From: Kevin Hilman <khilman@baylibre.com>
To: arm@kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Amlogic 64-bit DT updates for v4.12
Date: Wed, 29 Mar 2017 14:45:03 -0700 [thread overview]
Message-ID: <m28tnn69ls.fsf@baylibre.com> (raw)
Olof, Arnd,
Below are some 64-bit DT changes for Amlogic platforms for v4.12. Note
that this branch includes a merge of an immutable branch from the clk
tree (clk-meson) due to dependencies on new clocks added to the meson
clock driver and used in these DT updates.
Kevin
The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:
Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64
for you to fetch changes up to a1093238d6b148b46b7f3e0642681ec41baa1d0b:
Merge branch 'clk-meson' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into v4.12/dt64 (2017-03-28 10:47:49 -0700)
----------------------------------------------------------------
Amlogic 64-bit DT updates for v4.12
- pinctrl: new pins for audio
- clocks: more clocks exposed for GFX, audio
- new board: Khadas Vim (S905X)
- new board: HwaCom AmazeTV (S905X)
- ethernet phy: add GPIO resets
----------------------------------------------------------------
Carlo Caione (3):
dt-bindings: Add vendor prefix for Hwacom Systems Inc.
dt-bindings: amlogic: Add HwaCom board
ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV
Jerome Brunet (9):
clk: meson: fix SET_PARM macro
clk: meson: add missing const qualifiers on gate arrays
clk: meson8b: put dividers and muxes in tables
clk: gxbb: put dividers and muxes in tables
clk: meson: mpll: add rw operation
clk: meson: gxbb: mpll: use rw operation
clk: meson8b: add the mplls clocks 0, 1 and 2
clk: meson: mpll: correct N2 maximum value
dt-bindings: clk: gxbb: expose i2s output clock gates
Kevin Hilman (1):
Merge branch 'clk-meson' of git://git.kernel.org/.../clk/linux into v4.12/dt64
Martin Blumenstingl (14):
ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-p201: fix ethernet support
ARM64: dts: amlogic: add the ethernet TX delay configuration
ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
ARM64: dts: meson-gxl: improve support for the P212 reference design
ARM64: dts: amlogic: meson-gxl: add the missing PWM pins
devicetree: add vendor prefix for Khadas
dt-bindings: amlogic: add the Khadas VIM
ARM64: dts: meson-gxl: add support for the Khadas VIM board
Neil Armstrong (20):
ARM64: dts: meson-gx: Add Buttons to Q200 and P230 boards
ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names
ARM64: dts: meson-gxbb-odroidc2: Fix TFLASH VDD regulator GPIO line
ARM64: dts: meson-gx: Finally move common nodes to GX dtsi
ARM64: dts: meson-gx: empty line cleanup
ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes
ARM64: dts: meson-gxl: Add missing pinctrl pins groups
clk: meson-gxbb: Add MALI clock IDS
clk: meson-gxbb: Add MALI clocks
clk: meson: Add support for parameters for specific PLLs
clk: meson-gxbb: Add GP0 PLL init parameters
clk: meson-gxbb: Add GXL/GXM GP0 Variant
clk: meson-gxbb: Expose GP0 dt-bindings clock id
dt-bindings: clock: gxbb-clkc: Add GXL compatible variant
ARM64: dts: meson-gx: Add Mali nodes for GXBB and GXL
ARM64: dts: meson-gxbb: Add gpio-ranges properties
ARM64: dts: meson-gxl: Add gpio-ranges properties
ARM: dts: meson8: Add gpio-ranges properties
ARM: dts: meson8b: Add gpio-ranges properties
ARM64: dts: meson-gxbb: Add USB Hub GPIO hog
jbrunet (4):
ARM64: dts: meson-gxbb: add i2s output pins
ARM64: dts: meson-gxbb: add spdif output pins
ARM64: dts: meson-gxl: add i2s output pins
ARM64: dts: meson-gxl: add spdif output pins
Documentation/devicetree/bindings/arm/amlogic.txt | 3 +
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 3 +-
Documentation/devicetree/bindings/vendor-prefixes.txt | 2 +
arch/arm/boot/dts/meson8.dtsi | 2 +
arch/arm/boot/dts/meson8b.dtsi | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 40 +++++--
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 17 +++
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 75 ++++++++++++-
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 25 +++++
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 11 ++
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 6 --
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 21 +++-
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 26 +++++
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 26 +++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 160 ++++++++++++++++++++++------
arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi | 43 ++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 42 ++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 114 ++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 ++--
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 ++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 181 +++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 +
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 42 ++++++++
drivers/clk/meson/clk-mpll.c | 152 +++++++++++++++++++++++++-
drivers/clk/meson/clk-pll.c | 53 +++++++++-
drivers/clk/meson/clkc.h | 29 ++++-
drivers/clk/meson/gxbb.c | 505 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
drivers/clk/meson/gxbb.h | 23 ++--
drivers/clk/meson/meson8b.c | 127 +++++++++++++++++++++-
drivers/clk/meson/meson8b.h | 20 +++-
include/dt-bindings/clock/gxbb-clkc.h | 11 ++
35 files changed, 2011 insertions(+), 114 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: khilman@baylibre.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Amlogic 64-bit DT updates for v4.12
Date: Wed, 29 Mar 2017 14:45:03 -0700 [thread overview]
Message-ID: <m28tnn69ls.fsf@baylibre.com> (raw)
Olof, Arnd,
Below are some 64-bit DT changes for Amlogic platforms for v4.12. Note
that this branch includes a merge of an immutable branch from the clk
tree (clk-meson) due to dependencies on new clocks added to the meson
clock driver and used in these DT updates.
Kevin
The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:
Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64
for you to fetch changes up to a1093238d6b148b46b7f3e0642681ec41baa1d0b:
Merge branch 'clk-meson' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into v4.12/dt64 (2017-03-28 10:47:49 -0700)
----------------------------------------------------------------
Amlogic 64-bit DT updates for v4.12
- pinctrl: new pins for audio
- clocks: more clocks exposed for GFX, audio
- new board: Khadas Vim (S905X)
- new board: HwaCom AmazeTV (S905X)
- ethernet phy: add GPIO resets
----------------------------------------------------------------
Carlo Caione (3):
dt-bindings: Add vendor prefix for Hwacom Systems Inc.
dt-bindings: amlogic: Add HwaCom board
ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV
Jerome Brunet (9):
clk: meson: fix SET_PARM macro
clk: meson: add missing const qualifiers on gate arrays
clk: meson8b: put dividers and muxes in tables
clk: gxbb: put dividers and muxes in tables
clk: meson: mpll: add rw operation
clk: meson: gxbb: mpll: use rw operation
clk: meson8b: add the mplls clocks 0, 1 and 2
clk: meson: mpll: correct N2 maximum value
dt-bindings: clk: gxbb: expose i2s output clock gates
Kevin Hilman (1):
Merge branch 'clk-meson' of git://git.kernel.org/.../clk/linux into v4.12/dt64
Martin Blumenstingl (14):
ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-p201: fix ethernet support
ARM64: dts: amlogic: add the ethernet TX delay configuration
ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
ARM64: dts: meson-gxl: improve support for the P212 reference design
ARM64: dts: amlogic: meson-gxl: add the missing PWM pins
devicetree: add vendor prefix for Khadas
dt-bindings: amlogic: add the Khadas VIM
ARM64: dts: meson-gxl: add support for the Khadas VIM board
Neil Armstrong (20):
ARM64: dts: meson-gx: Add Buttons to Q200 and P230 boards
ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names
ARM64: dts: meson-gxbb-odroidc2: Fix TFLASH VDD regulator GPIO line
ARM64: dts: meson-gx: Finally move common nodes to GX dtsi
ARM64: dts: meson-gx: empty line cleanup
ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes
ARM64: dts: meson-gxl: Add missing pinctrl pins groups
clk: meson-gxbb: Add MALI clock IDS
clk: meson-gxbb: Add MALI clocks
clk: meson: Add support for parameters for specific PLLs
clk: meson-gxbb: Add GP0 PLL init parameters
clk: meson-gxbb: Add GXL/GXM GP0 Variant
clk: meson-gxbb: Expose GP0 dt-bindings clock id
dt-bindings: clock: gxbb-clkc: Add GXL compatible variant
ARM64: dts: meson-gx: Add Mali nodes for GXBB and GXL
ARM64: dts: meson-gxbb: Add gpio-ranges properties
ARM64: dts: meson-gxl: Add gpio-ranges properties
ARM: dts: meson8: Add gpio-ranges properties
ARM: dts: meson8b: Add gpio-ranges properties
ARM64: dts: meson-gxbb: Add USB Hub GPIO hog
jbrunet (4):
ARM64: dts: meson-gxbb: add i2s output pins
ARM64: dts: meson-gxbb: add spdif output pins
ARM64: dts: meson-gxl: add i2s output pins
ARM64: dts: meson-gxl: add spdif output pins
Documentation/devicetree/bindings/arm/amlogic.txt | 3 +
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 3 +-
Documentation/devicetree/bindings/vendor-prefixes.txt | 2 +
arch/arm/boot/dts/meson8.dtsi | 2 +
arch/arm/boot/dts/meson8b.dtsi | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 40 +++++--
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 17 +++
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 75 ++++++++++++-
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 25 +++++
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 11 ++
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 6 --
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 21 +++-
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 26 +++++
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 26 +++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 160 ++++++++++++++++++++++------
arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi | 43 ++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 42 ++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 114 ++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 ++--
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 ++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 181 +++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 +
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 42 ++++++++
drivers/clk/meson/clk-mpll.c | 152 +++++++++++++++++++++++++-
drivers/clk/meson/clk-pll.c | 53 +++++++++-
drivers/clk/meson/clkc.h | 29 ++++-
drivers/clk/meson/gxbb.c | 505 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
drivers/clk/meson/gxbb.h | 23 ++--
drivers/clk/meson/meson8b.c | 127 +++++++++++++++++++++-
drivers/clk/meson/meson8b.h | 20 +++-
include/dt-bindings/clock/gxbb-clkc.h | 11 ++
35 files changed, 2011 insertions(+), 114 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
WARNING: multiple messages have this Message-ID (diff)
From: khilman@baylibre.com (Kevin Hilman)
To: linus-amlogic@lists.infradead.org
Subject: [GIT PULL] Amlogic 64-bit DT updates for v4.12
Date: Wed, 29 Mar 2017 14:45:03 -0700 [thread overview]
Message-ID: <m28tnn69ls.fsf@baylibre.com> (raw)
Olof, Arnd,
Below are some 64-bit DT changes for Amlogic platforms for v4.12. Note
that this branch includes a merge of an immutable branch from the clk
tree (clk-meson) due to dependencies on new clocks added to the meson
clock driver and used in these DT updates.
Kevin
The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:
Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64
for you to fetch changes up to a1093238d6b148b46b7f3e0642681ec41baa1d0b:
Merge branch 'clk-meson' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into v4.12/dt64 (2017-03-28 10:47:49 -0700)
----------------------------------------------------------------
Amlogic 64-bit DT updates for v4.12
- pinctrl: new pins for audio
- clocks: more clocks exposed for GFX, audio
- new board: Khadas Vim (S905X)
- new board: HwaCom AmazeTV (S905X)
- ethernet phy: add GPIO resets
----------------------------------------------------------------
Carlo Caione (3):
dt-bindings: Add vendor prefix for Hwacom Systems Inc.
dt-bindings: amlogic: Add HwaCom board
ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV
Jerome Brunet (9):
clk: meson: fix SET_PARM macro
clk: meson: add missing const qualifiers on gate arrays
clk: meson8b: put dividers and muxes in tables
clk: gxbb: put dividers and muxes in tables
clk: meson: mpll: add rw operation
clk: meson: gxbb: mpll: use rw operation
clk: meson8b: add the mplls clocks 0, 1 and 2
clk: meson: mpll: correct N2 maximum value
dt-bindings: clk: gxbb: expose i2s output clock gates
Kevin Hilman (1):
Merge branch 'clk-meson' of git://git.kernel.org/.../clk/linux into v4.12/dt64
Martin Blumenstingl (14):
ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-p201: fix ethernet support
ARM64: dts: amlogic: add the ethernet TX delay configuration
ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
ARM64: dts: meson-gxl: improve support for the P212 reference design
ARM64: dts: amlogic: meson-gxl: add the missing PWM pins
devicetree: add vendor prefix for Khadas
dt-bindings: amlogic: add the Khadas VIM
ARM64: dts: meson-gxl: add support for the Khadas VIM board
Neil Armstrong (20):
ARM64: dts: meson-gx: Add Buttons to Q200 and P230 boards
ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names
ARM64: dts: meson-gxbb-odroidc2: Fix TFLASH VDD regulator GPIO line
ARM64: dts: meson-gx: Finally move common nodes to GX dtsi
ARM64: dts: meson-gx: empty line cleanup
ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes
ARM64: dts: meson-gxl: Add missing pinctrl pins groups
clk: meson-gxbb: Add MALI clock IDS
clk: meson-gxbb: Add MALI clocks
clk: meson: Add support for parameters for specific PLLs
clk: meson-gxbb: Add GP0 PLL init parameters
clk: meson-gxbb: Add GXL/GXM GP0 Variant
clk: meson-gxbb: Expose GP0 dt-bindings clock id
dt-bindings: clock: gxbb-clkc: Add GXL compatible variant
ARM64: dts: meson-gx: Add Mali nodes for GXBB and GXL
ARM64: dts: meson-gxbb: Add gpio-ranges properties
ARM64: dts: meson-gxl: Add gpio-ranges properties
ARM: dts: meson8: Add gpio-ranges properties
ARM: dts: meson8b: Add gpio-ranges properties
ARM64: dts: meson-gxbb: Add USB Hub GPIO hog
jbrunet (4):
ARM64: dts: meson-gxbb: add i2s output pins
ARM64: dts: meson-gxbb: add spdif output pins
ARM64: dts: meson-gxl: add i2s output pins
ARM64: dts: meson-gxl: add spdif output pins
Documentation/devicetree/bindings/arm/amlogic.txt | 3 +
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 3 +-
Documentation/devicetree/bindings/vendor-prefixes.txt | 2 +
arch/arm/boot/dts/meson8.dtsi | 2 +
arch/arm/boot/dts/meson8b.dtsi | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 40 +++++--
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 17 +++
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 75 ++++++++++++-
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 25 +++++
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 11 ++
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 6 --
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 21 +++-
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 26 +++++
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 26 +++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 160 ++++++++++++++++++++++------
arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi | 43 ++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 42 ++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 114 ++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 ++--
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 ++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 181 +++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 +
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 42 ++++++++
drivers/clk/meson/clk-mpll.c | 152 +++++++++++++++++++++++++-
drivers/clk/meson/clk-pll.c | 53 +++++++++-
drivers/clk/meson/clkc.h | 29 ++++-
drivers/clk/meson/gxbb.c | 505 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
drivers/clk/meson/gxbb.h | 23 ++--
drivers/clk/meson/meson8b.c | 127 +++++++++++++++++++++-
drivers/clk/meson/meson8b.h | 20 +++-
include/dt-bindings/clock/gxbb-clkc.h | 11 ++
35 files changed, 2011 insertions(+), 114 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
next reply other threads:[~2017-03-29 21:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-29 21:45 Kevin Hilman [this message]
2017-03-29 21:45 ` [GIT PULL] Amlogic 64-bit DT updates for v4.12 Kevin Hilman
2017-03-29 21:45 ` Kevin Hilman
2017-03-31 14:02 ` Arnd Bergmann
2017-03-31 14:02 ` Arnd Bergmann
2017-03-31 14:02 ` Arnd Bergmann
2017-03-31 16:01 ` Kevin Hilman
2017-03-31 16:01 ` Kevin Hilman
2017-03-31 16:01 ` Kevin Hilman
2017-03-31 16:11 ` Ben Dooks
2017-03-31 16:11 ` Ben Dooks
2017-03-31 16:11 ` Ben Dooks
2017-03-31 17:07 ` Michael Turquette
2017-03-31 17:07 ` Michael Turquette
2017-03-31 17:07 ` Michael Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m28tnn69ls.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=arm@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.