* [PATCH 1/2] dts/amlogic: Add MagicBox M16S support
[not found] <20220723155502.127404-1-zhangn1985@qq.com>
@ 2022-07-23 15:55 ` Zhang Ning
2022-07-23 15:55 ` Zhang Ning
1 sibling, 0 replies; 17+ messages in thread
From: Zhang Ning @ 2022-07-23 15:55 UTC (permalink / raw)
To: narmstrong, sean, linux-amlogic, linux-arm-kernel, linux-media; +Cc: Zhang Ning
MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
it's q201_v1 according u-boot log.
and it's almost same as Q201 reference design.
add a simple dts to support this Tv box.
Signed-off-by: Zhang Ning <zhangn1985@qq.com>
---
.../devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-gxm-magicbox-m16s.dts | 36 +++++++++++++++++++
3 files changed, 38 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 61a6cabb375b..3eac16a4de68 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -123,6 +123,7 @@ properties:
- khadas,vim2
- kingnovel,r-box-pro
- libretech,aml-s912-pc
+ - magicbox,m16s
- minix,neo-u9h
- nexbox,a1
- tronsmart,vega-s96
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8773211df50e..e0907fb41829 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-magicbox-m16s.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
new file mode 100644
index 000000000000..464de73d2f0f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Zhang Ning <zhangn1985@qq.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "magicbox,m16s", "amlogic,s912", "amlogic,meson-gxm";
+ model = "MagicBox M16S";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button-power {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+ðmac {
+ phy-mode = "rmii";
+ phy-handle = <&internal_phy>;
+};
+
+&sdio_pwrseq {
+ reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>;
+};
--
2.35.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 1/2] dts/amlogic: Add MagicBox M16S support
@ 2022-07-23 15:55 ` Zhang Ning
0 siblings, 0 replies; 17+ messages in thread
From: Zhang Ning @ 2022-07-23 15:55 UTC (permalink / raw)
To: narmstrong, sean, linux-amlogic, linux-arm-kernel, linux-media; +Cc: Zhang Ning
MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
it's q201_v1 according u-boot log.
and it's almost same as Q201 reference design.
add a simple dts to support this Tv box.
Signed-off-by: Zhang Ning <zhangn1985@qq.com>
---
.../devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-gxm-magicbox-m16s.dts | 36 +++++++++++++++++++
3 files changed, 38 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 61a6cabb375b..3eac16a4de68 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -123,6 +123,7 @@ properties:
- khadas,vim2
- kingnovel,r-box-pro
- libretech,aml-s912-pc
+ - magicbox,m16s
- minix,neo-u9h
- nexbox,a1
- tronsmart,vega-s96
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8773211df50e..e0907fb41829 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-magicbox-m16s.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
new file mode 100644
index 000000000000..464de73d2f0f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Zhang Ning <zhangn1985@qq.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "magicbox,m16s", "amlogic,s912", "amlogic,meson-gxm";
+ model = "MagicBox M16S";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ button-power {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+ðmac {
+ phy-mode = "rmii";
+ phy-handle = <&internal_phy>;
+};
+
+&sdio_pwrseq {
+ reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>;
+};
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S
[not found] <20220723155502.127404-1-zhangn1985@qq.com>
@ 2022-07-23 15:55 ` Zhang Ning
2022-07-23 15:55 ` Zhang Ning
1 sibling, 0 replies; 17+ messages in thread
From: Zhang Ning @ 2022-07-23 15:55 UTC (permalink / raw)
To: narmstrong, sean, linux-amlogic, linux-arm-kernel, linux-media; +Cc: Zhang Ning
Signed-off-by: Zhang Ning <zhangn1985@qq.com>
---
.../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++
drivers/media/rc/keymaps/Makefile | 1 +
drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++
include/media/rc-map.h | 1 +
4 files changed, 61 insertions(+)
create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
index 464de73d2f0f..69e72687ac9c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
@@ -34,3 +34,7 @@ ðmac {
&sdio_pwrseq {
reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>;
};
+
+&ir {
+ linux,rc-map-name = "rc-magicbox";
+};
diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index f513ff5caf4e..02c1c2150f03 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_RC_MAP) += \
rc-kworld-plus-tv-analog.o \
rc-leadtek-y04g0051.o \
rc-lme2510.o \
+ rc-magicbox.o \
rc-manli.o \
rc-mecool-kiii-pro.o \
rc-mecool-kii-pro.o \
diff --git a/drivers/media/rc/keymaps/rc-magicbox.c b/drivers/media/rc/keymaps/rc-magicbox.c
new file mode 100644
index 000000000000..7dd3afd8a42c
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-magicbox.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2022 Zhang Ning <zhangn1985@qq.com>
+
+/*
+ * Keytable for the MagicBox M16S remote control
+ */
+
+#include <media/rc-map.h>
+#include <linux/module.h>
+
+
+static struct rc_map_table magicbox[] = {
+ { 40791, KEY_POWER },
+ { 40842, KEY_MUTE }, // M
+
+ { 40771, KEY_UP },
+ { 40714, KEY_DOWN },
+ { 40710, KEY_LEFT },
+ { 40718, KEY_RIGHT },
+ { 40706, KEY_OK },
+
+ { 40775, KEY_HOME },
+ { 40783, KEY_BACK },
+ { 40726, KEY_MENU },
+
+ { 40959, KEY_VOLUMEDOWN },
+ { 40797, KEY_VOLUMEUP },
+
+};
+
+static struct rc_map_list magicbox_map = {
+ .map = {
+ .scan = magicbox,
+ .size = ARRAY_SIZE(magicbox),
+ .rc_proto = RC_PROTO_NEC,
+ .name = RC_MAP_MAGICBOX,
+ }
+};
+
+static int __init init_rc_map_magicbox(void)
+{
+ return rc_map_register(&magicbox_map);
+}
+
+static void __exit exit_rc_map_magicbox(void)
+{
+ rc_map_unregister(&magicbox_map);
+}
+
+module_init(init_rc_map_magicbox)
+module_exit(exit_rc_map_magicbox)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Zhang Ning <zhangn1985@qq.com>");
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 793b54342dff..656217b8e91b 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -277,6 +277,7 @@ struct rc_map *rc_map_get(const char *name);
#define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
#define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
#define RC_MAP_LME2510 "rc-lme2510"
+#define RC_MAP_MAGICBOX "rc-magicbox"
#define RC_MAP_MANLI "rc-manli"
#define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro"
#define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro"
--
2.35.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S
@ 2022-07-23 15:55 ` Zhang Ning
0 siblings, 0 replies; 17+ messages in thread
From: Zhang Ning @ 2022-07-23 15:55 UTC (permalink / raw)
To: narmstrong, sean, linux-amlogic, linux-arm-kernel, linux-media; +Cc: Zhang Ning
Signed-off-by: Zhang Ning <zhangn1985@qq.com>
---
.../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++
drivers/media/rc/keymaps/Makefile | 1 +
drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++
include/media/rc-map.h | 1 +
4 files changed, 61 insertions(+)
create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
index 464de73d2f0f..69e72687ac9c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
@@ -34,3 +34,7 @@ ðmac {
&sdio_pwrseq {
reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>;
};
+
+&ir {
+ linux,rc-map-name = "rc-magicbox";
+};
diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index f513ff5caf4e..02c1c2150f03 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_RC_MAP) += \
rc-kworld-plus-tv-analog.o \
rc-leadtek-y04g0051.o \
rc-lme2510.o \
+ rc-magicbox.o \
rc-manli.o \
rc-mecool-kiii-pro.o \
rc-mecool-kii-pro.o \
diff --git a/drivers/media/rc/keymaps/rc-magicbox.c b/drivers/media/rc/keymaps/rc-magicbox.c
new file mode 100644
index 000000000000..7dd3afd8a42c
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-magicbox.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2022 Zhang Ning <zhangn1985@qq.com>
+
+/*
+ * Keytable for the MagicBox M16S remote control
+ */
+
+#include <media/rc-map.h>
+#include <linux/module.h>
+
+
+static struct rc_map_table magicbox[] = {
+ { 40791, KEY_POWER },
+ { 40842, KEY_MUTE }, // M
+
+ { 40771, KEY_UP },
+ { 40714, KEY_DOWN },
+ { 40710, KEY_LEFT },
+ { 40718, KEY_RIGHT },
+ { 40706, KEY_OK },
+
+ { 40775, KEY_HOME },
+ { 40783, KEY_BACK },
+ { 40726, KEY_MENU },
+
+ { 40959, KEY_VOLUMEDOWN },
+ { 40797, KEY_VOLUMEUP },
+
+};
+
+static struct rc_map_list magicbox_map = {
+ .map = {
+ .scan = magicbox,
+ .size = ARRAY_SIZE(magicbox),
+ .rc_proto = RC_PROTO_NEC,
+ .name = RC_MAP_MAGICBOX,
+ }
+};
+
+static int __init init_rc_map_magicbox(void)
+{
+ return rc_map_register(&magicbox_map);
+}
+
+static void __exit exit_rc_map_magicbox(void)
+{
+ rc_map_unregister(&magicbox_map);
+}
+
+module_init(init_rc_map_magicbox)
+module_exit(exit_rc_map_magicbox)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Zhang Ning <zhangn1985@qq.com>");
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 793b54342dff..656217b8e91b 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -277,6 +277,7 @@ struct rc_map *rc_map_get(const char *name);
#define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
#define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
#define RC_MAP_LME2510 "rc-lme2510"
+#define RC_MAP_MAGICBOX "rc-magicbox"
#define RC_MAP_MANLI "rc-manli"
#define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro"
#define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro"
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S
2022-07-23 15:55 ` Zhang Ning
(?)
@ 2022-07-23 20:05 ` Martin Blumenstingl
-1 siblings, 0 replies; 17+ messages in thread
From: Martin Blumenstingl @ 2022-07-23 20:05 UTC (permalink / raw)
To: Zhang Ning
Cc: Neil Armstrong, sean, linux-amlogic, linux-arm-kernel, linux-media
Hi,
first of all: thank you for your patches!
On Sat, Jul 23, 2022 at 5:56 PM Zhang Ning <zhangn1985@qq.com> wrote:
>
I am not sure if the media subsystem requires it but most subsystem
maintainers want a description here.
See for example commit 7bb53f361c59b ("media: rc: add keymap for Tanix
TX5 max remote") which has been accepted previously.
> Signed-off-by: Zhang Ning <zhangn1985@qq.com>
> ---
> .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++
This should be part of the .dts patch (patch #1)
> drivers/media/rc/keymaps/Makefile | 1 +
> drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++
> include/media/rc-map.h | 1 +
Additionally we need a dt-bindings patch so the new value is
recognized by the .dts validation.
See commit d2fccf94495e57 ("media: dt-bindings: media: add new rc map
name") for an example.
dt-binding patches typically go first in the series.
[...]
> +static struct rc_map_table magicbox[] = {
> + { 40791, KEY_POWER },
> + { 40842, KEY_MUTE }, // M
> +
> + { 40771, KEY_UP },
> + { 40714, KEY_DOWN },
> + { 40710, KEY_LEFT },
> + { 40718, KEY_RIGHT },
> + { 40706, KEY_OK },
> +
> + { 40775, KEY_HOME },
> + { 40783, KEY_BACK },
> + { 40726, KEY_MENU },
> +
> + { 40959, KEY_VOLUMEDOWN },
> + { 40797, KEY_VOLUMEUP },
I checked a few other keymaps and they're using hex values for the key code.
That said, I am not familiar with the keymap code, so let's see what
the media maintainers think.
Best regards,
Martin
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S
@ 2022-07-23 20:05 ` Martin Blumenstingl
0 siblings, 0 replies; 17+ messages in thread
From: Martin Blumenstingl @ 2022-07-23 20:05 UTC (permalink / raw)
To: Zhang Ning
Cc: Neil Armstrong, sean, linux-amlogic, linux-arm-kernel, linux-media
Hi,
first of all: thank you for your patches!
On Sat, Jul 23, 2022 at 5:56 PM Zhang Ning <zhangn1985@qq.com> wrote:
>
I am not sure if the media subsystem requires it but most subsystem
maintainers want a description here.
See for example commit 7bb53f361c59b ("media: rc: add keymap for Tanix
TX5 max remote") which has been accepted previously.
> Signed-off-by: Zhang Ning <zhangn1985@qq.com>
> ---
> .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++
This should be part of the .dts patch (patch #1)
> drivers/media/rc/keymaps/Makefile | 1 +
> drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++
> include/media/rc-map.h | 1 +
Additionally we need a dt-bindings patch so the new value is
recognized by the .dts validation.
See commit d2fccf94495e57 ("media: dt-bindings: media: add new rc map
name") for an example.
dt-binding patches typically go first in the series.
[...]
> +static struct rc_map_table magicbox[] = {
> + { 40791, KEY_POWER },
> + { 40842, KEY_MUTE }, // M
> +
> + { 40771, KEY_UP },
> + { 40714, KEY_DOWN },
> + { 40710, KEY_LEFT },
> + { 40718, KEY_RIGHT },
> + { 40706, KEY_OK },
> +
> + { 40775, KEY_HOME },
> + { 40783, KEY_BACK },
> + { 40726, KEY_MENU },
> +
> + { 40959, KEY_VOLUMEDOWN },
> + { 40797, KEY_VOLUMEUP },
I checked a few other keymaps and they're using hex values for the key code.
That said, I am not familiar with the keymap code, so let's see what
the media maintainers think.
Best regards,
Martin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S
@ 2022-07-23 20:05 ` Martin Blumenstingl
0 siblings, 0 replies; 17+ messages in thread
From: Martin Blumenstingl @ 2022-07-23 20:05 UTC (permalink / raw)
To: Zhang Ning
Cc: Neil Armstrong, sean, linux-amlogic, linux-arm-kernel, linux-media
Hi,
first of all: thank you for your patches!
On Sat, Jul 23, 2022 at 5:56 PM Zhang Ning <zhangn1985@qq.com> wrote:
>
I am not sure if the media subsystem requires it but most subsystem
maintainers want a description here.
See for example commit 7bb53f361c59b ("media: rc: add keymap for Tanix
TX5 max remote") which has been accepted previously.
> Signed-off-by: Zhang Ning <zhangn1985@qq.com>
> ---
> .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++
This should be part of the .dts patch (patch #1)
> drivers/media/rc/keymaps/Makefile | 1 +
> drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++
> include/media/rc-map.h | 1 +
Additionally we need a dt-bindings patch so the new value is
recognized by the .dts validation.
See commit d2fccf94495e57 ("media: dt-bindings: media: add new rc map
name") for an example.
dt-binding patches typically go first in the series.
[...]
> +static struct rc_map_table magicbox[] = {
> + { 40791, KEY_POWER },
> + { 40842, KEY_MUTE }, // M
> +
> + { 40771, KEY_UP },
> + { 40714, KEY_DOWN },
> + { 40710, KEY_LEFT },
> + { 40718, KEY_RIGHT },
> + { 40706, KEY_OK },
> +
> + { 40775, KEY_HOME },
> + { 40783, KEY_BACK },
> + { 40726, KEY_MENU },
> +
> + { 40959, KEY_VOLUMEDOWN },
> + { 40797, KEY_VOLUMEUP },
I checked a few other keymaps and they're using hex values for the key code.
That said, I am not familiar with the keymap code, so let's see what
the media maintainers think.
Best regards,
Martin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] dts/amlogic: Add MagicBox M16S support
2022-07-23 15:55 ` Zhang Ning
(?)
@ 2022-07-23 20:14 ` Martin Blumenstingl
-1 siblings, 0 replies; 17+ messages in thread
From: Martin Blumenstingl @ 2022-07-23 20:14 UTC (permalink / raw)
To: Zhang Ning
Cc: Neil Armstrong, sean, linux-amlogic, linux-arm-kernel, linux-media
Hello,
great to see this patch!
On Sat, Jul 23, 2022 at 5:56 PM Zhang Ning <zhangn1985@qq.com> wrote:
>
> MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
>
> it's q201_v1 according u-boot log.
> and it's almost same as Q201 reference design.
>
> add a simple dts to support this Tv box.
It would be great if you could add the hardware specs from the
cover-letter here.
[...]
> diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
> index 61a6cabb375b..3eac16a4de68 100644
> --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
> +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
> @@ -123,6 +123,7 @@ properties:
> - khadas,vim2
> - kingnovel,r-box-pro
> - libretech,aml-s912-pc
> + - magicbox,m16s
> - minix,neo-u9h
> - nexbox,a1
> - tronsmart,vega-s96
The change itself is fine (entries are sorted alphabetically). It
should go into a separate dt-binding patch though.
See commit 3f7dbd336f360a ("dt-bindings: arm: amlogic: add Vero 4K+
bindings") for an example with the correct title and commit message.
[...]
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
#address-cells and #size-cells will be dropped in Linux 5.20 in all
existing .dts files, see [0]
Please do the same.
> + button-power {
Button/Key node labels are updated in 5.20 as well (see [1], but
button-power does match the recommended naming so no change is needed.
Thank you and best regards,
Martin
[0] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git/commit/?h=v5.20/arm64-dt&id=4956be9944d1fb23107f27bad8a2cca0fa167443
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git/commit/?h=v5.20/arm64-dt&id=4fd9afd894ebe5831dbd737e6ca7b6de14da7fda
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] dts/amlogic: Add MagicBox M16S support
@ 2022-07-23 20:14 ` Martin Blumenstingl
0 siblings, 0 replies; 17+ messages in thread
From: Martin Blumenstingl @ 2022-07-23 20:14 UTC (permalink / raw)
To: Zhang Ning
Cc: Neil Armstrong, sean, linux-amlogic, linux-arm-kernel, linux-media
Hello,
great to see this patch!
On Sat, Jul 23, 2022 at 5:56 PM Zhang Ning <zhangn1985@qq.com> wrote:
>
> MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
>
> it's q201_v1 according u-boot log.
> and it's almost same as Q201 reference design.
>
> add a simple dts to support this Tv box.
It would be great if you could add the hardware specs from the
cover-letter here.
[...]
> diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
> index 61a6cabb375b..3eac16a4de68 100644
> --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
> +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
> @@ -123,6 +123,7 @@ properties:
> - khadas,vim2
> - kingnovel,r-box-pro
> - libretech,aml-s912-pc
> + - magicbox,m16s
> - minix,neo-u9h
> - nexbox,a1
> - tronsmart,vega-s96
The change itself is fine (entries are sorted alphabetically). It
should go into a separate dt-binding patch though.
See commit 3f7dbd336f360a ("dt-bindings: arm: amlogic: add Vero 4K+
bindings") for an example with the correct title and commit message.
[...]
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
#address-cells and #size-cells will be dropped in Linux 5.20 in all
existing .dts files, see [0]
Please do the same.
> + button-power {
Button/Key node labels are updated in 5.20 as well (see [1], but
button-power does match the recommended naming so no change is needed.
Thank you and best regards,
Martin
[0] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git/commit/?h=v5.20/arm64-dt&id=4956be9944d1fb23107f27bad8a2cca0fa167443
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git/commit/?h=v5.20/arm64-dt&id=4fd9afd894ebe5831dbd737e6ca7b6de14da7fda
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] dts/amlogic: Add MagicBox M16S support
@ 2022-07-23 20:14 ` Martin Blumenstingl
0 siblings, 0 replies; 17+ messages in thread
From: Martin Blumenstingl @ 2022-07-23 20:14 UTC (permalink / raw)
To: Zhang Ning
Cc: Neil Armstrong, sean, linux-amlogic, linux-arm-kernel, linux-media
Hello,
great to see this patch!
On Sat, Jul 23, 2022 at 5:56 PM Zhang Ning <zhangn1985@qq.com> wrote:
>
> MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
>
> it's q201_v1 according u-boot log.
> and it's almost same as Q201 reference design.
>
> add a simple dts to support this Tv box.
It would be great if you could add the hardware specs from the
cover-letter here.
[...]
> diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
> index 61a6cabb375b..3eac16a4de68 100644
> --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
> +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
> @@ -123,6 +123,7 @@ properties:
> - khadas,vim2
> - kingnovel,r-box-pro
> - libretech,aml-s912-pc
> + - magicbox,m16s
> - minix,neo-u9h
> - nexbox,a1
> - tronsmart,vega-s96
The change itself is fine (entries are sorted alphabetically). It
should go into a separate dt-binding patch though.
See commit 3f7dbd336f360a ("dt-bindings: arm: amlogic: add Vero 4K+
bindings") for an example with the correct title and commit message.
[...]
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
#address-cells and #size-cells will be dropped in Linux 5.20 in all
existing .dts files, see [0]
Please do the same.
> + button-power {
Button/Key node labels are updated in 5.20 as well (see [1], but
button-power does match the recommended naming so no change is needed.
Thank you and best regards,
Martin
[0] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git/commit/?h=v5.20/arm64-dt&id=4956be9944d1fb23107f27bad8a2cca0fa167443
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git/commit/?h=v5.20/arm64-dt&id=4fd9afd894ebe5831dbd737e6ca7b6de14da7fda
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] dts/amlogic: Add MagicBox M16S support
2022-07-23 20:14 ` Martin Blumenstingl
@ 2022-07-23 23:22 ` Zhang Ning
-1 siblings, 0 replies; 17+ messages in thread
From: Zhang Ning @ 2022-07-23 23:22 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: Neil Armstrong, sean, linux-amlogic, linux-arm-kernel, linux-media
thank you for review, I will send next version according your advises.
On Sat, Jul 23, 2022 at 10:14:40PM +0200, Martin Blumenstingl wrote:
> Hello,
>
> great to see this patch!
>
> On Sat, Jul 23, 2022 at 5:56 PM Zhang Ning <zhangn1985@qq.com> wrote:
> >
> > MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
> >
> > it's q201_v1 according u-boot log.
> > and it's almost same as Q201 reference design.
> >
> > add a simple dts to support this Tv box.
> It would be great if you could add the hardware specs from the
> cover-letter here.
>
> [...]
> > diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
> > index 61a6cabb375b..3eac16a4de68 100644
> > --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
> > +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
> > @@ -123,6 +123,7 @@ properties:
> > - khadas,vim2
> > - kingnovel,r-box-pro
> > - libretech,aml-s912-pc
> > + - magicbox,m16s
> > - minix,neo-u9h
> > - nexbox,a1
> > - tronsmart,vega-s96
> The change itself is fine (entries are sorted alphabetically). It
> should go into a separate dt-binding patch though.
> See commit 3f7dbd336f360a ("dt-bindings: arm: amlogic: add Vero 4K+
> bindings") for an example with the correct title and commit message.
>
> [...]
> > + gpio-keys-polled {
> > + compatible = "gpio-keys-polled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> #address-cells and #size-cells will be dropped in Linux 5.20 in all
> existing .dts files, see [0]
> Please do the same.
>
> > + button-power {
> Button/Key node labels are updated in 5.20 as well (see [1], but
> button-power does match the recommended naming so no change is needed.
>
>
> Thank you and best regards,
> Martin
>
>
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git/commit/?h=v5.20/arm64-dt&id=4956be9944d1fb23107f27bad8a2cca0fa167443
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git/commit/?h=v5.20/arm64-dt&id=4fd9afd894ebe5831dbd737e6ca7b6de14da7fda
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] dts/amlogic: Add MagicBox M16S support
@ 2022-07-23 23:22 ` Zhang Ning
0 siblings, 0 replies; 17+ messages in thread
From: Zhang Ning @ 2022-07-23 23:22 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: Neil Armstrong, sean, linux-amlogic, linux-arm-kernel, linux-media
thank you for review, I will send next version according your advises.
On Sat, Jul 23, 2022 at 10:14:40PM +0200, Martin Blumenstingl wrote:
> Hello,
>
> great to see this patch!
>
> On Sat, Jul 23, 2022 at 5:56 PM Zhang Ning <zhangn1985@qq.com> wrote:
> >
> > MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
> >
> > it's q201_v1 according u-boot log.
> > and it's almost same as Q201 reference design.
> >
> > add a simple dts to support this Tv box.
> It would be great if you could add the hardware specs from the
> cover-letter here.
>
> [...]
> > diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
> > index 61a6cabb375b..3eac16a4de68 100644
> > --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
> > +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
> > @@ -123,6 +123,7 @@ properties:
> > - khadas,vim2
> > - kingnovel,r-box-pro
> > - libretech,aml-s912-pc
> > + - magicbox,m16s
> > - minix,neo-u9h
> > - nexbox,a1
> > - tronsmart,vega-s96
> The change itself is fine (entries are sorted alphabetically). It
> should go into a separate dt-binding patch though.
> See commit 3f7dbd336f360a ("dt-bindings: arm: amlogic: add Vero 4K+
> bindings") for an example with the correct title and commit message.
>
> [...]
> > + gpio-keys-polled {
> > + compatible = "gpio-keys-polled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> #address-cells and #size-cells will be dropped in Linux 5.20 in all
> existing .dts files, see [0]
> Please do the same.
>
> > + button-power {
> Button/Key node labels are updated in 5.20 as well (see [1], but
> button-power does match the recommended naming so no change is needed.
>
>
> Thank you and best regards,
> Martin
>
>
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git/commit/?h=v5.20/arm64-dt&id=4956be9944d1fb23107f27bad8a2cca0fa167443
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git/commit/?h=v5.20/arm64-dt&id=4fd9afd894ebe5831dbd737e6ca7b6de14da7fda
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S
2022-07-23 15:55 ` Zhang Ning
(?)
@ 2022-07-24 13:44 ` Sean Young
-1 siblings, 0 replies; 17+ messages in thread
From: Sean Young @ 2022-07-24 13:44 UTC (permalink / raw)
To: Zhang Ning; +Cc: narmstrong, linux-amlogic, linux-arm-kernel, linux-media
On Sat, Jul 23, 2022 at 11:55:02PM +0800, Zhang Ning wrote:
> Signed-off-by: Zhang Ning <zhangn1985@qq.com>
> ---
> .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++
> drivers/media/rc/keymaps/Makefile | 1 +
> drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++
> include/media/rc-map.h | 1 +
> 4 files changed, 61 insertions(+)
> create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> index 464de73d2f0f..69e72687ac9c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> @@ -34,3 +34,7 @@ ðmac {
> &sdio_pwrseq {
> reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>;
> };
> +
> +&ir {
> + linux,rc-map-name = "rc-magicbox";
> +};
As has been pointed out already, this should go a in a different patch.
> diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
> index f513ff5caf4e..02c1c2150f03 100644
> --- a/drivers/media/rc/keymaps/Makefile
> +++ b/drivers/media/rc/keymaps/Makefile
> @@ -71,6 +71,7 @@ obj-$(CONFIG_RC_MAP) += \
> rc-kworld-plus-tv-analog.o \
> rc-leadtek-y04g0051.o \
> rc-lme2510.o \
> + rc-magicbox.o \
> rc-manli.o \
> rc-mecool-kiii-pro.o \
> rc-mecool-kii-pro.o \
> diff --git a/drivers/media/rc/keymaps/rc-magicbox.c b/drivers/media/rc/keymaps/rc-magicbox.c
> new file mode 100644
> index 000000000000..7dd3afd8a42c
> --- /dev/null
> +++ b/drivers/media/rc/keymaps/rc-magicbox.c
> @@ -0,0 +1,55 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// Copyright (C) 2022 Zhang Ning <zhangn1985@qq.com>
> +
> +/*
> + * Keytable for the MagicBox M16S remote control
> + */
> +
> +#include <media/rc-map.h>
> +#include <linux/module.h>
> +
> +
> +static struct rc_map_table magicbox[] = {
> + { 40791, KEY_POWER },
> + { 40842, KEY_MUTE }, // M
This comment needs elaboration. What does M mean?
> + { 40771, KEY_UP },
> + { 40714, KEY_DOWN },
> + { 40710, KEY_LEFT },
> + { 40718, KEY_RIGHT },
> + { 40706, KEY_OK },
> +
> + { 40775, KEY_HOME },
> + { 40783, KEY_BACK },
> + { 40726, KEY_MENU },
> +
> + { 40959, KEY_VOLUMEDOWN },
> + { 40797, KEY_VOLUMEUP },
Please use hex values here, they make much more sense for nec protocol.
> +
Remove blank line.
> +};
> +
> +static struct rc_map_list magicbox_map = {
> + .map = {
> + .scan = magicbox,
> + .size = ARRAY_SIZE(magicbox),
> + .rc_proto = RC_PROTO_NEC,
> + .name = RC_MAP_MAGICBOX,
> + }
> +};
> +
> +static int __init init_rc_map_magicbox(void)
> +{
> + return rc_map_register(&magicbox_map);
> +}
> +
> +static void __exit exit_rc_map_magicbox(void)
> +{
> + rc_map_unregister(&magicbox_map);
> +}
> +
> +module_init(init_rc_map_magicbox)
> +module_exit(exit_rc_map_magicbox)
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Zhang Ning <zhangn1985@qq.com>");
> diff --git a/include/media/rc-map.h b/include/media/rc-map.h
> index 793b54342dff..656217b8e91b 100644
> --- a/include/media/rc-map.h
> +++ b/include/media/rc-map.h
> @@ -277,6 +277,7 @@ struct rc_map *rc_map_get(const char *name);
> #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
> #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
> #define RC_MAP_LME2510 "rc-lme2510"
> +#define RC_MAP_MAGICBOX "rc-magicbox"
> #define RC_MAP_MANLI "rc-manli"
> #define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro"
> #define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro"
You should update Documentation/devicetree/bindings/media/rc.yaml as well.
Thanks,
Sean
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S
@ 2022-07-24 13:44 ` Sean Young
0 siblings, 0 replies; 17+ messages in thread
From: Sean Young @ 2022-07-24 13:44 UTC (permalink / raw)
To: Zhang Ning; +Cc: narmstrong, linux-amlogic, linux-arm-kernel, linux-media
On Sat, Jul 23, 2022 at 11:55:02PM +0800, Zhang Ning wrote:
> Signed-off-by: Zhang Ning <zhangn1985@qq.com>
> ---
> .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++
> drivers/media/rc/keymaps/Makefile | 1 +
> drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++
> include/media/rc-map.h | 1 +
> 4 files changed, 61 insertions(+)
> create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> index 464de73d2f0f..69e72687ac9c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> @@ -34,3 +34,7 @@ ðmac {
> &sdio_pwrseq {
> reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>;
> };
> +
> +&ir {
> + linux,rc-map-name = "rc-magicbox";
> +};
As has been pointed out already, this should go a in a different patch.
> diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
> index f513ff5caf4e..02c1c2150f03 100644
> --- a/drivers/media/rc/keymaps/Makefile
> +++ b/drivers/media/rc/keymaps/Makefile
> @@ -71,6 +71,7 @@ obj-$(CONFIG_RC_MAP) += \
> rc-kworld-plus-tv-analog.o \
> rc-leadtek-y04g0051.o \
> rc-lme2510.o \
> + rc-magicbox.o \
> rc-manli.o \
> rc-mecool-kiii-pro.o \
> rc-mecool-kii-pro.o \
> diff --git a/drivers/media/rc/keymaps/rc-magicbox.c b/drivers/media/rc/keymaps/rc-magicbox.c
> new file mode 100644
> index 000000000000..7dd3afd8a42c
> --- /dev/null
> +++ b/drivers/media/rc/keymaps/rc-magicbox.c
> @@ -0,0 +1,55 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// Copyright (C) 2022 Zhang Ning <zhangn1985@qq.com>
> +
> +/*
> + * Keytable for the MagicBox M16S remote control
> + */
> +
> +#include <media/rc-map.h>
> +#include <linux/module.h>
> +
> +
> +static struct rc_map_table magicbox[] = {
> + { 40791, KEY_POWER },
> + { 40842, KEY_MUTE }, // M
This comment needs elaboration. What does M mean?
> + { 40771, KEY_UP },
> + { 40714, KEY_DOWN },
> + { 40710, KEY_LEFT },
> + { 40718, KEY_RIGHT },
> + { 40706, KEY_OK },
> +
> + { 40775, KEY_HOME },
> + { 40783, KEY_BACK },
> + { 40726, KEY_MENU },
> +
> + { 40959, KEY_VOLUMEDOWN },
> + { 40797, KEY_VOLUMEUP },
Please use hex values here, they make much more sense for nec protocol.
> +
Remove blank line.
> +};
> +
> +static struct rc_map_list magicbox_map = {
> + .map = {
> + .scan = magicbox,
> + .size = ARRAY_SIZE(magicbox),
> + .rc_proto = RC_PROTO_NEC,
> + .name = RC_MAP_MAGICBOX,
> + }
> +};
> +
> +static int __init init_rc_map_magicbox(void)
> +{
> + return rc_map_register(&magicbox_map);
> +}
> +
> +static void __exit exit_rc_map_magicbox(void)
> +{
> + rc_map_unregister(&magicbox_map);
> +}
> +
> +module_init(init_rc_map_magicbox)
> +module_exit(exit_rc_map_magicbox)
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Zhang Ning <zhangn1985@qq.com>");
> diff --git a/include/media/rc-map.h b/include/media/rc-map.h
> index 793b54342dff..656217b8e91b 100644
> --- a/include/media/rc-map.h
> +++ b/include/media/rc-map.h
> @@ -277,6 +277,7 @@ struct rc_map *rc_map_get(const char *name);
> #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
> #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
> #define RC_MAP_LME2510 "rc-lme2510"
> +#define RC_MAP_MAGICBOX "rc-magicbox"
> #define RC_MAP_MANLI "rc-manli"
> #define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro"
> #define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro"
You should update Documentation/devicetree/bindings/media/rc.yaml as well.
Thanks,
Sean
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S
@ 2022-07-24 13:44 ` Sean Young
0 siblings, 0 replies; 17+ messages in thread
From: Sean Young @ 2022-07-24 13:44 UTC (permalink / raw)
To: Zhang Ning; +Cc: narmstrong, linux-amlogic, linux-arm-kernel, linux-media
On Sat, Jul 23, 2022 at 11:55:02PM +0800, Zhang Ning wrote:
> Signed-off-by: Zhang Ning <zhangn1985@qq.com>
> ---
> .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++
> drivers/media/rc/keymaps/Makefile | 1 +
> drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++
> include/media/rc-map.h | 1 +
> 4 files changed, 61 insertions(+)
> create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> index 464de73d2f0f..69e72687ac9c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> @@ -34,3 +34,7 @@ ðmac {
> &sdio_pwrseq {
> reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>;
> };
> +
> +&ir {
> + linux,rc-map-name = "rc-magicbox";
> +};
As has been pointed out already, this should go a in a different patch.
> diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
> index f513ff5caf4e..02c1c2150f03 100644
> --- a/drivers/media/rc/keymaps/Makefile
> +++ b/drivers/media/rc/keymaps/Makefile
> @@ -71,6 +71,7 @@ obj-$(CONFIG_RC_MAP) += \
> rc-kworld-plus-tv-analog.o \
> rc-leadtek-y04g0051.o \
> rc-lme2510.o \
> + rc-magicbox.o \
> rc-manli.o \
> rc-mecool-kiii-pro.o \
> rc-mecool-kii-pro.o \
> diff --git a/drivers/media/rc/keymaps/rc-magicbox.c b/drivers/media/rc/keymaps/rc-magicbox.c
> new file mode 100644
> index 000000000000..7dd3afd8a42c
> --- /dev/null
> +++ b/drivers/media/rc/keymaps/rc-magicbox.c
> @@ -0,0 +1,55 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// Copyright (C) 2022 Zhang Ning <zhangn1985@qq.com>
> +
> +/*
> + * Keytable for the MagicBox M16S remote control
> + */
> +
> +#include <media/rc-map.h>
> +#include <linux/module.h>
> +
> +
> +static struct rc_map_table magicbox[] = {
> + { 40791, KEY_POWER },
> + { 40842, KEY_MUTE }, // M
This comment needs elaboration. What does M mean?
> + { 40771, KEY_UP },
> + { 40714, KEY_DOWN },
> + { 40710, KEY_LEFT },
> + { 40718, KEY_RIGHT },
> + { 40706, KEY_OK },
> +
> + { 40775, KEY_HOME },
> + { 40783, KEY_BACK },
> + { 40726, KEY_MENU },
> +
> + { 40959, KEY_VOLUMEDOWN },
> + { 40797, KEY_VOLUMEUP },
Please use hex values here, they make much more sense for nec protocol.
> +
Remove blank line.
> +};
> +
> +static struct rc_map_list magicbox_map = {
> + .map = {
> + .scan = magicbox,
> + .size = ARRAY_SIZE(magicbox),
> + .rc_proto = RC_PROTO_NEC,
> + .name = RC_MAP_MAGICBOX,
> + }
> +};
> +
> +static int __init init_rc_map_magicbox(void)
> +{
> + return rc_map_register(&magicbox_map);
> +}
> +
> +static void __exit exit_rc_map_magicbox(void)
> +{
> + rc_map_unregister(&magicbox_map);
> +}
> +
> +module_init(init_rc_map_magicbox)
> +module_exit(exit_rc_map_magicbox)
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Zhang Ning <zhangn1985@qq.com>");
> diff --git a/include/media/rc-map.h b/include/media/rc-map.h
> index 793b54342dff..656217b8e91b 100644
> --- a/include/media/rc-map.h
> +++ b/include/media/rc-map.h
> @@ -277,6 +277,7 @@ struct rc_map *rc_map_get(const char *name);
> #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
> #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
> #define RC_MAP_LME2510 "rc-lme2510"
> +#define RC_MAP_MAGICBOX "rc-magicbox"
> #define RC_MAP_MANLI "rc-manli"
> #define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro"
> #define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro"
You should update Documentation/devicetree/bindings/media/rc.yaml as well.
Thanks,
Sean
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S
2022-07-24 13:44 ` Sean Young
@ 2022-07-24 14:36 ` Zhang Ning
-1 siblings, 0 replies; 17+ messages in thread
From: Zhang Ning @ 2022-07-24 14:36 UTC (permalink / raw)
To: Sean Young; +Cc: narmstrong, linux-amlogic, linux-arm-kernel, linux-media
Hi Sean
thank you for review.
I sent v4 before see your review.
On Sun, Jul 24, 2022 at 02:44:28PM +0100, Sean Young wrote:
> On Sat, Jul 23, 2022 at 11:55:02PM +0800, Zhang Ning wrote:
> > Signed-off-by: Zhang Ning <zhangn1985@qq.com>
> > ---
> > .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++
> > drivers/media/rc/keymaps/Makefile | 1 +
> > drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++
> > include/media/rc-map.h | 1 +
> > 4 files changed, 61 insertions(+)
> > create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > index 464de73d2f0f..69e72687ac9c 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > @@ -34,3 +34,7 @@ ðmac {
> > &sdio_pwrseq {
> > reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>;
> > };
> > +
> > +&ir {
> > + linux,rc-map-name = "rc-magicbox";
> > +};
>
> As has been pointed out already, this should go a in a different patch.
already do it in v4
>
> > diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
> > index f513ff5caf4e..02c1c2150f03 100644
> > --- a/drivers/media/rc/keymaps/Makefile
> > +++ b/drivers/media/rc/keymaps/Makefile
> > @@ -71,6 +71,7 @@ obj-$(CONFIG_RC_MAP) += \
> > rc-kworld-plus-tv-analog.o \
> > rc-leadtek-y04g0051.o \
> > rc-lme2510.o \
> > + rc-magicbox.o \
> > rc-manli.o \
> > rc-mecool-kiii-pro.o \
> > rc-mecool-kii-pro.o \
> > diff --git a/drivers/media/rc/keymaps/rc-magicbox.c b/drivers/media/rc/keymaps/rc-magicbox.c
> > new file mode 100644
> > index 000000000000..7dd3afd8a42c
> > --- /dev/null
> > +++ b/drivers/media/rc/keymaps/rc-magicbox.c
> > @@ -0,0 +1,55 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +//
> > +// Copyright (C) 2022 Zhang Ning <zhangn1985@qq.com>
> > +
> > +/*
> > + * Keytable for the MagicBox M16S remote control
> > + */
> > +
> > +#include <media/rc-map.h>
> > +#include <linux/module.h>
> > +
> > +
> > +static struct rc_map_table magicbox[] = {
> > + { 40791, KEY_POWER },
> > + { 40842, KEY_MUTE }, // M
>
> This comment needs elaboration. What does M mean?
this is answered in v4. a key labeled with "M" as Magic key in vendor
OS.
>
> > + { 40771, KEY_UP },
> > + { 40714, KEY_DOWN },
> > + { 40710, KEY_LEFT },
> > + { 40718, KEY_RIGHT },
> > + { 40706, KEY_OK },
> > +
> > + { 40775, KEY_HOME },
> > + { 40783, KEY_BACK },
> > + { 40726, KEY_MENU },
> > +
> > + { 40959, KEY_VOLUMEDOWN },
> > + { 40797, KEY_VOLUMEUP },
>
> Please use hex values here, they make much more sense for nec protocol.
in v4.
>
> > +
>
> Remove blank line.
will do it in v5.
>
> > +};
> > +
> > +static struct rc_map_list magicbox_map = {
> > + .map = {
> > + .scan = magicbox,
> > + .size = ARRAY_SIZE(magicbox),
> > + .rc_proto = RC_PROTO_NEC,
> > + .name = RC_MAP_MAGICBOX,
> > + }
> > +};
> > +
> > +static int __init init_rc_map_magicbox(void)
> > +{
> > + return rc_map_register(&magicbox_map);
> > +}
> > +
> > +static void __exit exit_rc_map_magicbox(void)
> > +{
> > + rc_map_unregister(&magicbox_map);
> > +}
> > +
> > +module_init(init_rc_map_magicbox)
> > +module_exit(exit_rc_map_magicbox)
> > +
> > +MODULE_LICENSE("GPL");
> > +MODULE_AUTHOR("Zhang Ning <zhangn1985@qq.com>");
> > diff --git a/include/media/rc-map.h b/include/media/rc-map.h
> > index 793b54342dff..656217b8e91b 100644
> > --- a/include/media/rc-map.h
> > +++ b/include/media/rc-map.h
> > @@ -277,6 +277,7 @@ struct rc_map *rc_map_get(const char *name);
> > #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
> > #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
> > #define RC_MAP_LME2510 "rc-lme2510"
> > +#define RC_MAP_MAGICBOX "rc-magicbox"
> > #define RC_MAP_MANLI "rc-manli"
> > #define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro"
> > #define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro"
>
> You should update Documentation/devicetree/bindings/media/rc.yaml as well.
alread do it in v4.
>
> Thanks,
>
> Sean
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S
@ 2022-07-24 14:36 ` Zhang Ning
0 siblings, 0 replies; 17+ messages in thread
From: Zhang Ning @ 2022-07-24 14:36 UTC (permalink / raw)
To: Sean Young; +Cc: narmstrong, linux-amlogic, linux-arm-kernel, linux-media
Hi Sean
thank you for review.
I sent v4 before see your review.
On Sun, Jul 24, 2022 at 02:44:28PM +0100, Sean Young wrote:
> On Sat, Jul 23, 2022 at 11:55:02PM +0800, Zhang Ning wrote:
> > Signed-off-by: Zhang Ning <zhangn1985@qq.com>
> > ---
> > .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++
> > drivers/media/rc/keymaps/Makefile | 1 +
> > drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++
> > include/media/rc-map.h | 1 +
> > 4 files changed, 61 insertions(+)
> > create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > index 464de73d2f0f..69e72687ac9c 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > @@ -34,3 +34,7 @@ ðmac {
> > &sdio_pwrseq {
> > reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>;
> > };
> > +
> > +&ir {
> > + linux,rc-map-name = "rc-magicbox";
> > +};
>
> As has been pointed out already, this should go a in a different patch.
already do it in v4
>
> > diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
> > index f513ff5caf4e..02c1c2150f03 100644
> > --- a/drivers/media/rc/keymaps/Makefile
> > +++ b/drivers/media/rc/keymaps/Makefile
> > @@ -71,6 +71,7 @@ obj-$(CONFIG_RC_MAP) += \
> > rc-kworld-plus-tv-analog.o \
> > rc-leadtek-y04g0051.o \
> > rc-lme2510.o \
> > + rc-magicbox.o \
> > rc-manli.o \
> > rc-mecool-kiii-pro.o \
> > rc-mecool-kii-pro.o \
> > diff --git a/drivers/media/rc/keymaps/rc-magicbox.c b/drivers/media/rc/keymaps/rc-magicbox.c
> > new file mode 100644
> > index 000000000000..7dd3afd8a42c
> > --- /dev/null
> > +++ b/drivers/media/rc/keymaps/rc-magicbox.c
> > @@ -0,0 +1,55 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +//
> > +// Copyright (C) 2022 Zhang Ning <zhangn1985@qq.com>
> > +
> > +/*
> > + * Keytable for the MagicBox M16S remote control
> > + */
> > +
> > +#include <media/rc-map.h>
> > +#include <linux/module.h>
> > +
> > +
> > +static struct rc_map_table magicbox[] = {
> > + { 40791, KEY_POWER },
> > + { 40842, KEY_MUTE }, // M
>
> This comment needs elaboration. What does M mean?
this is answered in v4. a key labeled with "M" as Magic key in vendor
OS.
>
> > + { 40771, KEY_UP },
> > + { 40714, KEY_DOWN },
> > + { 40710, KEY_LEFT },
> > + { 40718, KEY_RIGHT },
> > + { 40706, KEY_OK },
> > +
> > + { 40775, KEY_HOME },
> > + { 40783, KEY_BACK },
> > + { 40726, KEY_MENU },
> > +
> > + { 40959, KEY_VOLUMEDOWN },
> > + { 40797, KEY_VOLUMEUP },
>
> Please use hex values here, they make much more sense for nec protocol.
in v4.
>
> > +
>
> Remove blank line.
will do it in v5.
>
> > +};
> > +
> > +static struct rc_map_list magicbox_map = {
> > + .map = {
> > + .scan = magicbox,
> > + .size = ARRAY_SIZE(magicbox),
> > + .rc_proto = RC_PROTO_NEC,
> > + .name = RC_MAP_MAGICBOX,
> > + }
> > +};
> > +
> > +static int __init init_rc_map_magicbox(void)
> > +{
> > + return rc_map_register(&magicbox_map);
> > +}
> > +
> > +static void __exit exit_rc_map_magicbox(void)
> > +{
> > + rc_map_unregister(&magicbox_map);
> > +}
> > +
> > +module_init(init_rc_map_magicbox)
> > +module_exit(exit_rc_map_magicbox)
> > +
> > +MODULE_LICENSE("GPL");
> > +MODULE_AUTHOR("Zhang Ning <zhangn1985@qq.com>");
> > diff --git a/include/media/rc-map.h b/include/media/rc-map.h
> > index 793b54342dff..656217b8e91b 100644
> > --- a/include/media/rc-map.h
> > +++ b/include/media/rc-map.h
> > @@ -277,6 +277,7 @@ struct rc_map *rc_map_get(const char *name);
> > #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
> > #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
> > #define RC_MAP_LME2510 "rc-lme2510"
> > +#define RC_MAP_MAGICBOX "rc-magicbox"
> > #define RC_MAP_MANLI "rc-manli"
> > #define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro"
> > #define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro"
>
> You should update Documentation/devicetree/bindings/media/rc.yaml as well.
alread do it in v4.
>
> Thanks,
>
> Sean
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2022-07-24 14:38 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20220723155502.127404-1-zhangn1985@qq.com>
2022-07-23 15:55 ` [PATCH 1/2] dts/amlogic: Add MagicBox M16S support Zhang Ning
2022-07-23 15:55 ` Zhang Ning
2022-07-23 20:14 ` Martin Blumenstingl
2022-07-23 20:14 ` Martin Blumenstingl
2022-07-23 20:14 ` Martin Blumenstingl
2022-07-23 23:22 ` Zhang Ning
2022-07-23 23:22 ` Zhang Ning
2022-07-23 15:55 ` [PATCH 2/2] rc/keymap: add keymap for MagicBox M16S Zhang Ning
2022-07-23 15:55 ` Zhang Ning
2022-07-23 20:05 ` Martin Blumenstingl
2022-07-23 20:05 ` Martin Blumenstingl
2022-07-23 20:05 ` Martin Blumenstingl
2022-07-24 13:44 ` Sean Young
2022-07-24 13:44 ` Sean Young
2022-07-24 13:44 ` Sean Young
2022-07-24 14:36 ` Zhang Ning
2022-07-24 14:36 ` Zhang Ning
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.