* [PATCH 00/13] IXP4xx spring cleaning
@ 2022-01-27 0:36 Linus Walleij
2022-01-27 0:36 ` [PATCH 01/13] ARM: ixp4xx: Delete Gateway 7001 boardfiles Linus Walleij
` (14 more replies)
0 siblings, 15 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
This cleans out the remaining board files from IXP4xx and
makes it an exclusive device tree subarchitecture without any
special weirdness in arch/arm/mach-ixp4xx.
The biggest noticeable change is the removal of the old PCI
driver and along with that the removal of the special DMA
coherency code and defines and the DMA bouncing.
I tried to convert the IXP4xx to multiplatform on top of
this but it didn't work because IXP4xx wants to be big
endian and multiplatform config creates a problem like
this:
../arch/arm/kernel/head.S: Assembler messages:
../arch/arm/kernel/head.S:94: Error: selected processor does not support `setend be' in ARM mode
I think this is because MULTI_V5 turns on CPUs that cannot
do big endian, and IXP4xx turn on big endian. (It crashes if
I try to boot in little endian mode, sorry. It really wants
to run big endian.)
But before fixing multiplatform we can fix all of this!
The networking patches are dependencies so I am requesting
ACKs from the network maintainers on these.
Linus Walleij (12):
ARM: ixp4xx: Delete the Goramo MLR boardfile
ARM: ixp4xx: Delete old PCI driver
ARM: ixp4xx: Drop stale Kconfig entry
ARM: ixp4xx: Drop UDC info setting function
soc: ixp4xx: Add features from regmap helper
soc: ixp4xx-npe: Access syscon regs using regmap
net: ixp4xx_eth: Drop platform data support
net: ixp4xx_hss: Check features using syscon
ARM: ixp4xx: Remove feature bit accessors
ARM: ixp4xx: Drop custom DMA coherency and bouncing
ARM: ixp4xx: Drop all common code
ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
Zoltan HERPAI (1):
ARM: ixp4xx: Delete Gateway 7001 boardfiles
arch/arm/Kconfig | 11 +-
arch/arm/mach-ixp4xx/Kconfig | 57 --
arch/arm/mach-ixp4xx/Makefile | 19 +-
arch/arm/mach-ixp4xx/common-pci.c | 451 ---------------
arch/arm/mach-ixp4xx/common.c | 448 --------------
arch/arm/mach-ixp4xx/gateway7001-pci.c | 61 --
arch/arm/mach-ixp4xx/gateway7001-setup.c | 113 ----
arch/arm/mach-ixp4xx/goramo_mlr.c | 532 -----------------
arch/arm/mach-ixp4xx/include/mach/hardware.h | 32 -
arch/arm/mach-ixp4xx/include/mach/io.h | 545 ------------------
.../mach-ixp4xx/include/mach/ixp4xx-regs.h | 303 ----------
arch/arm/mach-ixp4xx/include/mach/platform.h | 102 ----
arch/arm/mach-ixp4xx/include/mach/udc.h | 8 -
.../arm/mach-ixp4xx/include/mach/uncompress.h | 4 +-
arch/arm/mach-ixp4xx/irqs.h | 64 --
drivers/crypto/ixp4xx_crypto.c | 1 -
drivers/net/ethernet/xscale/Kconfig | 4 +-
drivers/net/ethernet/xscale/ixp4xx_eth.c | 69 +--
drivers/net/ethernet/xscale/ptp_ixp46x.c | 1 -
drivers/net/wan/Kconfig | 3 +-
drivers/net/wan/ixp4xx_hss.c | 39 +-
drivers/soc/ixp4xx/Kconfig | 1 +
drivers/soc/ixp4xx/ixp4xx-npe.c | 34 +-
include/linux/platform_data/eth_ixp4xx.h | 21 -
include/linux/platform_data/wan_ixp4xx_hss.h | 17 -
include/linux/soc/ixp4xx/cpu.h | 26 +-
include/linux/soc/ixp4xx/npe.h | 2 +
kernel/dma/mapping.c | 2 -
28 files changed, 99 insertions(+), 2871 deletions(-)
delete mode 100644 arch/arm/mach-ixp4xx/common-pci.c
delete mode 100644 arch/arm/mach-ixp4xx/common.c
delete mode 100644 arch/arm/mach-ixp4xx/gateway7001-pci.c
delete mode 100644 arch/arm/mach-ixp4xx/gateway7001-setup.c
delete mode 100644 arch/arm/mach-ixp4xx/goramo_mlr.c
delete mode 100644 arch/arm/mach-ixp4xx/include/mach/hardware.h
delete mode 100644 arch/arm/mach-ixp4xx/include/mach/io.h
delete mode 100644 arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
delete mode 100644 arch/arm/mach-ixp4xx/include/mach/platform.h
delete mode 100644 arch/arm/mach-ixp4xx/include/mach/udc.h
delete mode 100644 arch/arm/mach-ixp4xx/irqs.h
delete mode 100644 include/linux/platform_data/eth_ixp4xx.h
delete mode 100644 include/linux/platform_data/wan_ixp4xx_hss.h
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 01/13] ARM: ixp4xx: Delete Gateway 7001 boardfiles
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 02/13] ARM: ixp4xx: Delete the Goramo MLR boardfile Linus Walleij
` (13 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Zoltan HERPAI, Linus Walleij
From: Zoltan HERPAI <wigyori@uid0.hu>
This board is replaced with the corresponding device tree.
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ixp4xx/Kconfig | 8 --
arch/arm/mach-ixp4xx/Makefile | 3 -
arch/arm/mach-ixp4xx/gateway7001-pci.c | 61 ------------
arch/arm/mach-ixp4xx/gateway7001-setup.c | 113 -----------------------
4 files changed, 185 deletions(-)
delete mode 100644 arch/arm/mach-ixp4xx/gateway7001-pci.c
delete mode 100644 arch/arm/mach-ixp4xx/gateway7001-setup.c
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 4c787b4be62b..e6b23c3ce50c 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -17,14 +17,6 @@ config MACH_IXP4XX_OF
help
Say 'Y' here to support Device Tree-based IXP4xx platforms.
-config MACH_GATEWAY7001
- bool "Gateway 7001"
- depends on IXP4XX_PCI_LEGACY
- help
- Say 'Y' here if you want your kernel to support Gateway's
- 7001 Access Point. For more information on this platform,
- see http://openwrt.org
-
config MACH_GORAMO_MLR
bool "GORAMO Multi Link Router"
depends on IXP4XX_PCI_LEGACY
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index b241094c9649..0a92f8c40e1c 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -9,11 +9,8 @@ obj-pci-n :=
# Device tree platform
obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o
-obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
-
obj-y += common.o
-obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
deleted file mode 100644
index 3c3ee9dad6d8..000000000000
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arch/mach-ixp4xx/gateway7001-pci.c
- *
- * PCI setup routines for Gateway 7001
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-pci.c:
- * Copyright (C) 2002 Jungo Software Technologies.
- * Copyright (C) 2003 MontaVista Softwrae, Inc.
- *
- * Maintainer: Imre Kaloz <kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-void __init gateway7001_pci_preinit(void)
-{
- irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
- irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-
- ixp4xx_pci_preinit();
-}
-
-static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot,
- u8 pin)
-{
- if (slot == 1)
- return IRQ_IXP4XX_GPIO11;
- else if (slot == 2)
- return IRQ_IXP4XX_GPIO10;
- else return -1;
-}
-
-struct hw_pci gateway7001_pci __initdata = {
- .nr_controllers = 1,
- .ops = &ixp4xx_ops,
- .preinit = gateway7001_pci_preinit,
- .setup = ixp4xx_setup,
- .map_irq = gateway7001_map_irq,
-};
-
-int __init gateway7001_pci_init(void)
-{
- if (machine_is_gateway7001())
- pci_common_init(&gateway7001_pci);
- return 0;
-}
-
-subsys_initcall(gateway7001_pci_init);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
deleted file mode 100644
index 678e7dfff0e5..000000000000
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/gateway7001-setup.c
- *
- * Board setup for the Gateway 7001 board
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Imre Kaloz <Kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-static struct flash_platform_data gateway7001_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-};
-
-static struct resource gateway7001_flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device gateway7001_flash = {
- .name = "IXP4XX-Flash",
- .id = 0,
- .dev = {
- .platform_data = &gateway7001_flash_data,
- },
- .num_resources = 1,
- .resource = &gateway7001_flash_resource,
-};
-
-static struct resource gateway7001_uart_resource = {
- .start = IXP4XX_UART2_BASE_PHYS,
- .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port gateway7001_uart_data[] = {
- {
- .mapbase = IXP4XX_UART2_BASE_PHYS,
- .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
- .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- { },
-};
-
-static struct platform_device gateway7001_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = gateway7001_uart_data,
- },
- .num_resources = 1,
- .resource = &gateway7001_uart_resource,
-};
-
-static struct platform_device *gateway7001_devices[] __initdata = {
- &gateway7001_flash,
- &gateway7001_uart
-};
-
-static void __init gateway7001_init(void)
-{
- ixp4xx_sys_init();
-
- gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
- *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
- *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
- platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
-}
-
-#ifdef CONFIG_MACH_GATEWAY7001
-MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
- /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .map_io = ixp4xx_map_io,
- .init_early = ixp4xx_init_early,
- .init_irq = ixp4xx_init_irq,
- .init_time = ixp4xx_timer_init,
- .atag_offset = 0x100,
- .init_machine = gateway7001_init,
-#if defined(CONFIG_PCI)
- .dma_zone_size = SZ_64M,
-#endif
- .restart = ixp4xx_restart,
-MACHINE_END
-#endif
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 02/13] ARM: ixp4xx: Delete the Goramo MLR boardfile
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
2022-01-27 0:36 ` [PATCH 01/13] ARM: ixp4xx: Delete Gateway 7001 boardfiles Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 03/13] ARM: ixp4xx: Delete old PCI driver Linus Walleij
` (12 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
This board is replaced with the corresponding device tree.
Also delete dangling platform data file only used by this
boardfile and nothing else.
Cc: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- New patch now that we have all we need in the device tree
we can drop the boardfile.
---
arch/arm/mach-ixp4xx/Kconfig | 7 -
arch/arm/mach-ixp4xx/Makefile | 2 -
arch/arm/mach-ixp4xx/goramo_mlr.c | 532 -------------------
include/linux/platform_data/wan_ixp4xx_hss.h | 17 -
4 files changed, 558 deletions(-)
delete mode 100644 arch/arm/mach-ixp4xx/goramo_mlr.c
delete mode 100644 include/linux/platform_data/wan_ixp4xx_hss.h
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index e6b23c3ce50c..0fac12cb31a6 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -17,13 +17,6 @@ config MACH_IXP4XX_OF
help
Say 'Y' here to support Device Tree-based IXP4xx platforms.
-config MACH_GORAMO_MLR
- bool "GORAMO Multi Link Router"
- depends on IXP4XX_PCI_LEGACY
- help
- Say 'Y' here if you want your kernel to support GORAMO
- MultiLink router.
-
config ARCH_PRPMC1100
bool "PrPMC1100"
help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 0a92f8c40e1c..83719704a626 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -11,6 +11,4 @@ obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o
obj-y += common.o
-obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
-
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
deleted file mode 100644
index 07b50dfcc489..000000000000
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ /dev/null
@@ -1,532 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Goramo MultiLink router platform code
- * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/hdlc.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/platform_data/wan_ixp4xx_hss.h>
-#include <linux/serial_8250.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/pci.h>
-#include <asm/system_info.h>
-
-#include "irqs.h"
-
-#define SLOT_ETHA 0x0B /* IDSEL = AD21 */
-#define SLOT_ETHB 0x0C /* IDSEL = AD20 */
-#define SLOT_MPCI 0x0D /* IDSEL = AD19 */
-#define SLOT_NEC 0x0E /* IDSEL = AD18 */
-
-/* GPIO lines */
-#define GPIO_SCL 0
-#define GPIO_SDA 1
-#define GPIO_STR 2
-#define GPIO_IRQ_NEC 3
-#define GPIO_IRQ_ETHA 4
-#define GPIO_IRQ_ETHB 5
-#define GPIO_HSS0_DCD_N 6
-#define GPIO_HSS1_DCD_N 7
-#define GPIO_UART0_DCD 8
-#define GPIO_UART1_DCD 9
-#define GPIO_HSS0_CTS_N 10
-#define GPIO_HSS1_CTS_N 11
-#define GPIO_IRQ_MPCI 12
-#define GPIO_HSS1_RTS_N 13
-#define GPIO_HSS0_RTS_N 14
-/* GPIO15 is not connected */
-
-/* Control outputs from 74HC4094 */
-#define CONTROL_HSS0_CLK_INT 0
-#define CONTROL_HSS1_CLK_INT 1
-#define CONTROL_HSS0_DTR_N 2
-#define CONTROL_HSS1_DTR_N 3
-#define CONTROL_EXT 4
-#define CONTROL_AUTO_RESET 5
-#define CONTROL_PCI_RESET_N 6
-#define CONTROL_EEPROM_WC_N 7
-
-/* offsets from start of flash ROM = 0x50000000 */
-#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */
-#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */
-#define CFG_REV 0x4C /* u32 */
-#define CFG_SDRAM_SIZE 0x50 /* u32 */
-#define CFG_SDRAM_CONF 0x54 /* u32 */
-#define CFG_SDRAM_MODE 0x58 /* u32 */
-#define CFG_SDRAM_REFRESH 0x5C /* u32 */
-
-#define CFG_HW_BITS 0x60 /* u32 */
-#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
-#define CFG_HW_HAS_PCI_SLOT 0x00000008
-#define CFG_HW_HAS_ETH0 0x00000010
-#define CFG_HW_HAS_ETH1 0x00000020
-#define CFG_HW_HAS_HSS0 0x00000040
-#define CFG_HW_HAS_HSS1 0x00000080
-#define CFG_HW_HAS_UART0 0x00000100
-#define CFG_HW_HAS_UART1 0x00000200
-#define CFG_HW_HAS_EEPROM 0x00000400
-
-#define FLASH_CMD_READ_ARRAY 0xFF
-#define FLASH_CMD_READ_ID 0x90
-#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */
-
-static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */;
-static u8 control_value;
-
-/*
- * FIXME: this is reimplementing I2C bit-bangining. Move this
- * over to using driver/i2c/busses/i2c-gpio.c like all other boards
- * and register proper I2C device(s) on the bus for this. (See
- * other IXP4xx boards for examples.)
- */
-static void set_scl(u8 value)
-{
- gpio_set_value(GPIO_SCL, !!value);
- udelay(3);
-}
-
-static void set_sda(u8 value)
-{
- gpio_set_value(GPIO_SDA, !!value);
- udelay(3);
-}
-
-static void set_str(u8 value)
-{
- gpio_set_value(GPIO_STR, !!value);
- udelay(3);
-}
-
-static inline void set_control(int line, int value)
-{
- if (value)
- control_value |= (1 << line);
- else
- control_value &= ~(1 << line);
-}
-
-
-static void output_control(void)
-{
- int i;
-
- gpio_direction_output(GPIO_SCL, 1);
- gpio_direction_output(GPIO_SDA, 1);
-
- for (i = 0; i < 8; i++) {
- set_scl(0);
- set_sda(control_value & (0x80 >> i)); /* MSB first */
- set_scl(1); /* active edge */
- }
-
- set_str(1);
- set_str(0);
-
- set_scl(0);
- set_sda(1); /* Be ready for START */
- set_scl(1);
-}
-
-
-static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
-
-static int hss_set_clock(int port, unsigned int clock_type)
-{
- int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
-
- switch (clock_type) {
- case CLOCK_DEFAULT:
- case CLOCK_EXT:
- set_control(ctrl_int, 0);
- output_control();
- return CLOCK_EXT;
-
- case CLOCK_INT:
- set_control(ctrl_int, 1);
- output_control();
- return CLOCK_INT;
-
- default:
- return -EINVAL;
- }
-}
-
-static irqreturn_t hss_dcd_irq(int irq, void *pdev)
-{
- int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
- int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
- set_carrier_cb_tab[port](pdev, !i);
- return IRQ_HANDLED;
-}
-
-
-static int hss_open(int port, void *pdev,
- void (*set_carrier_cb)(void *pdev, int carrier))
-{
- int i, irq;
-
- if (!port)
- irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N);
- else
- irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
-
- i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
- set_carrier_cb(pdev, !i);
-
- set_carrier_cb_tab[!!port] = set_carrier_cb;
-
- if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
- printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
- irq, i);
- return i;
- }
-
- set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
- output_control();
- gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
- return 0;
-}
-
-static void hss_close(int port, void *pdev)
-{
- free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) :
- IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev);
- set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
-
- set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
- output_control();
- gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
-}
-
-
-/* Flash memory */
-static struct flash_platform_data flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device device_flash = {
- .name = "IXP4XX-Flash",
- .id = 0,
- .dev = { .platform_data = &flash_data },
- .num_resources = 1,
- .resource = &flash_resource,
-};
-
-/* IXP425 2 UART ports */
-static struct resource uart_resources[] = {
- {
- .start = IXP4XX_UART1_BASE_PHYS,
- .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IXP4XX_UART2_BASE_PHYS,
- .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct plat_serial8250_port uart_data[] = {
- {
- .mapbase = IXP4XX_UART1_BASE_PHYS,
- .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT +
- REG_OFFSET,
- .irq = IRQ_IXP4XX_UART1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- {
- .mapbase = IXP4XX_UART2_BASE_PHYS,
- .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT +
- REG_OFFSET,
- .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- { },
-};
-
-static struct platform_device device_uarts = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev.platform_data = uart_data,
- .num_resources = 2,
- .resource = uart_resources,
-};
-
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource eth_npeb_resources[] = {
- {
- .start = IXP4XX_EthB_BASE_PHYS,
- .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource eth_npec_resources[] = {
- {
- .start = IXP4XX_EthC_BASE_PHYS,
- .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct eth_plat_info eth_plat[] = {
- {
- .phy = 0,
- .rxq = 3,
- .txreadyq = 32,
- }, {
- .phy = 1,
- .rxq = 4,
- .txreadyq = 33,
- }
-};
-
-static struct platform_device device_eth_tab[] = {
- {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = eth_plat,
- .num_resources = ARRAY_SIZE(eth_npeb_resources),
- .resource = eth_npeb_resources,
- }, {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEC,
- .dev.platform_data = eth_plat + 1,
- .num_resources = ARRAY_SIZE(eth_npec_resources),
- .resource = eth_npec_resources,
- }
-};
-
-
-/* IXP425 2 synchronous serial ports */
-static struct hss_plat_info hss_plat[] = {
- {
- .set_clock = hss_set_clock,
- .open = hss_open,
- .close = hss_close,
- .txreadyq = 34,
- }, {
- .set_clock = hss_set_clock,
- .open = hss_open,
- .close = hss_close,
- .txreadyq = 35,
- }
-};
-
-static struct platform_device device_hss_tab[] = {
- {
- .name = "ixp4xx_hss",
- .id = 0,
- .dev.platform_data = hss_plat,
- }, {
- .name = "ixp4xx_hss",
- .id = 1,
- .dev.platform_data = hss_plat + 1,
- }
-};
-
-
-static struct platform_device *device_tab[7] __initdata = {
- &device_flash, /* index 0 */
-};
-
-static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
- return __raw_readb(flash + addr);
-#else
- return __raw_readb(flash + (addr ^ 3));
-#endif
-}
-
-static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
- return __raw_readw(flash + addr);
-#else
- return __raw_readw(flash + (addr ^ 2));
-#endif
-}
-
-static void __init gmlr_init(void)
-{
- u8 __iomem *flash;
- int i, devices = 1; /* flash */
-
- ixp4xx_sys_init();
-
- if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
- printk(KERN_ERR "goramo-mlr: unable to access system"
- " configuration data\n");
- else {
- system_rev = __raw_readl(flash + CFG_REV);
- hw_bits = __raw_readl(flash + CFG_HW_BITS);
-
- for (i = 0; i < ETH_ALEN; i++) {
- eth_plat[0].hwaddr[i] =
- flash_readb(flash, CFG_ETH0_ADDRESS + i);
- eth_plat[1].hwaddr[i] =
- flash_readb(flash, CFG_ETH1_ADDRESS + i);
- }
-
- __raw_writew(FLASH_CMD_READ_ID, flash);
- system_serial_high = flash_readw(flash, FLASH_SER_OFF);
- system_serial_high <<= 16;
- system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
- system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
- system_serial_low <<= 16;
- system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
- __raw_writew(FLASH_CMD_READ_ARRAY, flash);
-
- iounmap(flash);
- }
-
- switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
- case CFG_HW_HAS_UART0:
- memset(&uart_data[1], 0, sizeof(uart_data[1]));
- device_uarts.num_resources = 1;
- break;
-
- case CFG_HW_HAS_UART1:
- device_uarts.dev.platform_data = &uart_data[1];
- device_uarts.resource = &uart_resources[1];
- device_uarts.num_resources = 1;
- break;
- }
- if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
- device_tab[devices++] = &device_uarts; /* max index 1 */
-
- if (hw_bits & CFG_HW_HAS_ETH0)
- device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
- if (hw_bits & CFG_HW_HAS_ETH1)
- device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
-
- if (hw_bits & CFG_HW_HAS_HSS0)
- device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
- if (hw_bits & CFG_HW_HAS_HSS1)
- device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
-
- hss_plat[0].timer_freq = ixp4xx_timer_freq;
- hss_plat[1].timer_freq = ixp4xx_timer_freq;
-
- gpio_request(GPIO_SCL, "SCL/clock");
- gpio_request(GPIO_SDA, "SDA/data");
- gpio_request(GPIO_STR, "strobe");
- gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS");
- gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS");
- gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD");
- gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD");
-
- gpio_direction_output(GPIO_SCL, 1);
- gpio_direction_output(GPIO_SDA, 1);
- gpio_direction_output(GPIO_STR, 0);
- gpio_direction_output(GPIO_HSS0_RTS_N, 1);
- gpio_direction_output(GPIO_HSS1_RTS_N, 1);
- gpio_direction_input(GPIO_HSS0_DCD_N);
- gpio_direction_input(GPIO_HSS1_DCD_N);
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
-
- set_control(CONTROL_HSS0_DTR_N, 1);
- set_control(CONTROL_HSS1_DTR_N, 1);
- set_control(CONTROL_EEPROM_WC_N, 1);
- set_control(CONTROL_PCI_RESET_N, 1);
- output_control();
-
- msleep(1); /* Wait for PCI devices to initialize */
-
- flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
- platform_add_devices(device_tab, devices);
-}
-
-
-#ifdef CONFIG_PCI
-static void __init gmlr_pci_preinit(void)
-{
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW);
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW);
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW);
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW);
- ixp4xx_pci_preinit();
-}
-
-static void __init gmlr_pci_postinit(void)
-{
- if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
- (hw_bits & CFG_HW_USB_PORTS) < 5) {
- /* need to adjust number of USB ports on NEC chip */
- u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
- if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
- value &= ~7;
- value |= (hw_bits & CFG_HW_USB_PORTS);
- ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
- }
- }
-}
-
-static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- switch(slot) {
- case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
- case SLOT_ETHB: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB);
- case SLOT_NEC: return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC);
- default: return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI);
- }
-}
-
-static struct hw_pci gmlr_hw_pci __initdata = {
- .nr_controllers = 1,
- .ops = &ixp4xx_ops,
- .preinit = gmlr_pci_preinit,
- .postinit = gmlr_pci_postinit,
- .setup = ixp4xx_setup,
- .map_irq = gmlr_map_irq,
-};
-
-static int __init gmlr_pci_init(void)
-{
- if (machine_is_goramo_mlr() &&
- (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
- pci_common_init(&gmlr_hw_pci);
- return 0;
-}
-
-subsys_initcall(gmlr_pci_init);
-#endif /* CONFIG_PCI */
-
-
-MACHINE_START(GORAMO_MLR, "MultiLink")
- /* Maintainer: Krzysztof Halasa */
- .map_io = ixp4xx_map_io,
- .init_early = ixp4xx_init_early,
- .init_irq = ixp4xx_init_irq,
- .init_time = ixp4xx_timer_init,
- .atag_offset = 0x100,
- .init_machine = gmlr_init,
-#if defined(CONFIG_PCI)
- .dma_zone_size = SZ_64M,
-#endif
- .restart = ixp4xx_restart,
-MACHINE_END
diff --git a/include/linux/platform_data/wan_ixp4xx_hss.h b/include/linux/platform_data/wan_ixp4xx_hss.h
deleted file mode 100644
index d525a0feb9e1..000000000000
--- a/include/linux/platform_data/wan_ixp4xx_hss.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PLATFORM_DATA_WAN_IXP4XX_HSS_H
-#define __PLATFORM_DATA_WAN_IXP4XX_HSS_H
-
-#include <linux/types.h>
-
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
- int (*set_clock)(int port, unsigned int clock_type);
- int (*open)(int port, void *pdev,
- void (*set_carrier_cb)(void *pdev, int carrier));
- void (*close)(int port, void *pdev);
- u8 txreadyq;
- u32 timer_freq;
-};
-
-#endif
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 03/13] ARM: ixp4xx: Delete old PCI driver
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
2022-01-27 0:36 ` [PATCH 01/13] ARM: ixp4xx: Delete Gateway 7001 boardfiles Linus Walleij
2022-01-27 0:36 ` [PATCH 02/13] ARM: ixp4xx: Delete the Goramo MLR boardfile Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 04/13] ARM: ixp4xx: Drop stale Kconfig entry Linus Walleij
` (11 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
We are just using the new PCI driver in the proper PCI host
drivers folder: drivers/pci/controller/pci-ixp4xx.c.
The new driver does not support indirect PCI but it has
turned out noone is using this. If the feature is desired
we have ways to implement it, suggested by John Linville.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/Kconfig | 2 -
arch/arm/mach-ixp4xx/Kconfig | 35 --
arch/arm/mach-ixp4xx/Makefile | 14 +-
arch/arm/mach-ixp4xx/common-pci.c | 451 ---------------
arch/arm/mach-ixp4xx/common.c | 28 -
arch/arm/mach-ixp4xx/include/mach/hardware.h | 6 -
arch/arm/mach-ixp4xx/include/mach/io.h | 545 -------------------
arch/arm/mach-ixp4xx/include/mach/platform.h | 4 -
8 files changed, 1 insertion(+), 1084 deletions(-)
delete mode 100644 arch/arm/mach-ixp4xx/common-pci.c
delete mode 100644 arch/arm/mach-ixp4xx/include/mach/io.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fabe39169b12..3a95203236d2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -391,8 +391,6 @@ config ARCH_IXP4XX
select HAVE_PCI
select IXP4XX_IRQ
select IXP4XX_TIMER
- # With the new PCI driver this is not needed
- select NEED_MACH_IO_H if IXP4XX_PCI_LEGACY
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
help
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 0fac12cb31a6..495cbfd2358d 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -24,41 +24,6 @@ config ARCH_PRPMC1100
PrPCM1100 Processor Mezanine Module. For more information on
this platform, see <file:Documentation/arm/ixp4xx.rst>.
-comment "IXP4xx Options"
-
-config IXP4XX_PCI_LEGACY
- bool "IXP4xx legacy PCI driver support"
- depends on PCI
- help
- Selects legacy PCI driver.
- Not recommended for new development.
-
-config IXP4XX_INDIRECT_PCI
- bool "Use indirect PCI memory access"
- depends on IXP4XX_PCI_LEGACY
- help
- IXP4xx provides two methods of accessing PCI memory space:
-
- 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- To access PCI via this space, we simply ioremap() the BAR
- into the kernel and we can use the standard read[bwl]/write[bwl]
- macros. This is the preferred method due to speed but it
- limits the system to just 64MB of PCI memory. This can be
- problematic if using video cards and other memory-heavy devices.
-
- 2) If > 64MB of memory space is required, the IXP4xx can be
- configured to use indirect registers to access the whole PCI
- memory space. This currently allows for up to 1 GB (0x10000000
- to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
- is that every PCI access requires three local register accesses
- plus a spinlock, but in some cases the performance hit is
- acceptable. In addition, you cannot mmap() PCI devices in this
- case due to the indirect nature of the PCI window.
-
- By default, the direct method is used. Choose this option if you
- need to use the indirect method instead. If you don't know
- what you need, leave this option unselected.
-
endmenu
endif
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 83719704a626..4ebe35227bf6 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -1,14 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-obj-pci-y :=
-obj-pci-n :=
-
-# Device tree platform
-obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o
-
-obj-y += common.o
-
-obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+obj-y += ixp4xx-of.o common.o
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
deleted file mode 100644
index 893c19c254e3..000000000000
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/common-pci.c
- *
- * IXP4XX PCI routines for all platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/dma-mapping.h>
-
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-
-/*
- * IXP4xx PCI read function is dependent on whether we are
- * running A0 or B0 (AppleGate) silicon.
- */
-int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-
-/*
- * Base address for PCI register region
- */
-unsigned long ixp4xx_pci_reg_base = 0;
-
-/*
- * PCI cfg an I/O routines are done by programming a
- * command/byte enable register, and then read/writing
- * the data from a data register. We need to ensure
- * these transactions are atomic or we will end up
- * with corrupt data on the bus or in a driver.
- */
-static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock);
-
-/*
- * Read from PCI config space
- */
-static void crp_read(u32 ad_cbe, u32 *data)
-{
- unsigned long flags;
- raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
- *PCI_CRP_AD_CBE = ad_cbe;
- *data = *PCI_CRP_RDATA;
- raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-/*
- * Write to PCI config space
- */
-static void crp_write(u32 ad_cbe, u32 data)
-{
- unsigned long flags;
- raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
- *PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe;
- *PCI_CRP_WDATA = data;
- raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-static inline int check_master_abort(void)
-{
- /* check Master Abort bit after access */
- unsigned long isr = *PCI_ISR;
-
- if (isr & PCI_ISR_PFE) {
- /* make sure the Master Abort bit is reset */
- *PCI_ISR = PCI_ISR_PFE;
- pr_debug("%s failed\n", __func__);
- return 1;
- }
-
- return 0;
-}
-
-int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data)
-{
- unsigned long flags;
- int retval = 0;
- int i;
-
- raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
- *PCI_NP_AD = addr;
-
- /*
- * PCI workaround - only works if NP PCI space reads have
- * no side effects!!! Read 8 times. last one will be good.
- */
- for (i = 0; i < 8; i++) {
- *PCI_NP_CBE = cmd;
- *data = *PCI_NP_RDATA;
- *data = *PCI_NP_RDATA;
- }
-
- if(check_master_abort())
- retval = 1;
-
- raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
- return retval;
-}
-
-int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data)
-{
- unsigned long flags;
- int retval = 0;
-
- raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
- *PCI_NP_AD = addr;
-
- /* set up and execute the read */
- *PCI_NP_CBE = cmd;
-
- /* the result of the read is now in NP_RDATA */
- *data = *PCI_NP_RDATA;
-
- if(check_master_abort())
- retval = 1;
-
- raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
- return retval;
-}
-
-int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data)
-{
- unsigned long flags;
- int retval = 0;
-
- raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
- *PCI_NP_AD = addr;
-
- /* set up the write */
- *PCI_NP_CBE = cmd;
-
- /* execute the write by writing to NP_WDATA */
- *PCI_NP_WDATA = data;
-
- if(check_master_abort())
- retval = 1;
-
- raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
- return retval;
-}
-
-static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where)
-{
- u32 addr;
- if (!bus_num) {
- /* type 0 */
- addr = BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) |
- (where & ~3);
- } else {
- /* type 1 */
- addr = (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) |
- ((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1;
- }
- return addr;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
- /*0*/ 0,
- /*1*/ 0xff,
- /*2*/ 0xffff,
- /*3*/ 0,
- /*4*/ 0xffffffff,
-};
-
-static u32 local_byte_lane_enable_bits(u32 n, int size)
-{
- if (size == 1)
- return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL;
- if (size == 2)
- return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL;
- if (size == 4)
- return 0;
- return 0xffffffff;
-}
-
-static int local_read_config(int where, int size, u32 *value)
-{
- u32 n, data;
- pr_debug("local_read_config from %d size %d\n", where, size);
- n = where % 4;
- crp_read(where & ~3, &data);
- *value = (data >> (8*n)) & bytemask[size];
- pr_debug("local_read_config read %#x\n", *value);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int local_write_config(int where, int size, u32 value)
-{
- u32 n, byte_enables, data;
- pr_debug("local_write_config %#x to %d size %d\n", value, where, size);
- n = where % 4;
- byte_enables = local_byte_lane_enable_bits(n, size);
- if (byte_enables == 0xffffffff)
- return PCIBIOS_BAD_REGISTER_NUMBER;
- data = value << (8*n);
- crp_write((where & ~3) | byte_enables, data);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static u32 byte_lane_enable_bits(u32 n, int size)
-{
- if (size == 1)
- return (0xf & ~BIT(n)) << 4;
- if (size == 2)
- return (0xf & ~(BIT(n) | BIT(n+1))) << 4;
- if (size == 4)
- return 0;
- return 0xffffffff;
-}
-
-static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
- u32 n, byte_enables, addr, data;
- u8 bus_num = bus->number;
-
- pr_debug("read_config from %d size %d dev %d:%d:%d\n", where, size,
- bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
- *value = 0xffffffff;
- n = where % 4;
- byte_enables = byte_lane_enable_bits(n, size);
- if (byte_enables == 0xffffffff)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- addr = ixp4xx_config_addr(bus_num, devfn, where);
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_CONFIGREAD, &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *value = (data >> (8*n)) & bytemask[size];
- pr_debug("read_config_byte read %#x\n", *value);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int ixp4xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-{
- u32 n, byte_enables, addr, data;
- u8 bus_num = bus->number;
-
- pr_debug("write_config_byte %#x to %d size %d dev %d:%d:%d\n", value, where,
- size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
- n = where % 4;
- byte_enables = byte_lane_enable_bits(n, size);
- if (byte_enables == 0xffffffff)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- addr = ixp4xx_config_addr(bus_num, devfn, where);
- data = value << (8*n);
- if (ixp4xx_pci_write(addr, byte_enables | NP_CMD_CONFIGWRITE, data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops ixp4xx_ops = {
- .read = ixp4xx_pci_read_config,
- .write = ixp4xx_pci_write_config,
-};
-
-/*
- * PCI abort handler
- */
-static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- u32 isr, status;
-
- isr = *PCI_ISR;
- local_read_config(PCI_STATUS, 2, &status);
- pr_debug("PCI: abort_handler addr = %#lx, isr = %#x, "
- "status = %#x\n", addr, isr, status);
-
- /* make sure the Master Abort bit is reset */
- *PCI_ISR = PCI_ISR_PFE;
- status |= PCI_STATUS_REC_MASTER_ABORT;
- local_write_config(PCI_STATUS, 2, status);
-
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return 0;
-}
-
-void __init ixp4xx_pci_preinit(void)
-{
- unsigned long cpuid = read_cpuid_id();
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
- pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */
-#else
- pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */
-#endif
- /*
- * Determine which PCI read method to use.
- * Rev 0 IXP425 requires workaround.
- */
- if (!(cpuid & 0xf) && cpu_is_ixp42x()) {
- printk("PCI: IXP42x A0 silicon detected - "
- "PCI Non-Prefetch Workaround Enabled\n");
- ixp4xx_pci_read = ixp4xx_pci_read_errata;
- } else
- ixp4xx_pci_read = ixp4xx_pci_read_no_errata;
-
-
- /* hook in our fault handler for PCI errors */
- hook_fault_code(16+6, abort_handler, SIGBUS, 0,
- "imprecise external abort");
-
- pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
-
- /*
- * We use identity AHB->PCI address translation
- * in the 0x48000000 to 0x4bffffff address space
- */
- *PCI_PCIMEMBASE = 0x48494A4B;
-
- /*
- * We also use identity PCI->AHB address translation
- * in 4 16MB BARs that begin at the physical memory start
- */
- *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
- ((PHYS_OFFSET & 0xFF000000) >> 8) +
- ((PHYS_OFFSET & 0xFF000000) >> 16) +
- ((PHYS_OFFSET & 0xFF000000) >> 24) +
- 0x00010203;
-
- if (*PCI_CSR & PCI_CSR_HOST) {
- printk("PCI: IXP4xx is host\n");
-
- pr_debug("setup BARs in controller\n");
-
- /*
- * We configure the PCI inbound memory windows to be
- * 1:1 mapped to SDRAM
- */
- local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
- local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
- local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
- local_write_config(PCI_BASE_ADDRESS_3, 4,
- PHYS_OFFSET + SZ_32M + SZ_16M);
-
- /*
- * Enable CSR window at 64 MiB to allow PCI masters
- * to continue prefetching past 64 MiB boundary.
- */
- local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
-
- /*
- * Enable the IO window to be way up high, at 0xfffffc00
- */
- local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
- local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */
- } else {
- printk("PCI: IXP4xx is target - No bus scan performed\n");
- }
-
- printk("PCI: IXP4xx Using %s access for memory space\n",
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- "direct"
-#else
- "indirect"
-#endif
- );
-
- pr_debug("clear error bits in ISR\n");
- *PCI_ISR = PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE;
-
- /*
- * Set Initialize Complete in PCI Control Register: allow IXP4XX to
- * respond to PCI configuration cycles. Specify that the AHB bus is
- * operating in big endian mode. Set up byte lane swapping between
- * little-endian PCI and the big-endian AHB bus
- */
-#ifdef __ARMEB__
- *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
-#else
- *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
-#endif
-
- pr_debug("DONE\n");
-}
-
-int ixp4xx_setup(int nr, struct pci_sys_data *sys)
-{
- struct resource *res;
-
- if (nr >= 1)
- return 0;
-
- res = kcalloc(2, sizeof(*res), GFP_KERNEL);
- if (res == NULL) {
- /*
- * If we're out of memory this early, something is wrong,
- * so we might as well catch it here.
- */
- panic("PCI: unable to allocate resources?\n");
- }
-
- local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
- res[0].name = "PCI I/O Space";
- res[0].start = 0x00000000;
- res[0].end = 0x0000ffff;
- res[0].flags = IORESOURCE_IO;
-
- res[1].name = "PCI Memory Space";
- res[1].start = PCIBIOS_MIN_MEM;
- res[1].end = PCIBIOS_MAX_MEM;
- res[1].flags = IORESOURCE_MEM;
-
- request_resource(&ioport_resource, &res[0]);
- request_resource(&iomem_resource, &res[1]);
-
- pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
- return 1;
-}
-
-EXPORT_SYMBOL(ixp4xx_pci_read);
-EXPORT_SYMBOL(ixp4xx_pci_write);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index cdc720f54daa..1116bd2df687 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -411,38 +411,10 @@ int dma_set_coherent_mask(struct device *dev, u64 mask)
}
EXPORT_SYMBOL(dma_set_coherent_mask);
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size,
- unsigned int mtype, void *caller)
-{
- if (!is_pci_memory(addr))
- return __arm_ioremap_caller(addr, size, mtype, caller);
-
- return (void __iomem *)addr;
-}
-
-static void ixp4xx_iounmap(volatile void __iomem *addr)
-{
- if (!is_pci_memory((__force u32)addr))
- __iounmap(addr);
-}
-#endif
-
void __init ixp4xx_init_early(void)
{
platform_notify = ixp4xx_platform_notify;
#ifdef CONFIG_PCI
platform_notify_remove = ixp4xx_platform_notify_remove;
#endif
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
- arch_ioremap_caller = ixp4xx_ioremap_caller;
- arch_iounmap = ixp4xx_iounmap;
-#endif
}
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index b2b7301ce503..41f28fb8e63f 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -13,12 +13,6 @@
#ifndef __ASM_ARCH_HARDWARE_H__
#define __ASM_ARCH_HARDWARE_H__
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-#define PCIBIOS_MAX_MEM 0x4FFFFFFF
-#else
-#define PCIBIOS_MAX_MEM 0x4BFFFFFF
-#endif
-
/* Register locations and bits */
#include "ixp4xx-regs.h"
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
deleted file mode 100644
index 014cf6dcaf8b..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ /dev/null
@@ -1,545 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/io.h
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2005 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <linux/bitops.h>
-
-#include <mach/hardware.h>
-
-extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-
-
-/*
- * IXP4xx provides two methods of accessing PCI memory space:
- *
- * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- * To access PCI via this space, we simply ioremap() the BAR
- * into the kernel and we can use the standard read[bwl]/write[bwl]
- * macros. This is the preffered method due to speed but it
- * limits the system to just 64MB of PCI memory. This can be
- * problematic if using video cards and other memory-heavy targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can use indirect
- * registers to access the whole 4 GB of PCI memory space (as we do below
- * for I/O transactions). This allows currently for up to 1 GB (0x10000000
- * to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that
- * every PCI access requires three local register accesses plus a spinlock,
- * but in some cases the performance hit is acceptable. In addition, you
- * cannot mmap() PCI devices in this case.
- */
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-extern unsigned long pcibios_min_mem;
-static inline int is_pci_memory(u32 addr)
-{
- return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF);
-}
-
-#define writeb(v, p) __indirect_writeb(v, p)
-#define writew(v, p) __indirect_writew(v, p)
-#define writel(v, p) __indirect_writel(v, p)
-
-#define writeb_relaxed(v, p) __indirect_writeb(v, p)
-#define writew_relaxed(v, p) __indirect_writew(v, p)
-#define writel_relaxed(v, p) __indirect_writel(v, p)
-
-#define writesb(p, v, l) __indirect_writesb(p, v, l)
-#define writesw(p, v, l) __indirect_writesw(p, v, l)
-#define writesl(p, v, l) __indirect_writesl(p, v, l)
-
-#define readb(p) __indirect_readb(p)
-#define readw(p) __indirect_readw(p)
-#define readl(p) __indirect_readl(p)
-
-#define readb_relaxed(p) __indirect_readb(p)
-#define readw_relaxed(p) __indirect_readw(p)
-#define readl_relaxed(p) __indirect_readl(p)
-
-#define readsb(p, v, l) __indirect_readsb(p, v, l)
-#define readsw(p, v, l) __indirect_readsw(p, v, l)
-#define readsl(p, v, l) __indirect_readsl(p, v, l)
-
-static inline void __indirect_writeb(u8 value, volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (!is_pci_memory(addr)) {
- __raw_writeb(value, p);
- return;
- }
-
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesb(volatile void __iomem *bus_addr,
- const void *p, int count)
-{
- const u8 *vaddr = p;
-
- while (count--)
- writeb(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writew(u16 value, volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (!is_pci_memory(addr)) {
- __raw_writew(value, p);
- return;
- }
-
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesw(volatile void __iomem *bus_addr,
- const void *p, int count)
-{
- const u16 *vaddr = p;
-
- while (count--)
- writew(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writel(u32 value, volatile void __iomem *p)
-{
- u32 addr = (__force u32)p;
-
- if (!is_pci_memory(addr)) {
- __raw_writel(value, p);
- return;
- }
-
- ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
-}
-
-static inline void __indirect_writesl(volatile void __iomem *bus_addr,
- const void *p, int count)
-{
- const u32 *vaddr = p;
- while (count--)
- writel(*vaddr++, bus_addr);
-}
-
-static inline u8 __indirect_readb(const volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (!is_pci_memory(addr))
- return __raw_readb(p);
-
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
- return 0xff;
-
- return data >> (8*n);
-}
-
-static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
- void *p, u32 count)
-{
- u8 *vaddr = p;
-
- while (count--)
- *vaddr++ = readb(bus_addr);
-}
-
-static inline u16 __indirect_readw(const volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (!is_pci_memory(addr))
- return __raw_readw(p);
-
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
- return 0xffff;
-
- return data>>(8*n);
-}
-
-static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
- void *p, u32 count)
-{
- u16 *vaddr = p;
-
- while (count--)
- *vaddr++ = readw(bus_addr);
-}
-
-static inline u32 __indirect_readl(const volatile void __iomem *p)
-{
- u32 addr = (__force u32)p;
- u32 data;
-
- if (!is_pci_memory(addr))
- return __raw_readl(p);
-
- if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
- return 0xffffffff;
-
- return data;
-}
-
-static inline void __indirect_readsl(const volatile void __iomem *bus_addr,
- void *p, u32 count)
-{
- u32 *vaddr = p;
-
- while (count--)
- *vaddr++ = readl(bus_addr);
-}
-
-
-/*
- * We can use the built-in functions b/c they end up calling writeb/readb
- */
-#define memset_io(c,v,l) _memset_io((c),(v),(l))
-#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l))
-#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l))
-
-#endif /* CONFIG_IXP4XX_INDIRECT_PCI */
-
-#ifndef CONFIG_PCI
-
-#define __io(v) __typesafe_io(v)
-
-#else
-
-/*
- * IXP4xx does not have a transparent cpu -> PCI I/O translation
- * window. Instead, it has a set of registers that must be tweaked
- * with the proper byte lanes, command types, and address for the
- * transaction. This means that we need to override the default
- * I/O functions.
- */
-
-#define outb outb
-static inline void outb(u8 value, u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-#define outsb outsb
-static inline void outsb(u32 io_addr, const void *p, u32 count)
-{
- const u8 *vaddr = p;
-
- while (count--)
- outb(*vaddr++, io_addr);
-}
-
-#define outw outw
-static inline void outw(u16 value, u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-#define outsw outsw
-static inline void outsw(u32 io_addr, const void *p, u32 count)
-{
- const u16 *vaddr = p;
- while (count--)
- outw(cpu_to_le16(*vaddr++), io_addr);
-}
-
-#define outl outl
-static inline void outl(u32 value, u32 addr)
-{
- ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
-}
-
-#define outsl outsl
-static inline void outsl(u32 io_addr, const void *p, u32 count)
-{
- const u32 *vaddr = p;
- while (count--)
- outl(cpu_to_le32(*vaddr++), io_addr);
-}
-
-#define inb inb
-static inline u8 inb(u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
- return 0xff;
-
- return data >> (8*n);
-}
-
-#define insb insb
-static inline void insb(u32 io_addr, void *p, u32 count)
-{
- u8 *vaddr = p;
- while (count--)
- *vaddr++ = inb(io_addr);
-}
-
-#define inw inw
-static inline u16 inw(u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
- return 0xffff;
-
- return data>>(8*n);
-}
-
-#define insw insw
-static inline void insw(u32 io_addr, void *p, u32 count)
-{
- u16 *vaddr = p;
- while (count--)
- *vaddr++ = le16_to_cpu(inw(io_addr));
-}
-
-#define inl inl
-static inline u32 inl(u32 addr)
-{
- u32 data;
- if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
- return 0xffffffff;
-
- return data;
-}
-
-#define insl insl
-static inline void insl(u32 io_addr, void *p, u32 count)
-{
- u32 *vaddr = p;
- while (count--)
- *vaddr++ = le32_to_cpu(inl(io_addr));
-}
-
-#define PIO_OFFSET 0x10000UL
-#define PIO_MASK 0x0ffffUL
-
-#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \
- ((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-
-#define ioread8(p) ioread8(p)
-static inline u8 ioread8(const void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- return (unsigned int)inb(port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return (unsigned int)__raw_readb(addr);
-#else
- return (unsigned int)__indirect_readb(addr);
-#endif
-}
-
-#define ioread8_rep(p, v, c) ioread8_rep(p, v, c)
-static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- insb(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsb(addr, vaddr, count);
-#else
- __indirect_readsb(addr, vaddr, count);
-#endif
-}
-
-#define ioread16(p) ioread16(p)
-static inline u16 ioread16(const void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- return (unsigned int)inw(port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le16_to_cpu((__force __le16)__raw_readw(addr));
-#else
- return (unsigned int)__indirect_readw(addr);
-#endif
-}
-
-#define ioread16_rep(p, v, c) ioread16_rep(p, v, c)
-static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
- u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- insw(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsw(addr, vaddr, count);
-#else
- __indirect_readsw(addr, vaddr, count);
-#endif
-}
-
-#define ioread32(p) ioread32(p)
-static inline u32 ioread32(const void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- return (unsigned int)inl(port & PIO_MASK);
- else {
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le32_to_cpu((__force __le32)__raw_readl(addr));
-#else
- return (unsigned int)__indirect_readl(addr);
-#endif
- }
-}
-
-#define ioread32_rep(p, v, c) ioread32_rep(p, v, c)
-static inline void ioread32_rep(const void __iomem *addr, void *vaddr,
- u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- insl(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsl(addr, vaddr, count);
-#else
- __indirect_readsl(addr, vaddr, count);
-#endif
-}
-
-#define iowrite8(v, p) iowrite8(v, p)
-static inline void iowrite8(u8 value, void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outb(value, port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writeb(value, addr);
-#else
- __indirect_writeb(value, addr);
-#endif
-}
-
-#define iowrite8_rep(p, v, c) iowrite8_rep(p, v, c)
-static inline void iowrite8_rep(void __iomem *addr, const void *vaddr,
- u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outsb(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesb(addr, vaddr, count);
-#else
- __indirect_writesb(addr, vaddr, count);
-#endif
-}
-
-#define iowrite16(v, p) iowrite16(v, p)
-static inline void iowrite16(u16 value, void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outw(value, port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writew(cpu_to_le16(value), addr);
-#else
- __indirect_writew(value, addr);
-#endif
-}
-
-#define iowrite16_rep(p, v, c) iowrite16_rep(p, v, c)
-static inline void iowrite16_rep(void __iomem *addr, const void *vaddr,
- u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outsw(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesw(addr, vaddr, count);
-#else
- __indirect_writesw(addr, vaddr, count);
-#endif
-}
-
-#define iowrite32(v, p) iowrite32(v, p)
-static inline void iowrite32(u32 value, void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outl(value, port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writel((u32 __force)cpu_to_le32(value), addr);
-#else
- __indirect_writel(value, addr);
-#endif
-}
-
-#define iowrite32_rep(p, v, c) iowrite32_rep(p, v, c)
-static inline void iowrite32_rep(void __iomem *addr, const void *vaddr,
- u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outsl(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesl(addr, vaddr, count);
-#else
- __indirect_writesl(addr, vaddr, count);
-#endif
-}
-
-#define ioport_map(port, nr) ioport_map(port, nr)
-static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
- return ((void __iomem*)((port) + PIO_OFFSET));
-}
-#define ioport_unmap(addr) ioport_unmap(addr)
-static inline void ioport_unmap(void __iomem *addr)
-{
-}
-#endif /* CONFIG_PCI */
-
-#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index d8b4df96db08..f9ec07f00be0 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -93,10 +93,6 @@ extern void ixp4xx_init_irq(void);
extern void ixp4xx_sys_init(void);
extern void ixp4xx_timer_init(void);
extern void ixp4xx_restart(enum reboot_mode, const char *);
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_ops ixp4xx_ops;
#endif // __ASSEMBLY__
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 04/13] ARM: ixp4xx: Drop stale Kconfig entry
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
` (2 preceding siblings ...)
2022-01-27 0:36 ` [PATCH 03/13] ARM: ixp4xx: Delete old PCI driver Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 05/13] ARM: ixp4xx: Drop UDC info setting function Linus Walleij
` (10 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
The Kconfig entry for the Motorola PrPMC1100 was added to the
kernel in the very first git import for v2.6.12-rc2 in 2005.
But it was never used for anything since it was not accompanied
by any boardfile.
It is easy to support with a device tree if someone needs it,
delete this stray Kconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ixp4xx/Kconfig | 7 -------
1 file changed, 7 deletions(-)
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 495cbfd2358d..f41ba3f42fc8 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -17,13 +17,6 @@ config MACH_IXP4XX_OF
help
Say 'Y' here to support Device Tree-based IXP4xx platforms.
-config ARCH_PRPMC1100
- bool "PrPMC1100"
- help
- Say 'Y' here if you want your kernel to support the Motorola
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
endmenu
endif
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 05/13] ARM: ixp4xx: Drop UDC info setting function
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
` (3 preceding siblings ...)
2022-01-27 0:36 ` [PATCH 04/13] ARM: ixp4xx: Drop stale Kconfig entry Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 06/13] soc: ixp4xx: Add features from regmap helper Linus Walleij
` (9 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
The IXP4xx has a callback to "set UDC info" for the USB but
nothing in the kernel is using it. Delete it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ixp4xx/common.c | 11 -----------
arch/arm/mach-ixp4xx/include/mach/udc.h | 8 --------
2 files changed, 19 deletions(-)
delete mode 100644 arch/arm/mach-ixp4xx/include/mach/udc.h
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 1116bd2df687..5192cf621f5b 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -31,7 +31,6 @@
#include <linux/irqchip/irq-ixp4xx.h>
#include <linux/platform_data/timer-ixp4xx.h>
#include <linux/dma-map-ops.h>
-#include <mach/udc.h>
#include <mach/hardware.h>
#include <linux/uaccess.h>
#include <asm/page.h>
@@ -113,13 +112,6 @@ void __init ixp4xx_timer_init(void)
IXP4XX_TIMER_FREQ);
}
-static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
-
-void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
- memcpy(&ixp4xx_udc_info, info, sizeof *info);
-}
-
static struct resource ixp4xx_udc_resources[] = {
[0] = {
.start = 0xc800b000,
@@ -160,9 +152,6 @@ static struct platform_device ixp4xx_udc_device = {
.id = -1,
.num_resources = 2,
.resource = ixp4xx_udc_resources,
- .dev = {
- .platform_data = &ixp4xx_udc_info,
- },
};
static struct resource ixp4xx_npe_resources[] = {
diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
deleted file mode 100644
index 7bd8b96c8843..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/udc.h
- *
- */
-#include <linux/platform_data/pxa2xx_udc.h>
-
-extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 06/13] soc: ixp4xx: Add features from regmap helper
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
` (4 preceding siblings ...)
2022-01-27 0:36 ` [PATCH 05/13] ARM: ixp4xx: Drop UDC info setting function Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 07/13] soc: ixp4xx-npe: Access syscon regs using regmap Linus Walleij
` (8 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
If we want to read the CFG2 register on the expansion bus and
apply the inversion and check for some hardcoded versions this
helper comes in handy.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
include/linux/soc/ixp4xx/cpu.h | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/include/linux/soc/ixp4xx/cpu.h b/include/linux/soc/ixp4xx/cpu.h
index 88bd8de0e803..48c2e241ac83 100644
--- a/include/linux/soc/ixp4xx/cpu.h
+++ b/include/linux/soc/ixp4xx/cpu.h
@@ -9,6 +9,7 @@
#define __SOC_IXP4XX_CPU_H__
#include <linux/io.h>
+#include <linux/regmap.h>
#ifdef CONFIG_ARM
#include <asm/cputype.h>
#endif
@@ -23,6 +24,9 @@
#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */
#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0
+/* Feature register in the expansion bus controller */
+#define IXP4XX_EXP_CNFG2 0x2c
+
/* "fuse" bits of IXP_EXP_CFG2 */
/* All IXP4xx CPUs */
#define IXP4XX_FEATURE_RCOMP (1 << 0)
@@ -89,6 +93,22 @@
u32 ixp4xx_read_feature_bits(void);
void ixp4xx_write_feature_bits(u32 value);
+static inline u32 cpu_ixp4xx_features(struct regmap *rmap)
+{
+ u32 val;
+
+ regmap_read(rmap, IXP4XX_EXP_CNFG2, &val);
+ /* For some reason this register is inverted */
+ val = ~val;
+ if (cpu_is_ixp42x_rev_a0())
+ return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+ IXP4XX_FEATURE_AES);
+ if (cpu_is_ixp42x())
+ return val & IXP42X_FEATURE_MASK;
+ if (cpu_is_ixp43x())
+ return val & IXP43X_FEATURE_MASK;
+ return val & IXP46X_FEATURE_MASK;
+}
#else
#define cpu_is_ixp42x_rev_a0() 0
#define cpu_is_ixp42x() 0
@@ -101,6 +121,10 @@ static inline u32 ixp4xx_read_feature_bits(void)
static inline void ixp4xx_write_feature_bits(u32 value)
{
}
+static inline u32 cpu_ixp4xx_features(struct regmap *rmap)
+{
+ return 0;
+}
#endif
#endif /* _ASM_ARCH_CPU_H */
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 07/13] soc: ixp4xx-npe: Access syscon regs using regmap
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
` (5 preceding siblings ...)
2022-01-27 0:36 ` [PATCH 06/13] soc: ixp4xx: Add features from regmap helper Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` Linus Walleij
` (7 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
If we access the syscon (expansion bus config registers) using the
syscon regmap instead of relying on direct accessor functions,
we do not need to call this static code in the machine
(arch/arm/mach-ixp4xx/common.c) which makes things less dependent
on custom machine-dependent code.
Look up the syscon regmap and handle the error: this will make
deferred probe work with relation to the syscon.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/soc/ixp4xx/Kconfig | 1 +
drivers/soc/ixp4xx/ixp4xx-npe.c | 34 ++++++++++++++++++++++++---------
include/linux/soc/ixp4xx/npe.h | 2 ++
3 files changed, 28 insertions(+), 9 deletions(-)
diff --git a/drivers/soc/ixp4xx/Kconfig b/drivers/soc/ixp4xx/Kconfig
index e3eb19b85fa4..c55f0c9ae513 100644
--- a/drivers/soc/ixp4xx/Kconfig
+++ b/drivers/soc/ixp4xx/Kconfig
@@ -12,6 +12,7 @@ config IXP4XX_QMGR
config IXP4XX_NPE
tristate "IXP4xx Network Processor Engine support"
select FW_LOADER
+ select MFD_SYSCON
help
This driver supports IXP4xx built-in network coprocessors
and is automatically selected by Ethernet and HSS drivers.
diff --git a/drivers/soc/ixp4xx/ixp4xx-npe.c b/drivers/soc/ixp4xx/ixp4xx-npe.c
index f490c4ca51f5..4fbbd6aca7e1 100644
--- a/drivers/soc/ixp4xx/ixp4xx-npe.c
+++ b/drivers/soc/ixp4xx/ixp4xx-npe.c
@@ -16,6 +16,7 @@
#include <linux/firmware.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -284,6 +285,7 @@ static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
static int npe_reset(struct npe *npe)
{
+ u32 reset_bit = (IXP4XX_FEATURE_RESET_NPEA << npe->id);
u32 val, ctl, exec_count, ctx_reg2;
int i;
@@ -380,16 +382,19 @@ static int npe_reset(struct npe *npe)
__raw_writel(0, &npe->regs->action_points[3]);
__raw_writel(0, &npe->regs->watch_count);
- val = ixp4xx_read_feature_bits();
+ /*
+ * We need to work on cached values here because the register
+ * will read inverted but needs to be written non-inverted.
+ */
+ val = cpu_ixp4xx_features(npe->rmap);
/* reset the NPE */
- ixp4xx_write_feature_bits(val &
- ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
+ regmap_write(npe->rmap, IXP4XX_EXP_CNFG2, val & ~reset_bit);
/* deassert reset */
- ixp4xx_write_feature_bits(val |
- (IXP4XX_FEATURE_RESET_NPEA << npe->id));
+ regmap_write(npe->rmap, IXP4XX_EXP_CNFG2, val | reset_bit);
+
for (i = 0; i < MAX_RETRIES; i++) {
- if (ixp4xx_read_feature_bits() &
- (IXP4XX_FEATURE_RESET_NPEA << npe->id))
+ val = cpu_ixp4xx_features(npe->rmap);
+ if (val & reset_bit)
break; /* NPE is back alive */
udelay(1);
}
@@ -683,6 +688,15 @@ static int ixp4xx_npe_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct resource *res;
+ struct regmap *rmap;
+ u32 val;
+ int ret;
+
+ /* This system has only one syscon, so fetch it */
+ rmap = syscon_regmap_lookup_by_compatible("syscon");
+ if (IS_ERR(rmap))
+ return dev_err_probe(dev, PTR_ERR(rmap),
+ "failed to look up syscon\n");
for (i = 0; i < NPE_COUNT; i++) {
struct npe *npe = &npe_tab[i];
@@ -691,8 +705,9 @@ static int ixp4xx_npe_probe(struct platform_device *pdev)
if (!res)
return -ENODEV;
- if (!(ixp4xx_read_feature_bits() &
- (IXP4XX_FEATURE_RESET_NPEA << i))) {
+ val = cpu_ixp4xx_features(rmap);
+
+ if (!(val & (IXP4XX_FEATURE_RESET_NPEA << i))) {
dev_info(dev, "NPE%d at %pR not available\n",
i, res);
continue; /* NPE already disabled or not present */
@@ -700,6 +715,7 @@ static int ixp4xx_npe_probe(struct platform_device *pdev)
npe->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(npe->regs))
return PTR_ERR(npe->regs);
+ npe->rmap = rmap;
if (npe_reset(npe)) {
dev_info(dev, "NPE%d at %pR does not reset\n",
diff --git a/include/linux/soc/ixp4xx/npe.h b/include/linux/soc/ixp4xx/npe.h
index 2a91f465d456..9efeac777da1 100644
--- a/include/linux/soc/ixp4xx/npe.h
+++ b/include/linux/soc/ixp4xx/npe.h
@@ -3,6 +3,7 @@
#define __IXP4XX_NPE_H
#include <linux/kernel.h>
+#include <linux/regmap.h>
extern const char *npe_names[];
@@ -17,6 +18,7 @@ struct npe_regs {
struct npe {
struct npe_regs __iomem *regs;
+ struct regmap *rmap;
int id;
int valid;
};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 08/13] net: ixp4xx_eth: Drop platform data support
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 02/13] ARM: ixp4xx: Delete the Goramo MLR boardfile Linus Walleij
` (13 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij, David S . Miller, Jakub Kicinski, netdev
All IXP4xx platforms are converted to device tree, the platform
data path is no longer used. Drop the code and custom include,
confine the driver in its own file.
Depend on OF and remove ifdefs around this, as we are all probing
from OF now.
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Network maintainers: I'm looking for an ACK to take this
change through ARM SoC along with other changes removing
these accessor functions.
---
drivers/net/ethernet/xscale/Kconfig | 4 +-
drivers/net/ethernet/xscale/ixp4xx_eth.c | 69 +++++++-----------------
include/linux/platform_data/eth_ixp4xx.h | 21 --------
3 files changed, 20 insertions(+), 74 deletions(-)
delete mode 100644 include/linux/platform_data/eth_ixp4xx.h
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index 0e878fa6e322..b33f64c54b0e 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -20,9 +20,9 @@ if NET_VENDOR_XSCALE
config IXP4XX_ETH
tristate "Intel IXP4xx Ethernet support"
- depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+ depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR && OF
select PHYLIB
- select OF_MDIO if OF
+ select OF_MDIO
select NET_PTP_CLASSIFY
help
Say Y here if you want to use built-in Ethernet ports
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index df77a22d1b81..577a24b3ad70 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -30,7 +30,6 @@
#include <linux/of.h>
#include <linux/of_mdio.h>
#include <linux/phy.h>
-#include <linux/platform_data/eth_ixp4xx.h>
#include <linux/platform_device.h>
#include <linux/ptp_classify.h>
#include <linux/slab.h>
@@ -38,6 +37,11 @@
#include <linux/soc/ixp4xx/npe.h>
#include <linux/soc/ixp4xx/qmgr.h>
#include <linux/soc/ixp4xx/cpu.h>
+#include <linux/types.h>
+
+#define IXP4XX_ETH_NPEA 0x00
+#define IXP4XX_ETH_NPEB 0x10
+#define IXP4XX_ETH_NPEC 0x20
#include "ixp46x_ts.h"
@@ -147,6 +151,16 @@ typedef void buffer_t;
#define free_buffer_irq kfree
#endif
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+ u8 phy; /* MII PHY ID, 0 - 31 */
+ u8 rxq; /* configurable, currently 0 - 31 only */
+ u8 txreadyq;
+ u8 hwaddr[6];
+ u8 npe; /* NPE instance used by this interface */
+ bool has_mdio; /* If this instance has an MDIO bus */
+};
+
struct eth_regs {
u32 tx_control[2], __res1[2]; /* 000 */
u32 rx_control[2], __res2[2]; /* 010 */
@@ -1366,7 +1380,6 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-#ifdef CONFIG_OF
static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
{
struct device_node *np = dev->of_node;
@@ -1417,12 +1430,6 @@ static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
return plat;
}
-#else
-static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
-{
- return NULL;
-}
-#endif
static int ixp4xx_eth_probe(struct platform_device *pdev)
{
@@ -1434,49 +1441,9 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
struct port *port;
int err;
- if (np) {
- plat = ixp4xx_of_get_platdata(dev);
- if (!plat)
- return -ENODEV;
- } else {
- plat = dev_get_platdata(dev);
- if (!plat)
- return -ENODEV;
- plat->npe = pdev->id;
- switch (plat->npe) {
- case IXP4XX_ETH_NPEA:
- /* If the MDIO bus is not up yet, defer probe */
- break;
- case IXP4XX_ETH_NPEB:
- /* On all except IXP43x, NPE-B is used for the MDIO bus.
- * If there is no NPE-B in the feature set, bail out,
- * else we have the MDIO bus here.
- */
- if (!cpu_is_ixp43x()) {
- if (!(ixp4xx_read_feature_bits() &
- IXP4XX_FEATURE_NPEB_ETH0))
- return -ENODEV;
- /* Else register the MDIO bus on NPE-B */
- plat->has_mdio = true;
- }
- break;
- case IXP4XX_ETH_NPEC:
- /* IXP43x lacks NPE-B and uses NPE-C for the MDIO bus
- * access, if there is no NPE-C, no bus, nothing works,
- * so bail out.
- */
- if (cpu_is_ixp43x()) {
- if (!(ixp4xx_read_feature_bits() &
- IXP4XX_FEATURE_NPEC_ETH))
- return -ENODEV;
- /* Else register the MDIO bus on NPE-B */
- plat->has_mdio = true;
- }
- break;
- default:
- return -ENODEV;
- }
- }
+ plat = ixp4xx_of_get_platdata(dev);
+ if (!plat)
+ return -ENODEV;
if (!(ndev = devm_alloc_etherdev(dev, sizeof(struct port))))
return -ENOMEM;
diff --git a/include/linux/platform_data/eth_ixp4xx.h b/include/linux/platform_data/eth_ixp4xx.h
deleted file mode 100644
index 114b0940729f..000000000000
--- a/include/linux/platform_data/eth_ixp4xx.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PLATFORM_DATA_ETH_IXP4XX
-#define __PLATFORM_DATA_ETH_IXP4XX
-
-#include <linux/types.h>
-
-#define IXP4XX_ETH_NPEA 0x00
-#define IXP4XX_ETH_NPEB 0x10
-#define IXP4XX_ETH_NPEC 0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
- u8 npe; /* NPE instance used by this interface */
- bool has_mdio; /* If this instance has an MDIO bus */
-};
-
-#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 08/13] net: ixp4xx_eth: Drop platform data support
@ 2022-01-27 0:36 ` Linus Walleij
0 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij, David S . Miller, Jakub Kicinski, netdev
All IXP4xx platforms are converted to device tree, the platform
data path is no longer used. Drop the code and custom include,
confine the driver in its own file.
Depend on OF and remove ifdefs around this, as we are all probing
from OF now.
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Network maintainers: I'm looking for an ACK to take this
change through ARM SoC along with other changes removing
these accessor functions.
---
drivers/net/ethernet/xscale/Kconfig | 4 +-
drivers/net/ethernet/xscale/ixp4xx_eth.c | 69 +++++++-----------------
include/linux/platform_data/eth_ixp4xx.h | 21 --------
3 files changed, 20 insertions(+), 74 deletions(-)
delete mode 100644 include/linux/platform_data/eth_ixp4xx.h
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index 0e878fa6e322..b33f64c54b0e 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -20,9 +20,9 @@ if NET_VENDOR_XSCALE
config IXP4XX_ETH
tristate "Intel IXP4xx Ethernet support"
- depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+ depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR && OF
select PHYLIB
- select OF_MDIO if OF
+ select OF_MDIO
select NET_PTP_CLASSIFY
help
Say Y here if you want to use built-in Ethernet ports
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index df77a22d1b81..577a24b3ad70 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -30,7 +30,6 @@
#include <linux/of.h>
#include <linux/of_mdio.h>
#include <linux/phy.h>
-#include <linux/platform_data/eth_ixp4xx.h>
#include <linux/platform_device.h>
#include <linux/ptp_classify.h>
#include <linux/slab.h>
@@ -38,6 +37,11 @@
#include <linux/soc/ixp4xx/npe.h>
#include <linux/soc/ixp4xx/qmgr.h>
#include <linux/soc/ixp4xx/cpu.h>
+#include <linux/types.h>
+
+#define IXP4XX_ETH_NPEA 0x00
+#define IXP4XX_ETH_NPEB 0x10
+#define IXP4XX_ETH_NPEC 0x20
#include "ixp46x_ts.h"
@@ -147,6 +151,16 @@ typedef void buffer_t;
#define free_buffer_irq kfree
#endif
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+ u8 phy; /* MII PHY ID, 0 - 31 */
+ u8 rxq; /* configurable, currently 0 - 31 only */
+ u8 txreadyq;
+ u8 hwaddr[6];
+ u8 npe; /* NPE instance used by this interface */
+ bool has_mdio; /* If this instance has an MDIO bus */
+};
+
struct eth_regs {
u32 tx_control[2], __res1[2]; /* 000 */
u32 rx_control[2], __res2[2]; /* 010 */
@@ -1366,7 +1380,6 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-#ifdef CONFIG_OF
static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
{
struct device_node *np = dev->of_node;
@@ -1417,12 +1430,6 @@ static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
return plat;
}
-#else
-static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
-{
- return NULL;
-}
-#endif
static int ixp4xx_eth_probe(struct platform_device *pdev)
{
@@ -1434,49 +1441,9 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
struct port *port;
int err;
- if (np) {
- plat = ixp4xx_of_get_platdata(dev);
- if (!plat)
- return -ENODEV;
- } else {
- plat = dev_get_platdata(dev);
- if (!plat)
- return -ENODEV;
- plat->npe = pdev->id;
- switch (plat->npe) {
- case IXP4XX_ETH_NPEA:
- /* If the MDIO bus is not up yet, defer probe */
- break;
- case IXP4XX_ETH_NPEB:
- /* On all except IXP43x, NPE-B is used for the MDIO bus.
- * If there is no NPE-B in the feature set, bail out,
- * else we have the MDIO bus here.
- */
- if (!cpu_is_ixp43x()) {
- if (!(ixp4xx_read_feature_bits() &
- IXP4XX_FEATURE_NPEB_ETH0))
- return -ENODEV;
- /* Else register the MDIO bus on NPE-B */
- plat->has_mdio = true;
- }
- break;
- case IXP4XX_ETH_NPEC:
- /* IXP43x lacks NPE-B and uses NPE-C for the MDIO bus
- * access, if there is no NPE-C, no bus, nothing works,
- * so bail out.
- */
- if (cpu_is_ixp43x()) {
- if (!(ixp4xx_read_feature_bits() &
- IXP4XX_FEATURE_NPEC_ETH))
- return -ENODEV;
- /* Else register the MDIO bus on NPE-B */
- plat->has_mdio = true;
- }
- break;
- default:
- return -ENODEV;
- }
- }
+ plat = ixp4xx_of_get_platdata(dev);
+ if (!plat)
+ return -ENODEV;
if (!(ndev = devm_alloc_etherdev(dev, sizeof(struct port))))
return -ENOMEM;
diff --git a/include/linux/platform_data/eth_ixp4xx.h b/include/linux/platform_data/eth_ixp4xx.h
deleted file mode 100644
index 114b0940729f..000000000000
--- a/include/linux/platform_data/eth_ixp4xx.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PLATFORM_DATA_ETH_IXP4XX
-#define __PLATFORM_DATA_ETH_IXP4XX
-
-#include <linux/types.h>
-
-#define IXP4XX_ETH_NPEA 0x00
-#define IXP4XX_ETH_NPEB 0x10
-#define IXP4XX_ETH_NPEC 0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
- u8 npe; /* NPE instance used by this interface */
- bool has_mdio; /* If this instance has an MDIO bus */
-};
-
-#endif
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 09/13] net: ixp4xx_hss: Check features using syscon
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 02/13] ARM: ixp4xx: Delete the Goramo MLR boardfile Linus Walleij
` (13 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij, David S . Miller, Jakub Kicinski, netdev
If we access the syscon (expansion bus config registers) using the
syscon regmap instead of relying on direct accessor functions,
we do not need to call this static code in the machine
(arch/arm/mach-ixp4xx/common.c) which makes things less dependent
on custom machine-dependent code.
Look up the syscon regmap and handle the error: this will make
deferred probe work with relation to the syscon.
Select the syscon in Kconfig and depend on OF so we know that
all we need will be available.
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Network maintainers: I'm looking for an ACK to take this
change through ARM SoC along with other changes removing
these accessor functions.
---
drivers/net/wan/Kconfig | 3 ++-
drivers/net/wan/ixp4xx_hss.c | 39 ++++++++++++++++++++----------------
2 files changed, 24 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 592a8389fc5a..140780ac1745 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -293,7 +293,8 @@ config SLIC_DS26522
config IXP4XX_HSS
tristate "Intel IXP4xx HSS (synchronous serial port) support"
depends on HDLC && IXP4XX_NPE && IXP4XX_QMGR
- depends on ARCH_IXP4XX
+ depends on ARCH_IXP4XX && OF
+ select MFD_SYSCON
help
Say Y here if you want to use built-in HSS ports
on IXP4xx processor.
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 0b7d9f2f2b8b..863c3e34e136 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -16,8 +16,10 @@
#include <linux/hdlc.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/poll.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
@@ -1389,9 +1391,28 @@ static int ixp4xx_hss_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct net_device *ndev;
struct device_node *np;
+ struct regmap *rmap;
struct port *port;
hdlc_device *hdlc;
int err;
+ u32 val;
+
+ /*
+ * Go into the syscon and check if we have the HSS and HDLC
+ * features available, else this will not work.
+ */
+ rmap = syscon_regmap_lookup_by_compatible("syscon");
+ if (IS_ERR(rmap))
+ return dev_err_probe(dev, PTR_ERR(rmap),
+ "failed to look up syscon\n");
+
+ val = cpu_ixp4xx_features(rmap);
+
+ if ((val & (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) {
+ dev_err(dev, "HDLC and HSS feature unavailable in platform\n");
+ return -ENODEV;
+ }
np = dev->of_node;
@@ -1516,25 +1537,9 @@ static struct platform_driver ixp4xx_hss_driver = {
.probe = ixp4xx_hss_probe,
.remove = ixp4xx_hss_remove,
};
-
-static int __init hss_init_module(void)
-{
- if ((ixp4xx_read_feature_bits() &
- (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
- (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
- return -ENODEV;
-
- return platform_driver_register(&ixp4xx_hss_driver);
-}
-
-static void __exit hss_cleanup_module(void)
-{
- platform_driver_unregister(&ixp4xx_hss_driver);
-}
+module_platform_driver(ixp4xx_hss_driver);
MODULE_AUTHOR("Krzysztof Halasa");
MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:ixp4xx_hss");
-module_init(hss_init_module);
-module_exit(hss_cleanup_module);
--
2.34.1
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 09/13] net: ixp4xx_hss: Check features using syscon
@ 2022-01-27 0:36 ` Linus Walleij
0 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij, David S . Miller, Jakub Kicinski, netdev
If we access the syscon (expansion bus config registers) using the
syscon regmap instead of relying on direct accessor functions,
we do not need to call this static code in the machine
(arch/arm/mach-ixp4xx/common.c) which makes things less dependent
on custom machine-dependent code.
Look up the syscon regmap and handle the error: this will make
deferred probe work with relation to the syscon.
Select the syscon in Kconfig and depend on OF so we know that
all we need will be available.
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Network maintainers: I'm looking for an ACK to take this
change through ARM SoC along with other changes removing
these accessor functions.
---
drivers/net/wan/Kconfig | 3 ++-
drivers/net/wan/ixp4xx_hss.c | 39 ++++++++++++++++++++----------------
2 files changed, 24 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 592a8389fc5a..140780ac1745 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -293,7 +293,8 @@ config SLIC_DS26522
config IXP4XX_HSS
tristate "Intel IXP4xx HSS (synchronous serial port) support"
depends on HDLC && IXP4XX_NPE && IXP4XX_QMGR
- depends on ARCH_IXP4XX
+ depends on ARCH_IXP4XX && OF
+ select MFD_SYSCON
help
Say Y here if you want to use built-in HSS ports
on IXP4xx processor.
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 0b7d9f2f2b8b..863c3e34e136 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -16,8 +16,10 @@
#include <linux/hdlc.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/poll.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
@@ -1389,9 +1391,28 @@ static int ixp4xx_hss_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct net_device *ndev;
struct device_node *np;
+ struct regmap *rmap;
struct port *port;
hdlc_device *hdlc;
int err;
+ u32 val;
+
+ /*
+ * Go into the syscon and check if we have the HSS and HDLC
+ * features available, else this will not work.
+ */
+ rmap = syscon_regmap_lookup_by_compatible("syscon");
+ if (IS_ERR(rmap))
+ return dev_err_probe(dev, PTR_ERR(rmap),
+ "failed to look up syscon\n");
+
+ val = cpu_ixp4xx_features(rmap);
+
+ if ((val & (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) {
+ dev_err(dev, "HDLC and HSS feature unavailable in platform\n");
+ return -ENODEV;
+ }
np = dev->of_node;
@@ -1516,25 +1537,9 @@ static struct platform_driver ixp4xx_hss_driver = {
.probe = ixp4xx_hss_probe,
.remove = ixp4xx_hss_remove,
};
-
-static int __init hss_init_module(void)
-{
- if ((ixp4xx_read_feature_bits() &
- (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
- (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
- return -ENODEV;
-
- return platform_driver_register(&ixp4xx_hss_driver);
-}
-
-static void __exit hss_cleanup_module(void)
-{
- platform_driver_unregister(&ixp4xx_hss_driver);
-}
+module_platform_driver(ixp4xx_hss_driver);
MODULE_AUTHOR("Krzysztof Halasa");
MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:ixp4xx_hss");
-module_init(hss_init_module);
-module_exit(hss_cleanup_module);
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 10/13] ARM: ixp4xx: Remove feature bit accessors
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
` (8 preceding siblings ...)
2022-01-27 0:36 ` Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 11/13] ARM: ixp4xx: Drop custom DMA coherency and bouncing Linus Walleij
` (4 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
We switched users of the accessors over to using syscon to inspect
the bits, or removed the need for checking them. Delete these
accessors.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ixp4xx/common.c | 21 ---------------------
include/linux/soc/ixp4xx/cpu.h | 10 ----------
2 files changed, 31 deletions(-)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 5192cf621f5b..4e51514ace6d 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -43,27 +43,6 @@
#include "irqs.h"
-u32 ixp4xx_read_feature_bits(void)
-{
- u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
-
- if (cpu_is_ixp42x_rev_a0())
- return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
- IXP4XX_FEATURE_AES);
- if (cpu_is_ixp42x())
- return val & IXP42X_FEATURE_MASK;
- if (cpu_is_ixp43x())
- return val & IXP43X_FEATURE_MASK;
- return val & IXP46X_FEATURE_MASK;
-}
-EXPORT_SYMBOL(ixp4xx_read_feature_bits);
-
-void ixp4xx_write_feature_bits(u32 value)
-{
- __raw_writel(~value, IXP4XX_EXP_CFG2);
-}
-EXPORT_SYMBOL(ixp4xx_write_feature_bits);
-
#define IXP4XX_TIMER_FREQ 66666000
/*************************************************************************
diff --git a/include/linux/soc/ixp4xx/cpu.h b/include/linux/soc/ixp4xx/cpu.h
index 48c2e241ac83..f526ac33afea 100644
--- a/include/linux/soc/ixp4xx/cpu.h
+++ b/include/linux/soc/ixp4xx/cpu.h
@@ -90,9 +90,6 @@
IXP43X_PROCESSOR_ID_VALUE)
#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
IXP46X_PROCESSOR_ID_VALUE)
-
-u32 ixp4xx_read_feature_bits(void);
-void ixp4xx_write_feature_bits(u32 value);
static inline u32 cpu_ixp4xx_features(struct regmap *rmap)
{
u32 val;
@@ -114,13 +111,6 @@ static inline u32 cpu_ixp4xx_features(struct regmap *rmap)
#define cpu_is_ixp42x() 0
#define cpu_is_ixp43x() 0
#define cpu_is_ixp46x() 0
-static inline u32 ixp4xx_read_feature_bits(void)
-{
- return 0;
-}
-static inline void ixp4xx_write_feature_bits(u32 value)
-{
-}
static inline u32 cpu_ixp4xx_features(struct regmap *rmap)
{
return 0;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 11/13] ARM: ixp4xx: Drop custom DMA coherency and bouncing
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
` (9 preceding siblings ...)
2022-01-27 0:36 ` [PATCH 10/13] ARM: ixp4xx: Remove feature bit accessors Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 6:38 ` Christoph Hellwig
2022-01-27 10:00 ` Arnd Bergmann
2022-01-27 0:36 ` [PATCH 12/13] ARM: ixp4xx: Drop all common code Linus Walleij
` (3 subsequent siblings)
14 siblings, 2 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
The new PCI driver does not need any of this stuff, so just
drop it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/Kconfig | 5 ---
arch/arm/mach-ixp4xx/common.c | 57 -----------------------------------
kernel/dma/mapping.c | 2 --
3 files changed, 64 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3a95203236d2..ec0dbaf73a81 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -217,9 +217,6 @@ config ARCH_MAY_HAVE_PC_FDC
config ARCH_SUPPORTS_UPROBES
def_bool y
-config ARCH_HAS_DMA_SET_COHERENT_MASK
- bool
-
config GENERIC_ISA_DMA
bool
@@ -381,10 +378,8 @@ config ARCH_IOP32X
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
- select ARCH_HAS_DMA_SET_COHERENT_MASK
select ARCH_SUPPORTS_BIG_ENDIAN
select CPU_XSCALE
- select DMABOUNCE if PCI
select GENERIC_IRQ_MULTI_HANDLER
select GPIO_IXP4XX
select GPIOLIB
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 4e51514ace6d..310e1602fbfc 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -30,7 +30,6 @@
#include <linux/soc/ixp4xx/cpu.h>
#include <linux/irqchip/irq-ixp4xx.h>
#include <linux/platform_data/timer-ixp4xx.h>
-#include <linux/dma-map-ops.h>
#include <mach/hardware.h>
#include <linux/uaccess.h>
#include <asm/page.h>
@@ -330,59 +329,3 @@ void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
}
}
-
-#ifdef CONFIG_PCI
-static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
- return (dma_addr + size) > SZ_64M;
-}
-
-static int ixp4xx_platform_notify_remove(struct device *dev)
-{
- if (dev_is_pci(dev))
- dmabounce_unregister_dev(dev);
-
- return 0;
-}
-#endif
-
-/*
- * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things.
- */
-static int ixp4xx_platform_notify(struct device *dev)
-{
- dev->dma_mask = &dev->coherent_dma_mask;
-
-#ifdef CONFIG_PCI
- if (dev_is_pci(dev)) {
- dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */
- dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
- return 0;
- }
-#endif
-
- dev->coherent_dma_mask = DMA_BIT_MASK(32);
- return 0;
-}
-
-int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
- if (dev_is_pci(dev))
- mask &= DMA_BIT_MASK(28); /* 64 MB */
-
- if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) {
- dev->coherent_dma_mask = mask;
- return 0;
- }
-
- return -EIO; /* device wanted sub-64MB mask */
-}
-EXPORT_SYMBOL(dma_set_coherent_mask);
-
-void __init ixp4xx_init_early(void)
-{
- platform_notify = ixp4xx_platform_notify;
-#ifdef CONFIG_PCI
- platform_notify_remove = ixp4xx_platform_notify_remove;
-#endif
-}
diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c
index 9478eccd1c8e..559461a826ba 100644
--- a/kernel/dma/mapping.c
+++ b/kernel/dma/mapping.c
@@ -745,7 +745,6 @@ int dma_set_mask(struct device *dev, u64 mask)
}
EXPORT_SYMBOL(dma_set_mask);
-#ifndef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK
int dma_set_coherent_mask(struct device *dev, u64 mask)
{
/*
@@ -761,7 +760,6 @@ int dma_set_coherent_mask(struct device *dev, u64 mask)
return 0;
}
EXPORT_SYMBOL(dma_set_coherent_mask);
-#endif
size_t dma_max_mapping_size(struct device *dev)
{
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 12/13] ARM: ixp4xx: Drop all common code
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
` (10 preceding siblings ...)
2022-01-27 0:36 ` [PATCH 11/13] ARM: ixp4xx: Drop custom DMA coherency and bouncing Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 13/13] ARM: ixp4xx: Convert to SPARSE_IRQ and P2V Linus Walleij
` (2 subsequent siblings)
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
After moving away from all the code we depend on in common we can
get a clean device tree boot and delete the common code in
arch/arm/mach-ixp4xx/common.c altogether.
Two physical register addresses remain in use, just copy these
verbatim into uncompress.h.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ixp4xx/Makefile | 2 +-
arch/arm/mach-ixp4xx/common.c | 331 ------------------
arch/arm/mach-ixp4xx/include/mach/hardware.h | 26 --
.../mach-ixp4xx/include/mach/ixp4xx-regs.h | 303 ----------------
arch/arm/mach-ixp4xx/include/mach/platform.h | 98 ------
.../arm/mach-ixp4xx/include/mach/uncompress.h | 4 +-
arch/arm/mach-ixp4xx/irqs.h | 64 ----
drivers/crypto/ixp4xx_crypto.c | 1 -
drivers/net/ethernet/xscale/ptp_ixp46x.c | 1 -
9 files changed, 4 insertions(+), 826 deletions(-)
delete mode 100644 arch/arm/mach-ixp4xx/common.c
delete mode 100644 arch/arm/mach-ixp4xx/include/mach/hardware.h
delete mode 100644 arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
delete mode 100644 arch/arm/mach-ixp4xx/include/mach/platform.h
delete mode 100644 arch/arm/mach-ixp4xx/irqs.h
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 4ebe35227bf6..3d1c9d854c7f 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -1,2 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
-obj-y += ixp4xx-of.o common.o
+obj-y += ixp4xx-of.o
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
deleted file mode 100644
index 310e1602fbfc..000000000000
--- a/arch/arm/mach-ixp4xx/common.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/common.c
- *
- * Generic code shared across all IXP4XX platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 (c) Intel Corporation
- * Copyright 2003-2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/cpu.h>
-#include <linux/pci.h>
-#include <linux/sched_clock.h>
-#include <linux/soc/ixp4xx/cpu.h>
-#include <linux/irqchip/irq-ixp4xx.h>
-#include <linux/platform_data/timer-ixp4xx.h>
-#include <mach/hardware.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/exception.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "irqs.h"
-
-#define IXP4XX_TIMER_FREQ 66666000
-
-/*************************************************************************
- * IXP4xx chipset I/O mapping
- *************************************************************************/
-static struct map_desc ixp4xx_io_desc[] __initdata = {
- { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
- .virtual = (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
- .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
- .length = IXP4XX_PERIPHERAL_REGION_SIZE,
- .type = MT_DEVICE
- }, { /* Expansion Bus Config Registers */
- .virtual = (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
- .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
- .length = IXP4XX_EXP_CFG_REGION_SIZE,
- .type = MT_DEVICE
- }, { /* PCI Registers */
- .virtual = (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
- .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
- .length = IXP4XX_PCI_CFG_REGION_SIZE,
- .type = MT_DEVICE
- },
-};
-
-void __init ixp4xx_map_io(void)
-{
- iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
-}
-
-void __init ixp4xx_init_irq(void)
-{
- /*
- * ixp4xx does not implement the XScale PWRMODE register
- * so it must not call cpu_do_idle().
- */
- cpu_idle_poll_ctrl(true);
-
- ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS,
- (cpu_is_ixp46x() || cpu_is_ixp43x()));
-}
-
-void __init ixp4xx_timer_init(void)
-{
- return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS,
- IRQ_IXP4XX_TIMER1,
- IXP4XX_TIMER_FREQ);
-}
-
-static struct resource ixp4xx_udc_resources[] = {
- [0] = {
- .start = 0xc800b000,
- .end = 0xc800bfff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IXP4XX_USB,
- .end = IRQ_IXP4XX_USB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource ixp4xx_gpio_resource[] = {
- {
- .start = IXP4XX_GPIO_BASE_PHYS,
- .end = IXP4XX_GPIO_BASE_PHYS + 0xfff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ixp4xx_gpio_device = {
- .name = "ixp4xx-gpio",
- .id = -1,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ixp4xx_gpio_resource,
- .num_resources = ARRAY_SIZE(ixp4xx_gpio_resource),
-};
-
-/*
- * USB device controller. The IXP4xx uses the same controller as PXA25X,
- * so we just use the same device.
- */
-static struct platform_device ixp4xx_udc_device = {
- .name = "pxa25x-udc",
- .id = -1,
- .num_resources = 2,
- .resource = ixp4xx_udc_resources,
-};
-
-static struct resource ixp4xx_npe_resources[] = {
- {
- .start = IXP4XX_NPEA_BASE_PHYS,
- .end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IXP4XX_NPEB_BASE_PHYS,
- .end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IXP4XX_NPEC_BASE_PHYS,
- .end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
- .flags = IORESOURCE_MEM,
- },
-
-};
-
-static struct platform_device ixp4xx_npe_device = {
- .name = "ixp4xx-npe",
- .id = -1,
- .num_resources = ARRAY_SIZE(ixp4xx_npe_resources),
- .resource = ixp4xx_npe_resources,
-};
-
-static struct resource ixp4xx_qmgr_resources[] = {
- {
- .start = IXP4XX_QMGR_BASE_PHYS,
- .end = IXP4XX_QMGR_BASE_PHYS + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_IXP4XX_QM1,
- .end = IRQ_IXP4XX_QM1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = IRQ_IXP4XX_QM2,
- .end = IRQ_IXP4XX_QM2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ixp4xx_qmgr_device = {
- .name = "ixp4xx-qmgr",
- .id = -1,
- .num_resources = ARRAY_SIZE(ixp4xx_qmgr_resources),
- .resource = ixp4xx_qmgr_resources,
-};
-
-static struct platform_device *ixp4xx_devices[] __initdata = {
- &ixp4xx_npe_device,
- &ixp4xx_qmgr_device,
- &ixp4xx_gpio_device,
- &ixp4xx_udc_device,
-};
-
-static struct resource ixp46x_i2c_resources[] = {
- [0] = {
- .start = 0xc8011000,
- .end = 0xc801101c,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IXP4XX_I2C,
- .end = IRQ_IXP4XX_I2C,
- .flags = IORESOURCE_IRQ
- }
-};
-
-/* A single 32-bit register on IXP46x */
-#define IXP4XX_HWRANDOM_BASE_PHYS 0x70002100
-
-static struct resource ixp46x_hwrandom_resource[] = {
- {
- .start = IXP4XX_HWRANDOM_BASE_PHYS,
- .end = IXP4XX_HWRANDOM_BASE_PHYS + 0x3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ixp46x_hwrandom_device = {
- .name = "ixp4xx-hwrandom",
- .id = -1,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ixp46x_hwrandom_resource,
- .num_resources = ARRAY_SIZE(ixp46x_hwrandom_resource),
-};
-
-/*
- * I2C controller. The IXP46x uses the same block as the IOP3xx, so
- * we just use the same device name.
- */
-static struct platform_device ixp46x_i2c_controller = {
- .name = "IOP3xx-I2C",
- .id = 0,
- .num_resources = 2,
- .resource = ixp46x_i2c_resources
-};
-
-static struct resource ixp46x_ptp_resources[] = {
- DEFINE_RES_MEM(IXP4XX_TIMESYNC_BASE_PHYS, SZ_4K),
- DEFINE_RES_IRQ_NAMED(IRQ_IXP4XX_GPIO8, "master"),
- DEFINE_RES_IRQ_NAMED(IRQ_IXP4XX_GPIO7, "slave"),
-};
-
-static struct platform_device ixp46x_ptp = {
- .name = "ptp-ixp46x",
- .id = -1,
- .resource = ixp46x_ptp_resources,
- .num_resources = ARRAY_SIZE(ixp46x_ptp_resources),
-};
-
-static struct platform_device *ixp46x_devices[] __initdata = {
- &ixp46x_hwrandom_device,
- &ixp46x_i2c_controller,
- &ixp46x_ptp,
-};
-
-unsigned long ixp4xx_exp_bus_size;
-EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-static struct platform_device_info ixp_dev_info __initdata = {
- .name = "ixp4xx_crypto",
- .id = 0,
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-static int __init ixp_crypto_register(void)
-{
- struct platform_device *pdev;
-
- if (!(~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH |
- IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) {
- printk(KERN_ERR "ixp_crypto: No HW crypto available\n");
- return -ENODEV;
- }
-
- pdev = platform_device_register_full(&ixp_dev_info);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- return 0;
-}
-
-void __init ixp4xx_sys_init(void)
-{
- ixp4xx_exp_bus_size = SZ_16M;
-
- platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
-
- if (IS_ENABLED(CONFIG_CRYPTO_DEV_IXP4XX))
- ixp_crypto_register();
-
- if (cpu_is_ixp46x()) {
- int region;
-
- platform_add_devices(ixp46x_devices,
- ARRAY_SIZE(ixp46x_devices));
-
- for (region = 0; region < 7; region++) {
- if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
- ixp4xx_exp_bus_size = SZ_32M;
- break;
- }
- }
- }
-
- printk("IXP4xx: Using %luMiB expansion bus window size\n",
- ixp4xx_exp_bus_size >> 20);
-}
-
-unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
-EXPORT_SYMBOL(ixp4xx_timer_freq);
-
-void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode == REBOOT_SOFT) {
- /* Jump into ROM at address 0 */
- soft_restart(0);
- } else {
- /* Use on-chip reset capability */
-
- /* set the "key" register to enable access to
- * "timer" and "enable" registers
- */
- *IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
- /* write 0 to the timer register for an immediate reset */
- *IXP4XX_OSWT = 0;
-
- *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
- }
-}
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
deleted file mode 100644
index 41f28fb8e63f..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/hardware.h
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-/*
- * Hardware definitions for IXP4xx based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-/* Register locations and bits */
-#include "ixp4xx-regs.h"
-
-#ifndef __ASSEMBLER__
-#include <linux/soc/ixp4xx/cpu.h>
-#endif
-
-/* Platform helper functions and definitions */
-#include "platform.h"
-
-#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
deleted file mode 100644
index 74e63d4531aa..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
- *
- * Register definitions for IXP4xx chipset. This file contains
- * register location and bit definitions only. Platform specific
- * definitions and helper function declarations are in platform.h
- * and machine-name.h.
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#ifndef _ASM_ARM_IXP4XX_H_
-#define _ASM_ARM_IXP4XX_H_
-
-/*
- * IXP4xx Linux Memory Map:
- *
- * Phy Size Virt Description
- * =========================================================================
- *
- * 0x00000000 0x10000000(max) PAGE_OFFSET System RAM
- *
- * 0x48000000 0x04000000 ioremap'd PCI Memory Space
- *
- * 0x50000000 0x10000000 ioremap'd EXP BUS
- *
- * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals
- *
- * 0xC0000000 0x00001000 0xFEF13000 PCI CFG
- *
- * 0xC4000000 0x00001000 0xFEF14000 EXP CFG
- *
- * 0x60000000 0x00004000 0xFEF15000 QMgr
- */
-
-/*
- * Queue Manager
- */
-#define IXP4XX_QMGR_BASE_PHYS 0x60000000
-
-/*
- * Peripheral space, including debug UART. Must be section-aligned so that
- * it can be used with the low-level debug code.
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000
-#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEC00000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000
-
-/*
- * PCI Config registers
- */
-#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000
-#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEC13000)
-#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEC14000
-#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000
-
-#define IXP4XX_EXP_CS0_OFFSET 0x00
-#define IXP4XX_EXP_CS1_OFFSET 0x04
-#define IXP4XX_EXP_CS2_OFFSET 0x08
-#define IXP4XX_EXP_CS3_OFFSET 0x0C
-#define IXP4XX_EXP_CS4_OFFSET 0x10
-#define IXP4XX_EXP_CS5_OFFSET 0x14
-#define IXP4XX_EXP_CS6_OFFSET 0x18
-#define IXP4XX_EXP_CS7_OFFSET 0x1C
-#define IXP4XX_EXP_CFG0_OFFSET 0x20
-#define IXP4XX_EXP_CFG1_OFFSET 0x24
-#define IXP4XX_EXP_CFG2_OFFSET 0x28
-#define IXP4XX_EXP_CFG3_OFFSET 0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
-
-#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
-#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
-#define IXP4XX_EXP_CS2 IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET)
-#define IXP4XX_EXP_CS3 IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
-#define IXP4XX_EXP_CS4 IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
-#define IXP4XX_EXP_CS5 IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
-#define IXP4XX_EXP_CS6 IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)
-#define IXP4XX_EXP_CS7 IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
-
-#define IXP4XX_EXP_CFG0 IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET)
-#define IXP4XX_EXP_CFG1 IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET)
-#define IXP4XX_EXP_CFG2 IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET)
-#define IXP4XX_EXP_CFG3 IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
-
-
-/*
- * Peripheral Space Register Region Base Addresses
- */
-#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
-#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
-#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
-#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
-#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
-#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
-
-
-/* The UART is explicitly put in the beginning of fixmap */
-#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
-#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
-#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
-#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
-#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
-#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
-#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
-#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
-#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
-#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
-#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
-#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */
-#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */
-#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */
-#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */
-#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */
-#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */
-#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */
-#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */
-#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
-
-#define IXP4XX_OSTS IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
-#define IXP4XX_OST1 IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
-#define IXP4XX_OSRT1 IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
-#define IXP4XX_OST2 IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
-#define IXP4XX_OSRT2 IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
-#define IXP4XX_OSWT IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
-#define IXP4XX_OSWE IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
-#define IXP4XX_OSWK IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
-#define IXP4XX_OSST IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions
- */
-#define IXP4XX_OST_ENABLE 0x00000001
-#define IXP4XX_OST_ONE_SHOT 0x00000002
-/* Low order bits of reload value ignored */
-#define IXP4XX_OST_RELOAD_MASK 0x00000003
-#define IXP4XX_OST_DISABLED 0x00000000
-#define IXP4XX_OSST_TIMER_1_PEND 0x00000001
-#define IXP4XX_OSST_TIMER_2_PEND 0x00000002
-#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004
-#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008
-#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010
-
-#define IXP4XX_WDT_KEY 0x0000482E
-
-#define IXP4XX_WDT_RESET_ENABLE 0x00000001
-#define IXP4XX_WDT_IRQ_ENABLE 0x00000002
-#define IXP4XX_WDT_COUNT_ENABLE 0x00000004
-
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET 0x00
-#define PCI_NP_CBE_OFFSET 0x04
-#define PCI_NP_WDATA_OFFSET 0x08
-#define PCI_NP_RDATA_OFFSET 0x0c
-#define PCI_CRP_AD_CBE_OFFSET 0x10
-#define PCI_CRP_WDATA_OFFSET 0x14
-#define PCI_CRP_RDATA_OFFSET 0x18
-#define PCI_CSR_OFFSET 0x1c
-#define PCI_ISR_OFFSET 0x20
-#define PCI_INTEN_OFFSET 0x24
-#define PCI_DMACTRL_OFFSET 0x28
-#define PCI_AHBMEMBASE_OFFSET 0x2c
-#define PCI_AHBIOBASE_OFFSET 0x30
-#define PCI_PCIMEMBASE_OFFSET 0x34
-#define PCI_AHBDOORBELL_OFFSET 0x38
-#define PCI_PCIDOORBELL_OFFSET 0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET 0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define _IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
-
-#define PCI_NP_AD _IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE _IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA _IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA _IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE _IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA _IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA _IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR _IXP4XX_PCI_CSR(PCI_CSR_OFFSET)
-#define PCI_ISR _IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN _IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL _IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE _IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE _IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE _IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL _IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL _IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR _IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR _IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR _IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR _IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR _IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR _IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST 0x00000001
-#define PCI_CSR_ARBEN 0x00000002
-#define PCI_CSR_ADS 0x00000004
-#define PCI_CSR_PDS 0x00000008
-#define PCI_CSR_ABE 0x00000010
-#define PCI_CSR_DBT 0x00000020
-#define PCI_CSR_ASE 0x00000100
-#define PCI_CSR_IC 0x00008000
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE 0x00000001
-#define PCI_ISR_PFE 0x00000002
-#define PCI_ISR_PPE 0x00000004
-#define PCI_ISR_AHBE 0x00000008
-#define PCI_ISR_APDC 0x00000010
-#define PCI_ISR_PADC 0x00000020
-#define PCI_ISR_ADB 0x00000040
-#define PCI_ISR_PDB 0x00000080
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE 0x00000001
-#define PCI_INTEN_PFE 0x00000002
-#define PCI_INTEN_PPE 0x00000004
-#define PCI_INTEN_AHBE 0x00000008
-#define PCI_INTEN_APDC 0x00000010
-#define PCI_INTEN_PADC 0x00000020
-#define PCI_INTEN_ADB 0x00000040
-#define PCI_INTEN_PDB 0x00000080
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP4XX_PCI_NP_CBE_BESL 4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD 0x2
-#define NP_CMD_IOWRITE 0x3
-#define NP_CMD_CONFIGREAD 0xa
-#define NP_CMD_CONFIGWRITE 0xb
-#define NP_CMD_MEMREAD 0x6
-#define NP_CMD_MEMWRITE 0x7
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL 20
-#define CRP_AD_CBE_WRITE 0x00010000
-
-#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
deleted file mode 100644
index f9ec07f00be0..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ixp4xx/include/mach/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <linux/reboot.h>
-#include <linux/platform_data/eth_ixp4xx.h>
-
-#include <asm/types.h>
-
-#ifndef __ARMEB__
-#define REG_OFFSET 0
-#else
-#define REG_OFFSET 3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define IXP4XX_EXP_BUS_BASE(region)\
- (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
- (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN (1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN (1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN (1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02
-
-#define IXP4XX_FLASH_WRITABLE (0x2)
-#define IXP4XX_FLASH_DEFAULT (0xbcd23c40)
-#define IXP4XX_FLASH_WRITE (0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66MHzi APB BUS */
-#define IXP4XX_UART_XTAL 14745600
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_early(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern void ixp4xx_restart(enum reboot_mode, const char *);
-
-#endif // __ASSEMBLY__
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index 9e08b270cfc7..09e7663e6a55 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -9,10 +9,12 @@
#ifndef _ARCH_UNCOMPRESS_H_
#define _ARCH_UNCOMPRESS_H_
-#include "ixp4xx-regs.h"
#include <asm/mach-types.h>
#include <linux/serial_reg.h>
+#define IXP4XX_UART1_BASE_PHYS 0xc8000000
+#define IXP4XX_UART2_BASE_PHYS 0xc8001000
+
#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
volatile u32* uart_base;
diff --git a/arch/arm/mach-ixp4xx/irqs.h b/arch/arm/mach-ixp4xx/irqs.h
deleted file mode 100644
index a3e8d6408c56..000000000000
--- a/arch/arm/mach-ixp4xx/irqs.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/irqs.h
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-#define IRQ_IXP4XX_BASE 16
-
-#define IRQ_IXP4XX_NPEA (IRQ_IXP4XX_BASE + 0)
-#define IRQ_IXP4XX_NPEB (IRQ_IXP4XX_BASE + 1)
-#define IRQ_IXP4XX_NPEC (IRQ_IXP4XX_BASE + 2)
-#define IRQ_IXP4XX_QM1 (IRQ_IXP4XX_BASE + 3)
-#define IRQ_IXP4XX_QM2 (IRQ_IXP4XX_BASE + 4)
-#define IRQ_IXP4XX_TIMER1 (IRQ_IXP4XX_BASE + 5)
-#define IRQ_IXP4XX_GPIO0 (IRQ_IXP4XX_BASE + 6)
-#define IRQ_IXP4XX_GPIO1 (IRQ_IXP4XX_BASE + 7)
-#define IRQ_IXP4XX_PCI_INT (IRQ_IXP4XX_BASE + 8)
-#define IRQ_IXP4XX_PCI_DMA1 (IRQ_IXP4XX_BASE + 9)
-#define IRQ_IXP4XX_PCI_DMA2 (IRQ_IXP4XX_BASE + 10)
-#define IRQ_IXP4XX_TIMER2 (IRQ_IXP4XX_BASE + 11)
-#define IRQ_IXP4XX_USB (IRQ_IXP4XX_BASE + 12)
-#define IRQ_IXP4XX_UART2 (IRQ_IXP4XX_BASE + 13)
-#define IRQ_IXP4XX_TIMESTAMP (IRQ_IXP4XX_BASE + 14)
-#define IRQ_IXP4XX_UART1 (IRQ_IXP4XX_BASE + 15)
-#define IRQ_IXP4XX_WDOG (IRQ_IXP4XX_BASE + 16)
-#define IRQ_IXP4XX_AHB_PMU (IRQ_IXP4XX_BASE + 17)
-#define IRQ_IXP4XX_XSCALE_PMU (IRQ_IXP4XX_BASE + 18)
-#define IRQ_IXP4XX_GPIO2 (IRQ_IXP4XX_BASE + 19)
-#define IRQ_IXP4XX_GPIO3 (IRQ_IXP4XX_BASE + 20)
-#define IRQ_IXP4XX_GPIO4 (IRQ_IXP4XX_BASE + 21)
-#define IRQ_IXP4XX_GPIO5 (IRQ_IXP4XX_BASE + 22)
-#define IRQ_IXP4XX_GPIO6 (IRQ_IXP4XX_BASE + 23)
-#define IRQ_IXP4XX_GPIO7 (IRQ_IXP4XX_BASE + 24)
-#define IRQ_IXP4XX_GPIO8 (IRQ_IXP4XX_BASE + 25)
-#define IRQ_IXP4XX_GPIO9 (IRQ_IXP4XX_BASE + 26)
-#define IRQ_IXP4XX_GPIO10 (IRQ_IXP4XX_BASE + 27)
-#define IRQ_IXP4XX_GPIO11 (IRQ_IXP4XX_BASE + 28)
-#define IRQ_IXP4XX_GPIO12 (IRQ_IXP4XX_BASE + 29)
-#define IRQ_IXP4XX_SW_INT1 (IRQ_IXP4XX_BASE + 30)
-#define IRQ_IXP4XX_SW_INT2 (IRQ_IXP4XX_BASE + 31)
-#define IRQ_IXP4XX_USB_HOST (IRQ_IXP4XX_BASE + 32)
-#define IRQ_IXP4XX_I2C (IRQ_IXP4XX_BASE + 33)
-#define IRQ_IXP4XX_SSP (IRQ_IXP4XX_BASE + 34)
-#define IRQ_IXP4XX_TSYNC (IRQ_IXP4XX_BASE + 35)
-#define IRQ_IXP4XX_EAU_DONE (IRQ_IXP4XX_BASE + 36)
-#define IRQ_IXP4XX_SHA_DONE (IRQ_IXP4XX_BASE + 37)
-#define IRQ_IXP4XX_SWCP_PE (IRQ_IXP4XX_BASE + 58)
-#define IRQ_IXP4XX_QM_PE (IRQ_IXP4XX_BASE + 60)
-#define IRQ_IXP4XX_MCU_ECC (IRQ_IXP4XX_BASE + 61)
-#define IRQ_IXP4XX_EXP_PE (IRQ_IXP4XX_BASE + 62)
-
-#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n)
-#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n)
-
-#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
-
-#endif
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 98730aab287c..d39a386b31ac 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -33,7 +33,6 @@
/* Intermittent includes, delete this after v5.14-rc1 */
#include <linux/soc/ixp4xx/cpu.h>
-#include <mach/ixp4xx-regs.h>
#define MAX_KEYLEN 32
diff --git a/drivers/net/ethernet/xscale/ptp_ixp46x.c b/drivers/net/ethernet/xscale/ptp_ixp46x.c
index 39234852e01b..1f382777aa5a 100644
--- a/drivers/net/ethernet/xscale/ptp_ixp46x.c
+++ b/drivers/net/ethernet/xscale/ptp_ixp46x.c
@@ -16,7 +16,6 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/platform_device.h>
#include <linux/soc/ixp4xx/cpu.h>
-#include <mach/ixp4xx-regs.h>
#include "ixp46x_ts.h"
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 13/13] ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
` (11 preceding siblings ...)
2022-01-27 0:36 ` [PATCH 12/13] ARM: ixp4xx: Drop all common code Linus Walleij
@ 2022-01-27 0:36 ` Linus Walleij
2022-01-27 6:18 ` [PATCH 00/13] IXP4xx spring cleaning Krzysztof Hałasa
2022-01-27 7:55 ` Arnd Bergmann
14 siblings, 0 replies; 23+ messages in thread
From: Linus Walleij @ 2022-01-27 0:36 UTC (permalink / raw)
To: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa
Cc: Arnd Bergmann, Linus Walleij
Turn on sparse IRQs and patch-physical-to-virtual for IXP4xx
as this is required for multiplatform. Drop the PHYS_OFFSET as
we are now using P2V.
Tested and works like a charm on my systems.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/Kconfig | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ec0dbaf73a81..02df28b3ee7e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -263,7 +263,7 @@ config PHYS_OFFSET
hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
- default 0x00000000 if ARCH_FOOTBRIDGE || ARCH_IXP4XX
+ default 0x00000000 if ARCH_FOOTBRIDGE
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x30000000 if ARCH_S3C24XX
default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
@@ -379,6 +379,7 @@ config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
select ARCH_SUPPORTS_BIG_ENDIAN
+ select ARM_PATCH_PHYS_VIRT
select CPU_XSCALE
select GENERIC_IRQ_MULTI_HANDLER
select GPIO_IXP4XX
@@ -386,6 +387,7 @@ config ARCH_IXP4XX
select HAVE_PCI
select IXP4XX_IRQ
select IXP4XX_TIMER
+ select SPARSE_IRQ
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
help
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH 00/13] IXP4xx spring cleaning
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
` (12 preceding siblings ...)
2022-01-27 0:36 ` [PATCH 13/13] ARM: ixp4xx: Convert to SPARSE_IRQ and P2V Linus Walleij
@ 2022-01-27 6:18 ` Krzysztof Hałasa
2022-01-27 7:55 ` Arnd Bergmann
14 siblings, 0 replies; 23+ messages in thread
From: Krzysztof Hałasa @ 2022-01-27 6:18 UTC (permalink / raw)
To: Linus Walleij; +Cc: linux-arm-kernel, Imre Kaloz, Arnd Bergmann
Hi Linus,
Linus Walleij <linus.walleij@linaro.org> writes:
> I think this is because MULTI_V5 turns on CPUs that cannot
> do big endian, and IXP4xx turn on big endian. (It crashes if
> I try to boot in little endian mode, sorry. It really wants
> to run big endian.)
The IXP4xx used to work little-endian, with certain limitations, I guess
it could be easily made to work again.
The limitations were a bit of headache, though. The most problematic was
the network buffers were big-endian and required on-the-fly swapping,
which limited e.g. routing performance (I don't remember the numbers).
Also the crypto operations may have been affected (not sure, perhaps
there was an endianness flag for the crypto coprocessor).
There was a special memory mode where the CPU could swap the buffers in
hardware (it was an MMU page attribute). This special mode wasn't
available on the first CPU revision. I had an experimental, a bit
complicated patch which made use of this feature. This way I was able to
run off-the-shelf little-endian system (like Debian) without the network
performance hit.
IIRC the first CPU revision was used in certain routers (access
servers?) perhaps by US Robotics (3Com?). I had an experimental board
with this early chip as well. Otherwise I think most hardware used the
second revision. The newer chips (IXP43x and 45x/46x) had the feature
from the start, basically I think only the IXP425 rev. A0 (also called
IXC1100 by Intel?) was a problem.
--
Krzysztof "Chris" Hałasa
Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 11/13] ARM: ixp4xx: Drop custom DMA coherency and bouncing
2022-01-27 0:36 ` [PATCH 11/13] ARM: ixp4xx: Drop custom DMA coherency and bouncing Linus Walleij
@ 2022-01-27 6:38 ` Christoph Hellwig
2022-01-27 10:00 ` Arnd Bergmann
1 sibling, 0 replies; 23+ messages in thread
From: Christoph Hellwig @ 2022-01-27 6:38 UTC (permalink / raw)
To: Linus Walleij
Cc: linux-arm-kernel, Imre Kaloz, Krzysztof Halasa, Arnd Bergmann
On Thu, Jan 27, 2022 at 01:36:54AM +0100, Linus Walleij wrote:
> The new PCI driver does not need any of this stuff, so just
> drop it.
Please CC me and the iommu list on changes to kernel/dma/.
But dropping this hooks is awesome, so:
Reviewed-by: Christoph Hellwig <hch@lst.de>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 00/13] IXP4xx spring cleaning
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
` (13 preceding siblings ...)
2022-01-27 6:18 ` [PATCH 00/13] IXP4xx spring cleaning Krzysztof Hałasa
@ 2022-01-27 7:55 ` Arnd Bergmann
2022-01-27 12:17 ` Krzysztof Hałasa
14 siblings, 1 reply; 23+ messages in thread
From: Arnd Bergmann @ 2022-01-27 7:55 UTC (permalink / raw)
To: Linus Walleij; +Cc: Linux ARM, Imre Kaloz, Krzysztof Halasa, Arnd Bergmann
On Thu, Jan 27, 2022 at 1:36 AM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> This cleans out the remaining board files from IXP4xx and
> makes it an exclusive device tree subarchitecture without any
> special weirdness in arch/arm/mach-ixp4xx.
>
> The biggest noticeable change is the removal of the old PCI
> driver and along with that the removal of the special DMA
> coherency code and defines and the DMA bouncing.
Very nice!
> I tried to convert the IXP4xx to multiplatform on top of
> this but it didn't work because IXP4xx wants to be big
> endian and multiplatform config creates a problem like
> this:
>
> ../arch/arm/kernel/head.S: Assembler messages:
> ../arch/arm/kernel/head.S:94: Error: selected processor does not support `setend be' in ARM mode
>
> I think this is because MULTI_V5 turns on CPUs that cannot
> do big endian, and IXP4xx turn on big endian.
The issue appears to be some mixup between BE8 and BE32 mode,
as this instruction only available on ARMv6 and higher with their
moder BE8 mode, while ARMv5 used the old-style BE32 mode that
does not have the setend instruction. I don't know how you got
to a configuration with BE8 mode on ARMv5, but I'm sure this can
be solved.
> (It crashes if I try to boot in little endian mode, sorry. It really
> wants to run big endian.)
My best guess is that this is caused by drivers using the "wrong"
register accessors, it should be possible to fix as well, but
would likely need fixes in a lot of files. I don't know what the
right way to do register accesses on BE8 is any more, but
apparently ixp4xx was working both ways in the past. It would
be nice to be able to run Debian armel user space.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 11/13] ARM: ixp4xx: Drop custom DMA coherency and bouncing
2022-01-27 0:36 ` [PATCH 11/13] ARM: ixp4xx: Drop custom DMA coherency and bouncing Linus Walleij
2022-01-27 6:38 ` Christoph Hellwig
@ 2022-01-27 10:00 ` Arnd Bergmann
2022-01-31 6:54 ` Christoph Hellwig
1 sibling, 1 reply; 23+ messages in thread
From: Arnd Bergmann @ 2022-01-27 10:00 UTC (permalink / raw)
To: Linus Walleij
Cc: Linux ARM, Imre Kaloz, Krzysztof Halasa, Arnd Bergmann,
Russell King - ARM Linux
On Thu, Jan 27, 2022 at 1:36 AM Linus Walleij <linus.walleij@linaro.org> wrote:
> @@ -381,10 +378,8 @@ config ARCH_IOP32X
> config ARCH_IXP4XX
> bool "IXP4xx-based"
> depends on MMU
> - select ARCH_HAS_DMA_SET_COHERENT_MASK
> select ARCH_SUPPORTS_BIG_ENDIAN
> select CPU_XSCALE
> - select DMABOUNCE if PCI
> select GENERIC_IRQ_MULTI_HANDLER
> select GPIO_IXP4XX
> select GPIOLIB
Very nice! AFAICT CONFIG_DMABOUNCE is now only used for the sa1111-ohci
driver on the SA1100 Assabet's neponset add-on -- the other sa1111
based machines
are either not supported by the kernel, or don't need the quirk, while other
devices on sa11111 don't have DMA (ps2, ssp, pcmcia) or no driver (audio).
Maybe we could change the sa1111-ohci driver to use usb_hcd_setup_local_mem(),
which implements a similar method locally, and then kill off dmabounce for good.
usb_hcd_setup_local_mem() is used on some pxa machines (csb726 with ohci-sm501
and eseries/tosa with ohci-tmio), though they use it to DMA into a
small SRAM (8KB
for tmio, 256KB for sm501) rather than a limited section of DRAM.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 00/13] IXP4xx spring cleaning
2022-01-27 7:55 ` Arnd Bergmann
@ 2022-01-27 12:17 ` Krzysztof Hałasa
2022-01-27 13:11 ` Arnd Bergmann
0 siblings, 1 reply; 23+ messages in thread
From: Krzysztof Hałasa @ 2022-01-27 12:17 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: Linus Walleij, Linux ARM, Imre Kaloz
Hi Arnd,
Arnd Bergmann <arnd@arndb.de> writes:
> It would
> be nice to be able to run Debian armel user space.
Exactly.
OTOH we need to remember IXP4xx is a single core, ARMv5, no NEON, no hw
FP, max 256 MB RAM (455/46x - 512 MB RAM IIRC), the clocks are from 266
up to 533/667 MHz IIRC, the PCI limitations and so on.
--
Krzysztof "Chris" Hałasa
Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 00/13] IXP4xx spring cleaning
2022-01-27 12:17 ` Krzysztof Hałasa
@ 2022-01-27 13:11 ` Arnd Bergmann
0 siblings, 0 replies; 23+ messages in thread
From: Arnd Bergmann @ 2022-01-27 13:11 UTC (permalink / raw)
To: Krzysztof Hałasa; +Cc: Arnd Bergmann, Linus Walleij, Linux ARM, Imre Kaloz
On Thu, Jan 27, 2022 at 1:17 PM Krzysztof Hałasa <khalasa@piap.pl> wrote:
> Arnd Bergmann <arnd@arndb.de> writes:
>
> > It would
> > be nice to be able to run Debian armel user space.
>
> Exactly.
>
> OTOH we need to remember IXP4xx is a single core, ARMv5, no NEON, no hw
> FP, max 256 MB RAM (455/46x - 512 MB RAM IIRC), the clocks are from 266
> up to 533/667 MHz IIRC, the PCI limitations and so on.
I think that is fairly typical for hardware that can run Debian armel
user space,
which nowadays means mostly ARM926 based SoCs like sam9 or f1c100s.
While there used to be popular ARMv5 and ARMv6 implementations that are
a bit faster like Kirkwood or IOP13xx, those have mostly been replaced by
ARMv7 or ARMv8 chips in practice, leaving Debian armel for this bottom
end of the scale.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 11/13] ARM: ixp4xx: Drop custom DMA coherency and bouncing
2022-01-27 10:00 ` Arnd Bergmann
@ 2022-01-31 6:54 ` Christoph Hellwig
0 siblings, 0 replies; 23+ messages in thread
From: Christoph Hellwig @ 2022-01-31 6:54 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Linus Walleij, Linux ARM, Imre Kaloz, Krzysztof Halasa,
Russell King - ARM Linux
On Thu, Jan 27, 2022 at 11:00:54AM +0100, Arnd Bergmann wrote:
> Maybe we could change the sa1111-ohci driver to use usb_hcd_setup_local_mem(),
> which implements a similar method locally, and then kill off dmabounce for good.
>
> usb_hcd_setup_local_mem() is used on some pxa machines (csb726 with ohci-sm501
> and eseries/tosa with ohci-tmio), though they use it to DMA into a
> small SRAM (8KB
> for tmio, 256KB for sm501) rather than a limited section of DRAM.
That would be awesome.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2022-01-31 6:56 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-27 0:36 [PATCH 00/13] IXP4xx spring cleaning Linus Walleij
2022-01-27 0:36 ` [PATCH 01/13] ARM: ixp4xx: Delete Gateway 7001 boardfiles Linus Walleij
2022-01-27 0:36 ` [PATCH 02/13] ARM: ixp4xx: Delete the Goramo MLR boardfile Linus Walleij
2022-01-27 0:36 ` [PATCH 03/13] ARM: ixp4xx: Delete old PCI driver Linus Walleij
2022-01-27 0:36 ` [PATCH 04/13] ARM: ixp4xx: Drop stale Kconfig entry Linus Walleij
2022-01-27 0:36 ` [PATCH 05/13] ARM: ixp4xx: Drop UDC info setting function Linus Walleij
2022-01-27 0:36 ` [PATCH 06/13] soc: ixp4xx: Add features from regmap helper Linus Walleij
2022-01-27 0:36 ` [PATCH 07/13] soc: ixp4xx-npe: Access syscon regs using regmap Linus Walleij
2022-01-27 0:36 ` [PATCH 08/13] net: ixp4xx_eth: Drop platform data support Linus Walleij
2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 09/13] net: ixp4xx_hss: Check features using syscon Linus Walleij
2022-01-27 0:36 ` Linus Walleij
2022-01-27 0:36 ` [PATCH 10/13] ARM: ixp4xx: Remove feature bit accessors Linus Walleij
2022-01-27 0:36 ` [PATCH 11/13] ARM: ixp4xx: Drop custom DMA coherency and bouncing Linus Walleij
2022-01-27 6:38 ` Christoph Hellwig
2022-01-27 10:00 ` Arnd Bergmann
2022-01-31 6:54 ` Christoph Hellwig
2022-01-27 0:36 ` [PATCH 12/13] ARM: ixp4xx: Drop all common code Linus Walleij
2022-01-27 0:36 ` [PATCH 13/13] ARM: ixp4xx: Convert to SPARSE_IRQ and P2V Linus Walleij
2022-01-27 6:18 ` [PATCH 00/13] IXP4xx spring cleaning Krzysztof Hałasa
2022-01-27 7:55 ` Arnd Bergmann
2022-01-27 12:17 ` Krzysztof Hałasa
2022-01-27 13:11 ` Arnd Bergmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.