* Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
@ 2011-05-23 15:58 Roo - Andrew Baines
2011-05-23 16:14 ` Takashi Iwai
0 siblings, 1 reply; 14+ messages in thread
From: Roo - Andrew Baines @ 2011-05-23 15:58 UTC (permalink / raw)
To: alsa-devel
Dear All,
I have been told I should send an email to this list from this
bug<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5367>
(0005367).
There is a regression in ALSA 1.0.23 and above for Lenovo sound. The
internal mic no longer works. A helpful guy 'Raymond' on the bug identified
that pin-ctls is correct in ALSA 1.0.21 and 1.0.22, but incorrect in higher
versions due to SND_PCI_QUIRK_VENDOR. This is based on alsa-info.sh run on
systems using different versions of ALSA but on the same system.
The jacksense has never actually worked but I have always managed to use
hda-verb to do this for me - the main issue is the regression with the
internal mic.
Regards
Andrew
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-23 15:58 Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic Roo - Andrew Baines
@ 2011-05-23 16:14 ` Takashi Iwai
2011-05-23 17:07 ` Roo - Andrew Baines
0 siblings, 1 reply; 14+ messages in thread
From: Takashi Iwai @ 2011-05-23 16:14 UTC (permalink / raw)
To: Roo - Andrew Baines; +Cc: alsa-devel
At Mon, 23 May 2011 16:58:39 +0100,
Roo - Andrew Baines wrote:
>
> Dear All,
>
> I have been told I should send an email to this list from this
> bug<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5367>
> (0005367).
>
> There is a regression in ALSA 1.0.23 and above for Lenovo sound. The
> internal mic no longer works. A helpful guy 'Raymond' on the bug identified
> that pin-ctls is correct in ALSA 1.0.21 and 1.0.22, but incorrect in higher
> versions due to SND_PCI_QUIRK_VENDOR. This is based on alsa-info.sh run on
> systems using different versions of ALSA but on the same system.
>
> The jacksense has never actually worked but I have always managed to use
> hda-verb to do this for me - the main issue is the regression with the
> internal mic.
Try the latest alsa-driver snapshot from
ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
and pass model=auto. If this doesn't work, please give alsa-info.sh
output at this state.
thanks,
Takashi
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-23 16:14 ` Takashi Iwai
@ 2011-05-23 17:07 ` Roo - Andrew Baines
2011-05-23 19:23 ` Takashi Iwai
0 siblings, 1 reply; 14+ messages in thread
From: Roo - Andrew Baines @ 2011-05-23 17:07 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 1896 bytes --]
I have tried the latest snapshot, and placed "options snd-hda-intel
model=auto" in /etc/modprobe.d/alsa-base.conf
Still no sound into the mic, although sometimes when I open "PulseAudio
Volume Meter (Capture)" it now shows a lot of noise for about half a second
before nothing.
Also, I used to have to put "/usr/local/bin/hda-verb /dev/snd/hwC0D0 0x19
SET_PIN_WIDGET_CONTROL 0x40" in /etc/rc.local to turn on the headphone
socket at boot, but this happens by itself now. The problem is that the
daemon "pinsensed<http://ubuntuforums.org/showpost.php?p=9599525&postcount=152>"
I was using no longer mutes the speakers when the headphones are plugged in.
I have attached the new alsa-info.sh output (I hope attachments are allowed
on the mailing list)
Thanks
Andrew
On 23 May 2011 17:14, Takashi Iwai <tiwai@suse.de> wrote:
> At Mon, 23 May 2011 16:58:39 +0100,
> Roo - Andrew Baines wrote:
> >
> > Dear All,
> >
> > I have been told I should send an email to this list from this
> > bug<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5367>
> > (0005367).
> >
> > There is a regression in ALSA 1.0.23 and above for Lenovo sound. The
> > internal mic no longer works. A helpful guy 'Raymond' on the bug
> identified
> > that pin-ctls is correct in ALSA 1.0.21 and 1.0.22, but incorrect in
> higher
> > versions due to SND_PCI_QUIRK_VENDOR. This is based on alsa-info.sh run
> on
> > systems using different versions of ALSA but on the same system.
> >
> > The jacksense has never actually worked but I have always managed to use
> > hda-verb to do this for me - the main issue is the regression with the
> > internal mic.
>
> Try the latest alsa-driver snapshot from
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
>
> and pass model=auto. If this doesn't work, please give alsa-info.sh
> output at this state.
>
>
> thanks,
>
> Takashi
>
[-- Attachment #2: alsa-info.txt.AU7uf2wPsZ --]
[-- Type: application/octet-stream, Size: 18603 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Mon May 23 16:58:33 UTC 2011
!!Linux Distribution
!!------------------
Linux Mint Xfce Edition \n \l DISTRIB_ID=LinuxMint DISTRIB_CODENAME=debian DISTRIB_DESCRIPTION="Linux Mint Xfce Edition"
!!DMI Information
!!---------------
Manufacturer: LENOVO
Product Name: 0873
Product Version: Lenovo G555
!!Kernel Information
!!------------------
Kernel release: 2.6.38-2-amd64
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.24
Library version: 1.0.24.1
Utilities version: 1.0.24.2
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0x92400000 irq 16
!!PCI Soundcards installed in the system
!!--------------------------------------
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!--------------------------------------------------------
00:14.2 0403: 1002:4383
Subsystem: 17aa:3938
!!Modprobe options (Sound related)
!!--------------------------------
snd-hda-intel: model=auto
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : auto,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 10
power_save_controller : N
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Conexant CX20585
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x14f15069
Subsystem Id: 0x17aac007
Revision Id: 0x100302
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x3f 0x3f]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x3f 0x3f]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4d 0x4d] [0x80 0x80] [0x4d 0x4d] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x04 0x04]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x022110f0: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=37, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11*
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x95a701f0: [Fixed] Mic at Int Top
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x02a110f0: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=38, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x921701f0: [Fixed] Speaker at Int Front
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0
Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [SB]
Card hw:0 'SB'/'HDA ATI SB at 0x92400000 irq 16'
Mixer name : 'Conexant CX20585'
Components : 'HDA:14f15069,17aac007,00100302'
Controls : 13
Simple ctrls : 8
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 74
Mono: Playback 63 [85%] [-11.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 74
Mono:
Front Left: Playback 74 [100%] [0.00dB] [on]
Front Right: Playback 74 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 74
Mono:
Front Left: Playback 74 [100%] [0.00dB] [on]
Front Right: Playback 74 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 252 [99%] [0.60dB]
Front Right: Playback 252 [99%] [0.60dB]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 7
Mono: Playback 0 [0%] [-28.00dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 80
Front Left: Capture 77 [96%] [3.00dB] [on]
Front Right: Capture 77 [96%] [3.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 4
Front Left: 4 [100%] [40.00dB]
Front Right: 4 [100%] [40.00dB]
!!Alsactl output
!!-------------
--startcollapse--
state.SB {
control.1 {
iface MIXER
name 'Speaker Playback Volume'
value.0 74
value.1 74
comment {
access 'read write'
type INTEGER
count 2
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Headphone Playback Volume'
value.0 74
value.1 74
comment {
access 'read write'
type INTEGER
count 2
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.4 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.6 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 4
value.1 4
comment {
access 'read write'
type INTEGER
count 2
range '0 - 4'
dbmin 0
dbmax 4000
dbvalue.0 4000
dbvalue.1 4000
}
}
control.7 {
iface MIXER
name 'Capture Volume'
value.0 77
value.1 77
comment {
access 'read write'
type INTEGER
count 2
range '0 - 80'
dbmin -7400
dbmax 600
dbvalue.0 300
dbvalue.1 300
}
}
control.8 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.9 {
iface MIXER
name 'Master Playback Volume'
value 63
comment {
access 'read write'
type INTEGER
count 1
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 -1100
}
}
control.10 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.11 {
iface MIXER
name 'Beep Playback Volume'
value 0
comment {
access 'read write'
type INTEGER
count 1
range '0 - 7'
dbmin -2800
dbmax 0
dbvalue.0 -2800
}
}
control.12 {
iface MIXER
name 'Beep Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.13 {
iface MIXER
name 'PCM Playback Volume'
value.0 252
value.1 252
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -60
dbvalue.1 -60
}
}
}
--endcollapse--
!!ALSA configuration files
!!------------------------
!!System wide config file (/etc/asound.conf)
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
}
ctl.!default {
type pulse
}
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 5 May 23 17:55 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 4 May 23 17:55 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 3 May 23 17:57 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 2 May 23 17:58 /dev/snd/pcmC0D0p
crw------- 1 root root 116, 1 May 23 17:55 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 May 23 17:55 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 May 23 17:55 .
drwxr-xr-x 3 root root 180 May 23 17:55 ..
lrwxrwxrwx 1 root root 12 May 23 17:55 pci-0000:00:14.2 -> ../controlC0
!!ALSA/HDA dmesg
!!------------------
[ 38.198903] [drm] Loading RS780 Microcode
[ 38.454532] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 38.454573] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 38.484262] ALSA hda_intel.c:1463: Enable sync_write for AMD chipset
[ 38.613501] radeon 0000:01:05.0: WB enabled
--
[ 38.646724] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 38.648238] hda_codec: CX20585: BIOS auto-probing.
[ 38.648977] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 38.710023] [drm] radeon: power management initialized
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-23 17:07 ` Roo - Andrew Baines
@ 2011-05-23 19:23 ` Takashi Iwai
2011-05-23 22:24 ` Roo - Andrew Baines
0 siblings, 1 reply; 14+ messages in thread
From: Takashi Iwai @ 2011-05-23 19:23 UTC (permalink / raw)
To: Roo - Andrew Baines; +Cc: alsa-devel
At Mon, 23 May 2011 18:07:09 +0100,
Roo - Andrew Baines wrote:
>
> I have tried the latest snapshot, and placed "options snd-hda-intel
> model=auto" in /etc/modprobe.d/alsa-base.conf
>
> Still no sound into the mic, although sometimes when I open "PulseAudio
> Volume Meter (Capture)" it now shows a lot of noise for about half a second
> before nothing.
>
> Also, I used to have to put "/usr/local/bin/hda-verb /dev/snd/hwC0D0 0x19
> SET_PIN_WIDGET_CONTROL 0x40" in /etc/rc.local to turn on the headphone
> socket at boot, but this happens by itself now. The problem is that the
> daemon "pinsensed<http://ubuntuforums.org/showpost.php?p=9599525&postcount=152>"
> I was using no longer mutes the speakers when the headphones are plugged in.
The driver should do auto-muting without such a daemon. If it still
doesn't, check whether the unsolicited event is triggered at plugging
by adding some debug prints.
> I have attached the new alsa-info.sh output (I hope attachments are allowed
> on the mailing list)
I fixed a couple of obvious bugs now.
Please try alsa-driver snapshot again later with model=auto.
thanks,
Takashi
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-23 19:23 ` Takashi Iwai
@ 2011-05-23 22:24 ` Roo - Andrew Baines
2011-05-24 9:38 ` Takashi Iwai
0 siblings, 1 reply; 14+ messages in thread
From: Roo - Andrew Baines @ 2011-05-23 22:24 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 1678 bytes --]
With the latest snapshot, the mic does not work still.
What has also changed from the previous snapshot provided is that when the
headphones are plugged in, no sound comes through the headphones, but still
through the speakers - before it came through both.
I have attached a verbose pulse log of about 15 seconds when i plugged in
and unplugged my headphones - I couldnt work out how to do an ALSA one.
Thanks
Andrew
On 23 May 2011 20:23, Takashi Iwai <tiwai@suse.de> wrote:
> At Mon, 23 May 2011 18:07:09 +0100,
> Roo - Andrew Baines wrote:
> >
> > I have tried the latest snapshot, and placed "options snd-hda-intel
> > model=auto" in /etc/modprobe.d/alsa-base.conf
> >
> > Still no sound into the mic, although sometimes when I open "PulseAudio
> > Volume Meter (Capture)" it now shows a lot of noise for about half a
> second
> > before nothing.
> >
> > Also, I used to have to put "/usr/local/bin/hda-verb /dev/snd/hwC0D0 0x19
> > SET_PIN_WIDGET_CONTROL 0x40" in /etc/rc.local to turn on the headphone
> > socket at boot, but this happens by itself now. The problem is that the
> > daemon "pinsensed<
> http://ubuntuforums.org/showpost.php?p=9599525&postcount=152>"
> > I was using no longer mutes the speakers when the headphones are plugged
> in.
>
> The driver should do auto-muting without such a daemon. If it still
> doesn't, check whether the unsolicited event is triggered at plugging
> by adding some debug prints.
>
> > I have attached the new alsa-info.sh output (I hope attachments are
> allowed
> > on the mailing list)
>
> I fixed a couple of obvious bugs now.
> Please try alsa-driver snapshot again later with model=auto.
>
>
> thanks,
>
> Takashi
>
[-- Attachment #2: pulseverbose.log --]
[-- Type: text/x-log, Size: 71638 bytes --]
I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: core-rtclock.c: Timer slack is set to 50 us.
I: core-util.c: Failed to acquire high-priority scheduling: No such file or directory
I: main.c: This is PulseAudio 0.9.21
D: main.c: Compilation host: x86_64-pc-linux-gnu
D: main.c: Compilation CFLAGS: -g -O2 -g -O2 -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: main.c: Running on host: Linux x86_64 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011
D: main.c: Found 2 CPUs.
I: main.c: Page size is 4096 bytes
D: main.c: Compiled with Valgrind support: no
D: main.c: Running in valgrind mode: no
D: main.c: Running in VM: no
D: main.c: Optimized build: yes
D: main.c: All asserts enabled.
I: main.c: Machine ID is 3c57545fd9007fcac1f08fcd00001118.
I: main.c: Session ID is 3c57545fd9007fcac1f08fcd00001118-1306187088.342412-698426490.
I: main.c: Using runtime directory /home/roo/.pulse/3c57545fd9007fcac1f08fcd00001118-runtime.
I: main.c: Using state directory /home/roo/.pulse.
I: main.c: Using modules directory /usr/lib/pulse-0.9.21/modules.
I: main.c: Running in system mode: no
I: main.c: Fresh high-resolution timers available! Bon appetit!
I: cpu-x86.c: CPU flags: MMX SSE SSE2 SSE3 MMXEXT 3DNOW 3DNOWEXT
I: svolume_mmx.c: Initialising MMX optimized functions.
I: remap_mmx.c: Initialising MMX optimized remappers.
I: svolume_sse.c: Initialising SSE2 optimized functions.
I: remap_sse.c: Initialising SSE2 optimized remappers.
I: sconv_sse.c: Initialising SSE2 optimized conversions.
D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
D: database-gdbm.c: Opened GDBM database '/home/roo/.pulse/3c57545fd9007fcac1f08fcd00001118-device-volumes.x86_64-pc-linux-gnu.gdbm'
I: module-device-restore.c: Sucessfully opened database file '/home/roo/.pulse/3c57545fd9007fcac1f08fcd00001118-device-volumes'.
I: module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: database-gdbm.c: Opened GDBM database '/home/roo/.pulse/3c57545fd9007fcac1f08fcd00001118-stream-volumes.x86_64-pc-linux-gnu.gdbm'
I: module-stream-restore.c: Sucessfully opened database file '/home/roo/.pulse/3c57545fd9007fcac1f08fcd00001118-stream-volumes'.
I: module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: database-gdbm.c: Opened GDBM database '/home/roo/.pulse/3c57545fd9007fcac1f08fcd00001118-card-database.x86_64-pc-linux-gnu.gdbm'
I: module-card-restore.c: Sucessfully opened database file '/home/roo/.pulse/3c57545fd9007fcac1f08fcd00001118-card-database'.
I: module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: module.c: Loaded "module-augment-properties" (index: #3; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-udev-detect.so': success
D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card0 is busy: no
D: module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1"'
D: dbus-util.c: Successfully connected to D-Bus session bus b338f04d9e671ce6c3b7994000000034 as :1.69
D: reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
D: alsa-mixer.c: Looking at profile output:analog-mono
D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-mono+input:analog-mono
D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-mono+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-mono+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-mono+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-stereo
D: alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 371 ms
D: alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: alsa-mixer.c: Profile output:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 371 ms
D: alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:analog-stereo+input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-stereo+input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-40
D: alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:analog-mono
D: alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround40:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-41
D: alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround41:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround41:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:analog-mono
D: alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround41:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround41:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround41:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround41:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround41:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround41:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround41:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround41:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-50
D: alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround50:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround50:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:analog-mono
D: alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround50:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround50:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround50:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround50:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround50:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround50:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround50:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
D: alsa-util.c: Trying plug:surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround50:0
I: (alsa-lib)pcm_params.c: Slave PCM not usable
D: alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-51
D: alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying plug:surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying plug:surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:analog-mono
D: alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying plug:surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying plug:surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying plug:surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying plug:surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying plug:surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying plug:surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying plug:surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
D: alsa-util.c: Trying plug:surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround51:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-71
D: alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying plug:surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying plug:surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:analog-mono
D: alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying plug:surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying plug:surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying plug:surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying plug:surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying plug:surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying plug:surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying plug:surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
D: alsa-util.c: Trying plug:surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:surround71:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:iec958-stereo
D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-mono
D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:analog-mono
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:analog-mono
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:analog-mono
D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:hdmi-stereo
D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-mono
D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D3p' failed (-2)
I: alsa-util.c: Error opening PCM device hdmi:0: No such file or directory
D: alsa-mixer.c: Looking at profile input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 371 ms
D: alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: alsa-mixer.c: Profile input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: module-card-restore.c: Restoring profile for card alsa_card.pci-0000_00_14.2.
I: card.c: Created 0 "alsa_card.pci-0000_00_14.2"
D: reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio0'
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 371 ms
D: alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
I: alsa-sink.c: Successfully opened device front:0.
I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: alsa-sink.c: Successfully enabled mmap() mode.
I: alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: (alsa-lib)control.c: Invalid CTL front:0
I: alsa-mixer.c: Unable to attach to mixer front:0: No such file or directory
I: alsa-mixer.c: Successfully attached to mixer 'hw:0'
D: alsa-mixer.c: Probing path 'analog-output'
D: alsa-mixer.c: Probing path 'analog-output-speaker'
D: alsa-mixer.c: Probe of element 'Speaker' failed.
D: alsa-mixer.c: Probing path 'analog-output-headphones'
D: alsa-mixer.c: Probe of element 'Headphone' failed.
D: alsa-mixer.c: Probing path 'analog-output-headphones-2'
D: alsa-mixer.c: Probe of element 'Headphone2' failed.
D: alsa-mixer.c: Probing path 'analog-output-mono'
D: alsa-mixer.c: Probe of element 'Master Mono' failed.
D: alsa-mixer.c: Probing path 'analog-output-lfe-on-mono'
D: alsa-mixer.c: Probe of element 'Master Mono' failed.
D: alsa-sink.c: Probed mixer paths:
D: alsa-mixer.c: Path Set 0x68a5a0, direction=1, probed=yes
D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=74, min_dB=-125, max_dB=0
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
I: module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_14.2.analog-stereo.
I: module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_00_14.2.analog-stereo.
I: sink.c: Created sink 0 "alsa_output.pci-0000_00_14.2.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: sink.c: alsa.resolution_bits = "16"
I: sink.c: device.api = "alsa"
I: sink.c: device.class = "sound"
I: sink.c: alsa.class = "generic"
I: sink.c: alsa.subclass = "generic-mix"
I: sink.c: alsa.name = "CONEXANT Analog"
I: sink.c: alsa.id = "CONEXANT Analog"
I: sink.c: alsa.subdevice = "0"
I: sink.c: alsa.subdevice_name = "subdevice #0"
I: sink.c: alsa.device = "0"
I: sink.c: alsa.card = "0"
I: sink.c: alsa.card_name = "HDA ATI SB"
I: sink.c: alsa.long_card_name = "HDA ATI SB at 0x92400000 irq 16"
I: sink.c: alsa.driver_name = "snd_hda_intel"
I: sink.c: device.bus_path = "pci-0000:00:14.2"
I: sink.c: sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
I: sink.c: device.bus = "pci"
I: sink.c: device.vendor.id = "1002"
I: sink.c: device.vendor.name = "ATI Technologies Inc"
I: sink.c: device.product.id = "4383"
I: sink.c: device.product.name = "SBx00 Azalia (Intel HDA)"
I: sink.c: device.form_factor = "internal"
I: sink.c: device.string = "front:0"
I: sink.c: device.buffering.buffer_size = "65536"
I: sink.c: device.buffering.fragment_size = "32768"
I: sink.c: device.access_mode = "mmap+timer"
I: sink.c: device.profile.name = "analog-stereo"
I: sink.c: device.profile.description = "Analog Stereo"
I: sink.c: device.description = "Internal Audio Analog Stereo"
I: sink.c: alsa.mixer_name = "Conexant CX20585"
I: sink.c: alsa.components = "HDA:14f15069,17aac007,00100302"
I: sink.c: module-udev-detect.discovered = "1"
I: sink.c: device.icon_name = "audio-card-pci"
D: core-subscribe.c: Dropped redundant event due to change event.
I: source.c: Created source 0 "alsa_output.pci-0000_00_14.2.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: source.c: device.description = "Monitor of Internal Audio Analog Stereo"
I: source.c: device.class = "monitor"
I: source.c: alsa.card = "0"
I: source.c: alsa.card_name = "HDA ATI SB"
I: source.c: alsa.long_card_name = "HDA ATI SB at 0x92400000 irq 16"
I: source.c: alsa.driver_name = "snd_hda_intel"
I: source.c: device.bus_path = "pci-0000:00:14.2"
I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
I: source.c: device.bus = "pci"
I: source.c: device.vendor.id = "1002"
I: source.c: device.vendor.name = "ATI Technologies Inc"
I: source.c: device.product.id = "4383"
I: source.c: device.product.name = "SBx00 Azalia (Intel HDA)"
I: source.c: device.form_factor = "internal"
I: source.c: device.string = "0"
I: source.c: module-udev-detect.discovered = "1"
I: source.c: device.icon_name = "audio-card-pci"
I: alsa-sink.c: Using 2.0 fragments of size 32768 bytes (185.76ms), buffer size is 65536 bytes (371.52ms)
I: alsa-sink.c: Time scheduling watermark is 20.00ms
D: alsa-sink.c: hwbuf_unused=0
D: alsa-sink.c: setting avail_min=15502
D: alsa-mixer.c: Activating path analog-output
D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=74, min_dB=-125, max_dB=0
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
I: alsa-sink.c: Hardware volume ranges from -125.00 dB to 0.00 dB.
I: alsa-sink.c: No particular base volume set, fixing to 0 dB
I: alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: alsa-sink.c: Using hardware mute control.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Soft volume PCM
D: alsa-util.c: Control: PCM Playback Volume
D: alsa-util.c: min_dB: -51
D: alsa-util.c: max_dB: 0
D: alsa-util.c: resolution: 256
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 4611686018427387904
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 4611686018427387904
D: alsa-util.c: Slave: Hardware PCM card 0 'HDA ATI SB' device 0 subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : PLAYBACK
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 4611686018427387904
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 4611686018427387904
D: alsa-util.c: appl_ptr : 0
D: alsa-util.c: hw_ptr : 0
D: alsa-sink.c: Requested volume: 0: 98% 1: 98%
D: alsa-sink.c: Got hardware volume: 0: 99% 1: 99%
D: alsa-sink.c: Calculated software volume: 0: 99% 1: 99% (accurate-enough=yes)
D: alsa-sink.c: Thread starting up
I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 4, which is lower than the requested 5.
I: alsa-sink.c: Starting playback.
D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 371 ms
D: alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
I: alsa-source.c: Successfully opened device front:0.
I: alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: alsa-source.c: Successfully enabled mmap() mode.
I: alsa-source.c: Successfully enabled timer-based scheduling mode.
I: (alsa-lib)control.c: Invalid CTL front:0
I: alsa-mixer.c: Unable to attach to mixer front:0: No such file or directory
I: alsa-mixer.c: Successfully attached to mixer 'hw:0'
D: alsa-mixer.c: Probing path 'analog-input'
D: alsa-mixer.c: Probing path 'analog-input-microphone'
D: alsa-mixer.c: Probe of element 'Mic' failed.
D: alsa-mixer.c: Probing path 'analog-input-linein'
D: alsa-mixer.c: Probe of element 'Line' failed.
D: alsa-mixer.c: Probing path 'analog-input'
D: alsa-mixer.c: Probe of element 'Aux' failed.
D: alsa-mixer.c: Probing path 'analog-input-video'
D: alsa-mixer.c: Probe of element 'Video' failed.
D: alsa-mixer.c: Probing path 'analog-input-video'
D: alsa-mixer.c: Probe of element 'TV Tuner' failed.
D: alsa-mixer.c: Probing path 'analog-input-radio'
D: alsa-mixer.c: Probe of element 'FM' failed.
D: alsa-mixer.c: Probing path 'analog-input'
D: alsa-mixer.c: Probe of element 'Mic/Line' failed.
D: alsa-source.c: Probed mixer paths:
D: alsa-mixer.c: Path Set 0x6a60a0, direction=2, probed=yes
D: alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=80, min_dB=-74, max_dB=6
D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, enumeration=0, required=2, required_absent=0, mask=0x401b600000000f66, n_channels=2, override_map=yes
D: core-subscribe.c: Dropped redundant event due to change event.
I: module-device-restore.c: Restoring volume for source alsa_input.pci-0000_00_14.2.analog-stereo.
I: source.c: Created source 1 "alsa_input.pci-0000_00_14.2.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: source.c: alsa.resolution_bits = "16"
I: source.c: device.api = "alsa"
I: source.c: device.class = "sound"
I: source.c: alsa.class = "generic"
I: source.c: alsa.subclass = "generic-mix"
I: source.c: alsa.name = "CONEXANT Analog"
I: source.c: alsa.id = "CONEXANT Analog"
I: source.c: alsa.subdevice = "0"
I: source.c: alsa.subdevice_name = "subdevice #0"
I: source.c: alsa.device = "0"
I: source.c: alsa.card = "0"
I: source.c: alsa.card_name = "HDA ATI SB"
I: source.c: alsa.long_card_name = "HDA ATI SB at 0x92400000 irq 16"
I: source.c: alsa.driver_name = "snd_hda_intel"
I: source.c: device.bus_path = "pci-0000:00:14.2"
I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
I: source.c: device.bus = "pci"
I: source.c: device.vendor.id = "1002"
I: source.c: device.vendor.name = "ATI Technologies Inc"
I: source.c: device.product.id = "4383"
I: source.c: device.product.name = "SBx00 Azalia (Intel HDA)"
I: source.c: device.form_factor = "internal"
I: source.c: device.string = "front:0"
I: source.c: device.buffering.buffer_size = "65536"
I: source.c: device.buffering.fragment_size = "32768"
I: source.c: device.access_mode = "mmap+timer"
I: source.c: device.profile.name = "analog-stereo"
I: source.c: device.profile.description = "Analog Stereo"
I: source.c: device.description = "Internal Audio Analog Stereo"
I: source.c: alsa.mixer_name = "Conexant CX20585"
I: source.c: alsa.components = "HDA:14f15069,17aac007,00100302"
I: source.c: module-udev-detect.discovered = "1"
I: source.c: device.icon_name = "audio-card-pci"
I: alsa-source.c: Using 2.0 fragments of size 32768 bytes (185.76ms), buffer size is 65536 bytes (371.52ms)
I: alsa-source.c: Time scheduling watermark is 20.00ms
D: alsa-source.c: hwbuf_unused=0
D: alsa-source.c: setting avail_min=15502
D: alsa-mixer.c: Activating path analog-input
D: alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=80, min_dB=-74, max_dB=6
D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, enumeration=0, required=2, required_absent=0, mask=0x401b600000000f66, n_channels=2, override_map=yes
I: alsa-source.c: Hardware volume ranges from -74.00 dB to 6.00 dB.
I: alsa-source.c: Fixing base volume to -6.00 dB
I: alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: alsa-source.c: Using hardware mute control.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Soft volume PCM
D: alsa-util.c: Control: PCM Playback Volume
D: alsa-util.c: min_dB: -51
D: alsa-util.c: max_dB: 0
D: alsa-util.c: resolution: 256
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : CAPTURE
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 4611686018427387904
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 4611686018427387904
D: alsa-util.c: Slave: Hardware PCM card 0 'HDA ATI SB' device 0 subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c: stream : CAPTURE
D: alsa-util.c: access : MMAP_INTERLEAVED
D: alsa-util.c: format : S16_LE
D: alsa-util.c: subformat : STD
D: alsa-util.c: channels : 2
D: alsa-util.c: rate : 44100
D: alsa-util.c: exact rate : 44100 (44100/1)
D: alsa-util.c: msbits : 16
D: alsa-util.c: buffer_size : 16384
D: alsa-util.c: period_size : 8192
D: alsa-util.c: period_time : 185759
D: alsa-util.c: tstamp_mode : ENABLE
D: alsa-util.c: period_step : 1
D: alsa-util.c: avail_min : 15502
D: alsa-util.c: period_event : 0
D: alsa-util.c: start_threshold : -1
D: alsa-util.c: stop_threshold : 4611686018427387904
D: alsa-util.c: silence_threshold: 0
D: alsa-util.c: silence_size : 0
D: alsa-util.c: boundary : 4611686018427387904
D: alsa-util.c: appl_ptr : 0
D: alsa-util.c: hw_ptr : 0
D: alsa-source.c: Requested volume: 0: 88% 1: 88%
D: alsa-source.c: Got hardware volume: 0: 89% 1: 89%
D: alsa-source.c: Calculated software volume: 0: 99% 1: 99% (accurate-enough=yes)
D: alsa-source.c: Thread starting up
I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 4, which is lower than the requested 5.
I: module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1"").
I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:14.2/sound/card0 (alsa_card.pci-0000_00_14.2) module loaded.
I: module-udev-detect.c: Found 1 cards.
I: module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-bluetooth-discover.so': failure
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-esound-protocol-unix.so': success
I: module.c: Loaded "module-esound-protocol-unix" (index: #6; argument: "").
I: module.c: Loaded "module-native-protocol-unix" (index: #7; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-gconf.so': success
I: module.c: Loaded "module-gconf" (index: #8; argument: "").
D: core-subscribe.c: Dropped redundant event due to change event.
I: module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_00_14.2.analog-stereo'.
D: core-subscribe.c: Dropped redundant event due to change event.
I: module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_00_14.2.analog-stereo'.
I: module.c: Loaded "module-default-device-restore" (index: #9; argument: "").
I: module.c: Loaded "module-rescue-streams" (index: #10; argument: "").
I: module.c: Loaded "module-always-sink" (index: #11; argument: "").
I: module.c: Loaded "module-intended-roles" (index: #12; argument: "").
D: module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
D: module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
I: module.c: Loaded "module-suspend-on-idle" (index: #13; argument: "").
D: dbus-util.c: Successfully connected to D-Bus system bus f875e51f846c7e15fc71152f0000001b as :1.47
I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2"
D: module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session2
I: module.c: Loaded "module-console-kit" (index: #14; argument: "").
I: module.c: Loaded "module-position-event-sounds" (index: #15; argument: "").
D: main.c: Got org.pulseaudio.Server!
I: main.c: Daemon startup complete.
D: module-console-kit.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
I: module-suspend-on-idle.c: Source alsa_input.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
D: source.c: Suspend cause of source alsa_input.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
I: alsa-source.c: Device suspended...
I: module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo idle for too long, suspending ...
D: sink.c: Suspend cause of sink alsa_output.pci-0000_00_14.2.analog-stereo is 0x0004, suspending
I: alsa-sink.c: Device suspended...
D: reserve-wrap.c: Device lock status of reserve-monitor-wrapper@Audio0 changed: not busy
D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
I: main.c: Got signal SIGUSR2.
I: module.c: Loaded "module-cli-protocol-unix" (index: #16; argument: "").
I: client.c: Created 1 "UNIX socket client"
( 0.000| 0.000) D: cli.c: CLI got EOF from user.
( 0.000| 0.000) I: client.c: Freed 1 "UNIX socket client"
( 31.600| 31.600) I: main.c: Got signal SIGINT.
( 31.600| 0.000) I: main.c: Exiting.
( 31.600| 0.000) I: main.c: Daemon shutdown initiated.
( 31.600| 0.000) I: module.c: Unloading "module-device-restore" (index: #0).
( 31.601| 0.000) I: module.c: Unloaded "module-device-restore" (index: #0).
( 31.601| 0.000) I: module.c: Unloading "module-stream-restore" (index: #1).
( 31.602| 0.001) I: module.c: Unloaded "module-stream-restore" (index: #1).
( 31.602| 0.000) I: module.c: Unloading "module-card-restore" (index: #2).
( 31.603| 0.000) I: module.c: Unloaded "module-card-restore" (index: #2).
( 31.603| 0.000) I: module.c: Unloading "module-augment-properties" (index: #3).
( 31.603| 0.000) I: module.c: Unloaded "module-augment-properties" (index: #3).
( 31.603| 0.000) I: module.c: Unloading "module-alsa-card" (index: #4).
( 31.604| 0.000) D: alsa-sink.c: Thread shutting down
( 31.604| 0.000) I: sink.c: Freeing sink 0 "alsa_output.pci-0000_00_14.2.analog-stereo"
( 31.604| 0.000) I: source.c: Freeing source 0 "alsa_output.pci-0000_00_14.2.analog-stereo.monitor"
( 31.604| 0.000) D: core-subscribe.c: Dropped redundant event due to change event.
( 31.605| 0.000) D: alsa-source.c: Thread shutting down
( 31.605| 0.000) I: source.c: Freeing source 1 "alsa_input.pci-0000_00_14.2.analog-stereo"
( 31.605| 0.000) I: card.c: Freed 0 "alsa_card.pci-0000_00_14.2"
( 31.607| 0.001) I: module.c: Unloaded "module-alsa-card" (index: #4).
( 31.607| 0.000) I: module.c: Unloading "module-udev-detect" (index: #5).
( 31.640| 0.032) I: module.c: Unloaded "module-udev-detect" (index: #5).
( 31.640| 0.000) I: module.c: Unloading "module-esound-protocol-unix" (index: #6).
( 31.640| 0.000) I: module.c: Unloaded "module-esound-protocol-unix" (index: #6).
( 31.640| 0.000) I: module.c: Unloading "module-native-protocol-unix" (index: #7).
( 31.641| 0.000) I: module.c: Unloaded "module-native-protocol-unix" (index: #7).
( 31.641| 0.000) I: module.c: Unloading "module-gconf" (index: #8).
( 31.641| 0.000) I: module.c: Unloaded "module-gconf" (index: #8).
( 31.641| 0.000) I: module.c: Unloading "module-default-device-restore" (index: #9).
( 31.641| 0.000) I: module.c: Unloaded "module-default-device-restore" (index: #9).
( 31.641| 0.000) I: module.c: Unloading "module-rescue-streams" (index: #10).
( 31.641| 0.000) I: module.c: Unloaded "module-rescue-streams" (index: #10).
( 31.641| 0.000) I: module.c: Unloading "module-always-sink" (index: #11).
( 31.641| 0.000) I: module.c: Unloaded "module-always-sink" (index: #11).
( 31.641| 0.000) I: module.c: Unloading "module-intended-roles" (index: #12).
( 31.641| 0.000) I: module.c: Unloaded "module-intended-roles" (index: #12).
( 31.641| 0.000) I: module.c: Unloading "module-suspend-on-idle" (index: #13).
( 31.642| 0.000) I: module.c: Unloaded "module-suspend-on-idle" (index: #13).
( 31.642| 0.000) I: module.c: Unloading "module-console-kit" (index: #14).
( 31.642| 0.000) D: module-console-kit.c: Removing session /org/freedesktop/ConsoleKit/Session2
( 31.642| 0.000) I: client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2"
( 31.643| 0.001) I: module.c: Unloaded "module-console-kit" (index: #14).
( 31.643| 0.000) I: module.c: Unloading "module-position-event-sounds" (index: #15).
( 31.643| 0.000) I: module.c: Unloaded "module-position-event-sounds" (index: #15).
( 31.643| 0.000) I: module.c: Unloading "module-cli-protocol-unix" (index: #16).
( 31.645| 0.001) I: module.c: Unloaded "module-cli-protocol-unix" (index: #16).
( 31.645| 0.000) I: main.c: Daemon terminated.
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-23 22:24 ` Roo - Andrew Baines
@ 2011-05-24 9:38 ` Takashi Iwai
2011-05-24 10:57 ` Roo - Andrew Baines
0 siblings, 1 reply; 14+ messages in thread
From: Takashi Iwai @ 2011-05-24 9:38 UTC (permalink / raw)
To: Roo - Andrew Baines; +Cc: alsa-devel
At Mon, 23 May 2011 23:24:48 +0100,
Roo - Andrew Baines wrote:
>
> With the latest snapshot, the mic does not work still.
Hrm OK, could you give alsa-info.sh output again?
> What has also changed from the previous snapshot provided is that when the
> headphones are plugged in, no sound comes through the headphones, but still
> through the speakers - before it came through both.
Weird, there is no change regarding this since the last time.
It looks like something is unstable with jack-sensing.
> I have attached a verbose pulse log of about 15 seconds when i plugged in
> and unplugged my headphones - I couldnt work out how to do an ALSA one.
Don't use PulseAudio for the primary testing. Use alsa-native, e.g.
"arecord -Dplughw -vv foo.wav". You can avoid PA by wrapping with
pasuspender.
% pasuspender arecord -Dplughw -vv foo.wav
Also, try the patch below on alsa-driver/alsa-kernel directory with
patch -p2 option. This will give a few debug prints. See "XXX ..."
kernel messages at initialization and upon plugging/unplugging HP/mic
jacks.
thanks,
Takashi
---
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index e8dc736..1095bbb 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3484,11 +3484,16 @@ static void cx_auto_update_speakers(struct hda_codec *codec)
struct auto_pin_cfg *cfg = &spec->autocfg;
int on;
+ printk("XXX cx_auto_update_speakers: auto_mute=%d, hp_present=%d, line_present=%d\n", spec->auto_mute, spec->hp_present, spec->line_present);
if (!spec->auto_mute)
- on = 0;
+ on = 1;
else
- on = spec->hp_present | spec->line_present;
+ on = spec->hp_present;
cx_auto_turn_eapd(codec, cfg->hp_outs, cfg->hp_pins, on);
+ if (!spec->auto_mute)
+ on = 0;
+ else
+ on |= spec->detect_line && spec->line_present;
do_automute(codec, cfg->speaker_outs, cfg->speaker_pins, !on);
/* toggle line-out mutes if needed, too */
@@ -3508,6 +3513,7 @@ static void cx_auto_hp_automute(struct hda_codec *codec)
struct conexant_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
+ printk("XXX cx_auto_hp_automute\n");
if (!spec->auto_mute)
return;
spec->hp_present = detect_jacks(codec, cfg->hp_outs, cfg->hp_pins);
@@ -3519,6 +3525,7 @@ static void cx_auto_line_automute(struct hda_codec *codec)
struct conexant_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
+ printk("XXX cx_auto_line_automute\n");
if (!spec->auto_mute || !spec->detect_line)
return;
spec->line_present = detect_jacks(codec, cfg->line_outs,
@@ -3703,6 +3710,8 @@ static int cx_auto_mux_enum_update(struct hda_codec *codec,
return 0;
if (idx >= imux->num_items)
idx = imux->num_items - 1;
+ printk("XXX cx_auto_mux_enum_update idx=%d, adc=%x, pin=%x\n",
+ idx, spec->imux_info[idx].adc, spec->imux_info[idx].pin);
if (spec->cur_mux[0] == idx)
changed = 0;
adc = spec->imux_info[idx].adc;
@@ -3757,6 +3766,7 @@ static void cx_auto_automic(struct hda_codec *codec)
{
struct conexant_spec *spec = codec->spec;
+ printk("XXX cx_auto_automic\n");
if (!spec->auto_mic)
return;
if (!select_automic(codec, spec->auto_mic_ext, true))
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-24 9:38 ` Takashi Iwai
@ 2011-05-24 10:57 ` Roo - Andrew Baines
2011-05-24 11:07 ` Takashi Iwai
0 siblings, 1 reply; 14+ messages in thread
From: Roo - Andrew Baines @ 2011-05-24 10:57 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 4538 bytes --]
I tried the patch but for some reason it fails, am i using patch wrong? When
I try and open it in Kompare it says its not a valid diff file.
shark alsa-kernel # patch -p2 </home/roo/alsa-patch
patching file pci/hda/patch_conexant.c
Hunk #1 FAILED at 3484.
Hunk #2 FAILED at 3508.
Hunk #3 FAILED at 3519.
Hunk #4 FAILED at 3703.
Hunk #5 FAILED at 3757.
5 out of 5 hunks FAILED -- saving rejects to file
pci/hda/patch_conexant.c.rej
New alsa-info.sh output is attached also.
When I ran arecord with pasuspender I got an error 'D is not a valid option'
so I killed pulse and did arecord. What I got was a 0.00 second long
recording even if i specified --duration=10.
There are no alsa records in /var/log/messages at all when I grep for ALSA,
alsa, conexant, snd, sound.
Thanks
Andrew
On 24 May 2011 10:38, Takashi Iwai <tiwai@suse.de> wrote:
> At Mon, 23 May 2011 23:24:48 +0100,
> Roo - Andrew Baines wrote:
> >
> > With the latest snapshot, the mic does not work still.
>
> Hrm OK, could you give alsa-info.sh output again?
>
> > What has also changed from the previous snapshot provided is that when
> the
> > headphones are plugged in, no sound comes through the headphones, but
> still
> > through the speakers - before it came through both.
>
> Weird, there is no change regarding this since the last time.
> It looks like something is unstable with jack-sensing.
>
> > I have attached a verbose pulse log of about 15 seconds when i plugged in
> > and unplugged my headphones - I couldnt work out how to do an ALSA one.
>
> Don't use PulseAudio for the primary testing. Use alsa-native, e.g.
> "arecord -Dplughw -vv foo.wav". You can avoid PA by wrapping with
> pasuspender.
>
> % pasuspender arecord -Dplughw -vv foo.wav
>
> Also, try the patch below on alsa-driver/alsa-kernel directory with
> patch -p2 option. This will give a few debug prints. See "XXX ..."
> kernel messages at initialization and upon plugging/unplugging HP/mic
> jacks.
>
>
> thanks,
>
> Takashi
>
> ---
> diff --git a/sound/pci/hda/patch_conexant.c
> b/sound/pci/hda/patch_conexant.c
> index e8dc736..1095bbb 100644
> --- a/sound/pci/hda/patch_conexant.c
> +++ b/sound/pci/hda/patch_conexant.c
> @@ -3484,11 +3484,16 @@ static void cx_auto_update_speakers(struct
> hda_codec *codec)
> struct auto_pin_cfg *cfg = &spec->autocfg;
> int on;
>
> + printk("XXX cx_auto_update_speakers: auto_mute=%d, hp_present=%d,
> line_present=%d\n", spec->auto_mute, spec->hp_present, spec->line_present);
> if (!spec->auto_mute)
> - on = 0;
> + on = 1;
> else
> - on = spec->hp_present | spec->line_present;
> + on = spec->hp_present;
> cx_auto_turn_eapd(codec, cfg->hp_outs, cfg->hp_pins, on);
> + if (!spec->auto_mute)
> + on = 0;
> + else
> + on |= spec->detect_line && spec->line_present;
> do_automute(codec, cfg->speaker_outs, cfg->speaker_pins, !on);
>
> /* toggle line-out mutes if needed, too */
> @@ -3508,6 +3513,7 @@ static void cx_auto_hp_automute(struct hda_codec
> *codec)
> struct conexant_spec *spec = codec->spec;
> struct auto_pin_cfg *cfg = &spec->autocfg;
>
> + printk("XXX cx_auto_hp_automute\n");
> if (!spec->auto_mute)
> return;
> spec->hp_present = detect_jacks(codec, cfg->hp_outs, cfg->hp_pins);
> @@ -3519,6 +3525,7 @@ static void cx_auto_line_automute(struct hda_codec
> *codec)
> struct conexant_spec *spec = codec->spec;
> struct auto_pin_cfg *cfg = &spec->autocfg;
>
> + printk("XXX cx_auto_line_automute\n");
> if (!spec->auto_mute || !spec->detect_line)
> return;
> spec->line_present = detect_jacks(codec, cfg->line_outs,
> @@ -3703,6 +3710,8 @@ static int cx_auto_mux_enum_update(struct hda_codec
> *codec,
> return 0;
> if (idx >= imux->num_items)
> idx = imux->num_items - 1;
> + printk("XXX cx_auto_mux_enum_update idx=%d, adc=%x, pin=%x\n",
> + idx, spec->imux_info[idx].adc, spec->imux_info[idx].pin);
> if (spec->cur_mux[0] == idx)
> changed = 0;
> adc = spec->imux_info[idx].adc;
> @@ -3757,6 +3766,7 @@ static void cx_auto_automic(struct hda_codec *codec)
> {
> struct conexant_spec *spec = codec->spec;
>
> + printk("XXX cx_auto_automic\n");
> if (!spec->auto_mic)
> return;
> if (!select_automic(codec, spec->auto_mic_ext, true))
>
[-- Attachment #2: alsa-info.txt.PgGTmgfAEl --]
[-- Type: application/octet-stream, Size: 14681 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Tue May 24 09:56:37 UTC 2011
!!Linux Distribution
!!------------------
Linux Mint Xfce Edition \n \l DISTRIB_ID=LinuxMint DISTRIB_CODENAME=debian DISTRIB_DESCRIPTION="Linux Mint Xfce Edition"
!!DMI Information
!!---------------
Manufacturer: LENOVO
Product Name: 0873
Product Version: Lenovo G555
!!Kernel Information
!!------------------
Kernel release: 2.6.38-2-amd64
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.24.13.g953fe.286.ge539e
Library version: 1.0.24.1
Utilities version: 1.0.24.2
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0x92400000 irq 16
!!PCI Soundcards installed in the system
!!--------------------------------------
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!--------------------------------------------------------
00:14.2 0403: 1002:4383
Subsystem: 17aa:3938
!!Modprobe options (Sound related)
!!--------------------------------
snd-hda-intel: model=auto
snd-hda-intel: model=auto
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1
enable : Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1
model : auto,(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0
single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Conexant CX20585
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x14f15069
Subsystem Id: 0x17aac007
Revision Id: 0x100302
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x2f 0x2f]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4d 0x4d] [0x80 0x80] [0x4d 0x4d] [0x80 0x80]
Converter: stream=1, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x02 0x02]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x022110f0: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=37, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x95a701f0: [Fixed] Mic at Int Top
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x02a110f0: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=38, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x921701f0: [Fixed] Speaker at Int Front
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0
Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [SB]
Card hw:0 'SB'/'HDA ATI SB at 0x92400000 irq 16'
Mixer name : 'Conexant CX20585'
Components : 'HDA:14f15069,17aac007,00100302'
Controls : 6
Simple ctrls : 4
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 74
Mono:
Front Left: Playback 47 [64%] [-27.00dB] [on]
Front Right: Playback 47 [64%] [-27.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 251 [98%] [0.80dB]
Front Right: Playback 251 [98%] [0.80dB]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 80
Front Left: Capture 77 [96%] [3.00dB] [on]
Front Right: Capture 77 [96%] [3.00dB] [on]
Simple mixer control 'Analog Mic Boost',0
Capabilities: cenum
Items: '0dB' '10dB' '20dB' '30dB' '40dB'
Item0: '20dB'
!!Alsactl output
!!-------------
--startcollapse--
state.SB {
control.1 {
iface MIXER
name 'Master Playback Volume'
value.0 47
value.1 47
comment {
access 'read write'
type INTEGER
count 2
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 -2700
dbvalue.1 -2700
}
}
control.2 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.3 {
iface MIXER
name 'Analog Mic Boost Capture Enum'
value '20dB'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 '0dB'
item.1 '10dB'
item.2 '20dB'
item.3 '30dB'
item.4 '40dB'
}
}
control.4 {
iface MIXER
name 'Capture Volume'
value.0 77
value.1 77
comment {
access 'read write'
type INTEGER
count 2
range '0 - 80'
dbmin -7400
dbmax 600
dbvalue.0 300
dbvalue.1 300
}
}
control.5 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.6 {
iface MIXER
name 'PCM Playback Volume'
value.0 251
value.1 251
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -80
dbvalue.1 -80
}
}
}
--endcollapse--
!!ALSA configuration files
!!------------------------
!!System wide config file (/etc/asound.conf)
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
}
ctl.!default {
type pulse
}
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 0 May 24 09:53 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 24 May 24 09:55 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 16 May 24 10:54 /dev/snd/pcmC0D0p
crw------- 1 root root 116, 1 May 24 09:53 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 May 24 09:53 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 May 24 09:53 .
drwxr-xr-x 3 root root 160 May 24 09:53 ..
lrwxrwxrwx 1 root root 12 May 24 09:53 pci-0000:00:14.2 -> ../controlC0
!!ALSA/HDA dmesg
!!------------------
[ 34.054221] [drm] Loading RS780 Microcode
[ 34.569116] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 34.569160] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 34.623995] radeon 0000:01:05.0: WB enabled
--
[ 3764.674674] [UFW BLOCK] IN=eth2 OUT= MAC=01:00:5e:00:00:01:c0:d0:44:40:9a:1d:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=18287 DF PROTO=2
[ 3798.888009] ALSA hda_intel.c:717: azx_get_response timeout, switching to polling mode: last cmd=0x001f000a
[ 3799.892016] ALSA hda_intel.c:756: hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x001f000a
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-24 10:57 ` Roo - Andrew Baines
@ 2011-05-24 11:07 ` Takashi Iwai
2011-05-24 12:04 ` Roo - Andrew Baines
0 siblings, 1 reply; 14+ messages in thread
From: Takashi Iwai @ 2011-05-24 11:07 UTC (permalink / raw)
To: Roo - Andrew Baines; +Cc: alsa-devel
At Tue, 24 May 2011 11:57:16 +0100,
Roo - Andrew Baines wrote:
>
> I tried the patch but for some reason it fails, am i using patch wrong? When
> I try and open it in Kompare it says its not a valid diff file.
Did you save it as a raw file? Otherwise gmail interface breaks lines
and spaces badly.
> shark alsa-kernel # patch -p2 </home/roo/alsa-patch
> patching file pci/hda/patch_conexant.c
> Hunk #1 FAILED at 3484.
> Hunk #2 FAILED at 3508.
> Hunk #3 FAILED at 3519.
> Hunk #4 FAILED at 3703.
> Hunk #5 FAILED at 3757.
> 5 out of 5 hunks FAILED -- saving rejects to file
> pci/hda/patch_conexant.c.rej
>
> New alsa-info.sh output is attached also.
>
> When I ran arecord with pasuspender I got an error 'D is not a valid option'
> so I killed pulse and did arecord.
Then pass like "pasuspender -- arecord ....". Depending on PA
version, you need "--".
> What I got was a 0.00 second long
> recording even if i specified --duration=10.
>
> There are no alsa records in /var/log/messages at all when I grep for ALSA,
> alsa, conexant, snd, sound.
You have the following kernel messages:
[ 3798.888009] ALSA hda_intel.c:717: azx_get_response timeout, switching to polling mode: last cmd=0x001f000a
[ 3799.892016] ALSA hda_intel.c:756: hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x001f000a
This is rather a fatal error, which makes impossible to get
unsolicited events from the codec.
And, judging from alsa-info.sh output, you are still using the old
driver. With the new driver, you must have "Auto-Mute" enum mixer
element. That is, the installation from the snapshot tarball failed
somehow. Double-check what went wrong. The error above should have
been fixed in the recent version.
BTW, I fixed another issue in auto-mute mode, so try the latest
snapshot tarball again.
thanks,
Takashi
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-24 11:07 ` Takashi Iwai
@ 2011-05-24 12:04 ` Roo - Andrew Baines
2011-05-24 12:16 ` Takashi Iwai
0 siblings, 1 reply; 14+ messages in thread
From: Roo - Andrew Baines @ 2011-05-24 12:04 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 3055 bytes --]
Ah, ok, so I opened the email as raw text and I'm getting somewhere... I
have attached the patch I am trying to apply, I apologise I have really very
little idea.
shark alsa-kernel # patch -p2 </home/roo/patch
patching file pci/hda/patch_conexant.c
Hunk #1 FAILED at 3484.
Hunk #2 succeeded at 3330 with fuzz 2 (offset -178 lines).
Hunk #3 FAILED at 3520.
Hunk #4 FAILED at 3704.
Hunk #5 succeeded at 3363 with fuzz 2 (offset -395 lines).
3 out of 5 hunks FAILED -- saving rejects to file
pci/hda/patch_conexant.c.rej
I have also attached the latest alsa-info. In alsamixer I dont seem to have
the auto-mute mixer, but I think I am running the latest snapshot:
roo@shark ~ $ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version
1.0.24.13.g953fe.286.ge539e.
Compiled on May 24 2011 for kernel 2.6.38-2-amd64 (SMP).
I am compiling as follows:
./configure --with-cards=hda-intel --with-sequencer=yes
make
make install
If I include --with-card-options=hda-codec-conexant it doesnt seem to make a
difference.
Thanks
Andrew
On 24 May 2011 12:07, Takashi Iwai <tiwai@suse.de> wrote:
> At Tue, 24 May 2011 11:57:16 +0100,
> Roo - Andrew Baines wrote:
> >
> > I tried the patch but for some reason it fails, am i using patch wrong?
> When
> > I try and open it in Kompare it says its not a valid diff file.
>
> Did you save it as a raw file? Otherwise gmail interface breaks lines
> and spaces badly.
>
> > shark alsa-kernel # patch -p2 </home/roo/alsa-patch
> > patching file pci/hda/patch_conexant.c
> > Hunk #1 FAILED at 3484.
> > Hunk #2 FAILED at 3508.
> > Hunk #3 FAILED at 3519.
> > Hunk #4 FAILED at 3703.
> > Hunk #5 FAILED at 3757.
> > 5 out of 5 hunks FAILED -- saving rejects to file
> > pci/hda/patch_conexant.c.rej
> >
> > New alsa-info.sh output is attached also.
> >
> > When I ran arecord with pasuspender I got an error 'D is not a valid
> option'
> > so I killed pulse and did arecord.
>
> Then pass like "pasuspender -- arecord ....". Depending on PA
> version, you need "--".
>
> > What I got was a 0.00 second long
> > recording even if i specified --duration=10.
> >
> > There are no alsa records in /var/log/messages at all when I grep for
> ALSA,
> > alsa, conexant, snd, sound.
>
> You have the following kernel messages:
> [ 3798.888009] ALSA hda_intel.c:717: azx_get_response timeout, switching to
> polling mode: last cmd=0x001f000a
> [ 3799.892016] ALSA hda_intel.c:756: hda_intel: azx_get_response timeout,
> switching to single_cmd mode: last cmd=0x001f000a
>
> This is rather a fatal error, which makes impossible to get
> unsolicited events from the codec.
>
> And, judging from alsa-info.sh output, you are still using the old
> driver. With the new driver, you must have "Auto-Mute" enum mixer
> element. That is, the installation from the snapshot tarball failed
> somehow. Double-check what went wrong. The error above should have
> been fixed in the recent version.
>
> BTW, I fixed another issue in auto-mute mode, so try the latest
> snapshot tarball again.
>
>
> thanks,
>
> Takashi
>
[-- Attachment #2: patch --]
[-- Type: application/octet-stream, Size: 2121 bytes --]
---
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index e8dc736..1095bbb 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3484,11 +3484,16 @@ static void cx_auto_update_speakers(struct hda_codec *codec)
struct auto_pin_cfg *cfg = &spec->autocfg;
int on;
+ printk("XXX cx_auto_update_speakers: auto_mute=%d, hp_present=%d, line_present=%d\n", spec->auto_mute, spec->hp_present, spec->line_present);
if (!spec->auto_mute)
- on = 0;
+ on = 1;
else
- on = spec->hp_present | spec->line_present;
+ on = spec->hp_present;
cx_auto_turn_eapd(codec, cfg->hp_outs, cfg->hp_pins, on);
+ if (!spec->auto_mute)
+ on = 0;
+ else
+ on |= spec->detect_line && spec->line_present;
do_automute(codec, cfg->speaker_outs, cfg->speaker_pins, !on);
/* toggle line-out mutes if needed, too */
@@ -3508,6 +3513,7 @@ static void cx_auto_hp_automute(struct hda_codec *codec)
struct conexant_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
+ printk("XXX cx_auto_hp_automute\n");
if (!spec->auto_mute)
return;
spec->hp_present = detect_jacks(codec, cfg->hp_outs, cfg->hp_pins);
@@ -3519,6 +3525,7 @@ static void cx_auto_line_automute(struct hda_codec *codec)
struct conexant_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
+ printk("XXX cx_auto_line_automute\n");
if (!spec->auto_mute || !spec->detect_line)
return;
spec->line_present = detect_jacks(codec, cfg->line_outs,
@@ -3703,6 +3710,8 @@ static int cx_auto_mux_enum_update(struct hda_codec *codec,
return 0;
if (idx >= imux->num_items)
idx = imux->num_items - 1;
+ printk("XXX cx_auto_mux_enum_update idx=%d, adc=%x, pin=%x\n",
+ idx, spec->imux_info[idx].adc, spec->imux_info[idx].pin);
if (spec->cur_mux[0] == idx)
changed = 0;
adc = spec->imux_info[idx].adc;
@@ -3757,6 +3766,7 @@ static void cx_auto_automic(struct hda_codec *codec)
{
struct conexant_spec *spec = codec->spec;
+ printk("XXX cx_auto_automic\n");
if (!spec->auto_mic)
return;
if (!select_automic(codec, spec->auto_mic_ext, true))
[-- Attachment #3: alsa-info.txt.aTVRpJvwkf --]
[-- Type: application/octet-stream, Size: 16786 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Tue May 24 11:54:54 UTC 2011
!!Linux Distribution
!!------------------
Linux Mint Xfce Edition \n \l DISTRIB_ID=LinuxMint DISTRIB_CODENAME=debian DISTRIB_DESCRIPTION="Linux Mint Xfce Edition"
!!DMI Information
!!---------------
Manufacturer: LENOVO
Product Name: 0873
Product Version: Lenovo G555
!!Kernel Information
!!------------------
Kernel release: 2.6.38-2-amd64
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.24.13.g953fe.286.ge539e
Library version: 1.0.24.1
Utilities version: 1.0.24.2
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0x92400000 irq 16
!!PCI Soundcards installed in the system
!!--------------------------------------
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!--------------------------------------------------------
00:14.2 0403: 1002:4383
Subsystem: 17aa:3938
!!Modprobe options (Sound related)
!!--------------------------------
snd-hda-intel: model=auto
snd-hda-intel: model=auto
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : auto,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 0
power_save_controller : N
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Conexant CX20585
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x14f15069
Subsystem Id: 0x17aac007
Revision Id: 0x100302
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x4a 0x4a]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4d 0x4d] [0x80 0x80] [0x4d 0x4d] [0x80 0x80]
Converter: stream=1, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x02 0x02]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x022110f0: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=37, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x95a701f0: [Fixed] Mic at Int Top
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x02a110f0: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=38, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x921701f0: [Fixed] Speaker at Int Front
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0
Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [SB]
Card hw:0 'SB'/'HDA ATI SB at 0x92400000 irq 16'
Mixer name : 'Conexant CX20585'
Components : 'HDA:14f15069,17aac007,00100302'
Controls : 8
Simple ctrls : 5
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 74
Mono:
Front Left: Playback 74 [100%] [0.00dB] [on]
Front Right: Playback 74 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 253 [99%] [0.40dB]
Front Right: Playback 253 [99%] [0.40dB]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 7
Mono: Playback 0 [0%] [-28.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 80
Front Left: Capture 77 [96%] [3.00dB] [on]
Front Right: Capture 77 [96%] [3.00dB] [on]
Simple mixer control 'Analog Mic Boost',0
Capabilities: cenum
Items: '0dB' '10dB' '20dB' '30dB' '40dB'
Item0: '20dB'
!!Alsactl output
!!-------------
--startcollapse--
state.SB {
control.1 {
iface MIXER
name 'Master Playback Volume'
value.0 74
value.1 74
comment {
access 'read write'
type INTEGER
count 2
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.3 {
iface MIXER
name 'Analog Mic Boost Capture Enum'
value '20dB'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 '0dB'
item.1 '10dB'
item.2 '20dB'
item.3 '30dB'
item.4 '40dB'
}
}
control.4 {
iface MIXER
name 'Capture Volume'
value.0 77
value.1 77
comment {
access 'read write'
type INTEGER
count 2
range '0 - 80'
dbmin -7400
dbmax 600
dbvalue.0 300
dbvalue.1 300
}
}
control.5 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.6 {
iface MIXER
name 'Beep Playback Volume'
value 0
comment {
access 'read write'
type INTEGER
count 1
range '0 - 7'
dbmin -2800
dbmax 0
dbvalue.0 -2800
}
}
control.7 {
iface MIXER
name 'Beep Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.8 {
iface MIXER
name 'PCM Playback Volume'
value.0 253
value.1 253
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -40
dbvalue.1 -40
}
}
}
--endcollapse--
!!ALSA configuration files
!!------------------------
!!System wide config file (/etc/asound.conf)
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
}
ctl.!default {
type pulse
}
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 5 May 24 12:47 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 4 May 24 12:47 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 3 May 24 12:51 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 2 May 24 12:48 /dev/snd/pcmC0D0p
crw------- 1 root root 116, 1 May 24 12:47 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 May 24 12:47 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 May 24 12:47 .
drwxr-xr-x 3 root root 180 May 24 12:47 ..
lrwxrwxrwx 1 root root 12 May 24 12:47 pci-0000:00:14.2 -> ../controlC0
!!ALSA/HDA dmesg
!!------------------
[ 14.941595] [drm] radeon: power management initialized
[ 15.135716] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.135757] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 15.401074] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 16.455915] [drm] fb mappable at 0x80141000
--
[ 200.808922] [UFW BLOCK] IN=eth2 OUT= MAC=01:00:5e:00:00:fb:00:21:e9:dc:c1:5a:08:00 SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=32008 PROTO=2
[ 274.612015] ALSA hda_intel.c:717: azx_get_response timeout, switching to polling mode: last cmd=0x014a0000
[ 275.616010] ALSA hda_intel.c:756: hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x014a0000
[ 326.046102] [UFW BLOCK] IN=eth2 OUT= MAC=01:00:5e:00:00:01:c0:d0:44:40:9a:1d:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=18348 DF PROTO=2
[-- Attachment #4: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-24 12:04 ` Roo - Andrew Baines
@ 2011-05-24 12:16 ` Takashi Iwai
2011-05-24 13:25 ` Roo - Andrew Baines
0 siblings, 1 reply; 14+ messages in thread
From: Takashi Iwai @ 2011-05-24 12:16 UTC (permalink / raw)
To: Roo - Andrew Baines; +Cc: alsa-devel
At Tue, 24 May 2011 13:04:22 +0100,
Roo - Andrew Baines wrote:
>
> Ah, ok, so I opened the email as raw text and I'm getting somewhere... I
> have attached the patch I am trying to apply, I apologise I have really very
> little idea.
>
> shark alsa-kernel # patch -p2 </home/roo/patch
> patching file pci/hda/patch_conexant.c
> Hunk #1 FAILED at 3484.
> Hunk #2 succeeded at 3330 with fuzz 2 (offset -178 lines).
> Hunk #3 FAILED at 3520.
> Hunk #4 FAILED at 3704.
> Hunk #5 succeeded at 3363 with fuzz 2 (offset -395 lines).
> 3 out of 5 hunks FAILED -- saving rejects to file
> pci/hda/patch_conexant.c.rej
>
> I have also attached the latest alsa-info. In alsamixer I dont seem to have
> the auto-mute mixer, but I think I am running the latest snapshot:
>
> roo@shark ~ $ cat /proc/asound/version
> Advanced Linux Sound Architecture Driver Version
> 1.0.24.13.g953fe.286.ge539e.
Where did you get the snapshot tarball from? It must be:
ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
Note that this is different from the tarball in alsa-project.org. The
one in alsa-project.org is far behind the latest version. It explains
why the patch failed.
(BTW, try the above tarball first without patching.)
> Compiled on May 24 2011 for kernel 2.6.38-2-amd64 (SMP).
>
> I am compiling as follows:
>
> ./configure --with-cards=hda-intel --with-sequencer=yes
> make
> make install
In general, it's recommended to build all drivers, and use the update
directory. The partial builds cause often dependency problems.
As mentioned in INSTALL, a safe combination is:
% ./configure --with-debug=full --enable-dynamic-minors \
--with-moddir=updates
This will install the resultant modules into
/lib/modules/$VERSION/updates/*. So, you can remove these files
easily and back to the original state.
Takashi
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-24 12:16 ` Takashi Iwai
@ 2011-05-24 13:25 ` Roo - Andrew Baines
2011-05-24 15:02 ` Takashi Iwai
0 siblings, 1 reply; 14+ messages in thread
From: Roo - Andrew Baines @ 2011-05-24 13:25 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 2237 bytes --]
Ah, I was using the snapshot from alsa-project.org.
Sorry about that. The (actual) latest snapshot couldnt work better. I have
attached this alsa-info.
Thank you ever so much for your help!
Andrew
On 24 May 2011 13:16, Takashi Iwai <tiwai@suse.de> wrote:
> At Tue, 24 May 2011 13:04:22 +0100,
> Roo - Andrew Baines wrote:
> >
> > Ah, ok, so I opened the email as raw text and I'm getting somewhere... I
> > have attached the patch I am trying to apply, I apologise I have really
> very
> > little idea.
> >
> > shark alsa-kernel # patch -p2 </home/roo/patch
> > patching file pci/hda/patch_conexant.c
> > Hunk #1 FAILED at 3484.
> > Hunk #2 succeeded at 3330 with fuzz 2 (offset -178 lines).
> > Hunk #3 FAILED at 3520.
> > Hunk #4 FAILED at 3704.
> > Hunk #5 succeeded at 3363 with fuzz 2 (offset -395 lines).
> > 3 out of 5 hunks FAILED -- saving rejects to file
> > pci/hda/patch_conexant.c.rej
> >
> > I have also attached the latest alsa-info. In alsamixer I dont seem to
> have
> > the auto-mute mixer, but I think I am running the latest snapshot:
> >
> > roo@shark ~ $ cat /proc/asound/version
> > Advanced Linux Sound Architecture Driver Version
> > 1.0.24.13.g953fe.286.ge539e.
>
> Where did you get the snapshot tarball from? It must be:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
>
> Note that this is different from the tarball in alsa-project.org. The
> one in alsa-project.org is far behind the latest version. It explains
> why the patch failed.
>
> (BTW, try the above tarball first without patching.)
>
>
> > Compiled on May 24 2011 for kernel 2.6.38-2-amd64 (SMP).
> >
> > I am compiling as follows:
> >
> > ./configure --with-cards=hda-intel --with-sequencer=yes
> > make
> > make install
>
> In general, it's recommended to build all drivers, and use the update
> directory. The partial builds cause often dependency problems.
> As mentioned in INSTALL, a safe combination is:
>
> % ./configure --with-debug=full --enable-dynamic-minors \
> --with-moddir=updates
>
> This will install the resultant modules into
> /lib/modules/$VERSION/updates/*. So, you can remove these files
> easily and back to the original state.
>
>
> Takashi
>
[-- Attachment #2: alsa-info.txt.4RNZw3SMld --]
[-- Type: application/octet-stream, Size: 19003 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Tue May 24 13:24:48 UTC 2011
!!Linux Distribution
!!------------------
Linux Mint Xfce Edition \n \l DISTRIB_ID=LinuxMint DISTRIB_CODENAME=debian DISTRIB_DESCRIPTION="Linux Mint Xfce Edition"
!!DMI Information
!!---------------
Manufacturer: LENOVO
Product Name: 0873
Product Version: Lenovo G555
!!Kernel Information
!!------------------
Kernel release: 2.6.38-2-amd64
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.24
Library version: 1.0.24.1
Utilities version: 1.0.24.2
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0x92400000 irq 16
!!PCI Soundcards installed in the system
!!--------------------------------------
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!--------------------------------------------------------
00:14.2 0403: 1002:4383
Subsystem: 17aa:3938
!!Modprobe options (Sound related)
!!--------------------------------
snd-hda-intel: model=auto
snd-hda-intel: model=auto
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : auto,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 0
power_save_controller : N
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Conexant CX20585
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x14f15069
Subsystem Id: 0x17aac007
Revision Id: 0x100302
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x3e 0x3e]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x3e 0x3e]
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0
Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x47 0x47] [0x80 0x80] [0x4d 0x4d] [0x80 0x80]
Converter: stream=1, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24
Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x04 0x04]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x022110f0: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=37, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11*
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x95a701f0: [Fixed] Mic at Int Top
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x02a110f0: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=38, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x921701f0: [Fixed] Speaker at Int Front
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0
Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [SB]
Card hw:0 'SB'/'HDA ATI SB at 0x92400000 irq 16'
Mixer name : 'Conexant CX20585'
Components : 'HDA:14f15069,17aac007,00100302'
Controls : 13
Simple ctrls : 8
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 74
Mono: Playback 62 [84%] [-12.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 74
Mono:
Front Left: Playback 74 [100%] [0.00dB] [on]
Front Right: Playback 74 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 74
Mono:
Front Left: Playback 74 [100%] [0.00dB] [on]
Front Right: Playback 74 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 254 [100%] [0.20dB]
Front Right: Playback 254 [100%] [0.20dB]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 7
Mono: Playback 0 [0%] [-28.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 80
Front Left: Capture 71 [89%] [-3.00dB] [on]
Front Right: Capture 71 [89%] [-3.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 4
Front Left: 4 [100%] [40.00dB]
Front Right: 4 [100%] [40.00dB]
!!Alsactl output
!!-------------
--startcollapse--
state.SB {
control.1 {
iface MIXER
name 'Speaker Playback Volume'
value.0 74
value.1 74
comment {
access 'read write'
type INTEGER
count 2
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Headphone Playback Volume'
value.0 74
value.1 74
comment {
access 'read write'
type INTEGER
count 2
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.4 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.6 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 4
value.1 4
comment {
access 'read write'
type INTEGER
count 2
range '0 - 4'
dbmin 0
dbmax 4000
dbvalue.0 4000
dbvalue.1 4000
}
}
control.7 {
iface MIXER
name 'Capture Volume'
value.0 71
value.1 71
comment {
access 'read write'
type INTEGER
count 2
range '0 - 80'
dbmin -7400
dbmax 600
dbvalue.0 -300
dbvalue.1 -300
}
}
control.8 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.9 {
iface MIXER
name 'Master Playback Volume'
value 62
comment {
access 'read write'
type INTEGER
count 1
range '0 - 74'
dbmin -7400
dbmax 0
dbvalue.0 -1200
}
}
control.10 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.11 {
iface MIXER
name 'Beep Playback Volume'
value 0
comment {
access 'read write'
type INTEGER
count 1
range '0 - 7'
dbmin -2800
dbmax 0
dbvalue.0 -2800
}
}
control.12 {
iface MIXER
name 'Beep Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.13 {
iface MIXER
name 'PCM Playback Volume'
value.0 254
value.1 254
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -20
dbvalue.1 -20
}
}
}
--endcollapse--
!!ALSA configuration files
!!------------------------
!!System wide config file (/etc/asound.conf)
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
}
ctl.!default {
type pulse
}
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 5 May 24 14:13 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 4 May 24 14:13 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 3 May 24 14:17 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 2 May 24 14:17 /dev/snd/pcmC0D0p
crw------- 1 root root 116, 1 May 24 14:13 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 May 24 14:13 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 May 24 14:13 .
drwxr-xr-x 3 root root 180 May 24 14:13 ..
lrwxrwxrwx 1 root root 12 May 24 14:13 pci-0000:00:14.2 -> ../controlC0
!!ALSA/HDA dmesg
!!------------------
[ 17.443897] [drm] radeon: power management initialized
[ 17.702017] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.702059] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 17.733082] ALSA hda_intel.c:1463: Enable sync_write for AMD chipset
[ 17.827557] ALSA hda_codec.c:3771: hda_codec: model 'auto' is selected
[ 17.827561] hda_codec: CX20585: BIOS auto-probing.
[ 17.827568] ALSA hda_codec.c:4707: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 17.827573] ALSA hda_codec.c:4711: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.827576] ALSA hda_codec.c:4715: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 17.827579] ALSA hda_codec.c:4716: mono: mono_out=0x0
[ 17.827582] ALSA hda_codec.c:4720: inputs:
[ 17.827584] ALSA hda_codec.c:4726:
[ 17.828274] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 18.948389] [drm] fb mappable at 0x80141000
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-24 13:25 ` Roo - Andrew Baines
@ 2011-05-24 15:02 ` Takashi Iwai
2011-05-24 15:25 ` Roo - Andrew Baines
0 siblings, 1 reply; 14+ messages in thread
From: Takashi Iwai @ 2011-05-24 15:02 UTC (permalink / raw)
To: Roo - Andrew Baines; +Cc: alsa-devel
At Tue, 24 May 2011 14:25:17 +0100,
Roo - Andrew Baines wrote:
>
> Ah, I was using the snapshot from alsa-project.org.
>
> Sorry about that. The (actual) latest snapshot couldnt work better.
Are you sure? What doesn't work better? And how did you test it?
As far as I see, the connection from internal-mic to ADC is OK.
But you set all volumes to max, and this would result in too
overloaded signal, anyway.
And, the HP auto-muting should work now.
Takashi
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-24 15:02 ` Takashi Iwai
@ 2011-05-24 15:25 ` Roo - Andrew Baines
2011-05-24 16:20 ` Takashi Iwai
0 siblings, 1 reply; 14+ messages in thread
From: Roo - Andrew Baines @ 2011-05-24 15:25 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Haha, no sorry, it couldnt work better - as in its working perfectly and
could not be better!
I have reduced the volumes now.
Sorry for the confusion, and thanks for the help.
Andrew
On 24 May 2011 16:02, Takashi Iwai <tiwai@suse.de> wrote:
> At Tue, 24 May 2011 14:25:17 +0100,
> Roo - Andrew Baines wrote:
> >
> > Ah, I was using the snapshot from alsa-project.org.
> >
> > Sorry about that. The (actual) latest snapshot couldnt work better.
>
> Are you sure? What doesn't work better? And how did you test it?
>
> As far as I see, the connection from internal-mic to ADC is OK.
> But you set all volumes to max, and this would result in too
> overloaded signal, anyway.
>
> And, the HP auto-muting should work now.
>
>
> Takashi
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic
2011-05-24 15:25 ` Roo - Andrew Baines
@ 2011-05-24 16:20 ` Takashi Iwai
0 siblings, 0 replies; 14+ messages in thread
From: Takashi Iwai @ 2011-05-24 16:20 UTC (permalink / raw)
To: Roo - Andrew Baines; +Cc: alsa-devel
At Tue, 24 May 2011 16:25:45 +0100,
Roo - Andrew Baines wrote:
>
> Haha, no sorry, it couldnt work better - as in its working perfectly and
> could not be better!
>
> I have reduced the volumes now.
>
> Sorry for the confusion, and thanks for the help.
Huh, that relieves me ;)
Takashi
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2011-05-24 16:20 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-23 15:58 Regression post-ALSA 1.0.22 for Lenovo G555 Internal mic Roo - Andrew Baines
2011-05-23 16:14 ` Takashi Iwai
2011-05-23 17:07 ` Roo - Andrew Baines
2011-05-23 19:23 ` Takashi Iwai
2011-05-23 22:24 ` Roo - Andrew Baines
2011-05-24 9:38 ` Takashi Iwai
2011-05-24 10:57 ` Roo - Andrew Baines
2011-05-24 11:07 ` Takashi Iwai
2011-05-24 12:04 ` Roo - Andrew Baines
2011-05-24 12:16 ` Takashi Iwai
2011-05-24 13:25 ` Roo - Andrew Baines
2011-05-24 15:02 ` Takashi Iwai
2011-05-24 15:25 ` Roo - Andrew Baines
2011-05-24 16:20 ` Takashi Iwai
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.