* [PATCH 1/7] x86/acpi: remove compress irq trick for 32bit
@ 2009-05-06 17:05 ` Yinghai Lu
0 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:05 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
We already have per cpu vector for 32bit, and don't need this trick any more.
on 3 ioapic system (24 per ioapic) before patch got
ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71
IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 64 Mode:1 Active:1)
pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 64
ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67
IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 65 Mode:1 Active:1)
pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66
IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1)
pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65
IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 67 Mode:1 Active:1)
pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64
IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 68 Mode:1 Active:1)
pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
after patch will get
ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71
IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 71 Mode:1 Active:1)
pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 71
ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67
IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 67 Mode:1 Active:1)
pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66
IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1)
pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65
IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 65 Mode:1 Active:1)
pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64
IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 64 Mode:1 Active:1)
pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
[ Impact: make irq = gsi on 32bit system with more ioapics ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/acpi/boot.c | 65 ++++----------------------------------------
1 file changed, 7 insertions(+), 58 deletions(-)
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -1162,22 +1162,9 @@ int mp_register_gsi(struct device *dev,
{
int ioapic;
int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM 4096
-#define IRQ_COMPRESSION_START 64
-
- static int pci_irq = IRQ_COMPRESSION_START;
- /*
- * Mapping between Global System Interrupts, which
- * represent all possible interrupts, and IRQs
- * assigned to actual devices.
- */
- static int gsi_to_irq[MAX_GSI_NUM];
-#else
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
-#endif
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -1196,66 +1183,28 @@ int mp_register_gsi(struct device *dev,
gsi = ioapic_renumber_irq(ioapic, gsi);
#endif
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
"%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
ioapic_pin);
return gsi;
}
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
pr_debug("Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
- return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
return gsi;
-#endif
}
-
set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
- /*
- * For GSI >= 64, use IRQ compression
- */
- if ((gsi >= IRQ_COMPRESSION_START)
- && (triggering == ACPI_LEVEL_SENSITIVE)) {
- /*
- * For PCI devices assign IRQs in order, avoiding gaps
- * due to unused I/O APIC pins.
- */
- int irq = gsi;
- if (gsi < MAX_GSI_NUM) {
- /*
- * Retain the VIA chipset work-around (gsi > 15), but
- * avoid a problem where the 8254 timer (IRQ0) is setup
- * via an override (so it's not on pin 0 of the ioapic),
- * and at the same time, the pin 0 interrupt is a PCI
- * type. The gsi > 15 test could cause these two pins
- * to be shared as IRQ0, and they are not shareable.
- * So test for this condition, and if necessary, avoid
- * the pin collision.
- */
- gsi = pci_irq++;
- /*
- * Don't assign IRQ used by ACPI SCI
- */
- if (gsi == acpi_gbl_FADT.sci_interrupt)
- gsi = pci_irq++;
- gsi_to_irq[irq] = gsi;
- } else {
- printk(KERN_ERR "GSI %u is too high\n", gsi);
- return gsi;
- }
- }
-#endif
io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+
return gsi;
}
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 1/7] x86/acpi: remove compress irq trick for 32bit
@ 2009-05-06 17:05 ` Yinghai Lu
0 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:05 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes, Len Brown
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
We already have per cpu vector for 32bit, and don't need this trick any more.
on 3 ioapic system (24 per ioapic) before patch got
ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71
IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 64 Mode:1 Active:1)
pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 64
ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67
IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 65 Mode:1 Active:1)
pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66
IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1)
pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65
IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 67 Mode:1 Active:1)
pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64
IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 68 Mode:1 Active:1)
pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
after patch will get
ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71
IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 71 Mode:1 Active:1)
pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 71
ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67
IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 67 Mode:1 Active:1)
pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66
IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1)
pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65
IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 65 Mode:1 Active:1)
pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64
IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 64 Mode:1 Active:1)
pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
[ Impact: make irq = gsi on 32bit system with more ioapics ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/acpi/boot.c | 65 ++++----------------------------------------
1 file changed, 7 insertions(+), 58 deletions(-)
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -1162,22 +1162,9 @@ int mp_register_gsi(struct device *dev,
{
int ioapic;
int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM 4096
-#define IRQ_COMPRESSION_START 64
-
- static int pci_irq = IRQ_COMPRESSION_START;
- /*
- * Mapping between Global System Interrupts, which
- * represent all possible interrupts, and IRQs
- * assigned to actual devices.
- */
- static int gsi_to_irq[MAX_GSI_NUM];
-#else
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
-#endif
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -1196,66 +1183,28 @@ int mp_register_gsi(struct device *dev,
gsi = ioapic_renumber_irq(ioapic, gsi);
#endif
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
"%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
ioapic_pin);
return gsi;
}
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
pr_debug("Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
- return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
return gsi;
-#endif
}
-
set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
- /*
- * For GSI >= 64, use IRQ compression
- */
- if ((gsi >= IRQ_COMPRESSION_START)
- && (triggering == ACPI_LEVEL_SENSITIVE)) {
- /*
- * For PCI devices assign IRQs in order, avoiding gaps
- * due to unused I/O APIC pins.
- */
- int irq = gsi;
- if (gsi < MAX_GSI_NUM) {
- /*
- * Retain the VIA chipset work-around (gsi > 15), but
- * avoid a problem where the 8254 timer (IRQ0) is setup
- * via an override (so it's not on pin 0 of the ioapic),
- * and at the same time, the pin 0 interrupt is a PCI
- * type. The gsi > 15 test could cause these two pins
- * to be shared as IRQ0, and they are not shareable.
- * So test for this condition, and if necessary, avoid
- * the pin collision.
- */
- gsi = pci_irq++;
- /*
- * Don't assign IRQ used by ACPI SCI
- */
- if (gsi == acpi_gbl_FADT.sci_interrupt)
- gsi = pci_irq++;
- gsi_to_irq[irq] = gsi;
- } else {
- printk(KERN_ERR "GSI %u is too high\n", gsi);
- return gsi;
- }
- }
-#endif
io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+
return gsi;
}
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 2/7] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi -v2
2009-05-06 17:05 ` Yinghai Lu
@ 2009-05-06 17:06 ` Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:06 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
it seems that change about calling mp_config_acpi_gsi in acpi_pci_irq_enable()
never get into mainline.
actually we could call that in mp_register_gsi with struct device...
also could make mp_config_acpi_gsi to be static
v2: some calling could have to be pci device, need to check that
[Impact: make update_mptable working]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/mpspec.h | 9 -----
arch/x86/kernel/acpi/boot.c | 66 +++++++++++++++++++++++++-----------------
2 files changed, 40 insertions(+), 35 deletions(-)
Index: linux-2.6/arch/x86/include/asm/mpspec.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mpspec.h
+++ linux-2.6/arch/x86/include/asm/mpspec.h
@@ -77,17 +77,8 @@ extern int mp_register_gsi(struct device
int active_high_low);
extern int acpi_probe_gsi(void);
#ifdef CONFIG_X86_IO_APIC
-extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity);
extern int mp_find_ioapic(int gsi);
extern int mp_find_ioapic_pin(int ioapic, int gsi);
-#else
-static inline int
-mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
- return 0;
-}
#endif
#else /* !CONFIG_ACPI: */
static inline int acpi_probe_gsi(void)
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -33,6 +33,7 @@
#include <linux/irq.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
+#include <linux/pci.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
@@ -1158,6 +1159,44 @@ void __init mp_config_acpi_legacy_irqs(v
}
}
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering,
+ int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+ struct mpc_intsrc mp_irq;
+ struct pci_dev *pdev;
+ unsigned char number;
+ unsigned int devfn;
+ int ioapic;
+ u8 pin;
+
+ if (!acpi_ioapic)
+ return 0;
+ if (!dev)
+ return 0;
+ if (dev->bus != &pci_bus_type)
+ return 0;
+
+ pdev = to_pci_dev(dev);
+ number = pdev->bus->number;
+ devfn = pdev->devfn;
+ pin = pdev->pin;
+ /* print the entry should happen on mptable identically */
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ mp_irq.srcbus = number;
+ mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
+ mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+ save_mp_irq(&mp_irq);
+#endif
+ return 0;
+}
+
int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
{
int ioapic;
@@ -1189,6 +1228,7 @@ int mp_register_gsi(struct device *dev,
ioapic_pin);
return gsi;
}
+ mp_config_acpi_gsi(dev, gsi, triggering, polarity);
/*
* Avoid pin reprogramming. PRTs typically include entries
@@ -1208,32 +1248,6 @@ int mp_register_gsi(struct device *dev,
return gsi;
}
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
- struct mpc_intsrc mp_irq;
- int ioapic;
-
- if (!acpi_ioapic)
- return 0;
-
- /* print the entry should happen on mptable identically */
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
- (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
- mp_irq.srcbus = number;
- mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
- ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
- mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
- save_mp_irq(&mp_irq);
-#endif
- return 0;
-}
-
/*
* Parse IOAPIC related entries in MADT
* returns 0 on success, < 0 on error
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 2/7] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi -v2
@ 2009-05-06 17:06 ` Yinghai Lu
0 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:06 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes, Len Brown
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
it seems that change about calling mp_config_acpi_gsi in acpi_pci_irq_enable()
never get into mainline.
actually we could call that in mp_register_gsi with struct device...
also could make mp_config_acpi_gsi to be static
v2: some calling could have to be pci device, need to check that
[Impact: make update_mptable working]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/mpspec.h | 9 -----
arch/x86/kernel/acpi/boot.c | 66 +++++++++++++++++++++++++-----------------
2 files changed, 40 insertions(+), 35 deletions(-)
Index: linux-2.6/arch/x86/include/asm/mpspec.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mpspec.h
+++ linux-2.6/arch/x86/include/asm/mpspec.h
@@ -77,17 +77,8 @@ extern int mp_register_gsi(struct device
int active_high_low);
extern int acpi_probe_gsi(void);
#ifdef CONFIG_X86_IO_APIC
-extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity);
extern int mp_find_ioapic(int gsi);
extern int mp_find_ioapic_pin(int ioapic, int gsi);
-#else
-static inline int
-mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
- return 0;
-}
#endif
#else /* !CONFIG_ACPI: */
static inline int acpi_probe_gsi(void)
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -33,6 +33,7 @@
#include <linux/irq.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
+#include <linux/pci.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
@@ -1158,6 +1159,44 @@ void __init mp_config_acpi_legacy_irqs(v
}
}
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering,
+ int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+ struct mpc_intsrc mp_irq;
+ struct pci_dev *pdev;
+ unsigned char number;
+ unsigned int devfn;
+ int ioapic;
+ u8 pin;
+
+ if (!acpi_ioapic)
+ return 0;
+ if (!dev)
+ return 0;
+ if (dev->bus != &pci_bus_type)
+ return 0;
+
+ pdev = to_pci_dev(dev);
+ number = pdev->bus->number;
+ devfn = pdev->devfn;
+ pin = pdev->pin;
+ /* print the entry should happen on mptable identically */
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ mp_irq.srcbus = number;
+ mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
+ mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+ save_mp_irq(&mp_irq);
+#endif
+ return 0;
+}
+
int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
{
int ioapic;
@@ -1189,6 +1228,7 @@ int mp_register_gsi(struct device *dev,
ioapic_pin);
return gsi;
}
+ mp_config_acpi_gsi(dev, gsi, triggering, polarity);
/*
* Avoid pin reprogramming. PRTs typically include entries
@@ -1208,32 +1248,6 @@ int mp_register_gsi(struct device *dev,
return gsi;
}
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
- struct mpc_intsrc mp_irq;
- int ioapic;
-
- if (!acpi_ioapic)
- return 0;
-
- /* print the entry should happen on mptable identically */
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
- (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
- mp_irq.srcbus = number;
- mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
- ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
- mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
- save_mp_irq(&mp_irq);
-#endif
- return 0;
-}
-
/*
* Parse IOAPIC related entries in MADT
* returns 0 on success, < 0 on error
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 3/7] x86: fix alloc_mptable
2009-05-06 17:05 ` Yinghai Lu
@ 2009-05-06 17:07 ` Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:07 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
fix the condition checking.
[ Impact: make alloc_mptable working ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/mpparse.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -873,21 +873,24 @@ inline void __init check_irq_src(struct
static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length,
int count)
{
+ int ret = 0;
+
if (!mpc_new_phys) {
- pr_info("No spare slots, try to append...take your risk, "
+ pr_warning("No spare slots, try to append...take your risk, "
"new mpc_length %x\n", count);
} else {
- if (count <= mpc_new_length)
+ if (count <= mpc_new_length) {
pr_info("No spare slots, try to append..., "
"new mpc_length %x\n", count);
- else {
+ ret = 1;
+ } else {
pr_err("mpc_new_length %lx is too small\n",
mpc_new_length);
- return -1;
+ ret = -1;
}
}
- return 0;
+ return ret;
}
static int __init replace_intsrc_all(struct mpc_table *mpc,
@@ -946,7 +949,7 @@ static int __init replace_intsrc_all(st
} else {
struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
count += sizeof(struct mpc_intsrc);
- if (!check_slot(mpc_new_phys, mpc_new_length, count))
+ if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
goto out;
assign_to_mpc_intsrc(&mp_irqs[i], m);
mpc->length = count;
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 3/7] x86: fix alloc_mptable
@ 2009-05-06 17:07 ` Yinghai Lu
0 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:07 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes, Len Brown
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
fix the condition checking.
[ Impact: make alloc_mptable working ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/mpparse.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -873,21 +873,24 @@ inline void __init check_irq_src(struct
static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length,
int count)
{
+ int ret = 0;
+
if (!mpc_new_phys) {
- pr_info("No spare slots, try to append...take your risk, "
+ pr_warning("No spare slots, try to append...take your risk, "
"new mpc_length %x\n", count);
} else {
- if (count <= mpc_new_length)
+ if (count <= mpc_new_length) {
pr_info("No spare slots, try to append..., "
"new mpc_length %x\n", count);
- else {
+ ret = 1;
+ } else {
pr_err("mpc_new_length %lx is too small\n",
mpc_new_length);
- return -1;
+ ret = -1;
}
}
- return 0;
+ return ret;
}
static int __init replace_intsrc_all(struct mpc_table *mpc,
@@ -946,7 +949,7 @@ static int __init replace_intsrc_all(st
} else {
struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
count += sizeof(struct mpc_intsrc);
- if (!check_slot(mpc_new_phys, mpc_new_length, count))
+ if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
goto out;
assign_to_mpc_intsrc(&mp_irqs[i], m);
mpc->length = count;
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 4/7] x86/acpi: move pin_programmed bit map to io_apic.c
2009-05-06 17:05 ` Yinghai Lu
@ 2009-05-06 17:07 ` Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:07 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
prepare to call setup_io_apic_routing in pcibios_irq_enable
also remove not needed member apic_id.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/acpi/boot.c | 18 ++----------------
arch/x86/kernel/apic/io_apic.c | 25 ++++++++++++++++++++++++-
2 files changed, 26 insertions(+), 17 deletions(-)
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -904,10 +904,8 @@ extern int es7000_plat;
#endif
static struct {
- int apic_id;
int gsi_base;
int gsi_end;
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
} mp_ioapic_routing[MAX_IO_APICS];
int mp_find_ioapic(int gsi)
@@ -996,7 +994,6 @@ void __init mp_register_ioapic(int id, u
* Build basic GSI lookup table to facilitate gsi->io_apic lookups
* and to prevent reprogramming of IOAPIC pins (PCI GSIs).
*/
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
mp_ioapic_routing[idx].gsi_base = gsi_base;
mp_ioapic_routing[idx].gsi_end = gsi_base +
io_apic_get_redir_entries(idx);
@@ -1189,7 +1186,7 @@ static int mp_config_acpi_gsi(struct dev
mp_irq.srcbus = number;
mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
+ mp_irq.dstapic = mp_ioapics[ioapic].apicid;
mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
save_mp_irq(&mp_irq);
@@ -1224,23 +1221,12 @@ int mp_register_gsi(struct device *dev,
if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ "%d-%d\n", mp_ioapics[ioapic].apicid,
ioapic_pin);
return gsi;
}
mp_config_acpi_gsi(dev, gsi, triggering, polarity);
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- return gsi;
- }
- set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -3923,7 +3923,7 @@ int __init io_apic_get_version(int ioapi
}
#endif
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
int triggering, int polarity)
{
struct irq_desc *desc;
@@ -3960,6 +3960,29 @@ int io_apic_set_pci_routing(struct devic
return 0;
}
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[ioapic].apicid, pin);
+ return 0;
+ }
+ set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+ return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
+ triggering, polarity);
+}
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
{
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 4/7] x86/acpi: move pin_programmed bit map to io_apic.c
@ 2009-05-06 17:07 ` Yinghai Lu
0 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:07 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes, Len Brown
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
prepare to call setup_io_apic_routing in pcibios_irq_enable
also remove not needed member apic_id.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/acpi/boot.c | 18 ++----------------
arch/x86/kernel/apic/io_apic.c | 25 ++++++++++++++++++++++++-
2 files changed, 26 insertions(+), 17 deletions(-)
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -904,10 +904,8 @@ extern int es7000_plat;
#endif
static struct {
- int apic_id;
int gsi_base;
int gsi_end;
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
} mp_ioapic_routing[MAX_IO_APICS];
int mp_find_ioapic(int gsi)
@@ -996,7 +994,6 @@ void __init mp_register_ioapic(int id, u
* Build basic GSI lookup table to facilitate gsi->io_apic lookups
* and to prevent reprogramming of IOAPIC pins (PCI GSIs).
*/
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
mp_ioapic_routing[idx].gsi_base = gsi_base;
mp_ioapic_routing[idx].gsi_end = gsi_base +
io_apic_get_redir_entries(idx);
@@ -1189,7 +1186,7 @@ static int mp_config_acpi_gsi(struct dev
mp_irq.srcbus = number;
mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
+ mp_irq.dstapic = mp_ioapics[ioapic].apicid;
mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
save_mp_irq(&mp_irq);
@@ -1224,23 +1221,12 @@ int mp_register_gsi(struct device *dev,
if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ "%d-%d\n", mp_ioapics[ioapic].apicid,
ioapic_pin);
return gsi;
}
mp_config_acpi_gsi(dev, gsi, triggering, polarity);
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- return gsi;
- }
- set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -3923,7 +3923,7 @@ int __init io_apic_get_version(int ioapi
}
#endif
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
int triggering, int polarity)
{
struct irq_desc *desc;
@@ -3960,6 +3960,29 @@ int io_apic_set_pci_routing(struct devic
return 0;
}
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[ioapic].apicid, pin);
+ return 0;
+ }
+ set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+ return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
+ triggering, polarity);
+}
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
{
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector
2009-05-06 17:05 ` Yinghai Lu
@ 2009-05-06 17:08 ` Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:08 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
so prepare those params for pcibios_irq_enable to call setup_io_apic_routing
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/hw_irq.h | 4 +
arch/x86/kernel/apic/io_apic.c | 107 ++++++++++++++++++++------------------
arch/x86/pci/irq.c | 24 +++++++-
drivers/pci/hotplug/ibmphp_core.c | 52 +++++++++---------
4 files changed, 110 insertions(+), 77 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -874,54 +874,6 @@ static int __init find_isa_irq_apic(int
return -1;
}
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
- int apic, i, best_guess = -1;
-
- apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
- bus, slot, pin);
- if (test_bit(bus, mp_bus_not_pci)) {
- apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
- return -1;
- }
- for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].srcbus;
-
- for (apic = 0; apic < nr_ioapics; apic++)
- if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
- mp_irqs[i].dstapic == MP_APIC_ALL)
- break;
-
- if (!test_bit(lbus, mp_bus_not_pci) &&
- !mp_irqs[i].irqtype &&
- (bus == lbus) &&
- (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
- int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
-
- if (!(apic || IO_APIC_IRQ(irq)))
- continue;
-
- if (pin == (mp_irqs[i].srcbusirq & 3))
- return irq;
- /*
- * Use the first all-but-pin matching entry as a
- * best-guess fuzzy result for broken mptables.
- */
- if (best_guess < 0)
- best_guess = irq;
- }
- }
- return best_guess;
-}
-
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
/*
* EISA Edge/Level control register, ELCR
@@ -1140,6 +1092,65 @@ static int pin_2_irq(int idx, int apic,
return irq;
}
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
+ int *ioapic, int *ioapic_pin,
+ int *trigger, int *polarity)
+{
+ int apic, i, best_guess = -1;
+
+ apic_printk(APIC_DEBUG,
+ "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+ bus, slot, pin);
+ if (test_bit(bus, mp_bus_not_pci)) {
+ apic_printk(APIC_VERBOSE,
+ "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+ return -1;
+ }
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].srcbus;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+ mp_irqs[i].dstapic == MP_APIC_ALL)
+ break;
+
+ if (!test_bit(lbus, mp_bus_not_pci) &&
+ !mp_irqs[i].irqtype &&
+ (bus == lbus) &&
+ (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
+
+ if (!(apic || IO_APIC_IRQ(irq)))
+ continue;
+
+ if (pin == (mp_irqs[i].srcbusirq & 3)) {
+ *ioapic = apic;
+ *ioapic_pin = mp_irqs[i].dstirq;
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ return irq;
+ }
+ /*
+ * Use the first all-but-pin matching entry as a
+ * best-guess fuzzy result for broken mptables.
+ */
+ if (best_guess < 0) {
+ *ioapic = apic;
+ *ioapic_pin = mp_irqs[i].dstirq;
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ best_guess = irq;
+ }
+ }
+ }
+ return best_guess;
+}
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
void lock_vector_lock(void)
{
/* Used to the online set of cpus does not change
Index: linux-2.6/arch/x86/include/asm/hw_irq.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/hw_irq.h
+++ linux-2.6/arch/x86/include/asm/hw_irq.h
@@ -66,7 +66,9 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
+ int *ioapic, int *ioapic_pin,
+ int *trigger, int *polarity);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
Index: linux-2.6/drivers/pci/hotplug/ibmphp_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/ibmphp_core.c
+++ linux-2.6/drivers/pci/hotplug/ibmphp_core.c
@@ -153,45 +153,49 @@ int ibmphp_init_devno(struct slot **cur_
return -1;
}
for (loop = 0; loop < len; loop++) {
- if ((*cur_slot)->number == rtable->slots[loop].slot) {
- if ((*cur_slot)->bus == rtable->slots[loop].bus) {
+ if ((*cur_slot)->number == rtable->slots[loop].slot &&
+ (*cur_slot)->bus == rtable->slots[loop].bus) {
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
+
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
- (int) (*cur_slot)->device, i);
+ (int) (*cur_slot)->device, i.
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
- debug("(*cur_slot)->irq[0] = %x\n",
- (*cur_slot)->irq[0]);
- debug("(*cur_slot)->irq[1] = %x\n",
- (*cur_slot)->irq[1]);
- debug("(*cur_slot)->irq[2] = %x\n",
- (*cur_slot)->irq[2]);
- debug("(*cur_slot)->irq[3] = %x\n",
- (*cur_slot)->irq[3]);
+ debug("(*cur_slot)->irq[0] = %x\n",
+ (*cur_slot)->irq[0]);
+ debug("(*cur_slot)->irq[1] = %x\n",
+ (*cur_slot)->irq[1]);
+ debug("(*cur_slot)->irq[2] = %x\n",
+ (*cur_slot)->irq[2]);
+ debug("(*cur_slot)->irq[3] = %x\n",
+ (*cur_slot)->irq[3]);
- debug("rtable->exlusive_irqs = %x\n",
+ debug("rtable->exlusive_irqs = %x\n",
rtable->exclusive_irqs);
- debug("rtable->slots[loop].irq[0].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[0].bitmap = %x\n",
rtable->slots[loop].irq[0].bitmap);
- debug("rtable->slots[loop].irq[1].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[1].bitmap = %x\n",
rtable->slots[loop].irq[1].bitmap);
- debug("rtable->slots[loop].irq[2].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[2].bitmap = %x\n",
rtable->slots[loop].irq[2].bitmap);
- debug("rtable->slots[loop].irq[3].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[3].bitmap = %x\n",
rtable->slots[loop].irq[3].bitmap);
- debug("rtable->slots[loop].irq[0].link = %x\n",
+ debug("rtable->slots[loop].irq[0].link = %x\n",
rtable->slots[loop].irq[0].link);
- debug("rtable->slots[loop].irq[1].link = %x\n",
+ debug("rtable->slots[loop].irq[1].link = %x\n",
rtable->slots[loop].irq[1].link);
- debug("rtable->slots[loop].irq[2].link = %x\n",
+ debug("rtable->slots[loop].irq[2].link = %x\n",
rtable->slots[loop].irq[2].link);
- debug("rtable->slots[loop].irq[3].link = %x\n",
+ debug("rtable->slots[loop].irq[3].link = %x\n",
rtable->slots[loop].irq[3].link);
- debug("end of init_devno\n");
- kfree(rtable);
- return 0;
- }
+ debug("end of init_devno\n");
+ kfree(rtable);
+ return 0;
}
}
Index: linux-2.6/arch/x86/pci/irq.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/irq.c
+++ linux-2.6/arch/x86/pci/irq.c
@@ -1051,12 +1051,16 @@ static void __init pcibios_fixup_irqs(vo
*/
if (io_apic_assign_pci_irqs) {
int irq;
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
/*
* interrupt pins are numbered starting from 1
*/
irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin - 1);
+ PCI_SLOT(dev->devfn), pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
/*
* Busses behind bridges are typically not listed in the
* MP-table. In this case we have to look up the IRQ
@@ -1072,7 +1076,10 @@ static void __init pcibios_fixup_irqs(vo
pin = pci_swizzle_interrupt_pin(dev, pin);
bus = bridge->bus->number;
irq = IO_APIC_get_PCI_irq_vector(bus,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
if (irq >= 0)
dev_warn(&dev->dev,
"using bridge %s INT %c to "
@@ -1221,8 +1228,14 @@ static int pirq_enable_irq(struct pci_de
if (io_apic_assign_pci_irqs) {
int irq;
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1);
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1235,7 +1248,10 @@ static int pirq_enable_irq(struct pci_de
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector
@ 2009-05-06 17:08 ` Yinghai Lu
0 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:08 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes, Len Brown
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
so prepare those params for pcibios_irq_enable to call setup_io_apic_routing
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/hw_irq.h | 4 +
arch/x86/kernel/apic/io_apic.c | 107 ++++++++++++++++++++------------------
arch/x86/pci/irq.c | 24 +++++++-
drivers/pci/hotplug/ibmphp_core.c | 52 +++++++++---------
4 files changed, 110 insertions(+), 77 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -874,54 +874,6 @@ static int __init find_isa_irq_apic(int
return -1;
}
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
- int apic, i, best_guess = -1;
-
- apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
- bus, slot, pin);
- if (test_bit(bus, mp_bus_not_pci)) {
- apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
- return -1;
- }
- for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].srcbus;
-
- for (apic = 0; apic < nr_ioapics; apic++)
- if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
- mp_irqs[i].dstapic == MP_APIC_ALL)
- break;
-
- if (!test_bit(lbus, mp_bus_not_pci) &&
- !mp_irqs[i].irqtype &&
- (bus == lbus) &&
- (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
- int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
-
- if (!(apic || IO_APIC_IRQ(irq)))
- continue;
-
- if (pin == (mp_irqs[i].srcbusirq & 3))
- return irq;
- /*
- * Use the first all-but-pin matching entry as a
- * best-guess fuzzy result for broken mptables.
- */
- if (best_guess < 0)
- best_guess = irq;
- }
- }
- return best_guess;
-}
-
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
/*
* EISA Edge/Level control register, ELCR
@@ -1140,6 +1092,65 @@ static int pin_2_irq(int idx, int apic,
return irq;
}
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
+ int *ioapic, int *ioapic_pin,
+ int *trigger, int *polarity)
+{
+ int apic, i, best_guess = -1;
+
+ apic_printk(APIC_DEBUG,
+ "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+ bus, slot, pin);
+ if (test_bit(bus, mp_bus_not_pci)) {
+ apic_printk(APIC_VERBOSE,
+ "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+ return -1;
+ }
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].srcbus;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+ mp_irqs[i].dstapic == MP_APIC_ALL)
+ break;
+
+ if (!test_bit(lbus, mp_bus_not_pci) &&
+ !mp_irqs[i].irqtype &&
+ (bus == lbus) &&
+ (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
+
+ if (!(apic || IO_APIC_IRQ(irq)))
+ continue;
+
+ if (pin == (mp_irqs[i].srcbusirq & 3)) {
+ *ioapic = apic;
+ *ioapic_pin = mp_irqs[i].dstirq;
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ return irq;
+ }
+ /*
+ * Use the first all-but-pin matching entry as a
+ * best-guess fuzzy result for broken mptables.
+ */
+ if (best_guess < 0) {
+ *ioapic = apic;
+ *ioapic_pin = mp_irqs[i].dstirq;
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ best_guess = irq;
+ }
+ }
+ }
+ return best_guess;
+}
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
void lock_vector_lock(void)
{
/* Used to the online set of cpus does not change
Index: linux-2.6/arch/x86/include/asm/hw_irq.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/hw_irq.h
+++ linux-2.6/arch/x86/include/asm/hw_irq.h
@@ -66,7 +66,9 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
+ int *ioapic, int *ioapic_pin,
+ int *trigger, int *polarity);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
Index: linux-2.6/drivers/pci/hotplug/ibmphp_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/ibmphp_core.c
+++ linux-2.6/drivers/pci/hotplug/ibmphp_core.c
@@ -153,45 +153,49 @@ int ibmphp_init_devno(struct slot **cur_
return -1;
}
for (loop = 0; loop < len; loop++) {
- if ((*cur_slot)->number == rtable->slots[loop].slot) {
- if ((*cur_slot)->bus == rtable->slots[loop].bus) {
+ if ((*cur_slot)->number == rtable->slots[loop].slot &&
+ (*cur_slot)->bus == rtable->slots[loop].bus) {
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
+
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
- (int) (*cur_slot)->device, i);
+ (int) (*cur_slot)->device, i.
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
- debug("(*cur_slot)->irq[0] = %x\n",
- (*cur_slot)->irq[0]);
- debug("(*cur_slot)->irq[1] = %x\n",
- (*cur_slot)->irq[1]);
- debug("(*cur_slot)->irq[2] = %x\n",
- (*cur_slot)->irq[2]);
- debug("(*cur_slot)->irq[3] = %x\n",
- (*cur_slot)->irq[3]);
+ debug("(*cur_slot)->irq[0] = %x\n",
+ (*cur_slot)->irq[0]);
+ debug("(*cur_slot)->irq[1] = %x\n",
+ (*cur_slot)->irq[1]);
+ debug("(*cur_slot)->irq[2] = %x\n",
+ (*cur_slot)->irq[2]);
+ debug("(*cur_slot)->irq[3] = %x\n",
+ (*cur_slot)->irq[3]);
- debug("rtable->exlusive_irqs = %x\n",
+ debug("rtable->exlusive_irqs = %x\n",
rtable->exclusive_irqs);
- debug("rtable->slots[loop].irq[0].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[0].bitmap = %x\n",
rtable->slots[loop].irq[0].bitmap);
- debug("rtable->slots[loop].irq[1].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[1].bitmap = %x\n",
rtable->slots[loop].irq[1].bitmap);
- debug("rtable->slots[loop].irq[2].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[2].bitmap = %x\n",
rtable->slots[loop].irq[2].bitmap);
- debug("rtable->slots[loop].irq[3].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[3].bitmap = %x\n",
rtable->slots[loop].irq[3].bitmap);
- debug("rtable->slots[loop].irq[0].link = %x\n",
+ debug("rtable->slots[loop].irq[0].link = %x\n",
rtable->slots[loop].irq[0].link);
- debug("rtable->slots[loop].irq[1].link = %x\n",
+ debug("rtable->slots[loop].irq[1].link = %x\n",
rtable->slots[loop].irq[1].link);
- debug("rtable->slots[loop].irq[2].link = %x\n",
+ debug("rtable->slots[loop].irq[2].link = %x\n",
rtable->slots[loop].irq[2].link);
- debug("rtable->slots[loop].irq[3].link = %x\n",
+ debug("rtable->slots[loop].irq[3].link = %x\n",
rtable->slots[loop].irq[3].link);
- debug("end of init_devno\n");
- kfree(rtable);
- return 0;
- }
+ debug("end of init_devno\n");
+ kfree(rtable);
+ return 0;
}
}
Index: linux-2.6/arch/x86/pci/irq.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/irq.c
+++ linux-2.6/arch/x86/pci/irq.c
@@ -1051,12 +1051,16 @@ static void __init pcibios_fixup_irqs(vo
*/
if (io_apic_assign_pci_irqs) {
int irq;
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
/*
* interrupt pins are numbered starting from 1
*/
irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin - 1);
+ PCI_SLOT(dev->devfn), pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
/*
* Busses behind bridges are typically not listed in the
* MP-table. In this case we have to look up the IRQ
@@ -1072,7 +1076,10 @@ static void __init pcibios_fixup_irqs(vo
pin = pci_swizzle_interrupt_pin(dev, pin);
bus = bridge->bus->number;
irq = IO_APIC_get_PCI_irq_vector(bus,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
if (irq >= 0)
dev_warn(&dev->dev,
"using bridge %s INT %c to "
@@ -1221,8 +1228,14 @@ static int pirq_enable_irq(struct pci_de
if (io_apic_assign_pci_irqs) {
int irq;
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1);
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1235,7 +1248,10 @@ static int pirq_enable_irq(struct pci_de
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 6/7] x86/acpi: move setup io apic routing out of ACPI macro scope
2009-05-06 17:05 ` Yinghai Lu
@ 2009-05-06 17:08 ` Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:08 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
so we could set io apic routing when ACPI is not set
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/io_apic.h | 4 -
arch/x86/kernel/apic/io_apic.c | 122 ++++++++++++++++++++---------------------
2 files changed, 63 insertions(+), 63 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -3840,6 +3840,67 @@ int __init arch_probe_nr_irqs(void)
}
#endif
+static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+ struct irq_desc *desc;
+ struct irq_cfg *cfg;
+ int node;
+
+ if (!IO_APIC_IRQ(irq)) {
+ apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+ ioapic);
+ return -EINVAL;
+ }
+
+ if (dev)
+ node = dev_to_node(dev);
+ else
+ node = cpu_to_node(boot_cpu_id);
+
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc %d\n", irq);
+ return 0;
+ }
+
+ /*
+ * IRQs < 16 are already in the irq_2_pin[] map
+ */
+ if (irq >= NR_IRQS_LEGACY) {
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, ioapic, pin);
+ }
+
+ setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
+
+ return 0;
+}
+
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[ioapic].apicid, pin);
+ return 0;
+ }
+ set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+ return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
+ triggering, polarity);
+}
+
/* --------------------------------------------------------------------------
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
@@ -3934,67 +3995,6 @@ int __init io_apic_get_version(int ioapi
}
#endif
-static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
-{
- struct irq_desc *desc;
- struct irq_cfg *cfg;
- int node;
-
- if (!IO_APIC_IRQ(irq)) {
- apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
- ioapic);
- return -EINVAL;
- }
-
- if (dev)
- node = dev_to_node(dev);
- else
- node = cpu_to_node(boot_cpu_id);
-
- desc = irq_to_desc_alloc_node(irq, node);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc %d\n", irq);
- return 0;
- }
-
- /*
- * IRQs < 16 are already in the irq_2_pin[] map
- */
- if (irq >= NR_IRQS_LEGACY) {
- cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, ioapic, pin);
- }
-
- setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
-
- return 0;
-}
-
-static struct {
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
-{
-
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapics[ioapic].apicid, pin);
- return 0;
- }
- set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
-
- return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
- triggering, polarity);
-}
-
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
{
int i;
Index: linux-2.6/arch/x86/include/asm/io_apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/io_apic.h
+++ linux-2.6/arch/x86/include/asm/io_apic.h
@@ -154,10 +154,10 @@ extern int timer_through_8259;
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
- int irq, int edge_level, int active_high_low);
#endif /* CONFIG_ACPI */
+extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
+ int irq, int edge_level, int active_high_low);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 6/7] x86/acpi: move setup io apic routing out of ACPI macro scope
@ 2009-05-06 17:08 ` Yinghai Lu
0 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:08 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes, Len Brown
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
so we could set io apic routing when ACPI is not set
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/io_apic.h | 4 -
arch/x86/kernel/apic/io_apic.c | 122 ++++++++++++++++++++---------------------
2 files changed, 63 insertions(+), 63 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -3840,6 +3840,67 @@ int __init arch_probe_nr_irqs(void)
}
#endif
+static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+ struct irq_desc *desc;
+ struct irq_cfg *cfg;
+ int node;
+
+ if (!IO_APIC_IRQ(irq)) {
+ apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+ ioapic);
+ return -EINVAL;
+ }
+
+ if (dev)
+ node = dev_to_node(dev);
+ else
+ node = cpu_to_node(boot_cpu_id);
+
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc %d\n", irq);
+ return 0;
+ }
+
+ /*
+ * IRQs < 16 are already in the irq_2_pin[] map
+ */
+ if (irq >= NR_IRQS_LEGACY) {
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, ioapic, pin);
+ }
+
+ setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
+
+ return 0;
+}
+
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[ioapic].apicid, pin);
+ return 0;
+ }
+ set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+ return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
+ triggering, polarity);
+}
+
/* --------------------------------------------------------------------------
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
@@ -3934,67 +3995,6 @@ int __init io_apic_get_version(int ioapi
}
#endif
-static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
-{
- struct irq_desc *desc;
- struct irq_cfg *cfg;
- int node;
-
- if (!IO_APIC_IRQ(irq)) {
- apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
- ioapic);
- return -EINVAL;
- }
-
- if (dev)
- node = dev_to_node(dev);
- else
- node = cpu_to_node(boot_cpu_id);
-
- desc = irq_to_desc_alloc_node(irq, node);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc %d\n", irq);
- return 0;
- }
-
- /*
- * IRQs < 16 are already in the irq_2_pin[] map
- */
- if (irq >= NR_IRQS_LEGACY) {
- cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, ioapic, pin);
- }
-
- setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
-
- return 0;
-}
-
-static struct {
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
-{
-
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapics[ioapic].apicid, pin);
- return 0;
- }
- set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
-
- return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
- triggering, polarity);
-}
-
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
{
int i;
Index: linux-2.6/arch/x86/include/asm/io_apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/io_apic.h
+++ linux-2.6/arch/x86/include/asm/io_apic.h
@@ -154,10 +154,10 @@ extern int timer_through_8259;
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
- int irq, int edge_level, int active_high_low);
#endif /* CONFIG_ACPI */
+extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
+ int irq, int edge_level, int active_high_low);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 7/7] x86/pci: update pirq_enable_irq to setup io apic routing -v2
2009-05-06 17:05 ` Yinghai Lu
@ 2009-05-06 17:10 ` Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:10 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
so we could set io apic routing only when enable device irq.
also could make setup_IO_APIC_irqs and setup_ioapic_dest only handle
first ioapic...
v2: remove one one not needed style change.
merge the patch only setup io_apic for acpi on in setup_IO_APIC_irqs
[ Impact: make mptable irq enable more like acpi is used, and numa_irq_desc could get correct node when acpi=off ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/apic/io_apic.c | 148 ++++++++++++++++++++---------------------
arch/x86/pci/irq.c | 84 ++++++++---------------
2 files changed, 103 insertions(+), 129 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -1481,9 +1481,13 @@ static void setup_IO_APIC_irq(int apic_i
ioapic_write_entry(apic_id, pin, entry);
}
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
static void __init setup_IO_APIC_irqs(void)
{
- int apic_id, pin, idx, irq;
+ int apic_id = 0, pin, idx, irq;
int notcon = 0;
struct irq_desc *desc;
struct irq_cfg *cfg;
@@ -1491,48 +1495,53 @@ static void __init setup_IO_APIC_irqs(vo
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
- for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
- for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic) {
+ apic_id = mp_find_ioapic(0);
+ if (apic_id < 0)
+ apic_id = 0;
+ }
+#endif
- idx = find_irq_entry(apic_id, pin, mp_INT);
- if (idx == -1) {
- if (!notcon) {
- notcon = 1;
- apic_printk(APIC_VERBOSE,
- KERN_DEBUG " %d-%d",
- mp_ioapics[apic_id].apicid, pin);
- } else
- apic_printk(APIC_VERBOSE, " %d-%d",
- mp_ioapics[apic_id].apicid, pin);
- continue;
- }
- if (notcon) {
+ for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
+ idx = find_irq_entry(apic_id, pin, mp_INT);
+ if (idx == -1) {
+ if (!notcon) {
+ notcon = 1;
apic_printk(APIC_VERBOSE,
- " (apicid-pin) not connected\n");
- notcon = 0;
- }
+ KERN_DEBUG " %d-%d",
+ mp_ioapics[apic_id].apicid, pin);
+ } else
+ apic_printk(APIC_VERBOSE, " %d-%d",
+ mp_ioapics[apic_id].apicid, pin);
+ continue;
+ }
+ if (notcon) {
+ apic_printk(APIC_VERBOSE,
+ " (apicid-pin) not connected\n");
+ notcon = 0;
+ }
- irq = pin_2_irq(idx, apic_id, pin);
+ irq = pin_2_irq(idx, apic_id, pin);
- /*
- * Skip the timer IRQ if there's a quirk handler
- * installed and if it returns 1:
- */
- if (apic->multi_timer_check &&
- apic->multi_timer_check(apic_id, irq))
- continue;
-
- desc = irq_to_desc_alloc_node(irq, node);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc for %d\n", irq);
- continue;
- }
- cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, apic_id, pin);
+ /*
+ * Skip the timer IRQ if there's a quirk handler
+ * installed and if it returns 1:
+ */
+ if (apic->multi_timer_check &&
+ apic->multi_timer_check(apic_id, irq))
+ continue;
- setup_IO_APIC_irq(apic_id, pin, irq, desc,
- irq_trigger(idx), irq_polarity(idx));
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+ continue;
}
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, apic_id, pin);
+ set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed);
+ setup_IO_APIC_irq(apic_id, pin, irq, desc,
+ irq_trigger(idx), irq_polarity(idx));
}
if (notcon)
@@ -3877,10 +3886,6 @@ static int __io_apic_set_pci_routing(str
return 0;
}
-static struct {
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
-} mp_ioapic_routing[MAX_IO_APICS];
-
int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
int triggering, int polarity)
{
@@ -4024,51 +4029,44 @@ int acpi_get_override_irq(int bus_irq, i
#ifdef CONFIG_SMP
void __init setup_ioapic_dest(void)
{
- int pin, ioapic, irq, irq_entry;
+ int pin, ioapic = 0, irq, irq_entry;
struct irq_desc *desc;
- struct irq_cfg *cfg;
const struct cpumask *mask;
if (skip_ioapic_setup == 1)
return;
- for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
- for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
- irq_entry = find_irq_entry(ioapic, pin, mp_INT);
- if (irq_entry == -1)
- continue;
- irq = pin_2_irq(irq_entry, ioapic, pin);
-
- /* setup_IO_APIC_irqs could fail to get vector for some device
- * when you have too many devices, because at that time only boot
- * cpu is online.
- */
- desc = irq_to_desc(irq);
- cfg = desc->chip_data;
- if (!cfg->vector) {
- setup_IO_APIC_irq(ioapic, pin, irq, desc,
- irq_trigger(irq_entry),
- irq_polarity(irq_entry));
- continue;
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic) {
+ ioapic = mp_find_ioapic(0);
+ if (ioapic < 0)
+ ioapic = 0;
+ }
+#endif
- }
+ for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+ irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+ if (irq_entry == -1)
+ continue;
+ irq = pin_2_irq(irq_entry, ioapic, pin);
- /*
- * Honour affinities which have been set in early boot
- */
- if (desc->status &
- (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
- mask = desc->affinity;
- else
- mask = apic->target_cpus();
+ desc = irq_to_desc(irq);
- if (intr_remapping_enabled)
- set_ir_ioapic_affinity_irq_desc(desc, mask);
- else
- set_ioapic_affinity_irq_desc(desc, mask);
- }
+ /*
+ * Honour affinities which have been set in early boot
+ */
+ if (desc->status &
+ (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+ mask = desc->affinity;
+ else
+ mask = apic->target_cpus();
+ if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq_desc(desc, mask);
+ else
+ set_ioapic_affinity_irq_desc(desc, mask);
}
+
}
#endif
Index: linux-2.6/arch/x86/pci/irq.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/irq.c
+++ linux-2.6/arch/x86/pci/irq.c
@@ -889,6 +889,9 @@ static int pcibios_lookup_irq(struct pci
return 0;
}
+ if (io_apic_assign_pci_irqs)
+ return 0;
+
/* Find IRQ routing entry */
if (!pirq_table)
@@ -1039,63 +1042,15 @@ static void __init pcibios_fixup_irqs(vo
pirq_penalty[dev->irq]++;
}
+ if (io_apic_assign_pci_irqs)
+ return;
+
dev = NULL;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (!pin)
continue;
-#ifdef CONFIG_X86_IO_APIC
- /*
- * Recalculate IRQ numbers if we use the I/O APIC.
- */
- if (io_apic_assign_pci_irqs) {
- int irq;
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
-
- /*
- * interrupt pins are numbered starting from 1
- */
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
- /*
- * Busses behind bridges are typically not listed in the
- * MP-table. In this case we have to look up the IRQ
- * based on the parent bus, parent slot, and pin number.
- * The SMP code detects such bridged busses itself so we
- * should get into this branch reliably.
- */
- if (irq < 0 && dev->bus->parent) {
- /* go back to the bridge */
- struct pci_dev *bridge = dev->bus->self;
- int bus;
-
- pin = pci_swizzle_interrupt_pin(dev, pin);
- bus = bridge->bus->number;
- irq = IO_APIC_get_PCI_irq_vector(bus,
- PCI_SLOT(bridge->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
- if (irq >= 0)
- dev_warn(&dev->dev,
- "using bridge %s INT %c to "
- "get IRQ %d\n",
- pci_name(bridge),
- 'A' + pin - 1, irq);
- }
- if (irq >= 0) {
- dev_info(&dev->dev,
- "PCI->APIC IRQ transform: INT %c "
- "-> IRQ %d\n",
- 'A' + pin - 1, irq);
- dev->irq = irq;
- }
- }
-#endif
/*
* Still no IRQ? Try to lookup one...
*/
@@ -1190,6 +1145,19 @@ int __init pcibios_irq_init(void)
pcibios_enable_irq = pirq_enable_irq;
pcibios_fixup_irqs();
+
+ if (io_apic_assign_pci_irqs && pci_routeirq) {
+ struct pci_dev *dev = NULL;
+ /*
+ * PCI IRQ routing is set up by pci_enable_device(), but we
+ * also do it here in case there are still broken drivers that
+ * don't use pci_enable_device().
+ */
+ printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
+ for_each_pci_dev(dev)
+ pirq_enable_irq(dev);
+ }
+
return 0;
}
@@ -1220,13 +1188,17 @@ void pcibios_penalize_isa_irq(int irq, i
static int pirq_enable_irq(struct pci_dev *dev)
{
u8 pin;
- struct pci_dev *temp_dev;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
+ if (pin && !pcibios_lookup_irq(dev, 1)) {
char *msg = "";
+ if (!io_apic_assign_pci_irqs && dev->irq)
+ return 0;
+
if (io_apic_assign_pci_irqs) {
+#ifdef CONFIG_X86_IO_APIC
+ struct pci_dev *temp_dev;
int irq;
int ioapic = -1, ioapic_pin = -1;
int triggering, polarity;
@@ -1261,12 +1233,16 @@ static int pirq_enable_irq(struct pci_de
}
dev = temp_dev;
if (irq >= 0) {
+ io_apic_set_pci_routing(&dev->dev, ioapic,
+ ioapic_pin, irq,
+ triggering, polarity);
+ dev->irq = irq;
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
- dev->irq = irq;
return 0;
} else
msg = "; probably buggy MP table";
+#endif
} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
msg = "";
else
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 7/7] x86/pci: update pirq_enable_irq to setup io apic routing -v2
@ 2009-05-06 17:10 ` Yinghai Lu
0 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-06 17:10 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes, Len Brown
Cc: linux-kernel, linux-pci, ACPI Devel Maling List
so we could set io apic routing only when enable device irq.
also could make setup_IO_APIC_irqs and setup_ioapic_dest only handle
first ioapic...
v2: remove one one not needed style change.
merge the patch only setup io_apic for acpi on in setup_IO_APIC_irqs
[ Impact: make mptable irq enable more like acpi is used, and numa_irq_desc could get correct node when acpi=off ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/kernel/apic/io_apic.c | 148 ++++++++++++++++++++---------------------
arch/x86/pci/irq.c | 84 ++++++++---------------
2 files changed, 103 insertions(+), 129 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -1481,9 +1481,13 @@ static void setup_IO_APIC_irq(int apic_i
ioapic_write_entry(apic_id, pin, entry);
}
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
static void __init setup_IO_APIC_irqs(void)
{
- int apic_id, pin, idx, irq;
+ int apic_id = 0, pin, idx, irq;
int notcon = 0;
struct irq_desc *desc;
struct irq_cfg *cfg;
@@ -1491,48 +1495,53 @@ static void __init setup_IO_APIC_irqs(vo
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
- for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
- for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic) {
+ apic_id = mp_find_ioapic(0);
+ if (apic_id < 0)
+ apic_id = 0;
+ }
+#endif
- idx = find_irq_entry(apic_id, pin, mp_INT);
- if (idx == -1) {
- if (!notcon) {
- notcon = 1;
- apic_printk(APIC_VERBOSE,
- KERN_DEBUG " %d-%d",
- mp_ioapics[apic_id].apicid, pin);
- } else
- apic_printk(APIC_VERBOSE, " %d-%d",
- mp_ioapics[apic_id].apicid, pin);
- continue;
- }
- if (notcon) {
+ for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
+ idx = find_irq_entry(apic_id, pin, mp_INT);
+ if (idx == -1) {
+ if (!notcon) {
+ notcon = 1;
apic_printk(APIC_VERBOSE,
- " (apicid-pin) not connected\n");
- notcon = 0;
- }
+ KERN_DEBUG " %d-%d",
+ mp_ioapics[apic_id].apicid, pin);
+ } else
+ apic_printk(APIC_VERBOSE, " %d-%d",
+ mp_ioapics[apic_id].apicid, pin);
+ continue;
+ }
+ if (notcon) {
+ apic_printk(APIC_VERBOSE,
+ " (apicid-pin) not connected\n");
+ notcon = 0;
+ }
- irq = pin_2_irq(idx, apic_id, pin);
+ irq = pin_2_irq(idx, apic_id, pin);
- /*
- * Skip the timer IRQ if there's a quirk handler
- * installed and if it returns 1:
- */
- if (apic->multi_timer_check &&
- apic->multi_timer_check(apic_id, irq))
- continue;
-
- desc = irq_to_desc_alloc_node(irq, node);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc for %d\n", irq);
- continue;
- }
- cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, apic_id, pin);
+ /*
+ * Skip the timer IRQ if there's a quirk handler
+ * installed and if it returns 1:
+ */
+ if (apic->multi_timer_check &&
+ apic->multi_timer_check(apic_id, irq))
+ continue;
- setup_IO_APIC_irq(apic_id, pin, irq, desc,
- irq_trigger(idx), irq_polarity(idx));
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+ continue;
}
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, apic_id, pin);
+ set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed);
+ setup_IO_APIC_irq(apic_id, pin, irq, desc,
+ irq_trigger(idx), irq_polarity(idx));
}
if (notcon)
@@ -3877,10 +3886,6 @@ static int __io_apic_set_pci_routing(str
return 0;
}
-static struct {
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
-} mp_ioapic_routing[MAX_IO_APICS];
-
int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
int triggering, int polarity)
{
@@ -4024,51 +4029,44 @@ int acpi_get_override_irq(int bus_irq, i
#ifdef CONFIG_SMP
void __init setup_ioapic_dest(void)
{
- int pin, ioapic, irq, irq_entry;
+ int pin, ioapic = 0, irq, irq_entry;
struct irq_desc *desc;
- struct irq_cfg *cfg;
const struct cpumask *mask;
if (skip_ioapic_setup == 1)
return;
- for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
- for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
- irq_entry = find_irq_entry(ioapic, pin, mp_INT);
- if (irq_entry == -1)
- continue;
- irq = pin_2_irq(irq_entry, ioapic, pin);
-
- /* setup_IO_APIC_irqs could fail to get vector for some device
- * when you have too many devices, because at that time only boot
- * cpu is online.
- */
- desc = irq_to_desc(irq);
- cfg = desc->chip_data;
- if (!cfg->vector) {
- setup_IO_APIC_irq(ioapic, pin, irq, desc,
- irq_trigger(irq_entry),
- irq_polarity(irq_entry));
- continue;
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic) {
+ ioapic = mp_find_ioapic(0);
+ if (ioapic < 0)
+ ioapic = 0;
+ }
+#endif
- }
+ for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+ irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+ if (irq_entry == -1)
+ continue;
+ irq = pin_2_irq(irq_entry, ioapic, pin);
- /*
- * Honour affinities which have been set in early boot
- */
- if (desc->status &
- (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
- mask = desc->affinity;
- else
- mask = apic->target_cpus();
+ desc = irq_to_desc(irq);
- if (intr_remapping_enabled)
- set_ir_ioapic_affinity_irq_desc(desc, mask);
- else
- set_ioapic_affinity_irq_desc(desc, mask);
- }
+ /*
+ * Honour affinities which have been set in early boot
+ */
+ if (desc->status &
+ (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+ mask = desc->affinity;
+ else
+ mask = apic->target_cpus();
+ if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq_desc(desc, mask);
+ else
+ set_ioapic_affinity_irq_desc(desc, mask);
}
+
}
#endif
Index: linux-2.6/arch/x86/pci/irq.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/irq.c
+++ linux-2.6/arch/x86/pci/irq.c
@@ -889,6 +889,9 @@ static int pcibios_lookup_irq(struct pci
return 0;
}
+ if (io_apic_assign_pci_irqs)
+ return 0;
+
/* Find IRQ routing entry */
if (!pirq_table)
@@ -1039,63 +1042,15 @@ static void __init pcibios_fixup_irqs(vo
pirq_penalty[dev->irq]++;
}
+ if (io_apic_assign_pci_irqs)
+ return;
+
dev = NULL;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (!pin)
continue;
-#ifdef CONFIG_X86_IO_APIC
- /*
- * Recalculate IRQ numbers if we use the I/O APIC.
- */
- if (io_apic_assign_pci_irqs) {
- int irq;
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
-
- /*
- * interrupt pins are numbered starting from 1
- */
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
- /*
- * Busses behind bridges are typically not listed in the
- * MP-table. In this case we have to look up the IRQ
- * based on the parent bus, parent slot, and pin number.
- * The SMP code detects such bridged busses itself so we
- * should get into this branch reliably.
- */
- if (irq < 0 && dev->bus->parent) {
- /* go back to the bridge */
- struct pci_dev *bridge = dev->bus->self;
- int bus;
-
- pin = pci_swizzle_interrupt_pin(dev, pin);
- bus = bridge->bus->number;
- irq = IO_APIC_get_PCI_irq_vector(bus,
- PCI_SLOT(bridge->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
- if (irq >= 0)
- dev_warn(&dev->dev,
- "using bridge %s INT %c to "
- "get IRQ %d\n",
- pci_name(bridge),
- 'A' + pin - 1, irq);
- }
- if (irq >= 0) {
- dev_info(&dev->dev,
- "PCI->APIC IRQ transform: INT %c "
- "-> IRQ %d\n",
- 'A' + pin - 1, irq);
- dev->irq = irq;
- }
- }
-#endif
/*
* Still no IRQ? Try to lookup one...
*/
@@ -1190,6 +1145,19 @@ int __init pcibios_irq_init(void)
pcibios_enable_irq = pirq_enable_irq;
pcibios_fixup_irqs();
+
+ if (io_apic_assign_pci_irqs && pci_routeirq) {
+ struct pci_dev *dev = NULL;
+ /*
+ * PCI IRQ routing is set up by pci_enable_device(), but we
+ * also do it here in case there are still broken drivers that
+ * don't use pci_enable_device().
+ */
+ printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
+ for_each_pci_dev(dev)
+ pirq_enable_irq(dev);
+ }
+
return 0;
}
@@ -1220,13 +1188,17 @@ void pcibios_penalize_isa_irq(int irq, i
static int pirq_enable_irq(struct pci_dev *dev)
{
u8 pin;
- struct pci_dev *temp_dev;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
+ if (pin && !pcibios_lookup_irq(dev, 1)) {
char *msg = "";
+ if (!io_apic_assign_pci_irqs && dev->irq)
+ return 0;
+
if (io_apic_assign_pci_irqs) {
+#ifdef CONFIG_X86_IO_APIC
+ struct pci_dev *temp_dev;
int irq;
int ioapic = -1, ioapic_pin = -1;
int triggering, polarity;
@@ -1261,12 +1233,16 @@ static int pirq_enable_irq(struct pci_de
}
dev = temp_dev;
if (irq >= 0) {
+ io_apic_set_pci_routing(&dev->dev, ioapic,
+ ioapic_pin, irq,
+ triggering, polarity);
+ dev->irq = irq;
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
- dev->irq = irq;
return 0;
} else
msg = "; probably buggy MP table";
+#endif
} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
msg = "";
else
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector
2009-05-06 17:08 ` Yinghai Lu
(?)
@ 2009-05-07 14:10 ` Ingo Molnar
-1 siblings, 0 replies; 37+ messages in thread
From: Ingo Molnar @ 2009-05-07 14:10 UTC (permalink / raw)
To: Yinghai Lu
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
* Yinghai Lu <yinghai@kernel.org> wrote:
> so prepare those params for pcibios_irq_enable to call setup_io_apic_routing
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>
> ---
> arch/x86/include/asm/hw_irq.h | 4 +
> arch/x86/kernel/apic/io_apic.c | 107 ++++++++++++++++++++------------------
> arch/x86/pci/irq.c | 24 +++++++-
> drivers/pci/hotplug/ibmphp_core.c | 52 +++++++++---------
> 4 files changed, 110 insertions(+), 77 deletions(-)
Hm, didnt Jesse ack this already? If yes then it would be nice to
have that Acked-by tag line in the changelog.
Ingo
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH 7/7] x86/pci: update pirq_enable_irq to setup io apic routing -v2
2009-05-06 17:10 ` Yinghai Lu
(?)
@ 2009-05-07 14:12 ` Ingo Molnar
2009-05-07 16:52 ` Jesse Barnes
-1 siblings, 1 reply; 37+ messages in thread
From: Ingo Molnar @ 2009-05-07 14:12 UTC (permalink / raw)
To: Yinghai Lu
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
* Yinghai Lu <yinghai@kernel.org> wrote:
>
> so we could set io apic routing only when enable device irq.
>
> also could make setup_IO_APIC_irqs and setup_ioapic_dest only handle
> first ioapic...
>
> v2: remove one one not needed style change.
> merge the patch only setup io_apic for acpi on in setup_IO_APIC_irqs
>
> [ Impact: make mptable irq enable more like acpi is used, and numa_irq_desc could get correct node when acpi=off ]
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>
> ---
> arch/x86/kernel/apic/io_apic.c | 148 ++++++++++++++++++++---------------------
> arch/x86/pci/irq.c | 84 ++++++++---------------
> 2 files changed, 103 insertions(+), 129 deletions(-)
Jesse, did this patch have your Acked-by?
Ingo
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH 7/7] x86/pci: update pirq_enable_irq to setup io apic routing -v2
2009-05-07 14:12 ` Ingo Molnar
@ 2009-05-07 16:52 ` Jesse Barnes
2009-05-11 7:49 ` Ingo Molnar
0 siblings, 1 reply; 37+ messages in thread
From: Jesse Barnes @ 2009-05-07 16:52 UTC (permalink / raw)
To: Ingo Molnar
Cc: Yinghai Lu, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
On Thu, 7 May 2009 16:12:22 +0200
Ingo Molnar <mingo@elte.hu> wrote:
>
> * Yinghai Lu <yinghai@kernel.org> wrote:
>
> >
> > so we could set io apic routing only when enable device irq.
> >
> > also could make setup_IO_APIC_irqs and setup_ioapic_dest only handle
> > first ioapic...
> >
> > v2: remove one one not needed style change.
> > merge the patch only setup io_apic for acpi on in
> > setup_IO_APIC_irqs
> >
> > [ Impact: make mptable irq enable more like acpi is used, and
> > numa_irq_desc could get correct node when acpi=off ]
> >
> > Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >
> > ---
> > arch/x86/kernel/apic/io_apic.c | 148
> > ++++++++++++++++++++---------------------
> > arch/x86/pci/irq.c | 84 ++++++++--------------- 2
> > files changed, 103 insertions(+), 129 deletions(-)
>
> Jesse, did this patch have your Acked-by?
Yeah, both of them are fine with me. Ultimately you get to keep any
broken pieces from io_apic changes anyway, right? :)
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH 7/7] x86/pci: update pirq_enable_irq to setup io apic routing -v2
2009-05-07 16:52 ` Jesse Barnes
@ 2009-05-11 7:49 ` Ingo Molnar
0 siblings, 0 replies; 37+ messages in thread
From: Ingo Molnar @ 2009-05-11 7:49 UTC (permalink / raw)
To: Jesse Barnes
Cc: Yinghai Lu, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
* Jesse Barnes <jbarnes@virtuousgeek.org> wrote:
> On Thu, 7 May 2009 16:12:22 +0200
> Ingo Molnar <mingo@elte.hu> wrote:
>
> >
> > * Yinghai Lu <yinghai@kernel.org> wrote:
> >
> > >
> > > so we could set io apic routing only when enable device irq.
> > >
> > > also could make setup_IO_APIC_irqs and setup_ioapic_dest only handle
> > > first ioapic...
> > >
> > > v2: remove one one not needed style change.
> > > merge the patch only setup io_apic for acpi on in
> > > setup_IO_APIC_irqs
> > >
> > > [ Impact: make mptable irq enable more like acpi is used, and
> > > numa_irq_desc could get correct node when acpi=off ]
> > >
> > > Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> > >
> > > ---
> > > arch/x86/kernel/apic/io_apic.c | 148
> > > ++++++++++++++++++++---------------------
> > > arch/x86/pci/irq.c | 84 ++++++++--------------- 2
> > > files changed, 103 insertions(+), 129 deletions(-)
> >
> > Jesse, did this patch have your Acked-by?
>
> Yeah, both of them are fine with me. Ultimately you get to keep
> any broken pieces from io_apic changes anyway, right? :)
Yeah, generally. But the wider the blame can be spread when it does
break, the better! ;-)
> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Thanks!
Ingo
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH 3/7] x86: fix alloc_mptable
2009-05-06 17:07 ` Yinghai Lu
(?)
@ 2009-05-11 8:22 ` Ingo Molnar
-1 siblings, 0 replies; 37+ messages in thread
From: Ingo Molnar @ 2009-05-11 8:22 UTC (permalink / raw)
To: Yinghai Lu
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
* Yinghai Lu <yinghai@kernel.org> wrote:
> fix the condition checking.
>
> [ Impact: make alloc_mptable working ]
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>
> ---
> arch/x86/kernel/mpparse.c | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> Index: linux-2.6/arch/x86/kernel/mpparse.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/kernel/mpparse.c
> +++ linux-2.6/arch/x86/kernel/mpparse.c
> @@ -873,21 +873,24 @@ inline void __init check_irq_src(struct
> static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length,
> int count)
> {
> + int ret = 0;
> +
> if (!mpc_new_phys) {
> - pr_info("No spare slots, try to append...take your risk, "
> + pr_warning("No spare slots, try to append...take your risk, "
> "new mpc_length %x\n", count);
> } else {
> - if (count <= mpc_new_length)
> + if (count <= mpc_new_length) {
> pr_info("No spare slots, try to append..., "
> "new mpc_length %x\n", count);
> - else {
> + ret = 1;
> + } else {
> pr_err("mpc_new_length %lx is too small\n",
> mpc_new_length);
> - return -1;
> + ret = -1;
> }
> }
>
> - return 0;
> + return ret;
> }
>
> static int __init replace_intsrc_all(struct mpc_table *mpc,
> @@ -946,7 +949,7 @@ static int __init replace_intsrc_all(st
> } else {
> struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
> count += sizeof(struct mpc_intsrc);
> - if (!check_slot(mpc_new_phys, mpc_new_length, count))
> + if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
> goto out;
> assign_to_mpc_intsrc(&mp_irqs[i], m);
> mpc->length = count;
hm, i modified this to the code attached below instead. Things like:
> - pr_info("No spare slots, try to append...take your risk, "
> + pr_warning("No spare slots, try to append...take your risk, "
> "new mpc_length %x\n", count);
are not acceptable at all. If there's _anything_ wrong with code
like this, if we run out of a static pool of slots, we dont try to
hack our way out of it... Instead we inform the user and bail out
ASAP!
A predictable, well working way out of a resource shortage is _way_
more important than trying to clinge to some functionality and
hoping that it will be all fine ...
So ... please describe under which conditions we can run out of
slots, and what the options are in that situation.
Ingo
------------------------------>
Subject: x86: fix alloc_mptable()
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 06 May 2009 10:07:07 -0700
Fix the conditions when we stop updating the mptable due to
running out of slots.
[ Impact: fix memory corruption / non-working update_mptable boot parameter ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C3BB.1000609@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/kernel/mpparse.c | 25 +++++++++----------------
1 file changed, 9 insertions(+), 16 deletions(-)
Index: tip/arch/x86/kernel/mpparse.c
===================================================================
--- tip.orig/arch/x86/kernel/mpparse.c
+++ tip/arch/x86/kernel/mpparse.c
@@ -870,24 +870,17 @@ static
inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
#endif /* CONFIG_X86_IO_APIC */
-static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length,
- int count)
+static int
+check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
{
- if (!mpc_new_phys) {
- pr_info("No spare slots, try to append...take your risk, "
- "new mpc_length %x\n", count);
- } else {
- if (count <= mpc_new_length)
- pr_info("No spare slots, try to append..., "
- "new mpc_length %x\n", count);
- else {
- pr_err("mpc_new_length %lx is too small\n",
- mpc_new_length);
- return -1;
- }
+ int ret = 0;
+
+ if (!mpc_new_phys || count <= mpc_new_length) {
+ WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
+ return -1;
}
- return 0;
+ return ret;
}
static int __init replace_intsrc_all(struct mpc_table *mpc,
@@ -946,7 +939,7 @@ static int __init replace_intsrc_all(st
} else {
struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
count += sizeof(struct mpc_intsrc);
- if (!check_slot(mpc_new_phys, mpc_new_length, count))
+ if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
goto out;
assign_to_mpc_intsrc(&mp_irqs[i], m);
mpc->length = count;
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector
2009-05-06 17:08 ` Yinghai Lu
(?)
(?)
@ 2009-05-11 8:28 ` Ingo Molnar
2009-05-11 19:40 ` Yinghai Lu
-1 siblings, 1 reply; 37+ messages in thread
From: Ingo Molnar @ 2009-05-11 8:28 UTC (permalink / raw)
To: Yinghai Lu
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
* Yinghai Lu <yinghai@kernel.org> wrote:
> +int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
> + int *ioapic, int *ioapic_pin,
> + int *trigger, int *polarity)
> if (io_apic_assign_pci_irqs) {
> int irq;
> + int ioapic = -1, ioapic_pin = -1;
> + int triggering, polarity;
please put this into a helper function/inline.
>
> - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1);
> + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
> + PCI_SLOT(dev->devfn),
> + pin - 1,
> + &ioapic, &ioapic_pin,
> + &triggering, &polarity);
> /*
> * Busses behind bridges are typically not listed in the MP-table.
> * In this case we have to look up the IRQ based on the parent bus,
> @@ -1235,7 +1248,10 @@ static int pirq_enable_irq(struct pci_de
>
> pin = pci_swizzle_interrupt_pin(dev, pin);
> irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
> - PCI_SLOT(bridge->devfn), pin - 1);
> + PCI_SLOT(bridge->devfn),
> + pin - 1,
> + &ioapic, &ioapic_pin,
> + &triggering, &polarity);
> if (irq >= 0)
> dev_warn(&dev->dev, "using bridge %s "
> "INT %c to get IRQ %d\n",
That function has way too many parameters. Please introduce a helper
structure (struct io_apic_irq_attr) where the parameters can be
passed along in a clean and short fashion. We update them by
reference anyway.
I've applied the patch, but we need these cleanups too, the code has
become too ugly.
Ingo
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector
2009-05-06 17:08 ` Yinghai Lu
` (2 preceding siblings ...)
(?)
@ 2009-05-11 9:05 ` Ingo Molnar
-1 siblings, 0 replies; 37+ messages in thread
From: Ingo Molnar @ 2009-05-11 9:05 UTC (permalink / raw)
To: Yinghai Lu
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
hm, you broke the build:
drivers/pci/hotplug/ibmphp_core.c: In function ‘ibmphp_init_devno’:
drivers/pci/hotplug/ibmphp_core.c:165: error: expected identifier before ‘&’ token
drivers/pci/hotplug/ibmphp_core.c:166: error: too few arguments to function ‘IO_APIC_get_PCI_irq_vector’
Ingo
^ permalink raw reply [flat|nested] 37+ messages in thread
* [tip:irq/numa] x86/acpi: remove irq-compression trick on 32-bit
2009-05-06 17:05 ` Yinghai Lu
` (6 preceding siblings ...)
(?)
@ 2009-05-11 9:52 ` tip-bot for Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: tip-bot for Yinghai Lu @ 2009-05-11 9:52 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, yinghai, lenb, akpm, jbarnes, tglx, mingo
Commit-ID: b9e0353fc85dab4ef5ebcef2bd09ebc4ce6d5a7b
Gitweb: http://git.kernel.org/tip/b9e0353fc85dab4ef5ebcef2bd09ebc4ce6d5a7b
Author: Yinghai Lu <yinghai@kernel.org>
AuthorDate: Wed, 6 May 2009 10:05:32 -0700
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Mon, 11 May 2009 10:35:06 +0200
x86/acpi: remove irq-compression trick on 32-bit
We already have a per cpu vector on 32-bit via recent changes, and
don't need this trick any more (which trick obfuscates the real GSI
mappings and which only triggers on larger systems to begin with):
On 3 ioapic system (24 per ioapic) before patch I got:
ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71
IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 64 Mode:1 Active:1)
pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 64
ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67
IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 65 Mode:1 Active:1)
pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66
IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1)
pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65
IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 67 Mode:1 Active:1)
pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64
IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 68 Mode:1 Active:1)
pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67
pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68
pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65
after the patch we get:
ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71
IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 71 Mode:1 Active:1)
pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 71
ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67
IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 67 Mode:1 Active:1)
pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66
IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1)
pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65
IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 65 Mode:1 Active:1)
pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64
IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 64 Mode:1 Active:1)
pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66
pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65
pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64
pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67
As it can be seen that GSIs now get mapped lineary.
[ Impact: simplify irq number mapping on bigger 32-bit systems ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C35C.7060207@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/kernel/acpi/boot.c | 65 ++++--------------------------------------
1 files changed, 7 insertions(+), 58 deletions(-)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6ee96b5..fb5e882 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1162,22 +1162,9 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
{
int ioapic;
int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM 4096
-#define IRQ_COMPRESSION_START 64
-
- static int pci_irq = IRQ_COMPRESSION_START;
- /*
- * Mapping between Global System Interrupts, which
- * represent all possible interrupts, and IRQs
- * assigned to actual devices.
- */
- static int gsi_to_irq[MAX_GSI_NUM];
-#else
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
-#endif
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -1196,66 +1183,28 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
gsi = ioapic_renumber_irq(ioapic, gsi);
#endif
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
"%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
ioapic_pin);
return gsi;
}
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
pr_debug("Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
- return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
return gsi;
-#endif
}
-
set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
- /*
- * For GSI >= 64, use IRQ compression
- */
- if ((gsi >= IRQ_COMPRESSION_START)
- && (triggering == ACPI_LEVEL_SENSITIVE)) {
- /*
- * For PCI devices assign IRQs in order, avoiding gaps
- * due to unused I/O APIC pins.
- */
- int irq = gsi;
- if (gsi < MAX_GSI_NUM) {
- /*
- * Retain the VIA chipset work-around (gsi > 15), but
- * avoid a problem where the 8254 timer (IRQ0) is setup
- * via an override (so it's not on pin 0 of the ioapic),
- * and at the same time, the pin 0 interrupt is a PCI
- * type. The gsi > 15 test could cause these two pins
- * to be shared as IRQ0, and they are not shareable.
- * So test for this condition, and if necessary, avoid
- * the pin collision.
- */
- gsi = pci_irq++;
- /*
- * Don't assign IRQ used by ACPI SCI
- */
- if (gsi == acpi_gbl_FADT.sci_interrupt)
- gsi = pci_irq++;
- gsi_to_irq[irq] = gsi;
- } else {
- printk(KERN_ERR "GSI %u is too high\n", gsi);
- return gsi;
- }
- }
-#endif
io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+
return gsi;
}
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [tip:irq/numa] x86: fix alloc_mptable()
2009-05-06 17:07 ` Yinghai Lu
(?)
(?)
@ 2009-05-11 9:52 ` tip-bot for Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: tip-bot for Yinghai Lu @ 2009-05-11 9:52 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, yinghai, lenb, akpm, jbarnes, tglx, mingo
Commit-ID: ee214558c2e959781a406e76c5b34364da638e1d
Gitweb: http://git.kernel.org/tip/ee214558c2e959781a406e76c5b34364da638e1d
Author: Yinghai Lu <yinghai@kernel.org>
AuthorDate: Wed, 6 May 2009 10:07:07 -0700
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Mon, 11 May 2009 10:35:07 +0200
x86: fix alloc_mptable()
Fix the conditions when we stop updating the mptable due to
running out of slots.
[ Impact: fix memory corruption / non-working update_mptable boot parameter ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C3BB.1000609@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/kernel/mpparse.c | 25 +++++++++----------------
1 files changed, 9 insertions(+), 16 deletions(-)
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 70fd7e4..cd2a41a 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -870,24 +870,17 @@ static
inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
#endif /* CONFIG_X86_IO_APIC */
-static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length,
- int count)
+static int
+check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
{
- if (!mpc_new_phys) {
- pr_info("No spare slots, try to append...take your risk, "
- "new mpc_length %x\n", count);
- } else {
- if (count <= mpc_new_length)
- pr_info("No spare slots, try to append..., "
- "new mpc_length %x\n", count);
- else {
- pr_err("mpc_new_length %lx is too small\n",
- mpc_new_length);
- return -1;
- }
+ int ret = 0;
+
+ if (!mpc_new_phys || count <= mpc_new_length) {
+ WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
+ return -1;
}
- return 0;
+ return ret;
}
static int __init replace_intsrc_all(struct mpc_table *mpc,
@@ -946,7 +939,7 @@ static int __init replace_intsrc_all(struct mpc_table *mpc,
} else {
struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
count += sizeof(struct mpc_intsrc);
- if (!check_slot(mpc_new_phys, mpc_new_length, count))
+ if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
goto out;
assign_to_mpc_intsrc(&mp_irqs[i], m);
mpc->length = count;
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [tip:irq/numa] x86/acpi: call mp_config_acpi_gsi() in mp_register_gsi()
2009-05-06 17:06 ` Yinghai Lu
(?)
@ 2009-05-11 9:52 ` tip-bot for Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: tip-bot for Yinghai Lu @ 2009-05-11 9:52 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, yinghai, lenb, akpm, jbarnes, tglx, mingo
Commit-ID: a31f82057ce6f7ced578d64c07a72ccbdc7336e4
Gitweb: http://git.kernel.org/tip/a31f82057ce6f7ced578d64c07a72ccbdc7336e4
Author: Yinghai Lu <yinghai@kernel.org>
AuthorDate: Wed, 6 May 2009 10:06:15 -0700
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Mon, 11 May 2009 10:35:08 +0200
x86/acpi: call mp_config_acpi_gsi() in mp_register_gsi()
The patch to call mp_config_acpi_gsi() from the ACPI IRQ registration
code never got mainline because there were open discussions about it.
This call is needed to properly update the kernel's copy of the mptable,
when the update_mptable boot parameter is needed.
Now that the dust has settled with the APIC unification, and since there
were no objections when the patch was re-submitted, try this again.
[ Impact: fix the update_mptable boot parameter ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C387.7090103@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/include/asm/mpspec.h | 9 -----
arch/x86/kernel/acpi/boot.c | 66 +++++++++++++++++++++++++----------------
2 files changed, 40 insertions(+), 35 deletions(-)
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 3ea1f53..c34961a 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -77,17 +77,8 @@ extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
int active_high_low);
extern int acpi_probe_gsi(void);
#ifdef CONFIG_X86_IO_APIC
-extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity);
extern int mp_find_ioapic(int gsi);
extern int mp_find_ioapic_pin(int ioapic, int gsi);
-#else
-static inline int
-mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
- return 0;
-}
#endif
#else /* !CONFIG_ACPI: */
static inline int acpi_probe_gsi(void)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index fb5e882..8019ecf 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -33,6 +33,7 @@
#include <linux/irq.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
+#include <linux/pci.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
@@ -1158,6 +1159,44 @@ void __init mp_config_acpi_legacy_irqs(void)
}
}
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering,
+ int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+ struct mpc_intsrc mp_irq;
+ struct pci_dev *pdev;
+ unsigned char number;
+ unsigned int devfn;
+ int ioapic;
+ u8 pin;
+
+ if (!acpi_ioapic)
+ return 0;
+ if (!dev)
+ return 0;
+ if (dev->bus != &pci_bus_type)
+ return 0;
+
+ pdev = to_pci_dev(dev);
+ number = pdev->bus->number;
+ devfn = pdev->devfn;
+ pin = pdev->pin;
+ /* print the entry should happen on mptable identically */
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ mp_irq.srcbus = number;
+ mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
+ mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+ save_mp_irq(&mp_irq);
+#endif
+ return 0;
+}
+
int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
{
int ioapic;
@@ -1189,6 +1228,7 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
ioapic_pin);
return gsi;
}
+ mp_config_acpi_gsi(dev, gsi, triggering, polarity);
/*
* Avoid pin reprogramming. PRTs typically include entries
@@ -1208,32 +1248,6 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
return gsi;
}
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
- struct mpc_intsrc mp_irq;
- int ioapic;
-
- if (!acpi_ioapic)
- return 0;
-
- /* print the entry should happen on mptable identically */
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
- (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
- mp_irq.srcbus = number;
- mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
- ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
- mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
- save_mp_irq(&mp_irq);
-#endif
- return 0;
-}
-
/*
* Parse IOAPIC related entries in MADT
* returns 0 on success, < 0 on error
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [tip:irq/numa] x86/acpi: move pin_programmed bit map to io_apic.c
2009-05-06 17:07 ` Yinghai Lu
(?)
@ 2009-05-11 9:52 ` tip-bot for Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: tip-bot for Yinghai Lu @ 2009-05-11 9:52 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, yinghai, lenb, akpm, jbarnes, tglx, mingo
Commit-ID: bdfe8ac153546537ed24de69610ea781a734f785
Gitweb: http://git.kernel.org/tip/bdfe8ac153546537ed24de69610ea781a734f785
Author: Yinghai Lu <yinghai@kernel.org>
AuthorDate: Wed, 6 May 2009 10:07:41 -0700
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Mon, 11 May 2009 10:35:08 +0200
x86/acpi: move pin_programmed bit map to io_apic.c
Prepare to call setup_io_apic_routing() in pcibios_irq_enable()
also remove not needed member apic_id.
[ Impact: clean up, prepare for future change ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C3DD.3050104@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/kernel/acpi/boot.c | 18 ++----------------
arch/x86/kernel/apic/io_apic.c | 25 ++++++++++++++++++++++++-
2 files changed, 26 insertions(+), 17 deletions(-)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 8019ecf..dcfbc3a 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -904,10 +904,8 @@ extern int es7000_plat;
#endif
static struct {
- int apic_id;
int gsi_base;
int gsi_end;
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
} mp_ioapic_routing[MAX_IO_APICS];
int mp_find_ioapic(int gsi)
@@ -996,7 +994,6 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
* Build basic GSI lookup table to facilitate gsi->io_apic lookups
* and to prevent reprogramming of IOAPIC pins (PCI GSIs).
*/
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
mp_ioapic_routing[idx].gsi_base = gsi_base;
mp_ioapic_routing[idx].gsi_end = gsi_base +
io_apic_get_redir_entries(idx);
@@ -1189,7 +1186,7 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering,
mp_irq.srcbus = number;
mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
+ mp_irq.dstapic = mp_ioapics[ioapic].apicid;
mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
save_mp_irq(&mp_irq);
@@ -1224,23 +1221,12 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ "%d-%d\n", mp_ioapics[ioapic].apicid,
ioapic_pin);
return gsi;
}
mp_config_acpi_gsi(dev, gsi, triggering, polarity);
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- return gsi;
- }
- set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 21c30e1..e279ae3 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3922,7 +3922,7 @@ int __init io_apic_get_version(int ioapic)
}
#endif
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
int triggering, int polarity)
{
struct irq_desc *desc;
@@ -3959,6 +3959,29 @@ int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
return 0;
}
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[ioapic].apicid, pin);
+ return 0;
+ }
+ set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+ return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
+ triggering, polarity);
+}
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
{
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [tip:irq/numa] x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
2009-05-06 17:08 ` Yinghai Lu
` (3 preceding siblings ...)
(?)
@ 2009-05-11 9:52 ` tip-bot for Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: tip-bot for Yinghai Lu @ 2009-05-11 9:52 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, yinghai, lenb, jbarnes, akpm, tglx, mingo
Commit-ID: e20c06fd6950265a899edd96a02dc2e6ae2d1ce5
Gitweb: http://git.kernel.org/tip/e20c06fd6950265a899edd96a02dc2e6ae2d1ce5
Author: Yinghai Lu <yinghai@kernel.org>
AuthorDate: Wed, 6 May 2009 10:08:22 -0700
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Mon, 11 May 2009 10:35:09 +0200
x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing().
[ Impact: extend function call API to prepare for new functionality ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A01C406.2040303@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/include/asm/hw_irq.h | 4 +-
arch/x86/kernel/apic/io_apic.c | 107 ++++++++++++++++++++----------------
arch/x86/pci/irq.c | 24 +++++++--
drivers/pci/hotplug/ibmphp_core.c | 56 ++++++++++---------
4 files changed, 112 insertions(+), 79 deletions(-)
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index b762ea4..26a40ab 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -63,7 +63,9 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
+ int *ioapic, int *ioapic_pin,
+ int *trigger, int *polarity);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e279ae3..caf9dbd 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -873,54 +873,6 @@ static int __init find_isa_irq_apic(int irq, int type)
return -1;
}
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
- int apic, i, best_guess = -1;
-
- apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
- bus, slot, pin);
- if (test_bit(bus, mp_bus_not_pci)) {
- apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
- return -1;
- }
- for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].srcbus;
-
- for (apic = 0; apic < nr_ioapics; apic++)
- if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
- mp_irqs[i].dstapic == MP_APIC_ALL)
- break;
-
- if (!test_bit(lbus, mp_bus_not_pci) &&
- !mp_irqs[i].irqtype &&
- (bus == lbus) &&
- (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
- int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
-
- if (!(apic || IO_APIC_IRQ(irq)))
- continue;
-
- if (pin == (mp_irqs[i].srcbusirq & 3))
- return irq;
- /*
- * Use the first all-but-pin matching entry as a
- * best-guess fuzzy result for broken mptables.
- */
- if (best_guess < 0)
- best_guess = irq;
- }
- }
- return best_guess;
-}
-
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
/*
* EISA Edge/Level control register, ELCR
@@ -1139,6 +1091,65 @@ static int pin_2_irq(int idx, int apic, int pin)
return irq;
}
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
+ int *ioapic, int *ioapic_pin,
+ int *trigger, int *polarity)
+{
+ int apic, i, best_guess = -1;
+
+ apic_printk(APIC_DEBUG,
+ "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+ bus, slot, pin);
+ if (test_bit(bus, mp_bus_not_pci)) {
+ apic_printk(APIC_VERBOSE,
+ "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+ return -1;
+ }
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].srcbus;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+ mp_irqs[i].dstapic == MP_APIC_ALL)
+ break;
+
+ if (!test_bit(lbus, mp_bus_not_pci) &&
+ !mp_irqs[i].irqtype &&
+ (bus == lbus) &&
+ (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
+
+ if (!(apic || IO_APIC_IRQ(irq)))
+ continue;
+
+ if (pin == (mp_irqs[i].srcbusirq & 3)) {
+ *ioapic = apic;
+ *ioapic_pin = mp_irqs[i].dstirq;
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ return irq;
+ }
+ /*
+ * Use the first all-but-pin matching entry as a
+ * best-guess fuzzy result for broken mptables.
+ */
+ if (best_guess < 0) {
+ *ioapic = apic;
+ *ioapic_pin = mp_irqs[i].dstirq;
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ best_guess = irq;
+ }
+ }
+ }
+ return best_guess;
+}
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
void lock_vector_lock(void)
{
/* Used to the online set of cpus does not change
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index fecbce6..a2f6bde 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -1051,12 +1051,16 @@ static void __init pcibios_fixup_irqs(void)
*/
if (io_apic_assign_pci_irqs) {
int irq;
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
/*
* interrupt pins are numbered starting from 1
*/
irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin - 1);
+ PCI_SLOT(dev->devfn), pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
/*
* Busses behind bridges are typically not listed in the
* MP-table. In this case we have to look up the IRQ
@@ -1072,7 +1076,10 @@ static void __init pcibios_fixup_irqs(void)
pin = pci_swizzle_interrupt_pin(dev, pin);
bus = bridge->bus->number;
irq = IO_APIC_get_PCI_irq_vector(bus,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
if (irq >= 0)
dev_warn(&dev->dev,
"using bridge %s INT %c to "
@@ -1221,8 +1228,14 @@ static int pirq_enable_irq(struct pci_dev *dev)
if (io_apic_assign_pci_irqs) {
int irq;
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1);
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1235,7 +1248,10 @@ static int pirq_enable_irq(struct pci_dev *dev)
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index dd18f85..ef53b05 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -153,45 +153,49 @@ int ibmphp_init_devno(struct slot **cur_slot)
return -1;
}
for (loop = 0; loop < len; loop++) {
- if ((*cur_slot)->number == rtable->slots[loop].slot) {
- if ((*cur_slot)->bus == rtable->slots[loop].bus) {
+ if ((*cur_slot)->number == rtable->slots[loop].slot &&
+ (*cur_slot)->bus == rtable->slots[loop].bus) {
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
+
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
- (int) (*cur_slot)->device, i);
-
- debug("(*cur_slot)->irq[0] = %x\n",
- (*cur_slot)->irq[0]);
- debug("(*cur_slot)->irq[1] = %x\n",
- (*cur_slot)->irq[1]);
- debug("(*cur_slot)->irq[2] = %x\n",
- (*cur_slot)->irq[2]);
- debug("(*cur_slot)->irq[3] = %x\n",
- (*cur_slot)->irq[3]);
-
- debug("rtable->exlusive_irqs = %x\n",
+ (int) (*cur_slot)->device, i.
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
+
+ debug("(*cur_slot)->irq[0] = %x\n",
+ (*cur_slot)->irq[0]);
+ debug("(*cur_slot)->irq[1] = %x\n",
+ (*cur_slot)->irq[1]);
+ debug("(*cur_slot)->irq[2] = %x\n",
+ (*cur_slot)->irq[2]);
+ debug("(*cur_slot)->irq[3] = %x\n",
+ (*cur_slot)->irq[3]);
+
+ debug("rtable->exlusive_irqs = %x\n",
rtable->exclusive_irqs);
- debug("rtable->slots[loop].irq[0].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[0].bitmap = %x\n",
rtable->slots[loop].irq[0].bitmap);
- debug("rtable->slots[loop].irq[1].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[1].bitmap = %x\n",
rtable->slots[loop].irq[1].bitmap);
- debug("rtable->slots[loop].irq[2].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[2].bitmap = %x\n",
rtable->slots[loop].irq[2].bitmap);
- debug("rtable->slots[loop].irq[3].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[3].bitmap = %x\n",
rtable->slots[loop].irq[3].bitmap);
- debug("rtable->slots[loop].irq[0].link = %x\n",
+ debug("rtable->slots[loop].irq[0].link = %x\n",
rtable->slots[loop].irq[0].link);
- debug("rtable->slots[loop].irq[1].link = %x\n",
+ debug("rtable->slots[loop].irq[1].link = %x\n",
rtable->slots[loop].irq[1].link);
- debug("rtable->slots[loop].irq[2].link = %x\n",
+ debug("rtable->slots[loop].irq[2].link = %x\n",
rtable->slots[loop].irq[2].link);
- debug("rtable->slots[loop].irq[3].link = %x\n",
+ debug("rtable->slots[loop].irq[3].link = %x\n",
rtable->slots[loop].irq[3].link);
- debug("end of init_devno\n");
- kfree(rtable);
- return 0;
- }
+ debug("end of init_devno\n");
+ kfree(rtable);
+ return 0;
}
}
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [tip:irq/numa] x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
2009-05-06 17:08 ` Yinghai Lu
(?)
@ 2009-05-11 9:53 ` tip-bot for Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: tip-bot for Yinghai Lu @ 2009-05-11 9:53 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, yinghai, lenb, akpm, jbarnes, tglx, mingo
Commit-ID: 5ef2183768bb7d64b85eccbfa1537a61cbefa97c
Gitweb: http://git.kernel.org/tip/5ef2183768bb7d64b85eccbfa1537a61cbefa97c
Author: Yinghai Lu <yinghai@kernel.org>
AuthorDate: Wed, 6 May 2009 10:08:50 -0700
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Mon, 11 May 2009 10:35:09 +0200
x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
So we could set io apic routing when ACPI is not enabled.
[ Impact: prepare for new functionality ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C422.5070400@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/include/asm/io_apic.h | 4 +-
arch/x86/kernel/apic/io_apic.c | 122 ++++++++++++++++++++--------------------
2 files changed, 63 insertions(+), 63 deletions(-)
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 27bd2fd..6fd99f9 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -154,10 +154,10 @@ extern int timer_through_8259;
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
- int irq, int edge_level, int active_high_low);
#endif /* CONFIG_ACPI */
+extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
+ int irq, int edge_level, int active_high_low);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index caf9dbd..3a68dae 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3839,6 +3839,67 @@ int __init arch_probe_nr_irqs(void)
}
#endif
+static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+ struct irq_desc *desc;
+ struct irq_cfg *cfg;
+ int node;
+
+ if (!IO_APIC_IRQ(irq)) {
+ apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+ ioapic);
+ return -EINVAL;
+ }
+
+ if (dev)
+ node = dev_to_node(dev);
+ else
+ node = cpu_to_node(boot_cpu_id);
+
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc %d\n", irq);
+ return 0;
+ }
+
+ /*
+ * IRQs < 16 are already in the irq_2_pin[] map
+ */
+ if (irq >= NR_IRQS_LEGACY) {
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, ioapic, pin);
+ }
+
+ setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
+
+ return 0;
+}
+
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[ioapic].apicid, pin);
+ return 0;
+ }
+ set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+ return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
+ triggering, polarity);
+}
+
/* --------------------------------------------------------------------------
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
@@ -3933,67 +3994,6 @@ int __init io_apic_get_version(int ioapic)
}
#endif
-static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
-{
- struct irq_desc *desc;
- struct irq_cfg *cfg;
- int node;
-
- if (!IO_APIC_IRQ(irq)) {
- apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
- ioapic);
- return -EINVAL;
- }
-
- if (dev)
- node = dev_to_node(dev);
- else
- node = cpu_to_node(boot_cpu_id);
-
- desc = irq_to_desc_alloc_node(irq, node);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc %d\n", irq);
- return 0;
- }
-
- /*
- * IRQs < 16 are already in the irq_2_pin[] map
- */
- if (irq >= NR_IRQS_LEGACY) {
- cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, ioapic, pin);
- }
-
- setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
-
- return 0;
-}
-
-static struct {
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
-{
-
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapics[ioapic].apicid, pin);
- return 0;
- }
- set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
-
- return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
- triggering, polarity);
-}
-
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
{
int i;
^ permalink raw reply related [flat|nested] 37+ messages in thread
* [tip:irq/numa] x86/pci: update pirq_enable_irq() to setup io apic routing
2009-05-06 17:10 ` Yinghai Lu
(?)
(?)
@ 2009-05-11 9:53 ` tip-bot for Yinghai Lu
-1 siblings, 0 replies; 37+ messages in thread
From: tip-bot for Yinghai Lu @ 2009-05-11 9:53 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, yinghai, lenb, jbarnes, akpm, tglx, mingo
Commit-ID: b9c61b70075c87a8612624736faf4a2de5b1ed30
Gitweb: http://git.kernel.org/tip/b9c61b70075c87a8612624736faf4a2de5b1ed30
Author: Yinghai Lu <yinghai@kernel.org>
AuthorDate: Wed, 6 May 2009 10:10:06 -0700
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Mon, 11 May 2009 10:35:10 +0200
x86/pci: update pirq_enable_irq() to setup io apic routing
So we can set io apic routing only when enabling the device irq.
This is advantageous for IRQ descriptor allocation affinity: if we set up
the IO-APIC entry later, we have a chance to allocate the IRQ descriptor
later and know which device it is on and can set affinity accordingly.
[ Impact: standardize/enhance irq-enabling sequence for mptable irqs ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A01C46E.8000501@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/kernel/apic/io_apic.c | 150 ++++++++++++++++++++--------------------
arch/x86/pci/irq.c | 84 ++++++++--------------
2 files changed, 104 insertions(+), 130 deletions(-)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 3a68dae..5d5f412 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1480,9 +1480,13 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq
ioapic_write_entry(apic_id, pin, entry);
}
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
static void __init setup_IO_APIC_irqs(void)
{
- int apic_id, pin, idx, irq;
+ int apic_id = 0, pin, idx, irq;
int notcon = 0;
struct irq_desc *desc;
struct irq_cfg *cfg;
@@ -1490,48 +1494,53 @@ static void __init setup_IO_APIC_irqs(void)
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
- for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
- for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
-
- idx = find_irq_entry(apic_id, pin, mp_INT);
- if (idx == -1) {
- if (!notcon) {
- notcon = 1;
- apic_printk(APIC_VERBOSE,
- KERN_DEBUG " %d-%d",
- mp_ioapics[apic_id].apicid, pin);
- } else
- apic_printk(APIC_VERBOSE, " %d-%d",
- mp_ioapics[apic_id].apicid, pin);
- continue;
- }
- if (notcon) {
- apic_printk(APIC_VERBOSE,
- " (apicid-pin) not connected\n");
- notcon = 0;
- }
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic) {
+ apic_id = mp_find_ioapic(0);
+ if (apic_id < 0)
+ apic_id = 0;
+ }
+#endif
- irq = pin_2_irq(idx, apic_id, pin);
+ for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
+ idx = find_irq_entry(apic_id, pin, mp_INT);
+ if (idx == -1) {
+ if (!notcon) {
+ notcon = 1;
+ apic_printk(APIC_VERBOSE,
+ KERN_DEBUG " %d-%d",
+ mp_ioapics[apic_id].apicid, pin);
+ } else
+ apic_printk(APIC_VERBOSE, " %d-%d",
+ mp_ioapics[apic_id].apicid, pin);
+ continue;
+ }
+ if (notcon) {
+ apic_printk(APIC_VERBOSE,
+ " (apicid-pin) not connected\n");
+ notcon = 0;
+ }
- /*
- * Skip the timer IRQ if there's a quirk handler
- * installed and if it returns 1:
- */
- if (apic->multi_timer_check &&
- apic->multi_timer_check(apic_id, irq))
- continue;
+ irq = pin_2_irq(idx, apic_id, pin);
- desc = irq_to_desc_alloc_node(irq, node);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc for %d\n", irq);
- continue;
- }
- cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, apic_id, pin);
+ /*
+ * Skip the timer IRQ if there's a quirk handler
+ * installed and if it returns 1:
+ */
+ if (apic->multi_timer_check &&
+ apic->multi_timer_check(apic_id, irq))
+ continue;
- setup_IO_APIC_irq(apic_id, pin, irq, desc,
- irq_trigger(idx), irq_polarity(idx));
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+ continue;
}
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, apic_id, pin);
+ set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed);
+ setup_IO_APIC_irq(apic_id, pin, irq, desc,
+ irq_trigger(idx), irq_polarity(idx));
}
if (notcon)
@@ -3876,10 +3885,6 @@ static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, in
return 0;
}
-static struct {
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
-} mp_ioapic_routing[MAX_IO_APICS];
-
int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
int triggering, int polarity)
{
@@ -4023,51 +4028,44 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
#ifdef CONFIG_SMP
void __init setup_ioapic_dest(void)
{
- int pin, ioapic, irq, irq_entry;
+ int pin, ioapic = 0, irq, irq_entry;
struct irq_desc *desc;
- struct irq_cfg *cfg;
const struct cpumask *mask;
if (skip_ioapic_setup == 1)
return;
- for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
- for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
- irq_entry = find_irq_entry(ioapic, pin, mp_INT);
- if (irq_entry == -1)
- continue;
- irq = pin_2_irq(irq_entry, ioapic, pin);
-
- /* setup_IO_APIC_irqs could fail to get vector for some device
- * when you have too many devices, because at that time only boot
- * cpu is online.
- */
- desc = irq_to_desc(irq);
- cfg = desc->chip_data;
- if (!cfg->vector) {
- setup_IO_APIC_irq(ioapic, pin, irq, desc,
- irq_trigger(irq_entry),
- irq_polarity(irq_entry));
- continue;
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic) {
+ ioapic = mp_find_ioapic(0);
+ if (ioapic < 0)
+ ioapic = 0;
+ }
+#endif
- }
+ for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+ irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+ if (irq_entry == -1)
+ continue;
+ irq = pin_2_irq(irq_entry, ioapic, pin);
- /*
- * Honour affinities which have been set in early boot
- */
- if (desc->status &
- (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
- mask = desc->affinity;
- else
- mask = apic->target_cpus();
+ desc = irq_to_desc(irq);
- if (intr_remapping_enabled)
- set_ir_ioapic_affinity_irq_desc(desc, mask);
- else
- set_ioapic_affinity_irq_desc(desc, mask);
- }
+ /*
+ * Honour affinities which have been set in early boot
+ */
+ if (desc->status &
+ (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+ mask = desc->affinity;
+ else
+ mask = apic->target_cpus();
+ if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq_desc(desc, mask);
+ else
+ set_ioapic_affinity_irq_desc(desc, mask);
}
+
}
#endif
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index a2f6bde..2f3e192 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -889,6 +889,9 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
return 0;
}
+ if (io_apic_assign_pci_irqs)
+ return 0;
+
/* Find IRQ routing entry */
if (!pirq_table)
@@ -1039,63 +1042,15 @@ static void __init pcibios_fixup_irqs(void)
pirq_penalty[dev->irq]++;
}
+ if (io_apic_assign_pci_irqs)
+ return;
+
dev = NULL;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (!pin)
continue;
-#ifdef CONFIG_X86_IO_APIC
- /*
- * Recalculate IRQ numbers if we use the I/O APIC.
- */
- if (io_apic_assign_pci_irqs) {
- int irq;
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
-
- /*
- * interrupt pins are numbered starting from 1
- */
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
- /*
- * Busses behind bridges are typically not listed in the
- * MP-table. In this case we have to look up the IRQ
- * based on the parent bus, parent slot, and pin number.
- * The SMP code detects such bridged busses itself so we
- * should get into this branch reliably.
- */
- if (irq < 0 && dev->bus->parent) {
- /* go back to the bridge */
- struct pci_dev *bridge = dev->bus->self;
- int bus;
-
- pin = pci_swizzle_interrupt_pin(dev, pin);
- bus = bridge->bus->number;
- irq = IO_APIC_get_PCI_irq_vector(bus,
- PCI_SLOT(bridge->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
- if (irq >= 0)
- dev_warn(&dev->dev,
- "using bridge %s INT %c to "
- "get IRQ %d\n",
- pci_name(bridge),
- 'A' + pin - 1, irq);
- }
- if (irq >= 0) {
- dev_info(&dev->dev,
- "PCI->APIC IRQ transform: INT %c "
- "-> IRQ %d\n",
- 'A' + pin - 1, irq);
- dev->irq = irq;
- }
- }
-#endif
/*
* Still no IRQ? Try to lookup one...
*/
@@ -1190,6 +1145,19 @@ int __init pcibios_irq_init(void)
pcibios_enable_irq = pirq_enable_irq;
pcibios_fixup_irqs();
+
+ if (io_apic_assign_pci_irqs && pci_routeirq) {
+ struct pci_dev *dev = NULL;
+ /*
+ * PCI IRQ routing is set up by pci_enable_device(), but we
+ * also do it here in case there are still broken drivers that
+ * don't use pci_enable_device().
+ */
+ printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
+ for_each_pci_dev(dev)
+ pirq_enable_irq(dev);
+ }
+
return 0;
}
@@ -1220,13 +1188,17 @@ void pcibios_penalize_isa_irq(int irq, int active)
static int pirq_enable_irq(struct pci_dev *dev)
{
u8 pin;
- struct pci_dev *temp_dev;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
+ if (pin && !pcibios_lookup_irq(dev, 1)) {
char *msg = "";
+ if (!io_apic_assign_pci_irqs && dev->irq)
+ return 0;
+
if (io_apic_assign_pci_irqs) {
+#ifdef CONFIG_X86_IO_APIC
+ struct pci_dev *temp_dev;
int irq;
int ioapic = -1, ioapic_pin = -1;
int triggering, polarity;
@@ -1261,12 +1233,16 @@ static int pirq_enable_irq(struct pci_dev *dev)
}
dev = temp_dev;
if (irq >= 0) {
+ io_apic_set_pci_routing(&dev->dev, ioapic,
+ ioapic_pin, irq,
+ triggering, polarity);
+ dev->irq = irq;
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
- dev->irq = irq;
return 0;
} else
msg = "; probably buggy MP table";
+#endif
} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
msg = "";
else
^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector
2009-05-11 8:28 ` Ingo Molnar
@ 2009-05-11 19:40 ` Yinghai Lu
2009-05-11 21:37 ` Ingo Molnar
0 siblings, 1 reply; 37+ messages in thread
From: Yinghai Lu @ 2009-05-11 19:40 UTC (permalink / raw)
To: Ingo Molnar
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
Ingo Molnar wrote:
>
> That function has way too many parameters. Please introduce a helper
> structure (struct io_apic_irq_attr) where the parameters can be
> passed along in a clean and short fashion. We update them by
> reference anyway.
>
> I've applied the patch, but we need these cleanups too, the code has
> become too ugly.
>
please check
[PATCH] x86: introduce io_apic_irq_attr
according to Ingo, some io_apic related function get too more parameter
So reduce related funcs to get less param by passing io_apic_irq pointer
[ Impact: cleanup ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/hw_irq.h | 11 ++++++++--
arch/x86/include/asm/io_apic.h | 5 ++--
arch/x86/kernel/acpi/boot.c | 9 +++++---
arch/x86/kernel/apic/io_apic.c | 41 ++++++++++++++++++++++----------------
arch/x86/pci/irq.c | 15 +++----------
drivers/pci/hotplug/ibmphp_core.c | 7 +-----
6 files changed, 48 insertions(+), 40 deletions(-)
Index: linux-2.6/arch/x86/include/asm/hw_irq.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/hw_irq.h
+++ linux-2.6/arch/x86/include/asm/hw_irq.h
@@ -63,9 +63,16 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
+
+struct io_apic_irq_attr {
+ int ioapic;
+ int ioapic_pin;
+ int trigger;
+ int polarity;
+};
+
extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
- int *ioapic, int *ioapic_pin,
- int *trigger, int *polarity);
+ struct io_apic_irq_attr *io_apic_irq);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
Index: linux-2.6/arch/x86/include/asm/io_apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/io_apic.h
+++ linux-2.6/arch/x86/include/asm/io_apic.h
@@ -156,8 +156,9 @@ extern int io_apic_get_version(int ioapi
extern int io_apic_get_redir_entries(int ioapic);
#endif /* CONFIG_ACPI */
-extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
- int irq, int edge_level, int active_high_low);
+struct io_apic_irq_attr;
+extern int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *io_apic_irq);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -1198,6 +1198,7 @@ int mp_register_gsi(struct device *dev,
{
int ioapic;
int ioapic_pin;
+ struct io_apic_irq_attr io_apic_irq;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
@@ -1227,9 +1228,11 @@ int mp_register_gsi(struct device *dev,
}
mp_config_acpi_gsi(dev, gsi, triggering, polarity);
- io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_irq.ioapic = ioapic;
+ io_apic_irq.ioapic_pin = ioapic_pin;
+ io_apic_irq.trigger = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
+ io_apic_irq.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_set_pci_routing(dev, gsi, &io_apic_irq);
return gsi;
}
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -1096,8 +1096,7 @@ static int pin_2_irq(int idx, int apic,
* Not an __init, possibly needed by modules
*/
int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
- int *ioapic, int *ioapic_pin,
- int *trigger, int *polarity)
+ struct io_apic_irq_attr *io_apic_irq)
{
int apic, i, best_guess = -1;
@@ -1127,10 +1126,10 @@ int IO_APIC_get_PCI_irq_vector(int bus,
continue;
if (pin == (mp_irqs[i].srcbusirq & 3)) {
- *ioapic = apic;
- *ioapic_pin = mp_irqs[i].dstirq;
- *trigger = irq_trigger(i);
- *polarity = irq_polarity(i);
+ io_apic_irq->ioapic = apic;
+ io_apic_irq->ioapic_pin = mp_irqs[i].dstirq;
+ io_apic_irq->trigger = irq_trigger(i);
+ io_apic_irq->polarity = irq_polarity(i);
return irq;
}
/*
@@ -1138,10 +1137,10 @@ int IO_APIC_get_PCI_irq_vector(int bus,
* best-guess fuzzy result for broken mptables.
*/
if (best_guess < 0) {
- *ioapic = apic;
- *ioapic_pin = mp_irqs[i].dstirq;
- *trigger = irq_trigger(i);
- *polarity = irq_polarity(i);
+ io_apic_irq->ioapic = apic;
+ io_apic_irq->ioapic_pin = mp_irqs[i].dstirq;
+ io_apic_irq->trigger = irq_trigger(i);
+ io_apic_irq->polarity = irq_polarity(i);
best_guess = irq;
}
}
@@ -3848,13 +3847,16 @@ int __init arch_probe_nr_irqs(void)
}
#endif
-static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
+static int __io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *io_apic_irq)
{
struct irq_desc *desc;
struct irq_cfg *cfg;
int node;
+ int ioapic, pin;
+ int triggering, polarity;
+ ioapic = io_apic_irq->ioapic;
if (!IO_APIC_IRQ(irq)) {
apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
ioapic);
@@ -3872,6 +3874,10 @@ static int __io_apic_set_pci_routing(str
return 0;
}
+ pin = io_apic_irq->ioapic_pin;
+ triggering = io_apic_irq->trigger;
+ polarity = io_apic_irq->polarity;
+
/*
* IRQs < 16 are already in the irq_2_pin[] map
*/
@@ -3885,15 +3891,17 @@ static int __io_apic_set_pci_routing(str
return 0;
}
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
+int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *io_apic_irq)
{
-
+ int ioapic, pin;
/*
* Avoid pin reprogramming. PRTs typically include entries
* with redundant pin->gsi mappings (but unique PCI devices);
* we only program the IOAPIC on the first.
*/
+ ioapic = io_apic_irq->ioapic;
+ pin = io_apic_irq->ioapic_pin;
if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
pr_debug("Pin %d-%d already programmed\n",
mp_ioapics[ioapic].apicid, pin);
@@ -3901,8 +3909,7 @@ int io_apic_set_pci_routing(struct devic
}
set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
- return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
- triggering, polarity);
+ return __io_apic_set_pci_routing(dev, irq, io_apic_irq);
}
/* --------------------------------------------------------------------------
Index: linux-2.6/arch/x86/pci/irq.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/irq.c
+++ linux-2.6/arch/x86/pci/irq.c
@@ -1200,14 +1200,11 @@ static int pirq_enable_irq(struct pci_de
#ifdef CONFIG_X86_IO_APIC
struct pci_dev *temp_dev;
int irq;
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
+ struct io_apic_irq_attr io_apic_irq;
irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
PCI_SLOT(dev->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ pin - 1, &io_apic_irq);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1221,9 +1218,7 @@ static int pirq_enable_irq(struct pci_de
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ pin - 1, &io_apic_irq);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
@@ -1233,9 +1228,7 @@ static int pirq_enable_irq(struct pci_de
}
dev = temp_dev;
if (irq >= 0) {
- io_apic_set_pci_routing(&dev->dev, ioapic,
- ioapic_pin, irq,
- triggering, polarity);
+ io_apic_set_pci_routing(&dev->dev, irq, &io_apic_irq);
dev->irq = irq;
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
Index: linux-2.6/drivers/pci/hotplug/ibmphp_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/ibmphp_core.c
+++ linux-2.6/drivers/pci/hotplug/ibmphp_core.c
@@ -155,15 +155,12 @@ int ibmphp_init_devno(struct slot **cur_
for (loop = 0; loop < len; loop++) {
if ((*cur_slot)->number == rtable->slots[loop].slot &&
(*cur_slot)->bus == rtable->slots[loop].bus) {
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
+ struct io_apic_irq_attr io_apic_irq;
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
- (int) (*cur_slot)->device, i.
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ (int) (*cur_slot)->device, i, &io_apic_irq);
debug("(*cur_slot)->irq[0] = %x\n",
(*cur_slot)->irq[0]);
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector
2009-05-11 19:40 ` Yinghai Lu
@ 2009-05-11 21:37 ` Ingo Molnar
2009-05-11 22:55 ` [PATCH] x86: introduce io_apic_irq_attr -v2 Yinghai Lu
0 siblings, 1 reply; 37+ messages in thread
From: Ingo Molnar @ 2009-05-11 21:37 UTC (permalink / raw)
To: Yinghai Lu
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
* Yinghai Lu <yinghai@kernel.org> wrote:
> @@ -1198,6 +1198,7 @@ int mp_register_gsi(struct device *dev,
> {
> int ioapic;
> int ioapic_pin;
> + struct io_apic_irq_attr io_apic_irq;
please call the variable name 'irq_attr' or so.
> + io_apic_irq.ioapic = ioapic;
> + io_apic_irq.ioapic_pin = ioapic_pin;
> + io_apic_irq.trigger = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
> + io_apic_irq.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
> + io_apic_set_pci_routing(dev, gsi, &io_apic_irq);
I think we've been through this before :-/ Doesnt this:
io_apic_irq.ioapic = ioapic;
io_apic_irq.ioapic_pin = ioapic_pin;
io_apic_irq.trigger = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
io_apic_irq.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
Look nicer?
Also, please do s/triggering/trigger
Thanks,
Ingo
^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH] x86: introduce io_apic_irq_attr -v2
2009-05-11 21:37 ` Ingo Molnar
@ 2009-05-11 22:55 ` Yinghai Lu
2009-05-12 10:32 ` Ingo Molnar
2009-05-18 7:39 ` [tip:irq/numa] x86, apic: introduce io_apic_irq_attr tip-bot for Yinghai Lu
0 siblings, 2 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-11 22:55 UTC (permalink / raw)
To: Ingo Molnar
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
according to Ingo, some io_apic related function get too more parameter
So reduce related funcs to get less param by passing io_apic_irq pointer
v2: io_apic_irq ==> irq_attr
triggering ==> trigger
[ Impact: cleanup ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/hw_irq.h | 11 +++++++--
arch/x86/include/asm/io_apic.h | 5 ++--
arch/x86/kernel/acpi/boot.c | 23 +++++++++++---------
arch/x86/kernel/apic/io_apic.c | 43 ++++++++++++++++++++++----------------
arch/x86/pci/irq.c | 16 ++++----------
drivers/pci/hotplug/ibmphp_core.c | 8 ++-----
6 files changed, 58 insertions(+), 48 deletions(-)
Index: linux-2.6/arch/x86/include/asm/hw_irq.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/hw_irq.h
+++ linux-2.6/arch/x86/include/asm/hw_irq.h
@@ -66,9 +66,16 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
+
+struct io_apic_irq_attr {
+ int ioapic;
+ int ioapic_pin;
+ int trigger;
+ int polarity;
+};
+
extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
- int *ioapic, int *ioapic_pin,
- int *trigger, int *polarity);
+ struct io_apic_irq_attr *irq_attr);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
Index: linux-2.6/arch/x86/include/asm/io_apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/io_apic.h
+++ linux-2.6/arch/x86/include/asm/io_apic.h
@@ -156,8 +156,9 @@ extern int io_apic_get_version(int ioapi
extern int io_apic_get_redir_entries(int ioapic);
#endif /* CONFIG_ACPI */
-extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
- int irq, int edge_level, int active_high_low);
+struct io_apic_irq_attr;
+extern int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -523,7 +523,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned in
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
@@ -533,14 +533,14 @@ int acpi_register_gsi(struct device *dev
* Make sure all (legacy) PCI IRQs are set as level-triggered.
*/
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
- if (triggering == ACPI_LEVEL_SENSITIVE)
+ if (trigger == ACPI_LEVEL_SENSITIVE)
eisa_set_level_irq(gsi);
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
- plat_gsi = mp_register_gsi(dev, gsi, triggering, polarity);
+ plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
}
#endif
acpi_gsi_to_irq(plat_gsi, &irq);
@@ -1156,7 +1156,7 @@ void __init mp_config_acpi_legacy_irqs(v
}
}
-static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering,
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
int polarity)
{
#ifdef CONFIG_X86_MPPARSE
@@ -1181,7 +1181,7 @@ static int mp_config_acpi_gsi(struct dev
/* print the entry should happen on mptable identically */
mp_irq.type = MP_INTSRC;
mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
mp_irq.srcbus = number;
mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
@@ -1194,10 +1194,11 @@ static int mp_config_acpi_gsi(struct dev
return 0;
}
-int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
int ioapic;
int ioapic_pin;
+ struct io_apic_irq_attr irq_attr;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
@@ -1225,11 +1226,13 @@ int mp_register_gsi(struct device *dev,
ioapic_pin);
return gsi;
}
- mp_config_acpi_gsi(dev, gsi, triggering, polarity);
+ mp_config_acpi_gsi(dev, gsi, trigger, polarity);
- io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ irq_attr.ioapic = ioapic;
+ irq_attr.ioapic_pin = ioapic_pin;
+ irq_attr.trigger = (trigger == ACPI_EDGE_SENSITIVE ? 0 : 1);
+ irq_attr.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_set_pci_routing(dev, gsi, &irq_attr);
return gsi;
}
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -1097,8 +1097,7 @@ static int pin_2_irq(int idx, int apic,
* Not an __init, possibly needed by modules
*/
int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
- int *ioapic, int *ioapic_pin,
- int *trigger, int *polarity)
+ struct io_apic_irq_attr *irq_attr)
{
int apic, i, best_guess = -1;
@@ -1128,10 +1127,10 @@ int IO_APIC_get_PCI_irq_vector(int bus,
continue;
if (pin == (mp_irqs[i].srcbusirq & 3)) {
- *ioapic = apic;
- *ioapic_pin = mp_irqs[i].dstirq;
- *trigger = irq_trigger(i);
- *polarity = irq_polarity(i);
+ irq_attr->ioapic = apic;
+ irq_attr->ioapic_pin = mp_irqs[i].dstirq;
+ irq_attr->trigger = irq_trigger(i);
+ irq_attr->polarity = irq_polarity(i);
return irq;
}
/*
@@ -1139,10 +1138,10 @@ int IO_APIC_get_PCI_irq_vector(int bus,
* best-guess fuzzy result for broken mptables.
*/
if (best_guess < 0) {
- *ioapic = apic;
- *ioapic_pin = mp_irqs[i].dstirq;
- *trigger = irq_trigger(i);
- *polarity = irq_polarity(i);
+ irq_attr->ioapic = apic;
+ irq_attr->ioapic_pin = mp_irqs[i].dstirq;
+ irq_attr->trigger = irq_trigger(i);
+ irq_attr->polarity = irq_polarity(i);
best_guess = irq;
}
}
@@ -3866,13 +3865,16 @@ int __init arch_probe_nr_irqs(void)
}
#endif
-static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
+static int __io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr)
{
struct irq_desc *desc;
struct irq_cfg *cfg;
int node;
+ int ioapic, pin;
+ int trigger, polarity;
+ ioapic = irq_attr->ioapic;
if (!IO_APIC_IRQ(irq)) {
apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
ioapic);
@@ -3890,6 +3892,10 @@ static int __io_apic_set_pci_routing(str
return 0;
}
+ pin = irq_attr->ioapic_pin;
+ trigger = irq_attr->trigger;
+ polarity = irq_attr->polarity;
+
/*
* IRQs < 16 are already in the irq_2_pin[] map
*/
@@ -3898,20 +3904,22 @@ static int __io_apic_set_pci_routing(str
add_pin_to_irq_node(cfg, node, ioapic, pin);
}
- setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
+ setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
return 0;
}
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
+int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr)
{
-
+ int ioapic, pin;
/*
* Avoid pin reprogramming. PRTs typically include entries
* with redundant pin->gsi mappings (but unique PCI devices);
* we only program the IOAPIC on the first.
*/
+ ioapic = irq_attr->ioapic;
+ pin = irq_attr->ioapic_pin;
if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
pr_debug("Pin %d-%d already programmed\n",
mp_ioapics[ioapic].apicid, pin);
@@ -3919,8 +3927,7 @@ int io_apic_set_pci_routing(struct devic
}
set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
- return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
- triggering, polarity);
+ return __io_apic_set_pci_routing(dev, irq, irq_attr);
}
/* --------------------------------------------------------------------------
Index: linux-2.6/arch/x86/pci/irq.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/irq.c
+++ linux-2.6/arch/x86/pci/irq.c
@@ -1200,14 +1200,11 @@ static int pirq_enable_irq(struct pci_de
#ifdef CONFIG_X86_IO_APIC
struct pci_dev *temp_dev;
int irq;
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
+ struct io_apic_irq_attr irq_attr;
irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
PCI_SLOT(dev->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ pin - 1, &irq_attr);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1221,9 +1218,7 @@ static int pirq_enable_irq(struct pci_de
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ pin - 1, &irq_attr);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
@@ -1233,9 +1228,8 @@ static int pirq_enable_irq(struct pci_de
}
dev = temp_dev;
if (irq >= 0) {
- io_apic_set_pci_routing(&dev->dev, ioapic,
- ioapic_pin, irq,
- triggering, polarity);
+ io_apic_set_pci_routing(&dev->dev, irq,
+ &irq_attr);
dev->irq = irq;
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
Index: linux-2.6/drivers/pci/hotplug/ibmphp_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/ibmphp_core.c
+++ linux-2.6/drivers/pci/hotplug/ibmphp_core.c
@@ -155,15 +155,13 @@ int ibmphp_init_devno(struct slot **cur_
for (loop = 0; loop < len; loop++) {
if ((*cur_slot)->number == rtable->slots[loop].slot &&
(*cur_slot)->bus == rtable->slots[loop].bus) {
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
+ struct io_apic_irq_attr irq_attr;
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
- (int) (*cur_slot)->device, i.
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ (int) (*cur_slot)->device, i,
+ &irq_attr);
debug("(*cur_slot)->irq[0] = %x\n",
(*cur_slot)->irq[0]);
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH] x86: introduce io_apic_irq_attr -v2
2009-05-11 22:55 ` [PATCH] x86: introduce io_apic_irq_attr -v2 Yinghai Lu
@ 2009-05-12 10:32 ` Ingo Molnar
2009-05-12 15:17 ` Yinghai Lu
2009-05-12 18:02 ` Yinghai Lu
2009-05-18 7:39 ` [tip:irq/numa] x86, apic: introduce io_apic_irq_attr tip-bot for Yinghai Lu
1 sibling, 2 replies; 37+ messages in thread
From: Ingo Molnar @ 2009-05-12 10:32 UTC (permalink / raw)
To: Yinghai Lu
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
* Yinghai Lu <yinghai@kernel.org> wrote:
> + irq_attr->ioapic = apic;
> + irq_attr->ioapic_pin = mp_irqs[i].dstirq;
> + irq_attr->trigger = irq_trigger(i);
> + irq_attr->polarity = irq_polarity(i);
> + irq_attr->ioapic = apic;
> + irq_attr->ioapic_pin = mp_irqs[i].dstirq;
> + irq_attr->trigger = irq_trigger(i);
> + irq_attr->polarity = irq_polarity(i);
Shouldnt this be factored out ino a helper function?
Ingo
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH] x86: introduce io_apic_irq_attr -v2
2009-05-12 10:32 ` Ingo Molnar
@ 2009-05-12 15:17 ` Yinghai Lu
2009-05-12 18:02 ` Yinghai Lu
1 sibling, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-12 15:17 UTC (permalink / raw)
To: Ingo Molnar
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
On Tue, May 12, 2009 at 3:32 AM, Ingo Molnar <mingo@elte.hu> wrote:
>
> * Yinghai Lu <yinghai@kernel.org> wrote:
>
>> + irq_attr->ioapic = apic;
>> + irq_attr->ioapic_pin = mp_irqs[i].dstirq;
>> + irq_attr->trigger = irq_trigger(i);
>> + irq_attr->polarity = irq_polarity(i);
>
>> + irq_attr->ioapic = apic;
>> + irq_attr->ioapic_pin = mp_irqs[i].dstirq;
>> + irq_attr->trigger = irq_trigger(i);
>> + irq_attr->polarity = irq_polarity(i);
>
> Shouldnt this be factored out ino a helper function?
>
set_io_apic_irq_attr()?
YH
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH] x86: introduce io_apic_irq_attr -v2
2009-05-12 10:32 ` Ingo Molnar
2009-05-12 15:17 ` Yinghai Lu
@ 2009-05-12 18:02 ` Yinghai Lu
1 sibling, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-12 18:02 UTC (permalink / raw)
To: Ingo Molnar
Cc: Thomas Gleixner, H. Peter Anvin, Andrew Morton, Jesse Barnes,
Len Brown, linux-kernel, linux-pci, ACPI Devel Maling List
[PATCH] x86: introduce io_apic_irq_attr -v3
according to Ingo, some io_apic related function get too more parameter
So reduce related funcs to get less param by passing io_apic_irq pointer
v2: io_apic_irq ==> irq_attr
triggering ==> trigger
v3: add set_io_apic_irq_attr
[ Impact: cleanup ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/hw_irq.h | 21 ++++++++++++++++--
arch/x86/include/asm/io_apic.h | 5 ++--
arch/x86/kernel/acpi/boot.c | 22 ++++++++++---------
arch/x86/kernel/apic/io_apic.c | 43 ++++++++++++++++++++++----------------
arch/x86/pci/irq.c | 16 ++++----------
drivers/pci/hotplug/ibmphp_core.c | 6 +----
6 files changed, 66 insertions(+), 47 deletions(-)
Index: linux-2.6/arch/x86/include/asm/hw_irq.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/hw_irq.h
+++ linux-2.6/arch/x86/include/asm/hw_irq.h
@@ -66,9 +66,26 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
+
+struct io_apic_irq_attr {
+ int ioapic;
+ int ioapic_pin;
+ int trigger;
+ int polarity;
+};
+
+static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
+ int ioapic, int ioapic_pin,
+ int trigger, int polarity)
+{
+ irq_attr->ioapic = ioapic;
+ irq_attr->ioapic_pin = ioapic_pin;
+ irq_attr->trigger = trigger;
+ irq_attr->polarity = polarity;
+}
+
extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
- int *ioapic, int *ioapic_pin,
- int *trigger, int *polarity);
+ struct io_apic_irq_attr *irq_attr);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
Index: linux-2.6/arch/x86/include/asm/io_apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/io_apic.h
+++ linux-2.6/arch/x86/include/asm/io_apic.h
@@ -156,8 +156,9 @@ extern int io_apic_get_version(int ioapi
extern int io_apic_get_redir_entries(int ioapic);
#endif /* CONFIG_ACPI */
-extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
- int irq, int edge_level, int active_high_low);
+struct io_apic_irq_attr;
+extern int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -523,7 +523,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned in
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
@@ -533,14 +533,14 @@ int acpi_register_gsi(struct device *dev
* Make sure all (legacy) PCI IRQs are set as level-triggered.
*/
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
- if (triggering == ACPI_LEVEL_SENSITIVE)
+ if (trigger == ACPI_LEVEL_SENSITIVE)
eisa_set_level_irq(gsi);
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
- plat_gsi = mp_register_gsi(dev, gsi, triggering, polarity);
+ plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
}
#endif
acpi_gsi_to_irq(plat_gsi, &irq);
@@ -1156,7 +1156,7 @@ void __init mp_config_acpi_legacy_irqs(v
}
}
-static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering,
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
int polarity)
{
#ifdef CONFIG_X86_MPPARSE
@@ -1181,7 +1181,7 @@ static int mp_config_acpi_gsi(struct dev
/* print the entry should happen on mptable identically */
mp_irq.type = MP_INTSRC;
mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
mp_irq.srcbus = number;
mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
@@ -1194,10 +1194,11 @@ static int mp_config_acpi_gsi(struct dev
return 0;
}
-int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
int ioapic;
int ioapic_pin;
+ struct io_apic_irq_attr irq_attr;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
@@ -1225,11 +1226,12 @@ int mp_register_gsi(struct device *dev,
ioapic_pin);
return gsi;
}
- mp_config_acpi_gsi(dev, gsi, triggering, polarity);
+ mp_config_acpi_gsi(dev, gsi, trigger, polarity);
- io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+ trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_set_pci_routing(dev, gsi, &irq_attr);
return gsi;
}
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -1097,8 +1097,7 @@ static int pin_2_irq(int idx, int apic,
* Not an __init, possibly needed by modules
*/
int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
- int *ioapic, int *ioapic_pin,
- int *trigger, int *polarity)
+ struct io_apic_irq_attr *irq_attr)
{
int apic, i, best_guess = -1;
@@ -1128,10 +1127,10 @@ int IO_APIC_get_PCI_irq_vector(int bus,
continue;
if (pin == (mp_irqs[i].srcbusirq & 3)) {
- *ioapic = apic;
- *ioapic_pin = mp_irqs[i].dstirq;
- *trigger = irq_trigger(i);
- *polarity = irq_polarity(i);
+ set_io_apic_irq_attr(irq_attr, apic,
+ mp_irqs[i].dstirq,
+ irq_trigger(i),
+ irq_polarity(i));
return irq;
}
/*
@@ -1139,10 +1138,10 @@ int IO_APIC_get_PCI_irq_vector(int bus,
* best-guess fuzzy result for broken mptables.
*/
if (best_guess < 0) {
- *ioapic = apic;
- *ioapic_pin = mp_irqs[i].dstirq;
- *trigger = irq_trigger(i);
- *polarity = irq_polarity(i);
+ set_io_apic_irq_attr(irq_attr, apic,
+ mp_irqs[i].dstirq,
+ irq_trigger(i),
+ irq_polarity(i));
best_guess = irq;
}
}
@@ -3866,13 +3865,16 @@ int __init arch_probe_nr_irqs(void)
}
#endif
-static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
+static int __io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr)
{
struct irq_desc *desc;
struct irq_cfg *cfg;
int node;
+ int ioapic, pin;
+ int trigger, polarity;
+ ioapic = irq_attr->ioapic;
if (!IO_APIC_IRQ(irq)) {
apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
ioapic);
@@ -3890,6 +3892,10 @@ static int __io_apic_set_pci_routing(str
return 0;
}
+ pin = irq_attr->ioapic_pin;
+ trigger = irq_attr->trigger;
+ polarity = irq_attr->polarity;
+
/*
* IRQs < 16 are already in the irq_2_pin[] map
*/
@@ -3898,20 +3904,22 @@ static int __io_apic_set_pci_routing(str
add_pin_to_irq_node(cfg, node, ioapic, pin);
}
- setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
+ setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
return 0;
}
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
+int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr)
{
-
+ int ioapic, pin;
/*
* Avoid pin reprogramming. PRTs typically include entries
* with redundant pin->gsi mappings (but unique PCI devices);
* we only program the IOAPIC on the first.
*/
+ ioapic = irq_attr->ioapic;
+ pin = irq_attr->ioapic_pin;
if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
pr_debug("Pin %d-%d already programmed\n",
mp_ioapics[ioapic].apicid, pin);
@@ -3919,8 +3927,7 @@ int io_apic_set_pci_routing(struct devic
}
set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
- return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
- triggering, polarity);
+ return __io_apic_set_pci_routing(dev, irq, irq_attr);
}
/* --------------------------------------------------------------------------
Index: linux-2.6/arch/x86/pci/irq.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/irq.c
+++ linux-2.6/arch/x86/pci/irq.c
@@ -1200,14 +1200,11 @@ static int pirq_enable_irq(struct pci_de
#ifdef CONFIG_X86_IO_APIC
struct pci_dev *temp_dev;
int irq;
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
+ struct io_apic_irq_attr irq_attr;
irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
PCI_SLOT(dev->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ pin - 1, &irq_attr);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1221,9 +1218,7 @@ static int pirq_enable_irq(struct pci_de
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ pin - 1, &irq_attr);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
@@ -1233,9 +1228,8 @@ static int pirq_enable_irq(struct pci_de
}
dev = temp_dev;
if (irq >= 0) {
- io_apic_set_pci_routing(&dev->dev, ioapic,
- ioapic_pin, irq,
- triggering, polarity);
+ io_apic_set_pci_routing(&dev->dev, irq,
+ &irq_attr);
dev->irq = irq;
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
Index: linux-2.6/drivers/pci/hotplug/ibmphp_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/ibmphp_core.c
+++ linux-2.6/drivers/pci/hotplug/ibmphp_core.c
@@ -155,15 +155,13 @@ int ibmphp_init_devno(struct slot **cur_
for (loop = 0; loop < len; loop++) {
if ((*cur_slot)->number == rtable->slots[loop].slot &&
(*cur_slot)->bus == rtable->slots[loop].bus) {
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
+ struct io_apic_irq_attr irq_attr;
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
(int) (*cur_slot)->device, i,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ &irq_attr);
debug("(*cur_slot)->irq[0] = %x\n",
(*cur_slot)->irq[0]);
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH 2/7] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi -v2
2009-05-06 17:06 ` Yinghai Lu
(?)
(?)
@ 2009-05-14 16:20 ` Len Brown
2009-05-14 17:43 ` Yinghai Lu
-1 siblings, 1 reply; 37+ messages in thread
From: Len Brown @ 2009-05-14 16:20 UTC (permalink / raw)
To: Yinghai Lu
Cc: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes, linux-kernel, linux-pci, ACPI Devel Maling List
mp_config_acpi_gsi() has been dead code since the day it went into 2.6.27.
Rather than repairing that, I'd rather see it removed.
The justification for 2944e16b25e7fb8b5ee0dd9dc7197a0f9e523cfd
"x86: update mptable" was:
1. kexec kernel with acpi=off
2. work around BIOSes where acpi routing is working, but mptable is
not right, so can use kernel/kexec to start other OSes that don't have
good acpi support.
command line: update_mptable
So this is a command line option to allow
MPS code to call into ACPI code to support kexec from an ACPI
mode into non-ACPI mode -- all without a single comment in the code.
I'm not convinced that the scenario that this code was
intended to address justifies adding unreadable code to
an area of the kernel which is notoriously over-complicated
and fragile. Doing so is the opposite of optimizing for maintenance.
No, I don't want to see any MPS code ever call into ACPI code.
thanks,
Len Brown, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [PATCH 2/7] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi -v2
2009-05-14 16:20 ` [PATCH 2/7] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi -v2 Len Brown
@ 2009-05-14 17:43 ` Yinghai Lu
0 siblings, 0 replies; 37+ messages in thread
From: Yinghai Lu @ 2009-05-14 17:43 UTC (permalink / raw)
To: Len Brown
Cc: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Jesse Barnes, linux-kernel, linux-pci, ACPI Devel Maling List
Len Brown wrote:
> mp_config_acpi_gsi() has been dead code since the day it went into 2.6.27.
> Rather than repairing that, I'd rather see it removed.
>
> The justification for 2944e16b25e7fb8b5ee0dd9dc7197a0f9e523cfd
> "x86: update mptable" was:
>
> 1. kexec kernel with acpi=off
> 2. work around BIOSes where acpi routing is working, but mptable is
> not right, so can use kernel/kexec to start other OSes that don't have
> good acpi support.
>
> command line: update_mptable
>
> So this is a command line option to allow
> MPS code to call into ACPI code to support kexec from an ACPI
> mode into non-ACPI mode -- all without a single comment in the code.
>
> I'm not convinced that the scenario that this code was
> intended to address justifies adding unreadable code to
> an area of the kernel which is notoriously over-complicated
> and fragile. Doing so is the opposite of optimizing for maintenance.
also could use it to show BIOS engineers what is correct mptable and that could help them to
fix the problem in mptable creating when the system have a lot pci cards with bridge in the card.
>
> No, I don't want to see any MPS code ever call into ACPI code.
how about:
make enable_update_mptable global, and in mp_register_gsi only call mp_config_acpi_gsi()
when enable_update_mptable == 1
YH
^ permalink raw reply [flat|nested] 37+ messages in thread
* [tip:irq/numa] x86, apic: introduce io_apic_irq_attr
2009-05-11 22:55 ` [PATCH] x86: introduce io_apic_irq_attr -v2 Yinghai Lu
2009-05-12 10:32 ` Ingo Molnar
@ 2009-05-18 7:39 ` tip-bot for Yinghai Lu
1 sibling, 0 replies; 37+ messages in thread
From: tip-bot for Yinghai Lu @ 2009-05-18 7:39 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, yinghai, lenb, akpm, jbarnes, tglx, mingo
Commit-ID: e5198075c67a22ec9a09565b1ce88d3d3f5ba855
Gitweb: http://git.kernel.org/tip/e5198075c67a22ec9a09565b1ce88d3d3f5ba855
Author: Yinghai Lu <yinghai@kernel.org>
AuthorDate: Fri, 15 May 2009 13:05:16 -0700
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Mon, 18 May 2009 08:38:55 +0200
x86, apic: introduce io_apic_irq_attr
according to Ingo, io_apic irq-setup related functions have too many
parameters with a repetitive signature.
So reduce related funcs to get less params by passing a pointer
to a newly defined io_apic_irq_attr structure.
v2: io_apic_irq ==> irq_attr
triggering ==> trigger
v3: add set_io_apic_irq_attr
[ Impact: cleanup ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A08ACD3.2070401@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/include/asm/hw_irq.h | 21 ++++++++++++++++-
arch/x86/include/asm/io_apic.h | 5 ++-
arch/x86/kernel/acpi/boot.c | 22 ++++++++++--------
arch/x86/kernel/apic/io_apic.c | 43 +++++++++++++++++++++---------------
arch/x86/pci/irq.c | 16 ++++---------
drivers/pci/hotplug/ibmphp_core.c | 6 +---
6 files changed, 66 insertions(+), 47 deletions(-)
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 26a40ab..a7d14bb 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -63,9 +63,26 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
+
+struct io_apic_irq_attr {
+ int ioapic;
+ int ioapic_pin;
+ int trigger;
+ int polarity;
+};
+
+static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
+ int ioapic, int ioapic_pin,
+ int trigger, int polarity)
+{
+ irq_attr->ioapic = ioapic;
+ irq_attr->ioapic_pin = ioapic_pin;
+ irq_attr->trigger = trigger;
+ irq_attr->polarity = polarity;
+}
+
extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
- int *ioapic, int *ioapic_pin,
- int *trigger, int *polarity);
+ struct io_apic_irq_attr *irq_attr);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 6fd99f9..daf866e 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -156,8 +156,9 @@ extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
#endif /* CONFIG_ACPI */
-extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
- int irq, int edge_level, int active_high_low);
+struct io_apic_irq_attr;
+extern int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index dcfbc3a..4af63df 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -523,7 +523,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
@@ -533,14 +533,14 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
* Make sure all (legacy) PCI IRQs are set as level-triggered.
*/
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
- if (triggering == ACPI_LEVEL_SENSITIVE)
+ if (trigger == ACPI_LEVEL_SENSITIVE)
eisa_set_level_irq(gsi);
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
- plat_gsi = mp_register_gsi(dev, gsi, triggering, polarity);
+ plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
}
#endif
acpi_gsi_to_irq(plat_gsi, &irq);
@@ -1156,7 +1156,7 @@ void __init mp_config_acpi_legacy_irqs(void)
}
}
-static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering,
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
int polarity)
{
#ifdef CONFIG_X86_MPPARSE
@@ -1181,7 +1181,7 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering,
/* print the entry should happen on mptable identically */
mp_irq.type = MP_INTSRC;
mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
mp_irq.srcbus = number;
mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
@@ -1194,10 +1194,11 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering,
return 0;
}
-int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
int ioapic;
int ioapic_pin;
+ struct io_apic_irq_attr irq_attr;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
@@ -1225,11 +1226,12 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
ioapic_pin);
return gsi;
}
- mp_config_acpi_gsi(dev, gsi, triggering, polarity);
+ mp_config_acpi_gsi(dev, gsi, trigger, polarity);
- io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+ trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_set_pci_routing(dev, gsi, &irq_attr);
return gsi;
}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 74d2b48..ce1ac74 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1096,8 +1096,7 @@ static int pin_2_irq(int idx, int apic, int pin)
* Not an __init, possibly needed by modules
*/
int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
- int *ioapic, int *ioapic_pin,
- int *trigger, int *polarity)
+ struct io_apic_irq_attr *irq_attr)
{
int apic, i, best_guess = -1;
@@ -1127,10 +1126,10 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
continue;
if (pin == (mp_irqs[i].srcbusirq & 3)) {
- *ioapic = apic;
- *ioapic_pin = mp_irqs[i].dstirq;
- *trigger = irq_trigger(i);
- *polarity = irq_polarity(i);
+ set_io_apic_irq_attr(irq_attr, apic,
+ mp_irqs[i].dstirq,
+ irq_trigger(i),
+ irq_polarity(i));
return irq;
}
/*
@@ -1138,10 +1137,10 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
* best-guess fuzzy result for broken mptables.
*/
if (best_guess < 0) {
- *ioapic = apic;
- *ioapic_pin = mp_irqs[i].dstirq;
- *trigger = irq_trigger(i);
- *polarity = irq_polarity(i);
+ set_io_apic_irq_attr(irq_attr, apic,
+ mp_irqs[i].dstirq,
+ irq_trigger(i),
+ irq_polarity(i));
best_guess = irq;
}
}
@@ -3865,13 +3864,16 @@ int __init arch_probe_nr_irqs(void)
}
#endif
-static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
+static int __io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr)
{
struct irq_desc *desc;
struct irq_cfg *cfg;
int node;
+ int ioapic, pin;
+ int trigger, polarity;
+ ioapic = irq_attr->ioapic;
if (!IO_APIC_IRQ(irq)) {
apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
ioapic);
@@ -3889,6 +3891,10 @@ static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, in
return 0;
}
+ pin = irq_attr->ioapic_pin;
+ trigger = irq_attr->trigger;
+ polarity = irq_attr->polarity;
+
/*
* IRQs < 16 are already in the irq_2_pin[] map
*/
@@ -3897,20 +3903,22 @@ static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, in
add_pin_to_irq_node(cfg, node, ioapic, pin);
}
- setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
+ setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
return 0;
}
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
+int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr)
{
-
+ int ioapic, pin;
/*
* Avoid pin reprogramming. PRTs typically include entries
* with redundant pin->gsi mappings (but unique PCI devices);
* we only program the IOAPIC on the first.
*/
+ ioapic = irq_attr->ioapic;
+ pin = irq_attr->ioapic_pin;
if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
pr_debug("Pin %d-%d already programmed\n",
mp_ioapics[ioapic].apicid, pin);
@@ -3918,8 +3926,7 @@ int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
}
set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
- return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
- triggering, polarity);
+ return __io_apic_set_pci_routing(dev, irq, irq_attr);
}
/* --------------------------------------------------------------------------
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 2f3e192..0696d50 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -1200,14 +1200,11 @@ static int pirq_enable_irq(struct pci_dev *dev)
#ifdef CONFIG_X86_IO_APIC
struct pci_dev *temp_dev;
int irq;
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
+ struct io_apic_irq_attr irq_attr;
irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
PCI_SLOT(dev->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ pin - 1, &irq_attr);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1221,9 +1218,7 @@ static int pirq_enable_irq(struct pci_dev *dev)
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ pin - 1, &irq_attr);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
@@ -1233,9 +1228,8 @@ static int pirq_enable_irq(struct pci_dev *dev)
}
dev = temp_dev;
if (irq >= 0) {
- io_apic_set_pci_routing(&dev->dev, ioapic,
- ioapic_pin, irq,
- triggering, polarity);
+ io_apic_set_pci_routing(&dev->dev, irq,
+ &irq_attr);
dev->irq = irq;
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 79901a0..42e4260 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -155,15 +155,13 @@ int ibmphp_init_devno(struct slot **cur_slot)
for (loop = 0; loop < len; loop++) {
if ((*cur_slot)->number == rtable->slots[loop].slot &&
(*cur_slot)->bus == rtable->slots[loop].bus) {
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
+ struct io_apic_irq_attr irq_attr;
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
(int) (*cur_slot)->device, i,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ &irq_attr);
debug("(*cur_slot)->irq[0] = %x\n",
(*cur_slot)->irq[0]);
^ permalink raw reply related [flat|nested] 37+ messages in thread
end of thread, other threads:[~2009-05-18 7:40 UTC | newest]
Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-05-06 17:05 [PATCH 1/7] x86/acpi: remove compress irq trick for 32bit Yinghai Lu
2009-05-06 17:05 ` Yinghai Lu
2009-05-06 17:06 ` [PATCH 2/7] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi -v2 Yinghai Lu
2009-05-06 17:06 ` Yinghai Lu
2009-05-11 9:52 ` [tip:irq/numa] x86/acpi: call mp_config_acpi_gsi() in mp_register_gsi() tip-bot for Yinghai Lu
2009-05-14 16:20 ` [PATCH 2/7] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi -v2 Len Brown
2009-05-14 17:43 ` Yinghai Lu
2009-05-06 17:07 ` [PATCH 3/7] x86: fix alloc_mptable Yinghai Lu
2009-05-06 17:07 ` Yinghai Lu
2009-05-11 8:22 ` Ingo Molnar
2009-05-11 9:52 ` [tip:irq/numa] x86: fix alloc_mptable() tip-bot for Yinghai Lu
2009-05-06 17:07 ` [PATCH 4/7] x86/acpi: move pin_programmed bit map to io_apic.c Yinghai Lu
2009-05-06 17:07 ` Yinghai Lu
2009-05-11 9:52 ` [tip:irq/numa] " tip-bot for Yinghai Lu
2009-05-06 17:08 ` [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector Yinghai Lu
2009-05-06 17:08 ` Yinghai Lu
2009-05-07 14:10 ` Ingo Molnar
2009-05-11 8:28 ` Ingo Molnar
2009-05-11 19:40 ` Yinghai Lu
2009-05-11 21:37 ` Ingo Molnar
2009-05-11 22:55 ` [PATCH] x86: introduce io_apic_irq_attr -v2 Yinghai Lu
2009-05-12 10:32 ` Ingo Molnar
2009-05-12 15:17 ` Yinghai Lu
2009-05-12 18:02 ` Yinghai Lu
2009-05-18 7:39 ` [tip:irq/numa] x86, apic: introduce io_apic_irq_attr tip-bot for Yinghai Lu
2009-05-11 9:05 ` [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector Ingo Molnar
2009-05-11 9:52 ` [tip:irq/numa] x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector() tip-bot for Yinghai Lu
2009-05-06 17:08 ` [PATCH 6/7] x86/acpi: move setup io apic routing out of ACPI macro scope Yinghai Lu
2009-05-06 17:08 ` Yinghai Lu
2009-05-11 9:53 ` [tip:irq/numa] x86/acpi: move setup io apic routing out of CONFIG_ACPI scope tip-bot for Yinghai Lu
2009-05-06 17:10 ` [PATCH 7/7] x86/pci: update pirq_enable_irq to setup io apic routing -v2 Yinghai Lu
2009-05-06 17:10 ` Yinghai Lu
2009-05-07 14:12 ` Ingo Molnar
2009-05-07 16:52 ` Jesse Barnes
2009-05-11 7:49 ` Ingo Molnar
2009-05-11 9:53 ` [tip:irq/numa] x86/pci: update pirq_enable_irq() to setup io apic routing tip-bot for Yinghai Lu
2009-05-11 9:52 ` [tip:irq/numa] x86/acpi: remove irq-compression trick on 32-bit tip-bot for Yinghai Lu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.