[PATCH v3 0/5] ALSA: hda - hdmi support dynmaic pcm assignment

[PATCH v3 0/5] ALSA: hda - hdmi support dynmaic pcm assignment

[libin.yang]

From: Libin Yang <libin.yang@linux.intel.com>

The patches are trying to support dynamically binding PCM to pin
in HDMI/DP audio.

The pin will not bind to any PCM if there is not monitor connected.
When there is a monitor connected to the port (pin), driver will
try to find a proper PCM to assign to the port and setup the pin
if necessary.

Libin Yang (5):
  ALSA: hda - hdmi begin to support dynamic PCM assignment
  ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode
  ALSA: hda - hdmi operate spdif based on pcm
  ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug
  ALSA: hda - hdmi setup pin when monitor hotplug in pcm dynamic
    assignment mode

 sound/pci/hda/hda_codec.h  |   1 +
 sound/pci/hda/patch_hdmi.c | 369 ++++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 347 insertions(+), 23 deletions(-)

-- 
1.9.1

[PATCH v3 1/5] ALSA: hda - hdmi begin to support dynamic PCM assignment

[libin.yang]

From: Libin Yang <libin.yang@linux.intel.com>

Begin to support dynamic PCM assignment to pin in
hdmi audio driver.

This means PCM will not be statically bound with pin.
When there is a monitor connected, the corresponding pin
will try to find a proper PCM to bind. When the monitor
is disconnected, the corresponding pin will unbind
the PCM. This helps to reduce the PCM number when there
are many pins (device entries in DP MST mode) and only
a few of them work at the same time.

This patch adds the pcm member in struct hdmi_spec_per_pin.
When PCM is dynamically bound to the pin, the member pcm
will pointer to the corresponding pcm_rec[] in hdmi_spec,
which means the hda_pcm is bound to the pin.

Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
---
 sound/pci/hda/patch_hdmi.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 85342d2..4666208 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -83,6 +83,7 @@ struct hdmi_spec_per_pin {
 	struct mutex lock;
 	struct delayed_work work;
 	struct snd_kcontrol *eld_ctl;
+	struct hda_pcm *pcm; /* pointer to spec->pcm_rec[n] dynamically*/
 	int repoll_count;
 	bool setup; /* the stream has been set up by prepare callback */
 	int channels; /* current number of channels */
@@ -141,7 +142,7 @@ struct hdmi_spec {
 	struct hdmi_ops ops;
 
 	bool dyn_pin_out;
-
+	bool dyn_pcm_assign;
 	/*
 	 * Non-generic VIA/NVIDIA specific
 	 */
@@ -381,13 +382,16 @@ static int hinfo_to_pin_index(struct hda_codec *codec,
 			      struct hda_pcm_stream *hinfo)
 {
 	struct hdmi_spec *spec = codec->spec;
+	struct hdmi_spec_per_pin *per_pin;
 	int pin_idx;
 
-	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++)
-		if (get_pcm_rec(spec, pin_idx)->stream == hinfo)
+	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
+		per_pin = get_pin(spec, pin_idx);
+		if (per_pin->pcm && per_pin->pcm->stream == hinfo)
 			return pin_idx;
+	}
 
-	codec_warn(codec, "HDMI: hinfo %p not registered\n", hinfo);
+	codec_dbg(codec, "HDMI: hinfo %p not registered\n", hinfo);
 	return -EINVAL;
 }
 
@@ -2070,6 +2074,7 @@ static int hdmi_chmap_ctl_put(struct snd_kcontrol *kcontrol,
 static int generic_hdmi_build_pcms(struct hda_codec *codec)
 {
 	struct hdmi_spec *spec = codec->spec;
+	struct hdmi_spec_per_pin *per_pin;
 	int pin_idx;
 
 	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
@@ -2079,6 +2084,10 @@ static int generic_hdmi_build_pcms(struct hda_codec *codec)
 		info = snd_hda_codec_pcm_new(codec, "HDMI %d", pin_idx);
 		if (!info)
 			return -ENOMEM;
+		if (!spec->dyn_pcm_assign) {
+			per_pin = get_pin(spec, pin_idx);
+			per_pin->pcm = info;
+		}
 		spec->pcm_rec[pin_idx] = info;
 		info->pcm_type = HDA_PCM_TYPE_HDMI;
 		info->own_chmap = true;
-- 
1.9.1

[PATCH v3 2/5] ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode

[libin.yang]

From: Libin Yang <libin.yang@linux.intel.com>

Pulseaudio requires open pcm successfully when probing.

This patch handles playback without monitor in dynamic pcm assignment
mode. It tries to open/prepare/close pcm successfully even there is
no pin bound to the PCM. On the meantime, it will try to find a proper
converter for the PCM.

As pcm is This patch introduces a pcm_lock in struct hdmi_spec.
This lock is used to protect:
1. the variables in struct hdmi_spec;
2. other variables shared for dynamic pcm assignment mode
3. device entry selection. As each device entry is represented by
   a separate struct struct hdmi_spec_per_pin, the lock in per_pin
   is not enough. Please see details below.

MST audio device entry operation:
1. select device entry on the pin
2. operate on the pin nid

Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
---
 sound/pci/hda/patch_hdmi.c | 172 +++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 158 insertions(+), 14 deletions(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 4666208..670db50 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -136,6 +136,7 @@ struct hdmi_spec {
 	int num_pins;
 	struct snd_array pins; /* struct hdmi_spec_per_pin */
 	struct hda_pcm *pcm_rec[16];
+	struct mutex pcm_lock;
 	unsigned int channels_max; /* max over all cvts */
 
 	struct hdmi_eld temp_eld;
@@ -1333,6 +1334,11 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
 	return 0;
 }
 
+/* Try to find an available converter
+ * If pin_idx is less then zero, just try to find an available converter.
+ * Otherwise, try to find an available converter and get the cvt mux index
+ * of the pin.
+ */
 static int hdmi_choose_cvt(struct hda_codec *codec,
 			int pin_idx, int *cvt_id, int *mux_id)
 {
@@ -1341,7 +1347,11 @@ static int hdmi_choose_cvt(struct hda_codec *codec,
 	struct hdmi_spec_per_cvt *per_cvt = NULL;
 	int cvt_idx, mux_idx = 0;
 
-	per_pin = get_pin(spec, pin_idx);
+	/* pin_idx < 0 means no pin will be bound to the converter */
+	if (pin_idx < 0)
+		per_pin = NULL;
+	else
+		per_pin = get_pin(spec, pin_idx);
 
 	/* Dynamically assign converter to stream */
 	for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
@@ -1350,6 +1360,8 @@ static int hdmi_choose_cvt(struct hda_codec *codec,
 		/* Must not already be assigned */
 		if (per_cvt->assigned)
 			continue;
+		if (per_pin == NULL)
+			break;
 		/* Must be in pin's mux's list of converters */
 		for (mux_idx = 0; mux_idx < per_pin->num_mux_nids; mux_idx++)
 			if (per_pin->mux_nids[mux_idx] == per_cvt->cvt_nid)
@@ -1362,9 +1374,10 @@ static int hdmi_choose_cvt(struct hda_codec *codec,
 
 	/* No free converters */
 	if (cvt_idx == spec->num_cvts)
-		return -ENODEV;
+		return -EBUSY;
 
-	per_pin->mux_idx = mux_idx;
+	if (per_pin != NULL)
+		per_pin->mux_idx = mux_idx;
 
 	if (cvt_id)
 		*cvt_id = cvt_idx;
@@ -1390,6 +1403,20 @@ static void intel_verify_pin_cvt_connect(struct hda_codec *codec,
 					    mux_idx);
 }
 
+/* get the mux index for the converter of the pins
+ * converter's mux index is the same for all pins on Intel platform
+ */
+static int intel_cvt_id_to_mux_idx(struct hdmi_spec *spec,
+			hda_nid_t cvt_nid)
+{
+	int i;
+
+	for (i = 0; i < spec->num_cvts; i++)
+		if (spec->cvt_nids[i] == cvt_nid)
+			return i;
+	return -EINVAL;
+}
+
 /* Intel HDMI workaround to fix audio routing issue:
  * For some Intel display codecs, pins share the same connection list.
  * So a conveter can be selected by multiple pins and playback on any of these
@@ -1441,6 +1468,69 @@ static void intel_not_share_assigned_cvt(struct hda_codec *codec,
 	}
 }
 
+/* A wrapper of intel_not_share_asigned_cvt() */
+static void intel_not_share_assigned_cvt_nid(struct hda_codec *codec,
+			hda_nid_t pin_nid, hda_nid_t cvt_nid)
+{
+	int mux_idx;
+	struct hdmi_spec *spec = codec->spec;
+
+	if (!is_haswell_plus(codec) && !is_valleyview_plus(codec))
+		return;
+
+	/* On Intel platform, the mapping of converter nid to
+	 * mux index of the pins are always the same.
+	 * The pin nid may be 0, this means all pins will not
+	 * share the converter.
+	 */
+	mux_idx = intel_cvt_id_to_mux_idx(spec, cvt_nid);
+	if (mux_idx > 0)
+		intel_not_share_assigned_cvt(codec, pin_nid, mux_idx);
+}
+
+/* called in hdmi_pcm_open when no pin is assigned to the PCM
+ * in dyn_pcm_assign mode.
+ */
+static int hdmi_pcm_open_no_pin(struct hda_pcm_stream *hinfo,
+			 struct hda_codec *codec,
+			 struct snd_pcm_substream *substream)
+{
+	struct hdmi_spec *spec = codec->spec;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int cvt_idx;
+	struct hdmi_spec_per_cvt *per_cvt = NULL;
+	int err;
+
+	err = hdmi_choose_cvt(codec, -1, &cvt_idx, NULL);
+	if (err)
+		return err;
+
+	per_cvt = get_cvt(spec, cvt_idx);
+	per_cvt->assigned = 1;
+	hinfo->nid = per_cvt->cvt_nid;
+
+	intel_not_share_assigned_cvt_nid(codec, 0, per_cvt->cvt_nid);
+
+	/* todo: setup spdif ctls assign */
+
+	/* Initially set the converter's capabilities */
+	hinfo->channels_min = per_cvt->channels_min;
+	hinfo->channels_max = per_cvt->channels_max;
+	hinfo->rates = per_cvt->rates;
+	hinfo->formats = per_cvt->formats;
+	hinfo->maxbps = per_cvt->maxbps;
+
+	/* Store the updated parameters */
+	runtime->hw.channels_min = hinfo->channels_min;
+	runtime->hw.channels_max = hinfo->channels_max;
+	runtime->hw.formats = hinfo->formats;
+	runtime->hw.rates = hinfo->rates;
+
+	snd_pcm_hw_constraint_step(substream->runtime, 0,
+				   SNDRV_PCM_HW_PARAM_CHANNELS, 2);
+	return 0;
+}
+
 /*
  * HDA PCM callbacks
  */
@@ -1457,19 +1547,36 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 	int err;
 
 	/* Validate hinfo */
+	mutex_lock(&spec->pcm_lock);
 	pin_idx = hinfo_to_pin_index(codec, hinfo);
-	if (snd_BUG_ON(pin_idx < 0))
-		return -EINVAL;
-	per_pin = get_pin(spec, pin_idx);
-	eld = &per_pin->sink_eld;
+	if (!spec->dyn_pcm_assign) {
+		if (snd_BUG_ON(pin_idx < 0)) {
+			mutex_unlock(&spec->pcm_lock);
+			return -EINVAL;
+		}
+	} else {
+		/* no pin is assigned to the PCM
+		 * PA need pcm open successfully when probe
+		 */
+		if (pin_idx < 0) {
+			err = hdmi_pcm_open_no_pin(hinfo, codec, substream);
+			mutex_unlock(&spec->pcm_lock);
+			return err;
+		}
+	}
 
 	err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, &mux_idx);
-	if (err < 0)
+	if (err < 0) {
+		mutex_unlock(&spec->pcm_lock);
 		return err;
+	}
 
 	per_cvt = get_cvt(spec, cvt_idx);
 	/* Claim converter */
 	per_cvt->assigned = 1;
+
+
+	per_pin = get_pin(spec, pin_idx);
 	per_pin->cvt_nid = per_cvt->cvt_nid;
 	hinfo->nid = per_cvt->cvt_nid;
 
@@ -1490,6 +1597,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 	hinfo->formats = per_cvt->formats;
 	hinfo->maxbps = per_cvt->maxbps;
 
+	eld = &per_pin->sink_eld;
 	/* Restrict capabilities by ELD if this isn't disabled */
 	if (!static_hdmi_pcm && eld->eld_valid) {
 		snd_hdmi_eld_update_pcm_info(&eld->info, hinfo);
@@ -1498,10 +1606,12 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 			per_cvt->assigned = 0;
 			hinfo->nid = 0;
 			snd_hda_spdif_ctls_unassign(codec, pin_idx);
+			mutex_unlock(&spec->pcm_lock);
 			return -ENODEV;
 		}
 	}
 
+	mutex_unlock(&spec->pcm_lock);
 	/* Store the updated parameters */
 	runtime->hw.channels_min = hinfo->channels_min;
 	runtime->hw.channels_max = hinfo->channels_max;
@@ -1804,13 +1914,35 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 {
 	hda_nid_t cvt_nid = hinfo->nid;
 	struct hdmi_spec *spec = codec->spec;
-	int pin_idx = hinfo_to_pin_index(codec, hinfo);
-	struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
-	hda_nid_t pin_nid = per_pin->pin_nid;
+	int pin_idx;
+	struct hdmi_spec_per_pin *per_pin;
+	hda_nid_t pin_nid;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct i915_audio_component *acomp = codec->bus->core.audio_component;
 	bool non_pcm;
 	int pinctl;
+	int err;
+
+	mutex_lock(&spec->pcm_lock);
+	pin_idx = hinfo_to_pin_index(codec, hinfo);
+	if (spec->dyn_pcm_assign && pin_idx < 0) {
+		/* when dyn_pcm_assign and pcm is not bound to a pin
+		 * skip pin setup and return 0 to make audio playback
+		 * be ongoing
+		 */
+		intel_not_share_assigned_cvt_nid(codec, 0, cvt_nid);
+		snd_hda_codec_setup_stream(codec, cvt_nid,
+					stream_tag, 0, format);
+		mutex_unlock(&spec->pcm_lock);
+		return 0;
+	}
+
+	if (snd_BUG_ON(pin_idx < 0)) {
+		mutex_unlock(&spec->pcm_lock);
+		return -EINVAL;
+	}
+	per_pin = get_pin(spec, pin_idx);
+	pin_nid = per_pin->pin_nid;
 
 	if (is_haswell_plus(codec) || is_valleyview_plus(codec)) {
 		/* Verify pin:cvt selections to avoid silent audio after S3.
@@ -1839,7 +1971,6 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 
 	hdmi_setup_audio_infoframe(codec, per_pin, non_pcm);
 	mutex_unlock(&per_pin->lock);
-
 	if (spec->dyn_pin_out) {
 		pinctl = snd_hda_codec_read(codec, pin_nid, 0,
 					    AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
@@ -1848,7 +1979,10 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 				    pinctl | PIN_OUT);
 	}
 
-	return spec->ops.setup_stream(codec, cvt_nid, pin_nid, stream_tag, format);
+	err = spec->ops.setup_stream(codec, cvt_nid, pin_nid,
+				 stream_tag, format);
+	mutex_unlock(&spec->pcm_lock);
+	return err;
 }
 
 static int generic_hdmi_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
@@ -1879,9 +2013,17 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
 		per_cvt->assigned = 0;
 		hinfo->nid = 0;
 
+		mutex_lock(&spec->pcm_lock);
 		pin_idx = hinfo_to_pin_index(codec, hinfo);
-		if (snd_BUG_ON(pin_idx < 0))
+		if (spec->dyn_pcm_assign && pin_idx < 0) {
+			mutex_unlock(&spec->pcm_lock);
+			return 0;
+		}
+
+		if (snd_BUG_ON(pin_idx < 0)) {
+			mutex_unlock(&spec->pcm_lock);
 			return -EINVAL;
+		}
 		per_pin = get_pin(spec, pin_idx);
 
 		if (spec->dyn_pin_out) {
@@ -1901,6 +2043,7 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
 		per_pin->setup = false;
 		per_pin->channels = 0;
 		mutex_unlock(&per_pin->lock);
+		mutex_unlock(&spec->pcm_lock);
 	}
 
 	return 0;
@@ -2383,6 +2526,7 @@ static int patch_generic_hdmi(struct hda_codec *codec)
 		return -ENOMEM;
 
 	spec->ops = generic_standard_hdmi_ops;
+	mutex_init(&spec->pcm_lock);
 	codec->spec = spec;
 	hdmi_array_init(spec, 4);
 
-- 
1.9.1

[PATCH v3 3/5] ALSA: hda - hdmi operate spdif based on pcm

[libin.yang]

From: Libin Yang <libin.yang@linux.intel.com>

Currently, the driver operates the spdif based on pin.
This is ok for the current driver as pcm is statically
bound to the pin.

However, if the driver uses dynamically pcm assignment,
this will cause confusion for user space.

The patch changes spdif operation from pin based to pcm based.

Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
---
 sound/pci/hda/patch_hdmi.c | 34 +++++++++++++++++++++++++++++-----
 1 file changed, 29 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 670db50..8b16dff 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -137,6 +137,7 @@ struct hdmi_spec {
 	struct snd_array pins; /* struct hdmi_spec_per_pin */
 	struct hda_pcm *pcm_rec[16];
 	struct mutex pcm_lock;
+	int pcm_used;	/* counter of pcm_rec[] */
 	unsigned int channels_max; /* max over all cvts */
 
 	struct hdmi_eld temp_eld;
@@ -379,6 +380,20 @@ static int pin_nid_to_pin_index(struct hda_codec *codec, hda_nid_t pin_nid)
 	return -EINVAL;
 }
 
+static int hinfo_to_pcm_index(struct hda_codec *codec,
+			struct hda_pcm_stream *hinfo)
+{
+	struct hdmi_spec *spec = codec->spec;
+	int pcm_idx;
+
+	for (pcm_idx = 0; pcm_idx < spec->pcm_used; pcm_idx++)
+		if (get_pcm_rec(spec, pcm_idx)->stream == hinfo)
+			return pcm_idx;
+
+	codec_warn(codec, "HDMI: hinfo %p not registered\n", hinfo);
+	return -EINVAL;
+}
+
 static int hinfo_to_pin_index(struct hda_codec *codec,
 			      struct hda_pcm_stream *hinfo)
 {
@@ -1540,13 +1555,17 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 {
 	struct hdmi_spec *spec = codec->spec;
 	struct snd_pcm_runtime *runtime = substream->runtime;
-	int pin_idx, cvt_idx, mux_idx = 0;
+	int pin_idx, cvt_idx, pcm_idx, mux_idx = 0;
 	struct hdmi_spec_per_pin *per_pin;
 	struct hdmi_eld *eld;
 	struct hdmi_spec_per_cvt *per_cvt = NULL;
 	int err;
 
 	/* Validate hinfo */
+	pcm_idx = hinfo_to_pcm_index(codec, hinfo);
+	if (pcm_idx < 0)
+		return -EINVAL;
+
 	mutex_lock(&spec->pcm_lock);
 	pin_idx = hinfo_to_pin_index(codec, hinfo);
 	if (!spec->dyn_pcm_assign) {
@@ -1588,7 +1607,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 	if (is_haswell_plus(codec) || is_valleyview_plus(codec))
 		intel_not_share_assigned_cvt(codec, per_pin->pin_nid, mux_idx);
 
-	snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);
+	snd_hda_spdif_ctls_assign(codec, pcm_idx, per_cvt->cvt_nid);
 
 	/* Initially set the converter's capabilities */
 	hinfo->channels_min = per_cvt->channels_min;
@@ -1605,7 +1624,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 		    !hinfo->rates || !hinfo->formats) {
 			per_cvt->assigned = 0;
 			hinfo->nid = 0;
-			snd_hda_spdif_ctls_unassign(codec, pin_idx);
+			snd_hda_spdif_ctls_unassign(codec, pcm_idx);
 			mutex_unlock(&spec->pcm_lock);
 			return -ENODEV;
 		}
@@ -1998,12 +2017,15 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
 			  struct snd_pcm_substream *substream)
 {
 	struct hdmi_spec *spec = codec->spec;
-	int cvt_idx, pin_idx;
+	int cvt_idx, pin_idx, pcm_idx;
 	struct hdmi_spec_per_cvt *per_cvt;
 	struct hdmi_spec_per_pin *per_pin;
 	int pinctl;
 
 	if (hinfo->nid) {
+		pcm_idx = hinfo_to_pcm_index(codec, hinfo);
+		if (snd_BUG_ON(pcm_idx < 0))
+			return -EINVAL;
 		cvt_idx = cvt_nid_to_cvt_index(codec, hinfo->nid);
 		if (snd_BUG_ON(cvt_idx < 0))
 			return -EINVAL;
@@ -2034,7 +2056,7 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
 					    pinctl & ~PIN_OUT);
 		}
 
-		snd_hda_spdif_ctls_unassign(codec, pin_idx);
+		snd_hda_spdif_ctls_unassign(codec, pcm_idx);
 
 		mutex_lock(&per_pin->lock);
 		per_pin->chmap_set = false;
@@ -2232,6 +2254,7 @@ static int generic_hdmi_build_pcms(struct hda_codec *codec)
 			per_pin->pcm = info;
 		}
 		spec->pcm_rec[pin_idx] = info;
+		spec->pcm_used++;
 		info->pcm_type = HDA_PCM_TYPE_HDMI;
 		info->own_chmap = true;
 
@@ -2282,6 +2305,7 @@ static int generic_hdmi_build_controls(struct hda_codec *codec)
 						  HDA_PCM_TYPE_HDMI);
 		if (err < 0)
 			return err;
+		/* pin number is the same with pcm number so far */
 		snd_hda_spdif_ctls_unassign(codec, pin_idx);
 
 		/* add control for ELD Bytes */
-- 
1.9.1

[PATCH v3 4/5] ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug

[libin.yang]

From: Libin Yang <libin.yang@linux.intel.com>

Dynamically bind/unbind the PCM to pin when HDMI/DP monitor hotplug.

When monitor is connected, find a proper PCM for the monitor.
When monitor is disconnected, unbind the PCM from the pin.

The binding policy (use Intel platform as example) is:
1. Try to use the legacy pin-pcm mapping for the device entry 0
   of the pin.
2. If step 1 fails, try to bind pin to the backup PCMs. For example,
   on Intel platform, if DP MST is enabled, 5 PCMs will be created.
   PCM 3, PCM 7, PCM 8 are supposed to be used by device entry 0 of
   pin 5, pin 6 and pin 7. PCM 9 and PCM 10 are the backup PCMs.
3. If step 2 fails, try to find any PCM to bind to the pin.

Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
---
 sound/pci/hda/patch_hdmi.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 8b16dff..5f71459 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -73,6 +73,8 @@ struct hdmi_spec_per_cvt {
 
 struct hdmi_spec_per_pin {
 	hda_nid_t pin_nid;
+	/* pin idx, different device entries on the same pin use the same idx */
+	int pin_nid_idx;
 	int num_mux_nids;
 	hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
 	int mux_idx;
@@ -84,6 +86,7 @@ struct hdmi_spec_per_pin {
 	struct delayed_work work;
 	struct snd_kcontrol *eld_ctl;
 	struct hda_pcm *pcm; /* pointer to spec->pcm_rec[n] dynamically*/
+	int pcm_idx; /* which pcm is attached. -1 means no pcm is attached */
 	int repoll_count;
 	bool setup; /* the stream has been set up by prepare callback */
 	int channels; /* current number of channels */
@@ -137,6 +140,7 @@ struct hdmi_spec {
 	struct snd_array pins; /* struct hdmi_spec_per_pin */
 	struct hda_pcm *pcm_rec[16];
 	struct mutex pcm_lock;
+	unsigned long pcm_bitmap;
 	int pcm_used;	/* counter of pcm_rec[] */
 	unsigned int channels_max; /* max over all cvts */
 
@@ -1715,6 +1719,60 @@ static void update_eld(struct hda_codec *codec,
 			       &per_pin->eld_ctl->id);
 }
 
+static int hdmi_find_pcm_slot(struct hdmi_spec *spec,
+				struct hdmi_spec_per_pin *per_pin)
+{
+	int i;
+
+	/* try the prefer PCM */
+	if (!test_bit(per_pin->pin_nid_idx, &spec->pcm_bitmap))
+		return per_pin->pin_nid_idx;
+
+	/* have a second try; check the "reserved area" over num_pins */
+	for (i = spec->num_pins; i < spec->pcm_used; i++) {
+		if (!test_bit(i, &spec->pcm_bitmap))
+			return i;
+	}
+
+	/* the last try; check the empty slots in pins */
+	for (i = 0; i < spec->num_pins; i++) {
+		if (!test_bit(i, &spec->pcm_bitmap))
+			return i;
+	}
+	return -EBUSY;
+}
+
+static void hdmi_attach_hda_pcm(struct hdmi_spec *spec,
+				struct hdmi_spec_per_pin *per_pin)
+{
+	int idx;
+
+	/* pcm already be attached to the pin */
+	if (per_pin->pcm)
+		return;
+	idx = hdmi_find_pcm_slot(spec, per_pin);
+	if (idx == -ENODEV)
+		return;
+	per_pin->pcm_idx = idx;
+	per_pin->pcm = spec->pcm_rec[idx];
+	set_bit(idx, &spec->pcm_bitmap);
+}
+
+static void hdmi_detach_hda_pcm(struct hdmi_spec *spec,
+				struct hdmi_spec_per_pin *per_pin)
+{
+	int idx;
+
+	/* pcm already be detached from the pin */
+	if (!per_pin->pcm)
+		return;
+	idx = per_pin->pcm_idx;
+	per_pin->pcm_idx = -1;
+	per_pin->pcm = NULL;
+	if (idx >= 0 && idx < spec->pcm_used)
+		clear_bit(idx, &spec->pcm_bitmap);
+}
+
 static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 {
 	struct hda_jack_tbl *jack;
@@ -1737,6 +1795,7 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 	snd_hda_power_up_pm(codec);
 	present = snd_hda_pin_sense(codec, pin_nid);
 
+	mutex_lock(&spec->pcm_lock);
 	mutex_lock(&per_pin->lock);
 	pin_eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE);
 	if (pin_eld->monitor_present)
@@ -1759,6 +1818,13 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 		}
 	}
 
+	if (spec->dyn_pcm_assign) {
+		if (eld->eld_valid)
+			hdmi_attach_hda_pcm(spec, per_pin);
+		else
+			hdmi_detach_hda_pcm(spec, per_pin);
+	}
+
 	if (!eld->eld_valid && repoll)
 		schedule_delayed_work(&per_pin->work, msecs_to_jiffies(300));
 	else
@@ -1771,6 +1837,7 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 		jack->block_report = !ret;
 
 	mutex_unlock(&per_pin->lock);
+	mutex_unlock(&spec->pcm_lock);
 	snd_hda_power_down_pm(codec);
 	return ret;
 }
@@ -1816,6 +1883,11 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
 
 	per_pin->pin_nid = pin_nid;
 	per_pin->non_pcm = false;
+	if (spec->dyn_pcm_assign)
+		per_pin->pcm_idx = -1;
+	else
+		per_pin->pcm_idx = pin_idx;
+	per_pin->pin_nid_idx = pin_idx;
 
 	err = hdmi_read_pin_conn(codec, pin_idx);
 	if (err < 0)
-- 
1.9.1

[PATCH v3 5/5] ALSA: hda - hdmi setup pin when monitor hotplug in pcm dynamic assignment mode

[libin.yang]

From: Libin Yang <libin.yang@linux.intel.com>

Setup pin configuration when monitor is hotplugged
in pcm dynamic assignment if the PCM is in open state.

When monitor is disconnect, The pin will be reset.

Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
---
 sound/pci/hda/hda_codec.h  |  1 +
 sound/pci/hda/patch_hdmi.c | 82 +++++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 79 insertions(+), 4 deletions(-)

diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 373fcad..ee97401 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -167,6 +167,7 @@ enum {
 /* for PCM creation */
 struct hda_pcm {
 	char *name;
+	bool in_use;
 	struct hda_pcm_stream stream[2];
 	unsigned int pcm_type;	/* HDA_PCM_TYPE_XXX */
 	int device;		/* device number to assign */
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 5f71459..7c53dd8 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1516,10 +1516,14 @@ static int hdmi_pcm_open_no_pin(struct hda_pcm_stream *hinfo,
 {
 	struct hdmi_spec *spec = codec->spec;
 	struct snd_pcm_runtime *runtime = substream->runtime;
-	int cvt_idx;
+	int cvt_idx, pcm_idx;
 	struct hdmi_spec_per_cvt *per_cvt = NULL;
 	int err;
 
+	pcm_idx = hinfo_to_pcm_index(codec, hinfo);
+	if (pcm_idx < 0)
+		return -EINVAL;
+
 	err = hdmi_choose_cvt(codec, -1, &cvt_idx, NULL);
 	if (err)
 		return err;
@@ -1530,6 +1534,7 @@ static int hdmi_pcm_open_no_pin(struct hda_pcm_stream *hinfo,
 
 	intel_not_share_assigned_cvt_nid(codec, 0, per_cvt->cvt_nid);
 
+	spec->pcm_rec[pcm_idx]->in_use = true;
 	/* todo: setup spdif ctls assign */
 
 	/* Initially set the converter's capabilities */
@@ -1598,7 +1603,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 	/* Claim converter */
 	per_cvt->assigned = 1;
 
-
+	spec->pcm_rec[pcm_idx]->in_use = true;
 	per_pin = get_pin(spec, pin_idx);
 	per_pin->cvt_nid = per_cvt->cvt_nid;
 	hinfo->nid = per_cvt->cvt_nid;
@@ -1773,6 +1778,71 @@ static void hdmi_detach_hda_pcm(struct hdmi_spec *spec,
 		clear_bit(idx, &spec->pcm_bitmap);
 }
 
+static int hdmi_get_pin_cvt_mux(struct hdmi_spec *spec,
+		struct hdmi_spec_per_pin *per_pin, hda_nid_t cvt_nid)
+{
+	int mux_idx;
+
+	for (mux_idx = 0; mux_idx < per_pin->num_mux_nids; mux_idx++)
+		if (per_pin->mux_nids[mux_idx] == cvt_nid)
+			break;
+	return mux_idx;
+}
+
+static bool check_non_pcm_per_cvt(struct hda_codec *codec, hda_nid_t cvt_nid);
+static void hdmi_pcm_setup_pin(struct hdmi_spec *spec,
+			   struct hdmi_spec_per_pin *per_pin)
+{
+	struct hda_codec *codec = per_pin->codec;
+	struct hda_pcm *pcm;
+	struct hda_pcm_stream *hinfo;
+	struct snd_pcm_substream *substream;
+
+	int mux_idx;
+	bool non_pcm;
+
+	if (per_pin->pcm_idx >= 0 && per_pin->pcm_idx < spec->pcm_used)
+		pcm = spec->pcm_rec[per_pin->pcm_idx];
+	else
+		return;
+	if (!pcm->in_use)
+		return;
+
+	/* hdmi audio only uses playback and one substream */
+	hinfo = pcm->stream;
+	substream = pcm->pcm->streams[0].substream;
+
+	per_pin->cvt_nid = hinfo->nid;
+
+	mux_idx = hdmi_get_pin_cvt_mux(spec, per_pin, hinfo->nid);
+	if (mux_idx < per_pin->num_mux_nids)
+		snd_hda_codec_write_cache(codec, per_pin->pin_nid, 0,
+				AC_VERB_SET_CONNECT_SEL,
+				mux_idx);
+	snd_hda_spdif_ctls_assign(codec, per_pin->pcm_idx, hinfo->nid);
+
+	non_pcm = check_non_pcm_per_cvt(codec, hinfo->nid);
+	if (substream->runtime)
+		per_pin->channels = substream->runtime->channels;
+	per_pin->setup = true;
+	per_pin->mux_idx = mux_idx;
+
+	hdmi_setup_audio_infoframe(codec, per_pin, non_pcm);
+}
+
+static void hdmi_pcm_reset_pin(struct hdmi_spec *spec,
+			   struct hdmi_spec_per_pin *per_pin)
+{
+	if (per_pin->pcm_idx >= 0 && per_pin->pcm_idx < spec->pcm_used)
+		snd_hda_spdif_ctls_unassign(per_pin->codec, per_pin->pcm_idx);
+
+	per_pin->chmap_set = false;
+	memset(per_pin->chmap, 0, sizeof(per_pin->chmap));
+
+	per_pin->setup = false;
+	per_pin->channels = 0;
+}
+
 static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 {
 	struct hda_jack_tbl *jack;
@@ -1819,10 +1889,13 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 	}
 
 	if (spec->dyn_pcm_assign) {
-		if (eld->eld_valid)
+		if (eld->eld_valid) {
 			hdmi_attach_hda_pcm(spec, per_pin);
-		else
+			hdmi_pcm_setup_pin(spec, per_pin);
+		} else {
+			hdmi_pcm_reset_pin(spec, per_pin);
 			hdmi_detach_hda_pcm(spec, per_pin);
+		}
 	}
 
 	if (!eld->eld_valid && repoll)
@@ -2108,6 +2181,7 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
 		hinfo->nid = 0;
 
 		mutex_lock(&spec->pcm_lock);
+		spec->pcm_rec[pcm_idx]->in_use = false;
 		pin_idx = hinfo_to_pin_index(codec, hinfo);
 		if (spec->dyn_pcm_assign && pin_idx < 0) {
 			mutex_unlock(&spec->pcm_lock);
-- 
1.9.1

Re: [PATCH v3 0/5] ALSA: hda - hdmi support dynmaic pcm assignment

[Takashi Iwai]

On Thu, 10 Dec 2015 02:52:07 +0100,
libin.yang@linux.intel.com wrote:
> 
> From: Libin Yang <libin.yang@linux.intel.com>
> 
> The patches are trying to support dynamically binding PCM to pin
> in HDMI/DP audio.
> 
> The pin will not bind to any PCM if there is not monitor connected.
> When there is a monitor connected to the port (pin), driver will
> try to find a proper PCM to assign to the port and setup the pin
> if necessary.

Could you rebase your work on the branch topic/hdmi-jack?  It contains
the upcoming changes for ELD notify callback.  This would impact on
your patchset, likely require a slight adjustment.

Also, do you have the applicable MST audio patchset for drm/i915 side,
too?  I'd like to test it together with the new patchset.


thanks,

Takashi

> 
> Libin Yang (5):
>   ALSA: hda - hdmi begin to support dynamic PCM assignment
>   ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode
>   ALSA: hda - hdmi operate spdif based on pcm
>   ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug
>   ALSA: hda - hdmi setup pin when monitor hotplug in pcm dynamic
>     assignment mode
> 
>  sound/pci/hda/hda_codec.h  |   1 +
>  sound/pci/hda/patch_hdmi.c | 369 ++++++++++++++++++++++++++++++++++++++++++---
>  2 files changed, 347 insertions(+), 23 deletions(-)
> 
> -- 
> 1.9.1
> 

Re: [PATCH v3 0/5] ALSA: hda - hdmi support dynmaic pcm assignment

[Libin Yang]

Hi Takashi,

On 12/10/2015 10:00 PM, Takashi Iwai wrote:
> On Thu, 10 Dec 2015 02:52:07 +0100,
> libin.yang@linux.intel.com wrote:
>>
>> From: Libin Yang <libin.yang@linux.intel.com>
>>
>> The patches are trying to support dynamically binding PCM to pin
>> in HDMI/DP audio.
>>
>> The pin will not bind to any PCM if there is not monitor connected.
>> When there is a monitor connected to the port (pin), driver will
>> try to find a proper PCM to assign to the port and setup the pin
>> if necessary.
>
> Could you rebase your work on the branch topic/hdmi-jack?  It contains
> the upcoming changes for ELD notify callback.  This would impact on
> your patchset, likely require a slight adjustment.

Sure, I will rebase the patches on the branch hdmi-jack.

>
> Also, do you have the applicable MST audio patchset for drm/i915 side,
> too?  I'd like to test it together with the new patchset.

Oh, yes, I have sent the patches to intel-gfx mailing list. Sorry to 
forget to CC you. I have CCed you and ALSA mailing list the patches in 
that thread now.

The drm/i915 patches are ported from Dave's patch.

Best Regards,
Libin

>
>
> thanks,
>
> Takashi
>
>>
>> Libin Yang (5):
>>    ALSA: hda - hdmi begin to support dynamic PCM assignment
>>    ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode
>>    ALSA: hda - hdmi operate spdif based on pcm
>>    ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug
>>    ALSA: hda - hdmi setup pin when monitor hotplug in pcm dynamic
>>      assignment mode
>>
>>   sound/pci/hda/hda_codec.h  |   1 +
>>   sound/pci/hda/patch_hdmi.c | 369 ++++++++++++++++++++++++++++++++++++++++++---
>>   2 files changed, 347 insertions(+), 23 deletions(-)
>>
>> --
>> 1.9.1
>>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>

Re: [PATCH v3 5/5] ALSA: hda - hdmi setup pin when monitor hotplug in pcm dynamic assignment mode

[Takashi Iwai]

On Thu, 10 Dec 2015 02:52:12 +0100,
libin.yang@linux.intel.com wrote:
> 
> From: Libin Yang <libin.yang@linux.intel.com>
> 
> Setup pin configuration when monitor is hotplugged
> in pcm dynamic assignment if the PCM is in open state.
> 
> When monitor is disconnect, The pin will be reset.
> 
> Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
> ---
>  sound/pci/hda/hda_codec.h  |  1 +
>  sound/pci/hda/patch_hdmi.c | 82 +++++++++++++++++++++++++++++++++++++++++++---
>  2 files changed, 79 insertions(+), 4 deletions(-)
> 
> diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
> index 373fcad..ee97401 100644
> --- a/sound/pci/hda/hda_codec.h
> +++ b/sound/pci/hda/hda_codec.h
> @@ -167,6 +167,7 @@ enum {
>  /* for PCM creation */
>  struct hda_pcm {
>  	char *name;
> +	bool in_use;

No need to add such a flag in a common object.  (And actually it's
wrong to add here, it should be per stream.)

The check is needed only for HDMI/DP, thus it can be put in
hdmi_spec.  And it can be a bit flag protected via your new pcm_lock.


Takashi

Re: [PATCH v3 5/5] ALSA: hda - hdmi setup pin when monitor hotplug in pcm dynamic assignment mode

[Yang, Libin]

> -----Original Message-----
> From: Takashi Iwai [mailto:tiwai@suse.de]
> Sent: Friday, December 11, 2015 6:59 PM
> To: libin.yang@linux.intel.com
> Cc: alsa-devel@alsa-project.org; Lin, Mengdong; Yang, Libin
> Subject: Re: [alsa-devel] [PATCH v3 5/5] ALSA: hda - hdmi setup pin when
> monitor hotplug in pcm dynamic assignment mode
> 
> On Thu, 10 Dec 2015 02:52:12 +0100,
> libin.yang@linux.intel.com wrote:
> >
> > From: Libin Yang <libin.yang@linux.intel.com>
> >
> > Setup pin configuration when monitor is hotplugged
> > in pcm dynamic assignment if the PCM is in open state.
> >
> > When monitor is disconnect, The pin will be reset.
> >
> > Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
> > ---
> >  sound/pci/hda/hda_codec.h  |  1 +
> >  sound/pci/hda/patch_hdmi.c | 82
> +++++++++++++++++++++++++++++++++++++++++++---
> >  2 files changed, 79 insertions(+), 4 deletions(-)
> >
> > diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
> > index 373fcad..ee97401 100644
> > --- a/sound/pci/hda/hda_codec.h
> > +++ b/sound/pci/hda/hda_codec.h
> > @@ -167,6 +167,7 @@ enum {
> >  /* for PCM creation */
> >  struct hda_pcm {
> >  	char *name;
> > +	bool in_use;
> 
> No need to add such a flag in a common object.  (And actually it's
> wrong to add here, it should be per stream.)
> 
> The check is needed only for HDMI/DP, thus it can be put in
> hdmi_spec.  And it can be a bit flag protected via your new pcm_lock.

Yes, I will put it in hdmi_spec.

Regards,
Libin

> 
> 
> Takashi