* [tip:x86/xsave] x86, xsave: remove unused code
@ 2011-04-06 22:05 tip-bot for Hans Rosenfeld
0 siblings, 0 replies; only message in thread
From: tip-bot for Hans Rosenfeld @ 2011-04-06 22:05 UTC (permalink / raw)
To: linux-tip-commits; +Cc: linux-kernel, hans.rosenfeld, hpa, mingo, tglx, hpa
Commit-ID: 2efd67935eb7aa6ee4c124e7315d964245a1bfe8
Gitweb: http://git.kernel.org/tip/2efd67935eb7aa6ee4c124e7315d964245a1bfe8
Author: Hans Rosenfeld <hans.rosenfeld@amd.com>
AuthorDate: Tue, 5 Apr 2011 17:50:52 +0200
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 6 Apr 2011 14:15:18 -0700
x86, xsave: remove unused code
The patches to rework the fpu/xsave handling and signal frame setup have
made a lot of code unused. This patch removes all this now useless stuff.
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Link: http://lkml.kernel.org/r/1302018656-586370-5-git-send-email-hans.rosenfeld@amd.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
arch/x86/include/asm/i387.h | 155 ++----------------------------
arch/x86/include/asm/xsave.h | 51 ----------
arch/x86/kernel/i387.c | 221 ------------------------------------------
arch/x86/kernel/traps.c | 22 ----
arch/x86/kernel/xsave.c | 163 -------------------------------
5 files changed, 7 insertions(+), 605 deletions(-)
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index fc716bc..75c0800 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -29,8 +29,6 @@
# include <asm/sigcontext32.h>
# include <asm/user32.h>
#else
-# define save_i387_xstate_ia32 save_i387_xstate
-# define restore_i387_xstate_ia32 restore_i387_xstate
# define _fpstate_ia32 _fpstate
# define _xstate_ia32 _xstate
# define sig_xstate_ia32_size sig_xstate_size
@@ -108,75 +106,16 @@ static inline void sanitize_i387_state(struct task_struct *tsk)
}
#ifdef CONFIG_X86_64
-static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
+static inline void fxrstor(struct i387_fxsave_struct *fx)
{
- int err;
-
- /* See comment in fxsave() below. */
-#ifdef CONFIG_AS_FXSAVEQ
- asm volatile("1: fxrstorq %[fx]\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl $-1,%[err]\n"
- " jmp 2b\n"
- ".previous\n"
- _ASM_EXTABLE(1b, 3b)
- : [err] "=r" (err)
- : [fx] "m" (*fx), "0" (0));
-#else
- asm volatile("1: rex64/fxrstor (%[fx])\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl $-1,%[err]\n"
- " jmp 2b\n"
- ".previous\n"
- _ASM_EXTABLE(1b, 3b)
- : [err] "=r" (err)
- : [fx] "R" (fx), "m" (*fx), "0" (0));
-#endif
- return err;
-}
-
-static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
-{
- int err;
-
- /*
- * Clear the bytes not touched by the fxsave and reserved
- * for the SW usage.
- */
- err = __clear_user(&fx->sw_reserved,
- sizeof(struct _fpx_sw_bytes));
- if (unlikely(err))
- return -EFAULT;
-
/* See comment in fxsave() below. */
#ifdef CONFIG_AS_FXSAVEQ
- asm volatile("1: fxsaveq %[fx]\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl $-1,%[err]\n"
- " jmp 2b\n"
- ".previous\n"
- _ASM_EXTABLE(1b, 3b)
- : [err] "=r" (err), [fx] "=m" (*fx)
- : "0" (0));
+ asm volatile("fxrstorq %[fx]\n\t"
+ : : [fx] "m" (*fx));
#else
- asm volatile("1: rex64/fxsave (%[fx])\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl $-1,%[err]\n"
- " jmp 2b\n"
- ".previous\n"
- _ASM_EXTABLE(1b, 3b)
- : [err] "=r" (err), "=m" (*fx)
- : [fx] "R" (fx), "0" (0));
+ asm volatile("rex64/fxrstor (%[fx])\n\t"
+ : : [fx] "R" (fx), "m" (*fx));
#endif
- if (unlikely(err) &&
- __clear_user(fx, sizeof(struct i387_fxsave_struct)))
- err = -EFAULT;
- /* No need to clear here because the caller clears USED_MATH */
- return err;
}
static inline void fpu_fxsave(struct fpu *fpu)
@@ -209,7 +148,7 @@ static inline void fpu_fxsave(struct fpu *fpu)
#else /* CONFIG_X86_32 */
/* perform fxrstor iff the processor has extended states, otherwise frstor */
-static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
+static inline void fxrstor(struct i387_fxsave_struct *fx)
{
/*
* The "nop" is needed to make the instructions the same
@@ -220,8 +159,6 @@ static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
"fxrstor %1",
X86_FEATURE_FXSR,
"m" (*fx));
-
- return 0;
}
static inline void fpu_fxsave(struct fpu *fpu)
@@ -246,7 +183,7 @@ static inline void fpu_fxsave(struct fpu *fpu)
*/
static inline void fpu_restore(struct fpu *fpu)
{
- fxrstor_checking(&fpu->state->fxsave);
+ fxrstor(&fpu->state->fxsave);
}
static inline void fpu_save(struct fpu *fpu)
@@ -278,69 +215,6 @@ static inline void fpu_clean(struct fpu *fpu)
[addr] "m" (safe_address));
}
-static inline void fpu_save_init(struct fpu *fpu)
-{
- if (use_xsave()) {
- struct xsave_struct *xstate = &fpu->state->xsave;
-
- fpu_xsave(xstate, -1);
-
- /*
- * xsave header may indicate the init state of the FP.
- */
- if (!(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
- return;
- } else if (use_fxsr()) {
- fpu_fxsave(fpu);
- } else {
- asm volatile("fsave %[fx]; fwait"
- : [fx] "=m" (fpu->state->fsave));
- return;
- }
-
- if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES))
- asm volatile("fnclex");
-
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- ASM_NOP8 ASM_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %P[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
-}
-
-static inline void __save_init_fpu(struct task_struct *tsk)
-{
- fpu_save_init(&tsk->thread.fpu);
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
-}
-
-static inline int fpu_restore_checking(struct fpu *fpu)
-{
- if (use_xsave())
- return xrstor_checking(&fpu->state->xsave, -1);
- else
- return fxrstor_checking(&fpu->state->fxsave);
-}
-
-/*
- * Signal frame handlers...
- */
-extern int save_i387_xstate(void __user *buf);
-extern int restore_i387_xstate(void __user *buf);
-
-static inline void __unlazy_fpu(struct task_struct *tsk)
-{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- __save_init_fpu(tsk);
- stts();
- } else
- tsk->fpu_counter = 0;
-}
-
static inline void __clear_fpu(struct task_struct *tsk)
{
if (task_thread_info(tsk)->status & TS_USEDFPU) {
@@ -409,21 +283,6 @@ static inline void irq_ts_restore(int TS_state)
/*
* These disable preemption on their own and are safe
*/
-static inline void save_init_fpu(struct task_struct *tsk)
-{
- preempt_disable();
- __save_init_fpu(tsk);
- stts();
- preempt_enable();
-}
-
-static inline void unlazy_fpu(struct task_struct *tsk)
-{
- preempt_disable();
- __unlazy_fpu(tsk);
- preempt_enable();
-}
-
static inline void clear_fpu(struct task_struct *tsk)
{
preempt_disable();
diff --git a/arch/x86/include/asm/xsave.h b/arch/x86/include/asm/xsave.h
index 200c56d..742da4a 100644
--- a/arch/x86/include/asm/xsave.h
+++ b/arch/x86/include/asm/xsave.h
@@ -51,26 +51,6 @@ extern int check_for_xstate(struct i387_fxsave_struct __user *buf,
unsigned int size,
struct _fpx_sw_bytes *sw);
-static inline int xrstor_checking(struct xsave_struct *fx, u64 mask)
-{
- int err;
- u32 lmask = mask;
- u32 hmask = mask >> 32;
-
- asm volatile("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl $-1,%[err]\n"
- " jmp 2b\n"
- ".previous\n"
- _ASM_EXTABLE(1b, 3b)
- : [err] "=r" (err)
- : "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask), "0" (0)
- : "memory");
-
- return err;
-}
-
static inline void xrstor_state(struct xsave_struct *fx, u64 mask)
{
u32 lmask = mask;
@@ -81,37 +61,6 @@ static inline void xrstor_state(struct xsave_struct *fx, u64 mask)
: "memory");
}
-static inline int xsave_checking(struct xsave_struct __user *buf)
-{
- int err;
-
- /*
- * Clear the xsave header first, so that reserved fields are
- * initialized to zero.
- */
- err = __clear_user(&buf->xsave_hdr,
- sizeof(struct xsave_hdr_struct));
- if (unlikely(err))
- return -EFAULT;
-
- asm volatile("1: .byte " REX_PREFIX "0x0f,0xae,0x27\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl $-1,%[err]\n"
- " jmp 2b\n"
- ".previous\n"
- _ASM_EXTABLE(1b,3b)
- : [err] "=r" (err)
- : "D" (buf), "a" (-1), "d" (-1), "0" (0)
- : "memory");
-
- if (unlikely(err) && __clear_user(buf, xstate_size))
- err = -EFAULT;
-
- /* No need to clear here because the caller clears USED_MATH */
- return err;
-}
-
static inline void xsave_state(struct xsave_struct *fx, u64 mask)
{
u32 lmask = mask;
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 69625a8..ca33c0b 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -490,227 +490,6 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
}
/*
- * Signal frame handlers.
- */
-
-static inline int save_i387_fsave(struct _fpstate_ia32 __user *buf)
-{
- struct task_struct *tsk = current;
- struct i387_fsave_struct *fp = &tsk->thread.fpu.state->fsave;
-
- fp->status = fp->swd;
- if (__copy_to_user(buf, fp, sizeof(struct i387_fsave_struct)))
- return -1;
- return 1;
-}
-
-static int save_i387_fxsave(struct _fpstate_ia32 __user *buf)
-{
- struct task_struct *tsk = current;
- struct i387_fxsave_struct *fx = &tsk->thread.fpu.state->fxsave;
- struct user_i387_ia32_struct env;
- int err = 0;
-
- convert_from_fxsr(&env, tsk);
- if (__copy_to_user(buf, &env, sizeof(env)))
- return -1;
-
- err |= __put_user(fx->swd, &buf->status);
- err |= __put_user(X86_FXSR_MAGIC, &buf->magic);
- if (err)
- return -1;
-
- if (__copy_to_user(&buf->_fxsr_env[0], fx, xstate_size))
- return -1;
- return 1;
-}
-
-static int save_i387_xsave(void __user *buf)
-{
- struct task_struct *tsk = current;
- struct _fpstate_ia32 __user *fx = buf;
- int err = 0;
-
-
- sanitize_i387_state(tsk);
-
- /*
- * For legacy compatible, we always set FP/SSE bits in the bit
- * vector while saving the state to the user context.
- * This will enable us capturing any changes(during sigreturn) to
- * the FP/SSE bits by the legacy applications which don't touch
- * xstate_bv in the xsave header.
- *
- * xsave aware applications can change the xstate_bv in the xsave
- * header as well as change any contents in the memory layout.
- * xrestore as part of sigreturn will capture all the changes.
- */
- tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
-
- if (save_i387_fxsave(fx) < 0)
- return -1;
-
- err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved_ia32,
- sizeof(struct _fpx_sw_bytes));
- err |= __put_user(FP_XSTATE_MAGIC2,
- (__u32 __user *) (buf + sig_xstate_ia32_size
- - FP_XSTATE_MAGIC2_SIZE));
- if (err)
- return -1;
-
- return 1;
-}
-
-int save_i387_xstate_ia32(void __user *buf)
-{
- struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf;
- struct task_struct *tsk = current;
-
- if (!used_math())
- return 0;
-
- if (!access_ok(VERIFY_WRITE, buf, sig_xstate_ia32_size))
- return -EACCES;
- /*
- * This will cause a "finit" to be triggered by the next
- * attempted FPU operation by the 'current' process.
- */
- clear_used_math();
-
- if (!HAVE_HWFP) {
- return fpregs_soft_get(current, NULL,
- 0, sizeof(struct user_i387_ia32_struct),
- NULL, fp) ? -1 : 1;
- }
-
- preempt_disable();
- save_xstates(tsk);
- preempt_enable();
-
- if (cpu_has_xsave)
- return save_i387_xsave(fp);
- if (cpu_has_fxsr)
- return save_i387_fxsave(fp);
- else
- return save_i387_fsave(fp);
-}
-
-static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf)
-{
- struct task_struct *tsk = current;
-
- return __copy_from_user(&tsk->thread.fpu.state->fsave, buf,
- sizeof(struct i387_fsave_struct));
-}
-
-static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf,
- unsigned int size)
-{
- struct task_struct *tsk = current;
- struct user_i387_ia32_struct env;
- int err;
-
- err = __copy_from_user(&tsk->thread.fpu.state->fxsave, &buf->_fxsr_env[0],
- size);
- /* mxcsr reserved bits must be masked to zero for security reasons */
- tsk->thread.fpu.state->fxsave.mxcsr &= mxcsr_feature_mask;
- if (err || __copy_from_user(&env, buf, sizeof(env)))
- return 1;
- convert_to_fxsr(tsk, &env);
-
- return 0;
-}
-
-static int restore_i387_xsave(void __user *buf)
-{
- struct _fpx_sw_bytes fx_sw_user;
- struct _fpstate_ia32 __user *fx_user =
- ((struct _fpstate_ia32 __user *) buf);
- struct i387_fxsave_struct __user *fx =
- (struct i387_fxsave_struct __user *) &fx_user->_fxsr_env[0];
- struct xsave_hdr_struct *xsave_hdr =
- ¤t->thread.fpu.state->xsave.xsave_hdr;
- u64 mask;
- int err;
-
- if (check_for_xstate(fx, sig_xstate_ia32_size -
- offsetof(struct _fpstate_ia32, _fxsr_env),
- &fx_sw_user))
- goto fx_only;
-
- mask = fx_sw_user.xstate_bv;
-
- err = restore_i387_fxsave(buf, fx_sw_user.xstate_size);
-
- xsave_hdr->xstate_bv &= pcntxt_mask;
- /*
- * These bits must be zero.
- */
- xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0;
-
- /*
- * Init the state that is not present in the memory layout
- * and enabled by the OS.
- */
- mask = ~(pcntxt_mask & ~mask);
- xsave_hdr->xstate_bv &= mask;
-
- return err;
-fx_only:
- /*
- * Couldn't find the extended state information in the memory
- * layout. Restore the FP/SSE and init the other extended state
- * enabled by the OS.
- */
- xsave_hdr->xstate_bv = XSTATE_FPSSE;
- return restore_i387_fxsave(buf, sizeof(struct i387_fxsave_struct));
-}
-
-int restore_i387_xstate_ia32(void __user *buf)
-{
- int err;
- struct task_struct *tsk = current;
- struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf;
-
- if (HAVE_HWFP)
- clear_fpu(tsk);
-
- if (!buf) {
- if (used_math()) {
- clear_fpu(tsk);
- clear_used_math();
- }
-
- return 0;
- } else
- if (!access_ok(VERIFY_READ, buf, sig_xstate_ia32_size))
- return -EACCES;
-
- if (!used_math()) {
- err = init_fpu(tsk);
- if (err)
- return err;
- }
-
- if (HAVE_HWFP) {
- if (cpu_has_xsave)
- err = restore_i387_xsave(buf);
- else if (cpu_has_fxsr)
- err = restore_i387_fxsave(fp, sizeof(struct
- i387_fxsave_struct));
- else
- err = restore_i387_fsave(fp);
- } else {
- err = fpregs_soft_set(current, NULL,
- 0, sizeof(struct user_i387_ia32_struct),
- NULL, fp) != 0;
- }
- set_used_math();
-
- return err;
-}
-
-/*
* FPU state for core dumps.
* This is only used for a.out dumps now.
* It is declared generically using elf_fpregset_t (which is
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 072c30e..872fc78 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -720,28 +720,6 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
}
/*
- * __math_state_restore assumes that cr0.TS is already clear and the
- * fpu state is all ready for use. Used during context switch.
- */
-void __math_state_restore(void)
-{
- struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = thread->task;
-
- /*
- * Paranoid restore. send a SIGSEGV if we fail to restore the state.
- */
- if (unlikely(fpu_restore_checking(&tsk->thread.fpu))) {
- stts();
- force_sig(SIGSEGV, tsk);
- return;
- }
-
- thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
- tsk->fpu_counter++;
-}
-
-/*
* 'math_state_restore()' saves the current math information in the
* old math state array, and gets the new ones from the current task
*
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 08b2fe8..9ecc791 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -249,169 +249,6 @@ int save_xstates_sigframe(void __user *buf, unsigned int size)
return 1;
}
-#ifdef CONFIG_X86_64
-int save_i387_xstate(void __user *buf)
-{
- struct task_struct *tsk = current;
- int err = 0;
-
- if (!access_ok(VERIFY_WRITE, buf, sig_xstate_size))
- return -EACCES;
-
- BUG_ON(sig_xstate_size < xstate_size);
-
- if ((unsigned long)buf % 64)
- printk("save_i387_xstate: bad fpstate %p\n", buf);
-
- if (!used_math())
- return 0;
-
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- if (use_xsave())
- err = xsave_checking(buf);
- else
- err = fxsave_user(buf);
-
- if (err)
- return err;
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
- } else {
- sanitize_i387_state(tsk);
- if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
- xstate_size))
- return -1;
- }
-
- clear_used_math(); /* trigger finit */
-
- if (use_xsave()) {
- struct _fpstate __user *fx = buf;
- struct _xstate __user *x = buf;
- u64 xstate_bv;
-
- err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved,
- sizeof(struct _fpx_sw_bytes));
-
- err |= __put_user(FP_XSTATE_MAGIC2,
- (__u32 __user *) (buf + sig_xstate_size
- - FP_XSTATE_MAGIC2_SIZE));
-
- /*
- * Read the xstate_bv which we copied (directly from the cpu or
- * from the state in task struct) to the user buffers and
- * set the FP/SSE bits.
- */
- err |= __get_user(xstate_bv, &x->xstate_hdr.xstate_bv);
-
- /*
- * For legacy compatible, we always set FP/SSE bits in the bit
- * vector while saving the state to the user context. This will
- * enable us capturing any changes(during sigreturn) to
- * the FP/SSE bits by the legacy applications which don't touch
- * xstate_bv in the xsave header.
- *
- * xsave aware apps can change the xstate_bv in the xsave
- * header as well as change any contents in the memory layout.
- * xrestore as part of sigreturn will capture all the changes.
- */
- xstate_bv |= XSTATE_FPSSE;
-
- err |= __put_user(xstate_bv, &x->xstate_hdr.xstate_bv);
-
- if (err)
- return err;
- }
-
- return 1;
-}
-
-/*
- * Restore the extended state if present. Otherwise, restore the FP/SSE
- * state.
- */
-static int restore_user_xstate(void __user *buf)
-{
- struct _fpx_sw_bytes fx_sw_user;
- u64 mask;
- int err;
-
- if (((unsigned long)buf % 64) ||
- check_for_xstate(buf, sig_xstate_size, &fx_sw_user))
- goto fx_only;
-
- mask = fx_sw_user.xstate_bv;
-
- /*
- * restore the state passed by the user.
- */
- err = xrstor_checking((__force struct xsave_struct *)buf, mask);
- if (err)
- return err;
-
- /*
- * init the state skipped by the user.
- */
- mask = pcntxt_mask & ~mask;
- if (unlikely(mask))
- xrstor_state(init_xstate_buf, mask);
-
- return 0;
-
-fx_only:
- /*
- * couldn't find the extended state information in the
- * memory layout. Restore just the FP/SSE and init all
- * the other extended state.
- */
- xrstor_state(init_xstate_buf, pcntxt_mask & ~XSTATE_FPSSE);
- return fxrstor_checking((__force struct i387_fxsave_struct *)buf);
-}
-
-/*
- * This restores directly out of user space. Exceptions are handled.
- */
-int restore_i387_xstate(void __user *buf)
-{
- struct task_struct *tsk = current;
- int err = 0;
-
- if (!buf) {
- if (used_math())
- goto clear;
- return 0;
- } else
- if (!access_ok(VERIFY_READ, buf, sig_xstate_size))
- return -EACCES;
-
- if (!used_math()) {
- err = init_fpu(tsk);
- if (err)
- return err;
- }
-
- if (!(task_thread_info(current)->status & TS_USEDFPU)) {
- clts();
- task_thread_info(current)->status |= TS_USEDFPU;
- }
- if (use_xsave())
- err = restore_user_xstate(buf);
- else
- err = fxrstor_checking((__force struct i387_fxsave_struct *)
- buf);
- if (unlikely(err)) {
- /*
- * Encountered an error while doing the restore from the
- * user buffer, clear the fpu state.
- */
-clear:
- clear_fpu(tsk);
- clear_used_math();
- }
- return err;
-}
-#endif
-
int restore_xstates_sigframe(void __user *buf, unsigned int size)
{
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2011-04-06 22:05 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-04-06 22:05 [tip:x86/xsave] x86, xsave: remove unused code tip-bot for Hans Rosenfeld
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.