[Qemu-devel] [PATCH v8 0/6] fsdev: qmp interface for io throttling

[Qemu-devel] [PATCH v8 0/6] fsdev: qmp interface for io throttling

[Pradeep Jagadeesh]

These patches provide the qmp interface, to query the io throttle 
status of the all fsdev devices that are present in a vm.
also, it provides an interface to set the io throttle parameters of a
fsdev to a required value. some of the patches also remove the duplicate
code that was present in block and fsdev files. 

Pradeep Jagadeesh (6):
  throttle: factor out duplicate code
  qmp: Create IOThrottle structure
  throttle: move out function to reuse the code
  hmp: create a throttle initialization function for code reusability
  fsdev: QMP interface for throttling
  fsdev: hmp interface for throttling

 Makefile                        |   4 ++
 blockdev.c                      |  97 ++------------------------------
 fsdev/qemu-fsdev-dummy.c        |  11 ++++
 fsdev/qemu-fsdev-throttle.c     | 120 ++++++++++++++++++++++++++--------------
 fsdev/qemu-fsdev-throttle.h     |   8 ++-
 fsdev/qemu-fsdev.c              |  38 +++++++++++++
 hmp-commands-info.hx            |  18 ++++++
 hmp-commands.hx                 |  19 +++++++
 hmp.c                           |  81 +++++++++++++++++++++++++--
 hmp.h                           |   4 ++
 include/qemu/throttle-options.h |   7 +++
 include/qemu/throttle.h         |   4 +-
 include/qemu/typedefs.h         |   1 +
 monitor.c                       |   5 ++
 qapi-schema.json                |   3 +
 qapi/block-core.json            |  76 +------------------------
 qapi/fsdev.json                 |  84 ++++++++++++++++++++++++++++
 qapi/iothrottle.json            |  88 +++++++++++++++++++++++++++++
 qmp.c                           |  14 +++++
 util/throttle.c                 | 110 ++++++++++++++++++++++++++++++++++++
 20 files changed, 574 insertions(+), 218 deletions(-)
 create mode 100644 qapi/fsdev.json
 create mode 100644 qapi/iothrottle.json

v0 -> v1:
 Addressed comments from Eric Blake, Greg Kurz and Daniel P.Berrange
 Mainly renaming the functions and removing the redundant code.

v1 -> v2:
 Addressed comments from Eric Blake and Greg Kurz.
 As per the suggestion I split the patches into smaller patches.
 Removed some more duplicate code.

v2 -> v3:
 Addresssed comments from Alberto Garcia.
 Changed the comment from block to iothrottle in the iothrottle.json 
 Added the dummy functions in qemu-fsdev-dummy.c to address the compilation
 issues that were observed.

v3 -> v4:
 Addressed comments from Eric Blake and Greg Kurz
 Re-ordered the patches
 Added the dummy functions in qmp.c to address the cross compilation issues

v4 -> v5:
  Addressed comments from Eric Blake and Greg Kurz
  Split the fsdev qmp patch into hmp and qmp related patches
  Moved the common functionalities to throttle.c instead of creating
  a new file

v5 -> v6:
  Addressed comments from Greg Kurz and Markus Armbruster
  Split the commits to specific to hmp and throttle as suggested by Greg
  Moved ThrottleConfig typedef to qemu/typedefs.h
  Addressed compilation issue on FreeBSD by adding flags in qmp.c

v6 -> v7:
  Addressed comments from Albert Garcia and Dr. David Alan Gilbert
  Fixed the hmp-commands-info.hx and hmp-commands.hx as per Dr. David's
  comments.
  Fixed the bug with the hmp fsdev_set_io_throttle and info fsdev_iothrottle  

v7 -> v8:
  Addressed comments from Markus Armbruster and Eric Blake
  Removed unwanted headers from qmp-fsdev-throttle.h
-- 
1.8.3.1

[Qemu-devel] [PATCH V8 1/6] throttle: factor out duplicate code

[Pradeep Jagadeesh]

This patch factor out the duplicate throttle code that was present in
block and fsdev devices.

Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
---
 blockdev.c                      | 44 +----------------------------------
 fsdev/qemu-fsdev-throttle.c     | 44 ++---------------------------------
 include/qemu/throttle-options.h |  4 ++++
 include/qemu/throttle.h         |  4 ++--
 include/qemu/typedefs.h         |  1 +
 util/throttle.c                 | 51 +++++++++++++++++++++++++++++++++++++++++
 6 files changed, 61 insertions(+), 87 deletions(-)

diff --git a/blockdev.c b/blockdev.c
index 02cd69b..780ae58 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -388,49 +388,7 @@ static void extract_common_blockdev_options(QemuOpts *opts, int *bdrv_flags,
     }
 
     if (throttle_cfg) {
-        throttle_config_init(throttle_cfg);
-        throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
-            qemu_opt_get_number(opts, "throttling.bps-total", 0);
-        throttle_cfg->buckets[THROTTLE_BPS_READ].avg  =
-            qemu_opt_get_number(opts, "throttling.bps-read", 0);
-        throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
-            qemu_opt_get_number(opts, "throttling.bps-write", 0);
-        throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
-            qemu_opt_get_number(opts, "throttling.iops-total", 0);
-        throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
-            qemu_opt_get_number(opts, "throttling.iops-read", 0);
-        throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
-            qemu_opt_get_number(opts, "throttling.iops-write", 0);
-
-        throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
-            qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
-        throttle_cfg->buckets[THROTTLE_BPS_READ].max  =
-            qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
-        throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
-            qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
-        throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
-            qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
-        throttle_cfg->buckets[THROTTLE_OPS_READ].max =
-            qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
-        throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
-            qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
-
-        throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
-            qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
-        throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length  =
-            qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
-        throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
-            qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
-        throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
-            qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
-        throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
-            qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
-        throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
-            qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
-
-        throttle_cfg->op_size =
-            qemu_opt_get_number(opts, "throttling.iops-size", 0);
-
+        throttle_parse_options(throttle_cfg, opts);
         if (!throttle_is_valid(throttle_cfg, errp)) {
             return;
         }
diff --git a/fsdev/qemu-fsdev-throttle.c b/fsdev/qemu-fsdev-throttle.c
index 49eebb5..0e6fb86 100644
--- a/fsdev/qemu-fsdev-throttle.c
+++ b/fsdev/qemu-fsdev-throttle.c
@@ -16,6 +16,7 @@
 #include "qemu/error-report.h"
 #include "qemu-fsdev-throttle.h"
 #include "qemu/iov.h"
+#include "qemu/throttle-options.h"
 
 static void fsdev_throttle_read_timer_cb(void *opaque)
 {
@@ -31,48 +32,7 @@ static void fsdev_throttle_write_timer_cb(void *opaque)
 
 void fsdev_throttle_parse_opts(QemuOpts *opts, FsThrottle *fst, Error **errp)
 {
-    throttle_config_init(&fst->cfg);
-    fst->cfg.buckets[THROTTLE_BPS_TOTAL].avg =
-        qemu_opt_get_number(opts, "throttling.bps-total", 0);
-    fst->cfg.buckets[THROTTLE_BPS_READ].avg  =
-        qemu_opt_get_number(opts, "throttling.bps-read", 0);
-    fst->cfg.buckets[THROTTLE_BPS_WRITE].avg =
-        qemu_opt_get_number(opts, "throttling.bps-write", 0);
-    fst->cfg.buckets[THROTTLE_OPS_TOTAL].avg =
-        qemu_opt_get_number(opts, "throttling.iops-total", 0);
-    fst->cfg.buckets[THROTTLE_OPS_READ].avg =
-        qemu_opt_get_number(opts, "throttling.iops-read", 0);
-    fst->cfg.buckets[THROTTLE_OPS_WRITE].avg =
-        qemu_opt_get_number(opts, "throttling.iops-write", 0);
-
-    fst->cfg.buckets[THROTTLE_BPS_TOTAL].max =
-        qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
-    fst->cfg.buckets[THROTTLE_BPS_READ].max  =
-        qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
-    fst->cfg.buckets[THROTTLE_BPS_WRITE].max =
-        qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
-    fst->cfg.buckets[THROTTLE_OPS_TOTAL].max =
-        qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
-    fst->cfg.buckets[THROTTLE_OPS_READ].max =
-        qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
-    fst->cfg.buckets[THROTTLE_OPS_WRITE].max =
-        qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
-
-    fst->cfg.buckets[THROTTLE_BPS_TOTAL].burst_length =
-        qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
-    fst->cfg.buckets[THROTTLE_BPS_READ].burst_length  =
-        qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
-    fst->cfg.buckets[THROTTLE_BPS_WRITE].burst_length =
-        qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
-    fst->cfg.buckets[THROTTLE_OPS_TOTAL].burst_length =
-        qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
-    fst->cfg.buckets[THROTTLE_OPS_READ].burst_length =
-        qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
-    fst->cfg.buckets[THROTTLE_OPS_WRITE].burst_length =
-        qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
-    fst->cfg.op_size =
-        qemu_opt_get_number(opts, "throttling.iops-size", 0);
-
+    throttle_parse_options(&fst->cfg, opts);
     throttle_is_valid(&fst->cfg, errp);
 }
 
diff --git a/include/qemu/throttle-options.h b/include/qemu/throttle-options.h
index 3133d1c..f63d38c 100644
--- a/include/qemu/throttle-options.h
+++ b/include/qemu/throttle-options.h
@@ -10,6 +10,8 @@
 #ifndef THROTTLE_OPTIONS_H
 #define THROTTLE_OPTIONS_H
 
+#include "typedefs.h"
+
 #define THROTTLE_OPTS \
           { \
             .name = "throttling.iops-total",\
@@ -89,4 +91,6 @@
             .help = "when limiting by iops max size of an I/O in bytes",\
         }
 
+void throttle_parse_options(ThrottleConfig *, QemuOpts *);
+
 #endif
diff --git a/include/qemu/throttle.h b/include/qemu/throttle.h
index d056008..75d930c 100644
--- a/include/qemu/throttle.h
+++ b/include/qemu/throttle.h
@@ -89,10 +89,10 @@ typedef struct LeakyBucket {
  * However it allows to keep the code clean and the bucket field is reset to
  * zero at the right time.
  */
-typedef struct ThrottleConfig {
+struct ThrottleConfig {
     LeakyBucket buckets[BUCKETS_COUNT]; /* leaky buckets */
     uint64_t op_size;         /* size of an operation in bytes */
-} ThrottleConfig;
+};
 
 typedef struct ThrottleState {
     ThrottleConfig cfg;       /* configuration */
diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
index 39bc835..90fe0f9 100644
--- a/include/qemu/typedefs.h
+++ b/include/qemu/typedefs.h
@@ -100,6 +100,7 @@ typedef struct uWireSlave uWireSlave;
 typedef struct VirtIODevice VirtIODevice;
 typedef struct Visitor Visitor;
 typedef struct node_info NodeInfo;
+typedef struct ThrottleConfig ThrottleConfig;
 typedef void SaveStateHandler(QEMUFile *f, void *opaque);
 typedef int LoadStateHandler(QEMUFile *f, void *opaque, int version_id);
 
diff --git a/util/throttle.c b/util/throttle.c
index b2a52b8..95c2ecf 100644
--- a/util/throttle.c
+++ b/util/throttle.c
@@ -27,6 +27,7 @@
 #include "qemu/throttle.h"
 #include "qemu/timer.h"
 #include "block/aio.h"
+#include "qemu/throttle-options.h"
 
 /* This function make a bucket leak
  *
@@ -502,3 +503,53 @@ void throttle_account(ThrottleState *ts, bool is_write, uint64_t size)
     }
 }
 
+/* parse the throttle options
+ *
+ * @opts: qemu options
+ * @throttle_cfg: throttle configuration
+ */
+void throttle_parse_options(ThrottleConfig *throttle_cfg, QemuOpts *opts)
+{
+    throttle_config_init(throttle_cfg);
+    throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
+        qemu_opt_get_number(opts, "throttling.bps-total", 0);
+    throttle_cfg->buckets[THROTTLE_BPS_READ].avg  =
+        qemu_opt_get_number(opts, "throttling.bps-read", 0);
+    throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
+        qemu_opt_get_number(opts, "throttling.bps-write", 0);
+    throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
+        qemu_opt_get_number(opts, "throttling.iops-total", 0);
+    throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
+        qemu_opt_get_number(opts, "throttling.iops-read", 0);
+    throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
+        qemu_opt_get_number(opts, "throttling.iops-write", 0);
+
+    throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
+        qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
+    throttle_cfg->buckets[THROTTLE_BPS_READ].max  =
+        qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
+    throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
+        qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
+    throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
+        qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
+    throttle_cfg->buckets[THROTTLE_OPS_READ].max =
+        qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
+    throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
+        qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
+
+    throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
+        qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
+    throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length  =
+        qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
+    throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
+        qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
+    throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
+        qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
+    throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
+        qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
+    throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
+        qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
+
+    throttle_cfg->op_size =
+        qemu_opt_get_number(opts, "throttling.iops-size", 0);
+}
-- 
1.8.3.1

[Qemu-devel] [PATCH V8 2/6] qmp: Create IOThrottle structure

[Pradeep Jagadeesh]

This patch enables qmp interfaces for the fsdev
devices. This provides two interfaces one
for querying info of all the fsdev devices. The second one
to set the IO limits for the required fsdev device.

Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
---
 qapi/block-core.json | 76 ++-------------------------------------------
 qapi/iothrottle.json | 88 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 91 insertions(+), 73 deletions(-)
 create mode 100644 qapi/iothrottle.json

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 833c602..98147ef 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -6,6 +6,7 @@
 
 # QAPI common definitions
 { 'include': 'common.json' }
+{ 'include': 'iothrottle.json' }
 
 ##
 # @SnapshotInfo:
@@ -1825,84 +1826,13 @@
 #
 # @device: Block device name (deprecated, use @id instead)
 #
-# @id: The name or QOM path of the guest device (since: 2.8)
-#
-# @bps: total throughput limit in bytes per second
-#
-# @bps_rd: read throughput limit in bytes per second
-#
-# @bps_wr: write throughput limit in bytes per second
-#
-# @iops: total I/O operations per second
-#
-# @iops_rd: read I/O operations per second
-#
-# @iops_wr: write I/O operations per second
-#
-# @bps_max: total throughput limit during bursts,
-#                     in bytes (Since 1.7)
-#
-# @bps_rd_max: read throughput limit during bursts,
-#                        in bytes (Since 1.7)
-#
-# @bps_wr_max: write throughput limit during bursts,
-#                        in bytes (Since 1.7)
-#
-# @iops_max: total I/O operations per second during bursts,
-#                      in bytes (Since 1.7)
-#
-# @iops_rd_max: read I/O operations per second during bursts,
-#                         in bytes (Since 1.7)
-#
-# @iops_wr_max: write I/O operations per second during bursts,
-#                         in bytes (Since 1.7)
-#
-# @bps_max_length: maximum length of the @bps_max burst
-#                            period, in seconds. It must only
-#                            be set if @bps_max is set as well.
-#                            Defaults to 1. (Since 2.6)
-#
-# @bps_rd_max_length: maximum length of the @bps_rd_max
-#                               burst period, in seconds. It must only
-#                               be set if @bps_rd_max is set as well.
-#                               Defaults to 1. (Since 2.6)
-#
-# @bps_wr_max_length: maximum length of the @bps_wr_max
-#                               burst period, in seconds. It must only
-#                               be set if @bps_wr_max is set as well.
-#                               Defaults to 1. (Since 2.6)
-#
-# @iops_max_length: maximum length of the @iops burst
-#                             period, in seconds. It must only
-#                             be set if @iops_max is set as well.
-#                             Defaults to 1. (Since 2.6)
-#
-# @iops_rd_max_length: maximum length of the @iops_rd_max
-#                                burst period, in seconds. It must only
-#                                be set if @iops_rd_max is set as well.
-#                                Defaults to 1. (Since 2.6)
-#
-# @iops_wr_max_length: maximum length of the @iops_wr_max
-#                                burst period, in seconds. It must only
-#                                be set if @iops_wr_max is set as well.
-#                                Defaults to 1. (Since 2.6)
-#
-# @iops_size: an I/O size in bytes (Since 1.7)
-#
 # @group: throttle group name (Since 2.4)
 #
 # Since: 1.1
 ##
 { 'struct': 'BlockIOThrottle',
-  'data': { '*device': 'str', '*id': 'str', 'bps': 'int', 'bps_rd': 'int',
-            'bps_wr': 'int', 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
-            '*bps_max': 'int', '*bps_rd_max': 'int',
-            '*bps_wr_max': 'int', '*iops_max': 'int',
-            '*iops_rd_max': 'int', '*iops_wr_max': 'int',
-            '*bps_max_length': 'int', '*bps_rd_max_length': 'int',
-            '*bps_wr_max_length': 'int', '*iops_max_length': 'int',
-            '*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int',
-            '*iops_size': 'int', '*group': 'str' } }
+  'base': 'IOThrottle',
+  'data': { '*device': 'str', '*group': 'str' } }
 
 ##
 # @block-stream:
diff --git a/qapi/iothrottle.json b/qapi/iothrottle.json
new file mode 100644
index 0000000..0f067c3
--- /dev/null
+++ b/qapi/iothrottle.json
@@ -0,0 +1,88 @@
+# -*- Mode: Python -*-
+
+##
+# == QAPI IOThrottle definitions
+##
+
+##
+# @IOThrottle:
+#
+# A set of parameters describing IO throttling
+#
+# @id: The name or QOM path of the guest device (since: 2.8)
+#
+# @bps: total throughput limit in bytes per second
+#
+# @bps_rd: read throughput limit in bytes per second
+#
+# @bps_wr: write throughput limit in bytes per second
+#
+# @iops: total I/O operations per second
+#
+# @iops_rd: read I/O operations per second
+#
+# @iops_wr: write I/O operations per second
+#
+# @bps_max: total throughput limit during bursts,
+#                     in bytes (Since 1.7)
+#
+# @bps_rd_max: read throughput limit during bursts,
+#                        in bytes (Since 1.7)
+#
+# @bps_wr_max: write throughput limit during bursts,
+#                        in bytes (Since 1.7)
+#
+# @iops_max: total I/O operations per second during bursts,
+#                      in bytes (Since 1.7)
+#
+# @iops_rd_max: read I/O operations per second during bursts,
+#                         in bytes (Since 1.7)
+#
+# @iops_wr_max: write I/O operations per second during bursts,
+#                         in bytes (Since 1.7)
+#
+# @bps_max_length: maximum length of the @bps_max burst
+#                            period, in seconds. It must only
+#                            be set if @bps_max is set as well.
+#                            Defaults to 1. (Since 2.6)
+#
+# @bps_rd_max_length: maximum length of the @bps_rd_max
+#                               burst period, in seconds. It must only
+#                               be set if @bps_rd_max is set as well.
+#                               Defaults to 1. (Since 2.6)
+#
+# @bps_wr_max_length: maximum length of the @bps_wr_max
+#                               burst period, in seconds. It must only
+#                               be set if @bps_wr_max is set as well.
+#                               Defaults to 1. (Since 2.6)
+#
+# @iops_max_length: maximum length of the @iops burst
+#                             period, in seconds. It must only
+#                             be set if @iops_max is set as well.
+#                             Defaults to 1. (Since 2.6)
+#
+# @iops_rd_max_length: maximum length of the @iops_rd_max
+#                                burst period, in seconds. It must only
+#                                be set if @iops_rd_max is set as well.
+#                                Defaults to 1. (Since 2.6)
+#
+# @iops_wr_max_length: maximum length of the @iops_wr_max
+#                                burst period, in seconds. It must only
+#                                be set if @iops_wr_max is set as well.
+#                                Defaults to 1. (Since 2.6)
+#
+# @iops_size: an I/O size in bytes (Since 1.7)
+#
+#
+# Since: 2.10
+##
+{ 'struct': 'IOThrottle',
+  'data': { '*id': 'str', 'bps': 'int', 'bps_rd': 'int',
+            'bps_wr': 'int', 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
+            '*bps_max': 'int', '*bps_rd_max': 'int',
+            '*bps_wr_max': 'int', '*iops_max': 'int',
+            '*iops_rd_max': 'int', '*iops_wr_max': 'int',
+            '*bps_max_length': 'int', '*bps_rd_max_length': 'int',
+            '*bps_wr_max_length': 'int', '*iops_max_length': 'int',
+            '*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int',
+            '*iops_size': 'int' } }
-- 
1.8.3.1

[Qemu-devel] [PATCH V8 3/6] throttle: move out function to reuse the code

[Pradeep Jagadeesh]

This patch move out the throttle code to util/throttle.c to maximize
the reusability of the code.The same code is also used by fsdev.

Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
---
 blockdev.c                      | 53 +++---------------------------------
 include/qemu/throttle-options.h |  3 +++
 util/throttle.c                 | 59 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 65 insertions(+), 50 deletions(-)

diff --git a/blockdev.c b/blockdev.c
index 780ae58..1caf2e0 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -2571,6 +2571,7 @@ void qmp_block_set_io_throttle(BlockIOThrottle *arg, Error **errp)
     BlockDriverState *bs;
     BlockBackend *blk;
     AioContext *aio_context;
+    IOThrottle *iothrottle;
 
     blk = qmp_get_blk(arg->has_device ? arg->device : NULL,
                       arg->has_id ? arg->id : NULL,
@@ -2588,56 +2589,8 @@ void qmp_block_set_io_throttle(BlockIOThrottle *arg, Error **errp)
         goto out;
     }
 
-    throttle_config_init(&cfg);
-    cfg.buckets[THROTTLE_BPS_TOTAL].avg = arg->bps;
-    cfg.buckets[THROTTLE_BPS_READ].avg  = arg->bps_rd;
-    cfg.buckets[THROTTLE_BPS_WRITE].avg = arg->bps_wr;
-
-    cfg.buckets[THROTTLE_OPS_TOTAL].avg = arg->iops;
-    cfg.buckets[THROTTLE_OPS_READ].avg  = arg->iops_rd;
-    cfg.buckets[THROTTLE_OPS_WRITE].avg = arg->iops_wr;
-
-    if (arg->has_bps_max) {
-        cfg.buckets[THROTTLE_BPS_TOTAL].max = arg->bps_max;
-    }
-    if (arg->has_bps_rd_max) {
-        cfg.buckets[THROTTLE_BPS_READ].max = arg->bps_rd_max;
-    }
-    if (arg->has_bps_wr_max) {
-        cfg.buckets[THROTTLE_BPS_WRITE].max = arg->bps_wr_max;
-    }
-    if (arg->has_iops_max) {
-        cfg.buckets[THROTTLE_OPS_TOTAL].max = arg->iops_max;
-    }
-    if (arg->has_iops_rd_max) {
-        cfg.buckets[THROTTLE_OPS_READ].max = arg->iops_rd_max;
-    }
-    if (arg->has_iops_wr_max) {
-        cfg.buckets[THROTTLE_OPS_WRITE].max = arg->iops_wr_max;
-    }
-
-    if (arg->has_bps_max_length) {
-        cfg.buckets[THROTTLE_BPS_TOTAL].burst_length = arg->bps_max_length;
-    }
-    if (arg->has_bps_rd_max_length) {
-        cfg.buckets[THROTTLE_BPS_READ].burst_length = arg->bps_rd_max_length;
-    }
-    if (arg->has_bps_wr_max_length) {
-        cfg.buckets[THROTTLE_BPS_WRITE].burst_length = arg->bps_wr_max_length;
-    }
-    if (arg->has_iops_max_length) {
-        cfg.buckets[THROTTLE_OPS_TOTAL].burst_length = arg->iops_max_length;
-    }
-    if (arg->has_iops_rd_max_length) {
-        cfg.buckets[THROTTLE_OPS_READ].burst_length = arg->iops_rd_max_length;
-    }
-    if (arg->has_iops_wr_max_length) {
-        cfg.buckets[THROTTLE_OPS_WRITE].burst_length = arg->iops_wr_max_length;
-    }
-
-    if (arg->has_iops_size) {
-        cfg.op_size = arg->iops_size;
-    }
+    iothrottle = qapi_BlockIOThrottle_base(arg);
+    throttle_set_io_limits(&cfg, iothrottle);
 
     if (!throttle_is_valid(&cfg, errp)) {
         goto out;
diff --git a/include/qemu/throttle-options.h b/include/qemu/throttle-options.h
index f63d38c..a9deb8e 100644
--- a/include/qemu/throttle-options.h
+++ b/include/qemu/throttle-options.h
@@ -11,6 +11,7 @@
 #define THROTTLE_OPTIONS_H
 
 #include "typedefs.h"
+#include "qapi-types.h"
 
 #define THROTTLE_OPTS \
           { \
@@ -93,4 +94,6 @@
 
 void throttle_parse_options(ThrottleConfig *, QemuOpts *);
 
+void throttle_set_io_limits(ThrottleConfig *, IOThrottle *);
+
 #endif
diff --git a/util/throttle.c b/util/throttle.c
index 95c2ecf..2d00532 100644
--- a/util/throttle.c
+++ b/util/throttle.c
@@ -553,3 +553,62 @@ void throttle_parse_options(ThrottleConfig *throttle_cfg, QemuOpts *opts)
     throttle_cfg->op_size =
         qemu_opt_get_number(opts, "throttling.iops-size", 0);
 }
+
+/* set the throttle limits
+ *
+ * @arg: iothrottle limits
+ * @cfg: throttle configuration
+ */
+void throttle_set_io_limits(ThrottleConfig *cfg, IOThrottle *arg)
+{
+    throttle_config_init(cfg);
+    cfg->buckets[THROTTLE_BPS_TOTAL].avg = arg->bps;
+    cfg->buckets[THROTTLE_BPS_READ].avg  = arg->bps_rd;
+    cfg->buckets[THROTTLE_BPS_WRITE].avg = arg->bps_wr;
+
+    cfg->buckets[THROTTLE_OPS_TOTAL].avg = arg->iops;
+    cfg->buckets[THROTTLE_OPS_READ].avg  = arg->iops_rd;
+    cfg->buckets[THROTTLE_OPS_WRITE].avg = arg->iops_wr;
+
+    if (arg->has_bps_max) {
+        cfg->buckets[THROTTLE_BPS_TOTAL].max = arg->bps_max;
+    }
+    if (arg->has_bps_rd_max) {
+        cfg->buckets[THROTTLE_BPS_READ].max = arg->bps_rd_max;
+    }
+    if (arg->has_bps_wr_max) {
+        cfg->buckets[THROTTLE_BPS_WRITE].max = arg->bps_wr_max;
+    }
+    if (arg->has_iops_max) {
+        cfg->buckets[THROTTLE_OPS_TOTAL].max = arg->iops_max;
+    }
+    if (arg->has_iops_rd_max) {
+        cfg->buckets[THROTTLE_OPS_READ].max = arg->iops_rd_max;
+    }
+    if (arg->has_iops_wr_max) {
+        cfg->buckets[THROTTLE_OPS_WRITE].max = arg->iops_wr_max;
+    }
+
+    if (arg->has_bps_max_length) {
+        cfg->buckets[THROTTLE_BPS_TOTAL].burst_length = arg->bps_max_length;
+    }
+    if (arg->has_bps_rd_max_length) {
+        cfg->buckets[THROTTLE_BPS_READ].burst_length = arg->bps_rd_max_length;
+    }
+    if (arg->has_bps_wr_max_length) {
+        cfg->buckets[THROTTLE_BPS_WRITE].burst_length = arg->bps_wr_max_length;
+    }
+    if (arg->has_iops_max_length) {
+        cfg->buckets[THROTTLE_OPS_TOTAL].burst_length = arg->iops_max_length;
+    }
+    if (arg->has_iops_rd_max_length) {
+        cfg->buckets[THROTTLE_OPS_READ].burst_length = arg->iops_rd_max_length;
+    }
+    if (arg->has_iops_wr_max_length) {
+        cfg->buckets[THROTTLE_OPS_WRITE].burst_length = arg->iops_wr_max_length;
+    }
+
+    if (arg->has_iops_size) {
+        cfg->op_size = arg->iops_size;
+    }
+}
-- 
1.8.3.1

[Qemu-devel] [PATCH V8 4/6] hmp: create a throttle initialization function for code reusability

[Pradeep Jagadeesh]

This patch creates a throttle initialization function to maximize the
code reusability. The same code is also used by fsdev.

Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
---
 hmp.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/hmp.c b/hmp.c
index fd80dce..2dbfb80 100644
--- a/hmp.c
+++ b/hmp.c
@@ -1758,20 +1758,27 @@ void hmp_change(Monitor *mon, const QDict *qdict)
     hmp_handle_error(mon, &err);
 }
 
+static void hmp_initialize_io_throttle(IOThrottle *iot, const QDict *qdict)
+{
+    iot->bps = qdict_get_int(qdict, "bps");
+    iot->bps_rd = qdict_get_int(qdict, "bps_rd");
+    iot->bps_wr = qdict_get_int(qdict, "bps_wr");
+    iot->iops = qdict_get_int(qdict, "iops");
+    iot->iops_rd = qdict_get_int(qdict, "iops_rd");
+    iot->iops_wr = qdict_get_int(qdict, "iops_wr");
+}
+
 void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict)
 {
     Error *err = NULL;
+    IOThrottle *iothrottle;
     BlockIOThrottle throttle = {
         .has_device = true,
         .device = (char *) qdict_get_str(qdict, "device"),
-        .bps = qdict_get_int(qdict, "bps"),
-        .bps_rd = qdict_get_int(qdict, "bps_rd"),
-        .bps_wr = qdict_get_int(qdict, "bps_wr"),
-        .iops = qdict_get_int(qdict, "iops"),
-        .iops_rd = qdict_get_int(qdict, "iops_rd"),
-        .iops_wr = qdict_get_int(qdict, "iops_wr"),
     };
 
+    iothrottle = qapi_BlockIOThrottle_base(&throttle);
+    hmp_initialize_io_throttle(iothrottle, qdict);
     qmp_block_set_io_throttle(&throttle, &err);
     hmp_handle_error(mon, &err);
 }
-- 
1.8.3.1

[Qemu-devel] [PATCH V8 5/6] fsdev: QMP interface for throttling

[Pradeep Jagadeesh]

This patch introduces qmp interfaces for the fsdev
devices. This provides two interfaces one
for querying info of all the fsdev devices. The second one
to set the IO limits for the required fsdev device.

Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
---
 Makefile                    |  4 +++
 fsdev/qemu-fsdev-dummy.c    | 11 ++++++
 fsdev/qemu-fsdev-throttle.c | 76 ++++++++++++++++++++++++++++++++++++++++
 fsdev/qemu-fsdev-throttle.h |  8 +++--
 fsdev/qemu-fsdev.c          | 38 ++++++++++++++++++++
 monitor.c                   |  5 +++
 qapi-schema.json            |  3 ++
 qapi/fsdev.json             | 84 +++++++++++++++++++++++++++++++++++++++++++++
 qmp.c                       | 14 ++++++++
 9 files changed, 241 insertions(+), 2 deletions(-)
 create mode 100644 qapi/fsdev.json

diff --git a/Makefile b/Makefile
index 97a58a0..5af92cb 100644
--- a/Makefile
+++ b/Makefile
@@ -416,6 +416,10 @@ qapi-modules = $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/qapi/common.json \
                $(SRC_PATH)/qapi/crypto.json $(SRC_PATH)/qapi/rocker.json \
                $(SRC_PATH)/qapi/trace.json
 
+ifdef CONFIG_VIRTFS
+qapi-modules += $(SRC_PATH)/qapi/fsdev.json
+endif
+
 qapi-types.c qapi-types.h :\
 $(qapi-modules) $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)
 	$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py \
diff --git a/fsdev/qemu-fsdev-dummy.c b/fsdev/qemu-fsdev-dummy.c
index 6dc0fbc..28c82d2 100644
--- a/fsdev/qemu-fsdev-dummy.c
+++ b/fsdev/qemu-fsdev-dummy.c
@@ -14,8 +14,19 @@
 #include "qemu-fsdev.h"
 #include "qemu/config-file.h"
 #include "qemu/module.h"
+#include "qmp-commands.h"
 
 int qemu_fsdev_add(QemuOpts *opts)
 {
     return 0;
 }
+
+void qmp_fsdev_set_io_throttle(IOThrottle *arg, Error **errp)
+{
+    return;
+}
+
+IOThrottleList *qmp_query_fsdev_io_throttle(Error **errp)
+{
+    return NULL;
+}
diff --git a/fsdev/qemu-fsdev-throttle.c b/fsdev/qemu-fsdev-throttle.c
index 0e6fb86..184ed4c 100644
--- a/fsdev/qemu-fsdev-throttle.c
+++ b/fsdev/qemu-fsdev-throttle.c
@@ -16,6 +16,7 @@
 #include "qemu/error-report.h"
 #include "qemu-fsdev-throttle.h"
 #include "qemu/iov.h"
+#include "qemu/main-loop.h"
 #include "qemu/throttle-options.h"
 
 static void fsdev_throttle_read_timer_cb(void *opaque)
@@ -30,6 +31,81 @@ static void fsdev_throttle_write_timer_cb(void *opaque)
     qemu_co_enter_next(&fst->throttled_reqs[true]);
 }
 
+void fsdev_set_io_throttle(IOThrottle *arg, FsThrottle *fst, Error **errp)
+{
+    ThrottleConfig cfg;
+
+    throttle_set_io_limits(&cfg, arg);
+
+    if (throttle_is_valid(&cfg, errp)) {
+        fst->cfg = cfg;
+        fsdev_throttle_init(fst);
+    }
+}
+
+void fsdev_get_io_throttle(FsThrottle *fst, IOThrottle **fs9pcfg,
+                           char *fsdevice, Error **errp)
+{
+
+    ThrottleConfig cfg = fst->cfg;
+    IOThrottle *fscfg = g_malloc0(sizeof(*fscfg));
+
+    fscfg->has_id = true;
+    fscfg->id = g_strdup(fsdevice);
+    fscfg->bps = cfg.buckets[THROTTLE_BPS_TOTAL].avg;
+    fscfg->bps_rd = cfg.buckets[THROTTLE_BPS_READ].avg;
+    fscfg->bps_wr = cfg.buckets[THROTTLE_BPS_WRITE].avg;
+
+    fscfg->iops = cfg.buckets[THROTTLE_OPS_TOTAL].avg;
+    fscfg->iops_rd = cfg.buckets[THROTTLE_OPS_READ].avg;
+    fscfg->iops_wr = cfg.buckets[THROTTLE_OPS_WRITE].avg;
+
+    fscfg->has_bps_max     = cfg.buckets[THROTTLE_BPS_TOTAL].max;
+    fscfg->bps_max         = cfg.buckets[THROTTLE_BPS_TOTAL].max;
+    fscfg->has_bps_rd_max  = cfg.buckets[THROTTLE_BPS_READ].max;
+    fscfg->bps_rd_max      = cfg.buckets[THROTTLE_BPS_READ].max;
+    fscfg->has_bps_wr_max  = cfg.buckets[THROTTLE_BPS_WRITE].max;
+    fscfg->bps_wr_max      = cfg.buckets[THROTTLE_BPS_WRITE].max;
+
+    fscfg->has_iops_max    = cfg.buckets[THROTTLE_OPS_TOTAL].max;
+    fscfg->iops_max        = cfg.buckets[THROTTLE_OPS_TOTAL].max;
+    fscfg->has_iops_rd_max = cfg.buckets[THROTTLE_OPS_READ].max;
+    fscfg->iops_rd_max     = cfg.buckets[THROTTLE_OPS_READ].max;
+    fscfg->has_iops_wr_max = cfg.buckets[THROTTLE_OPS_WRITE].max;
+    fscfg->iops_wr_max     = cfg.buckets[THROTTLE_OPS_WRITE].max;
+
+    fscfg->has_bps_max_length     = fscfg->has_bps_max;
+    fscfg->bps_max_length         =
+         cfg.buckets[THROTTLE_BPS_TOTAL].burst_length;
+    fscfg->has_bps_rd_max_length  = fscfg->has_bps_rd_max;
+    fscfg->bps_rd_max_length      =
+         cfg.buckets[THROTTLE_BPS_READ].burst_length;
+    fscfg->has_bps_wr_max_length  = fscfg->has_bps_wr_max;
+    fscfg->bps_wr_max_length      =
+         cfg.buckets[THROTTLE_BPS_WRITE].burst_length;
+
+    fscfg->has_iops_max_length    = fscfg->has_iops_max;
+    fscfg->iops_max_length        =
+         cfg.buckets[THROTTLE_OPS_TOTAL].burst_length;
+    fscfg->has_iops_rd_max_length = fscfg->has_iops_rd_max;
+    fscfg->iops_rd_max_length     =
+         cfg.buckets[THROTTLE_OPS_READ].burst_length;
+    fscfg->has_iops_wr_max_length = fscfg->has_iops_wr_max;
+    fscfg->iops_wr_max_length     =
+         cfg.buckets[THROTTLE_OPS_WRITE].burst_length;
+
+    fscfg->bps_max_length = cfg.buckets[THROTTLE_BPS_TOTAL].burst_length;
+    fscfg->bps_rd_max_length = cfg.buckets[THROTTLE_BPS_READ].burst_length;
+    fscfg->bps_wr_max_length = cfg.buckets[THROTTLE_BPS_WRITE].burst_length;
+    fscfg->iops_max_length = cfg.buckets[THROTTLE_OPS_TOTAL].burst_length;
+    fscfg->iops_rd_max_length = cfg.buckets[THROTTLE_OPS_READ].burst_length;
+    fscfg->iops_wr_max_length = cfg.buckets[THROTTLE_OPS_WRITE].burst_length;
+
+    fscfg->iops_size = cfg.op_size;
+
+    *fs9pcfg = fscfg;
+}
+
 void fsdev_throttle_parse_opts(QemuOpts *opts, FsThrottle *fst, Error **errp)
 {
     throttle_parse_options(&fst->cfg, opts);
diff --git a/fsdev/qemu-fsdev-throttle.h b/fsdev/qemu-fsdev-throttle.h
index e418643..1db9125 100644
--- a/fsdev/qemu-fsdev-throttle.h
+++ b/fsdev/qemu-fsdev-throttle.h
@@ -15,8 +15,6 @@
 #ifndef _FSDEV_THROTTLE_H
 #define _FSDEV_THROTTLE_H
 
-#include "block/aio.h"
-#include "qemu/main-loop.h"
 #include "qemu/coroutine.h"
 #include "qapi/error.h"
 #include "qemu/throttle.h"
@@ -36,4 +34,10 @@ void coroutine_fn fsdev_co_throttle_request(FsThrottle *, bool ,
                                             struct iovec *, int);
 
 void fsdev_throttle_cleanup(FsThrottle *);
+
+void fsdev_set_io_throttle(IOThrottle *, FsThrottle *, Error **errp);
+
+void fsdev_get_io_throttle(FsThrottle *, IOThrottle **iothp,
+                           char *, Error **errp);
+
 #endif /* _FSDEV_THROTTLE_H */
diff --git a/fsdev/qemu-fsdev.c b/fsdev/qemu-fsdev.c
index 266e442..63dc1b5 100644
--- a/fsdev/qemu-fsdev.c
+++ b/fsdev/qemu-fsdev.c
@@ -16,6 +16,7 @@
 #include "qemu-common.h"
 #include "qemu/config-file.h"
 #include "qemu/error-report.h"
+#include "qmp-commands.h"
 
 static QTAILQ_HEAD(FsDriverEntry_head, FsDriverListEntry) fsdriver_entries =
     QTAILQ_HEAD_INITIALIZER(fsdriver_entries);
@@ -98,3 +99,40 @@ FsDriverEntry *get_fsdev_fsentry(char *id)
     }
     return NULL;
 }
+
+void qmp_fsdev_set_io_throttle(IOThrottle *arg, Error **errp)
+{
+
+    FsDriverEntry *fse;
+
+    fse = get_fsdev_fsentry(arg->has_id ? arg->id : NULL);
+    if (!fse) {
+        error_setg(errp, "Not a valid fsdev device");
+        return;
+    }
+
+    fsdev_set_io_throttle(arg, &fse->fst, errp);
+}
+
+IOThrottleList *qmp_query_fsdev_io_throttle(Error **errp)
+{
+    IOThrottleList *head = NULL, *p_next;
+    struct FsDriverListEntry *fsle;
+    Error *local_err = NULL;
+
+    QTAILQ_FOREACH(fsle, &fsdriver_entries, next) {
+        p_next = g_new0(IOThrottleList, 1);
+        fsdev_get_io_throttle(&fsle->fse.fst, &p_next->value,
+                              fsle->fse.fsdev_id, &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            g_free(p_next);
+            qapi_free_IOThrottleList(head);
+            return NULL;
+        }
+
+        p_next->next = head;
+        head = p_next;
+    }
+    return head;
+}
diff --git a/monitor.c b/monitor.c
index e0f8801..eebda1c 100644
--- a/monitor.c
+++ b/monitor.c
@@ -998,6 +998,11 @@ static void qmp_unregister_commands_hack(void)
     && !defined(TARGET_S390X)
     qmp_unregister_command(&qmp_commands, "query-cpu-definitions");
 #endif
+#ifndef CONFIG_VIRTFS
+    qmp_unregister_command(&qmp_commands, "fsdev-set-io-throttle");
+    qmp_unregister_command(&qmp_commands, "query-fsdev-io-throttle");
+#endif
+
 }
 
 void monitor_init_qmp_commands(void)
diff --git a/qapi-schema.json b/qapi-schema.json
index 802ea53..8cf8140 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -81,6 +81,9 @@
 # QAPI block definitions
 { 'include': 'qapi/block.json' }
 
+# QAPI fsdev definitions
+{ 'include': 'qapi/fsdev.json' }
+
 # QAPI event definitions
 { 'include': 'qapi/event.json' }
 
diff --git a/qapi/fsdev.json b/qapi/fsdev.json
new file mode 100644
index 0000000..48020fb
--- /dev/null
+++ b/qapi/fsdev.json
@@ -0,0 +1,84 @@
+# -*- Mode: Python -*-
+
+##
+# == QAPI fsdev definitions
+##
+
+# QAPI common definitions
+{ 'include': 'iothrottle.json' }
+
+##
+# @fsdev-set-io-throttle:
+#
+# Change I/O limits for a 9p/fsdev device.
+#
+# I/O limits can be enabled by setting throttle value to non-zero number.
+#
+# I/O limits can be disabled by setting all throttle values to 0.
+#
+# Returns: Nothing on success
+#          If @device is not a valid fsdev device, GenericError
+#
+# Since: 2.10
+#
+# Example:
+#
+# -> { "execute": "fsdev-set-io-throttle",
+#      "arguments": { "id": "id0-1-0",
+#                     "bps": 1000000,
+#                     "bps_rd": 0,
+#                     "bps_wr": 0,
+#                     "iops": 0,
+#                     "iops_rd": 0,
+#                     "iops_wr": 0,
+#                     "bps_max": 8000000,
+#                     "bps_rd_max": 0,
+#                     "bps_wr_max": 0,
+#                     "iops_max": 0,
+#                     "iops_rd_max": 0,
+#                     "iops_wr_max": 0,
+#                     "bps_max_length": 60,
+#                     "iops_size": 0 } }
+# <- { "returns": {} }
+##
+{ 'command': 'fsdev-set-io-throttle', 'boxed': true,
+  'data': 'IOThrottle' }
+##
+# @query-fsdev-io-throttle:
+#
+# Returns: a list of @IOThrottle describing I/O throttle
+#          values of each fsdev device
+#
+# Since: 2.10
+#
+# Example:
+#
+# -> { "Execute": "query-fsdev-io-throttle" }
+# <- { "returns" : [
+#          {
+#              "id": "id0-hd0",
+#              "bps":1000000,
+#              "bps_rd":0,
+#              "bps_wr":0,
+#              "iops":1000000,
+#              "iops_rd":0,
+#              "iops_wr":0,
+#              "bps_max": 8000000,
+#              "bps_rd_max": 0,
+#              "bps_wr_max": 0,
+#              "iops_max": 0,
+#              "iops_rd_max": 0,
+#              "iops_wr_max": 0,
+#              "bps_max_length": 0,
+#              "bps_rd_max_length": 0,
+#              "bps_wr_max_length": 0,
+#              "iops_max_length": 0,
+#              "iops_rd_max_length": 0,
+#              "iops_wr_max_length": 0,
+#              "iops_size": 0
+#            }
+#          ]
+#      }
+#
+##
+{ 'command': 'query-fsdev-io-throttle', 'returns': [ 'IOThrottle' ] }
diff --git a/qmp.c b/qmp.c
index b86201e..eed91e5 100644
--- a/qmp.c
+++ b/qmp.c
@@ -130,6 +130,20 @@ void qmp_cpu_add(int64_t id, Error **errp)
     }
 }
 
+#if defined(_WIN64) || defined(_WIN32) || defined(__FreeBSD__)
+
+void qmp_fsdev_set_io_throttle(IOThrottle *arg, Error **errp)
+{
+    return;
+}
+
+IOThrottleList *qmp_query_fsdev_io_throttle(Error **errp)
+{
+    return NULL;
+}
+
+#endif
+
 #ifndef CONFIG_VNC
 /* If VNC support is enabled, the "true" query-vnc command is
    defined in the VNC subsystem */
-- 
1.8.3.1

[Qemu-devel] [PATCH V8 6/6] fsdev: hmp interface for throttling

[Pradeep Jagadeesh]

This patch introduces hmp interfaces for the fsdev
devices.

Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
---
 hmp-commands-info.hx | 18 +++++++++++++++
 hmp-commands.hx      | 19 ++++++++++++++++
 hmp.c                | 62 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 hmp.h                |  4 ++++
 4 files changed, 103 insertions(+)

diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
index d9df238..07ed338 100644
--- a/hmp-commands-info.hx
+++ b/hmp-commands-info.hx
@@ -84,6 +84,24 @@ STEXI
 Show block device statistics.
 ETEXI
 
+#if defined(CONFIG_VIRTFS)
+
+    {
+        .name       = "fsdev_iothrottle",
+        .args_type  = "",
+        .params     = "",
+        .help       = "show fsdev iothrottle information",
+        .cmd        = hmp_info_fsdev_iothrottle,
+    },
+
+#endif
+
+STEXI
+@item info fsdev_iothrottle
+@findex fsdev_iothrottle
+Show fsdev device throttle info.
+ETEXI
+
     {
         .name       = "block-jobs",
         .args_type  = "",
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 1941e19..aef9f79 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1680,6 +1680,25 @@ STEXI
 Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
 ETEXI
 
+#if defined(CONFIG_VIRTFS)
+
+    {
+        .name       = "fsdev_set_io_throttle",
+        .args_type  = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
+        .params     = "device bps bps_rd bps_wr iops iops_rd iops_wr",
+        .help       = "change I/O throttle limits for a fs devices",
+        .cmd        = hmp_fsdev_set_io_throttle,
+    },
+
+#endif
+
+STEXI
+@item fsdev_set_io_throttle @var{device} @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
+@findex fsdev_set_io_throttle
+Change I/O throttle limits for a fs devices to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
+ETEXI
+
+
     {
         .name       = "set_password",
         .args_type  = "protocol:s,password:s,connected:s?",
diff --git a/hmp.c b/hmp.c
index 2dbfb80..712c6a3 100644
--- a/hmp.c
+++ b/hmp.c
@@ -1783,6 +1783,68 @@ void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict)
     hmp_handle_error(mon, &err);
 }
 
+#ifdef CONFIG_VIRTFS
+
+void hmp_fsdev_set_io_throttle(Monitor *mon, const QDict *qdict)
+{
+    Error *err = NULL;
+    IOThrottle throttle = {
+        .has_id = true,
+        .id = (char *) qdict_get_str(qdict, "device"),
+    };
+
+    hmp_initialize_io_throttle(&throttle, qdict);
+    qmp_fsdev_set_io_throttle(&throttle, &err);
+    hmp_handle_error(mon, &err);
+}
+
+static void print_fsdev_throttle_config(Monitor *mon, IOThrottle *fscfg,
+                                       Error *err)
+{
+    monitor_printf(mon, "%s", fscfg->id);
+    monitor_printf(mon, "    I/O throttling:"
+                   " bps=%" PRId64
+                   " bps_rd=%" PRId64  " bps_wr=%" PRId64
+                   " bps_max=%" PRId64
+                   " bps_rd_max=%" PRId64
+                   " bps_wr_max=%" PRId64
+                   " iops=%" PRId64 " iops_rd=%" PRId64
+                   " iops_wr=%" PRId64
+                   " iops_max=%" PRId64
+                   " iops_rd_max=%" PRId64
+                   " iops_wr_max=%" PRId64
+                   " iops_size=%" PRId64
+                   "\n",
+                   fscfg->bps,
+                   fscfg->bps_rd,
+                   fscfg->bps_wr,
+                   fscfg->bps_max,
+                   fscfg->bps_rd_max,
+                   fscfg->bps_wr_max,
+                   fscfg->iops,
+                   fscfg->iops_rd,
+                   fscfg->iops_wr,
+                   fscfg->iops_max,
+                   fscfg->iops_rd_max,
+                   fscfg->iops_wr_max,
+                   fscfg->iops_size);
+   hmp_handle_error(mon, &err);
+}
+
+void hmp_info_fsdev_iothrottle(Monitor *mon, const QDict *qdict)
+{
+    Error *err = NULL;
+    IOThrottleList *fsdev_list, *info;
+    fsdev_list = qmp_query_fsdev_io_throttle(&err);
+
+    for (info = fsdev_list; info; info = info->next) {
+        print_fsdev_throttle_config(mon, info->value, err);
+    }
+    qapi_free_IOThrottleList(fsdev_list);
+}
+
+#endif
+
 void hmp_block_stream(Monitor *mon, const QDict *qdict)
 {
     Error *error = NULL;
diff --git a/hmp.h b/hmp.h
index 1ff4552..d700d7d 100644
--- a/hmp.h
+++ b/hmp.h
@@ -81,6 +81,10 @@ void hmp_set_password(Monitor *mon, const QDict *qdict);
 void hmp_expire_password(Monitor *mon, const QDict *qdict);
 void hmp_eject(Monitor *mon, const QDict *qdict);
 void hmp_change(Monitor *mon, const QDict *qdict);
+#ifdef CONFIG_VIRTFS
+void hmp_fsdev_set_io_throttle(Monitor *mon, const QDict *qdict);
+void hmp_info_fsdev_iothrottle(Monitor *mon, const QDict *qdict);
+#endif
 void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict);
 void hmp_block_stream(Monitor *mon, const QDict *qdict);
 void hmp_block_job_set_speed(Monitor *mon, const QDict *qdict);
-- 
1.8.3.1

Re: [Qemu-devel] [PATCH V8 2/6] qmp: Create IOThrottle structure

[Eric Blake]

[-- Attachment #1: Type: text/plain, Size: 2010 bytes --]

On 08/07/2017 07:37 AM, Pradeep Jagadeesh wrote:
> This patch enables qmp interfaces for the fsdev
> devices. This provides two interfaces one
> for querying info of all the fsdev devices. The second one
> to set the IO limits for the required fsdev device.
> 
> Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
> Reviewed-by: Greg Kurz <groug@kaod.org>
> Reviewed-by: Eric Blake <eblake@redhat.com>
> Reviewed-by: Alberto Garcia <berto@igalia.com>
> ---
>  qapi/block-core.json | 76 ++-------------------------------------------
>  qapi/iothrottle.json | 88 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 91 insertions(+), 73 deletions(-)
>  create mode 100644 qapi/iothrottle.json

I'm wondering how much of this overlaps or even duplicates Manos'
efforts on making throttling a separate filter BDS.


> +++ b/qapi/iothrottle.json
> @@ -0,0 +1,88 @@
> +# -*- Mode: Python -*-
> +
> +##
> +# == QAPI IOThrottle definitions
> +##
> +
> +##
> +# @IOThrottle:
> +#
> +# A set of parameters describing IO throttling
> +#
> +# @id: The name or QOM path of the guest device (since: 2.8)

> +# Since: 2.10

Also, we've missed freeze for 2.10; this refactoring now belongs in 2.11.

> +##
> +{ 'struct': 'IOThrottle',
> +  'data': { '*id': 'str', 'bps': 'int', 'bps_rd': 'int',
> +            'bps_wr': 'int', 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
> +            '*bps_max': 'int', '*bps_rd_max': 'int',
> +            '*bps_wr_max': 'int', '*iops_max': 'int',
> +            '*iops_rd_max': 'int', '*iops_wr_max': 'int',
> +            '*bps_max_length': 'int', '*bps_rd_max_length': 'int',
> +            '*bps_wr_max_length': 'int', '*iops_max_length': 'int',
> +            '*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int',
> +            '*iops_size': 'int' } }
> 

-- 
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 619 bytes --]

Re: [Qemu-devel] [PATCH V8 5/6] fsdev: QMP interface for throttling

[Eric Blake]

[-- Attachment #1: Type: text/plain, Size: 1452 bytes --]

On 08/07/2017 07:37 AM, Pradeep Jagadeesh wrote:
> This patch introduces qmp interfaces for the fsdev
> devices. This provides two interfaces one
> for querying info of all the fsdev devices. The second one
> to set the IO limits for the required fsdev device.
> 
> Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
> ---
>  Makefile                    |  4 +++
>  fsdev/qemu-fsdev-dummy.c    | 11 ++++++
>  fsdev/qemu-fsdev-throttle.c | 76 ++++++++++++++++++++++++++++++++++++++++
>  fsdev/qemu-fsdev-throttle.h |  8 +++--
>  fsdev/qemu-fsdev.c          | 38 ++++++++++++++++++++
>  monitor.c                   |  5 +++
>  qapi-schema.json            |  3 ++
>  qapi/fsdev.json             | 84 +++++++++++++++++++++++++++++++++++++++++++++
>  qmp.c                       | 14 ++++++++
>  9 files changed, 241 insertions(+), 2 deletions(-)
>  create mode 100644 qapi/fsdev.json
> 

> +##
> +# @fsdev-set-io-throttle:
> +#
> +# Change I/O limits for a 9p/fsdev device.
> +#
> +# I/O limits can be enabled by setting throttle value to non-zero number.
> +#
> +# I/O limits can be disabled by setting all throttle values to 0.
> +#
> +# Returns: Nothing on success
> +#          If @device is not a valid fsdev device, GenericError
> +#
> +# Since: 2.10
> +#

2.11, now.

-- 
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 619 bytes --]

Re: [Qemu-devel] [PATCH V8 5/6] fsdev: QMP interface for throttling

[Pradeep Jagadeesh]

On 8/7/2017 2:44 PM, Eric Blake wrote:
> On 08/07/2017 07:37 AM, Pradeep Jagadeesh wrote:
>> This patch introduces qmp interfaces for the fsdev
>> devices. This provides two interfaces one
>> for querying info of all the fsdev devices. The second one
>> to set the IO limits for the required fsdev device.
>>
>> Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
>> ---
>>  Makefile                    |  4 +++
>>  fsdev/qemu-fsdev-dummy.c    | 11 ++++++
>>  fsdev/qemu-fsdev-throttle.c | 76 ++++++++++++++++++++++++++++++++++++++++
>>  fsdev/qemu-fsdev-throttle.h |  8 +++--
>>  fsdev/qemu-fsdev.c          | 38 ++++++++++++++++++++
>>  monitor.c                   |  5 +++
>>  qapi-schema.json            |  3 ++
>>  qapi/fsdev.json             | 84 +++++++++++++++++++++++++++++++++++++++++++++
>>  qmp.c                       | 14 ++++++++
>>  9 files changed, 241 insertions(+), 2 deletions(-)
>>  create mode 100644 qapi/fsdev.json
>>
>
>> +##
>> +# @fsdev-set-io-throttle:
>> +#
>> +# Change I/O limits for a 9p/fsdev device.
>> +#
>> +# I/O limits can be enabled by setting throttle value to non-zero number.
>> +#
>> +# I/O limits can be disabled by setting all throttle values to 0.
>> +#
>> +# Returns: Nothing on success
>> +#          If @device is not a valid fsdev device, GenericError
>> +#
>> +# Since: 2.10
>> +#
>

> 2.11, now.

Hmm!.

-Pradeep

>

Re: [Qemu-devel] [PATCH V8 4/6] hmp: create a throttle initialization function for code reusability

[Alberto Garcia]

On Mon 07 Aug 2017 02:37:36 PM CEST, Pradeep Jagadeesh wrote:
> This patch creates a throttle initialization function to maximize the
> code reusability. The same code is also used by fsdev.
>
> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>

Reviewed-by: Alberto Garcia <berto@igalia.com>

Berto

Re: [Qemu-devel] [PATCH V8 3/6] throttle: move out function to reuse the code

[Alberto Garcia]

On Mon 07 Aug 2017 02:37:35 PM CEST, Pradeep Jagadeesh wrote:
> This patch move out the throttle code to util/throttle.c to maximize
> the reusability of the code.The same code is also used by fsdev.
>
> Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>

> +    iothrottle = qapi_BlockIOThrottle_base(arg);
> +    throttle_set_io_limits(&cfg, iothrottle);

Since you only use it once, you can spare the definition of the local
iothrottle variable with

     throttle_set_io_limits(&cfg, qapi_BlockIOThrottle_base(arg));

but it's ok with me if you decide to leave it as it is now.

> --- a/include/qemu/throttle-options.h
> +++ b/include/qemu/throttle-options.h
> @@ -11,6 +11,7 @@
>  #define THROTTLE_OPTIONS_H
>  
>  #include "typedefs.h"
> +#include "qapi-types.h"
>  
>  #define THROTTLE_OPTS \
>            { \
> @@ -93,4 +94,6 @@
>  
>  void throttle_parse_options(ThrottleConfig *, QemuOpts *);
>  
> +void throttle_set_io_limits(ThrottleConfig *, IOThrottle *);
> +

Please remove the empty line between those two prototypes.

> +/* set the throttle limits

Or rather "Initialize a throttle config from an IOThrottle structure"

> + *
> + * @arg: iothrottle limits
> + * @cfg: throttle configuration
> + */
> +void throttle_set_io_limits(ThrottleConfig *cfg, IOThrottle *arg)
> +{

With those changes (the first one is optional),

Reviewed-by: Alberto Garcia <berto@igalia.com>

Berto

[Qemu-devel] [PATCH v8 4/6] hmp: create a throttle initialization function for code reusability

[Pradeep Jagadeesh]

This patch creates a throttle initialization function to maximize the
code reusability. The same code is also used by fsdev.

Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
---
 hmp.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/hmp.c b/hmp.c
index fd80dce..2dbfb80 100644
--- a/hmp.c
+++ b/hmp.c
@@ -1758,20 +1758,27 @@ void hmp_change(Monitor *mon, const QDict *qdict)
     hmp_handle_error(mon, &err);
 }
 
+static void hmp_initialize_io_throttle(IOThrottle *iot, const QDict *qdict)
+{
+    iot->bps = qdict_get_int(qdict, "bps");
+    iot->bps_rd = qdict_get_int(qdict, "bps_rd");
+    iot->bps_wr = qdict_get_int(qdict, "bps_wr");
+    iot->iops = qdict_get_int(qdict, "iops");
+    iot->iops_rd = qdict_get_int(qdict, "iops_rd");
+    iot->iops_wr = qdict_get_int(qdict, "iops_wr");
+}
+
 void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict)
 {
     Error *err = NULL;
+    IOThrottle *iothrottle;
     BlockIOThrottle throttle = {
         .has_device = true,
         .device = (char *) qdict_get_str(qdict, "device"),
-        .bps = qdict_get_int(qdict, "bps"),
-        .bps_rd = qdict_get_int(qdict, "bps_rd"),
-        .bps_wr = qdict_get_int(qdict, "bps_wr"),
-        .iops = qdict_get_int(qdict, "iops"),
-        .iops_rd = qdict_get_int(qdict, "iops_rd"),
-        .iops_wr = qdict_get_int(qdict, "iops_wr"),
     };
 
+    iothrottle = qapi_BlockIOThrottle_base(&throttle);
+    hmp_initialize_io_throttle(iothrottle, qdict);
     qmp_block_set_io_throttle(&throttle, &err);
     hmp_handle_error(mon, &err);
 }
-- 
1.8.3.1