* [GIT PULL 0/4] ARM: mvebu: changes for v3.9
@ 2013-01-12 23:29 Jason Cooper
2013-01-12 23:29 ` [GIT PULL 1/4] ARM: mvebu: cleanup " Jason Cooper
` (7 more replies)
0 siblings, 8 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-12 23:29 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 417f2732930e5c5544ef3a3a0141d44b2639e8e8:
Merge branch 'next/drivers' into for-next (2013-01-08 15:09:33 -0800)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git mvebu/for-next
for you to fetch changes up to 9e896ba256a01808f2804944f258b0ac578d9c2e:
Merge branch 'mvebu/dt' into mvebu/for-next (2013-01-12 22:39:17 +0000)
----------------------------------------------------------------
Andrew Lunn (1):
ARM: Kirkwood: Cleanup unneeded include files
Gregory CLEMENT (6):
arm: mvebu: Improve the SMP support of the interrupt controller
ARM: mvebu: Fix interrupt handling in SMP mode
rtc: Add support of rtc-mv for MVEBU SoCs
arm: mvebu: Update defconfig with Marvell RTC support
arm: mvebu: Add RTC support for Armada 370 and Armada XP
arm: mvebu: Fix memory size for Armada 370 DB
Jason Cooper (9):
Merge branch 'mvebu/drivers' into mvebu/boards
Merge branch 'mvebu/drivers' into mvebu/boards
Merge branch 'mvebu/boards' into mvebu/dt
Merge branch 'mvebu/fixes' into mvebu/dt
Merge branch 'mvebu/fixes' into mvebu/for-next
Merge branch 'mvebu/cleanup' into mvebu/for-next
Merge branch 'mvebu/drivers' into mvebu/for-next
Merge branch 'mvebu/boards' into mvebu/for-next
Merge branch 'mvebu/dt' into mvebu/for-next
Jason Gunthorpe (1):
ARM: Kirkwood: Support basic hotplug for PCI-E
Nobuhiro Iwamatsu (3):
ARM: Kirkwood: Add pinctrl of TWSI1 to 88f6282
ARM: Kirkwood: Add pinctrl of NAND to 88f6282
ARM: Kirkwood: Convert openblocks A6 board to pinctrl
Sebastian Hesselbarth (3):
ARM: Dove: add Cubox sdhci card detect gpio
ARM: Dove: move CuBox led pinctrl to gpio-leds node
ARM: Dove: add fixed regulator for CuBox USB power
Simon Guinot (1):
ARM: Kirkwood: fix ns2 gpios by converting to pinctrl
Thomas Petazzoni (19):
arm: mvebu: use global interrupts for GPIOs on Armada XP
arm: kirkwood: dockstar: remove useless include of SDIO header
mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
mmc: mvsdio: use slot-gpio for card detect gpio
mmc: mvsdio: implement a Device Tree binding
mmc: mvsdio: add pinctrl integration
arm: mvebu: enable SDIO support in mvebu_defconfig
arm: mvebu: enable mwifiex driver in mvebu_defconfig
arm: mvebu: enable btmrvl driver in mvebu_defconfig
arm: mvebu: add DT information for the SDIO interface of Armada 370/XP
arm: mvebu: add pin muxing options for the SDIO interface on Armada 370
arm: mvebu: add pin muxing options for the SDIO interface on Armada XP
arm: mvebu: enable the SD card slot on Armada XP DB board
arm: mvebu: enable the SD card slot on Armada 370 DB board
arm: mvebu: enable the SDIO interface on the Globalscale Mirabox
arm: kirkwood: add Device Tree informations for the SDIO controller
arm: kirkwood: dreamplug: use Device Tree to probe SDIO
arm: kirkwood: mplcec4: use Device Tree to probe SDIO
arm: kirkwood: add pinmux option for the SDIO interface on 88F6282
Willy Tarreau (1):
ARM: kirkwood: convert Guruplug Server Plus to use the device tree
.../devicetree/bindings/mmc/orion-sdio.txt | 17 +++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armada-370-db.dts | 17 ++-
arch/arm/boot/dts/armada-370-mirabox.dts | 10 ++
arch/arm/boot/dts/armada-370-xp.dtsi | 14 +++
arch/arm/boot/dts/armada-370.dtsi | 12 ++
arch/arm/boot/dts/armada-xp-db.dts | 7 ++
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 20 +--
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 27 ++--
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 27 ++--
arch/arm/boot/dts/armada-xp.dtsi | 2 +-
arch/arm/boot/dts/dove-cubox.dts | 40 +++++-
arch/arm/boot/dts/kirkwood-6282.dtsi | 17 +++
arch/arm/boot/dts/kirkwood-dreamplug.dts | 7 ++
.../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 94 ++++++++++++++
arch/arm/boot/dts/kirkwood-mplcec4.dts | 11 +-
arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 16 +++
arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 116 ++++++++++++++++++
arch/arm/boot/dts/kirkwood.dtsi | 8 ++
arch/arm/configs/mvebu_defconfig | 9 ++
arch/arm/mach-dove/Kconfig | 2 +
arch/arm/mach-kirkwood/Kconfig | 7 ++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/board-dreamplug.c | 6 -
arch/arm/mach-kirkwood/board-dt.c | 4 +
arch/arm/mach-kirkwood/board-guruplug.c | 39 ++++++
arch/arm/mach-kirkwood/board-ib62x0.c | 1 -
arch/arm/mach-kirkwood/board-mplcec4.c | 8 --
arch/arm/mach-kirkwood/board-ns2.c | 38 ------
arch/arm/mach-kirkwood/board-openblocks_a6.c | 44 -------
arch/arm/mach-kirkwood/common.h | 5 +
arch/arm/mach-kirkwood/dockstar-setup.c | 1 -
arch/arm/mach-kirkwood/pcie.c | 10 +-
arch/arm/mach-mvebu/irq-armada-370-xp.c | 72 +++++++++++
drivers/mmc/host/mvsdio.c | 136 +++++++++------------
drivers/rtc/Kconfig | 2 +-
36 files changed, 629 insertions(+), 219 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/orion-sdio.txt
create mode 100644 arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
create mode 100644 arch/arm/mach-kirkwood/board-guruplug.c
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 1/4] ARM: mvebu: cleanup for v3.9
2013-01-12 23:29 [GIT PULL 0/4] ARM: mvebu: changes for v3.9 Jason Cooper
@ 2013-01-12 23:29 ` Jason Cooper
2013-01-12 23:29 ` [GIT PULL 2/4] ARM: mvebu: drivers " Jason Cooper
` (6 subsequent siblings)
7 siblings, 0 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-12 23:29 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit d1c3ed669a2d452cacfb48c2d171a1f364dae2ed:
Linux 3.8-rc2 (2013-01-02 18:13:21 -0800)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git tags/cleanup_for_v3.9
for you to fetch changes up to b96e1b1c3c5319294edb0970b6d5bf099c0e85eb:
ARM: Kirkwood: Cleanup unneeded include files (2013-01-12 21:50:10 +0000)
----------------------------------------------------------------
mvebu cleanup for v3.9
- remove unneeded includes due to DT conversion
----------------------------------------------------------------
Andrew Lunn (1):
ARM: Kirkwood: Cleanup unneeded include files
Thomas Petazzoni (1):
arm: kirkwood: dockstar: remove useless include of SDIO header
arch/arm/mach-kirkwood/board-ib62x0.c | 1 -
arch/arm/mach-kirkwood/board-mplcec4.c | 1 -
arch/arm/mach-kirkwood/dockstar-setup.c | 1 -
3 files changed, 3 deletions(-)
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 2/4] ARM: mvebu: drivers for v3.9
2013-01-12 23:29 [GIT PULL 0/4] ARM: mvebu: changes for v3.9 Jason Cooper
2013-01-12 23:29 ` [GIT PULL 1/4] ARM: mvebu: cleanup " Jason Cooper
@ 2013-01-12 23:29 ` Jason Cooper
2013-01-12 23:29 ` [GIT PULL 3/4] ARM: mvebu: boards " Jason Cooper
` (5 subsequent siblings)
7 siblings, 0 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-12 23:29 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit d1c3ed669a2d452cacfb48c2d171a1f364dae2ed:
Linux 3.8-rc2 (2013-01-02 18:13:21 -0800)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git tags/drivers_for_v3.9
for you to fetch changes up to a6ae83d745063fee77648afc95de58d7a82d4df5:
mmc: mvsdio: add pinctrl integration (2013-01-10 02:46:59 +0000)
----------------------------------------------------------------
mvebu drivers for v3.9
- mvsdio
- use slot-gpio for card detect and write protect
- add DT binding
- add pinctrl integration
- use rtc-mv in mvebu armv7 SoCs
- add pci-e hotplug for kirkwood
----------------------------------------------------------------
Gregory CLEMENT (1):
rtc: Add support of rtc-mv for MVEBU SoCs
Jason Gunthorpe (1):
ARM: Kirkwood: Support basic hotplug for PCI-E
Thomas Petazzoni (4):
mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
mmc: mvsdio: use slot-gpio for card detect gpio
mmc: mvsdio: implement a Device Tree binding
mmc: mvsdio: add pinctrl integration
.../devicetree/bindings/mmc/orion-sdio.txt | 17 +++
arch/arm/mach-kirkwood/pcie.c | 10 +-
drivers/mmc/host/mvsdio.c | 136 +++++++++------------
drivers/rtc/Kconfig | 2 +-
4 files changed, 82 insertions(+), 83 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/orion-sdio.txt
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 3/4] ARM: mvebu: boards for v3.9
2013-01-12 23:29 [GIT PULL 0/4] ARM: mvebu: changes for v3.9 Jason Cooper
2013-01-12 23:29 ` [GIT PULL 1/4] ARM: mvebu: cleanup " Jason Cooper
2013-01-12 23:29 ` [GIT PULL 2/4] ARM: mvebu: drivers " Jason Cooper
@ 2013-01-12 23:29 ` Jason Cooper
2013-01-12 23:29 ` [GIT PULL 4/4] ARM: mvebu: dt " Jason Cooper
` (4 subsequent siblings)
7 siblings, 0 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-12 23:29 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit d1c3ed669a2d452cacfb48c2d171a1f364dae2ed:
Linux 3.8-rc2 (2013-01-02 18:13:21 -0800)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git tags/boards_for_v3.9
for you to fetch changes up to 3db7063cd2f8284190ef81e9dd0e9b902c73c5e9:
arm: mvebu: enable btmrvl driver in mvebu_defconfig (2013-01-10 02:49:23 +0000)
----------------------------------------------------------------
mvebu boards for v3.9
- Guruplug Server Plus DT board
- mvebu improved SMP support in interrupt controller
- update mvebu_defconfig
----------------------------------------------------------------
Gregory CLEMENT (4):
arm: mvebu: Improve the SMP support of the interrupt controller
ARM: mvebu: Fix interrupt handling in SMP mode
rtc: Add support of rtc-mv for MVEBU SoCs
arm: mvebu: Update defconfig with Marvell RTC support
Jason Cooper (2):
Merge branch 'mvebu/drivers' into mvebu/boards
Merge branch 'mvebu/drivers' into mvebu/boards
Jason Gunthorpe (1):
ARM: Kirkwood: Support basic hotplug for PCI-E
Thomas Petazzoni (7):
mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
mmc: mvsdio: use slot-gpio for card detect gpio
mmc: mvsdio: implement a Device Tree binding
mmc: mvsdio: add pinctrl integration
arm: mvebu: enable SDIO support in mvebu_defconfig
arm: mvebu: enable mwifiex driver in mvebu_defconfig
arm: mvebu: enable btmrvl driver in mvebu_defconfig
Willy Tarreau (1):
ARM: kirkwood: convert Guruplug Server Plus to use the device tree
.../devicetree/bindings/mmc/orion-sdio.txt | 17 +++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armada-xp.dtsi | 2 +-
.../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 94 ++++++++++++++
arch/arm/configs/mvebu_defconfig | 9 ++
arch/arm/mach-kirkwood/Kconfig | 7 ++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/board-dt.c | 4 +
arch/arm/mach-kirkwood/board-guruplug.c | 39 ++++++
arch/arm/mach-kirkwood/common.h | 5 +
arch/arm/mach-kirkwood/pcie.c | 10 +-
arch/arm/mach-mvebu/irq-armada-370-xp.c | 72 +++++++++++
drivers/mmc/host/mvsdio.c | 136 +++++++++------------
drivers/rtc/Kconfig | 2 +-
14 files changed, 315 insertions(+), 84 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/orion-sdio.txt
create mode 100644 arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
create mode 100644 arch/arm/mach-kirkwood/board-guruplug.c
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 4/4] ARM: mvebu: dt for v3.9
2013-01-12 23:29 [GIT PULL 0/4] ARM: mvebu: changes for v3.9 Jason Cooper
` (2 preceding siblings ...)
2013-01-12 23:29 ` [GIT PULL 3/4] ARM: mvebu: boards " Jason Cooper
@ 2013-01-12 23:29 ` Jason Cooper
[not found] ` <E1TuAWu-0004Jx-Hn@merlin.infradead.org>
` (3 subsequent siblings)
7 siblings, 0 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-12 23:29 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit d1c3ed669a2d452cacfb48c2d171a1f364dae2ed:
Linux 3.8-rc2 (2013-01-02 18:13:21 -0800)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git tags/dt_for_v3.9
for you to fetch changes up to 877ddfac50bfeabc4729d0b8ac41989d226148b9:
ARM: Dove: add fixed regulator for CuBox USB power (2013-01-12 22:35:56 +0000)
----------------------------------------------------------------
mvebu dt changes for v3.9
- mvebu
- add rtc support
- add sdio support
- kirkwood
- add sdio support
- add twsi1 and nand to 88f6282
- convert openblocks A6 to pinctrl
- dove
- move led pinctrl to gpio-leds node
- use fixed regulator for usb power
----------------------------------------------------------------
Andrew Lunn (5):
ARM: Kirkwood: Fix missing clk for USB device.
Power: gpio-poweroff: Fix documentation and gpio_is_valid
ARM: Kirkwood: Fix missing sdio clock
ARM: Kirkwood: Use fixed-regulator instead of board gpio call
arm: mvebu: Add missing ; for cpu node.
Gregory CLEMENT (7):
arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver
arm: mvebu: Improve the SMP support of the interrupt controller
ARM: mvebu: Fix interrupt handling in SMP mode
rtc: Add support of rtc-mv for MVEBU SoCs
arm: mvebu: Update defconfig with Marvell RTC support
arm: mvebu: Add RTC support for Armada 370 and Armada XP
arm: mvebu: Fix memory size for Armada 370 DB
Jason Cooper (4):
Merge branch 'mvebu/drivers' into mvebu/boards
Merge branch 'mvebu/drivers' into mvebu/boards
Merge branch 'mvebu/boards' into mvebu/dt
Merge branch 'mvebu/fixes' into mvebu/dt
Jason Gunthorpe (1):
ARM: Kirkwood: Support basic hotplug for PCI-E
Joshua Coombs (1):
clk: mvebu: Remove inappropriate __init tagging
Nobuhiro Iwamatsu (4):
ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
ARM: Kirkwood: Add pinctrl of TWSI1 to 88f6282
ARM: Kirkwood: Add pinctrl of NAND to 88f6282
ARM: Kirkwood: Convert openblocks A6 board to pinctrl
Sebastian Hesselbarth (5):
ARM: Dove: Add pinctrl clock to DT
pinctrl: mvebu: make pdma clock on dove mandatory
ARM: Dove: add Cubox sdhci card detect gpio
ARM: Dove: move CuBox led pinctrl to gpio-leds node
ARM: Dove: add fixed regulator for CuBox USB power
Simon Guinot (1):
ARM: Kirkwood: fix ns2 gpios by converting to pinctrl
Thomas Petazzoni (22):
arm: mvebu: Armada XP MV78230 has two cores, not one
arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
dma: mv_xor: fix error handling of mv_xor_channel_add()
dma: mv_xor: fix error handling for clocks
arm: mvebu: use global interrupts for GPIOs on Armada XP
mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
mmc: mvsdio: use slot-gpio for card detect gpio
mmc: mvsdio: implement a Device Tree binding
mmc: mvsdio: add pinctrl integration
arm: mvebu: enable SDIO support in mvebu_defconfig
arm: mvebu: enable mwifiex driver in mvebu_defconfig
arm: mvebu: enable btmrvl driver in mvebu_defconfig
arm: mvebu: add DT information for the SDIO interface of Armada 370/XP
arm: mvebu: add pin muxing options for the SDIO interface on Armada 370
arm: mvebu: add pin muxing options for the SDIO interface on Armada XP
arm: mvebu: enable the SD card slot on Armada XP DB board
arm: mvebu: enable the SD card slot on Armada 370 DB board
arm: mvebu: enable the SDIO interface on the Globalscale Mirabox
arm: kirkwood: add Device Tree informations for the SDIO controller
arm: kirkwood: dreamplug: use Device Tree to probe SDIO
arm: kirkwood: mplcec4: use Device Tree to probe SDIO
arm: kirkwood: add pinmux option for the SDIO interface on 88F6282
Willy Tarreau (1):
ARM: kirkwood: convert Guruplug Server Plus to use the device tree
.../devicetree/bindings/gpio/gpio-poweroff.txt | 20 ++-
.../devicetree/bindings/mmc/orion-sdio.txt | 17 +++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armada-370-db.dts | 17 ++-
arch/arm/boot/dts/armada-370-mirabox.dts | 10 ++
arch/arm/boot/dts/armada-370-xp.dtsi | 20 ++-
arch/arm/boot/dts/armada-370.dtsi | 12 ++
arch/arm/boot/dts/armada-xp-db.dts | 7 ++
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 29 +++--
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 35 ++++--
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 35 ++++--
arch/arm/boot/dts/armada-xp.dtsi | 16 +--
arch/arm/boot/dts/dove-cubox.dts | 40 +++++-
arch/arm/boot/dts/dove.dtsi | 1 +
arch/arm/boot/dts/kirkwood-6282.dtsi | 18 +++
arch/arm/boot/dts/kirkwood-dreamplug.dts | 7 ++
.../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 94 ++++++++++++++
arch/arm/boot/dts/kirkwood-mplcec4.dts | 11 +-
arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 16 +++
arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 116 ++++++++++++++++++
arch/arm/boot/dts/kirkwood-topkick.dts | 17 +++
arch/arm/boot/dts/kirkwood.dtsi | 9 ++
arch/arm/configs/mvebu_defconfig | 13 +-
arch/arm/mach-dove/Kconfig | 2 +
arch/arm/mach-kirkwood/Kconfig | 7 ++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/board-dreamplug.c | 6 -
arch/arm/mach-kirkwood/board-dt.c | 8 ++
arch/arm/mach-kirkwood/board-guruplug.c | 39 ++++++
arch/arm/mach-kirkwood/board-mplcec4.c | 7 --
arch/arm/mach-kirkwood/board-ns2.c | 38 ------
arch/arm/mach-kirkwood/board-openblocks_a6.c | 44 -------
arch/arm/mach-kirkwood/board-usi_topkick.c | 4 -
arch/arm/mach-kirkwood/common.h | 5 +
arch/arm/mach-kirkwood/pcie.c | 10 +-
arch/arm/mach-mvebu/irq-armada-370-xp.c | 72 +++++++++++
drivers/clk/mvebu/clk-gating-ctrl.c | 2 +-
drivers/dma/mv_xor.c | 9 +-
drivers/mmc/host/mvsdio.c | 136 +++++++++------------
drivers/pinctrl/mvebu/pinctrl-dove.c | 7 +-
drivers/power/reset/gpio-poweroff.c | 33 +++--
drivers/rtc/Kconfig | 2 +-
42 files changed, 730 insertions(+), 263 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/orion-sdio.txt
create mode 100644 arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
create mode 100644 arch/arm/mach-kirkwood/board-guruplug.c
^ permalink raw reply [flat|nested] 23+ messages in thread
[parent not found: <E1TuAWu-0004Jx-Hn@merlin.infradead.org>]
* [GIT PULL 2/4] ARM: mvebu: drivers for v3.9
[not found] ` <E1TuAWu-0004Jx-Hn@merlin.infradead.org>
@ 2013-01-13 1:05 ` Russell King - ARM Linux
2013-01-13 1:28 ` Jason Cooper
0 siblings, 1 reply; 23+ messages in thread
From: Russell King - ARM Linux @ 2013-01-13 1:05 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Jan 12, 2013 at 11:29:16PM +0000, Jason Cooper wrote:
> Thomas Petazzoni (4):
> mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
> mmc: mvsdio: use slot-gpio for card detect gpio
> mmc: mvsdio: implement a Device Tree binding
> mmc: mvsdio: add pinctrl integration
Does this include the fixes for the really broken stuff in that driver?
If not, hold off on this until it's fixed. The current state of the
driver is rather BROKEN and it needs fixing in -rc. It would be best
to get it fixed there _then_ base development on top of that to avoid
conflicts.
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 2/4] ARM: mvebu: drivers for v3.9
2013-01-13 1:05 ` [GIT PULL 2/4] ARM: mvebu: drivers " Russell King - ARM Linux
@ 2013-01-13 1:28 ` Jason Cooper
0 siblings, 0 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-13 1:28 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Jan 13, 2013 at 01:05:35AM +0000, Russell King - ARM Linux wrote:
> On Sat, Jan 12, 2013 at 11:29:16PM +0000, Jason Cooper wrote:
> > Thomas Petazzoni (4):
> > mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
> > mmc: mvsdio: use slot-gpio for card detect gpio
> > mmc: mvsdio: implement a Device Tree binding
> > mmc: mvsdio: add pinctrl integration
>
> Does this include the fixes for the really broken stuff in that driver?
> If not, hold off on this until it's fixed. The current state of the
> driver is rather BROKEN and it needs fixing in -rc. It would be best
> to get it fixed there _then_ base development on top of that to avoid
> conflicts.
Ahh, I found the thread you were referring to. I'll take a look at it
tonight or tomorrow.
thx,
Jason.
^ permalink raw reply [flat|nested] 23+ messages in thread
[parent not found: <E1TuAWD-0004Ec-1G@merlin.infradead.org>]
[parent not found: <E1TuAWi-0004H4-K6@merlin.infradead.org>]
* [GIT PULL 4/4] ARM: mvebu: dt for v3.9
[not found] ` <E1TuAWi-0004H4-K6@merlin.infradead.org>
@ 2013-01-13 1:06 ` Russell King - ARM Linux
2013-01-13 1:30 ` Jason Cooper
0 siblings, 1 reply; 23+ messages in thread
From: Russell King - ARM Linux @ 2013-01-13 1:06 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Jan 12, 2013 at 11:29:24PM +0000, Jason Cooper wrote:
> The following changes since commit d1c3ed669a2d452cacfb48c2d171a1f364dae2ed:
>
> Linux 3.8-rc2 (2013-01-02 18:13:21 -0800)
>
> are available in the git repository at:
>
> git://git.infradead.org/users/jcooper/linux.git tags/dt_for_v3.9
>
> for you to fetch changes up to 877ddfac50bfeabc4729d0b8ac41989d226148b9:
>
> ARM: Dove: add fixed regulator for CuBox USB power (2013-01-12 22:35:56 +0000)
>
> ----------------------------------------------------------------
> mvebu dt changes for v3.9
> - mvebu
> - add rtc support
> - add sdio support
> - kirkwood
> - add sdio support
> - add twsi1 and nand to 88f6282
> - convert openblocks A6 to pinctrl
> - dove
> - move led pinctrl to gpio-leds node
> - use fixed regulator for usb power
And a note specified dependency on previous pull requests...
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 4/4] ARM: mvebu: dt for v3.9
2013-01-13 1:06 ` [GIT PULL 4/4] ARM: mvebu: dt " Russell King - ARM Linux
@ 2013-01-13 1:30 ` Jason Cooper
0 siblings, 0 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-13 1:30 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Jan 13, 2013 at 01:06:58AM +0000, Russell King - ARM Linux wrote:
> On Sat, Jan 12, 2013 at 11:29:24PM +0000, Jason Cooper wrote:
> > The following changes since commit d1c3ed669a2d452cacfb48c2d171a1f364dae2ed:
> >
> > Linux 3.8-rc2 (2013-01-02 18:13:21 -0800)
> >
> > are available in the git repository at:
> >
> > git://git.infradead.org/users/jcooper/linux.git tags/dt_for_v3.9
> >
> > for you to fetch changes up to 877ddfac50bfeabc4729d0b8ac41989d226148b9:
> >
> > ARM: Dove: add fixed regulator for CuBox USB power (2013-01-12 22:35:56 +0000)
> >
> > ----------------------------------------------------------------
> > mvebu dt changes for v3.9
> > - mvebu
> > - add rtc support
> > - add sdio support
> > - kirkwood
> > - add sdio support
> > - add twsi1 and nand to 88f6282
> > - convert openblocks A6 to pinctrl
> > - dove
> > - move led pinctrl to gpio-leds node
> > - use fixed regulator for usb power
>
> And a note specified dependency on previous pull requests...
oops, you're right. I'll update them in V2 after we get the mvsdio
driver in better shape.
thx,
Jason.
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL V2 0/4] ARM: mvebu: changes for v3.9
2013-01-12 23:29 [GIT PULL 0/4] ARM: mvebu: changes for v3.9 Jason Cooper
` (6 preceding siblings ...)
[not found] ` <E1TuAWi-0004H4-K6@merlin.infradead.org>
@ 2013-01-23 2:48 ` Jason Cooper
2013-01-23 2:48 ` [GIT PULL V2 1/4] ARM: mvebu: cleanup " Jason Cooper
` (3 more replies)
7 siblings, 4 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-23 2:48 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 4b53ab9cb853e446f628e561ce6fcc527df30a76:
Merge branch 'mvebu/fixes' into mvebu/drivers (2013-01-23 01:42:14 +0000)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git mvebu/for-next
for you to fetch changes up to bf70a4aed75cdcfc765f896916cec73d3f94f3ec:
Merge branch 'mvebu/dt' into mvebu/for-next (2013-01-23 02:42:39 +0000)
----------------------------------------------------------------
Andrew Lunn (1):
ARM: Kirkwood: Cleanup unneeded include files
Gregory CLEMENT (2):
arm: mvebu: Update defconfig with Marvell RTC support
arm: mvebu: Add RTC support for Armada 370 and Armada XP
Jason Cooper (4):
Merge branch 'mvebu/cleanup' into mvebu/for-next
Merge branch 'mvebu/drivers' into mvebu/for-next
Merge branch 'mvebu/boards' into mvebu/for-next
Merge branch 'mvebu/dt' into mvebu/for-next
Nobuhiro Iwamatsu (3):
ARM: Kirkwood: Add pinctrl of TWSI1 to 88f6282
ARM: Kirkwood: Add pinctrl of NAND to 88f6282
ARM: Kirkwood: Convert openblocks A6 board to pinctrl
Sebastian Hesselbarth (2):
ARM: Dove: move CuBox led pinctrl to gpio-leds node
ARM: Dove: add fixed regulator for CuBox USB power
Thomas Petazzoni (18):
arm: kirkwood: dockstar: remove useless include of SDIO header
mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
mmc: mvsdio: use slot-gpio for card detect gpio
mmc: mvsdio: implement a Device Tree binding
mmc: mvsdio: add pinctrl integration
arm: mvebu: enable SDIO support in mvebu_defconfig
arm: mvebu: enable mwifiex driver in mvebu_defconfig
arm: mvebu: enable btmrvl driver in mvebu_defconfig
arm: mvebu: add DT information for the SDIO interface of Armada 370/XP
arm: mvebu: add pin muxing options for the SDIO interface on Armada 370
arm: mvebu: add pin muxing options for the SDIO interface on Armada XP
arm: mvebu: enable the SD card slot on Armada XP DB board
arm: mvebu: enable the SD card slot on Armada 370 DB board
arm: mvebu: enable the SDIO interface on the Globalscale Mirabox
arm: kirkwood: add Device Tree informations for the SDIO controller
arm: kirkwood: dreamplug: use Device Tree to probe SDIO
arm: kirkwood: mplcec4: use Device Tree to probe SDIO
arm: kirkwood: add pinmux option for the SDIO interface on 88F6282
.../devicetree/bindings/mmc/orion-sdio.txt | 17 +++
arch/arm/boot/dts/armada-370-db.dts | 15 +++
arch/arm/boot/dts/armada-370-mirabox.dts | 10 ++
arch/arm/boot/dts/armada-370-xp.dtsi | 14 +++
arch/arm/boot/dts/armada-370.dtsi | 12 ++
arch/arm/boot/dts/armada-xp-db.dts | 7 ++
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 6 +
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 6 +
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 6 +
arch/arm/boot/dts/dove-cubox.dts | 28 ++++-
arch/arm/boot/dts/kirkwood-6282.dtsi | 17 +++
arch/arm/boot/dts/kirkwood-dreamplug.dts | 7 ++
arch/arm/boot/dts/kirkwood-mplcec4.dts | 11 +-
arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 116 ++++++++++++++++++
arch/arm/boot/dts/kirkwood.dtsi | 8 ++
arch/arm/configs/mvebu_defconfig | 9 ++
arch/arm/mach-dove/Kconfig | 2 +
arch/arm/mach-kirkwood/board-dreamplug.c | 6 -
arch/arm/mach-kirkwood/board-ib62x0.c | 1 -
arch/arm/mach-kirkwood/board-mplcec4.c | 8 --
arch/arm/mach-kirkwood/board-openblocks_a6.c | 44 -------
arch/arm/mach-kirkwood/dockstar-setup.c | 1 -
drivers/mmc/host/mvsdio.c | 129 ++++++++++-----------
23 files changed, 351 insertions(+), 129 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/orion-sdio.txt
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL V2 1/4] ARM: mvebu: cleanup for v3.9
2013-01-23 2:48 ` [GIT PULL V2 0/4] ARM: mvebu: changes " Jason Cooper
@ 2013-01-23 2:48 ` Jason Cooper
2013-01-28 5:57 ` Olof Johansson
2013-01-23 2:48 ` [GIT PULL V2 2/4] ARM: mvebu: drivers " Jason Cooper
` (2 subsequent siblings)
3 siblings, 1 reply; 23+ messages in thread
From: Jason Cooper @ 2013-01-23 2:48 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit d1c3ed669a2d452cacfb48c2d171a1f364dae2ed:
Linux 3.8-rc2 (2013-01-02 18:13:21 -0800)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git tags/cleanup_for_v3.9
for you to fetch changes up to b96e1b1c3c5319294edb0970b6d5bf099c0e85eb:
ARM: Kirkwood: Cleanup unneeded include files (2013-01-12 21:50:10 +0000)
----------------------------------------------------------------
mvebu cleanup for v3.9
- remove unneeded includes due to DT conversion
----------------------------------------------------------------
Andrew Lunn (1):
ARM: Kirkwood: Cleanup unneeded include files
Thomas Petazzoni (1):
arm: kirkwood: dockstar: remove useless include of SDIO header
arch/arm/mach-kirkwood/board-ib62x0.c | 1 -
arch/arm/mach-kirkwood/board-mplcec4.c | 1 -
arch/arm/mach-kirkwood/dockstar-setup.c | 1 -
3 files changed, 3 deletions(-)
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL V2 1/4] ARM: mvebu: cleanup for v3.9
2013-01-23 2:48 ` [GIT PULL V2 1/4] ARM: mvebu: cleanup " Jason Cooper
@ 2013-01-28 5:57 ` Olof Johansson
0 siblings, 0 replies; 23+ messages in thread
From: Olof Johansson @ 2013-01-28 5:57 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 23, 2013 at 02:48:03AM +0000, Jason Cooper wrote:
> The following changes since commit d1c3ed669a2d452cacfb48c2d171a1f364dae2ed:
>
> Linux 3.8-rc2 (2013-01-02 18:13:21 -0800)
>
> are available in the git repository at:
>
> git://git.infradead.org/users/jcooper/linux.git tags/cleanup_for_v3.9
>
> for you to fetch changes up to b96e1b1c3c5319294edb0970b6d5bf099c0e85eb:
>
> ARM: Kirkwood: Cleanup unneeded include files (2013-01-12 21:50:10 +0000)
>
> ----------------------------------------------------------------
> mvebu cleanup for v3.9
> - remove unneeded includes due to DT conversion
>
> ----------------------------------------------------------------
> Andrew Lunn (1):
> ARM: Kirkwood: Cleanup unneeded include files
>
> Thomas Petazzoni (1):
> arm: kirkwood: dockstar: remove useless include of SDIO header
>
> arch/arm/mach-kirkwood/board-ib62x0.c | 1 -
> arch/arm/mach-kirkwood/board-mplcec4.c | 1 -
> arch/arm/mach-kirkwood/dockstar-setup.c | 1 -
> 3 files changed, 3 deletions(-)
Hi,
This one I pulled as mvebu/cleanup. I'm holding off on the others based
on my reply, since the drivers branch is base for the later branches.
-Olof
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL V2 2/4] ARM: mvebu: drivers for v3.9
2013-01-23 2:48 ` [GIT PULL V2 0/4] ARM: mvebu: changes " Jason Cooper
2013-01-23 2:48 ` [GIT PULL V2 1/4] ARM: mvebu: cleanup " Jason Cooper
@ 2013-01-23 2:48 ` Jason Cooper
2013-01-28 5:53 ` Olof Johansson
2013-01-23 2:48 ` [GIT PULL V2 3/4] ARM: mvebu: boards " Jason Cooper
2013-01-23 2:48 ` [GIT PULL V2 4/4] ARM: mvebu: dt " Jason Cooper
3 siblings, 1 reply; 23+ messages in thread
From: Jason Cooper @ 2013-01-23 2:48 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 4b53ab9cb853e446f628e561ce6fcc527df30a76:
Merge branch 'mvebu/fixes' into mvebu/drivers (2013-01-23 01:42:14 +0000)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git tags/drivers_for_v3.9
for you to fetch changes up to 43076a4c4e5fb92721bedc5d05b93468d6d76b2c:
mmc: mvsdio: add pinctrl integration (2013-01-23 01:42:29 +0000)
----------------------------------------------------------------
mvebu drivers for v3.9
- mvsdio
- use slot-gpio for card detect and write protect
- add DT binding
- add pinctrl integration
- use rtc-mv in mvebu armv7 SoCs
- add pci-e hotplug for kirkwood
depends on:
- mvebu/fixes
----------------------------------------------------------------
Thomas Petazzoni (4):
mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
mmc: mvsdio: use slot-gpio for card detect gpio
mmc: mvsdio: implement a Device Tree binding
mmc: mvsdio: add pinctrl integration
.../devicetree/bindings/mmc/orion-sdio.txt | 17 +++
drivers/mmc/host/mvsdio.c | 129 ++++++++++-----------
2 files changed, 80 insertions(+), 66 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/orion-sdio.txt
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL V2 2/4] ARM: mvebu: drivers for v3.9
2013-01-23 2:48 ` [GIT PULL V2 2/4] ARM: mvebu: drivers " Jason Cooper
@ 2013-01-28 5:53 ` Olof Johansson
2013-01-28 11:53 ` Chris Ball
0 siblings, 1 reply; 23+ messages in thread
From: Olof Johansson @ 2013-01-28 5:53 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 23, 2013 at 02:48:05AM +0000, Jason Cooper wrote:
> The following changes since commit 4b53ab9cb853e446f628e561ce6fcc527df30a76:
>
> Merge branch 'mvebu/fixes' into mvebu/drivers (2013-01-23 01:42:14 +0000)
>
> are available in the git repository at:
>
>
> git://git.infradead.org/users/jcooper/linux.git tags/drivers_for_v3.9
>
> for you to fetch changes up to 43076a4c4e5fb92721bedc5d05b93468d6d76b2c:
>
> mmc: mvsdio: add pinctrl integration (2013-01-23 01:42:29 +0000)
>
> ----------------------------------------------------------------
> mvebu drivers for v3.9
> - mvsdio
> - use slot-gpio for card detect and write protect
> - add DT binding
> - add pinctrl integration
> - use rtc-mv in mvebu armv7 SoCs
> - add pci-e hotplug for kirkwood
Hi,
I didn't see any acks by Chris Ball on these, he's usually pretty
responsive on code reviews so I just wanted to make sure he's OK with
us taking this through arm-soc, and aware of it.
Looks like this whole branch could go through the mmc tree? The dtsi
updates from the last branch would still go through arm-soc.
Either way is fine with me, I just don't want to make life difficult for Chris
in case he has some sweeping changes planned that might cause conflicts, etc.
-Olof
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL V2 2/4] ARM: mvebu: drivers for v3.9
2013-01-28 5:53 ` Olof Johansson
@ 2013-01-28 11:53 ` Chris Ball
2013-01-28 16:10 ` Jason Cooper
0 siblings, 1 reply; 23+ messages in thread
From: Chris Ball @ 2013-01-28 11:53 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Mon, Jan 28 2013, Olof Johansson wrote:
> I didn't see any acks by Chris Ball on these, he's usually pretty
> responsive on code reviews so I just wanted to make sure he's OK with
> us taking this through arm-soc, and aware of it.
>
> Looks like this whole branch could go through the mmc tree? The dtsi
> updates from the last branch would still go through arm-soc.
Thanks for the ping, would be good to take these via mmc-next so I've
pushed the four new mvsdio patches there now:
mmc: mvsdio: add pinctrl integration
mmc: mvsdio: implement a Device Tree binding
mmc: mvsdio: use slot-gpio for card detect gpio
mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
Hope that works okay for everyone,
- Chris.
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL V2 2/4] ARM: mvebu: drivers for v3.9
2013-01-28 11:53 ` Chris Ball
@ 2013-01-28 16:10 ` Jason Cooper
0 siblings, 0 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-28 16:10 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jan 28, 2013 at 06:53:40AM -0500, Chris Ball wrote:
> Hi,
>
> On Mon, Jan 28 2013, Olof Johansson wrote:
> > I didn't see any acks by Chris Ball on these, he's usually pretty
> > responsive on code reviews so I just wanted to make sure he's OK with
> > us taking this through arm-soc, and aware of it.
> >
> > Looks like this whole branch could go through the mmc tree? The dtsi
> > updates from the last branch would still go through arm-soc.
>
> Thanks for the ping, would be good to take these via mmc-next so I've
> pushed the four new mvsdio patches there now:
>
> mmc: mvsdio: add pinctrl integration
> mmc: mvsdio: implement a Device Tree binding
> mmc: mvsdio: use slot-gpio for card detect gpio
> mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
Thanks Chris, I'll redo these and depend on mmc-next at
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
thx,
Jason.
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL V2 3/4] ARM: mvebu: boards for v3.9
2013-01-23 2:48 ` [GIT PULL V2 0/4] ARM: mvebu: changes " Jason Cooper
2013-01-23 2:48 ` [GIT PULL V2 1/4] ARM: mvebu: cleanup " Jason Cooper
2013-01-23 2:48 ` [GIT PULL V2 2/4] ARM: mvebu: drivers " Jason Cooper
@ 2013-01-23 2:48 ` Jason Cooper
2013-01-23 2:48 ` [GIT PULL V2 4/4] ARM: mvebu: dt " Jason Cooper
3 siblings, 0 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-23 2:48 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 43076a4c4e5fb92721bedc5d05b93468d6d76b2c:
mmc: mvsdio: add pinctrl integration (2013-01-23 01:42:29 +0000)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git tags/boards_for_v3.9
for you to fetch changes up to 6c00ce51dd26ffcd978c657533a71af32dbf2793:
arm: mvebu: enable btmrvl driver in mvebu_defconfig (2013-01-23 01:57:37 +0000)
----------------------------------------------------------------
mvebu boards for v3.9
- Guruplug Server Plus DT board
- mvebu improved SMP support in interrupt controller
- update mvebu_defconfig
depends on:
- mvebu/fixes
- mvebu/drivers
----------------------------------------------------------------
Gregory CLEMENT (1):
arm: mvebu: Update defconfig with Marvell RTC support
Thomas Petazzoni (3):
arm: mvebu: enable SDIO support in mvebu_defconfig
arm: mvebu: enable mwifiex driver in mvebu_defconfig
arm: mvebu: enable btmrvl driver in mvebu_defconfig
arch/arm/configs/mvebu_defconfig | 9 +++++++++
1 file changed, 9 insertions(+)
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL V2 4/4] ARM: mvebu: dt for v3.9
2013-01-23 2:48 ` [GIT PULL V2 0/4] ARM: mvebu: changes " Jason Cooper
` (2 preceding siblings ...)
2013-01-23 2:48 ` [GIT PULL V2 3/4] ARM: mvebu: boards " Jason Cooper
@ 2013-01-23 2:48 ` Jason Cooper
3 siblings, 0 replies; 23+ messages in thread
From: Jason Cooper @ 2013-01-23 2:48 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 6c00ce51dd26ffcd978c657533a71af32dbf2793:
arm: mvebu: enable btmrvl driver in mvebu_defconfig (2013-01-23 01:57:37 +0000)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git tags/dt_for_v3.9
for you to fetch changes up to 68f4d9ecc4512aa5680f897187d607be91a3f95b:
ARM: Dove: add fixed regulator for CuBox USB power (2013-01-23 02:07:09 +0000)
----------------------------------------------------------------
mvebu dt changes for v3.9
- mvebu
- add rtc support
- add sdio support
- kirkwood
- add sdio support
- add twsi1 and nand to 88f6282
- convert openblocks A6 to pinctrl
- dove
- move led pinctrl to gpio-leds node
- use fixed regulator for usb power
depends on:
- mvebu/fixes
- mvebu/drivers
- mvebu/boards
----------------------------------------------------------------
Gregory CLEMENT (1):
arm: mvebu: Add RTC support for Armada 370 and Armada XP
Nobuhiro Iwamatsu (3):
ARM: Kirkwood: Add pinctrl of TWSI1 to 88f6282
ARM: Kirkwood: Add pinctrl of NAND to 88f6282
ARM: Kirkwood: Convert openblocks A6 board to pinctrl
Sebastian Hesselbarth (2):
ARM: Dove: move CuBox led pinctrl to gpio-leds node
ARM: Dove: add fixed regulator for CuBox USB power
Thomas Petazzoni (10):
arm: mvebu: add DT information for the SDIO interface of Armada 370/XP
arm: mvebu: add pin muxing options for the SDIO interface on Armada 370
arm: mvebu: add pin muxing options for the SDIO interface on Armada XP
arm: mvebu: enable the SD card slot on Armada XP DB board
arm: mvebu: enable the SD card slot on Armada 370 DB board
arm: mvebu: enable the SDIO interface on the Globalscale Mirabox
arm: kirkwood: add Device Tree informations for the SDIO controller
arm: kirkwood: dreamplug: use Device Tree to probe SDIO
arm: kirkwood: mplcec4: use Device Tree to probe SDIO
arm: kirkwood: add pinmux option for the SDIO interface on 88F6282
arch/arm/boot/dts/armada-370-db.dts | 15 ++++
arch/arm/boot/dts/armada-370-mirabox.dts | 10 +++
arch/arm/boot/dts/armada-370-xp.dtsi | 14 ++++
arch/arm/boot/dts/armada-370.dtsi | 12 +++
arch/arm/boot/dts/armada-xp-db.dts | 7 ++
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 6 ++
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 6 ++
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 6 ++
arch/arm/boot/dts/dove-cubox.dts | 28 ++++++-
arch/arm/boot/dts/kirkwood-6282.dtsi | 17 ++++
arch/arm/boot/dts/kirkwood-dreamplug.dts | 7 ++
arch/arm/boot/dts/kirkwood-mplcec4.dts | 11 ++-
arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 116 +++++++++++++++++++++++++++
arch/arm/boot/dts/kirkwood.dtsi | 8 ++
arch/arm/mach-dove/Kconfig | 2 +
arch/arm/mach-kirkwood/board-dreamplug.c | 6 --
arch/arm/mach-kirkwood/board-mplcec4.c | 7 --
arch/arm/mach-kirkwood/board-openblocks_a6.c | 44 ----------
18 files changed, 262 insertions(+), 60 deletions(-)
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 0/4] ARM: mvebu: changes for v3.9
@ 2013-02-01 15:51 Jason Cooper
2013-02-01 15:51 ` [GIT PULL 1/4] ARM: mvebu: cleanup " Jason Cooper
0 siblings, 1 reply; 23+ messages in thread
From: Jason Cooper @ 2013-02-01 15:51 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 19d23dac1b8f95e4a960fcbbb5687c33b9a2cd01:
Merge branch 'fixes' into for-next
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git mvebu/for-next
for you to fetch changes up to 7d8a7dce24f76242daf1c469878597b8acc4f78f:
Merge tag 'tags/dt_for_v3.9' into mvebu/for-next
Jason Cooper (5):
Merge tag 'tags/mvebu_fixes_for_v3.8-rc6' into mvebu/for-next
Merge tag 'tags/cleanup_for_v3.9_round2' into mvebu/for-next
Merge tag 'tags/drivers_for_v3.9' into mvebu/for-next
Merge tag 'tags/boards_for_v3.9' into mvebu/for-next
Merge tag 'tags/dt_for_v3.9' into mvebu/for-next
.../bindings/mmc/brcm,bcm2835-sdhci.txt | 18 ++
.../devicetree/bindings/mmc/orion-sdio.txt | 17 ++
Documentation/filesystems/f2fs.txt | 18 +-
MAINTAINERS | 2 +-
Makefile | 4 +-
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/armada-370-db.dts | 15 +
arch/arm/boot/dts/armada-370-mirabox.dts | 10 +
arch/arm/boot/dts/armada-370-rd.dts | 61 ++++
arch/arm/boot/dts/armada-370-xp.dtsi | 14 +
arch/arm/boot/dts/armada-370.dtsi | 12 +
arch/arm/boot/dts/armada-xp-db.dts | 7 +
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 6 +
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 6 +
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 6 +
.../arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 12 +
arch/arm/boot/dts/armada-xp.dtsi | 2 +-
arch/arm/boot/dts/dove-cubox.dts | 28 +-
arch/arm/boot/dts/dove.dtsi | 2 +
arch/arm/boot/dts/kirkwood-6282.dtsi | 17 ++
arch/arm/boot/dts/kirkwood-dreamplug.dts | 7 +
.../boot/dts/kirkwood-guruplug-server-plus.dts | 94 +++++++
arch/arm/boot/dts/kirkwood-mplcec4.dts | 11 +-
arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 6 +
arch/arm/boot/dts/kirkwood-nsa310.dts | 27 ++
arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 116 ++++++++
arch/arm/boot/dts/kirkwood.dtsi | 8 +
arch/arm/configs/dove_defconfig | 28 +-
arch/arm/configs/kirkwood_defconfig | 1 +
arch/arm/configs/mvebu_defconfig | 16 ++
arch/arm/kernel/head.S | 5 +-
arch/arm/kernel/hyp-stub.S | 18 +-
arch/arm/mach-dove/Kconfig | 7 +
arch/arm/mach-dove/Makefile | 4 +-
arch/arm/mach-dove/board-dt.c | 102 +++++++
arch/arm/mach-dove/common.c | 114 +-------
arch/arm/mach-imx/clk-imx25.c | 6 +-
arch/arm/mach-imx/clk-imx27.c | 6 +-
arch/arm/mach-imx/clk-imx31.c | 6 +-
arch/arm/mach-imx/clk-imx35.c | 6 +-
arch/arm/mach-imx/clk-imx51-imx53.c | 6 +-
arch/arm/mach-imx/devices/devices-common.h | 1 +
.../mach-imx/devices/platform-fsl-usb2-udc.c | 15 +-
arch/arm/mach-kirkwood/Kconfig | 7 +
arch/arm/mach-kirkwood/Makefile | 2 +-
arch/arm/mach-kirkwood/board-dreamplug.c | 6 -
arch/arm/mach-kirkwood/board-dt.c | 15 +-
arch/arm/mach-kirkwood/board-guruplug.c | 39 +++
arch/arm/mach-kirkwood/board-ib62x0.c | 1 -
arch/arm/mach-kirkwood/board-mplcec4.c | 8 -
arch/arm/mach-kirkwood/board-ns2.c | 14 -
arch/arm/mach-kirkwood/board-nsa310.c | 51 +---
arch/arm/mach-kirkwood/board-openblocks_a6.c | 44 ---
arch/arm/mach-kirkwood/common.c | 23 ++
arch/arm/mach-kirkwood/common.h | 6 +
arch/arm/mach-kirkwood/dockstar-setup.c | 1 -
arch/arm/mach-kirkwood/include/mach/kirkwood.h | 3 +-
arch/arm/mach-kirkwood/pcie.c | 10 +-
arch/arm/mach-mvebu/irq-armada-370-xp.c | 72 +++++
arch/arm/mm/dma-mapping.c | 18 +-
arch/arm/mm/mmu.c | 2 +-
arch/arm/plat-orion/mpp.c | 2 +-
arch/arm/vfp/entry.S | 6 +-
arch/arm/vfp/vfphw.S | 4 +-
arch/arm64/include/asm/elf.h | 5 +-
arch/ia64/kernel/ptrace.c | 27 --
arch/m68k/include/asm/dma-mapping.h | 16 ++
arch/m68k/include/asm/pgtable_no.h | 2 +
arch/m68k/include/asm/unistd.h | 2 +-
arch/m68k/include/uapi/asm/unistd.h | 1 +
arch/m68k/kernel/syscalltable.S | 1 +
arch/m68k/mm/init.c | 8 +-
arch/parisc/kernel/entry.S | 18 +-
arch/parisc/kernel/irq.c | 6 +-
arch/parisc/kernel/ptrace.c | 2 +-
arch/parisc/kernel/signal.c | 4 +-
arch/parisc/math-emu/cnv_float.h | 11 +-
arch/powerpc/kvm/emulate.c | 2 +
arch/x86/kernel/cpu/perf_event.c | 6 -
arch/x86/kernel/entry_32.S | 1 -
arch/x86/kernel/step.c | 9 +-
arch/x86/xen/smp.c | 7 -
drivers/acpi/apei/apei-base.c | 3 +
drivers/acpi/processor_idle.c | 4 +
drivers/acpi/processor_perflib.c | 7 +
drivers/ata/ahci.c | 8 +-
drivers/ata/libahci.c | 6 +-
drivers/ata/libata-core.c | 22 +-
drivers/ata/libata-eh.c | 2 +-
drivers/base/regmap/regmap-debugfs.c | 2 -
drivers/base/regmap/regmap.c | 2 +-
drivers/block/virtio_blk.c | 7 +-
drivers/cpufreq/Kconfig.x86 | 2 +-
drivers/cpufreq/acpi-cpufreq.c | 7 +
drivers/cpufreq/cpufreq-cpu0.c | 5 +
drivers/cpufreq/omap-cpufreq.c | 3 +
drivers/cpuidle/Kconfig | 6 +
drivers/cpuidle/Makefile | 1 +
.../cpuidle/cpuidle-kirkwood.c | 45 ++-
drivers/devfreq/devfreq.c | 5 +
drivers/devfreq/exynos4_bus.c | 94 +++++--
drivers/dma/imx-dma.c | 5 +-
drivers/dma/ioat/dma_v3.c | 2 +-
drivers/dma/tegra20-apb-dma.c | 8 +-
drivers/gpio/gpio-mvebu.c | 6 -
drivers/gpio/gpio-samsung.c | 14 +-
drivers/gpu/drm/i915/i915_debugfs.c | 3 +
drivers/gpu/drm/i915/i915_drv.h | 3 +
drivers/gpu/drm/i915/i915_gem_execbuffer.c | 21 ++
drivers/gpu/drm/i915/i915_irq.c | 11 +
drivers/gpu/drm/i915/i915_reg.h | 2 +
drivers/gpu/drm/i915/intel_dp.c | 47 +++-
drivers/gpu/drm/i915/intel_pm.c | 17 +-
drivers/gpu/drm/radeon/evergreen.c | 6 +
drivers/gpu/drm/radeon/ni.c | 6 +
drivers/gpu/drm/radeon/r600.c | 6 +
drivers/gpu/drm/radeon/radeon.h | 3 +-
drivers/gpu/drm/radeon/radeon_drv.c | 3 +-
drivers/gpu/drm/radeon/radeon_object.c | 18 +-
drivers/gpu/drm/radeon/radeon_ring.c | 2 +
drivers/gpu/drm/radeon/radeon_semaphore.c | 4 +
drivers/gpu/drm/radeon/reg_srcs/rv515 | 2 +
drivers/gpu/drm/radeon/si.c | 6 +
drivers/gpu/drm/ttm/ttm_bo.c | 1 +
drivers/gpu/drm/ttm/ttm_bo_util.c | 11 +-
drivers/hv/hv_balloon.c | 35 ++-
drivers/i2c/busses/i2c-designware-core.c | 4 +
drivers/i2c/busses/i2c-mxs.c | 6 +-
drivers/i2c/busses/i2c-omap.c | 6 +-
drivers/i2c/busses/i2c-sirf.c | 4 +
drivers/i2c/muxes/i2c-mux-pinctrl.c | 2 +-
drivers/idle/intel_idle.c | 3 +-
drivers/media/i2c/m5mols/m5mols_core.c | 2 +-
drivers/media/platform/omap3isp/ispvideo.c | 3 -
drivers/media/platform/s5p-fimc/fimc-mdevice.c | 2 +-
drivers/media/platform/s5p-mfc/s5p_mfc.c | 88 +++---
drivers/media/usb/gspca/kinect.c | 1 +
drivers/media/usb/gspca/sonixb.c | 13 +-
drivers/media/usb/gspca/sonixj.c | 1 +
drivers/media/usb/uvc/uvc_ctrl.c | 4 +-
drivers/media/usb/uvc/uvc_v4l2.c | 6 +-
drivers/media/v4l2-core/videobuf2-core.c | 4 +-
drivers/misc/ti-st/st_kim.c | 37 ++-
drivers/mmc/card/block.c | 30 +-
drivers/mmc/card/queue.c | 32 ++-
drivers/mmc/card/queue.h | 3 +
drivers/mmc/core/bus.c | 1 +
drivers/mmc/core/core.c | 121 +++++++-
drivers/mmc/core/core.h | 1 +
drivers/mmc/core/sdio.c | 33 ++-
drivers/mmc/core/slot-gpio.c | 57 +++-
drivers/mmc/host/Kconfig | 11 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/mvsdio.c | 131 +++++----
drivers/mmc/host/sdhci-bcm2835.c | 227 +++++++++++++++
drivers/mmc/host/sdhci-esdhc-imx.c | 59 +---
drivers/mmc/host/sdhci-pxav3.c | 12 +-
drivers/mmc/host/sdhci.c | 117 +++++---
drivers/mmc/host/sh_mmcif.c | 280 +++++++++++--------
drivers/mmc/host/tmio_mmc_pio.c | 8 -
drivers/pci/hotplug/pciehp.h | 2 +-
drivers/pci/hotplug/pciehp_core.c | 11 +-
drivers/pci/hotplug/pciehp_ctrl.c | 8 +-
drivers/pci/hotplug/pciehp_hpc.c | 11 +-
drivers/pci/hotplug/shpchp.h | 3 +-
drivers/pci/hotplug/shpchp_core.c | 36 +--
drivers/pci/hotplug/shpchp_ctrl.c | 6 +-
drivers/pci/pcie/Kconfig | 2 +-
drivers/pci/pcie/aer/aerdrv_core.c | 1 +
drivers/pci/pcie/aspm.c | 3 +
drivers/rtc/Kconfig | 2 +-
drivers/staging/iio/adc/mxs-lradc.c | 2 +-
drivers/staging/iio/gyro/adis16080_core.c | 2 +-
drivers/staging/sb105x/sb_pci_mp.c | 2 +-
drivers/staging/vt6656/bssdb.h | 1 -
drivers/staging/vt6656/int.h | 1 -
drivers/staging/vt6656/iocmd.h | 33 ++-
drivers/staging/vt6656/iowpa.h | 8 +-
drivers/staging/wlan-ng/prism2mgmt.c | 2 +-
drivers/tty/pty.c | 2 +
drivers/tty/serial/8250/8250.c | 11 +
drivers/tty/serial/8250/8250.h | 1 +
drivers/tty/serial/8250/8250_dw.c | 2 +-
drivers/tty/serial/8250/8250_pci.c | 42 ++-
drivers/tty/serial/ifx6x60.c | 4 +-
drivers/tty/serial/mxs-auart.c | 6 +-
drivers/tty/serial/samsung.c | 1 -
drivers/tty/serial/vt8500_serial.c | 2 +-
drivers/usb/dwc3/gadget.c | 1 +
drivers/usb/gadget/f_fs.c | 6 +-
drivers/usb/gadget/fsl_mxc_udc.c | 40 ++-
drivers/usb/gadget/fsl_udc_core.c | 42 +--
drivers/usb/gadget/fsl_usb2_udc.h | 5 +-
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-hcd.c | 12 +-
drivers/usb/host/ehci-mxc.c | 120 ++++----
drivers/usb/host/ehci.h | 7 +
drivers/usb/host/uhci-hcd.c | 15 +-
drivers/usb/musb/cppi_dma.c | 4 +-
drivers/usb/serial/io_ti.c | 3 +
drivers/usb/serial/option.c | 9 +-
drivers/vfio/pci/vfio_pci_rdwr.c | 4 +-
drivers/xen/cpu_hotplug.c | 4 +-
drivers/xen/gntdev.c | 130 ++++++---
drivers/xen/grant-table.c | 48 ++--
drivers/xen/privcmd.c | 89 +++---
drivers/xen/xen-pciback/pciback.h | 2 +-
fs/Kconfig | 10 -
fs/btrfs/extent-tree.c | 6 +-
fs/btrfs/extent_map.c | 13 +-
fs/btrfs/extent_map.h | 1 +
fs/btrfs/file-item.c | 4 +-
fs/btrfs/file.c | 10 +-
fs/btrfs/free-space-cache.c | 20 +-
fs/btrfs/inode.c | 137 ++++++---
fs/btrfs/ioctl.c | 129 ++++++---
fs/btrfs/qgroup.c | 20 +-
fs/btrfs/send.c | 4 +-
fs/btrfs/super.c | 2 +-
fs/btrfs/transaction.c | 19 +-
fs/btrfs/tree-log.c | 10 +-
fs/btrfs/volumes.c | 23 +-
fs/cifs/cifs_dfs_ref.c | 2 +
fs/cifs/connect.c | 2 +-
fs/f2fs/acl.c | 13 +-
fs/f2fs/checkpoint.c | 3 +-
fs/f2fs/data.c | 17 +-
fs/f2fs/debug.c | 50 ++--
fs/f2fs/dir.c | 2 +-
fs/f2fs/f2fs.h | 18 +-
fs/f2fs/file.c | 16 +-
fs/f2fs/gc.c | 68 ++---
fs/f2fs/inode.c | 3 +
fs/f2fs/node.c | 19 +-
fs/f2fs/recovery.c | 10 +-
fs/f2fs/segment.c | 2 +-
fs/f2fs/super.c | 97 +++++--
fs/f2fs/xattr.c | 2 +
fs/fuse/Kconfig | 16 +-
fs/fuse/cuse.c | 36 ++-
fs/fuse/dev.c | 5 -
fs/fuse/file.c | 5 +-
include/asm-generic/dma-mapping-broken.h | 16 ++
include/asm-generic/pgtable.h | 6 +-
include/asm-generic/syscalls.h | 2 +
include/linux/ata.h | 8 +-
include/linux/libata.h | 4 +-
include/linux/mmc/card.h | 12 +
include/linux/mmc/core.h | 3 +-
include/linux/mmc/host.h | 25 ++
include/linux/module.h | 10 +-
include/linux/ptrace.h | 1 -
include/linux/sched.h | 11 +-
include/uapi/linux/serial_core.h | 3 +-
init/do_mounts_initrd.c | 4 +
init/main.c | 4 +-
kernel/async.c | 27 +-
kernel/compat.c | 23 +-
kernel/debug/kdb/kdb_main.c | 2 +
kernel/fork.c | 6 +-
kernel/module.c | 154 +++++++---
kernel/ptrace.c | 74 ++++-
kernel/sched/core.c | 3 +-
kernel/signal.c | 24 +-
kernel/trace/ftrace.c | 2 +-
lib/bug.c | 1 +
security/device_cgroup.c | 2 +
security/integrity/evm/evm_crypto.c | 4 +-
sound/pci/hda/hda_codec.c | 5 +-
sound/pci/hda/patch_conexant.c | 9 +
sound/pci/hda/patch_realtek.c | 2 +
tools/perf/MANIFEST | 10 +
tools/perf/Makefile | 2 +-
274 files changed, 3501 insertions(+), 1617 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt
create mode 100644 Documentation/devicetree/bindings/mmc/orion-sdio.txt
create mode 100644 arch/arm/boot/dts/armada-370-rd.dts
create mode 100644 arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
create mode 100644 arch/arm/mach-dove/board-dt.c
create mode 100644 arch/arm/mach-kirkwood/board-guruplug.c
rename arch/arm/mach-kirkwood/cpuidle.c => drivers/cpuidle/cpuidle-kirkwood.c (61%)
create mode 100644 drivers/mmc/host/sdhci-bcm2835.c
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 1/4] ARM: mvebu: cleanup for v3.9
2013-02-01 15:51 [GIT PULL 0/4] ARM: mvebu: changes " Jason Cooper
@ 2013-02-01 15:51 ` Jason Cooper
2013-02-05 7:10 ` Olof Johansson
0 siblings, 1 reply; 23+ messages in thread
From: Jason Cooper @ 2013-02-01 15:51 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit b96e1b1c3c5319294edb0970b6d5bf099c0e85eb:
ARM: Kirkwood: Cleanup unneeded include files
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git tags/cleanup_for_v3.9_round2
for you to fetch changes up to b3af7a1ffd1e5e9ec536a915393b7e07a8793f2a:
ARM: dove: cleanup includes
----------------------------------------------------------------
cleanup for v3.9 round2
- remove unneeded #includes for mach-dove
- remove unneeded #includes and code for the nsa310
----------------------------------------------------------------
Jason Cooper (1):
ARM: kirkwood: nsa310: cleanup includes and unneeded code
Sebastian Hesselbarth (1):
ARM: dove: cleanup includes
arch/arm/mach-dove/common.c | 29 +++++++++--------------------
arch/arm/mach-kirkwood/board-nsa310.c | 8 +-------
2 files changed, 10 insertions(+), 27 deletions(-)
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 1/4] ARM: mvebu: cleanup for v3.9
2013-02-01 15:51 ` [GIT PULL 1/4] ARM: mvebu: cleanup " Jason Cooper
@ 2013-02-05 7:10 ` Olof Johansson
0 siblings, 0 replies; 23+ messages in thread
From: Olof Johansson @ 2013-02-05 7:10 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Feb 01, 2013 at 03:51:58PM +0000, Jason Cooper wrote:
> The following changes since commit b96e1b1c3c5319294edb0970b6d5bf099c0e85eb:
>
> ARM: Kirkwood: Cleanup unneeded include files
>
> are available in the git repository at:
>
> git://git.infradead.org/users/jcooper/linux.git tags/cleanup_for_v3.9_round2
>
> for you to fetch changes up to b3af7a1ffd1e5e9ec536a915393b7e07a8793f2a:
>
> ARM: dove: cleanup includes
Pulled, thanks.
-Olof
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 1/4] ARM: mvebu: cleanup for v3.9
@ 2013-02-16 19:55 Jason Cooper
2013-02-19 17:09 ` Arnd Bergmann
0 siblings, 1 reply; 23+ messages in thread
From: Jason Cooper @ 2013-02-16 19:55 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit b3af7a1ffd1e5e9ec536a915393b7e07a8793f2a:
ARM: dove: cleanup includes (2013-01-31 14:23:21 +0000)
are available in the git repository at:
git://git.infradead.org/users/jcooper/linux.git tags/cleanup_for_v3.9_round3
for you to fetch changes up to 7a87c8ab68d0343fd58bb1249219959a239501bf:
ARM: mvebu: correct gated clock documentation (2013-02-15 20:32:38 +0000)
----------------------------------------------------------------
mvebu cleanup vor v3.9 round3
- fix typo in mvebu clokc gating documentation.
----------------------------------------------------------------
Jason Cooper (1):
ARM: mvebu: correct gated clock documentation
Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 23+ messages in thread
* [GIT PULL 1/4] ARM: mvebu: cleanup for v3.9
2013-02-16 19:55 Jason Cooper
@ 2013-02-19 17:09 ` Arnd Bergmann
0 siblings, 0 replies; 23+ messages in thread
From: Arnd Bergmann @ 2013-02-19 17:09 UTC (permalink / raw)
To: linux-arm-kernel
On Saturday 16 February 2013, Jason Cooper wrote:
> The following changes since commit b3af7a1ffd1e5e9ec536a915393b7e07a8793f2a:
>
> ARM: dove: cleanup includes (2013-01-31 14:23:21 +0000)
>
> are available in the git repository at:
>
> git://git.infradead.org/users/jcooper/linux.git tags/cleanup_for_v3.9_round3
>
> for you to fetch changes up to 7a87c8ab68d0343fd58bb1249219959a239501bf:
>
> ARM: mvebu: correct gated clock documentation (2013-02-15 20:32:38 +0000)
>
> ----------------------------------------------------------------
> mvebu cleanup vor v3.9 round3
>
> - fix typo in mvebu clokc gating documentation.
>
> ----------------------------------------------------------------
> Jason Cooper (1):
> ARM: mvebu: correct gated clock documentation
>
> Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Pulled into next/cleanup, as this is obviously a bug fix for the previous
contents of that branch.
Arnd
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2013-02-19 17:09 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-01-12 23:29 [GIT PULL 0/4] ARM: mvebu: changes for v3.9 Jason Cooper
2013-01-12 23:29 ` [GIT PULL 1/4] ARM: mvebu: cleanup " Jason Cooper
2013-01-12 23:29 ` [GIT PULL 2/4] ARM: mvebu: drivers " Jason Cooper
2013-01-12 23:29 ` [GIT PULL 3/4] ARM: mvebu: boards " Jason Cooper
2013-01-12 23:29 ` [GIT PULL 4/4] ARM: mvebu: dt " Jason Cooper
[not found] ` <E1TuAWu-0004Jx-Hn@merlin.infradead.org>
2013-01-13 1:05 ` [GIT PULL 2/4] ARM: mvebu: drivers " Russell King - ARM Linux
2013-01-13 1:28 ` Jason Cooper
[not found] ` <E1TuAWD-0004Ec-1G@merlin.infradead.org>
2013-01-13 1:06 ` [GIT PULL 3/4] ARM: mvebu: boards " Russell King - ARM Linux
[not found] ` <E1TuAWi-0004H4-K6@merlin.infradead.org>
2013-01-13 1:06 ` [GIT PULL 4/4] ARM: mvebu: dt " Russell King - ARM Linux
2013-01-13 1:30 ` Jason Cooper
2013-01-23 2:48 ` [GIT PULL V2 0/4] ARM: mvebu: changes " Jason Cooper
2013-01-23 2:48 ` [GIT PULL V2 1/4] ARM: mvebu: cleanup " Jason Cooper
2013-01-28 5:57 ` Olof Johansson
2013-01-23 2:48 ` [GIT PULL V2 2/4] ARM: mvebu: drivers " Jason Cooper
2013-01-28 5:53 ` Olof Johansson
2013-01-28 11:53 ` Chris Ball
2013-01-28 16:10 ` Jason Cooper
2013-01-23 2:48 ` [GIT PULL V2 3/4] ARM: mvebu: boards " Jason Cooper
2013-01-23 2:48 ` [GIT PULL V2 4/4] ARM: mvebu: dt " Jason Cooper
2013-02-01 15:51 [GIT PULL 0/4] ARM: mvebu: changes " Jason Cooper
2013-02-01 15:51 ` [GIT PULL 1/4] ARM: mvebu: cleanup " Jason Cooper
2013-02-05 7:10 ` Olof Johansson
2013-02-16 19:55 Jason Cooper
2013-02-19 17:09 ` Arnd Bergmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.