All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: alsa-devel@alsa-project.org, Liam Girdwood <lrg@ti.com>
Subject: Re: ASoC updates for 3.1
Date: Mon, 18 Jul 2011 13:12:51 +0200	[thread overview]
Message-ID: <s5hhb6jkfkc.wl%tiwai@suse.de> (raw)
In-Reply-To: <20110718104340.GB7775@opensource.wolfsonmicro.com>

At Mon, 18 Jul 2011 19:43:41 +0900,
Mark Brown wrote:
> 
> The following changes since commit e320bc42be746b8f006d163b6e340e5fb79ce7b2:
> 
>   Merge branch 'for-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc (2011-07-09 11:43:04 +0200)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-3.1

Pulled now.  Thanks.


Takashi


> Axel Lin (1):
>       ASoC: wm8900: fix a memory leak if wm8900_set_fll fails
> 
> Dimitris Papastamos (1):
>       ASoC: WM8983: Initial driver
> 
> Giridhar Maruthy (1):
>       ASoC: SAMSUNG: 24-bit audio playback on Exynos4210
> 
> Jarkko Nikula (2):
>       ASoC: tlv320aic3x: Don't sync first two registers from register cache
>       ASoC: tlv320aic3x: Do soft reset to codec when going to bias off state
> 
> Johannes Stezenbach (2):
>       ASoC: STA32x: Add mixer controls for biquad coefficients
>       ASoC: STA32x: Preserve reserved register bits
> 
> Kuninori Morimoto (3):
>       ASoC: sh: fsi-ak4642: fixup snd_soc_card name
>       ASoC: sh: fsi-da7210: fixup snd_soc_card name
>       ASoC: sh: fsi-hdmi: fixup snd_soc_card name
> 
> Mark Brown (19):
>       Merge branch 'for-3.0' into for-3.1
>       Merge branch 'for-3.0' into for-3.1
>       Merge branch 'topic/asoc' of git://git.kernel.org/.../tiwai/sound-2.6 into for-3.1
>       ASoC: Conditionalize the enable of WM8994 ADC TDM mode
>       ASoC: Use late enable handling for direct voice, speaker and headphone
>       ASoC: Implement DC servo completion IRQ handling for wm_hubs devices
>       ASoC: Hook up DC servo completion IRQ for WM8994 and WM8958
>       ASoC: Use WM8994 FLL lock interrupt
>       ASoC: Don't warn on low WM8994/58 AIFnCLKs
>       ASoC: Log WM8994 FIFO errors from the interrupt
>       ASoC: Fix shift in WM8958 accessory detection default implementation
>       Merge branch 'for-3.0' into for-3.1
>       ASoC: Handle spurious wm_hubs DC servo done interrupts
>       ASoC: Handle failed WM8994 FLL lock waits
>       ASoC: Report an error for unknown adav80x formats
>       ASoC: Reduce power consumption for idle DAIs in WM8994
>       ASoC: Don't use -1 to boostrap subseq so it can be used by drivers
>       ASoC: Correct WM8994 MICBIAS supply widget hookup
>       Merge branch 'for-3.0' into for-3.1
> 
> Michael Williamson (1):
>       audio: tlv320aic26: fix PLL register configuration
> 
> Takashi Iwai (4):
>       Merge branch 'for-3.0' of git://git.kernel.org/.../lrg/asoc-2.6 into fix/asoc
>       Merge branch 'for-3.0' of git://git.kernel.org/.../broonie/sound-2.6 into fix/asoc
>       ASoC: Don't set invalid name string to snd_card->driver field
>       Merge branch 'for-3.0' of git://git.kernel.org/.../broonie/sound-2.6 into fix/asoc
> 
>  sound/soc/codecs/Kconfig        |    4 +
>  sound/soc/codecs/Makefile       |    2 +
>  sound/soc/codecs/adav80x.c      |    4 +-
>  sound/soc/codecs/sta32x.c       |  140 +++++
>  sound/soc/codecs/tlv320aic26.c  |   14 +-
>  sound/soc/codecs/tlv320aic3x.c  |    9 +-
>  sound/soc/codecs/wm8900.c       |    1 +
>  sound/soc/codecs/wm8983.c       | 1203 +++++++++++++++++++++++++++++++++++++++
>  sound/soc/codecs/wm8983.h       | 1029 +++++++++++++++++++++++++++++++++
>  sound/soc/codecs/wm8993.c       |    2 +-
>  sound/soc/codecs/wm8994.c       |  156 +++++-
>  sound/soc/codecs/wm8994.h       |    3 +
>  sound/soc/codecs/wm_hubs.c      |   33 +-
>  sound/soc/codecs/wm_hubs.h      |    8 +
>  sound/soc/samsung/smdk_wm8994.c |    5 +-
>  sound/soc/sh/fsi-ak4642.c       |   16 +-
>  sound/soc/sh/fsi-da7210.c       |    2 +-
>  sound/soc/sh/fsi-hdmi.c         |    4 +-
>  sound/soc/soc-core.c            |    5 +-
>  sound/soc/soc-dapm.c            |    2 +-
>  20 files changed, 2593 insertions(+), 49 deletions(-)
>  create mode 100644 sound/soc/codecs/wm8983.c
>  create mode 100644 sound/soc/codecs/wm8983.h
> 

  reply	other threads:[~2011-07-18 11:12 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-18 10:43 ASoC updates for 3.1 Mark Brown
2011-07-18 11:12 ` Takashi Iwai [this message]
  -- strict thread matches above, loose matches on Subject: below --
2011-10-04 13:47 Mark Brown
2011-10-04 14:11 ` Takashi Iwai
2011-10-04 14:23   ` Mark Brown
2011-10-04 14:38     ` Takashi Iwai
2011-09-27 12:31 Mark Brown
2011-09-27 12:44 ` Takashi Iwai
2011-09-22 17:17 Mark Brown
2011-09-22 18:02 ` Takashi Iwai
2011-09-26  5:27 ` Scott Jiang
2011-09-26 12:36   ` Mark Brown
2011-09-08 18:22 Mark Brown
2011-08-25 11:07 Mark Brown
2011-08-25 12:08 ` Takashi Iwai
2011-08-21 12:08 Mark Brown
2011-08-21 13:47 ` Takashi Iwai
2011-08-21 16:00   ` Mark Brown
2011-08-21 16:25     ` Takashi Iwai
2011-08-21 16:46       ` Mark Brown
2011-08-12 16:11 Mark Brown
2011-08-12 16:26 ` Takashi Iwai
2011-08-04  4:11 Mark Brown
2011-08-04 14:21 ` Takashi Iwai
2011-07-25  7:05 Mark Brown
2011-07-25  7:42 ` Takashi Iwai
2011-07-13 23:58 Mark Brown
2011-07-09  9:20 Mark Brown
2011-07-05  6:16 Mark Brown
2011-07-05  6:22 ` Takashi Iwai
2011-06-24 10:36 Mark Brown
2011-06-24 10:59 ` Takashi Iwai
2011-06-10 12:03 Mark Brown
2011-06-10 12:04 ` Mark Brown
2011-06-10 12:23   ` Takashi Iwai
2011-05-30  3:20 Mark Brown
2011-06-02 17:54 ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hhb6jkfkc.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=lrg@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.