[PATCH v6 1/1] ALSA: Tascam US-16x08 DSP mixer quirk

* [PATCH v6 1/1] ALSA: Tascam US-16x08 DSP mixer quirk
@ 2017-02-15 14:23 OnkelDead
  2017-02-15 15:46 ` kbuild test robot
  0 siblings, 1 reply; 5+ messages in thread
From: OnkelDead @ 2017-02-15 14:23 UTC (permalink / raw)
  To: tiwai; +Cc: alsa-devel, OnkelDead

Fixed codestyle, removed blank lines among the variable definitions / declarations.
Changed log messages to usb_audio_dbg(), although they happens in therory only.
Changed most control names to standard naming rule (where suitable, I'd miss naming rules
for EQ or compressor features).


Add mixer quirk for Tascam US-16x08 usb interface.
Even that this an usb compliant device,
the input channels and DSP functions (EQ/Compressor)
arn't accessible by default.

Signed-off-by: Detlef Urban <onkel@paraair.de>
---
 sound/usb/Makefile        |    1 +
 sound/usb/mixer_quirks.c  |    5 +
 sound/usb/mixer_us16x08.c | 1435 +++++++++++++++++++++++++++++++++++++++++++++
 sound/usb/mixer_us16x08.h |  122 ++++
 4 files changed, 1563 insertions(+)
 create mode 100644 sound/usb/mixer_us16x08.c
 create mode 100644 sound/usb/mixer_us16x08.h

diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index 2d2d122..42cb33b 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -10,6 +10,7 @@ snd-usb-audio-objs := 	card.o \
 			mixer.o \
 			mixer_quirks.o \
 			mixer_scarlett.o \
+			mixer_us16x08.o \
 			pcm.o \
 			proc.o \
 			quirks.o \
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 04991b0..4fa0053 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -43,6 +43,7 @@
 #include "mixer.h"
 #include "mixer_quirks.h"
 #include "mixer_scarlett.h"
+#include "mixer_us16x08.h"
 #include "helper.h"
 
 extern struct snd_kcontrol_new *snd_usb_feature_unit_ctl;
@@ -1729,6 +1730,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
 		return err;
 
 	switch (mixer->chip->usb_id) {
+	/* Tascam US-16x08 */
+	case USB_ID(0x0644, 0x8047):
+		err = snd_us16x08_controls_create(mixer);
+		break;
 	case USB_ID(0x041e, 0x3020):
 	case USB_ID(0x041e, 0x3040):
 	case USB_ID(0x041e, 0x3042):
diff --git a/sound/usb/mixer_us16x08.c b/sound/usb/mixer_us16x08.c
new file mode 100644
index 0000000..3da0cb5
--- /dev/null
+++ b/sound/usb/mixer_us16x08.c
@@ -0,0 +1,1435 @@
+/*
+ *   Tascam US-16x08 ALSA driver
+ *
+ *   Copyright (c) 2016 by Detlef Urban (onkel@paraair.de)
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/audio-v2.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+
+#include "usbaudio.h"
+#include "mixer.h"
+#include "helper.h"
+
+#include "mixer_us16x08.h"
+
+/* USB control message templates */
+static char route_msg[] = {
+	0x61,
+	0x02,
+	0x03, /* input from master (0x02) or input from computer bus (0x03) */
+	0x62,
+	0x02,
+	0x01, /* input index (0x01/0x02 eq. left/right) or bus (0x01-0x08) */
+	0x41,
+	0x01,
+	0x61,
+	0x02,
+	0x01,
+	0x62,
+	0x02,
+	0x01, /* output index (0x01-0x08) */
+	0x42,
+	0x01,
+	0x43,
+	0x01,
+	0x00,
+	0x00
+};
+
+static char mix_init_msg1[] = {
+	0x71, 0x01, 0x00, 0x00
+};
+
+static char mix_init_msg2[] = {
+	0x62, 0x02, 0x00, 0x61, 0x02, 0x04, 0xb1, 0x01, 0x00, 0x00
+};
+
+static char mix_msg_in[] = {
+	/* default message head, equal to all mixers */
+	0x61, 0x02, 0x04, 0x62, 0x02, 0x01,
+	0x81, /* 0x06: Controller ID */
+	0x02, /* 0x07:  */
+	0x00, /* 0x08: Value of common mixer */
+	0x00,
+	0x00
+};
+
+static char mix_msg_out[] = {
+	/* default message head, equal to all mixers */
+	0x61, 0x02, 0x02, 0x62, 0x02, 0x01,
+	0x81, /* 0x06: Controller ID */
+	0x02, /*                    0x07:  */
+	0x00, /*                    0x08: Value of common mixer */
+	0x00,
+	0x00
+};
+
+static char bypass_msg_out[] = {
+	0x45,
+	0x02,
+	0x01, /* on/off flag */
+	0x00,
+	0x00
+};
+
+static char bus_msg_out[] = {
+	0x44,
+	0x02,
+	0x01, /* on/off flag */
+	0x00,
+	0x00
+};
+
+static char comp_msg[] = {
+	/* default message head, equal to all mixers */
+	0x61, 0x02, 0x04, 0x62, 0x02, 0x01,
+	0x91,
+	0x02,
+	0xf0, /* 0x08: Threshold db (8) (e0 ... 00) (+-0dB -- -32dB) x-32 */
+	0x92,
+	0x02,
+	0x0a, /* 0x0b: Ratio (0a,0b,0d,0f,11,14,19,1e,23,28,32,3c,50,a0,ff)  */
+	0x93,
+	0x02,
+	0x02, /* 0x0e: Attack (0x02 ... 0xc0) (2ms ... 200ms) */
+	0x94,
+	0x02,
+	0x01, /* 0x11: Release (0x01 ... 0x64) (10ms ... 1000ms) x*10  */
+	0x95,
+	0x02,
+	0x03, /* 0x14: gain (0 ... 20) (0dB .. 20dB) */
+	0x96,
+	0x02,
+	0x01,
+	0x97,
+	0x02,
+	0x01, /* 0x1a: main Comp switch (0 ... 1) (off ... on)) */
+	0x00,
+	0x00
+};
+
+static char eqs_msq[] = {
+	/* default message head, equal to all mixers */
+	0x61, 0x02, 0x04, 0x62, 0x02, 0x01,
+	0x51, /*                0x06: Controller ID  */
+	0x02,
+	0x04, /* 0x08: EQ set num (0x01..0x04) (LOW, LOWMID, HIGHMID, HIGH)) */
+	0x52,
+	0x02,
+	0x0c, /* 0x0b: value dB (0 ... 12) (-12db .. +12db)  x-6 */
+	0x53,
+	0x02,
+	0x0f, /* 0x0e: value freq (32-47) (1.7kHz..18kHz) */
+	0x54,
+	0x02,
+	0x02, /* 0x11: band width (0-6) (Q16-Q0.25)  2^x/4 (EQ xxMID only) */
+	0x55,
+	0x02,
+	0x01, /* 0x14: main EQ switch (0 ... 1) (off ... on)) */
+	0x00,
+	0x00
+};
+
+/* compressor ratio map */
+static char ratio_map[] = {
+	0x0a, 0x0b, 0x0d, 0x0f, 0x11, 0x14, 0x19, 0x1e,
+	0x23, 0x28, 0x32, 0x3c, 0x50, 0xa0, 0xff
+};
+
+/* route enumeration names */
+static char *route_names[] = {
+	"Master Left", "Master Right", "Output 1", "Output 2", "Output 3",
+	"Output 4", "Output 5", "Output 6", "Output 7", "Output 8",
+};
+
+static int snd_us16x08_recv_urb(struct snd_usb_audio *chip,
+	unsigned char *buf, int size)
+{
+
+	mutex_lock(&chip->mutex);
+	snd_usb_ctl_msg(chip->dev,
+		usb_rcvctrlpipe(chip->dev, 0),
+		SND_US16X08_URB_METER_REQUEST,
+		SND_US16X08_URB_METER_REQUESTTYPE, 0, 0, buf, size);
+	mutex_unlock(&chip->mutex);
+	return 0;
+}
+
+/* wrapper function to send prepared URB buffer to usb device. Return an error
+ * code if something went wrong
+ */
+static int snd_us16x08_send_urb(struct snd_usb_audio *chip, char *buf, int size)
+{
+	int err = 0;
+
+	if (chip) {
+		err = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0),
+			SND_US16X08_URB_REQUEST, SND_US16X08_URB_REQUESTTYPE,
+			0, 0, buf, size);
+	}
+
+	return err;
+}
+
+static int snd_us16x08_route_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	int i;
+
+	uinfo->count = 1;
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->value.integer.max = SND_US16X08_KCMAX(kcontrol);
+	uinfo->value.integer.min = SND_US16X08_KCMIN(kcontrol);
+	uinfo->value.integer.step = SND_US16X08_KCSTEP(kcontrol);
+	uinfo->value.enumerated.items = 10;
+	uinfo->value.enumerated.names_ptr = (__u64) route_names;
+	uinfo->value.enumerated.names_length = 0;
+	for (i = 0; i < 10; i++)
+		uinfo->value.enumerated.names_length +=
+			strlen(route_names[i]) + 1;
+	return 0;
+}
+
+static int snd_us16x08_route_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	int index = ucontrol->id.index;
+
+	/* route has no bias */
+	ucontrol->value.integer.value[0] = elem->cache_val[index];
+
+	return 0;
+}
+
+static int snd_us16x08_route_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_usb_audio *chip = elem->head.mixer->chip;
+	int index = ucontrol->id.index;
+	char buf[sizeof(route_msg)];
+	int val, val_org, err = 0;
+
+	/* prepare the message buffer from template */
+	memcpy(buf, route_msg, sizeof(route_msg));
+
+	/*  get the new value (no bias for routes) */
+	val = ucontrol->value.integer.value[0];
+	if (val < 2) {
+		/* input comes from a master channel */
+		val_org = val;
+		buf[2] = 0x02;
+	} else {
+		/* input comes from a computer channel */
+		buf[2] = 0x03;
+		val_org = val - 2;
+	}
+
+	/* place new route selection in URB message */
+	buf[5] = (unsigned char) (val_org & 0x0f) + 1;
+	/* place route selector in URB message */
+	buf[13] = index + 1;
+
+	err = snd_us16x08_send_urb(chip, buf, sizeof(route_msg));
+
+	if (err > 0) {
+		elem->cached |= 1 << index;
+		elem->cache_val[index] = val;
+	} else {
+		usb_audio_dbg(chip, "Failed to set routing, err:%d\n", err);
+	}
+
+	return err > 0 ? 1 : 0;
+}
+
+static int snd_us16x08_master_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->count = 1;
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->value.integer.max = SND_US16X08_KCMAX(kcontrol);
+	uinfo->value.integer.min = SND_US16X08_KCMIN(kcontrol);
+	uinfo->value.integer.step = SND_US16X08_KCSTEP(kcontrol);
+	return 0;
+}
+
+static int snd_us16x08_master_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	int index = ucontrol->id.index;
+
+	ucontrol->value.integer.value[0] = elem->cache_val[index];
+
+	return 0;
+}
+
+static int snd_us16x08_master_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_usb_audio *chip = elem->head.mixer->chip;
+	char buf[sizeof(mix_msg_out)];
+	int val, err = 0;
+	int index = ucontrol->id.index;
+
+	/* prepare the message buffer from template */
+	memcpy(buf, mix_msg_out, sizeof(mix_msg_out));
+
+	/* new control value incl. bias*/
+	val = ucontrol->value.integer.value[0];
+
+	buf[8] = val - SND_US16X08_KCBIAS(kcontrol);
+	buf[6] = elem->head.id;
+
+	/* place channel selector in URB message */
+	buf[5] = index + 1;
+	err = snd_us16x08_send_urb(chip, buf, sizeof(mix_msg_out));
+
+	if (err > 0) {
+		elem->cached |= 1 << index;
+		elem->cache_val[index] = val;
+	} else {
+		usb_audio_dbg(chip, "Failed to set master, err:%d\n", err);
+	}
+
+	return err > 0 ? 1 : 0;
+}
+
+static int snd_us16x08_bus_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_usb_audio *chip = elem->head.mixer->chip;
+	char buf[sizeof(mix_msg_out)];
+	int val, err = 0;
+
+	val = ucontrol->value.integer.value[0];
+
+	/* prepare the message buffer from template */
+	switch (elem->head.id) {
+	case SND_US16X08_ID_BYPASS:
+		memcpy(buf, bypass_msg_out, sizeof(bypass_msg_out));
+		buf[2] = val;
+		err = snd_us16x08_send_urb(chip, buf, sizeof(bypass_msg_out));
+		break;
+	case SND_US16X08_ID_BUSS_OUT:
+		memcpy(buf, bus_msg_out, sizeof(bus_msg_out));
+		buf[2] = val;
+		err = snd_us16x08_send_urb(chip, buf, sizeof(bus_msg_out));
+		break;
+	case SND_US16X08_ID_MUTE:
+		memcpy(buf, mix_msg_out, sizeof(mix_msg_out));
+		buf[8] = val;
+		buf[6] = elem->head.id;
+		buf[5] = 1;
+		err = snd_us16x08_send_urb(chip, buf, sizeof(mix_msg_out));
+		break;
+	}
+
+	if (err > 0) {
+		elem->cached |= 1;
+		elem->cache_val[0] = val;
+	} else {
+		usb_audio_dbg(chip, "Failed to set buss param, err:%d\n", err);
+	}
+
+	return err > 0 ? 1 : 0;
+}
+
+static int snd_us16x08_bus_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+
+	switch (elem->head.id) {
+	case SND_US16X08_ID_BUSS_OUT:
+		ucontrol->value.integer.value[0] = elem->cache_val[0];
+		break;
+	case SND_US16X08_ID_BYPASS:
+		ucontrol->value.integer.value[0] = elem->cache_val[0];
+		break;
+	case SND_US16X08_ID_MUTE:
+		ucontrol->value.integer.value[0] = elem->cache_val[0];
+		break;
+	}
+
+	return 0;
+}
+
+/* gets a current mixer value from common store */
+static int snd_us16x08_channel_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	int index = ucontrol->id.index;
+
+	ucontrol->value.integer.value[0] = elem->cache_val[index];
+
+	return 0;
+}
+
+static int snd_us16x08_channel_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_usb_audio *chip = elem->head.mixer->chip;
+	char buf[sizeof(mix_msg_in)];
+	int val, err;
+	int index = ucontrol->id.index;
+
+	/* prepare URB message from template */
+	memcpy(buf, mix_msg_in, sizeof(mix_msg_in));
+
+	val = ucontrol->value.integer.value[0];
+
+	/* add the bias to the new value */
+	buf[8] = val - SND_US16X08_KCBIAS(kcontrol);
+	buf[6] = elem->head.id;
+	buf[5] = index + 1;
+
+	err = snd_us16x08_send_urb(chip, buf, sizeof(mix_msg_in));
+
+	if (err > 0) {
+		elem->cached |= 1 << index;
+		elem->cache_val[index] = val;
+	} else {
+		usb_audio_dbg(chip, "Failed to set channel, err:%d\n", err);
+	}
+
+	return err > 0 ? 1 : 0;
+}
+
+static int snd_us16x08_mix_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->count = 1;
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->value.integer.max = SND_US16X08_KCMAX(kcontrol);
+	uinfo->value.integer.min = SND_US16X08_KCMIN(kcontrol);
+	uinfo->value.integer.step = SND_US16X08_KCSTEP(kcontrol);
+	return 0;
+}
+
+static int snd_us16x08_comp_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_us16x08_comp_store *store =
+		((struct snd_us16x08_comp_store *) elem->private_data);
+	int index = ucontrol->id.index;
+	int val_idx = COMP_STORE_IDX(elem->head.id);
+
+	ucontrol->value.integer.value[0] = store->val[val_idx][index];
+
+	return 0;
+}
+
+static int snd_us16x08_comp_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_usb_audio *chip = elem->head.mixer->chip;
+	struct snd_us16x08_comp_store *store =
+		((struct snd_us16x08_comp_store *) elem->private_data);
+	int index = ucontrol->id.index;
+	char buf[sizeof(comp_msg)];
+	int val_idx, val;
+	int err = 0;
+
+	/* prepare compressor URB message from template  */
+	memcpy(buf, comp_msg, sizeof(comp_msg));
+
+	/* new control value incl. bias*/
+	val_idx = elem->head.id - SND_US16X08_ID_COMP_BASE;
+
+	val = ucontrol->value.integer.value[0];
+	store->val[val_idx][index] = ucontrol->value.integer.value[0];
+
+	/* place comp values in message buffer watch bias! */
+	buf[8] = store->val[
+		COMP_STORE_IDX(SND_US16X08_ID_COMP_THRESHOLD)][index]
+		- SND_US16X08_COMP_THRESHOLD_BIAS;
+	buf[11] = ratio_map[store->val[
+		COMP_STORE_IDX(SND_US16X08_ID_COMP_RATIO)][index]];
+	buf[14] = store->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_ATTACK)][index]
+		+ SND_US16X08_COMP_ATTACK_BIAS;
+	buf[17] = store->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_RELEASE)][index]
+		+ SND_US16X08_COMP_RELEASE_BIAS;
+	buf[20] = store->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_GAIN)][index];
+	buf[26] = store->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_SWITCH)][index];
+
+	/* place channel selector in message buffer */
+	buf[5] = index + 1;
+
+	err = snd_us16x08_send_urb(chip, buf, sizeof(comp_msg));
+
+	if (err > 0) {
+		elem->cached |= 1 << index;
+		elem->cache_val[index] = val;
+	} else {
+		usb_audio_dbg(chip, "Failed to set compressor, err:%d\n", err);
+	}
+
+	return 1;
+}
+
+static int snd_us16x08_eqswitch_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	int val = 0;
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_us16x08_eq_store *store =
+		((struct snd_us16x08_eq_store *) elem->private_data);
+	int index = ucontrol->id.index;
+
+	/* get low switch from cache is enough, cause all bands are together */
+	val = store->val[EQ_STORE_BAND_IDX(elem->head.id)]
+		[EQ_STORE_PARAM_IDX(elem->head.id)][index];
+	ucontrol->value.integer.value[0] = val;
+
+	return 0;
+}
+
+static int snd_us16x08_eqswitch_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_usb_audio *chip = elem->head.mixer->chip;
+	struct snd_us16x08_eq_store *store =
+		((struct snd_us16x08_eq_store *) elem->private_data);
+	int index = ucontrol->id.index;
+
+	char buf[sizeof(eqs_msq)];
+	int val, err = 0;
+	int b_idx;
+
+	/* new control value incl. bias*/
+	val = ucontrol->value.integer.value[0] + SND_US16X08_KCBIAS(kcontrol);
+
+	/* prepare URB message from EQ template */
+	memcpy(buf, eqs_msq, sizeof(eqs_msq));
+
+	/* place channel index in URB message */
+	buf[5] = index + 1;
+	for (b_idx = 0; b_idx < SND_US16X08_ID_EQ_BAND_COUNT; b_idx++) {
+		/* all four EQ bands have to be enabled/disabled in once */
+		buf[20] = val;
+		buf[17] = store->val[b_idx][2][index];
+		buf[14] = store->val[b_idx][1][index];
+		buf[11] = store->val[b_idx][0][index];
+		buf[8] = b_idx + 1;
+		err = snd_us16x08_send_urb(chip, buf, sizeof(eqs_msq));
+		if (err < 0)
+			break;
+		store->val[b_idx][3][index] = val;
+		msleep(15);
+	}
+
+	if (err > 0) {
+		elem->cached |= 1 << index;
+		elem->cache_val[index] = val;
+	} else {
+		usb_audio_dbg(chip, "Failed to set eq switch, err:%d\n", err);
+	}
+
+	return 1;
+}
+
+static int snd_us16x08_eq_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	int val = 0;
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_us16x08_eq_store *store =
+		((struct snd_us16x08_eq_store *) elem->private_data);
+	int index = ucontrol->id.index;
+	int b_idx = EQ_STORE_BAND_IDX(elem->head.id) - 1;
+	int p_idx = EQ_STORE_PARAM_IDX(elem->head.id);
+
+	val = store->val[b_idx][p_idx][index];
+
+	ucontrol->value.integer.value[0] = val;
+
+	return 0;
+}
+
+static int snd_us16x08_eq_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_usb_audio *chip = elem->head.mixer->chip;
+	struct snd_us16x08_eq_store *store =
+		((struct snd_us16x08_eq_store *) elem->private_data);
+	int index = ucontrol->id.index;
+	char buf[sizeof(eqs_msq)];
+	int val, err = 0;
+	int b_idx = EQ_STORE_BAND_IDX(elem->head.id) - 1;
+	int p_idx = EQ_STORE_PARAM_IDX(elem->head.id);
+
+	/* copy URB buffer from EQ template */
+	memcpy(buf, eqs_msq, sizeof(eqs_msq));
+
+	val = ucontrol->value.integer.value[0];
+
+	store->val[b_idx][p_idx][index] = val;
+	buf[20] = store->val[b_idx][3][index];
+	buf[17] = store->val[b_idx][2][index];
+	buf[14] = store->val[b_idx][1][index];
+	buf[11] = store->val[b_idx][0][index];
+
+	/* place channel index in URB buffer */
+	buf[5] = index + 1;
+
+	/* place EQ band in URB buffer */
+	buf[8] = b_idx + 1;
+
+	err = snd_us16x08_send_urb(chip, buf, sizeof(eqs_msq));
+
+	if (err > 0) {
+		/* store new value in EQ band cache */
+		elem->cached |= 1 << index;
+		elem->cache_val[index] = val;
+	} else {
+		usb_audio_dbg(chip, "Failed to set eq param, err:%d\n", err);
+	}
+
+	return 1;
+}
+
+static int snd_us16x08_meter_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->count = 1;
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->value.integer.max = 0x7FFF;
+	uinfo->value.integer.min = 0;
+
+	return 0;
+}
+
+/* calculate compressor index for reduction level request */
+static int snd_get_meter_comp_index(struct snd_us16x08_meter_store *store)
+{
+	int ret;
+
+	/* any channel active */
+	if (store->comp_active_index) {
+		/* check for stereo link */
+		if (store->comp_active_index & 0x20) {
+			/* reset comp_index to left channel*/
+			if (store->comp_index -
+				store->comp_active_index > 1)
+				store->comp_index =
+				store->comp_active_index;
+
+			ret = store->comp_index++ & 0x1F;
+		} else {
+			/* no stereo link */
+			ret = store->comp_active_index;
+		}
+	} else {
+		/* skip channels with no compressor active */
+		while (!store->comp_store->val[
+			COMP_STORE_IDX(SND_US16X08_ID_COMP_SWITCH)]
+			[store->comp_index - 1]
+			&& store->comp_index <= SND_US16X08_MAX_CHANNELS) {
+			store->comp_index++;
+		}
+		ret = store->comp_index++;
+		if (store->comp_index > SND_US16X08_MAX_CHANNELS)
+			store->comp_index = 1;
+	}
+	return ret;
+}
+
+/* retrieve the meter level values from URB message */
+static void get_meter_levels_from_urb(int s,
+	struct snd_us16x08_meter_store *store,
+	u8 *meter_urb)
+{
+	int val = MUC2(meter_urb, s) + (MUC3(meter_urb, s) << 8);
+
+	if (MUA0(meter_urb, s) == 0x61 && MUA1(meter_urb, s) == 0x02 &&
+		MUA2(meter_urb, s) == 0x04 && MUB0(meter_urb, s) == 0x62) {
+		if (MUC0(meter_urb, s) == 0x72)
+			store->meter_level[MUB2(meter_urb, s) - 1] = val;
+		if (MUC0(meter_urb, s) == 0xb2)
+			store->comp_level[MUB2(meter_urb, s) - 1] = val;
+	}
+	if (MUA0(meter_urb, s) == 0x61 && MUA1(meter_urb, s) == 0x02 &&
+		MUA2(meter_urb, s) == 0x02 && MUB0(meter_urb, s) == 0x62)
+		store->master_level[MUB2(meter_urb, s) - 1] = val;
+}
+
+/* Function to retrieve current meter values from the device.
+ *
+ * The device needs to be polled for meter values with an initial
+ * requests. It will return with a sequence of different meter value
+ * packages. The first request (case 0:) initiate this meter response sequence.
+ * After the third response, an additional request can be placed,
+ * to retrieve compressor reduction level value for given channel. This round
+ * trip channel selector will skip all inactive compressors.
+ * A mixer can interrupt this round-trip by selecting one ore two (stereo-link)
+ * specific channels.
+ */
+static int snd_us16x08_meter_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	int i, set;
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_usb_audio *chip = elem->head.mixer->chip;
+	struct snd_us16x08_meter_store *store = elem->private_data;
+	u8 meter_urb[64];
+
+
+	if (elem) {
+		store = (struct snd_us16x08_meter_store *) elem->private_data;
+		chip = elem->head.mixer->chip;
+	} else
+		return 0;
+
+	switch (kcontrol->private_value) {
+	case 0:
+		snd_us16x08_send_urb(chip, mix_init_msg1, 4);
+		snd_us16x08_recv_urb(chip, meter_urb,
+			sizeof(meter_urb));
+		kcontrol->private_value++;
+		break;
+	case 1:
+		snd_us16x08_recv_urb(chip, meter_urb,
+			sizeof(meter_urb));
+		kcontrol->private_value++;
+		break;
+	case 2:
+		snd_us16x08_recv_urb(chip, meter_urb,
+			sizeof(meter_urb));
+		kcontrol->private_value++;
+		break;
+	case 3:
+		mix_init_msg2[2] = snd_get_meter_comp_index(store);
+		snd_us16x08_send_urb(chip, mix_init_msg2, 10);
+		snd_us16x08_recv_urb(chip, meter_urb,
+			sizeof(meter_urb));
+		kcontrol->private_value = 0;
+		break;
+	}
+
+	for (set = 0; set < 6; set++)
+		get_meter_levels_from_urb(set, store, meter_urb);
+
+	for (i = 0; i < SND_US16X08_MAX_CHANNELS; i++) {
+		ucontrol->value.integer.value[i] =
+			store ? store->meter_level[i] : 0;
+	}
+
+	ucontrol->value.integer.value[i++] = store ? store->master_level[0] : 0;
+	ucontrol->value.integer.value[i++] = store ? store->master_level[1] : 0;
+
+	for (i = 2; i < SND_US16X08_MAX_CHANNELS + 2; i++)
+		ucontrol->value.integer.value[i + SND_US16X08_MAX_CHANNELS] =
+		store ? store->comp_level[i - 2] : 0;
+
+	return 1;
+}
+
+static int snd_us16x08_meter_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct usb_mixer_elem_info *elem = kcontrol->private_data;
+	struct snd_us16x08_meter_store *store = elem->private_data;
+	int val;
+
+	val = ucontrol->value.integer.value[0];
+	store->comp_active_index = val;
+	store->comp_index = val;
+
+	return 1;
+}
+
+static struct snd_kcontrol_new snd_us16x08_ch_boolean_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_switch_info,
+	.get = snd_us16x08_channel_get,
+	.put = snd_us16x08_channel_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 1)
+};
+
+static struct snd_kcontrol_new snd_us16x08_ch_int_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_channel_get,
+	.put = snd_us16x08_channel_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_FADER_BIAS, 1, 0, 133)
+};
+
+static struct snd_kcontrol_new snd_us16x08_master_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 1,
+	.info = snd_us16x08_master_info,
+	.get = snd_us16x08_master_get,
+	.put = snd_us16x08_master_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_FADER_BIAS, 1, 0, 133)
+};
+
+static struct snd_kcontrol_new snd_us16x08_route_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 8,
+	.info = snd_us16x08_route_info,
+	.get = snd_us16x08_route_get,
+	.put = snd_us16x08_route_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 9)
+};
+
+static struct snd_kcontrol_new snd_us16x08_bus_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 1,
+	.info = snd_us16x08_switch_info,
+	.get = snd_us16x08_bus_get,
+	.put = snd_us16x08_bus_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 1)
+};
+
+static struct snd_kcontrol_new snd_us16x08_compswitch_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_switch_info,
+	.get = snd_us16x08_comp_get,
+	.put = snd_us16x08_comp_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 1)
+};
+
+static struct snd_kcontrol_new snd_us16x08_comp_threshold_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_comp_get,
+	.put = snd_us16x08_comp_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_COMP_THRESHOLD_BIAS, 1,
+	0, 0x20)
+};
+
+static struct snd_kcontrol_new snd_us16x08_comp_ratio_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_comp_get,
+	.put = snd_us16x08_comp_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0,
+	sizeof(ratio_map) - 1), /*max*/
+};
+
+static struct snd_kcontrol_new snd_us16x08_comp_gain_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_comp_get,
+	.put = snd_us16x08_comp_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 0x14)
+};
+
+static struct snd_kcontrol_new snd_us16x08_comp_attack_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_comp_get,
+	.put = snd_us16x08_comp_put,
+	.private_value =
+	SND_US16X08_KCSET(SND_US16X08_COMP_ATTACK_BIAS, 1, 0, 0xc6),
+};
+
+static struct snd_kcontrol_new snd_us16x08_comp_release_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_comp_get,
+	.put = snd_us16x08_comp_put,
+	.private_value =
+	SND_US16X08_KCSET(SND_US16X08_COMP_RELEASE_BIAS, 1, 0, 0x63),
+};
+
+static struct snd_kcontrol_new snd_us16x08_eq_gain_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_eq_get,
+	.put = snd_us16x08_eq_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 24),
+};
+
+static struct snd_kcontrol_new snd_us16x08_eq_low_freq_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_eq_get,
+	.put = snd_us16x08_eq_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 0x1F),
+};
+
+static struct snd_kcontrol_new snd_us16x08_eq_mid_freq_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_eq_get,
+	.put = snd_us16x08_eq_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 0x3F)
+};
+
+static struct snd_kcontrol_new snd_us16x08_eq_mid_width_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_eq_get,
+	.put = snd_us16x08_eq_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 0x06)
+};
+
+static struct snd_kcontrol_new snd_us16x08_eq_high_freq_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_mix_info,
+	.get = snd_us16x08_eq_get,
+	.put = snd_us16x08_eq_put,
+	.private_value =
+	SND_US16X08_KCSET(SND_US16X08_EQ_HIGHFREQ_BIAS, 1, 0, 0x1F)
+};
+
+static struct snd_kcontrol_new snd_us16x08_eq_switch_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 16,
+	.info = snd_us16x08_switch_info,
+	.get = snd_us16x08_eqswitch_get,
+	.put = snd_us16x08_eqswitch_put,
+	.private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 1)
+};
+
+static struct snd_kcontrol_new snd_us16x08_meter_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.count = 1,
+	.info = snd_us16x08_meter_info,
+	.get = snd_us16x08_meter_get,
+	.put = snd_us16x08_meter_put
+};
+
+/* control store preparation */
+
+/* setup compressor store and assign default value */
+static struct snd_us16x08_comp_store *snd_us16x08_create_comp_store(void)
+{
+	int i = 0;
+	struct snd_us16x08_comp_store *tmp =
+		kmalloc(sizeof(struct snd_us16x08_comp_store), GFP_KERNEL);
+
+	if (tmp == NULL)
+		return NULL;
+
+	for (i = 0; i < SND_US16X08_MAX_CHANNELS; i++) {
+		tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_THRESHOLD)][i]
+			= 0x20;
+		tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_RATIO)][i] = 0x00;
+		tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_GAIN)][i] = 0x00;
+		tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_SWITCH)][i] = 0x00;
+		tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_ATTACK)][i] = 0x00;
+		tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_RELEASE)][i] = 0x00;
+	}
+	return tmp;
+}
+
+/* setup EQ store and assign default values */
+static struct snd_us16x08_eq_store *snd_us16x08_create_eq_store(void)
+{
+	int i, b_idx;
+	struct snd_us16x08_eq_store *tmp =
+		kmalloc(sizeof(struct snd_us16x08_eq_store), GFP_KERNEL);
+
+	if (tmp == NULL)
+		return NULL;
+
+	for (i = 0; i < SND_US16X08_MAX_CHANNELS; i++) {
+		for (b_idx = 0; b_idx < SND_US16X08_ID_EQ_BAND_COUNT; b_idx++) {
+			tmp->val[b_idx][0][i] = 0x0c;
+			tmp->val[b_idx][3][i] = 0x00;
+			switch (b_idx) {
+			case 0: /* EQ Low */
+				tmp->val[b_idx][1][i] = 0x05;
+				tmp->val[b_idx][2][i] = 0xff;
+				break;
+			case 1: /* EQ Mid low */
+				tmp->val[b_idx][1][i] = 0x0e;
+				tmp->val[b_idx][2][i] = 0x02;
+				break;
+			case 2: /* EQ Mid High */
+				tmp->val[b_idx][1][i] = 0x1b;
+				tmp->val[b_idx][2][i] = 0x02;
+				break;
+			case 3: /* EQ High */
+				tmp->val[b_idx][1][i] = 0x2f
+					- SND_US16X08_EQ_HIGHFREQ_BIAS;
+				tmp->val[b_idx][2][i] = 0xff;
+				break;
+			}
+		}
+	}
+	return tmp;
+}
+
+struct snd_us16x08_meter_store *snd_us16x08_create_meter_store(void)
+{
+	struct snd_us16x08_meter_store *tmp =
+		kzalloc(sizeof(struct snd_us16x08_meter_store), GFP_KERNEL);
+
+	if (!tmp)
+		return NULL;
+	tmp->comp_index = 1;
+	tmp->comp_active_index = 0;
+	return tmp;
+
+}
+
+static int add_new_ctl(struct usb_mixer_interface *mixer,
+	const struct snd_kcontrol_new *ncontrol,
+	int index, int val_type, int channels,
+	const char *name, const void *opt,
+	void (*freeer)(struct snd_kcontrol *kctl),
+	struct usb_mixer_elem_info **elem_ret)
+{
+	struct snd_kcontrol *kctl;
+	struct usb_mixer_elem_info *elem;
+	int err;
+
+	usb_audio_dbg(mixer->chip, "us16x08 add mixer %s\n", name);
+
+	elem = kzalloc(sizeof(*elem), GFP_KERNEL);
+	if (!elem)
+		return -ENOMEM;
+
+	elem->head.mixer = mixer;
+	elem->head.resume = NULL;
+	elem->control = 0;
+	elem->idx_off = 0;
+	elem->head.id = index;
+	elem->val_type = val_type;
+	elem->channels = channels;
+	elem->private_data = (void *) opt;
+
+	kctl = snd_ctl_new1(ncontrol, elem);
+	if (!kctl) {
+		kfree(elem);
+		return -ENOMEM;
+	}
+
+	kctl->private_free = freeer;
+
+	strlcpy(kctl->id.name, name, sizeof(kctl->id.name));
+
+	err = snd_usb_mixer_add_control(&elem->head, kctl);
+	if (err < 0)
+		return err;
+
+	if (elem_ret)
+		*elem_ret = elem;
+
+	return 0;
+}
+
+static struct snd_us16x08_control_params control_params;
+
+/* table of EQ controls */
+static struct snd_us16x08_control_params eq_controls[] = {
+	{ /* EQ switch */
+		.kcontrol_new = &snd_us16x08_eq_switch_ctl,
+		.control_id = SND_US16X08_ID_EQENABLE,
+		.type = USB_MIXER_BOOLEAN,
+		.num_channels = 16,
+		.name = "EQ Switch",
+		.freeer = snd_usb_mixer_elem_free
+	},
+	{ /* EQ low gain */
+		.kcontrol_new = &snd_us16x08_eq_gain_ctl,
+		.control_id = SND_US16X08_ID_EQLOWLEVEL,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "EQ Low Volume",
+		.freeer = snd_usb_mixer_elem_free
+	},
+	{ /* EQ low freq */
+		.kcontrol_new = &snd_us16x08_eq_low_freq_ctl,
+		.control_id = SND_US16X08_ID_EQLOWFREQ,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "EQ Low Frequence",
+		.freeer = NULL
+	},
+	{ /* EQ mid low gain */
+		.kcontrol_new = &snd_us16x08_eq_gain_ctl,
+		.control_id = SND_US16X08_ID_EQLOWMIDLEVEL,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "EQ MidLow Volume",
+		.freeer = snd_usb_mixer_elem_free
+	},
+	{ /* EQ mid low freq */
+		.kcontrol_new = &snd_us16x08_eq_mid_freq_ctl,
+		.control_id = SND_US16X08_ID_EQLOWMIDFREQ,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "EQ MidLow Frequence",
+		.freeer = NULL
+	},
+	{ /* EQ mid low Q */
+		.kcontrol_new = &snd_us16x08_eq_mid_width_ctl,
+		.control_id = SND_US16X08_ID_EQLOWMIDWIDTH,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "EQ MidQLow Q",
+		.freeer = NULL
+	},
+	{ /* EQ mid high gain */
+		.kcontrol_new = &snd_us16x08_eq_gain_ctl,
+		.control_id = SND_US16X08_ID_EQHIGHMIDLEVEL,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "EQ MidHigh Volume",
+		.freeer = snd_usb_mixer_elem_free
+	},
+	{ /* EQ mid high freq */
+		.kcontrol_new = &snd_us16x08_eq_mid_freq_ctl,
+		.control_id = SND_US16X08_ID_EQHIGHMIDFREQ,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "EQ MidHigh Frequence",
+		.freeer = NULL
+	},
+	{ /* EQ mid high Q */
+		.kcontrol_new = &snd_us16x08_eq_mid_width_ctl,
+		.control_id = SND_US16X08_ID_EQHIGHMIDWIDTH,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "EQ MidHigh Q",
+		.freeer = NULL
+	},
+	{ /* EQ high gain */
+		.kcontrol_new = &snd_us16x08_eq_gain_ctl,
+		.control_id = SND_US16X08_ID_EQHIGHLEVEL,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "EQ High Volume",
+		.freeer = snd_usb_mixer_elem_free
+	},
+	{ /* EQ low freq */
+		.kcontrol_new = &snd_us16x08_eq_high_freq_ctl,
+		.control_id = SND_US16X08_ID_EQHIGHFREQ,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "EQ High Frequence",
+		.freeer = NULL
+	},
+};
+
+/* table of compressor controls */
+static struct snd_us16x08_control_params comp_controls[] = {
+	{ /* Comp enable */
+		.kcontrol_new = &snd_us16x08_compswitch_ctl,
+		.control_id = SND_US16X08_ID_COMP_SWITCH,
+		.type = USB_MIXER_BOOLEAN,
+		.num_channels = 16,
+		.name = "Compressor Switch",
+		.freeer = snd_usb_mixer_elem_free
+	},
+	{ /* Comp threshold */
+		.kcontrol_new = &snd_us16x08_comp_threshold_ctl,
+		.control_id = SND_US16X08_ID_COMP_THRESHOLD,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "Compressor Threshold Volume",
+		.freeer = NULL
+	},
+	{ /* Comp ratio */
+		.kcontrol_new = &snd_us16x08_comp_ratio_ctl,
+		.control_id = SND_US16X08_ID_COMP_RATIO,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "Compressor Ratio",
+		.freeer = NULL
+	},
+	{ /* Comp attack */
+		.kcontrol_new = &snd_us16x08_comp_attack_ctl,
+		.control_id = SND_US16X08_ID_COMP_ATTACK,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "Compressor Attack",
+		.freeer = NULL
+	},
+	{ /* Comp release */
+		.kcontrol_new = &snd_us16x08_comp_release_ctl,
+		.control_id = SND_US16X08_ID_COMP_RELEASE,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "Compressor Release",
+		.freeer = NULL
+	},
+	{ /* Comp gain */
+		.kcontrol_new = &snd_us16x08_comp_gain_ctl,
+		.control_id = SND_US16X08_ID_COMP_GAIN,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "Compressor Volume",
+		.freeer = NULL
+	},
+};
+
+/* table of channel controls */
+static struct snd_us16x08_control_params channel_controls[] = {
+	{ /* Phase */
+		.kcontrol_new = &snd_us16x08_ch_boolean_ctl,
+		.control_id = SND_US16X08_ID_PHASE,
+		.type = USB_MIXER_BOOLEAN,
+		.num_channels = 16,
+		.name = "Phase Switch",
+		.freeer = snd_usb_mixer_elem_free,
+		.default_val = 0
+	},
+	{ /* Fader */
+		.kcontrol_new = &snd_us16x08_ch_int_ctl,
+		.control_id = SND_US16X08_ID_FADER,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "Line Volume",
+		.freeer = NULL,
+		.default_val = 127
+	},
+	{ /* Mute */
+		.kcontrol_new = &snd_us16x08_ch_boolean_ctl,
+		.control_id = SND_US16X08_ID_MUTE,
+		.type = USB_MIXER_BOOLEAN,
+		.num_channels = 16,
+		.name = "Mute Switch",
+		.freeer = NULL,
+		.default_val = 0
+	},
+	{ /* Pan */
+		.kcontrol_new = &snd_us16x08_ch_int_ctl,
+		.control_id = SND_US16X08_ID_PAN,
+		.type = USB_MIXER_U16,
+		.num_channels = 16,
+		.name = "Pan Left-Right Volume",
+		.freeer = NULL,
+		.default_val = 127
+	},
+};
+
+/* table of master controls */
+static struct snd_us16x08_control_params master_controls[] = {
+	{ /* Master */
+		.kcontrol_new = &snd_us16x08_master_ctl,
+		.control_id = SND_US16X08_ID_FADER,
+		.type = USB_MIXER_U8,
+		.num_channels = 16,
+		.name = "Master Volume",
+		.freeer = NULL,
+		.default_val = 127
+	},
+	{ /* Bypass */
+		.kcontrol_new = &snd_us16x08_bus_ctl,
+		.control_id = SND_US16X08_ID_BYPASS,
+		.type = USB_MIXER_BOOLEAN,
+		.num_channels = 16,
+		.name = "DSP Bypass Switch",
+		.freeer = NULL,
+		.default_val = 0
+	},
+	{ /* Buss out */
+		.kcontrol_new = &snd_us16x08_bus_ctl,
+		.control_id = SND_US16X08_ID_BUSS_OUT,
+		.type = USB_MIXER_BOOLEAN,
+		.num_channels = 16,
+		.name = "Buss Out Switch",
+		.freeer = NULL,
+		.default_val = 0
+	},
+	{ /* Master mute */
+		.kcontrol_new = &snd_us16x08_bus_ctl,
+		.control_id = SND_US16X08_ID_MUTE,
+		.type = USB_MIXER_BOOLEAN,
+		.num_channels = 16,
+		.name = "Master Mute Switch",
+		.freeer = NULL,
+		.default_val = 0
+	},
+
+};
+
+int snd_us16x08_controls_create(struct usb_mixer_interface *mixer)
+{
+	int i, j;
+	int err;
+	struct usb_mixer_elem_info *elem;
+	struct snd_us16x08_comp_store *comp_store;
+	struct snd_us16x08_meter_store *meter_store;
+	struct snd_us16x08_eq_store *eq_store;
+
+	/* just check for non-MIDI interface */
+	if (mixer->hostif->desc.bInterfaceNumber == 3) {
+
+		/* create compressor mixer elements */
+		comp_store = snd_us16x08_create_comp_store();
+		if (comp_store == NULL)
+			return -ENOMEM;
+
+		/* create eq store */
+		eq_store = snd_us16x08_create_eq_store();
+		if (eq_store == NULL) {
+			kfree(comp_store);
+			return -ENOMEM;
+		}
+
+		/* create meters store */
+		meter_store = snd_us16x08_create_meter_store();
+		if (meter_store == NULL) {
+			kfree(comp_store);
+			kfree(eq_store);
+			return -ENOMEM;
+		}
+
+		/* add routing control */
+		err = add_new_ctl(mixer, &snd_us16x08_route_ctl,
+			SND_US16X08_ID_ROUTE, USB_MIXER_U8, 8, "Line Out Route",
+			NULL, NULL, &elem);
+		if (err < 0) {
+			usb_audio_dbg(mixer->chip,
+				"Failed to create route control, err:%d\n",
+				err);
+			return err;
+		}
+		for (i = 0; i < 8; i++)
+			elem->cache_val[i] = i < 2 ? i : i + 2;
+		elem->cached = 0xff;
+
+		/* add master controls */
+		for (i = 0;
+			i < sizeof(master_controls)
+			/ sizeof(control_params);
+			i++) {
+
+			err = add_new_ctl(mixer,
+				master_controls[i].kcontrol_new,
+				master_controls[i].control_id,
+				master_controls[i].type,
+				master_controls[i].num_channels,
+				master_controls[i].name,
+				comp_store,
+				master_controls[i].freeer, &elem);
+			if (err < 0)
+				return err;
+			elem->cache_val[0] = master_controls[i].default_val;
+			elem->cached = 1;
+		}
+
+		/* add channel controls */
+		for (i = 0;
+			i < sizeof(channel_controls)
+			/ sizeof(control_params);
+			i++) {
+
+			err = add_new_ctl(mixer,
+				channel_controls[i].kcontrol_new,
+				channel_controls[i].control_id,
+				channel_controls[i].type,
+				channel_controls[i].num_channels,
+				channel_controls[i].name,
+				comp_store,
+				channel_controls[i].freeer, &elem);
+			if (err < 0)
+				return err;
+			for (j = 0; j < SND_US16X08_MAX_CHANNELS; j++) {
+				elem->cache_val[j] =
+					channel_controls[i].default_val;
+			}
+			elem->cached = 0xffff;
+		}
+
+		/* add EQ controls */
+		for (i = 0; i < sizeof(eq_controls) /
+			sizeof(control_params); i++) {
+
+			err = add_new_ctl(mixer,
+				eq_controls[i].kcontrol_new,
+				eq_controls[i].control_id,
+				eq_controls[i].type,
+				eq_controls[i].num_channels,
+				eq_controls[i].name,
+				eq_store,
+				eq_controls[i].freeer, NULL);
+			if (err < 0)
+				return err;
+		}
+
+		/* add compressor controls */
+		for (i = 0;
+			i < sizeof(comp_controls)
+			/ sizeof(control_params);
+			i++) {
+
+			err = add_new_ctl(mixer,
+				comp_controls[i].kcontrol_new,
+				comp_controls[i].control_id,
+				comp_controls[i].type,
+				comp_controls[i].num_channels,
+				comp_controls[i].name,
+				comp_store,
+				comp_controls[i].freeer, NULL);
+			if (err < 0)
+				return err;
+		}
+
+		/* meter function 'get' must access to compressor store
+		 * so place a reference here
+		 */
+		meter_store->comp_store = comp_store;
+		err = add_new_ctl(mixer, &snd_us16x08_meter_ctl,
+			SND_US16X08_ID_METER, USB_MIXER_U16, 0, "Level Meter",
+			(void *) meter_store, snd_usb_mixer_elem_free, NULL);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
diff --git a/sound/usb/mixer_us16x08.h b/sound/usb/mixer_us16x08.h
new file mode 100644
index 0000000..64f89b5
--- /dev/null
+++ b/sound/usb/mixer_us16x08.h
@@ -0,0 +1,122 @@
+#ifndef __USB_MIXER_US16X08_H
+#define __USB_MIXER_US16X08_H
+
+#define SND_US16X08_MAX_CHANNELS 16
+
+/* define some bias, cause some alsa-mixers wont work with
+ * negative ranges or if mixer-min != 0
+ */
+#define SND_US16X08_NO_BIAS 0
+#define SND_US16X08_FADER_BIAS 127
+#define SND_US16X08_EQ_HIGHFREQ_BIAS 0x20
+#define SND_US16X08_COMP_THRESHOLD_BIAS 0x20
+#define SND_US16X08_COMP_ATTACK_BIAS 2
+#define SND_US16X08_COMP_RELEASE_BIAS 1
+
+/* get macro for components of kcontrol private_value */
+#define SND_US16X08_KCBIAS(x) (((x)->private_value >> 24) & 0xff)
+#define SND_US16X08_KCSTEP(x) (((x)->private_value >> 16) & 0xff)
+#define SND_US16X08_KCMIN(x) (((x)->private_value >> 8) & 0xff)
+#define SND_US16X08_KCMAX(x) (((x)->private_value >> 0) & 0xff)
+/* set macro for kcontrol private_value */
+#define SND_US16X08_KCSET(bias, step, min, max)  \
+	(((bias) << 24) | ((step) << 16) | ((min) << 8) | (max))
+
+/* the URB request/type to control Tascam mixers */
+#define SND_US16X08_URB_REQUEST 0x1D
+#define SND_US16X08_URB_REQUESTTYPE 0x40
+
+/* the URB params to retrieve meter ranges */
+#define SND_US16X08_URB_METER_REQUEST       0x1e
+#define SND_US16X08_URB_METER_REQUESTTYPE   0xc0
+
+#define MUA0(x, y) ((x)[(y) * 10 + 4])
+#define MUA1(x, y) ((x)[(y) * 10 + 5])
+#define MUA2(x, y) ((x)[(y) * 10 + 6])
+#define MUB0(x, y) ((x)[(y) * 10 + 7])
+#define MUB1(x, y) ((x)[(y) * 10 + 8])
+#define MUB2(x, y) ((x)[(y) * 10 + 9])
+#define MUC0(x, y) ((x)[(y) * 10 + 10])
+#define MUC1(x, y) ((x)[(y) * 10 + 11])
+#define MUC2(x, y) ((x)[(y) * 10 + 12])
+#define MUC3(x, y) ((x)[(y) * 10 + 13])
+
+/* Common Channel control IDs */
+#define SND_US16X08_ID_BYPASS 0x45
+#define SND_US16X08_ID_BUSS_OUT 0x44
+#define SND_US16X08_ID_PHASE 0x85
+#define SND_US16X08_ID_MUTE 0x83
+#define SND_US16X08_ID_FADER 0x81
+#define SND_US16X08_ID_PAN 0x82
+#define SND_US16X08_ID_METER 0xB1
+
+#define SND_US16X08_ID_EQ_BAND_COUNT 4
+#define SND_US16X08_ID_EQ_PARAM_COUNT 4
+
+/* EQ level IDs */
+#define SND_US16X08_ID_EQLOWLEVEL 0x01
+#define SND_US16X08_ID_EQLOWMIDLEVEL 0x02
+#define SND_US16X08_ID_EQHIGHMIDLEVEL 0x03
+#define SND_US16X08_ID_EQHIGHLEVEL 0x04
+
+/* EQ frequence IDs */
+#define SND_US16X08_ID_EQLOWFREQ 0x11
+#define SND_US16X08_ID_EQLOWMIDFREQ 0x12
+#define SND_US16X08_ID_EQHIGHMIDFREQ 0x13
+#define SND_US16X08_ID_EQHIGHFREQ 0x14
+
+/* EQ width IDs */
+#define SND_US16X08_ID_EQLOWMIDWIDTH 0x22
+#define SND_US16X08_ID_EQHIGHMIDWIDTH 0x23
+
+#define SND_US16X08_ID_EQENABLE 0x30
+
+#define EQ_STORE_BAND_IDX(x) ((x) & 0xf)
+#define EQ_STORE_PARAM_IDX(x) (((x) & 0xf0) >> 4)
+
+#define SND_US16X08_ID_ROUTE 0x00
+
+/* Compressor Ids */
+#define SND_US16X08_ID_COMP_BASE	0x32
+#define SND_US16X08_ID_COMP_THRESHOLD	SND_US16X08_ID_COMP_BASE
+#define SND_US16X08_ID_COMP_RATIO	(SND_US16X08_ID_COMP_BASE + 1)
+#define SND_US16X08_ID_COMP_ATTACK	(SND_US16X08_ID_COMP_BASE + 2)
+#define SND_US16X08_ID_COMP_RELEASE	(SND_US16X08_ID_COMP_BASE + 3)
+#define SND_US16X08_ID_COMP_GAIN	(SND_US16X08_ID_COMP_BASE + 4)
+#define SND_US16X08_ID_COMP_SWITCH	(SND_US16X08_ID_COMP_BASE + 5)
+#define SND_US16X08_ID_COMP_COUNT	6
+
+#define COMP_STORE_IDX(x) ((x) - SND_US16X08_ID_COMP_BASE)
+
+struct snd_us16x08_eq_store {
+	u8 val[SND_US16X08_ID_EQ_BAND_COUNT][SND_US16X08_ID_EQ_PARAM_COUNT]
+		[SND_US16X08_MAX_CHANNELS];
+};
+
+struct snd_us16x08_comp_store {
+	u8 val[SND_US16X08_ID_COMP_COUNT][SND_US16X08_MAX_CHANNELS];
+};
+
+struct snd_us16x08_meter_store {
+	int meter_level[SND_US16X08_MAX_CHANNELS];
+	int master_level[2]; /* level of meter for master output */
+	int comp_index; /* round trip channel selector */
+	int comp_active_index; /* channel select from user space mixer */
+	int comp_level[16]; /* compressor reduction level */
+	struct snd_us16x08_comp_store *comp_store;
+};
+
+struct snd_us16x08_control_params {
+	struct snd_kcontrol_new *kcontrol_new;
+	int control_id;
+	int type;
+	int num_channels;
+	const char *name;
+	void (*freeer)(struct snd_kcontrol *kctl);
+	int default_val;
+};
+
+#define snd_us16x08_switch_info snd_ctl_boolean_mono_info
+
+int snd_us16x08_controls_create(struct usb_mixer_interface *mixer);
+#endif /* __USB_MIXER_US16X08_H */
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 5+ messages in thread