* [PATCH] 2.6.0-test2 ACPI serial discovery tweaks
@ 2003-08-07 17:00 Bjorn Helgaas
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Helgaas @ 2003-08-07 17:00 UTC (permalink / raw)
To: linux-ia64
This patch tweaks the 8250 ACPI namespace discovery to
1) use acpi_walk_resources() to simplify processing the
_CRS data, and
2) add error checking (ioremap failure, lack of MMIO
address in _CRS).
This patch is against the current 2.6.0-test2 BK.
Bjorn
=== drivers/serial/8250_acpi.c 1.1 vs edited ==--- 1.1/drivers/serial/8250_acpi.c Wed May 14 08:50:37 2003
+++ edited/drivers/serial/8250_acpi.c Wed Aug 6 18:20:53 2003
@@ -18,19 +18,25 @@
#include <asm/io.h>
#include <asm/serial.h>
-static void acpi_serial_address(struct serial_struct *req,
- struct acpi_resource_address32 *addr32)
+static acpi_status acpi_serial_address(struct serial_struct *req,
+ struct acpi_resource_address64 *addr)
{
unsigned long size;
- size = addr32->max_address_range - addr32->min_address_range + 1;
- req->iomap_base = addr32->min_address_range;
+ size = addr->max_address_range - addr->min_address_range + 1;
+ req->iomap_base = addr->min_address_range;
req->iomem_base = ioremap(req->iomap_base, size);
+ if (!req->iomem_base) {
+ printk("%s: couldn't ioremap 0x%lx-0x%lx\n", __FUNCTION__,
+ addr->min_address_range, addr->max_address_range);
+ return AE_ERROR;
+ }
req->io_type = SERIAL_IO_MEM;
+ return AE_OK;
}
-static void acpi_serial_irq(struct serial_struct *req,
- struct acpi_resource_ext_irq *ext_irq)
+static acpi_status acpi_serial_irq(struct serial_struct *req,
+ struct acpi_resource_ext_irq *ext_irq)
{
if (ext_irq->number_of_interrupts > 0) {
#ifdef CONFIG_IA64
@@ -40,45 +46,50 @@
req->irq = ext_irq->interrupts[0];
#endif
}
+ return AE_OK;
+}
+
+static acpi_status acpi_serial_resource(struct acpi_resource *res, void *data)
+{
+ struct serial_struct *serial_req = (struct serial_struct *) data;
+ struct acpi_resource_address64 addr;
+ acpi_status status;
+
+ status = acpi_resource_to_address64(res, &addr);
+ if (ACPI_SUCCESS(status))
+ return acpi_serial_address(serial_req, &addr);
+ else if (res->id = ACPI_RSTYPE_EXT_IRQ)
+ return acpi_serial_irq(serial_req, &res->data.extended_irq);
+ return AE_OK;
}
static int acpi_serial_add(struct acpi_device *device)
{
- acpi_status result;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_status status;
struct serial_struct serial_req;
- int line, offset = 0;
+ int line;
memset(&serial_req, 0, sizeof(serial_req));
- result = acpi_get_current_resources(device->handle, &buffer);
- if (ACPI_FAILURE(result)) {
- result = -ENODEV;
- goto out;
- }
- while (offset <= buffer.length) {
- struct acpi_resource *res = buffer.pointer + offset;
- if (res->length = 0)
- break;
- offset += res->length;
- if (res->id = ACPI_RSTYPE_ADDRESS32) {
- acpi_serial_address(&serial_req, &res->data.address32);
- } else if (res->id = ACPI_RSTYPE_EXT_IRQ) {
- acpi_serial_irq(&serial_req, &res->data.extended_irq);
- }
+ status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+ acpi_serial_resource, &serial_req);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ if (!serial_req.iomem_base) {
+ printk("%s: no iomem address in %s _CRS\n", __FUNCTION__,
+ device->pnp.bus_id);
+ return -ENODEV;
}
serial_req.baud_base = BASE_BAUD;
serial_req.flags = ASYNC_SKIP_TEST|ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ;
- result = 0;
line = register_serial(&serial_req);
if (line < 0)
- result = -ENODEV;
+ return -ENODEV;
- out:
- acpi_os_free(buffer.pointer);
- return result;
+ return 0;
}
static int acpi_serial_remove(struct acpi_device *device, int type)
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH] 2.6.0-test2 ACPI serial discovery tweaks
@ 2003-08-07 17:00 Bjorn Helgaas
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Helgaas @ 2003-08-07 17:00 UTC (permalink / raw)
To: tytso; +Cc: linux-serial, linux-ia64
This patch tweaks the 8250 ACPI namespace discovery to
1) use acpi_walk_resources() to simplify processing the
_CRS data, and
2) add error checking (ioremap failure, lack of MMIO
address in _CRS).
This patch is against the current 2.6.0-test2 BK.
Bjorn
===== drivers/serial/8250_acpi.c 1.1 vs edited =====
--- 1.1/drivers/serial/8250_acpi.c Wed May 14 08:50:37 2003
+++ edited/drivers/serial/8250_acpi.c Wed Aug 6 18:20:53 2003
@@ -18,19 +18,25 @@
#include <asm/io.h>
#include <asm/serial.h>
-static void acpi_serial_address(struct serial_struct *req,
- struct acpi_resource_address32 *addr32)
+static acpi_status acpi_serial_address(struct serial_struct *req,
+ struct acpi_resource_address64 *addr)
{
unsigned long size;
- size = addr32->max_address_range - addr32->min_address_range + 1;
- req->iomap_base = addr32->min_address_range;
+ size = addr->max_address_range - addr->min_address_range + 1;
+ req->iomap_base = addr->min_address_range;
req->iomem_base = ioremap(req->iomap_base, size);
+ if (!req->iomem_base) {
+ printk("%s: couldn't ioremap 0x%lx-0x%lx\n", __FUNCTION__,
+ addr->min_address_range, addr->max_address_range);
+ return AE_ERROR;
+ }
req->io_type = SERIAL_IO_MEM;
+ return AE_OK;
}
-static void acpi_serial_irq(struct serial_struct *req,
- struct acpi_resource_ext_irq *ext_irq)
+static acpi_status acpi_serial_irq(struct serial_struct *req,
+ struct acpi_resource_ext_irq *ext_irq)
{
if (ext_irq->number_of_interrupts > 0) {
#ifdef CONFIG_IA64
@@ -40,45 +46,50 @@
req->irq = ext_irq->interrupts[0];
#endif
}
+ return AE_OK;
+}
+
+static acpi_status acpi_serial_resource(struct acpi_resource *res, void *data)
+{
+ struct serial_struct *serial_req = (struct serial_struct *) data;
+ struct acpi_resource_address64 addr;
+ acpi_status status;
+
+ status = acpi_resource_to_address64(res, &addr);
+ if (ACPI_SUCCESS(status))
+ return acpi_serial_address(serial_req, &addr);
+ else if (res->id == ACPI_RSTYPE_EXT_IRQ)
+ return acpi_serial_irq(serial_req, &res->data.extended_irq);
+ return AE_OK;
}
static int acpi_serial_add(struct acpi_device *device)
{
- acpi_status result;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_status status;
struct serial_struct serial_req;
- int line, offset = 0;
+ int line;
memset(&serial_req, 0, sizeof(serial_req));
- result = acpi_get_current_resources(device->handle, &buffer);
- if (ACPI_FAILURE(result)) {
- result = -ENODEV;
- goto out;
- }
- while (offset <= buffer.length) {
- struct acpi_resource *res = buffer.pointer + offset;
- if (res->length == 0)
- break;
- offset += res->length;
- if (res->id == ACPI_RSTYPE_ADDRESS32) {
- acpi_serial_address(&serial_req, &res->data.address32);
- } else if (res->id == ACPI_RSTYPE_EXT_IRQ) {
- acpi_serial_irq(&serial_req, &res->data.extended_irq);
- }
+ status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+ acpi_serial_resource, &serial_req);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ if (!serial_req.iomem_base) {
+ printk("%s: no iomem address in %s _CRS\n", __FUNCTION__,
+ device->pnp.bus_id);
+ return -ENODEV;
}
serial_req.baud_base = BASE_BAUD;
serial_req.flags = ASYNC_SKIP_TEST|ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ;
- result = 0;
line = register_serial(&serial_req);
if (line < 0)
- result = -ENODEV;
+ return -ENODEV;
- out:
- acpi_os_free(buffer.pointer);
- return result;
+ return 0;
}
static int acpi_serial_remove(struct acpi_device *device, int type)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-08-07 17:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-08-07 17:00 [PATCH] 2.6.0-test2 ACPI serial discovery tweaks Bjorn Helgaas
2003-08-07 17:00 Bjorn Helgaas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.