* [PATCH v2 0/2] Enable tsens and thermal for sa8775p SoC
@ 2023-08-24 12:29 Priyansh Jain
2023-08-24 12:30 ` [PATCH v2 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible Priyansh Jain
2023-08-24 12:30 ` [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC Priyansh Jain
0 siblings, 2 replies; 6+ messages in thread
From: Priyansh Jain @ 2023-08-24 12:29 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Amit Kucheria,
Thara Gopinath, Rafael J . Wysocki, Daniel Lezcano, Zhang Rui,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, linux-pm, devicetree, linux-kernel, quic_manafm,
quic_priyjain
Adding compatible string in TSENS dt-bindings, device node
for TSENS controller and Thermal zone support
Changes since v2:
- Indentation mistakes are resolved
- Updated offset of tsens srot region in reg property
- Updated tsens reg property cells properly
Priyansh Jain (2):
dt-bindings: thermal: tsens: Add sa8775p compatible
arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC
.../bindings/thermal/qcom-tsens.yaml | 1 +
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 1096 +++++++++++++++++
2 files changed, 1097 insertions(+)
--
2.17.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible
2023-08-24 12:29 [PATCH v2 0/2] Enable tsens and thermal for sa8775p SoC Priyansh Jain
@ 2023-08-24 12:30 ` Priyansh Jain
2023-08-24 14:23 ` Krzysztof Kozlowski
2023-08-24 12:30 ` [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC Priyansh Jain
1 sibling, 1 reply; 6+ messages in thread
From: Priyansh Jain @ 2023-08-24 12:30 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Amit Kucheria,
Thara Gopinath, Rafael J . Wysocki, Daniel Lezcano, Zhang Rui,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, linux-pm, devicetree, linux-kernel, quic_manafm,
quic_priyjain
Add compatibility string for the thermal sensors on sa8775p platform.
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
---
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 27e9e16e6455..437b74732886 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -51,6 +51,7 @@ properties:
- qcom,msm8996-tsens
- qcom,msm8998-tsens
- qcom,qcm2290-tsens
+ - qcom,sa8775p-tsens
- qcom,sc7180-tsens
- qcom,sc7280-tsens
- qcom,sc8180x-tsens
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC
2023-08-24 12:29 [PATCH v2 0/2] Enable tsens and thermal for sa8775p SoC Priyansh Jain
2023-08-24 12:30 ` [PATCH v2 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible Priyansh Jain
@ 2023-08-24 12:30 ` Priyansh Jain
2023-09-11 8:39 ` Priyansh Jain
2023-09-20 2:36 ` Bjorn Andersson
1 sibling, 2 replies; 6+ messages in thread
From: Priyansh Jain @ 2023-08-24 12:30 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Amit Kucheria,
Thara Gopinath, Rafael J . Wysocki, Daniel Lezcano, Zhang Rui,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, linux-pm, devicetree, linux-kernel, quic_manafm,
quic_priyjain
Add tsens and thermal devicetree node for sa8775p SoC.
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 1096 +++++++++++++++++++++++++
1 file changed, 1096 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index b130136acffe..abba42ea5946 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -2306,6 +2306,1102 @@
#freq-domain-cells = <1>;
};
+
+ tsens0: thermal-sensor@c222000 {
+ compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c263000 0x0 0x1ff>,
+ <0x0 0x0c222000 0x0 0x8>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ #qcom,sensors = <12>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c223000 {
+ compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c265000 0x0 0x1ff>,
+ <0x0 0x0c223000 0x0 0x8>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ #qcom,sensors = <12>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens2: thermal-sensor@c224000 {
+ compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c251000 0x0 0x1ff>,
+ <0x0 0x0c224000 0x0 0x8>;
+ interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+ #qcom,sensors = <13>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens3: thermal-sensor@c225000 {
+ compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c252000 0x0 0x1ff>,
+ <0x0 0x0c225000 0x0 0x8>;
+ interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+ #qcom,sensors = <13>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal_zones: thermal-zones {
+ aoss-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss0_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ aoss0_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-0-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu000_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu000_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-1-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu010_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu010_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-2-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu020_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu020_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-3-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu030_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu030_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ gpuss0_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpuss0_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ gpuss1_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpuss1_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-2-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ gpuss2_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpuss2_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ audio-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ audio_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ audio_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camss-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ camss0_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ camss0_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pcie-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ pcie0_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ pcie0_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss-0-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpuss00_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpuss00_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss1_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ aoss1_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-0-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cpu001_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu001_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-1-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ cpu011_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu011_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-2-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ cpu021_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu021_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-3-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ cpu031_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu031_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-3-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ gpuss3_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpuss3_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-4-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ gpuss4_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpuss4_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-5-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ gpuss5_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpuss5_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ video_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ video_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camss-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ camss1_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ camss1_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pcie-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ pcie1_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ pcie1_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss-0-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 11>;
+
+ trips {
+ cpuss01_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpuss01_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss-2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 0>;
+
+ trips {
+ aoss2_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ aoss2_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-0-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 1>;
+
+ trips {
+ cpu100_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu100_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-1-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 2>;
+
+ trips {
+ cpu110_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu110_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-2-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 3>;
+
+ trips {
+ cpu120_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu120_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-3-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 4>;
+
+ trips {
+ cpu130_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu130_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-0-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 5>;
+
+ trips {
+ nsp000_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp000_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-1-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 6>;
+
+ trips {
+ nsp010_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp010_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-2-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 7>;
+
+ trips {
+ nsp020_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp020_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-0-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 8>;
+
+ trips {
+ nsp100_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp100_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-1-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 9>;
+
+ trips {
+ nsp110_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp110_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-2-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 10>;
+
+ trips {
+ nsp120_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp120_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ ddrss-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 11>;
+
+ trips {
+ ddrss0_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ ddrss0_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss-1-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 12>;
+
+ trips {
+ cpuss10_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpuss10_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss-3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 0>;
+
+ trips {
+ aoss3_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ aoss3_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-0-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 1>;
+
+ trips {
+ cpu101_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu101_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-1-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 2>;
+
+ trips {
+ cpu111_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu111_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-2-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 3>;
+
+ trips {
+ cpu121_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu121_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-3-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 4>;
+
+ trips {
+ cpu131_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpu131_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-0-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 5>;
+
+ trips {
+ nsp001_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp001_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-1-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 6>;
+
+ trips {
+ nsp011_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp011_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-2-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 7>;
+
+ trips {
+ nsp021_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp021_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-0-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 8>;
+
+ trips {
+ nsp101_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp101_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-1-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 9>;
+
+ trips {
+ nsp111_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp111_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-2-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 10>;
+
+ trips {
+ nsp121_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ nsp121_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ ddrss-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 11>;
+
+ trips {
+ ddrss1_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ ddrss1_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss-1-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 12>;
+
+ trips {
+ cpuss11_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cpuss11_alert1: trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+ };
};
arch_timer: timer {
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible
2023-08-24 12:30 ` [PATCH v2 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible Priyansh Jain
@ 2023-08-24 14:23 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2023-08-24 14:23 UTC (permalink / raw)
To: Priyansh Jain, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Amit Kucheria, Thara Gopinath, Rafael J . Wysocki,
Daniel Lezcano, Zhang Rui, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, linux-pm, devicetree, linux-kernel, quic_manafm
On 24/08/2023 14:30, Priyansh Jain wrote:
> Add compatibility string for the thermal sensors on sa8775p platform.
>
> Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
> ---
> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC
2023-08-24 12:30 ` [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC Priyansh Jain
@ 2023-09-11 8:39 ` Priyansh Jain
2023-09-20 2:36 ` Bjorn Andersson
1 sibling, 0 replies; 6+ messages in thread
From: Priyansh Jain @ 2023-09-11 8:39 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Amit Kucheria,
Thara Gopinath, Rafael J . Wysocki, Daniel Lezcano, Zhang Rui,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, linux-pm, devicetree, linux-kernel, quic_manafm
Gentle Reminder.
Addressed the comments from previous v1 patch, Please review the v2 patch.
On 8/24/2023 6:00 PM, Priyansh Jain wrote:
> Add tsens and thermal devicetree node for sa8775p SoC.
>
> Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 1096 +++++++++++++++++++++++++
> 1 file changed, 1096 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index b130136acffe..abba42ea5946 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -2306,6 +2306,1102 @@
>
> #freq-domain-cells = <1>;
> };
> +
> + tsens0: thermal-sensor@c222000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c263000 0x0 0x1ff>,
> + <0x0 0x0c222000 0x0 0x8>;
> + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <12>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens1: thermal-sensor@c223000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c265000 0x0 0x1ff>,
> + <0x0 0x0c223000 0x0 0x8>;
> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <12>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens2: thermal-sensor@c224000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c251000 0x0 0x1ff>,
> + <0x0 0x0c224000 0x0 0x8>;
> + interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <13>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens3: thermal-sensor@c225000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c252000 0x0 0x1ff>,
> + <0x0 0x0c225000 0x0 0x8>;
> + interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <13>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + thermal_zones: thermal-zones {
> + aoss-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 0>;
> +
> + trips {
> + aoss0_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + aoss0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-0-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 1>;
> +
> + trips {
> + cpu000_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu000_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-1-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 2>;
> +
> + trips {
> + cpu010_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu010_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-2-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 3>;
> +
> + trips {
> + cpu020_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu020_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-3-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 4>;
> +
> + trips {
> + cpu030_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu030_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 5>;
> +
> + trips {
> + gpuss0_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 6>;
> +
> + trips {
> + gpuss1_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss1_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-2-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 7>;
> +
> + trips {
> + gpuss2_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss2_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + audio-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 8>;
> +
> + trips {
> + audio_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + audio_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + camss-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 9>;
> +
> + trips {
> + camss0_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + camss0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + pcie-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 10>;
> +
> + trips {
> + pcie0_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + pcie0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpuss-0-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 11>;
> +
> + trips {
> + cpuss00_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpuss00_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + aoss-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 0>;
> +
> + trips {
> + aoss1_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + aoss1_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-0-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 1>;
> +
> + trips {
> + cpu001_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu001_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-1-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 2>;
> +
> + trips {
> + cpu011_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu011_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-2-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 3>;
> +
> + trips {
> + cpu021_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu021_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-3-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 4>;
> +
> + trips {
> + cpu031_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu031_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-3-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 5>;
> +
> + trips {
> + gpuss3_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss3_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-4-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 6>;
> +
> + trips {
> + gpuss4_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss4_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-5-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 7>;
> +
> + trips {
> + gpuss5_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss5_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + video-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 8>;
> +
> + trips {
> + video_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + video_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + camss-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 9>;
> +
> + trips {
> + camss1_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + camss1_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + pcie-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 10>;
> +
> + trips {
> + pcie1_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + pcie1_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpuss-0-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 11>;
> +
> + trips {
> + cpuss01_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpuss01_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + aoss-2-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 0>;
> +
> + trips {
> + aoss2_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + aoss2_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-0-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 1>;
> +
> + trips {
> + cpu100_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu100_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-1-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 2>;
> +
> + trips {
> + cpu110_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu110_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-2-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 3>;
> +
> + trips {
> + cpu120_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu120_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-3-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 4>;
> +
> + trips {
> + cpu130_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu130_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-0-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 5>;
> +
> + trips {
> + nsp000_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp000_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-1-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 6>;
> +
> + trips {
> + nsp010_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp010_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-2-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 7>;
> +
> + trips {
> + nsp020_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp020_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-0-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 8>;
> +
> + trips {
> + nsp100_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp100_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-1-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 9>;
> +
> + trips {
> + nsp110_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp110_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-2-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 10>;
> +
> + trips {
> + nsp120_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp120_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + ddrss-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 11>;
> +
> + trips {
> + ddrss0_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + ddrss0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpuss-1-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 12>;
> +
> + trips {
> + cpuss10_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpuss10_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + aoss-3-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 0>;
> +
> + trips {
> + aoss3_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + aoss3_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-0-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 1>;
> +
> + trips {
> + cpu101_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu101_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-1-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 2>;
> +
> + trips {
> + cpu111_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu111_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-2-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 3>;
> +
> + trips {
> + cpu121_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu121_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-3-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 4>;
> +
> + trips {
> + cpu131_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu131_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-0-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 5>;
> +
> + trips {
> + nsp001_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp001_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-1-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 6>;
> +
> + trips {
> + nsp011_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp011_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-2-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 7>;
> +
> + trips {
> + nsp021_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp021_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-0-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 8>;
> +
> + trips {
> + nsp101_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp101_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-1-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 9>;
> +
> + trips {
> + nsp111_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp111_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-2-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 10>;
> +
> + trips {
> + nsp121_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp121_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + ddrss-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 11>;
> +
> + trips {
> + ddrss1_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + ddrss1_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpuss-1-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 12>;
> +
> + trips {
> + cpuss11_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpuss11_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> + };
> };
>
> arch_timer: timer {
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC
2023-08-24 12:30 ` [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC Priyansh Jain
2023-09-11 8:39 ` Priyansh Jain
@ 2023-09-20 2:36 ` Bjorn Andersson
1 sibling, 0 replies; 6+ messages in thread
From: Bjorn Andersson @ 2023-09-20 2:36 UTC (permalink / raw)
To: Priyansh Jain
Cc: Andy Gross, Konrad Dybcio, Amit Kucheria, Thara Gopinath,
Rafael J . Wysocki, Daniel Lezcano, Zhang Rui, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, linux-pm,
devicetree, linux-kernel, quic_manafm
On Thu, Aug 24, 2023 at 06:00:01PM +0530, Priyansh Jain wrote:
> Add tsens and thermal devicetree node for sa8775p SoC.
>
> Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 1096 +++++++++++++++++++++++++
> 1 file changed, 1096 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index b130136acffe..abba42ea5946 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -2306,6 +2306,1102 @@
>
> #freq-domain-cells = <1>;
I believe this would be the tail of the cpufreq_hw node, @0x18591000.
> };
> +
> + tsens0: thermal-sensor@c222000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c263000 0x0 0x1ff>,
If so, then this is not inserted to maintain the sort order (by address)
of the nodes under /soc. Please update the placement of this node.
Also, the unit address above is c222000, but based on this cell it
should be c263000.
> + <0x0 0x0c222000 0x0 0x8>;
> + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <12>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens1: thermal-sensor@c223000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c265000 0x0 0x1ff>,
> + <0x0 0x0c223000 0x0 0x8>;
> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <12>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens2: thermal-sensor@c224000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c251000 0x0 0x1ff>,
0x0c251000 < 0x0c265000, please order them properly.
> + <0x0 0x0c224000 0x0 0x8>;
> + interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <13>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens3: thermal-sensor@c225000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c252000 0x0 0x1ff>,
> + <0x0 0x0c225000 0x0 0x8>;
> + interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <13>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + thermal_zones: thermal-zones {
This does not belong alongside the mmio-devices under /soc, move this
out (and keep / sorted alphabetically on the node name).
> + aoss-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 0>;
> +
> + trips {
> + aoss0_alert0: trip-point0 {
Why does all these nodes have labels?
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + aoss0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
[..]
> + };
/soc does not end here anymore, please remember to rebase the change on
v6.6-rc1.
Thanks,
Bjorn
> };
>
> arch_timer: timer {
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-09-20 2:32 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-08-24 12:29 [PATCH v2 0/2] Enable tsens and thermal for sa8775p SoC Priyansh Jain
2023-08-24 12:30 ` [PATCH v2 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible Priyansh Jain
2023-08-24 14:23 ` Krzysztof Kozlowski
2023-08-24 12:30 ` [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC Priyansh Jain
2023-09-11 8:39 ` Priyansh Jain
2023-09-20 2:36 ` Bjorn Andersson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.