All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v5 1/3] git-credential-store: support multiple credential files
@ 2015-03-24  5:20 Paul Tan
  2015-03-24  5:20 ` [PATCH v5 2/3] git-credential-store: support XDG_CONFIG_HOME Paul Tan
  2015-03-24  5:20 ` [PATCH v5 3/3] t0302: test credential-store support for XDG_CONFIG_HOME Paul Tan
  0 siblings, 2 replies; 11+ messages in thread
From: Paul Tan @ 2015-03-24  5:20 UTC (permalink / raw)
  To: git; +Cc: Junio C Hamano, Jeff King, Matthieu Moy, Eric Sunshine, Paul Tan

Previously, git-credential-store only supported storing credentials in a
single file: ~/.git-credentials. In order to support the XDG base
directory specification[1], git-credential-store needs to be able to
lookup and erase credentials from multiple files, as well as to pick the
appropriate file to write to so that the credentials can be found on
subsequent lookups.

[1] http://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html

Note that some credential storage files may not be owned, readable or
writable by the user, as they may be system-wide files that are meant to
apply to every user.

Instead of a single file path, lookup_credential(), remove_credential()
and store_credential() now take a precedence-ordered string_list of
file paths. lookup_credential() expects both user-specific and
system-wide credential files to be provided to support the use case of
system administrators setting default credentials for users.
remove_credential() and store_credential() expect only the user-specific
credential files to be provided as usually the only config files that
users are allowed to edit are their own user-specific ones.

lookup_credential() will read these (user-specific and system-wide) file
paths in order until it finds the 1st matching credential and print it.
As some files may be private and thus unreadable, any file which cannot
be read will be ignored silently.

remove_credential() will erase credentials from all (user-specific)
files in the list.  This is because if credentials are only erased from
the file with the highest precedence, a matching credential may still be
found in a file further down the list. (Note that due to the lockfile
code, this requires the directory to be writable, which should be so for
user-specific config files)

store_credential() will write the credentials to the first existing
(user-specific) file in the list. If none of the files in the list
exist, store_credential() will write to the filename specified by the
first item of the filename list. For backwards compatibility, this
filename should be "~/.git-credentials".

Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
---

The previous version can be found at [1].

[1] http://thread.gmane.org/gmane.comp.version-control.git/265683

The changes are as follows:

* Fix comment formatting error. Thanks Matthieu.

 credential-store.c | 81 +++++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 56 insertions(+), 25 deletions(-)

diff --git a/credential-store.c b/credential-store.c
index 925d3f4..d700a93 100644
--- a/credential-store.c
+++ b/credential-store.c
@@ -6,7 +6,7 @@
 
 static struct lock_file credential_lock;
 
-static void parse_credential_file(const char *fn,
+static int parse_credential_file(const char *fn,
 				  struct credential *c,
 				  void (*match_cb)(struct credential *),
 				  void (*other_cb)(struct strbuf *))
@@ -14,18 +14,20 @@ static void parse_credential_file(const char *fn,
 	FILE *fh;
 	struct strbuf line = STRBUF_INIT;
 	struct credential entry = CREDENTIAL_INIT;
+	int found_credential = 0;
 
 	fh = fopen(fn, "r");
 	if (!fh) {
-		if (errno != ENOENT)
+		if (errno != ENOENT && errno != EACCES)
 			die_errno("unable to open %s", fn);
-		return;
+		return found_credential;
 	}
 
 	while (strbuf_getline(&line, fh, '\n') != EOF) {
 		credential_from_url(&entry, line.buf);
 		if (entry.username && entry.password &&
 		    credential_match(c, &entry)) {
+			found_credential = 1;
 			if (match_cb) {
 				match_cb(&entry);
 				break;
@@ -38,6 +40,7 @@ static void parse_credential_file(const char *fn,
 	credential_clear(&entry);
 	strbuf_release(&line);
 	fclose(fh);
+	return found_credential;
 }
 
 static void print_entry(struct credential *c)
@@ -64,21 +67,10 @@ static void rewrite_credential_file(const char *fn, struct credential *c,
 		die_errno("unable to commit credential store");
 }
 
-static void store_credential(const char *fn, struct credential *c)
+static void store_credential_file(const char *fn, struct credential *c)
 {
 	struct strbuf buf = STRBUF_INIT;
 
-	/*
-	 * Sanity check that what we are storing is actually sensible.
-	 * In particular, we can't make a URL without a protocol field.
-	 * Without either a host or pathname (depending on the scheme),
-	 * we have no primary key. And without a username and password,
-	 * we are not actually storing a credential.
-	 */
-	if (!c->protocol || !(c->host || c->path) ||
-	    !c->username || !c->password)
-		return;
-
 	strbuf_addf(&buf, "%s://", c->protocol);
 	strbuf_addstr_urlencode(&buf, c->username, 1);
 	strbuf_addch(&buf, ':');
@@ -95,8 +87,37 @@ static void store_credential(const char *fn, struct credential *c)
 	strbuf_release(&buf);
 }
 
-static void remove_credential(const char *fn, struct credential *c)
+static void store_credential(const struct string_list *fns, struct credential *c)
 {
+	struct string_list_item *fn;
+
+	/*
+	 * Sanity check that what we are storing is actually sensible.
+	 * In particular, we can't make a URL without a protocol field.
+	 * Without either a host or pathname (depending on the scheme),
+	 * we have no primary key. And without a username and password,
+	 * we are not actually storing a credential.
+	 */
+	if (!c->protocol || !(c->host || c->path) || !c->username || !c->password)
+		return;
+
+	for_each_string_list_item(fn, fns)
+		if (!access(fn->string, F_OK)) {
+			store_credential_file(fn->string, c);
+			return;
+		}
+	/*
+	 * Write credential to the filename specified by fns->items[0], thus
+	 * creating it
+	 */
+	if (fns->nr)
+		store_credential_file(fns->items[0].string, c);
+}
+
+static void remove_credential(const struct string_list *fns, struct credential *c)
+{
+	struct string_list_item *fn;
+
 	/*
 	 * Sanity check that we actually have something to match
 	 * against. The input we get is a restrictive pattern,
@@ -105,14 +126,20 @@ static void remove_credential(const char *fn, struct credential *c)
 	 * to empty input. So explicitly disallow it, and require that the
 	 * pattern have some actual content to match.
 	 */
-	if (c->protocol || c->host || c->path || c->username)
-		rewrite_credential_file(fn, c, NULL);
+	if (!c->protocol && !c->host && !c->path && !c->username)
+		return;
+	for_each_string_list_item(fn, fns)
+		if (!access(fn->string, F_OK))
+			rewrite_credential_file(fn->string, c, NULL);
 }
 
-static int lookup_credential(const char *fn, struct credential *c)
+static void lookup_credential(const struct string_list *fns, struct credential *c)
 {
-	parse_credential_file(fn, c, print_entry, NULL);
-	return c->username && c->password;
+	struct string_list_item *fn;
+
+	for_each_string_list_item(fn, fns)
+		if (parse_credential_file(fn->string, c, print_entry, NULL))
+			return; /* Found credential */
 }
 
 int main(int argc, char **argv)
@@ -123,6 +150,7 @@ int main(int argc, char **argv)
 	};
 	const char *op;
 	struct credential c = CREDENTIAL_INIT;
+	struct string_list fns = STRING_LIST_INIT_DUP;
 	char *file = NULL;
 	struct option options[] = {
 		OPT_STRING(0, "file", &file, "path",
@@ -139,20 +167,23 @@ int main(int argc, char **argv)
 
 	if (!file)
 		file = expand_user_path("~/.git-credentials");
-	if (!file)
+	if (file)
+		string_list_append(&fns, file);
+	else
 		die("unable to set up default path; use --file");
 
 	if (credential_read(&c, stdin) < 0)
 		die("unable to read credential");
 
 	if (!strcmp(op, "get"))
-		lookup_credential(file, &c);
+		lookup_credential(&fns, &c);
 	else if (!strcmp(op, "erase"))
-		remove_credential(file, &c);
+		remove_credential(&fns, &c);
 	else if (!strcmp(op, "store"))
-		store_credential(file, &c);
+		store_credential(&fns, &c);
 	else
 		; /* Ignore unknown operation. */
 
+	string_list_clear(&fns, 0);
 	return 0;
 }
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2015-03-26 13:28 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-24  5:20 [PATCH v5 1/3] git-credential-store: support multiple credential files Paul Tan
2015-03-24  5:20 ` [PATCH v5 2/3] git-credential-store: support XDG_CONFIG_HOME Paul Tan
2015-03-24  5:20 ` [PATCH v5 3/3] t0302: test credential-store support for XDG_CONFIG_HOME Paul Tan
2015-03-24  9:52   ` Matthieu Moy
2015-03-25  6:54     ` Eric Sunshine
2015-03-25 16:17       ` Junio C Hamano
2015-03-25 20:25         ` Junio C Hamano
2015-03-26  5:20           ` Paul Tan
2015-03-26 13:27             ` Matthieu Moy
2015-03-25  6:42   ` Eric Sunshine
2015-03-25 19:03     ` Johannes Sixt

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.