* [ovmf baseline-only test] 67711: all pass
@ 2016-09-14 14:24 Platform Team regression test user
0 siblings, 0 replies; only message in thread
From: Platform Team regression test user @ 2016-09-14 14:24 UTC (permalink / raw)
To: xen-devel, osstest-admin
This run is configured for baseline tests only.
flight 67711 ovmf real [real]
http://osstest.xs.citrite.net/~osstest/testlogs/logs/67711/
Perfect :-)
All tests in this flight passed as required
version targeted for testing:
ovmf 18b00c8c8773e62b1e2c4a36f490996325570b67
baseline version:
ovmf d947fbed72226011961e5e2691f09baebf128795
Last test of basis 67709 2016-09-14 05:54:11 Z 0 days
Testing same since 67711 2016-09-14 12:46:15 Z 0 days 1 attempts
------------------------------------------------------------
People who touched revisions under test:
Jeff Fan <jeff.fan@intel.com>
lushifex <shifeix.a.lu@intel.com>
jobs:
build-amd64-xsm pass
build-i386-xsm pass
build-amd64 pass
build-i386 pass
build-amd64-libvirt pass
build-i386-libvirt pass
build-amd64-pvops pass
build-i386-pvops pass
test-amd64-amd64-xl-qemuu-ovmf-amd64 pass
test-amd64-i386-xl-qemuu-ovmf-amd64 pass
------------------------------------------------------------
sg-report-flight on osstest.xs.citrite.net
logs: /home/osstest/logs
images: /home/osstest/images
Logs, config files, etc. are available at
http://osstest.xs.citrite.net/~osstest/testlogs/logs
Test harness code can be found at
http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary
Push not applicable.
------------------------------------------------------------
commit 18b00c8c8773e62b1e2c4a36f490996325570b67
Author: lushifex <shifeix.a.lu@intel.com>
Date: Thu Sep 1 13:02:55 2016 +0800
Vlv2TbltDevicePkg:Signal End of Dxe Event.
According to PI spec,DxeSmmReadyToLock protocol is published immediately after signaling of the End of Dxe Event.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: lushifex <shifeix.a.lu@intel.com>
commit 8a5b8cef678711060cc9014e0fac1886839de943
Author: Jeff Fan <jeff.fan@intel.com>
Date: Fri Sep 9 15:14:32 2016 +0800
UefiCpuPkg/SecCore: Re-install SEC platform information(2) PPI
In SecTemporaryRamDone(), we will build one privated GUIDed-HOB to save CPU BIST
Data and re-install SEC platform information(2) PPI. Then other PEI drivers
could get CPU BIST data from the private GUIDed-HOB by new installed PPI.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
commit d157de8b5603fb24feed6ec7b46be8677083c25a
Author: Jeff Fan <jeff.fan@intel.com>
Date: Fri Sep 9 15:08:56 2016 +0800
UefiCpuPkg/SecCore: Abstract worker function GetBistFromHob()
Abstract one worker function to get CPU BIST from the GUIDed-HOB. Add
SecPlatformInformationBist() and SecPlatformInformation2Bist() to invoke
GetBistFromHob(). Add in/out for parameter in function header.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
commit 863c738c4af0d200c8789e4786e1722e07f407fa
Author: Jeff Fan <jeff.fan@intel.com>
Date: Fri Sep 9 15:00:30 2016 +0800
UefiCpuPkg/SecCore: Add SecBist.c
Add SecBist.c and copy GetBistInfoFromPpi() and SecPlatformInformation2() from
UefiCpuPkg/CpuMpPei/CpuBist.c. And update SecMain.c, SecMain.inf and
UefiCpuPkg.dsc accordinlgy to pass build.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
commit 8643299420ed5e8305eebda669c68672266096ff
Author: Jeff Fan <jeff.fan@intel.com>
Date: Fri Sep 9 14:36:39 2016 +0800
UefiCpuPkg/CpuMpPei: Build GUIDed-HOB to store all CPU BIST Data
Build gEfiSecPlatformInformation2PpiGuid GUIDed-HOB to store all CPU BIST data
that could be used not only by SecPlatformInformation2(), but also by CPU MP Dxe
driver to get CPU BIST data.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
commit 8dc56ddeca490999ee0e256c4f2c42e7cb20a84d
Author: Jeff Fan <jeff.fan@intel.com>
Date: Fri Sep 9 14:17:57 2016 +0800
UefiCpuPkg/CpuMpPei: Fix BistData ouput error
ProcessorInfo.ProcessorId is UINT64 type even it's valid value is UINT32. Use %x
only output the low 4 bytes and keep the high 4 bytes in stack that will be
output as the second parameter BistData. Typecast ProcessorInfo.ProcessorId to
UINT32 could make BistData output correctly.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
commit dfb0e6591b31f894cc6abfc028ddcd1a161dbb48
Author: Jeff Fan <jeff.fan@intel.com>
Date: Fri Sep 9 14:08:33 2016 +0800
UefiCpuPkg/CpuMpPei: Add parameter BistInformationSize
Add one OPTIONAL parameter BistInformationSize for GetBistInfoFromPpi().
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
commit 7d17ab47d1d81c8012d8095c1e17412168c1cfc9
Author: Jeff Fan <jeff.fan@intel.com>
Date: Fri Sep 9 13:39:50 2016 +0800
UefiCpuPkg/CpuDxe: Fix duplicated status code report
If CPU Bist data is not zero, we will report Status code. But there is one bug
that will report each processor's status code duplicated with NumberOfData
times. This fix is to exchange the loop order on NumberOfData and
mNumberOfProcessors. It could make sure the report status code only once for
each processor.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-09-14 14:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-14 14:24 [ovmf baseline-only test] 67711: all pass Platform Team regression test user
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.