[PATCH] x86: clean up output resulting from update_mptable option

[PATCH] x86: clean up output resulting from update_mptable option

[Jan Beulich]

Impact: cleanup

Without apic=verbose, using the update_mptable option would result in
garbled and confusing output due to the inconsistent use of printk() vs
apic_printk().

Signed-off-by: Jan Beulich <jbeulich@novell.com>

---
 arch/x86/kernel/mpparse.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- linux-2.6.29-rc7/arch/x86/kernel/mpparse.c	2009-03-04 09:10:19.000000000 +0100
+++ 2.6.29-rc7-x86-update-mptable/arch/x86/kernel/mpparse.c	2009-03-06 11:07:34.000000000 +0100
@@ -876,12 +876,12 @@ static int  __init replace_intsrc_all(st
 #ifdef CONFIG_X86_IO_APIC
 				struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
 
-				printk(KERN_INFO "OLD ");
+				apic_printk(APIC_VERBOSE, "OLD ");
 				print_MP_intsrc_info(m);
 				i = get_MP_intsrc_index(m);
 				if (i > 0) {
 					assign_to_mpc_intsrc(&mp_irqs[i], m);
-					printk(KERN_INFO "NEW ");
+					apic_printk(APIC_VERBOSE, "NEW ");
 					print_mp_irq_info(&mp_irqs[i]);
 				} else if (!i) {
 					/* legacy, do nothing */
@@ -929,7 +929,7 @@ static int  __init replace_intsrc_all(st
 			continue;
 
 		if (nr_m_spare > 0) {
-			printk(KERN_INFO "*NEW* found ");
+			apic_printk(APIC_VERBOSE, "*NEW* found\n");
 			nr_m_spare--;
 			assign_to_mpc_intsrc(&mp_irqs[i], m_spare[nr_m_spare]);
 			m_spare[nr_m_spare] = NULL;

[tip:x86/mm] x86: clean up output resulting from update_mptable option

[Jan Beulich]

Commit-ID:  82034d6f59b4772f4233bbb61c670290803a9960
Gitweb:     http://git.kernel.org/tip/82034d6f59b4772f4233bbb61c670290803a9960
Author:     Jan Beulich <jbeulich@novell.com>
AuthorDate: Thu, 12 Mar 2009 12:57:10 +0000
Commit:     Ingo Molnar <mingo@elte.hu>
CommitDate: Fri, 13 Mar 2009 02:37:19 +0100

x86: clean up output resulting from update_mptable option

Impact: cleanup

Without apic=verbose, using the update_mptable option would result in
garbled and confusing output due to the inconsistent use of printk() vs
apic_printk().

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49B914B6.76E4.0078.0@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>


---
 arch/x86/kernel/mpparse.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index e819240..47673e0 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -890,12 +890,12 @@ static int  __init replace_intsrc_all(struct mpc_table *mpc,
 #ifdef CONFIG_X86_IO_APIC
 				struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
 
-				printk(KERN_INFO "OLD ");
+				apic_printk(APIC_VERBOSE, "OLD ");
 				print_MP_intsrc_info(m);
 				i = get_MP_intsrc_index(m);
 				if (i > 0) {
 					assign_to_mpc_intsrc(&mp_irqs[i], m);
-					printk(KERN_INFO "NEW ");
+					apic_printk(APIC_VERBOSE, "NEW ");
 					print_mp_irq_info(&mp_irqs[i]);
 				} else if (!i) {
 					/* legacy, do nothing */
@@ -943,7 +943,7 @@ static int  __init replace_intsrc_all(struct mpc_table *mpc,
 			continue;
 
 		if (nr_m_spare > 0) {
-			printk(KERN_INFO "*NEW* found ");
+			apic_printk(APIC_VERBOSE, "*NEW* found\n");
 			nr_m_spare--;
 			assign_to_mpc_intsrc(&mp_irqs[i], m_spare[nr_m_spare]);
 			m_spare[nr_m_spare] = NULL;

[PATCH] x86: fix e820_update_range()

[Yinghai Lu]

Impact: fix left range size on head.

| commit 5c0e6f035df983210e4d22213aed624ced502d3d
|    x86: fix code paths used by update_mptable
|    Impact: fix crashes under Xen due to unrobust e820 code
fix one bug about e820 referring, but introduce other bug

need update size for left range at first in case it is header.

also add __e820_add_region take more parameter.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/kernel/e820.c |   45 ++++++++++++++++++++++++---------------------
 1 file changed, 24 insertions(+), 21 deletions(-)

Index: linux-2.6/arch/x86/kernel/e820.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/e820.c
+++ linux-2.6/arch/x86/kernel/e820.c
@@ -110,19 +110,25 @@ int __init e820_all_mapped(u64 start, u6
 /*
  * Add a memory region to the kernel e820 map.
  */
-void __init e820_add_region(u64 start, u64 size, int type)
+static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size,
+					 int type)
 {
-	int x = e820.nr_map;
+	int x = e820x->nr_map;
 
-	if (x == ARRAY_SIZE(e820.map)) {
+	if (x == ARRAY_SIZE(e820x->map)) {
 		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
 		return;
 	}
 
-	e820.map[x].addr = start;
-	e820.map[x].size = size;
-	e820.map[x].type = type;
-	e820.nr_map++;
+	e820x->map[x].addr = start;
+	e820x->map[x].size = size;
+	e820x->map[x].type = type;
+	e820x->nr_map++;
+}
+
+void __init e820_add_region(u64 start, u64 size, int type)
+{
+	__e820_add_region(&e820, start, size, type);
 }
 
 void __init e820_print_map(char *who)
@@ -417,11 +423,11 @@ static int __init append_e820_map(struct
 	return __append_e820_map(biosmap, nr_map);
 }
 
-static u64 __init e820_update_range_map(struct e820map *e820x, u64 start,
+static u64 __init __e820_update_range(struct e820map *e820x, u64 start,
 					u64 size, unsigned old_type,
 					unsigned new_type)
 {
-	unsigned int i, x;
+	unsigned int i;
 	u64 real_updated_size = 0;
 
 	BUG_ON(old_type == new_type);
@@ -447,22 +453,19 @@ static u64 __init e820_update_range_map(
 		if (final_start >= final_end)
 			continue;
 
-		x = e820x->nr_map;
-		if (x == ARRAY_SIZE(e820x->map)) {
-			printk(KERN_ERR "Too many memory map entries!\n");
-			break;
-		}
-		e820x->map[x].addr = final_start;
-		e820x->map[x].size = final_end - final_start;
-		e820x->map[x].type = new_type;
-		e820x->nr_map++;
+		__e820_add_region(e820x, final_start, final_end - final_start,
+				  new_type);
 
 		real_updated_size += final_end - final_start;
 
+		/*
+		 * left range could be head or tail, so need to update
+		 * size at first.
+		 */
+		ei->size -= final_end - final_start;
 		if (ei->addr < final_start)
 			continue;
 		ei->addr = final_end;
-		ei->size -= final_end - final_start;
 	}
 	return real_updated_size;
 }
@@ -470,13 +473,13 @@ static u64 __init e820_update_range_map(
 u64 __init e820_update_range(u64 start, u64 size, unsigned old_type,
 			     unsigned new_type)
 {
-	return e820_update_range_map(&e820, start, size, old_type, new_type);
+	return __e820_update_range(&e820, start, size, old_type, new_type);
 }
 
 static u64 __init e820_update_range_saved(u64 start, u64 size,
 					  unsigned old_type, unsigned new_type)
 {
-	return e820_update_range_map(&e820_saved, start, size, old_type,
+	return __e820_update_range(&e820_saved, start, size, old_type,
 				     new_type);
 }
 

[tip:x86/mm] x86: fix e820_update_range()

[Yinghai Lu]

Commit-ID:  773e673de27297d07d852e7e9bfd1a695cae1da2
Gitweb:     http://git.kernel.org/tip/773e673de27297d07d852e7e9bfd1a695cae1da2
Author:     Yinghai Lu <yinghai@kernel.org>
AuthorDate: Thu, 12 Mar 2009 21:35:18 -0700
Commit:     Ingo Molnar <mingo@elte.hu>
CommitDate: Fri, 13 Mar 2009 05:38:29 +0100

x86: fix e820_update_range()

Impact: fix left range size on head

| commit 5c0e6f035df983210e4d22213aed624ced502d3d
|    x86: fix code paths used by update_mptable
|    Impact: fix crashes under Xen due to unrobust e820 code

fixes one e820 bug, but introduces another bug.

Need to update size for left range at first in case it is header.

also add __e820_add_region take more parameter.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: jbeulich@novell.com
LKML-Reference: <49B9E286.502@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>


---
 arch/x86/kernel/e820.c |   45 ++++++++++++++++++++++++---------------------
 1 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 3cf6681..95b81c1 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -110,19 +110,25 @@ int __init e820_all_mapped(u64 start, u64 end, unsigned type)
 /*
  * Add a memory region to the kernel e820 map.
  */
-void __init e820_add_region(u64 start, u64 size, int type)
+static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size,
+					 int type)
 {
-	int x = e820.nr_map;
+	int x = e820x->nr_map;
 
-	if (x == ARRAY_SIZE(e820.map)) {
+	if (x == ARRAY_SIZE(e820x->map)) {
 		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
 		return;
 	}
 
-	e820.map[x].addr = start;
-	e820.map[x].size = size;
-	e820.map[x].type = type;
-	e820.nr_map++;
+	e820x->map[x].addr = start;
+	e820x->map[x].size = size;
+	e820x->map[x].type = type;
+	e820x->nr_map++;
+}
+
+void __init e820_add_region(u64 start, u64 size, int type)
+{
+	__e820_add_region(&e820, start, size, type);
 }
 
 void __init e820_print_map(char *who)
@@ -417,11 +423,11 @@ static int __init append_e820_map(struct e820entry *biosmap, int nr_map)
 	return __append_e820_map(biosmap, nr_map);
 }
 
-static u64 __init e820_update_range_map(struct e820map *e820x, u64 start,
+static u64 __init __e820_update_range(struct e820map *e820x, u64 start,
 					u64 size, unsigned old_type,
 					unsigned new_type)
 {
-	unsigned int i, x;
+	unsigned int i;
 	u64 real_updated_size = 0;
 
 	BUG_ON(old_type == new_type);
@@ -447,22 +453,19 @@ static u64 __init e820_update_range_map(struct e820map *e820x, u64 start,
 		if (final_start >= final_end)
 			continue;
 
-		x = e820x->nr_map;
-		if (x == ARRAY_SIZE(e820x->map)) {
-			printk(KERN_ERR "Too many memory map entries!\n");
-			break;
-		}
-		e820x->map[x].addr = final_start;
-		e820x->map[x].size = final_end - final_start;
-		e820x->map[x].type = new_type;
-		e820x->nr_map++;
+		__e820_add_region(e820x, final_start, final_end - final_start,
+				  new_type);
 
 		real_updated_size += final_end - final_start;
 
+		/*
+		 * left range could be head or tail, so need to update
+		 * size at first.
+		 */
+		ei->size -= final_end - final_start;
 		if (ei->addr < final_start)
 			continue;
 		ei->addr = final_end;
-		ei->size -= final_end - final_start;
 	}
 	return real_updated_size;
 }
@@ -470,13 +473,13 @@ static u64 __init e820_update_range_map(struct e820map *e820x, u64 start,
 u64 __init e820_update_range(u64 start, u64 size, unsigned old_type,
 			     unsigned new_type)
 {
-	return e820_update_range_map(&e820, start, size, old_type, new_type);
+	return __e820_update_range(&e820, start, size, old_type, new_type);
 }
 
 static u64 __init e820_update_range_saved(u64 start, u64 size,
 					  unsigned old_type, unsigned new_type)
 {
-	return e820_update_range_map(&e820_saved, start, size, old_type,
+	return __e820_update_range(&e820_saved, start, size, old_type,
 				     new_type);
 }
 

[PATCH] x86: make e820_update_range to handle small range update

[Yinghai Lu]

Impact: enhance to handle more case.

try to handle new range could be covered by one entry.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/kernel/e820.c |   23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

Index: linux-2.6/arch/x86/kernel/e820.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/e820.c
+++ linux-2.6/arch/x86/kernel/e820.c
@@ -427,6 +427,7 @@ static u64 __init __e820_update_range(st
 					u64 size, unsigned old_type,
 					unsigned new_type)
 {
+	u64 end;
 	unsigned int i;
 	u64 real_updated_size = 0;
 
@@ -435,21 +436,35 @@ static u64 __init __e820_update_range(st
 	if (size > (ULLONG_MAX - start))
 		size = ULLONG_MAX - start;
 
+	end = start + size;
 	for (i = 0; i < e820x->nr_map; i++) {
 		struct e820entry *ei = &e820x->map[i];
 		u64 final_start, final_end;
+		u64 ei_end;
+
 		if (ei->type != old_type)
 			continue;
-		/* totally covered? */
-		if (ei->addr >= start &&
-		    (ei->addr + ei->size) <= (start + size)) {
+
+		ei_end = ei->addr + ei->size;
+		/* totally covered by new range? */
+		if (ei->addr >= start && ei_end <= end) {
 			ei->type = new_type;
 			real_updated_size += ei->size;
 			continue;
 		}
+
+		/* new range is totally covered? */
+		if (ei->addr < start && ei_end > end) {
+			__e820_add_region(e820x, start, size, new_type);
+			__e820_add_region(e820x, end, ei_end - end, ei->type);
+			ei->size = start - ei->addr;
+			real_updated_size += size;
+			continue;
+		}
+
 		/* partially covered */
 		final_start = max(start, ei->addr);
-		final_end = min(start + size, ei->addr + ei->size);
+		final_end = min(end, ei_end);
 		if (final_start >= final_end)
 			continue;
 

[tip:x86/mm] x86: make e820_update_range() handle small range update

[Yinghai Lu]

Commit-ID:  78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Gitweb:     http://git.kernel.org/tip/78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Author:     Yinghai Lu <yinghai@kernel.org>
AuthorDate: Thu, 12 Mar 2009 22:36:01 -0700
Commit:     Ingo Molnar <mingo@elte.hu>
CommitDate: Sat, 14 Mar 2009 12:20:07 +0100

x86: make e820_update_range() handle small range update

Impact: enhance e820 code to handle more cases

Try to handle new range which could be covered by one entry.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: jbeulich@novell.com
LKML-Reference: <49B9F0C1.10402@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>


---
 arch/x86/kernel/e820.c |   23 +++++++++++++++++++----
 1 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 95b81c1..0c34ff4 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -427,6 +427,7 @@ static u64 __init __e820_update_range(struct e820map *e820x, u64 start,
 					u64 size, unsigned old_type,
 					unsigned new_type)
 {
+	u64 end;
 	unsigned int i;
 	u64 real_updated_size = 0;
 
@@ -435,21 +436,35 @@ static u64 __init __e820_update_range(struct e820map *e820x, u64 start,
 	if (size > (ULLONG_MAX - start))
 		size = ULLONG_MAX - start;
 
+	end = start + size;
 	for (i = 0; i < e820x->nr_map; i++) {
 		struct e820entry *ei = &e820x->map[i];
 		u64 final_start, final_end;
+		u64 ei_end;
+
 		if (ei->type != old_type)
 			continue;
-		/* totally covered? */
-		if (ei->addr >= start &&
-		    (ei->addr + ei->size) <= (start + size)) {
+
+		ei_end = ei->addr + ei->size;
+		/* totally covered by new range? */
+		if (ei->addr >= start && ei_end <= end) {
 			ei->type = new_type;
 			real_updated_size += ei->size;
 			continue;
 		}
+
+		/* new range is totally covered? */
+		if (ei->addr < start && ei_end > end) {
+			__e820_add_region(e820x, start, size, new_type);
+			__e820_add_region(e820x, end, ei_end - end, ei->type);
+			ei->size = start - ei->addr;
+			real_updated_size += size;
+			continue;
+		}
+
 		/* partially covered */
 		final_start = max(start, ei->addr);
-		final_end = min(start + size, ei->addr + ei->size);
+		final_end = min(end, ei_end);
 		if (final_start >= final_end)
 			continue;
 

Re: [tip:x86/mm] x86: make e820_update_range() handle small range update

[Ingo Molnar]

* Yinghai Lu <yinghai@kernel.org> wrote:

> Commit-ID:  78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
> Gitweb:     http://git.kernel.org/tip/78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
> Author:     Yinghai Lu <yinghai@kernel.org>
> AuthorDate: Thu, 12 Mar 2009 22:36:01 -0700
> Commit:     Ingo Molnar <mingo@elte.hu>
> CommitDate: Sat, 14 Mar 2009 12:20:07 +0100
> 
> x86: make e820_update_range() handle small range update
> 
> Impact: enhance e820 code to handle more cases
> 
> Try to handle new range which could be covered by one entry.
> 
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> Cc: jbeulich@novell.com
> LKML-Reference: <49B9F0C1.10402@kernel.org>
> Signed-off-by: Ingo Molnar <mingo@elte.hu>

-tip testing found a bootup crash + reboot due to this patch.

config attached. The bootup crashes here:

[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000]   get_mtrr: cpu0 reg00 base=0000000000 size=0000040000 write-back
[    reboot  ]

	Ingo

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc8
# Sat Mar 14 13:15:58 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
CONFIG_BROKEN_BOOT_ALLOWED3=y
CONFIG_BROKEN_BOOT_ALLOWED2=y
# CONFIG_BROKEN_BOOT_ALLOWED is not set
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP_SUPPORT=y
CONFIG_SPARSE_IRQ=y
CONFIG_NUMA_MIGRATE_IRQ_DESC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_ELAN=y
CONFIG_X86_RDC321X=y
CONFIG_X86_32_NON_STANDARD=y
CONFIG_X86_NUMAQ=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_KVM_CLOCK is not set
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_CLOCK is not set
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_MEMTEST=y
CONFIG_X86_SUMMIT_NUMA=y
CONFIG_X86_CYCLONE_TIMER=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=4
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
# CONFIG_CPU_SUP_AMD is not set
CONFIG_CPU_SUP_CENTAUR_32=y
CONFIG_CPU_SUP_TRANSMETA_32=y
# CONFIG_CPU_SUP_UMC_32 is not set
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_DMI is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_CPU_DEBUG=y
# CONFIG_UP_WANTED_1 is not set
CONFIG_SMP=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_HAVE_ARCH_BOOTMEM=y
CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_HAVE_ARCH_ALLOC_REMAP=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_MMU_NOTIFIER=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
# CONFIG_X86_RESERVE_LOW_64K is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR_ALL=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set

#
# Power management and ACPI options
#
# CONFIG_PM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_MCA=y
# CONFIG_MCA_LEGACY is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
# CONFIG_YENTA_ENE_TUNE is not set
# CONFIG_YENTA_TOSHIBA is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
CONFIG_HOTPLUG_PCI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_FTP is not set
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=y
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
# CONFIG_NET_EMATCH_META is not set
CONFIG_NET_EMATCH_TEXT=y
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not set
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
CONFIG_BPQETHER=y
# CONFIG_BAYCOM_SER_FDX is not set
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_BAYCOM_EPP=y
# CONFIG_YAM is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIUART=y
# CONFIG_BT_HCIUART_H4 is not set
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIVHCI=y
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_PHONET=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_REG_DEBUG=y
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_MAC80211=y

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT=y
# CONFIG_MAC80211_NOINLINE is not set
CONFIG_MAC80211_VERBOSE_DEBUG=y
# CONFIG_MAC80211_HT_DEBUG is not set
CONFIG_MAC80211_TKIP_DEBUG=y
# CONFIG_MAC80211_IBSS_DEBUG is not set
CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
# CONFIG_MAC80211_DEBUG_COUNTERS is not set
CONFIG_MAC80211_VERBOSE_SPECT_MGMT_DEBUG=y
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_93CX6=y
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=y
# CONFIG_FCOE is not set
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_IBMMCA=y
CONFIG_IBMMCA_SCSI_ORDER_STANDARD=y
CONFIG_IBMMCA_SCSI_DEV_RESET=y
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR_D700=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_NCR_Q720 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=y
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_NSP32=y
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=y
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SX4=y
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not set
CONFIG_PATA_CS5530=y
# CONFIG_PATA_CS5535 is not set
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT821X=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87410=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PDC_OLD is not set
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_PDC2027X=y
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_SCH=y
# CONFIG_MD is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
# CONFIG_IEEE1394_OHCI1394 is not set
CONFIG_IEEE1394_PCILYNX=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_NET_VENDOR_SMC is not set
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
CONFIG_DE4X5=y
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
CONFIG_ULI526X=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_DEPCA=y
# CONFIG_HP100 is not set
CONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=y
# CONFIG_SIS900 is not set
CONFIG_EPIC100=y
CONFIG_SMSC9420=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_TLAN=y
# CONFIG_VIA_RHINE is not set
CONFIG_SC92031=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
CONFIG_DE600=y
CONFIG_DE620=y
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_QLA3XXX=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=y
# CONFIG_ENIC is not set
CONFIG_IXGBE=y
CONFIG_IXGB=y
CONFIG_S2IO=y
CONFIG_MYRI10GE=y
CONFIG_NIU=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
# CONFIG_IBMOL is not set
CONFIG_IBMLS=y
CONFIG_3C359=y
# CONFIG_TMS380TR is not set

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=y
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set

#
# WiMAX Wireless Broadband devices
#

#
# Enable MMC support to see WiMAX SDIO drivers
#

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
# CONFIG_ATM_ENI is not set
CONFIG_ATM_FIRESTREAM=y
CONFIG_ATM_ZATM=y
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=y
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=y
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=y
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=y
# CONFIG_FDDI is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
CONFIG_ISDN_PPP=y
# CONFIG_ISDN_PPP_VJ is not set
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
# CONFIG_ISDN_TTY_FAX is not set
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=y

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y

#
# D-channel protocol features
#
# CONFIG_HISAX_EURO is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
# CONFIG_HISAX_16_3 is not set
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
# CONFIG_HISAX_FRITZPCI is not set
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
# CONFIG_HISAX_DIEHLDIVA is not set
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
# CONFIG_HISAX_HFC_PCI is not set
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
# CONFIG_HISAX_ENTERNOW_PCI is not set
CONFIG_HISAX_DEBUG=y

#
# HiSax PCMCIA card service modules
#

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=y
# CONFIG_HISAX_HFCUSB is not set
# CONFIG_HISAX_HFC4S8S is not set
CONFIG_HISAX_FRITZ_PCIPNP=y
CONFIG_HISAX_HDLC=y

#
# Active cards
#
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_BASE=y
CONFIG_GIGASET_M105=y
CONFIG_GIGASET_M101=y
# CONFIG_GIGASET_DEBUG is not set
CONFIG_GIGASET_UNDOCREQ=y
# CONFIG_ISDN_CAPI is not set
CONFIG_PHONE=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_WALKERA0701=y
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_DA9034 is not set
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_CM109=y
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF50633_PMU is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_MCA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
# CONFIG_SONYPI is not set
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
CONFIG_CS5535_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SIMTEC=y

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_SCx200_I2C=y
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
# CONFIG_SCx200_ACB is not set

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_GPIO=y
CONFIG_SPI_LM70_LLP=y

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set

#
# Memory mapped GPIO expanders:
#

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_GPIO=y

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_OLPC is not set
CONFIG_BATTERY_BQ27x00=y
# CONFIG_BATTERY_DA9030 is not set
CONFIG_CHARGER_PCF50633=y
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
CONFIG_ALIM7101_WDT=y
CONFIG_SC520_WDT=y
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=y
CONFIG_SC1200_WDT=y
# CONFIG_SCx200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_RDC321X_WDT=y
CONFIG_60XX_WDT=y
CONFIG_SBC8360_WDT=y
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_W83627HF_WDT=y
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=y
# CONFIG_MACHZ_WDT is not set
CONFIG_SBC_EPX_C3_WATCHDOG=y

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=y
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_BQ24022=y
# CONFIG_REGULATOR_DA903X is not set
CONFIG_REGULATOR_PCF50633=y

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMIZE=y
# CONFIG_MEDIA_TUNER_SIMPLE is not set
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
# CONFIG_MEDIA_TUNER_TEA5767 is not set
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MT2131 is not set
CONFIG_MEDIA_TUNER_QT1010=y
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC5000=y
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEO_BTCX=y
CONFIG_VIDEO_IR=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9875=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_WM8775=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_CX25840=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
CONFIG_VIDEO_VIVI=y
CONFIG_VIDEO_BT848=y
# CONFIG_VIDEO_SAA6588 is not set
# CONFIG_VIDEO_SAA5246A is not set
CONFIG_VIDEO_SAA5249=y
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_HEXIUM_ORION=y
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_IVTV=y
CONFIG_VIDEO_FB_IVTV=y
CONFIG_VIDEO_CAFE_CCIC=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9M001=y
CONFIG_MT9M001_PCA9536_SWITCH=y
CONFIG_SOC_CAMERA_MT9M111=y
CONFIG_SOC_CAMERA_MT9T031=y
# CONFIG_SOC_CAMERA_MT9V022 is not set
CONFIG_SOC_CAMERA_TW9910=y
CONFIG_SOC_CAMERA_PLATFORM=y
CONFIG_SOC_CAMERA_OV772X=y
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=y
CONFIG_USB_M5602=y
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GSPCA_CONEX is not set
CONFIG_USB_GSPCA_ETOMS=y
CONFIG_USB_GSPCA_FINEPIX=y
CONFIG_USB_GSPCA_MARS=y
# CONFIG_USB_GSPCA_OV519 is not set
CONFIG_USB_GSPCA_OV534=y
CONFIG_USB_GSPCA_PAC207=y
CONFIG_USB_GSPCA_PAC7311=y
CONFIG_USB_GSPCA_SONIXB=y
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
CONFIG_USB_GSPCA_SPCA501=y
CONFIG_USB_GSPCA_SPCA505=y
# CONFIG_USB_GSPCA_SPCA506 is not set
CONFIG_USB_GSPCA_SPCA508=y
CONFIG_USB_GSPCA_SPCA561=y
CONFIG_USB_GSPCA_STK014=y
CONFIG_USB_GSPCA_SUNPLUS=y
CONFIG_USB_GSPCA_T613=y
CONFIG_USB_GSPCA_TV8532=y
CONFIG_USB_GSPCA_VC032X=y
CONFIG_USB_GSPCA_ZC3XX=y
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_EM28XX=y
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
CONFIG_USB_SN9C102=y
CONFIG_USB_ZC0301=y
CONFIG_USB_ZR364XX=y
CONFIG_USB_STKWEBCAM=y
CONFIG_USB_S2255=y
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
# CONFIG_AGP_ATI is not set
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_MGA=y
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
# CONFIG_FB_IMSTT is not set
CONFIG_FB_UVESA=y
CONFIG_FB_N411=y
# CONFIG_FB_HGA is not set
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
# CONFIG_FB_I810 is not set
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_INTEL=y
CONFIG_FB_INTEL_DEBUG=y
# CONFIG_FB_INTEL_I2C is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
CONFIG_FB_VIA=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=y
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=y
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
# CONFIG_FB_GEODE_LX is not set
# CONFIG_FB_GEODE_GX is not set
CONFIG_FB_GEODE_GX1=y
CONFIG_FB_SM501=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI9320=y
# CONFIG_LCD_TDO24M is not set
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_MBP_NVIDIA=y
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_MOUSE=y

#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
# CONFIG_HID_APPLE is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_SAMSUNG=y
# CONFIG_HID_SONY is not set
CONFIG_HID_SUNPLUS=y
CONFIG_GREENASIA_FF=y
# CONFIG_HID_TOPSEED is not set
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_HWA_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#

#
# see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_PHIDGET=y
CONFIG_USB_PHIDGETKIT=y
CONFIG_USB_PHIDGETMOTORCONTROL=y
CONFIG_USB_PHIDGETSERVO=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_VST=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
# CONFIG_USB_CXACRU is not set
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_WLP=y
CONFIG_UWB_I1480U=y
CONFIG_UWB_I1480U_WLP=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_DS3234=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_PCF50633=y

#
# on-CPU RTC drivers
#
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
# CONFIG_CFAG12864B is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_SMX is not set
CONFIG_UIO_SERCOS3=y
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_DEBUG=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ALLOW_WARNINGS is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y

#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_EVENT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BOOT_TRACER=y
CONFIG_POWER_TRACER=y
# CONFIG_STACK_TRACER is not set
CONFIG_HW_BRANCH_TRACER=y
CONFIG_KMEMTRACE=y
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_DYNAMIC_PRINTK_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
CONFIG_KGDB_TESTS=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DOUBLEFAULT is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
# CONFIG_KVM_TRACE is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

Re: [tip:x86/mm] x86: make e820_update_range() handle small range update

[Yinghai Lu]

Ingo Molnar wrote:
> * Yinghai Lu <yinghai@kernel.org> wrote:
> 
>> Commit-ID:  78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
>> Gitweb:     http://git.kernel.org/tip/78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
>> Author:     Yinghai Lu <yinghai@kernel.org>
>> AuthorDate: Thu, 12 Mar 2009 22:36:01 -0700
>> Commit:     Ingo Molnar <mingo@elte.hu>
>> CommitDate: Sat, 14 Mar 2009 12:20:07 +0100
>>
>> x86: make e820_update_range() handle small range update
>>
>> Impact: enhance e820 code to handle more cases
>>
>> Try to handle new range which could be covered by one entry.
>>
>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>> Cc: jbeulich@novell.com
>> LKML-Reference: <49B9F0C1.10402@kernel.org>
>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> 
> -tip testing found a bootup crash + reboot due to this patch.
> 
> config attached. The bootup crashes here:
> 
> [    0.000000] MTRR variable ranges enabled:
> [    0.000000]   0 base 0000000000 mask FFC0000000 write-back
> [    0.000000]   1 disabled
> [    0.000000]   2 disabled
> [    0.000000]   3 disabled
> [    0.000000]   4 disabled
> [    0.000000]   5 disabled
> [    0.000000]   6 disabled
> [    0.000000]   7 disabled
> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [    0.000000]   get_mtrr: cpu0 reg00 base=0000000000 size=0000040000 write-back
> [    reboot  ]
> 

what does the e820 map look like?

YH

Re: [tip:x86/mm] x86: make e820_update_range() handle small range update

[Ingo Molnar]

* Yinghai Lu <yinghai@kernel.org> wrote:

> Ingo Molnar wrote:
> > * Yinghai Lu <yinghai@kernel.org> wrote:
> > 
> >> Commit-ID:  78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
> >> Gitweb:     http://git.kernel.org/tip/78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
> >> Author:     Yinghai Lu <yinghai@kernel.org>
> >> AuthorDate: Thu, 12 Mar 2009 22:36:01 -0700
> >> Commit:     Ingo Molnar <mingo@elte.hu>
> >> CommitDate: Sat, 14 Mar 2009 12:20:07 +0100
> >>
> >> x86: make e820_update_range() handle small range update
> >>
> >> Impact: enhance e820 code to handle more cases
> >>
> >> Try to handle new range which could be covered by one entry.
> >>
> >> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >> Cc: jbeulich@novell.com
> >> LKML-Reference: <49B9F0C1.10402@kernel.org>
> >> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > 
> > -tip testing found a bootup crash + reboot due to this patch.
> > 
> > config attached. The bootup crashes here:
> > 
> > [    0.000000] MTRR variable ranges enabled:
> > [    0.000000]   0 base 0000000000 mask FFC0000000 write-back
> > [    0.000000]   1 disabled
> > [    0.000000]   2 disabled
> > [    0.000000]   3 disabled
> > [    0.000000]   4 disabled
> > [    0.000000]   5 disabled
> > [    0.000000]   6 disabled
> > [    0.000000]   7 disabled
> > [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> > [    0.000000]   get_mtrr: cpu0 reg00 base=0000000000 size=0000040000 write-back
> > [    reboot  ]
> > 
> 
> what does the e820 map look like?

[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)

	Ingo

Re: [tip:x86/mm] x86: make e820_update_range() handle small range update

[Yinghai Lu]

Ingo Molnar wrote:
> * Yinghai Lu <yinghai@kernel.org> wrote:
> 
>> Ingo Molnar wrote:
>>> * Yinghai Lu <yinghai@kernel.org> wrote:
>>>
>>>> Commit-ID:  78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
>>>> Gitweb:     http://git.kernel.org/tip/78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
>>>> Author:     Yinghai Lu <yinghai@kernel.org>
>>>> AuthorDate: Thu, 12 Mar 2009 22:36:01 -0700
>>>> Commit:     Ingo Molnar <mingo@elte.hu>
>>>> CommitDate: Sat, 14 Mar 2009 12:20:07 +0100
>>>>
>>>> x86: make e820_update_range() handle small range update
>>>>
>>>> Impact: enhance e820 code to handle more cases
>>>>
>>>> Try to handle new range which could be covered by one entry.
>>>>
>>>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>>>> Cc: jbeulich@novell.com
>>>> LKML-Reference: <49B9F0C1.10402@kernel.org>
>>>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
>>> -tip testing found a bootup crash + reboot due to this patch.
>>>
>>> config attached. The bootup crashes here:
>>>
>>> [    0.000000] MTRR variable ranges enabled:
>>> [    0.000000]   0 base 0000000000 mask FFC0000000 write-back
>>> [    0.000000]   1 disabled
>>> [    0.000000]   2 disabled
>>> [    0.000000]   3 disabled
>>> [    0.000000]   4 disabled
>>> [    0.000000]   5 disabled
>>> [    0.000000]   6 disabled
>>> [    0.000000]   7 disabled
>>> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>>> [    0.000000]   get_mtrr: cpu0 reg00 base=0000000000 size=0000040000 write-back
>>> [    reboot  ]
>>>
>> what does the e820 map look like?
> 
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> [    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> [    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> 

it seems that patch revealed the bug in setup_bios_corruption_check

please check, and apply follow at first, and apply that patch later.

YH

[PATCH] x86: fix 64k corruption checking

Impact: fix crash

need that exit early if the addr far above 64k

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/kernel/check.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Index: linux-2.6/arch/x86/kernel/check.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/check.c
+++ linux-2.6/arch/x86/kernel/check.c
@@ -86,12 +86,12 @@ void __init setup_bios_corruption_check(
 		if (!(addr + 1))
 			break;
 
+		if (addr >= corruption_check_size)
+			break;
+
 		if ((addr + size) > corruption_check_size)
 			size = corruption_check_size - addr;
 
-		if (size == 0)
-			break;
-
 		e820_update_range(addr, size, E820_RAM, E820_RESERVED);
 		scan_areas[num_scan_areas].addr = addr;
 		scan_areas[num_scan_areas].size = size;

Re: [tip:x86/mm] x86: make e820_update_range() handle small range update

[Ingo Molnar]

* Yinghai Lu <yinghai@kernel.org> wrote:

> Ingo Molnar wrote:
> > * Yinghai Lu <yinghai@kernel.org> wrote:
> > 
> >> Ingo Molnar wrote:
> >>> * Yinghai Lu <yinghai@kernel.org> wrote:
> >>>
> >>>> Commit-ID:  78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
> >>>> Gitweb:     http://git.kernel.org/tip/78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
> >>>> Author:     Yinghai Lu <yinghai@kernel.org>
> >>>> AuthorDate: Thu, 12 Mar 2009 22:36:01 -0700
> >>>> Commit:     Ingo Molnar <mingo@elte.hu>
> >>>> CommitDate: Sat, 14 Mar 2009 12:20:07 +0100
> >>>>
> >>>> x86: make e820_update_range() handle small range update
> >>>>
> >>>> Impact: enhance e820 code to handle more cases
> >>>>
> >>>> Try to handle new range which could be covered by one entry.
> >>>>
> >>>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >>>> Cc: jbeulich@novell.com
> >>>> LKML-Reference: <49B9F0C1.10402@kernel.org>
> >>>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>> -tip testing found a bootup crash + reboot due to this patch.
> >>>
> >>> config attached. The bootup crashes here:
> >>>
> >>> [    0.000000] MTRR variable ranges enabled:
> >>> [    0.000000]   0 base 0000000000 mask FFC0000000 write-back
> >>> [    0.000000]   1 disabled
> >>> [    0.000000]   2 disabled
> >>> [    0.000000]   3 disabled
> >>> [    0.000000]   4 disabled
> >>> [    0.000000]   5 disabled
> >>> [    0.000000]   6 disabled
> >>> [    0.000000]   7 disabled
> >>> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> >>> [    0.000000]   get_mtrr: cpu0 reg00 base=0000000000 size=0000040000 write-back
> >>> [    reboot  ]
> >>>
> >> what does the e820 map look like?
> > 
> > [    0.000000] BIOS-provided physical RAM map:
> > [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> > [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> > [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> > [    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> > [    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> > [    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> > [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> > [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> > 
> 
> it seems that patch revealed the bug in 
> setup_bios_corruption_check

Cool. I'm wondering, could this explain:

   http://bugzilla.kernel.org/show_bug.cgi?id=12645

?

	Ingo

Re: [tip:x86/mm] x86: make e820_update_range() handle small range update

[Yinghai Lu]

Ingo Molnar wrote:
> * Yinghai Lu <yinghai@kernel.org> wrote:
> 
>> Ingo Molnar wrote:
>>> * Yinghai Lu <yinghai@kernel.org> wrote:
>>>
>>>> Ingo Molnar wrote:
>>>>> * Yinghai Lu <yinghai@kernel.org> wrote:
>>>>>
>>>>>> Commit-ID:  78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
>>>>>> Gitweb:     http://git.kernel.org/tip/78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
>>>>>> Author:     Yinghai Lu <yinghai@kernel.org>
>>>>>> AuthorDate: Thu, 12 Mar 2009 22:36:01 -0700
>>>>>> Commit:     Ingo Molnar <mingo@elte.hu>
>>>>>> CommitDate: Sat, 14 Mar 2009 12:20:07 +0100
>>>>>>
>>>>>> x86: make e820_update_range() handle small range update
>>>>>>
>>>>>> Impact: enhance e820 code to handle more cases
>>>>>>
>>>>>> Try to handle new range which could be covered by one entry.
>>>>>>
>>>>>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>>>>>> Cc: jbeulich@novell.com
>>>>>> LKML-Reference: <49B9F0C1.10402@kernel.org>
>>>>>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
>>>>> -tip testing found a bootup crash + reboot due to this patch.
>>>>>
>>>>> config attached. The bootup crashes here:
>>>>>
>>>>> [    0.000000] MTRR variable ranges enabled:
>>>>> [    0.000000]   0 base 0000000000 mask FFC0000000 write-back
>>>>> [    0.000000]   1 disabled
>>>>> [    0.000000]   2 disabled
>>>>> [    0.000000]   3 disabled
>>>>> [    0.000000]   4 disabled
>>>>> [    0.000000]   5 disabled
>>>>> [    0.000000]   6 disabled
>>>>> [    0.000000]   7 disabled
>>>>> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>>>>> [    0.000000]   get_mtrr: cpu0 reg00 base=0000000000 size=0000040000 write-back
>>>>> [    reboot  ]
>>>>>
>>>> what does the e820 map look like?
>>> [    0.000000] BIOS-provided physical RAM map:
>>> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>>> [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>>> [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>> [    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
>>> [    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
>>> [    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
>>> [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>>> [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>>>
>> it seems that patch revealed the bug in 
>> setup_bios_corruption_check
> 
> Cool. I'm wondering, could this explain:
> 
>    http://bugzilla.kernel.org/show_bug.cgi?id=12645
> 

i wonder if we need to add print out about range from e820_update_range() 
or add sth like boundary checking in e820_update_range() to stop crazy calling?

YH

Re: [tip:x86/mm] x86: make e820_update_range() handle small range update

[Ingo Molnar]

* Yinghai Lu <yinghai@kernel.org> wrote:

> Ingo Molnar wrote:
> > * Yinghai Lu <yinghai@kernel.org> wrote:
> > 
> >> Ingo Molnar wrote:
> >>> * Yinghai Lu <yinghai@kernel.org> wrote:
> >>>
> >>>> Ingo Molnar wrote:
> >>>>> * Yinghai Lu <yinghai@kernel.org> wrote:
> >>>>>
> >>>>>> Commit-ID:  78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
> >>>>>> Gitweb:     http://git.kernel.org/tip/78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
> >>>>>> Author:     Yinghai Lu <yinghai@kernel.org>
> >>>>>> AuthorDate: Thu, 12 Mar 2009 22:36:01 -0700
> >>>>>> Commit:     Ingo Molnar <mingo@elte.hu>
> >>>>>> CommitDate: Sat, 14 Mar 2009 12:20:07 +0100
> >>>>>>
> >>>>>> x86: make e820_update_range() handle small range update
> >>>>>>
> >>>>>> Impact: enhance e820 code to handle more cases
> >>>>>>
> >>>>>> Try to handle new range which could be covered by one entry.
> >>>>>>
> >>>>>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >>>>>> Cc: jbeulich@novell.com
> >>>>>> LKML-Reference: <49B9F0C1.10402@kernel.org>
> >>>>>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>>>> -tip testing found a bootup crash + reboot due to this patch.
> >>>>>
> >>>>> config attached. The bootup crashes here:
> >>>>>
> >>>>> [    0.000000] MTRR variable ranges enabled:
> >>>>> [    0.000000]   0 base 0000000000 mask FFC0000000 write-back
> >>>>> [    0.000000]   1 disabled
> >>>>> [    0.000000]   2 disabled
> >>>>> [    0.000000]   3 disabled
> >>>>> [    0.000000]   4 disabled
> >>>>> [    0.000000]   5 disabled
> >>>>> [    0.000000]   6 disabled
> >>>>> [    0.000000]   7 disabled
> >>>>> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> >>>>> [    0.000000]   get_mtrr: cpu0 reg00 base=0000000000 size=0000040000 write-back
> >>>>> [    reboot  ]
> >>>>>
> >>>> what does the e820 map look like?
> >>> [    0.000000] BIOS-provided physical RAM map:
> >>> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> >>> [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> >>> [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> >>> [    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> >>> [    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> >>> [    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> >>> [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> >>> [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> >>>
> >> it seems that patch revealed the bug in 
> >> setup_bios_corruption_check
> > 
> > Cool. I'm wondering, could this explain:
> > 
> >    http://bugzilla.kernel.org/show_bug.cgi?id=12645
> > 
> 
> i wonder if we need to add print out about range from 
> e820_update_range() or add sth like boundary checking in 
> e820_update_range() to stop crazy calling?

Boundary checks - yes! The e820 engine should be a safe black 
box, as much as possible. In case of errors, if there's no 
secure way to proceed, we should emit a meaningful warning and 
should panic().

	Ingo

[tip:x86/mm] x86: fix 64k corruption-check

[Yinghai Lu]

Commit-ID:  6d7942dc2a70a7e74c352107b150265602671588
Gitweb:     http://git.kernel.org/tip/6d7942dc2a70a7e74c352107b150265602671588
Author:     Yinghai Lu <yinghai@kernel.org>
AuthorDate: Sat, 14 Mar 2009 14:32:41 -0700
Commit:     Ingo Molnar <mingo@elte.hu>
CommitDate: Sun, 15 Mar 2009 07:03:15 +0100

x86: fix 64k corruption-check

Impact: fix boot crash

Need to exit early if the addr is far above 64k.

The crash got exposed by:

  78a8b35: x86: make e820_update_range() handle small range update

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@kernel.org>
LKML-Reference: <49BC2279.2030101@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>


---
 arch/x86/kernel/check.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c
index b617b11..fc999e6 100644
--- a/arch/x86/kernel/check.c
+++ b/arch/x86/kernel/check.c
@@ -86,12 +86,12 @@ void __init setup_bios_corruption_check(void)
 		if (!(addr + 1))
 			break;
 
+		if (addr >= corruption_check_size)
+			break;
+
 		if ((addr + size) > corruption_check_size)
 			size = corruption_check_size - addr;
 
-		if (size == 0)
-			break;
-
 		e820_update_range(addr, size, E820_RAM, E820_RESERVED);
 		scan_areas[num_scan_areas].addr = addr;
 		scan_areas[num_scan_areas].size = size;

Re: [PATCH] x86: fix e820_update_range()

[Jan Beulich]

>>> Yinghai Lu <yinghai@kernel.org> 13.03.09 05:35 >>>
>
>Impact: fix left range size on head.
>
>| commit 5c0e6f035df983210e4d22213aed624ced502d3d
>|    x86: fix code paths used by update_mptable
>|    Impact: fix crashes under Xen due to unrobust e820 code
>fix one bug about e820 referring, but introduce other bug
>
>need update size for left range at first in case it is header.
>
>also add __e820_add_region take more parameter.
>
>Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>...
>+		/*
>+		 * left range could be head or tail, so need to update
>+		 * size at first.
>+		 */
>+		ei->size -= final_end - final_start;
> 		if (ei->addr < final_start)
> 			continue;
> 		ei->addr = final_end;
>-		ei->size -= final_end - final_start;

The change of mine here was done on purpose, since I had observed that
in this particular case (when the changed region starts later and ends earlier
than the original region) e820_add_region() would in any case create an
overlapping entry (which later gets cleaned up by sanitize_e820_map()).
That cleanup in sanitize_e820_map(), however, already implies reducing
the size of the enclosing region, and hence the original code (and the code
you try to restore now) effectively shrinks the original region twice.

Consequently, the only alternative to the code as resulting from my
patch appears to be to avoid the generation of overlapping entries in
the first place, but that would clearly make e820_update_range_map()
more complex.

Jan

Re: [PATCH] x86: fix e820_update_range()

[Ingo Molnar]

* Jan Beulich <jbeulich@novell.com> wrote:

> >>> Yinghai Lu <yinghai@kernel.org> 13.03.09 05:35 >>>
> >
> >Impact: fix left range size on head.
> >
> >| commit 5c0e6f035df983210e4d22213aed624ced502d3d
> >|    x86: fix code paths used by update_mptable
> >|    Impact: fix crashes under Xen due to unrobust e820 code
> >fix one bug about e820 referring, but introduce other bug
> >
> >need update size for left range at first in case it is header.
> >
> >also add __e820_add_region take more parameter.
> >
> >Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >...
> >+		/*
> >+		 * left range could be head or tail, so need to update
> >+		 * size at first.
> >+		 */
> >+		ei->size -= final_end - final_start;
> > 		if (ei->addr < final_start)
> > 			continue;
> > 		ei->addr = final_end;
> >-		ei->size -= final_end - final_start;
> 
> The change of mine here was done on purpose, since I had 
> observed that in this particular case (when the changed region 
> starts later and ends earlier than the original region) 
> e820_add_region() would in any case create an overlapping 
> entry (which later gets cleaned up by sanitize_e820_map()). 
> That cleanup in sanitize_e820_map(), however, already implies 
> reducing the size of the enclosing region, and hence the 
> original code (and the code you try to restore now) 
> effectively shrinks the original region twice.
> 
> Consequently, the only alternative to the code as resulting 
> from my patch appears to be to avoid the generation of 
> overlapping entries in the first place, but that would clearly 
> make e820_update_range_map() more complex.

Still that looks like the best course of action - the core e820 
primitives should always produce a sane map.

	Ingo

Re: [PATCH] x86: fix e820_update_range()

[Yinghai Lu]

Ingo Molnar wrote:
> * Jan Beulich <jbeulich@novell.com> wrote:
> 
>>>>> Yinghai Lu <yinghai@kernel.org> 13.03.09 05:35 >>>
>>> Impact: fix left range size on head.
>>>
>>> | commit 5c0e6f035df983210e4d22213aed624ced502d3d
>>> |    x86: fix code paths used by update_mptable
>>> |    Impact: fix crashes under Xen due to unrobust e820 code
>>> fix one bug about e820 referring, but introduce other bug
>>>
>>> need update size for left range at first in case it is header.
>>>
>>> also add __e820_add_region take more parameter.
>>>
>>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>>> ...
>>> +		/*
>>> +		 * left range could be head or tail, so need to update
>>> +		 * size at first.
>>> +		 */
>>> +		ei->size -= final_end - final_start;
>>> 		if (ei->addr < final_start)
>>> 			continue;
>>> 		ei->addr = final_end;
>>> -		ei->size -= final_end - final_start;
>> The change of mine here was done on purpose, since I had 
>> observed that in this particular case (when the changed region 
>> starts later and ends earlier than the original region) 
>> e820_add_region() would in any case create an overlapping 
>> entry (which later gets cleaned up by sanitize_e820_map()). 
>> That cleanup in sanitize_e820_map(), however, already implies 
>> reducing the size of the enclosing region, and hence the 
>> original code (and the code you try to restore now) 
>> effectively shrinks the original region twice.
>>
>> Consequently, the only alternative to the code as resulting 
>> from my patch appears to be to avoid the generation of 
>> overlapping entries in the first place, but that would clearly 
>> make e820_update_range_map() more complex.
> 
> Still that looks like the best course of action - the core e820 
> primitives should always produce a sane map.
> 
yesterday i sent out
[PATCH] x86: make e820_update_range to handle small range update

YH