From: Takashi Iwai <tiwai@suse.de> To: Ezequiel Garcia <elezegarcia@gmail.com> Cc: <linux-kernel@vger.kernel.org>, alsa-devel@alsa-project.org, Jaroslav Kysela <perex@perex.cz>, Clemens Ladisch <clemens@ladisch.de> Subject: Re: [PATCH 1/3] maestro3: Remove unused AC97 register definitions Date: Mon, 18 Jun 2012 16:06:45 +0200 [thread overview] Message-ID: <s5h7gv4n28a.wl%tiwai@suse.de> (raw) In-Reply-To: <1339444731-15678-1-git-send-email-elezegarcia@gmail.com> At Mon, 11 Jun 2012 16:58:49 -0300, Ezequiel Garcia wrote: > > Cc: Jaroslav Kysela <perex@perex.cz> > Cc: Takashi Iwai <tiwai@suse.de> > Cc: Clemens Ladisch <clemens@ladisch.de> > Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Applied this one, but left others for now. thanks, Takashi > --- > sound/pci/maestro3.c | 68 -------------------------------------------------- > 1 files changed, 0 insertions(+), 68 deletions(-) > > diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c > index deef213..adb3b4c 100644 > --- a/sound/pci/maestro3.c > +++ b/sound/pci/maestro3.c > @@ -361,74 +361,6 @@ MODULE_PARM_DESC(amp_gpio, "GPIO pin number for external amp. (default = -1)"); > #define DSP2HOST_REQ_I2SRATE 0x02 > #define DSP2HOST_REQ_TIMER 0x04 > > -/* AC97 registers */ > -/* XXX fix this crap up */ > -/*#define AC97_RESET 0x00*/ > - > -#define AC97_VOL_MUTE_B 0x8000 > -#define AC97_VOL_M 0x1F > -#define AC97_LEFT_VOL_S 8 > - > -#define AC97_MASTER_VOL 0x02 > -#define AC97_LINE_LEVEL_VOL 0x04 > -#define AC97_MASTER_MONO_VOL 0x06 > -#define AC97_PC_BEEP_VOL 0x0A > -#define AC97_PC_BEEP_VOL_M 0x0F > -#define AC97_SROUND_MASTER_VOL 0x38 > -#define AC97_PC_BEEP_VOL_S 1 > - > -/*#define AC97_PHONE_VOL 0x0C > -#define AC97_MIC_VOL 0x0E*/ > -#define AC97_MIC_20DB_ENABLE 0x40 > - > -/*#define AC97_LINEIN_VOL 0x10 > -#define AC97_CD_VOL 0x12 > -#define AC97_VIDEO_VOL 0x14 > -#define AC97_AUX_VOL 0x16*/ > -#define AC97_PCM_OUT_VOL 0x18 > -/*#define AC97_RECORD_SELECT 0x1A*/ > -#define AC97_RECORD_MIC 0x00 > -#define AC97_RECORD_CD 0x01 > -#define AC97_RECORD_VIDEO 0x02 > -#define AC97_RECORD_AUX 0x03 > -#define AC97_RECORD_MONO_MUX 0x02 > -#define AC97_RECORD_DIGITAL 0x03 > -#define AC97_RECORD_LINE 0x04 > -#define AC97_RECORD_STEREO 0x05 > -#define AC97_RECORD_MONO 0x06 > -#define AC97_RECORD_PHONE 0x07 > - > -/*#define AC97_RECORD_GAIN 0x1C*/ > -#define AC97_RECORD_VOL_M 0x0F > - > -/*#define AC97_GENERAL_PURPOSE 0x20*/ > -#define AC97_POWER_DOWN_CTRL 0x26 > -#define AC97_ADC_READY 0x0001 > -#define AC97_DAC_READY 0x0002 > -#define AC97_ANALOG_READY 0x0004 > -#define AC97_VREF_ON 0x0008 > -#define AC97_PR0 0x0100 > -#define AC97_PR1 0x0200 > -#define AC97_PR2 0x0400 > -#define AC97_PR3 0x0800 > -#define AC97_PR4 0x1000 > - > -#define AC97_RESERVED1 0x28 > - > -#define AC97_VENDOR_TEST 0x5A > - > -#define AC97_CLOCK_DELAY 0x5C > -#define AC97_LINEOUT_MUX_SEL 0x0001 > -#define AC97_MONO_MUX_SEL 0x0002 > -#define AC97_CLOCK_DELAY_SEL 0x1F > -#define AC97_DAC_CDS_SHIFT 6 > -#define AC97_ADC_CDS_SHIFT 11 > - > -#define AC97_MULTI_CHANNEL_SEL 0x74 > - > -/*#define AC97_VENDOR_ID1 0x7C > -#define AC97_VENDOR_ID2 0x7E*/ > - > /* > * ASSP control regs > */ > -- > 1.7.4.4 >
WARNING: multiple messages have this Message-ID (diff)
From: Takashi Iwai <tiwai@suse.de> To: Ezequiel Garcia <elezegarcia@gmail.com> Cc: alsa-devel@alsa-project.org, Clemens Ladisch <clemens@ladisch.de>, linux-kernel@vger.kernel.org Subject: Re: [PATCH 1/3] maestro3: Remove unused AC97 register definitions Date: Mon, 18 Jun 2012 16:06:45 +0200 [thread overview] Message-ID: <s5h7gv4n28a.wl%tiwai@suse.de> (raw) In-Reply-To: <1339444731-15678-1-git-send-email-elezegarcia@gmail.com> At Mon, 11 Jun 2012 16:58:49 -0300, Ezequiel Garcia wrote: > > Cc: Jaroslav Kysela <perex@perex.cz> > Cc: Takashi Iwai <tiwai@suse.de> > Cc: Clemens Ladisch <clemens@ladisch.de> > Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Applied this one, but left others for now. thanks, Takashi > --- > sound/pci/maestro3.c | 68 -------------------------------------------------- > 1 files changed, 0 insertions(+), 68 deletions(-) > > diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c > index deef213..adb3b4c 100644 > --- a/sound/pci/maestro3.c > +++ b/sound/pci/maestro3.c > @@ -361,74 +361,6 @@ MODULE_PARM_DESC(amp_gpio, "GPIO pin number for external amp. (default = -1)"); > #define DSP2HOST_REQ_I2SRATE 0x02 > #define DSP2HOST_REQ_TIMER 0x04 > > -/* AC97 registers */ > -/* XXX fix this crap up */ > -/*#define AC97_RESET 0x00*/ > - > -#define AC97_VOL_MUTE_B 0x8000 > -#define AC97_VOL_M 0x1F > -#define AC97_LEFT_VOL_S 8 > - > -#define AC97_MASTER_VOL 0x02 > -#define AC97_LINE_LEVEL_VOL 0x04 > -#define AC97_MASTER_MONO_VOL 0x06 > -#define AC97_PC_BEEP_VOL 0x0A > -#define AC97_PC_BEEP_VOL_M 0x0F > -#define AC97_SROUND_MASTER_VOL 0x38 > -#define AC97_PC_BEEP_VOL_S 1 > - > -/*#define AC97_PHONE_VOL 0x0C > -#define AC97_MIC_VOL 0x0E*/ > -#define AC97_MIC_20DB_ENABLE 0x40 > - > -/*#define AC97_LINEIN_VOL 0x10 > -#define AC97_CD_VOL 0x12 > -#define AC97_VIDEO_VOL 0x14 > -#define AC97_AUX_VOL 0x16*/ > -#define AC97_PCM_OUT_VOL 0x18 > -/*#define AC97_RECORD_SELECT 0x1A*/ > -#define AC97_RECORD_MIC 0x00 > -#define AC97_RECORD_CD 0x01 > -#define AC97_RECORD_VIDEO 0x02 > -#define AC97_RECORD_AUX 0x03 > -#define AC97_RECORD_MONO_MUX 0x02 > -#define AC97_RECORD_DIGITAL 0x03 > -#define AC97_RECORD_LINE 0x04 > -#define AC97_RECORD_STEREO 0x05 > -#define AC97_RECORD_MONO 0x06 > -#define AC97_RECORD_PHONE 0x07 > - > -/*#define AC97_RECORD_GAIN 0x1C*/ > -#define AC97_RECORD_VOL_M 0x0F > - > -/*#define AC97_GENERAL_PURPOSE 0x20*/ > -#define AC97_POWER_DOWN_CTRL 0x26 > -#define AC97_ADC_READY 0x0001 > -#define AC97_DAC_READY 0x0002 > -#define AC97_ANALOG_READY 0x0004 > -#define AC97_VREF_ON 0x0008 > -#define AC97_PR0 0x0100 > -#define AC97_PR1 0x0200 > -#define AC97_PR2 0x0400 > -#define AC97_PR3 0x0800 > -#define AC97_PR4 0x1000 > - > -#define AC97_RESERVED1 0x28 > - > -#define AC97_VENDOR_TEST 0x5A > - > -#define AC97_CLOCK_DELAY 0x5C > -#define AC97_LINEOUT_MUX_SEL 0x0001 > -#define AC97_MONO_MUX_SEL 0x0002 > -#define AC97_CLOCK_DELAY_SEL 0x1F > -#define AC97_DAC_CDS_SHIFT 6 > -#define AC97_ADC_CDS_SHIFT 11 > - > -#define AC97_MULTI_CHANNEL_SEL 0x74 > - > -/*#define AC97_VENDOR_ID1 0x7C > -#define AC97_VENDOR_ID2 0x7E*/ > - > /* > * ASSP control regs > */ > -- > 1.7.4.4 >
next prev parent reply other threads:[~2012-06-18 14:06 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-06-11 19:58 [PATCH 1/3] maestro3: Remove unused AC97 register definitions Ezequiel Garcia 2012-06-11 19:58 ` Ezequiel Garcia 2012-06-11 19:58 ` [PATCH 2/3] swarm_cs4297: Rename AC97 registers to use sound/ac97_codec.h definitions Ezequiel Garcia 2012-06-11 19:58 ` Ezequiel Garcia 2012-06-18 14:04 ` Takashi Iwai 2012-06-18 14:04 ` Takashi Iwai 2012-06-18 17:50 ` Ezequiel Garcia 2012-06-19 5:38 ` Takashi Iwai 2012-06-19 5:38 ` Takashi Iwai 2012-06-19 12:41 ` Ezequiel Garcia 2012-06-19 12:41 ` Ezequiel Garcia 2012-06-19 12:47 ` Takashi Iwai 2012-06-19 19:13 ` Ezequiel Garcia 2012-07-07 23:06 ` Maciej W. Rozycki 2012-06-11 19:58 ` [PATCH 3/3] Remove unused include/linux/ac97_codec.h header Ezequiel Garcia 2012-06-11 19:58 ` Ezequiel Garcia 2012-06-18 14:06 ` Takashi Iwai [this message] 2012-06-18 14:06 ` [PATCH 1/3] maestro3: Remove unused AC97 register definitions Takashi Iwai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=s5h7gv4n28a.wl%tiwai@suse.de \ --to=tiwai@suse.de \ --cc=alsa-devel@alsa-project.org \ --cc=clemens@ladisch.de \ --cc=elezegarcia@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.