the problem seems to be that the Numonyx Flash do not put the CFI
> query information in the odd bytes as you can see here:
> fwc addr fe000000 cmd f0 f0f0 16bit x 8 bit
> fwc addr fe0000aa cmd 98 9898 16bit x 8 bit
> is= cmd 51(Q) addr fe000020 is= 5100 5151
>
>
> I've checked the U-Boot mainling list and I've found only something
> about a M29W128 bug but in a coldfire architecture. So I think the
> Numonyx Flash has been tested in some boards but I don't knwon if there
> is full support in U-Boot for it. If not, is there a patch available or
> in process? Any clue will be welcomed.
>
> TIA,
>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Is the Numonyx's M29W128 fully supported in U-Boot?
2009-12-11 15:43 ` txema lopez
@ 2009-12-17 10:00 ` txema lopez
0 siblings, 0 replies; 6+ messages in thread
From: txema lopez @ 2009-12-17 10:00 UTC (permalink / raw)
To: u-boot
Hi all,
This is a patch to fix the NUMONYX's M29W128GL cfi detection bug in my
Lite5200B based custom board. I thing I's only a starting point for a
more formal patch valid for any kind of architecture (big and little
endian) and flash layout (I've only check it in a 16x portwitdh 8x
chipwitch).
I'm not a CFI flash expert and any feedback about this issue will be
welcomed.
TIA,
--- cfi_flash_old.c 2009-12-09 18:25:44.000000000 +0100
+++ cfi_flash_new.c 2009-12-17 10:28:00.000000000 +0100
@@ -214,6 +214,10 @@ static void flash_make_cmd(flash_info_t
val = *((uchar*)&cmd + sizeof(u32) - cword_offset - 1);
#endif
cp[cp_offset] = (cword_offset >= sizeof(u32)) ? 0x00 : val;
+ if(info->cfi_fixup & CFI_NUMONYX_FIXUP) {
+ if(cp_offset & 1)
+ cp[cp_offset] = 0x00;
+ }
}
}
@@ -266,7 +270,10 @@ static inline uchar flash_read_uchar (fl
#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
retval = flash_read8(cp);
#else
- retval = flash_read8(cp + info->portwidth - 1);
+ if(info->cfi_fixup & CFI_NUMONYX_FIXUP)
+ retval = flash_read8(cp);
+ else
+ retval = flash_read8(cp + info->portwidth - 1);
#endif
flash_unmap (info, 0, offset, cp);
return retval;
@@ -1420,7 +1427,12 @@ static void cmdset_amd_read_jedec_ids(fl
{
ushort bankId = 0;
uchar manuId;
+ uchar portwidth;
+ portwidth = info->portwidth;
+ if(info->chipwidth == FLASH_CFI_8BIT)
+ info->portwidth = FLASH_CFI_8BIT;
+
flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
flash_unlock_seq(info, 0);
flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
@@ -1438,14 +1450,14 @@ static void cmdset_amd_read_jedec_ids(fl
switch (info->chipwidth){
case FLASH_CFI_8BIT:
info->device_id = flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID);
+ FLASH_OFFSET_DEVICE_ID * portwidth);
if (info->device_id == 0x7E) {
/* AMD 3-byte (expanded) device ids */
info->device_id2 = flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID2);
+ FLASH_OFFSET_DEVICE_ID2 * portwidth);
info->device_id2 <<= 8;
info->device_id2 |= flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID3);
+ FLASH_OFFSET_DEVICE_ID3 * portwidth);
}
break;
case FLASH_CFI_16BIT:
@@ -1456,6 +1468,9 @@ static void cmdset_amd_read_jedec_ids(fl
break;
}
flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+
+ info->portwidth = portwidth;
+
}
static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry)
@@ -1582,6 +1597,10 @@ void __flash_cmd_reset(flash_info_t *inf
* that AMD flash roms ignore the Intel command.
*/
flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+
+ if(info->cfi_fixup & CFI_NUMONYX_FIXUP)
+ return;
+
flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
}
void flash_cmd_reset(flash_info_t *info)
@@ -1646,6 +1665,12 @@ static int flash_detect_cfi (flash_info_
{
debug ("flash detect cfi\n");
+ info->cfi_fixup = 0;
+
+#ifdef CONFIG_FLASH_NUMONYX_FIXUP
+ info->cfi_fixup = CFI_NUMONYX_FIXUP;
+#endif
+
for (info->portwidth = CONFIG_SYS_FLASH_CFI_WIDTH;
info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) {
for (info->chipwidth = FLASH_CFI_BY8;
--- flash_old.h 2009-12-10 12:25:41.000000000 +0100
+++ flash_new.h 2009-12-17 10:26:55.000000000 +0100
@@ -55,6 +55,7 @@ typedef struct {
ulong addr_unlock1; /* unlock address 1 for AMD flash roms */
ulong addr_unlock2; /* unlock address 2 for AMD flash roms */
const char *name; /* human-readable name */
+ uchar cfi_fixup;
#endif
} flash_info_t;
@@ -87,6 +88,9 @@ typedef unsigned long flash_sect_t;
/* convert between bit value and numeric value */
#define CFI_FLASH_SHIFT_WIDTH 3
+
+#define CFI_NUMONYX_FIXUP 0x01
+
/* Prototypes */
extern unsigned long flash_init (void);
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Is the Numonyx's M29W128 fully supported in U-Boot?
2009-12-11 14:03 [U-Boot] Is the Numonyx's M29W128 fully supported in U-Boot? txema lopez
2009-12-11 15:43 ` txema lopez
@ 2010-10-28 10:18 ` Avi Elbaz
2010-10-28 12:23 ` Txema López
1 sibling, 1 reply; 6+ messages in thread
From: Avi Elbaz @ 2010-10-28 10:18 UTC (permalink / raw)
To: u-boot
txema lopez <tlopez <at> aotek.es> writes:
>
> Hi all,
>
> We have a MPC5200B custom board and we are evaluating the Numonyx
> M29W128 Flash as a second source for the Spansion's S29GL128.
> I've checked the top of the tree version of the U-Boot (u-boot.git) CFI
> driver and the Numonyx Flash is not detected. This is the U-Boot debug
> output:
>
Hi,
Did you manage to solve this problem eventually?
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Is the Numonyx's M29W128 fully supported in U-Boot?
2010-10-28 10:18 ` Avi Elbaz
@ 2010-10-28 12:23 ` Txema López
2010-10-28 13:27 ` Avi Elbaz
0 siblings, 1 reply; 6+ messages in thread
From: Txema López @ 2010-10-28 12:23 UTC (permalink / raw)
To: u-boot
> Did you manage to solve this problem eventually?
>
>
>
Yes, and I submitted a patch only valid for my board architecture and
flash layout.
See,
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/72598/focus=72602
Best Regards
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] Is the Numonyx's M29W128 fully supported in U-Boot?
2010-10-28 12:23 ` Txema López
@ 2010-10-28 13:27 ` Avi Elbaz
0 siblings, 0 replies; 6+ messages in thread
From: Avi Elbaz @ 2010-10-28 13:27 UTC (permalink / raw)
To: u-boot
Txema L?pez <tlopez <at> fagorautomation.es> writes:
Great !
Thanks a lot :)
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-10-28 13:27 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-12-11 14:03 [U-Boot] Is the Numonyx's M29W128 fully supported in U-Boot? txema lopez
2009-12-11 15:43 ` txema lopez
2009-12-17 10:00 ` txema lopez
2010-10-28 10:18 ` Avi Elbaz
2010-10-28 12:23 ` Txema López
2010-10-28 13:27 ` Avi Elbaz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.