* [PATCH 1/7] ak4114 - fix errors in output selector bits
@ 2009-09-16 20:25 pavel.hofman
2009-09-16 20:25 ` [PATCH 2/7] ak4620 support, codec regs listed in proc pavel.hofman
2009-09-21 14:10 ` [PATCH 1/7] ak4114 - fix errors in output selector bits Takashi Iwai
0 siblings, 2 replies; 23+ messages in thread
From: pavel.hofman @ 2009-09-16 20:25 UTC (permalink / raw)
To: patch; +Cc: Pavel Hofman, alsa-devel
From: Pavel Hofman <pavel.hofman@ivitera.com>
* the previous version had a typo - values of AK4114_OPS10-12 were
identical with AK4114_OPS00-02
* Since no cards actually use this feature, the bug was not identified earlier
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
diff --git a/include/ak4114.h b/include/ak4114.h
index d293d36..3ce69fd 100644
--- a/include/ak4114.h
+++ b/include/ak4114.h
@@ -95,13 +95,13 @@
/* AK4114_REG_IO0 */
#define AK4114_TX1E (1<<7) /* TX1 Output Enable (1 = enable) */
-#define AK4114_OPS12 (1<<2) /* Output Though Data Selector for TX1 pin */
-#define AK4114_OPS11 (1<<1) /* Output Though Data Selector for TX1 pin */
-#define AK4114_OPS10 (1<<0) /* Output Though Data Selector for TX1 pin */
+#define AK4114_OPS12 (1<<6) /* Output Data Selector for TX1 pin */
+#define AK4114_OPS11 (1<<5) /* Output Data Selector for TX1 pin */
+#define AK4114_OPS10 (1<<4) /* Output Data Selector for TX1 pin */
#define AK4114_TX0E (1<<3) /* TX0 Output Enable (1 = enable) */
-#define AK4114_OPS02 (1<<2) /* Output Though Data Selector for TX0 pin */
-#define AK4114_OPS01 (1<<1) /* Output Though Data Selector for TX0 pin */
-#define AK4114_OPS00 (1<<0) /* Output Though Data Selector for TX0 pin */
+#define AK4114_OPS02 (1<<2) /* Output Data Selector for TX0 pin */
+#define AK4114_OPS01 (1<<1) /* Output Data Selector for TX0 pin */
+#define AK4114_OPS00 (1<<0) /* Output Data Selector for TX0 pin */
/* AK4114_REG_IO1 */
#define AK4114_EFH1 (1<<7) /* Interrupt 0 pin Hold */
--
1.5.6.3
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 2/7] ak4620 support, codec regs listed in proc
2009-09-16 20:25 [PATCH 1/7] ak4114 - fix errors in output selector bits pavel.hofman
@ 2009-09-16 20:25 ` pavel.hofman
2009-09-16 20:25 ` [PATCH 3/7] ak4113 support pavel.hofman
2009-09-21 14:10 ` [PATCH 1/7] ak4114 - fix errors in output selector bits Takashi Iwai
1 sibling, 1 reply; 23+ messages in thread
From: pavel.hofman @ 2009-09-16 20:25 UTC (permalink / raw)
To: patch; +Cc: Pavel Hofman, alsa-devel
From: Pavel Hofman <pavel.hofman@ivitera.com>
* complete support for ak4620
* codec regs listed in proc for all codecs/chips
* adding total regs for each codec
* fixing nb. of steps in input attenuation controls
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
diff --git a/i2c/other/ak4xxx-adda.c b/i2c/other/ak4xxx-adda.c
index ee47aba..1adb8a3 100644
--- a/i2c/other/ak4xxx-adda.c
+++ b/i2c/other/ak4xxx-adda.c
@@ -19,7 +19,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- */
+ */
#include <asm/io.h>
#include <linux/delay.h>
@@ -29,6 +29,7 @@
#include <sound/control.h>
#include <sound/tlv.h>
#include <sound/ak4xxx-adda.h>
+#include <sound/info.h>
MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.de>");
MODULE_DESCRIPTION("Routines for control of AK452x / AK43xx AD/DA converters");
@@ -52,26 +53,21 @@ EXPORT_SYMBOL(snd_akm4xxx_write);
static void ak4524_reset(struct snd_akm4xxx *ak, int state)
{
unsigned int chip;
- unsigned char reg, maxreg;
+ unsigned char reg;
- if (ak->type == SND_AK4528)
- maxreg = 0x06;
- else
- maxreg = 0x08;
for (chip = 0; chip < ak->num_dacs/2; chip++) {
snd_akm4xxx_write(ak, chip, 0x01, state ? 0x00 : 0x03);
if (state)
continue;
/* DAC volumes */
- for (reg = 0x04; reg < maxreg; reg++)
+ for (reg = 0x04; reg < ak->total_regs; reg++)
snd_akm4xxx_write(ak, chip, reg,
snd_akm4xxx_get(ak, chip, reg));
}
}
/* reset procedure for AK4355 and AK4358 */
-static void ak435X_reset(struct snd_akm4xxx *ak, int state,
- unsigned char total_regs)
+static void ak435X_reset(struct snd_akm4xxx *ak, int state)
{
unsigned char reg;
@@ -79,7 +75,7 @@ static void ak435X_reset(struct snd_akm4xxx *ak, int state,
snd_akm4xxx_write(ak, 0, 0x01, 0x02); /* reset and soft-mute */
return;
}
- for (reg = 0x00; reg < total_regs; reg++)
+ for (reg = 0x00; reg < ak->total_regs; reg++)
if (reg != 0x01)
snd_akm4xxx_write(ak, 0, reg,
snd_akm4xxx_get(ak, 0, reg));
@@ -91,12 +87,11 @@ static void ak4381_reset(struct snd_akm4xxx *ak, int state)
{
unsigned int chip;
unsigned char reg;
-
for (chip = 0; chip < ak->num_dacs/2; chip++) {
snd_akm4xxx_write(ak, chip, 0x00, state ? 0x0c : 0x0f);
if (state)
continue;
- for (reg = 0x01; reg < 0x05; reg++)
+ for (reg = 0x01; reg < ak->total_regs; reg++)
snd_akm4xxx_write(ak, chip, reg,
snd_akm4xxx_get(ak, chip, reg));
}
@@ -113,16 +108,17 @@ void snd_akm4xxx_reset(struct snd_akm4xxx *ak, int state)
switch (ak->type) {
case SND_AK4524:
case SND_AK4528:
+ case SND_AK4620:
ak4524_reset(ak, state);
break;
case SND_AK4529:
/* FIXME: needed for ak4529? */
break;
case SND_AK4355:
- ak435X_reset(ak, state, 0x0b);
+ ak435X_reset(ak, state);
break;
case SND_AK4358:
- ak435X_reset(ak, state, 0x10);
+ ak435X_reset(ak, state);
break;
case SND_AK4381:
ak4381_reset(ak, state);
@@ -139,7 +135,7 @@ EXPORT_SYMBOL(snd_akm4xxx_reset);
* Volume conversion table for non-linear volumes
* from -63.5dB (mute) to 0dB step 0.5dB
*
- * Used for AK4524 input/ouput attenuation, AK4528, and
+ * Used for AK4524/AK4620 input/ouput attenuation, AK4528, and
* AK5365 input attenuation
*/
static const unsigned char vol_cvt_datt[128] = {
@@ -259,8 +255,22 @@ void snd_akm4xxx_init(struct snd_akm4xxx *ak)
0x00, 0x0f, /* 0: power-up, un-reset */
0xff, 0xff
};
+ static const unsigned char inits_ak4620[] = {
+ 0x00, 0x07, /* 0: normal */
+ 0x01, 0x00, /* 0: reset */
+ 0x01, 0x02, /* 1: RSTAD */
+ 0x01, 0x03, /* 1: RSTDA */
+ 0x01, 0x0f, /* 1: normal */
+ 0x02, 0x60, /* 2: 24bit I2S */
+ 0x03, 0x01, /* 3: deemphasis off */
+ 0x04, 0x00, /* 4: LIN muted */
+ 0x05, 0x00, /* 5: RIN muted */
+ 0x06, 0x00, /* 6: LOUT muted */
+ 0x07, 0x00, /* 7: ROUT muted */
+ 0xff, 0xff
+ };
- int chip, num_chips;
+ int chip;
const unsigned char *ptr, *inits;
unsigned char reg, data;
@@ -270,42 +280,64 @@ void snd_akm4xxx_init(struct snd_akm4xxx *ak)
switch (ak->type) {
case SND_AK4524:
inits = inits_ak4524;
- num_chips = ak->num_dacs / 2;
+ ak->num_chips = ak->num_dacs / 2;
+ ak->name = "ak4524";
+ ak->total_regs = 0x08;
break;
case SND_AK4528:
inits = inits_ak4528;
- num_chips = ak->num_dacs / 2;
+ ak->num_chips = ak->num_dacs / 2;
+ ak->name = "ak4528";
+ ak->total_regs = 0x06;
break;
case SND_AK4529:
inits = inits_ak4529;
- num_chips = 1;
+ ak->num_chips = 1;
+ ak->name = "ak4529";
+ ak->total_regs = 0x0d;
break;
case SND_AK4355:
inits = inits_ak4355;
- num_chips = 1;
+ ak->num_chips = 1;
+ ak->name = "ak4355";
+ ak->total_regs = 0x0b;
break;
case SND_AK4358:
inits = inits_ak4358;
- num_chips = 1;
+ ak->num_chips = 1;
+ ak->name = "ak4358";
+ ak->total_regs = 0x10;
break;
case SND_AK4381:
inits = inits_ak4381;
- num_chips = ak->num_dacs / 2;
+ ak->num_chips = ak->num_dacs / 2;
+ ak->name = "ak4381";
+ ak->total_regs = 0x05;
break;
case SND_AK5365:
/* FIXME: any init sequence? */
+ ak->num_chips = 1;
+ ak->name = "ak5365";
+ ak->total_regs = 0x08;
return;
+ case SND_AK4620:
+ inits = inits_ak4620;
+ ak->num_chips = ak->num_dacs / 2;
+ ak->name = "ak4620";
+ ak->total_regs = 0x08;
+ break;
default:
snd_BUG();
return;
}
- for (chip = 0; chip < num_chips; chip++) {
+ for (chip = 0; chip < ak->num_chips; chip++) {
ptr = inits;
while (*ptr != 0xff) {
reg = *ptr++;
data = *ptr++;
snd_akm4xxx_write(ak, chip, reg, data);
+ udelay(10);
}
}
}
@@ -688,6 +720,12 @@ static int build_dac_controls(struct snd_akm4xxx *ak)
AK_COMPOSE(idx/2, (idx%2) + 3, 0, 255);
knew.tlv.p = db_scale_linear;
break;
+ case SND_AK4620:
+ /* register 6 & 7 */
+ knew.private_value =
+ AK_COMPOSE(idx/2, (idx%2) + 6, 0, 255);
+ knew.tlv.p = db_scale_linear;
+ break;
default:
return -EINVAL;
}
@@ -704,10 +742,12 @@ static int build_dac_controls(struct snd_akm4xxx *ak)
static int build_adc_controls(struct snd_akm4xxx *ak)
{
- int idx, err, mixer_ch, num_stereo;
+ int idx, err, mixer_ch, num_stereo, max_steps;
struct snd_kcontrol_new knew;
mixer_ch = 0;
+ if (ak->type == SND_AK4528)
+ return 0; /* no controls */
for (idx = 0; idx < ak->num_adcs;) {
memset(&knew, 0, sizeof(knew));
if (! ak->adc_info || ! ak->adc_info[mixer_ch].name) {
@@ -733,13 +773,12 @@ static int build_adc_controls(struct snd_akm4xxx *ak)
}
/* register 4 & 5 */
if (ak->type == SND_AK5365)
- knew.private_value =
- AK_COMPOSE(idx/2, (idx%2) + 4, 0, 151) |
- AK_VOL_CVT | AK_IPGA;
+ max_steps = 152;
else
- knew.private_value =
- AK_COMPOSE(idx/2, (idx%2) + 4, 0, 163) |
- AK_VOL_CVT | AK_IPGA;
+ max_steps = 164;
+ knew.private_value =
+ AK_COMPOSE(idx/2, (idx%2) + 4, 0, max_steps) |
+ AK_VOL_CVT | AK_IPGA;
knew.tlv.p = db_scale_vol_datt;
err = snd_ctl_add(ak->card, snd_ctl_new1(&knew, ak));
if (err < 0)
@@ -808,6 +847,7 @@ static int build_deemphasis(struct snd_akm4xxx *ak, int num_emphs)
switch (ak->type) {
case SND_AK4524:
case SND_AK4528:
+ case SND_AK4620:
/* register 3 */
knew.private_value = AK_COMPOSE(idx, 3, 0, 0);
break;
@@ -834,6 +874,35 @@ static int build_deemphasis(struct snd_akm4xxx *ak, int num_emphs)
return 0;
}
+#ifdef CONFIG_PROC_FS
+static void proc_regs_read(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ struct snd_akm4xxx *ak = (struct snd_akm4xxx *)entry->private_data;
+ int reg, val, chip;
+ for (chip = 0; chip < ak->num_chips; chip++) {
+ for (reg = 0; reg < ak->total_regs; reg++) {
+ val = snd_akm4xxx_get(ak, chip, reg);
+ snd_iprintf(buffer, "chip %d: 0x%02x = 0x%02x\n", chip,
+ reg, val);
+ }
+ }
+}
+
+static int proc_init(struct snd_akm4xxx *ak)
+{
+ struct snd_info_entry *entry;
+ int err;
+ err = snd_card_proc_new(ak->card, ak->name, &entry);
+ if (err < 0)
+ return err;
+ snd_info_set_text_ops(entry, ak, proc_regs_read);
+ return 0;
+}
+#else /* !CONFIG_PROC_FS */
+static int proc_init(struct snd_akm4xxx *ak) {}
+#endif
+
int snd_akm4xxx_build_controls(struct snd_akm4xxx *ak)
{
int err, num_emphs;
@@ -845,18 +914,21 @@ int snd_akm4xxx_build_controls(struct snd_akm4xxx *ak)
err = build_adc_controls(ak);
if (err < 0)
return err;
-
if (ak->type == SND_AK4355 || ak->type == SND_AK4358)
num_emphs = 1;
+ else if (ak->type == SND_AK4620)
+ num_emphs = 0;
else
num_emphs = ak->num_dacs / 2;
err = build_deemphasis(ak, num_emphs);
if (err < 0)
return err;
+ err = proc_init(ak);
+ if (err < 0)
+ return err;
return 0;
}
-
EXPORT_SYMBOL(snd_akm4xxx_build_controls);
static int __init alsa_akm4xxx_module_init(void)
diff --git a/include/ak4xxx-adda.h b/include/ak4xxx-adda.h
index 891cf1a..030b87c 100644
--- a/include/ak4xxx-adda.h
+++ b/include/ak4xxx-adda.h
@@ -68,7 +68,7 @@ struct snd_akm4xxx {
enum {
SND_AK4524, SND_AK4528, SND_AK4529,
SND_AK4355, SND_AK4358, SND_AK4381,
- SND_AK5365
+ SND_AK5365, SND_AK4620,
} type;
/* (array) information of combined codecs */
@@ -76,6 +76,9 @@ struct snd_akm4xxx {
const struct snd_akm4xxx_adc_channel *adc_info;
struct snd_ak4xxx_ops ops;
+ unsigned int num_chips;
+ unsigned int total_regs;
+ const char *name;
};
void snd_akm4xxx_write(struct snd_akm4xxx *ak, int chip, unsigned char reg,
diff --git a/pci/ice1712/juli.c b/pci/ice1712/juli.c
index fd948bf..4789e8b 100644
--- a/pci/ice1712/juli.c
+++ b/pci/ice1712/juli.c
@@ -412,25 +412,6 @@ static struct snd_kcontrol_new juli_mute_controls[] __devinitdata = {
},
};
-
-static void ak4358_proc_regs_read(struct snd_info_entry *entry,
- struct snd_info_buffer *buffer)
-{
- struct snd_ice1712 *ice = (struct snd_ice1712 *)entry->private_data;
- int reg, val;
- for (reg = 0; reg <= 0xf; reg++) {
- val = snd_akm4xxx_get(ice->akm, 0, reg);
- snd_iprintf(buffer, "0x%02x = 0x%02x\n", reg, val);
- }
-}
-
-static void ak4358_proc_init(struct snd_ice1712 *ice)
-{
- struct snd_info_entry *entry;
- if (!snd_card_proc_new(ice->card, "ak4358_codec", &entry))
- snd_info_set_text_ops(entry, ice, ak4358_proc_regs_read);
-}
-
static char *slave_vols[] __devinitdata = {
PCM_VOLUME,
MONITOR_AN_IN_VOLUME,
@@ -496,8 +477,6 @@ static int __devinit juli_add_controls(struct snd_ice1712 *ice)
/* only capture SPDIF over AK4114 */
err = snd_ak4114_build(spec->ak4114, NULL,
ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
-
- ak4358_proc_init(ice);
if (err < 0)
return err;
return 0;
--
1.5.6.3
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 3/7] ak4113 support
2009-09-16 20:25 ` [PATCH 2/7] ak4620 support, codec regs listed in proc pavel.hofman
@ 2009-09-16 20:25 ` pavel.hofman
2009-09-16 20:25 ` [PATCH 4/7] ice1724 - adding GPIO routines for mask and direction pavel.hofman
0 siblings, 1 reply; 23+ messages in thread
From: pavel.hofman @ 2009-09-16 20:25 UTC (permalink / raw)
To: patch; +Cc: Pavel Hofman, alsa-devel
From: Pavel Hofman <pavel.hofman@ivitera.com>
* complete support for ak4113
* based on code for ak4114 and ak4117
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
diff --git a/i2c/other/Makefile b/i2c/other/Makefile
index 703d954..2dad40f 100644
--- a/i2c/other/Makefile
+++ b/i2c/other/Makefile
@@ -5,6 +5,7 @@
snd-ak4114-objs := ak4114.o
snd-ak4117-objs := ak4117.o
+snd-ak4113-objs := ak4113.o
snd-ak4xxx-adda-objs := ak4xxx-adda.o
snd-pt2258-objs := pt2258.o
snd-tea575x-tuner-objs := tea575x-tuner.o
@@ -12,5 +13,5 @@ snd-tea575x-tuner-objs := tea575x-tuner.o
# Module Dependency
obj-$(CONFIG_SND_PDAUDIOCF) += snd-ak4117.o
obj-$(CONFIG_SND_ICE1712) += snd-ak4xxx-adda.o
-obj-$(CONFIG_SND_ICE1724) += snd-ak4114.o snd-ak4xxx-adda.o snd-pt2258.o
+obj-$(CONFIG_SND_ICE1724) += snd-ak4114.o snd-ak4113.o snd-ak4xxx-adda.o snd-pt2258.o
obj-$(CONFIG_SND_FM801_TEA575X) += snd-tea575x-tuner.o
diff --git a/i2c/other/ak4113.c b/i2c/other/ak4113.c
new file mode 100644
index 0000000..fff62cc
--- /dev/null
+++ b/i2c/other/ak4113.c
@@ -0,0 +1,639 @@
+/*
+ * Routines for control of the AK4113 via I2C/4-wire serial interface
+ * IEC958 (S/PDIF) receiver by Asahi Kasei
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ * Copyright (c) by Pavel Hofman <pavel.hofman@ivitera.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/ak4113.h>
+#include <sound/asoundef.h>
+#include <sound/info.h>
+
+MODULE_AUTHOR("Pavel Hofman <pavel.hofman@ivitera.com>");
+MODULE_DESCRIPTION("AK4113 IEC958 (S/PDIF) receiver by Asahi Kasei");
+MODULE_LICENSE("GPL");
+
+#define AK4113_ADDR 0x00 /* fixed address */
+
+static void ak4113_stats(struct work_struct *work);
+static void ak4113_init_regs(struct ak4113 *chip);
+
+
+static void reg_write(struct ak4113 *ak4113, unsigned char reg,
+ unsigned char val)
+{
+ ak4113->write(ak4113->private_data, reg, val);
+ if (reg < sizeof(ak4113->regmap))
+ ak4113->regmap[reg] = val;
+}
+
+static inline unsigned char reg_read(struct ak4113 *ak4113, unsigned char reg)
+{
+ return ak4113->read(ak4113->private_data, reg);
+}
+
+static void snd_ak4113_free(struct ak4113 *chip)
+{
+ chip->init = 1; /* don't schedule new work */
+ mb();
+ cancel_delayed_work(&chip->work);
+ flush_scheduled_work();
+ kfree(chip);
+}
+
+static int snd_ak4113_dev_free(struct snd_device *device)
+{
+ struct ak4113 *chip = device->device_data;
+ snd_ak4113_free(chip);
+ return 0;
+}
+
+int snd_ak4113_create(struct snd_card *card, ak4113_read_t *read,
+ ak4113_write_t *write, const unsigned char pgm[5],
+ void *private_data, struct ak4113 **r_ak4113)
+{
+ struct ak4113 *chip;
+ int err = 0;
+ unsigned char reg;
+ static struct snd_device_ops ops = {
+ .dev_free = snd_ak4113_dev_free,
+ };
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (chip == NULL)
+ return -ENOMEM;
+ spin_lock_init(&chip->lock);
+ chip->card = card;
+ chip->read = read;
+ chip->write = write;
+ chip->private_data = private_data;
+ INIT_DELAYED_WORK(&chip->work, ak4113_stats);
+
+ for (reg = 0; reg < AK4113_WRITABLE_REGS ; reg++)
+ chip->regmap[reg] = pgm[reg];
+ ak4113_init_regs(chip);
+
+ chip->rcs0 = reg_read(chip, AK4113_REG_RCS0) & ~(AK4113_QINT |
+ AK4113_CINT | AK4113_STC);
+ chip->rcs1 = reg_read(chip, AK4113_REG_RCS1);
+ chip->rcs2 = reg_read(chip, AK4113_REG_RCS2);
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+ if (err < 0)
+ goto __fail;
+
+ if (r_ak4113)
+ *r_ak4113 = chip;
+ return 0;
+
+__fail:
+ snd_ak4113_free(chip);
+ return err < 0 ? err : -EIO;
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_create);
+
+void snd_ak4113_reg_write(struct ak4113 *chip, unsigned char reg,
+ unsigned char mask, unsigned char val)
+{
+ if (reg >= AK4113_WRITABLE_REGS)
+ return;
+ reg_write(chip, reg, (chip->regmap[reg] & ~mask) | val);
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_reg_write);
+
+static void ak4113_init_regs(struct ak4113 *chip)
+{
+ unsigned char old = chip->regmap[AK4113_REG_PWRDN], reg;
+
+ /* bring the chip to reset state and powerdown state */
+ reg_write(chip, AK4113_REG_PWRDN, old & ~(AK4113_RST|AK4113_PWN));
+ udelay(200);
+ /* release reset, but leave powerdown */
+ reg_write(chip, AK4113_REG_PWRDN, (old | AK4113_RST) & ~AK4113_PWN);
+ udelay(200);
+ for (reg = 1; reg < AK4113_WRITABLE_REGS; reg++)
+ reg_write(chip, reg, chip->regmap[reg]);
+ /* release powerdown, everything is initialized now */
+ reg_write(chip, AK4113_REG_PWRDN, old | AK4113_RST | AK4113_PWN);
+}
+
+void snd_ak4113_reinit(struct ak4113 *chip)
+{
+ chip->init = 1;
+ mb();
+ flush_scheduled_work();
+ ak4113_init_regs(chip);
+ /* bring up statistics / event queing */
+ chip->init = 0;
+ if (chip->kctls[0])
+ schedule_delayed_work(&chip->work, HZ / 10);
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_reinit);
+
+static unsigned int external_rate(unsigned char rcs1)
+{
+ switch (rcs1 & (AK4113_FS0|AK4113_FS1|AK4113_FS2|AK4113_FS3)) {
+ case AK4113_FS_8000HZ:
+ return 8000;
+ case AK4113_FS_11025HZ:
+ return 11025;
+ case AK4113_FS_16000HZ:
+ return 16000;
+ case AK4113_FS_22050HZ:
+ return 22050;
+ case AK4113_FS_24000HZ:
+ return 24000;
+ case AK4113_FS_32000HZ:
+ return 32000;
+ case AK4113_FS_44100HZ:
+ return 44100;
+ case AK4113_FS_48000HZ:
+ return 48000;
+ case AK4113_FS_64000HZ:
+ return 64000;
+ case AK4113_FS_88200HZ:
+ return 88200;
+ case AK4113_FS_96000HZ:
+ return 96000;
+ case AK4113_FS_176400HZ:
+ return 176400;
+ case AK4113_FS_192000HZ:
+ return 192000;
+ default:
+ return 0;
+ }
+}
+
+static int snd_ak4113_in_error_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = LONG_MAX;
+ return 0;
+}
+
+static int snd_ak4113_in_error_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+ long *ptr;
+
+ spin_lock_irq(&chip->lock);
+ ptr = (long *)(((char *)chip) + kcontrol->private_value);
+ ucontrol->value.integer.value[0] = *ptr;
+ *ptr = 0;
+ spin_unlock_irq(&chip->lock);
+ return 0;
+}
+
+#define snd_ak4113_in_bit_info snd_ctl_boolean_mono_info
+
+static int snd_ak4113_in_bit_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+ unsigned char reg = kcontrol->private_value & 0xff;
+ unsigned char bit = (kcontrol->private_value >> 8) & 0xff;
+ unsigned char inv = (kcontrol->private_value >> 31) & 1;
+
+ ucontrol->value.integer.value[0] =
+ ((reg_read(chip, reg) & (1 << bit)) ? 1 : 0) ^ inv;
+ return 0;
+}
+
+static int snd_ak4113_rx_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 5;
+ return 0;
+}
+
+static int snd_ak4113_rx_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.integer.value[0] =
+ (AK4113_IPS(chip->regmap[AK4113_REG_IO1]));
+ return 0;
+}
+
+static int snd_ak4113_rx_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+ int change;
+ u8 old_val;
+
+ spin_lock_irq(&chip->lock);
+ old_val = chip->regmap[AK4113_REG_IO1];
+ change = ucontrol->value.integer.value[0] != AK4113_IPS(old_val);
+ if (change)
+ reg_write(chip, AK4113_REG_IO1,
+ (old_val & (~AK4113_IPS(0xff))) |
+ (AK4113_IPS(ucontrol->value.integer.value[0])));
+ spin_unlock_irq(&chip->lock);
+ return change;
+}
+
+static int snd_ak4113_rate_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 192000;
+ return 0;
+}
+
+static int snd_ak4113_rate_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.integer.value[0] = external_rate(reg_read(chip,
+ AK4113_REG_RCS1));
+ return 0;
+}
+
+static int snd_ak4113_spdif_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+ uinfo->count = 1;
+ return 0;
+}
+
+static int snd_ak4113_spdif_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+ unsigned i;
+
+ for (i = 0; i < AK4113_REG_RXCSB_SIZE; i++)
+ ucontrol->value.iec958.status[i] = reg_read(chip,
+ AK4113_REG_RXCSB0 + i);
+ return 0;
+}
+
+static int snd_ak4113_spdif_mask_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+ uinfo->count = 1;
+ return 0;
+}
+
+static int snd_ak4113_spdif_mask_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ memset(ucontrol->value.iec958.status, 0xff, AK4113_REG_RXCSB_SIZE);
+ return 0;
+}
+
+static int snd_ak4113_spdif_pinfo(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 0xffff;
+ uinfo->count = 4;
+ return 0;
+}
+
+static int snd_ak4113_spdif_pget(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+ unsigned short tmp;
+
+ ucontrol->value.integer.value[0] = 0xf8f2;
+ ucontrol->value.integer.value[1] = 0x4e1f;
+ tmp = reg_read(chip, AK4113_REG_Pc0) |
+ (reg_read(chip, AK4113_REG_Pc1) << 8);
+ ucontrol->value.integer.value[2] = tmp;
+ tmp = reg_read(chip, AK4113_REG_Pd0) |
+ (reg_read(chip, AK4113_REG_Pd1) << 8);
+ ucontrol->value.integer.value[3] = tmp;
+ return 0;
+}
+
+static int snd_ak4113_spdif_qinfo(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
+ uinfo->count = AK4113_REG_QSUB_SIZE;
+ return 0;
+}
+
+static int snd_ak4113_spdif_qget(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+ unsigned i;
+
+ for (i = 0; i < AK4113_REG_QSUB_SIZE; i++)
+ ucontrol->value.bytes.data[i] = reg_read(chip,
+ AK4113_REG_QSUB_ADDR + i);
+ return 0;
+}
+
+/* Don't forget to change AK4113_CONTROLS define!!! */
+static struct snd_kcontrol_new snd_ak4113_iec958_controls[] = {
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 Parity Errors",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_in_error_info,
+ .get = snd_ak4113_in_error_get,
+ .private_value = offsetof(struct ak4113, parity_errors),
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 V-Bit Errors",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_in_error_info,
+ .get = snd_ak4113_in_error_get,
+ .private_value = offsetof(struct ak4113, v_bit_errors),
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 C-CRC Errors",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_in_error_info,
+ .get = snd_ak4113_in_error_get,
+ .private_value = offsetof(struct ak4113, ccrc_errors),
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 Q-CRC Errors",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_in_error_info,
+ .get = snd_ak4113_in_error_get,
+ .private_value = offsetof(struct ak4113, qcrc_errors),
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 External Rate",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_rate_info,
+ .get = snd_ak4113_rate_get,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, MASK),
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .info = snd_ak4113_spdif_mask_info,
+ .get = snd_ak4113_spdif_mask_get,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT),
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_spdif_info,
+ .get = snd_ak4113_spdif_get,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 Preample Capture Default",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_spdif_pinfo,
+ .get = snd_ak4113_spdif_pget,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 Q-subcode Capture Default",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_spdif_qinfo,
+ .get = snd_ak4113_spdif_qget,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 Audio",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_in_bit_info,
+ .get = snd_ak4113_in_bit_get,
+ .private_value = (1<<31) | (1<<8) | AK4113_REG_RCS0,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 Non-PCM Bitstream",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_in_bit_info,
+ .get = snd_ak4113_in_bit_get,
+ .private_value = (0<<8) | AK4113_REG_RCS1,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 DTS Bitstream",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4113_in_bit_info,
+ .get = snd_ak4113_in_bit_get,
+ .private_value = (1<<8) | AK4113_REG_RCS1,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "AK4113 Input Select",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_WRITE,
+ .info = snd_ak4113_rx_info,
+ .get = snd_ak4113_rx_get,
+ .put = snd_ak4113_rx_put,
+}
+};
+
+static void snd_ak4113_proc_regs_read(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ struct ak4113 *ak4113 = entry->private_data;
+ int reg, val;
+ /* all ak4113 registers 0x00 - 0x1c */
+ for (reg = 0; reg < 0x1d; reg++) {
+ val = reg_read(ak4113, reg);
+ snd_iprintf(buffer, "0x%02x = 0x%02x\n", reg, val);
+ }
+}
+
+static void snd_ak4113_proc_init(struct ak4113 *ak4113)
+{
+ struct snd_info_entry *entry;
+ if (!snd_card_proc_new(ak4113->card, "ak4113", &entry))
+ snd_info_set_text_ops(entry, ak4113, snd_ak4113_proc_regs_read);
+}
+
+int snd_ak4113_build(struct ak4113 *ak4113,
+ struct snd_pcm_substream *cap_substream)
+{
+ struct snd_kcontrol *kctl;
+ unsigned int idx;
+ int err;
+
+ if (snd_BUG_ON(!cap_substream))
+ return -EINVAL;
+ ak4113->substream = cap_substream;
+ for (idx = 0; idx < AK4113_CONTROLS; idx++) {
+ kctl = snd_ctl_new1(&snd_ak4113_iec958_controls[idx], ak4113);
+ if (kctl == NULL)
+ return -ENOMEM;
+ kctl->id.device = cap_substream->pcm->device;
+ kctl->id.subdevice = cap_substream->number;
+ err = snd_ctl_add(ak4113->card, kctl);
+ if (err < 0)
+ return err;
+ ak4113->kctls[idx] = kctl;
+ }
+ snd_ak4113_proc_init(ak4113);
+ /* trigger workq */
+ schedule_delayed_work(&ak4113->work, HZ / 10);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_build);
+
+int snd_ak4113_external_rate(struct ak4113 *ak4113)
+{
+ unsigned char rcs1;
+
+ rcs1 = reg_read(ak4113, AK4113_REG_RCS1);
+ return external_rate(rcs1);
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_external_rate);
+
+int snd_ak4113_check_rate_and_errors(struct ak4113 *ak4113, unsigned int flags)
+{
+ struct snd_pcm_runtime *runtime =
+ ak4113->substream ? ak4113->substream->runtime : NULL;
+ unsigned long _flags;
+ int res = 0;
+ unsigned char rcs0, rcs1, rcs2;
+ unsigned char c0, c1;
+
+ rcs1 = reg_read(ak4113, AK4113_REG_RCS1);
+ if (flags & AK4113_CHECK_NO_STAT)
+ goto __rate;
+ rcs0 = reg_read(ak4113, AK4113_REG_RCS0);
+ rcs2 = reg_read(ak4113, AK4113_REG_RCS2);
+ spin_lock_irqsave(&ak4113->lock, _flags);
+ if (rcs0 & AK4113_PAR)
+ ak4113->parity_errors++;
+ if (rcs0 & AK4113_V)
+ ak4113->v_bit_errors++;
+ if (rcs2 & AK4113_CCRC)
+ ak4113->ccrc_errors++;
+ if (rcs2 & AK4113_QCRC)
+ ak4113->qcrc_errors++;
+ c0 = (ak4113->rcs0 & (AK4113_QINT | AK4113_CINT | AK4113_STC |
+ AK4113_AUDION | AK4113_AUTO | AK4113_UNLCK)) ^
+ (rcs0 & (AK4113_QINT | AK4113_CINT | AK4113_STC |
+ AK4113_AUDION | AK4113_AUTO | AK4113_UNLCK));
+ c1 = (ak4113->rcs1 & (AK4113_DTSCD | AK4113_NPCM | AK4113_PEM |
+ AK4113_DAT | 0xf0)) ^
+ (rcs1 & (AK4113_DTSCD | AK4113_NPCM | AK4113_PEM |
+ AK4113_DAT | 0xf0));
+ ak4113->rcs0 = rcs0 & ~(AK4113_QINT | AK4113_CINT | AK4113_STC);
+ ak4113->rcs1 = rcs1;
+ ak4113->rcs2 = rcs2;
+ spin_unlock_irqrestore(&ak4113->lock, _flags);
+
+ if (rcs0 & AK4113_PAR)
+ snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4113->kctls[0]->id);
+ if (rcs0 & AK4113_V)
+ snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4113->kctls[1]->id);
+ if (rcs2 & AK4113_CCRC)
+ snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4113->kctls[2]->id);
+ if (rcs2 & AK4113_QCRC)
+ snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4113->kctls[3]->id);
+
+ /* rate change */
+ if (c1 & 0xf0)
+ snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4113->kctls[4]->id);
+
+ if ((c1 & AK4113_PEM) | (c0 & AK4113_CINT))
+ snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4113->kctls[6]->id);
+ if (c0 & AK4113_QINT)
+ snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4113->kctls[8]->id);
+
+ if (c0 & AK4113_AUDION)
+ snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4113->kctls[9]->id);
+ if (c1 & AK4113_NPCM)
+ snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4113->kctls[10]->id);
+ if (c1 & AK4113_DTSCD)
+ snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4113->kctls[11]->id);
+
+ if (ak4113->change_callback && (c0 | c1) != 0)
+ ak4113->change_callback(ak4113, c0, c1);
+
+__rate:
+ /* compare rate */
+ res = external_rate(rcs1);
+ if (!(flags & AK4113_CHECK_NO_RATE) && runtime &&
+ (runtime->rate != res)) {
+ snd_pcm_stream_lock_irqsave(ak4113->substream, _flags);
+ if (snd_pcm_running(ak4113->substream)) {
+ /*printk(KERN_DEBUG "rate changed (%i <- %i)\n",
+ * runtime->rate, res); */
+ snd_pcm_stop(ak4113->substream,
+ SNDRV_PCM_STATE_DRAINING);
+ wake_up(&runtime->sleep);
+ res = 1;
+ }
+ snd_pcm_stream_unlock_irqrestore(ak4113->substream, _flags);
+ }
+ return res;
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_check_rate_and_errors);
+
+static void ak4113_stats(struct work_struct *work)
+{
+ struct ak4113 *chip = container_of(work, struct ak4113, work.work);
+
+ if (!chip->init)
+ snd_ak4113_check_rate_and_errors(chip, chip->check_flags);
+
+ schedule_delayed_work(&chip->work, HZ / 10);
+}
diff --git a/include/ak4113.h b/include/ak4113.h
new file mode 100644
index 0000000..8988eda
--- /dev/null
+++ b/include/ak4113.h
@@ -0,0 +1,321 @@
+#ifndef __SOUND_AK4113_H
+#define __SOUND_AK4113_H
+
+/*
+ * Routines for Asahi Kasei AK4113
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ * Copyright (c) by Pavel Hofman <pavel.hofman@ivitera.com>,
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/* AK4113 registers */
+/* power down */
+#define AK4113_REG_PWRDN 0x00
+/* format control */
+#define AK4113_REG_FORMAT 0x01
+/* input/output control */
+#define AK4113_REG_IO0 0x02
+/* input/output control */
+#define AK4113_REG_IO1 0x03
+/* interrupt0 mask */
+#define AK4113_REG_INT0_MASK 0x04
+/* interrupt1 mask */
+#define AK4113_REG_INT1_MASK 0x05
+/* DAT mask & DTS select */
+#define AK4113_REG_DATDTS 0x06
+/* receiver status 0 */
+#define AK4113_REG_RCS0 0x07
+/* receiver status 1 */
+#define AK4113_REG_RCS1 0x08
+/* receiver status 2 */
+#define AK4113_REG_RCS2 0x09
+/* RX channel status byte 0 */
+#define AK4113_REG_RXCSB0 0x0a
+/* RX channel status byte 1 */
+#define AK4113_REG_RXCSB1 0x0b
+/* RX channel status byte 2 */
+#define AK4113_REG_RXCSB2 0x0c
+/* RX channel status byte 3 */
+#define AK4113_REG_RXCSB3 0x0d
+/* RX channel status byte 4 */
+#define AK4113_REG_RXCSB4 0x0e
+/* burst preamble Pc byte 0 */
+#define AK4113_REG_Pc0 0x0f
+/* burst preamble Pc byte 1 */
+#define AK4113_REG_Pc1 0x10
+/* burst preamble Pd byte 0 */
+#define AK4113_REG_Pd0 0x11
+/* burst preamble Pd byte 1 */
+#define AK4113_REG_Pd1 0x12
+/* Q-subcode address + control */
+#define AK4113_REG_QSUB_ADDR 0x13
+/* Q-subcode track */
+#define AK4113_REG_QSUB_TRACK 0x14
+/* Q-subcode index */
+#define AK4113_REG_QSUB_INDEX 0x15
+/* Q-subcode minute */
+#define AK4113_REG_QSUB_MINUTE 0x16
+/* Q-subcode second */
+#define AK4113_REG_QSUB_SECOND 0x17
+/* Q-subcode frame */
+#define AK4113_REG_QSUB_FRAME 0x18
+/* Q-subcode zero */
+#define AK4113_REG_QSUB_ZERO 0x19
+/* Q-subcode absolute minute */
+#define AK4113_REG_QSUB_ABSMIN 0x1a
+/* Q-subcode absolute second */
+#define AK4113_REG_QSUB_ABSSEC 0x1b
+/* Q-subcode absolute frame */
+#define AK4113_REG_QSUB_ABSFRM 0x1c
+
+/* sizes */
+#define AK4113_REG_RXCSB_SIZE ((AK4113_REG_RXCSB4-AK4113_REG_RXCSB0)+1)
+#define AK4113_REG_QSUB_SIZE ((AK4113_REG_QSUB_ABSFRM-AK4113_REG_QSUB_ADDR)\
+ +1)
+
+#define AK4113_WRITABLE_REGS (AK4113_REG_DATDTS + 1)
+
+/* AK4113_REG_PWRDN bits */
+/* Channel Status Select */
+#define AK4113_CS12 (1<<7)
+/* Block Start & C/U Output Mode */
+#define AK4113_BCU (1<<6)
+/* Master Clock Operation Select */
+#define AK4113_CM1 (1<<5)
+/* Master Clock Operation Select */
+#define AK4113_CM0 (1<<4)
+/* Master Clock Frequency Select */
+#define AK4113_OCKS1 (1<<3)
+/* Master Clock Frequency Select */
+#define AK4113_OCKS0 (1<<2)
+/* 0 = power down, 1 = normal operation */
+#define AK4113_PWN (1<<1)
+/* 0 = reset & initialize (except thisregister), 1 = normal operation */
+#define AK4113_RST (1<<0)
+
+/* AK4113_REQ_FORMAT bits */
+/* V/TX Output select: 0 = Validity Flag Output, 1 = TX */
+#define AK4113_VTX (1<<7)
+/* Audio Data Control */
+#define AK4113_DIF2 (1<<6)
+/* Audio Data Control */
+#define AK4113_DIF1 (1<<5)
+/* Audio Data Control */
+#define AK4113_DIF0 (1<<4)
+/* Deemphasis Autodetect Enable (1 = enable) */
+#define AK4113_DEAU (1<<3)
+/* 32kHz-48kHz Deemphasis Control */
+#define AK4113_DEM1 (1<<2)
+/* 32kHz-48kHz Deemphasis Control */
+#define AK4113_DEM0 (1<<1)
+#define AK4113_DEM_OFF (AK4113_DEM0)
+#define AK4113_DEM_44KHZ (0)
+#define AK4113_DEM_48KHZ (AK4113_DEM1)
+#define AK4113_DEM_32KHZ (AK4113_DEM0|AK4113_DEM1)
+/* STDO: 16-bit, right justified */
+#define AK4113_DIF_16R (0)
+/* STDO: 18-bit, right justified */
+#define AK4113_DIF_18R (AK4113_DIF0)
+/* STDO: 20-bit, right justified */
+#define AK4113_DIF_20R (AK4113_DIF1)
+/* STDO: 24-bit, right justified */
+#define AK4113_DIF_24R (AK4113_DIF1|AK4113_DIF0)
+/* STDO: 24-bit, left justified */
+#define AK4113_DIF_24L (AK4113_DIF2)
+/* STDO: I2S */
+#define AK4113_DIF_24I2S (AK4113_DIF2|AK4113_DIF0)
+/* STDO: 24-bit, left justified; LRCLK, BICK = Input */
+#define AK4113_DIF_I24L (AK4113_DIF2|AK4113_DIF1)
+/* STDO: I2S; LRCLK, BICK = Input */
+#define AK4113_DIF_I24I2S (AK4113_DIF2|AK4113_DIF1|AK4113_DIF0)
+
+/* AK4113_REG_IO0 */
+/* XTL1=0,XTL0=0 -> 11.2896Mhz; XTL1=0,XTL0=1 -> 12.288Mhz */
+#define AK4113_XTL1 (1<<6)
+/* XTL1=1,XTL0=0 -> 24.576Mhz; XTL1=1,XTL0=1 -> use channel status */
+#define AK4113_XTL0 (1<<5)
+/* Block Start Signal Output: 0 = U-bit, 1 = C-bit (req. BCU = 1) */
+#define AK4113_UCE (1<<4)
+/* TX Output Enable (1 = enable) */
+#define AK4113_TXE (1<<3)
+/* Output Through Data Selector for TX pin */
+#define AK4113_OPS2 (1<<2)
+/* Output Through Data Selector for TX pin */
+#define AK4113_OPS1 (1<<1)
+/* Output Through Data Selector for TX pin */
+#define AK4113_OPS0 (1<<0)
+/* 11.2896 MHz ref. Xtal freq. */
+#define AK4113_XTL_11_2896M (0)
+/* 12.288 MHz ref. Xtal freq. */
+#define AK4113_XTL_12_288M (AK4113_XTL0)
+/* 24.576 MHz ref. Xtal freq. */
+#define AK4113_XTL_24_576M (AK4113_XTL1)
+
+/* AK4113_REG_IO1 */
+/* Interrupt 0 pin Hold */
+#define AK4113_EFH1 (1<<7)
+/* Interrupt 0 pin Hold */
+#define AK4113_EFH0 (1<<6)
+#define AK4113_EFH_512LRCLK (0)
+#define AK4113_EFH_1024LRCLK (AK4113_EFH0)
+#define AK4113_EFH_2048LRCLK (AK4113_EFH1)
+#define AK4113_EFH_4096LRCLK (AK4113_EFH1|AK4113_EFH0)
+/* PLL Lock Time: 0 = 384/fs, 1 = 1/fs */
+#define AK4113_FAST (1<<5)
+/* MCKO2 Output Select: 0 = CMx/OCKSx, 1 = Xtal */
+#define AK4113_XMCK (1<<4)
+/* MCKO2 Output Freq. Select: 0 = x1, 1 = x0.5 (req. XMCK = 1) */
+#define AK4113_DIV (1<<3)
+/* Input Recovery Data Select */
+#define AK4113_IPS2 (1<<2)
+/* Input Recovery Data Select */
+#define AK4113_IPS1 (1<<1)
+/* Input Recovery Data Select */
+#define AK4113_IPS0 (1<<0)
+#define AK4113_IPS(x) ((x)&7)
+
+/* AK4113_REG_INT0_MASK && AK4113_REG_INT1_MASK*/
+/* mask enable for QINT bit */
+#define AK4113_MQI (1<<7)
+/* mask enable for AUTO bit */
+#define AK4113_MAUT (1<<6)
+/* mask enable for CINT bit */
+#define AK4113_MCIT (1<<5)
+/* mask enable for UNLOCK bit */
+#define AK4113_MULK (1<<4)
+/* mask enable for V bit */
+#define AK4113_V (1<<3)
+/* mask enable for STC bit */
+#define AK4113_STC (1<<2)
+/* mask enable for AUDN bit */
+#define AK4113_MAN (1<<1)
+/* mask enable for PAR bit */
+#define AK4113_MPR (1<<0)
+
+/* AK4113_REG_DATDTS */
+/* DAT Start ID Counter */
+#define AK4113_DCNT (1<<4)
+/* DTS-CD 16-bit Sync Word Detect */
+#define AK4113_DTS16 (1<<3)
+/* DTS-CD 14-bit Sync Word Detect */
+#define AK4113_DTS14 (1<<2)
+/* mask enable for DAT bit (if 1, no INT1 effect */
+#define AK4113_MDAT1 (1<<1)
+/* mask enable for DAT bit (if 1, no INT0 effect */
+#define AK4113_MDAT0 (1<<0)
+
+/* AK4113_REG_RCS0 */
+/* Q-subcode buffer interrupt, 0 = no change, 1 = changed */
+#define AK4113_QINT (1<<7)
+/* Non-PCM or DTS stream auto detection, 0 = no detect, 1 = detect */
+#define AK4113_AUTO (1<<6)
+/* channel status buffer interrupt, 0 = no change, 1 = change */
+#define AK4113_CINT (1<<5)
+/* PLL lock status, 0 = lock, 1 = unlock */
+#define AK4113_UNLCK (1<<4)
+/* Validity bit, 0 = valid, 1 = invalid */
+#define AK4113_V (1<<3)
+/* sampling frequency or Pre-emphasis change, 0 = no detect, 1 = detect */
+#define AK4113_STC (1<<2)
+/* audio bit output, 0 = audio, 1 = non-audio */
+#define AK4113_AUDION (1<<1)
+/* parity error or biphase error status, 0 = no error, 1 = error */
+#define AK4113_PAR (1<<0)
+
+/* AK4113_REG_RCS1 */
+/* sampling frequency detection */
+#define AK4113_FS3 (1<<7)
+#define AK4113_FS2 (1<<6)
+#define AK4113_FS1 (1<<5)
+#define AK4113_FS0 (1<<4)
+/* Pre-emphasis detect, 0 = OFF, 1 = ON */
+#define AK4113_PEM (1<<3)
+/* DAT Start ID Detect, 0 = no detect, 1 = detect */
+#define AK4113_DAT (1<<2)
+/* DTS-CD bit audio stream detect, 0 = no detect, 1 = detect */
+#define AK4113_DTSCD (1<<1)
+/* Non-PCM bit stream detection, 0 = no detect, 1 = detect */
+#define AK4113_NPCM (1<<0)
+#define AK4113_FS_8000HZ (AK4113_FS3|AK4113_FS0)
+#define AK4113_FS_11025HZ (AK4113_FS2|AK4113_FS0)
+#define AK4113_FS_16000HZ (AK4113_FS2|AK4113_FS1|AK4113_FS0)
+#define AK4113_FS_22050HZ (AK4113_FS2)
+#define AK4113_FS_24000HZ (AK4113_FS2|AK4113_FS1)
+#define AK4113_FS_32000HZ (AK4113_FS1|AK4113_FS0)
+#define AK4113_FS_44100HZ (0)
+#define AK4113_FS_48000HZ (AK4113_FS1)
+#define AK4113_FS_64000HZ (AK4113_FS3|AK4113_FS1|AK4113_FS0)
+#define AK4113_FS_88200HZ (AK4113_FS3)
+#define AK4113_FS_96000HZ (AK4113_FS3|AK4113_FS1)
+#define AK4113_FS_176400HZ (AK4113_FS3|AK4113_FS2)
+#define AK4113_FS_192000HZ (AK4113_FS3|AK4113_FS2|AK4113_FS1)
+
+/* AK4113_REG_RCS2 */
+/* CRC for Q-subcode, 0 = no error, 1 = error */
+#define AK4113_QCRC (1<<1)
+/* CRC for channel status, 0 = no error, 1 = error */
+#define AK4113_CCRC (1<<0)
+
+/* flags for snd_ak4113_check_rate_and_errors() */
+#define AK4113_CHECK_NO_STAT (1<<0) /* no statistics */
+#define AK4113_CHECK_NO_RATE (1<<1) /* no rate check */
+
+#define AK4113_CONTROLS 13
+
+typedef void (ak4113_write_t)(void *private_data, unsigned char addr,
+ unsigned char data);
+typedef unsigned char (ak4113_read_t)(void *private_data, unsigned char addr);
+
+struct ak4113 {
+ struct snd_card *card;
+ ak4113_write_t *write;
+ ak4113_read_t *read;
+ void *private_data;
+ unsigned int init:1;
+ spinlock_t lock;
+ unsigned char regmap[AK4113_WRITABLE_REGS];
+ struct snd_kcontrol *kctls[AK4113_CONTROLS];
+ struct snd_pcm_substream *substream;
+ unsigned long parity_errors;
+ unsigned long v_bit_errors;
+ unsigned long qcrc_errors;
+ unsigned long ccrc_errors;
+ unsigned char rcs0;
+ unsigned char rcs1;
+ unsigned char rcs2;
+ struct delayed_work work;
+ unsigned int check_flags;
+ void *change_callback_private;
+ void (*change_callback)(struct ak4113 *ak4113, unsigned char c0,
+ unsigned char c1);
+};
+
+int snd_ak4113_create(struct snd_card *card, ak4113_read_t *read,
+ ak4113_write_t *write,
+ const unsigned char pgm[AK4113_WRITABLE_REGS],
+ void *private_data, struct ak4113 **r_ak4113);
+void snd_ak4113_reg_write(struct ak4113 *ak4113, unsigned char reg,
+ unsigned char mask, unsigned char val);
+void snd_ak4113_reinit(struct ak4113 *ak4113);
+int snd_ak4113_build(struct ak4113 *ak4113,
+ struct snd_pcm_substream *capture_substream);
+int snd_ak4113_external_rate(struct ak4113 *ak4113);
+int snd_ak4113_check_rate_and_errors(struct ak4113 *ak4113, unsigned int flags);
+
+#endif /* __SOUND_AK4113_H */
+
diff --git a/scripts/ksync.conf b/scripts/ksync.conf
index 65cfde1..e3bbceb 100644
--- a/scripts/ksync.conf
+++ b/scripts/ksync.conf
@@ -174,6 +174,8 @@ comment.map.alsa-driver::= \
/i2c/l3:"L3 drivers" \
/include/tea575x-tuner.h:"TEA575x tuner" \
/i2c/other/tea575x-tuner.c:"TEA575x tuner" \
+ /include/ak4113.h:"AK4113 receiver" \
+ /i2c/other/ak4113.c:"AK4113 receiver" \
/include/ak4114.h:"AK4114 receiver" \
/i2c/other/ak4114.c:"AK4114 receiver" \
/include/ak4117.h:"AK4117 receiver" \
--
1.5.6.3
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 4/7] ice1724 - adding GPIO routines for mask and direction
2009-09-16 20:25 ` [PATCH 3/7] ak4113 support pavel.hofman
@ 2009-09-16 20:25 ` pavel.hofman
2009-09-16 20:25 ` [PATCH 5/7] ice1724 - pro-rate-locking makes sense only for internal clock mode pavel.hofman
0 siblings, 1 reply; 23+ messages in thread
From: pavel.hofman @ 2009-09-16 20:25 UTC (permalink / raw)
To: patch; +Cc: Pavel Hofman, alsa-devel
From: Pavel Hofman <pavel.hofman@ivitera.com>
* get/set routines for GPIO mask and direction
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
diff --git a/pci/ice1712/ice1712.c b/pci/ice1712/ice1712.c
index cecf1ff..56d8d67 100644
--- a/pci/ice1712/ice1712.c
+++ b/pci/ice1712/ice1712.c
@@ -298,6 +298,16 @@ static void snd_ice1712_set_gpio_dir(struct snd_ice1712 *ice, unsigned int data)
inb(ICEREG(ice, DATA)); /* dummy read for pci-posting */
}
+static unsigned int snd_ice1712_get_gpio_dir(struct snd_ice1712 *ice)
+{
+ return snd_ice1712_read(ice, ICE1712_IREG_GPIO_DIRECTION);
+}
+
+static unsigned int snd_ice1712_get_gpio_mask(struct snd_ice1712 *ice)
+{
+ return snd_ice1712_read(ice, ICE1712_IREG_GPIO_WRITE_MASK);
+}
+
static void snd_ice1712_set_gpio_mask(struct snd_ice1712 *ice, unsigned int data)
{
snd_ice1712_write(ice, ICE1712_IREG_GPIO_WRITE_MASK, data);
@@ -2557,7 +2567,9 @@ static int __devinit snd_ice1712_create(struct snd_card *card,
mutex_init(&ice->i2c_mutex);
mutex_init(&ice->open_mutex);
ice->gpio.set_mask = snd_ice1712_set_gpio_mask;
+ ice->gpio.get_mask = snd_ice1712_get_gpio_mask;
ice->gpio.set_dir = snd_ice1712_set_gpio_dir;
+ ice->gpio.get_dir = snd_ice1712_get_gpio_dir;
ice->gpio.set_data = snd_ice1712_set_gpio_data;
ice->gpio.get_data = snd_ice1712_get_gpio_data;
diff --git a/pci/ice1712/ice1712.h b/pci/ice1712/ice1712.h
index 9da2dae..b31a59d 100644
--- a/pci/ice1712/ice1712.h
+++ b/pci/ice1712/ice1712.h
@@ -359,7 +359,9 @@ struct snd_ice1712 {
unsigned int saved[2]; /* for ewx_i2c */
/* operators */
void (*set_mask)(struct snd_ice1712 *ice, unsigned int data);
+ unsigned int (*get_mask)(struct snd_ice1712 *ice);
void (*set_dir)(struct snd_ice1712 *ice, unsigned int data);
+ unsigned int (*get_dir)(struct snd_ice1712 *ice);
void (*set_data)(struct snd_ice1712 *ice, unsigned int data);
unsigned int (*get_data)(struct snd_ice1712 *ice);
/* misc operators - move to another place? */
@@ -399,6 +401,11 @@ static inline void snd_ice1712_gpio_set_dir(struct snd_ice1712 *ice, unsigned in
ice->gpio.set_dir(ice, bits);
}
+static inline unsigned int snd_ice1712_gpio_get_dir(struct snd_ice1712 *ice)
+{
+ return ice->gpio.get_dir(ice);
+}
+
static inline void snd_ice1712_gpio_set_mask(struct snd_ice1712 *ice, unsigned int bits)
{
ice->gpio.set_mask(ice, bits);
diff --git a/pci/ice1712/ice1724.c b/pci/ice1712/ice1724.c
index af6e001..2213bee 100644
--- a/pci/ice1712/ice1724.c
+++ b/pci/ice1712/ice1724.c
@@ -196,6 +196,12 @@ static void snd_vt1724_set_gpio_dir(struct snd_ice1712 *ice, unsigned int data)
inw(ICEREG1724(ice, GPIO_DIRECTION)); /* dummy read for pci-posting */
}
+/* get gpio direction 0 = read, 1 = write */
+static unsigned int snd_vt1724_get_gpio_dir(struct snd_ice1712 *ice)
+{
+ return inl(ICEREG1724(ice, GPIO_DIRECTION));
+}
+
/* set the gpio mask (0 = writable) */
static void snd_vt1724_set_gpio_mask(struct snd_ice1712 *ice, unsigned int data)
{
@@ -205,6 +211,17 @@ static void snd_vt1724_set_gpio_mask(struct snd_ice1712 *ice, unsigned int data)
inw(ICEREG1724(ice, GPIO_WRITE_MASK)); /* dummy read for pci-posting */
}
+static unsigned int snd_vt1724_get_gpio_mask(struct snd_ice1712 *ice)
+{
+ unsigned int mask;
+ if (!ice->vt1720)
+ mask = (unsigned int)inb(ICEREG1724(ice, GPIO_WRITE_MASK_22));
+ else
+ mask = 0;
+ mask = (mask << 16) | inw(ICEREG1724(ice, GPIO_WRITE_MASK));
+ return mask;
+}
+
static void snd_vt1724_set_gpio_data(struct snd_ice1712 *ice, unsigned int data)
{
outw(data, ICEREG1724(ice, GPIO_DATA));
@@ -2434,7 +2451,9 @@ static int __devinit snd_vt1724_create(struct snd_card *card,
mutex_init(&ice->open_mutex);
mutex_init(&ice->i2c_mutex);
ice->gpio.set_mask = snd_vt1724_set_gpio_mask;
+ ice->gpio.get_mask = snd_vt1724_get_gpio_mask;
ice->gpio.set_dir = snd_vt1724_set_gpio_dir;
+ ice->gpio.get_dir = snd_vt1724_get_gpio_dir;
ice->gpio.set_data = snd_vt1724_set_gpio_data;
ice->gpio.get_data = snd_vt1724_get_gpio_data;
ice->card = card;
--
1.5.6.3
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 5/7] ice1724 - pro-rate-locking makes sense only for internal clock mode
2009-09-16 20:25 ` [PATCH 4/7] ice1724 - adding GPIO routines for mask and direction pavel.hofman
@ 2009-09-16 20:25 ` pavel.hofman
2009-09-16 20:25 ` [PATCH 6/7] Support for multiple external clock types pavel.hofman
0 siblings, 1 reply; 23+ messages in thread
From: pavel.hofman @ 2009-09-16 20:25 UTC (permalink / raw)
To: patch; +Cc: Pavel Hofman, alsa-devel
From: Pavel Hofman <pavel.hofman@ivitera.com>
* pro-rate-locking applies to internal clock mode only
* required rate and current rate are compared for internal clock mode only
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
diff --git a/pci/ice1712/ice1724.c b/pci/ice1712/ice1724.c
index 2213bee..514e153 100644
--- a/pci/ice1712/ice1724.c
+++ b/pci/ice1712/ice1724.c
@@ -118,9 +118,12 @@ static inline int stdclock_is_spdif_master(struct snd_ice1712 *ice)
return (inb(ICEMT1724(ice, RATE)) & VT1724_SPDIF_MASTER) ? 1 : 0;
}
+/*
+ * locking rate makes sense only for internal clock mode
+ */
static inline int is_pro_rate_locked(struct snd_ice1712 *ice)
{
- return ice->is_spdif_master(ice) || PRO_RATE_LOCKED;
+ return (!ice->is_spdif_master(ice)) && PRO_RATE_LOCKED;
}
/*
@@ -668,16 +671,22 @@ static int snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
return -EBUSY;
}
if (!force && is_pro_rate_locked(ice)) {
+ /* comparing required and current rate - makes sense for
+ * internal clock only */
spin_unlock_irqrestore(&ice->reg_lock, flags);
return (rate == ice->cur_rate) ? 0 : -EBUSY;
}
- old_rate = ice->get_rate(ice);
- if (force || (old_rate != rate))
- ice->set_rate(ice, rate);
- else if (rate == ice->cur_rate) {
- spin_unlock_irqrestore(&ice->reg_lock, flags);
- return 0;
+ if (force || !ice->is_spdif_master(ice)) {
+ /* force means the rate was switched by ucontrol, otherwise
+ * setting clock rate for internal clock mode */
+ old_rate = ice->get_rate(ice);
+ if (force || (old_rate != rate))
+ ice->set_rate(ice, rate);
+ else if (rate == ice->cur_rate) {
+ spin_unlock_irqrestore(&ice->reg_lock, flags);
+ return 0;
+ }
}
ice->cur_rate = rate;
--
1.5.6.3
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 6/7] Support for multiple external clock types
2009-09-16 20:25 ` [PATCH 5/7] ice1724 - pro-rate-locking makes sense only for internal clock mode pavel.hofman
@ 2009-09-16 20:25 ` pavel.hofman
2009-09-16 20:25 ` [PATCH 7/7] Infrasonic Quartet support pavel.hofman
0 siblings, 1 reply; 23+ messages in thread
From: pavel.hofman @ 2009-09-16 20:25 UTC (permalink / raw)
To: patch; +Cc: Pavel Hofman, alsa-devel
From: Pavel Hofman <pavel.hofman@ivitera.com>
* Support for customization of the external clock names
* Adding hooks to playback_pro_open and capture_pro_open, allowing e.g.
limiting available stream rates to a single value when the external
clock rate is detected
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
diff --git a/pci/ice1712/ice1712.h b/pci/ice1712/ice1712.h
index b31a59d..4615bca 100644
--- a/pci/ice1712/ice1712.h
+++ b/pci/ice1712/ice1712.h
@@ -379,8 +379,11 @@ struct snd_ice1712 {
unsigned int (*get_rate)(struct snd_ice1712 *ice);
void (*set_rate)(struct snd_ice1712 *ice, unsigned int rate);
unsigned char (*set_mclk)(struct snd_ice1712 *ice, unsigned int rate);
- void (*set_spdif_clock)(struct snd_ice1712 *ice);
-
+ int (*set_spdif_clock)(struct snd_ice1712 *ice, int type);
+ int (*get_spdif_master_type)(struct snd_ice1712 *ice);
+ char **ext_clock_names;
+ int ext_clock_count;
+ void (*pro_open)(struct snd_ice1712 *, struct snd_pcm_substream *);
#ifdef CONFIG_PM
int (*pm_suspend)(struct snd_ice1712 *);
int (*pm_resume)(struct snd_ice1712 *);
diff --git a/pci/ice1712/ice1724.c b/pci/ice1712/ice1724.c
index 514e153..3f11195 100644
--- a/pci/ice1712/ice1724.c
+++ b/pci/ice1712/ice1724.c
@@ -104,6 +104,8 @@ static int PRO_RATE_LOCKED;
static int PRO_RATE_RESET = 1;
static unsigned int PRO_RATE_DEFAULT = 44100;
+static char *ext_clock_names[1] = { "IEC958 In" };
+
/*
* Basic I/O
*/
@@ -1042,6 +1044,8 @@ static int snd_vt1724_playback_pro_open(struct snd_pcm_substream *substream)
VT1724_BUFFER_ALIGN);
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
VT1724_BUFFER_ALIGN);
+ if (ice->pro_open)
+ ice->pro_open(ice, substream);
return 0;
}
@@ -1060,6 +1064,8 @@ static int snd_vt1724_capture_pro_open(struct snd_pcm_substream *substream)
VT1724_BUFFER_ALIGN);
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
VT1724_BUFFER_ALIGN);
+ if (ice->pro_open)
+ ice->pro_open(ice, substream);
return 0;
}
@@ -1813,15 +1819,21 @@ static int snd_vt1724_pro_internal_clock_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
-
+ int hw_rates_count = ice->hw_rates->count;
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
- uinfo->value.enumerated.items = ice->hw_rates->count + 1;
+
+ uinfo->value.enumerated.items = hw_rates_count + ice->ext_clock_count;
+ /* upper limit - keep at top */
if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
uinfo->value.enumerated.item = uinfo->value.enumerated.items - 1;
- if (uinfo->value.enumerated.item == uinfo->value.enumerated.items - 1)
- strcpy(uinfo->value.enumerated.name, "IEC958 Input");
+ if (uinfo->value.enumerated.item >= hw_rates_count)
+ /* ext_clock items */
+ strcpy(uinfo->value.enumerated.name,
+ ice->ext_clock_names[
+ uinfo->value.enumerated.item - hw_rates_count]);
else
+ /* int clock items */
sprintf(uinfo->value.enumerated.name, "%d",
ice->hw_rates->list[uinfo->value.enumerated.item]);
return 0;
@@ -1835,7 +1847,8 @@ static int snd_vt1724_pro_internal_clock_get(struct snd_kcontrol *kcontrol,
spin_lock_irq(&ice->reg_lock);
if (ice->is_spdif_master(ice)) {
- ucontrol->value.enumerated.item[0] = ice->hw_rates->count;
+ ucontrol->value.enumerated.item[0] = ice->hw_rates->count +
+ ice->get_spdif_master_type(ice);
} else {
rate = ice->get_rate(ice);
ucontrol->value.enumerated.item[0] = 0;
@@ -1850,8 +1863,14 @@ static int snd_vt1724_pro_internal_clock_get(struct snd_kcontrol *kcontrol,
return 0;
}
+static int stdclock_get_spdif_master_type(struct snd_ice1712 *ice)
+{
+ /* standard external clock - only single type - SPDIF IN */
+ return 0;
+}
+
/* setting clock to external - SPDIF */
-static void stdclock_set_spdif_clock(struct snd_ice1712 *ice)
+static int stdclock_set_spdif_clock(struct snd_ice1712 *ice, int type)
{
unsigned char oval;
unsigned char i2s_oval;
@@ -1860,27 +1879,30 @@ static void stdclock_set_spdif_clock(struct snd_ice1712 *ice)
/* setting 256fs */
i2s_oval = inb(ICEMT1724(ice, I2S_FORMAT));
outb(i2s_oval & ~VT1724_MT_I2S_MCLK_128X, ICEMT1724(ice, I2S_FORMAT));
+ return 0;
}
+
static int snd_vt1724_pro_internal_clock_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
unsigned int old_rate, new_rate;
unsigned int item = ucontrol->value.enumerated.item[0];
- unsigned int spdif = ice->hw_rates->count;
+ unsigned int first_ext_clock = ice->hw_rates->count;
- if (item > spdif)
+ if (item > first_ext_clock + ice->ext_clock_count - 1)
return -EINVAL;
+ /* if rate = 0 => external clock */
spin_lock_irq(&ice->reg_lock);
if (ice->is_spdif_master(ice))
old_rate = 0;
else
old_rate = ice->get_rate(ice);
- if (item == spdif) {
- /* switching to external clock via SPDIF */
- ice->set_spdif_clock(ice);
+ if (item >= first_ext_clock) {
+ /* switching to external clock */
+ ice->set_spdif_clock(ice, item - first_ext_clock);
new_rate = 0;
} else {
/* internal on-card clock */
@@ -1892,7 +1914,7 @@ static int snd_vt1724_pro_internal_clock_put(struct snd_kcontrol *kcontrol,
}
spin_unlock_irq(&ice->reg_lock);
- /* the first reset to the SPDIF master mode? */
+ /* the first switch to the ext. clock mode? */
if (old_rate != new_rate && !new_rate) {
/* notify akm chips as well */
unsigned int i;
@@ -2550,6 +2572,9 @@ static int __devinit snd_vt1724_probe(struct pci_dev *pci,
return err;
}
+ /* field init before calling chip_init */
+ ice->ext_clock_count = 0;
+
for (tbl = card_tables; *tbl; tbl++) {
for (c = *tbl; c->subvendor; c++) {
if (c->subvendor == ice->eeprom.subvendor) {
@@ -2588,6 +2613,13 @@ __found:
ice->set_mclk = stdclock_set_mclk;
if (!ice->set_spdif_clock)
ice->set_spdif_clock = stdclock_set_spdif_clock;
+ if (!ice->get_spdif_master_type)
+ ice->get_spdif_master_type = stdclock_get_spdif_master_type;
+ if (!ice->ext_clock_names)
+ ice->ext_clock_names = ext_clock_names;
+ if (!ice->ext_clock_count)
+ ice->ext_clock_count = ARRAY_SIZE(ext_clock_names);
+
if (!ice->hw_rates)
set_std_hw_rates(ice);
@@ -2747,7 +2779,7 @@ static int snd_vt1724_resume(struct pci_dev *pci)
if (ice->pm_saved_is_spdif_master) {
/* switching to external clock via SPDIF */
- ice->set_spdif_clock(ice);
+ ice->set_spdif_clock(ice, 0);
} else {
/* internal on-card clock */
snd_vt1724_set_pro_rate(ice, ice->pro_rate_default, 1);
diff --git a/pci/ice1712/juli.c b/pci/ice1712/juli.c
index 4789e8b..4bed963 100644
--- a/pci/ice1712/juli.c
+++ b/pci/ice1712/juli.c
@@ -529,13 +529,14 @@ static inline unsigned char juli_set_mclk(struct snd_ice1712 *ice,
}
/* setting clock to external - SPDIF */
-static void juli_set_spdif_clock(struct snd_ice1712 *ice)
+static int juli_set_spdif_clock(struct snd_ice1712 *ice, int type)
{
unsigned int old;
old = ice->gpio.get_data(ice);
/* external clock (= 0), multiply 1x, 48kHz */
ice->gpio.set_data(ice, (old & ~GPIO_RATE_MASK) | GPIO_MULTI_1X |
GPIO_FREQ_48KHZ);
+ return 0;
}
/* Called when ak4114 detects change in the input SPDIF stream */
--
1.5.6.3
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 7/7] Infrasonic Quartet support
2009-09-16 20:25 ` [PATCH 6/7] Support for multiple external clock types pavel.hofman
@ 2009-09-16 20:25 ` pavel.hofman
0 siblings, 0 replies; 23+ messages in thread
From: pavel.hofman @ 2009-09-16 20:25 UTC (permalink / raw)
To: patch; +Cc: Pavel Hofman, alsa-devel
From: Pavel Hofman <pavel.hofman@ivitera.com>
* three external clock types
* all controls supported
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
diff --git a/pci/ice1712/Makefile b/pci/ice1712/Makefile
index 536eae2..f7ce33f 100644
--- a/pci/ice1712/Makefile
+++ b/pci/ice1712/Makefile
@@ -5,7 +5,7 @@
snd-ice17xx-ak4xxx-objs := ak4xxx.o
snd-ice1712-objs := ice1712.o delta.o hoontech.o ews.o
-snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o maya44.o
+snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o maya44.o quartet.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_ICE1712) += snd-ice1712.o snd-ice17xx-ak4xxx.o
diff --git a/pci/ice1712/ice1724.c b/pci/ice1712/ice1724.c
index 3f11195..3896fb9 100644
--- a/pci/ice1712/ice1724.c
+++ b/pci/ice1712/ice1724.c
@@ -53,6 +53,7 @@
#include "phase.h"
#include "wtm.h"
#include "se.h"
+#include "quartet.h"
MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
MODULE_DESCRIPTION("VIA ICEnsemble ICE1724/1720 (Envy24HT/PT)");
@@ -70,6 +71,7 @@ MODULE_SUPPORTED_DEVICE("{"
PHASE_DEVICE_DESC
WTM_DEVICE_DESC
SE_DEVICE_DESC
+ QTET_DEVICE_DESC
"{VIA,VT1720},"
"{VIA,VT1724},"
"{ICEnsemble,Generic ICE1724},"
@@ -2184,6 +2186,7 @@ static struct snd_ice1712_card_info *card_tables[] __devinitdata = {
snd_vt1724_phase_cards,
snd_vt1724_wtm_cards,
snd_vt1724_se_cards,
+ snd_vt1724_qtet_cards,
NULL,
};
diff --git a/pci/ice1712/quartet.c b/pci/ice1712/quartet.c
new file mode 100644
index 0000000..1948632
--- /dev/null
+++ b/pci/ice1712/quartet.c
@@ -0,0 +1,1130 @@
+/*
+ * ALSA driver for ICEnsemble VT1724 (Envy24HT)
+ *
+ * Lowlevel functions for Infrasonic Quartet
+ *
+ * Copyright (c) 2009 Pavel Hofman <pavel.hofman@ivitera.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+#include <sound/info.h>
+
+#include "ice1712.h"
+#include "envy24ht.h"
+#include <sound/ak4113.h>
+#include "quartet.h"
+
+struct qtet_spec {
+ struct ak4113 *ak4113;
+ unsigned int scr; /* system control register */
+ unsigned int mcr; /* monitoring control register */
+ unsigned int cpld; /* cpld register */
+};
+
+struct qtet_kcontrol_private {
+ unsigned int bit;
+ void (*set_register)(struct snd_ice1712 *ice, unsigned int val);
+ unsigned int (*get_register)(struct snd_ice1712 *ice);
+ unsigned char *texts[2];
+};
+
+enum {
+ IN12_SEL = 0,
+ IN34_SEL,
+ AIN34_SEL,
+ COAX_OUT,
+ IN12_MON12,
+ IN12_MON34,
+ IN34_MON12,
+ IN34_MON34,
+ OUT12_MON34,
+ OUT34_MON12,
+};
+
+static char *ext_clock_names[3] = {"IEC958 In", "Word Clock 1xFS",
+ "Word Clock 256xFS"};
+
+/* chip address on I2C bus */
+#define AK4113_ADDR 0x26 /* S/PDIF receiver */
+
+/* chip address on SPI bus */
+#define AK4620_ADDR 0x02 /* ADC/DAC */
+
+
+/*
+ * GPIO pins
+ */
+
+/* GPIO0 - O - DATA0, def. 0 */
+#define GPIO_D0 (1<<0)
+/* GPIO1 - I/O - DATA1, Jack Detect Input0 (0:present, 1:missing), def. 1 */
+#define GPIO_D1_JACKDTC0 (1<<1)
+/* GPIO2 - I/O - DATA2, Jack Detect Input1 (0:present, 1:missing), def. 1 */
+#define GPIO_D2_JACKDTC1 (1<<2)
+/* GPIO3 - I/O - DATA3, def. 1 */
+#define GPIO_D3 (1<<3)
+/* GPIO4 - I/O - DATA4, SPI CDTO, def. 1 */
+#define GPIO_D4_SPI_CDTO (1<<4)
+/* GPIO5 - I/O - DATA5, SPI CCLK, def. 1 */
+#define GPIO_D5_SPI_CCLK (1<<5)
+/* GPIO6 - I/O - DATA6, Cable Detect Input (0:detected, 1:not detected */
+#define GPIO_D6_CD (1<<6)
+/* GPIO7 - I/O - DATA7, Device Detect Input (0:detected, 1:not detected */
+#define GPIO_D7_DD (1<<7)
+/* GPIO8 - O - CPLD Chip Select, def. 1 */
+#define GPIO_CPLD_CSN (1<<8)
+/* GPIO9 - O - CPLD register read/write (0:write, 1:read), def. 0 */
+#define GPIO_CPLD_RW (1<<9)
+/* GPIO10 - O - SPI Chip Select for CODEC#0, def. 1 */
+#define GPIO_SPI_CSN0 (1<<10)
+/* GPIO11 - O - SPI Chip Select for CODEC#1, def. 1 */
+#define GPIO_SPI_CSN1 (1<<11)
+/* GPIO12 - O - Ex. Register Output Enable (0:enable, 1:disable), def. 1,
+ * init 0 */
+#define GPIO_EX_GPIOE (1<<12)
+/* GPIO13 - O - Ex. Register0 Chip Select for System Control Register,
+ * def. 1 */
+#define GPIO_SCR (1<<13)
+/* GPIO14 - O - Ex. Register1 Chip Select for Monitor Control Register,
+ * def. 1 */
+#define GPIO_MCR (1<<14)
+
+#define GPIO_SPI_ALL (GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK |\
+ GPIO_SPI_CSN0 | GPIO_SPI_CSN1)
+
+#define GPIO_DATA_MASK (GPIO_D0 | GPIO_D1_JACKDTC0 | \
+ GPIO_D2_JACKDTC1 | GPIO_D3 | \
+ GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK | \
+ GPIO_D6_CD | GPIO_D7_DD)
+
+/* System Control Register GPIO_SCR data bits */
+/* Mic/Line select relay (0:line, 1:mic) */
+#define SCR_RELAY GPIO_D0
+/* Phantom power drive control (0:5V, 1:48V) */
+#define SCR_PHP_V GPIO_D1_JACKDTC0
+/* H/W mute control (0:Normal, 1:Mute) */
+#define SCR_MUTE GPIO_D2_JACKDTC1
+/* Phantom power control (0:Phantom on, 1:off) */
+#define SCR_PHP GPIO_D3
+/* Analog input 1/2 Source Select */
+#define SCR_AIN12_SEL0 GPIO_D4_SPI_CDTO
+#define SCR_AIN12_SEL1 GPIO_D5_SPI_CCLK
+/* Analog input 3/4 Source Select (0:line, 1:hi-z) */
+#define SCR_AIN34_SEL GPIO_D6_CD
+/* Codec Power Down (0:power down, 1:normal) */
+#define SCR_CODEC_PDN GPIO_D7_DD
+
+#define SCR_AIN12_LINE (0)
+#define SCR_AIN12_MIC (SCR_AIN12_SEL0)
+#define SCR_AIN12_LOWCUT (SCR_AIN12_SEL1 | SCR_AIN12_SEL0)
+
+/* Monitor Control Register GPIO_MCR data bits */
+/* Input 1/2 to Monitor 1/2 (0:off, 1:on) */
+#define MCR_IN12_MON12 GPIO_D0
+/* Input 1/2 to Monitor 3/4 (0:off, 1:on) */
+#define MCR_IN12_MON34 GPIO_D1_JACKDTC0
+/* Input 3/4 to Monitor 1/2 (0:off, 1:on) */
+#define MCR_IN34_MON12 GPIO_D2_JACKDTC1
+/* Input 3/4 to Monitor 3/4 (0:off, 1:on) */
+#define MCR_IN34_MON34 GPIO_D3
+/* Output to Monitor 1/2 (0:off, 1:on) */
+#define MCR_OUT34_MON12 GPIO_D4_SPI_CDTO
+/* Output to Monitor 3/4 (0:off, 1:on) */
+#define MCR_OUT12_MON34 GPIO_D5_SPI_CCLK
+
+/* CPLD Register DATA bits */
+/* Clock Rate Select */
+#define CPLD_CKS0 GPIO_D0
+#define CPLD_CKS1 GPIO_D1_JACKDTC0
+#define CPLD_CKS2 GPIO_D2_JACKDTC1
+/* Sync Source Select (0:Internal, 1:External) */
+#define CPLD_SYNC_SEL GPIO_D3
+/* Word Clock FS Select (0:FS, 1:256FS) */
+#define CPLD_WORD_SEL GPIO_D4_SPI_CDTO
+/* Coaxial Output Source (IS-Link) (0:SPDIF, 1:I2S) */
+#define CPLD_COAX_OUT GPIO_D5_SPI_CCLK
+/* Input 1/2 Source Select (0:Analog12, 1:An34) */
+#define CPLD_IN12_SEL GPIO_D6_CD
+/* Input 3/4 Source Select (0:Analog34, 1:Digital In) */
+#define CPLD_IN34_SEL GPIO_D7_DD
+
+/* internal clock (CPLD_SYNC_SEL = 0) options */
+#define CPLD_CKS_44100HZ (0)
+#define CPLD_CKS_48000HZ (CPLD_CKS0)
+#define CPLD_CKS_88200HZ (CPLD_CKS1)
+#define CPLD_CKS_96000HZ (CPLD_CKS1 | CPLD_CKS0)
+#define CPLD_CKS_176400HZ (CPLD_CKS2)
+#define CPLD_CKS_192000HZ (CPLD_CKS2 | CPLD_CKS0)
+
+#define CPLD_CKS_MASK (CPLD_CKS0 | CPLD_CKS1 | CPLD_CKS2)
+
+/* external clock (CPLD_SYNC_SEL = 1) options */
+/* external clock - SPDIF */
+#define CPLD_EXT_SPDIF (0 | CPLD_SYNC_SEL)
+/* external clock - WordClock 1xfs */
+#define CPLD_EXT_WORDCLOCK_1FS (CPLD_CKS1 | CPLD_SYNC_SEL)
+/* external clock - WordClock 256xfs */
+#define CPLD_EXT_WORDCLOCK_256FS (CPLD_CKS1 | CPLD_WORD_SEL |\
+ CPLD_SYNC_SEL)
+
+#define EXT_SPDIF_TYPE 0
+#define EXT_WORDCLOCK_1FS_TYPE 1
+#define EXT_WORDCLOCK_256FS_TYPE 2
+
+#define AK4620_DFS0 (1<<0)
+#define AK4620_DFS1 (1<<1)
+#define AK4620_CKS0 (1<<2)
+#define AK4620_CKS1 (1<<3)
+/* Clock and Format Control register */
+#define AK4620_DFS_REG 0x02
+
+/* Deem and Volume Control register */
+#define AK4620_DEEMVOL_REG 0x03
+#define AK4620_SMUTE (1<<7)
+
+/*
+ * Conversion from int value to its binary form. Used for debugging.
+ * The output buffer must be allocated prior to calling the function.
+ */
+static char *get_binary(char *buffer, int value)
+{
+ int i, j, pos;
+ pos = 0;
+ for (i = 0; i < 4; ++i) {
+ for (j = 0; j < 8; ++j) {
+ if (value & (1 << (31-(i*8 + j))))
+ buffer[pos] = '1';
+ else
+ buffer[pos] = '0';
+ pos++;
+ }
+ if (i < 3) {
+ buffer[pos] = ' ';
+ pos++;
+ }
+ }
+ buffer[pos] = '\0';
+ return buffer;
+}
+
+/*
+ * Initial setup of the conversion array GPIO <-> rate
+ */
+static unsigned int qtet_rates[] = {
+ 44100, 48000, 88200,
+ 96000, 176400, 192000,
+};
+
+static unsigned int cks_vals[] = {
+ CPLD_CKS_44100HZ, CPLD_CKS_48000HZ, CPLD_CKS_88200HZ,
+ CPLD_CKS_96000HZ, CPLD_CKS_176400HZ, CPLD_CKS_192000HZ,
+};
+
+static struct snd_pcm_hw_constraint_list qtet_rates_info = {
+ .count = ARRAY_SIZE(qtet_rates),
+ .list = qtet_rates,
+ .mask = 0,
+};
+
+static void qtet_ak4113_write(void *private_data, unsigned char reg,
+ unsigned char val)
+{
+ snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4113_ADDR,
+ reg, val);
+}
+
+static unsigned char qtet_ak4113_read(void *private_data, unsigned char reg)
+{
+ return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data,
+ AK4113_ADDR, reg);
+}
+
+
+/*
+ * AK4620 section
+ */
+
+/*
+ * Write data to addr register of ak4620
+ */
+static void qtet_akm_write(struct snd_akm4xxx *ak, int chip,
+ unsigned char addr, unsigned char data)
+{
+ unsigned int tmp, orig_dir;
+ int idx;
+ unsigned int addrdata;
+ struct snd_ice1712 *ice = ak->private_data[0];
+
+ if (snd_BUG_ON(chip < 0 || chip >= 4))
+ return;
+ /*printk(KERN_DEBUG "Writing to AK4620: chip=%d, addr=0x%x,
+ data=0x%x\n", chip, addr, data);*/
+ orig_dir = ice->gpio.get_dir(ice);
+ ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL);
+ /* set mask - only SPI bits */
+ ice->gpio.set_mask(ice, ~GPIO_SPI_ALL);
+
+ tmp = ice->gpio.get_data(ice);
+ /* high all */
+ tmp |= GPIO_SPI_ALL;
+ ice->gpio.set_data(ice, tmp);
+ udelay(100);
+ /* drop chip select */
+ if (chip)
+ /* CODEC 1 */
+ tmp &= ~GPIO_SPI_CSN1;
+ else
+ tmp &= ~GPIO_SPI_CSN0;
+ ice->gpio.set_data(ice, tmp);
+ udelay(100);
+
+ /* build I2C address + data byte */
+ addrdata = (AK4620_ADDR << 6) | 0x20 | (addr & 0x1f);
+ addrdata = (addrdata << 8) | data;
+ for (idx = 15; idx >= 0; idx--) {
+ /* drop clock */
+ tmp &= ~GPIO_D5_SPI_CCLK;
+ ice->gpio.set_data(ice, tmp);
+ udelay(100);
+ /* set data */
+ if (addrdata & (1 << idx))
+ tmp |= GPIO_D4_SPI_CDTO;
+ else
+ tmp &= ~GPIO_D4_SPI_CDTO;
+ ice->gpio.set_data(ice, tmp);
+ udelay(100);
+ /* raise clock */
+ tmp |= GPIO_D5_SPI_CCLK;
+ ice->gpio.set_data(ice, tmp);
+ udelay(100);
+ }
+ /* all back to 1 */
+ tmp |= GPIO_SPI_ALL;
+ ice->gpio.set_data(ice, tmp);
+ udelay(100);
+
+ /* return all gpios to non-writable */
+ ice->gpio.set_mask(ice, 0xffffff);
+ /* restore GPIOs direction */
+ ice->gpio.set_dir(ice, orig_dir);
+}
+
+static void qtet_akm_set_regs(struct snd_akm4xxx *ak, unsigned char addr,
+ unsigned char mask, unsigned char value)
+{
+ unsigned char tmp;
+ int chip;
+ for (chip = 0; chip < ak->num_chips; chip++) {
+ tmp = snd_akm4xxx_get(ak, chip, addr);
+ /* clear the bits */
+ tmp &= ~mask;
+ /* set the new bits */
+ tmp |= value;
+ snd_akm4xxx_write(ak, chip, addr, tmp);
+ }
+}
+
+/*
+ * change the rate of AK4620
+ */
+static void qtet_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate)
+{
+ unsigned char ak4620_dfs;
+
+ if (rate == 0) /* no hint - S/PDIF input is master or the new spdif
+ input rate undetected, simply return */
+ return;
+
+ /* adjust DFS on codecs - see datasheet */
+ if (rate > 108000)
+ ak4620_dfs = AK4620_DFS1 | AK4620_CKS1;
+ else if (rate > 54000)
+ ak4620_dfs = AK4620_DFS0 | AK4620_CKS0;
+ else
+ ak4620_dfs = 0;
+
+ /* set new value */
+ qtet_akm_set_regs(ak, AK4620_DFS_REG, AK4620_DFS0 | AK4620_DFS1 |
+ AK4620_CKS0 | AK4620_CKS1, ak4620_dfs);
+}
+
+#define AK_CONTROL(xname, xch) { .name = xname, .num_channels = xch }
+
+#define PCM_12_PLAYBACK_VOLUME "PCM 1/2 Playback Volume"
+#define PCM_34_PLAYBACK_VOLUME "PCM 3/4 Playback Volume"
+#define PCM_12_CAPTURE_VOLUME "PCM 1/2 Capture Volume"
+#define PCM_34_CAPTURE_VOLUME "PCM 3/4 Capture Volume"
+
+static const struct snd_akm4xxx_dac_channel qtet_dac[] = {
+ AK_CONTROL(PCM_12_PLAYBACK_VOLUME, 2),
+ AK_CONTROL(PCM_34_PLAYBACK_VOLUME, 2),
+};
+
+static const struct snd_akm4xxx_adc_channel qtet_adc[] = {
+ AK_CONTROL(PCM_12_CAPTURE_VOLUME, 2),
+ AK_CONTROL(PCM_34_CAPTURE_VOLUME, 2),
+};
+
+static struct snd_akm4xxx akm_qtet_dac __devinitdata = {
+ .type = SND_AK4620,
+ .num_dacs = 4, /* DAC1 - Output 12
+ */
+ .num_adcs = 4, /* ADC1 - Input 12
+ */
+ .ops = {
+ .write = qtet_akm_write,
+ .set_rate_val = qtet_akm_set_rate_val,
+ },
+ .dac_info = qtet_dac,
+ .adc_info = qtet_adc,
+};
+
+/* Communication routines with the CPLD */
+
+
+/* Writes data to external register reg, both reg and data are
+ * GPIO representations */
+static void reg_write(struct snd_ice1712 *ice, unsigned int reg,
+ unsigned int data)
+{
+ unsigned int tmp;
+
+ mutex_lock(&ice->gpio_mutex);
+ /* set direction of used GPIOs*/
+ /* all outputs */
+ tmp = 0x00ffff;
+ ice->gpio.set_dir(ice, tmp);
+ /* mask - writable bits */
+ ice->gpio.set_mask(ice, ~(tmp));
+ /* write the data */
+ tmp = ice->gpio.get_data(ice);
+ tmp &= ~GPIO_DATA_MASK;
+ tmp |= data;
+ ice->gpio.set_data(ice, tmp);
+ udelay(100);
+ /* drop output enable */
+ tmp &= ~GPIO_EX_GPIOE;
+ ice->gpio.set_data(ice, tmp);
+ udelay(100);
+ /* drop the register gpio */
+ tmp &= ~reg;
+ ice->gpio.set_data(ice, tmp);
+ udelay(100);
+ /* raise the register GPIO */
+ tmp |= reg;
+ ice->gpio.set_data(ice, tmp);
+ udelay(100);
+
+ /* raise all data gpios */
+ tmp |= GPIO_DATA_MASK;
+ ice->gpio.set_data(ice, tmp);
+ /* mask - immutable bits */
+ ice->gpio.set_mask(ice, 0xffffff);
+ /* outputs only 8-15 */
+ ice->gpio.set_dir(ice, 0x00ff00);
+ mutex_unlock(&ice->gpio_mutex);
+}
+
+static unsigned int get_scr(struct snd_ice1712 *ice)
+{
+ struct qtet_spec *spec = ice->spec;
+ return spec->scr;
+}
+
+static unsigned int get_mcr(struct snd_ice1712 *ice)
+{
+ struct qtet_spec *spec = ice->spec;
+ return spec->mcr;
+}
+
+static unsigned int get_cpld(struct snd_ice1712 *ice)
+{
+ struct qtet_spec *spec = ice->spec;
+ return spec->cpld;
+}
+
+static void set_scr(struct snd_ice1712 *ice, unsigned int val)
+{
+ struct qtet_spec *spec = ice->spec;
+ reg_write(ice, GPIO_SCR, val);
+ spec->scr = val;
+}
+
+static void set_mcr(struct snd_ice1712 *ice, unsigned int val)
+{
+ struct qtet_spec *spec = ice->spec;
+ reg_write(ice, GPIO_MCR, val);
+ spec->mcr = val;
+}
+
+static void set_cpld(struct snd_ice1712 *ice, unsigned int val)
+{
+ struct qtet_spec *spec = ice->spec;
+ reg_write(ice, GPIO_CPLD_CSN, val);
+ spec->cpld = val;
+}
+#ifdef CONFIG_PROC_FS
+static void proc_regs_read(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ struct snd_ice1712 *ice = entry->private_data;
+ char bin_buffer[36];
+
+ snd_iprintf(buffer, "SCR: %s\n", get_binary(bin_buffer,
+ get_scr(ice)));
+ snd_iprintf(buffer, "MCR: %s\n", get_binary(bin_buffer,
+ get_mcr(ice)));
+ snd_iprintf(buffer, "CPLD: %s\n", get_binary(bin_buffer,
+ get_cpld(ice)));
+}
+
+static void proc_init(struct snd_ice1712 *ice)
+{
+ struct snd_info_entry *entry;
+ if (!snd_card_proc_new(ice->card, "quartet", &entry))
+ snd_info_set_text_ops(entry, ice, proc_regs_read);
+}
+#else /* !CONFIG_PROC_FS */
+static void proc_init(struct snd_ice1712 *ice) {}
+#endif
+
+static int qtet_mute_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int val;
+ val = get_scr(ice) & SCR_MUTE;
+ ucontrol->value.integer.value[0] = (val) ? 0 : 1;
+ return 0;
+}
+
+static int qtet_mute_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int old, new, smute;
+ old = get_scr(ice) & SCR_MUTE;
+ if (ucontrol->value.integer.value[0]) {
+ /* unmute */
+ new = 0;
+ /* un-smuting DAC */
+ smute = 0;
+ } else {
+ /* mute */
+ new = SCR_MUTE;
+ /* smuting DAC */
+ smute = AK4620_SMUTE;
+ }
+ if (old != new) {
+ struct snd_akm4xxx *ak = ice->akm;
+ set_scr(ice, (get_scr(ice) & ~SCR_MUTE) | new);
+ /* set smute */
+ qtet_akm_set_regs(ak, AK4620_DEEMVOL_REG, AK4620_SMUTE, smute);
+ return 1;
+ }
+ /* no change */
+ return 0;
+}
+
+static int qtet_ain12_enum_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static char *texts[3] = {"Line In 1/2", "Mic", "Mic + Low-cut"};
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = ARRAY_SIZE(texts);
+
+ if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+ uinfo->value.enumerated.item =
+ uinfo->value.enumerated.items - 1;
+ strcpy(uinfo->value.enumerated.name,
+ texts[uinfo->value.enumerated.item]);
+
+ return 0;
+}
+
+static int qtet_ain12_sw_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int val, result;
+ val = get_scr(ice) & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
+ switch (val) {
+ case SCR_AIN12_LINE:
+ result = 0;
+ break;
+ case SCR_AIN12_MIC:
+ result = 1;
+ break;
+ case SCR_AIN12_LOWCUT:
+ result = 2;
+ break;
+ default:
+ /* BUG - no other combinations allowed */
+ snd_BUG();
+ result = 0;
+ }
+ ucontrol->value.integer.value[0] = result;
+ return 0;
+}
+
+static int qtet_ain12_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int old, new, tmp, masked_old;
+ old = new = get_scr(ice);
+ masked_old = old & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
+ tmp = ucontrol->value.integer.value[0];
+ if (tmp == 2)
+ tmp = 3; /* binary 10 is not supported */
+ tmp <<= 4; /* shifting to SCR_AIN12_SEL0 */
+ if (tmp != masked_old) {
+ /* change requested */
+ switch (tmp) {
+ case SCR_AIN12_LINE:
+ new = old & ~(SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
+ set_scr(ice, new);
+ /* turn off relay */
+ new &= ~SCR_RELAY;
+ set_scr(ice, new);
+ break;
+ case SCR_AIN12_MIC:
+ /* turn on relay */
+ new = old | SCR_RELAY;
+ set_scr(ice, new);
+ new = (new & ~SCR_AIN12_SEL1) | SCR_AIN12_SEL0;
+ set_scr(ice, new);
+ break;
+ case SCR_AIN12_LOWCUT:
+ /* turn on relay */
+ new = old | SCR_RELAY;
+ set_scr(ice, new);
+ new |= SCR_AIN12_SEL1 | SCR_AIN12_SEL0;
+ set_scr(ice, new);
+ break;
+ default:
+ snd_BUG();
+ }
+ return 1;
+ }
+ /* no change */
+ return 0;
+}
+
+static int qtet_php_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int val;
+ /* if phantom voltage =48V, phantom on */
+ val = get_scr(ice) & SCR_PHP_V;
+ ucontrol->value.integer.value[0] = val ? 1 : 0;
+ return 0;
+}
+
+static int qtet_php_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int old, new;
+ old = new = get_scr(ice);
+ if (ucontrol->value.integer.value[0] /* phantom on requested */
+ && (~old & SCR_PHP_V)) /* 0 = voltage 5V */ {
+ /* is off, turn on */
+ /* turn voltage on first, = 1 */
+ new = old | SCR_PHP_V;
+ set_scr(ice, new);
+ /* turn phantom on, = 0 */
+ new &= ~SCR_PHP;
+ set_scr(ice, new);
+ } else if (!ucontrol->value.integer.value[0] && (old & SCR_PHP_V)) {
+ /* phantom off requested and 1 = voltage 48V */
+ /* is on, turn off */
+ /* turn voltage off first, = 0 */
+ new = old & ~SCR_PHP_V;
+ set_scr(ice, new);
+ /* turn phantom off, = 1 */
+ new |= SCR_PHP;
+ set_scr(ice, new);
+ }
+ if (old != new)
+ return 1;
+ /* no change */
+ return 0;
+}
+
+#define PRIV_SW(xid, xbit, xreg) [xid] = {.bit = xbit,\
+ .set_register = set_##xreg,\
+ .get_register = get_##xreg, }
+
+
+#define PRIV_ENUM2(xid, xbit, xreg, xtext1, xtext2) [xid] = {.bit = xbit,\
+ .set_register = set_##xreg,\
+ .get_register = get_##xreg,\
+ .texts = {xtext1, xtext2} }
+
+static struct qtet_kcontrol_private qtet_privates[] = {
+ PRIV_ENUM2(IN12_SEL, CPLD_IN12_SEL, cpld, "An In 1/2", "An In 3/4"),
+ PRIV_ENUM2(IN34_SEL, CPLD_IN34_SEL, cpld, "An In 3/4", "IEC958 In"),
+ PRIV_ENUM2(AIN34_SEL, SCR_AIN34_SEL, scr, "Line In 3/4", "Hi-Z"),
+ PRIV_ENUM2(COAX_OUT, CPLD_COAX_OUT, cpld, "IEC958", "I2S"),
+ PRIV_SW(IN12_MON12, MCR_IN12_MON12, mcr),
+ PRIV_SW(IN12_MON34, MCR_IN12_MON34, mcr),
+ PRIV_SW(IN34_MON12, MCR_IN34_MON12, mcr),
+ PRIV_SW(IN34_MON34, MCR_IN34_MON34, mcr),
+ PRIV_SW(OUT12_MON34, MCR_OUT12_MON34, mcr),
+ PRIV_SW(OUT34_MON12, MCR_OUT34_MON12, mcr),
+};
+
+static int qtet_enum_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct qtet_kcontrol_private private =
+ qtet_privates[kcontrol->private_value];
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = ARRAY_SIZE(private.texts);
+
+ if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+ uinfo->value.enumerated.item =
+ uinfo->value.enumerated.items - 1;
+ strcpy(uinfo->value.enumerated.name,
+ private.texts[uinfo->value.enumerated.item]);
+
+ return 0;
+}
+
+static int qtet_sw_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct qtet_kcontrol_private private =
+ qtet_privates[kcontrol->private_value];
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ ucontrol->value.integer.value[0] =
+ (private.get_register(ice) & private.bit) ? 1 : 0;
+ return 0;
+}
+
+static int qtet_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct qtet_kcontrol_private private =
+ qtet_privates[kcontrol->private_value];
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int old, new;
+ old = private.get_register(ice);
+ if (ucontrol->value.integer.value[0])
+ new = old | private.bit;
+ else
+ new = old & ~private.bit;
+ if (old != new) {
+ private.set_register(ice, new);
+ return 1;
+ }
+ /* no change */
+ return 0;
+}
+
+#define qtet_sw_info snd_ctl_boolean_mono_info
+
+#define QTET_CONTROL(xname, xtype, xpriv) \
+ {.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\
+ .name = xname,\
+ .info = qtet_##xtype##_info,\
+ .get = qtet_sw_get,\
+ .put = qtet_sw_put,\
+ .private_value = xpriv }
+
+static struct snd_kcontrol_new qtet_controls[] __devinitdata = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = qtet_sw_info,
+ .get = qtet_mute_get,
+ .put = qtet_mute_put,
+ .private_value = 0
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Phantom Power",
+ .info = qtet_sw_info,
+ .get = qtet_php_get,
+ .put = qtet_php_put,
+ .private_value = 0
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Analog In 1/2 Capture Switch",
+ .info = qtet_ain12_enum_info,
+ .get = qtet_ain12_sw_get,
+ .put = qtet_ain12_sw_put,
+ .private_value = 0
+ },
+ QTET_CONTROL("Analog In 3/4 Capture Switch", enum, AIN34_SEL),
+ QTET_CONTROL("PCM In 1/2 Capture Switch", enum, IN12_SEL),
+ QTET_CONTROL("PCM In 3/4 Capture Switch", enum, IN34_SEL),
+ QTET_CONTROL("Coax Output Source", enum, COAX_OUT),
+ QTET_CONTROL("Analog In 1/2 to Monitor 1/2", sw, IN12_MON12),
+ QTET_CONTROL("Analog In 1/2 to Monitor 3/4", sw, IN12_MON34),
+ QTET_CONTROL("Analog In 3/4 to Monitor 1/2", sw, IN34_MON12),
+ QTET_CONTROL("Analog In 3/4 to Monitor 3/4", sw, IN34_MON34),
+ QTET_CONTROL("Output 1/2 to Monitor 3/4", sw, OUT12_MON34),
+ QTET_CONTROL("Output 3/4 to Monitor 1/2", sw, OUT34_MON12),
+};
+
+static char *slave_vols[] __devinitdata = {
+ PCM_12_PLAYBACK_VOLUME,
+ PCM_34_PLAYBACK_VOLUME,
+ NULL
+};
+
+static __devinitdata
+DECLARE_TLV_DB_SCALE(qtet_master_db_scale, -6350, 50, 1);
+
+static struct snd_kcontrol __devinit *ctl_find(struct snd_card *card,
+ const char *name)
+{
+ struct snd_ctl_elem_id sid;
+ memset(&sid, 0, sizeof(sid));
+ /* FIXME: strcpy is bad. */
+ strcpy(sid.name, name);
+ sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ return snd_ctl_find_id(card, &sid);
+}
+
+static void __devinit add_slaves(struct snd_card *card,
+ struct snd_kcontrol *master, char **list)
+{
+ for (; *list; list++) {
+ struct snd_kcontrol *slave = ctl_find(card, *list);
+ if (slave)
+ snd_ctl_add_slave(master, slave);
+ }
+}
+
+static int __devinit qtet_add_controls(struct snd_ice1712 *ice)
+{
+ struct qtet_spec *spec = ice->spec;
+ int err, i;
+ struct snd_kcontrol *vmaster;
+ err = snd_ice1712_akm4xxx_build_controls(ice);
+ if (err < 0)
+ return err;
+ for (i = 0; i < ARRAY_SIZE(qtet_controls); i++) {
+ err = snd_ctl_add(ice->card,
+ snd_ctl_new1(&qtet_controls[i], ice));
+ if (err < 0)
+ return err;
+ }
+
+ /* Create virtual master control */
+ vmaster = snd_ctl_make_virtual_master("Master Playback Volume",
+ qtet_master_db_scale);
+ if (!vmaster)
+ return -ENOMEM;
+ add_slaves(ice->card, vmaster, slave_vols);
+ err = snd_ctl_add(ice->card, vmaster);
+ if (err < 0)
+ return err;
+ /* only capture SPDIF over AK4113 */
+ err = snd_ak4113_build(spec->ak4113,
+ ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static inline int qtet_is_spdif_master(struct snd_ice1712 *ice)
+{
+ /* CPLD_SYNC_SEL: 0 = internal, 1 = external (i.e. spdif master) */
+ return (get_cpld(ice) & CPLD_SYNC_SEL) ? 1 : 0;
+}
+
+static unsigned int qtet_get_rate(struct snd_ice1712 *ice)
+{
+ int i;
+ unsigned char result;
+
+ result = get_cpld(ice) & CPLD_CKS_MASK;
+ for (i = 0; i < ARRAY_SIZE(cks_vals); i++)
+ if (cks_vals[i] == result)
+ return qtet_rates[i];
+ return 0;
+}
+
+static int get_cks_val(int rate)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(qtet_rates); i++)
+ if (qtet_rates[i] == rate)
+ return cks_vals[i];
+ return 0;
+}
+
+/* setting new rate */
+static void qtet_set_rate(struct snd_ice1712 *ice, unsigned int rate)
+{
+ unsigned int new;
+ unsigned char val;
+ /* switching ice1724 to external clock - supplied by ext. circuits */
+ val = inb(ICEMT1724(ice, RATE));
+ outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
+
+ new = (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate);
+ /* switch to internal clock, drop CPLD_SYNC_SEL */
+ new &= ~CPLD_SYNC_SEL;
+ /* printk(KERN_DEBUG "QT - set_rate: old %x, new %x\n",
+ get_cpld(ice), new); */
+ set_cpld(ice, new);
+}
+
+static inline unsigned char qtet_set_mclk(struct snd_ice1712 *ice,
+ unsigned int rate)
+{
+ /* no change in master clock */
+ return 0;
+}
+
+/* setting clock to external - SPDIF */
+static int qtet_set_spdif_clock(struct snd_ice1712 *ice, int type)
+{
+ unsigned int old, new;
+
+ old = new = get_cpld(ice);
+ new &= ~(CPLD_CKS_MASK | CPLD_WORD_SEL);
+ switch (type) {
+ case EXT_SPDIF_TYPE:
+ new |= CPLD_EXT_SPDIF;
+ break;
+ case EXT_WORDCLOCK_1FS_TYPE:
+ new |= CPLD_EXT_WORDCLOCK_1FS;
+ break;
+ case EXT_WORDCLOCK_256FS_TYPE:
+ new |= CPLD_EXT_WORDCLOCK_256FS;
+ break;
+ default:
+ snd_BUG();
+ }
+ if (old != new) {
+ set_cpld(ice, new);
+ /* changed */
+ return 1;
+ }
+ return 0;
+}
+
+static int qtet_get_spdif_master_type(struct snd_ice1712 *ice)
+{
+ unsigned int val;
+ int result;
+ val = get_cpld(ice);
+ /* checking only rate/clock-related bits */
+ val &= (CPLD_CKS_MASK | CPLD_WORD_SEL | CPLD_SYNC_SEL);
+ if (!(val & CPLD_SYNC_SEL)) {
+ /* switched to internal clock, is not any external type */
+ result = -1;
+ } else {
+ switch (val) {
+ case (CPLD_EXT_SPDIF):
+ result = EXT_SPDIF_TYPE;
+ break;
+ case (CPLD_EXT_WORDCLOCK_1FS):
+ result = EXT_WORDCLOCK_1FS_TYPE;
+ break;
+ case (CPLD_EXT_WORDCLOCK_256FS):
+ result = EXT_WORDCLOCK_256FS_TYPE;
+ break;
+ default:
+ /* undefined combination of external clock setup */
+ snd_BUG();
+ result = 0;
+ }
+ }
+ return result;
+}
+
+/* Called when ak4113 detects change in the input SPDIF stream */
+static void qtet_ak4113_change(struct ak4113 *ak4113, unsigned char c0,
+ unsigned char c1)
+{
+ struct snd_ice1712 *ice = ak4113->change_callback_private;
+ int rate;
+ if ((qtet_get_spdif_master_type(ice) == EXT_SPDIF_TYPE) &&
+ c1) {
+ /* only for SPDIF master mode, rate was changed */
+ rate = snd_ak4113_external_rate(ak4113);
+ /* printk(KERN_DEBUG "ak4113 - input rate changed to %d\n",
+ rate); */
+ qtet_akm_set_rate_val(ice->akm, rate);
+ }
+}
+
+/*
+ * If clock slaved to SPDIF-IN, setting runtime rate
+ * to the detected external rate
+ */
+static void qtet_spdif_in_open(struct snd_ice1712 *ice,
+ struct snd_pcm_substream *substream)
+{
+ struct qtet_spec *spec = ice->spec;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int rate;
+
+ if (qtet_get_spdif_master_type(ice) != EXT_SPDIF_TYPE)
+ /* not external SPDIF, no rate limitation */
+ return;
+ /* only external SPDIF can detect incoming sample rate */
+ rate = snd_ak4113_external_rate(spec->ak4113);
+ if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) {
+ runtime->hw.rate_min = rate;
+ runtime->hw.rate_max = rate;
+ }
+}
+
+/*
+ * initialize the chip
+ */
+static int __devinit qtet_init(struct snd_ice1712 *ice)
+{
+ static const unsigned char ak4113_init_vals[] = {
+ /* AK4113_REG_PWRDN */ AK4113_RST | AK4113_PWN |
+ AK4113_OCKS0 | AK4113_OCKS1,
+ /* AK4113_REQ_FORMAT */ AK4113_DIF_I24I2S | AK4113_VTX |
+ AK4113_DEM_OFF | AK4113_DEAU,
+ /* AK4113_REG_IO0 */ AK4113_OPS2 | AK4113_TXE |
+ AK4113_XTL_24_576M,
+ /* AK4113_REG_IO1 */ AK4113_EFH_1024LRCLK | AK4113_IPS(0),
+ /* AK4113_REG_INT0_MASK */ 0,
+ /* AK4113_REG_INT1_MASK */ 0,
+ /* AK4113_REG_DATDTS */ 0,
+ };
+ int err;
+ struct qtet_spec *spec;
+ struct snd_akm4xxx *ak;
+ unsigned char val;
+
+ /* switching ice1724 to external clock - supplied by ext. circuits */
+ val = inb(ICEMT1724(ice, RATE));
+ outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (!spec)
+ return -ENOMEM;
+ /* qtet is clocked by Xilinx array */
+ ice->hw_rates = &qtet_rates_info;
+ ice->is_spdif_master = qtet_is_spdif_master;
+ ice->get_rate = qtet_get_rate;
+ ice->set_rate = qtet_set_rate;
+ ice->set_mclk = qtet_set_mclk;
+ ice->set_spdif_clock = qtet_set_spdif_clock;
+ ice->get_spdif_master_type = qtet_get_spdif_master_type;
+ ice->ext_clock_names = ext_clock_names;
+ ice->ext_clock_count = ARRAY_SIZE(ext_clock_names);
+ /* since Qtet can detect correct SPDIF-in rate, all streams can be
+ * limited to this specific rate */
+ ice->spdif.ops.open = ice->pro_open = qtet_spdif_in_open;
+ ice->spec = spec;
+
+ /* Mute Off */
+ /* SCR Initialize*/
+ /* keep codec power down first */
+ set_scr(ice, SCR_PHP);
+ udelay(1);
+ /* codec power up */
+ set_scr(ice, SCR_PHP | SCR_CODEC_PDN);
+
+ /* MCR Initialize */
+ set_mcr(ice, 0);
+
+ /* CPLD Initialize */
+ set_cpld(ice, 0);
+
+
+ ice->num_total_dacs = 2;
+ ice->num_total_adcs = 2;
+
+ ice->akm = kcalloc(2, sizeof(struct snd_akm4xxx), GFP_KERNEL);
+ ak = ice->akm;
+ if (!ak)
+ return -ENOMEM;
+ /* only one codec with two chips */
+ ice->akm_codecs = 1;
+ err = snd_ice1712_akm4xxx_init(ak, &akm_qtet_dac, NULL, ice);
+ if (err < 0)
+ return err;
+ err = snd_ak4113_create(ice->card,
+ qtet_ak4113_read,
+ qtet_ak4113_write,
+ ak4113_init_vals,
+ ice, &spec->ak4113);
+ if (err < 0)
+ return err;
+ /* callback for codecs rate setting */
+ spec->ak4113->change_callback = qtet_ak4113_change;
+ spec->ak4113->change_callback_private = ice;
+ /* AK41143 in Quartet can detect external rate correctly
+ * (i.e. check_flags = 0) */
+ spec->ak4113->check_flags = 0;
+
+ proc_init(ice);
+
+ qtet_set_rate(ice, 44100);
+ return 0;
+}
+
+static unsigned char qtet_eeprom[] __devinitdata = {
+ [ICE_EEP2_SYSCONF] = 0x28, /* clock 256(24MHz), mpu401, 1xADC,
+ 1xDACs, SPDIF in */
+ [ICE_EEP2_ACLINK] = 0x80, /* I2S */
+ [ICE_EEP2_I2S] = 0x78, /* 96k, 24bit, 192k */
+ [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, in, out-ext */
+ [ICE_EEP2_GPIO_DIR] = 0x00, /* 0-7 inputs, switched to output
+ only during output operations */
+ [ICE_EEP2_GPIO_DIR1] = 0xff, /* 8-15 outputs */
+ [ICE_EEP2_GPIO_DIR2] = 0x00,
+ [ICE_EEP2_GPIO_MASK] = 0xff, /* changed only for OUT operations */
+ [ICE_EEP2_GPIO_MASK1] = 0x00,
+ [ICE_EEP2_GPIO_MASK2] = 0xff,
+
+ [ICE_EEP2_GPIO_STATE] = 0x00, /* inputs */
+ [ICE_EEP2_GPIO_STATE1] = 0x7d, /* all 1, but GPIO_CPLD_RW
+ and GPIO15 always zero */
+ [ICE_EEP2_GPIO_STATE2] = 0x00, /* inputs */
+};
+
+/* entry point */
+struct snd_ice1712_card_info snd_vt1724_qtet_cards[] __devinitdata = {
+ {
+ .subvendor = VT1724_SUBDEVICE_QTET,
+ .name = "Infrasonic Quartet",
+ .model = "quartet",
+ .chip_init = qtet_init,
+ .build_controls = qtet_add_controls,
+ .eeprom_size = sizeof(qtet_eeprom),
+ .eeprom_data = qtet_eeprom,
+ },
+ { } /* terminator */
+};
diff --git a/pci/ice1712/quartet.h b/pci/ice1712/quartet.h
new file mode 100644
index 0000000..80809b7
--- /dev/null
+++ b/pci/ice1712/quartet.h
@@ -0,0 +1,10 @@
+#ifndef __SOUND_QTET_H
+#define __SOUND_QTET_H
+
+#define QTET_DEVICE_DESC "{Infrasonic,Quartet},"
+
+#define VT1724_SUBDEVICE_QTET 0x30305349 /* Infrasonic Quartet */
+
+extern struct snd_ice1712_card_info snd_vt1724_qtet_cards[];
+
+#endif /* __SOUND_QTET_H */
--
1.5.6.3
^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-16 20:25 [PATCH 1/7] ak4114 - fix errors in output selector bits pavel.hofman
2009-09-16 20:25 ` [PATCH 2/7] ak4620 support, codec regs listed in proc pavel.hofman
@ 2009-09-21 14:10 ` Takashi Iwai
2009-09-21 18:38 ` Pavel Hofman
1 sibling, 1 reply; 23+ messages in thread
From: Takashi Iwai @ 2009-09-21 14:10 UTC (permalink / raw)
To: pavel.hofman; +Cc: alsa-devel
At Wed, 16 Sep 2009 22:25:35 +0200,
pavel.hofman@ivitera.com wrote:
>
> From: Pavel Hofman <pavel.hofman@ivitera.com>
>
> * the previous version had a typo - values of AK4114_OPS10-12 were
> identical with AK4114_OPS00-02
> * Since no cards actually use this feature, the bug was not identified earlier
>
> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Thanks. Now all patches have been applied to sound git tree.
(And sorry for the delay -- I've been in conferences.)
Takashi
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-21 14:10 ` [PATCH 1/7] ak4114 - fix errors in output selector bits Takashi Iwai
@ 2009-09-21 18:38 ` Pavel Hofman
2009-09-21 19:26 ` Takashi Iwai
0 siblings, 1 reply; 23+ messages in thread
From: Pavel Hofman @ 2009-09-21 18:38 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Takashi Iwai wrote:
> At Wed, 16 Sep 2009 22:25:35 +0200,
> pavel.hofman@ivitera.com wrote:
>> From: Pavel Hofman <pavel.hofman@ivitera.com>
>>
>> * the previous version had a typo - values of AK4114_OPS10-12 were
>> identical with AK4114_OPS00-02
>> * Since no cards actually use this feature, the bug was not identified earlier
>>
>> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
>
> Thanks. Now all patches have been applied to sound git tree.
>
Takashi, thanks a lot.
Do you have any idea when we can expect the changes to propagate to
http://git.alsa-project.org/?p=alsa-kmirror.git;a=summary so that people
can install using description in
http://alsa-project.org/main/index.php/GIT_Server#Occasional_Developers ?
I am planning a few more fixes and compiling the whole kernel seems a
bit of overhead.
Regards,
Pavel.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-21 18:38 ` Pavel Hofman
@ 2009-09-21 19:26 ` Takashi Iwai
2009-09-23 9:16 ` Pavel Hofman
2009-10-01 20:06 ` Compilation procedure from git/tiwai/sound-2.6.git Pavel Hofman
0 siblings, 2 replies; 23+ messages in thread
From: Takashi Iwai @ 2009-09-21 19:26 UTC (permalink / raw)
To: Pavel Hofman; +Cc: alsa-devel
At Mon, 21 Sep 2009 20:38:08 +0200,
Pavel Hofman wrote:
>
> Takashi Iwai wrote:
> > At Wed, 16 Sep 2009 22:25:35 +0200,
> > pavel.hofman@ivitera.com wrote:
> >> From: Pavel Hofman <pavel.hofman@ivitera.com>
> >>
> >> * the previous version had a typo - values of AK4114_OPS10-12 were
> >> identical with AK4114_OPS00-02
> >> * Since no cards actually use this feature, the bug was not identified earlier
> >>
> >> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
> >
> > Thanks. Now all patches have been applied to sound git tree.
> >
>
> Takashi, thanks a lot.
>
> Do you have any idea when we can expect the changes to propagate to
> http://git.alsa-project.org/?p=alsa-kmirror.git;a=summary so that people
> can install using description in
> http://alsa-project.org/main/index.php/GIT_Server#Occasional_Developers ?
Use sound-2.6.git tree on kernel.org together with alsa-driver-build.git
tree:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver-build.git
For casual developers, the snapshot tarball is available at:
ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
Takashi
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-21 19:26 ` Takashi Iwai
@ 2009-09-23 9:16 ` Pavel Hofman
2009-09-23 9:21 ` Takashi Iwai
2009-10-01 20:06 ` Compilation procedure from git/tiwai/sound-2.6.git Pavel Hofman
1 sibling, 1 reply; 23+ messages in thread
From: Pavel Hofman @ 2009-09-23 9:16 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Takashi Iwai wrote:
> At Mon, 21 Sep 2009 20:38:08 +0200,
>>
>> Do you have any idea when we can expect the changes to propagate to
>> http://git.alsa-project.org/?p=alsa-kmirror.git;a=summary so that people
>> can install using description in
>> http://alsa-project.org/main/index.php/GIT_Server#Occasional_Developers ?
>
> Use sound-2.6.git tree on kernel.org together with alsa-driver-build.git
> tree:
> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver-build.git
>
> For casual developers, the snapshot tarball is available at:
> ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
>
>
Hi Takashi,
Thanks a lot for the info. Is this procedure a temporary, alternative,
or new preferred way of compiling alsa drivers from git, as opposed to
http://alsa-project.org/main/index.php/GIT_Server#Occasional_Developers?
Thanks,
Pavel.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-23 9:16 ` Pavel Hofman
@ 2009-09-23 9:21 ` Takashi Iwai
2009-09-23 9:32 ` Pavel Hofman
0 siblings, 1 reply; 23+ messages in thread
From: Takashi Iwai @ 2009-09-23 9:21 UTC (permalink / raw)
To: Pavel Hofman; +Cc: alsa-devel
At Wed, 23 Sep 2009 11:16:01 +0200,
Pavel Hofman wrote:
>
> Takashi Iwai wrote:
> > At Mon, 21 Sep 2009 20:38:08 +0200,
> >>
> >> Do you have any idea when we can expect the changes to propagate to
> >> http://git.alsa-project.org/?p=alsa-kmirror.git;a=summary so that people
> >> can install using description in
> >> http://alsa-project.org/main/index.php/GIT_Server#Occasional_Developers ?
> >
> > Use sound-2.6.git tree on kernel.org together with alsa-driver-build.git
> > tree:
> > git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
> > git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver-build.git
> >
> > For casual developers, the snapshot tarball is available at:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> >
> >
>
> Hi Takashi,
>
> Thanks a lot for the info. Is this procedure a temporary, alternative,
> or new preferred way of compiling alsa drivers from git, as opposed to
> http://alsa-project.org/main/index.php/GIT_Server#Occasional_Developers?
Well, my trees have been over years, and that's where linux-next tree
is based on, so they are no temporary stuff, at least :)
Takashi
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-23 9:21 ` Takashi Iwai
@ 2009-09-23 9:32 ` Pavel Hofman
2009-09-23 9:56 ` Takashi Iwai
0 siblings, 1 reply; 23+ messages in thread
From: Pavel Hofman @ 2009-09-23 9:32 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Takashi Iwai wrote:
> At Wed, 23 Sep 2009 11:16:01 +0200,
> Pavel Hofman wrote:
>> Takashi Iwai wrote:
>>> At Mon, 21 Sep 2009 20:38:08 +0200,
>>>> Do you have any idea when we can expect the changes to propagate to
>>>> http://git.alsa-project.org/?p=alsa-kmirror.git;a=summary so that people
>>>> can install using description in
>>>> http://alsa-project.org/main/index.php/GIT_Server#Occasional_Developers ?
>>> Use sound-2.6.git tree on kernel.org together with alsa-driver-build.git
>>> tree:
>>> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
>>> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver-build.git
>>>
>>> For casual developers, the snapshot tarball is available at:
>>> ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
>>>
>>>
>> Hi Takashi,
>>
>> Thanks a lot for the info. Is this procedure a temporary, alternative,
>> or new preferred way of compiling alsa drivers from git, as opposed to
>> http://alsa-project.org/main/index.php/GIT_Server#Occasional_Developers?
>
> Well, my trees have been over years, and that's where linux-next tree
> is based on, so they are no temporary stuff, at least :)
>
>
> Takashi
Thanks for the info. How do commits from your tree get to
http://git.alsa-project.org/?p=alsa-kmirror.git ?
The point is people ask how they can test new drivers and information on
alsa-project.org for occasional devs talks only about the alsa-project git.
I would update that wiki if I knew the details.
Thanks,
Pavel.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-23 9:32 ` Pavel Hofman
@ 2009-09-23 9:56 ` Takashi Iwai
0 siblings, 0 replies; 23+ messages in thread
From: Takashi Iwai @ 2009-09-23 9:56 UTC (permalink / raw)
To: Pavel Hofman; +Cc: alsa-devel
At Wed, 23 Sep 2009 11:32:45 +0200,
Pavel Hofman wrote:
>
>
>
> Takashi Iwai wrote:
> > At Wed, 23 Sep 2009 11:16:01 +0200,
> > Pavel Hofman wrote:
> >> Takashi Iwai wrote:
> >>> At Mon, 21 Sep 2009 20:38:08 +0200,
> >>>> Do you have any idea when we can expect the changes to propagate to
> >>>> http://git.alsa-project.org/?p=alsa-kmirror.git;a=summary so that people
> >>>> can install using description in
> >>>> http://alsa-project.org/main/index.php/GIT_Server#Occasional_Developers ?
> >>> Use sound-2.6.git tree on kernel.org together with alsa-driver-build.git
> >>> tree:
> >>> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
> >>> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver-build.git
> >>>
> >>> For casual developers, the snapshot tarball is available at:
> >>> ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> >>>
> >>>
> >> Hi Takashi,
> >>
> >> Thanks a lot for the info. Is this procedure a temporary, alternative,
> >> or new preferred way of compiling alsa drivers from git, as opposed to
> >> http://alsa-project.org/main/index.php/GIT_Server#Occasional_Developers?
> >
> > Well, my trees have been over years, and that's where linux-next tree
> > is based on, so they are no temporary stuff, at least :)
> >
> >
> > Takashi
>
> Thanks for the info. How do commits from your tree get to
> http://git.alsa-project.org/?p=alsa-kmirror.git ?
Jaroslav updates it manually.
Takashi
^ permalink raw reply [flat|nested] 23+ messages in thread
* Compilation procedure from git/tiwai/sound-2.6.git
2009-09-21 19:26 ` Takashi Iwai
2009-09-23 9:16 ` Pavel Hofman
@ 2009-10-01 20:06 ` Pavel Hofman
2009-10-02 5:49 ` Takashi Iwai
1 sibling, 1 reply; 23+ messages in thread
From: Pavel Hofman @ 2009-10-01 20:06 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Takashi Iwai wrote:
> At Mon, 21 Sep 2009 20:38:08 +0200,
>
> Use sound-2.6.git tree on kernel.org together with alsa-driver-build.git
> tree:
> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver-build.git
>
Hi Takashi,
I am sorry if I overlooked something but the gitcompile in
alsa-driver-build.git does not work with the sound-2.6.git:
The command is:
pavel@nahore:~/projects/alsa-git/alsa-driver-build$\
ALSAKERNELDIR=/home/pavel/projects/alsa-git/sound-2.6/sound/\
./gitcompile --with-cards="ice1724,usb-audio"
(backslash stands for one line)
gitcompile ends up with:
Hacking autoconf.h...
make[1]: Entering directory
`/home/pavel/projects/alsa-git/alsa-driver-build/include'
make -C sound prepare
make[2]: Entering directory
`/home/pavel/projects/alsa-git/alsa-driver-build/include/sound'
make prepare2
make[3]: Entering directory
`/home/pavel/projects/alsa-git/alsa-driver-build/include/sound'
cp ../../alsa-kernel/include/*.h .
cp: cannot stat `../../alsa-kernel/include/*.h': No such file or directory
make[3]: *** [*.h] Error 1
make[3]: Leaving directory
`/home/pavel/projects/alsa-git/alsa-driver-build/include/sound'
make[2]: *** [prepare] Error 2
make[2]: Leaving directory
`/home/pavel/projects/alsa-git/alsa-driver-build/include/sound'
make[1]: *** [prepare] Error 2
make[1]: Leaving directory
`/home/pavel/projects/alsa-git/alsa-driver-build/include'
make: *** [dep] Error 1
Thanks a lot for a brief description of the compilation procedure.
Best regards,
Pavel Hofman.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Compilation procedure from git/tiwai/sound-2.6.git
2009-10-01 20:06 ` Compilation procedure from git/tiwai/sound-2.6.git Pavel Hofman
@ 2009-10-02 5:49 ` Takashi Iwai
2009-10-02 9:32 ` Pavel Hofman
0 siblings, 1 reply; 23+ messages in thread
From: Takashi Iwai @ 2009-10-02 5:49 UTC (permalink / raw)
To: Pavel Hofman; +Cc: alsa-devel
At Thu, 01 Oct 2009 22:06:56 +0200,
Pavel Hofman wrote:
>
> Takashi Iwai wrote:
> > At Mon, 21 Sep 2009 20:38:08 +0200,
> >
> > Use sound-2.6.git tree on kernel.org together with alsa-driver-build.git
> > tree:
> > git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
> > git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver-build.git
> >
>
> Hi Takashi,
>
> I am sorry if I overlooked something but the gitcompile in
> alsa-driver-build.git does not work with the sound-2.6.git:
First run utils/setup-alsa-kernel with the path to sound-2.6 git
tree. See "Compilation from Linux kernel tree" section in INSTALL
file.
The file structure of alsa-kernel isn't identical with linux kernel.
Takashi
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Compilation procedure from git/tiwai/sound-2.6.git
2009-10-02 5:49 ` Takashi Iwai
@ 2009-10-02 9:32 ` Pavel Hofman
2009-10-06 13:28 ` Takashi Iwai
0 siblings, 1 reply; 23+ messages in thread
From: Pavel Hofman @ 2009-10-02 9:32 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Takashi Iwai wrote:
> At Thu, 01 Oct 2009 22:06:56 +0200,
> Pavel Hofman wrote:
>> Takashi Iwai wrote:
>>> At Mon, 21 Sep 2009 20:38:08 +0200,
>>>
>>> Use sound-2.6.git tree on kernel.org together with alsa-driver-build.git
>>> tree:
>>> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
>>> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver-build.git
>>>
>> Hi Takashi,
>>
>> I am sorry if I overlooked something but the gitcompile in
>> alsa-driver-build.git does not work with the sound-2.6.git:
>
> First run utils/setup-alsa-kernel with the path to sound-2.6 git
> tree. See "Compilation from Linux kernel tree" section in INSTALL
> file.
>
> The file structure of alsa-kernel isn't identical with linux kernel.
>
Hi Takashi,
Thanks a lot, it works fine now. Should I add this information to the
alsa-project wiki?
Please could you commit the following patch? I had to check the script
code to find out the actual meaning.
Thanks,
Pavel.
diff --git a/utils/setup-alsa-kernel b/utils/setup-alsa-kernel
index 47ecfe4..75be3b3 100755
--- a/utils/setup-alsa-kernel
+++ b/utils/setup-alsa-kernel
@@ -22,7 +22,7 @@ if [ -z "$1" ]; then
fi
if [ ! -d acore ]; then
- echo "Run this script on alsa-driver directory"
+ echo "Run this script in alsa-driver directory"
exit 1
fi
^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: Compilation procedure from git/tiwai/sound-2.6.git
2009-10-02 9:32 ` Pavel Hofman
@ 2009-10-06 13:28 ` Takashi Iwai
0 siblings, 0 replies; 23+ messages in thread
From: Takashi Iwai @ 2009-10-06 13:28 UTC (permalink / raw)
To: Pavel Hofman; +Cc: alsa-devel
At Fri, 02 Oct 2009 11:32:13 +0200,
Pavel Hofman wrote:
>
> Takashi Iwai wrote:
> > At Thu, 01 Oct 2009 22:06:56 +0200,
> > Pavel Hofman wrote:
> >> Takashi Iwai wrote:
> >>> At Mon, 21 Sep 2009 20:38:08 +0200,
> >>>
> >>> Use sound-2.6.git tree on kernel.org together with alsa-driver-build.git
> >>> tree:
> >>> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
> >>> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/alsa-driver-build.git
> >>>
> >> Hi Takashi,
> >>
> >> I am sorry if I overlooked something but the gitcompile in
> >> alsa-driver-build.git does not work with the sound-2.6.git:
> >
> > First run utils/setup-alsa-kernel with the path to sound-2.6 git
> > tree. See "Compilation from Linux kernel tree" section in INSTALL
> > file.
> >
> > The file structure of alsa-kernel isn't identical with linux kernel.
> >
>
>
> Hi Takashi,
>
> Thanks a lot, it works fine now. Should I add this information to the
> alsa-project wiki?
Yeah, that'll be helpful.
> Please could you commit the following patch? I had to check the script
> code to find out the actual meaning.
Fixed now.
thanks,
Takashi
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-16 7:45 ` Takashi Iwai
@ 2009-09-16 7:48 ` Pavel Hofman
0 siblings, 0 replies; 23+ messages in thread
From: Pavel Hofman @ 2009-09-16 7:48 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Takashi Iwai wrote:
> At Wed, 16 Sep 2009 09:00:59 +0200,
> Pavel Hofman wrote:
>> Takashi Iwai wrote:
>>> At Wed, 16 Sep 2009 00:39:50 +0200,
>>> pavel.hofman@ivitera.com wrote:
>>>> From: Pavel Hofman <pavel.hofman@ivitera.com>
>>>>
>>>>
>>>> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
>>> Could you describe *what* are exactly fixed?
>>> Do these change influence on any driver behavior?
>> It is just a fix - the original version had a typo - see the equal
>> values for
>> AK4114_OPS12 = AK4114_OPS02
>> AK4114_OPS11 = AK4114_OPS01
>> AK4114_OPS10 = AK4114_OPS00
>>
>> Since no cards actually use this feature, the bug was not uncovered earlier.
>
> OK, then could you write it in the changelog?
OK, in the evening.
Thanks,
Pavel.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-16 7:00 ` Pavel Hofman
@ 2009-09-16 7:45 ` Takashi Iwai
2009-09-16 7:48 ` Pavel Hofman
0 siblings, 1 reply; 23+ messages in thread
From: Takashi Iwai @ 2009-09-16 7:45 UTC (permalink / raw)
To: Pavel Hofman; +Cc: alsa-devel
At Wed, 16 Sep 2009 09:00:59 +0200,
Pavel Hofman wrote:
>
> Takashi Iwai wrote:
> > At Wed, 16 Sep 2009 00:39:50 +0200,
> > pavel.hofman@ivitera.com wrote:
> >> From: Pavel Hofman <pavel.hofman@ivitera.com>
> >>
> >>
> >> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
> >
> > Could you describe *what* are exactly fixed?
> > Do these change influence on any driver behavior?
>
> It is just a fix - the original version had a typo - see the equal
> values for
> AK4114_OPS12 = AK4114_OPS02
> AK4114_OPS11 = AK4114_OPS01
> AK4114_OPS10 = AK4114_OPS00
>
> Since no cards actually use this feature, the bug was not uncovered earlier.
OK, then could you write it in the changelog?
Takashi
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-16 6:03 ` Takashi Iwai
@ 2009-09-16 7:00 ` Pavel Hofman
2009-09-16 7:45 ` Takashi Iwai
0 siblings, 1 reply; 23+ messages in thread
From: Pavel Hofman @ 2009-09-16 7:00 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Takashi Iwai wrote:
> At Wed, 16 Sep 2009 00:39:50 +0200,
> pavel.hofman@ivitera.com wrote:
>> From: Pavel Hofman <pavel.hofman@ivitera.com>
>>
>>
>> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
>
> Could you describe *what* are exactly fixed?
> Do these change influence on any driver behavior?
It is just a fix - the original version had a typo - see the equal
values for
AK4114_OPS12 = AK4114_OPS02
AK4114_OPS11 = AK4114_OPS01
AK4114_OPS10 = AK4114_OPS00
Since no cards actually use this feature, the bug was not uncovered earlier.
Thanks,
Pavel.
>
>
> thanks,
>
> Takashi
>
>> diff --git a/include/ak4114.h b/include/ak4114.h
>> index d293d36..3ce69fd 100644
>> --- a/include/ak4114.h
>> +++ b/include/ak4114.h
>> @@ -95,13 +95,13 @@
>>
>> /* AK4114_REG_IO0 */
>> #define AK4114_TX1E (1<<7) /* TX1 Output Enable (1 = enable) */
>> -#define AK4114_OPS12 (1<<2) /* Output Though Data Selector for TX1 pin */
>> -#define AK4114_OPS11 (1<<1) /* Output Though Data Selector for TX1 pin */
>> -#define AK4114_OPS10 (1<<0) /* Output Though Data Selector for TX1 pin */
>> +#define AK4114_OPS12 (1<<6) /* Output Data Selector for TX1 pin */
>> +#define AK4114_OPS11 (1<<5) /* Output Data Selector for TX1 pin */
>> +#define AK4114_OPS10 (1<<4) /* Output Data Selector for TX1 pin */
>> #define AK4114_TX0E (1<<3) /* TX0 Output Enable (1 = enable) */
>> -#define AK4114_OPS02 (1<<2) /* Output Though Data Selector for TX0 pin */
>> -#define AK4114_OPS01 (1<<1) /* Output Though Data Selector for TX0 pin */
>> -#define AK4114_OPS00 (1<<0) /* Output Though Data Selector for TX0 pin */
>> +#define AK4114_OPS02 (1<<2) /* Output Data Selector for TX0 pin */
>> +#define AK4114_OPS01 (1<<1) /* Output Data Selector for TX0 pin */
>> +#define AK4114_OPS00 (1<<0) /* Output Data Selector for TX0 pin */
>>
>> /* AK4114_REG_IO1 */
>> #define AK4114_EFH1 (1<<7) /* Interrupt 0 pin Hold */
>> --
>> 1.5.6.3
>>
--
IVITERA a.s., www.ivitera.com
Kafkova 16, 160 00 Praha 6
Rubesova 29, 326 00 Plzen
Czech Republic
Mobil +420 603 163 973
Tel. +420 377 449 358
Fax +420 222 745 553
pavel.hofman@ivitera.com
www.educity.cz www.jobcity.cz
www.meetings.cz www.hrzive.cz
www.zamestnaneckevyhody.cz
www.comben.cz
--------------------------------
Navstivte nejvetsi nabidku kurzu a skoleni
na ceskem internetu www.educity.cz,
nejvetsi vyber prostor pro firemni akce www.meetings.cz
a www.jobcity.cz s nabidkami lepsi prace.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/7] ak4114 - fix errors in output selector bits
2009-09-15 22:39 [PATCH 1/7] ak4114 - fix errors in output selector bits pavel.hofman
@ 2009-09-16 6:03 ` Takashi Iwai
2009-09-16 7:00 ` Pavel Hofman
0 siblings, 1 reply; 23+ messages in thread
From: Takashi Iwai @ 2009-09-16 6:03 UTC (permalink / raw)
To: pavel.hofman; +Cc: alsa-devel
At Wed, 16 Sep 2009 00:39:50 +0200,
pavel.hofman@ivitera.com wrote:
>
> From: Pavel Hofman <pavel.hofman@ivitera.com>
>
>
> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Could you describe *what* are exactly fixed?
Do these change influence on any driver behavior?
thanks,
Takashi
> diff --git a/include/ak4114.h b/include/ak4114.h
> index d293d36..3ce69fd 100644
> --- a/include/ak4114.h
> +++ b/include/ak4114.h
> @@ -95,13 +95,13 @@
>
> /* AK4114_REG_IO0 */
> #define AK4114_TX1E (1<<7) /* TX1 Output Enable (1 = enable) */
> -#define AK4114_OPS12 (1<<2) /* Output Though Data Selector for TX1 pin */
> -#define AK4114_OPS11 (1<<1) /* Output Though Data Selector for TX1 pin */
> -#define AK4114_OPS10 (1<<0) /* Output Though Data Selector for TX1 pin */
> +#define AK4114_OPS12 (1<<6) /* Output Data Selector for TX1 pin */
> +#define AK4114_OPS11 (1<<5) /* Output Data Selector for TX1 pin */
> +#define AK4114_OPS10 (1<<4) /* Output Data Selector for TX1 pin */
> #define AK4114_TX0E (1<<3) /* TX0 Output Enable (1 = enable) */
> -#define AK4114_OPS02 (1<<2) /* Output Though Data Selector for TX0 pin */
> -#define AK4114_OPS01 (1<<1) /* Output Though Data Selector for TX0 pin */
> -#define AK4114_OPS00 (1<<0) /* Output Though Data Selector for TX0 pin */
> +#define AK4114_OPS02 (1<<2) /* Output Data Selector for TX0 pin */
> +#define AK4114_OPS01 (1<<1) /* Output Data Selector for TX0 pin */
> +#define AK4114_OPS00 (1<<0) /* Output Data Selector for TX0 pin */
>
> /* AK4114_REG_IO1 */
> #define AK4114_EFH1 (1<<7) /* Interrupt 0 pin Hold */
> --
> 1.5.6.3
>
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 1/7] ak4114 - fix errors in output selector bits
@ 2009-09-15 22:39 pavel.hofman
2009-09-16 6:03 ` Takashi Iwai
0 siblings, 1 reply; 23+ messages in thread
From: pavel.hofman @ 2009-09-15 22:39 UTC (permalink / raw)
To: patch; +Cc: Pavel Hofman, alsa-devel
From: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
diff --git a/include/ak4114.h b/include/ak4114.h
index d293d36..3ce69fd 100644
--- a/include/ak4114.h
+++ b/include/ak4114.h
@@ -95,13 +95,13 @@
/* AK4114_REG_IO0 */
#define AK4114_TX1E (1<<7) /* TX1 Output Enable (1 = enable) */
-#define AK4114_OPS12 (1<<2) /* Output Though Data Selector for TX1 pin */
-#define AK4114_OPS11 (1<<1) /* Output Though Data Selector for TX1 pin */
-#define AK4114_OPS10 (1<<0) /* Output Though Data Selector for TX1 pin */
+#define AK4114_OPS12 (1<<6) /* Output Data Selector for TX1 pin */
+#define AK4114_OPS11 (1<<5) /* Output Data Selector for TX1 pin */
+#define AK4114_OPS10 (1<<4) /* Output Data Selector for TX1 pin */
#define AK4114_TX0E (1<<3) /* TX0 Output Enable (1 = enable) */
-#define AK4114_OPS02 (1<<2) /* Output Though Data Selector for TX0 pin */
-#define AK4114_OPS01 (1<<1) /* Output Though Data Selector for TX0 pin */
-#define AK4114_OPS00 (1<<0) /* Output Though Data Selector for TX0 pin */
+#define AK4114_OPS02 (1<<2) /* Output Data Selector for TX0 pin */
+#define AK4114_OPS01 (1<<1) /* Output Data Selector for TX0 pin */
+#define AK4114_OPS00 (1<<0) /* Output Data Selector for TX0 pin */
/* AK4114_REG_IO1 */
#define AK4114_EFH1 (1<<7) /* Interrupt 0 pin Hold */
--
1.5.6.3
^ permalink raw reply related [flat|nested] 23+ messages in thread
end of thread, other threads:[~2009-10-06 13:28 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-09-16 20:25 [PATCH 1/7] ak4114 - fix errors in output selector bits pavel.hofman
2009-09-16 20:25 ` [PATCH 2/7] ak4620 support, codec regs listed in proc pavel.hofman
2009-09-16 20:25 ` [PATCH 3/7] ak4113 support pavel.hofman
2009-09-16 20:25 ` [PATCH 4/7] ice1724 - adding GPIO routines for mask and direction pavel.hofman
2009-09-16 20:25 ` [PATCH 5/7] ice1724 - pro-rate-locking makes sense only for internal clock mode pavel.hofman
2009-09-16 20:25 ` [PATCH 6/7] Support for multiple external clock types pavel.hofman
2009-09-16 20:25 ` [PATCH 7/7] Infrasonic Quartet support pavel.hofman
2009-09-21 14:10 ` [PATCH 1/7] ak4114 - fix errors in output selector bits Takashi Iwai
2009-09-21 18:38 ` Pavel Hofman
2009-09-21 19:26 ` Takashi Iwai
2009-09-23 9:16 ` Pavel Hofman
2009-09-23 9:21 ` Takashi Iwai
2009-09-23 9:32 ` Pavel Hofman
2009-09-23 9:56 ` Takashi Iwai
2009-10-01 20:06 ` Compilation procedure from git/tiwai/sound-2.6.git Pavel Hofman
2009-10-02 5:49 ` Takashi Iwai
2009-10-02 9:32 ` Pavel Hofman
2009-10-06 13:28 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2009-09-15 22:39 [PATCH 1/7] ak4114 - fix errors in output selector bits pavel.hofman
2009-09-16 6:03 ` Takashi Iwai
2009-09-16 7:00 ` Pavel Hofman
2009-09-16 7:45 ` Takashi Iwai
2009-09-16 7:48 ` Pavel Hofman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.