* [GIT PULL 1/3] ti-sysc driver changes for v4.18 merge window
@ 2018-05-04 16:17 ` Tony Lindgren
0 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2018-05-04 16:17 UTC (permalink / raw)
To: arm; +Cc: Tony Lindgren, linux-omap, linux-arm-kernel
From: "Tony Lindgren" <tony@atomide.com>
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/ti-sysc-signed
for you to fetch changes up to dc4c85eac6bc8cfe25144936c5636aa1415bbc12:
bus: ti-sysc: Show module information for suspend if DEBUG is enabled (2018-05-01 06:54:17 -0700)
----------------------------------------------------------------
ti-sysc driver related changes for omap variants
This series improves the ti-sysc interconnect target module driver to
the point where a most of SoC can be booted with interconnect target
module data configured in device tree instead of legacy platform data.
The related device tree changes need some more work though, and can
wait for v4.19. Also some drivers using nested interconnects like DSS
need more work.
We can now remove the unused pm-noop code that is not doing anything
any longer. And we can now initialize things for PM and display pdata
later to prepare things for using ti-sysc driver.
We also need to add some more quirk handling so we can boot both with
platform data and dts data.
----------------------------------------------------------------
Tony Lindgren (16):
ARM: OMAP2+: Drop unused pm-noop
ARM: OMAP2+: Allow using ti-sysc for system timers
ARM: OMAP2+: Use signed value for sysc register offsets
ARM: OMAP2+: Only probe SDMA via ti-sysc if configured in dts
ARM: OMAP2+: Initialize SoC PM later
ARM: OMAP2+: Make display related init into device_initcall
bus: ti-sysc: Handle simple-bus for nested children
bus: ti-sysc: Make child clock alias handling more generic
bus: ti-sysc: Add handling for clkctrl opt clocks
bus: ti-sysc: Tag some modules resource providers for noirq suspend
bus: ti-sysc: Improve suspend and resume handling
bus: ti-sysc: Add initial support for external resets
bus: ti-sysc: Detect omap4 type timers for quirk
bus: ti-sysc: Detect UARTs for SYSC_QUIRK_LEGACY_IDLE quirk on omap4
bus: ti-sysc: Tag sdio and wdt with legacy mode for suspend
bus: ti-sysc: Show module information for suspend if DEBUG is enabled
Documentation/devicetree/bindings/bus/ti-sysc.txt | 6 +-
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/board-generic.c | 2 -
arch/arm/mach-omap2/common.h | 18 +-
arch/arm/mach-omap2/display.c | 10 +-
arch/arm/mach-omap2/hsmmc.c | 1 -
arch/arm/mach-omap2/i2c.c | 1 -
arch/arm/mach-omap2/io.c | 70 +---
arch/arm/mach-omap2/omap-pm-noop.c | 176 ----------
arch/arm/mach-omap2/omap-pm.h | 161 ---------
arch/arm/mach-omap2/omap_device.c | 22 +-
arch/arm/mach-omap2/omap_hwmod.c | 21 +-
arch/arm/mach-omap2/omap_hwmod.h | 6 +-
.../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 1 +
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 +
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 1 +
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 4 +
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 3 +
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 6 +
arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 1 +
arch/arm/mach-omap2/pdata-quirks.c | 15 -
arch/arm/mach-omap2/pm-debug.c | 5 -
arch/arm/mach-omap2/pm.c | 21 +-
arch/arm/mach-omap2/pm33xx-core.c | 4 +-
arch/arm/mach-omap2/timer.c | 68 +++-
arch/arm/plat-omap/Kconfig | 10 -
drivers/bus/ti-sysc.c | 388 ++++++++++++++++++---
drivers/media/rc/ir-rx51.c | 17 +-
include/linux/platform_data/media/ir-rx51.h | 9 -
include/linux/platform_data/ti-sysc.h | 1 +
30 files changed, 494 insertions(+), 559 deletions(-)
delete mode 100644 arch/arm/mach-omap2/omap-pm-noop.c
delete mode 100644 arch/arm/mach-omap2/omap-pm.h
delete mode 100644 include/linux/platform_data/media/ir-rx51.h
^ permalink raw reply [flat|nested] 18+ messages in thread* [GIT PULL 1/3] ti-sysc driver changes for v4.18 merge window
@ 2018-05-04 16:17 ` Tony Lindgren
0 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2018-05-04 16:17 UTC (permalink / raw)
To: linux-arm-kernel
From: "Tony Lindgren" <tony@atomide.com>
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/ti-sysc-signed
for you to fetch changes up to dc4c85eac6bc8cfe25144936c5636aa1415bbc12:
bus: ti-sysc: Show module information for suspend if DEBUG is enabled (2018-05-01 06:54:17 -0700)
----------------------------------------------------------------
ti-sysc driver related changes for omap variants
This series improves the ti-sysc interconnect target module driver to
the point where a most of SoC can be booted with interconnect target
module data configured in device tree instead of legacy platform data.
The related device tree changes need some more work though, and can
wait for v4.19. Also some drivers using nested interconnects like DSS
need more work.
We can now remove the unused pm-noop code that is not doing anything
any longer. And we can now initialize things for PM and display pdata
later to prepare things for using ti-sysc driver.
We also need to add some more quirk handling so we can boot both with
platform data and dts data.
----------------------------------------------------------------
Tony Lindgren (16):
ARM: OMAP2+: Drop unused pm-noop
ARM: OMAP2+: Allow using ti-sysc for system timers
ARM: OMAP2+: Use signed value for sysc register offsets
ARM: OMAP2+: Only probe SDMA via ti-sysc if configured in dts
ARM: OMAP2+: Initialize SoC PM later
ARM: OMAP2+: Make display related init into device_initcall
bus: ti-sysc: Handle simple-bus for nested children
bus: ti-sysc: Make child clock alias handling more generic
bus: ti-sysc: Add handling for clkctrl opt clocks
bus: ti-sysc: Tag some modules resource providers for noirq suspend
bus: ti-sysc: Improve suspend and resume handling
bus: ti-sysc: Add initial support for external resets
bus: ti-sysc: Detect omap4 type timers for quirk
bus: ti-sysc: Detect UARTs for SYSC_QUIRK_LEGACY_IDLE quirk on omap4
bus: ti-sysc: Tag sdio and wdt with legacy mode for suspend
bus: ti-sysc: Show module information for suspend if DEBUG is enabled
Documentation/devicetree/bindings/bus/ti-sysc.txt | 6 +-
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/board-generic.c | 2 -
arch/arm/mach-omap2/common.h | 18 +-
arch/arm/mach-omap2/display.c | 10 +-
arch/arm/mach-omap2/hsmmc.c | 1 -
arch/arm/mach-omap2/i2c.c | 1 -
arch/arm/mach-omap2/io.c | 70 +---
arch/arm/mach-omap2/omap-pm-noop.c | 176 ----------
arch/arm/mach-omap2/omap-pm.h | 161 ---------
arch/arm/mach-omap2/omap_device.c | 22 +-
arch/arm/mach-omap2/omap_hwmod.c | 21 +-
arch/arm/mach-omap2/omap_hwmod.h | 6 +-
.../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 1 +
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 +
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 1 +
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 4 +
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 3 +
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 6 +
arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 1 +
arch/arm/mach-omap2/pdata-quirks.c | 15 -
arch/arm/mach-omap2/pm-debug.c | 5 -
arch/arm/mach-omap2/pm.c | 21 +-
arch/arm/mach-omap2/pm33xx-core.c | 4 +-
arch/arm/mach-omap2/timer.c | 68 +++-
arch/arm/plat-omap/Kconfig | 10 -
drivers/bus/ti-sysc.c | 388 ++++++++++++++++++---
drivers/media/rc/ir-rx51.c | 17 +-
include/linux/platform_data/media/ir-rx51.h | 9 -
include/linux/platform_data/ti-sysc.h | 1 +
30 files changed, 494 insertions(+), 559 deletions(-)
delete mode 100644 arch/arm/mach-omap2/omap-pm-noop.c
delete mode 100644 arch/arm/mach-omap2/omap-pm.h
delete mode 100644 include/linux/platform_data/media/ir-rx51.h
^ permalink raw reply [flat|nested] 18+ messages in thread* [GIT PULL 2/3] omap dts changes for v4.18 merge window
2018-05-04 16:17 ` Tony Lindgren
@ 2018-05-04 16:17 ` Tony Lindgren
-1 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2018-05-04 16:17 UTC (permalink / raw)
To: arm; +Cc: Tony Lindgren, linux-omap, linux-arm-kernel
From: "Tony Lindgren" <tony@atomide.com>
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-signed
for you to fetch changes up to 8dfa75524a0e0e2b4eaf2a3dc178f6b4d8db85d9:
ARM: dts: correct invalid I/O definition for MMC/SD card detect on T410 (2018-05-03 10:03:01 -0700)
----------------------------------------------------------------
Device tree changes for omap variants for v4.18 merge window
This series adds support for am335x-pockebeagle and also add missing
pinctrl configuration for am335x evm and beagle bone variants.
There are also changes to add missing omap3 oscillator clocks for audio,
and fixes am437x tps65218 irq type used for various board specific
files.
There are also few minor fixes included that are not urgent. The
fixes for n8x0 audio also depend on driver changes, and the hp t410
mmc card detect mux typo is harmless.
----------------------------------------------------------------
Adam Ford (1):
ARM: dts: logicpd-som-lv: Enable Touchscreen controller
Faiz Abbas (1):
ARM: dts: am33xx: Add pinmux data for mmc1 in am335x-evm, evmsk and beaglebone
Graeme Smecher (1):
ARM: dts: correct invalid I/O definition for MMC/SD card detect on T410
H. Nikolaus Schaller (2):
ARM: dts: omap3-pandora: Add fixed 26MHz clock as fck for twl
ARM: dts: omap3-gta04: Add fixed 26MHz clock as fck for twl
Peter Ujfalusi (7):
ARM: dts: omap3-beagle-xm: Add fixed 26MHz clock as fck for twl
ARM: dts: am437x-gp-evm: Correct tps65218 irq type
ARM: dts: am437x-cm-t43: Correct tps65218 irq type
ARM: dts: am437x-epos-evm: Correct tps65218 irq type
ARM: dts: am437x-sk-evm: Correct tps65218 irq type
ARM: dts: omap2420-n810: Enable McBSP2 for audio
ARM: dts: omap2420-n810: Correct the audio codec (tlv320aic33) node
Robert Nelson (1):
ARM: dts: Add am335x-pocketbeagle
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/am335x-bone-common.dtsi | 9 +-
arch/arm/boot/dts/am335x-evm.dts | 9 +-
arch/arm/boot/dts/am335x-evmsk.dts | 9 +-
arch/arm/boot/dts/am335x-osd335x-common.dtsi | 124 ++++++++++++++
arch/arm/boot/dts/am335x-pocketbeagle.dts | 237 +++++++++++++++++++++++++++
arch/arm/boot/dts/am437x-cm-t43.dts | 2 +-
arch/arm/boot/dts/am437x-gp-evm.dts | 2 +-
arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
arch/arm/boot/dts/dm8148-t410.dts | 2 +-
arch/arm/boot/dts/logicpd-som-lv.dtsi | 25 +++
arch/arm/boot/dts/omap2420-n810.dts | 63 ++++++-
arch/arm/boot/dts/omap3-beagle-xm.dts | 10 ++
arch/arm/boot/dts/omap3-gta04.dtsi | 10 ++
arch/arm/boot/dts/omap3-pandora-common.dtsi | 10 ++
16 files changed, 507 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/boot/dts/am335x-osd335x-common.dtsi
create mode 100644 arch/arm/boot/dts/am335x-pocketbeagle.dts
^ permalink raw reply [flat|nested] 18+ messages in thread* [GIT PULL 2/3] omap dts changes for v4.18 merge window
@ 2018-05-04 16:17 ` Tony Lindgren
0 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2018-05-04 16:17 UTC (permalink / raw)
To: linux-arm-kernel
From: "Tony Lindgren" <tony@atomide.com>
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-signed
for you to fetch changes up to 8dfa75524a0e0e2b4eaf2a3dc178f6b4d8db85d9:
ARM: dts: correct invalid I/O definition for MMC/SD card detect on T410 (2018-05-03 10:03:01 -0700)
----------------------------------------------------------------
Device tree changes for omap variants for v4.18 merge window
This series adds support for am335x-pockebeagle and also add missing
pinctrl configuration for am335x evm and beagle bone variants.
There are also changes to add missing omap3 oscillator clocks for audio,
and fixes am437x tps65218 irq type used for various board specific
files.
There are also few minor fixes included that are not urgent. The
fixes for n8x0 audio also depend on driver changes, and the hp t410
mmc card detect mux typo is harmless.
----------------------------------------------------------------
Adam Ford (1):
ARM: dts: logicpd-som-lv: Enable Touchscreen controller
Faiz Abbas (1):
ARM: dts: am33xx: Add pinmux data for mmc1 in am335x-evm, evmsk and beaglebone
Graeme Smecher (1):
ARM: dts: correct invalid I/O definition for MMC/SD card detect on T410
H. Nikolaus Schaller (2):
ARM: dts: omap3-pandora: Add fixed 26MHz clock as fck for twl
ARM: dts: omap3-gta04: Add fixed 26MHz clock as fck for twl
Peter Ujfalusi (7):
ARM: dts: omap3-beagle-xm: Add fixed 26MHz clock as fck for twl
ARM: dts: am437x-gp-evm: Correct tps65218 irq type
ARM: dts: am437x-cm-t43: Correct tps65218 irq type
ARM: dts: am437x-epos-evm: Correct tps65218 irq type
ARM: dts: am437x-sk-evm: Correct tps65218 irq type
ARM: dts: omap2420-n810: Enable McBSP2 for audio
ARM: dts: omap2420-n810: Correct the audio codec (tlv320aic33) node
Robert Nelson (1):
ARM: dts: Add am335x-pocketbeagle
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/am335x-bone-common.dtsi | 9 +-
arch/arm/boot/dts/am335x-evm.dts | 9 +-
arch/arm/boot/dts/am335x-evmsk.dts | 9 +-
arch/arm/boot/dts/am335x-osd335x-common.dtsi | 124 ++++++++++++++
arch/arm/boot/dts/am335x-pocketbeagle.dts | 237 +++++++++++++++++++++++++++
arch/arm/boot/dts/am437x-cm-t43.dts | 2 +-
arch/arm/boot/dts/am437x-gp-evm.dts | 2 +-
arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
arch/arm/boot/dts/dm8148-t410.dts | 2 +-
arch/arm/boot/dts/logicpd-som-lv.dtsi | 25 +++
arch/arm/boot/dts/omap2420-n810.dts | 63 ++++++-
arch/arm/boot/dts/omap3-beagle-xm.dts | 10 ++
arch/arm/boot/dts/omap3-gta04.dtsi | 10 ++
arch/arm/boot/dts/omap3-pandora-common.dtsi | 10 ++
16 files changed, 507 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/boot/dts/am335x-osd335x-common.dtsi
create mode 100644 arch/arm/boot/dts/am335x-pocketbeagle.dts
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [GIT PULL 2/3] omap dts changes for v4.18 merge window
2018-05-04 16:17 ` Tony Lindgren
@ 2018-05-14 8:19 ` Olof Johansson
-1 siblings, 0 replies; 18+ messages in thread
From: Olof Johansson @ 2018-05-14 8:19 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, arm, linux-arm-kernel
On Fri, May 04, 2018 at 09:17:32AM -0700, Tony Lindgren wrote:
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-signed
>
> for you to fetch changes up to 8dfa75524a0e0e2b4eaf2a3dc178f6b4d8db85d9:
>
> ARM: dts: correct invalid I/O definition for MMC/SD card detect on T410 (2018-05-03 10:03:01 -0700)
>
> ----------------------------------------------------------------
> Device tree changes for omap variants for v4.18 merge window
>
> This series adds support for am335x-pockebeagle and also add missing
> pinctrl configuration for am335x evm and beagle bone variants.
>
> There are also changes to add missing omap3 oscillator clocks for audio,
> and fixes am437x tps65218 irq type used for various board specific
> files.
>
> There are also few minor fixes included that are not urgent. The
> fixes for n8x0 audio also depend on driver changes, and the hp t410
> mmc card detect mux typo is harmless.
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL 2/3] omap dts changes for v4.18 merge window
@ 2018-05-14 8:19 ` Olof Johansson
0 siblings, 0 replies; 18+ messages in thread
From: Olof Johansson @ 2018-05-14 8:19 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, May 04, 2018 at 09:17:32AM -0700, Tony Lindgren wrote:
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-signed
>
> for you to fetch changes up to 8dfa75524a0e0e2b4eaf2a3dc178f6b4d8db85d9:
>
> ARM: dts: correct invalid I/O definition for MMC/SD card detect on T410 (2018-05-03 10:03:01 -0700)
>
> ----------------------------------------------------------------
> Device tree changes for omap variants for v4.18 merge window
>
> This series adds support for am335x-pockebeagle and also add missing
> pinctrl configuration for am335x evm and beagle bone variants.
>
> There are also changes to add missing omap3 oscillator clocks for audio,
> and fixes am437x tps65218 irq type used for various board specific
> files.
>
> There are also few minor fixes included that are not urgent. The
> fixes for n8x0 audio also depend on driver changes, and the hp t410
> mmc card detect mux typo is harmless.
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL 3/3] omap sdhci dts changes for v4.18 merge window
2018-05-04 16:17 ` Tony Lindgren
@ 2018-05-04 16:17 ` Tony Lindgren
-1 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2018-05-04 16:17 UTC (permalink / raw)
To: arm; +Cc: Tony Lindgren, linux-omap, linux-arm-kernel
From: "Tony Lindgren" <tony@atomide.com>
The following changes since commit 3f4028780287ff5a7308f40e10bbba9a42b993aa:
mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode (2018-05-03 09:37:13 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-sdhci-signed
for you to fetch changes up to 24a6f1f65ea567d017c598faf1374ee443f73851:
Documentation: ARM: Add new MMC requirements for DRA7/K2G (2018-05-03 10:32:20 -0700)
----------------------------------------------------------------
Device tree changes for omap variants for SDHCI
This series adds the devicetree configuration needed for pinctrl on
dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
driver. To use SDHCI, both the pins and the iodelay needs to be
configured.
This series is based on the related SDHCI drivers changes on a branch
set up by Ulf.
----------------------------------------------------------------
Hari Nagalla (2):
ARM: dts: dra72-evm-common: Add wilink8 wlan support
ARM: dts: dra7-evm: Add wilink8 wlan support
Kishon Vijay Abraham I (10):
ARM: dts: dra72-evm-common: Remove mmc specific pinmux
ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2
ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup
ARM: dts: am57xx-idk: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown
ARM: dts: dra71-evm: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown
ARM: dts: am57xx-beagle-x15/am57xx-idk: Fix pinctrl-names
ARM: dts: dra7-evm: Model EVM_3V6 regulator
ARM: dts: dra7: Use sdhci-omap programming model
ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node
Documentation: ARM: Add new MMC requirements for DRA7/K2G
Sekhar Nori (1):
ARM: dts: am574x-idk: Add pinmux configuration for MMC
Vishal Mahaveer (1):
ARM: dts: dra76-evm: Add wilink8 wlan support
Documentation/arm/OMAP/README | 4 ++
arch/arm/boot/dts/am571x-idk.dts | 5 +-
arch/arm/boot/dts/am572x-idk.dts | 5 +-
arch/arm/boot/dts/am574x-idk.dts | 20 +++++++
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 4 +-
arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
arch/arm/boot/dts/am57xx-idk-common.dtsi | 14 +----
arch/arm/boot/dts/dra7-evm-common.dtsi | 15 ++++++
arch/arm/boot/dts/dra7-evm.dts | 68 +++++++++++++++++++++++
arch/arm/boot/dts/dra7-mmc-iodelay.dtsi | 19 +++++++
arch/arm/boot/dts/dra7.dtsi | 32 ++++++-----
arch/arm/boot/dts/dra71-evm.dts | 17 ++----
arch/arm/boot/dts/dra72-evm-common.dtsi | 71 +++++++++++++++----------
arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi | 11 ++++
arch/arm/boot/dts/dra76-evm.dts | 34 +++++++++++-
15 files changed, 243 insertions(+), 79 deletions(-)
create mode 100644 arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
^ permalink raw reply [flat|nested] 18+ messages in thread* [GIT PULL 3/3] omap sdhci dts changes for v4.18 merge window
@ 2018-05-04 16:17 ` Tony Lindgren
0 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2018-05-04 16:17 UTC (permalink / raw)
To: linux-arm-kernel
From: "Tony Lindgren" <tony@atomide.com>
The following changes since commit 3f4028780287ff5a7308f40e10bbba9a42b993aa:
mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode (2018-05-03 09:37:13 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-sdhci-signed
for you to fetch changes up to 24a6f1f65ea567d017c598faf1374ee443f73851:
Documentation: ARM: Add new MMC requirements for DRA7/K2G (2018-05-03 10:32:20 -0700)
----------------------------------------------------------------
Device tree changes for omap variants for SDHCI
This series adds the devicetree configuration needed for pinctrl on
dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
driver. To use SDHCI, both the pins and the iodelay needs to be
configured.
This series is based on the related SDHCI drivers changes on a branch
set up by Ulf.
----------------------------------------------------------------
Hari Nagalla (2):
ARM: dts: dra72-evm-common: Add wilink8 wlan support
ARM: dts: dra7-evm: Add wilink8 wlan support
Kishon Vijay Abraham I (10):
ARM: dts: dra72-evm-common: Remove mmc specific pinmux
ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2
ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup
ARM: dts: am57xx-idk: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown
ARM: dts: dra71-evm: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown
ARM: dts: am57xx-beagle-x15/am57xx-idk: Fix pinctrl-names
ARM: dts: dra7-evm: Model EVM_3V6 regulator
ARM: dts: dra7: Use sdhci-omap programming model
ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node
Documentation: ARM: Add new MMC requirements for DRA7/K2G
Sekhar Nori (1):
ARM: dts: am574x-idk: Add pinmux configuration for MMC
Vishal Mahaveer (1):
ARM: dts: dra76-evm: Add wilink8 wlan support
Documentation/arm/OMAP/README | 4 ++
arch/arm/boot/dts/am571x-idk.dts | 5 +-
arch/arm/boot/dts/am572x-idk.dts | 5 +-
arch/arm/boot/dts/am574x-idk.dts | 20 +++++++
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 4 +-
arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 +-
arch/arm/boot/dts/am57xx-idk-common.dtsi | 14 +----
arch/arm/boot/dts/dra7-evm-common.dtsi | 15 ++++++
arch/arm/boot/dts/dra7-evm.dts | 68 +++++++++++++++++++++++
arch/arm/boot/dts/dra7-mmc-iodelay.dtsi | 19 +++++++
arch/arm/boot/dts/dra7.dtsi | 32 ++++++-----
arch/arm/boot/dts/dra71-evm.dts | 17 ++----
arch/arm/boot/dts/dra72-evm-common.dtsi | 71 +++++++++++++++----------
arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi | 11 ++++
arch/arm/boot/dts/dra76-evm.dts | 34 +++++++++++-
15 files changed, 243 insertions(+), 79 deletions(-)
create mode 100644 arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [GIT PULL 3/3] omap sdhci dts changes for v4.18 merge window
2018-05-04 16:17 ` Tony Lindgren
@ 2018-05-14 8:22 ` Olof Johansson
-1 siblings, 0 replies; 18+ messages in thread
From: Olof Johansson @ 2018-05-14 8:22 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, arm, ulf.hansson, linux-arm-kernel
On Fri, May 04, 2018 at 09:17:33AM -0700, Tony Lindgren wrote:
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit 3f4028780287ff5a7308f40e10bbba9a42b993aa:
>
> mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode (2018-05-03 09:37:13 +0200)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-sdhci-signed
>
> for you to fetch changes up to 24a6f1f65ea567d017c598faf1374ee443f73851:
>
> Documentation: ARM: Add new MMC requirements for DRA7/K2G (2018-05-03 10:32:20 -0700)
>
> ----------------------------------------------------------------
> Device tree changes for omap variants for SDHCI
>
> This series adds the devicetree configuration needed for pinctrl on
> dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
> driver. To use SDHCI, both the pins and the iodelay needs to be
> configured.
>
> This series is based on the related SDHCI drivers changes on a branch
> set up by Ulf.
Hi Tony,
Just to make sure Ulf isn't taken by surprise (since I didn't see the initial
agreement of a stable branch), it's a good idea to include him on the pull
request.
Also, the diffstat doesn't take that branch into consideration so it doesn't
match with what I've merged with. Having the URL of Ulf's branch helps, in that
case I'd just merge that branch first and get the dependency documented.
Ulf, does the above sound OK with you, and said branch is 100% guaranteed to
not be rebased?
Thanks,
-Olof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL 3/3] omap sdhci dts changes for v4.18 merge window
@ 2018-05-14 8:22 ` Olof Johansson
0 siblings, 0 replies; 18+ messages in thread
From: Olof Johansson @ 2018-05-14 8:22 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, May 04, 2018 at 09:17:33AM -0700, Tony Lindgren wrote:
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit 3f4028780287ff5a7308f40e10bbba9a42b993aa:
>
> mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode (2018-05-03 09:37:13 +0200)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-sdhci-signed
>
> for you to fetch changes up to 24a6f1f65ea567d017c598faf1374ee443f73851:
>
> Documentation: ARM: Add new MMC requirements for DRA7/K2G (2018-05-03 10:32:20 -0700)
>
> ----------------------------------------------------------------
> Device tree changes for omap variants for SDHCI
>
> This series adds the devicetree configuration needed for pinctrl on
> dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
> driver. To use SDHCI, both the pins and the iodelay needs to be
> configured.
>
> This series is based on the related SDHCI drivers changes on a branch
> set up by Ulf.
Hi Tony,
Just to make sure Ulf isn't taken by surprise (since I didn't see the initial
agreement of a stable branch), it's a good idea to include him on the pull
request.
Also, the diffstat doesn't take that branch into consideration so it doesn't
match with what I've merged with. Having the URL of Ulf's branch helps, in that
case I'd just merge that branch first and get the dependency documented.
Ulf, does the above sound OK with you, and said branch is 100% guaranteed to
not be rebased?
Thanks,
-Olof
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL 3/3] omap sdhci dts changes for v4.18 merge window
2018-05-14 8:22 ` Olof Johansson
@ 2018-05-14 9:41 ` Ulf Hansson
-1 siblings, 0 replies; 18+ messages in thread
From: Ulf Hansson @ 2018-05-14 9:41 UTC (permalink / raw)
To: Olof Johansson; +Cc: Tony Lindgren, linux-omap, arm, Linux ARM
On 14 May 2018 at 10:22, Olof Johansson <olof@lixom.net> wrote:
> On Fri, May 04, 2018 at 09:17:33AM -0700, Tony Lindgren wrote:
>> From: "Tony Lindgren" <tony@atomide.com>
>>
>> The following changes since commit 3f4028780287ff5a7308f40e10bbba9a42b993aa:
>>
>> mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode (2018-05-03 09:37:13 +0200)
>>
>> are available in the Git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-sdhci-signed
>>
>> for you to fetch changes up to 24a6f1f65ea567d017c598faf1374ee443f73851:
>>
>> Documentation: ARM: Add new MMC requirements for DRA7/K2G (2018-05-03 10:32:20 -0700)
>>
>> ----------------------------------------------------------------
>> Device tree changes for omap variants for SDHCI
>>
>> This series adds the devicetree configuration needed for pinctrl on
>> dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
>> driver. To use SDHCI, both the pins and the iodelay needs to be
>> configured.
>>
>> This series is based on the related SDHCI drivers changes on a branch
>> set up by Ulf.
>
> Hi Tony,
>
> Just to make sure Ulf isn't taken by surprise (since I didn't see the initial
> agreement of a stable branch), it's a good idea to include him on the pull
> request.
No surprise.
>
> Also, the diffstat doesn't take that branch into consideration so it doesn't
> match with what I've merged with. Having the URL of Ulf's branch helps, in that
> case I'd just merge that branch first and get the dependency documented.
>
>
> Ulf, does the above sound OK with you, and said branch is 100% guaranteed to
> not be rebased?
Right, the branch is immutable. Feel free to pull it.
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git sdhci_omap
Or if you prefer a signed tag: sdhci-omap-v4.17-rc3
Kind regards
Uffe
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL 3/3] omap sdhci dts changes for v4.18 merge window
@ 2018-05-14 9:41 ` Ulf Hansson
0 siblings, 0 replies; 18+ messages in thread
From: Ulf Hansson @ 2018-05-14 9:41 UTC (permalink / raw)
To: linux-arm-kernel
On 14 May 2018 at 10:22, Olof Johansson <olof@lixom.net> wrote:
> On Fri, May 04, 2018 at 09:17:33AM -0700, Tony Lindgren wrote:
>> From: "Tony Lindgren" <tony@atomide.com>
>>
>> The following changes since commit 3f4028780287ff5a7308f40e10bbba9a42b993aa:
>>
>> mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode (2018-05-03 09:37:13 +0200)
>>
>> are available in the Git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-sdhci-signed
>>
>> for you to fetch changes up to 24a6f1f65ea567d017c598faf1374ee443f73851:
>>
>> Documentation: ARM: Add new MMC requirements for DRA7/K2G (2018-05-03 10:32:20 -0700)
>>
>> ----------------------------------------------------------------
>> Device tree changes for omap variants for SDHCI
>>
>> This series adds the devicetree configuration needed for pinctrl on
>> dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
>> driver. To use SDHCI, both the pins and the iodelay needs to be
>> configured.
>>
>> This series is based on the related SDHCI drivers changes on a branch
>> set up by Ulf.
>
> Hi Tony,
>
> Just to make sure Ulf isn't taken by surprise (since I didn't see the initial
> agreement of a stable branch), it's a good idea to include him on the pull
> request.
No surprise.
>
> Also, the diffstat doesn't take that branch into consideration so it doesn't
> match with what I've merged with. Having the URL of Ulf's branch helps, in that
> case I'd just merge that branch first and get the dependency documented.
>
>
> Ulf, does the above sound OK with you, and said branch is 100% guaranteed to
> not be rebased?
Right, the branch is immutable. Feel free to pull it.
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git sdhci_omap
Or if you prefer a signed tag: sdhci-omap-v4.17-rc3
Kind regards
Uffe
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL 3/3] omap sdhci dts changes for v4.18 merge window
2018-05-14 9:41 ` Ulf Hansson
@ 2018-05-14 16:22 ` Olof Johansson
-1 siblings, 0 replies; 18+ messages in thread
From: Olof Johansson @ 2018-05-14 16:22 UTC (permalink / raw)
To: Ulf Hansson; +Cc: Tony Lindgren, linux-omap, arm, Linux ARM
On Mon, May 14, 2018 at 11:41:18AM +0200, Ulf Hansson wrote:
> On 14 May 2018 at 10:22, Olof Johansson <olof@lixom.net> wrote:
> > On Fri, May 04, 2018 at 09:17:33AM -0700, Tony Lindgren wrote:
> >> From: "Tony Lindgren" <tony@atomide.com>
> >>
> >> The following changes since commit 3f4028780287ff5a7308f40e10bbba9a42b993aa:
> >>
> >> mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode (2018-05-03 09:37:13 +0200)
> >>
> >> are available in the Git repository at:
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-sdhci-signed
> >>
> >> for you to fetch changes up to 24a6f1f65ea567d017c598faf1374ee443f73851:
> >>
> >> Documentation: ARM: Add new MMC requirements for DRA7/K2G (2018-05-03 10:32:20 -0700)
> >>
> >> ----------------------------------------------------------------
> >> Device tree changes for omap variants for SDHCI
> >>
> >> This series adds the devicetree configuration needed for pinctrl on
> >> dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
> >> driver. To use SDHCI, both the pins and the iodelay needs to be
> >> configured.
> >>
> >> This series is based on the related SDHCI drivers changes on a branch
> >> set up by Ulf.
> >
> > Hi Tony,
> >
> > Just to make sure Ulf isn't taken by surprise (since I didn't see the initial
> > agreement of a stable branch), it's a good idea to include him on the pull
> > request.
>
> No surprise.
>
> >
> > Also, the diffstat doesn't take that branch into consideration so it doesn't
> > match with what I've merged with. Having the URL of Ulf's branch helps, in that
> > case I'd just merge that branch first and get the dependency documented.
> >
> >
> > Ulf, does the above sound OK with you, and said branch is 100% guaranteed to
> > not be rebased?
>
> Right, the branch is immutable. Feel free to pull it.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git sdhci_omap
>
> Or if you prefer a signed tag: sdhci-omap-v4.17-rc3
Great, thanks!
-Olof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL 3/3] omap sdhci dts changes for v4.18 merge window
@ 2018-05-14 16:22 ` Olof Johansson
0 siblings, 0 replies; 18+ messages in thread
From: Olof Johansson @ 2018-05-14 16:22 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, May 14, 2018 at 11:41:18AM +0200, Ulf Hansson wrote:
> On 14 May 2018 at 10:22, Olof Johansson <olof@lixom.net> wrote:
> > On Fri, May 04, 2018 at 09:17:33AM -0700, Tony Lindgren wrote:
> >> From: "Tony Lindgren" <tony@atomide.com>
> >>
> >> The following changes since commit 3f4028780287ff5a7308f40e10bbba9a42b993aa:
> >>
> >> mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode (2018-05-03 09:37:13 +0200)
> >>
> >> are available in the Git repository at:
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-sdhci-signed
> >>
> >> for you to fetch changes up to 24a6f1f65ea567d017c598faf1374ee443f73851:
> >>
> >> Documentation: ARM: Add new MMC requirements for DRA7/K2G (2018-05-03 10:32:20 -0700)
> >>
> >> ----------------------------------------------------------------
> >> Device tree changes for omap variants for SDHCI
> >>
> >> This series adds the devicetree configuration needed for pinctrl on
> >> dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
> >> driver. To use SDHCI, both the pins and the iodelay needs to be
> >> configured.
> >>
> >> This series is based on the related SDHCI drivers changes on a branch
> >> set up by Ulf.
> >
> > Hi Tony,
> >
> > Just to make sure Ulf isn't taken by surprise (since I didn't see the initial
> > agreement of a stable branch), it's a good idea to include him on the pull
> > request.
>
> No surprise.
>
> >
> > Also, the diffstat doesn't take that branch into consideration so it doesn't
> > match with what I've merged with. Having the URL of Ulf's branch helps, in that
> > case I'd just merge that branch first and get the dependency documented.
> >
> >
> > Ulf, does the above sound OK with you, and said branch is 100% guaranteed to
> > not be rebased?
>
> Right, the branch is immutable. Feel free to pull it.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git sdhci_omap
>
> Or if you prefer a signed tag: sdhci-omap-v4.17-rc3
Great, thanks!
-Olof
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL 3/3] omap sdhci dts changes for v4.18 merge window
2018-05-04 16:17 ` Tony Lindgren
@ 2018-05-14 16:22 ` Olof Johansson
-1 siblings, 0 replies; 18+ messages in thread
From: Olof Johansson @ 2018-05-14 16:22 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, arm, linux-arm-kernel
On Fri, May 04, 2018 at 09:17:33AM -0700, Tony Lindgren wrote:
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit 3f4028780287ff5a7308f40e10bbba9a42b993aa:
>
> mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode (2018-05-03 09:37:13 +0200)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-sdhci-signed
>
> for you to fetch changes up to 24a6f1f65ea567d017c598faf1374ee443f73851:
>
> Documentation: ARM: Add new MMC requirements for DRA7/K2G (2018-05-03 10:32:20 -0700)
>
> ----------------------------------------------------------------
> Device tree changes for omap variants for SDHCI
>
> This series adds the devicetree configuration needed for pinctrl on
> dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
> driver. To use SDHCI, both the pins and the iodelay needs to be
> configured.
>
> This series is based on the related SDHCI drivers changes on a branch
> set up by Ulf.
Thanks, merged now.
-Olof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL 3/3] omap sdhci dts changes for v4.18 merge window
@ 2018-05-14 16:22 ` Olof Johansson
0 siblings, 0 replies; 18+ messages in thread
From: Olof Johansson @ 2018-05-14 16:22 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, May 04, 2018 at 09:17:33AM -0700, Tony Lindgren wrote:
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit 3f4028780287ff5a7308f40e10bbba9a42b993aa:
>
> mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode (2018-05-03 09:37:13 +0200)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/dt-sdhci-signed
>
> for you to fetch changes up to 24a6f1f65ea567d017c598faf1374ee443f73851:
>
> Documentation: ARM: Add new MMC requirements for DRA7/K2G (2018-05-03 10:32:20 -0700)
>
> ----------------------------------------------------------------
> Device tree changes for omap variants for SDHCI
>
> This series adds the devicetree configuration needed for pinctrl on
> dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
> driver. To use SDHCI, both the pins and the iodelay needs to be
> configured.
>
> This series is based on the related SDHCI drivers changes on a branch
> set up by Ulf.
Thanks, merged now.
-Olof
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL 1/3] ti-sysc driver changes for v4.18 merge window
2018-05-04 16:17 ` Tony Lindgren
@ 2018-05-14 8:19 ` Olof Johansson
-1 siblings, 0 replies; 18+ messages in thread
From: Olof Johansson @ 2018-05-14 8:19 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, arm, linux-arm-kernel
On Fri, May 04, 2018 at 09:17:31AM -0700, Tony Lindgren wrote:
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/ti-sysc-signed
>
> for you to fetch changes up to dc4c85eac6bc8cfe25144936c5636aa1415bbc12:
>
> bus: ti-sysc: Show module information for suspend if DEBUG is enabled (2018-05-01 06:54:17 -0700)
>
> ----------------------------------------------------------------
> ti-sysc driver related changes for omap variants
>
> This series improves the ti-sysc interconnect target module driver to
> the point where a most of SoC can be booted with interconnect target
> module data configured in device tree instead of legacy platform data.
> The related device tree changes need some more work though, and can
> wait for v4.19. Also some drivers using nested interconnects like DSS
> need more work.
>
> We can now remove the unused pm-noop code that is not doing anything
> any longer. And we can now initialize things for PM and display pdata
> later to prepare things for using ti-sysc driver.
>
> We also need to add some more quirk handling so we can boot both with
> platform data and dts data.
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL 1/3] ti-sysc driver changes for v4.18 merge window
@ 2018-05-14 8:19 ` Olof Johansson
0 siblings, 0 replies; 18+ messages in thread
From: Olof Johansson @ 2018-05-14 8:19 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, May 04, 2018 at 09:17:31AM -0700, Tony Lindgren wrote:
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.18/ti-sysc-signed
>
> for you to fetch changes up to dc4c85eac6bc8cfe25144936c5636aa1415bbc12:
>
> bus: ti-sysc: Show module information for suspend if DEBUG is enabled (2018-05-01 06:54:17 -0700)
>
> ----------------------------------------------------------------
> ti-sysc driver related changes for omap variants
>
> This series improves the ti-sysc interconnect target module driver to
> the point where a most of SoC can be booted with interconnect target
> module data configured in device tree instead of legacy platform data.
> The related device tree changes need some more work though, and can
> wait for v4.19. Also some drivers using nested interconnects like DSS
> need more work.
>
> We can now remove the unused pm-noop code that is not doing anything
> any longer. And we can now initialize things for PM and display pdata
> later to prepare things for using ti-sysc driver.
>
> We also need to add some more quirk handling so we can boot both with
> platform data and dts data.
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2018-05-14 16:22 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-04 16:17 [GIT PULL 1/3] ti-sysc driver changes for v4.18 merge window Tony Lindgren
2018-05-04 16:17 ` Tony Lindgren
2018-05-04 16:17 ` [GIT PULL 2/3] omap dts " Tony Lindgren
2018-05-04 16:17 ` Tony Lindgren
2018-05-14 8:19 ` Olof Johansson
2018-05-14 8:19 ` Olof Johansson
2018-05-04 16:17 ` [GIT PULL 3/3] omap sdhci " Tony Lindgren
2018-05-04 16:17 ` Tony Lindgren
2018-05-14 8:22 ` Olof Johansson
2018-05-14 8:22 ` Olof Johansson
2018-05-14 9:41 ` Ulf Hansson
2018-05-14 9:41 ` Ulf Hansson
2018-05-14 16:22 ` Olof Johansson
2018-05-14 16:22 ` Olof Johansson
2018-05-14 16:22 ` Olof Johansson
2018-05-14 16:22 ` Olof Johansson
2018-05-14 8:19 ` [GIT PULL 1/3] ti-sysc driver " Olof Johansson
2018-05-14 8:19 ` Olof Johansson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.