* [xen-unstable-smoke test] 150488: regressions - trouble: blocked/fail
@ 2020-05-29 15:15 osstest service owner
0 siblings, 0 replies; only message in thread
From: osstest service owner @ 2020-05-29 15:15 UTC (permalink / raw)
To: xen-devel, osstest-admin
flight 150488 xen-unstable-smoke real [real]
http://logs.test-lab.xenproject.org/osstest/logs/150488/
Regressions :-(
Tests which did not succeed and are blocking,
including tests which could not be run:
build-arm64-xsm 6 xen-build fail REGR. vs. 150438
build-amd64 6 xen-build fail REGR. vs. 150438
build-armhf 6 xen-build fail REGR. vs. 150438
Tests which did not succeed, but are not blocking:
build-amd64-libvirt 1 build-check(1) blocked n/a
test-amd64-amd64-xl-qemuu-debianhvm-amd64 1 build-check(1) blocked n/a
test-arm64-arm64-xl-xsm 1 build-check(1) blocked n/a
test-armhf-armhf-xl 1 build-check(1) blocked n/a
test-amd64-amd64-libvirt 1 build-check(1) blocked n/a
version targeted for testing:
xen 9b9a83e43598b231111487378d6037fa8fa473d5
baseline version:
xen 1497e78068421d83956f8e82fb6e1bf1fc3b1199
Last test of basis 150438 2020-05-28 14:01:19 Z 1 days
Failing since 150465 2020-05-29 09:02:14 Z 0 days 5 attempts
Testing same since 150472 2020-05-29 11:01:58 Z 0 days 3 attempts
------------------------------------------------------------
People who touched revisions under test:
Jan Beulich <jbeulich@suse.com>
Juergen Gross <jgross@suse.com>
Julien Grall <jgrall@amazon.com>
Wei Liu <wl@xen.org>
jobs:
build-arm64-xsm fail
build-amd64 fail
build-armhf fail
build-amd64-libvirt blocked
test-armhf-armhf-xl blocked
test-arm64-arm64-xl-xsm blocked
test-amd64-amd64-xl-qemuu-debianhvm-amd64 blocked
test-amd64-amd64-libvirt blocked
------------------------------------------------------------
sg-report-flight on osstest.test-lab.xenproject.org
logs: /home/logs/logs
images: /home/logs/images
Logs, config files, etc. are available at
http://logs.test-lab.xenproject.org/osstest/logs
Explanation of these reports, and of osstest in general, is at
http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master
http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master
Test harness code can be found at
http://xenbits.xen.org/gitweb?p=osstest.git;a=summary
Not pushing.
------------------------------------------------------------
commit 9b9a83e43598b231111487378d6037fa8fa473d5
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 12:22:50 2020 +0200
SUPPORT.md: add hypervisor file system
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
commit 7f8d2dc29ea5a51f88ec253be93970768ec9fac2
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 12:22:42 2020 +0200
CHANGELOG: add hypervisor file system support
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
commit 02e9a9cf20950e78c816987415ed920d72444f94
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 12:20:31 2020 +0200
xen: remove XEN_SYSCTL_set_parameter support
The functionality of XEN_SYSCTL_set_parameter is available via hypfs
now, so it can be removed.
This allows to remove the kernel_param structure for runtime parameters
by putting the now only used structure element into the hypfs node
structure of the runtime parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
commit a2486890689713116351e5bbfb8f104c797479cc
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 12:20:16 2020 +0200
tools/libxc: remove xc_set_parameters()
There is no user of xc_set_parameters() left, so remove it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
commit 2ea4b9829cf95b59f75f0c70543f2368d702305e
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 12:20:08 2020 +0200
tools/libxl: use libxenhypfs for setting xen runtime parameters
Instead of xc_set_parameters() use xenhypfs_write() for setting
parameters of the hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
commit a659d7cab9afcba337cb60225738fd85ff7aa3da
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 12:18:36 2020 +0200
xen: add runtime parameter access support to hypfs
Add support to read and modify values of hypervisor runtime parameters
via the hypervisor file system.
As runtime parameters can be modified via a sysctl, too, this path has
to take the hypfs rw_lock as writer.
For custom runtime parameters the connection between the parameter
value and the file system is done via an init function which will set
the initial value (if needed) and the leaf properties.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
commit 58263ed7713e8132c2bc00bc870399ea31bf2231
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 12:15:54 2020 +0200
xen: add /buildinfo/config entry to hypervisor filesystem
Add the /buildinfo/config entry to the hypervisor filesystem. This
entry contains the .config file used to build the hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
commit b5d4711d2b17753498a3f587585f11bf9ca5af85
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 12:14:51 2020 +0200
xen: provide version information in hypfs
Provide version and compile information in /buildinfo/ node of the
Xen hypervisor file system. As this information is accessible by dom0
only no additional security problem arises.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
commit 048f82ccd1b3dda511af25a7a8524c8ba5ca2786
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 12:14:24 2020 +0200
xen/hypfs: make struct hypfs_entry_leaf initializers work with gcc 4.1
gcc 4.1 has problems with static initializers for anonymous unions.
Fix this by naming the union in struct hypfs_entry_leaf.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Jan Beulich <jbeulich@suse.com>
commit ef716e1dc6206adc5e2a181fe0e20dfd6072bf4c
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 10:20:32 2020 +0200
tools: add xenfs tool
Add the xenfs tool for accessing the hypervisor filesystem.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
commit 86234eafb95295621aef6c618e4c22c10d8e4138
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 10:20:21 2020 +0200
libs: add libxenhypfs
Add the new library libxenhypfs for access to the hypervisor filesystem.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
commit 5b5ccafb0c425b85a60fd4f241d5f6951d0e4928
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 10:15:50 2020 +0200
xen: add basic hypervisor filesystem support
Add the infrastructure for the hypervisor filesystem.
This includes the hypercall interface and the base functions for
entry creation, deletion and modification.
In order not to have to repeat the same pattern multiple times in case
adding a new node should BUG_ON() failure, the helpers for adding a
node (hypfs_add_dir() and hypfs_add_leaf()) get a nofault parameter
causing the BUG() in case of a failure.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
commit 0e9dcd0159c671608e154da5b8b7e0edd2905067
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 10:15:35 2020 +0200
docs: add feature document for Xen hypervisor sysfs-like support
On the 2019 Xen developer summit there was agreement that the Xen
hypervisor should gain support for a hierarchical name-value store
similar to the Linux kernel's sysfs.
In the beginning there should only be basic support: entries can be
added from the hypervisor itself only, there is a simple hypercall
interface to read the data.
Add a feature document for setting the base of a discussion regarding
the desired functionality and the entries to add.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
commit c48a9956e334a5dd99e846d04ad56185b07aab64
Author: Juergen Gross <jgross@suse.com>
Date: Fri May 29 10:15:08 2020 +0200
xen: add a generic way to include binary files as variables
Add a new script xen/tools/binfile for including a binary file at build
time being usable via a pointer and a size variable in the hypervisor.
Make use of that generic tool in xsm.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
(qemu changes not included)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2020-05-29 15:16 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-29 15:15 [xen-unstable-smoke test] 150488: regressions - trouble: blocked/fail osstest service owner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.