* [PATCH 4.19 001/125] bonding: fix state transition issue in link monitoring
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-13 9:56 ` Po-Hsu Lin
2019-11-11 18:27 ` [PATCH 4.19 002/125] CDC-NCM: handle incomplete transfer of MTU Greg Kroah-Hartman
` (127 subsequent siblings)
128 siblings, 1 reply; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aleksei Zakharov, Sha Zhang,
Mahesh Bandewar, Jay Vosburgh, David S. Miller
From: Jay Vosburgh <jay.vosburgh@canonical.com>
[ Upstream commit 1899bb325149e481de31a4f32b59ea6f24e176ea ]
Since de77ecd4ef02 ("bonding: improve link-status update in
mii-monitoring"), the bonding driver has utilized two separate variables
to indicate the next link state a particular slave should transition to.
Each is used to communicate to a different portion of the link state
change commit logic; one to the bond_miimon_commit function itself, and
another to the state transition logic.
Unfortunately, the two variables can become unsynchronized,
resulting in incorrect link state transitions within bonding. This can
cause slaves to become stuck in an incorrect link state until a
subsequent carrier state transition.
The issue occurs when a special case in bond_slave_netdev_event
sets slave->link directly to BOND_LINK_FAIL. On the next pass through
bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL
case will set the proposed next state (link_new_state) to BOND_LINK_UP,
but the new_link to BOND_LINK_DOWN. The setting of the final link state
from new_link comes after that from link_new_state, and so the slave
will end up incorrectly in _DOWN state.
Resolve this by combining the two variables into one.
Reported-by: Aleksei Zakharov <zakharov.a.g@yandex.ru>
Reported-by: Sha Zhang <zhangsha.zhang@huawei.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring")
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/bonding/bond_main.c | 41 +++++++++++++++++++---------------------
include/net/bonding.h | 3 --
2 files changed, 21 insertions(+), 23 deletions(-)
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2074,8 +2074,7 @@ static int bond_miimon_inspect(struct bo
ignore_updelay = !rcu_dereference(bond->curr_active_slave);
bond_for_each_slave_rcu(bond, slave, iter) {
- slave->new_link = BOND_LINK_NOCHANGE;
- slave->link_new_state = slave->link;
+ bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
link_state = bond_check_dev_link(bond, slave->dev, 0);
@@ -2111,7 +2110,7 @@ static int bond_miimon_inspect(struct bo
}
if (slave->delay <= 0) {
- slave->new_link = BOND_LINK_DOWN;
+ bond_propose_link_state(slave, BOND_LINK_DOWN);
commit++;
continue;
}
@@ -2150,7 +2149,7 @@ static int bond_miimon_inspect(struct bo
slave->delay = 0;
if (slave->delay <= 0) {
- slave->new_link = BOND_LINK_UP;
+ bond_propose_link_state(slave, BOND_LINK_UP);
commit++;
ignore_updelay = false;
continue;
@@ -2188,7 +2187,7 @@ static void bond_miimon_commit(struct bo
struct slave *slave, *primary;
bond_for_each_slave(bond, slave, iter) {
- switch (slave->new_link) {
+ switch (slave->link_new_state) {
case BOND_LINK_NOCHANGE:
/* For 802.3ad mode, check current slave speed and
* duplex again in case its port was disabled after
@@ -2263,8 +2262,8 @@ static void bond_miimon_commit(struct bo
default:
netdev_err(bond->dev, "invalid new link %d on slave %s\n",
- slave->new_link, slave->dev->name);
- slave->new_link = BOND_LINK_NOCHANGE;
+ slave->link_new_state, slave->dev->name);
+ bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
continue;
}
@@ -2664,13 +2663,13 @@ static void bond_loadbalance_arp_mon(str
bond_for_each_slave_rcu(bond, slave, iter) {
unsigned long trans_start = dev_trans_start(slave->dev);
- slave->new_link = BOND_LINK_NOCHANGE;
+ bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
if (slave->link != BOND_LINK_UP) {
if (bond_time_in_interval(bond, trans_start, 1) &&
bond_time_in_interval(bond, slave->last_rx, 1)) {
- slave->new_link = BOND_LINK_UP;
+ bond_propose_link_state(slave, BOND_LINK_UP);
slave_state_changed = 1;
/* primary_slave has no meaning in round-robin
@@ -2697,7 +2696,7 @@ static void bond_loadbalance_arp_mon(str
if (!bond_time_in_interval(bond, trans_start, 2) ||
!bond_time_in_interval(bond, slave->last_rx, 2)) {
- slave->new_link = BOND_LINK_DOWN;
+ bond_propose_link_state(slave, BOND_LINK_DOWN);
slave_state_changed = 1;
if (slave->link_failure_count < UINT_MAX)
@@ -2729,8 +2728,8 @@ static void bond_loadbalance_arp_mon(str
goto re_arm;
bond_for_each_slave(bond, slave, iter) {
- if (slave->new_link != BOND_LINK_NOCHANGE)
- slave->link = slave->new_link;
+ if (slave->link_new_state != BOND_LINK_NOCHANGE)
+ slave->link = slave->link_new_state;
}
if (slave_state_changed) {
@@ -2753,9 +2752,9 @@ re_arm:
}
/* Called to inspect slaves for active-backup mode ARP monitor link state
- * changes. Sets new_link in slaves to specify what action should take
- * place for the slave. Returns 0 if no changes are found, >0 if changes
- * to link states must be committed.
+ * changes. Sets proposed link state in slaves to specify what action
+ * should take place for the slave. Returns 0 if no changes are found, >0
+ * if changes to link states must be committed.
*
* Called with rcu_read_lock held.
*/
@@ -2767,12 +2766,12 @@ static int bond_ab_arp_inspect(struct bo
int commit = 0;
bond_for_each_slave_rcu(bond, slave, iter) {
- slave->new_link = BOND_LINK_NOCHANGE;
+ bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
last_rx = slave_last_rx(bond, slave);
if (slave->link != BOND_LINK_UP) {
if (bond_time_in_interval(bond, last_rx, 1)) {
- slave->new_link = BOND_LINK_UP;
+ bond_propose_link_state(slave, BOND_LINK_UP);
commit++;
}
continue;
@@ -2800,7 +2799,7 @@ static int bond_ab_arp_inspect(struct bo
if (!bond_is_active_slave(slave) &&
!rcu_access_pointer(bond->current_arp_slave) &&
!bond_time_in_interval(bond, last_rx, 3)) {
- slave->new_link = BOND_LINK_DOWN;
+ bond_propose_link_state(slave, BOND_LINK_DOWN);
commit++;
}
@@ -2813,7 +2812,7 @@ static int bond_ab_arp_inspect(struct bo
if (bond_is_active_slave(slave) &&
(!bond_time_in_interval(bond, trans_start, 2) ||
!bond_time_in_interval(bond, last_rx, 2))) {
- slave->new_link = BOND_LINK_DOWN;
+ bond_propose_link_state(slave, BOND_LINK_DOWN);
commit++;
}
}
@@ -2833,7 +2832,7 @@ static void bond_ab_arp_commit(struct bo
struct slave *slave;
bond_for_each_slave(bond, slave, iter) {
- switch (slave->new_link) {
+ switch (slave->link_new_state) {
case BOND_LINK_NOCHANGE:
continue;
@@ -2886,7 +2885,7 @@ static void bond_ab_arp_commit(struct bo
default:
netdev_err(bond->dev, "impossible: new_link %d on slave %s\n",
- slave->new_link, slave->dev->name);
+ slave->link_new_state, slave->dev->name);
continue;
}
--- a/include/net/bonding.h
+++ b/include/net/bonding.h
@@ -149,7 +149,6 @@ struct slave {
unsigned long target_last_arp_rx[BOND_MAX_ARP_TARGETS];
s8 link; /* one of BOND_LINK_XXXX */
s8 link_new_state; /* one of BOND_LINK_XXXX */
- s8 new_link;
u8 backup:1, /* indicates backup slave. Value corresponds with
BOND_STATE_ACTIVE and BOND_STATE_BACKUP */
inactive:1, /* indicates inactive slave */
@@ -539,7 +538,7 @@ static inline void bond_propose_link_sta
static inline void bond_commit_link_state(struct slave *slave, bool notify)
{
- if (slave->link == slave->link_new_state)
+ if (slave->link_new_state == BOND_LINK_NOCHANGE)
return;
slave->link = slave->link_new_state;
^ permalink raw reply [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 001/125] bonding: fix state transition issue in link monitoring
2019-11-11 18:27 ` [PATCH 4.19 001/125] bonding: fix state transition issue in link monitoring Greg Kroah-Hartman
@ 2019-11-13 9:56 ` Po-Hsu Lin
0 siblings, 0 replies; 145+ messages in thread
From: Po-Hsu Lin @ 2019-11-13 9:56 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Aleksei Zakharov, Sha Zhang,
Mahesh Bandewar, Jay Vosburgh, David S. Miller
On Tue, Nov 12, 2019 at 3:05 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> From: Jay Vosburgh <jay.vosburgh@canonical.com>
>
> [ Upstream commit 1899bb325149e481de31a4f32b59ea6f24e176ea ]
>
> Since de77ecd4ef02 ("bonding: improve link-status update in
> mii-monitoring"), the bonding driver has utilized two separate variables
> to indicate the next link state a particular slave should transition to.
> Each is used to communicate to a different portion of the link state
> change commit logic; one to the bond_miimon_commit function itself, and
> another to the state transition logic.
>
> Unfortunately, the two variables can become unsynchronized,
> resulting in incorrect link state transitions within bonding. This can
> cause slaves to become stuck in an incorrect link state until a
> subsequent carrier state transition.
>
> The issue occurs when a special case in bond_slave_netdev_event
> sets slave->link directly to BOND_LINK_FAIL. On the next pass through
> bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL
> case will set the proposed next state (link_new_state) to BOND_LINK_UP,
> but the new_link to BOND_LINK_DOWN. The setting of the final link state
> from new_link comes after that from link_new_state, and so the slave
> will end up incorrectly in _DOWN state.
>
> Resolve this by combining the two variables into one.
>
> Reported-by: Aleksei Zakharov <zakharov.a.g@yandex.ru>
> Reported-by: Sha Zhang <zhangsha.zhang@huawei.com>
> Cc: Mahesh Bandewar <maheshb@google.com>
> Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring")
> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
> drivers/net/bonding/bond_main.c | 41 +++++++++++++++++++---------------------
> include/net/bonding.h | 3 --
> 2 files changed, 21 insertions(+), 23 deletions(-)
>
> --- a/drivers/net/bonding/bond_main.c
> +++ b/drivers/net/bonding/bond_main.c
> @@ -2074,8 +2074,7 @@ static int bond_miimon_inspect(struct bo
> ignore_updelay = !rcu_dereference(bond->curr_active_slave);
>
> bond_for_each_slave_rcu(bond, slave, iter) {
> - slave->new_link = BOND_LINK_NOCHANGE;
> - slave->link_new_state = slave->link;
> + bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
>
> link_state = bond_check_dev_link(bond, slave->dev, 0);
>
> @@ -2111,7 +2110,7 @@ static int bond_miimon_inspect(struct bo
> }
>
> if (slave->delay <= 0) {
> - slave->new_link = BOND_LINK_DOWN;
> + bond_propose_link_state(slave, BOND_LINK_DOWN);
> commit++;
> continue;
> }
> @@ -2150,7 +2149,7 @@ static int bond_miimon_inspect(struct bo
> slave->delay = 0;
>
> if (slave->delay <= 0) {
> - slave->new_link = BOND_LINK_UP;
> + bond_propose_link_state(slave, BOND_LINK_UP);
> commit++;
> ignore_updelay = false;
> continue;
> @@ -2188,7 +2187,7 @@ static void bond_miimon_commit(struct bo
> struct slave *slave, *primary;
>
> bond_for_each_slave(bond, slave, iter) {
> - switch (slave->new_link) {
> + switch (slave->link_new_state) {
> case BOND_LINK_NOCHANGE:
> /* For 802.3ad mode, check current slave speed and
> * duplex again in case its port was disabled after
> @@ -2263,8 +2262,8 @@ static void bond_miimon_commit(struct bo
>
> default:
> netdev_err(bond->dev, "invalid new link %d on slave %s\n",
> - slave->new_link, slave->dev->name);
> - slave->new_link = BOND_LINK_NOCHANGE;
> + slave->link_new_state, slave->dev->name);
> + bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
>
> continue;
> }
> @@ -2664,13 +2663,13 @@ static void bond_loadbalance_arp_mon(str
> bond_for_each_slave_rcu(bond, slave, iter) {
> unsigned long trans_start = dev_trans_start(slave->dev);
>
> - slave->new_link = BOND_LINK_NOCHANGE;
> + bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
>
> if (slave->link != BOND_LINK_UP) {
> if (bond_time_in_interval(bond, trans_start, 1) &&
> bond_time_in_interval(bond, slave->last_rx, 1)) {
>
> - slave->new_link = BOND_LINK_UP;
> + bond_propose_link_state(slave, BOND_LINK_UP);
> slave_state_changed = 1;
>
> /* primary_slave has no meaning in round-robin
> @@ -2697,7 +2696,7 @@ static void bond_loadbalance_arp_mon(str
> if (!bond_time_in_interval(bond, trans_start, 2) ||
> !bond_time_in_interval(bond, slave->last_rx, 2)) {
>
> - slave->new_link = BOND_LINK_DOWN;
> + bond_propose_link_state(slave, BOND_LINK_DOWN);
> slave_state_changed = 1;
>
> if (slave->link_failure_count < UINT_MAX)
> @@ -2729,8 +2728,8 @@ static void bond_loadbalance_arp_mon(str
> goto re_arm;
>
> bond_for_each_slave(bond, slave, iter) {
> - if (slave->new_link != BOND_LINK_NOCHANGE)
> - slave->link = slave->new_link;
> + if (slave->link_new_state != BOND_LINK_NOCHANGE)
> + slave->link = slave->link_new_state;
> }
>
> if (slave_state_changed) {
> @@ -2753,9 +2752,9 @@ re_arm:
> }
>
> /* Called to inspect slaves for active-backup mode ARP monitor link state
> - * changes. Sets new_link in slaves to specify what action should take
> - * place for the slave. Returns 0 if no changes are found, >0 if changes
> - * to link states must be committed.
> + * changes. Sets proposed link state in slaves to specify what action
> + * should take place for the slave. Returns 0 if no changes are found, >0
> + * if changes to link states must be committed.
> *
> * Called with rcu_read_lock held.
> */
> @@ -2767,12 +2766,12 @@ static int bond_ab_arp_inspect(struct bo
> int commit = 0;
>
> bond_for_each_slave_rcu(bond, slave, iter) {
> - slave->new_link = BOND_LINK_NOCHANGE;
> + bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
> last_rx = slave_last_rx(bond, slave);
>
> if (slave->link != BOND_LINK_UP) {
> if (bond_time_in_interval(bond, last_rx, 1)) {
> - slave->new_link = BOND_LINK_UP;
> + bond_propose_link_state(slave, BOND_LINK_UP);
> commit++;
> }
> continue;
> @@ -2800,7 +2799,7 @@ static int bond_ab_arp_inspect(struct bo
> if (!bond_is_active_slave(slave) &&
> !rcu_access_pointer(bond->current_arp_slave) &&
> !bond_time_in_interval(bond, last_rx, 3)) {
> - slave->new_link = BOND_LINK_DOWN;
> + bond_propose_link_state(slave, BOND_LINK_DOWN);
> commit++;
> }
>
> @@ -2813,7 +2812,7 @@ static int bond_ab_arp_inspect(struct bo
> if (bond_is_active_slave(slave) &&
> (!bond_time_in_interval(bond, trans_start, 2) ||
> !bond_time_in_interval(bond, last_rx, 2))) {
> - slave->new_link = BOND_LINK_DOWN;
> + bond_propose_link_state(slave, BOND_LINK_DOWN);
> commit++;
> }
> }
> @@ -2833,7 +2832,7 @@ static void bond_ab_arp_commit(struct bo
> struct slave *slave;
>
> bond_for_each_slave(bond, slave, iter) {
> - switch (slave->new_link) {
> + switch (slave->link_new_state) {
> case BOND_LINK_NOCHANGE:
> continue;
>
> @@ -2886,7 +2885,7 @@ static void bond_ab_arp_commit(struct bo
>
> default:
> netdev_err(bond->dev, "impossible: new_link %d on slave %s\n",
Hello,
I think the error message here should be: "impossible: link_new_state
%d on slave %s\n" instead?
As in the upstream commit it's:
slave_err(bond->dev, slave->dev,
"impossible: link_new_state %d on slave\n",
slave->link_new_state);
Thanks
> - slave->new_link, slave->dev->name);
> + slave->link_new_state, slave->dev->name);
> continue;
> }
>
> --- a/include/net/bonding.h
> +++ b/include/net/bonding.h
> @@ -149,7 +149,6 @@ struct slave {
> unsigned long target_last_arp_rx[BOND_MAX_ARP_TARGETS];
> s8 link; /* one of BOND_LINK_XXXX */
> s8 link_new_state; /* one of BOND_LINK_XXXX */
> - s8 new_link;
> u8 backup:1, /* indicates backup slave. Value corresponds with
> BOND_STATE_ACTIVE and BOND_STATE_BACKUP */
> inactive:1, /* indicates inactive slave */
> @@ -539,7 +538,7 @@ static inline void bond_propose_link_sta
>
> static inline void bond_commit_link_state(struct slave *slave, bool notify)
> {
> - if (slave->link == slave->link_new_state)
> + if (slave->link_new_state == BOND_LINK_NOCHANGE)
> return;
>
> slave->link = slave->link_new_state;
>
>
^ permalink raw reply [flat|nested] 145+ messages in thread
* [PATCH 4.19 002/125] CDC-NCM: handle incomplete transfer of MTU
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 001/125] bonding: fix state transition issue in link monitoring Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 003/125] ipv4: Fix table id reference in fib_sync_down_addr Greg Kroah-Hartman
` (126 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oliver Neukum, David S. Miller,
syzbot+0631d878823ce2411636
From: Oliver Neukum <oneukum@suse.com>
[ Upstream commit 332f989a3b0041b810836c5c3747e59aad7e9d0b ]
A malicious device may give half an answer when asked
for its MTU. The driver will proceed after this with
a garbage MTU. Anything but a complete answer must be treated
as an error.
V2: used sizeof as request by Alexander
Reported-and-tested-by: syzbot+0631d878823ce2411636@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/cdc_ncm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -578,8 +578,8 @@ static void cdc_ncm_set_dgram_size(struc
/* read current mtu value from device */
err = usbnet_read_cmd(dev, USB_CDC_GET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
- 0, iface_no, &max_datagram_size, 2);
- if (err < 0) {
+ 0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
+ if (err < sizeof(max_datagram_size)) {
dev_dbg(&dev->intf->dev, "GET_MAX_DATAGRAM_SIZE failed\n");
goto out;
}
@@ -590,7 +590,7 @@ static void cdc_ncm_set_dgram_size(struc
max_datagram_size = cpu_to_le16(ctx->max_datagram_size);
err = usbnet_write_cmd(dev, USB_CDC_SET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE,
- 0, iface_no, &max_datagram_size, 2);
+ 0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
if (err < 0)
dev_dbg(&dev->intf->dev, "SET_MAX_DATAGRAM_SIZE failed\n");
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 003/125] ipv4: Fix table id reference in fib_sync_down_addr
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 001/125] bonding: fix state transition issue in link monitoring Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 002/125] CDC-NCM: handle incomplete transfer of MTU Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 004/125] net: ethernet: octeon_mgmt: Account for second possible VLAN header Greg Kroah-Hartman
` (125 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hendrik Donner, David Ahern, David S. Miller
From: David Ahern <dsahern@kernel.org>
[ Upstream commit e0a312629fefa943534fc46f7bfbe6de3fdaf463 ]
Hendrik reported routes in the main table using source address are not
removed when the address is removed. The problem is that fib_sync_down_addr
does not account for devices in the default VRF which are associated
with the main table. Fix by updating the table id reference.
Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Reported-by: Hendrik Donner <hd@os-cillation.de>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/fib_semantics.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -1421,8 +1421,8 @@ int fib_sync_down_addr(struct net_device
int ret = 0;
unsigned int hash = fib_laddr_hashfn(local);
struct hlist_head *head = &fib_info_laddrhash[hash];
+ int tb_id = l3mdev_fib_table(dev) ? : RT_TABLE_MAIN;
struct net *net = dev_net(dev);
- int tb_id = l3mdev_fib_table(dev);
struct fib_info *fi;
if (!fib_info_laddrhash || local == 0)
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 004/125] net: ethernet: octeon_mgmt: Account for second possible VLAN header
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (2 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 003/125] ipv4: Fix table id reference in fib_sync_down_addr Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 005/125] net: fix data-race in neigh_event_send() Greg Kroah-Hartman
` (124 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Sverdlin, David S. Miller
From: Alexander Sverdlin <alexander.sverdlin@nokia.com>
[ Upstream commit e4dd5608033efe7b6030cde359bfdbaeb73bc22d ]
Octeon's input ring-buffer entry has 14 bits-wide size field, so to account
for second possible VLAN header max_mtu must be further reduced.
Fixes: 109cc16526c6d ("ethernet/cavium: use core min/max MTU checking")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/cavium/octeon/octeon_mgmt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
+++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
@@ -1495,7 +1495,7 @@ static int octeon_mgmt_probe(struct plat
netdev->ethtool_ops = &octeon_mgmt_ethtool_ops;
netdev->min_mtu = 64 - OCTEON_MGMT_RX_HEADROOM;
- netdev->max_mtu = 16383 - OCTEON_MGMT_RX_HEADROOM;
+ netdev->max_mtu = 16383 - OCTEON_MGMT_RX_HEADROOM - VLAN_HLEN;
mac = of_get_mac_address(pdev->dev.of_node);
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 005/125] net: fix data-race in neigh_event_send()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (3 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 004/125] net: ethernet: octeon_mgmt: Account for second possible VLAN header Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 006/125] net: qualcomm: rmnet: Fix potential UAF when unregistering Greg Kroah-Hartman
` (123 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, syzbot, David S. Miller
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 1b53d64435d56902fc234ff2507142d971a09687 ]
KCSAN reported the following data-race [1]
The fix will also prevent the compiler from optimizing out
the condition.
[1]
BUG: KCSAN: data-race in neigh_resolve_output / neigh_resolve_output
write to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 1:
neigh_event_send include/net/neighbour.h:443 [inline]
neigh_resolve_output+0x78/0x480 net/core/neighbour.c:1474
neigh_output include/net/neighbour.h:511 [inline]
ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:436 [inline]
ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
ip_queue_xmit+0x45/0x60 include/net/ip.h:237
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
__tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:618
read to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 0:
neigh_event_send include/net/neighbour.h:442 [inline]
neigh_resolve_output+0x57/0x480 net/core/neighbour.c:1474
neigh_output include/net/neighbour.h:511 [inline]
ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:436 [inline]
ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
ip_queue_xmit+0x45/0x60 include/net/ip.h:237
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
__tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/neighbour.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -430,8 +430,8 @@ static inline int neigh_event_send(struc
{
unsigned long now = jiffies;
- if (neigh->used != now)
- neigh->used = now;
+ if (READ_ONCE(neigh->used) != now)
+ WRITE_ONCE(neigh->used, now);
if (!(neigh->nud_state&(NUD_CONNECTED|NUD_DELAY|NUD_PROBE)))
return __neigh_event_send(neigh, skb);
return 0;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 006/125] net: qualcomm: rmnet: Fix potential UAF when unregistering
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (4 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 005/125] net: fix data-race in neigh_event_send() Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 007/125] net: usb: qmi_wwan: add support for DW5821e with eSIM support Greg Kroah-Hartman
` (122 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sean Tranchetti, David S. Miller
From: Sean Tranchetti <stranche@codeaurora.org>
[ Upstream commit e7a86c687e64ab24f88330ad24ecc9442ce40c5a ]
During the exit/unregistration process of the RmNet driver, the function
rmnet_unregister_real_device() is called to handle freeing the driver's
internal state and removing the RX handler on the underlying physical
device. However, the order of operations this function performs is wrong
and can lead to a use after free of the rmnet_port structure.
Before calling netdev_rx_handler_unregister(), this port structure is
freed with kfree(). If packets are received on any RmNet devices before
synchronize_net() completes, they will attempt to use this already-freed
port structure when processing the packet. As such, before cleaning up any
other internal state, the RX handler must be unregistered in order to
guarantee that no further packets will arrive on the device.
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -66,10 +66,10 @@ static int rmnet_unregister_real_device(
if (port->nr_rmnet_devs)
return -EINVAL;
- kfree(port);
-
netdev_rx_handler_unregister(real_dev);
+ kfree(port);
+
/* release reference on real_dev */
dev_put(real_dev);
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 007/125] net: usb: qmi_wwan: add support for DW5821e with eSIM support
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (5 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 006/125] net: qualcomm: rmnet: Fix potential UAF when unregistering Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 008/125] NFC: fdp: fix incorrect free object Greg Kroah-Hartman
` (121 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aleksander Morgado, David S. Miller
From: Aleksander Morgado <aleksander@aleksander.es>
[ Upstream commit e497df686e8fed8c1dd69179010656362858edb3 ]
Exactly same layout as the default DW5821e module, just a different
vid/pid.
The QMI interface is exposed in USB configuration #1:
P: Vendor=413c ProdID=81e0 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5821e-eSIM Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/qmi_wwan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1297,6 +1297,7 @@ static const struct usb_device_id produc
{QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */
{QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */
{QMI_FIXED_INTF(0x413c, 0x81d7, 0)}, /* Dell Wireless 5821e */
+ {QMI_FIXED_INTF(0x413c, 0x81e0, 0)}, /* Dell Wireless 5821e with eSIM support*/
{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
{QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */
{QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 008/125] NFC: fdp: fix incorrect free object
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (6 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 007/125] net: usb: qmi_wwan: add support for DW5821e with eSIM support Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 009/125] nfc: netlink: fix double device reference drop Greg Kroah-Hartman
` (120 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pan Bian, David S. Miller
From: Pan Bian <bianpan2016@163.com>
[ Upstream commit 517ce4e93368938b204451285e53014549804868 ]
The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is
incorrect, which may result in a system crash or other security impacts.
The expected object to free is *fw_vsc_cfg.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/nfc/fdp/i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/nfc/fdp/i2c.c
+++ b/drivers/nfc/fdp/i2c.c
@@ -267,7 +267,7 @@ static void fdp_nci_i2c_read_device_prop
*fw_vsc_cfg, len);
if (r) {
- devm_kfree(dev, fw_vsc_cfg);
+ devm_kfree(dev, *fw_vsc_cfg);
goto vsc_read_err;
}
} else {
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 009/125] nfc: netlink: fix double device reference drop
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (7 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 008/125] NFC: fdp: fix incorrect free object Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 010/125] NFC: st21nfca: fix double free Greg Kroah-Hartman
` (119 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pan Bian, Johan Hovold, David S. Miller
From: Pan Bian <bianpan2016@163.com>
[ Upstream commit 025ec40b81d785a98f76b8bdb509ac10773b4f12 ]
The function nfc_put_device(dev) is called twice to drop the reference
to dev when there is no associated local llcp. Remove one of them to fix
the bug.
Fixes: 52feb444a903 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support")
Fixes: d9b8d8e19b07 ("NFC: llcp: Service Name Lookup netlink interface")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/nfc/netlink.c | 2 --
1 file changed, 2 deletions(-)
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -1110,7 +1110,6 @@ static int nfc_genl_llc_set_params(struc
local = nfc_llcp_find_local(dev);
if (!local) {
- nfc_put_device(dev);
rc = -ENODEV;
goto exit;
}
@@ -1170,7 +1169,6 @@ static int nfc_genl_llc_sdreq(struct sk_
local = nfc_llcp_find_local(dev);
if (!local) {
- nfc_put_device(dev);
rc = -ENODEV;
goto exit;
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 010/125] NFC: st21nfca: fix double free
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (8 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 009/125] nfc: netlink: fix double device reference drop Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 011/125] qede: fix NULL pointer deref in __qede_remove() Greg Kroah-Hartman
` (118 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pan Bian, David S. Miller
From: Pan Bian <bianpan2016@163.com>
[ Upstream commit 99a8efbb6e30b72ac98cecf81103f847abffb1e5 ]
The variable nfcid_skb is not changed in the callee nfc_hci_get_param()
if error occurs. Consequently, the freed variable nfcid_skb will be
freed again, resulting in a double free bug. Set nfcid_skb to NULL after
releasing it to fix the bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/nfc/st21nfca/core.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/nfc/st21nfca/core.c
+++ b/drivers/nfc/st21nfca/core.c
@@ -719,6 +719,7 @@ static int st21nfca_hci_complete_target_
NFC_PROTO_FELICA_MASK;
} else {
kfree_skb(nfcid_skb);
+ nfcid_skb = NULL;
/* P2P in type A */
r = nfc_hci_get_param(hdev, ST21NFCA_RF_READER_F_GATE,
ST21NFCA_RF_READER_F_NFCID1,
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 011/125] qede: fix NULL pointer deref in __qede_remove()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (9 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 010/125] NFC: st21nfca: fix double free Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 012/125] net: mscc: ocelot: dont handle netdev events for other netdevs Greg Kroah-Hartman
` (117 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manish Chopra, Ariel Elior,
Sudarsana Kalluru, David S. Miller
From: Manish Chopra <manishc@marvell.com>
[ Upstream commit deabc87111c690097c03765ea017cd500f7376fc ]
While rebooting the system with SR-IOV vfs enabled leads
to below crash due to recurrence of __qede_remove() on the VF
devices (first from .shutdown() flow of the VF itself and
another from PF's .shutdown() flow executing pci_disable_sriov())
This patch adds a safeguard in __qede_remove() flow to fix this,
so that driver doesn't attempt to remove "already removed" devices.
[ 194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc
[ 194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.360304] PGD 0
[ 194.360325] Oops: 0000 [#1] SMP
[ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200
[ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1
[ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019
[ 194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000
[ 194.361463] RIP: 0010:[<ffffffffc03553c4>] [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.361534] RSP: 0018:ffff9ceabebdfac0 EFLAGS: 00010282
[ 194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000
[ 194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098
[ 194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000
[ 194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000
[ 194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000
[ 194.361810] FS: 00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000
[ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0
[ 194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 194.362051] PKRU: 55555554
[ 194.362073] Call Trace:
[ 194.362109] [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede]
[ 194.362180] [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0
[ 194.362240] [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0
[ 194.362285] [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30
[ 194.362343] [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0
[ 194.362388] [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20
[ 194.362450] [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160
[ 194.362496] [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0
[ 194.362534] [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30
[ 194.362599] [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed]
[ 194.362658] [<ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362709] [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed]
[ 194.362754] [<ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362803] [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed]
[ 194.362854] [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede]
[ 194.362904] [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede]
[ 194.362956] [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60
[ 194.363010] [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0
[ 194.363066] [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40
[ 194.363107] [<ffffffffb94b66e2>] kernel_restart+0x12/0x60
[ 194.363146] [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260
[ 194.363196] [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0
[ 194.363253] [<ffffffffb942b621>] ? __switch_to+0x151/0x580
[ 194.363304] [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0
[ 194.363343] [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10
[ 194.363387] [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a
[ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0
[ 194.363712] RIP [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.363764] RSP <ffff9ceabebdfac0>
[ 194.363791] CR2: 00000000000008dc
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/qlogic/qede/qede_main.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1170,8 +1170,16 @@ enum qede_remove_mode {
static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode)
{
struct net_device *ndev = pci_get_drvdata(pdev);
- struct qede_dev *edev = netdev_priv(ndev);
- struct qed_dev *cdev = edev->cdev;
+ struct qede_dev *edev;
+ struct qed_dev *cdev;
+
+ if (!ndev) {
+ dev_info(&pdev->dev, "Device has already been removed\n");
+ return;
+ }
+
+ edev = netdev_priv(ndev);
+ cdev = edev->cdev;
DP_INFO(edev, "Starting qede_remove\n");
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 012/125] net: mscc: ocelot: dont handle netdev events for other netdevs
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (10 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 011/125] qede: fix NULL pointer deref in __qede_remove() Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 013/125] net: mscc: ocelot: fix NULL pointer on LAG slave removal Greg Kroah-Hartman
` (116 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Claudiu Manoil, Vladimir Oltean,
David S. Miller
From: Claudiu Manoil <claudiu.manoil@nxp.com>
[ Upstream commit 7afb3e575e5aa9f5a200a3eb3f45d8130f6d6601 ]
The check that the event is actually for this device should be moved
from the "port" handler to the net device handler.
Otherwise the port handler will deny bonding configuration for other
net devices in the same system (like enetc in the LS1028A) that don't
have the lag_upper_info->tx_type restriction that ocelot has.
Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mscc/ocelot.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1506,9 +1506,6 @@ static int ocelot_netdevice_port_event(s
struct ocelot_port *ocelot_port = netdev_priv(dev);
int err = 0;
- if (!ocelot_netdevice_dev_check(dev))
- return 0;
-
switch (event) {
case NETDEV_CHANGEUPPER:
if (netif_is_bridge_master(info->upper_dev)) {
@@ -1545,6 +1542,9 @@ static int ocelot_netdevice_event(struct
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
int ret = 0;
+ if (!ocelot_netdevice_dev_check(dev))
+ return 0;
+
if (event == NETDEV_PRECHANGEUPPER &&
netif_is_lag_master(info->upper_dev)) {
struct netdev_lag_upper_info *lag_upper_info = info->upper_info;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 013/125] net: mscc: ocelot: fix NULL pointer on LAG slave removal
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (11 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 012/125] net: mscc: ocelot: dont handle netdev events for other netdevs Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 014/125] ipv6: fixes rt6_probe() and fib6_nh->last_probe init Greg Kroah-Hartman
` (115 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Claudiu Manoil, Vladimir Oltean,
David S. Miller
From: Claudiu Manoil <claudiu.manoil@nxp.com>
[ Upstream commit 3b3eed8eec47259939ee6c3d58aea1c311ddee3b ]
lag_upper_info may be NULL on slave removal.
Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mscc/ocelot.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1550,7 +1550,8 @@ static int ocelot_netdevice_event(struct
struct netdev_lag_upper_info *lag_upper_info = info->upper_info;
struct netlink_ext_ack *extack;
- if (lag_upper_info->tx_type != NETDEV_LAG_TX_TYPE_HASH) {
+ if (lag_upper_info &&
+ lag_upper_info->tx_type != NETDEV_LAG_TX_TYPE_HASH) {
extack = netdev_notifier_info_to_extack(&info->info);
NL_SET_ERR_MSG_MOD(extack, "LAG device using unsupported Tx type");
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 014/125] ipv6: fixes rt6_probe() and fib6_nh->last_probe init
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (12 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 013/125] net: mscc: ocelot: fix NULL pointer on LAG slave removal Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 015/125] net: hns: Fix the stray netpoll locks causing deadlock in NAPI path Greg Kroah-Hartman
` (114 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, syzbot, David Ahern,
David S. Miller
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 1bef4c223b8588cf50433bdc2c6953d82949b3b3 ]
While looking at a syzbot KCSAN report [1], I found multiple
issues in this code :
1) fib6_nh->last_probe has an initial value of 0.
While probably okay on 64bit kernels, this causes an issue
on 32bit kernels since the time_after(jiffies, 0 + interval)
might be false ~24 days after boot (for HZ=1000)
2) The data-race found by KCSAN
I could use READ_ONCE() and WRITE_ONCE(), but we also can
take the opportunity of not piling-up too many rt6_probe_deferred()
works by using instead cmpxchg() so that only one cpu wins the race.
[1]
BUG: KCSAN: data-race in find_match / find_match
write to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 1:
rt6_probe net/ipv6/route.c:663 [inline]
find_match net/ipv6/route.c:757 [inline]
find_match+0x5bd/0x790 net/ipv6/route.c:733
__find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831
find_rr_leaf net/ipv6/route.c:852 [inline]
rt6_select net/ipv6/route.c:896 [inline]
fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164
ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200
ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452
fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117
ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484
ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497
ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049
ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150
inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106
inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
tcp_xmit_probe_skb+0x19b/0x1d0 net/ipv4/tcp_output.c:3735
read to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 0:
rt6_probe net/ipv6/route.c:657 [inline]
find_match net/ipv6/route.c:757 [inline]
find_match+0x521/0x790 net/ipv6/route.c:733
__find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831
find_rr_leaf net/ipv6/route.c:852 [inline]
rt6_select net/ipv6/route.c:896 [inline]
fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164
ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200
ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452
fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117
ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484
ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497
ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049
ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150
inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106
inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 18894 Comm: udevd Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: cc3a86c802f0 ("ipv6: Change rt6_probe to take a fib6_nh")
Fixes: f547fac624be ("ipv6: rate-limit probes for neighbourless routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv6/route.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -521,6 +521,7 @@ static void rt6_probe(struct fib6_info *
{
struct __rt6_probe_work *work = NULL;
const struct in6_addr *nh_gw;
+ unsigned long last_probe;
struct neighbour *neigh;
struct net_device *dev;
struct inet6_dev *idev;
@@ -539,6 +540,7 @@ static void rt6_probe(struct fib6_info *
nh_gw = &rt->fib6_nh.nh_gw;
dev = rt->fib6_nh.nh_dev;
rcu_read_lock_bh();
+ last_probe = READ_ONCE(rt->last_probe);
idev = __in6_dev_get(dev);
neigh = __ipv6_neigh_lookup_noref(dev, nh_gw);
if (neigh) {
@@ -554,13 +556,15 @@ static void rt6_probe(struct fib6_info *
__neigh_set_probe_once(neigh);
}
write_unlock(&neigh->lock);
- } else if (time_after(jiffies, rt->last_probe +
+ } else if (time_after(jiffies, last_probe +
idev->cnf.rtr_probe_interval)) {
work = kmalloc(sizeof(*work), GFP_ATOMIC);
}
- if (work) {
- rt->last_probe = jiffies;
+ if (!work || cmpxchg(&rt->last_probe,
+ last_probe, jiffies) != last_probe) {
+ kfree(work);
+ } else {
INIT_WORK(&work->work, rt6_probe_deferred);
work->target = *nh_gw;
dev_hold(dev);
@@ -3066,6 +3070,9 @@ static struct fib6_info *ip6_route_info_
if (!rt)
goto out;
+#ifdef CONFIG_IPV6_ROUTER_PREF
+ rt->last_probe = jiffies;
+#endif
if (cfg->fc_flags & RTF_ADDRCONF)
rt->dst_nocount = true;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 015/125] net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (13 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 014/125] ipv6: fixes rt6_probe() and fib6_nh->last_probe init Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 016/125] ALSA: timer: Fix incorrectly assigned timer instance Greg Kroah-Hartman
` (113 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, lipeng, Yisen Zhuang, Eric Dumazet,
David S. Miller, Marc Zyngier, Salil Mehta
From: Salil Mehta <salil.mehta@huawei.com>
[ Upstream commit bf5a6b4c474c589244dc25ee1af2c3c829228ef8 ]
This patch fixes the problem of the spin locks, originally
meant for the netpoll path of hns driver, causing deadlock in
the normal NAPI poll path. The issue happened due to the presence
of the stray leftover spin lock code related to the netpoll,
whose support was earlier removed from the HNS[1], got activated
due to enabling of NET_POLL_CONTROLLER switch.
Earlier background:
The netpoll handling code originally had this bug(as identified
by Marc Zyngier[2]) of wrong spin lock API being used which did
not disable the interrupts and hence could cause locking issues.
i.e. if the lock were first acquired in context to thread like
'ip' util and this lock if ever got later acquired again in
context to the interrupt context like TX/RX (Interrupts could
always pre-empt the lock holding task and acquire the lock again)
and hence could cause deadlock.
Proposed Solution:
1. If the netpoll was enabled in the HNS driver, which is not
right now, we could have simply used spin_[un]lock_irqsave()
2. But as netpoll is disabled, therefore, it is best to get rid
of the existing locks and stray code for now. This should
solve the problem reported by Marc.
[1] https://git.kernel.org/torvalds/c/4bd2c03be7
[2] https://patchwork.ozlabs.org/patch/1189139/
Fixes: 4bd2c03be707 ("net: hns: remove ndo_poll_controller")
Cc: lipeng <lipeng321@huawei.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Reported-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/hisilicon/hns/hnae.c | 1 -
drivers/net/ethernet/hisilicon/hns/hnae.h | 3 ---
drivers/net/ethernet/hisilicon/hns/hns_enet.c | 22 +---------------------
3 files changed, 1 insertion(+), 25 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns/hnae.c
+++ b/drivers/net/ethernet/hisilicon/hns/hnae.c
@@ -203,7 +203,6 @@ hnae_init_ring(struct hnae_queue *q, str
ring->q = q;
ring->flags = flags;
- spin_lock_init(&ring->lock);
ring->coal_param = q->handle->coal_param;
assert(!ring->desc && !ring->desc_cb && !ring->desc_dma_addr);
--- a/drivers/net/ethernet/hisilicon/hns/hnae.h
+++ b/drivers/net/ethernet/hisilicon/hns/hnae.h
@@ -278,9 +278,6 @@ struct hnae_ring {
/* statistic */
struct ring_stats stats;
- /* ring lock for poll one */
- spinlock_t lock;
-
dma_addr_t desc_dma_addr;
u32 buf_size; /* size for hnae_desc->addr, preset by AE */
u16 desc_num; /* total number of desc */
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -947,15 +947,6 @@ static int is_valid_clean_head(struct hn
return u > c ? (h > c && h <= u) : (h > c || h <= u);
}
-/* netif_tx_lock will turn down the performance, set only when necessary */
-#ifdef CONFIG_NET_POLL_CONTROLLER
-#define NETIF_TX_LOCK(ring) spin_lock(&(ring)->lock)
-#define NETIF_TX_UNLOCK(ring) spin_unlock(&(ring)->lock)
-#else
-#define NETIF_TX_LOCK(ring)
-#define NETIF_TX_UNLOCK(ring)
-#endif
-
/* reclaim all desc in one budget
* return error or number of desc left
*/
@@ -969,21 +960,16 @@ static int hns_nic_tx_poll_one(struct hn
int head;
int bytes, pkts;
- NETIF_TX_LOCK(ring);
-
head = readl_relaxed(ring->io_base + RCB_REG_HEAD);
rmb(); /* make sure head is ready before touch any data */
- if (is_ring_empty(ring) || head == ring->next_to_clean) {
- NETIF_TX_UNLOCK(ring);
+ if (is_ring_empty(ring) || head == ring->next_to_clean)
return 0; /* no data to poll */
- }
if (!is_valid_clean_head(ring, head)) {
netdev_err(ndev, "wrong head (%d, %d-%d)\n", head,
ring->next_to_use, ring->next_to_clean);
ring->stats.io_err_cnt++;
- NETIF_TX_UNLOCK(ring);
return -EIO;
}
@@ -998,8 +984,6 @@ static int hns_nic_tx_poll_one(struct hn
ring->stats.tx_pkts += pkts;
ring->stats.tx_bytes += bytes;
- NETIF_TX_UNLOCK(ring);
-
dev_queue = netdev_get_tx_queue(ndev, ring_data->queue_index);
netdev_tx_completed_queue(dev_queue, pkts, bytes);
@@ -1059,16 +1043,12 @@ static void hns_nic_tx_clr_all_bufs(stru
int head;
int bytes, pkts;
- NETIF_TX_LOCK(ring);
-
head = ring->next_to_use; /* ntu :soft setted ring position*/
bytes = 0;
pkts = 0;
while (head != ring->next_to_clean)
hns_nic_reclaim_one_desc(ring, &bytes, &pkts);
- NETIF_TX_UNLOCK(ring);
-
dev_queue = netdev_get_tx_queue(ndev, ring_data->queue_index);
netdev_tx_reset_queue(dev_queue);
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 016/125] ALSA: timer: Fix incorrectly assigned timer instance
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (14 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 015/125] net: hns: Fix the stray netpoll locks causing deadlock in NAPI path Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 017/125] ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series Greg Kroah-Hartman
` (112 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai, Tristan Madani
From: Takashi Iwai <tiwai@suse.de>
commit e7af6307a8a54f0b873960b32b6a644f2d0fbd97 upstream.
The clean up commit 41672c0c24a6 ("ALSA: timer: Simplify error path in
snd_timer_open()") unified the error handling code paths with the
standard goto, but it introduced a subtle bug: the timer instance is
stored in snd_timer_open() incorrectly even if it returns an error.
This may eventually lead to UAF, as spotted by fuzzer.
The culprit is the snd_timer_open() code checks the
SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri.
This variable is supposed to be the newly created instance, but we
(ab-)used it for a temporary check before the actual creation of a
timer instance. After that point, there is another check for the max
number of instances, and it bails out if over the threshold. Before
the refactoring above, it worked fine because the code returned
directly from that point. After the refactoring, however, it jumps to
the unified error path that stores the timeri variable in return --
even if it returns an error. Unfortunately this stored value is kept
in the caller side (snd_timer_user_tselect()) in tu->timeri. This
causes inconsistency later, as if the timer was successfully
assigned.
In this patch, we fix it by not re-using timeri variable but a
temporary variable for testing the exclusive connection, so timeri
remains NULL at that point.
Fixes: 41672c0c24a6 ("ALSA: timer: Simplify error path in snd_timer_open()")
Reported-and-tested-by: Tristan Madani <tristmd@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191106165547.23518-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/timer.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -298,11 +298,11 @@ int snd_timer_open(struct snd_timer_inst
goto unlock;
}
if (!list_empty(&timer->open_list_head)) {
- timeri = list_entry(timer->open_list_head.next,
+ struct snd_timer_instance *t =
+ list_entry(timer->open_list_head.next,
struct snd_timer_instance, open_list);
- if (timeri->flags & SNDRV_TIMER_IFLG_EXCLUSIVE) {
+ if (t->flags & SNDRV_TIMER_IFLG_EXCLUSIVE) {
err = -EBUSY;
- timeri = NULL;
goto unlock;
}
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 017/125] ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (15 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 016/125] ALSA: timer: Fix incorrectly assigned timer instance Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 018/125] ALSA: hda/ca0132 - Fix possible workqueue stall Greg Kroah-Hartman
` (111 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
commit 706ad6746a66546daf96d4e4a95e46faf6cf689a upstream.
For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents
configured source of sampling clock. The next lowest 8 bits represents
whether the configured source is actually detected or not just after
the register is changed for the source.
Current implementation evaluates whole the register to detect configured
source. This results in failure due to the next lowest 8 bits when the
source is connected in advance.
This commit fixes the bug.
Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191102150920.20367-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/firewire/bebob/bebob_focusrite.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/firewire/bebob/bebob_focusrite.c
+++ b/sound/firewire/bebob/bebob_focusrite.c
@@ -28,6 +28,8 @@
#define SAFFIRE_CLOCK_SOURCE_SPDIF 1
/* clock sources as returned from register of Saffire Pro 10 and 26 */
+#define SAFFIREPRO_CLOCK_SOURCE_SELECT_MASK 0x000000ff
+#define SAFFIREPRO_CLOCK_SOURCE_DETECT_MASK 0x0000ff00
#define SAFFIREPRO_CLOCK_SOURCE_INTERNAL 0
#define SAFFIREPRO_CLOCK_SOURCE_SKIP 1 /* never used on hardware */
#define SAFFIREPRO_CLOCK_SOURCE_SPDIF 2
@@ -190,6 +192,7 @@ saffirepro_both_clk_src_get(struct snd_b
map = saffirepro_clk_maps[1];
/* In a case that this driver cannot handle the value of register. */
+ value &= SAFFIREPRO_CLOCK_SOURCE_SELECT_MASK;
if (value >= SAFFIREPRO_CLOCK_SOURCE_COUNT || map[value] < 0) {
err = -EIO;
goto end;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 018/125] ALSA: hda/ca0132 - Fix possible workqueue stall
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (16 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 017/125] ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 019/125] mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges Greg Kroah-Hartman
` (110 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 15c2b3cc09a31620914955cb2a89c277c18ee999 upstream.
The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync(). It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.
Fix it by dropping the _sync but does call cancel_delayed_work()
instead.
Fixes: 993884f6a26c ("ALSA: hda/ca0132 - Delay HP amp turnon.")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_ca0132.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -6769,7 +6769,7 @@ static void hp_callback(struct hda_codec
/* Delay enabling the HP amp, to let the mic-detection
* state machine run.
*/
- cancel_delayed_work_sync(&spec->unsol_hp_work);
+ cancel_delayed_work(&spec->unsol_hp_work);
schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500));
tbl = snd_hda_jack_tbl_get(codec, cb->nid);
if (tbl)
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 019/125] mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (17 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 018/125] ALSA: hda/ca0132 - Fix possible workqueue stall Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 020/125] mm, meminit: recalculate pcpu batch and high limits after init completes Greg Kroah-Hartman
` (109 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Johannes Weiner, Shakeel Butt,
Suleiman Souhlal, Michal Hocko, Andrew Morton, Linus Torvalds
From: Johannes Weiner <hannes@cmpxchg.org>
commit 869712fd3de5a90b7ba23ae1272278cddc66b37b upstream.
While upgrading from 4.16 to 5.2, we noticed these allocation errors in
the log of the new kernel:
SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
cache: tw_sock_TCPv6(960:helper-logs), object size: 232, buffer size: 240, default order: 1, min order: 0
node 0: slabs: 5, objs: 170, free: 0
slab_out_of_memory+1
___slab_alloc+969
__slab_alloc+14
kmem_cache_alloc+346
inet_twsk_alloc+60
tcp_time_wait+46
tcp_fin+206
tcp_data_queue+2034
tcp_rcv_state_process+784
tcp_v6_do_rcv+405
__release_sock+118
tcp_close+385
inet_release+46
__sock_release+55
sock_close+17
__fput+170
task_work_run+127
exit_to_usermode_loop+191
do_syscall_64+212
entry_SYSCALL_64_after_hwframe+68
accompanied by an increase in machines going completely radio silent
under memory pressure.
One thing that changed since 4.16 is e699e2c6a654 ("net, mm: account
sock objects to kmemcg"), which made these slab caches subject to cgroup
memory accounting and control.
The problem with that is that cgroups, unlike the page allocator, do not
maintain dedicated atomic reserves. As a cgroup's usage hovers at its
limit, atomic allocations - such as done during network rx - can fail
consistently for extended periods of time. The kernel is not able to
operate under these conditions.
We don't want to revert the culprit patch, because it indeed tracks a
potentially substantial amount of memory used by a cgroup.
We also don't want to implement dedicated atomic reserves for cgroups.
There is no point in keeping a fixed margin of unused bytes in the
cgroup's memory budget to accomodate a consumer that is impossible to
predict - we'd be wasting memory and get into configuration headaches,
not unlike what we have going with min_free_kbytes. We do this for
physical mem because we have to, but cgroups are an accounting game.
Instead, account these privileged allocations to the cgroup, but let
them bypass the configured limit if they have to. This way, we get the
benefits of accounting the consumed memory and have it exert pressure on
the rest of the cgroup, but like with the page allocator, we shift the
burden of reclaimining on behalf of atomic allocations onto the regular
allocations that can block.
Link: http://lkml.kernel.org/r/20191022233708.365764-1-hannes@cmpxchg.org
Fixes: e699e2c6a654 ("net, mm: account sock objects to kmemcg")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/memcontrol.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2225,6 +2225,15 @@ retry:
}
/*
+ * Memcg doesn't have a dedicated reserve for atomic
+ * allocations. But like the global atomic pool, we need to
+ * put the burden of reclaim on regular allocation requests
+ * and let these go through as privileged allocations.
+ */
+ if (gfp_mask & __GFP_ATOMIC)
+ goto force;
+
+ /*
* Unlike in global OOM situations, memcg is not in a physical
* memory shortage. Allow dying and OOM-killed tasks to
* bypass the last charges so that they can exit quickly and
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 020/125] mm, meminit: recalculate pcpu batch and high limits after init completes
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (18 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 019/125] mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 021/125] mm: thp: handle page cache THP correctly in PageTransCompoundMap Greg Kroah-Hartman
` (108 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mel Gorman, Michal Hocko,
Vlastimil Babka, David Hildenbrand, Matt Fleming,
Thomas Gleixner, Borislav Petkov, Qian Cai, Andrew Morton,
Linus Torvalds
From: Mel Gorman <mgorman@techsingularity.net>
commit 3e8fc0075e24338b1117cdff6a79477427b8dbed upstream.
Deferred memory initialisation updates zone->managed_pages during the
initialisation phase but before that finishes, the per-cpu page
allocator (pcpu) calculates the number of pages allocated/freed in
batches as well as the maximum number of pages allowed on a per-cpu
list. As zone->managed_pages is not up to date yet, the pcpu
initialisation calculates inappropriately low batch and high values.
This increases zone lock contention quite severely in some cases with
the degree of severity depending on how many CPUs share a local zone and
the size of the zone. A private report indicated that kernel build
times were excessive with extremely high system CPU usage. A perf
profile indicated that a large chunk of time was lost on zone->lock
contention.
This patch recalculates the pcpu batch and high values after deferred
initialisation completes for every populated zone in the system. It was
tested on a 2-socket AMD EPYC 2 machine using a kernel compilation
workload -- allmodconfig and all available CPUs.
mmtests configuration: config-workload-kernbench-max Configuration was
modified to build on a fresh XFS partition.
kernbench
5.4.0-rc3 5.4.0-rc3
vanilla resetpcpu-v2
Amean user-256 13249.50 ( 0.00%) 16401.31 * -23.79%*
Amean syst-256 14760.30 ( 0.00%) 4448.39 * 69.86%*
Amean elsp-256 162.42 ( 0.00%) 119.13 * 26.65%*
Stddev user-256 42.97 ( 0.00%) 19.15 ( 55.43%)
Stddev syst-256 336.87 ( 0.00%) 6.71 ( 98.01%)
Stddev elsp-256 2.46 ( 0.00%) 0.39 ( 84.03%)
5.4.0-rc3 5.4.0-rc3
vanilla resetpcpu-v2
Duration User 39766.24 49221.79
Duration System 44298.10 13361.67
Duration Elapsed 519.11 388.87
The patch reduces system CPU usage by 69.86% and total build time by
26.65%. The variance of system CPU usage is also much reduced.
Before, this was the breakdown of batch and high values over all zones
was:
256 batch: 1
256 batch: 63
512 batch: 7
256 high: 0
256 high: 378
512 high: 42
512 pcpu pagesets had a batch limit of 7 and a high limit of 42. After
the patch:
256 batch: 1
768 batch: 63
256 high: 0
768 high: 378
[mgorman@techsingularity.net: fix merge/linkage snafu]
Link: http://lkml.kernel.org/r/20191023084705.GD3016@techsingularity.netLink: http://lkml.kernel.org/r/20191021094808.28824-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org> [4.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/page_alloc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1743,6 +1743,14 @@ void __init page_alloc_init_late(void)
wait_for_completion(&pgdat_init_all_done_comp);
/*
+ * The number of managed pages has changed due to the initialisation
+ * so the pcpu batch and high limits needs to be updated or the limits
+ * will be artificially small.
+ */
+ for_each_populated_zone(zone)
+ zone_pcp_update(zone);
+
+ /*
* We initialized the rest of the deferred pages. Permanently disable
* on-demand struct page initialization.
*/
@@ -8011,7 +8019,6 @@ void free_contig_range(unsigned long pfn
}
#endif
-#ifdef CONFIG_MEMORY_HOTPLUG
/*
* The zone indicated has a new number of managed_pages; batch sizes and percpu
* page high values need to be recalulated.
@@ -8025,7 +8032,6 @@ void __meminit zone_pcp_update(struct zo
per_cpu_ptr(zone->pageset, cpu));
mutex_unlock(&pcp_batch_high_lock);
}
-#endif
void zone_pcp_reset(struct zone *zone)
{
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 021/125] mm: thp: handle page cache THP correctly in PageTransCompoundMap
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (19 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 020/125] mm, meminit: recalculate pcpu batch and high limits after init completes Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 022/125] mm, vmstat: hide /proc/pagetypeinfo from normal users Greg Kroah-Hartman
` (107 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yang Shi, Gang Deng, Hugh Dickins,
Kirill A. Shutemov, Andrea Arcangeli, Matthew Wilcox,
Andrew Morton, Linus Torvalds
From: Yang Shi <yang.shi@linux.alibaba.com>
commit 169226f7e0d275c1879551f37484ef6683579a5c upstream.
We have a usecase to use tmpfs as QEMU memory backend and we would like
to take the advantage of THP as well. But, our test shows the EPT is
not PMD mapped even though the underlying THP are PMD mapped on host.
The number showed by /sys/kernel/debug/kvm/largepage is much less than
the number of PMD mapped shmem pages as the below:
7f2778200000-7f2878200000 rw-s 00000000 00:14 262232 /dev/shm/qemu_back_mem.mem.Hz2hSf (deleted)
Size: 4194304 kB
[snip]
AnonHugePages: 0 kB
ShmemPmdMapped: 579584 kB
[snip]
Locked: 0 kB
cat /sys/kernel/debug/kvm/largepages
12
And some benchmarks do worse than with anonymous THPs.
By digging into the code we figured out that commit 127393fbe597 ("mm:
thp: kvm: fix memory corruption in KVM with THP enabled") checks if
there is a single PTE mapping on the page for anonymous THP when setting
up EPT map. But the _mapcount < 0 check doesn't work for page cache THP
since every subpage of page cache THP would get _mapcount inc'ed once it
is PMD mapped, so PageTransCompoundMap() always returns false for page
cache THP. This would prevent KVM from setting up PMD mapped EPT entry.
So we need handle page cache THP correctly. However, when page cache
THP's PMD gets split, kernel just remove the map instead of setting up
PTE map like what anonymous THP does. Before KVM calls get_user_pages()
the subpages may get PTE mapped even though it is still a THP since the
page cache THP may be mapped by other processes at the mean time.
Checking its _mapcount and whether the THP has PTE mapped or not.
Although this may report some false negative cases (PTE mapped by other
processes), it looks not trivial to make this accurate.
With this fix /sys/kernel/debug/kvm/largepage would show reasonable
pages are PMD mapped by EPT as the below:
7fbeaee00000-7fbfaee00000 rw-s 00000000 00:14 275464 /dev/shm/qemu_back_mem.mem.SKUvat (deleted)
Size: 4194304 kB
[snip]
AnonHugePages: 0 kB
ShmemPmdMapped: 557056 kB
[snip]
Locked: 0 kB
cat /sys/kernel/debug/kvm/largepages
271
And the benchmarks are as same as anonymous THPs.
[yang.shi@linux.alibaba.com: v4]
Link: http://lkml.kernel.org/r/1571865575-42913-1-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1571769577-89735-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: dd78fedde4b9 ("rmap: support file thp")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Gang Deng <gavin.dg@linux.alibaba.com>
Tested-by: Gang Deng <gavin.dg@linux.alibaba.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/mm.h | 5 -----
include/linux/mm_types.h | 5 +++++
include/linux/page-flags.h | 20 ++++++++++++++++++--
3 files changed, 23 insertions(+), 7 deletions(-)
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -602,11 +602,6 @@ static inline void *kvcalloc(size_t n, s
extern void kvfree(const void *addr);
-static inline atomic_t *compound_mapcount_ptr(struct page *page)
-{
- return &page[1].compound_mapcount;
-}
-
static inline int compound_mapcount(struct page *page)
{
VM_BUG_ON_PAGE(!PageCompound(page), page);
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -226,6 +226,11 @@ struct page_frag_cache {
typedef unsigned long vm_flags_t;
+static inline atomic_t *compound_mapcount_ptr(struct page *page)
+{
+ return &page[1].compound_mapcount;
+}
+
/*
* A region containing a mapping of a non-memory backed file under NOMMU
* conditions. These are held in a global tree and are pinned by the VMAs that
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -577,12 +577,28 @@ static inline int PageTransCompound(stru
*
* Unlike PageTransCompound, this is safe to be called only while
* split_huge_pmd() cannot run from under us, like if protected by the
- * MMU notifier, otherwise it may result in page->_mapcount < 0 false
+ * MMU notifier, otherwise it may result in page->_mapcount check false
* positives.
+ *
+ * We have to treat page cache THP differently since every subpage of it
+ * would get _mapcount inc'ed once it is PMD mapped. But, it may be PTE
+ * mapped in the current process so comparing subpage's _mapcount to
+ * compound_mapcount to filter out PTE mapped case.
*/
static inline int PageTransCompoundMap(struct page *page)
{
- return PageTransCompound(page) && atomic_read(&page->_mapcount) < 0;
+ struct page *head;
+
+ if (!PageTransCompound(page))
+ return 0;
+
+ if (PageAnon(page))
+ return atomic_read(&page->_mapcount) < 0;
+
+ head = compound_head(page);
+ /* File THP is PMD mapped and not PTE mapped */
+ return atomic_read(&page->_mapcount) ==
+ atomic_read(compound_mapcount_ptr(head));
}
/*
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 022/125] mm, vmstat: hide /proc/pagetypeinfo from normal users
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (20 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 021/125] mm: thp: handle page cache THP correctly in PageTransCompoundMap Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 023/125] dump_stack: avoid the livelock of the dump_lock Greg Kroah-Hartman
` (106 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michal Hocko, Waiman Long,
Mel Gorman, Vlastimil Babka, Rafael Aquini, David Rientjes,
Andrew Morton, David Hildenbrand, Johannes Weiner,
Roman Gushchin, Konstantin Khlebnikov, Jann Horn, Song Liu,
Linus Torvalds
From: Michal Hocko <mhocko@suse.com>
commit abaed0112c1db08be15a784a2c5c8a8b3063cdd3 upstream.
/proc/pagetypeinfo is a debugging tool to examine internal page
allocator state wrt to fragmentation. It is not very useful for any
other use so normal users really do not need to read this file.
Waiman Long has noticed that reading this file can have negative side
effects because zone->lock is necessary for gathering data and that a)
interferes with the page allocator and its users and b) can lead to hard
lockups on large machines which have very long free_list.
Reduce both issues by simply not exporting the file to regular users.
Link: http://lkml.kernel.org/r/20191025072610.18526-2-mhocko@kernel.org
Fixes: 467c996c1e19 ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Waiman Long <longman@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Jann Horn <jannh@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/vmstat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -1972,7 +1972,7 @@ void __init init_mm_internals(void)
#endif
#ifdef CONFIG_PROC_FS
proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
- proc_create_seq("pagetypeinfo", 0444, NULL, &pagetypeinfo_op);
+ proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
proc_create_seq("vmstat", 0444, NULL, &vmstat_op);
proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
#endif
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 023/125] dump_stack: avoid the livelock of the dump_lock
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (21 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 022/125] mm, vmstat: hide /proc/pagetypeinfo from normal users Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 024/125] tools: gpio: Use !building_out_of_srctree to determine srctree Greg Kroah-Hartman
` (105 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kevin Hao, Linus Torvalds, Andrew Morton
From: Kevin Hao <haokexin@gmail.com>
commit 5cbf2fff3bba8d3c6a4d47c1754de1cf57e2b01f upstream.
In the current code, we use the atomic_cmpxchg() to serialize the output
of the dump_stack(), but this implementation suffers the thundering herd
problem. We have observed such kind of livelock on a Marvell cn96xx
board(24 cpus) when heavily using the dump_stack() in a kprobe handler.
Actually we can let the competitors to wait for the releasing of the
lock before jumping to atomic_cmpxchg(). This will definitely mitigate
the thundering herd problem. Thanks Linus for the suggestion.
[akpm@linux-foundation.org: fix comment]
Link: http://lkml.kernel.org/r/20191030031637.6025-1-haokexin@gmail.com
Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
lib/dump_stack.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/lib/dump_stack.c
+++ b/lib/dump_stack.c
@@ -106,7 +106,12 @@ retry:
was_locked = 1;
} else {
local_irq_restore(flags);
- cpu_relax();
+ /*
+ * Wait for the lock to release before jumping to
+ * atomic_cmpxchg() in order to mitigate the thundering herd
+ * problem.
+ */
+ do { cpu_relax(); } while (atomic_read(&dump_lock) != -1);
goto retry;
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 024/125] tools: gpio: Use !building_out_of_srctree to determine srctree
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (22 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 023/125] dump_stack: avoid the livelock of the dump_lock Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 025/125] perf tools: Fix time sorting Greg Kroah-Hartman
` (104 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Shuah Khan, Bartosz Golaszewski
From: Shuah Khan <skhan@linuxfoundation.org>
commit 4a6a6f5c4aeedb72db871d60bfcca89835f317aa upstream.
make TARGETS=gpio kselftest fails with:
Makefile:23: tools/build/Makefile.include: No such file or directory
When the gpio tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.
When the build in invoked from selftests/gpio Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.
Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=gpio kselftest" build failure.
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/gpio/Makefile | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/tools/gpio/Makefile
+++ b/tools/gpio/Makefile
@@ -3,7 +3,11 @@ include ../scripts/Makefile.include
bindir ?= /usr/bin
-ifeq ($(srctree),)
+# This will work when gpio is built in tools env. where srctree
+# isn't set and when invoked from selftests build, where srctree
+# is set to ".". building_out_of_srctree is undefined for in srctree
+# builds
+ifndef building_out_of_srctree
srctree := $(patsubst %/,%,$(dir $(CURDIR)))
srctree := $(patsubst %/,%,$(dir $(srctree)))
endif
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 025/125] perf tools: Fix time sorting
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (23 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 024/125] tools: gpio: Use !building_out_of_srctree to determine srctree Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 026/125] drm/radeon: fix si_enable_smc_cac() failed issue Greg Kroah-Hartman
` (103 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Olsa, Andi Kleen,
Alexander Shishkin, Michael Petlan, Namhyung Kim, Peter Zijlstra,
Arnaldo Carvalho de Melo
From: Jiri Olsa <jolsa@kernel.org>
commit 722ddfde366fd46205456a9c5ff9b3359dc9a75e upstream.
The final sort might get confused when the comparison is done over
bigger numbers than int like for -s time.
Check the following report for longer workloads:
$ perf report -s time -F time,overhead --stdio
Fix hist_entry__sort() to properly return int64_t and not possible cut
int.
Fixes: 043ca389a318 ("perf tools: Use hpp formats to sort final output")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org # v3.16+
Link: http://lore.kernel.org/lkml/20191104232711.16055-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/perf/util/hist.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -1508,7 +1508,7 @@ int hists__collapse_resort(struct hists
return 0;
}
-static int hist_entry__sort(struct hist_entry *a, struct hist_entry *b)
+static int64_t hist_entry__sort(struct hist_entry *a, struct hist_entry *b)
{
struct hists *hists = a->hists;
struct perf_hpp_fmt *fmt;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 026/125] drm/radeon: fix si_enable_smc_cac() failed issue
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (24 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 025/125] perf tools: Fix time sorting Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 027/125] HID: wacom: generic: Treat serial number and related fields as unsigned Greg Kroah-Hartman
` (102 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Yong Zhao, Alex Deucher
From: Alex Deucher <alexander.deucher@amd.com>
commit 2c409ba81be25516afe05ae27a4a15da01740b01 upstream.
Need to set the dte flag on this asic.
Port the fix from amdgpu:
5cb818b861be114 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue")
Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/radeon/si_dpm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -1956,6 +1956,7 @@ static void si_initialize_powertune_defa
case 0x682C:
si_pi->cac_weights = cac_weights_cape_verde_pro;
si_pi->dte_data = dte_data_sun_xt;
+ update_dte_from_pl2 = true;
break;
case 0x6825:
case 0x6827:
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 027/125] HID: wacom: generic: Treat serial number and related fields as unsigned
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (25 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 026/125] drm/radeon: fix si_enable_smc_cac() failed issue Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-13 10:47 ` Pavel Machek
2019-11-11 18:27 ` [PATCH 4.19 028/125] soundwire: depend on ACPI Greg Kroah-Hartman
` (101 subsequent siblings)
128 siblings, 1 reply; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Gerecke,
Aaron Armstrong Skomra, Jiri Kosina
From: Jason Gerecke <killertofu@gmail.com>
commit ff479731c3859609530416a18ddb3db5db019b66 upstream.
The HID descriptors for most Wacom devices oddly declare the serial
number and other related fields as signed integers. When these numbers
are ingested by the HID subsystem, they are automatically sign-extended
into 32-bit integers. We treat the fields as unsigned elsewhere in the
kernel and userspace, however, so this sign-extension causes problems.
In particular, the sign-extended tool ID sent to userspace as ABS_MISC
does not properly match unsigned IDs used by xf86-input-wacom and libwacom.
We introduce a function 'wacom_s32tou' that can undo the automatic sign
extension performed by 'hid_snto32'. We call this function when processing
the serial number and related fields to ensure that we are dealing with
and reporting the unsigned form. We opt to use this method rather than
adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be
more robust in the face of future devices.
Ref: https://github.com/linuxwacom/input-wacom/issues/134
Fixes: f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/wacom.h | 15 +++++++++++++++
drivers/hid/wacom_wac.c | 10 ++++++----
2 files changed, 21 insertions(+), 4 deletions(-)
--- a/drivers/hid/wacom.h
+++ b/drivers/hid/wacom.h
@@ -205,6 +205,21 @@ static inline void wacom_schedule_work(s
}
}
+/*
+ * Convert a signed 32-bit integer to an unsigned n-bit integer. Undoes
+ * the normally-helpful work of 'hid_snto32' for fields that use signed
+ * ranges for questionable reasons.
+ */
+static inline __u32 wacom_s32tou(s32 value, __u8 n)
+{
+ switch (n) {
+ case 8: return ((__u8)value);
+ case 16: return ((__u16)value);
+ case 32: return ((__u32)value);
+ }
+ return value & (1 << (n - 1)) ? value & (~(~0U << n)) : value;
+}
+
extern const struct hid_device_id wacom_ids[];
void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2271,7 +2271,7 @@ static void wacom_wac_pen_event(struct h
case HID_DG_TOOLSERIALNUMBER:
if (value) {
wacom_wac->serial[0] = (wacom_wac->serial[0] & ~0xFFFFFFFFULL);
- wacom_wac->serial[0] |= (__u32)value;
+ wacom_wac->serial[0] |= wacom_s32tou(value, field->report_size);
}
return;
case HID_DG_TWIST:
@@ -2287,15 +2287,17 @@ static void wacom_wac_pen_event(struct h
return;
case WACOM_HID_WD_SERIALHI:
if (value) {
+ __u32 raw_value = wacom_s32tou(value, field->report_size);
+
wacom_wac->serial[0] = (wacom_wac->serial[0] & 0xFFFFFFFF);
- wacom_wac->serial[0] |= ((__u64)value) << 32;
+ wacom_wac->serial[0] |= ((__u64)raw_value) << 32;
/*
* Non-USI EMR devices may contain additional tool type
* information here. See WACOM_HID_WD_TOOLTYPE case for
* more details.
*/
if (value >> 20 == 1) {
- wacom_wac->id[0] |= value & 0xFFFFF;
+ wacom_wac->id[0] |= raw_value & 0xFFFFF;
}
}
return;
@@ -2307,7 +2309,7 @@ static void wacom_wac_pen_event(struct h
* bitwise OR so the complete value can be built
* up over time :(
*/
- wacom_wac->id[0] |= value;
+ wacom_wac->id[0] |= wacom_s32tou(value, field->report_size);
return;
case WACOM_HID_WD_OFFSETLEFT:
if (features->offset_left && value != features->offset_left)
^ permalink raw reply [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 027/125] HID: wacom: generic: Treat serial number and related fields as unsigned
2019-11-11 18:27 ` [PATCH 4.19 027/125] HID: wacom: generic: Treat serial number and related fields as unsigned Greg Kroah-Hartman
@ 2019-11-13 10:47 ` Pavel Machek
2019-11-13 11:02 ` Jiri Kosina
0 siblings, 1 reply; 145+ messages in thread
From: Pavel Machek @ 2019-11-13 10:47 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Jason Gerecke, Aaron Armstrong Skomra, Jiri Kosina
[-- Attachment #1: Type: text/plain, Size: 1978 bytes --]
Hi!
> From: Jason Gerecke <killertofu@gmail.com>
>
> commit ff479731c3859609530416a18ddb3db5db019b66 upstream.
>
> The HID descriptors for most Wacom devices oddly declare the serial
> number and other related fields as signed integers. When these numbers
> are ingested by the HID subsystem, they are automatically sign-extended
> into 32-bit integers. We treat the fields as unsigned elsewhere in the
> kernel and userspace, however, so this sign-extension causes problems.
> In particular, the sign-extended tool ID sent to userspace as ABS_MISC
> does not properly match unsigned IDs used by xf86-input-wacom and libwacom.
>
> We introduce a function 'wacom_s32tou' that can undo the automatic sign
> extension performed by 'hid_snto32'. We call this function when processing
> the serial number and related fields to ensure that we are dealing with
> and reporting the unsigned form. We opt to use this method rather than
> adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be
> more robust in the face of future devices.
> +++ b/drivers/hid/wacom.h
> @@ -205,6 +205,21 @@ static inline void wacom_schedule_work(s
> }
> }
>
> +/*
> + * Convert a signed 32-bit integer to an unsigned n-bit integer. Undoes
> + * the normally-helpful work of 'hid_snto32' for fields that use signed
> + * ranges for questionable reasons.
> + */
> +static inline __u32 wacom_s32tou(s32 value, __u8 n)
> +{
> + switch (n) {
> + case 8: return ((__u8)value);
> + case 16: return ((__u16)value);
> + case 32: return ((__u32)value);
> + }
> + return value & (1 << (n - 1)) ? value & (~(~0U << n)) : value;
> +}
Can we do something like:
BUG_ON(n>32);
if (n==32) return ((__u32)value);
return value & ((1 << n) - 1);
instead?
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 027/125] HID: wacom: generic: Treat serial number and related fields as unsigned
2019-11-13 10:47 ` Pavel Machek
@ 2019-11-13 11:02 ` Jiri Kosina
2019-11-13 15:43 ` Gerecke, Jason
0 siblings, 1 reply; 145+ messages in thread
From: Jiri Kosina @ 2019-11-13 11:02 UTC (permalink / raw)
To: Pavel Machek
Cc: Greg Kroah-Hartman, linux-kernel, stable, Jason Gerecke,
Aaron Armstrong Skomra
On Wed, 13 Nov 2019, Pavel Machek wrote:
> > From: Jason Gerecke <killertofu@gmail.com>
> >
> > commit ff479731c3859609530416a18ddb3db5db019b66 upstream.
> >
> > The HID descriptors for most Wacom devices oddly declare the serial
> > number and other related fields as signed integers. When these numbers
> > are ingested by the HID subsystem, they are automatically sign-extended
> > into 32-bit integers. We treat the fields as unsigned elsewhere in the
> > kernel and userspace, however, so this sign-extension causes problems.
> > In particular, the sign-extended tool ID sent to userspace as ABS_MISC
> > does not properly match unsigned IDs used by xf86-input-wacom and libwacom.
> >
> > We introduce a function 'wacom_s32tou' that can undo the automatic sign
> > extension performed by 'hid_snto32'. We call this function when processing
> > the serial number and related fields to ensure that we are dealing with
> > and reporting the unsigned form. We opt to use this method rather than
> > adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be
> > more robust in the face of future devices.
>
> > +++ b/drivers/hid/wacom.h
> > @@ -205,6 +205,21 @@ static inline void wacom_schedule_work(s
> > }
> > }
> >
> > +/*
> > + * Convert a signed 32-bit integer to an unsigned n-bit integer. Undoes
> > + * the normally-helpful work of 'hid_snto32' for fields that use signed
> > + * ranges for questionable reasons.
> > + */
> > +static inline __u32 wacom_s32tou(s32 value, __u8 n)
> > +{
> > + switch (n) {
> > + case 8: return ((__u8)value);
> > + case 16: return ((__u16)value);
> > + case 32: return ((__u32)value);
> > + }
> > + return value & (1 << (n - 1)) ? value & (~(~0U << n)) : value;
> > +}
>
> Can we do something like:
>
> BUG_ON(n>32);
Please no BUG_ON()s in bitop helpers.
Thanks,
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 027/125] HID: wacom: generic: Treat serial number and related fields as unsigned
2019-11-13 11:02 ` Jiri Kosina
@ 2019-11-13 15:43 ` Gerecke, Jason
0 siblings, 0 replies; 145+ messages in thread
From: Gerecke, Jason @ 2019-11-13 15:43 UTC (permalink / raw)
To: Pavel Machek
Cc: Greg Kroah-Hartman, linux-kernel, stable, Skomra, Aaron, Jiri Kosina
> From: Jiri Kosina <jikos@kernel.org>
> Sent: Wednesday, November 13, 2019 3:02 AM
> To: Pavel Machek <pavel@denx.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; stable@vger.kernel.org <stable@vger.kernel.org>; Gerecke, Jason <Jason.Gerecke@wacom.com>; Skomra, Aaron <Aaron.Skomra@wacom.com>
> Subject: Re: [PATCH 4.19 027/125] HID: wacom: generic: Treat serial number and related fields as unsigned
>
>
> [EXTERNAL]
>
> On Wed, 13 Nov 2019, Pavel Machek wrote:
>
> > > From: Jason Gerecke <killertofu@gmail.com>
> > >
> > > commit ff479731c3859609530416a18ddb3db5db019b66 upstream.
> > >
> > > The HID descriptors for most Wacom devices oddly declare the serial
> > > number and other related fields as signed integers. When these numbers
> > > are ingested by the HID subsystem, they are automatically sign-extended
> > > into 32-bit integers. We treat the fields as unsigned elsewhere in the
> > > kernel and userspace, however, so this sign-extension causes problems.
> > > In particular, the sign-extended tool ID sent to userspace as ABS_MISC
> > > does not properly match unsigned IDs used by xf86-input-wacom and libwacom.
> > >
> > > We introduce a function 'wacom_s32tou' that can undo the automatic sign
> > > extension performed by 'hid_snto32'. We call this function when processing
> > > the serial number and related fields to ensure that we are dealing with
> > > and reporting the unsigned form. We opt to use this method rather than
> > > adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be
> > > more robust in the face of future devices.
> >
> > > +++ b/drivers/hid/wacom.h
> > > @@ -205,6 +205,21 @@ static inline void wacom_schedule_work(s
> > > }
> > > }
> > >
> > > +/*
> > > + * Convert a signed 32-bit integer to an unsigned n-bit integer. Undoes
> > > + * the normally-helpful work of 'hid_snto32' for fields that use signed
> > > + * ranges for questionable reasons.
> > > + */
> > > +static inline __u32 wacom_s32tou(s32 value, __u8 n)
> > > +{
> > > + switch (n) {
> > > + case 8: return ((__u8)value);
> > > + case 16: return ((__u16)value);
> > > + case 32: return ((__u32)value);
> > > + }
> > > + return value & (1 << (n - 1)) ? value & (~(~0U << n)) : value;
> > > +}
> >
> > Can we do something like:
> >
The implementation here was copied from 'hid_snto32' (except, of course,
to make it convert signed to unsigned). That function provides
justification for how it is written, but if changes make sense then
we should probably do them to both this and 'hid_snto32'.
Jason
> > BUG_ON(n>32);
>
> Please no BUG_ON()s in bitop helpers.
>
> Thanks,
>
> --
> Jiri Kosina
> SUSE Labs
>
^ permalink raw reply [flat|nested] 145+ messages in thread
* [PATCH 4.19 028/125] soundwire: depend on ACPI
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (26 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 027/125] HID: wacom: generic: Treat serial number and related fields as unsigned Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 029/125] soundwire: bus: set initial value to port_status Greg Kroah-Hartman
` (100 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Michal Suchanek, Vinod Koul
From: Michal Suchanek <msuchanek@suse.de>
commit 52eb063d153ac310058fbaa91577a72c0e7a7169 upstream.
The device cannot be probed on !ACPI and gives this warning:
drivers/soundwire/slave.c:16:12: warning: ‘sdw_slave_add’ defined but
not used [-Wunused-function]
static int sdw_slave_add(struct sdw_bus *bus,
^~~~~~~~~~~~~
Cc: stable@vger.kernel.org
Fixes: 7c3cd189b86d ("soundwire: Add Master registration")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/bd685232ea511251eeb9554172f1524eabf9a46e.1570097621.git.msuchanek@suse.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/soundwire/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/soundwire/Kconfig
+++ b/drivers/soundwire/Kconfig
@@ -4,6 +4,7 @@
menuconfig SOUNDWIRE
tristate "SoundWire support"
+ depends on ACPI
help
SoundWire is a 2-Pin interface with data and clock line ratified
by the MIPI Alliance. SoundWire is used for transporting data
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 029/125] soundwire: bus: set initial value to port_status
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (27 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 028/125] soundwire: depend on ACPI Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 030/125] arm64: Do not mask out PTE_RDONLY in pte_same() Greg Kroah-Hartman
` (99 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Bard Liao, Pierre-Louis Bossart, Vinod Koul
From: Bard Liao <yung-chuan.liao@linux.intel.com>
commit f1fac63af678b2fc1044ca71fedf1f2ae8bf7c3b upstream.
port_status[port_num] are assigned for each port_num in some if
conditions. So some of the port_status may not be initialized.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190829181135.16049-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/soundwire/bus.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -805,7 +805,7 @@ static int sdw_handle_port_interrupt(str
static int sdw_handle_slave_alerts(struct sdw_slave *slave)
{
struct sdw_slave_intr_status slave_intr;
- u8 clear = 0, bit, port_status[15];
+ u8 clear = 0, bit, port_status[15] = {0};
int port_num, stat, ret, count = 0;
unsigned long port;
bool slave_notify = false;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 030/125] arm64: Do not mask out PTE_RDONLY in pte_same()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (28 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 029/125] soundwire: bus: set initial value to port_status Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 031/125] ceph: fix use-after-free in __ceph_remove_cap() Greg Kroah-Hartman
` (98 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Will Deacon, Steve Capper,
John Stultz, Catalin Marinas
From: Catalin Marinas <catalin.marinas@arm.com>
commit 6767df245f4736d0cf0c6fb7cf9cf94b27414245 upstream.
Following commit 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out
of set_pte_at()"), the PTE_RDONLY bit is no longer managed by
set_pte_at() but built into the PAGE_* attribute definitions.
Consequently, pte_same() must include this bit when checking two PTEs
for equality.
Remove the arm64-specific pte_same() function, practically reverting
commit 747a70e60b72 ("arm64: Fix copy-on-write referencing in HugeTLB")
Fixes: 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Will Deacon <will@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/include/asm/pgtable.h | 17 -----------------
1 file changed, 17 deletions(-)
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -274,23 +274,6 @@ static inline void set_pte_at(struct mm_
set_pte(ptep, pte);
}
-#define __HAVE_ARCH_PTE_SAME
-static inline int pte_same(pte_t pte_a, pte_t pte_b)
-{
- pteval_t lhs, rhs;
-
- lhs = pte_val(pte_a);
- rhs = pte_val(pte_b);
-
- if (pte_present(pte_a))
- lhs &= ~PTE_RDONLY;
-
- if (pte_present(pte_b))
- rhs &= ~PTE_RDONLY;
-
- return (lhs == rhs);
-}
-
/*
* Huge pte definitions.
*/
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 031/125] ceph: fix use-after-free in __ceph_remove_cap()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (29 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 030/125] arm64: Do not mask out PTE_RDONLY in pte_same() Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 032/125] ceph: add missing check in d_revalidate snapdir handling Greg Kroah-Hartman
` (97 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Luis Henriques, Jeff Layton, Ilya Dryomov
From: Luis Henriques <lhenriques@suse.com>
commit ea60ed6fcf29eebc78f2ce91491e6309ee005a01 upstream.
KASAN reports a use-after-free when running xfstest generic/531, with the
following trace:
[ 293.903362] kasan_report+0xe/0x20
[ 293.903365] rb_erase+0x1f/0x790
[ 293.903370] __ceph_remove_cap+0x201/0x370
[ 293.903375] __ceph_remove_caps+0x4b/0x70
[ 293.903380] ceph_evict_inode+0x4e/0x360
[ 293.903386] evict+0x169/0x290
[ 293.903390] __dentry_kill+0x16f/0x250
[ 293.903394] dput+0x1c6/0x440
[ 293.903398] __fput+0x184/0x330
[ 293.903404] task_work_run+0xb9/0xe0
[ 293.903410] exit_to_usermode_loop+0xd3/0xe0
[ 293.903413] do_syscall_64+0x1a0/0x1c0
[ 293.903417] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happens because __ceph_remove_cap() may queue a cap release
(__ceph_queue_cap_release) which can be scheduled before that cap is
removed from the inode list with
rb_erase(&cap->ci_node, &ci->i_caps);
And, when this finally happens, the use-after-free will occur.
This can be fixed by removing the cap from the inode list before being
removed from the session list, and thus eliminating the risk of an UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ceph/caps.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1053,6 +1053,11 @@ void __ceph_remove_cap(struct ceph_cap *
dout("__ceph_remove_cap %p from %p\n", cap, &ci->vfs_inode);
+ /* remove from inode's cap rbtree, and clear auth cap */
+ rb_erase(&cap->ci_node, &ci->i_caps);
+ if (ci->i_auth_cap == cap)
+ ci->i_auth_cap = NULL;
+
/* remove from session list */
spin_lock(&session->s_cap_lock);
if (session->s_cap_iterator == cap) {
@@ -1088,11 +1093,6 @@ void __ceph_remove_cap(struct ceph_cap *
spin_unlock(&session->s_cap_lock);
- /* remove from inode list */
- rb_erase(&cap->ci_node, &ci->i_caps);
- if (ci->i_auth_cap == cap)
- ci->i_auth_cap = NULL;
-
if (removed)
ceph_put_cap(mdsc, cap);
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 032/125] ceph: add missing check in d_revalidate snapdir handling
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (30 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 031/125] ceph: fix use-after-free in __ceph_remove_cap() Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 033/125] iio: adc: stm32-adc: fix stopping dma Greg Kroah-Hartman
` (96 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Al Viro, Jeff Layton, Ilya Dryomov
From: Al Viro <viro@zeniv.linux.org.uk>
commit 1f08529c84cfecaf1261ed9b7e17fab18541c58f upstream.
We should not play with dcache without parent locked...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ceph/inode.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1399,6 +1399,7 @@ retry_lookup:
dout(" final dn %p\n", dn);
} else if ((req->r_op == CEPH_MDS_OP_LOOKUPSNAP ||
req->r_op == CEPH_MDS_OP_MKSNAP) &&
+ test_bit(CEPH_MDS_R_PARENT_LOCKED, &req->r_req_flags) &&
!test_bit(CEPH_MDS_R_ABORTED, &req->r_req_flags)) {
struct dentry *dn = req->r_dentry;
struct inode *dir = req->r_parent;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 033/125] iio: adc: stm32-adc: fix stopping dma
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (31 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 032/125] ceph: add missing check in d_revalidate snapdir handling Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 034/125] iio: imu: adis16480: make sure provided frequency is positive Greg Kroah-Hartman
` (95 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fabrice Gasnier, Stable, Jonathan Cameron
From: Fabrice Gasnier <fabrice.gasnier@st.com>
commit e6afcf6c598d6f3a0c9c408bfeddb3f5730608b0 upstream.
There maybe a race when using dmaengine_terminate_all(). The predisable
routine may call iio_triggered_buffer_predisable() prior to a pending DMA
callback.
Adopt dmaengine_terminate_sync() to ensure there's no pending DMA request
before calling iio_triggered_buffer_predisable().
Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/stm32-adc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1340,7 +1340,7 @@ static int stm32_adc_dma_start(struct ii
cookie = dmaengine_submit(desc);
ret = dma_submit_error(cookie);
if (ret) {
- dmaengine_terminate_all(adc->dma_chan);
+ dmaengine_terminate_sync(adc->dma_chan);
return ret;
}
@@ -1413,7 +1413,7 @@ static int stm32_adc_buffer_predisable(s
dev_err(&indio_dev->dev, "predisable failed\n");
if (adc->dma_chan)
- dmaengine_terminate_all(adc->dma_chan);
+ dmaengine_terminate_sync(adc->dma_chan);
if (stm32_adc_set_trig(indio_dev, NULL))
dev_err(&indio_dev->dev, "Can't clear trigger\n");
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 034/125] iio: imu: adis16480: make sure provided frequency is positive
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (32 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 033/125] iio: adc: stm32-adc: fix stopping dma Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 035/125] iio: srf04: fix wrong limitation in distance measuring Greg Kroah-Hartman
` (94 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexandru Ardelean, Stable, Jonathan Cameron
From: Alexandru Ardelean <alexandru.ardelean@analog.com>
commit 24e1eb5c0d78cfb9750b690bbe997d4d59170258 upstream.
It could happen that either `val` or `val2` [provided from userspace] is
negative. In that case the computed frequency could get a weird value.
Fix this by checking that neither of the 2 variables is negative, and check
that the computed result is not-zero.
Fixes: e4f959390178 ("iio: imu: adis16480 switch sampling frequency attr to core support")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/adis16480.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -270,8 +270,11 @@ static int adis16480_set_freq(struct iio
struct adis16480 *st = iio_priv(indio_dev);
unsigned int t;
+ if (val < 0 || val2 < 0)
+ return -EINVAL;
+
t = val * 1000 + val2 / 1000;
- if (t <= 0)
+ if (t == 0)
return -EINVAL;
t = 2460000 / t;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 035/125] iio: srf04: fix wrong limitation in distance measuring
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (33 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 034/125] iio: imu: adis16480: make sure provided frequency is positive Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 036/125] ARM: sunxi: Fix CPU powerdown on A83T Greg Kroah-Hartman
` (93 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zbyněk Kocur, Andreas Klinger,
Stable, Jonathan Cameron
From: Andreas Klinger <ak@it-klinger.de>
commit 431f7667bd6889a274913162dfd19cce9d84848e upstream.
The measured time value in the driver is limited to the maximum distance
which can be read by the sensor. This limitation was wrong and is fixed
by this patch.
It also takes into account that we are supporting a variety of sensors
today and that the recently added sensors have a higher maximum
distance range.
Changes in v2:
- Added a Tested-by
Suggested-by: Zbyněk Kocur <zbynek.kocur@fel.cvut.cz>
Tested-by: Zbyněk Kocur <zbynek.kocur@fel.cvut.cz>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Cc:<Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/proximity/srf04.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)
--- a/drivers/iio/proximity/srf04.c
+++ b/drivers/iio/proximity/srf04.c
@@ -105,7 +105,7 @@ static int srf04_read(struct srf04_data
udelay(10);
gpiod_set_value(data->gpiod_trig, 0);
- /* it cannot take more than 20 ms */
+ /* it should not take more than 20 ms until echo is rising */
ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
if (ret < 0) {
mutex_unlock(&data->lock);
@@ -115,7 +115,8 @@ static int srf04_read(struct srf04_data
return -ETIMEDOUT;
}
- ret = wait_for_completion_killable_timeout(&data->falling, HZ/50);
+ /* it cannot take more than 50 ms until echo is falling */
+ ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
if (ret < 0) {
mutex_unlock(&data->lock);
return ret;
@@ -130,19 +131,19 @@ static int srf04_read(struct srf04_data
dt_ns = ktime_to_ns(ktime_dt);
/*
- * measuring more than 3 meters is beyond the capabilities of
- * the sensor
+ * measuring more than 6,45 meters is beyond the capabilities of
+ * the supported sensors
* ==> filter out invalid results for not measuring echos of
* another us sensor
*
* formula:
- * distance 3 m
- * time = ---------- = --------- = 9404389 ns
- * speed 319 m/s
+ * distance 6,45 * 2 m
+ * time = ---------- = ------------ = 40438871 ns
+ * speed 319 m/s
*
* using a minimum speed at -20 °C of 319 m/s
*/
- if (dt_ns > 9404389)
+ if (dt_ns > 40438871)
return -EIO;
time_ns = dt_ns;
@@ -154,20 +155,20 @@ static int srf04_read(struct srf04_data
* with Temp in °C
* and speed in m/s
*
- * use 343 m/s as ultrasonic speed at 20 °C here in absence of the
+ * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
* temperature
*
* therefore:
- * time 343
- * distance = ------ * -----
- * 10^6 2
+ * time 343,5 time * 106
+ * distance = ------ * ------- = ------------
+ * 10^6 2 617176
* with time in ns
* and distance in mm (one way)
*
- * because we limit to 3 meters the multiplication with 343 just
+ * because we limit to 6,45 meters the multiplication with 106 just
* fits into 32 bit
*/
- distance_mm = time_ns * 343 / 2000000;
+ distance_mm = time_ns * 106 / 617176;
return distance_mm;
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 036/125] ARM: sunxi: Fix CPU powerdown on A83T
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (34 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 035/125] iio: srf04: fix wrong limitation in distance measuring Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 037/125] netfilter: nf_tables: Align nft_expr private data to 64-bit Greg Kroah-Hartman
` (92 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ondrej Jirman, Chen-Yu Tsai, Maxime Ripard
From: Ondrej Jirman <megous@megous.com>
commit e690053e97e7a9c968df9a97cef9089dfa8e6a44 upstream.
PRCM_PWROFF_GATING_REG has CPU0 at bit 4 on A83T. So without this
patch, instead of gating the CPU0, the whole cluster was power gated,
when shutting down first CPU in the cluster.
Fixes: 6961275e72a8c1 ("ARM: sun8i: smp: Add support for A83T")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@vger.kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/mach-sunxi/mc_smp.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm/mach-sunxi/mc_smp.c
+++ b/arch/arm/mach-sunxi/mc_smp.c
@@ -478,14 +478,18 @@ static void sunxi_mc_smp_cpu_die(unsigne
static int sunxi_cpu_powerdown(unsigned int cpu, unsigned int cluster)
{
u32 reg;
+ int gating_bit = cpu;
pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS)
return -EINVAL;
+ if (is_a83t && cpu == 0)
+ gating_bit = 4;
+
/* gate processor power */
reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
- reg |= PRCM_PWROFF_GATING_REG_CORE(cpu);
+ reg |= PRCM_PWROFF_GATING_REG_CORE(gating_bit);
writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
udelay(20);
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 037/125] netfilter: nf_tables: Align nft_expr private data to 64-bit
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (35 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 036/125] ARM: sunxi: Fix CPU powerdown on A83T Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 038/125] netfilter: ipset: Fix an error code in ip_set_sockfn_get() Greg Kroah-Hartman
` (91 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Lukas Wunner, Pablo Neira Ayuso
From: Lukas Wunner <lukas@wunner.de>
commit 250367c59e6ba0d79d702a059712d66edacd4a1a upstream.
Invoking the following commands on a 32-bit architecture with strict
alignment requirements (such as an ARMv7-based Raspberry Pi) results
in an alignment exception:
# nft add table ip test-ip4
# nft add chain ip test-ip4 output { type filter hook output priority 0; }
# nft add rule ip test-ip4 output quota 1025 bytes
Alignment trap: not handling instruction e1b26f9f at [<7f4473f8>]
Unhandled fault: alignment exception (0x001) at 0xb832e824
Internal error: : 1 [#1] PREEMPT SMP ARM
Hardware name: BCM2835
[<7f4473fc>] (nft_quota_do_init [nft_quota])
[<7f447448>] (nft_quota_init [nft_quota])
[<7f4260d0>] (nf_tables_newrule [nf_tables])
[<7f4168dc>] (nfnetlink_rcv_batch [nfnetlink])
[<7f416bd0>] (nfnetlink_rcv [nfnetlink])
[<8078b334>] (netlink_unicast)
[<8078b664>] (netlink_sendmsg)
[<8071b47c>] (sock_sendmsg)
[<8071bd18>] (___sys_sendmsg)
[<8071ce3c>] (__sys_sendmsg)
[<8071ce94>] (sys_sendmsg)
The reason is that nft_quota_do_init() calls atomic64_set() on an
atomic64_t which is only aligned to 32-bit, not 64-bit, because it
succeeds struct nft_expr in memory which only contains a 32-bit pointer.
Fix by aligning the nft_expr private data to 64-bit.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/netfilter/nf_tables.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -793,7 +793,8 @@ struct nft_expr_ops {
*/
struct nft_expr {
const struct nft_expr_ops *ops;
- unsigned char data[];
+ unsigned char data[]
+ __attribute__((aligned(__alignof__(u64))));
};
static inline void *nft_expr_priv(const struct nft_expr *expr)
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 038/125] netfilter: ipset: Fix an error code in ip_set_sockfn_get()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (36 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 037/125] netfilter: nf_tables: Align nft_expr private data to 64-bit Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 039/125] intel_th: pci: Add Comet Lake PCH support Greg Kroah-Hartman
` (90 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Jozsef Kadlecsik
From: Dan Carpenter <dan.carpenter@oracle.com>
commit 30b7244d79651460ff114ba8f7987ed94c86b99a upstream.
The copy_to_user() function returns the number of bytes remaining to be
copied. In this code, that positive return is checked at the end of the
function and we return zero/success. What we should do instead is
return -EFAULT.
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netfilter/ipset/ip_set_core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -1977,8 +1977,9 @@ ip_set_sockfn_get(struct sock *sk, int o
}
req_version->version = IPSET_PROTOCOL;
- ret = copy_to_user(user, req_version,
- sizeof(struct ip_set_req_version));
+ if (copy_to_user(user, req_version,
+ sizeof(struct ip_set_req_version)))
+ ret = -EFAULT;
goto done;
}
case IP_SET_OP_GET_BYNAME: {
@@ -2035,7 +2036,8 @@ ip_set_sockfn_get(struct sock *sk, int o
} /* end of switch(op) */
copy:
- ret = copy_to_user(user, data, copylen);
+ if (copy_to_user(user, data, copylen))
+ ret = -EFAULT;
done:
vfree(data);
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 039/125] intel_th: pci: Add Comet Lake PCH support
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (37 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 038/125] netfilter: ipset: Fix an error code in ip_set_sockfn_get() Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:27 ` [PATCH 4.19 040/125] intel_th: pci: Add Jasper " Greg Kroah-Hartman
` (89 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Shishkin, Andy Shevchenko
From: Alexander Shishkin <alexander.shishkin@linux.intel.com>
commit 3adbb5718dd5264666ddbc2b9b43799d292e9cb6 upstream.
This adds support for Intel TH on Comet Lake PCH.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191028070651.9770-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hwtracing/intel_th/pci.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/hwtracing/intel_th/pci.c
+++ b/drivers/hwtracing/intel_th/pci.c
@@ -176,6 +176,11 @@ static const struct pci_device_id intel_
.driver_data = (kernel_ulong_t)&intel_th_2x,
},
{
+ /* Comet Lake PCH */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x06a6),
+ .driver_data = (kernel_ulong_t)&intel_th_2x,
+ },
+ {
/* Ice Lake NNPI */
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x45c5),
.driver_data = (kernel_ulong_t)&intel_th_2x,
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 040/125] intel_th: pci: Add Jasper Lake PCH support
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (38 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 039/125] intel_th: pci: Add Comet Lake PCH support Greg Kroah-Hartman
@ 2019-11-11 18:27 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 041/125] x86/apic/32: Avoid bogus LDR warnings Greg Kroah-Hartman
` (88 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:27 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Shishkin, Andy Shevchenko
From: Alexander Shishkin <alexander.shishkin@linux.intel.com>
commit 9d55499d8da49e9261e95a490f3fda41d955f505 upstream.
This adds support for Intel TH on Jasper Lake PCH.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191028070651.9770-8-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hwtracing/intel_th/pci.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/hwtracing/intel_th/pci.c
+++ b/drivers/hwtracing/intel_th/pci.c
@@ -190,6 +190,11 @@ static const struct pci_device_id intel_
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa0a6),
.driver_data = (kernel_ulong_t)&intel_th_2x,
},
+ {
+ /* Jasper Lake PCH */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4da6),
+ .driver_data = (kernel_ulong_t)&intel_th_2x,
+ },
{ 0 },
};
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 041/125] x86/apic/32: Avoid bogus LDR warnings
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (39 preceding siblings ...)
2019-11-11 18:27 ` [PATCH 4.19 040/125] intel_th: pci: Add Jasper " Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 042/125] SMB3: Fix persistent handles reconnect Greg Kroah-Hartman
` (87 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jan Beulich, Thomas Gleixner
From: Jan Beulich <jbeulich@suse.com>
commit fe6f85ca121e9c74e7490fe66b0c5aae38e332c3 upstream.
The removal of the LDR initialization in the bigsmp_32 APIC code unearthed
a problem in setup_local_APIC().
The code checks unconditionally for a mismatch of the logical APIC id by
comparing the early APIC id which was initialized in get_smp_config() with
the actual LDR value in the APIC.
Due to the removal of the bogus LDR initialization the check now can
trigger on bigsmp_32 APIC systems emitting a warning for every booting
CPU. This is of course a false positive because the APIC is not using
logical destination mode.
Restrict the check and the possibly resulting fixup to systems which are
actually using the APIC in logical destination mode.
[ tglx: Massaged changelog and added Cc stable ]
Fixes: bae3a8d3308 ("x86/apic: Do not initialize LDR and DFR for bigsmp")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/666d8f91-b5a8-1afd-7add-821e72a35f03@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/apic/apic.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1528,9 +1528,6 @@ static void setup_local_APIC(void)
{
int cpu = smp_processor_id();
unsigned int value;
-#ifdef CONFIG_X86_32
- int logical_apicid, ldr_apicid;
-#endif
if (disable_apic) {
@@ -1571,16 +1568,21 @@ static void setup_local_APIC(void)
apic->init_apic_ldr();
#ifdef CONFIG_X86_32
- /*
- * APIC LDR is initialized. If logical_apicid mapping was
- * initialized during get_smp_config(), make sure it matches the
- * actual value.
- */
- logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
- ldr_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
- WARN_ON(logical_apicid != BAD_APICID && logical_apicid != ldr_apicid);
- /* always use the value from LDR */
- early_per_cpu(x86_cpu_to_logical_apicid, cpu) = ldr_apicid;
+ if (apic->dest_logical) {
+ int logical_apicid, ldr_apicid;
+
+ /*
+ * APIC LDR is initialized. If logical_apicid mapping was
+ * initialized during get_smp_config(), make sure it matches
+ * the actual value.
+ */
+ logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
+ ldr_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
+ if (logical_apicid != BAD_APICID)
+ WARN_ON(logical_apicid != ldr_apicid);
+ /* Always use the value from LDR. */
+ early_per_cpu(x86_cpu_to_logical_apicid, cpu) = ldr_apicid;
+ }
#endif
/*
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 042/125] SMB3: Fix persistent handles reconnect
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (40 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 041/125] x86/apic/32: Avoid bogus LDR warnings Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 043/125] can: usb_8dev: fix use-after-free on disconnect Greg Kroah-Hartman
` (86 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pavel Shilovsky, Steve French
From: Pavel Shilovsky <pshilov@microsoft.com>
commit d243af7ab9feb49f11f2c0050d2077e2d9556f9b upstream.
When the client hits a network reconnect, it re-opens every open
file with a create context to reconnect a persistent handle. All
create context types should be 8-bytes aligned but the padding
was missed for that one. As a result, some servers don't allow
us to reconnect handles and return an error. The problem occurs
when the problematic context is not at the end of the create
request packet. Fix this by adding a proper padding at the end
of the reconnect persistent handle context.
Cc: Stable <stable@vger.kernel.org> # 4.19.x
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/smb2pdu.h | 1 +
1 file changed, 1 insertion(+)
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -777,6 +777,7 @@ struct create_durable_handle_reconnect_v
struct create_context ccontext;
__u8 Name[8];
struct durable_reconnect_context_v2 dcontext;
+ __u8 Pad[4];
} __packed;
/* See MS-SMB2 2.2.13.2.5 */
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 043/125] can: usb_8dev: fix use-after-free on disconnect
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (41 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 042/125] SMB3: Fix persistent handles reconnect Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 044/125] can: flexcan: disable completely the ECC mechanism Greg Kroah-Hartman
` (85 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Bernd Krumboeck, Wolfgang Grandegger,
Johan Hovold, Marc Kleine-Budde
From: Johan Hovold <johan@kernel.org>
commit 3759739426186a924675651b388d1c3963c5710e upstream.
The driver was accessing its driver data after having freed it.
Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Cc: stable <stable@vger.kernel.org> # 3.9
Cc: Bernd Krumboeck <b.krumboeck@gmail.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/usb/usb_8dev.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -1007,9 +1007,8 @@ static void usb_8dev_disconnect(struct u
netdev_info(priv->netdev, "device disconnected\n");
unregister_netdev(priv->netdev);
- free_candev(priv->netdev);
-
unlink_all_urbs(priv);
+ free_candev(priv->netdev);
}
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 044/125] can: flexcan: disable completely the ECC mechanism
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (42 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 043/125] can: usb_8dev: fix use-after-free on disconnect Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 045/125] can: c_can: c_can_poll(): only read status register after status IRQ Greg Kroah-Hartman
` (84 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Joakim Zhang, Marc Kleine-Budde
From: Joakim Zhang <qiangqing.zhang@nxp.com>
commit 5e269324db5adb2f5f6ec9a93a9c7b0672932b47 upstream.
The ECC (memory error detection and correction) mechanism can be
activated or not, controlled by the ECCDIS bit in CAN_MECR. When
disabled, updates on indications and reporting registers are stopped.
So if want to disable ECC completely, had better assert ECCDIS bit, not
just mask the related interrupts.
Fixes: cdce844865be ("can: flexcan: add vf610 support for FlexCAN")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/flexcan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1048,6 +1048,7 @@ static int flexcan_chip_start(struct net
reg_mecr = priv->read(®s->mecr);
reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS;
priv->write(reg_mecr, ®s->mecr);
+ reg_mecr |= FLEXCAN_MECR_ECCDIS;
reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK |
FLEXCAN_MECR_FANCEI_MSK);
priv->write(reg_mecr, ®s->mecr);
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 045/125] can: c_can: c_can_poll(): only read status register after status IRQ
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (43 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 044/125] can: flexcan: disable completely the ECC mechanism Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 046/125] can: peak_usb: fix a potential out-of-sync while decoding packets Greg Kroah-Hartman
` (83 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kurt Van Dijck, Wolfgang Grandegger,
Joe Burmeister, Marc Kleine-Budde
From: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
commit 3cb3eaac52c0f145d895f4b6c22834d5f02b8569 upstream.
When the status register is read without the status IRQ pending, the
chip may not raise the interrupt line for an upcoming status interrupt
and the driver may miss a status interrupt.
It is critical that the BUSOFF status interrupt is forwarded to the
higher layers, since no more interrupts will follow without
intervention.
Thanks to Wolfgang and Joe for bringing up the first idea.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Joe Burmeister <joe.burmeister@devtank.co.uk>
Fixes: fa39b54ccf28 ("can: c_can: Get rid of pointless interrupts")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/c_can/c_can.c | 25 ++++++++++++++++++++-----
drivers/net/can/c_can/c_can.h | 1 +
2 files changed, 21 insertions(+), 5 deletions(-)
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -97,6 +97,9 @@
#define BTR_TSEG2_SHIFT 12
#define BTR_TSEG2_MASK (0x7 << BTR_TSEG2_SHIFT)
+/* interrupt register */
+#define INT_STS_PENDING 0x8000
+
/* brp extension register */
#define BRP_EXT_BRPE_MASK 0x0f
#define BRP_EXT_BRPE_SHIFT 0
@@ -1029,10 +1032,16 @@ static int c_can_poll(struct napi_struct
u16 curr, last = priv->last_status;
int work_done = 0;
- priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
- /* Ack status on C_CAN. D_CAN is self clearing */
- if (priv->type != BOSCH_D_CAN)
- priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+ /* Only read the status register if a status interrupt was pending */
+ if (atomic_xchg(&priv->sie_pending, 0)) {
+ priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
+ /* Ack status on C_CAN. D_CAN is self clearing */
+ if (priv->type != BOSCH_D_CAN)
+ priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+ } else {
+ /* no change detected ... */
+ curr = last;
+ }
/* handle state changes */
if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) {
@@ -1083,10 +1092,16 @@ static irqreturn_t c_can_isr(int irq, vo
{
struct net_device *dev = (struct net_device *)dev_id;
struct c_can_priv *priv = netdev_priv(dev);
+ int reg_int;
- if (!priv->read_reg(priv, C_CAN_INT_REG))
+ reg_int = priv->read_reg(priv, C_CAN_INT_REG);
+ if (!reg_int)
return IRQ_NONE;
+ /* save for later use */
+ if (reg_int & INT_STS_PENDING)
+ atomic_set(&priv->sie_pending, 1);
+
/* disable all interrupts and schedule the NAPI */
c_can_irq_control(priv, false);
napi_schedule(&priv->napi);
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -198,6 +198,7 @@ struct c_can_priv {
struct net_device *dev;
struct device *device;
atomic_t tx_active;
+ atomic_t sie_pending;
unsigned long tx_dir;
int last_status;
u16 (*read_reg) (const struct c_can_priv *priv, enum reg index);
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 046/125] can: peak_usb: fix a potential out-of-sync while decoding packets
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (44 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 045/125] can: c_can: c_can_poll(): only read status register after status IRQ Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 047/125] can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid skb mem leak Greg Kroah-Hartman
` (82 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stephane Grosjean, Marc Kleine-Budde
From: Stephane Grosjean <s.grosjean@peak-system.com>
commit de280f403f2996679e2607384980703710576fed upstream.
When decoding a buffer received from PCAN-USB, the first timestamp read in
a packet is a 16-bit coded time base, and the next ones are an 8-bit
offset to this base, regardless of the type of packet read.
This patch corrects a potential loss of synchronization by using a
timestamp index read from the buffer, rather than an index of received
data packets, to determine on the sizeof the timestamp to be read from the
packet being decoded.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Fixes: 46be265d3388 ("can: usb: PEAK-System Technik PCAN-USB specific part")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/usb/peak_usb/pcan_usb.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -108,7 +108,7 @@ struct pcan_usb_msg_context {
u8 *end;
u8 rec_cnt;
u8 rec_idx;
- u8 rec_data_idx;
+ u8 rec_ts_idx;
struct net_device *netdev;
struct pcan_usb *pdev;
};
@@ -555,10 +555,15 @@ static int pcan_usb_decode_status(struct
mc->ptr += PCAN_USB_CMD_ARGS;
if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) {
- int err = pcan_usb_decode_ts(mc, !mc->rec_idx);
+ int err = pcan_usb_decode_ts(mc, !mc->rec_ts_idx);
if (err)
return err;
+
+ /* Next packet in the buffer will have a timestamp on a single
+ * byte
+ */
+ mc->rec_ts_idx++;
}
switch (f) {
@@ -640,10 +645,13 @@ static int pcan_usb_decode_data(struct p
cf->can_dlc = get_can_dlc(rec_len);
- /* first data packet timestamp is a word */
- if (pcan_usb_decode_ts(mc, !mc->rec_data_idx))
+ /* Only first packet timestamp is a word */
+ if (pcan_usb_decode_ts(mc, !mc->rec_ts_idx))
goto decode_failed;
+ /* Next packet in the buffer will have a timestamp on a single byte */
+ mc->rec_ts_idx++;
+
/* read data */
memset(cf->data, 0x0, sizeof(cf->data));
if (status_len & PCAN_USB_STATUSLEN_RTR) {
@@ -696,7 +704,6 @@ static int pcan_usb_decode_msg(struct pe
/* handle normal can frames here */
} else {
err = pcan_usb_decode_data(&mc, sl);
- mc.rec_data_idx++;
}
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 047/125] can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid skb mem leak
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (45 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 046/125] can: peak_usb: fix a potential out-of-sync while decoding packets Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 048/125] can: gs_usb: gs_can_open(): prevent memory leak Greg Kroah-Hartman
` (81 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Martin Hundebøll, Marc Kleine-Budde
From: Marc Kleine-Budde <mkl@pengutronix.de>
commit ca913f1ac024559ebc17f0b599af262f0ad997c9 upstream.
If the rx-offload skb_queue is full can_rx_offload_queue_sorted() will
not queue the skb and return with an error.
None of the callers of this function, issue a kfree_skb() to free the
not queued skb. This results in a memory leak.
This patch fixes the problem by freeing the skb in case of a full queue.
The return value is adjusted to -ENOBUFS to better reflect the actual
problem.
The device stats handling is left to the callers, as this function might
be used in both the rx and tx path.
Fixes: 55059f2b7f86 ("can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions")
Cc: linux-stable <stable@vger.kernel.org>
Cc: Martin Hundebøll <martin@geanix.com>
Reported-by: Martin Hundebøll <martin@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/rx-offload.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/can/rx-offload.c
+++ b/drivers/net/can/rx-offload.c
@@ -216,8 +216,10 @@ int can_rx_offload_queue_sorted(struct c
unsigned long flags;
if (skb_queue_len(&offload->skb_queue) >
- offload->skb_queue_len_max)
- return -ENOMEM;
+ offload->skb_queue_len_max) {
+ kfree_skb(skb);
+ return -ENOBUFS;
+ }
cb = can_rx_offload_get_cb(skb);
cb->timestamp = timestamp;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 048/125] can: gs_usb: gs_can_open(): prevent memory leak
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (46 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 047/125] can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid skb mem leak Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 049/125] can: dev: add missing of_node_put() after calling of_get_child_by_name() Greg Kroah-Hartman
` (80 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Navid Emamdoost, Marc Kleine-Budde
From: Navid Emamdoost <navid.emamdoost@gmail.com>
commit fb5be6a7b4863ecc44963bb80ca614584b6c7817 upstream.
In gs_can_open() if usb_submit_urb() fails the allocated urb should be
released.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/usb/gs_usb.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -631,6 +631,7 @@ static int gs_can_open(struct net_device
rc);
usb_unanchor_urb(urb);
+ usb_free_urb(urb);
break;
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 049/125] can: dev: add missing of_node_put() after calling of_get_child_by_name()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (47 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 048/125] can: gs_usb: gs_can_open(): prevent memory leak Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 050/125] can: mcba_usb: fix use-after-free on disconnect Greg Kroah-Hartman
` (79 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Franklin S Cooper Jr, Wen Yang,
Marc Kleine-Budde
From: Wen Yang <wenyang@linux.alibaba.com>
commit db9ee384f6f71f7c5296ce85b7c1a2a2527e7c72 upstream.
of_node_put() needs to be called when the device node which is got
from of_get_child_by_name() finished using.
Fixes: 2290aefa2e90 ("can: dev: Add support for limiting configured bitrate")
Cc: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/dev.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -853,6 +853,7 @@ void of_can_transceiver(struct net_devic
return;
ret = of_property_read_u32(dn, "max-bitrate", &priv->bitrate_max);
+ of_node_put(dn);
if ((ret && ret != -EINVAL) || (!ret && !priv->bitrate_max))
netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n");
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 050/125] can: mcba_usb: fix use-after-free on disconnect
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (48 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 049/125] can: dev: add missing of_node_put() after calling of_get_child_by_name() Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 051/125] can: peak_usb: fix slab info leak Greg Kroah-Hartman
` (78 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Remigiusz Kołłątaj,
syzbot+e29b17e5042bbc56fae9, Johan Hovold, Marc Kleine-Budde
From: Johan Hovold <johan@kernel.org>
commit 4d6636498c41891d0482a914dd570343a838ad79 upstream.
The driver was accessing its driver data after having freed it.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Cc: stable <stable@vger.kernel.org> # 4.12
Cc: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com>
Reported-by: syzbot+e29b17e5042bbc56fae9@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/usb/mcba_usb.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -887,9 +887,8 @@ static void mcba_usb_disconnect(struct u
netdev_info(priv->netdev, "device disconnected\n");
unregister_candev(priv->netdev);
- free_candev(priv->netdev);
-
mcba_urb_unlink(priv);
+ free_candev(priv->netdev);
}
static struct usb_driver mcba_usb_driver = {
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 051/125] can: peak_usb: fix slab info leak
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (49 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 050/125] can: mcba_usb: fix use-after-free on disconnect Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 052/125] configfs: stash the data we need into configfs_buffer at open time Greg Kroah-Hartman
` (77 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+863724e7128e14b26732,
Johan Hovold, Marc Kleine-Budde
From: Johan Hovold <johan@kernel.org>
commit f7a1337f0d29b98733c8824e165fca3371d7d4fd upstream.
Fix a small slab info leak due to a failure to clear the command buffer
at allocation.
The first 16 bytes of the command buffer are always sent to the device
in pcan_usb_send_cmd() even though only the first two may have been
initialised in case no argument payload is provided (e.g. when waiting
for a response).
Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Cc: stable <stable@vger.kernel.org> # 3.4
Reported-by: syzbot+863724e7128e14b26732@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/usb/peak_usb/pcan_usb_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -758,7 +758,7 @@ static int peak_usb_create_dev(const str
dev = netdev_priv(netdev);
/* allocate a buffer large enough to send commands */
- dev->cmd_buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL);
+ dev->cmd_buf = kzalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL);
if (!dev->cmd_buf) {
err = -ENOMEM;
goto lbl_free_candev;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 052/125] configfs: stash the data we need into configfs_buffer at open time
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (50 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 051/125] can: peak_usb: fix slab info leak Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 053/125] configfs_register_group() shouldnt be (and isnt) called in rmdirable parts Greg Kroah-Hartman
` (76 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Al Viro, Christoph Hellwig
From: Al Viro <viro@zeniv.linux.org.uk>
commit ff4dd081977da56566a848f071aed8fa92d604a1 upstream.
simplifies the ->read()/->write()/->release() instances nicely
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/configfs/file.c | 229 +++++++++++++++++++++--------------------------------
1 file changed, 95 insertions(+), 134 deletions(-)
--- a/fs/configfs/file.c
+++ b/fs/configfs/file.c
@@ -53,24 +53,18 @@ struct configfs_buffer {
bool write_in_progress;
char *bin_buffer;
int bin_buffer_size;
+ int cb_max_size;
+ struct config_item *item;
+ struct module *owner;
+ union {
+ struct configfs_attribute *attr;
+ struct configfs_bin_attribute *bin_attr;
+ };
};
-/**
- * fill_read_buffer - allocate and fill buffer from item.
- * @dentry: dentry pointer.
- * @buffer: data buffer for file.
- *
- * Allocate @buffer->page, if it hasn't been already, then call the
- * config_item's show() method to fill the buffer with this attribute's
- * data.
- * This is called only once, on the file's first read.
- */
-static int fill_read_buffer(struct dentry * dentry, struct configfs_buffer * buffer)
+static int fill_read_buffer(struct configfs_buffer * buffer)
{
- struct configfs_attribute * attr = to_attr(dentry);
- struct config_item * item = to_item(dentry->d_parent);
- int ret = 0;
ssize_t count;
if (!buffer->page)
@@ -78,15 +72,15 @@ static int fill_read_buffer(struct dentr
if (!buffer->page)
return -ENOMEM;
- count = attr->show(item, buffer->page);
+ count = buffer->attr->show(buffer->item, buffer->page);
+ if (count < 0)
+ return count;
+ if (WARN_ON_ONCE(count > (ssize_t)SIMPLE_ATTR_SIZE))
+ return -EIO;
- BUG_ON(count > (ssize_t)SIMPLE_ATTR_SIZE);
- if (count >= 0) {
- buffer->needs_read_fill = 0;
- buffer->count = count;
- } else
- ret = count;
- return ret;
+ buffer->needs_read_fill = 0;
+ buffer->count = count;
+ return 0;
}
/**
@@ -111,12 +105,13 @@ static int fill_read_buffer(struct dentr
static ssize_t
configfs_read_file(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
- struct configfs_buffer * buffer = file->private_data;
+ struct configfs_buffer *buffer = file->private_data;
ssize_t retval = 0;
mutex_lock(&buffer->mutex);
if (buffer->needs_read_fill) {
- if ((retval = fill_read_buffer(file->f_path.dentry,buffer)))
+ retval = fill_read_buffer(buffer);
+ if (retval)
goto out;
}
pr_debug("%s: count = %zd, ppos = %lld, buf = %s\n",
@@ -153,9 +148,6 @@ configfs_read_bin_file(struct file *file
size_t count, loff_t *ppos)
{
struct configfs_buffer *buffer = file->private_data;
- struct dentry *dentry = file->f_path.dentry;
- struct config_item *item = to_item(dentry->d_parent);
- struct configfs_bin_attribute *bin_attr = to_bin_attr(dentry);
ssize_t retval = 0;
ssize_t len = min_t(size_t, count, PAGE_SIZE);
@@ -170,14 +162,14 @@ configfs_read_bin_file(struct file *file
if (buffer->needs_read_fill) {
/* perform first read with buf == NULL to get extent */
- len = bin_attr->read(item, NULL, 0);
+ len = buffer->bin_attr->read(buffer->item, NULL, 0);
if (len <= 0) {
retval = len;
goto out;
}
/* do not exceed the maximum value */
- if (bin_attr->cb_max_size && len > bin_attr->cb_max_size) {
+ if (buffer->cb_max_size && len > buffer->cb_max_size) {
retval = -EFBIG;
goto out;
}
@@ -190,7 +182,8 @@ configfs_read_bin_file(struct file *file
buffer->bin_buffer_size = len;
/* perform second read to fill buffer */
- len = bin_attr->read(item, buffer->bin_buffer, len);
+ len = buffer->bin_attr->read(buffer->item,
+ buffer->bin_buffer, len);
if (len < 0) {
retval = len;
vfree(buffer->bin_buffer);
@@ -240,25 +233,10 @@ fill_write_buffer(struct configfs_buffer
return error ? -EFAULT : count;
}
-
-/**
- * flush_write_buffer - push buffer to config_item.
- * @dentry: dentry to the attribute
- * @buffer: data buffer for file.
- * @count: number of bytes
- *
- * Get the correct pointers for the config_item and the attribute we're
- * dealing with, then call the store() method for the attribute,
- * passing the buffer that we acquired in fill_write_buffer().
- */
-
static int
-flush_write_buffer(struct dentry * dentry, struct configfs_buffer * buffer, size_t count)
+flush_write_buffer(struct configfs_buffer *buffer, size_t count)
{
- struct configfs_attribute * attr = to_attr(dentry);
- struct config_item * item = to_item(dentry->d_parent);
-
- return attr->store(item, buffer->page, count);
+ return buffer->attr->store(buffer->item, buffer->page, count);
}
@@ -282,13 +260,13 @@ flush_write_buffer(struct dentry * dentr
static ssize_t
configfs_write_file(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
- struct configfs_buffer * buffer = file->private_data;
+ struct configfs_buffer *buffer = file->private_data;
ssize_t len;
mutex_lock(&buffer->mutex);
len = fill_write_buffer(buffer, buf, count);
if (len > 0)
- len = flush_write_buffer(file->f_path.dentry, buffer, len);
+ len = flush_write_buffer(buffer, len);
if (len > 0)
*ppos += len;
mutex_unlock(&buffer->mutex);
@@ -313,8 +291,6 @@ configfs_write_bin_file(struct file *fil
size_t count, loff_t *ppos)
{
struct configfs_buffer *buffer = file->private_data;
- struct dentry *dentry = file->f_path.dentry;
- struct configfs_bin_attribute *bin_attr = to_bin_attr(dentry);
void *tbuf = NULL;
ssize_t len;
@@ -330,8 +306,8 @@ configfs_write_bin_file(struct file *fil
/* buffer grows? */
if (*ppos + count > buffer->bin_buffer_size) {
- if (bin_attr->cb_max_size &&
- *ppos + count > bin_attr->cb_max_size) {
+ if (buffer->cb_max_size &&
+ *ppos + count > buffer->cb_max_size) {
len = -EFBIG;
goto out;
}
@@ -363,31 +339,45 @@ out:
return len;
}
-static int check_perm(struct inode * inode, struct file * file, int type)
+static int __configfs_open_file(struct inode *inode, struct file *file, int type)
{
- struct config_item *item = configfs_get_config_item(file->f_path.dentry->d_parent);
- struct configfs_attribute * attr = to_attr(file->f_path.dentry);
- struct configfs_bin_attribute *bin_attr = NULL;
- struct configfs_buffer * buffer;
- struct configfs_item_operations * ops = NULL;
- int error = 0;
+ struct dentry *dentry = file->f_path.dentry;
+ struct configfs_attribute *attr;
+ struct configfs_buffer *buffer;
+ int error;
- if (!item || !attr)
- goto Einval;
+ error = -ENOMEM;
+ buffer = kzalloc(sizeof(struct configfs_buffer), GFP_KERNEL);
+ if (!buffer)
+ goto out;
- if (type & CONFIGFS_ITEM_BIN_ATTR)
- bin_attr = to_bin_attr(file->f_path.dentry);
+ error = -EINVAL;
+ buffer->item = configfs_get_config_item(dentry->d_parent);
+ if (!buffer->item)
+ goto out_free_buffer;
+
+ attr = to_attr(dentry);
+ if (!attr)
+ goto out_put_item;
+
+ if (type & CONFIGFS_ITEM_BIN_ATTR) {
+ buffer->bin_attr = to_bin_attr(dentry);
+ buffer->cb_max_size = buffer->bin_attr->cb_max_size;
+ } else {
+ buffer->attr = attr;
+ }
+ buffer->owner = attr->ca_owner;
/* Grab the module reference for this attribute if we have one */
- if (!try_module_get(attr->ca_owner)) {
- error = -ENODEV;
- goto Done;
- }
+ error = -ENODEV;
+ if (!try_module_get(buffer->owner))
+ goto out_put_item;
- if (item->ci_type)
- ops = item->ci_type->ct_item_ops;
- else
- goto Eaccess;
+ error = -EACCES;
+ if (!buffer->item->ci_type)
+ goto out_put_module;
+
+ buffer->ops = buffer->item->ci_type->ct_item_ops;
/* File needs write support.
* The inode's perms must say it's ok,
@@ -395,13 +385,11 @@ static int check_perm(struct inode * ino
*/
if (file->f_mode & FMODE_WRITE) {
if (!(inode->i_mode & S_IWUGO))
- goto Eaccess;
-
+ goto out_put_module;
if ((type & CONFIGFS_ITEM_ATTR) && !attr->store)
- goto Eaccess;
-
- if ((type & CONFIGFS_ITEM_BIN_ATTR) && !bin_attr->write)
- goto Eaccess;
+ goto out_put_module;
+ if ((type & CONFIGFS_ITEM_BIN_ATTR) && !buffer->bin_attr->write)
+ goto out_put_module;
}
/* File needs read support.
@@ -410,90 +398,65 @@ static int check_perm(struct inode * ino
*/
if (file->f_mode & FMODE_READ) {
if (!(inode->i_mode & S_IRUGO))
- goto Eaccess;
-
+ goto out_put_module;
if ((type & CONFIGFS_ITEM_ATTR) && !attr->show)
- goto Eaccess;
-
- if ((type & CONFIGFS_ITEM_BIN_ATTR) && !bin_attr->read)
- goto Eaccess;
+ goto out_put_module;
+ if ((type & CONFIGFS_ITEM_BIN_ATTR) && !buffer->bin_attr->read)
+ goto out_put_module;
}
- /* No error? Great, allocate a buffer for the file, and store it
- * it in file->private_data for easy access.
- */
- buffer = kzalloc(sizeof(struct configfs_buffer),GFP_KERNEL);
- if (!buffer) {
- error = -ENOMEM;
- goto Enomem;
- }
mutex_init(&buffer->mutex);
buffer->needs_read_fill = 1;
buffer->read_in_progress = false;
buffer->write_in_progress = false;
- buffer->ops = ops;
file->private_data = buffer;
- goto Done;
+ return 0;
- Einval:
- error = -EINVAL;
- goto Done;
- Eaccess:
- error = -EACCES;
- Enomem:
- module_put(attr->ca_owner);
- Done:
- if (error && item)
- config_item_put(item);
+out_put_module:
+ module_put(buffer->owner);
+out_put_item:
+ config_item_put(buffer->item);
+out_free_buffer:
+ kfree(buffer);
+out:
return error;
}
static int configfs_release(struct inode *inode, struct file *filp)
{
- struct config_item * item = to_item(filp->f_path.dentry->d_parent);
- struct configfs_attribute * attr = to_attr(filp->f_path.dentry);
- struct module * owner = attr->ca_owner;
- struct configfs_buffer * buffer = filp->private_data;
-
- if (item)
- config_item_put(item);
- /* After this point, attr should not be accessed. */
- module_put(owner);
-
- if (buffer) {
- if (buffer->page)
- free_page((unsigned long)buffer->page);
- mutex_destroy(&buffer->mutex);
- kfree(buffer);
- }
+ struct configfs_buffer *buffer = filp->private_data;
+
+ if (buffer->item)
+ config_item_put(buffer->item);
+ module_put(buffer->owner);
+ if (buffer->page)
+ free_page((unsigned long)buffer->page);
+ mutex_destroy(&buffer->mutex);
+ kfree(buffer);
return 0;
}
static int configfs_open_file(struct inode *inode, struct file *filp)
{
- return check_perm(inode, filp, CONFIGFS_ITEM_ATTR);
+ return __configfs_open_file(inode, filp, CONFIGFS_ITEM_ATTR);
}
static int configfs_open_bin_file(struct inode *inode, struct file *filp)
{
- return check_perm(inode, filp, CONFIGFS_ITEM_BIN_ATTR);
+ return __configfs_open_file(inode, filp, CONFIGFS_ITEM_BIN_ATTR);
}
-static int configfs_release_bin_file(struct inode *inode, struct file *filp)
+static int configfs_release_bin_file(struct inode *inode, struct file *file)
{
- struct configfs_buffer *buffer = filp->private_data;
- struct dentry *dentry = filp->f_path.dentry;
- struct config_item *item = to_item(dentry->d_parent);
- struct configfs_bin_attribute *bin_attr = to_bin_attr(dentry);
- ssize_t len = 0;
- int ret;
+ struct configfs_buffer *buffer = file->private_data;
buffer->read_in_progress = false;
if (buffer->write_in_progress) {
buffer->write_in_progress = false;
- len = bin_attr->write(item, buffer->bin_buffer,
+ /* result of ->release() is ignored */
+ buffer->bin_attr->write(buffer->item, buffer->bin_buffer,
buffer->bin_buffer_size);
/* vfree on NULL is safe */
@@ -503,10 +466,8 @@ static int configfs_release_bin_file(str
buffer->needs_read_fill = 1;
}
- ret = configfs_release(inode, filp);
- if (len < 0)
- return len;
- return ret;
+ configfs_release(inode, file);
+ return 0;
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 053/125] configfs_register_group() shouldnt be (and isnt) called in rmdirable parts
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (51 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 052/125] configfs: stash the data we need into configfs_buffer at open time Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 054/125] configfs: new object reprsenting tree fragments Greg Kroah-Hartman
` (75 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Al Viro, Christoph Hellwig
From: Al Viro <viro@zeniv.linux.org.uk>
commit f19e4ed1e1edbfa3c9ccb9fed17759b7d6db24c6 upstream.
revert cc57c07343bd "configfs: fix registered group removal"
It was an attempt to handle something that fundamentally doesn't
work - configfs_register_group() should never be done in a part
of tree that can be rmdir'ed. And in mainline it never had been,
so let's not borrow trouble; the fix was racy anyway, it would take
a lot more to make that work and desired semantics is not clear.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/configfs/dir.c | 11 -----------
1 file changed, 11 deletions(-)
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -1782,16 +1782,6 @@ void configfs_unregister_group(struct co
struct dentry *dentry = group->cg_item.ci_dentry;
struct dentry *parent = group->cg_item.ci_parent->ci_dentry;
- mutex_lock(&subsys->su_mutex);
- if (!group->cg_item.ci_parent->ci_group) {
- /*
- * The parent has already been unlinked and detached
- * due to a rmdir.
- */
- goto unlink_group;
- }
- mutex_unlock(&subsys->su_mutex);
-
inode_lock_nested(d_inode(parent), I_MUTEX_PARENT);
spin_lock(&configfs_dirent_lock);
configfs_detach_prep(dentry, NULL);
@@ -1806,7 +1796,6 @@ void configfs_unregister_group(struct co
dput(dentry);
mutex_lock(&subsys->su_mutex);
-unlink_group:
unlink_group(group);
mutex_unlock(&subsys->su_mutex);
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 054/125] configfs: new object reprsenting tree fragments
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (52 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 053/125] configfs_register_group() shouldnt be (and isnt) called in rmdirable parts Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 055/125] configfs: provide exclusion between IO and removals Greg Kroah-Hartman
` (74 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Al Viro, Christoph Hellwig
From: Al Viro <viro@zeniv.linux.org.uk>
commit 47320fbe11a6059ae502c9c16b668022fdb4cf76 upstream.
Refcounted, hangs of configfs_dirent, created by operations that add
fragments to configfs tree (mkdir and configfs_register_{subsystem,group}).
Will be used in the next commit to provide exclusion between fragment
removal and ->show/->store calls.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/configfs/configfs_internal.h | 15 ++++-
fs/configfs/dir.c | 105 +++++++++++++++++++++++++++++++---------
fs/configfs/file.c | 4 -
3 files changed, 97 insertions(+), 27 deletions(-)
--- a/fs/configfs/configfs_internal.h
+++ b/fs/configfs/configfs_internal.h
@@ -34,6 +34,15 @@
#include <linux/list.h>
#include <linux/spinlock.h>
+struct configfs_fragment {
+ atomic_t frag_count;
+ struct rw_semaphore frag_sem;
+ bool frag_dead;
+};
+
+void put_fragment(struct configfs_fragment *);
+struct configfs_fragment *get_fragment(struct configfs_fragment *);
+
struct configfs_dirent {
atomic_t s_count;
int s_dependent_count;
@@ -48,6 +57,7 @@ struct configfs_dirent {
#ifdef CONFIG_LOCKDEP
int s_depth;
#endif
+ struct configfs_fragment *s_frag;
};
#define CONFIGFS_ROOT 0x0001
@@ -75,8 +85,8 @@ extern int configfs_create(struct dentry
extern int configfs_create_file(struct config_item *, const struct configfs_attribute *);
extern int configfs_create_bin_file(struct config_item *,
const struct configfs_bin_attribute *);
-extern int configfs_make_dirent(struct configfs_dirent *,
- struct dentry *, void *, umode_t, int);
+extern int configfs_make_dirent(struct configfs_dirent *, struct dentry *,
+ void *, umode_t, int, struct configfs_fragment *);
extern int configfs_dirent_is_ready(struct configfs_dirent *);
extern void configfs_hash_and_remove(struct dentry * dir, const char * name);
@@ -151,6 +161,7 @@ static inline void release_configfs_dire
{
if (!(sd->s_type & CONFIGFS_ROOT)) {
kfree(sd->s_iattr);
+ put_fragment(sd->s_frag);
kmem_cache_free(configfs_dir_cachep, sd);
}
}
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -164,11 +164,38 @@ configfs_adjust_dir_dirent_depth_after_p
#endif /* CONFIG_LOCKDEP */
+static struct configfs_fragment *new_fragment(void)
+{
+ struct configfs_fragment *p;
+
+ p = kmalloc(sizeof(struct configfs_fragment), GFP_KERNEL);
+ if (p) {
+ atomic_set(&p->frag_count, 1);
+ init_rwsem(&p->frag_sem);
+ p->frag_dead = false;
+ }
+ return p;
+}
+
+void put_fragment(struct configfs_fragment *frag)
+{
+ if (frag && atomic_dec_and_test(&frag->frag_count))
+ kfree(frag);
+}
+
+struct configfs_fragment *get_fragment(struct configfs_fragment *frag)
+{
+ if (likely(frag))
+ atomic_inc(&frag->frag_count);
+ return frag;
+}
+
/*
* Allocates a new configfs_dirent and links it to the parent configfs_dirent
*/
static struct configfs_dirent *configfs_new_dirent(struct configfs_dirent *parent_sd,
- void *element, int type)
+ void *element, int type,
+ struct configfs_fragment *frag)
{
struct configfs_dirent * sd;
@@ -188,6 +215,7 @@ static struct configfs_dirent *configfs_
kmem_cache_free(configfs_dir_cachep, sd);
return ERR_PTR(-ENOENT);
}
+ sd->s_frag = get_fragment(frag);
list_add(&sd->s_sibling, &parent_sd->s_children);
spin_unlock(&configfs_dirent_lock);
@@ -222,11 +250,11 @@ static int configfs_dirent_exists(struct
int configfs_make_dirent(struct configfs_dirent * parent_sd,
struct dentry * dentry, void * element,
- umode_t mode, int type)
+ umode_t mode, int type, struct configfs_fragment *frag)
{
struct configfs_dirent * sd;
- sd = configfs_new_dirent(parent_sd, element, type);
+ sd = configfs_new_dirent(parent_sd, element, type, frag);
if (IS_ERR(sd))
return PTR_ERR(sd);
@@ -273,7 +301,8 @@ static void init_symlink(struct inode *
* until it is validated by configfs_dir_set_ready()
*/
-static int configfs_create_dir(struct config_item *item, struct dentry *dentry)
+static int configfs_create_dir(struct config_item *item, struct dentry *dentry,
+ struct configfs_fragment *frag)
{
int error;
umode_t mode = S_IFDIR| S_IRWXU | S_IRUGO | S_IXUGO;
@@ -286,7 +315,8 @@ static int configfs_create_dir(struct co
return error;
error = configfs_make_dirent(p->d_fsdata, dentry, item, mode,
- CONFIGFS_DIR | CONFIGFS_USET_CREATING);
+ CONFIGFS_DIR | CONFIGFS_USET_CREATING,
+ frag);
if (unlikely(error))
return error;
@@ -351,9 +381,10 @@ int configfs_create_link(struct configfs
{
int err = 0;
umode_t mode = S_IFLNK | S_IRWXUGO;
+ struct configfs_dirent *p = parent->d_fsdata;
- err = configfs_make_dirent(parent->d_fsdata, dentry, sl, mode,
- CONFIGFS_ITEM_LINK);
+ err = configfs_make_dirent(p, dentry, sl, mode,
+ CONFIGFS_ITEM_LINK, p->s_frag);
if (!err) {
err = configfs_create(dentry, mode, init_symlink);
if (err) {
@@ -612,7 +643,8 @@ static int populate_attrs(struct config_
static int configfs_attach_group(struct config_item *parent_item,
struct config_item *item,
- struct dentry *dentry);
+ struct dentry *dentry,
+ struct configfs_fragment *frag);
static void configfs_detach_group(struct config_item *item);
static void detach_groups(struct config_group *group)
@@ -660,7 +692,8 @@ static void detach_groups(struct config_
* try using vfs_mkdir. Just a thought.
*/
static int create_default_group(struct config_group *parent_group,
- struct config_group *group)
+ struct config_group *group,
+ struct configfs_fragment *frag)
{
int ret;
struct configfs_dirent *sd;
@@ -676,7 +709,7 @@ static int create_default_group(struct c
d_add(child, NULL);
ret = configfs_attach_group(&parent_group->cg_item,
- &group->cg_item, child);
+ &group->cg_item, child, frag);
if (!ret) {
sd = child->d_fsdata;
sd->s_type |= CONFIGFS_USET_DEFAULT;
@@ -690,13 +723,14 @@ static int create_default_group(struct c
return ret;
}
-static int populate_groups(struct config_group *group)
+static int populate_groups(struct config_group *group,
+ struct configfs_fragment *frag)
{
struct config_group *new_group;
int ret = 0;
list_for_each_entry(new_group, &group->default_groups, group_entry) {
- ret = create_default_group(group, new_group);
+ ret = create_default_group(group, new_group, frag);
if (ret) {
detach_groups(group);
break;
@@ -810,11 +844,12 @@ static void link_group(struct config_gro
*/
static int configfs_attach_item(struct config_item *parent_item,
struct config_item *item,
- struct dentry *dentry)
+ struct dentry *dentry,
+ struct configfs_fragment *frag)
{
int ret;
- ret = configfs_create_dir(item, dentry);
+ ret = configfs_create_dir(item, dentry, frag);
if (!ret) {
ret = populate_attrs(item);
if (ret) {
@@ -844,12 +879,13 @@ static void configfs_detach_item(struct
static int configfs_attach_group(struct config_item *parent_item,
struct config_item *item,
- struct dentry *dentry)
+ struct dentry *dentry,
+ struct configfs_fragment *frag)
{
int ret;
struct configfs_dirent *sd;
- ret = configfs_attach_item(parent_item, item, dentry);
+ ret = configfs_attach_item(parent_item, item, dentry, frag);
if (!ret) {
sd = dentry->d_fsdata;
sd->s_type |= CONFIGFS_USET_DIR;
@@ -865,7 +901,7 @@ static int configfs_attach_group(struct
*/
inode_lock_nested(d_inode(dentry), I_MUTEX_CHILD);
configfs_adjust_dir_dirent_depth_before_populate(sd);
- ret = populate_groups(to_config_group(item));
+ ret = populate_groups(to_config_group(item), frag);
if (ret) {
configfs_detach_item(item);
d_inode(dentry)->i_flags |= S_DEAD;
@@ -1260,6 +1296,7 @@ static int configfs_mkdir(struct inode *
struct configfs_dirent *sd;
const struct config_item_type *type;
struct module *subsys_owner = NULL, *new_item_owner = NULL;
+ struct configfs_fragment *frag;
char *name;
sd = dentry->d_parent->d_fsdata;
@@ -1278,6 +1315,12 @@ static int configfs_mkdir(struct inode *
goto out;
}
+ frag = new_fragment();
+ if (!frag) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
/* Get a working ref for the duration of this function */
parent_item = configfs_get_config_item(dentry->d_parent);
type = parent_item->ci_type;
@@ -1380,9 +1423,9 @@ static int configfs_mkdir(struct inode *
spin_unlock(&configfs_dirent_lock);
if (group)
- ret = configfs_attach_group(parent_item, item, dentry);
+ ret = configfs_attach_group(parent_item, item, dentry, frag);
else
- ret = configfs_attach_item(parent_item, item, dentry);
+ ret = configfs_attach_item(parent_item, item, dentry, frag);
spin_lock(&configfs_dirent_lock);
sd->s_type &= ~CONFIGFS_USET_IN_MKDIR;
@@ -1419,6 +1462,7 @@ out_put:
* reference.
*/
config_item_put(parent_item);
+ put_fragment(frag);
out:
return ret;
@@ -1587,7 +1631,7 @@ static int configfs_dir_open(struct inod
*/
err = -ENOENT;
if (configfs_dirent_is_ready(parent_sd)) {
- file->private_data = configfs_new_dirent(parent_sd, NULL, 0);
+ file->private_data = configfs_new_dirent(parent_sd, NULL, 0, NULL);
if (IS_ERR(file->private_data))
err = PTR_ERR(file->private_data);
else
@@ -1743,8 +1787,13 @@ int configfs_register_group(struct confi
{
struct configfs_subsystem *subsys = parent_group->cg_subsys;
struct dentry *parent;
+ struct configfs_fragment *frag;
int ret;
+ frag = new_fragment();
+ if (!frag)
+ return -ENOMEM;
+
mutex_lock(&subsys->su_mutex);
link_group(parent_group, group);
mutex_unlock(&subsys->su_mutex);
@@ -1752,7 +1801,7 @@ int configfs_register_group(struct confi
parent = parent_group->cg_item.ci_dentry;
inode_lock_nested(d_inode(parent), I_MUTEX_PARENT);
- ret = create_default_group(parent_group, group);
+ ret = create_default_group(parent_group, group, frag);
if (ret)
goto err_out;
@@ -1760,12 +1809,14 @@ int configfs_register_group(struct confi
configfs_dir_set_ready(group->cg_item.ci_dentry->d_fsdata);
spin_unlock(&configfs_dirent_lock);
inode_unlock(d_inode(parent));
+ put_fragment(frag);
return 0;
err_out:
inode_unlock(d_inode(parent));
mutex_lock(&subsys->su_mutex);
unlink_group(group);
mutex_unlock(&subsys->su_mutex);
+ put_fragment(frag);
return ret;
}
EXPORT_SYMBOL(configfs_register_group);
@@ -1852,10 +1903,17 @@ int configfs_register_subsystem(struct c
struct dentry *dentry;
struct dentry *root;
struct configfs_dirent *sd;
+ struct configfs_fragment *frag;
+
+ frag = new_fragment();
+ if (!frag)
+ return -ENOMEM;
root = configfs_pin_fs();
- if (IS_ERR(root))
+ if (IS_ERR(root)) {
+ put_fragment(frag);
return PTR_ERR(root);
+ }
if (!group->cg_item.ci_name)
group->cg_item.ci_name = group->cg_item.ci_namebuf;
@@ -1871,7 +1929,7 @@ int configfs_register_subsystem(struct c
d_add(dentry, NULL);
err = configfs_attach_group(sd->s_element, &group->cg_item,
- dentry);
+ dentry, frag);
if (err) {
BUG_ON(d_inode(dentry));
d_drop(dentry);
@@ -1889,6 +1947,7 @@ int configfs_register_subsystem(struct c
unlink_group(group);
configfs_release_fs();
}
+ put_fragment(frag);
return err;
}
--- a/fs/configfs/file.c
+++ b/fs/configfs/file.c
@@ -502,7 +502,7 @@ int configfs_create_file(struct config_i
inode_lock_nested(d_inode(dir), I_MUTEX_NORMAL);
error = configfs_make_dirent(parent_sd, NULL, (void *) attr, mode,
- CONFIGFS_ITEM_ATTR);
+ CONFIGFS_ITEM_ATTR, parent_sd->s_frag);
inode_unlock(d_inode(dir));
return error;
@@ -524,7 +524,7 @@ int configfs_create_bin_file(struct conf
inode_lock_nested(dir->d_inode, I_MUTEX_NORMAL);
error = configfs_make_dirent(parent_sd, NULL, (void *) bin_attr, mode,
- CONFIGFS_ITEM_BIN_ATTR);
+ CONFIGFS_ITEM_BIN_ATTR, parent_sd->s_frag);
inode_unlock(dir->d_inode);
return error;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 055/125] configfs: provide exclusion between IO and removals
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (53 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 054/125] configfs: new object reprsenting tree fragments Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 056/125] configfs: fix a deadlock in configfs_symlink() Greg Kroah-Hartman
` (73 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Al Viro, Christoph Hellwig
From: Al Viro <viro@zeniv.linux.org.uk>
commit b0841eefd9693827afb9888235e26ddd098f9cef upstream.
Make sure that attribute methods are not called after the item
has been removed from the tree. To do so, we
* at the point of no return in removals, grab ->frag_sem
exclusive and mark the fragment dead.
* call the methods of attributes with ->frag_sem taken
shared and only after having verified that the fragment is still
alive.
The main benefit is for method instances - they are
guaranteed that the objects they are accessing *and* all ancestors
are still there. Another win is that we don't need to bother
with extra refcount on config_item when opening a file -
the item will be alive for as long as it stays in the tree, and
we won't touch it/attributes/any associated data after it's
been removed from the tree.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/configfs/dir.c | 23 ++++++++++++++++
fs/configfs/file.c | 75 ++++++++++++++++++++++++++++++++++++++++-------------
2 files changed, 80 insertions(+), 18 deletions(-)
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -1474,6 +1474,7 @@ static int configfs_rmdir(struct inode *
struct config_item *item;
struct configfs_subsystem *subsys;
struct configfs_dirent *sd;
+ struct configfs_fragment *frag;
struct module *subsys_owner = NULL, *dead_item_owner = NULL;
int ret;
@@ -1531,6 +1532,16 @@ static int configfs_rmdir(struct inode *
}
} while (ret == -EAGAIN);
+ frag = sd->s_frag;
+ if (down_write_killable(&frag->frag_sem)) {
+ spin_lock(&configfs_dirent_lock);
+ configfs_detach_rollback(dentry);
+ spin_unlock(&configfs_dirent_lock);
+ return -EINTR;
+ }
+ frag->frag_dead = true;
+ up_write(&frag->frag_sem);
+
/* Get a working ref for the duration of this function */
item = configfs_get_config_item(dentry);
@@ -1832,6 +1843,12 @@ void configfs_unregister_group(struct co
struct configfs_subsystem *subsys = group->cg_subsys;
struct dentry *dentry = group->cg_item.ci_dentry;
struct dentry *parent = group->cg_item.ci_parent->ci_dentry;
+ struct configfs_dirent *sd = dentry->d_fsdata;
+ struct configfs_fragment *frag = sd->s_frag;
+
+ down_write(&frag->frag_sem);
+ frag->frag_dead = true;
+ up_write(&frag->frag_sem);
inode_lock_nested(d_inode(parent), I_MUTEX_PARENT);
spin_lock(&configfs_dirent_lock);
@@ -1957,12 +1974,18 @@ void configfs_unregister_subsystem(struc
struct config_group *group = &subsys->su_group;
struct dentry *dentry = group->cg_item.ci_dentry;
struct dentry *root = dentry->d_sb->s_root;
+ struct configfs_dirent *sd = dentry->d_fsdata;
+ struct configfs_fragment *frag = sd->s_frag;
if (dentry->d_parent != root) {
pr_err("Tried to unregister non-subsystem!\n");
return;
}
+ down_write(&frag->frag_sem);
+ frag->frag_dead = true;
+ up_write(&frag->frag_sem);
+
inode_lock_nested(d_inode(root),
I_MUTEX_PARENT);
inode_lock_nested(d_inode(dentry), I_MUTEX_CHILD);
--- a/fs/configfs/file.c
+++ b/fs/configfs/file.c
@@ -62,22 +62,32 @@ struct configfs_buffer {
};
};
+static inline struct configfs_fragment *to_frag(struct file *file)
+{
+ struct configfs_dirent *sd = file->f_path.dentry->d_fsdata;
+
+ return sd->s_frag;
+}
-static int fill_read_buffer(struct configfs_buffer * buffer)
+static int fill_read_buffer(struct file *file, struct configfs_buffer *buffer)
{
- ssize_t count;
+ struct configfs_fragment *frag = to_frag(file);
+ ssize_t count = -ENOENT;
if (!buffer->page)
buffer->page = (char *) get_zeroed_page(GFP_KERNEL);
if (!buffer->page)
return -ENOMEM;
- count = buffer->attr->show(buffer->item, buffer->page);
+ down_read(&frag->frag_sem);
+ if (!frag->frag_dead)
+ count = buffer->attr->show(buffer->item, buffer->page);
+ up_read(&frag->frag_sem);
+
if (count < 0)
return count;
if (WARN_ON_ONCE(count > (ssize_t)SIMPLE_ATTR_SIZE))
return -EIO;
-
buffer->needs_read_fill = 0;
buffer->count = count;
return 0;
@@ -110,7 +120,7 @@ configfs_read_file(struct file *file, ch
mutex_lock(&buffer->mutex);
if (buffer->needs_read_fill) {
- retval = fill_read_buffer(buffer);
+ retval = fill_read_buffer(file, buffer);
if (retval)
goto out;
}
@@ -147,6 +157,7 @@ static ssize_t
configfs_read_bin_file(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
+ struct configfs_fragment *frag = to_frag(file);
struct configfs_buffer *buffer = file->private_data;
ssize_t retval = 0;
ssize_t len = min_t(size_t, count, PAGE_SIZE);
@@ -162,7 +173,12 @@ configfs_read_bin_file(struct file *file
if (buffer->needs_read_fill) {
/* perform first read with buf == NULL to get extent */
- len = buffer->bin_attr->read(buffer->item, NULL, 0);
+ down_read(&frag->frag_sem);
+ if (!frag->frag_dead)
+ len = buffer->bin_attr->read(buffer->item, NULL, 0);
+ else
+ len = -ENOENT;
+ up_read(&frag->frag_sem);
if (len <= 0) {
retval = len;
goto out;
@@ -182,8 +198,13 @@ configfs_read_bin_file(struct file *file
buffer->bin_buffer_size = len;
/* perform second read to fill buffer */
- len = buffer->bin_attr->read(buffer->item,
- buffer->bin_buffer, len);
+ down_read(&frag->frag_sem);
+ if (!frag->frag_dead)
+ len = buffer->bin_attr->read(buffer->item,
+ buffer->bin_buffer, len);
+ else
+ len = -ENOENT;
+ up_read(&frag->frag_sem);
if (len < 0) {
retval = len;
vfree(buffer->bin_buffer);
@@ -234,9 +255,16 @@ fill_write_buffer(struct configfs_buffer
}
static int
-flush_write_buffer(struct configfs_buffer *buffer, size_t count)
+flush_write_buffer(struct file *file, struct configfs_buffer *buffer, size_t count)
{
- return buffer->attr->store(buffer->item, buffer->page, count);
+ struct configfs_fragment *frag = to_frag(file);
+ int res = -ENOENT;
+
+ down_read(&frag->frag_sem);
+ if (!frag->frag_dead)
+ res = buffer->attr->store(buffer->item, buffer->page, count);
+ up_read(&frag->frag_sem);
+ return res;
}
@@ -266,7 +294,7 @@ configfs_write_file(struct file *file, c
mutex_lock(&buffer->mutex);
len = fill_write_buffer(buffer, buf, count);
if (len > 0)
- len = flush_write_buffer(buffer, len);
+ len = flush_write_buffer(file, buffer, len);
if (len > 0)
*ppos += len;
mutex_unlock(&buffer->mutex);
@@ -342,6 +370,7 @@ out:
static int __configfs_open_file(struct inode *inode, struct file *file, int type)
{
struct dentry *dentry = file->f_path.dentry;
+ struct configfs_fragment *frag = to_frag(file);
struct configfs_attribute *attr;
struct configfs_buffer *buffer;
int error;
@@ -351,8 +380,13 @@ static int __configfs_open_file(struct i
if (!buffer)
goto out;
+ error = -ENOENT;
+ down_read(&frag->frag_sem);
+ if (unlikely(frag->frag_dead))
+ goto out_free_buffer;
+
error = -EINVAL;
- buffer->item = configfs_get_config_item(dentry->d_parent);
+ buffer->item = to_item(dentry->d_parent);
if (!buffer->item)
goto out_free_buffer;
@@ -410,6 +444,7 @@ static int __configfs_open_file(struct i
buffer->read_in_progress = false;
buffer->write_in_progress = false;
file->private_data = buffer;
+ up_read(&frag->frag_sem);
return 0;
out_put_module:
@@ -417,6 +452,7 @@ out_put_module:
out_put_item:
config_item_put(buffer->item);
out_free_buffer:
+ up_read(&frag->frag_sem);
kfree(buffer);
out:
return error;
@@ -426,8 +462,6 @@ static int configfs_release(struct inode
{
struct configfs_buffer *buffer = filp->private_data;
- if (buffer->item)
- config_item_put(buffer->item);
module_put(buffer->owner);
if (buffer->page)
free_page((unsigned long)buffer->page);
@@ -453,12 +487,17 @@ static int configfs_release_bin_file(str
buffer->read_in_progress = false;
if (buffer->write_in_progress) {
+ struct configfs_fragment *frag = to_frag(file);
buffer->write_in_progress = false;
- /* result of ->release() is ignored */
- buffer->bin_attr->write(buffer->item, buffer->bin_buffer,
- buffer->bin_buffer_size);
-
+ down_read(&frag->frag_sem);
+ if (!frag->frag_dead) {
+ /* result of ->release() is ignored */
+ buffer->bin_attr->write(buffer->item,
+ buffer->bin_buffer,
+ buffer->bin_buffer_size);
+ }
+ up_read(&frag->frag_sem);
/* vfree on NULL is safe */
vfree(buffer->bin_buffer);
buffer->bin_buffer = NULL;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 056/125] configfs: fix a deadlock in configfs_symlink()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (54 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 055/125] configfs: provide exclusion between IO and removals Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 057/125] ALSA: usb-audio: More validations of descriptor units Greg Kroah-Hartman
` (72 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Al Viro, Christoph Hellwig
From: Al Viro <viro@zeniv.linux.org.uk>
commit 351e5d869e5ac10cb40c78b5f2d7dfc816ad4587 upstream.
Configfs abuses symlink(2). Unlike the normal filesystems, it
wants the target resolved at symlink(2) time, like link(2) would've
done. The problem is that ->symlink() is called with the parent
directory locked exclusive, so resolving the target inside the
->symlink() is easily deadlocked.
Short of really ugly games in sys_symlink() itself, all we can
do is to unlock the parent before resolving the target and
relock it after. However, that invalidates the checks done
by the caller of ->symlink(), so we have to
* check that dentry is still where it used to be
(it couldn't have been moved, but it could've been unhashed)
* recheck that it's still negative (somebody else
might've successfully created a symlink with the same name
while we were looking the target up)
* recheck the permissions on the parent directory.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/configfs/symlink.c | 33 ++++++++++++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -157,11 +157,42 @@ int configfs_symlink(struct inode *dir,
!type->ct_item_ops->allow_link)
goto out_put;
+ /*
+ * This is really sick. What they wanted was a hybrid of
+ * link(2) and symlink(2) - they wanted the target resolved
+ * at syscall time (as link(2) would've done), be a directory
+ * (which link(2) would've refused to do) *AND* be a deep
+ * fucking magic, making the target busy from rmdir POV.
+ * symlink(2) is nothing of that sort, and the locking it
+ * gets matches the normal symlink(2) semantics. Without
+ * attempts to resolve the target (which might very well
+ * not even exist yet) done prior to locking the parent
+ * directory. This perversion, OTOH, needs to resolve
+ * the target, which would lead to obvious deadlocks if
+ * attempted with any directories locked.
+ *
+ * Unfortunately, that garbage is userland ABI and we should've
+ * said "no" back in 2005. Too late now, so we get to
+ * play very ugly games with locking.
+ *
+ * Try *ANYTHING* of that sort in new code, and you will
+ * really regret it. Just ask yourself - what could a BOFH
+ * do to me and do I want to find it out first-hand?
+ *
+ * AV, a thoroughly annoyed bastard.
+ */
+ inode_unlock(dir);
ret = get_target(symname, &path, &target_item, dentry->d_sb);
+ inode_lock(dir);
if (ret)
goto out_put;
- ret = type->ct_item_ops->allow_link(parent_item, target_item);
+ if (dentry->d_inode || d_unhashed(dentry))
+ ret = -EEXIST;
+ else
+ ret = inode_permission(dir, MAY_WRITE | MAY_EXEC);
+ if (!ret)
+ ret = type->ct_item_ops->allow_link(parent_item, target_item);
if (!ret) {
mutex_lock(&configfs_symlink_mutex);
ret = create_link(parent_item, target_item, dentry);
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 057/125] ALSA: usb-audio: More validations of descriptor units
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (55 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 056/125] configfs: fix a deadlock in configfs_symlink() Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 058/125] ALSA: usb-audio: Simplify parse_audio_unit() Greg Kroah-Hartman
` (71 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 57f8770620e9b51c61089751f0b5ad3dbe376ff2 upstream.
Introduce a new helper to validate each audio descriptor unit before
and check the unit before actually accessing it. This should harden
against the OOB access cases with malformed descriptors that have been
recently frequently reported by fuzzers.
The existing descriptor checks are still kept although they become
superfluous after this patch. They'll be cleaned up eventually
later.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/Makefile | 3
sound/usb/helper.h | 4
sound/usb/mixer.c | 10 +
sound/usb/power.c | 2
sound/usb/quirks.c | 3
sound/usb/stream.c | 25 +--
sound/usb/validate.c | 332 +++++++++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 366 insertions(+), 13 deletions(-)
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -16,7 +16,8 @@ snd-usb-audio-objs := card.o \
power.o \
proc.o \
quirks.o \
- stream.o
+ stream.o \
+ validate.o
snd-usbmidi-lib-objs := midi.o
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -30,4 +30,8 @@ static inline int snd_usb_ctrl_intf(stru
return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber;
}
+/* in validate.c */
+bool snd_usb_validate_audio_desc(void *p, int protocol);
+bool snd_usb_validate_midi_desc(void *p);
+
#endif /* __USBAUDIO_HELPER_H */
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -800,6 +800,8 @@ static int __check_input_term(struct mix
p1 = find_audio_control_unit(state, id);
if (!p1)
break;
+ if (!snd_usb_validate_audio_desc(p1, protocol))
+ break; /* bad descriptor */
hdr = p1;
term->id = id;
@@ -2794,6 +2796,11 @@ static int parse_audio_unit(struct mixer
return -EINVAL;
}
+ if (!snd_usb_validate_audio_desc(p1, protocol)) {
+ usb_audio_dbg(state->chip, "invalid unit %d\n", unitid);
+ return 0; /* skip invalid unit */
+ }
+
if (protocol == UAC_VERSION_1 || protocol == UAC_VERSION_2) {
switch (p1[2]) {
case UAC_INPUT_TERMINAL:
@@ -3164,6 +3171,9 @@ static int snd_usb_mixer_controls(struct
while ((p = snd_usb_find_csint_desc(mixer->hostif->extra,
mixer->hostif->extralen,
p, UAC_OUTPUT_TERMINAL)) != NULL) {
+ if (!snd_usb_validate_audio_desc(p, mixer->protocol))
+ continue; /* skip invalid descriptor */
+
if (mixer->protocol == UAC_VERSION_1) {
struct uac1_output_terminal_descriptor *desc = p;
--- a/sound/usb/power.c
+++ b/sound/usb/power.c
@@ -31,6 +31,8 @@ snd_usb_find_power_domain(struct usb_hos
struct uac3_power_domain_descriptor *pd_desc = p;
int i;
+ if (!snd_usb_validate_audio_desc(p, UAC_VERSION_3))
+ continue;
for (i = 0; i < pd_desc->bNrEntities; i++) {
if (pd_desc->baEntityID[i] == id) {
pd->pd_id = pd_desc->bPowerDomainID;
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -259,6 +259,9 @@ static int create_yamaha_midi_quirk(stru
NULL, USB_MS_MIDI_OUT_JACK);
if (!injd && !outjd)
return -ENODEV;
+ if (!snd_usb_validate_midi_desc(injd) ||
+ !snd_usb_validate_midi_desc(outjd))
+ return -ENODEV;
if (injd && (injd->bLength < 5 ||
(injd->bJackType != USB_MS_EMBEDDED &&
injd->bJackType != USB_MS_EXTERNAL)))
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -637,16 +637,14 @@ static int parse_uac_endpoint_attributes
*/
static void *
snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
- int terminal_id, bool uac23)
+ int terminal_id, int protocol)
{
struct uac2_input_terminal_descriptor *term = NULL;
- size_t minlen = uac23 ? sizeof(struct uac2_input_terminal_descriptor) :
- sizeof(struct uac_input_terminal_descriptor);
while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
ctrl_iface->extralen,
term, UAC_INPUT_TERMINAL))) {
- if (term->bLength < minlen)
+ if (!snd_usb_validate_audio_desc(term, protocol))
continue;
if (term->bTerminalID == terminal_id)
return term;
@@ -657,7 +655,7 @@ snd_usb_find_input_terminal_descriptor(s
static void *
snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
- int terminal_id)
+ int terminal_id, int protocol)
{
/* OK to use with both UAC2 and UAC3 */
struct uac2_output_terminal_descriptor *term = NULL;
@@ -665,8 +663,9 @@ snd_usb_find_output_terminal_descriptor(
while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
ctrl_iface->extralen,
term, UAC_OUTPUT_TERMINAL))) {
- if (term->bLength >= sizeof(*term) &&
- term->bTerminalID == terminal_id)
+ if (!snd_usb_validate_audio_desc(term, protocol))
+ continue;
+ if (term->bTerminalID == terminal_id)
return term;
}
@@ -741,7 +740,7 @@ snd_usb_get_audioformat_uac12(struct snd
iterm = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
as->bTerminalLink,
- false);
+ protocol);
if (iterm) {
num_channels = iterm->bNrChannels;
chconfig = le16_to_cpu(iterm->wChannelConfig);
@@ -777,7 +776,7 @@ snd_usb_get_audioformat_uac12(struct snd
*/
input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
as->bTerminalLink,
- true);
+ protocol);
if (input_term) {
clock = input_term->bCSourceID;
if (!chconfig && (num_channels == input_term->bNrChannels))
@@ -786,7 +785,8 @@ snd_usb_get_audioformat_uac12(struct snd
}
output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
- as->bTerminalLink);
+ as->bTerminalLink,
+ protocol);
if (output_term) {
clock = output_term->bCSourceID;
goto found_clock;
@@ -1012,14 +1012,15 @@ snd_usb_get_audioformat_uac3(struct snd_
*/
input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
as->bTerminalLink,
- true);
+ UAC_VERSION_3);
if (input_term) {
clock = input_term->bCSourceID;
goto found_clock;
}
output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
- as->bTerminalLink);
+ as->bTerminalLink,
+ UAC_VERSION_3);
if (output_term) {
clock = output_term->bCSourceID;
goto found_clock;
--- /dev/null
+++ b/sound/usb/validate.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Validation of USB-audio class descriptors
+//
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+#include <linux/usb/audio-v3.h>
+#include <linux/usb/midi.h>
+#include "usbaudio.h"
+#include "helper.h"
+
+struct usb_desc_validator {
+ unsigned char protocol;
+ unsigned char type;
+ bool (*func)(const void *p, const struct usb_desc_validator *v);
+ size_t size;
+};
+
+#define UAC_VERSION_ALL (unsigned char)(-1)
+
+/* UAC1 only */
+static bool validate_uac1_header(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac1_ac_header_descriptor *d = p;
+
+ return d->bLength >= sizeof(*d) &&
+ d->bLength >= sizeof(*d) + d->bInCollection;
+}
+
+/* for mixer unit; covering all UACs */
+static bool validate_mixer_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac_mixer_unit_descriptor *d = p;
+ size_t len;
+
+ if (d->bLength < sizeof(*d) || !d->bNrInPins)
+ return false;
+ len = sizeof(*d) + d->bNrInPins;
+ /* We can't determine the bitmap size only from this unit descriptor,
+ * so just check with the remaining length.
+ * The actual bitmap is checked at mixer unit parser.
+ */
+ switch (v->protocol) {
+ case UAC_VERSION_1:
+ default:
+ len += 2 + 1; /* wChannelConfig, iChannelNames */
+ /* bmControls[n*m] */
+ len += 1; /* iMixer */
+ break;
+ case UAC_VERSION_2:
+ len += 4 + 1; /* bmChannelConfig, iChannelNames */
+ /* bmMixerControls[n*m] */
+ len += 1 + 1; /* bmControls, iMixer */
+ break;
+ case UAC_VERSION_3:
+ len += 2; /* wClusterDescrID */
+ /* bmMixerControls[n*m] */
+ break;
+ }
+ return d->bLength >= len;
+}
+
+/* both for processing and extension units; covering all UACs */
+static bool validate_processing_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac_processing_unit_descriptor *d = p;
+ const unsigned char *hdr = p;
+ size_t len, m;
+
+ if (d->bLength < sizeof(*d))
+ return false;
+ len = d->bLength < sizeof(*d) + d->bNrInPins;
+ if (d->bLength < len)
+ return false;
+ switch (v->protocol) {
+ case UAC_VERSION_1:
+ default:
+ /* bNrChannels, wChannelConfig, iChannelNames, bControlSize */
+ len += 1 + 2 + 1 + 1;
+ if (d->bLength < len) /* bControlSize */
+ return false;
+ m = hdr[len];
+ len += 1 + m + 1; /* bControlSize, bmControls, iProcessing */
+ break;
+ case UAC_VERSION_2:
+ /* bNrChannels, bmChannelConfig, iChannelNames */
+ len += 1 + 4 + 1;
+ if (v->type == UAC2_PROCESSING_UNIT_V2)
+ len += 2; /* bmControls -- 2 bytes for PU */
+ else
+ len += 1; /* bmControls -- 1 byte for EU */
+ len += 1; /* iProcessing */
+ break;
+ case UAC_VERSION_3:
+ /* wProcessingDescrStr, bmControls */
+ len += 2 + 4;
+ break;
+ }
+ if (d->bLength < len)
+ return false;
+
+ switch (v->protocol) {
+ case UAC_VERSION_1:
+ default:
+ if (v->type == UAC1_EXTENSION_UNIT)
+ return true; /* OK */
+ switch (d->wProcessType) {
+ case UAC_PROCESS_UP_DOWNMIX:
+ case UAC_PROCESS_DOLBY_PROLOGIC:
+ if (d->bLength < len + 1) /* bNrModes */
+ return false;
+ m = hdr[len];
+ len += 1 + m * 2; /* bNrModes, waModes(n) */
+ break;
+ default:
+ break;
+ }
+ break;
+ case UAC_VERSION_2:
+ if (v->type == UAC2_EXTENSION_UNIT_V2)
+ return true; /* OK */
+ switch (d->wProcessType) {
+ case UAC2_PROCESS_UP_DOWNMIX:
+ case UAC2_PROCESS_DOLBY_PROLOCIC: /* SiC! */
+ if (d->bLength < len + 1) /* bNrModes */
+ return false;
+ m = hdr[len];
+ len += 1 + m * 4; /* bNrModes, daModes(n) */
+ break;
+ default:
+ break;
+ }
+ break;
+ case UAC_VERSION_3:
+ if (v->type == UAC3_EXTENSION_UNIT) {
+ len += 2; /* wClusterDescrID */
+ break;
+ }
+ switch (d->wProcessType) {
+ case UAC3_PROCESS_UP_DOWNMIX:
+ if (d->bLength < len + 1) /* bNrModes */
+ return false;
+ m = hdr[len];
+ len += 1 + m * 2; /* bNrModes, waClusterDescrID(n) */
+ break;
+ case UAC3_PROCESS_MULTI_FUNCTION:
+ len += 2 + 4; /* wClusterDescrID, bmAlgorighms */
+ break;
+ default:
+ break;
+ }
+ break;
+ }
+ if (d->bLength < len)
+ return false;
+
+ return true;
+}
+
+/* both for selector and clock selector units; covering all UACs */
+static bool validate_selector_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac_selector_unit_descriptor *d = p;
+ size_t len;
+
+ if (d->bLength < sizeof(*d))
+ return false;
+ len = sizeof(*d) + d->bNrInPins;
+ switch (v->protocol) {
+ case UAC_VERSION_1:
+ default:
+ len += 1; /* iSelector */
+ break;
+ case UAC_VERSION_2:
+ len += 1 + 1; /* bmControls, iSelector */
+ break;
+ case UAC_VERSION_3:
+ len += 4 + 2; /* bmControls, wSelectorDescrStr */
+ break;
+ }
+ return d->bLength >= len;
+}
+
+static bool validate_uac1_feature_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac_feature_unit_descriptor *d = p;
+
+ if (d->bLength < sizeof(*d) || !d->bControlSize)
+ return false;
+ /* at least bmaControls(0) for master channel + iFeature */
+ return d->bLength >= sizeof(*d) + d->bControlSize + 1;
+}
+
+static bool validate_uac2_feature_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac2_feature_unit_descriptor *d = p;
+
+ if (d->bLength < sizeof(*d))
+ return false;
+ /* at least bmaControls(0) for master channel + iFeature */
+ return d->bLength >= sizeof(*d) + 4 + 1;
+}
+
+static bool validate_uac3_feature_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac3_feature_unit_descriptor *d = p;
+
+ if (d->bLength < sizeof(*d))
+ return false;
+ /* at least bmaControls(0) for master channel + wFeatureDescrStr */
+ return d->bLength >= sizeof(*d) + 4 + 2;
+}
+
+static bool validate_midi_out_jack(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct usb_midi_out_jack_descriptor *d = p;
+
+ return d->bLength >= sizeof(*d) &&
+ d->bLength >= sizeof(*d) + d->bNrInputPins * 2;
+}
+
+#define FIXED(p, t, s) { .protocol = (p), .type = (t), .size = sizeof(s) }
+#define FUNC(p, t, f) { .protocol = (p), .type = (t), .func = (f) }
+
+static struct usb_desc_validator audio_validators[] = {
+ /* UAC1 */
+ FUNC(UAC_VERSION_1, UAC_HEADER, validate_uac1_header),
+ FIXED(UAC_VERSION_1, UAC_INPUT_TERMINAL,
+ struct uac_input_terminal_descriptor),
+ FIXED(UAC_VERSION_1, UAC_OUTPUT_TERMINAL,
+ struct uac1_output_terminal_descriptor),
+ FUNC(UAC_VERSION_1, UAC_MIXER_UNIT, validate_mixer_unit),
+ FUNC(UAC_VERSION_1, UAC_SELECTOR_UNIT, validate_selector_unit),
+ FUNC(UAC_VERSION_1, UAC_FEATURE_UNIT, validate_uac1_feature_unit),
+ FUNC(UAC_VERSION_1, UAC1_PROCESSING_UNIT, validate_processing_unit),
+ FUNC(UAC_VERSION_1, UAC1_EXTENSION_UNIT, validate_processing_unit),
+
+ /* UAC2 */
+ FIXED(UAC_VERSION_2, UAC_HEADER, struct uac2_ac_header_descriptor),
+ FIXED(UAC_VERSION_2, UAC_INPUT_TERMINAL,
+ struct uac2_input_terminal_descriptor),
+ FIXED(UAC_VERSION_2, UAC_OUTPUT_TERMINAL,
+ struct uac2_output_terminal_descriptor),
+ FUNC(UAC_VERSION_2, UAC_MIXER_UNIT, validate_mixer_unit),
+ FUNC(UAC_VERSION_2, UAC_SELECTOR_UNIT, validate_selector_unit),
+ FUNC(UAC_VERSION_2, UAC_FEATURE_UNIT, validate_uac2_feature_unit),
+ /* UAC_VERSION_2, UAC2_EFFECT_UNIT: not implemented yet */
+ FUNC(UAC_VERSION_2, UAC2_PROCESSING_UNIT_V2, validate_processing_unit),
+ FUNC(UAC_VERSION_2, UAC2_EXTENSION_UNIT_V2, validate_processing_unit),
+ FIXED(UAC_VERSION_2, UAC2_CLOCK_SOURCE,
+ struct uac_clock_source_descriptor),
+ FUNC(UAC_VERSION_2, UAC2_CLOCK_SELECTOR, validate_selector_unit),
+ FIXED(UAC_VERSION_2, UAC2_CLOCK_MULTIPLIER,
+ struct uac_clock_multiplier_descriptor),
+ /* UAC_VERSION_2, UAC2_SAMPLE_RATE_CONVERTER: not implemented yet */
+
+ /* UAC3 */
+ FIXED(UAC_VERSION_2, UAC_HEADER, struct uac3_ac_header_descriptor),
+ FIXED(UAC_VERSION_3, UAC_INPUT_TERMINAL,
+ struct uac3_input_terminal_descriptor),
+ FIXED(UAC_VERSION_3, UAC_OUTPUT_TERMINAL,
+ struct uac3_output_terminal_descriptor),
+ /* UAC_VERSION_3, UAC3_EXTENDED_TERMINAL: not implemented yet */
+ FUNC(UAC_VERSION_3, UAC3_MIXER_UNIT, validate_mixer_unit),
+ FUNC(UAC_VERSION_3, UAC3_SELECTOR_UNIT, validate_selector_unit),
+ FUNC(UAC_VERSION_3, UAC_FEATURE_UNIT, validate_uac3_feature_unit),
+ /* UAC_VERSION_3, UAC3_EFFECT_UNIT: not implemented yet */
+ FUNC(UAC_VERSION_3, UAC3_PROCESSING_UNIT, validate_processing_unit),
+ FUNC(UAC_VERSION_3, UAC3_EXTENSION_UNIT, validate_processing_unit),
+ FIXED(UAC_VERSION_3, UAC3_CLOCK_SOURCE,
+ struct uac3_clock_source_descriptor),
+ FUNC(UAC_VERSION_3, UAC3_CLOCK_SELECTOR, validate_selector_unit),
+ FIXED(UAC_VERSION_3, UAC3_CLOCK_MULTIPLIER,
+ struct uac3_clock_multiplier_descriptor),
+ /* UAC_VERSION_3, UAC3_SAMPLE_RATE_CONVERTER: not implemented yet */
+ /* UAC_VERSION_3, UAC3_CONNECTORS: not implemented yet */
+ { } /* terminator */
+};
+
+static struct usb_desc_validator midi_validators[] = {
+ FIXED(UAC_VERSION_ALL, USB_MS_HEADER,
+ struct usb_ms_header_descriptor),
+ FIXED(UAC_VERSION_ALL, USB_MS_MIDI_IN_JACK,
+ struct usb_midi_in_jack_descriptor),
+ FUNC(UAC_VERSION_ALL, USB_MS_MIDI_OUT_JACK,
+ validate_midi_out_jack),
+ { } /* terminator */
+};
+
+
+/* Validate the given unit descriptor, return true if it's OK */
+static bool validate_desc(unsigned char *hdr, int protocol,
+ const struct usb_desc_validator *v)
+{
+ if (hdr[1] != USB_DT_CS_INTERFACE)
+ return true; /* don't care */
+
+ for (; v->type; v++) {
+ if (v->type == hdr[2] &&
+ (v->protocol == UAC_VERSION_ALL ||
+ v->protocol == protocol)) {
+ if (v->func)
+ return v->func(hdr, v);
+ /* check for the fixed size */
+ return hdr[0] >= v->size;
+ }
+ }
+
+ return true; /* not matching, skip validation */
+}
+
+bool snd_usb_validate_audio_desc(void *p, int protocol)
+{
+ return validate_desc(p, protocol, audio_validators);
+}
+
+bool snd_usb_validate_midi_desc(void *p)
+{
+ return validate_desc(p, UAC_VERSION_1, midi_validators);
+}
+
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 058/125] ALSA: usb-audio: Simplify parse_audio_unit()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (56 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 057/125] ALSA: usb-audio: More validations of descriptor units Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 059/125] ALSA: usb-audio: Unify the release of usb_mixer_elem_info objects Greg Kroah-Hartman
` (70 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 68e9fde245591d18200f8a9054cac22339437adb upstream.
Minor code refactoring by combining the UAC version and the type in
the switch-case flow, so that we reduce the indentation and
redundancy. One good bonus is that the duplicated definition of the
same type value (e.g. UAC2_EFFECT_UNIT) can be handled more cleanly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer.c | 95 ++++++++++++++++++++++--------------------------------
1 file changed, 39 insertions(+), 56 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2801,62 +2801,45 @@ static int parse_audio_unit(struct mixer
return 0; /* skip invalid unit */
}
- if (protocol == UAC_VERSION_1 || protocol == UAC_VERSION_2) {
- switch (p1[2]) {
- case UAC_INPUT_TERMINAL:
- return parse_audio_input_terminal(state, unitid, p1);
- case UAC_MIXER_UNIT:
- return parse_audio_mixer_unit(state, unitid, p1);
- case UAC2_CLOCK_SOURCE:
- return parse_clock_source_unit(state, unitid, p1);
- case UAC_SELECTOR_UNIT:
- case UAC2_CLOCK_SELECTOR:
- return parse_audio_selector_unit(state, unitid, p1);
- case UAC_FEATURE_UNIT:
- return parse_audio_feature_unit(state, unitid, p1);
- case UAC1_PROCESSING_UNIT:
- /* UAC2_EFFECT_UNIT has the same value */
- if (protocol == UAC_VERSION_1)
- return parse_audio_processing_unit(state, unitid, p1);
- else
- return 0; /* FIXME - effect units not implemented yet */
- case UAC1_EXTENSION_UNIT:
- /* UAC2_PROCESSING_UNIT_V2 has the same value */
- if (protocol == UAC_VERSION_1)
- return parse_audio_extension_unit(state, unitid, p1);
- else /* UAC_VERSION_2 */
- return parse_audio_processing_unit(state, unitid, p1);
- case UAC2_EXTENSION_UNIT_V2:
- return parse_audio_extension_unit(state, unitid, p1);
- default:
- usb_audio_err(state->chip,
- "unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
- return -EINVAL;
- }
- } else { /* UAC_VERSION_3 */
- switch (p1[2]) {
- case UAC_INPUT_TERMINAL:
- return parse_audio_input_terminal(state, unitid, p1);
- case UAC3_MIXER_UNIT:
- return parse_audio_mixer_unit(state, unitid, p1);
- case UAC3_CLOCK_SOURCE:
- return parse_clock_source_unit(state, unitid, p1);
- case UAC3_SELECTOR_UNIT:
- case UAC3_CLOCK_SELECTOR:
- return parse_audio_selector_unit(state, unitid, p1);
- case UAC3_FEATURE_UNIT:
- return parse_audio_feature_unit(state, unitid, p1);
- case UAC3_EFFECT_UNIT:
- return 0; /* FIXME - effect units not implemented yet */
- case UAC3_PROCESSING_UNIT:
- return parse_audio_processing_unit(state, unitid, p1);
- case UAC3_EXTENSION_UNIT:
- return parse_audio_extension_unit(state, unitid, p1);
- default:
- usb_audio_err(state->chip,
- "unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
- return -EINVAL;
- }
+#define PTYPE(a, b) ((a) << 8 | (b))
+ switch (PTYPE(protocol, p1[2])) {
+ case PTYPE(UAC_VERSION_1, UAC_INPUT_TERMINAL):
+ case PTYPE(UAC_VERSION_2, UAC_INPUT_TERMINAL):
+ case PTYPE(UAC_VERSION_3, UAC_INPUT_TERMINAL):
+ return parse_audio_input_terminal(state, unitid, p1);
+ case PTYPE(UAC_VERSION_1, UAC_MIXER_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_MIXER_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_MIXER_UNIT):
+ return parse_audio_mixer_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_2, UAC2_CLOCK_SOURCE):
+ case PTYPE(UAC_VERSION_3, UAC3_CLOCK_SOURCE):
+ return parse_clock_source_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_1, UAC_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_CLOCK_SELECTOR):
+ case PTYPE(UAC_VERSION_3, UAC3_CLOCK_SELECTOR):
+ return parse_audio_selector_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_1, UAC_FEATURE_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_FEATURE_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_FEATURE_UNIT):
+ return parse_audio_feature_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_1, UAC1_PROCESSING_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_PROCESSING_UNIT_V2):
+ case PTYPE(UAC_VERSION_3, UAC3_PROCESSING_UNIT):
+ return parse_audio_processing_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_1, UAC1_EXTENSION_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_EXTENSION_UNIT_V2):
+ case PTYPE(UAC_VERSION_3, UAC3_EXTENSION_UNIT):
+ return parse_audio_extension_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_2, UAC2_EFFECT_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_EFFECT_UNIT):
+ return 0; /* FIXME - effect units not implemented yet */
+ default:
+ usb_audio_err(state->chip,
+ "unit %u: unexpected type 0x%02x\n",
+ unitid, p1[2]);
+ return -EINVAL;
}
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 059/125] ALSA: usb-audio: Unify the release of usb_mixer_elem_info objects
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (57 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 058/125] ALSA: usb-audio: Simplify parse_audio_unit() Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 060/125] ALSA: usb-audio: Remove superfluous bLength checks Greg Kroah-Hartman
` (69 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 52c3e317a857091fd746e15179a637f32be4d337 upstream.
Instead of the direct kfree() calls, introduce a new local helper to
release the usb_mixer_elem_info object. This will be extended to do
more than a single kfree() in the later patches.
Also, use the standard goto instead of multiple calls in
parse_audio_selector_unit() error paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer.c | 48 ++++++++++++++++++++++++++++--------------------
1 file changed, 28 insertions(+), 20 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1041,10 +1041,15 @@ static struct usb_feature_control_info a
{ UAC2_FU_PHASE_INVERTER, "Phase Inverter Control", USB_MIXER_BOOLEAN, -1 },
};
+static void usb_mixer_elem_info_free(struct usb_mixer_elem_info *cval)
+{
+ kfree(cval);
+}
+
/* private_free callback */
void snd_usb_mixer_elem_free(struct snd_kcontrol *kctl)
{
- kfree(kctl->private_data);
+ usb_mixer_elem_info_free(kctl->private_data);
kctl->private_data = NULL;
}
@@ -1567,7 +1572,7 @@ static void __build_feature_ctl(struct u
ctl_info = get_feature_control_info(control);
if (!ctl_info) {
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return;
}
if (mixer->protocol == UAC_VERSION_1)
@@ -1600,7 +1605,7 @@ static void __build_feature_ctl(struct u
if (!kctl) {
usb_audio_err(mixer->chip, "cannot malloc kcontrol\n");
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return;
}
kctl->private_free = snd_usb_mixer_elem_free;
@@ -1770,7 +1775,7 @@ static void build_connector_control(stru
kctl = snd_ctl_new1(&usb_connector_ctl_ro, cval);
if (!kctl) {
usb_audio_err(mixer->chip, "cannot malloc kcontrol\n");
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return;
}
get_connector_control_name(mixer, term, is_input, kctl->id.name,
@@ -1823,7 +1828,7 @@ static int parse_clock_source_unit(struc
kctl = snd_ctl_new1(&usb_bool_master_control_ctl_ro, cval);
if (!kctl) {
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return -ENOMEM;
}
@@ -2089,7 +2094,7 @@ static void build_mixer_unit_ctl(struct
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
if (!kctl) {
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return;
}
kctl->private_free = snd_usb_mixer_elem_free;
@@ -2487,7 +2492,7 @@ static int build_audio_procunit(struct m
kctl = snd_ctl_new1(&mixer_procunit_ctl, cval);
if (!kctl) {
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return -ENOMEM;
}
kctl->private_free = snd_usb_mixer_elem_free;
@@ -2625,7 +2630,7 @@ static void usb_mixer_selector_elem_free
if (kctl->private_data) {
struct usb_mixer_elem_info *cval = kctl->private_data;
num_ins = cval->max;
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
kctl->private_data = NULL;
}
if (kctl->private_value) {
@@ -2697,10 +2702,10 @@ static int parse_audio_selector_unit(str
break;
}
- namelist = kmalloc_array(desc->bNrInPins, sizeof(char *), GFP_KERNEL);
+ namelist = kcalloc(desc->bNrInPins, sizeof(char *), GFP_KERNEL);
if (!namelist) {
- kfree(cval);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto error_cval;
}
#define MAX_ITEM_NAME_LEN 64
for (i = 0; i < desc->bNrInPins; i++) {
@@ -2708,11 +2713,8 @@ static int parse_audio_selector_unit(str
len = 0;
namelist[i] = kmalloc(MAX_ITEM_NAME_LEN, GFP_KERNEL);
if (!namelist[i]) {
- while (i--)
- kfree(namelist[i]);
- kfree(namelist);
- kfree(cval);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto error_name;
}
len = check_mapped_selector_name(state, unitid, i, namelist[i],
MAX_ITEM_NAME_LEN);
@@ -2726,10 +2728,8 @@ static int parse_audio_selector_unit(str
kctl = snd_ctl_new1(&mixer_selectunit_ctl, cval);
if (! kctl) {
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
- for (i = 0; i < desc->bNrInPins; i++)
- kfree(namelist[i]);
- kfree(namelist);
- kfree(cval);
+ err = -ENOMEM;
+ goto error_name;
return -ENOMEM;
}
kctl->private_value = (unsigned long)namelist;
@@ -2776,6 +2776,14 @@ static int parse_audio_selector_unit(str
usb_audio_dbg(state->chip, "[%d] SU [%s] items = %d\n",
cval->head.id, kctl->id.name, desc->bNrInPins);
return snd_usb_mixer_add_control(&cval->head, kctl);
+
+ error_name:
+ for (i = 0; i < desc->bNrInPins; i++)
+ kfree(namelist[i]);
+ kfree(namelist);
+ error_cval:
+ usb_mixer_elem_info_free(cval);
+ return err;
}
/*
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 060/125] ALSA: usb-audio: Remove superfluous bLength checks
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (58 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 059/125] ALSA: usb-audio: Unify the release of usb_mixer_elem_info objects Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 061/125] ALSA: usb-audio: Clean up check_input_term() Greg Kroah-Hartman
` (68 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit b8e4f1fdfa422398c2d6c47bfb7d1feb3046d70a upstream.
Now that we got the more comprehensive validation code for USB-audio
descriptors, the check of overflow in each descriptor unit parser
became superfluous. Drop some of the obvious cases.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/clock.c | 14 +++------
sound/usb/mixer.c | 84 ------------------------------------------------------
2 files changed, 6 insertions(+), 92 deletions(-)
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -52,39 +52,37 @@ static void *find_uac_clock_desc(struct
static bool validate_clock_source_v2(void *p, int id)
{
struct uac_clock_source_descriptor *cs = p;
- return cs->bLength == sizeof(*cs) && cs->bClockID == id;
+ return cs->bClockID == id;
}
static bool validate_clock_source_v3(void *p, int id)
{
struct uac3_clock_source_descriptor *cs = p;
- return cs->bLength == sizeof(*cs) && cs->bClockID == id;
+ return cs->bClockID == id;
}
static bool validate_clock_selector_v2(void *p, int id)
{
struct uac_clock_selector_descriptor *cs = p;
- return cs->bLength >= sizeof(*cs) && cs->bClockID == id &&
- cs->bLength == 7 + cs->bNrInPins;
+ return cs->bClockID == id;
}
static bool validate_clock_selector_v3(void *p, int id)
{
struct uac3_clock_selector_descriptor *cs = p;
- return cs->bLength >= sizeof(*cs) && cs->bClockID == id &&
- cs->bLength == 11 + cs->bNrInPins;
+ return cs->bClockID == id;
}
static bool validate_clock_multiplier_v2(void *p, int id)
{
struct uac_clock_multiplier_descriptor *cs = p;
- return cs->bLength == sizeof(*cs) && cs->bClockID == id;
+ return cs->bClockID == id;
}
static bool validate_clock_multiplier_v3(void *p, int id)
{
struct uac3_clock_multiplier_descriptor *cs = p;
- return cs->bLength == sizeof(*cs) && cs->bClockID == id;
+ return cs->bClockID == id;
}
#define DEFINE_FIND_HELPER(name, obj, validator, type) \
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -755,13 +755,6 @@ static int uac_mixer_unit_get_channels(s
{
int mu_channels;
- if (desc->bLength < sizeof(*desc))
- return -EINVAL;
- if (!desc->bNrInPins)
- return -EINVAL;
- if (desc->bLength < sizeof(*desc) + desc->bNrInPins)
- return -EINVAL;
-
switch (state->mixer->protocol) {
case UAC_VERSION_1:
case UAC_VERSION_2:
@@ -1796,13 +1789,6 @@ static int parse_clock_source_unit(struc
if (state->mixer->protocol != UAC_VERSION_2)
return -EINVAL;
- if (hdr->bLength != sizeof(*hdr)) {
- usb_audio_dbg(state->chip,
- "Bogus clock source descriptor length of %d, ignoring.\n",
- hdr->bLength);
- return 0;
- }
-
/*
* The only property of this unit we are interested in is the
* clock source validity. If that isn't readable, just bail out.
@@ -1861,62 +1847,20 @@ static int parse_audio_feature_unit(stru
__u8 *bmaControls;
if (state->mixer->protocol == UAC_VERSION_1) {
- if (hdr->bLength < 7) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
csize = hdr->bControlSize;
- if (!csize) {
- usb_audio_dbg(state->chip,
- "unit %u: invalid bControlSize == 0\n",
- unitid);
- return -EINVAL;
- }
channels = (hdr->bLength - 7) / csize - 1;
bmaControls = hdr->bmaControls;
- if (hdr->bLength < 7 + csize) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
} else if (state->mixer->protocol == UAC_VERSION_2) {
struct uac2_feature_unit_descriptor *ftr = _ftr;
- if (hdr->bLength < 6) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
csize = 4;
channels = (hdr->bLength - 6) / 4 - 1;
bmaControls = ftr->bmaControls;
- if (hdr->bLength < 6 + csize) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
} else { /* UAC_VERSION_3 */
struct uac3_feature_unit_descriptor *ftr = _ftr;
- if (hdr->bLength < 7) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC3_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
csize = 4;
channels = (ftr->bLength - 7) / 4 - 1;
bmaControls = ftr->bmaControls;
- if (hdr->bLength < 7 + csize) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC3_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
}
/* parse the source unit */
@@ -2120,15 +2064,11 @@ static int parse_audio_input_terminal(st
if (state->mixer->protocol == UAC_VERSION_2) {
struct uac2_input_terminal_descriptor *d_v2 = raw_desc;
- if (d_v2->bLength < sizeof(*d_v2))
- return -EINVAL;
control = UAC2_TE_CONNECTOR;
term_id = d_v2->bTerminalID;
bmctls = le16_to_cpu(d_v2->bmControls);
} else if (state->mixer->protocol == UAC_VERSION_3) {
struct uac3_input_terminal_descriptor *d_v3 = raw_desc;
- if (d_v3->bLength < sizeof(*d_v3))
- return -EINVAL;
control = UAC3_TE_INSERTION;
term_id = d_v3->bTerminalID;
bmctls = le32_to_cpu(d_v3->bmControls);
@@ -2390,18 +2330,7 @@ static int build_audio_procunit(struct m
const char *name = extension_unit ?
"Extension Unit" : "Processing Unit";
- if (desc->bLength < 13) {
- usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid);
- return -EINVAL;
- }
-
num_ins = desc->bNrInPins;
- if (desc->bLength < 13 + num_ins ||
- desc->bLength < num_ins + uac_processing_unit_bControlSize(desc, state->mixer->protocol)) {
- usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid);
- return -EINVAL;
- }
-
for (i = 0; i < num_ins; i++) {
err = parse_audio_unit(state, desc->baSourceID[i]);
if (err < 0)
@@ -2656,13 +2585,6 @@ static int parse_audio_selector_unit(str
const struct usbmix_name_map *map;
char **namelist;
- if (desc->bLength < 5 || !desc->bNrInPins ||
- desc->bLength < 5 + desc->bNrInPins) {
- usb_audio_err(state->chip,
- "invalid SELECTOR UNIT descriptor %d\n", unitid);
- return -EINVAL;
- }
-
for (i = 0; i < desc->bNrInPins; i++) {
err = parse_audio_unit(state, desc->baSourceID[i]);
if (err < 0)
@@ -3168,8 +3090,6 @@ static int snd_usb_mixer_controls(struct
if (mixer->protocol == UAC_VERSION_1) {
struct uac1_output_terminal_descriptor *desc = p;
- if (desc->bLength < sizeof(*desc))
- continue; /* invalid descriptor? */
/* mark terminal ID as visited */
set_bit(desc->bTerminalID, state.unitbitmap);
state.oterm.id = desc->bTerminalID;
@@ -3181,8 +3101,6 @@ static int snd_usb_mixer_controls(struct
} else if (mixer->protocol == UAC_VERSION_2) {
struct uac2_output_terminal_descriptor *desc = p;
- if (desc->bLength < sizeof(*desc))
- continue; /* invalid descriptor? */
/* mark terminal ID as visited */
set_bit(desc->bTerminalID, state.unitbitmap);
state.oterm.id = desc->bTerminalID;
@@ -3208,8 +3126,6 @@ static int snd_usb_mixer_controls(struct
} else { /* UAC_VERSION_3 */
struct uac3_output_terminal_descriptor *desc = p;
- if (desc->bLength < sizeof(*desc))
- continue; /* invalid descriptor? */
/* mark terminal ID as visited */
set_bit(desc->bTerminalID, state.unitbitmap);
state.oterm.id = desc->bTerminalID;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 061/125] ALSA: usb-audio: Clean up check_input_term()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (59 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 060/125] ALSA: usb-audio: Remove superfluous bLength checks Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 062/125] ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk() Greg Kroah-Hartman
` (67 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit e0ccdef92653f8867e2d1667facfd3c23699f540 upstream.
The primary changes in this patch are cleanups of __check_input_term()
and move to a non-nested switch-case block by evaluating the pair of
UAC version and the unit type, as we've done for parse_audio_unit().
Also each parser is split into the function for readability.
Now, a slight behavior change by this cleanup is the handling of
processing and extension units. Formerly we've dealt with them
differently between UAC1/2 and UAC3; the latter returns an error if no
input sources are available, while the former continues to parse.
In this patch, unify the behavior in all cases: when input sources are
available, it parses recursively, then override the type and the id,
as well as channel information if not provided yet.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer.c | 407 ++++++++++++++++++++++++++++--------------------------
1 file changed, 212 insertions(+), 195 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -773,224 +773,242 @@ static int uac_mixer_unit_get_channels(s
}
/*
- * parse the source unit recursively until it reaches to a terminal
- * or a branched unit.
+ * Parse Input Terminal Unit
*/
static int __check_input_term(struct mixer_build *state, int id,
- struct usb_audio_term *term)
+ struct usb_audio_term *term);
+
+static int parse_term_uac1_iterm_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac_input_terminal_descriptor *d = p1;
+
+ term->type = le16_to_cpu(d->wTerminalType);
+ term->channels = d->bNrChannels;
+ term->chconfig = le16_to_cpu(d->wChannelConfig);
+ term->name = d->iTerminal;
+ return 0;
+}
+
+static int parse_term_uac2_iterm_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
{
- int protocol = state->mixer->protocol;
+ struct uac2_input_terminal_descriptor *d = p1;
int err;
- void *p1;
- unsigned char *hdr;
- memset(term, 0, sizeof(*term));
- for (;;) {
- /* a loop in the terminal chain? */
- if (test_and_set_bit(id, state->termbitmap))
- return -EINVAL;
+ /* call recursively to verify the referenced clock entity */
+ err = __check_input_term(state, d->bCSourceID, term);
+ if (err < 0)
+ return err;
- p1 = find_audio_control_unit(state, id);
- if (!p1)
- break;
- if (!snd_usb_validate_audio_desc(p1, protocol))
- break; /* bad descriptor */
+ /* save input term properties after recursion,
+ * to ensure they are not overriden by the recursion calls
+ */
+ term->id = id;
+ term->type = le16_to_cpu(d->wTerminalType);
+ term->channels = d->bNrChannels;
+ term->chconfig = le32_to_cpu(d->bmChannelConfig);
+ term->name = d->iTerminal;
+ return 0;
+}
- hdr = p1;
- term->id = id;
+static int parse_term_uac3_iterm_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac3_input_terminal_descriptor *d = p1;
+ int err;
- if (protocol == UAC_VERSION_1 || protocol == UAC_VERSION_2) {
- switch (hdr[2]) {
- case UAC_INPUT_TERMINAL:
- if (protocol == UAC_VERSION_1) {
- struct uac_input_terminal_descriptor *d = p1;
-
- term->type = le16_to_cpu(d->wTerminalType);
- term->channels = d->bNrChannels;
- term->chconfig = le16_to_cpu(d->wChannelConfig);
- term->name = d->iTerminal;
- } else { /* UAC_VERSION_2 */
- struct uac2_input_terminal_descriptor *d = p1;
-
- /* call recursively to verify that the
- * referenced clock entity is valid */
- err = __check_input_term(state, d->bCSourceID, term);
- if (err < 0)
- return err;
-
- /* save input term properties after recursion,
- * to ensure they are not overriden by the
- * recursion calls */
- term->id = id;
- term->type = le16_to_cpu(d->wTerminalType);
- term->channels = d->bNrChannels;
- term->chconfig = le32_to_cpu(d->bmChannelConfig);
- term->name = d->iTerminal;
- }
- return 0;
- case UAC_FEATURE_UNIT: {
- /* the header is the same for v1 and v2 */
- struct uac_feature_unit_descriptor *d = p1;
+ /* call recursively to verify the referenced clock entity */
+ err = __check_input_term(state, d->bCSourceID, term);
+ if (err < 0)
+ return err;
- id = d->bSourceID;
- break; /* continue to parse */
- }
- case UAC_MIXER_UNIT: {
- struct uac_mixer_unit_descriptor *d = p1;
+ /* save input term properties after recursion,
+ * to ensure they are not overriden by the recursion calls
+ */
+ term->id = id;
+ term->type = le16_to_cpu(d->wTerminalType);
- term->type = UAC3_MIXER_UNIT << 16; /* virtual type */
- term->channels = uac_mixer_unit_bNrChannels(d);
- term->chconfig = uac_mixer_unit_wChannelConfig(d, protocol);
- term->name = uac_mixer_unit_iMixer(d);
- return 0;
- }
- case UAC_SELECTOR_UNIT:
- case UAC2_CLOCK_SELECTOR: {
- struct uac_selector_unit_descriptor *d = p1;
- /* call recursively to retrieve the channel info */
- err = __check_input_term(state, d->baSourceID[0], term);
- if (err < 0)
- return err;
- term->type = UAC3_SELECTOR_UNIT << 16; /* virtual type */
- term->id = id;
- term->name = uac_selector_unit_iSelector(d);
- return 0;
- }
- case UAC1_PROCESSING_UNIT:
- /* UAC2_EFFECT_UNIT */
- if (protocol == UAC_VERSION_1)
- term->type = UAC3_PROCESSING_UNIT << 16; /* virtual type */
- else /* UAC_VERSION_2 */
- term->type = UAC3_EFFECT_UNIT << 16; /* virtual type */
- /* fall through */
- case UAC1_EXTENSION_UNIT:
- /* UAC2_PROCESSING_UNIT_V2 */
- if (protocol == UAC_VERSION_1 && !term->type)
- term->type = UAC3_EXTENSION_UNIT << 16; /* virtual type */
- else if (protocol == UAC_VERSION_2 && !term->type)
- term->type = UAC3_PROCESSING_UNIT << 16; /* virtual type */
- /* fall through */
- case UAC2_EXTENSION_UNIT_V2: {
- struct uac_processing_unit_descriptor *d = p1;
-
- if (protocol == UAC_VERSION_2 &&
- hdr[2] == UAC2_EFFECT_UNIT) {
- /* UAC2/UAC1 unit IDs overlap here in an
- * uncompatible way. Ignore this unit for now.
- */
- return 0;
- }
+ err = get_cluster_channels_v3(state, le16_to_cpu(d->wClusterDescrID));
+ if (err < 0)
+ return err;
+ term->channels = err;
- if (d->bNrInPins) {
- id = d->baSourceID[0];
- break; /* continue to parse */
- }
- if (!term->type)
- term->type = UAC3_EXTENSION_UNIT << 16; /* virtual type */
+ /* REVISIT: UAC3 IT doesn't have channels cfg */
+ term->chconfig = 0;
- term->channels = uac_processing_unit_bNrChannels(d);
- term->chconfig = uac_processing_unit_wChannelConfig(d, protocol);
- term->name = uac_processing_unit_iProcessing(d, protocol);
- return 0;
- }
- case UAC2_CLOCK_SOURCE: {
- struct uac_clock_source_descriptor *d = p1;
+ term->name = le16_to_cpu(d->wTerminalDescrStr);
+ return 0;
+}
- term->type = UAC3_CLOCK_SOURCE << 16; /* virtual type */
- term->id = id;
- term->name = d->iClockSource;
- return 0;
- }
- default:
- return -ENODEV;
- }
- } else { /* UAC_VERSION_3 */
- switch (hdr[2]) {
- case UAC_INPUT_TERMINAL: {
- struct uac3_input_terminal_descriptor *d = p1;
-
- /* call recursively to verify that the
- * referenced clock entity is valid */
- err = __check_input_term(state, d->bCSourceID, term);
- if (err < 0)
- return err;
-
- /* save input term properties after recursion,
- * to ensure they are not overriden by the
- * recursion calls */
- term->id = id;
- term->type = le16_to_cpu(d->wTerminalType);
-
- err = get_cluster_channels_v3(state, le16_to_cpu(d->wClusterDescrID));
- if (err < 0)
- return err;
- term->channels = err;
+static int parse_term_mixer_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac_mixer_unit_descriptor *d = p1;
+ int protocol = state->mixer->protocol;
+ int err;
- /* REVISIT: UAC3 IT doesn't have channels cfg */
- term->chconfig = 0;
+ err = uac_mixer_unit_get_channels(state, d);
+ if (err <= 0)
+ return err;
- term->name = le16_to_cpu(d->wTerminalDescrStr);
- return 0;
- }
- case UAC3_FEATURE_UNIT: {
- struct uac3_feature_unit_descriptor *d = p1;
+ term->type = UAC3_MIXER_UNIT << 16; /* virtual type */
+ term->channels = err;
+ if (protocol != UAC_VERSION_3) {
+ term->chconfig = uac_mixer_unit_wChannelConfig(d, protocol);
+ term->name = uac_mixer_unit_iMixer(d);
+ }
+ return 0;
+}
- id = d->bSourceID;
- break; /* continue to parse */
- }
- case UAC3_CLOCK_SOURCE: {
- struct uac3_clock_source_descriptor *d = p1;
+static int parse_term_selector_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac_selector_unit_descriptor *d = p1;
+ int err;
- term->type = UAC3_CLOCK_SOURCE << 16; /* virtual type */
- term->id = id;
- term->name = le16_to_cpu(d->wClockSourceStr);
- return 0;
- }
- case UAC3_MIXER_UNIT: {
- struct uac_mixer_unit_descriptor *d = p1;
+ /* call recursively to retrieve the channel info */
+ err = __check_input_term(state, d->baSourceID[0], term);
+ if (err < 0)
+ return err;
+ term->type = UAC3_SELECTOR_UNIT << 16; /* virtual type */
+ term->id = id;
+ if (state->mixer->protocol != UAC_VERSION_3)
+ term->name = uac_selector_unit_iSelector(d);
+ return 0;
+}
- err = uac_mixer_unit_get_channels(state, d);
- if (err <= 0)
- return err;
+static int parse_term_proc_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id, int vtype)
+{
+ struct uac_processing_unit_descriptor *d = p1;
+ int protocol = state->mixer->protocol;
+ int err;
- term->channels = err;
- term->type = UAC3_MIXER_UNIT << 16; /* virtual type */
+ if (d->bNrInPins) {
+ /* call recursively to retrieve the channel info */
+ err = __check_input_term(state, d->baSourceID[0], term);
+ if (err < 0)
+ return err;
+ }
- return 0;
- }
- case UAC3_SELECTOR_UNIT:
- case UAC3_CLOCK_SELECTOR: {
- struct uac_selector_unit_descriptor *d = p1;
- /* call recursively to retrieve the channel info */
- err = __check_input_term(state, d->baSourceID[0], term);
- if (err < 0)
- return err;
- term->type = UAC3_SELECTOR_UNIT << 16; /* virtual type */
- term->id = id;
- term->name = 0; /* TODO: UAC3 Class-specific strings */
+ term->type = vtype << 16; /* virtual type */
+ term->id = id;
- return 0;
- }
- case UAC3_PROCESSING_UNIT: {
- struct uac_processing_unit_descriptor *d = p1;
+ if (protocol == UAC_VERSION_3)
+ return 0;
- if (!d->bNrInPins)
- return -EINVAL;
+ if (!term->channels) {
+ term->channels = uac_processing_unit_bNrChannels(d);
+ term->chconfig = uac_processing_unit_wChannelConfig(d, protocol);
+ }
+ term->name = uac_processing_unit_iProcessing(d, protocol);
+ return 0;
+}
+
+static int parse_term_uac2_clock_source(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac_clock_source_descriptor *d = p1;
+
+ term->type = UAC3_CLOCK_SOURCE << 16; /* virtual type */
+ term->id = id;
+ term->name = d->iClockSource;
+ return 0;
+}
- /* call recursively to retrieve the channel info */
- err = __check_input_term(state, d->baSourceID[0], term);
- if (err < 0)
- return err;
-
- term->type = UAC3_PROCESSING_UNIT << 16; /* virtual type */
- term->id = id;
- term->name = 0; /* TODO: UAC3 Class-specific strings */
+static int parse_term_uac3_clock_source(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac3_clock_source_descriptor *d = p1;
+
+ term->type = UAC3_CLOCK_SOURCE << 16; /* virtual type */
+ term->id = id;
+ term->name = le16_to_cpu(d->wClockSourceStr);
+ return 0;
+}
- return 0;
- }
- default:
- return -ENODEV;
- }
+#define PTYPE(a, b) ((a) << 8 | (b))
+
+/*
+ * parse the source unit recursively until it reaches to a terminal
+ * or a branched unit.
+ */
+static int __check_input_term(struct mixer_build *state, int id,
+ struct usb_audio_term *term)
+{
+ int protocol = state->mixer->protocol;
+ void *p1;
+ unsigned char *hdr;
+
+ for (;;) {
+ /* a loop in the terminal chain? */
+ if (test_and_set_bit(id, state->termbitmap))
+ return -EINVAL;
+
+ p1 = find_audio_control_unit(state, id);
+ if (!p1)
+ break;
+ if (!snd_usb_validate_audio_desc(p1, protocol))
+ break; /* bad descriptor */
+
+ hdr = p1;
+ term->id = id;
+
+ switch (PTYPE(protocol, hdr[2])) {
+ case PTYPE(UAC_VERSION_1, UAC_FEATURE_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_FEATURE_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_FEATURE_UNIT): {
+ /* the header is the same for all versions */
+ struct uac_feature_unit_descriptor *d = p1;
+
+ id = d->bSourceID;
+ break; /* continue to parse */
+ }
+ case PTYPE(UAC_VERSION_1, UAC_INPUT_TERMINAL):
+ return parse_term_uac1_iterm_unit(state, term, p1, id);
+ case PTYPE(UAC_VERSION_2, UAC_INPUT_TERMINAL):
+ return parse_term_uac2_iterm_unit(state, term, p1, id);
+ case PTYPE(UAC_VERSION_3, UAC_INPUT_TERMINAL):
+ return parse_term_uac3_iterm_unit(state, term, p1, id);
+ case PTYPE(UAC_VERSION_1, UAC_MIXER_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_MIXER_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_MIXER_UNIT):
+ return parse_term_mixer_unit(state, term, p1, id);
+ case PTYPE(UAC_VERSION_1, UAC_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_CLOCK_SELECTOR):
+ case PTYPE(UAC_VERSION_3, UAC3_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_CLOCK_SELECTOR):
+ return parse_term_selector_unit(state, term, p1, id);
+ case PTYPE(UAC_VERSION_1, UAC1_PROCESSING_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_PROCESSING_UNIT_V2):
+ case PTYPE(UAC_VERSION_3, UAC3_PROCESSING_UNIT):
+ return parse_term_proc_unit(state, term, p1, id,
+ UAC3_PROCESSING_UNIT);
+ case PTYPE(UAC_VERSION_2, UAC2_EFFECT_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_EFFECT_UNIT):
+ return parse_term_proc_unit(state, term, p1, id,
+ UAC3_EFFECT_UNIT);
+ case PTYPE(UAC_VERSION_1, UAC1_EXTENSION_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_EXTENSION_UNIT_V2):
+ case PTYPE(UAC_VERSION_3, UAC3_EXTENSION_UNIT):
+ return parse_term_proc_unit(state, term, p1, id,
+ UAC3_EXTENSION_UNIT);
+ case PTYPE(UAC_VERSION_2, UAC2_CLOCK_SOURCE):
+ return parse_term_uac2_clock_source(state, term, p1, id);
+ case PTYPE(UAC_VERSION_3, UAC3_CLOCK_SOURCE):
+ return parse_term_uac3_clock_source(state, term, p1, id);
+ default:
+ return -ENODEV;
}
}
return -ENODEV;
@@ -2731,7 +2749,6 @@ static int parse_audio_unit(struct mixer
return 0; /* skip invalid unit */
}
-#define PTYPE(a, b) ((a) << 8 | (b))
switch (PTYPE(protocol, p1[2])) {
case PTYPE(UAC_VERSION_1, UAC_INPUT_TERMINAL):
case PTYPE(UAC_VERSION_2, UAC_INPUT_TERMINAL):
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 062/125] ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (60 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 061/125] ALSA: usb-audio: Clean up check_input_term() Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-13 10:19 ` Pavel Machek
2019-11-11 18:28 ` [PATCH 4.19 063/125] ALSA: usb-audio: remove some dead code Greg Kroah-Hartman
` (66 subsequent siblings)
128 siblings, 1 reply; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 60849562a5db4a1eee2160167e4dce4590d3eafe upstream.
The previous addition of descriptor validation may lead to a NULL
dereference at create_yamaha_midi_quirk() when either injd or outjd is
NULL. Add proper non-NULL checks.
Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/quirks.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -259,8 +259,8 @@ static int create_yamaha_midi_quirk(stru
NULL, USB_MS_MIDI_OUT_JACK);
if (!injd && !outjd)
return -ENODEV;
- if (!snd_usb_validate_midi_desc(injd) ||
- !snd_usb_validate_midi_desc(outjd))
+ if (!(injd && snd_usb_validate_midi_desc(injd)) ||
+ !(outjd && snd_usb_validate_midi_desc(outjd)))
return -ENODEV;
if (injd && (injd->bLength < 5 ||
(injd->bJackType != USB_MS_EMBEDDED &&
^ permalink raw reply [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 062/125] ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()
2019-11-11 18:28 ` [PATCH 4.19 062/125] ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk() Greg Kroah-Hartman
@ 2019-11-13 10:19 ` Pavel Machek
2019-11-13 10:35 ` Takashi Iwai
0 siblings, 1 reply; 145+ messages in thread
From: Pavel Machek @ 2019-11-13 10:19 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, stable, Dan Carpenter, Takashi Iwai
[-- Attachment #1: Type: text/plain, Size: 1120 bytes --]
Hi!
> From: Takashi Iwai <tiwai@suse.de>
>
> commit 60849562a5db4a1eee2160167e4dce4590d3eafe upstream.
>
> The previous addition of descriptor validation may lead to a NULL
> dereference at create_yamaha_midi_quirk() when either injd or outjd is
> NULL. Add proper non-NULL checks.
This is wrong.
> @@ -259,8 +259,8 @@ static int create_yamaha_midi_quirk(stru
> NULL, USB_MS_MIDI_OUT_JACK);
> if (!injd && !outjd)
> return -ENODEV;
Clearly code wants to allow at most one of them to be NULL.
> - if (!snd_usb_validate_midi_desc(injd) ||
> - !snd_usb_validate_midi_desc(outjd))
> + if (!(injd && snd_usb_validate_midi_desc(injd)) ||
> + !(outjd && snd_usb_validate_midi_desc(outjd)))
> return -ENODEV;
Yet it will return here if it is. Correct check would be
+ if (!(!injd || snd_usb_validate_midi_desc(injd)) ||
+ !(!outjd || snd_usb_validate_midi_desc(outjd)))
AFAICT.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 145+ messages in thread
* Re: [PATCH 4.19 062/125] ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()
2019-11-13 10:19 ` Pavel Machek
@ 2019-11-13 10:35 ` Takashi Iwai
2019-11-13 10:36 ` Takashi Iwai
0 siblings, 1 reply; 145+ messages in thread
From: Takashi Iwai @ 2019-11-13 10:35 UTC (permalink / raw)
To: Pavel Machek
Cc: Greg Kroah-Hartman, linux-kernel, stable, Dan Carpenter, Takashi Iwai
On Wed, 13 Nov 2019 11:19:54 +0100,
Pavel Machek wrote:
>
> Hi!
>
> > From: Takashi Iwai <tiwai@suse.de>
> >
> > commit 60849562a5db4a1eee2160167e4dce4590d3eafe upstream.
> >
> > The previous addition of descriptor validation may lead to a NULL
> > dereference at create_yamaha_midi_quirk() when either injd or outjd is
> > NULL. Add proper non-NULL checks.
>
> This is wrong.
>
> > @@ -259,8 +259,8 @@ static int create_yamaha_midi_quirk(stru
> > NULL, USB_MS_MIDI_OUT_JACK);
> > if (!injd && !outjd)
> > return -ENODEV;
>
> Clearly code wants to allow at most one of them to be NULL.
>
> > - if (!snd_usb_validate_midi_desc(injd) ||
> > - !snd_usb_validate_midi_desc(outjd))
> > + if (!(injd && snd_usb_validate_midi_desc(injd)) ||
> > + !(outjd && snd_usb_validate_midi_desc(outjd)))
> > return -ENODEV;
>
> Yet it will return here if it is. Correct check would be
>
> + if (!(!injd || snd_usb_validate_midi_desc(injd)) ||
> + !(!outjd || snd_usb_validate_midi_desc(outjd)))
>
> AFAICT.
Erm, right, but a better representation is:
if ((injd && !snd_usb_validate_midi_desc(injd)) ||
(outjd && !snd_usb_validate_midi_desc(injd)))
thanks,
Takashi
^ permalink raw reply [flat|nested] 145+ messages in thread
* Re: [PATCH 4.19 062/125] ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()
2019-11-13 10:35 ` Takashi Iwai
@ 2019-11-13 10:36 ` Takashi Iwai
2019-11-18 14:33 ` Pavel Machek
0 siblings, 1 reply; 145+ messages in thread
From: Takashi Iwai @ 2019-11-13 10:36 UTC (permalink / raw)
To: Pavel Machek; +Cc: Greg Kroah-Hartman, linux-kernel, stable, Dan Carpenter
On Wed, 13 Nov 2019 11:35:16 +0100,
Takashi Iwai wrote:
>
> On Wed, 13 Nov 2019 11:19:54 +0100,
> Pavel Machek wrote:
> >
> > Hi!
> >
> > > From: Takashi Iwai <tiwai@suse.de>
> > >
> > > commit 60849562a5db4a1eee2160167e4dce4590d3eafe upstream.
> > >
> > > The previous addition of descriptor validation may lead to a NULL
> > > dereference at create_yamaha_midi_quirk() when either injd or outjd is
> > > NULL. Add proper non-NULL checks.
> >
> > This is wrong.
> >
> > > @@ -259,8 +259,8 @@ static int create_yamaha_midi_quirk(stru
> > > NULL, USB_MS_MIDI_OUT_JACK);
> > > if (!injd && !outjd)
> > > return -ENODEV;
> >
> > Clearly code wants to allow at most one of them to be NULL.
> >
> > > - if (!snd_usb_validate_midi_desc(injd) ||
> > > - !snd_usb_validate_midi_desc(outjd))
> > > + if (!(injd && snd_usb_validate_midi_desc(injd)) ||
> > > + !(outjd && snd_usb_validate_midi_desc(outjd)))
> > > return -ENODEV;
> >
> > Yet it will return here if it is. Correct check would be
> >
> > + if (!(!injd || snd_usb_validate_midi_desc(injd)) ||
> > + !(!outjd || snd_usb_validate_midi_desc(outjd)))
> >
> > AFAICT.
>
> Erm, right, but a better representation is:
>
> if ((injd && !snd_usb_validate_midi_desc(injd)) ||
> (outjd && !snd_usb_validate_midi_desc(injd)))
Of course, another typo:
if ((injd && !snd_usb_validate_midi_desc(injd)) ||
(outjd && !snd_usb_validate_midi_desc(outjd)))
Takashi
^ permalink raw reply [flat|nested] 145+ messages in thread
* Re: [PATCH 4.19 062/125] ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()
2019-11-13 10:36 ` Takashi Iwai
@ 2019-11-18 14:33 ` Pavel Machek
0 siblings, 0 replies; 145+ messages in thread
From: Pavel Machek @ 2019-11-18 14:33 UTC (permalink / raw)
To: Takashi Iwai
Cc: Pavel Machek, Greg Kroah-Hartman, linux-kernel, stable, Dan Carpenter
[-- Attachment #1: Type: text/plain, Size: 1142 bytes --]
Hi!
> > > Clearly code wants to allow at most one of them to be NULL.
> > >
> > > > - if (!snd_usb_validate_midi_desc(injd) ||
> > > > - !snd_usb_validate_midi_desc(outjd))
> > > > + if (!(injd && snd_usb_validate_midi_desc(injd)) ||
> > > > + !(outjd && snd_usb_validate_midi_desc(outjd)))
> > > > return -ENODEV;
> > >
> > > Yet it will return here if it is. Correct check would be
> > >
> > > + if (!(!injd || snd_usb_validate_midi_desc(injd)) ||
> > > + !(!outjd || snd_usb_validate_midi_desc(outjd)))
> > >
> > > AFAICT.
> >
> > Erm, right, but a better representation is:
> >
> > if ((injd && !snd_usb_validate_midi_desc(injd)) ||
> > (outjd && !snd_usb_validate_midi_desc(injd)))
>
> Of course, another typo:
>
> if ((injd && !snd_usb_validate_midi_desc(injd)) ||
> (outjd && !snd_usb_validate_midi_desc(outjd)))
Agreed, that is better. I was focusing on boolean algebra too much.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 145+ messages in thread
* [PATCH 4.19 063/125] ALSA: usb-audio: remove some dead code
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (61 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 062/125] ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk() Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 064/125] ALSA: usb-audio: Fix copy&paste error in the validator Greg Kroah-Hartman
` (65 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Takashi Iwai
From: Dan Carpenter <dan.carpenter@oracle.com>
commit b39e077fcb283dd96dd251a3abeba585402c61fe upstream.
We recently cleaned up the error handling in commit 52c3e317a857 ("ALSA:
usb-audio: Unify the release of usb_mixer_elem_info objects") but
accidentally left this stray return.
Fixes: 52c3e317a857 ("ALSA: usb-audio: Unify the release of usb_mixer_elem_info objects")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer.c | 1 -
1 file changed, 1 deletion(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2670,7 +2670,6 @@ static int parse_audio_selector_unit(str
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
err = -ENOMEM;
goto error_name;
- return -ENOMEM;
}
kctl->private_value = (unsigned long)namelist;
kctl->private_free = usb_mixer_selector_elem_free;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 064/125] ALSA: usb-audio: Fix copy&paste error in the validator
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (62 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 063/125] ALSA: usb-audio: remove some dead code Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 065/125] sched/fair: Fix low cpu usage with high throttling by removing expiration of cpu-local slices Greg Kroah-Hartman
` (64 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+0620f79a1978b1133fd7, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit ba8bf0967a154796be15c4983603aad0b05c3138 upstream.
The recently introduced USB-audio descriptor validator had a stupid
copy&paste error that may lead to an unexpected overlook of too short
descriptors for processing and extension units. It's likely the cause
of the report triggered by syzkaller fuzzer. Let's fix it.
Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units")
Reported-by: syzbot+0620f79a1978b1133fd7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/s5hsgnkdbsl.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/validate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/usb/validate.c
+++ b/sound/usb/validate.c
@@ -75,7 +75,7 @@ static bool validate_processing_unit(con
if (d->bLength < sizeof(*d))
return false;
- len = d->bLength < sizeof(*d) + d->bNrInPins;
+ len = sizeof(*d) + d->bNrInPins;
if (d->bLength < len)
return false;
switch (v->protocol) {
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 065/125] sched/fair: Fix low cpu usage with high throttling by removing expiration of cpu-local slices
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (63 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 064/125] ALSA: usb-audio: Fix copy&paste error in the validator Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 066/125] sched/fair: Fix -Wunused-but-set-variable warnings Greg Kroah-Hartman
` (63 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dave Chiluk, Peter Zijlstra (Intel),
Phil Auld, Ben Segall, Ingo Molnar, John Hammond,
Jonathan Corbet, Kyle Anderson, Gabriel Munos, Peter Oskolkov,
Cong Wang, Brendan Gregg
From: Dave Chiluk <chiluk+linux@indeed.com>
commit de53fd7aedb100f03e5d2231cfce0e4993282425 upstream.
It has been observed, that highly-threaded, non-cpu-bound applications
running under cpu.cfs_quota_us constraints can hit a high percentage of
periods throttled while simultaneously not consuming the allocated
amount of quota. This use case is typical of user-interactive non-cpu
bound applications, such as those running in kubernetes or mesos when
run on multiple cpu cores.
This has been root caused to cpu-local run queue being allocated per cpu
bandwidth slices, and then not fully using that slice within the period.
At which point the slice and quota expires. This expiration of unused
slice results in applications not being able to utilize the quota for
which they are allocated.
The non-expiration of per-cpu slices was recently fixed by
'commit 512ac999d275 ("sched/fair: Fix bandwidth timer clock drift
condition")'. Prior to that it appears that this had been broken since
at least 'commit 51f2176d74ac ("sched/fair: Fix unlocked reads of some
cfs_b->quota/period")' which was introduced in v3.16-rc1 in 2014. That
added the following conditional which resulted in slices never being
expired.
if (cfs_rq->runtime_expires != cfs_b->runtime_expires) {
/* extend local deadline, drift is bounded above by 2 ticks */
cfs_rq->runtime_expires += TICK_NSEC;
Because this was broken for nearly 5 years, and has recently been fixed
and is now being noticed by many users running kubernetes
(https://github.com/kubernetes/kubernetes/issues/67577) it is my opinion
that the mechanisms around expiring runtime should be removed
altogether.
This allows quota already allocated to per-cpu run-queues to live longer
than the period boundary. This allows threads on runqueues that do not
use much CPU to continue to use their remaining slice over a longer
period of time than cpu.cfs_period_us. However, this helps prevent the
above condition of hitting throttling while also not fully utilizing
your cpu quota.
This theoretically allows a machine to use slightly more than its
allotted quota in some periods. This overflow would be bounded by the
remaining quota left on each per-cpu runqueueu. This is typically no
more than min_cfs_rq_runtime=1ms per cpu. For CPU bound tasks this will
change nothing, as they should theoretically fully utilize all of their
quota in each period. For user-interactive tasks as described above this
provides a much better user/application experience as their cpu
utilization will more closely match the amount they requested when they
hit throttling. This means that cpu limits no longer strictly apply per
period for non-cpu bound applications, but that they are still accurate
over longer timeframes.
This greatly improves performance of high-thread-count, non-cpu bound
applications with low cfs_quota_us allocation on high-core-count
machines. In the case of an artificial testcase (10ms/100ms of quota on
80 CPU machine), this commit resulted in almost 30x performance
improvement, while still maintaining correct cpu quota restrictions.
That testcase is available at https://github.com/indeedeng/fibtest.
Fixes: 512ac999d275 ("sched/fair: Fix bandwidth timer clock drift condition")
Signed-off-by: Dave Chiluk <chiluk+linux@indeed.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Hammond <jhammond@indeed.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kyle Anderson <kwa@yelp.com>
Cc: Gabriel Munos <gmunoz@netflix.com>
Cc: Peter Oskolkov <posk@posk.io>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Brendan Gregg <bgregg@netflix.com>
Link: https://lkml.kernel.org/r/1563900266-19734-2-git-send-email-chiluk+linux@indeed.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/scheduler/sched-bwc.txt | 45 +++++++++++++++++++++
kernel/sched/fair.c | 72 +++-------------------------------
kernel/sched/sched.h | 4 -
3 files changed, 52 insertions(+), 69 deletions(-)
--- a/Documentation/scheduler/sched-bwc.txt
+++ b/Documentation/scheduler/sched-bwc.txt
@@ -90,6 +90,51 @@ There are two ways in which a group may
In case b) above, even though the child may have runtime remaining it will not
be allowed to until the parent's runtime is refreshed.
+CFS Bandwidth Quota Caveats
+---------------------------
+Once a slice is assigned to a cpu it does not expire. However all but 1ms of
+the slice may be returned to the global pool if all threads on that cpu become
+unrunnable. This is configured at compile time by the min_cfs_rq_runtime
+variable. This is a performance tweak that helps prevent added contention on
+the global lock.
+
+The fact that cpu-local slices do not expire results in some interesting corner
+cases that should be understood.
+
+For cgroup cpu constrained applications that are cpu limited this is a
+relatively moot point because they will naturally consume the entirety of their
+quota as well as the entirety of each cpu-local slice in each period. As a
+result it is expected that nr_periods roughly equal nr_throttled, and that
+cpuacct.usage will increase roughly equal to cfs_quota_us in each period.
+
+For highly-threaded, non-cpu bound applications this non-expiration nuance
+allows applications to briefly burst past their quota limits by the amount of
+unused slice on each cpu that the task group is running on (typically at most
+1ms per cpu or as defined by min_cfs_rq_runtime). This slight burst only
+applies if quota had been assigned to a cpu and then not fully used or returned
+in previous periods. This burst amount will not be transferred between cores.
+As a result, this mechanism still strictly limits the task group to quota
+average usage, albeit over a longer time window than a single period. This
+also limits the burst ability to no more than 1ms per cpu. This provides
+better more predictable user experience for highly threaded applications with
+small quota limits on high core count machines. It also eliminates the
+propensity to throttle these applications while simultanously using less than
+quota amounts of cpu. Another way to say this, is that by allowing the unused
+portion of a slice to remain valid across periods we have decreased the
+possibility of wastefully expiring quota on cpu-local silos that don't need a
+full slice's amount of cpu time.
+
+The interaction between cpu-bound and non-cpu-bound-interactive applications
+should also be considered, especially when single core usage hits 100%. If you
+gave each of these applications half of a cpu-core and they both got scheduled
+on the same CPU it is theoretically possible that the non-cpu bound application
+will use up to 1ms additional quota in some periods, thereby preventing the
+cpu-bound application from fully using its quota by that same amount. In these
+instances it will be up to the CFS algorithm (see sched-design-CFS.rst) to
+decide which application is chosen to run, as they will both be runnable and
+have remaining quota. This runtime discrepancy will be made up in the following
+periods when the interactive application idles.
+
Examples
--------
1. Limit a group to 1 CPU worth of runtime.
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4320,8 +4320,6 @@ void __refill_cfs_bandwidth_runtime(stru
now = sched_clock_cpu(smp_processor_id());
cfs_b->runtime = cfs_b->quota;
- cfs_b->runtime_expires = now + ktime_to_ns(cfs_b->period);
- cfs_b->expires_seq++;
}
static inline struct cfs_bandwidth *tg_cfs_bandwidth(struct task_group *tg)
@@ -4343,8 +4341,7 @@ static int assign_cfs_rq_runtime(struct
{
struct task_group *tg = cfs_rq->tg;
struct cfs_bandwidth *cfs_b = tg_cfs_bandwidth(tg);
- u64 amount = 0, min_amount, expires;
- int expires_seq;
+ u64 amount = 0, min_amount;
/* note: this is a positive sum as runtime_remaining <= 0 */
min_amount = sched_cfs_bandwidth_slice() - cfs_rq->runtime_remaining;
@@ -4361,61 +4358,17 @@ static int assign_cfs_rq_runtime(struct
cfs_b->idle = 0;
}
}
- expires_seq = cfs_b->expires_seq;
- expires = cfs_b->runtime_expires;
raw_spin_unlock(&cfs_b->lock);
cfs_rq->runtime_remaining += amount;
- /*
- * we may have advanced our local expiration to account for allowed
- * spread between our sched_clock and the one on which runtime was
- * issued.
- */
- if (cfs_rq->expires_seq != expires_seq) {
- cfs_rq->expires_seq = expires_seq;
- cfs_rq->runtime_expires = expires;
- }
return cfs_rq->runtime_remaining > 0;
}
-/*
- * Note: This depends on the synchronization provided by sched_clock and the
- * fact that rq->clock snapshots this value.
- */
-static void expire_cfs_rq_runtime(struct cfs_rq *cfs_rq)
-{
- struct cfs_bandwidth *cfs_b = tg_cfs_bandwidth(cfs_rq->tg);
-
- /* if the deadline is ahead of our clock, nothing to do */
- if (likely((s64)(rq_clock(rq_of(cfs_rq)) - cfs_rq->runtime_expires) < 0))
- return;
-
- if (cfs_rq->runtime_remaining < 0)
- return;
-
- /*
- * If the local deadline has passed we have to consider the
- * possibility that our sched_clock is 'fast' and the global deadline
- * has not truly expired.
- *
- * Fortunately we can check determine whether this the case by checking
- * whether the global deadline(cfs_b->expires_seq) has advanced.
- */
- if (cfs_rq->expires_seq == cfs_b->expires_seq) {
- /* extend local deadline, drift is bounded above by 2 ticks */
- cfs_rq->runtime_expires += TICK_NSEC;
- } else {
- /* global deadline is ahead, expiration has passed */
- cfs_rq->runtime_remaining = 0;
- }
-}
-
static void __account_cfs_rq_runtime(struct cfs_rq *cfs_rq, u64 delta_exec)
{
/* dock delta_exec before expiring quota (as it could span periods) */
cfs_rq->runtime_remaining -= delta_exec;
- expire_cfs_rq_runtime(cfs_rq);
if (likely(cfs_rq->runtime_remaining > 0))
return;
@@ -4600,8 +4553,7 @@ void unthrottle_cfs_rq(struct cfs_rq *cf
resched_curr(rq);
}
-static u64 distribute_cfs_runtime(struct cfs_bandwidth *cfs_b,
- u64 remaining, u64 expires)
+static u64 distribute_cfs_runtime(struct cfs_bandwidth *cfs_b, u64 remaining)
{
struct cfs_rq *cfs_rq;
u64 runtime;
@@ -4626,7 +4578,6 @@ static u64 distribute_cfs_runtime(struct
remaining -= runtime;
cfs_rq->runtime_remaining += runtime;
- cfs_rq->runtime_expires = expires;
/* we check whether we're throttled above */
if (cfs_rq->runtime_remaining > 0)
@@ -4651,7 +4602,7 @@ next:
*/
static int do_sched_cfs_period_timer(struct cfs_bandwidth *cfs_b, int overrun)
{
- u64 runtime, runtime_expires;
+ u64 runtime;
int throttled;
/* no need to continue the timer with no bandwidth constraint */
@@ -4679,8 +4630,6 @@ static int do_sched_cfs_period_timer(str
/* account preceding periods in which throttling occurred */
cfs_b->nr_throttled += overrun;
- runtime_expires = cfs_b->runtime_expires;
-
/*
* This check is repeated as we are holding onto the new bandwidth while
* we unthrottle. This can potentially race with an unthrottled group
@@ -4693,8 +4642,7 @@ static int do_sched_cfs_period_timer(str
cfs_b->distribute_running = 1;
raw_spin_unlock(&cfs_b->lock);
/* we can't nest cfs_b->lock while distributing bandwidth */
- runtime = distribute_cfs_runtime(cfs_b, runtime,
- runtime_expires);
+ runtime = distribute_cfs_runtime(cfs_b, runtime);
raw_spin_lock(&cfs_b->lock);
cfs_b->distribute_running = 0;
@@ -4771,8 +4719,7 @@ static void __return_cfs_rq_runtime(stru
return;
raw_spin_lock(&cfs_b->lock);
- if (cfs_b->quota != RUNTIME_INF &&
- cfs_rq->runtime_expires == cfs_b->runtime_expires) {
+ if (cfs_b->quota != RUNTIME_INF) {
cfs_b->runtime += slack_runtime;
/* we are under rq->lock, defer unthrottling using a timer */
@@ -4804,7 +4751,6 @@ static __always_inline void return_cfs_r
static void do_sched_cfs_slack_timer(struct cfs_bandwidth *cfs_b)
{
u64 runtime = 0, slice = sched_cfs_bandwidth_slice();
- u64 expires;
/* confirm we're still not at a refresh boundary */
raw_spin_lock(&cfs_b->lock);
@@ -4821,7 +4767,6 @@ static void do_sched_cfs_slack_timer(str
if (cfs_b->quota != RUNTIME_INF && cfs_b->runtime > slice)
runtime = cfs_b->runtime;
- expires = cfs_b->runtime_expires;
if (runtime)
cfs_b->distribute_running = 1;
@@ -4830,11 +4775,10 @@ static void do_sched_cfs_slack_timer(str
if (!runtime)
return;
- runtime = distribute_cfs_runtime(cfs_b, runtime, expires);
+ runtime = distribute_cfs_runtime(cfs_b, runtime);
raw_spin_lock(&cfs_b->lock);
- if (expires == cfs_b->runtime_expires)
- cfs_b->runtime -= min(runtime, cfs_b->runtime);
+ cfs_b->runtime -= min(runtime, cfs_b->runtime);
cfs_b->distribute_running = 0;
raw_spin_unlock(&cfs_b->lock);
}
@@ -4989,8 +4933,6 @@ void start_cfs_bandwidth(struct cfs_band
cfs_b->period_active = 1;
overrun = hrtimer_forward_now(&cfs_b->period_timer, cfs_b->period);
- cfs_b->runtime_expires += (overrun + 1) * ktime_to_ns(cfs_b->period);
- cfs_b->expires_seq++;
hrtimer_start_expires(&cfs_b->period_timer, HRTIMER_MODE_ABS_PINNED);
}
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -334,8 +334,6 @@ struct cfs_bandwidth {
u64 quota;
u64 runtime;
s64 hierarchical_quota;
- u64 runtime_expires;
- int expires_seq;
short idle;
short period_active;
@@ -555,8 +553,6 @@ struct cfs_rq {
#ifdef CONFIG_CFS_BANDWIDTH
int runtime_enabled;
- int expires_seq;
- u64 runtime_expires;
s64 runtime_remaining;
u64 throttled_clock;
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 066/125] sched/fair: Fix -Wunused-but-set-variable warnings
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (64 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 065/125] sched/fair: Fix low cpu usage with high throttling by removing expiration of cpu-local slices Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 067/125] usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path Greg Kroah-Hartman
` (62 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qian Cai, Peter Zijlstra (Intel),
Ben Segall, Dave Chiluk, Linus Torvalds, Thomas Gleixner, pauld,
Ingo Molnar
From: Qian Cai <cai@lca.pw>
commit 763a9ec06c409dcde2a761aac4bb83ff3938e0b3 upstream.
Commit:
de53fd7aedb1 ("sched/fair: Fix low cpu usage with high throttling by removing expiration of cpu-local slices")
introduced a few compilation warnings:
kernel/sched/fair.c: In function '__refill_cfs_bandwidth_runtime':
kernel/sched/fair.c:4365:6: warning: variable 'now' set but not used [-Wunused-but-set-variable]
kernel/sched/fair.c: In function 'start_cfs_bandwidth':
kernel/sched/fair.c:4992:6: warning: variable 'overrun' set but not used [-Wunused-but-set-variable]
Also, __refill_cfs_bandwidth_runtime() does no longer update the
expiration time, so fix the comments accordingly.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Dave Chiluk <chiluk+linux@indeed.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pauld@redhat.com
Fixes: de53fd7aedb1 ("sched/fair: Fix low cpu usage with high throttling by removing expiration of cpu-local slices")
Link: https://lkml.kernel.org/r/1566326455-8038-1-git-send-email-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/sched/fair.c | 19 ++++++-------------
1 file changed, 6 insertions(+), 13 deletions(-)
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4305,21 +4305,16 @@ static inline u64 sched_cfs_bandwidth_sl
}
/*
- * Replenish runtime according to assigned quota and update expiration time.
- * We use sched_clock_cpu directly instead of rq->clock to avoid adding
- * additional synchronization around rq->lock.
+ * Replenish runtime according to assigned quota. We use sched_clock_cpu
+ * directly instead of rq->clock to avoid adding additional synchronization
+ * around rq->lock.
*
* requires cfs_b->lock
*/
void __refill_cfs_bandwidth_runtime(struct cfs_bandwidth *cfs_b)
{
- u64 now;
-
- if (cfs_b->quota == RUNTIME_INF)
- return;
-
- now = sched_clock_cpu(smp_processor_id());
- cfs_b->runtime = cfs_b->quota;
+ if (cfs_b->quota != RUNTIME_INF)
+ cfs_b->runtime = cfs_b->quota;
}
static inline struct cfs_bandwidth *tg_cfs_bandwidth(struct task_group *tg)
@@ -4924,15 +4919,13 @@ static void init_cfs_rq_runtime(struct c
void start_cfs_bandwidth(struct cfs_bandwidth *cfs_b)
{
- u64 overrun;
-
lockdep_assert_held(&cfs_b->lock);
if (cfs_b->period_active)
return;
cfs_b->period_active = 1;
- overrun = hrtimer_forward_now(&cfs_b->period_timer, cfs_b->period);
+ hrtimer_forward_now(&cfs_b->period_timer, cfs_b->period);
hrtimer_start_expires(&cfs_b->period_timer, HRTIMER_MODE_ABS_PINNED);
}
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 067/125] usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (65 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 066/125] sched/fair: Fix -Wunused-but-set-variable warnings Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 068/125] usbip: Implement SG support to vhci-hcd and stub driver Greg Kroah-Hartman
` (61 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Shuah Khan
From: Shuah Khan <shuah@kernel.org>
commit 2c904963b1dd2acd4bc785b6c72e10a6283c2081 upstream.
Fix vhci_urb_enqueue() to print debug msg and return error instead of
failing with BUG_ON.
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/usbip/vhci_hcd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -702,8 +702,10 @@ static int vhci_urb_enqueue(struct usb_h
}
vdev = &vhci_hcd->vdev[portnum-1];
- /* patch to usb_sg_init() is in 2.5.60 */
- BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length);
+ if (!urb->transfer_buffer && urb->transfer_buffer_length) {
+ dev_dbg(dev, "Null URB transfer buffer\n");
+ return -EINVAL;
+ }
spin_lock_irqsave(&vhci->lock, flags);
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 068/125] usbip: Implement SG support to vhci-hcd and stub driver
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (66 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 067/125] usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 069/125] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30 Greg Kroah-Hartman
` (60 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Suwan Kim, Shuah khan
From: Suwan Kim <suwan.kim027@gmail.com>
commit ea44d190764b4422af4d1c29eaeb9e69e353b406 upstream.
There are bugs on vhci with usb 3.0 storage device. In USB, each SG
list entry buffer should be divisible by the bulk max packet size.
But with native SG support, this problem doesn't matter because the
SG buffer is treated as contiguous buffer. But without native SG
support, USB storage driver breaks SG list into several URBs and the
error occurs because of a buffer size of URB that cannot be divided
by the bulk max packet size. The error situation is as follows.
When USB Storage driver requests 31.5 KB data and has SG list which
has 3584 bytes buffer followed by 7 4096 bytes buffer for some
reason. USB Storage driver splits this SG list into several URBs
because VHCI doesn't support SG and sends them separately. So the
first URB buffer size is 3584 bytes. When receiving data from device,
USB 3.0 device sends data packet of 1024 bytes size because the max
packet size of BULK pipe is 1024 bytes. So device sends 4096 bytes.
But the first URB buffer has only 3584 bytes buffer size. So host
controller terminates the transfer even though there is more data to
receive. So, vhci needs to support SG transfer to prevent this error.
In this patch, vhci supports SG regardless of whether the server's
host controller supports SG or not, because stub driver splits SG
list into several URBs if the server's host controller doesn't
support SG.
To support SG, vhci sets URB_DMA_MAP_SG flag in urb->transfer_flags
if URB has SG list and this flag will tell stub driver to use SG
list. After receiving urb from stub driver, vhci clear URB_DMA_MAP_SG
flag to avoid unnecessary DMA unmapping in HCD.
vhci sends each SG list entry to stub driver. Then, stub driver sees
the total length of the buffer and allocates SG table and pages
according to the total buffer length calling sgl_alloc(). After stub
driver receives completed URB, it again sends each SG list entry to
vhci.
If the server's host controller doesn't support SG, stub driver
breaks a single SG request into several URBs and submits them to
the server's host controller. When all the split URBs are completed,
stub driver reassembles the URBs into a single return command and
sends it to vhci.
Moreover, in the situation where vhci supports SG, but stub driver
does not, or vice versa, usbip works normally. Because there is no
protocol modification, there is no problem in communication between
server and client even if the one has a kernel without SG support.
In the case of vhci supports SG and stub driver doesn't, because
vhci sends only the total length of the buffer to stub driver as
it did before the patch applied, stub driver only needs to allocate
the required length of buffers using only kmalloc() regardless of
whether vhci supports SG or not. But stub driver has to allocate
buffer with kmalloc() as much as the total length of SG buffer which
is quite huge when vhci sends SG request, so it has overhead in
buffer allocation in this situation.
If stub driver needs to send data buffer to vhci because of IN pipe,
stub driver also sends only total length of buffer as metadata and
then sends real data as vhci does. Then vhci receive data from stub
driver and store it to the corresponding buffer of SG list entry.
And for the case of stub driver supports SG and vhci doesn't, since
the USB storage driver checks that vhci doesn't support SG and sends
the request to stub driver by splitting the SG list into multiple
URBs, stub driver allocates a buffer for each URB with kmalloc() as
it did before this patch.
* Test environment
Test uses two difference machines and two different kernel version
to make mismatch situation between the client and the server where
vhci supports SG, but stub driver does not, or vice versa. All tests
are conducted in both full SG support that both vhci and stub support
SG and half SG support that is the mismatch situation. Test kernel
version is 5.3-rc6 with commit "usb: add a HCD_DMA flag instead of
guestimating DMA capabilities" to avoid unnecessary DMA mapping and
unmapping.
- Test kernel version
- 5.3-rc6 with SG support
- 5.1.20-200.fc29.x86_64 without SG support
* SG support test
- Test devices
- Super-speed storage device - SanDisk Ultra USB 3.0
- High-speed storage device - SMI corporation USB 2.0 flash drive
- Test description
Test read and write operation of mass storage device that uses the
BULK transfer. In test, the client reads and writes files whose size
is over 1G and it works normally.
* Regression test
- Test devices
- Super-speed device - Logitech Brio webcam
- High-speed device - Logitech C920 HD Pro webcam
- Full-speed device - Logitech bluetooth mouse
- Britz BR-Orion speaker
- Low-speed device - Logitech wired mouse
- Test description
Moving and click test for mouse. To test the webcam, use gnome-cheese.
To test the speaker, play music and video on the client. All works
normally.
* VUDC compatibility test
VUDC also works well with this patch. Tests are done with two USB
gadget created by CONFIGFS USB gadget. Both use the BULK pipe.
1. Serial gadget
2. Mass storage gadget
- Serial gadget test
Serial gadget on the host sends and receives data using cat command
on the /dev/ttyGS<N>. The client uses minicom to communicate with
the serial gadget.
- Mass storage gadget test
After connecting the gadget with vhci, use "dd" to test read and
write operation on the client side.
Read - dd if=/dev/sd<N> iflag=direct of=/dev/null bs=1G count=1
Write - dd if=<my file path> iflag=direct of=/dev/sd<N> bs=1G count=1
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Acked-by: Shuah khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190828032741.12234-1-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/usbip/stub.h | 7 +
drivers/usb/usbip/stub_main.c | 57 ++++++++---
drivers/usb/usbip/stub_rx.c | 202 +++++++++++++++++++++++++++------------
drivers/usb/usbip/stub_tx.c | 99 ++++++++++++++-----
drivers/usb/usbip/usbip_common.c | 59 +++++++----
drivers/usb/usbip/vhci_hcd.c | 12 ++
drivers/usb/usbip/vhci_rx.c | 3
drivers/usb/usbip/vhci_tx.c | 66 ++++++++++--
8 files changed, 379 insertions(+), 126 deletions(-)
--- a/drivers/usb/usbip/stub.h
+++ b/drivers/usb/usbip/stub.h
@@ -52,7 +52,11 @@ struct stub_priv {
unsigned long seqnum;
struct list_head list;
struct stub_device *sdev;
- struct urb *urb;
+ struct urb **urbs;
+ struct scatterlist *sgl;
+ int num_urbs;
+ int completed_urbs;
+ int urb_status;
int unlinking;
};
@@ -86,6 +90,7 @@ extern struct usb_device_driver stub_dri
struct bus_id_priv *get_busid_priv(const char *busid);
void put_busid_priv(struct bus_id_priv *bid);
int del_match_busid(char *busid);
+void stub_free_priv_and_urb(struct stub_priv *priv);
void stub_device_cleanup_urbs(struct stub_device *sdev);
/* stub_rx.c */
--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -6,6 +6,7 @@
#include <linux/string.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "stub.h"
@@ -283,13 +284,49 @@ static struct stub_priv *stub_priv_pop_f
struct stub_priv *priv, *tmp;
list_for_each_entry_safe(priv, tmp, listhead, list) {
- list_del(&priv->list);
+ list_del_init(&priv->list);
return priv;
}
return NULL;
}
+void stub_free_priv_and_urb(struct stub_priv *priv)
+{
+ struct urb *urb;
+ int i;
+
+ for (i = 0; i < priv->num_urbs; i++) {
+ urb = priv->urbs[i];
+
+ if (!urb)
+ return;
+
+ kfree(urb->setup_packet);
+ urb->setup_packet = NULL;
+
+
+ if (urb->transfer_buffer && !priv->sgl) {
+ kfree(urb->transfer_buffer);
+ urb->transfer_buffer = NULL;
+ }
+
+ if (urb->num_sgs) {
+ sgl_free(urb->sg);
+ urb->sg = NULL;
+ urb->num_sgs = 0;
+ }
+
+ usb_free_urb(urb);
+ }
+ if (!list_empty(&priv->list))
+ list_del(&priv->list);
+ if (priv->sgl)
+ sgl_free(priv->sgl);
+ kfree(priv->urbs);
+ kmem_cache_free(stub_priv_cache, priv);
+}
+
static struct stub_priv *stub_priv_pop(struct stub_device *sdev)
{
unsigned long flags;
@@ -316,25 +353,15 @@ done:
void stub_device_cleanup_urbs(struct stub_device *sdev)
{
struct stub_priv *priv;
- struct urb *urb;
+ int i;
dev_dbg(&sdev->udev->dev, "Stub device cleaning up urbs\n");
while ((priv = stub_priv_pop(sdev))) {
- urb = priv->urb;
- dev_dbg(&sdev->udev->dev, "free urb seqnum %lu\n",
- priv->seqnum);
- usb_kill_urb(urb);
-
- kmem_cache_free(stub_priv_cache, priv);
+ for (i = 0; i < priv->num_urbs; i++)
+ usb_kill_urb(priv->urbs[i]);
- kfree(urb->transfer_buffer);
- urb->transfer_buffer = NULL;
-
- kfree(urb->setup_packet);
- urb->setup_packet = NULL;
-
- usb_free_urb(urb);
+ stub_free_priv_and_urb(priv);
}
}
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -7,6 +7,7 @@
#include <linux/kthread.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "stub.h"
@@ -201,7 +202,7 @@ static void tweak_special_requests(struc
static int stub_recv_cmd_unlink(struct stub_device *sdev,
struct usbip_header *pdu)
{
- int ret;
+ int ret, i;
unsigned long flags;
struct stub_priv *priv;
@@ -246,12 +247,14 @@ static int stub_recv_cmd_unlink(struct s
* so a driver in a client host will know the failure
* of the unlink request ?
*/
- ret = usb_unlink_urb(priv->urb);
- if (ret != -EINPROGRESS)
- dev_err(&priv->urb->dev->dev,
- "failed to unlink a urb # %lu, ret %d\n",
- priv->seqnum, ret);
-
+ for (i = priv->completed_urbs; i < priv->num_urbs; i++) {
+ ret = usb_unlink_urb(priv->urbs[i]);
+ if (ret != -EINPROGRESS)
+ dev_err(&priv->urbs[i]->dev->dev,
+ "failed to unlink %d/%d urb of seqnum %lu, ret %d\n",
+ i + 1, priv->num_urbs,
+ priv->seqnum, ret);
+ }
return 0;
}
@@ -433,14 +436,36 @@ static void masking_bogus_flags(struct u
urb->transfer_flags &= allowed;
}
+static int stub_recv_xbuff(struct usbip_device *ud, struct stub_priv *priv)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < priv->num_urbs; i++) {
+ ret = usbip_recv_xbuff(ud, priv->urbs[i]);
+ if (ret < 0)
+ break;
+ }
+
+ return ret;
+}
+
static void stub_recv_cmd_submit(struct stub_device *sdev,
struct usbip_header *pdu)
{
- int ret;
struct stub_priv *priv;
struct usbip_device *ud = &sdev->ud;
struct usb_device *udev = sdev->udev;
+ struct scatterlist *sgl = NULL, *sg;
+ void *buffer = NULL;
+ unsigned long long buf_len;
+ int nents;
+ int num_urbs = 1;
int pipe = get_pipe(sdev, pdu);
+ int use_sg = pdu->u.cmd_submit.transfer_flags & URB_DMA_MAP_SG;
+ int support_sg = 1;
+ int np = 0;
+ int ret, i;
if (pipe == -1)
return;
@@ -449,76 +474,139 @@ static void stub_recv_cmd_submit(struct
if (!priv)
return;
- /* setup a urb */
- if (usb_pipeisoc(pipe))
- priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets,
- GFP_KERNEL);
- else
- priv->urb = usb_alloc_urb(0, GFP_KERNEL);
+ buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length;
- if (!priv->urb) {
- usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
- return;
+ /* allocate urb transfer buffer, if needed */
+ if (buf_len) {
+ if (use_sg) {
+ sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
+ if (!sgl)
+ goto err_malloc;
+ } else {
+ buffer = kzalloc(buf_len, GFP_KERNEL);
+ if (!buffer)
+ goto err_malloc;
+ }
}
- /* allocate urb transfer buffer, if needed */
- if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
- priv->urb->transfer_buffer =
- kzalloc(pdu->u.cmd_submit.transfer_buffer_length,
- GFP_KERNEL);
- if (!priv->urb->transfer_buffer) {
+ /* Check if the server's HCD supports SG */
+ if (use_sg && !udev->bus->sg_tablesize) {
+ /*
+ * If the server's HCD doesn't support SG, break a single SG
+ * request into several URBs and map each SG list entry to
+ * corresponding URB buffer. The previously allocated SG
+ * list is stored in priv->sgl (If the server's HCD support SG,
+ * SG list is stored only in urb->sg) and it is used as an
+ * indicator that the server split single SG request into
+ * several URBs. Later, priv->sgl is used by stub_complete() and
+ * stub_send_ret_submit() to reassemble the divied URBs.
+ */
+ support_sg = 0;
+ num_urbs = nents;
+ priv->completed_urbs = 0;
+ pdu->u.cmd_submit.transfer_flags &= ~URB_DMA_MAP_SG;
+ }
+
+ /* allocate urb array */
+ priv->num_urbs = num_urbs;
+ priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL);
+ if (!priv->urbs)
+ goto err_urbs;
+
+ /* setup a urb */
+ if (support_sg) {
+ if (usb_pipeisoc(pipe))
+ np = pdu->u.cmd_submit.number_of_packets;
+
+ priv->urbs[0] = usb_alloc_urb(np, GFP_KERNEL);
+ if (!priv->urbs[0])
+ goto err_urb;
+
+ if (buf_len) {
+ if (use_sg) {
+ priv->urbs[0]->sg = sgl;
+ priv->urbs[0]->num_sgs = nents;
+ priv->urbs[0]->transfer_buffer = NULL;
+ } else {
+ priv->urbs[0]->transfer_buffer = buffer;
+ }
+ }
+
+ /* copy urb setup packet */
+ priv->urbs[0]->setup_packet = kmemdup(&pdu->u.cmd_submit.setup,
+ 8, GFP_KERNEL);
+ if (!priv->urbs[0]->setup_packet) {
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
return;
}
- }
- /* copy urb setup packet */
- priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8,
- GFP_KERNEL);
- if (!priv->urb->setup_packet) {
- dev_err(&udev->dev, "allocate setup_packet\n");
- usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
- return;
+ usbip_pack_pdu(pdu, priv->urbs[0], USBIP_CMD_SUBMIT, 0);
+ } else {
+ for_each_sg(sgl, sg, nents, i) {
+ priv->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
+ /* The URBs which is previously allocated will be freed
+ * in stub_device_cleanup_urbs() if error occurs.
+ */
+ if (!priv->urbs[i])
+ goto err_urb;
+
+ usbip_pack_pdu(pdu, priv->urbs[i], USBIP_CMD_SUBMIT, 0);
+ priv->urbs[i]->transfer_buffer = sg_virt(sg);
+ priv->urbs[i]->transfer_buffer_length = sg->length;
+ }
+ priv->sgl = sgl;
}
- /* set other members from the base header of pdu */
- priv->urb->context = (void *) priv;
- priv->urb->dev = udev;
- priv->urb->pipe = pipe;
- priv->urb->complete = stub_complete;
+ for (i = 0; i < num_urbs; i++) {
+ /* set other members from the base header of pdu */
+ priv->urbs[i]->context = (void *) priv;
+ priv->urbs[i]->dev = udev;
+ priv->urbs[i]->pipe = pipe;
+ priv->urbs[i]->complete = stub_complete;
- usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0);
+ /* no need to submit an intercepted request, but harmless? */
+ tweak_special_requests(priv->urbs[i]);
+ masking_bogus_flags(priv->urbs[i]);
+ }
- if (usbip_recv_xbuff(ud, priv->urb) < 0)
+ if (stub_recv_xbuff(ud, priv) < 0)
return;
- if (usbip_recv_iso(ud, priv->urb) < 0)
+ if (usbip_recv_iso(ud, priv->urbs[0]) < 0)
return;
- /* no need to submit an intercepted request, but harmless? */
- tweak_special_requests(priv->urb);
-
- masking_bogus_flags(priv->urb);
/* urb is now ready to submit */
- ret = usb_submit_urb(priv->urb, GFP_KERNEL);
-
- if (ret == 0)
- usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
- pdu->base.seqnum);
- else {
- dev_err(&udev->dev, "submit_urb error, %d\n", ret);
- usbip_dump_header(pdu);
- usbip_dump_urb(priv->urb);
+ for (i = 0; i < priv->num_urbs; i++) {
+ ret = usb_submit_urb(priv->urbs[i], GFP_KERNEL);
- /*
- * Pessimistic.
- * This connection will be discarded.
- */
- usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
+ if (ret == 0)
+ usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
+ pdu->base.seqnum);
+ else {
+ dev_err(&udev->dev, "submit_urb error, %d\n", ret);
+ usbip_dump_header(pdu);
+ usbip_dump_urb(priv->urbs[i]);
+
+ /*
+ * Pessimistic.
+ * This connection will be discarded.
+ */
+ usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
+ break;
+ }
}
usbip_dbg_stub_rx("Leave\n");
+ return;
+
+err_urb:
+ kfree(priv->urbs);
+err_urbs:
+ kfree(buffer);
+ sgl_free(sgl);
+err_malloc:
+ usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
}
/* recv a pdu */
--- a/drivers/usb/usbip/stub_tx.c
+++ b/drivers/usb/usbip/stub_tx.c
@@ -5,25 +5,11 @@
#include <linux/kthread.h>
#include <linux/socket.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "stub.h"
-static void stub_free_priv_and_urb(struct stub_priv *priv)
-{
- struct urb *urb = priv->urb;
-
- kfree(urb->setup_packet);
- urb->setup_packet = NULL;
-
- kfree(urb->transfer_buffer);
- urb->transfer_buffer = NULL;
-
- list_del(&priv->list);
- kmem_cache_free(stub_priv_cache, priv);
- usb_free_urb(urb);
-}
-
/* be in spin_lock_irqsave(&sdev->priv_lock, flags) */
void stub_enqueue_ret_unlink(struct stub_device *sdev, __u32 seqnum,
__u32 status)
@@ -85,6 +71,22 @@ void stub_complete(struct urb *urb)
break;
}
+ /*
+ * If the server breaks single SG request into the several URBs, the
+ * URBs must be reassembled before sending completed URB to the vhci.
+ * Don't wake up the tx thread until all the URBs are completed.
+ */
+ if (priv->sgl) {
+ priv->completed_urbs++;
+
+ /* Only save the first error status */
+ if (urb->status && !priv->urb_status)
+ priv->urb_status = urb->status;
+
+ if (priv->completed_urbs < priv->num_urbs)
+ return;
+ }
+
/* link a urb to the queue of tx. */
spin_lock_irqsave(&sdev->priv_lock, flags);
if (sdev->ud.tcp_socket == NULL) {
@@ -156,18 +158,22 @@ static int stub_send_ret_submit(struct s
size_t total_size = 0;
while ((priv = dequeue_from_priv_tx(sdev)) != NULL) {
- int ret;
- struct urb *urb = priv->urb;
+ struct urb *urb = priv->urbs[0];
struct usbip_header pdu_header;
struct usbip_iso_packet_descriptor *iso_buffer = NULL;
struct kvec *iov = NULL;
+ struct scatterlist *sg;
+ u32 actual_length = 0;
int iovnum = 0;
+ int ret;
+ int i;
txsize = 0;
memset(&pdu_header, 0, sizeof(pdu_header));
memset(&msg, 0, sizeof(msg));
- if (urb->actual_length > 0 && !urb->transfer_buffer) {
+ if (urb->actual_length > 0 && !urb->transfer_buffer &&
+ !urb->num_sgs) {
dev_err(&sdev->udev->dev,
"urb: actual_length %d transfer_buffer null\n",
urb->actual_length);
@@ -176,6 +182,11 @@ static int stub_send_ret_submit(struct s
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
iovnum = 2 + urb->number_of_packets;
+ else if (usb_pipein(urb->pipe) && urb->actual_length > 0 &&
+ urb->num_sgs)
+ iovnum = 1 + urb->num_sgs;
+ else if (usb_pipein(urb->pipe) && priv->sgl)
+ iovnum = 1 + priv->num_urbs;
else
iovnum = 2;
@@ -192,6 +203,15 @@ static int stub_send_ret_submit(struct s
setup_ret_submit_pdu(&pdu_header, urb);
usbip_dbg_stub_tx("setup txdata seqnum: %d\n",
pdu_header.base.seqnum);
+
+ if (priv->sgl) {
+ for (i = 0; i < priv->num_urbs; i++)
+ actual_length += priv->urbs[i]->actual_length;
+
+ pdu_header.u.ret_submit.status = priv->urb_status;
+ pdu_header.u.ret_submit.actual_length = actual_length;
+ }
+
usbip_header_correct_endian(&pdu_header, 1);
iov[iovnum].iov_base = &pdu_header;
@@ -200,12 +220,47 @@ static int stub_send_ret_submit(struct s
txsize += sizeof(pdu_header);
/* 2. setup transfer buffer */
- if (usb_pipein(urb->pipe) &&
+ if (usb_pipein(urb->pipe) && priv->sgl) {
+ /* If the server split a single SG request into several
+ * URBs because the server's HCD doesn't support SG,
+ * reassemble the split URB buffers into a single
+ * return command.
+ */
+ for (i = 0; i < priv->num_urbs; i++) {
+ iov[iovnum].iov_base =
+ priv->urbs[i]->transfer_buffer;
+ iov[iovnum].iov_len =
+ priv->urbs[i]->actual_length;
+ iovnum++;
+ }
+ txsize += actual_length;
+ } else if (usb_pipein(urb->pipe) &&
usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS &&
urb->actual_length > 0) {
- iov[iovnum].iov_base = urb->transfer_buffer;
- iov[iovnum].iov_len = urb->actual_length;
- iovnum++;
+ if (urb->num_sgs) {
+ unsigned int copy = urb->actual_length;
+ int size;
+
+ for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ if (copy == 0)
+ break;
+
+ if (copy < sg->length)
+ size = copy;
+ else
+ size = sg->length;
+
+ iov[iovnum].iov_base = sg_virt(sg);
+ iov[iovnum].iov_len = size;
+
+ iovnum++;
+ copy -= size;
+ }
+ } else {
+ iov[iovnum].iov_base = urb->transfer_buffer;
+ iov[iovnum].iov_len = urb->actual_length;
+ iovnum++;
+ }
txsize += urb->actual_length;
} else if (usb_pipein(urb->pipe) &&
usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
--- a/drivers/usb/usbip/usbip_common.c
+++ b/drivers/usb/usbip/usbip_common.c
@@ -680,8 +680,12 @@ EXPORT_SYMBOL_GPL(usbip_pad_iso);
/* some members of urb must be substituted before. */
int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb)
{
- int ret;
+ struct scatterlist *sg;
+ int ret = 0;
+ int recv;
int size;
+ int copy;
+ int i;
if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC) {
/* the direction of urb must be OUT. */
@@ -701,29 +705,48 @@ int usbip_recv_xbuff(struct usbip_device
if (!(size > 0))
return 0;
- if (size > urb->transfer_buffer_length) {
+ if (size > urb->transfer_buffer_length)
/* should not happen, probably malicious packet */
- if (ud->side == USBIP_STUB) {
- usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
- return 0;
- } else {
- usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
- return -EPIPE;
- }
- }
+ goto error;
+
+ if (urb->num_sgs) {
+ copy = size;
+ for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ int recv_size;
+
+ if (copy < sg->length)
+ recv_size = copy;
+ else
+ recv_size = sg->length;
+
+ recv = usbip_recv(ud->tcp_socket, sg_virt(sg),
+ recv_size);
- ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size);
- if (ret != size) {
- dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret);
- if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC) {
- usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
- } else {
- usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
- return -EPIPE;
+ if (recv != recv_size)
+ goto error;
+
+ copy -= recv;
+ ret += recv;
}
+
+ if (ret != size)
+ goto error;
+ } else {
+ ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size);
+ if (ret != size)
+ goto error;
}
return ret;
+
+error:
+ dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret);
+ if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC)
+ usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
+ else
+ usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+
+ return -EPIPE;
}
EXPORT_SYMBOL_GPL(usbip_recv_xbuff);
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -702,7 +702,8 @@ static int vhci_urb_enqueue(struct usb_h
}
vdev = &vhci_hcd->vdev[portnum-1];
- if (!urb->transfer_buffer && urb->transfer_buffer_length) {
+ if (!urb->transfer_buffer && !urb->num_sgs &&
+ urb->transfer_buffer_length) {
dev_dbg(dev, "Null URB transfer buffer\n");
return -EINVAL;
}
@@ -1148,6 +1149,15 @@ static int vhci_setup(struct usb_hcd *hc
hcd->speed = HCD_USB3;
hcd->self.root_hub->speed = USB_SPEED_SUPER;
}
+
+ /*
+ * Support SG.
+ * sg_tablesize is an arbitrary value to alleviate memory pressure
+ * on the host.
+ */
+ hcd->self.sg_tablesize = 32;
+ hcd->self.no_sg_constraint = 1;
+
return 0;
}
--- a/drivers/usb/usbip/vhci_rx.c
+++ b/drivers/usb/usbip/vhci_rx.c
@@ -90,6 +90,9 @@ static void vhci_recv_ret_submit(struct
if (usbip_dbg_flag_vhci_rx)
usbip_dump_urb(urb);
+ if (urb->num_sgs)
+ urb->transfer_flags &= ~URB_DMA_MAP_SG;
+
usbip_dbg_vhci_rx("now giveback urb %u\n", pdu->base.seqnum);
spin_lock_irqsave(&vhci->lock, flags);
--- a/drivers/usb/usbip/vhci_tx.c
+++ b/drivers/usb/usbip/vhci_tx.c
@@ -5,6 +5,7 @@
#include <linux/kthread.h>
#include <linux/slab.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "vhci.h"
@@ -50,19 +51,23 @@ static struct vhci_priv *dequeue_from_pr
static int vhci_send_cmd_submit(struct vhci_device *vdev)
{
+ struct usbip_iso_packet_descriptor *iso_buffer = NULL;
struct vhci_priv *priv = NULL;
+ struct scatterlist *sg;
struct msghdr msg;
- struct kvec iov[3];
+ struct kvec *iov;
size_t txsize;
size_t total_size = 0;
+ int iovnum;
+ int err = -ENOMEM;
+ int i;
while ((priv = dequeue_from_priv_tx(vdev)) != NULL) {
int ret;
struct urb *urb = priv->urb;
struct usbip_header pdu_header;
- struct usbip_iso_packet_descriptor *iso_buffer = NULL;
txsize = 0;
memset(&pdu_header, 0, sizeof(pdu_header));
@@ -72,18 +77,45 @@ static int vhci_send_cmd_submit(struct v
usbip_dbg_vhci_tx("setup txdata urb seqnum %lu\n",
priv->seqnum);
+ if (urb->num_sgs && usb_pipeout(urb->pipe))
+ iovnum = 2 + urb->num_sgs;
+ else
+ iovnum = 3;
+
+ iov = kcalloc(iovnum, sizeof(*iov), GFP_KERNEL);
+ if (!iov) {
+ usbip_event_add(&vdev->ud, SDEV_EVENT_ERROR_MALLOC);
+ return -ENOMEM;
+ }
+
+ if (urb->num_sgs)
+ urb->transfer_flags |= URB_DMA_MAP_SG;
+
/* 1. setup usbip_header */
setup_cmd_submit_pdu(&pdu_header, urb);
usbip_header_correct_endian(&pdu_header, 1);
+ iovnum = 0;
- iov[0].iov_base = &pdu_header;
- iov[0].iov_len = sizeof(pdu_header);
+ iov[iovnum].iov_base = &pdu_header;
+ iov[iovnum].iov_len = sizeof(pdu_header);
txsize += sizeof(pdu_header);
+ iovnum++;
/* 2. setup transfer buffer */
if (!usb_pipein(urb->pipe) && urb->transfer_buffer_length > 0) {
- iov[1].iov_base = urb->transfer_buffer;
- iov[1].iov_len = urb->transfer_buffer_length;
+ if (urb->num_sgs &&
+ !usb_endpoint_xfer_isoc(&urb->ep->desc)) {
+ for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ iov[iovnum].iov_base = sg_virt(sg);
+ iov[iovnum].iov_len = sg->length;
+ iovnum++;
+ }
+ } else {
+ iov[iovnum].iov_base = urb->transfer_buffer;
+ iov[iovnum].iov_len =
+ urb->transfer_buffer_length;
+ iovnum++;
+ }
txsize += urb->transfer_buffer_length;
}
@@ -95,23 +127,26 @@ static int vhci_send_cmd_submit(struct v
if (!iso_buffer) {
usbip_event_add(&vdev->ud,
SDEV_EVENT_ERROR_MALLOC);
- return -1;
+ goto err_iso_buffer;
}
- iov[2].iov_base = iso_buffer;
- iov[2].iov_len = len;
+ iov[iovnum].iov_base = iso_buffer;
+ iov[iovnum].iov_len = len;
+ iovnum++;
txsize += len;
}
- ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 3, txsize);
+ ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, iovnum,
+ txsize);
if (ret != txsize) {
pr_err("sendmsg failed!, ret=%d for %zd\n", ret,
txsize);
- kfree(iso_buffer);
usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP);
- return -1;
+ err = -EPIPE;
+ goto err_tx;
}
+ kfree(iov);
kfree(iso_buffer);
usbip_dbg_vhci_tx("send txdata\n");
@@ -119,6 +154,13 @@ static int vhci_send_cmd_submit(struct v
}
return total_size;
+
+err_tx:
+ kfree(iso_buffer);
+err_iso_buffer:
+ kfree(iov);
+
+ return err;
}
static struct vhci_unlink *dequeue_from_unlink_tx(struct vhci_device *vdev)
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 069/125] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (67 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 068/125] usbip: Implement SG support to vhci-hcd and stub driver Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 070/125] HID: google: add magnemite/masterball USB ids Greg Kroah-Hartman
` (59 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vidya Sagar, Lorenzo Pieralisi,
Thierry Reding
From: Vidya Sagar <vidyas@nvidia.com>
commit 7be142caabc4780b13a522c485abc806de5c4114 upstream.
The PCI Tegra controller conversion to a device tree configurable
driver in commit d1523b52bff3 ("PCI: tegra: Move PCIe driver
to drivers/pci/host") implied that code for the driver can be
compiled in for a kernel supporting multiple platforms.
Unfortunately, a blind move of the code did not check that some of the
quirks that were applied in arch/arm (eg enabling Relaxed Ordering on
all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID
for both Vendor-ID and Device-ID) are now applied in all kernels that
compile the PCI Tegra controlled driver, DT and ACPI alike.
This is completely wrong, in that enablement of Relaxed Ordering is only
required by default in Tegra20 platforms as described in the Tegra20
Technical Reference Manual (available at
https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in
Section 34.1, where it is mentioned that Relaxed Ordering bit needs to
be enabled in its root ports to avoid deadlock in hardware) and in the
Tegra30 platforms for the same reasons (unfortunately not documented
in the TRM).
There is no other strict requirement on PCI devices Relaxed Ordering
enablement on any other Tegra platforms or PCI host bridge driver.
Fix this quite upsetting situation by limiting the vendor and device IDs
to which the Relaxed Ordering quirk applies to the root ports in
question, reported above.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-tegra.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -545,12 +545,15 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NV
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_fixup_class);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_fixup_class);
-/* Tegra PCIE requires relaxed ordering */
+/* Tegra20 and Tegra30 PCIE requires relaxed ordering */
static void tegra_pcie_relax_enable(struct pci_dev *dev)
{
pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_relax_enable);
static int tegra_pcie_request_resources(struct tegra_pcie *pcie)
{
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 070/125] HID: google: add magnemite/masterball USB ids
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (68 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 069/125] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30 Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 071/125] dmaengine: xilinx_dma: Fix control reg update in vdma_channel_set_config Greg Kroah-Hartman
` (58 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicolas Boichat, Jiri Kosina, Sasha Levin
From: Nicolas Boichat <drinkcat@chromium.org>
[ Upstream commit 9e4dbc4646a84b2562ea7c64a542740687ff7daf ]
Add 2 additional hammer-like devices.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-google-hammer.c | 4 ++++
drivers/hid/hid-ids.h | 2 ++
2 files changed, 6 insertions(+)
diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
index 6bf4da7ad63a5..8cb63ea9977d6 100644
--- a/drivers/hid/hid-google-hammer.c
+++ b/drivers/hid/hid-google-hammer.c
@@ -120,6 +120,10 @@ static int hammer_input_configured(struct hid_device *hdev,
static const struct hid_device_id hammer_devices[] = {
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) },
+ { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+ USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_MAGNEMITE) },
+ { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+ USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_MASTERBALL) },
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_STAFF) },
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 6b33117ca60e5..02c263a4c0836 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -466,6 +466,8 @@
#define USB_DEVICE_ID_GOOGLE_STAFF 0x502b
#define USB_DEVICE_ID_GOOGLE_WAND 0x502d
#define USB_DEVICE_ID_GOOGLE_WHISKERS 0x5030
+#define USB_DEVICE_ID_GOOGLE_MASTERBALL 0x503c
+#define USB_DEVICE_ID_GOOGLE_MAGNEMITE 0x503d
#define USB_VENDOR_ID_GOTOP 0x08f2
#define USB_DEVICE_ID_SUPER_Q2 0x007f
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 071/125] dmaengine: xilinx_dma: Fix control reg update in vdma_channel_set_config
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (69 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 070/125] HID: google: add magnemite/masterball USB ids Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 072/125] dmaengine: sprd: Fix the possible memory leak issue Greg Kroah-Hartman
` (57 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Radhey Shyam Pandey,
Appana Durga Kedareswara rao, Michal Simek, Vinod Koul,
Sasha Levin
From: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
[ Upstream commit 6c6de1ddb1be3840f2ed5cc9d009a622720940c9 ]
In vdma_channel_set_config clear the delay, frame count and master mask
before updating their new values. It avoids programming incorrect state
when input parameters are different from default.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Acked-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1569495060-18117-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/xilinx/xilinx_dma.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index c124423125951..8aec137b4fcaa 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -72,6 +72,9 @@
#define XILINX_DMA_DMACR_CIRC_EN BIT(1)
#define XILINX_DMA_DMACR_RUNSTOP BIT(0)
#define XILINX_DMA_DMACR_FSYNCSRC_MASK GENMASK(6, 5)
+#define XILINX_DMA_DMACR_DELAY_MASK GENMASK(31, 24)
+#define XILINX_DMA_DMACR_FRAME_COUNT_MASK GENMASK(23, 16)
+#define XILINX_DMA_DMACR_MASTER_MASK GENMASK(11, 8)
#define XILINX_DMA_REG_DMASR 0x0004
#define XILINX_DMA_DMASR_EOL_LATE_ERR BIT(15)
@@ -2112,8 +2115,10 @@ int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
chan->config.gen_lock = cfg->gen_lock;
chan->config.master = cfg->master;
+ dmacr &= ~XILINX_DMA_DMACR_GENLOCK_EN;
if (cfg->gen_lock && chan->genlock) {
dmacr |= XILINX_DMA_DMACR_GENLOCK_EN;
+ dmacr &= ~XILINX_DMA_DMACR_MASTER_MASK;
dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT;
}
@@ -2129,11 +2134,13 @@ int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
chan->config.delay = cfg->delay;
if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) {
+ dmacr &= ~XILINX_DMA_DMACR_FRAME_COUNT_MASK;
dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT;
chan->config.coalesc = cfg->coalesc;
}
if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) {
+ dmacr &= ~XILINX_DMA_DMACR_DELAY_MASK;
dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT;
chan->config.delay = cfg->delay;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 072/125] dmaengine: sprd: Fix the possible memory leak issue
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (70 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 071/125] dmaengine: xilinx_dma: Fix control reg update in vdma_channel_set_config Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 073/125] HID: intel-ish-hid: fix wrong error handling in ishtp_cl_alloc_tx_ring() Greg Kroah-Hartman
` (56 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zhenfang Wang, Baolin Wang,
Vinod Koul, Sasha Levin
From: Baolin Wang <baolin.wang@linaro.org>
[ Upstream commit ec1ac309596a7bdf206743b092748205f6cd5720 ]
If we terminate the channel to free all descriptors associated with this
channel, we will leak the memory of current descriptor if the current
descriptor is not completed, since it had been deteled from the desc_issued
list and have not been added into the desc_completed list.
Thus we should check if current descriptor is completed or not, when freeing
the descriptors associated with one channel, if not, we should free it to
avoid this issue.
Fixes: 9b3b8171f7f4 ("dmaengine: sprd: Add Spreadtrum DMA driver")
Reported-by: Zhenfang Wang <zhenfang.wang@unisoc.com>
Tested-by: Zhenfang Wang <zhenfang.wang@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/170dbbc6d5366b6fa974ce2d366652e23a334251.1570609788.git.baolin.wang@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/sprd-dma.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 1ed1c7efa2885..9e8ce56a83d8a 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -181,6 +181,7 @@ struct sprd_dma_dev {
struct sprd_dma_chn channels[0];
};
+static void sprd_dma_free_desc(struct virt_dma_desc *vd);
static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param);
static struct of_dma_filter_info sprd_dma_info = {
.filter_fn = sprd_dma_filter_fn,
@@ -493,12 +494,19 @@ static int sprd_dma_alloc_chan_resources(struct dma_chan *chan)
static void sprd_dma_free_chan_resources(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct virt_dma_desc *cur_vd = NULL;
unsigned long flags;
spin_lock_irqsave(&schan->vc.lock, flags);
+ if (schan->cur_desc)
+ cur_vd = &schan->cur_desc->vd;
+
sprd_dma_stop(schan);
spin_unlock_irqrestore(&schan->vc.lock, flags);
+ if (cur_vd)
+ sprd_dma_free_desc(cur_vd);
+
vchan_free_chan_resources(&schan->vc);
pm_runtime_put(chan->device->dev);
}
@@ -814,15 +822,22 @@ static int sprd_dma_resume(struct dma_chan *chan)
static int sprd_dma_terminate_all(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct virt_dma_desc *cur_vd = NULL;
unsigned long flags;
LIST_HEAD(head);
spin_lock_irqsave(&schan->vc.lock, flags);
+ if (schan->cur_desc)
+ cur_vd = &schan->cur_desc->vd;
+
sprd_dma_stop(schan);
vchan_get_all_descriptors(&schan->vc, &head);
spin_unlock_irqrestore(&schan->vc.lock, flags);
+ if (cur_vd)
+ sprd_dma_free_desc(cur_vd);
+
vchan_dma_desc_free_list(&schan->vc, &head);
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 073/125] HID: intel-ish-hid: fix wrong error handling in ishtp_cl_alloc_tx_ring()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (71 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 072/125] dmaengine: sprd: Fix the possible memory leak issue Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 074/125] RDMA/mlx5: Clear old rate limit when closing QP Greg Kroah-Hartman
` (55 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zhang Lixu, Srinivas Pandruvada,
Jiri Kosina, Sasha Levin
From: Zhang Lixu <lixu.zhang@intel.com>
[ Upstream commit 16ff7bf6dbcc6f77d2eec1ac9120edf44213c2f1 ]
When allocating tx ring buffers failed, should free tx buffers, not rx buffers.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/intel-ish-hid/ishtp/client-buffers.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/intel-ish-hid/ishtp/client-buffers.c b/drivers/hid/intel-ish-hid/ishtp/client-buffers.c
index b9b917d2d50db..c41dbb167c91b 100644
--- a/drivers/hid/intel-ish-hid/ishtp/client-buffers.c
+++ b/drivers/hid/intel-ish-hid/ishtp/client-buffers.c
@@ -90,7 +90,7 @@ int ishtp_cl_alloc_tx_ring(struct ishtp_cl *cl)
return 0;
out:
dev_err(&cl->device->dev, "error in allocating Tx pool\n");
- ishtp_cl_free_rx_ring(cl);
+ ishtp_cl_free_tx_ring(cl);
return -ENOMEM;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 074/125] RDMA/mlx5: Clear old rate limit when closing QP
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (72 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 073/125] HID: intel-ish-hid: fix wrong error handling in ishtp_cl_alloc_tx_ring() Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 075/125] iw_cxgb4: fix ECN check on the passive accept Greg Kroah-Hartman
` (54 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rafi Wiener, Oleg Kuporosov,
Leon Romanovsky, Doug Ledford, Sasha Levin
From: Rafi Wiener <rafiw@mellanox.com>
[ Upstream commit c8973df2da677f375f8b12b6eefca2f44c8884d5 ]
Before QP is closed it changes to ERROR state, when this happens
the QP was left with old rate limit that was already removed from
the table.
Fixes: 7d29f349a4b9 ("IB/mlx5: Properly adjust rate limit on QP state transitions")
Signed-off-by: Rafi Wiener <rafiw@mellanox.com>
Signed-off-by: Oleg Kuporosov <olegk@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191002120243.16971-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/mlx5/qp.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 77b1f3fd086ad..900f85ce0fb08 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -2828,10 +2828,12 @@ static int modify_raw_packet_qp_sq(struct mlx5_core_dev *dev,
}
/* Only remove the old rate after new rate was set */
- if ((old_rl.rate &&
- !mlx5_rl_are_equal(&old_rl, &new_rl)) ||
- (new_state != MLX5_SQC_STATE_RDY))
+ if ((old_rl.rate && !mlx5_rl_are_equal(&old_rl, &new_rl)) ||
+ (new_state != MLX5_SQC_STATE_RDY)) {
mlx5_rl_remove_rate(dev, &old_rl);
+ if (new_state != MLX5_SQC_STATE_RDY)
+ memset(&new_rl, 0, sizeof(new_rl));
+ }
ibqp->rl = new_rl;
sq->state = new_state;
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 075/125] iw_cxgb4: fix ECN check on the passive accept
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (73 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 074/125] RDMA/mlx5: Clear old rate limit when closing QP Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 076/125] RDMA/qedr: Fix reported firmware version Greg Kroah-Hartman
` (53 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Potnuri Bharat Teja, Doug Ledford,
Sasha Levin
From: Potnuri Bharat Teja <bharat@chelsio.com>
[ Upstream commit 612e0486ad0845c41ac10492e78144f99e326375 ]
pass_accept_req() is using the same skb for handling accept request and
sending accept reply to HW. Here req and rpl structures are pointing to
same skb->data which is over written by INIT_TP_WR() and leads to
accessing corrupt req fields in accept_cr() while checking for ECN flags.
Reordered code in accept_cr() to fetch correct req fields.
Fixes: 92e7ae7172 ("iw_cxgb4: Choose appropriate hw mtu index and ISS for iWARP connections")
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20191003104353.11590-1-bharat@chelsio.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/cxgb4/cm.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 3be6405d9855e..566bfcc6add0d 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -2380,20 +2380,6 @@ static int accept_cr(struct c4iw_ep *ep, struct sk_buff *skb,
enum chip_type adapter_type = ep->com.dev->rdev.lldi.adapter_type;
pr_debug("ep %p tid %u\n", ep, ep->hwtid);
-
- skb_get(skb);
- rpl = cplhdr(skb);
- if (!is_t4(adapter_type)) {
- skb_trim(skb, roundup(sizeof(*rpl5), 16));
- rpl5 = (void *)rpl;
- INIT_TP_WR(rpl5, ep->hwtid);
- } else {
- skb_trim(skb, sizeof(*rpl));
- INIT_TP_WR(rpl, ep->hwtid);
- }
- OPCODE_TID(rpl) = cpu_to_be32(MK_OPCODE_TID(CPL_PASS_ACCEPT_RPL,
- ep->hwtid));
-
cxgb_best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps && req->tcpopt.tstamp,
(ep->com.remote_addr.ss_family == AF_INET) ? 0 : 1);
@@ -2439,6 +2425,20 @@ static int accept_cr(struct c4iw_ep *ep, struct sk_buff *skb,
if (tcph->ece && tcph->cwr)
opt2 |= CCTRL_ECN_V(1);
}
+
+ skb_get(skb);
+ rpl = cplhdr(skb);
+ if (!is_t4(adapter_type)) {
+ skb_trim(skb, roundup(sizeof(*rpl5), 16));
+ rpl5 = (void *)rpl;
+ INIT_TP_WR(rpl5, ep->hwtid);
+ } else {
+ skb_trim(skb, sizeof(*rpl));
+ INIT_TP_WR(rpl, ep->hwtid);
+ }
+ OPCODE_TID(rpl) = cpu_to_be32(MK_OPCODE_TID(CPL_PASS_ACCEPT_RPL,
+ ep->hwtid));
+
if (CHELSIO_CHIP_VERSION(adapter_type) > CHELSIO_T4) {
u32 isn = (prandom_u32() & ~7UL) - 1;
opt2 |= T5_OPT_2_VALID_F;
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 076/125] RDMA/qedr: Fix reported firmware version
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (74 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 075/125] iw_cxgb4: fix ECN check on the passive accept Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 077/125] net/mlx5e: TX, Fix consumer index of error cqe dump Greg Kroah-Hartman
` (52 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kamal Heib, Michal Kalderon ,
Doug Ledford, Sasha Levin
From: Kamal Heib <kamalheib1@gmail.com>
[ Upstream commit b806c94ee44e53233b8ce6c92d9078d9781786a5 ]
Remove spaces from the reported firmware version string.
Actual value:
$ cat /sys/class/infiniband/qedr0/fw_ver
8. 37. 7. 0
Expected value:
$ cat /sys/class/infiniband/qedr0/fw_ver
8.37.7.0
Fixes: ec72fce401c6 ("qedr: Add support for RoCE HW init")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Link: https://lore.kernel.org/r/20191007210730.7173-1-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/qedr/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/qedr/main.c b/drivers/infiniband/hw/qedr/main.c
index a0af6d424aeda..d1680d3b58250 100644
--- a/drivers/infiniband/hw/qedr/main.c
+++ b/drivers/infiniband/hw/qedr/main.c
@@ -77,7 +77,7 @@ static void qedr_get_dev_fw_str(struct ib_device *ibdev, char *str)
struct qedr_dev *qedr = get_qedr_dev(ibdev);
u32 fw_ver = (u32)qedr->attr.fw_ver;
- snprintf(str, IB_FW_VERSION_NAME_MAX, "%d. %d. %d. %d",
+ snprintf(str, IB_FW_VERSION_NAME_MAX, "%d.%d.%d.%d",
(fw_ver >> 24) & 0xFF, (fw_ver >> 16) & 0xFF,
(fw_ver >> 8) & 0xFF, fw_ver & 0xFF);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 077/125] net/mlx5e: TX, Fix consumer index of error cqe dump
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (75 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 076/125] RDMA/qedr: Fix reported firmware version Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 078/125] net/mlx5: prevent memory leak in mlx5_fpga_conn_create_cq Greg Kroah-Hartman
` (51 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tariq Toukan, Saeed Mahameed, Sasha Levin
From: Tariq Toukan <tariqt@mellanox.com>
[ Upstream commit 61ea02d2c13106116c6e4916ac5d9dd41151c959 ]
The completion queue consumer index increments upon a call to
mlx5_cqwq_pop().
When dumping an error CQE, the index is already incremented.
Decrease one for the print command.
Fixes: 16cc14d81733 ("net/mlx5e: Dump xmit error completions")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index 0b03d65474e93..73dce92c41c44 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -462,7 +462,10 @@ netdev_tx_t mlx5e_xmit(struct sk_buff *skb, struct net_device *dev)
static void mlx5e_dump_error_cqe(struct mlx5e_txqsq *sq,
struct mlx5_err_cqe *err_cqe)
{
- u32 ci = mlx5_cqwq_get_ci(&sq->cq.wq);
+ struct mlx5_cqwq *wq = &sq->cq.wq;
+ u32 ci;
+
+ ci = mlx5_cqwq_ctr2ix(wq, wq->cc - 1);
netdev_err(sq->channel->netdev,
"Error cqe on cqn 0x%x, ci 0x%x, sqn 0x%x, syndrome 0x%x, vendor syndrome 0x%x\n",
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 078/125] net/mlx5: prevent memory leak in mlx5_fpga_conn_create_cq
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (76 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 077/125] net/mlx5e: TX, Fix consumer index of error cqe dump Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 079/125] scsi: qla2xxx: fixup incorrect usage of host_byte Greg Kroah-Hartman
` (50 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Navid Emamdoost, Saeed Mahameed, Sasha Levin
From: Navid Emamdoost <navid.emamdoost@gmail.com>
[ Upstream commit c8c2a057fdc7de1cd16f4baa51425b932a42eb39 ]
In mlx5_fpga_conn_create_cq if mlx5_vector2eqn fails the allocated
memory should be released.
Fixes: 537a50574175 ("net/mlx5: FPGA, Add high-speed connection routines")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
index 8ca1d1949d930..d8d0b6bd5c5ae 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
@@ -462,8 +462,10 @@ static int mlx5_fpga_conn_create_cq(struct mlx5_fpga_conn *conn, int cq_size)
}
err = mlx5_vector2eqn(mdev, smp_processor_id(), &eqn, &irqn);
- if (err)
+ if (err) {
+ kvfree(in);
goto err_cqwq;
+ }
cqc = MLX5_ADDR_OF(create_cq_in, in, cq_context);
MLX5_SET(cqc, cqc, log_cq_size, ilog2(cq_size));
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 079/125] scsi: qla2xxx: fixup incorrect usage of host_byte
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (77 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 078/125] net/mlx5: prevent memory leak in mlx5_fpga_conn_create_cq Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 080/125] RDMA/uverbs: Prevent potential underflow Greg Kroah-Hartman
` (49 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hannes Reinecke, Himanshu Madhani,
Martin K. Petersen, Sasha Levin
From: Hannes Reinecke <hare@suse.com>
[ Upstream commit 66cf50e65b183c863825f5c28a818e3f47a72e40 ]
DRIVER_ERROR is a a driver byte setting, not a host byte. The qla2xxx
driver should rather return DID_ERROR here to be in line with the other
drivers.
Link: https://lore.kernel.org/r/20191018140458.108278-1-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_bsg.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 4a9fd8d944d60..85b03a7f473c1 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -258,7 +258,7 @@ qla2x00_process_els(struct bsg_job *bsg_job)
srb_t *sp;
const char *type;
int req_sg_cnt, rsp_sg_cnt;
- int rval = (DRIVER_ERROR << 16);
+ int rval = (DID_ERROR << 16);
uint16_t nextlid = 0;
if (bsg_request->msgcode == FC_BSG_RPT_ELS) {
@@ -433,7 +433,7 @@ qla2x00_process_ct(struct bsg_job *bsg_job)
struct Scsi_Host *host = fc_bsg_to_shost(bsg_job);
scsi_qla_host_t *vha = shost_priv(host);
struct qla_hw_data *ha = vha->hw;
- int rval = (DRIVER_ERROR << 16);
+ int rval = (DID_ERROR << 16);
int req_sg_cnt, rsp_sg_cnt;
uint16_t loop_id;
struct fc_port *fcport;
@@ -1948,7 +1948,7 @@ qlafx00_mgmt_cmd(struct bsg_job *bsg_job)
struct Scsi_Host *host = fc_bsg_to_shost(bsg_job);
scsi_qla_host_t *vha = shost_priv(host);
struct qla_hw_data *ha = vha->hw;
- int rval = (DRIVER_ERROR << 16);
+ int rval = (DID_ERROR << 16);
struct qla_mt_iocb_rqst_fx00 *piocb_rqst;
srb_t *sp;
int req_sg_cnt = 0, rsp_sg_cnt = 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 080/125] RDMA/uverbs: Prevent potential underflow
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (78 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 079/125] scsi: qla2xxx: fixup incorrect usage of host_byte Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 081/125] net: openvswitch: free vport unless register_netdevice() succeeds Greg Kroah-Hartman
` (48 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Jason Gunthorpe, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit a9018adfde809d44e71189b984fa61cc89682b5e ]
The issue is in drivers/infiniband/core/uverbs_std_types_cq.c in the
UVERBS_HANDLER(UVERBS_METHOD_CQ_CREATE) function. We check that:
if (attr.comp_vector >= attrs->ufile->device->num_comp_vectors) {
But we don't check if "attr.comp_vector" is negative. It could
potentially lead to an array underflow. My concern would be where
cq->vector is used in the create_cq() function from the cxgb4 driver.
And really "attr.comp_vector" is appears as a u32 to user space so that's
the right type to use.
Fixes: 9ee79fce3642 ("IB/core: Add completion queue (cq) object actions")
Link: https://lore.kernel.org/r/20191011133419.GA22905@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/uverbs.h | 2 +-
include/rdma/ib_verbs.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h
index 5df8e548cc146..4a14de2d8c716 100644
--- a/drivers/infiniband/core/uverbs.h
+++ b/drivers/infiniband/core/uverbs.h
@@ -98,7 +98,7 @@ ib_uverbs_init_udata_buf_or_null(struct ib_udata *udata,
struct ib_uverbs_device {
atomic_t refcount;
- int num_comp_vectors;
+ u32 num_comp_vectors;
struct completion comp;
struct device *dev;
struct ib_device __rcu *ib_dev;
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index b7d63c3970d18..f3d475024d376 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -310,7 +310,7 @@ struct ib_tm_caps {
struct ib_cq_init_attr {
unsigned int cqe;
- int comp_vector;
+ u32 comp_vector;
u32 flags;
};
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 081/125] net: openvswitch: free vport unless register_netdevice() succeeds
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (79 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 080/125] RDMA/uverbs: Prevent potential underflow Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 082/125] scsi: lpfc: Honor module parameter lpfc_use_adisc Greg Kroah-Hartman
` (47 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+13210896153522fe1ee5,
Taehee Yoo, Greg Rose, Eric Dumazet, Marcelo Ricardo Leitner,
Ying Xue, Andrey Konovalov, Hillf Danton, Pravin B Shelar,
Stefano Brivio, Jakub Kicinski, Sasha Levin
From: Hillf Danton <hdanton@sina.com>
[ Upstream commit 9464cc37f3671ee69cb1c00662b5e1f113a96b23 ]
syzbot found the following crash on:
HEAD commit: 1e78030e Merge tag 'mmc-v5.3-rc1' of git://git.kernel.org/..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=148d3d1a600000
kernel config: https://syzkaller.appspot.com/x/.config?x=30cef20daf3e9977
dashboard link: https://syzkaller.appspot.com/bug?extid=13210896153522fe1ee5
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
syz repro: https://syzkaller.appspot.com/x/repro.syz?x=136aa8c4600000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=109ba792600000
=====================================================================
BUG: memory leak
unreferenced object 0xffff8881207e4100 (size 128):
comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s)
hex dump (first 32 bytes):
00 70 16 18 81 88 ff ff 80 af 8c 22 81 88 ff ff .p........."....
00 b6 23 17 81 88 ff ff 00 00 00 00 00 00 00 00 ..#.............
backtrace:
[<000000000eb78212>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline]
[<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
[<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline]
[<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline]
[<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0 net/openvswitch/vport.c:130
[<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164
[<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199
[<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
[<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614
[<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629
[<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
[<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
[<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328
[<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917
[<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
[<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
[<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
[<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
[<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline]
[<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline]
[<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363
BUG: memory leak
unreferenced object 0xffff88811723b600 (size 64):
comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s)
hex dump (first 32 bytes):
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 02 00 00 00 05 35 82 c1 .............5..
backtrace:
[<00000000352f46d8>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<00000000352f46d8>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<00000000352f46d8>] slab_alloc mm/slab.c:3319 [inline]
[<00000000352f46d8>] __do_kmalloc mm/slab.c:3653 [inline]
[<00000000352f46d8>] __kmalloc+0x169/0x300 mm/slab.c:3664
[<000000008e48f3d1>] kmalloc include/linux/slab.h:557 [inline]
[<000000008e48f3d1>] ovs_vport_set_upcall_portids+0x54/0xd0 net/openvswitch/vport.c:343
[<00000000541e4f4a>] ovs_vport_alloc+0x7f/0xf0 net/openvswitch/vport.c:139
[<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164
[<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199
[<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
[<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614
[<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629
[<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
[<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
[<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328
[<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917
[<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
[<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
[<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
[<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
BUG: memory leak
unreferenced object 0xffff8881228ca500 (size 128):
comm "syz-executor032", pid 7015, jiffies 4294944622 (age 7.880s)
hex dump (first 32 bytes):
00 f0 27 18 81 88 ff ff 80 ac 8c 22 81 88 ff ff ..'........"....
40 b7 23 17 81 88 ff ff 00 00 00 00 00 00 00 00 @.#.............
backtrace:
[<000000000eb78212>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline]
[<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
[<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline]
[<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline]
[<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0 net/openvswitch/vport.c:130
[<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164
[<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199
[<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
[<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614
[<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629
[<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
[<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
[<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328
[<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917
[<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
[<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
[<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
[<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
[<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline]
[<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline]
[<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363
=====================================================================
The function in net core, register_netdevice(), may fail with vport's
destruction callback either invoked or not. After commit 309b66970ee2
("net: openvswitch: do not free vport if register_netdevice() is failed."),
the duty to destroy vport is offloaded from the driver OTOH, which ends
up in the memory leak reported.
It is fixed by releasing vport unless device is registered successfully.
To do that, the callback assignment is defered until device is registered.
Reported-by: syzbot+13210896153522fe1ee5@syzkaller.appspotmail.com
Fixes: 309b66970ee2 ("net: openvswitch: do not free vport if register_netdevice() is failed.")
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Greg Rose <gvrose8192@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
[sbrivio: this was sent to dev@openvswitch.org and never made its way
to netdev -- resending original patch]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/openvswitch/vport-internal_dev.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/net/openvswitch/vport-internal_dev.c b/net/openvswitch/vport-internal_dev.c
index 5a304cfc84233..d2356a284646c 100644
--- a/net/openvswitch/vport-internal_dev.c
+++ b/net/openvswitch/vport-internal_dev.c
@@ -149,7 +149,7 @@ static void do_setup(struct net_device *netdev)
netdev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_OPENVSWITCH |
IFF_NO_QUEUE;
netdev->needs_free_netdev = true;
- netdev->priv_destructor = internal_dev_destructor;
+ netdev->priv_destructor = NULL;
netdev->ethtool_ops = &internal_dev_ethtool_ops;
netdev->rtnl_link_ops = &internal_dev_link_ops;
@@ -171,7 +171,6 @@ static struct vport *internal_dev_create(const struct vport_parms *parms)
struct internal_dev *internal_dev;
struct net_device *dev;
int err;
- bool free_vport = true;
vport = ovs_vport_alloc(0, &ovs_internal_vport_ops, parms);
if (IS_ERR(vport)) {
@@ -202,10 +201,9 @@ static struct vport *internal_dev_create(const struct vport_parms *parms)
rtnl_lock();
err = register_netdevice(vport->dev);
- if (err) {
- free_vport = false;
+ if (err)
goto error_unlock;
- }
+ vport->dev->priv_destructor = internal_dev_destructor;
dev_set_promiscuity(vport->dev, 1);
rtnl_unlock();
@@ -219,8 +217,7 @@ error_unlock:
error_free_netdev:
free_netdev(dev);
error_free_vport:
- if (free_vport)
- ovs_vport_free(vport);
+ ovs_vport_free(vport);
error:
return ERR_PTR(err);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 082/125] scsi: lpfc: Honor module parameter lpfc_use_adisc
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (80 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 081/125] net: openvswitch: free vport unless register_netdevice() succeeds Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 083/125] scsi: qla2xxx: Initialized mailbox to prevent driver load failure Greg Kroah-Hartman
` (46 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dick Kennedy, James Smart,
Hannes Reinecke, Daniel Wagner, Martin K. Petersen, Sasha Levin
From: Daniel Wagner <dwagner@suse.de>
[ Upstream commit 0fd103ccfe6a06e40e2d9d8c91d96332cc9e1239 ]
The initial lpfc_desc_set_adisc implementation in commit
dea3101e0a5c ("lpfc: add Emulex FC driver version 8.0.28") enabled ADISC if
cfg_use_adisc && RSCN_MODE && FCP_2_DEVICE
In commit 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of
SLI-3") this changed to
(cfg_use_adisc && RSC_MODE) || FCP_2_DEVICE
and later in commit ffc954936b13 ("[SCSI] lpfc 8.3.13: FC Discovery Fixes
and enhancements.") to
(cfg_use_adisc && RSC_MODE) || (FCP_2_DEVICE && FCP_TARGET)
A customer reports that after a devloss, an ADISC failure is logged. It
turns out the ADISC flag is set even the user explicitly set lpfc_use_adisc
= 0.
[Sat Dec 22 22:55:58 2018] lpfc 0000:82:00.0: 2:(0):0203 Devloss timeout on WWPN 50:01:43:80:12:8e:40:20 NPort x05df00 Data: x82000000 x8 xa
[Sat Dec 22 23:08:20 2018] lpfc 0000:82:00.0: 2:(0):2755 ADISC failure DID:05DF00 Status:x9/x70000
[mkp: fixed Hannes' email]
Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: James Smart <james.smart@broadcom.com>
Link: https://lore.kernel.org/r/20191022072112.132268-1-dwagner@suse.de
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/lpfc/lpfc_nportdisc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index a6619fd8238c1..ae6301c796785 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -844,9 +844,9 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
if (!(vport->fc_flag & FC_PT2PT)) {
/* Check config parameter use-adisc or FCP-2 */
- if ((vport->cfg_use_adisc && (vport->fc_flag & FC_RSCN_MODE)) ||
+ if (vport->cfg_use_adisc && ((vport->fc_flag & FC_RSCN_MODE) ||
((ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) &&
- (ndlp->nlp_type & NLP_FCP_TARGET))) {
+ (ndlp->nlp_type & NLP_FCP_TARGET)))) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_ADISC;
spin_unlock_irq(shost->host_lock);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 083/125] scsi: qla2xxx: Initialized mailbox to prevent driver load failure
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (81 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 082/125] scsi: lpfc: Honor module parameter lpfc_use_adisc Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 084/125] netfilter: nf_flow_table: set timeout before insertion into hashes Greg Kroah-Hartman
` (45 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Himanshu Madhani, Martin K. Petersen,
Sasha Levin
From: Himanshu Madhani <hmadhani@marvell.com>
[ Upstream commit c2ff2a36eff60efb5e123c940115216d6bf65684 ]
This patch fixes issue with Gen7 adapter in a blade environment where one
of the ports will not be detected by driver. Firmware expects mailbox 11 to
be set or cleared by driver for newer ISP.
Following message is seen in the log file:
[ 18.810892] qla2xxx [0000:d8:00.0]-1820:1: **** Failed=102 mb[0]=4005 mb[1]=37 mb[2]=20 mb[3]=8
[ 18.819596] cmd=2 ****
[mkp: typos]
Link: https://lore.kernel.org/r/20191022193643.7076-2-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_mbx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 84f57f075455e..128fcff24f1be 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -684,6 +684,7 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
mcp->mb[2] = LSW(risc_addr);
mcp->mb[3] = 0;
mcp->mb[4] = 0;
+ mcp->mb[11] = 0;
ha->flags.using_lr_setting = 0;
if (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
IS_QLA27XX(ha)) {
@@ -727,7 +728,7 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
if (ha->flags.exchoffld_enabled)
mcp->mb[4] |= ENABLE_EXCHANGE_OFFLD;
- mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1;
+ mcp->out_mb |= MBX_4 | MBX_3 | MBX_2 | MBX_1 | MBX_11;
mcp->in_mb |= MBX_3 | MBX_2 | MBX_1;
} else {
mcp->mb[1] = LSW(risc_addr);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 084/125] netfilter: nf_flow_table: set timeout before insertion into hashes
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (82 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 083/125] scsi: qla2xxx: Initialized mailbox to prevent driver load failure Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 085/125] ipvs: dont ignore errors in case refcounting ip_vs module fails Greg Kroah-Hartman
` (44 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pablo Neira Ayuso, Sasha Levin
From: Pablo Neira Ayuso <pablo@netfilter.org>
[ Upstream commit daf61b026f4686250e6afa619e6d7b49edc61df7 ]
Other garbage collector might remove an entry not fully set up yet.
[570953.958293] RIP: 0010:memcmp+0x9/0x50
[...]
[570953.958567] flow_offload_hash_cmp+0x1e/0x30 [nf_flow_table]
[570953.958585] flow_offload_lookup+0x8c/0x110 [nf_flow_table]
[570953.958606] nf_flow_offload_ip_hook+0x135/0xb30 [nf_flow_table]
[570953.958624] nf_flow_offload_inet_hook+0x35/0x37 [nf_flow_table_inet]
[570953.958646] nf_hook_slow+0x3c/0xb0
[570953.958664] __netif_receive_skb_core+0x90f/0xb10
[570953.958678] ? ip_rcv_finish+0x82/0xa0
[570953.958692] __netif_receive_skb_one_core+0x3b/0x80
[570953.958711] __netif_receive_skb+0x18/0x60
[570953.958727] netif_receive_skb_internal+0x45/0xf0
[570953.958741] napi_gro_receive+0xcd/0xf0
[570953.958764] ixgbe_clean_rx_irq+0x432/0xe00 [ixgbe]
[570953.958782] ixgbe_poll+0x27b/0x700 [ixgbe]
[570953.958796] net_rx_action+0x284/0x3c0
[570953.958817] __do_softirq+0xcc/0x27c
[570953.959464] irq_exit+0xe8/0x100
[570953.960097] do_IRQ+0x59/0xe0
[570953.960734] common_interrupt+0xf/0xf
Fixes: 43c8f131184f ("netfilter: nf_flow_table: fix missing error check for rhashtable_insert_fast")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_flow_table_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c
index 8ade405129444..70bd730ca0597 100644
--- a/net/netfilter/nf_flow_table_core.c
+++ b/net/netfilter/nf_flow_table_core.c
@@ -187,6 +187,8 @@ int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow)
{
int err;
+ flow->timeout = (u32)jiffies + NF_FLOW_TIMEOUT;
+
err = rhashtable_insert_fast(&flow_table->rhashtable,
&flow->tuplehash[0].node,
nf_flow_offload_rhash_params);
@@ -203,7 +205,6 @@ int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow)
return err;
}
- flow->timeout = (u32)jiffies + NF_FLOW_TIMEOUT;
return 0;
}
EXPORT_SYMBOL_GPL(flow_offload_add);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 085/125] ipvs: dont ignore errors in case refcounting ip_vs module fails
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (83 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 084/125] netfilter: nf_flow_table: set timeout before insertion into hashes Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 086/125] ipvs: move old_secure_tcp into struct netns_ipvs Greg Kroah-Hartman
` (43 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Davide Caratti, Julian Anastasov,
Simon Horman, Sasha Levin
From: Davide Caratti <dcaratti@redhat.com>
[ Upstream commit 62931f59ce9cbabb934a431f48f2f1f441c605ac ]
if the IPVS module is removed while the sync daemon is starting, there is
a small gap where try_module_get() might fail getting the refcount inside
ip_vs_use_count_inc(). Then, the refcounts of IPVS module are unbalanced,
and the subsequent call to stop_sync_thread() causes the following splat:
WARNING: CPU: 0 PID: 4013 at kernel/module.c:1146 module_put.part.44+0x15b/0x290
Modules linked in: ip_vs(-) nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul ext4 mbcache jbd2 ghash_clmulni_intel snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev pcspkr snd_timer virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net net_failover virtio_blk failover virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ata_piix ttm crc32c_intel serio_raw drm virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nf_defrag_ipv6]
CPU: 0 PID: 4013 Comm: modprobe Tainted: G W 5.4.0-rc1.upstream+ #741
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:module_put.part.44+0x15b/0x290
Code: 04 25 28 00 00 00 0f 85 18 01 00 00 48 83 c4 68 5b 5d 41 5c 41 5d 41 5e 41 5f c3 89 44 24 28 83 e8 01 89 c5 0f 89 57 ff ff ff <0f> 0b e9 78 ff ff ff 65 8b 1d 67 83 26 4a 89 db be 08 00 00 00 48
RSP: 0018:ffff888050607c78 EFLAGS: 00010297
RAX: 0000000000000003 RBX: ffffffffc1420590 RCX: ffffffffb5db0ef9
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffc1420590
RBP: 00000000ffffffff R08: fffffbfff82840b3 R09: fffffbfff82840b3
R10: 0000000000000001 R11: fffffbfff82840b2 R12: 1ffff1100a0c0f90
R13: ffffffffc1420200 R14: ffff88804f533300 R15: ffff88804f533ca0
FS: 00007f8ea9720740(0000) GS:ffff888053800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3245abe000 CR3: 000000004c28a006 CR4: 00000000001606f0
Call Trace:
stop_sync_thread+0x3a3/0x7c0 [ip_vs]
ip_vs_sync_net_cleanup+0x13/0x50 [ip_vs]
ops_exit_list.isra.5+0x94/0x140
unregister_pernet_operations+0x29d/0x460
unregister_pernet_device+0x26/0x60
ip_vs_cleanup+0x11/0x38 [ip_vs]
__x64_sys_delete_module+0x2d5/0x400
do_syscall_64+0xa5/0x4e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f8ea8bf0db7
Code: 73 01 c3 48 8b 0d b9 80 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 80 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffcd38d2fe8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 0000000002436240 RCX: 00007f8ea8bf0db7
RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00000000024362a8
RBP: 0000000000000000 R08: 00007f8ea8eba060 R09: 00007f8ea8c658a0
R10: 00007ffcd38d2a60 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000000000001 R14: 00000000024362a8 R15: 0000000000000000
irq event stamp: 4538
hardirqs last enabled at (4537): [<ffffffffb6193dde>] quarantine_put+0x9e/0x170
hardirqs last disabled at (4538): [<ffffffffb5a0556a>] trace_hardirqs_off_thunk+0x1a/0x20
softirqs last enabled at (4522): [<ffffffffb6f8ebe9>] sk_common_release+0x169/0x2d0
softirqs last disabled at (4520): [<ffffffffb6f8eb3e>] sk_common_release+0xbe/0x2d0
Check the return value of ip_vs_use_count_inc() and let its caller return
proper error. Inside do_ip_vs_set_ctl() the module is already refcounted,
we don't need refcount/derefcount there. Finally, in register_ip_vs_app()
and start_sync_thread(), take the module refcount earlier and ensure it's
released in the error path.
Change since v1:
- better return values in case of failure of ip_vs_use_count_inc(),
thanks to Julian Anastasov
- no need to increase/decrease the module refcount in ip_vs_set_ctl(),
thanks to Julian Anastasov
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/ipvs/ip_vs_app.c | 12 ++++++++++--
net/netfilter/ipvs/ip_vs_ctl.c | 14 ++++----------
net/netfilter/ipvs/ip_vs_pe.c | 3 ++-
net/netfilter/ipvs/ip_vs_sched.c | 3 ++-
net/netfilter/ipvs/ip_vs_sync.c | 13 ++++++++++---
5 files changed, 28 insertions(+), 17 deletions(-)
diff --git a/net/netfilter/ipvs/ip_vs_app.c b/net/netfilter/ipvs/ip_vs_app.c
index 7588aeaa605ff..80759aadd3e06 100644
--- a/net/netfilter/ipvs/ip_vs_app.c
+++ b/net/netfilter/ipvs/ip_vs_app.c
@@ -198,21 +198,29 @@ struct ip_vs_app *register_ip_vs_app(struct netns_ipvs *ipvs, struct ip_vs_app *
mutex_lock(&__ip_vs_app_mutex);
+ /* increase the module use count */
+ if (!ip_vs_use_count_inc()) {
+ err = -ENOENT;
+ goto out_unlock;
+ }
+
list_for_each_entry(a, &ipvs->app_list, a_list) {
if (!strcmp(app->name, a->name)) {
err = -EEXIST;
+ /* decrease the module use count */
+ ip_vs_use_count_dec();
goto out_unlock;
}
}
a = kmemdup(app, sizeof(*app), GFP_KERNEL);
if (!a) {
err = -ENOMEM;
+ /* decrease the module use count */
+ ip_vs_use_count_dec();
goto out_unlock;
}
INIT_LIST_HEAD(&a->incs_list);
list_add(&a->a_list, &ipvs->app_list);
- /* increase the module use count */
- ip_vs_use_count_inc();
out_unlock:
mutex_unlock(&__ip_vs_app_mutex);
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 3df94a4991266..b2134c3894289 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -1204,7 +1204,8 @@ ip_vs_add_service(struct netns_ipvs *ipvs, struct ip_vs_service_user_kern *u,
struct ip_vs_service *svc = NULL;
/* increase the module use count */
- ip_vs_use_count_inc();
+ if (!ip_vs_use_count_inc())
+ return -ENOPROTOOPT;
/* Lookup the scheduler by 'u->sched_name' */
if (strcmp(u->sched_name, "none")) {
@@ -2363,9 +2364,6 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
if (copy_from_user(arg, user, len) != 0)
return -EFAULT;
- /* increase the module use count */
- ip_vs_use_count_inc();
-
/* Handle daemons since they have another lock */
if (cmd == IP_VS_SO_SET_STARTDAEMON ||
cmd == IP_VS_SO_SET_STOPDAEMON) {
@@ -2378,13 +2376,13 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
ret = -EINVAL;
if (strscpy(cfg.mcast_ifn, dm->mcast_ifn,
sizeof(cfg.mcast_ifn)) <= 0)
- goto out_dec;
+ return ret;
cfg.syncid = dm->syncid;
ret = start_sync_thread(ipvs, &cfg, dm->state);
} else {
ret = stop_sync_thread(ipvs, dm->state);
}
- goto out_dec;
+ return ret;
}
mutex_lock(&__ip_vs_mutex);
@@ -2479,10 +2477,6 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
out_unlock:
mutex_unlock(&__ip_vs_mutex);
- out_dec:
- /* decrease the module use count */
- ip_vs_use_count_dec();
-
return ret;
}
diff --git a/net/netfilter/ipvs/ip_vs_pe.c b/net/netfilter/ipvs/ip_vs_pe.c
index 0df17caa8af6c..714e7e05c1021 100644
--- a/net/netfilter/ipvs/ip_vs_pe.c
+++ b/net/netfilter/ipvs/ip_vs_pe.c
@@ -67,7 +67,8 @@ int register_ip_vs_pe(struct ip_vs_pe *pe)
struct ip_vs_pe *tmp;
/* increase the module use count */
- ip_vs_use_count_inc();
+ if (!ip_vs_use_count_inc())
+ return -ENOENT;
mutex_lock(&ip_vs_pe_mutex);
/* Make sure that the pe with this name doesn't exist
diff --git a/net/netfilter/ipvs/ip_vs_sched.c b/net/netfilter/ipvs/ip_vs_sched.c
index a2ff7d746ebf4..3bd0ff36dc41b 100644
--- a/net/netfilter/ipvs/ip_vs_sched.c
+++ b/net/netfilter/ipvs/ip_vs_sched.c
@@ -184,7 +184,8 @@ int register_ip_vs_scheduler(struct ip_vs_scheduler *scheduler)
}
/* increase the module use count */
- ip_vs_use_count_inc();
+ if (!ip_vs_use_count_inc())
+ return -ENOENT;
mutex_lock(&ip_vs_sched_mutex);
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index ecb71062fcb3c..5acd99f83166b 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -1762,6 +1762,10 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
IP_VS_DBG(7, "Each ip_vs_sync_conn entry needs %zd bytes\n",
sizeof(struct ip_vs_sync_conn_v0));
+ /* increase the module use count */
+ if (!ip_vs_use_count_inc())
+ return -ENOPROTOOPT;
+
/* Do not hold one mutex and then to block on another */
for (;;) {
rtnl_lock();
@@ -1892,9 +1896,6 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
mutex_unlock(&ipvs->sync_mutex);
rtnl_unlock();
- /* increase the module use count */
- ip_vs_use_count_inc();
-
return 0;
out:
@@ -1924,11 +1925,17 @@ out:
}
kfree(ti);
}
+
+ /* decrease the module use count */
+ ip_vs_use_count_dec();
return result;
out_early:
mutex_unlock(&ipvs->sync_mutex);
rtnl_unlock();
+
+ /* decrease the module use count */
+ ip_vs_use_count_dec();
return result;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 086/125] ipvs: move old_secure_tcp into struct netns_ipvs
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (84 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 085/125] ipvs: dont ignore errors in case refcounting ip_vs module fails Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 087/125] bonding: fix unexpected IFF_BONDING bit unset Greg Kroah-Hartman
` (42 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, syzbot, Simon Horman,
Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit c24b75e0f9239e78105f81c5f03a751641eb07ef ]
syzbot reported the following issue :
BUG: KCSAN: data-race in update_defense_level / update_defense_level
read to 0xffffffff861a6260 of 4 bytes by task 3006 on cpu 1:
update_defense_level+0x621/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:177
defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
worker_thread+0xa0/0x800 kernel/workqueue.c:2415
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
write to 0xffffffff861a6260 of 4 bytes by task 7333 on cpu 0:
update_defense_level+0xa62/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:205
defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
worker_thread+0xa0/0x800 kernel/workqueue.c:2415
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7333 Comm: kworker/0:5 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events defense_work_handler
Indeed, old_secure_tcp is currently a static variable, while it
needs to be a per netns variable.
Fixes: a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/ip_vs.h | 1 +
net/netfilter/ipvs/ip_vs_ctl.c | 15 +++++++--------
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 0e3c0d83bd991..af0ede9ad4d0b 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -885,6 +885,7 @@ struct netns_ipvs {
struct delayed_work defense_work; /* Work handler */
int drop_rate;
int drop_counter;
+ int old_secure_tcp;
atomic_t dropentry;
/* locks in ctl.c */
spinlock_t dropentry_lock; /* drop entry handling */
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index b2134c3894289..c339b5e386b78 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -98,7 +98,6 @@ static bool __ip_vs_addr_is_local_v6(struct net *net,
static void update_defense_level(struct netns_ipvs *ipvs)
{
struct sysinfo i;
- static int old_secure_tcp = 0;
int availmem;
int nomem;
int to_change = -1;
@@ -179,35 +178,35 @@ static void update_defense_level(struct netns_ipvs *ipvs)
spin_lock(&ipvs->securetcp_lock);
switch (ipvs->sysctl_secure_tcp) {
case 0:
- if (old_secure_tcp >= 2)
+ if (ipvs->old_secure_tcp >= 2)
to_change = 0;
break;
case 1:
if (nomem) {
- if (old_secure_tcp < 2)
+ if (ipvs->old_secure_tcp < 2)
to_change = 1;
ipvs->sysctl_secure_tcp = 2;
} else {
- if (old_secure_tcp >= 2)
+ if (ipvs->old_secure_tcp >= 2)
to_change = 0;
}
break;
case 2:
if (nomem) {
- if (old_secure_tcp < 2)
+ if (ipvs->old_secure_tcp < 2)
to_change = 1;
} else {
- if (old_secure_tcp >= 2)
+ if (ipvs->old_secure_tcp >= 2)
to_change = 0;
ipvs->sysctl_secure_tcp = 1;
}
break;
case 3:
- if (old_secure_tcp < 2)
+ if (ipvs->old_secure_tcp < 2)
to_change = 1;
break;
}
- old_secure_tcp = ipvs->sysctl_secure_tcp;
+ ipvs->old_secure_tcp = ipvs->sysctl_secure_tcp;
if (to_change >= 0)
ip_vs_protocol_timeout_change(ipvs,
ipvs->sysctl_secure_tcp > 1);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 087/125] bonding: fix unexpected IFF_BONDING bit unset
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (85 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 086/125] ipvs: move old_secure_tcp into struct netns_ipvs Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 088/125] macsec: fix refcnt leak in module exit routine Greg Kroah-Hartman
` (41 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Taehee Yoo, David S. Miller, Sasha Levin
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 65de65d9033750d2cf1b336c9d6e9da3a8b5cc6e ]
The IFF_BONDING means bonding master or bonding slave device.
->ndo_add_slave() sets IFF_BONDING flag and ->ndo_del_slave() unsets
IFF_BONDING flag.
bond0<--bond1
Both bond0 and bond1 are bonding device and these should keep having
IFF_BONDING flag until they are removed.
But bond1 would lose IFF_BONDING at ->ndo_del_slave() because that routine
do not check whether the slave device is the bonding type or not.
This patch adds the interface type check routine before removing
IFF_BONDING flag.
Test commands:
ip link add bond0 type bond
ip link add bond1 type bond
ip link set bond1 master bond0
ip link set bond1 nomaster
ip link del bond1 type bond
ip link add bond1 type bond
Splat looks like:
[ 226.665555] proc_dir_entry 'bonding/bond1' already registered
[ 226.666440] WARNING: CPU: 0 PID: 737 at fs/proc/generic.c:361 proc_register+0x2a9/0x3e0
[ 226.667571] Modules linked in: bonding af_packet sch_fq_codel ip_tables x_tables unix
[ 226.668662] CPU: 0 PID: 737 Comm: ip Not tainted 5.4.0-rc3+ #96
[ 226.669508] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 226.670652] RIP: 0010:proc_register+0x2a9/0x3e0
[ 226.671612] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 39 01 00 00 48 8b 04 24 48 89 ea 48 c7 c7 a0 0b 14 9f 48 8b b0 e
0 00 00 00 e8 07 e7 88 ff <0f> 0b 48 c7 c7 40 2d a5 9f e8 59 d6 23 01 48 8b 4c 24 10 48 b8 00
[ 226.675007] RSP: 0018:ffff888050e17078 EFLAGS: 00010282
[ 226.675761] RAX: dffffc0000000008 RBX: ffff88805fdd0f10 RCX: ffffffff9dd344e2
[ 226.676757] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f6b8c
[ 226.677751] RBP: ffff8880507160f3 R08: ffffed100d940019 R09: ffffed100d940019
[ 226.678761] R10: 0000000000000001 R11: ffffed100d940018 R12: ffff888050716008
[ 226.679757] R13: ffff8880507160f2 R14: dffffc0000000000 R15: ffffed100a0e2c1e
[ 226.680758] FS: 00007fdc217cc0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[ 226.681886] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 226.682719] CR2: 00007f49313424d0 CR3: 0000000050e46001 CR4: 00000000000606f0
[ 226.683727] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 226.684725] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 226.685681] Call Trace:
[ 226.687089] proc_create_seq_private+0xb3/0xf0
[ 226.687778] bond_create_proc_entry+0x1b3/0x3f0 [bonding]
[ 226.691458] bond_netdev_event+0x433/0x970 [bonding]
[ 226.692139] ? __module_text_address+0x13/0x140
[ 226.692779] notifier_call_chain+0x90/0x160
[ 226.693401] register_netdevice+0x9b3/0xd80
[ 226.694010] ? alloc_netdev_mqs+0x854/0xc10
[ 226.694629] ? netdev_change_features+0xa0/0xa0
[ 226.695278] ? rtnl_create_link+0x2ed/0xad0
[ 226.695849] bond_newlink+0x2a/0x60 [bonding]
[ 226.696422] __rtnl_newlink+0xb9f/0x11b0
[ 226.696968] ? rtnl_link_unregister+0x220/0x220
[ ... ]
Fixes: 0b680e753724 ("[PATCH] bonding: Add priv_flag to avoid event mishandling")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/bonding/bond_main.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 136a972ea903a..9b8143dca5123 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1798,7 +1798,8 @@ err_detach:
slave_disable_netpoll(new_slave);
err_close:
- slave_dev->priv_flags &= ~IFF_BONDING;
+ if (!netif_is_bond_master(slave_dev))
+ slave_dev->priv_flags &= ~IFF_BONDING;
dev_close(slave_dev);
err_restore_mac:
@@ -2004,7 +2005,8 @@ static int __bond_release_one(struct net_device *bond_dev,
else
dev_set_mtu(slave_dev, slave->original_mtu);
- slave_dev->priv_flags &= ~IFF_BONDING;
+ if (!netif_is_bond_master(slave_dev))
+ slave_dev->priv_flags &= ~IFF_BONDING;
bond_free_slave(slave);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 088/125] macsec: fix refcnt leak in module exit routine
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (86 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 087/125] bonding: fix unexpected IFF_BONDING bit unset Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 089/125] usb: fsl: Check memory resource before releasing it Greg Kroah-Hartman
` (40 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Taehee Yoo, David S. Miller, Sasha Levin
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 2bce1ebed17da54c65042ec2b962e3234bad5b47 ]
When a macsec interface is created, it increases a refcnt to a lower
device(real device). when macsec interface is deleted, the refcnt is
decreased in macsec_free_netdev(), which is ->priv_destructor() of
macsec interface.
The problem scenario is this.
When nested macsec interfaces are exiting, the exit routine of the
macsec module makes refcnt leaks.
Test commands:
ip link add dummy0 type dummy
ip link add macsec0 link dummy0 type macsec
ip link add macsec1 link macsec0 type macsec
modprobe -rv macsec
[ 208.629433] unregister_netdevice: waiting for macsec0 to become free. Usage count = 1
Steps of exit routine of macsec module are below.
1. Calls ->dellink() in __rtnl_link_unregister().
2. Checks refcnt and wait refcnt to be 0 if refcnt is not 0 in
netdev_run_todo().
3. Calls ->priv_destruvtor() in netdev_run_todo().
Step2 checks refcnt, but step3 decreases refcnt.
So, step2 waits forever.
This patch makes the macsec module do not hold a refcnt of the lower
device because it already holds a refcnt of the lower device with
netdev_upper_dev_link().
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/macsec.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 0dc92d2faa64d..05115fb0c97a9 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3008,12 +3008,10 @@ static const struct nla_policy macsec_rtnl_policy[IFLA_MACSEC_MAX + 1] = {
static void macsec_free_netdev(struct net_device *dev)
{
struct macsec_dev *macsec = macsec_priv(dev);
- struct net_device *real_dev = macsec->real_dev;
free_percpu(macsec->stats);
free_percpu(macsec->secy.tx_sc.stats);
- dev_put(real_dev);
}
static void macsec_setup(struct net_device *dev)
@@ -3268,8 +3266,6 @@ static int macsec_newlink(struct net *net, struct net_device *dev,
if (err < 0)
return err;
- dev_hold(real_dev);
-
macsec->nest_level = dev_get_nest_level(real_dev) + 1;
netdev_lockdep_set_classes(dev);
lockdep_set_class_and_subclass(&dev->addr_list_lock,
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 089/125] usb: fsl: Check memory resource before releasing it
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (87 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 088/125] macsec: fix refcnt leak in module exit routine Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 090/125] usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode Greg Kroah-Hartman
` (39 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nikhil Badola, Ran Wang, Peter Chen,
Felipe Balbi, Sasha Levin
From: Nikhil Badola <nikhil.badola@freescale.com>
[ Upstream commit bc1e3a2dd0c9954fd956ac43ca2876bbea018c01 ]
Check memory resource existence before releasing it to avoid NULL
pointer dereference
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/fsl_udc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index be59309e848c3..d44b26d5b2a2c 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -2552,7 +2552,7 @@ static int fsl_udc_remove(struct platform_device *pdev)
dma_pool_destroy(udc_controller->td_pool);
free_irq(udc_controller->irq, udc_controller);
iounmap(dr_regs);
- if (pdata->operating_mode == FSL_USB2_DR_DEVICE)
+ if (res && (pdata->operating_mode == FSL_USB2_DR_DEVICE))
release_mem_region(res->start, resource_size(res));
/* free udc --wait for the release() finished */
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 090/125] usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode.
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (88 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 089/125] usb: fsl: Check memory resource before releasing it Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 091/125] usb: gadget: composite: Fix possible double free memory bug Greg Kroah-Hartman
` (38 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Cristian Birsan, Felipe Balbi, Sasha Levin
From: Cristian Birsan <cristian.birsan@microchip.com>
[ Upstream commit ba3a1a915c49cc3023e4ddfc88f21e7514e82aa4 ]
Fix interrupt storm generated by endpoints when working in FIFO mode.
The TX_COMPLETE interrupt is used only by control endpoints processing.
Do not enable it for other types of endpoints.
Fixes: 914a3f3b3754 ("USB: add atmel_usba_udc driver")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 8f267be1745d8..a4ab230335786 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -436,9 +436,11 @@ static void submit_request(struct usba_ep *ep, struct usba_request *req)
next_fifo_transaction(ep, req);
if (req->last_transaction) {
usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
- usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+ if (ep_is_control(ep))
+ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
} else {
- usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+ if (ep_is_control(ep))
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
}
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 091/125] usb: gadget: composite: Fix possible double free memory bug
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (89 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 090/125] usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 092/125] usb: dwc3: pci: prevent memory leak in dwc3_pci_probe Greg Kroah-Hartman
` (37 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chandana Kishori Chiluveru,
Felipe Balbi, Sasha Levin
From: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
[ Upstream commit 1c20c89b0421b52b2417bb0f62a611bc669eda1d ]
composite_dev_cleanup call from the failure of configfs_composite_bind
frees up the cdev->os_desc_req and cdev->req. If the previous calls of
bind and unbind is successful these will carry stale values.
Consider the below sequence of function calls:
configfs_composite_bind()
composite_dev_prepare()
- Allocate cdev->req, cdev->req->buf
composite_os_desc_req_prepare()
- Allocate cdev->os_desc_req, cdev->os_desc_req->buf
configfs_composite_unbind()
composite_dev_cleanup()
- free the cdev->os_desc_req->buf and cdev->req->buf
Next composition switch
configfs_composite_bind()
- If it fails goto err_comp_cleanup will call the
composite_dev_cleanup() function
composite_dev_cleanup()
- calls kfree up with the stale values of cdev->req->buf and
cdev->os_desc_req from the previous configfs_composite_bind
call. The free call on these stale values leads to double free.
Hence, Fix this issue by setting request and buffer pointer to NULL after
kfree.
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/composite.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index dfcabadeed01b..33115e19756c6 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -2156,14 +2156,18 @@ void composite_dev_cleanup(struct usb_composite_dev *cdev)
usb_ep_dequeue(cdev->gadget->ep0, cdev->os_desc_req);
kfree(cdev->os_desc_req->buf);
+ cdev->os_desc_req->buf = NULL;
usb_ep_free_request(cdev->gadget->ep0, cdev->os_desc_req);
+ cdev->os_desc_req = NULL;
}
if (cdev->req) {
if (cdev->setup_pending)
usb_ep_dequeue(cdev->gadget->ep0, cdev->req);
kfree(cdev->req->buf);
+ cdev->req->buf = NULL;
usb_ep_free_request(cdev->gadget->ep0, cdev->req);
+ cdev->req = NULL;
}
cdev->next_string_id = 0;
device_remove_file(&cdev->gadget->dev, &dev_attr_suspended);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 092/125] usb: dwc3: pci: prevent memory leak in dwc3_pci_probe
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (90 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 091/125] usb: gadget: composite: Fix possible double free memory bug Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 093/125] usb: gadget: configfs: fix concurrent issue between composite APIs Greg Kroah-Hartman
` (36 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Navid Emamdoost, Felipe Balbi, Sasha Levin
From: Navid Emamdoost <navid.emamdoost@gmail.com>
[ Upstream commit 9bbfceea12a8f145097a27d7c7267af25893c060 ]
In dwc3_pci_probe a call to platform_device_alloc allocates a device
which is correctly put in case of error except one case: when the call to
platform_device_add_properties fails it directly returns instead of
going to error handling. This commit replaces return with the goto.
Fixes: 1a7b12f69a94 ("usb: dwc3: pci: Supply device properties via driver data")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/dwc3/dwc3-pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 8cced3609e243..b4e42d597211a 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -256,7 +256,7 @@ static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
ret = platform_device_add_properties(dwc->dwc3, p);
if (ret < 0)
- return ret;
+ goto err;
ret = dwc3_pci_quirks(dwc);
if (ret)
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 093/125] usb: gadget: configfs: fix concurrent issue between composite APIs
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (91 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 092/125] usb: dwc3: pci: prevent memory leak in dwc3_pci_probe Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-13 13:49 ` Pavel Machek
2019-11-11 18:28 ` [PATCH 4.19 094/125] usb: dwc3: remove the call trace of USBx_GFLADJ Greg Kroah-Hartman
` (35 subsequent siblings)
128 siblings, 1 reply; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Chen, Felipe Balbi, Sasha Levin
From: Peter Chen <peter.chen@nxp.com>
[ Upstream commit 1a1c851bbd706ea9f3a9756c2d3db28523506d3b ]
We meet several NULL pointer issues if configfs_composite_unbind
and composite_setup (or composite_disconnect) are running together.
These issues occur when do the function switch stress test, the
configfs_compsoite_unbind is called from user mode by
echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt
or disconnect interrupt occurs by hardware. The composite_setup
will get the cdev from get_gadget_data, but configfs_composite_unbind
will set gadget data as NULL, so the NULL pointer issue occurs.
This concurrent is hard to reproduce by native kernel, but can be
reproduced by android kernel.
In this commit, we introduce one spinlock belongs to structure
gadget_info since we can't use the same spinlock in usb_composite_dev
due to exclusive running together between composite_setup and
configfs_composite_unbind. And one bit flag 'unbind' to indicate the
code is at unbind routine, this bit is needed due to we release the
lock at during configfs_composite_unbind sometimes, and composite_setup
may be run at that time.
Several oops:
oops 1:
android_work: sent uevent USB_STATE=CONNECTED
configfs-gadget gadget: super-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
init: Received control message 'start' for 'adbd' from pid: 3515 (system_server)
Unable to handle kernel NULL pointer dereference at virtual address 0000002a
init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/android.hardware.usb@1.1-servic)
Mem abort info:
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000
[000000000000002a] *pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2a98000 task.stack: ffff00000b7b8000
PC is at composite_setup+0x44/0x1508
LR is at android_setup+0xb8/0x13c
pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5
sp : ffff00000b7bbb80
x29: ffff00000b7bbb80 x28: ffff8008f2a3c010
x27: 0000000000000001 x26: 0000000000000000 [1232/1897]
audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64
x25: 00000000ffffffa1 x24: ffff8008f2a3c010
audit: rate limit exceeded
x23: 0000000000000409 x22: ffff000009c8e000
x21: ffff8008f7a8b428 x20: ffff00000afae000
x19: ffff0000089ff000 x18: 0000000000000000
x17: 0000000000000000 x16: ffff0000082b7c9c
x15: 0000000000000000 x14: f1866f5b952aca46
x13: e35502e30d44349c x12: 0000000000000008
x11: 0000000000000008 x10: 0000000000000a30
x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90
x7 : ffff8008f27a9c90 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000001
x3 : 0000000000000000 x2 : 0000000000000006
x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00
X7: 0xffff8008f27a9c10:
9c10 00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040
9c30 00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000
9c50 00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078
9c70 00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000
9c90 00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008
9cb0 f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001
9cd0 870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000
using random self ethernet address
9cf0 019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000
using random host ethernet address
00000000
X8: 0xffff8008f2a98a10:
8a10 00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000
8a30 eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000
8a50 f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000
8a70 fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000
8a90 080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000
8ab0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8ad0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8af0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
X21: 0xffff8008f7a8b3a8:
b3a8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3c8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3e8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b408 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
b428 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b448 0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003
b468 e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008
b488 f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000
X24: 0xffff8008f2a3bf90:
bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008
X28: 0xffff8008f2a3bf90:
bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008
Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000)
Call trace:
Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80)
ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000
ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90
ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008
baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000
bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000
bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409
bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001
bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80
bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00
bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c
[<ffff0000089ffb3c>] composite_setup+0x44/0x1508
[<ffff000008a032fc>] android_setup+0xb8/0x13c
[<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70
[<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654
[<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc
[<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68
[<ffff000008145bf0>] irq_thread_fn+0x28/0x88
[<ffff000008145e38>] irq_thread+0x13c/0x228
[<ffff0000080fed70>] kthread+0x104/0x130
[<ffff000008085064>] ret_from_fork+0x10/0x18
oops2:
composite_disconnect: Calling disconnect on a Gadget that is not connected
android_work: did not send uevent (0 0 (null))
init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx)
init: Sending signal 9 to service 'adbd' (pid 22343) process group...
------------[ cut here ]------------
audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64
audit: rate limit exceeded
WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88
Modules linked in:
CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2349c00 task.stack: ffff00000b0a8000
PC is at composite_disconnect+0x80/0x88
LR is at composite_disconnect+0x80/0x88
pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5
sp : ffff000008003dd0
x29: ffff000008003dd0 x28: ffff8008f2349c00
x27: ffff000009885018 x26: ffff000008004000
Timeout for IPC response!
x25: ffff000009885018 x24: ffff000009c8e280
x23: ffff8008f2d98010 x22: 00000000000001c0
x21: ffff8008f2d98394 x20: ffff8008f2d98010
x19: 0000000000000000 x18: 0000e3956f4f075a
fxos8700 4-001e: i2c block read acc failed
x17: 0000e395735727e8 x16: ffff00000829f4d4
x15: ffffffffffffffff x14: 7463656e6e6f6320
x13: 746f6e2009090920 x12: 7369207461687420
x11: 7465676461472061 x10: 206e6f207463656e
x9 : 6e6f637369642067 x8 : ffff000009c8e280
x7 : ffff0000086ca6cc x6 : ffff000009f15e78
x5 : 0000000000000000 x4 : 0000000000000000
x3 : ffffffffffffffff x2 : c3f28b86000c3900
x1 : c3f28b86000c3900 x0 : 000000000000004e
X20: 0xffff8008f2d97f90:
7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain
7fd0
Timeout for IPC response!
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
using random self ethernet address
7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc
using random host ethernet address
ffff0000
8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008
X21: 0xffff8008f2d98314:
8314 ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8334 00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000
8354 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8374 00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000
8394 e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400
Timeout for IPC response!
83b4 ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018
83d4 ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918
83f4 ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000
X23: 0xffff8008f2d97f90:
7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000
8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008
X28: 0xffff8008f2349b80:
9b80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9ba0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9bc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9be0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9c00 00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000
9c20 0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000
9c40 00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008
9c60 00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000
Call trace:
Exception stack(0xffff000008003c90 to 0xffff000008003dd0)
3c80: 000000000000004e c3f28b86000c3900
3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000
3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067
3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920
3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8
3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394
3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018
3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0
3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5
3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000
init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx)
3dc0: ffff000008003dd0 ffff0000089ff9b0
[<ffff0000089ff9b0>] composite_disconnect+0x80/0x88
[<ffff000008a044d4>] android_disconnect+0x3c/0x68
[<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8
[<ffff0000089b84c0>] cdns3_irq+0x44/0x94
[<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c
[<ffff000008144c0c>] handle_irq_event+0x58/0xc0
[<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180
[<ffff000008143a10>] generic_handle_irq+0x24/0x38
[<ffff000008144170>] __handle_domain_irq+0x60/0xac
[<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/configfs.c | 110 ++++++++++++++++++++++++++++++++--
1 file changed, 105 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 0251299428946..33852c2b29d1a 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -61,6 +61,8 @@ struct gadget_info {
bool use_os_desc;
char b_vendor_code;
char qw_sign[OS_STRING_QW_SIGN_LEN];
+ spinlock_t spinlock;
+ bool unbind;
};
static inline struct gadget_info *to_gadget_info(struct config_item *item)
@@ -1244,6 +1246,7 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
int ret;
/* the gi->lock is hold by the caller */
+ gi->unbind = 0;
cdev->gadget = gadget;
set_gadget_data(gadget, cdev);
ret = composite_dev_prepare(composite, cdev);
@@ -1376,31 +1379,128 @@ static void configfs_composite_unbind(struct usb_gadget *gadget)
{
struct usb_composite_dev *cdev;
struct gadget_info *gi;
+ unsigned long flags;
/* the gi->lock is hold by the caller */
cdev = get_gadget_data(gadget);
gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ gi->unbind = 1;
+ spin_unlock_irqrestore(&gi->spinlock, flags);
kfree(otg_desc[0]);
otg_desc[0] = NULL;
purge_configs_funcs(gi);
composite_dev_cleanup(cdev);
usb_ep_autoconfig_reset(cdev->gadget);
+ spin_lock_irqsave(&gi->spinlock, flags);
cdev->gadget = NULL;
set_gadget_data(gadget, NULL);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static int configfs_composite_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+ int ret;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return 0;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return 0;
+ }
+
+ ret = composite_setup(gadget, ctrl);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return ret;
+}
+
+static void configfs_composite_disconnect(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return;
+ }
+
+ composite_disconnect(gadget);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_suspend(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return;
+ }
+
+ composite_suspend(gadget);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_resume(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return;
+ }
+
+ composite_resume(gadget);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
}
static const struct usb_gadget_driver configfs_driver_template = {
.bind = configfs_composite_bind,
.unbind = configfs_composite_unbind,
- .setup = composite_setup,
- .reset = composite_disconnect,
- .disconnect = composite_disconnect,
+ .setup = configfs_composite_setup,
+ .reset = configfs_composite_disconnect,
+ .disconnect = configfs_composite_disconnect,
- .suspend = composite_suspend,
- .resume = composite_resume,
+ .suspend = configfs_composite_suspend,
+ .resume = configfs_composite_resume,
.max_speed = USB_SPEED_SUPER,
.driver = {
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 093/125] usb: gadget: configfs: fix concurrent issue between composite APIs
2019-11-11 18:28 ` [PATCH 4.19 093/125] usb: gadget: configfs: fix concurrent issue between composite APIs Greg Kroah-Hartman
@ 2019-11-13 13:49 ` Pavel Machek
2019-11-14 6:44 ` Peter Chen
0 siblings, 1 reply; 145+ messages in thread
From: Pavel Machek @ 2019-11-13 13:49 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Peter Chen, Felipe Balbi, Sasha Levin
[-- Attachment #1: Type: text/plain, Size: 2145 bytes --]
On Mon 2019-11-11 19:28:52, Greg Kroah-Hartman wrote:
> From: Peter Chen <peter.chen@nxp.com>
>
> [ Upstream commit 1a1c851bbd706ea9f3a9756c2d3db28523506d3b ]
>
> We meet several NULL pointer issues if configfs_composite_unbind
> and composite_setup (or composite_disconnect) are running together.
> These issues occur when do the function switch stress test, the
> configfs_compsoite_unbind is called from user mode by
> echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt
> or disconnect interrupt occurs by hardware. The composite_setup
> +++ b/drivers/usb/gadget/configfs.c
> @@ -61,6 +61,8 @@ struct gadget_info {
> bool use_os_desc;
> char b_vendor_code;
> char qw_sign[OS_STRING_QW_SIGN_LEN];
> + spinlock_t spinlock;
> + bool unbind;
> };
>
> static inline struct gadget_info *to_gadget_info(struct config_item *item)
> @@ -1244,6 +1246,7 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
> int ret;
>
> /* the gi->lock is hold by the caller */
> + gi->unbind = 0;
> cdev->gadget = gadget;
Since variable is bool, I'd expect "= false" here?
> + unsigned long flags;
>
> /* the gi->lock is hold by the caller */
"is held".
> cdev = get_gadget_data(gadget);
> gi = container_of(cdev, struct gadget_info, cdev);
> + spin_lock_irqsave(&gi->spinlock, flags);
> + gi->unbind = 1;
= true;
> +static int configfs_composite_setup(struct usb_gadget *gadget,
> + const struct usb_ctrlrequest *ctrl)
> +{
> + struct usb_composite_dev *cdev;
> + struct gadget_info *gi;
> + unsigned long flags;
> + int ret;
> +
> + cdev = get_gadget_data(gadget);
> + if (!cdev)
> + return 0;
> +
> + gi = container_of(cdev, struct gadget_info, cdev);
> + spin_lock_irqsave(&gi->spinlock, flags);
> + cdev = get_gadget_data(gadget);
cdev already contains required value, why get it second time? (If it
needs to be done under lock, comment might be useful...)
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 145+ messages in thread* RE: [PATCH 4.19 093/125] usb: gadget: configfs: fix concurrent issue between composite APIs
2019-11-13 13:49 ` Pavel Machek
@ 2019-11-14 6:44 ` Peter Chen
0 siblings, 0 replies; 145+ messages in thread
From: Peter Chen @ 2019-11-14 6:44 UTC (permalink / raw)
To: Pavel Machek, Greg Kroah-Hartman
Cc: linux-kernel, stable, Felipe Balbi, Sasha Levin
> >
> > We meet several NULL pointer issues if configfs_composite_unbind and
> > composite_setup (or composite_disconnect) are running together.
> > These issues occur when do the function switch stress test, the
> > configfs_compsoite_unbind is called from user mode by echo "" to
> > /sys/../UDC entry, and meanwhile, the setup interrupt or disconnect
> > interrupt occurs by hardware. The composite_setup
>
> > +++ b/drivers/usb/gadget/configfs.c
> > @@ -61,6 +61,8 @@ struct gadget_info {
> > bool use_os_desc;
> > char b_vendor_code;
> > char qw_sign[OS_STRING_QW_SIGN_LEN];
> > + spinlock_t spinlock;
> > + bool unbind;
> > };
> >
> > static inline struct gadget_info *to_gadget_info(struct config_item
> > *item) @@ -1244,6 +1246,7 @@ static int configfs_composite_bind(struct
> usb_gadget *gadget,
> > int ret;
> >
> > /* the gi->lock is hold by the caller */
> > + gi->unbind = 0;
> > cdev->gadget = gadget;
>
> Since variable is bool, I'd expect "= false" here?
>
> > + unsigned long flags;
> >
> > /* the gi->lock is hold by the caller */
>
> "is held".
>
> > cdev = get_gadget_data(gadget);
> > gi = container_of(cdev, struct gadget_info, cdev);
> > + spin_lock_irqsave(&gi->spinlock, flags);
> > + gi->unbind = 1;
>
> = true;
>
> > +static int configfs_composite_setup(struct usb_gadget *gadget,
> > + const struct usb_ctrlrequest *ctrl) {
> > + struct usb_composite_dev *cdev;
> > + struct gadget_info *gi;
> > + unsigned long flags;
> > + int ret;
> > +
> > + cdev = get_gadget_data(gadget);
> > + if (!cdev)
> > + return 0;
> > +
> > + gi = container_of(cdev, struct gadget_info, cdev);
> > + spin_lock_irqsave(&gi->spinlock, flags);
> > + cdev = get_gadget_data(gadget);
>
> cdev already contains required value, why get it second time? (If it needs to be
> done under lock, comment might be useful...)
>
Hi Pavel,
Thanks for comment.
The reason is the cdev may be set to NULL by configfs_composite_unbind through
another process, eg, the user wants to disable current USB gadget function,
this patch tries to fix such kinds of concurrent issue.
Peter
^ permalink raw reply [flat|nested] 145+ messages in thread
* [PATCH 4.19 094/125] usb: dwc3: remove the call trace of USBx_GFLADJ
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (92 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 093/125] usb: gadget: configfs: fix concurrent issue between composite APIs Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 095/125] perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity Greg Kroah-Hartman
` (34 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yinbo Zhu, Felipe Balbi, Sasha Levin
From: Yinbo Zhu <yinbo.zhu@nxp.com>
[ Upstream commit a7d9874c6f3fbc8d25cd9ceba35b6822612c4ebf ]
layerscape board sometimes reported some usb call trace, that is due to
kernel sent LPM tokerns automatically when it has no pending transfers
and think that the link is idle enough to enter L1, which procedure will
ask usb register has a recovery,then kernel will compare USBx_GFLADJ and
set GFLADJ_30MHZ, GFLADJ_30MHZ_REG until GFLADJ_30MHZ is equal 0x20, if
the conditions were met then issue occur, but whatever the conditions
whether were met that usb is all need keep GFLADJ_30MHZ of value is 0x20
(xhci spec ask use GFLADJ_30MHZ to adjust any offset from clock source
that generates the clock that drives the SOF counter, 0x20 is default
value of it)That is normal logic, so need remove the call trace.
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/dwc3/core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 05b9ccff7447a..aca7e7fa5e47d 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -299,8 +299,7 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
dft = reg & DWC3_GFLADJ_30MHZ_MASK;
- if (!dev_WARN_ONCE(dwc->dev, dft == dwc->fladj,
- "request value same as default, ignoring\n")) {
+ if (dft != dwc->fladj) {
reg &= ~DWC3_GFLADJ_30MHZ_MASK;
reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;
dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 095/125] perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (93 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 094/125] usb: dwc3: remove the call trace of USBx_GFLADJ Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 096/125] perf/x86/amd/ibs: Handle erratum #420 only on the affected CPU family (10h) Greg Kroah-Hartman
` (33 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kim Phillips, Peter Zijlstra (Intel),
Alexander Shishkin, Arnaldo Carvalho de Melo,
Arnaldo Carvalho de Melo, Borislav Petkov, H. Peter Anvin,
Jiri Olsa, Linus Torvalds, Mark Rutland, Namhyung Kim,
Stephane Eranian, Thomas Gleixner, Vince Weaver, Ingo Molnar,
Sasha Levin
From: Kim Phillips <kim.phillips@amd.com>
[ Upstream commit 317b96bb14303c7998dbcd5bc606bd8038fdd4b4 ]
The loop that reads all the IBS MSRs into *buf stopped one MSR short of
reading the IbsOpData register, which contains the RipInvalid status bit.
Fix the offset_max assignment so the MSR gets read, so the RIP invalid
evaluation is based on what the IBS h/w output, instead of what was
left in memory.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: d47e8238cd76 ("perf/x86-ibs: Take instruction pointer from ibs sample")
Link: https://lkml.kernel.org/r/20191023150955.30292-1-kim.phillips@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/amd/ibs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 80c6d84cad67b..fac0867907d4d 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -625,7 +625,7 @@ fail:
if (event->attr.sample_type & PERF_SAMPLE_RAW)
offset_max = perf_ibs->offset_max;
else if (check_rip)
- offset_max = 2;
+ offset_max = 3;
else
offset_max = 1;
do {
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 096/125] perf/x86/amd/ibs: Handle erratum #420 only on the affected CPU family (10h)
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (94 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 095/125] perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 097/125] perf/x86/uncore: Fix event group support Greg Kroah-Hartman
` (32 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kim Phillips, Peter Zijlstra (Intel),
Alexander Shishkin, Arnaldo Carvalho de Melo,
Arnaldo Carvalho de Melo, Borislav Petkov, H. Peter Anvin,
Jiri Olsa, Linus Torvalds, Mark Rutland, Namhyung Kim,
Stephane Eranian, Thomas Gleixner, Vince Weaver, Ingo Molnar,
Sasha Levin
From: Kim Phillips <kim.phillips@amd.com>
[ Upstream commit e431e79b60603079d269e0c2a5177943b95fa4b6 ]
This saves us writing the IBS control MSR twice when disabling the
event.
I searched revision guides for all families since 10h, and did not
find occurrence of erratum #420, nor anything remotely similar:
so we isolate the secondary MSR write to family 10h only.
Also unconditionally update the count mask for IBS Op implementations
that have read & writeable current count (CurCnt) fields in addition
to the MaxCnt field. These bits were reserved on prior
implementations, and therefore shouldn't have negative impact.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: c9574fe0bdb9 ("perf/x86-ibs: Implement workaround for IBS erratum #420")
Link: https://lkml.kernel.org/r/20191023150955.30292-2-kim.phillips@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/amd/ibs.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index fac0867907d4d..07bf5517d9d8b 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -389,7 +389,8 @@ static inline void perf_ibs_disable_event(struct perf_ibs *perf_ibs,
struct hw_perf_event *hwc, u64 config)
{
config &= ~perf_ibs->cnt_mask;
- wrmsrl(hwc->config_base, config);
+ if (boot_cpu_data.x86 == 0x10)
+ wrmsrl(hwc->config_base, config);
config &= ~perf_ibs->enable_mask;
wrmsrl(hwc->config_base, config);
}
@@ -564,7 +565,8 @@ static struct perf_ibs perf_ibs_op = {
},
.msr = MSR_AMD64_IBSOPCTL,
.config_mask = IBS_OP_CONFIG_MASK,
- .cnt_mask = IBS_OP_MAX_CNT,
+ .cnt_mask = IBS_OP_MAX_CNT | IBS_OP_CUR_CNT |
+ IBS_OP_CUR_CNT_RAND,
.enable_mask = IBS_OP_ENABLE,
.valid_mask = IBS_OP_VAL,
.max_period = IBS_OP_MAX_CNT << 4,
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 097/125] perf/x86/uncore: Fix event group support
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (95 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 096/125] perf/x86/amd/ibs: Handle erratum #420 only on the affected CPU family (10h) Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-13 10:35 ` Pavel Machek
2019-11-11 18:28 ` [PATCH 4.19 098/125] USB: Skip endpoints with 0 maxpacket length Greg Kroah-Hartman
` (31 subsequent siblings)
128 siblings, 1 reply; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kan Liang, Peter Zijlstra (Intel),
Alexander Shishkin, Arnaldo Carvalho de Melo, Jiri Olsa,
Linus Torvalds, Mark Rutland, Namhyung Kim, Stephane Eranian,
Thomas Gleixner, Vince Weaver, linux-drivers-review, linux-perf,
Ingo Molnar, Sasha Levin
From: Kan Liang <kan.liang@linux.intel.com>
[ Upstream commit 75be6f703a141b048590d659a3954c4fedd30bba ]
The events in the same group don't start or stop simultaneously.
Here is the ftrace when enabling event group for uncore_iio_0:
# perf stat -e "{uncore_iio_0/event=0x1/,uncore_iio_0/event=0xe/}"
<idle>-0 [000] d.h. 8959.064832: read_msr: a41, value
b2b0b030 //Read counter reg of IIO unit0 counter0
<idle>-0 [000] d.h. 8959.064835: write_msr: a48, value
400001 //Write Ctrl reg of IIO unit0 counter0 to enable
counter0. <------ Although counter0 is enabled, Unit Ctrl is still
freezed. Nothing will count. We are still good here.
<idle>-0 [000] d.h. 8959.064836: read_msr: a40, value
30100 //Read Unit Ctrl reg of IIO unit0
<idle>-0 [000] d.h. 8959.064838: write_msr: a40, value
30000 //Write Unit Ctrl reg of IIO unit0 to enable all
counters in the unit by clear Freeze bit <------Unit0 is un-freezed.
Counter0 has been enabled. Now it starts counting. But counter1 has not
been enabled yet. The issue starts here.
<idle>-0 [000] d.h. 8959.064846: read_msr: a42, value 0
//Read counter reg of IIO unit0 counter1
<idle>-0 [000] d.h. 8959.064847: write_msr: a49, value
40000e //Write Ctrl reg of IIO unit0 counter1 to enable
counter1. <------ Now, counter1 just starts to count. Counter0 has
been running for a while.
Current code un-freezes the Unit Ctrl right after the first counter is
enabled. The subsequent group events always loses some counter values.
Implement pmu_enable and pmu_disable support for uncore, which can help
to batch hardware accesses.
No one uses uncore_enable_box and uncore_disable_box. Remove them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-drivers-review@eclists.intel.com
Cc: linux-perf@eclists.intel.com
Fixes: 087bfbb03269 ("perf/x86: Add generic Intel uncore PMU support")
Link: https://lkml.kernel.org/r/1572014593-31591-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/intel/uncore.c | 44 +++++++++++++++++++++++++++++-----
arch/x86/events/intel/uncore.h | 12 ----------
2 files changed, 38 insertions(+), 18 deletions(-)
diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index 2690135bf83f0..7098b9b05d566 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -485,10 +485,8 @@ void uncore_pmu_event_start(struct perf_event *event, int flags)
local64_set(&event->hw.prev_count, uncore_read_counter(box, event));
uncore_enable_event(box, event);
- if (box->n_active == 1) {
- uncore_enable_box(box);
+ if (box->n_active == 1)
uncore_pmu_start_hrtimer(box);
- }
}
void uncore_pmu_event_stop(struct perf_event *event, int flags)
@@ -512,10 +510,8 @@ void uncore_pmu_event_stop(struct perf_event *event, int flags)
WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
hwc->state |= PERF_HES_STOPPED;
- if (box->n_active == 0) {
- uncore_disable_box(box);
+ if (box->n_active == 0)
uncore_pmu_cancel_hrtimer(box);
- }
}
if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
@@ -769,6 +765,40 @@ static int uncore_pmu_event_init(struct perf_event *event)
return ret;
}
+static void uncore_pmu_enable(struct pmu *pmu)
+{
+ struct intel_uncore_pmu *uncore_pmu;
+ struct intel_uncore_box *box;
+
+ uncore_pmu = container_of(pmu, struct intel_uncore_pmu, pmu);
+ if (!uncore_pmu)
+ return;
+
+ box = uncore_pmu_to_box(uncore_pmu, smp_processor_id());
+ if (!box)
+ return;
+
+ if (uncore_pmu->type->ops->enable_box)
+ uncore_pmu->type->ops->enable_box(box);
+}
+
+static void uncore_pmu_disable(struct pmu *pmu)
+{
+ struct intel_uncore_pmu *uncore_pmu;
+ struct intel_uncore_box *box;
+
+ uncore_pmu = container_of(pmu, struct intel_uncore_pmu, pmu);
+ if (!uncore_pmu)
+ return;
+
+ box = uncore_pmu_to_box(uncore_pmu, smp_processor_id());
+ if (!box)
+ return;
+
+ if (uncore_pmu->type->ops->disable_box)
+ uncore_pmu->type->ops->disable_box(box);
+}
+
static ssize_t uncore_get_attr_cpumask(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -794,6 +824,8 @@ static int uncore_pmu_register(struct intel_uncore_pmu *pmu)
pmu->pmu = (struct pmu) {
.attr_groups = pmu->type->attr_groups,
.task_ctx_nr = perf_invalid_context,
+ .pmu_enable = uncore_pmu_enable,
+ .pmu_disable = uncore_pmu_disable,
.event_init = uncore_pmu_event_init,
.add = uncore_pmu_event_add,
.del = uncore_pmu_event_del,
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index 42fa3974c421c..40e040ec31b50 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -412,18 +412,6 @@ static inline int uncore_freerunning_hw_config(struct intel_uncore_box *box,
return -EINVAL;
}
-static inline void uncore_disable_box(struct intel_uncore_box *box)
-{
- if (box->pmu->type->ops->disable_box)
- box->pmu->type->ops->disable_box(box);
-}
-
-static inline void uncore_enable_box(struct intel_uncore_box *box)
-{
- if (box->pmu->type->ops->enable_box)
- box->pmu->type->ops->enable_box(box);
-}
-
static inline void uncore_disable_event(struct intel_uncore_box *box,
struct perf_event *event)
{
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 097/125] perf/x86/uncore: Fix event group support
2019-11-11 18:28 ` [PATCH 4.19 097/125] perf/x86/uncore: Fix event group support Greg Kroah-Hartman
@ 2019-11-13 10:35 ` Pavel Machek
2019-11-13 13:04 ` Liang, Kan
0 siblings, 1 reply; 145+ messages in thread
From: Pavel Machek @ 2019-11-13 10:35 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Kan Liang, Peter Zijlstra (Intel),
Alexander Shishkin, Arnaldo Carvalho de Melo, Jiri Olsa,
Linus Torvalds, Mark Rutland, Namhyung Kim, Stephane Eranian,
Thomas Gleixner, Vince Weaver, linux-drivers-review, linux-perf,
Ingo Molnar, Sasha Levin
[-- Attachment #1: Type: text/plain, Size: 762 bytes --]
Hi!
> return ret;
> }
>
> +static void uncore_pmu_enable(struct pmu *pmu)
> +{
> + struct intel_uncore_pmu *uncore_pmu;
> + struct intel_uncore_box *box;
> +
> + uncore_pmu = container_of(pmu, struct intel_uncore_pmu, pmu);
> + if (!uncore_pmu)
> + return;
AFAICT this test can never trigger.
> +static void uncore_pmu_disable(struct pmu *pmu)
> +{
> + struct intel_uncore_pmu *uncore_pmu;
> + struct intel_uncore_box *box;
> +
> + uncore_pmu = container_of(pmu, struct intel_uncore_pmu, pmu);
> + if (!uncore_pmu)
> + return;
And neither can this one.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 097/125] perf/x86/uncore: Fix event group support
2019-11-13 10:35 ` Pavel Machek
@ 2019-11-13 13:04 ` Liang, Kan
0 siblings, 0 replies; 145+ messages in thread
From: Liang, Kan @ 2019-11-13 13:04 UTC (permalink / raw)
To: Pavel Machek, Greg Kroah-Hartman
Cc: linux-kernel, stable, Peter Zijlstra (Intel),
Alexander Shishkin, Arnaldo Carvalho de Melo, Jiri Olsa,
Linus Torvalds, Mark Rutland, Namhyung Kim, Stephane Eranian,
Thomas Gleixner, Vince Weaver, linux-drivers-review, linux-perf,
Ingo Molnar, Sasha Levin
On 11/13/2019 5:35 AM, Pavel Machek wrote:
> Hi!
>
>> return ret;
>> }
>>
>> +static void uncore_pmu_enable(struct pmu *pmu)
>> +{
>> + struct intel_uncore_pmu *uncore_pmu;
>> + struct intel_uncore_box *box;
>> +
>> + uncore_pmu = container_of(pmu, struct intel_uncore_pmu, pmu);
>> + if (!uncore_pmu)
>> + return;
>
> AFAICT this test can never trigger.
>
>> +static void uncore_pmu_disable(struct pmu *pmu)
>> +{
>> + struct intel_uncore_pmu *uncore_pmu;
>> + struct intel_uncore_box *box;
>> +
>> + uncore_pmu = container_of(pmu, struct intel_uncore_pmu, pmu);
>> + if (!uncore_pmu)
>> + return;
>
> And neither can this one.
I will submit a patch to fix it.
Thanks,
Kan
^ permalink raw reply [flat|nested] 145+ messages in thread
* [PATCH 4.19 098/125] USB: Skip endpoints with 0 maxpacket length
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (96 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 097/125] perf/x86/uncore: Fix event group support Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 099/125] USB: ldusb: use unsigned size format specifiers Greg Kroah-Hartman
` (30 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alan Stern, Sasha Levin
From: Alan Stern <stern@rowland.harvard.edu>
[ Upstream commit d482c7bb0541d19dea8bff437a9f3c5563b5b2d2 ]
Endpoints with a maxpacket length of 0 are probably useless. They
can't transfer any data, and it's not at all unlikely that an HCD will
crash or hang when trying to handle an URB for such an endpoint.
Currently the USB core does not check for endpoints having a maxpacket
value of 0. This patch adds a check, printing a warning and skipping
over any endpoints it catches.
Now, the USB spec does not rule out endpoints having maxpacket = 0.
But since they wouldn't have any practical use, there doesn't seem to
be any good reason for us to accept them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281050420.1485-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/core/config.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 921ad6998dec7..1eb72be75fb7b 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -348,6 +348,11 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
/* Validate the wMaxPacketSize field */
maxp = usb_endpoint_maxp(&endpoint->desc);
+ if (maxp == 0) {
+ dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has wMaxPacketSize 0, skipping\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
+ goto skip_to_next_endpoint_or_interface_descriptor;
+ }
/* Find the highest legal maxpacket size for this endpoint */
i = 0; /* additional transactions per microframe */
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 099/125] USB: ldusb: use unsigned size format specifiers
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (97 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 098/125] USB: Skip endpoints with 0 maxpacket length Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:28 ` [PATCH 4.19 100/125] usbip: tools: Fix read_usb_vudc_device() error path handling Greg Kroah-Hartman
` (29 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold, Sasha Levin
From: Johan Hovold <johan@kernel.org>
[ Upstream commit 88f6bf3846ee90bf33aa1ce848cd3bfb3229f4a4 ]
A recent info-leak bug manifested itself along with warning about a
negative buffer overflow:
ldusb 1-1:0.28: Read buffer overflow, -131383859965943 bytes dropped
when it was really a rather large positive one.
A sanity check that prevents this has now been put in place, but let's
fix up the size format specifiers, which should all be unsigned.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191022143203.5260-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/misc/ldusb.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 320b06e0724b1..67c1b8f5d54d6 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -487,7 +487,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
}
bytes_to_read = min(count, *actual_buffer);
if (bytes_to_read < *actual_buffer)
- dev_warn(&dev->intf->dev, "Read buffer overflow, %zd bytes dropped\n",
+ dev_warn(&dev->intf->dev, "Read buffer overflow, %zu bytes dropped\n",
*actual_buffer-bytes_to_read);
/* copy one interrupt_in_buffer from ring_buffer into userspace */
@@ -562,8 +562,9 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
/* write the data into interrupt_out_buffer from userspace */
bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size);
if (bytes_to_write < count)
- dev_warn(&dev->intf->dev, "Write buffer overflow, %zd bytes dropped\n", count-bytes_to_write);
- dev_dbg(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n",
+ dev_warn(&dev->intf->dev, "Write buffer overflow, %zu bytes dropped\n",
+ count - bytes_to_write);
+ dev_dbg(&dev->intf->dev, "%s: count = %zu, bytes_to_write = %zu\n",
__func__, count, bytes_to_write);
if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) {
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 100/125] usbip: tools: Fix read_usb_vudc_device() error path handling
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (98 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 099/125] USB: ldusb: use unsigned size format specifiers Greg Kroah-Hartman
@ 2019-11-11 18:28 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 101/125] RDMA/iw_cxgb4: Avoid freeing skb twice in arp failure case Greg Kroah-Hartman
` (28 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:28 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, GwanYeong Kim, Shuah Khan, Sasha Levin
From: GwanYeong Kim <gy741.kim@gmail.com>
[ Upstream commit 28df0642abbf6d66908a2858922a7e4b21cdd8c2 ]
This isn't really accurate right. fread() doesn't always
return 0 in error. It could return < number of elements
and set errno.
Signed-off-by: GwanYeong Kim <gy741.kim@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191018032223.4644-1-gy741.kim@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/usb/usbip/libsrc/usbip_device_driver.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/tools/usb/usbip/libsrc/usbip_device_driver.c b/tools/usb/usbip/libsrc/usbip_device_driver.c
index ec3a0b794f159..67ae6c1557b8c 100644
--- a/tools/usb/usbip/libsrc/usbip_device_driver.c
+++ b/tools/usb/usbip/libsrc/usbip_device_driver.c
@@ -81,7 +81,7 @@ int read_usb_vudc_device(struct udev_device *sdev, struct usbip_usb_device *dev)
FILE *fd = NULL;
struct udev_device *plat;
const char *speed;
- int ret = 0;
+ size_t ret;
plat = udev_device_get_parent(sdev);
path = udev_device_get_syspath(plat);
@@ -91,8 +91,10 @@ int read_usb_vudc_device(struct udev_device *sdev, struct usbip_usb_device *dev)
if (!fd)
return -1;
ret = fread((char *) &descr, sizeof(descr), 1, fd);
- if (ret < 0)
+ if (ret != 1) {
+ err("Cannot read vudc device descr file: %s", strerror(errno));
goto err;
+ }
fclose(fd);
copy_descr_attr(dev, &descr, bDeviceClass);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 101/125] RDMA/iw_cxgb4: Avoid freeing skb twice in arp failure case
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (99 preceding siblings ...)
2019-11-11 18:28 ` [PATCH 4.19 100/125] usbip: tools: Fix read_usb_vudc_device() error path handling Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 102/125] RDMA/hns: Prevent memory leaks of eq->buf_list Greg Kroah-Hartman
` (27 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dakshaja Uppalapati,
Potnuri Bharat Teja, Jason Gunthorpe, Sasha Levin
From: Potnuri Bharat Teja <bharat@chelsio.com>
[ Upstream commit d4934f45693651ea15357dd6c7c36be28b6da884 ]
_put_ep_safe() and _put_pass_ep_safe() free the skb before it is freed by
process_work(). fix double free by freeing the skb only in process_work().
Fixes: 1dad0ebeea1c ("iw_cxgb4: Avoid touch after free error in ARP failure handlers")
Link: https://lore.kernel.org/r/1572006880-5800-1-git-send-email-bharat@chelsio.com
Signed-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/cxgb4/cm.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 566bfcc6add0d..a5ff1f0f2073e 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -493,7 +493,6 @@ static int _put_ep_safe(struct c4iw_dev *dev, struct sk_buff *skb)
ep = *((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *)));
release_ep_resources(ep);
- kfree_skb(skb);
return 0;
}
@@ -504,7 +503,6 @@ static int _put_pass_ep_safe(struct c4iw_dev *dev, struct sk_buff *skb)
ep = *((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *)));
c4iw_put_ep(&ep->parent_ep->com);
release_ep_resources(ep);
- kfree_skb(skb);
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 102/125] RDMA/hns: Prevent memory leaks of eq->buf_list
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (100 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 101/125] RDMA/iw_cxgb4: Avoid freeing skb twice in arp failure case Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 103/125] scsi: qla2xxx: stop timer in shutdown path Greg Kroah-Hartman
` (26 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lijun Ou, Weihang Li,
Jason Gunthorpe, Sasha Levin
From: Lijun Ou <oulijun@huawei.com>
[ Upstream commit b681a0529968d2261aa15d7a1e78801b2c06bb07 ]
eq->buf_list->buf and eq->buf_list should also be freed when eqe_hop_num
is set to 0, or there will be memory leaks.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/1572072995-11277-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index a442b29e76119..cf878e1b71fc1 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -4572,9 +4572,9 @@ static void hns_roce_v2_free_eq(struct hns_roce_dev *hr_dev,
return;
}
- if (eq->buf_list)
- dma_free_coherent(hr_dev->dev, buf_chk_sz,
- eq->buf_list->buf, eq->buf_list->map);
+ dma_free_coherent(hr_dev->dev, buf_chk_sz, eq->buf_list->buf,
+ eq->buf_list->map);
+ kfree(eq->buf_list);
}
static void hns_roce_config_eqc(struct hns_roce_dev *hr_dev,
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 103/125] scsi: qla2xxx: stop timer in shutdown path
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (101 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 102/125] RDMA/hns: Prevent memory leaks of eq->buf_list Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 104/125] nvme-multipath: fix possible io hang after ctrl reconnect Greg Kroah-Hartman
` (25 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicholas Piggin, Himanshu Madhani,
Martin K. Petersen, Sasha Levin
From: Nicholas Piggin <npiggin@gmail.com>
[ Upstream commit d3566abb1a1e7772116e4d50fb6a58d19c9802e5 ]
In shutdown/reboot paths, the timer is not stopped:
qla2x00_shutdown
pci_device_shutdown
device_shutdown
kernel_restart_prepare
kernel_restart
sys_reboot
This causes lockups (on powerpc) when firmware config space access calls
are interrupted by smp_send_stop later in reboot.
Fixes: e30d1756480dc ("[SCSI] qla2xxx: Addition of shutdown callback handler.")
Link: https://lore.kernel.org/r/20191024063804.14538-1-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_os.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 856a7ceb9a041..18ee614fe07f5 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -3496,6 +3496,10 @@ qla2x00_shutdown(struct pci_dev *pdev)
qla2x00_try_to_stop_firmware(vha);
}
+ /* Disable timer */
+ if (vha->timer_active)
+ qla2x00_stop_timer(vha);
+
/* Turn adapter off line */
vha->flags.online = 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 104/125] nvme-multipath: fix possible io hang after ctrl reconnect
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (102 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 103/125] scsi: qla2xxx: stop timer in shutdown path Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 105/125] fjes: Handle workqueue allocation failure Greg Kroah-Hartman
` (24 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sagi Grimberg, Anton Eidelman,
Keith Busch, Jens Axboe, Sasha Levin
From: Anton Eidelman <anton@lightbitslabs.com>
[ Upstream commit af8fd0424713a2adb812d10d55e86718152cf656 ]
The following scenario results in an IO hang:
1) ctrl completes a request with NVME_SC_ANA_TRANSITION.
NVME_NS_ANA_PENDING bit in ns->flags is set and ana_work is triggered.
2) ana_work: nvme_read_ana_log() tries to get the ANA log page from the ctrl.
This fails because ctrl disconnects.
Therefore nvme_update_ns_ana_state() is not called
and NVME_NS_ANA_PENDING bit in ns->flags is not cleared.
3) ctrl reconnects: nvme_mpath_init(ctrl,...) calls
nvme_read_ana_log(ctrl, groups_only=true).
However, nvme_update_ana_state() does not update namespaces
because nr_nsids = 0 (due to groups_only mode).
4) scan_work calls nvme_validate_ns() finds the ns and re-validates OK.
Result:
The ctrl is now live but NVME_NS_ANA_PENDING bit in ns->flags is still set.
Consequently ctrl will never be considered a viable path by __nvme_find_path().
IO will hang if ctrl is the only or the last path to the namespace.
More generally, while ctrl is reconnecting, its ANA state may change.
And because nvme_mpath_init() requests ANA log in groups_only mode,
these changes are not propagated to the existing ctrl namespaces.
This may result in a mal-function or an IO hang.
Solution:
nvme_mpath_init() will nvme_read_ana_log() with groups_only set to false.
This will not harm the new ctrl case (no namespaces present),
and will make sure the ANA state of namespaces gets updated after reconnect.
Note: Another option would be for nvme_mpath_init() to invoke
nvme_parse_ana_log(..., nvme_set_ns_ana_state) for each existing namespace.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/host/multipath.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 892ef52122329..838ee58d80cda 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -575,7 +575,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
goto out;
}
- error = nvme_read_ana_log(ctrl, true);
+ error = nvme_read_ana_log(ctrl, false);
if (error)
goto out_free_ana_log_buf;
return 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 105/125] fjes: Handle workqueue allocation failure
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (103 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 104/125] nvme-multipath: fix possible io hang after ctrl reconnect Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 106/125] net: hisilicon: Fix "Trying to free already-free IRQ" Greg Kroah-Hartman
` (23 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David S. Miller, Nicolas Waisman,
Will Deacon, Sasha Levin
From: Will Deacon <will@kernel.org>
[ Upstream commit 85ac30fa2e24f628e9f4f9344460f4015d33fd7d ]
In the highly unlikely event that we fail to allocate either of the
"/txrx" or "/control" workqueues, we should bail cleanly rather than
blindly march on with NULL queue pointer(s) installed in the
'fjes_adapter' instance.
Cc: "David S. Miller" <davem@davemloft.net>
Reported-by: Nicolas Waisman <nico@semmle.com>
Link: https://lore.kernel.org/lkml/CADJ_3a8WFrs5NouXNqS5WYe7rebFP+_A5CheeqAyD_p7DFJJcg@mail.gmail.com/
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/fjes/fjes_main.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/net/fjes/fjes_main.c b/drivers/net/fjes/fjes_main.c
index d3eae12390457..61a9843346ad7 100644
--- a/drivers/net/fjes/fjes_main.c
+++ b/drivers/net/fjes/fjes_main.c
@@ -1252,8 +1252,17 @@ static int fjes_probe(struct platform_device *plat_dev)
adapter->open_guard = false;
adapter->txrx_wq = alloc_workqueue(DRV_NAME "/txrx", WQ_MEM_RECLAIM, 0);
+ if (unlikely(!adapter->txrx_wq)) {
+ err = -ENOMEM;
+ goto err_free_netdev;
+ }
+
adapter->control_wq = alloc_workqueue(DRV_NAME "/control",
WQ_MEM_RECLAIM, 0);
+ if (unlikely(!adapter->control_wq)) {
+ err = -ENOMEM;
+ goto err_free_txrx_wq;
+ }
INIT_WORK(&adapter->tx_stall_task, fjes_tx_stall_task);
INIT_WORK(&adapter->raise_intr_rxdata_task,
@@ -1270,7 +1279,7 @@ static int fjes_probe(struct platform_device *plat_dev)
hw->hw_res.irq = platform_get_irq(plat_dev, 0);
err = fjes_hw_init(&adapter->hw);
if (err)
- goto err_free_netdev;
+ goto err_free_control_wq;
/* setup MAC address (02:00:00:00:00:[epid])*/
netdev->dev_addr[0] = 2;
@@ -1292,6 +1301,10 @@ static int fjes_probe(struct platform_device *plat_dev)
err_hw_exit:
fjes_hw_exit(&adapter->hw);
+err_free_control_wq:
+ destroy_workqueue(adapter->control_wq);
+err_free_txrx_wq:
+ destroy_workqueue(adapter->txrx_wq);
err_free_netdev:
free_netdev(netdev);
err_out:
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 106/125] net: hisilicon: Fix "Trying to free already-free IRQ"
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (104 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 105/125] fjes: Handle workqueue allocation failure Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 107/125] net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up Greg Kroah-Hartman
` (22 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiangfeng Xiao, David S. Miller, Sasha Levin
From: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
[ Upstream commit 63a41746827cb16dc6ad0d4d761ab4e7dda7a0c3 ]
When rmmod hip04_eth.ko, we can get the following warning:
Task track: rmmod(1623)>bash(1591)>login(1581)>init(1)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1623 at kernel/irq/manage.c:1557 __free_irq+0xa4/0x2ac()
Trying to free already-free IRQ 200
Modules linked in: ping(O) pramdisk(O) cpuinfo(O) rtos_snapshot(O) interrupt_ctrl(O) mtdblock mtd_blkdevrtfs nfs_acl nfs lockd grace sunrpc xt_tcpudp ipt_REJECT iptable_filter ip_tables x_tables nf_reject_ipv
CPU: 0 PID: 1623 Comm: rmmod Tainted: G O 4.4.193 #1
Hardware name: Hisilicon A15
[<c020b408>] (rtos_unwind_backtrace) from [<c0206624>] (show_stack+0x10/0x14)
[<c0206624>] (show_stack) from [<c03f2be4>] (dump_stack+0xa0/0xd8)
[<c03f2be4>] (dump_stack) from [<c021a780>] (warn_slowpath_common+0x84/0xb0)
[<c021a780>] (warn_slowpath_common) from [<c021a7e8>] (warn_slowpath_fmt+0x3c/0x68)
[<c021a7e8>] (warn_slowpath_fmt) from [<c026876c>] (__free_irq+0xa4/0x2ac)
[<c026876c>] (__free_irq) from [<c0268a14>] (free_irq+0x60/0x7c)
[<c0268a14>] (free_irq) from [<c0469e80>] (release_nodes+0x1c4/0x1ec)
[<c0469e80>] (release_nodes) from [<c0466924>] (__device_release_driver+0xa8/0x104)
[<c0466924>] (__device_release_driver) from [<c0466a80>] (driver_detach+0xd0/0xf8)
[<c0466a80>] (driver_detach) from [<c0465e18>] (bus_remove_driver+0x64/0x8c)
[<c0465e18>] (bus_remove_driver) from [<c02935b0>] (SyS_delete_module+0x198/0x1e0)
[<c02935b0>] (SyS_delete_module) from [<c0202ed0>] (__sys_trace_return+0x0/0x10)
---[ end trace bb25d6123d849b44 ]---
Currently "rmmod hip04_eth.ko" call free_irq more than once
as devres_release_all and hip04_remove both call free_irq.
This results in a 'Trying to free already-free IRQ' warning.
To solve the problem free_irq has been moved out of hip04_remove.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hip04_eth.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index 2f8f03e0db81e..644ad78d00515 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -945,7 +945,6 @@ static int hip04_remove(struct platform_device *pdev)
hip04_free_ring(ndev, d);
unregister_netdev(ndev);
- free_irq(ndev->irq, ndev);
of_node_put(priv->phy_node);
cancel_work_sync(&priv->tx_timeout_task);
free_netdev(ndev);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 107/125] net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (105 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 106/125] net: hisilicon: Fix "Trying to free already-free IRQ" Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 108/125] net: mscc: ocelot: refuse to overwrite the ports native vlan Greg Kroah-Hartman
` (21 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Antoine Tenart, Alexandre Belloni,
Vladimir Oltean, Florian Fainelli, Horatiu Vultur,
David S. Miller, Sasha Levin
From: Vladimir Oltean <olteanv@gmail.com>
[ Upstream commit 1c44ce560b4de639f237b458be1729489ff44d0a ]
Background information: the driver operates the hardware in a mode where
a single VLAN can be transmitted as untagged on a particular egress
port. That is the "native VLAN on trunk port" use case. Its value is
held in port->vid.
Consider the following command sequence (no network manager, all
interfaces are down, debugging prints added by me):
$ ip link add dev br0 type bridge vlan_filtering 1
$ ip link set dev swp0 master br0
Kernel code path during last command:
br_add_slave -> ocelot_netdevice_port_event (NETDEV_CHANGEUPPER):
[ 21.401901] ocelot_vlan_port_apply: port 0 vlan aware 0 pvid 0 vid 0
br_add_slave -> nbp_vlan_init -> switchdev_port_attr_set -> ocelot_port_attr_set (SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING):
[ 21.413335] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 0 vid 0
br_add_slave -> nbp_vlan_init -> nbp_vlan_add -> br_switchdev_port_vlan_add -> switchdev_port_obj_add -> ocelot_port_obj_add -> ocelot_vlan_vid_add
[ 21.667421] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 1
So far so good. The bridge has replaced the driver's default pvid used
in standalone mode (0) with its own default_pvid (1). The port's vid
(native VLAN) has also changed from 0 to 1.
$ ip link set dev swp0 up
[ 31.722956] 8021q: adding VLAN 0 to HW filter on device swp0
do_setlink -> dev_change_flags -> vlan_vid_add -> ocelot_vlan_rx_add_vid -> ocelot_vlan_vid_add:
[ 31.728700] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 0
The 8021q module uses the .ndo_vlan_rx_add_vid API on .ndo_open to make
ports be able to transmit and receive 802.1p-tagged traffic by default.
This API is supposed to offload a VLAN sub-interface, which for a switch
port means to add a VLAN that is not a pvid, and tagged on egress.
But the driver implementation of .ndo_vlan_rx_add_vid is wrong: it adds
back vid 0 as "egress untagged". Now back to the initial paragraph:
there is a single untagged VID that the driver keeps track of, and that
has just changed from 1 (the pvid) to 0. So this breaks the bridge
core's expectation, because it has changed vid 1 from untagged to
tagged, when what the user sees is.
$ bridge vlan
port vlan ids
swp0 1 PVID Egress Untagged
br0 1 PVID Egress Untagged
But curiously, instead of manifesting itself as "untagged and
pvid-tagged traffic gets sent as tagged on egress", the bug:
- is hidden when vlan_filtering=0
- manifests as dropped traffic when vlan_filtering=1, due to this setting:
if (port->vlan_aware && !port->vid)
/* If port is vlan-aware and tagged, drop untagged and priority
* tagged frames.
*/
val |= ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA;
which would have made sense if it weren't for this bug. The setting's
intention was "this is a trunk port with no native VLAN, so don't accept
untagged traffic". So the driver was never expecting to set VLAN 0 as
the value of the native VLAN, 0 was just encoding for "invalid".
So the fix is to not send 802.1p traffic as untagged, because that would
change the port's native vlan to 0, unbeknownst to the bridge, and
trigger unexpected code paths in the driver.
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mscc/ocelot.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index e05a59ae9a593..965f13944c76b 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -886,7 +886,7 @@ end:
static int ocelot_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
u16 vid)
{
- return ocelot_vlan_vid_add(dev, vid, false, true);
+ return ocelot_vlan_vid_add(dev, vid, false, false);
}
static int ocelot_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 108/125] net: mscc: ocelot: refuse to overwrite the ports native vlan
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (106 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 107/125] net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 109/125] iommu/amd: Apply the same IVRS IOAPIC workaround to Acer Aspire A315-41 Greg Kroah-Hartman
` (20 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Antoine Tenart, Alexandre Belloni,
Vladimir Oltean, Florian Fainelli, David S. Miller, Sasha Levin
From: Vladimir Oltean <olteanv@gmail.com>
[ Upstream commit b9cd75e6689560140dadaed98eb4b41aad75d55d ]
The switch driver keeps a "vid" variable per port, which signifies _the_
VLAN ID that is stripped on that port's egress (aka the native VLAN on a
trunk port).
That is the way the hardware is designed (mostly). The port->vid is
programmed into REW:PORT:PORT_VLAN_CFG:PORT_VID and the rewriter is told
to send all traffic as tagged except the one having port->vid.
There exists a possibility of finer-grained egress untagging decisions:
using the VCAP IS1 engine, one rule can be added to match every
VLAN-tagged frame whose VLAN should be untagged, and set POP_CNT=1 as
action. However, the IS1 can hold at most 512 entries, and the VLANs are
in the order of 6 * 4096.
So the code is fine for now. But this sequence of commands:
$ bridge vlan add dev swp0 vid 1 pvid untagged
$ bridge vlan add dev swp0 vid 2 untagged
makes untagged and pvid-tagged traffic be sent out of swp0 as tagged
with VID 1, despite user's request.
Prevent that from happening. The user should temporarily remove the
existing untagged VLAN (1 in this case), add it back as tagged, and then
add the new untagged VLAN (2 in this case).
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mscc/ocelot.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 965f13944c76b..a29a6a618110e 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -253,8 +253,15 @@ static int ocelot_vlan_vid_add(struct net_device *dev, u16 vid, bool pvid,
port->pvid = vid;
/* Untagged egress vlan clasification */
- if (untagged)
+ if (untagged && port->vid != vid) {
+ if (port->vid) {
+ dev_err(ocelot->dev,
+ "Port already has a native VLAN: %d\n",
+ port->vid);
+ return -EBUSY;
+ }
port->vid = vid;
+ }
ocelot_vlan_port_apply(ocelot, port);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 109/125] iommu/amd: Apply the same IVRS IOAPIC workaround to Acer Aspire A315-41
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (107 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 108/125] net: mscc: ocelot: refuse to overwrite the ports native vlan Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 110/125] drm/amdgpu: If amdgpu_ib_schedule fails return back the error Greg Kroah-Hartman
` (19 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Takashi Iwai, Joerg Roedel, Sasha Levin
From: Takashi Iwai <tiwai@suse.de>
[ Upstream commit ad3e8da2d422c63c13819a53d3c5ea9312cc0b9d ]
Acer Aspire A315-41 requires the very same workaround as the existing
quirk for Dell Latitude 5495. Add the new entry for that.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1137799
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/amd_iommu_quirks.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/iommu/amd_iommu_quirks.c b/drivers/iommu/amd_iommu_quirks.c
index c235f79b7a200..5120ce4fdce32 100644
--- a/drivers/iommu/amd_iommu_quirks.c
+++ b/drivers/iommu/amd_iommu_quirks.c
@@ -73,6 +73,19 @@ static const struct dmi_system_id ivrs_quirks[] __initconst = {
},
.driver_data = (void *)&ivrs_ioapic_quirks[DELL_LATITUDE_5495],
},
+ {
+ /*
+ * Acer Aspire A315-41 requires the very same workaround as
+ * Dell Latitude 5495
+ */
+ .callback = ivrs_ioapic_quirk_cb,
+ .ident = "Acer Aspire A315-41",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A315-41"),
+ },
+ .driver_data = (void *)&ivrs_ioapic_quirks[DELL_LATITUDE_5495],
+ },
{
.callback = ivrs_ioapic_quirk_cb,
.ident = "Lenovo ideapad 330S-15ARR",
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 110/125] drm/amdgpu: If amdgpu_ib_schedule fails return back the error.
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (108 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 109/125] iommu/amd: Apply the same IVRS IOAPIC workaround to Acer Aspire A315-41 Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 111/125] drm/amd/display: Passive DP->HDMI dongle detection fix Greg Kroah-Hartman
` (18 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrey Grodzovsky,
Christian König, Alex Deucher, Sasha Levin
From: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
[ Upstream commit 57c0f58e9f562089de5f0b60da103677d232374c ]
Use ERR_PTR to return back the error happened during amdgpu_ib_schedule.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
index f823d4baf044d..cf582cc46d53e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
@@ -203,7 +203,7 @@ static struct dma_fence *amdgpu_job_run(struct drm_sched_job *sched_job)
struct amdgpu_ring *ring = to_amdgpu_ring(sched_job->sched);
struct dma_fence *fence = NULL, *finished;
struct amdgpu_job *job;
- int r;
+ int r = 0;
job = to_amdgpu_job(sched_job);
finished = &job->base.s_fence->finished;
@@ -228,6 +228,8 @@ static struct dma_fence *amdgpu_job_run(struct drm_sched_job *sched_job)
job->fence = dma_fence_get(fence);
amdgpu_job_free_resources(job);
+
+ fence = r ? ERR_PTR(r) : fence;
return fence;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 111/125] drm/amd/display: Passive DP->HDMI dongle detection fix
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (109 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 110/125] drm/amdgpu: If amdgpu_ib_schedule fails return back the error Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 112/125] hv_netvsc: Fix error handling in netvsc_attach() Greg Kroah-Hartman
` (17 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Strauss, Tony Cheng, Leo Li,
Alex Deucher, Sasha Levin
From: Michael Strauss <michael.strauss@amd.com>
[ Upstream commit bc2fde42e2418808dbfc04de1a6da91d7d31cf1a ]
[WHY]
i2c_read is called to differentiate passive DP->HDMI and DP->DVI-D dongles
The call is expected to fail in DVI-D case but pass in HDMI case
Some HDMI dongles have a chance to fail as well, causing misdetection as DVI-D
[HOW]
Retry i2c_read to ensure failed result is valid
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../gpu/drm/amd/display/dc/core/dc_link_ddc.c | 24 ++++++++++++++-----
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
index 8def0d9fa0ff0..46c9cb47a96e5 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
@@ -433,6 +433,7 @@ void dal_ddc_service_i2c_query_dp_dual_mode_adaptor(
enum display_dongle_type *dongle = &sink_cap->dongle_type;
uint8_t type2_dongle_buf[DP_ADAPTOR_TYPE2_SIZE];
bool is_type2_dongle = false;
+ int retry_count = 2;
struct dp_hdmi_dongle_signature_data *dongle_signature;
/* Assume we have no valid DP passive dongle connected */
@@ -445,13 +446,24 @@ void dal_ddc_service_i2c_query_dp_dual_mode_adaptor(
DP_HDMI_DONGLE_ADDRESS,
type2_dongle_buf,
sizeof(type2_dongle_buf))) {
- *dongle = DISPLAY_DONGLE_DP_DVI_DONGLE;
- sink_cap->max_hdmi_pixel_clock = DP_ADAPTOR_DVI_MAX_TMDS_CLK;
+ /* Passive HDMI dongles can sometimes fail here without retrying*/
+ while (retry_count > 0) {
+ if (i2c_read(ddc,
+ DP_HDMI_DONGLE_ADDRESS,
+ type2_dongle_buf,
+ sizeof(type2_dongle_buf)))
+ break;
+ retry_count--;
+ }
+ if (retry_count == 0) {
+ *dongle = DISPLAY_DONGLE_DP_DVI_DONGLE;
+ sink_cap->max_hdmi_pixel_clock = DP_ADAPTOR_DVI_MAX_TMDS_CLK;
- CONN_DATA_DETECT(ddc->link, type2_dongle_buf, sizeof(type2_dongle_buf),
- "DP-DVI passive dongle %dMhz: ",
- DP_ADAPTOR_DVI_MAX_TMDS_CLK / 1000);
- return;
+ CONN_DATA_DETECT(ddc->link, type2_dongle_buf, sizeof(type2_dongle_buf),
+ "DP-DVI passive dongle %dMhz: ",
+ DP_ADAPTOR_DVI_MAX_TMDS_CLK / 1000);
+ return;
+ }
}
/* Check if Type 2 dongle.*/
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 112/125] hv_netvsc: Fix error handling in netvsc_attach()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (110 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 111/125] drm/amd/display: Passive DP->HDMI dongle detection fix Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 113/125] usb: dwc3: gadget: fix race when disabling ep with cancelled xfers Greg Kroah-Hartman
` (16 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Haiyang Zhang, David S. Miller, Sasha Levin
From: Haiyang Zhang <haiyangz@microsoft.com>
[ Upstream commit 719b85c336ed35565d0f3982269d6f684087bb00 ]
If rndis_filter_open() fails, we need to remove the rndis device created
in earlier steps, before returning an error code. Otherwise, the retry of
netvsc_attach() from its callers will fail and hang.
Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/hyperv/netvsc_drv.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 6f6c0dbd91fc8..b7a71c203aa37 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -993,7 +993,7 @@ static int netvsc_attach(struct net_device *ndev,
if (netif_running(ndev)) {
ret = rndis_filter_open(nvdev);
if (ret)
- return ret;
+ goto err;
rdev = nvdev->extension;
if (!rdev->link_state)
@@ -1001,6 +1001,13 @@ static int netvsc_attach(struct net_device *ndev,
}
return 0;
+
+err:
+ netif_device_detach(ndev);
+
+ rndis_filter_device_remove(hdev, nvdev);
+
+ return ret;
}
static int netvsc_set_channels(struct net_device *net,
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 113/125] usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (111 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 112/125] hv_netvsc: Fix error handling in netvsc_attach() Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-13 13:52 ` Pavel Machek
2019-11-11 18:29 ` [PATCH 4.19 114/125] NFSv4: Dont allow a cached open with a revoked delegation Greg Kroah-Hartman
` (15 subsequent siblings)
128 siblings, 1 reply; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Roger Quadros, Felipe Balbi, Sasha Levin
From: Felipe Balbi <felipe.balbi@linux.intel.com>
[ Upstream commit d8eca64eec7103ab1fbabc0a187dbf6acfb2af93 ]
When disabling an endpoint which has cancelled requests, we should
make sure to giveback requests that are currently pending in the
cancelled list, otherwise we may fall into a situation where command
completion interrupt fires after endpoint has been disabled, therefore
causing a splat.
Fixes: fec9095bdef4 "usb: dwc3: gadget: remove wait_end_transfer"
Reported-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Link: https://lore.kernel.org/r/20191031090713.1452818-1-felipe.balbi@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/dwc3/gadget.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 54de732550648..8398c33d08e7c 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -698,6 +698,12 @@ static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
}
+
+ while (!list_empty(&dep->cancelled_list)) {
+ req = next_request(&dep->cancelled_list);
+
+ dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+ }
}
/**
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 113/125] usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
2019-11-11 18:29 ` [PATCH 4.19 113/125] usb: dwc3: gadget: fix race when disabling ep with cancelled xfers Greg Kroah-Hartman
@ 2019-11-13 13:52 ` Pavel Machek
0 siblings, 0 replies; 145+ messages in thread
From: Pavel Machek @ 2019-11-13 13:52 UTC (permalink / raw)
To: pavel; +Cc: linux-kernel, Roger Quadros, Felipe Balbi, Sasha Levin
[-- Attachment #1: Type: text/plain, Size: 1666 bytes --]
Hi!
> From: Felipe Balbi <felipe.balbi@linux.intel.com>
>
> [ Upstream commit d8eca64eec7103ab1fbabc0a187dbf6acfb2af93 ]
>
> When disabling an endpoint which has cancelled requests, we should
> make sure to giveback requests that are currently pending in the
> cancelled list, otherwise we may fall into a situation where command
> completion interrupt fires after endpoint has been disabled, therefore
> causing a splat.
>
> Fixes: fec9095bdef4 "usb: dwc3: gadget: remove wait_end_transfer"
> Reported-by: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
> Link: https://lore.kernel.org/r/20191031090713.1452818-1-felipe.balbi@linux.intel.com
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
> drivers/usb/dwc3/gadget.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 54de732550648..8398c33d08e7c 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -698,6 +698,12 @@ static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
>
> dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
> }
> +
> + while (!list_empty(&dep->cancelled_list)) {
> + req = next_request(&dep->cancelled_list);
> +
> + dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
> + }
> }
This is third copy of a loop. Perhaps it is time to create a helper?
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 145+ messages in thread
* [PATCH 4.19 114/125] NFSv4: Dont allow a cached open with a revoked delegation
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (112 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 113/125] usb: dwc3: gadget: fix race when disabling ep with cancelled xfers Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 115/125] net: ethernet: arc: add the missed clk_disable_unprepare Greg Kroah-Hartman
` (14 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Trond Myklebust, Anna Schumaker, Sasha Levin
From: Trond Myklebust <trondmy@gmail.com>
[ Upstream commit be3df3dd4c70ee020587a943a31b98a0fb4b6424 ]
If the delegation is marked as being revoked, we must not use it
for cached opens.
Fixes: 869f9dfa4d6d ("NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/delegation.c | 10 ++++++++++
fs/nfs/delegation.h | 1 +
fs/nfs/nfs4proc.c | 7 ++-----
3 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 825a8c52165a2..c5c3394148f72 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -54,6 +54,16 @@ nfs4_is_valid_delegation(const struct nfs_delegation *delegation,
return false;
}
+struct nfs_delegation *nfs4_get_valid_delegation(const struct inode *inode)
+{
+ struct nfs_delegation *delegation;
+
+ delegation = rcu_dereference(NFS_I(inode)->delegation);
+ if (nfs4_is_valid_delegation(delegation, 0))
+ return delegation;
+ return NULL;
+}
+
static int
nfs4_do_check_delegation(struct inode *inode, fmode_t flags, bool mark)
{
diff --git a/fs/nfs/delegation.h b/fs/nfs/delegation.h
index c95477823fa6b..dd0f3eed3890d 100644
--- a/fs/nfs/delegation.h
+++ b/fs/nfs/delegation.h
@@ -66,6 +66,7 @@ int nfs4_lock_delegation_recall(struct file_lock *fl, struct nfs4_state *state,
bool nfs4_copy_delegation_stateid(struct inode *inode, fmode_t flags, nfs4_stateid *dst, struct rpc_cred **cred);
bool nfs4_refresh_delegation_stateid(nfs4_stateid *dst, struct inode *inode);
+struct nfs_delegation *nfs4_get_valid_delegation(const struct inode *inode);
void nfs_mark_delegation_referenced(struct nfs_delegation *delegation);
int nfs4_have_delegation(struct inode *inode, fmode_t flags);
int nfs4_check_delegation(struct inode *inode, fmode_t flags);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 75faef7af22d3..792f8821b5d6b 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1393,8 +1393,6 @@ static int can_open_delegated(struct nfs_delegation *delegation, fmode_t fmode,
return 0;
if ((delegation->type & fmode) != fmode)
return 0;
- if (test_bit(NFS_DELEGATION_RETURNING, &delegation->flags))
- return 0;
switch (claim) {
case NFS4_OPEN_CLAIM_NULL:
case NFS4_OPEN_CLAIM_FH:
@@ -1751,7 +1749,6 @@ static void nfs4_return_incompatible_delegation(struct inode *inode, fmode_t fmo
static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata)
{
struct nfs4_state *state = opendata->state;
- struct nfs_inode *nfsi = NFS_I(state->inode);
struct nfs_delegation *delegation;
int open_mode = opendata->o_arg.open_flags;
fmode_t fmode = opendata->o_arg.fmode;
@@ -1768,7 +1765,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata)
}
spin_unlock(&state->owner->so_lock);
rcu_read_lock();
- delegation = rcu_dereference(nfsi->delegation);
+ delegation = nfs4_get_valid_delegation(state->inode);
if (!can_open_delegated(delegation, fmode, claim)) {
rcu_read_unlock();
break;
@@ -2293,7 +2290,7 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata)
data->o_arg.open_flags, claim))
goto out_no_action;
rcu_read_lock();
- delegation = rcu_dereference(NFS_I(data->state->inode)->delegation);
+ delegation = nfs4_get_valid_delegation(data->state->inode);
if (can_open_delegated(delegation, data->o_arg.fmode, claim))
goto unlock_no_action;
rcu_read_unlock();
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 115/125] net: ethernet: arc: add the missed clk_disable_unprepare
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (113 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 114/125] NFSv4: Dont allow a cached open with a revoked delegation Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 116/125] igb: Fix constant media auto sense switching when no cable is connected Greg Kroah-Hartman
` (13 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chuhong Yuan, David S. Miller, Sasha Levin
From: Chuhong Yuan <hslester96@gmail.com>
[ Upstream commit 4202e219edd6cc164c042e16fa327525410705ae ]
The remove misses to disable and unprepare priv->macclk like what is done
when probe fails.
Add the missed call in remove.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/arc/emac_rockchip.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/arc/emac_rockchip.c b/drivers/net/ethernet/arc/emac_rockchip.c
index 0f65768026072..a1df2ebab07f0 100644
--- a/drivers/net/ethernet/arc/emac_rockchip.c
+++ b/drivers/net/ethernet/arc/emac_rockchip.c
@@ -265,6 +265,9 @@ static int emac_rockchip_remove(struct platform_device *pdev)
if (priv->regulator)
regulator_disable(priv->regulator);
+ if (priv->soc_data->need_div_macclk)
+ clk_disable_unprepare(priv->macclk);
+
free_netdev(ndev);
return err;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 116/125] igb: Fix constant media auto sense switching when no cable is connected
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (114 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 115/125] net: ethernet: arc: add the missed clk_disable_unprepare Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 117/125] e1000: fix memory leaks Greg Kroah-Hartman
` (12 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manfred Rudigier, Aaron Brown,
Jeff Kirsher, Sasha Levin
From: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
[ Upstream commit 8d5cfd7f76a2414e23c74bb8858af7540365d985 ]
At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.
If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.
The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/igb/igb_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ab76a5f77cd0e..36db874f3c928 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2064,7 +2064,8 @@ static void igb_check_swap_media(struct igb_adapter *adapter)
if ((hw->phy.media_type == e1000_media_type_copper) &&
(!(connsw & E1000_CONNSW_AUTOSENSE_EN))) {
swap_now = true;
- } else if (!(connsw & E1000_CONNSW_SERDESD)) {
+ } else if ((hw->phy.media_type != e1000_media_type_copper) &&
+ !(connsw & E1000_CONNSW_SERDESD)) {
/* copper signal takes time to appear */
if (adapter->copper_tries < 4) {
adapter->copper_tries++;
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 117/125] e1000: fix memory leaks
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (115 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 116/125] igb: Fix constant media auto sense switching when no cable is connected Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 118/125] pinctrl: intel: Avoid potential glitches if pin is in GPIO mode Greg Kroah-Hartman
` (11 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wenwen Wang, Aaron Brown,
Jeff Kirsher, Sasha Levin
From: Wenwen Wang <wenwen@cs.uga.edu>
[ Upstream commit 8472ba62154058b64ebb83d5f57259a352d28697 ]
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 2569a168334cb..903b0a902cb95 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -607,6 +607,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
for (i = 0; i < adapter->num_rx_queues; i++)
rxdr[i].count = rxdr->count;
+ err = 0;
if (netif_running(adapter->netdev)) {
/* Try to get new resources before deleting old */
err = e1000_setup_all_rx_resources(adapter);
@@ -627,14 +628,13 @@ static int e1000_set_ringparam(struct net_device *netdev,
adapter->rx_ring = rxdr;
adapter->tx_ring = txdr;
err = e1000_up(adapter);
- if (err)
- goto err_setup;
}
kfree(tx_old);
kfree(rx_old);
clear_bit(__E1000_RESETTING, &adapter->flags);
- return 0;
+ return err;
+
err_setup_tx:
e1000_free_all_rx_resources(adapter);
err_setup_rx:
@@ -646,7 +646,6 @@ err_alloc_rx:
err_alloc_tx:
if (netif_running(adapter->netdev))
e1000_up(adapter);
-err_setup:
clear_bit(__E1000_RESETTING, &adapter->flags);
return err;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 118/125] pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (116 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 117/125] e1000: fix memory leaks Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 119/125] ocfs2: protect extent tree in ocfs2_prepare_inode_for_write() Greg Kroah-Hartman
` (10 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, fei.yang, Oliver Barta,
Malin Jonsson, Andy Shevchenko, Mika Westerberg, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 29c2c6aa32405dfee4a29911a51ba133edcedb0f ]
When consumer requests a pin, in order to be on the safest side,
we switch it first to GPIO mode followed by immediate transition
to the input state. Due to posted writes it's luckily to be a single
I/O transaction.
However, if firmware or boot loader already configures the pin
to the GPIO mode, user expects no glitches for the requested pin.
We may check if the pin is pre-configured and leave it as is
till the actual consumer toggles its state to avoid glitches.
Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Depends-on: f5a26acf0162 ("pinctrl: intel: Initialize GPIO properly when used through irqchip")
Cc: stable@vger.kernel.org
Cc: fei.yang@intel.com
Reported-by: Oliver Barta <oliver.barta@aptiv.com>
Reported-by: Malin Jonsson <malin.jonsson@ericsson.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/intel/pinctrl-intel.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 1ea3438ea67e9..89ff2795a8b55 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -49,6 +49,7 @@
#define PADCFG0_GPIROUTNMI BIT(17)
#define PADCFG0_PMODE_SHIFT 10
#define PADCFG0_PMODE_MASK (0xf << PADCFG0_PMODE_SHIFT)
+#define PADCFG0_PMODE_GPIO 0
#define PADCFG0_GPIORXDIS BIT(9)
#define PADCFG0_GPIOTXDIS BIT(8)
#define PADCFG0_GPIORXSTATE BIT(1)
@@ -301,7 +302,7 @@ static void intel_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
cfg1 = readl(intel_get_padcfg(pctrl, pin, PADCFG1));
mode = (cfg0 & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT;
- if (!mode)
+ if (mode == PADCFG0_PMODE_GPIO)
seq_puts(s, "GPIO ");
else
seq_printf(s, "mode %d ", mode);
@@ -422,6 +423,11 @@ static void __intel_gpio_set_direction(void __iomem *padcfg0, bool input)
writel(value, padcfg0);
}
+static int intel_gpio_get_gpio_mode(void __iomem *padcfg0)
+{
+ return (readl(padcfg0) & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT;
+}
+
static void intel_gpio_set_gpio_mode(void __iomem *padcfg0)
{
u32 value;
@@ -450,7 +456,20 @@ static int intel_gpio_request_enable(struct pinctrl_dev *pctldev,
}
padcfg0 = intel_get_padcfg(pctrl, pin, PADCFG0);
+
+ /*
+ * If pin is already configured in GPIO mode, we assume that
+ * firmware provides correct settings. In such case we avoid
+ * potential glitches on the pin. Otherwise, for the pin in
+ * alternative mode, consumer has to supply respective flags.
+ */
+ if (intel_gpio_get_gpio_mode(padcfg0) == PADCFG0_PMODE_GPIO) {
+ raw_spin_unlock_irqrestore(&pctrl->lock, flags);
+ return 0;
+ }
+
intel_gpio_set_gpio_mode(padcfg0);
+
/* Disable TX buffer and enable RX (this will be input) */
__intel_gpio_set_direction(padcfg0, true);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 119/125] ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (117 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 118/125] pinctrl: intel: Avoid potential glitches if pin is in GPIO mode Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 120/125] pinctrl: cherryview: Fix irq_valid_mask calculation Greg Kroah-Hartman
` (9 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shuning Zhang, Junxiao Bi, Gang He,
Mark Fasheh, Joel Becker, Joseph Qi, Changwei Ge, Jun Piao,
Andrew Morton, Linus Torvalds, Sasha Levin
From: Shuning Zhang <sunny.s.zhang@oracle.com>
[ Upstream commit e74540b285569d2b1e14fe7aee92297078f235ce ]
When the extent tree is modified, it should be protected by inode
cluster lock and ip_alloc_sem.
The extent tree is accessed and modified in the
ocfs2_prepare_inode_for_write, but isn't protected by ip_alloc_sem.
The following is a case. The function ocfs2_fiemap is accessing the
extent tree, which is modified at the same time.
kernel BUG at fs/ocfs2/extent_map.c:475!
invalid opcode: 0000 [#1] SMP
Modules linked in: tun ocfs2 ocfs2_nodemanager configfs ocfs2_stackglue [...]
CPU: 16 PID: 14047 Comm: o2info Not tainted 4.1.12-124.23.1.el6uek.x86_64 #2
Hardware name: Oracle Corporation ORACLE SERVER X7-2L/ASM, MB MECH, X7-2L, BIOS 42040600 10/19/2018
task: ffff88019487e200 ti: ffff88003daa4000 task.ti: ffff88003daa4000
RIP: ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2]
Call Trace:
ocfs2_fiemap+0x1e3/0x430 [ocfs2]
do_vfs_ioctl+0x155/0x510
SyS_ioctl+0x81/0xa0
system_call_fastpath+0x18/0xd8
Code: 18 48 c7 c6 60 7f 65 a0 31 c0 bb e2 ff ff ff 48 8b 4a 40 48 8b 7a 28 48 c7 c2 78 2d 66 a0 e8 38 4f 05 00 e9 28 fe ff ff 0f 1f 00 <0f> 0b 66 0f 1f 44 00 00 bb 86 ff ff ff e9 13 fe ff ff 66 0f 1f
RIP ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2]
---[ end trace c8aa0c8180e869dc ]---
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
This issue can be reproduced every week in a production environment.
This issue is related to the usage mode. If others use ocfs2 in this
mode, the kernel will panic frequently.
[akpm@linux-foundation.org: coding style fixes]
[Fix new warning due to unused function by removing said function - Linus ]
Link: http://lkml.kernel.org/r/1568772175-2906-2-git-send-email-sunny.s.zhang@oracle.com
Signed-off-by: Shuning Zhang <sunny.s.zhang@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ocfs2/file.c | 134 ++++++++++++++++++++++++++++++++----------------
1 file changed, 90 insertions(+), 44 deletions(-)
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 9fa35cb6f6e0b..a847fe52c56ee 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2106,54 +2106,90 @@ static int ocfs2_is_io_unaligned(struct inode *inode, size_t count, loff_t pos)
return 0;
}
-static int ocfs2_prepare_inode_for_refcount(struct inode *inode,
- struct file *file,
- loff_t pos, size_t count,
- int *meta_level)
+static int ocfs2_inode_lock_for_extent_tree(struct inode *inode,
+ struct buffer_head **di_bh,
+ int meta_level,
+ int overwrite_io,
+ int write_sem,
+ int wait)
{
- int ret;
- struct buffer_head *di_bh = NULL;
- u32 cpos = pos >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
- u32 clusters =
- ocfs2_clusters_for_bytes(inode->i_sb, pos + count) - cpos;
+ int ret = 0;
- ret = ocfs2_inode_lock(inode, &di_bh, 1);
- if (ret) {
- mlog_errno(ret);
+ if (wait)
+ ret = ocfs2_inode_lock(inode, NULL, meta_level);
+ else
+ ret = ocfs2_try_inode_lock(inode,
+ overwrite_io ? NULL : di_bh, meta_level);
+ if (ret < 0)
goto out;
+
+ if (wait) {
+ if (write_sem)
+ down_write(&OCFS2_I(inode)->ip_alloc_sem);
+ else
+ down_read(&OCFS2_I(inode)->ip_alloc_sem);
+ } else {
+ if (write_sem)
+ ret = down_write_trylock(&OCFS2_I(inode)->ip_alloc_sem);
+ else
+ ret = down_read_trylock(&OCFS2_I(inode)->ip_alloc_sem);
+
+ if (!ret) {
+ ret = -EAGAIN;
+ goto out_unlock;
+ }
}
- *meta_level = 1;
+ return ret;
- ret = ocfs2_refcount_cow(inode, di_bh, cpos, clusters, UINT_MAX);
- if (ret)
- mlog_errno(ret);
+out_unlock:
+ brelse(*di_bh);
+ ocfs2_inode_unlock(inode, meta_level);
out:
- brelse(di_bh);
return ret;
}
+static void ocfs2_inode_unlock_for_extent_tree(struct inode *inode,
+ struct buffer_head **di_bh,
+ int meta_level,
+ int write_sem)
+{
+ if (write_sem)
+ up_write(&OCFS2_I(inode)->ip_alloc_sem);
+ else
+ up_read(&OCFS2_I(inode)->ip_alloc_sem);
+
+ brelse(*di_bh);
+ *di_bh = NULL;
+
+ if (meta_level >= 0)
+ ocfs2_inode_unlock(inode, meta_level);
+}
+
static int ocfs2_prepare_inode_for_write(struct file *file,
loff_t pos, size_t count, int wait)
{
int ret = 0, meta_level = 0, overwrite_io = 0;
+ int write_sem = 0;
struct dentry *dentry = file->f_path.dentry;
struct inode *inode = d_inode(dentry);
struct buffer_head *di_bh = NULL;
loff_t end;
+ u32 cpos;
+ u32 clusters;
/*
* We start with a read level meta lock and only jump to an ex
* if we need to make modifications here.
*/
for(;;) {
- if (wait)
- ret = ocfs2_inode_lock(inode, NULL, meta_level);
- else
- ret = ocfs2_try_inode_lock(inode,
- overwrite_io ? NULL : &di_bh, meta_level);
+ ret = ocfs2_inode_lock_for_extent_tree(inode,
+ &di_bh,
+ meta_level,
+ overwrite_io,
+ write_sem,
+ wait);
if (ret < 0) {
- meta_level = -1;
if (ret != -EAGAIN)
mlog_errno(ret);
goto out;
@@ -2165,15 +2201,8 @@ static int ocfs2_prepare_inode_for_write(struct file *file,
*/
if (!wait && !overwrite_io) {
overwrite_io = 1;
- if (!down_read_trylock(&OCFS2_I(inode)->ip_alloc_sem)) {
- ret = -EAGAIN;
- goto out_unlock;
- }
ret = ocfs2_overwrite_io(inode, di_bh, pos, count);
- brelse(di_bh);
- di_bh = NULL;
- up_read(&OCFS2_I(inode)->ip_alloc_sem);
if (ret < 0) {
if (ret != -EAGAIN)
mlog_errno(ret);
@@ -2192,7 +2221,10 @@ static int ocfs2_prepare_inode_for_write(struct file *file,
* set inode->i_size at the end of a write. */
if (should_remove_suid(dentry)) {
if (meta_level == 0) {
- ocfs2_inode_unlock(inode, meta_level);
+ ocfs2_inode_unlock_for_extent_tree(inode,
+ &di_bh,
+ meta_level,
+ write_sem);
meta_level = 1;
continue;
}
@@ -2208,18 +2240,32 @@ static int ocfs2_prepare_inode_for_write(struct file *file,
ret = ocfs2_check_range_for_refcount(inode, pos, count);
if (ret == 1) {
- ocfs2_inode_unlock(inode, meta_level);
- meta_level = -1;
-
- ret = ocfs2_prepare_inode_for_refcount(inode,
- file,
- pos,
- count,
- &meta_level);
+ ocfs2_inode_unlock_for_extent_tree(inode,
+ &di_bh,
+ meta_level,
+ write_sem);
+ ret = ocfs2_inode_lock_for_extent_tree(inode,
+ &di_bh,
+ meta_level,
+ overwrite_io,
+ 1,
+ wait);
+ write_sem = 1;
+ if (ret < 0) {
+ if (ret != -EAGAIN)
+ mlog_errno(ret);
+ goto out;
+ }
+
+ cpos = pos >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
+ clusters =
+ ocfs2_clusters_for_bytes(inode->i_sb, pos + count) - cpos;
+ ret = ocfs2_refcount_cow(inode, di_bh, cpos, clusters, UINT_MAX);
}
if (ret < 0) {
- mlog_errno(ret);
+ if (ret != -EAGAIN)
+ mlog_errno(ret);
goto out_unlock;
}
@@ -2230,10 +2276,10 @@ out_unlock:
trace_ocfs2_prepare_inode_for_write(OCFS2_I(inode)->ip_blkno,
pos, count, wait);
- brelse(di_bh);
-
- if (meta_level >= 0)
- ocfs2_inode_unlock(inode, meta_level);
+ ocfs2_inode_unlock_for_extent_tree(inode,
+ &di_bh,
+ meta_level,
+ write_sem);
out:
return ret;
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 120/125] pinctrl: cherryview: Fix irq_valid_mask calculation
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (118 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 119/125] ocfs2: protect extent tree in ocfs2_prepare_inode_for_write() Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 121/125] blkcg: make blkcg_print_stat() print stats only for online blkgs Greg Kroah-Hartman
` (8 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Andy Shevchenko,
Mika Westerberg, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 63bdef6cd6941917c823b9cc9aa0219d19fcb716 ]
Commit 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux
GPIO translation") has made the cherryview gpio numbers sparse, to get
a 1:1 mapping between ACPI pin numbers and gpio numbers in Linux.
This has greatly simplified things, but the code setting the
irq_valid_mask was not updated for this, so the valid mask is still in
the old "compressed" numbering with the gaps in the pin numbers skipped,
which is wrong as irq_valid_mask needs to be expressed in gpio numbers.
This results in the following error on devices using pin 24 (0x0018) on
the north GPIO controller as an ACPI event source:
[ 0.422452] cherryview-pinctrl INT33FF:01: Failed to translate GPIO to IRQ
This has been reported (by email) to be happening on a Caterpillar CAT T20
tablet and I've reproduced this myself on a Medion Akoya e2215t 2-in-1.
This commit uses the pin number instead of the compressed index into
community->pins to clear the correct bits in irq_valid_mask for GPIOs
using GPEs for interrupts, fixing these errors and in case of the
Medion Akoya e2215t also fixing the LID switch not working.
Cc: stable@vger.kernel.org
Fixes: 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/intel/pinctrl-cherryview.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index 227646eb817c8..9eab508395814 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -1595,7 +1595,7 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
intsel >>= CHV_PADCTRL0_INTSEL_SHIFT;
if (need_valid_mask && intsel >= community->nirqs)
- clear_bit(i, chip->irq.valid_mask);
+ clear_bit(desc->number, chip->irq.valid_mask);
}
/*
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 121/125] blkcg: make blkcg_print_stat() print stats only for online blkgs
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (119 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 120/125] pinctrl: cherryview: Fix irq_valid_mask calculation Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 122/125] iio: imu: mpu6050: Add support for the ICM 20602 IMU Greg Kroah-Hartman
` (7 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tejun Heo, Roman Gushchin,
Josef Bacik, Jens Axboe, Sasha Levin
From: Tejun Heo <tj@kernel.org>
[ Upstream commit b0814361a25cba73a224548843ed92d8ea78715a ]
blkcg_print_stat() iterates blkgs under RCU and doesn't test whether
the blkg is online. This can call into pd_stat_fn() on a pd which is
still being initialized leading to an oops.
The heaviest operation - recursively summing up rwstat counters - is
already done while holding the queue_lock. Expand queue_lock to cover
the other operations and skip the blkg if it isn't online yet. The
online state is protected by both blkcg and queue locks, so this
guarantees that only online blkgs are processed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Roman Gushchin <guro@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Fixes: 903d23f0a354 ("blk-cgroup: allow controllers to output their own stats")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/blk-cgroup.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 5275241346930..a06547fe6f6b4 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -955,9 +955,14 @@ static int blkcg_print_stat(struct seq_file *sf, void *v)
int i;
bool has_stats = false;
+ spin_lock_irq(blkg->q->queue_lock);
+
+ if (!blkg->online)
+ goto skip;
+
dname = blkg_dev_name(blkg);
if (!dname)
- continue;
+ goto skip;
/*
* Hooray string manipulation, count is the size written NOT
@@ -967,8 +972,6 @@ static int blkcg_print_stat(struct seq_file *sf, void *v)
*/
off += scnprintf(buf+off, size-off, "%s ", dname);
- spin_lock_irq(blkg->q->queue_lock);
-
rwstat = blkg_rwstat_recursive_sum(blkg, NULL,
offsetof(struct blkcg_gq, stat_bytes));
rbytes = atomic64_read(&rwstat.aux_cnt[BLKG_RWSTAT_READ]);
@@ -981,8 +984,6 @@ static int blkcg_print_stat(struct seq_file *sf, void *v)
wios = atomic64_read(&rwstat.aux_cnt[BLKG_RWSTAT_WRITE]);
dios = atomic64_read(&rwstat.aux_cnt[BLKG_RWSTAT_DISCARD]);
- spin_unlock_irq(blkg->q->queue_lock);
-
if (rbytes || wbytes || rios || wios) {
has_stats = true;
off += scnprintf(buf+off, size-off,
@@ -1023,6 +1024,8 @@ next:
seq_commit(sf, -1);
}
}
+ skip:
+ spin_unlock_irq(blkg->q->queue_lock);
}
rcu_read_unlock();
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 122/125] iio: imu: mpu6050: Add support for the ICM 20602 IMU
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (120 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 121/125] blkcg: make blkcg_print_stat() print stats only for online blkgs Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 123/125] iio: imu: inv_mpu6050: fix no data on MPU6050 Greg Kroah-Hartman
` (6 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randolph Maaßen,
Jonathan Cameron, Sasha Levin
From: Randolph Maaßen <gaireg@gaireg.de>
[ Upstream commit 22904bdff97839960bd98b3452a583b1daee628b ]
The Invensense ICM-20602 is a 6-axis MotionTracking device that
combines a 3-axis gyroscope and an 3-axis accelerometer. It is very
similar to the ICM-20608 imu which is already supported by the mpu6050
driver. The main difference is that the ICM-20602 has the i2c bus
disable bit in a separate register.
Signed-off-by: Randolph Maaßen <gaireg@gaireg.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/imu/inv_mpu6050/Kconfig | 8 +++---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 31 ++++++++++++++++++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 6 +++++
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 8 ++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 12 ++++++---
5 files changed, 58 insertions(+), 7 deletions(-)
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index 5483b2ea754dd..d2fe9dbddda74 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -13,8 +13,8 @@ config INV_MPU6050_I2C
select INV_MPU6050_IIO
select REGMAP_I2C
help
- This driver supports the Invensense MPU6050/6500/9150 and ICM20608
- motion tracking devices over I2C.
+ This driver supports the Invensense MPU6050/6500/9150 and
+ ICM20608/20602 motion tracking devices over I2C.
This driver can be built as a module. The module will be called
inv-mpu6050-i2c.
@@ -24,7 +24,7 @@ config INV_MPU6050_SPI
select INV_MPU6050_IIO
select REGMAP_SPI
help
- This driver supports the Invensense MPU6050/6500/9150 and ICM20608
- motion tracking devices over SPI.
+ This driver supports the Invensense MPU6050/6500/9150 and
+ ICM20608/20602 motion tracking devices over SPI.
This driver can be built as a module. The module will be called
inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index d80ef468508a1..cb80c9e49fc7b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -37,6 +37,29 @@ static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724};
*/
static const int accel_scale[] = {598, 1196, 2392, 4785};
+static const struct inv_mpu6050_reg_map reg_set_icm20602 = {
+ .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV,
+ .lpf = INV_MPU6050_REG_CONFIG,
+ .accel_lpf = INV_MPU6500_REG_ACCEL_CONFIG_2,
+ .user_ctrl = INV_MPU6050_REG_USER_CTRL,
+ .fifo_en = INV_MPU6050_REG_FIFO_EN,
+ .gyro_config = INV_MPU6050_REG_GYRO_CONFIG,
+ .accl_config = INV_MPU6050_REG_ACCEL_CONFIG,
+ .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H,
+ .fifo_r_w = INV_MPU6050_REG_FIFO_R_W,
+ .raw_gyro = INV_MPU6050_REG_RAW_GYRO,
+ .raw_accl = INV_MPU6050_REG_RAW_ACCEL,
+ .temperature = INV_MPU6050_REG_TEMPERATURE,
+ .int_enable = INV_MPU6050_REG_INT_ENABLE,
+ .int_status = INV_MPU6050_REG_INT_STATUS,
+ .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1,
+ .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2,
+ .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG,
+ .accl_offset = INV_MPU6500_REG_ACCEL_OFFSET,
+ .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET,
+ .i2c_if = INV_ICM20602_REG_I2C_IF,
+};
+
static const struct inv_mpu6050_reg_map reg_set_6500 = {
.sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV,
.lpf = INV_MPU6050_REG_CONFIG,
@@ -57,6 +80,7 @@ static const struct inv_mpu6050_reg_map reg_set_6500 = {
.int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG,
.accl_offset = INV_MPU6500_REG_ACCEL_OFFSET,
.gyro_offset = INV_MPU6050_REG_GYRO_OFFSET,
+ .i2c_if = 0,
};
static const struct inv_mpu6050_reg_map reg_set_6050 = {
@@ -77,6 +101,7 @@ static const struct inv_mpu6050_reg_map reg_set_6050 = {
.int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG,
.accl_offset = INV_MPU6050_REG_ACCEL_OFFSET,
.gyro_offset = INV_MPU6050_REG_GYRO_OFFSET,
+ .i2c_if = 0,
};
static const struct inv_mpu6050_chip_config chip_config_6050 = {
@@ -139,6 +164,12 @@ static const struct inv_mpu6050_hw hw_info[] = {
.reg = ®_set_6500,
.config = &chip_config_6050,
},
+ {
+ .whoami = INV_ICM20602_WHOAMI_VALUE,
+ .name = "ICM20602",
+ .reg = ®_set_icm20602,
+ .config = &chip_config_6050,
+ },
};
int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index dd758e3d403da..e46eb4ddea210 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -127,6 +127,7 @@ static int inv_mpu_probe(struct i2c_client *client,
st = iio_priv(dev_get_drvdata(&client->dev));
switch (st->chip_type) {
case INV_ICM20608:
+ case INV_ICM20602:
/* no i2c auxiliary bus on the chip */
break;
default:
@@ -179,6 +180,7 @@ static const struct i2c_device_id inv_mpu_id[] = {
{"mpu9250", INV_MPU9250},
{"mpu9255", INV_MPU9255},
{"icm20608", INV_ICM20608},
+ {"icm20602", INV_ICM20602},
{}
};
@@ -213,6 +215,10 @@ static const struct of_device_id inv_of_match[] = {
.compatible = "invensense,icm20608",
.data = (void *)INV_ICM20608
},
+ {
+ .compatible = "invensense,icm20602",
+ .data = (void *)INV_ICM20602
+ },
{ }
};
MODULE_DEVICE_TABLE(of, inv_of_match);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index e69a59659dbcf..bdbaf6e01ce3e 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -44,6 +44,7 @@
* @int_pin_cfg; Controls interrupt pin configuration.
* @accl_offset: Controls the accelerometer calibration offset.
* @gyro_offset: Controls the gyroscope calibration offset.
+ * @i2c_if: Controls the i2c interface
*/
struct inv_mpu6050_reg_map {
u8 sample_rate_div;
@@ -65,6 +66,7 @@ struct inv_mpu6050_reg_map {
u8 int_pin_cfg;
u8 accl_offset;
u8 gyro_offset;
+ u8 i2c_if;
};
/*device enum */
@@ -77,6 +79,7 @@ enum inv_devices {
INV_MPU9250,
INV_MPU9255,
INV_ICM20608,
+ INV_ICM20602,
INV_NUM_PARTS
};
@@ -193,6 +196,10 @@ struct inv_mpu6050_state {
#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
+/* ICM20602 register */
+#define INV_ICM20602_REG_I2C_IF 0x70
+#define INV_ICM20602_BIT_I2C_IF_DIS 0x40
+
#define INV_MPU6050_REG_FIFO_COUNT_H 0x72
#define INV_MPU6050_REG_FIFO_R_W 0x74
@@ -259,6 +266,7 @@ struct inv_mpu6050_state {
#define INV_MPU9255_WHOAMI_VALUE 0x73
#define INV_MPU6515_WHOAMI_VALUE 0x74
#define INV_ICM20608_WHOAMI_VALUE 0xAF
+#define INV_ICM20602_WHOAMI_VALUE 0x12
/* scan element definition */
enum inv_mpu6050_scan {
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
index 227f50afff22f..a112c3f45f748 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -31,9 +31,14 @@ static int inv_mpu_i2c_disable(struct iio_dev *indio_dev)
if (ret)
return ret;
- st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS;
- ret = regmap_write(st->map, st->reg->user_ctrl,
- st->chip_config.user_ctrl);
+ if (st->reg->i2c_if) {
+ ret = regmap_write(st->map, st->reg->i2c_if,
+ INV_ICM20602_BIT_I2C_IF_DIS);
+ } else {
+ st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS;
+ ret = regmap_write(st->map, st->reg->user_ctrl,
+ st->chip_config.user_ctrl);
+ }
if (ret) {
inv_mpu6050_set_power_itg(st, false);
return ret;
@@ -81,6 +86,7 @@ static const struct spi_device_id inv_mpu_id[] = {
{"mpu9250", INV_MPU9250},
{"mpu9255", INV_MPU9255},
{"icm20608", INV_ICM20608},
+ {"icm20602", INV_ICM20602},
{}
};
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* [PATCH 4.19 123/125] iio: imu: inv_mpu6050: fix no data on MPU6050
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (121 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 122/125] iio: imu: mpu6050: Add support for the ICM 20602 IMU Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-13 10:42 ` Pavel Machek
2019-11-11 18:29 ` [PATCH 4.19 124/125] mm/filemap.c: dont initiate writeback if mapping has no dirty pages Greg Kroah-Hartman
` (5 subsequent siblings)
128 siblings, 1 reply; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jean-Baptiste Maneyrol,
Jonathan Cameron, Sasha Levin
From: Jean-Baptiste Maneyrol <JManeyrol@invensense.com>
[ Upstream commit 6e82ae6b8d11b948b74e71396efd8e074c415f44 ]
Some chips have a fifo overflow bit issue where the bit is always
set. The result is that every data is dropped.
Change fifo overflow management by checking fifo count against
a maximum value.
Add fifo size in chip hardware set of values.
Fixes: f5057e7b2dba ("iio: imu: inv_mpu6050: better fifo overflow handling")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +++++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 ++
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 15 ++++++++++++---
3 files changed, 23 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index cb80c9e49fc7b..ea099523e0355 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -121,54 +121,63 @@ static const struct inv_mpu6050_hw hw_info[] = {
.name = "MPU6050",
.reg = ®_set_6050,
.config = &chip_config_6050,
+ .fifo_size = 1024,
},
{
.whoami = INV_MPU6500_WHOAMI_VALUE,
.name = "MPU6500",
.reg = ®_set_6500,
.config = &chip_config_6050,
+ .fifo_size = 512,
},
{
.whoami = INV_MPU6515_WHOAMI_VALUE,
.name = "MPU6515",
.reg = ®_set_6500,
.config = &chip_config_6050,
+ .fifo_size = 512,
},
{
.whoami = INV_MPU6000_WHOAMI_VALUE,
.name = "MPU6000",
.reg = ®_set_6050,
.config = &chip_config_6050,
+ .fifo_size = 1024,
},
{
.whoami = INV_MPU9150_WHOAMI_VALUE,
.name = "MPU9150",
.reg = ®_set_6050,
.config = &chip_config_6050,
+ .fifo_size = 1024,
},
{
.whoami = INV_MPU9250_WHOAMI_VALUE,
.name = "MPU9250",
.reg = ®_set_6500,
.config = &chip_config_6050,
+ .fifo_size = 512,
},
{
.whoami = INV_MPU9255_WHOAMI_VALUE,
.name = "MPU9255",
.reg = ®_set_6500,
.config = &chip_config_6050,
+ .fifo_size = 512,
},
{
.whoami = INV_ICM20608_WHOAMI_VALUE,
.name = "ICM20608",
.reg = ®_set_6500,
.config = &chip_config_6050,
+ .fifo_size = 512,
},
{
.whoami = INV_ICM20602_WHOAMI_VALUE,
.name = "ICM20602",
.reg = ®_set_icm20602,
.config = &chip_config_6050,
+ .fifo_size = 1008,
},
};
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index bdbaf6e01ce3e..e56c1d191ae46 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -108,12 +108,14 @@ struct inv_mpu6050_chip_config {
* @name: name of the chip.
* @reg: register map of the chip.
* @config: configuration of the chip.
+ * @fifo_size: size of the FIFO in bytes.
*/
struct inv_mpu6050_hw {
u8 whoami;
u8 *name;
const struct inv_mpu6050_reg_map *reg;
const struct inv_mpu6050_chip_config *config;
+ size_t fifo_size;
};
/*
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 548e042f7b5bd..4f9c2765aa23f 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -188,9 +188,6 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
"failed to ack interrupt\n");
goto flush_fifo;
}
- /* handle fifo overflow by reseting fifo */
- if (int_status & INV_MPU6050_BIT_FIFO_OVERFLOW_INT)
- goto flush_fifo;
if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT)) {
dev_warn(regmap_get_device(st->map),
"spurious interrupt with status 0x%x\n", int_status);
@@ -216,6 +213,18 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
if (result)
goto end_session;
fifo_count = get_unaligned_be16(&data[0]);
+
+ /*
+ * Handle fifo overflow by resetting fifo.
+ * Reset if there is only 3 data set free remaining to mitigate
+ * possible delay between reading fifo count and fifo data.
+ */
+ nb = 3 * bytes_per_datum;
+ if (fifo_count >= st->hw->fifo_size - nb) {
+ dev_warn(regmap_get_device(st->map), "fifo overflow reset\n");
+ goto flush_fifo;
+ }
+
/* compute and process all complete datum */
nb = fifo_count / bytes_per_datum;
inv_mpu6050_update_period(st, pf->timestamp, nb);
--
2.20.1
^ permalink raw reply related [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 123/125] iio: imu: inv_mpu6050: fix no data on MPU6050
2019-11-11 18:29 ` [PATCH 4.19 123/125] iio: imu: inv_mpu6050: fix no data on MPU6050 Greg Kroah-Hartman
@ 2019-11-13 10:42 ` Pavel Machek
0 siblings, 0 replies; 145+ messages in thread
From: Pavel Machek @ 2019-11-13 10:42 UTC (permalink / raw)
To: pavel; +Cc: linux-kernel, Jean-Baptiste Maneyrol, Jonathan Cameron, Sasha Levin
[-- Attachment #1: Type: text/plain, Size: 2180 bytes --]
On Mon 2019-11-11 19:29:22, Greg Kroah-Hartman wrote:
> From: Jean-Baptiste Maneyrol <JManeyrol@invensense.com>
>
> [ Upstream commit 6e82ae6b8d11b948b74e71396efd8e074c415f44 ]
>
> Some chips have a fifo overflow bit issue where the bit is always
> set. The result is that every data is dropped.
>
> Change fifo overflow management by checking fifo count against
> a maximum value.
>
> Add fifo size in chip hardware set of values.
> @@ -216,6 +213,18 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
> if (result)
> goto end_session;
> fifo_count = get_unaligned_be16(&data[0]);
> +
> + /*
> + * Handle fifo overflow by resetting fifo.
> + * Reset if there is only 3 data set free remaining to mitigate
> + * possible delay between reading fifo count and fifo data.
> + */
> + nb = 3 * bytes_per_datum;
> + if (fifo_count >= st->hw->fifo_size - nb) {
> + dev_warn(regmap_get_device(st->map), "fifo overflow reset\n");
> + goto flush_fifo;
> + }
> +
> /* compute and process all complete datum */
> nb = fifo_count / bytes_per_datum;
> inv_mpu6050_update_period(st, pf->timestamp, nb);
Would this make sense to reduce code duplication?
Signed-off-by: Pavel Machek <pavel@denx.de>
Best regards,
Pavel
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 548e042f7b5b..9b9d90f41610 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -232,16 +232,12 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
timestamp = inv_mpu6050_get_timestamp(st);
iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp);
}
-
-end_session:
- mutex_unlock(&st->lock);
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
+ goto end_session;
flush_fifo:
/* Flush HW and SW FIFOs. */
inv_reset_fifo(indio_dev);
+end_session:
mutex_unlock(&st->lock);
iio_trigger_notify_done(indio_dev->trig);
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply related [flat|nested] 145+ messages in thread
* [PATCH 4.19 124/125] mm/filemap.c: dont initiate writeback if mapping has no dirty pages
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (122 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 123/125] iio: imu: inv_mpu6050: fix no data on MPU6050 Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-11 18:29 ` [PATCH 4.19 125/125] cgroup,writeback: dont switch wbs immediately on dead wbs if the memcg is dead Greg Kroah-Hartman
` (4 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Konstantin Khlebnikov, Jan Kara,
Tejun Heo, Jens Axboe, Johannes Weiner, Andrew Morton,
Linus Torvalds
From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
commit c3aab9a0bd91b696a852169479b7db1ece6cbf8c upstream.
Functions like filemap_write_and_wait_range() should do nothing if inode
has no dirty pages or pages currently under writeback. But they anyway
construct struct writeback_control and this does some atomic operations if
CONFIG_CGROUP_WRITEBACK=y - on fast path it locks inode->i_lock and
updates state of writeback ownership, on slow path might be more work.
Current this path is safely avoided only when inode mapping has no pages.
For example generic_file_read_iter() calls filemap_write_and_wait_range()
at each O_DIRECT read - pretty hot path.
This patch skips starting new writeback if mapping has no dirty tags set.
If writeback is already in progress filemap_write_and_wait_range() will
wait for it.
Link: http://lkml.kernel.org/r/156378816804.1087.8607636317907921438.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/filemap.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -438,7 +438,8 @@ int __filemap_fdatawrite_range(struct ad
.range_end = end,
};
- if (!mapping_cap_writeback_dirty(mapping))
+ if (!mapping_cap_writeback_dirty(mapping) ||
+ !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
return 0;
wbc_attach_fdatawrite_inode(&wbc, mapping->host);
^ permalink raw reply [flat|nested] 145+ messages in thread* [PATCH 4.19 125/125] cgroup,writeback: dont switch wbs immediately on dead wbs if the memcg is dead
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (123 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 124/125] mm/filemap.c: dont initiate writeback if mapping has no dirty pages Greg Kroah-Hartman
@ 2019-11-11 18:29 ` Greg Kroah-Hartman
2019-11-12 5:19 ` [PATCH 4.19 000/125] 4.19.84-stable review kernelci.org bot
` (3 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Greg Kroah-Hartman @ 2019-11-11 18:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Konstantin Khlebnikov, Dennis Zhou,
Tejun Heo, Jens Axboe
From: Tejun Heo <tj@kernel.org>
commit 65de03e251382306a4575b1779c57c87889eee49 upstream.
cgroup writeback tries to refresh the associated wb immediately if the
current wb is dead. This is to avoid keeping issuing IOs on the stale
wb after memcg - blkcg association has changed (ie. when blkcg got
disabled / enabled higher up in the hierarchy).
Unfortunately, the logic gets triggered spuriously on inodes which are
associated with dead cgroups. When the logic is triggered on dead
cgroups, the attempt fails only after doing quite a bit of work
allocating and initializing a new wb.
While c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping
has no dirty pages") alleviated the issue significantly as it now only
triggers when the inode has dirty pages. However, the condition can
still be triggered before the inode is switched to a different cgroup
and the logic simply doesn't make sense.
Skip the immediate switching if the associated memcg is dying.
This is a simplified version of the following two patches:
* https://lore.kernel.org/linux-mm/20190513183053.GA73423@dennisz-mbp/
* http://lkml.kernel.org/r/156355839560.2063.5265687291430814589.stgit@buzz
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: e8a7abf5a5bd ("writeback: disassociate inodes from dying bdi_writebacks")
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/fs-writeback.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -582,10 +582,13 @@ void wbc_attach_and_unlock_inode(struct
spin_unlock(&inode->i_lock);
/*
- * A dying wb indicates that the memcg-blkcg mapping has changed
- * and a new wb is already serving the memcg. Switch immediately.
+ * A dying wb indicates that either the blkcg associated with the
+ * memcg changed or the associated memcg is dying. In the first
+ * case, a replacement wb should already be available and we should
+ * refresh the wb immediately. In the second case, trying to
+ * refresh will keep failing.
*/
- if (unlikely(wb_dying(wbc->wb)))
+ if (unlikely(wb_dying(wbc->wb) && !css_is_dying(wbc->wb->memcg_css)))
inode_switch_wbs(inode, wbc->wb_id);
}
^ permalink raw reply [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 000/125] 4.19.84-stable review
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (124 preceding siblings ...)
2019-11-11 18:29 ` [PATCH 4.19 125/125] cgroup,writeback: dont switch wbs immediately on dead wbs if the memcg is dead Greg Kroah-Hartman
@ 2019-11-12 5:19 ` kernelci.org bot
2019-11-12 5:49 ` Naresh Kamboju
` (2 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: kernelci.org bot @ 2019-11-12 5:19 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
ben.hutchings, lkft-triage, stable
stable-rc/linux-4.19.y boot: 120 boots: 0 failed, 112 passed with 8 offline (v4.19.83-126-g0f8b6b0b5b94)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.19.83-126-g0f8b6b0b5b94/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.83-126-g0f8b6b0b5b94/
Tree: stable-rc
Branch: linux-4.19.y
Git Describe: v4.19.83-126-g0f8b6b0b5b94
Git Commit: 0f8b6b0b5b946b33f5b60e9de252afb809a17e6a
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 68 unique boards, 22 SoC families, 14 builds out of 206
Offline Platforms:
arm:
sunxi_defconfig:
gcc-8
sun5i-r8-chip: 1 offline lab
sun7i-a20-bananapi: 1 offline lab
multi_v7_defconfig:
gcc-8
qcom-apq8064-cm-qs600: 1 offline lab
sun5i-r8-chip: 1 offline lab
sun7i-a20-bananapi: 1 offline lab
davinci_all_defconfig:
gcc-8
dm365evm,legacy: 1 offline lab
qcom_defconfig:
gcc-8
qcom-apq8064-cm-qs600: 1 offline lab
arm64:
defconfig:
gcc-8
meson-axg-s400: 1 offline lab
---
For more info write to <info@kernelci.org>
^ permalink raw reply [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 000/125] 4.19.84-stable review
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (125 preceding siblings ...)
2019-11-12 5:19 ` [PATCH 4.19 000/125] 4.19.84-stable review kernelci.org bot
@ 2019-11-12 5:49 ` Naresh Kamboju
2019-11-12 12:01 ` Jon Hunter
2019-11-12 18:20 ` Guenter Roeck
128 siblings, 0 replies; 145+ messages in thread
From: Naresh Kamboju @ 2019-11-12 5:49 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
Shuah Khan, patches, Ben Hutchings, lkft-triage, linux- stable
On Tue, 12 Nov 2019 at 00:12, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.84 release.
> There are 125 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.84-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.19.84-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 0f8b6b0b5b946b33f5b60e9de252afb809a17e6a
git describe: v4.19.83-126-g0f8b6b0b5b94
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.83-126-g0f8b6b0b5b94
No regressions (compared to build v4.19.83-124-gb8764c8bac2d)
No fixes (compared to build v4.19.83-124-gb8764c8bac2d)
Ran 23945 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* network-basic-tests
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 000/125] 4.19.84-stable review
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
@ 2019-11-12 12:01 ` Jon Hunter
2019-11-11 18:27 ` [PATCH 4.19 002/125] CDC-NCM: handle incomplete transfer of MTU Greg Kroah-Hartman
` (127 subsequent siblings)
128 siblings, 0 replies; 145+ messages in thread
From: Jon Hunter @ 2019-11-12 12:01 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, ben.hutchings,
lkft-triage, stable, linux-tegra
On 11/11/2019 18:27, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.84 release.
> There are 125 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.84-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests for Tegra are passing ...
Test results for stable-v4.19:
12 builds: 12 pass, 0 fail
22 boots: 22 pass, 0 fail
32 tests: 32 pass, 0 fail
Linux version: 4.19.84-rc1-g0f8b6b0b5b94
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 145+ messages in thread* Re: [PATCH 4.19 000/125] 4.19.84-stable review
@ 2019-11-12 12:01 ` Jon Hunter
0 siblings, 0 replies; 145+ messages in thread
From: Jon Hunter @ 2019-11-12 12:01 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, ben.hutchings,
lkft-triage, stable, linux-tegra
On 11/11/2019 18:27, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.84 release.
> There are 125 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.84-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests for Tegra are passing ...
Test results for stable-v4.19:
12 builds: 12 pass, 0 fail
22 boots: 22 pass, 0 fail
32 tests: 32 pass, 0 fail
Linux version: 4.19.84-rc1-g0f8b6b0b5b94
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 145+ messages in thread
* Re: [PATCH 4.19 000/125] 4.19.84-stable review
2019-11-11 18:27 [PATCH 4.19 000/125] 4.19.84-stable review Greg Kroah-Hartman
` (127 preceding siblings ...)
2019-11-12 12:01 ` Jon Hunter
@ 2019-11-12 18:20 ` Guenter Roeck
128 siblings, 0 replies; 145+ messages in thread
From: Guenter Roeck @ 2019-11-12 18:20 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, ben.hutchings,
lkft-triage, stable
On Mon, Nov 11, 2019 at 07:27:19PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.84 release.
> There are 125 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 156 pass: 156 fail: 0
Qemu test results:
total: 390 pass: 390 fail: 0
Guenter
^ permalink raw reply [flat|nested] 145+ messages in thread