From: "Frank Wunderlich" <frank-w@public-files.de>
To: "Landen Chao" <landen.chao@mediatek.com>
Cc: andrew@lunn.ch, f.fainelli@gmail.com,
vivien.didelot@savoirfairelinux.com, matthias.bgg@gmail.com,
robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
davem@davemloft.net, sean.wang@mediatek.com,
opensource@vdorst.com, "Landen Chao" <landen.chao@mediatek.com>
Subject: Aw: [PATCH net-next 0/6] net-next: dsa: mt7530: add support for MT7531
Date: Tue, 10 Dec 2019 12:37:08 +0100 [thread overview]
Message-ID: <trinity-be64e2d4-f70d-4bd8-82aa-fb5b07de0149-1575977828752@3c-app-gmx-bs14> (raw)
In-Reply-To: <cover.1575914275.git.landen.chao@mediatek.com>
Hi
thank you for the DSA-driver, works so far, but a bit to improve:
i got some retransmitts on RX (TX looks good)...i guess a clk/pll problem
Iperf3-Client (BPI-R64,192.168.0.19):
root@bpi-r64:~# iperf3 -c 192.168.0.21
Connecting to host 192.168.0.21, port 5201
[ 5] local 192.168.0.19 port 56412 connected to 192.168.0.21 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 114 MBytes 957 Mbits/sec 0 1003 KBytes
[ 5] 1.00-2.00 sec 113 MBytes 944 Mbits/sec 0 1.08 MBytes
[ 5] 2.00-3.00 sec 112 MBytes 941 Mbits/sec 0 1.08 MBytes
[ 5] 3.00-4.00 sec 112 MBytes 941 Mbits/sec 0 1.08 MBytes
[ 5] 4.00-5.00 sec 112 MBytes 942 Mbits/sec 0 1.08 MBytes
[ 5] 5.00-6.00 sec 112 MBytes 944 Mbits/sec 0 1.21 MBytes
[ 5] 6.00-7.00 sec 112 MBytes 944 Mbits/sec 0 1.27 MBytes
[ 5] 7.00-8.00 sec 112 MBytes 943 Mbits/sec 0 1.27 MBytes
[ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec 0 1.27 MBytes
[ 5] 9.00-10.00 sec 112 MBytes 944 Mbits/sec 0 1.27 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.10 GBytes 943 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 1.10 GBytes 941 Mbits/sec receiver
iperf Done.
root@bpi-r64:~# iperf3 -c 192.168.0.21 -R
Connecting to host 192.168.0.21, port 5201
Reverse mode, remote host 192.168.0.21 is sending
[ 5] local 192.168.0.19 port 56420 connected to 192.168.0.21 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec
[ 5] 1.00-2.00 sec 112 MBytes 941 Mbits/sec
[ 5] 2.00-3.00 sec 111 MBytes 933 Mbits/sec
[ 5] 3.00-4.00 sec 112 MBytes 941 Mbits/sec
[ 5] 4.00-5.00 sec 112 MBytes 937 Mbits/sec
[ 5] 5.00-6.00 sec 112 MBytes 941 Mbits/sec
[ 5] 6.00-7.00 sec 111 MBytes 933 Mbits/sec
[ 5] 7.00-8.00 sec 112 MBytes 939 Mbits/sec
[ 5] 8.00-9.00 sec 112 MBytes 936 Mbits/sec
[ 5] 9.00-10.00 sec 112 MBytes 941 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec 605 sender
[ 5] 0.00-10.00 sec 1.09 GBytes 939 Mbits/sec receiver
iperf Done.
Iperf3-Server (my Laptop,192.168.0.21, reverse mode only):
Accepted connection from 192.168.0.19, port 56418
[ 5] local 192.168.0.21 port 5201 connected to 192.168.0.19 port 56420
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 5] 0.00-1.00 sec 115 MBytes 965 Mbits/sec 0 772 KBytes
[ 5] 1.00-2.00 sec 112 MBytes 944 Mbits/sec 0 772 KBytes
[ 5] 2.00-3.00 sec 111 MBytes 933 Mbits/sec 157 643 KBytes
[ 5] 3.00-4.00 sec 112 MBytes 944 Mbits/sec 0 755 KBytes
[ 5] 4.00-5.00 sec 111 MBytes 933 Mbits/sec 141 625 KBytes
[ 5] 5.00-6.00 sec 112 MBytes 944 Mbits/sec 0 740 KBytes
[ 5] 6.00-7.00 sec 111 MBytes 933 Mbits/sec 307 438 KBytes
[ 5] 7.00-8.00 sec 111 MBytes 933 Mbits/sec 0 585 KBytes
[ 5] 8.00-9.00 sec 112 MBytes 944 Mbits/sec 0 700 KBytes
[ 5] 9.00-10.00 sec 112 MBytes 944 Mbits/sec 0 803 KBytes
[ 5] 10.00-10.00 sec 0.00 Bytes 0.00 bits/sec 0 803 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec 605 sender
[ 5] 0.00-10.00 sec 0.00 Bytes 0.00 bits/sec receiver
regards Frank
[1] https://github.com/frank-w/BPI-R2-4.14/tree/5.5-r64-netnext
WARNING: multiple messages have this Message-ID (diff)
From: "Frank Wunderlich" <frank-w@public-files.de>
To: "Landen Chao" <landen.chao@mediatek.com>
Cc: mark.rutland@arm.com, andrew@lunn.ch,
Landen Chao <landen.chao@mediatek.com>,
f.fainelli@gmail.com, vivien.didelot@savoirfairelinux.com,
netdev@vger.kernel.org, sean.wang@mediatek.com,
linux-kernel@vger.kernel.org, opensource@vdorst.com,
devicetree@vger.kernel.org, robh+dt@kernel.org,
linux-mediatek@lists.infradead.org, matthias.bgg@gmail.com,
davem@davemloft.net
Subject: Aw: [PATCH net-next 0/6] net-next: dsa: mt7530: add support for MT7531
Date: Tue, 10 Dec 2019 12:37:08 +0100 [thread overview]
Message-ID: <trinity-be64e2d4-f70d-4bd8-82aa-fb5b07de0149-1575977828752@3c-app-gmx-bs14> (raw)
In-Reply-To: <cover.1575914275.git.landen.chao@mediatek.com>
Hi
thank you for the DSA-driver, works so far, but a bit to improve:
i got some retransmitts on RX (TX looks good)...i guess a clk/pll problem
Iperf3-Client (BPI-R64,192.168.0.19):
root@bpi-r64:~# iperf3 -c 192.168.0.21
Connecting to host 192.168.0.21, port 5201
[ 5] local 192.168.0.19 port 56412 connected to 192.168.0.21 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 114 MBytes 957 Mbits/sec 0 1003 KBytes
[ 5] 1.00-2.00 sec 113 MBytes 944 Mbits/sec 0 1.08 MBytes
[ 5] 2.00-3.00 sec 112 MBytes 941 Mbits/sec 0 1.08 MBytes
[ 5] 3.00-4.00 sec 112 MBytes 941 Mbits/sec 0 1.08 MBytes
[ 5] 4.00-5.00 sec 112 MBytes 942 Mbits/sec 0 1.08 MBytes
[ 5] 5.00-6.00 sec 112 MBytes 944 Mbits/sec 0 1.21 MBytes
[ 5] 6.00-7.00 sec 112 MBytes 944 Mbits/sec 0 1.27 MBytes
[ 5] 7.00-8.00 sec 112 MBytes 943 Mbits/sec 0 1.27 MBytes
[ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec 0 1.27 MBytes
[ 5] 9.00-10.00 sec 112 MBytes 944 Mbits/sec 0 1.27 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.10 GBytes 943 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 1.10 GBytes 941 Mbits/sec receiver
iperf Done.
root@bpi-r64:~# iperf3 -c 192.168.0.21 -R
Connecting to host 192.168.0.21, port 5201
Reverse mode, remote host 192.168.0.21 is sending
[ 5] local 192.168.0.19 port 56420 connected to 192.168.0.21 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec
[ 5] 1.00-2.00 sec 112 MBytes 941 Mbits/sec
[ 5] 2.00-3.00 sec 111 MBytes 933 Mbits/sec
[ 5] 3.00-4.00 sec 112 MBytes 941 Mbits/sec
[ 5] 4.00-5.00 sec 112 MBytes 937 Mbits/sec
[ 5] 5.00-6.00 sec 112 MBytes 941 Mbits/sec
[ 5] 6.00-7.00 sec 111 MBytes 933 Mbits/sec
[ 5] 7.00-8.00 sec 112 MBytes 939 Mbits/sec
[ 5] 8.00-9.00 sec 112 MBytes 936 Mbits/sec
[ 5] 9.00-10.00 sec 112 MBytes 941 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec 605 sender
[ 5] 0.00-10.00 sec 1.09 GBytes 939 Mbits/sec receiver
iperf Done.
Iperf3-Server (my Laptop,192.168.0.21, reverse mode only):
Accepted connection from 192.168.0.19, port 56418
[ 5] local 192.168.0.21 port 5201 connected to 192.168.0.19 port 56420
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 5] 0.00-1.00 sec 115 MBytes 965 Mbits/sec 0 772 KBytes
[ 5] 1.00-2.00 sec 112 MBytes 944 Mbits/sec 0 772 KBytes
[ 5] 2.00-3.00 sec 111 MBytes 933 Mbits/sec 157 643 KBytes
[ 5] 3.00-4.00 sec 112 MBytes 944 Mbits/sec 0 755 KBytes
[ 5] 4.00-5.00 sec 111 MBytes 933 Mbits/sec 141 625 KBytes
[ 5] 5.00-6.00 sec 112 MBytes 944 Mbits/sec 0 740 KBytes
[ 5] 6.00-7.00 sec 111 MBytes 933 Mbits/sec 307 438 KBytes
[ 5] 7.00-8.00 sec 111 MBytes 933 Mbits/sec 0 585 KBytes
[ 5] 8.00-9.00 sec 112 MBytes 944 Mbits/sec 0 700 KBytes
[ 5] 9.00-10.00 sec 112 MBytes 944 Mbits/sec 0 803 KBytes
[ 5] 10.00-10.00 sec 0.00 Bytes 0.00 bits/sec 0 803 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec 605 sender
[ 5] 0.00-10.00 sec 0.00 Bytes 0.00 bits/sec receiver
regards Frank
[1] https://github.com/frank-w/BPI-R2-4.14/tree/5.5-r64-netnext
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2019-12-10 11:38 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-10 8:14 [PATCH net-next 0/6] net-next: dsa: mt7530: add support for MT7531 Landen Chao
2019-12-10 8:14 ` Landen Chao
2019-12-10 8:14 ` [PATCH net-next 1/6] net: dsa: mt7530: Refine message in Kconfig Landen Chao
2019-12-10 8:14 ` Landen Chao
2019-12-12 3:41 ` Florian Fainelli
2019-12-12 3:41 ` Florian Fainelli
2019-12-10 8:14 ` [PATCH net-next 2/6] net: dsa: mt7530: Extend device data ready for adding a new hardware Landen Chao
2019-12-10 8:14 ` Landen Chao
2019-12-12 3:45 ` Florian Fainelli
2019-12-12 3:45 ` Florian Fainelli
2019-12-12 15:03 ` Landen Chao
2019-12-12 15:03 ` Landen Chao
2019-12-12 15:05 ` Landen Chao
2019-12-12 15:05 ` Landen Chao
2019-12-10 8:14 ` [PATCH net-next 3/6] dt-bindings: net: dsa: add new MT7531 binding to support MT7531 Landen Chao
2019-12-10 8:14 ` Landen Chao
2019-12-10 16:20 ` Andrew Lunn
2019-12-10 16:20 ` Andrew Lunn
2019-12-11 14:10 ` Landen Chao
2019-12-11 14:10 ` Landen Chao
2019-12-12 3:46 ` Florian Fainelli
2019-12-12 3:46 ` Florian Fainelli
2019-12-10 8:14 ` [PATCH net-next 4/6] net: dsa: mt7530: Add the support of MT7531 switch Landen Chao
2019-12-10 8:14 ` Landen Chao
2019-12-10 16:35 ` Andrew Lunn
2019-12-10 16:35 ` Andrew Lunn
2019-12-10 17:05 ` Vladimir Oltean
2019-12-10 17:05 ` Vladimir Oltean
2019-12-10 20:33 ` Marek Behun
2019-12-10 20:33 ` Marek Behun
2019-12-10 22:02 ` Andrew Lunn
2019-12-10 22:02 ` Andrew Lunn
2019-12-11 17:35 ` Landen Chao
2019-12-11 17:35 ` Landen Chao
2019-12-10 16:44 ` Andrew Lunn
2019-12-10 16:44 ` Andrew Lunn
2019-12-11 18:18 ` Landen Chao
2019-12-11 18:18 ` Landen Chao
2019-12-11 19:27 ` Andrew Lunn
2019-12-11 19:27 ` Andrew Lunn
2019-12-12 15:04 ` Landen Chao
2019-12-12 15:04 ` Landen Chao
2019-12-10 16:48 ` Andrew Lunn
2019-12-10 16:48 ` Andrew Lunn
2019-12-11 17:48 ` Landen Chao
2019-12-11 17:48 ` Landen Chao
2019-12-12 3:57 ` Florian Fainelli
2019-12-12 3:57 ` Florian Fainelli
2019-12-12 16:24 ` Landen Chao
2019-12-12 16:24 ` Landen Chao
2019-12-10 8:14 ` [PATCH net-next 5/6] arm64: dts: mt7622: add mt7531 dsa to mt7622-rfb1 board Landen Chao
2019-12-10 8:14 ` Landen Chao
2019-12-10 16:51 ` Andrew Lunn
2019-12-10 16:51 ` Andrew Lunn
2019-12-11 18:27 ` Landen Chao
2019-12-11 18:27 ` Landen Chao
2019-12-10 8:14 ` [PATCH net-next 6/6] arm64: dts: mt7622: add mt7531 dsa to bananapi-bpi-r64 board Landen Chao
2019-12-10 8:14 ` Landen Chao
2019-12-10 11:37 ` Frank Wunderlich [this message]
2019-12-10 11:37 ` Aw: [PATCH net-next 0/6] net-next: dsa: mt7530: add support for MT7531 Frank Wunderlich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=trinity-be64e2d4-f70d-4bd8-82aa-fb5b07de0149-1575977828752@3c-app-gmx-bs14 \
--to=frank-w@public-files.de \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=landen.chao@mediatek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=opensource@vdorst.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.