From: Palmer Dabbelt <palmer@dabbelt.com> To: heinrich.schuchardt@canonical.com Cc: Paul Walmsley <paul.walmsley@sifive.com>, aou@eecs.berkeley.edu, Anup Patel <Anup.Patel@wdc.com>, axboe@kernel.dk, sagar.kadam@sifive.com, Atish Patra <Atish.Patra@wdc.com>, linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, heinrich.schuchardt@canonical.com Subject: Re: [PATCH 1/1] riscv: defconfig: enable DRM_NOUVEAU Date: Tue, 26 Oct 2021 16:57:08 -0700 (PDT) [thread overview] Message-ID: <mhng-5dc2aa26-9f1c-4764-9877-6d99569210b4@palmerdabbelt-glaptop> (raw) In-Reply-To: <20211012164658.81894-1-heinrich.schuchardt@canonical.com> On Tue, 12 Oct 2021 09:46:58 PDT (-0700), heinrich.schuchardt@canonical.com wrote: > Both RADEON and NOUVEAU graphics cards are supported on RISC-V. Enabling > the one and not the other does not make sense. > > As typically at most one of RADEON, NOUVEAU, or VIRTIO GPU support will be > needed DRM drivers should be compiled as modules. Do you have an nVidia card that works on real hardware? Last I checked was a while ago, but they weren't working at the time (IIRC it was something to do with PCIe addressing, but it was a hardware limitation so I don't remember exactly how it all fits together). If they work then I'm happy to flip them on. > Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> > --- > arch/riscv/configs/defconfig | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig > index 4ebc80315f01..c252fd5706d2 100644 > --- a/arch/riscv/configs/defconfig > +++ b/arch/riscv/configs/defconfig > @@ -72,9 +72,10 @@ CONFIG_GPIOLIB=y > CONFIG_GPIO_SIFIVE=y > # CONFIG_PTP_1588_CLOCK is not set > CONFIG_POWER_RESET=y > -CONFIG_DRM=y > -CONFIG_DRM_RADEON=y > -CONFIG_DRM_VIRTIO_GPU=y > +CONFIG_DRM=m > +CONFIG_DRM_RADEON=m > +CONFIG_DRM_NOUVEAU=m > +CONFIG_DRM_VIRTIO_GPU=m > CONFIG_FRAMEBUFFER_CONSOLE=y > CONFIG_USB=y > CONFIG_USB_XHCI_HCD=y
WARNING: multiple messages have this Message-ID (diff)
From: Palmer Dabbelt <palmer@dabbelt.com> To: heinrich.schuchardt@canonical.com Cc: Paul Walmsley <paul.walmsley@sifive.com>, aou@eecs.berkeley.edu, Anup Patel <Anup.Patel@wdc.com>, axboe@kernel.dk, sagar.kadam@sifive.com, Atish Patra <Atish.Patra@wdc.com>, linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, heinrich.schuchardt@canonical.com Subject: Re: [PATCH 1/1] riscv: defconfig: enable DRM_NOUVEAU Date: Tue, 26 Oct 2021 16:57:08 -0700 (PDT) [thread overview] Message-ID: <mhng-5dc2aa26-9f1c-4764-9877-6d99569210b4@palmerdabbelt-glaptop> (raw) In-Reply-To: <20211012164658.81894-1-heinrich.schuchardt@canonical.com> On Tue, 12 Oct 2021 09:46:58 PDT (-0700), heinrich.schuchardt@canonical.com wrote: > Both RADEON and NOUVEAU graphics cards are supported on RISC-V. Enabling > the one and not the other does not make sense. > > As typically at most one of RADEON, NOUVEAU, or VIRTIO GPU support will be > needed DRM drivers should be compiled as modules. Do you have an nVidia card that works on real hardware? Last I checked was a while ago, but they weren't working at the time (IIRC it was something to do with PCIe addressing, but it was a hardware limitation so I don't remember exactly how it all fits together). If they work then I'm happy to flip them on. > Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> > --- > arch/riscv/configs/defconfig | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig > index 4ebc80315f01..c252fd5706d2 100644 > --- a/arch/riscv/configs/defconfig > +++ b/arch/riscv/configs/defconfig > @@ -72,9 +72,10 @@ CONFIG_GPIOLIB=y > CONFIG_GPIO_SIFIVE=y > # CONFIG_PTP_1588_CLOCK is not set > CONFIG_POWER_RESET=y > -CONFIG_DRM=y > -CONFIG_DRM_RADEON=y > -CONFIG_DRM_VIRTIO_GPU=y > +CONFIG_DRM=m > +CONFIG_DRM_RADEON=m > +CONFIG_DRM_NOUVEAU=m > +CONFIG_DRM_VIRTIO_GPU=m > CONFIG_FRAMEBUFFER_CONSOLE=y > CONFIG_USB=y > CONFIG_USB_XHCI_HCD=y _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2021-10-26 23:57 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-12 16:46 [PATCH 1/1] riscv: defconfig: enable DRM_NOUVEAU Heinrich Schuchardt 2021-10-12 16:46 ` Heinrich Schuchardt 2021-10-26 23:57 ` Palmer Dabbelt [this message] 2021-10-26 23:57 ` Palmer Dabbelt 2021-10-27 2:31 ` Damien Le Moal 2021-10-27 2:31 ` Damien Le Moal 2021-10-27 7:31 ` Heinrich Schuchardt 2021-10-27 7:31 ` Heinrich Schuchardt 2021-10-27 22:12 ` Palmer Dabbelt 2021-10-27 22:12 ` Palmer Dabbelt 2021-10-27 15:44 ` Adam Borowski 2021-10-27 15:44 ` Adam Borowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=mhng-5dc2aa26-9f1c-4764-9877-6d99569210b4@palmerdabbelt-glaptop \ --to=palmer@dabbelt.com \ --cc=Anup.Patel@wdc.com \ --cc=Atish.Patra@wdc.com \ --cc=aou@eecs.berkeley.edu \ --cc=axboe@kernel.dk \ --cc=heinrich.schuchardt@canonical.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=paul.walmsley@sifive.com \ --cc=sagar.kadam@sifive.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.