[LARTC] Wondershaper working, but not quite as expected

[LARTC] Wondershaper working, but not quite as expected

[Michael Frotscher]

Hello, LARTC-List

I try to get my traffic-shaping done with Wondershaper 1.1a. When I run
the script, the verbose output looks good (using a SuSE-8.2-box with
iproute2-2.4.7-473):

+ DOWNLINK\x1800
+ UPLINK\x150
+ DEV=ppp0
+ NOPRIOHOSTSRC+ NOPRIOHOSTDST+ NOPRIOPORTSRC+ NOPRIOPORTDST+ '[' '' = status ']'
+ tc qdisc del dev ppp0 root
+ tc qdisc del dev ppp0 ingress
+ '[' '' = stop ']'
+ tc qdisc add dev ppp0 root handle 1: htb default 20
+ tc class add dev ppp0 parent 1: classid 1:1 htb rate 150kbit burst 6k
+ tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 150kbit burst
6k prio 1+ tc class add dev ppp0 parent 1:1 classid 1:20 htb rate
135kbit burst 6k prio 2+ tc class add dev ppp0 parent 1:1 classid 1:30
htb rate 120kbit burst 6k prio 2+ tc qdisc add dev ppp0 parent 1:10
handle 10: sfq perturb 10+ tc qdisc add dev ppp0 parent 1:20 handle 20:
sfq perturb 10+ tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb
10+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip
tos 0x10 0xff flowid 1:10+ tc filter add dev ppp0 parent 1:0 protocol ip
prio 10 u32 match ip protocol 1 0xff flowid 1:10+ tc filter add dev ppp0
parent 1: protocol ip prio 10 u32 match ip protocol 6 0xff match u8 0x05
0x0f at 0 match u16 0x0000 0xffc0 at 2 match u8 0x10 0xff at 33 flowid
1:10+ tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip
dst 0.0.0.0/0 flowid 1:20+ tc qdisc add dev ppp0 handle ffff: ingress
+ tc filter add dev ppp0 parent ffff: protocol ip prio 50 u32 match ip
src 0.0.0.0/0 police rate 1800kbit burst 10k drop flowid :1

My ADSL-Line performs 2MBit down and 192kbit upstream, so I guess the
values are allright. I then start an upload and am pleased to see that
the upload-rate stays at 150kBit, as set. Pings then are fine.

But that upload limit is somehow not really enforced. When starting a
second upload, the total rate (checked with iptraf) exceeds the set
150kBit and is only restricted by the line limit - pings of well over
3 seconds are the result.

What did I do wrong here?
-- 
Cheers,

Michael aka. Tron

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Wondershaper working, but not quite as expected

[Trevor Warren]

Michael,

 Maybe we can help you out much better if you could space out the
sentences below. They seem to be a jigsaw puzzle.

Trevor


On Sat, 2003-07-12 at 20:12, Michael Frotscher wrote:
> Hello, LARTC-List
> 
> I try to get my traffic-shaping done with Wondershaper 1.1a. When I run
> the script, the verbose output looks good (using a SuSE-8.2-box with
> iproute2-2.4.7-473):
> 
> + DOWNLINK\x1800
> + UPLINK\x150
> + DEV=ppp0
> + NOPRIOHOSTSRC> + NOPRIOHOSTDST> + NOPRIOPORTSRC> + NOPRIOPORTDST> + '[' '' = status ']'
> + tc qdisc del dev ppp0 root
> + tc qdisc del dev ppp0 ingress
> + '[' '' = stop ']'
> + tc qdisc add dev ppp0 root handle 1: htb default 20
> + tc class add dev ppp0 parent 1: classid 1:1 htb rate 150kbit burst 6k
> + tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 150kbit burst
> 6k prio 1+ tc class add dev ppp0 parent 1:1 classid 1:20 htb rate
> 135kbit burst 6k prio 2+ tc class add dev ppp0 parent 1:1 classid 1:30
> htb rate 120kbit burst 6k prio 2+ tc qdisc add dev ppp0 parent 1:10
> handle 10: sfq perturb 10+ tc qdisc add dev ppp0 parent 1:20 handle 20:
> sfq perturb 10+ tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb
> 10+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip
> tos 0x10 0xff flowid 1:10+ tc filter add dev ppp0 parent 1:0 protocol ip
> prio 10 u32 match ip protocol 1 0xff flowid 1:10+ tc filter add dev ppp0
> parent 1: protocol ip prio 10 u32 match ip protocol 6 0xff match u8 0x05
> 0x0f at 0 match u16 0x0000 0xffc0 at 2 match u8 0x10 0xff at 33 flowid
> 1:10+ tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip
> dst 0.0.0.0/0 flowid 1:20+ tc qdisc add dev ppp0 handle ffff: ingress
> + tc filter add dev ppp0 parent ffff: protocol ip prio 50 u32 match ip
> src 0.0.0.0/0 police rate 1800kbit burst 10k drop flowid :1
> 
> My ADSL-Line performs 2MBit down and 192kbit upstream, so I guess the
> values are allright. I then start an upload and am pleased to see that
> the upload-rate stays at 150kBit, as set. Pings then are fine.
> 
> But that upload limit is somehow not really enforced. When starting a
> second upload, the total rate (checked with iptraf) exceeds the set
> 150kBit and is only restricted by the line limit - pings of well over
> 3 seconds are the result.
> 
> What did I do wrong here?
-- 
( >-        LINUX, It's all about CHOICE      -< )
/~\    __        twarren@redhat.com       __   /~\
|  \) /  Pre Sales Consultant - Red Hat     \ (/ |
|_|_  \    9820349221(M) | 22881326(O)      / _|_|
       \___________________________________/

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Wondershaper working, but not quite as expected

[Michael Frotscher]

Hallo, Trevor

>  Maybe we can help you out much better if you could space out the
> sentences below. They seem to be a jigsaw puzzle.

Sorry, you are right - I think my word-wrapping is messing this up. I'll
post it again, disregarding line lengths.

This is the verbose output when the script starts:

+ DOWNLINK\x1800
+ UPLINK\x150
+ DEV=ppp0
+ NOPRIOHOSTSRC+ NOPRIOHOSTDST+ NOPRIOPORTSRC+ NOPRIOPORTDST+ '[' '' = status ']'
+ tc qdisc del dev ppp0 root
+ tc qdisc del dev ppp0 ingress
+ '[' '' = stop ']'
+ tc qdisc add dev ppp0 root handle 1: cbq avpkt 1000 bandwidth 10mbit
+ tc class add dev ppp0 parent 1: classid 1:1 cbq rate 150kbit allot 1500 prio 5 bounded isolated
+ tc class add dev ppp0 parent 1:1 classid 1:10 cbq rate 150kbit allot 1600 prio 1 avpkt 1000
+ tc class add dev ppp0 parent 1:1 classid 1:20 cbq rate 135kbit allot 1600 prio 2 avpkt 1000
+ tc class add dev ppp0 parent 1:1 classid 1:30 cbq rate 120kbit allot 1600 prio 2 avpkt 1000
+ tc qdisc add dev ppp0 parent 1:10 handle 10: sfq perturb 10
+ tc qdisc add dev ppp0 parent 1:20 handle 20: sfq perturb 10
+ tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb 10
+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10
+ tc filter add dev ppp0 parent 1:0 protocol ip prio 11 u32 match ip protocol 1 0xff flowid 1:10
+ tc filter add dev ppp0 parent 1: protocol ip prio 12 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 flowid 1:10
+ tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip dst 0.0.0.0/0 flowid 1:20
+ tc qdisc add dev ppp0 handle ffff: ingress
+ tc filter add dev ppp0 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 1800kbit burst 10k drop flowid :1


This is the status information while running:

+ DOWNLINK\x1800
+ UPLINK\x150
+ DEV=ppp0
+ NOPRIOHOSTSRC+ NOPRIOHOSTDST+ NOPRIOPORTSRC+ NOPRIOPORTDST+ '[' status = status ']'
+ tc -s qdisc ls dev ppp0
qdisc ingress ffff:
 Sent 264605 bytes 1195 pkts (dropped 0, overlimits 0)
qdisc sfq 30: limit 128p quantum 1492b perturb 10sec
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc sfq 20: limit 128p quantum 1492b perturb 10sec
 Sent 390490 bytes 610 pkts (dropped 0, overlimits 0)
qdisc sfq 10: limit 128p quantum 1492b perturb 10sec
 Sent 47228 bytes 942 pkts (dropped 0, overlimits 0)
qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
 Sent 437758 bytes 1553 pkts (dropped 0, overlimits 2037)
  borrowed 0 overactions 0 avgidle 624 undertime 0
+ tc -s class ls dev ppp0
class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
 Sent 40 bytes 1 pkts (dropped 0, overlimits 0)
  borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 150Kbit prio 1
 Sent 47288 bytes 943 pkts (dropped 0, overlimits 351)
  borrowed 0 overactions 94 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 150Kbit (bounded,isolated) prio 5
 Sent 437778 bytes 1553 pkts (dropped 0, overlimits 0)
  borrowed 161 overactions 0 avgidle 624 undertime 0
class cbq 1:20 parent 1:1 leaf 20: rate 135Kbit prio 2
 Sent 390490 bytes 610 pkts (dropped 0, overlimits 1868)
  borrowed 161 overactions 263 avgidle 624 undertime 0
class cbq 1:30 parent 1:1 leaf 30: rate 120Kbit prio 2
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
  borrowed 0 overactions 0 avgidle 624 undertime 0
+ exit

I hope this helps.
-- 
Grufl,

Michael aka. Tron

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/