* [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi
Cc: zangleigang, gengjianfeng, sunzhaosheng, ian.rickards,
guodong.xu, puck.chen, john.stultz, liwei213, fengbaopeng
This patchset adds driver support for UFS for Hi3660 SoC. It is verified on HiKey960 board.
Li Wei (4):
scsi: ufs: add Hisilicon ufs driver code
dt-bindings: scsi: ufs: add document for hisi-ufs
arm64: dts: add ufs dts node
arm64: defconfig: enable configs for Hisilicon ufs
Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 41 ++
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 10 +-
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 +
arch/arm64/configs/defconfig | 1 +
drivers/scsi/ufs/Kconfig | 9 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufs-hisi.c | 619 +++++++++++++++++++++
drivers/scsi/ufs/ufs-hisi.h | 115 ++++
8 files changed, 811 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
create mode 100644 drivers/scsi/ufs/ufs-hisi.c
create mode 100644 drivers/scsi/ufs/ufs-hisi.h
Major changes in v11:
- solve review comments from John Stultz.
*include Rob Herring's Reviewed-by tag to the dt-binding patch.
*drop the defconfig changes, such as f2fs and squashfs related.
Major changes in v10:
- solve review comments from Rob Herring.
*Modify the "reset-names" describe in ufs-hisi.txt binding file.
*List clocks in ufs-hisi.txt binding file.
*remove the "arst" and keep only "rst" in the binging files.
*remove the "arst" member from both dts and c code.
Major changes in v9:
- solve review comments from Rob Herring.
*remove freq-table-hz in ufs-hisi.txt binding file.
*Move the rst to the ufshcd_pltfm.txt common binding file.
*Modify the member "assert" of UFS host structure to "arst".
Major changes in v8:
- solve review comments from zhangfei.
*Add Version history.
- solve review comments from Rob Herring.
*remove freq-table-hz.
- solve review comments from Riku Voipio.
*Add MODULE_DEVICE_TABLE for ufs driver.
--
Major changes in v7:
- solve review comments from Philippe Ombredanne.
*use the new SPDX license ids instead of the GNU General Public License.
--
2.15.0
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi
Cc: zangleigang, gengjianfeng, sunzhaosheng, ian.rickards,
guodong.xu, puck.chen, john.stultz, liwei213, fengbaopeng
This patchset adds driver support for UFS for Hi3660 SoC. It is verified on HiKey960 board.
Li Wei (4):
scsi: ufs: add Hisilicon ufs driver code
dt-bindings: scsi: ufs: add document for hisi-ufs
arm64: dts: add ufs dts node
arm64: defconfig: enable configs for Hisilicon ufs
Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 41 ++
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 10 +-
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 +
arch/arm64/configs/defconfig | 1 +
drivers/scsi/ufs/Kconfig | 9 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufs-hisi.c | 619 +++++++++++++++++++++
drivers/scsi/ufs/ufs-hisi.h | 115 ++++
8 files changed, 811 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
create mode 100644 drivers/scsi/ufs/ufs-hisi.c
create mode 100644 drivers/scsi/ufs/ufs-hisi.h
Major changes in v11:
- solve review comments from John Stultz.
*include Rob Herring's Reviewed-by tag to the dt-binding patch.
*drop the defconfig changes, such as f2fs and squashfs related.
Major changes in v10:
- solve review comments from Rob Herring.
*Modify the "reset-names" describe in ufs-hisi.txt binding file.
*List clocks in ufs-hisi.txt binding file.
*remove the "arst" and keep only "rst" in the binging files.
*remove the "arst" member from both dts and c code.
Major changes in v9:
- solve review comments from Rob Herring.
*remove freq-table-hz in ufs-hisi.txt binding file.
*Move the rst to the ufshcd_pltfm.txt common binding file.
*Modify the member "assert" of UFS host structure to "arst".
Major changes in v8:
- solve review comments from zhangfei.
*Add Version history.
- solve review comments from Rob Herring.
*remove freq-table-hz.
- solve review comments from Riku Voipio.
*Add MODULE_DEVICE_TABLE for ufs driver.
--
Major changes in v7:
- solve review comments from Philippe Ombredanne.
*use the new SPDX license ids instead of the GNU General Public License.
--
2.15.0
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: linux-arm-kernel
This patchset adds driver support for UFS for Hi3660 SoC. It is verified on HiKey960 board.
Li Wei (4):
scsi: ufs: add Hisilicon ufs driver code
dt-bindings: scsi: ufs: add document for hisi-ufs
arm64: dts: add ufs dts node
arm64: defconfig: enable configs for Hisilicon ufs
Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 41 ++
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 10 +-
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 +
arch/arm64/configs/defconfig | 1 +
drivers/scsi/ufs/Kconfig | 9 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufs-hisi.c | 619 +++++++++++++++++++++
drivers/scsi/ufs/ufs-hisi.h | 115 ++++
8 files changed, 811 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
create mode 100644 drivers/scsi/ufs/ufs-hisi.c
create mode 100644 drivers/scsi/ufs/ufs-hisi.h
Major changes in v11:
- solve review comments from John Stultz.
*include Rob Herring's Reviewed-by tag to the dt-binding patch.
*drop the defconfig changes, such as f2fs and squashfs related.
Major changes in v10:
- solve review comments from Rob Herring.
*Modify the "reset-names" describe in ufs-hisi.txt binding file.
*List clocks in ufs-hisi.txt binding file.
*remove the "arst" and keep only "rst" in the binging files.
*remove the "arst" member from both dts and c code.
Major changes in v9:
- solve review comments from Rob Herring.
*remove freq-table-hz in ufs-hisi.txt binding file.
*Move the rst to the ufshcd_pltfm.txt common binding file.
*Modify the member "assert" of UFS host structure to "arst".
Major changes in v8:
- solve review comments from zhangfei.
*Add Version history.
- solve review comments from Rob Herring.
*remove freq-table-hz.
- solve review comments from Riku Voipio.
*Add MODULE_DEVICE_TABLE for ufs driver.
--
Major changes in v7:
- solve review comments from Philippe Ombredanne.
*use the new SPDX license ids instead of the GNU General Public License.
--
2.15.0
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v11 1/4] [RESEND] scsi: ufs: add Hisilicon ufs driver code
2018-07-17 9:36 ` Li Wei
(?)
@ 2018-07-17 9:36 ` Li Wei
-1 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi
Cc: zangleigang, gengjianfeng, sunzhaosheng, ian.rickards,
guodong.xu, puck.chen, john.stultz, liwei213, fengbaopeng
add Hisilicon ufs driver code.
Signed-off-by: Li Wei <liwei213@huawei.com>
Signed-off-by: Geng Jianfeng <gengjianfeng@hisilicon.com>
Signed-off-by: Zang Leigang <zangleigang@hisilicon.com>
Signed-off-by: Yu Jianfeng <steven.yujianfeng@hisilicon.com>
Tested-by: John Stultz <john.stultz@linaro.org>
---
drivers/scsi/ufs/Kconfig | 9 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufs-hisi.c | 619 ++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufs-hisi.h | 115 ++++++++
4 files changed, 744 insertions(+)
create mode 100644 drivers/scsi/ufs/ufs-hisi.c
create mode 100644 drivers/scsi/ufs/ufs-hisi.h
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index e27b4d4e6ae2..e09fe6ab3572 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -100,3 +100,12 @@ config SCSI_UFS_QCOM
Select this if you have UFS controller on QCOM chipset.
If unsure, say N.
+
+config SCSI_UFS_HISI
+ tristate "Hisilicon specific hooks to UFS controller platform driver"
+ depends on (ARCH_HISI || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM
+ ---help---
+ This selects the Hisilicon specific additions to UFSHCD platform driver.
+
+ Select this if you have UFS controller on Hisilicon chipset.
+ If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 918f5791202d..2c50f03d8c4a 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
ufshcd-core-objs := ufshcd.o ufs-sysfs.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
+obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
new file mode 100644
index 000000000000..46df707e6f2c
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -0,0 +1,619 @@
+/*
+ * HiSilicon Hixxxx UFS Driver
+ *
+ * Copyright (c) 2016-2017 Linaro Ltd.
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "ufshcd.h"
+#include "ufshcd-pltfrm.h"
+#include "unipro.h"
+#include "ufs-hisi.h"
+#include "ufshci.h"
+
+static int ufs_hisi_check_hibern8(struct ufs_hba *hba)
+{
+ int err = 0;
+ u32 tx_fsm_val_0 = 0;
+ u32 tx_fsm_val_1 = 0;
+ unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
+
+ do {
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 0),
+ &tx_fsm_val_0);
+ err |= ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 1), &tx_fsm_val_1);
+ if (err || (tx_fsm_val_0 == TX_FSM_HIBERN8 &&
+ tx_fsm_val_1 == TX_FSM_HIBERN8))
+ break;
+
+ /* sleep for max. 200us */
+ usleep_range(100, 200);
+ } while (time_before(jiffies, timeout));
+
+ /*
+ * we might have scheduled out for long during polling so
+ * check the state again.
+ */
+ if (time_after(jiffies, timeout)) {
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 0),
+ &tx_fsm_val_0);
+ err |= ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 1), &tx_fsm_val_1);
+ }
+
+ if (err) {
+ dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
+ __func__, err);
+ } else if (tx_fsm_val_0 != TX_FSM_HIBERN8 ||
+ tx_fsm_val_1 != TX_FSM_HIBERN8) {
+ err = -1;
+ dev_err(hba->dev, "%s: invalid TX_FSM_STATE, lane0 = %d, lane1 = %d\n",
+ __func__, tx_fsm_val_0, tx_fsm_val_1);
+ }
+
+ return err;
+}
+
+static void ufs_hi3660_clk_init(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+ if (ufs_sys_ctrl_readl(host, PHY_CLK_CTRL) & BIT_SYSCTRL_REF_CLOCK_EN)
+ mdelay(1);
+ /* use abb clk */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_REFCLK_SRC_SEl, UFS_SYSCTRL);
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_REFCLK_ISO_EN, PHY_ISO_EN);
+ /* open mphy ref clk */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+}
+
+static void ufs_hi3660_soc_init(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+ u32 reg;
+
+ if (!IS_ERR(host->rst))
+ reset_control_assert(host->rst);
+
+ /* HC_PSW powerup */
+ ufs_sys_ctrl_set_bits(host, BIT_UFS_PSW_MTCMOS_EN, PSW_POWER_CTRL);
+ udelay(10);
+ /* notify PWR ready */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_PWR_READY, HC_LP_CTRL);
+ ufs_sys_ctrl_writel(host, MASK_UFS_DEVICE_RESET | 0,
+ UFS_DEVICE_RESET_CTRL);
+
+ reg = ufs_sys_ctrl_readl(host, PHY_CLK_CTRL);
+ reg = (reg & ~MASK_SYSCTRL_CFG_CLOCK_FREQ) | UFS_FREQ_CFG_CLK;
+ /* set cfg clk freq */
+ ufs_sys_ctrl_writel(host, reg, PHY_CLK_CTRL);
+ /* set ref clk freq */
+ ufs_sys_ctrl_clr_bits(host, MASK_SYSCTRL_REF_CLOCK_SEL, PHY_CLK_CTRL);
+ /* bypass ufs clk gate */
+ ufs_sys_ctrl_set_bits(host, MASK_UFS_CLK_GATE_BYPASS,
+ CLOCK_GATE_BYPASS);
+ ufs_sys_ctrl_set_bits(host, MASK_UFS_SYSCRTL_BYPASS, UFS_SYSCTRL);
+
+ /* open psw clk */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_PSW_CLK_EN, PSW_CLK_CTRL);
+ /* disable ufshc iso */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_PSW_ISO_CTRL, PSW_POWER_CTRL);
+ /* disable phy iso */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_PHY_ISO_CTRL, PHY_ISO_EN);
+ /* notice iso disable */
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_LP_ISOL_EN, HC_LP_CTRL);
+
+ /* disable lp_reset_n */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_LP_RESET_N, RESET_CTRL_EN);
+ mdelay(1);
+
+ ufs_sys_ctrl_writel(host, MASK_UFS_DEVICE_RESET | BIT_UFS_DEVICE_RESET,
+ UFS_DEVICE_RESET_CTRL);
+
+ msleep(20);
+
+ /*
+ * enable the fix of linereset recovery,
+ * and enable rx_reset/tx_rest beat
+ * enable ref_clk_en override(bit5) &
+ * override value = 1(bit4), with mask
+ */
+ ufs_sys_ctrl_writel(host, 0x03300330, UFS_DEVICE_RESET_CTRL);
+
+ if (!IS_ERR(host->rst))
+ reset_control_deassert(host->rst);
+}
+
+static int ufs_hisi_link_startup_pre_change(struct ufs_hba *hba)
+{
+ int err;
+ uint32_t value;
+ uint32_t reg;
+
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), 0x1);
+ /* PA_HSSeries */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x156A, 0x0), 0x2);
+ /* MPHY CBRATESEL */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8114, 0x0), 0x1);
+ /* MPHY CBOVRCTRL2 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8121, 0x0), 0x2D);
+ /* MPHY CBOVRCTRL3 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8122, 0x0), 0x1);
+ /* Unipro VS_MphyCfgUpdt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+ /* MPHY RXOVRCTRL4 rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800D, 0x4), 0x58);
+ /* MPHY RXOVRCTRL4 rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800D, 0x5), 0x58);
+ /* MPHY RXOVRCTRL5 rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800E, 0x4), 0xB);
+ /* MPHY RXOVRCTRL5 rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800E, 0x5), 0xB);
+ /* MPHY RXSQCONTROL rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8009, 0x4), 0x1);
+ /* MPHY RXSQCONTROL rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8009, 0x5), 0x1);
+ /* Unipro VS_MphyCfgUpdt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8113, 0x0), 0x1);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+
+ /* Tactive RX */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008F, 0x4), 0x7);
+ /* Tactive RX */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008F, 0x5), 0x7);
+
+ /* Gear3 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0095, 0x4), 0x4F);
+ /* Gear3 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0095, 0x5), 0x4F);
+ /* Gear2 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0094, 0x4), 0x4F);
+ /* Gear2 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0094, 0x5), 0x4F);
+ /* Gear1 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008B, 0x4), 0x4F);
+ /* Gear1 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008B, 0x5), 0x4F);
+ /* Thibernate Tx */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x000F, 0x0), 0x5);
+ /* Thibernate Tx */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x000F, 0x1), 0x5);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), &value);
+ if (value != 0x1)
+ dev_info(hba->dev,
+ "Warring!!! Unipro VS_mphy_disable is 0x%x\n", value);
+
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), 0x0);
+ err = ufs_hisi_check_hibern8(hba);
+ if (err)
+ dev_err(hba->dev, "ufs_hisi_check_hibern8 error\n");
+
+ ufshcd_writel(hba, UFS_HCLKDIV_NORMAL_VALUE, UFS_REG_HCLKDIV);
+
+ /* disable auto H8 */
+ reg = ufshcd_readl(hba, REG_AUTO_HIBERNATE_IDLE_TIMER);
+ reg = reg & (~UFS_AHIT_AH8ITV_MASK);
+ ufshcd_writel(hba, reg, REG_AUTO_HIBERNATE_IDLE_TIMER);
+
+ /* Unipro PA_Local_TX_LCC_Enable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x155E, 0x0), 0x0);
+ /* close Unipro VS_Mk2ExtnSupport */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), 0x0);
+ ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), &value);
+ if (value != 0) {
+ /* Ensure close success */
+ dev_info(hba->dev, "WARN: close VS_Mk2ExtnSupport failed\n");
+ }
+
+ return err;
+}
+
+static int ufs_hisi_link_startup_post_change(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ /* Unipro DL_AFC0CreditThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2044), 0x0);
+ /* Unipro DL_TC0OutAckThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2045), 0x0);
+ /* Unipro DL_TC0TXFCThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2040), 0x9);
+
+ /* not bypass ufs clk gate */
+ ufs_sys_ctrl_clr_bits(host, MASK_UFS_CLK_GATE_BYPASS,
+ CLOCK_GATE_BYPASS);
+ ufs_sys_ctrl_clr_bits(host, MASK_UFS_SYSCRTL_BYPASS,
+ UFS_SYSCTRL);
+
+ /* select received symbol cnt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd09a), 0x80000000);
+ /* reset counter0 and enable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd09c), 0x00000005);
+
+ return 0;
+}
+
+static int ufs_hi3660_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ int err = 0;
+
+ switch (status) {
+ case PRE_CHANGE:
+ err = ufs_hisi_link_startup_pre_change(hba);
+ break;
+ case POST_CHANGE:
+ err = ufs_hisi_link_startup_post_change(hba);
+ break;
+ default:
+ break;
+ }
+
+ return err;
+}
+
+struct ufs_hisi_dev_params {
+ u32 pwm_rx_gear; /* pwm rx gear to work in */
+ u32 pwm_tx_gear; /* pwm tx gear to work in */
+ u32 hs_rx_gear; /* hs rx gear to work in */
+ u32 hs_tx_gear; /* hs tx gear to work in */
+ u32 rx_lanes; /* number of rx lanes */
+ u32 tx_lanes; /* number of tx lanes */
+ u32 rx_pwr_pwm; /* rx pwm working pwr */
+ u32 tx_pwr_pwm; /* tx pwm working pwr */
+ u32 rx_pwr_hs; /* rx hs working pwr */
+ u32 tx_pwr_hs; /* tx hs working pwr */
+ u32 hs_rate; /* rate A/B to work in HS */
+ u32 desired_working_mode;
+};
+
+static int ufs_hisi_get_pwr_dev_param(
+ struct ufs_hisi_dev_params *hisi_param,
+ struct ufs_pa_layer_attr *dev_max,
+ struct ufs_pa_layer_attr *agreed_pwr)
+{
+ int min_hisi_gear;
+ int min_dev_gear;
+ bool is_dev_sup_hs = false;
+ bool is_hisi_max_hs = false;
+
+ if (dev_max->pwr_rx == FASTAUTO_MODE || dev_max->pwr_rx == FAST_MODE)
+ is_dev_sup_hs = true;
+
+ if (hisi_param->desired_working_mode == FAST) {
+ is_hisi_max_hs = true;
+ min_hisi_gear = min_t(u32, hisi_param->hs_rx_gear,
+ hisi_param->hs_tx_gear);
+ } else {
+ min_hisi_gear = min_t(u32, hisi_param->pwm_rx_gear,
+ hisi_param->pwm_tx_gear);
+ }
+
+ /*
+ * device doesn't support HS but
+ * hisi_param->desired_working_mode is HS,
+ * thus device and hisi_param don't agree
+ */
+ if (!is_dev_sup_hs && is_hisi_max_hs) {
+ pr_err("%s: device not support HS\n", __func__);
+ return -ENOTSUPP;
+ } else if (is_dev_sup_hs && is_hisi_max_hs) {
+ /*
+ * since device supports HS, it supports FAST_MODE.
+ * since hisi_param->desired_working_mode is also HS
+ * then final decision (FAST/FASTAUTO) is done according
+ * to hisi_params as it is the restricting factor
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ hisi_param->rx_pwr_hs;
+ } else {
+ /*
+ * here hisi_param->desired_working_mode is PWM.
+ * it doesn't matter whether device supports HS or PWM,
+ * in both cases hisi_param->desired_working_mode will
+ * determine the mode
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ hisi_param->rx_pwr_pwm;
+ }
+
+ /*
+ * we would like tx to work in the minimum number of lanes
+ * between device capability and vendor preferences.
+ * the same decision will be made for rx
+ */
+ agreed_pwr->lane_tx =
+ min_t(u32, dev_max->lane_tx, hisi_param->tx_lanes);
+ agreed_pwr->lane_rx =
+ min_t(u32, dev_max->lane_rx, hisi_param->rx_lanes);
+
+ /* device maximum gear is the minimum between device rx and tx gears */
+ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+ /*
+ * if both device capabilities and vendor pre-defined preferences are
+ * both HS or both PWM then set the minimum gear to be the chosen
+ * working gear.
+ * if one is PWM and one is HS then the one that is PWM get to decide
+ * what is the gear, as it is the one that also decided previously what
+ * pwr the device will be configured to.
+ */
+ if ((is_dev_sup_hs && is_hisi_max_hs) ||
+ (!is_dev_sup_hs && !is_hisi_max_hs))
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx =
+ min_t(u32, min_dev_gear, min_hisi_gear);
+ else
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_hisi_gear;
+
+ agreed_pwr->hs_rate = hisi_param->hs_rate;
+
+ pr_info("ufs final power mode: gear = %d, lane = %d, pwr = %d, rate = %d\n",
+ agreed_pwr->gear_rx, agreed_pwr->lane_rx, agreed_pwr->pwr_rx,
+ agreed_pwr->hs_rate);
+ return 0;
+}
+
+static void ufs_hisi_set_dev_cap(struct ufs_hisi_dev_params *hisi_param)
+{
+ hisi_param->rx_lanes = UFS_HISI_LIMIT_NUM_LANES_RX;
+ hisi_param->tx_lanes = UFS_HISI_LIMIT_NUM_LANES_TX;
+ hisi_param->hs_rx_gear = UFS_HISI_LIMIT_HSGEAR_RX;
+ hisi_param->hs_tx_gear = UFS_HISI_LIMIT_HSGEAR_TX;
+ hisi_param->pwm_rx_gear = UFS_HISI_LIMIT_PWMGEAR_RX;
+ hisi_param->pwm_tx_gear = UFS_HISI_LIMIT_PWMGEAR_TX;
+ hisi_param->rx_pwr_pwm = UFS_HISI_LIMIT_RX_PWR_PWM;
+ hisi_param->tx_pwr_pwm = UFS_HISI_LIMIT_TX_PWR_PWM;
+ hisi_param->rx_pwr_hs = UFS_HISI_LIMIT_RX_PWR_HS;
+ hisi_param->tx_pwr_hs = UFS_HISI_LIMIT_TX_PWR_HS;
+ hisi_param->hs_rate = UFS_HISI_LIMIT_HS_RATE;
+ hisi_param->desired_working_mode = UFS_HISI_LIMIT_DESIRED_MODE;
+}
+
+static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba)
+{
+ /* update */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A8), 0x1);
+ /* PA_TxSkip */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x155c), 0x0);
+ /*PA_PWRModeUserData0 = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b0), 8191);
+ /*PA_PWRModeUserData1 = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b1), 65535);
+ /*PA_PWRModeUserData2 = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b2), 32767);
+ /*DME_FC0ProtectionTimeOutVal = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd041), 8191);
+ /*DME_TC0ReplayTimeOutVal = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd042), 65535);
+ /*DME_AFC0ReqTimeOutVal = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd043), 32767);
+ /*PA_PWRModeUserData3 = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b3), 8191);
+ /*PA_PWRModeUserData4 = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b4), 65535);
+ /*PA_PWRModeUserData5 = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b5), 32767);
+ /*DME_FC1ProtectionTimeOutVal = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd044), 8191);
+ /*DME_TC1ReplayTimeOutVal = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd045), 65535);
+ /*DME_AFC1ReqTimeOutVal = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd046), 32767);
+}
+
+static int ufs_hi3660_pwr_change_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status,
+ struct ufs_pa_layer_attr *dev_max_params,
+ struct ufs_pa_layer_attr *dev_req_params)
+{
+ struct ufs_hisi_dev_params ufs_hisi_cap;
+ int ret = 0;
+
+ if (!dev_req_params) {
+ dev_err(hba->dev,
+ "%s: incoming dev_req_params is NULL\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_hisi_set_dev_cap(&ufs_hisi_cap);
+ ret = ufs_hisi_get_pwr_dev_param(
+ &ufs_hisi_cap, dev_max_params, dev_req_params);
+ if (ret) {
+ dev_err(hba->dev,
+ "%s: failed to determine capabilities\n", __func__);
+ goto out;
+ }
+
+ ufs_hisi_pwr_change_pre_change(hba);
+ break;
+ case POST_CHANGE:
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+out:
+ return ret;
+}
+
+static int ufs_hisi_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ if (ufshcd_is_runtime_pm(pm_op))
+ return 0;
+
+ if (host->in_suspend) {
+ WARN_ON(1);
+ return 0;
+ }
+
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+ udelay(10);
+ /* set ref_dig_clk override of PHY PCS to 0 */
+ ufs_sys_ctrl_writel(host, 0x00100000, UFS_DEVICE_RESET_CTRL);
+
+ host->in_suspend = true;
+
+ return 0;
+}
+
+static int ufs_hisi_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ if (!host->in_suspend)
+ return 0;
+
+ /* set ref_dig_clk override of PHY PCS to 1 */
+ ufs_sys_ctrl_writel(host, 0x00100010, UFS_DEVICE_RESET_CTRL);
+ udelay(10);
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+
+ host->in_suspend = false;
+ return 0;
+}
+
+static int ufs_hisi_get_resource(struct ufs_hisi_host *host)
+{
+ struct resource *mem_res;
+ struct device *dev = host->hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ /* get resource of ufs sys ctrl */
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ host->ufs_sys_ctrl = devm_ioremap_resource(dev, mem_res);
+ if (IS_ERR(host->ufs_sys_ctrl))
+ return PTR_ERR(host->ufs_sys_ctrl);
+
+ return 0;
+}
+
+static void ufs_hisi_set_pm_lvl(struct ufs_hba *hba)
+{
+ hba->rpm_lvl = UFS_PM_LVL_1;
+ hba->spm_lvl = UFS_PM_LVL_3;
+}
+
+/**
+ * ufs_hisi_init_common
+ * @hba: host controller instance
+ */
+static int ufs_hisi_init_common(struct ufs_hba *hba)
+{
+ int err = 0;
+ struct device *dev = hba->dev;
+ struct ufs_hisi_host *host;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ host->hba = hba;
+ ufshcd_set_variant(hba, host);
+
+ host->rst = devm_reset_control_get(dev, "rst");
+
+ ufs_hisi_set_pm_lvl(hba);
+
+ err = ufs_hisi_get_resource(host);
+ if (err) {
+ ufshcd_set_variant(hba, NULL);
+ return err;
+ }
+
+ return 0;
+}
+
+static int ufs_hi3660_init(struct ufs_hba *hba)
+{
+ int ret = 0;
+ struct device *dev = hba->dev;
+
+ ret = ufs_hisi_init_common(hba);
+ if (ret) {
+ dev_err(dev, "%s: ufs common init fail\n", __func__);
+ return ret;
+ }
+
+ ufs_hi3660_clk_init(hba);
+
+ ufs_hi3660_soc_init(hba);
+
+ return 0;
+}
+
+static struct ufs_hba_variant_ops ufs_hba_hisi_vops = {
+ .name = "hi3660",
+ .init = ufs_hi3660_init,
+ .link_startup_notify = ufs_hi3660_link_startup_notify,
+ .pwr_change_notify = ufs_hi3660_pwr_change_notify,
+ .suspend = ufs_hisi_suspend,
+ .resume = ufs_hisi_resume,
+};
+
+static int ufs_hisi_probe(struct platform_device *pdev)
+{
+ return ufshcd_pltfrm_init(pdev, &ufs_hba_hisi_vops);
+}
+
+static int ufs_hisi_remove(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ ufshcd_remove(hba);
+ return 0;
+}
+
+static const struct of_device_id ufs_hisi_of_match[] = {
+ { .compatible = "hisilicon,hi3660-ufs" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, ufs_hisi_of_match);
+
+static const struct dev_pm_ops ufs_hisi_pm_ops = {
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+ .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+ .runtime_resume = ufshcd_pltfrm_runtime_resume,
+ .runtime_idle = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver ufs_hisi_pltform = {
+ .probe = ufs_hisi_probe,
+ .remove = ufs_hisi_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
+ .driver = {
+ .name = "ufshcd-hisi",
+ .pm = &ufs_hisi_pm_ops,
+ .of_match_table = of_match_ptr(ufs_hisi_of_match),
+ },
+};
+module_platform_driver(ufs_hisi_pltform);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ufshcd-hisi");
+MODULE_DESCRIPTION("HiSilicon Hixxxx UFS Driver");
diff --git a/drivers/scsi/ufs/ufs-hisi.h b/drivers/scsi/ufs/ufs-hisi.h
new file mode 100644
index 000000000000..3df9cd7acc29
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-hisi.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2017, HiSilicon. All rights reserved.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef UFS_HISI_H_
+#define UFS_HISI_H_
+
+#define HBRN8_POLL_TOUT_MS 1000
+
+/*
+ * ufs sysctrl specific define
+ */
+#define PSW_POWER_CTRL (0x04)
+#define PHY_ISO_EN (0x08)
+#define HC_LP_CTRL (0x0C)
+#define PHY_CLK_CTRL (0x10)
+#define PSW_CLK_CTRL (0x14)
+#define CLOCK_GATE_BYPASS (0x18)
+#define RESET_CTRL_EN (0x1C)
+#define UFS_SYSCTRL (0x5C)
+#define UFS_DEVICE_RESET_CTRL (0x60)
+
+#define BIT_UFS_PSW_ISO_CTRL (1 << 16)
+#define BIT_UFS_PSW_MTCMOS_EN (1 << 0)
+#define BIT_UFS_REFCLK_ISO_EN (1 << 16)
+#define BIT_UFS_PHY_ISO_CTRL (1 << 0)
+#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16)
+#define BIT_SYSCTRL_PWR_READY (1 << 8)
+#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24)
+#define MASK_SYSCTRL_REF_CLOCK_SEL (0x3 << 8)
+#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF)
+#define UFS_FREQ_CFG_CLK (0x39)
+#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4)
+#define MASK_UFS_CLK_GATE_BYPASS (0x3F)
+#define BIT_SYSCTRL_LP_RESET_N (1 << 0)
+#define BIT_UFS_REFCLK_SRC_SEl (1 << 0)
+#define MASK_UFS_SYSCRTL_BYPASS (0x3F << 16)
+#define MASK_UFS_DEVICE_RESET (0x1 << 16)
+#define BIT_UFS_DEVICE_RESET (0x1)
+
+/*
+ * M-TX Configuration Attributes for Hixxxx
+ */
+#define MPHY_TX_FSM_STATE 0x41
+#define TX_FSM_HIBERN8 0x1
+
+/*
+ * Hixxxx UFS HC specific Registers
+ */
+enum {
+ UFS_REG_OCPTHRTL = 0xc0,
+ UFS_REG_OOCPR = 0xc4,
+
+ UFS_REG_CDACFG = 0xd0,
+ UFS_REG_CDATX1 = 0xd4,
+ UFS_REG_CDATX2 = 0xd8,
+ UFS_REG_CDARX1 = 0xdc,
+ UFS_REG_CDARX2 = 0xe0,
+ UFS_REG_CDASTA = 0xe4,
+
+ UFS_REG_LBMCFG = 0xf0,
+ UFS_REG_LBMSTA = 0xf4,
+ UFS_REG_UFSMODE = 0xf8,
+
+ UFS_REG_HCLKDIV = 0xfc,
+};
+
+/* AHIT - Auto-Hibernate Idle Timer */
+#define UFS_AHIT_AH8ITV_MASK 0x3FF
+
+/* REG UFS_REG_OCPTHRTL definition */
+#define UFS_HCLKDIV_NORMAL_VALUE 0xE4
+
+/* vendor specific pre-defined parameters */
+#define SLOW 1
+#define FAST 2
+
+#define UFS_HISI_LIMIT_NUM_LANES_RX 2
+#define UFS_HISI_LIMIT_NUM_LANES_TX 2
+#define UFS_HISI_LIMIT_HSGEAR_RX UFS_HS_G3
+#define UFS_HISI_LIMIT_HSGEAR_TX UFS_HS_G3
+#define UFS_HISI_LIMIT_PWMGEAR_RX UFS_PWM_G4
+#define UFS_HISI_LIMIT_PWMGEAR_TX UFS_PWM_G4
+#define UFS_HISI_LIMIT_RX_PWR_PWM SLOW_MODE
+#define UFS_HISI_LIMIT_TX_PWR_PWM SLOW_MODE
+#define UFS_HISI_LIMIT_RX_PWR_HS FAST_MODE
+#define UFS_HISI_LIMIT_TX_PWR_HS FAST_MODE
+#define UFS_HISI_LIMIT_HS_RATE PA_HS_MODE_B
+#define UFS_HISI_LIMIT_DESIRED_MODE FAST
+
+struct ufs_hisi_host {
+ struct ufs_hba *hba;
+ void __iomem *ufs_sys_ctrl;
+
+ struct reset_control *rst;
+
+ uint64_t caps;
+
+ bool in_suspend;
+};
+
+#define ufs_sys_ctrl_writel(host, val, reg) \
+ writel((val), (host)->ufs_sys_ctrl + (reg))
+#define ufs_sys_ctrl_readl(host, reg) readl((host)->ufs_sys_ctrl + (reg))
+#define ufs_sys_ctrl_set_bits(host, mask, reg) \
+ ufs_sys_ctrl_writel( \
+ (host), ((mask) | (ufs_sys_ctrl_readl((host), (reg)))), (reg))
+#define ufs_sys_ctrl_clr_bits(host, mask, reg) \
+ ufs_sys_ctrl_writel((host), \
+ ((~(mask)) & (ufs_sys_ctrl_readl((host), (reg)))), \
+ (reg))
+#endif /* UFS_HISI_H_ */
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 1/4] [RESEND] scsi: ufs: add Hisilicon ufs driver code
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi
Cc: zangleigang, gengjianfeng, sunzhaosheng, ian.rickards,
guodong.xu, puck.chen, john.stultz, liwei213, fengbaopeng
add Hisilicon ufs driver code.
Signed-off-by: Li Wei <liwei213@huawei.com>
Signed-off-by: Geng Jianfeng <gengjianfeng@hisilicon.com>
Signed-off-by: Zang Leigang <zangleigang@hisilicon.com>
Signed-off-by: Yu Jianfeng <steven.yujianfeng@hisilicon.com>
Tested-by: John Stultz <john.stultz@linaro.org>
---
drivers/scsi/ufs/Kconfig | 9 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufs-hisi.c | 619 ++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufs-hisi.h | 115 ++++++++
4 files changed, 744 insertions(+)
create mode 100644 drivers/scsi/ufs/ufs-hisi.c
create mode 100644 drivers/scsi/ufs/ufs-hisi.h
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index e27b4d4e6ae2..e09fe6ab3572 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -100,3 +100,12 @@ config SCSI_UFS_QCOM
Select this if you have UFS controller on QCOM chipset.
If unsure, say N.
+
+config SCSI_UFS_HISI
+ tristate "Hisilicon specific hooks to UFS controller platform driver"
+ depends on (ARCH_HISI || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM
+ ---help---
+ This selects the Hisilicon specific additions to UFSHCD platform driver.
+
+ Select this if you have UFS controller on Hisilicon chipset.
+ If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 918f5791202d..2c50f03d8c4a 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
ufshcd-core-objs := ufshcd.o ufs-sysfs.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
+obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
new file mode 100644
index 000000000000..46df707e6f2c
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -0,0 +1,619 @@
+/*
+ * HiSilicon Hixxxx UFS Driver
+ *
+ * Copyright (c) 2016-2017 Linaro Ltd.
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "ufshcd.h"
+#include "ufshcd-pltfrm.h"
+#include "unipro.h"
+#include "ufs-hisi.h"
+#include "ufshci.h"
+
+static int ufs_hisi_check_hibern8(struct ufs_hba *hba)
+{
+ int err = 0;
+ u32 tx_fsm_val_0 = 0;
+ u32 tx_fsm_val_1 = 0;
+ unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
+
+ do {
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 0),
+ &tx_fsm_val_0);
+ err |= ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 1), &tx_fsm_val_1);
+ if (err || (tx_fsm_val_0 == TX_FSM_HIBERN8 &&
+ tx_fsm_val_1 == TX_FSM_HIBERN8))
+ break;
+
+ /* sleep for max. 200us */
+ usleep_range(100, 200);
+ } while (time_before(jiffies, timeout));
+
+ /*
+ * we might have scheduled out for long during polling so
+ * check the state again.
+ */
+ if (time_after(jiffies, timeout)) {
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 0),
+ &tx_fsm_val_0);
+ err |= ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 1), &tx_fsm_val_1);
+ }
+
+ if (err) {
+ dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
+ __func__, err);
+ } else if (tx_fsm_val_0 != TX_FSM_HIBERN8 ||
+ tx_fsm_val_1 != TX_FSM_HIBERN8) {
+ err = -1;
+ dev_err(hba->dev, "%s: invalid TX_FSM_STATE, lane0 = %d, lane1 = %d\n",
+ __func__, tx_fsm_val_0, tx_fsm_val_1);
+ }
+
+ return err;
+}
+
+static void ufs_hi3660_clk_init(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+ if (ufs_sys_ctrl_readl(host, PHY_CLK_CTRL) & BIT_SYSCTRL_REF_CLOCK_EN)
+ mdelay(1);
+ /* use abb clk */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_REFCLK_SRC_SEl, UFS_SYSCTRL);
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_REFCLK_ISO_EN, PHY_ISO_EN);
+ /* open mphy ref clk */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+}
+
+static void ufs_hi3660_soc_init(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+ u32 reg;
+
+ if (!IS_ERR(host->rst))
+ reset_control_assert(host->rst);
+
+ /* HC_PSW powerup */
+ ufs_sys_ctrl_set_bits(host, BIT_UFS_PSW_MTCMOS_EN, PSW_POWER_CTRL);
+ udelay(10);
+ /* notify PWR ready */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_PWR_READY, HC_LP_CTRL);
+ ufs_sys_ctrl_writel(host, MASK_UFS_DEVICE_RESET | 0,
+ UFS_DEVICE_RESET_CTRL);
+
+ reg = ufs_sys_ctrl_readl(host, PHY_CLK_CTRL);
+ reg = (reg & ~MASK_SYSCTRL_CFG_CLOCK_FREQ) | UFS_FREQ_CFG_CLK;
+ /* set cfg clk freq */
+ ufs_sys_ctrl_writel(host, reg, PHY_CLK_CTRL);
+ /* set ref clk freq */
+ ufs_sys_ctrl_clr_bits(host, MASK_SYSCTRL_REF_CLOCK_SEL, PHY_CLK_CTRL);
+ /* bypass ufs clk gate */
+ ufs_sys_ctrl_set_bits(host, MASK_UFS_CLK_GATE_BYPASS,
+ CLOCK_GATE_BYPASS);
+ ufs_sys_ctrl_set_bits(host, MASK_UFS_SYSCRTL_BYPASS, UFS_SYSCTRL);
+
+ /* open psw clk */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_PSW_CLK_EN, PSW_CLK_CTRL);
+ /* disable ufshc iso */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_PSW_ISO_CTRL, PSW_POWER_CTRL);
+ /* disable phy iso */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_PHY_ISO_CTRL, PHY_ISO_EN);
+ /* notice iso disable */
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_LP_ISOL_EN, HC_LP_CTRL);
+
+ /* disable lp_reset_n */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_LP_RESET_N, RESET_CTRL_EN);
+ mdelay(1);
+
+ ufs_sys_ctrl_writel(host, MASK_UFS_DEVICE_RESET | BIT_UFS_DEVICE_RESET,
+ UFS_DEVICE_RESET_CTRL);
+
+ msleep(20);
+
+ /*
+ * enable the fix of linereset recovery,
+ * and enable rx_reset/tx_rest beat
+ * enable ref_clk_en override(bit5) &
+ * override value = 1(bit4), with mask
+ */
+ ufs_sys_ctrl_writel(host, 0x03300330, UFS_DEVICE_RESET_CTRL);
+
+ if (!IS_ERR(host->rst))
+ reset_control_deassert(host->rst);
+}
+
+static int ufs_hisi_link_startup_pre_change(struct ufs_hba *hba)
+{
+ int err;
+ uint32_t value;
+ uint32_t reg;
+
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), 0x1);
+ /* PA_HSSeries */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x156A, 0x0), 0x2);
+ /* MPHY CBRATESEL */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8114, 0x0), 0x1);
+ /* MPHY CBOVRCTRL2 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8121, 0x0), 0x2D);
+ /* MPHY CBOVRCTRL3 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8122, 0x0), 0x1);
+ /* Unipro VS_MphyCfgUpdt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+ /* MPHY RXOVRCTRL4 rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800D, 0x4), 0x58);
+ /* MPHY RXOVRCTRL4 rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800D, 0x5), 0x58);
+ /* MPHY RXOVRCTRL5 rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800E, 0x4), 0xB);
+ /* MPHY RXOVRCTRL5 rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800E, 0x5), 0xB);
+ /* MPHY RXSQCONTROL rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8009, 0x4), 0x1);
+ /* MPHY RXSQCONTROL rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8009, 0x5), 0x1);
+ /* Unipro VS_MphyCfgUpdt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8113, 0x0), 0x1);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+
+ /* Tactive RX */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008F, 0x4), 0x7);
+ /* Tactive RX */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008F, 0x5), 0x7);
+
+ /* Gear3 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0095, 0x4), 0x4F);
+ /* Gear3 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0095, 0x5), 0x4F);
+ /* Gear2 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0094, 0x4), 0x4F);
+ /* Gear2 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0094, 0x5), 0x4F);
+ /* Gear1 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008B, 0x4), 0x4F);
+ /* Gear1 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008B, 0x5), 0x4F);
+ /* Thibernate Tx */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x000F, 0x0), 0x5);
+ /* Thibernate Tx */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x000F, 0x1), 0x5);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), &value);
+ if (value != 0x1)
+ dev_info(hba->dev,
+ "Warring!!! Unipro VS_mphy_disable is 0x%x\n", value);
+
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), 0x0);
+ err = ufs_hisi_check_hibern8(hba);
+ if (err)
+ dev_err(hba->dev, "ufs_hisi_check_hibern8 error\n");
+
+ ufshcd_writel(hba, UFS_HCLKDIV_NORMAL_VALUE, UFS_REG_HCLKDIV);
+
+ /* disable auto H8 */
+ reg = ufshcd_readl(hba, REG_AUTO_HIBERNATE_IDLE_TIMER);
+ reg = reg & (~UFS_AHIT_AH8ITV_MASK);
+ ufshcd_writel(hba, reg, REG_AUTO_HIBERNATE_IDLE_TIMER);
+
+ /* Unipro PA_Local_TX_LCC_Enable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x155E, 0x0), 0x0);
+ /* close Unipro VS_Mk2ExtnSupport */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), 0x0);
+ ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), &value);
+ if (value != 0) {
+ /* Ensure close success */
+ dev_info(hba->dev, "WARN: close VS_Mk2ExtnSupport failed\n");
+ }
+
+ return err;
+}
+
+static int ufs_hisi_link_startup_post_change(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ /* Unipro DL_AFC0CreditThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2044), 0x0);
+ /* Unipro DL_TC0OutAckThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2045), 0x0);
+ /* Unipro DL_TC0TXFCThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2040), 0x9);
+
+ /* not bypass ufs clk gate */
+ ufs_sys_ctrl_clr_bits(host, MASK_UFS_CLK_GATE_BYPASS,
+ CLOCK_GATE_BYPASS);
+ ufs_sys_ctrl_clr_bits(host, MASK_UFS_SYSCRTL_BYPASS,
+ UFS_SYSCTRL);
+
+ /* select received symbol cnt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd09a), 0x80000000);
+ /* reset counter0 and enable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd09c), 0x00000005);
+
+ return 0;
+}
+
+static int ufs_hi3660_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ int err = 0;
+
+ switch (status) {
+ case PRE_CHANGE:
+ err = ufs_hisi_link_startup_pre_change(hba);
+ break;
+ case POST_CHANGE:
+ err = ufs_hisi_link_startup_post_change(hba);
+ break;
+ default:
+ break;
+ }
+
+ return err;
+}
+
+struct ufs_hisi_dev_params {
+ u32 pwm_rx_gear; /* pwm rx gear to work in */
+ u32 pwm_tx_gear; /* pwm tx gear to work in */
+ u32 hs_rx_gear; /* hs rx gear to work in */
+ u32 hs_tx_gear; /* hs tx gear to work in */
+ u32 rx_lanes; /* number of rx lanes */
+ u32 tx_lanes; /* number of tx lanes */
+ u32 rx_pwr_pwm; /* rx pwm working pwr */
+ u32 tx_pwr_pwm; /* tx pwm working pwr */
+ u32 rx_pwr_hs; /* rx hs working pwr */
+ u32 tx_pwr_hs; /* tx hs working pwr */
+ u32 hs_rate; /* rate A/B to work in HS */
+ u32 desired_working_mode;
+};
+
+static int ufs_hisi_get_pwr_dev_param(
+ struct ufs_hisi_dev_params *hisi_param,
+ struct ufs_pa_layer_attr *dev_max,
+ struct ufs_pa_layer_attr *agreed_pwr)
+{
+ int min_hisi_gear;
+ int min_dev_gear;
+ bool is_dev_sup_hs = false;
+ bool is_hisi_max_hs = false;
+
+ if (dev_max->pwr_rx == FASTAUTO_MODE || dev_max->pwr_rx == FAST_MODE)
+ is_dev_sup_hs = true;
+
+ if (hisi_param->desired_working_mode == FAST) {
+ is_hisi_max_hs = true;
+ min_hisi_gear = min_t(u32, hisi_param->hs_rx_gear,
+ hisi_param->hs_tx_gear);
+ } else {
+ min_hisi_gear = min_t(u32, hisi_param->pwm_rx_gear,
+ hisi_param->pwm_tx_gear);
+ }
+
+ /*
+ * device doesn't support HS but
+ * hisi_param->desired_working_mode is HS,
+ * thus device and hisi_param don't agree
+ */
+ if (!is_dev_sup_hs && is_hisi_max_hs) {
+ pr_err("%s: device not support HS\n", __func__);
+ return -ENOTSUPP;
+ } else if (is_dev_sup_hs && is_hisi_max_hs) {
+ /*
+ * since device supports HS, it supports FAST_MODE.
+ * since hisi_param->desired_working_mode is also HS
+ * then final decision (FAST/FASTAUTO) is done according
+ * to hisi_params as it is the restricting factor
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ hisi_param->rx_pwr_hs;
+ } else {
+ /*
+ * here hisi_param->desired_working_mode is PWM.
+ * it doesn't matter whether device supports HS or PWM,
+ * in both cases hisi_param->desired_working_mode will
+ * determine the mode
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ hisi_param->rx_pwr_pwm;
+ }
+
+ /*
+ * we would like tx to work in the minimum number of lanes
+ * between device capability and vendor preferences.
+ * the same decision will be made for rx
+ */
+ agreed_pwr->lane_tx =
+ min_t(u32, dev_max->lane_tx, hisi_param->tx_lanes);
+ agreed_pwr->lane_rx =
+ min_t(u32, dev_max->lane_rx, hisi_param->rx_lanes);
+
+ /* device maximum gear is the minimum between device rx and tx gears */
+ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+ /*
+ * if both device capabilities and vendor pre-defined preferences are
+ * both HS or both PWM then set the minimum gear to be the chosen
+ * working gear.
+ * if one is PWM and one is HS then the one that is PWM get to decide
+ * what is the gear, as it is the one that also decided previously what
+ * pwr the device will be configured to.
+ */
+ if ((is_dev_sup_hs && is_hisi_max_hs) ||
+ (!is_dev_sup_hs && !is_hisi_max_hs))
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx =
+ min_t(u32, min_dev_gear, min_hisi_gear);
+ else
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_hisi_gear;
+
+ agreed_pwr->hs_rate = hisi_param->hs_rate;
+
+ pr_info("ufs final power mode: gear = %d, lane = %d, pwr = %d, rate = %d\n",
+ agreed_pwr->gear_rx, agreed_pwr->lane_rx, agreed_pwr->pwr_rx,
+ agreed_pwr->hs_rate);
+ return 0;
+}
+
+static void ufs_hisi_set_dev_cap(struct ufs_hisi_dev_params *hisi_param)
+{
+ hisi_param->rx_lanes = UFS_HISI_LIMIT_NUM_LANES_RX;
+ hisi_param->tx_lanes = UFS_HISI_LIMIT_NUM_LANES_TX;
+ hisi_param->hs_rx_gear = UFS_HISI_LIMIT_HSGEAR_RX;
+ hisi_param->hs_tx_gear = UFS_HISI_LIMIT_HSGEAR_TX;
+ hisi_param->pwm_rx_gear = UFS_HISI_LIMIT_PWMGEAR_RX;
+ hisi_param->pwm_tx_gear = UFS_HISI_LIMIT_PWMGEAR_TX;
+ hisi_param->rx_pwr_pwm = UFS_HISI_LIMIT_RX_PWR_PWM;
+ hisi_param->tx_pwr_pwm = UFS_HISI_LIMIT_TX_PWR_PWM;
+ hisi_param->rx_pwr_hs = UFS_HISI_LIMIT_RX_PWR_HS;
+ hisi_param->tx_pwr_hs = UFS_HISI_LIMIT_TX_PWR_HS;
+ hisi_param->hs_rate = UFS_HISI_LIMIT_HS_RATE;
+ hisi_param->desired_working_mode = UFS_HISI_LIMIT_DESIRED_MODE;
+}
+
+static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba)
+{
+ /* update */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A8), 0x1);
+ /* PA_TxSkip */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x155c), 0x0);
+ /*PA_PWRModeUserData0 = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b0), 8191);
+ /*PA_PWRModeUserData1 = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b1), 65535);
+ /*PA_PWRModeUserData2 = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b2), 32767);
+ /*DME_FC0ProtectionTimeOutVal = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd041), 8191);
+ /*DME_TC0ReplayTimeOutVal = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd042), 65535);
+ /*DME_AFC0ReqTimeOutVal = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd043), 32767);
+ /*PA_PWRModeUserData3 = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b3), 8191);
+ /*PA_PWRModeUserData4 = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b4), 65535);
+ /*PA_PWRModeUserData5 = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b5), 32767);
+ /*DME_FC1ProtectionTimeOutVal = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd044), 8191);
+ /*DME_TC1ReplayTimeOutVal = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd045), 65535);
+ /*DME_AFC1ReqTimeOutVal = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd046), 32767);
+}
+
+static int ufs_hi3660_pwr_change_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status,
+ struct ufs_pa_layer_attr *dev_max_params,
+ struct ufs_pa_layer_attr *dev_req_params)
+{
+ struct ufs_hisi_dev_params ufs_hisi_cap;
+ int ret = 0;
+
+ if (!dev_req_params) {
+ dev_err(hba->dev,
+ "%s: incoming dev_req_params is NULL\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_hisi_set_dev_cap(&ufs_hisi_cap);
+ ret = ufs_hisi_get_pwr_dev_param(
+ &ufs_hisi_cap, dev_max_params, dev_req_params);
+ if (ret) {
+ dev_err(hba->dev,
+ "%s: failed to determine capabilities\n", __func__);
+ goto out;
+ }
+
+ ufs_hisi_pwr_change_pre_change(hba);
+ break;
+ case POST_CHANGE:
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+out:
+ return ret;
+}
+
+static int ufs_hisi_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ if (ufshcd_is_runtime_pm(pm_op))
+ return 0;
+
+ if (host->in_suspend) {
+ WARN_ON(1);
+ return 0;
+ }
+
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+ udelay(10);
+ /* set ref_dig_clk override of PHY PCS to 0 */
+ ufs_sys_ctrl_writel(host, 0x00100000, UFS_DEVICE_RESET_CTRL);
+
+ host->in_suspend = true;
+
+ return 0;
+}
+
+static int ufs_hisi_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ if (!host->in_suspend)
+ return 0;
+
+ /* set ref_dig_clk override of PHY PCS to 1 */
+ ufs_sys_ctrl_writel(host, 0x00100010, UFS_DEVICE_RESET_CTRL);
+ udelay(10);
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+
+ host->in_suspend = false;
+ return 0;
+}
+
+static int ufs_hisi_get_resource(struct ufs_hisi_host *host)
+{
+ struct resource *mem_res;
+ struct device *dev = host->hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ /* get resource of ufs sys ctrl */
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ host->ufs_sys_ctrl = devm_ioremap_resource(dev, mem_res);
+ if (IS_ERR(host->ufs_sys_ctrl))
+ return PTR_ERR(host->ufs_sys_ctrl);
+
+ return 0;
+}
+
+static void ufs_hisi_set_pm_lvl(struct ufs_hba *hba)
+{
+ hba->rpm_lvl = UFS_PM_LVL_1;
+ hba->spm_lvl = UFS_PM_LVL_3;
+}
+
+/**
+ * ufs_hisi_init_common
+ * @hba: host controller instance
+ */
+static int ufs_hisi_init_common(struct ufs_hba *hba)
+{
+ int err = 0;
+ struct device *dev = hba->dev;
+ struct ufs_hisi_host *host;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ host->hba = hba;
+ ufshcd_set_variant(hba, host);
+
+ host->rst = devm_reset_control_get(dev, "rst");
+
+ ufs_hisi_set_pm_lvl(hba);
+
+ err = ufs_hisi_get_resource(host);
+ if (err) {
+ ufshcd_set_variant(hba, NULL);
+ return err;
+ }
+
+ return 0;
+}
+
+static int ufs_hi3660_init(struct ufs_hba *hba)
+{
+ int ret = 0;
+ struct device *dev = hba->dev;
+
+ ret = ufs_hisi_init_common(hba);
+ if (ret) {
+ dev_err(dev, "%s: ufs common init fail\n", __func__);
+ return ret;
+ }
+
+ ufs_hi3660_clk_init(hba);
+
+ ufs_hi3660_soc_init(hba);
+
+ return 0;
+}
+
+static struct ufs_hba_variant_ops ufs_hba_hisi_vops = {
+ .name = "hi3660",
+ .init = ufs_hi3660_init,
+ .link_startup_notify = ufs_hi3660_link_startup_notify,
+ .pwr_change_notify = ufs_hi3660_pwr_change_notify,
+ .suspend = ufs_hisi_suspend,
+ .resume = ufs_hisi_resume,
+};
+
+static int ufs_hisi_probe(struct platform_device *pdev)
+{
+ return ufshcd_pltfrm_init(pdev, &ufs_hba_hisi_vops);
+}
+
+static int ufs_hisi_remove(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ ufshcd_remove(hba);
+ return 0;
+}
+
+static const struct of_device_id ufs_hisi_of_match[] = {
+ { .compatible = "hisilicon,hi3660-ufs" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, ufs_hisi_of_match);
+
+static const struct dev_pm_ops ufs_hisi_pm_ops = {
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+ .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+ .runtime_resume = ufshcd_pltfrm_runtime_resume,
+ .runtime_idle = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver ufs_hisi_pltform = {
+ .probe = ufs_hisi_probe,
+ .remove = ufs_hisi_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
+ .driver = {
+ .name = "ufshcd-hisi",
+ .pm = &ufs_hisi_pm_ops,
+ .of_match_table = of_match_ptr(ufs_hisi_of_match),
+ },
+};
+module_platform_driver(ufs_hisi_pltform);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ufshcd-hisi");
+MODULE_DESCRIPTION("HiSilicon Hixxxx UFS Driver");
diff --git a/drivers/scsi/ufs/ufs-hisi.h b/drivers/scsi/ufs/ufs-hisi.h
new file mode 100644
index 000000000000..3df9cd7acc29
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-hisi.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2017, HiSilicon. All rights reserved.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef UFS_HISI_H_
+#define UFS_HISI_H_
+
+#define HBRN8_POLL_TOUT_MS 1000
+
+/*
+ * ufs sysctrl specific define
+ */
+#define PSW_POWER_CTRL (0x04)
+#define PHY_ISO_EN (0x08)
+#define HC_LP_CTRL (0x0C)
+#define PHY_CLK_CTRL (0x10)
+#define PSW_CLK_CTRL (0x14)
+#define CLOCK_GATE_BYPASS (0x18)
+#define RESET_CTRL_EN (0x1C)
+#define UFS_SYSCTRL (0x5C)
+#define UFS_DEVICE_RESET_CTRL (0x60)
+
+#define BIT_UFS_PSW_ISO_CTRL (1 << 16)
+#define BIT_UFS_PSW_MTCMOS_EN (1 << 0)
+#define BIT_UFS_REFCLK_ISO_EN (1 << 16)
+#define BIT_UFS_PHY_ISO_CTRL (1 << 0)
+#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16)
+#define BIT_SYSCTRL_PWR_READY (1 << 8)
+#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24)
+#define MASK_SYSCTRL_REF_CLOCK_SEL (0x3 << 8)
+#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF)
+#define UFS_FREQ_CFG_CLK (0x39)
+#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4)
+#define MASK_UFS_CLK_GATE_BYPASS (0x3F)
+#define BIT_SYSCTRL_LP_RESET_N (1 << 0)
+#define BIT_UFS_REFCLK_SRC_SEl (1 << 0)
+#define MASK_UFS_SYSCRTL_BYPASS (0x3F << 16)
+#define MASK_UFS_DEVICE_RESET (0x1 << 16)
+#define BIT_UFS_DEVICE_RESET (0x1)
+
+/*
+ * M-TX Configuration Attributes for Hixxxx
+ */
+#define MPHY_TX_FSM_STATE 0x41
+#define TX_FSM_HIBERN8 0x1
+
+/*
+ * Hixxxx UFS HC specific Registers
+ */
+enum {
+ UFS_REG_OCPTHRTL = 0xc0,
+ UFS_REG_OOCPR = 0xc4,
+
+ UFS_REG_CDACFG = 0xd0,
+ UFS_REG_CDATX1 = 0xd4,
+ UFS_REG_CDATX2 = 0xd8,
+ UFS_REG_CDARX1 = 0xdc,
+ UFS_REG_CDARX2 = 0xe0,
+ UFS_REG_CDASTA = 0xe4,
+
+ UFS_REG_LBMCFG = 0xf0,
+ UFS_REG_LBMSTA = 0xf4,
+ UFS_REG_UFSMODE = 0xf8,
+
+ UFS_REG_HCLKDIV = 0xfc,
+};
+
+/* AHIT - Auto-Hibernate Idle Timer */
+#define UFS_AHIT_AH8ITV_MASK 0x3FF
+
+/* REG UFS_REG_OCPTHRTL definition */
+#define UFS_HCLKDIV_NORMAL_VALUE 0xE4
+
+/* vendor specific pre-defined parameters */
+#define SLOW 1
+#define FAST 2
+
+#define UFS_HISI_LIMIT_NUM_LANES_RX 2
+#define UFS_HISI_LIMIT_NUM_LANES_TX 2
+#define UFS_HISI_LIMIT_HSGEAR_RX UFS_HS_G3
+#define UFS_HISI_LIMIT_HSGEAR_TX UFS_HS_G3
+#define UFS_HISI_LIMIT_PWMGEAR_RX UFS_PWM_G4
+#define UFS_HISI_LIMIT_PWMGEAR_TX UFS_PWM_G4
+#define UFS_HISI_LIMIT_RX_PWR_PWM SLOW_MODE
+#define UFS_HISI_LIMIT_TX_PWR_PWM SLOW_MODE
+#define UFS_HISI_LIMIT_RX_PWR_HS FAST_MODE
+#define UFS_HISI_LIMIT_TX_PWR_HS FAST_MODE
+#define UFS_HISI_LIMIT_HS_RATE PA_HS_MODE_B
+#define UFS_HISI_LIMIT_DESIRED_MODE FAST
+
+struct ufs_hisi_host {
+ struct ufs_hba *hba;
+ void __iomem *ufs_sys_ctrl;
+
+ struct reset_control *rst;
+
+ uint64_t caps;
+
+ bool in_suspend;
+};
+
+#define ufs_sys_ctrl_writel(host, val, reg) \
+ writel((val), (host)->ufs_sys_ctrl + (reg))
+#define ufs_sys_ctrl_readl(host, reg) readl((host)->ufs_sys_ctrl + (reg))
+#define ufs_sys_ctrl_set_bits(host, mask, reg) \
+ ufs_sys_ctrl_writel( \
+ (host), ((mask) | (ufs_sys_ctrl_readl((host), (reg)))), (reg))
+#define ufs_sys_ctrl_clr_bits(host, mask, reg) \
+ ufs_sys_ctrl_writel((host), \
+ ((~(mask)) & (ufs_sys_ctrl_readl((host), (reg)))), \
+ (reg))
+#endif /* UFS_HISI_H_ */
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 1/4] [RESEND] scsi: ufs: add Hisilicon ufs driver code
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: linux-arm-kernel
add Hisilicon ufs driver code.
Signed-off-by: Li Wei <liwei213@huawei.com>
Signed-off-by: Geng Jianfeng <gengjianfeng@hisilicon.com>
Signed-off-by: Zang Leigang <zangleigang@hisilicon.com>
Signed-off-by: Yu Jianfeng <steven.yujianfeng@hisilicon.com>
Tested-by: John Stultz <john.stultz@linaro.org>
---
drivers/scsi/ufs/Kconfig | 9 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufs-hisi.c | 619 ++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufs-hisi.h | 115 ++++++++
4 files changed, 744 insertions(+)
create mode 100644 drivers/scsi/ufs/ufs-hisi.c
create mode 100644 drivers/scsi/ufs/ufs-hisi.h
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index e27b4d4e6ae2..e09fe6ab3572 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -100,3 +100,12 @@ config SCSI_UFS_QCOM
Select this if you have UFS controller on QCOM chipset.
If unsure, say N.
+
+config SCSI_UFS_HISI
+ tristate "Hisilicon specific hooks to UFS controller platform driver"
+ depends on (ARCH_HISI || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM
+ ---help---
+ This selects the Hisilicon specific additions to UFSHCD platform driver.
+
+ Select this if you have UFS controller on Hisilicon chipset.
+ If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 918f5791202d..2c50f03d8c4a 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
ufshcd-core-objs := ufshcd.o ufs-sysfs.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
+obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
new file mode 100644
index 000000000000..46df707e6f2c
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -0,0 +1,619 @@
+/*
+ * HiSilicon Hixxxx UFS Driver
+ *
+ * Copyright (c) 2016-2017 Linaro Ltd.
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "ufshcd.h"
+#include "ufshcd-pltfrm.h"
+#include "unipro.h"
+#include "ufs-hisi.h"
+#include "ufshci.h"
+
+static int ufs_hisi_check_hibern8(struct ufs_hba *hba)
+{
+ int err = 0;
+ u32 tx_fsm_val_0 = 0;
+ u32 tx_fsm_val_1 = 0;
+ unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
+
+ do {
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 0),
+ &tx_fsm_val_0);
+ err |= ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 1), &tx_fsm_val_1);
+ if (err || (tx_fsm_val_0 == TX_FSM_HIBERN8 &&
+ tx_fsm_val_1 == TX_FSM_HIBERN8))
+ break;
+
+ /* sleep for max. 200us */
+ usleep_range(100, 200);
+ } while (time_before(jiffies, timeout));
+
+ /*
+ * we might have scheduled out for long during polling so
+ * check the state again.
+ */
+ if (time_after(jiffies, timeout)) {
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 0),
+ &tx_fsm_val_0);
+ err |= ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 1), &tx_fsm_val_1);
+ }
+
+ if (err) {
+ dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
+ __func__, err);
+ } else if (tx_fsm_val_0 != TX_FSM_HIBERN8 ||
+ tx_fsm_val_1 != TX_FSM_HIBERN8) {
+ err = -1;
+ dev_err(hba->dev, "%s: invalid TX_FSM_STATE, lane0 = %d, lane1 = %d\n",
+ __func__, tx_fsm_val_0, tx_fsm_val_1);
+ }
+
+ return err;
+}
+
+static void ufs_hi3660_clk_init(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+ if (ufs_sys_ctrl_readl(host, PHY_CLK_CTRL) & BIT_SYSCTRL_REF_CLOCK_EN)
+ mdelay(1);
+ /* use abb clk */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_REFCLK_SRC_SEl, UFS_SYSCTRL);
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_REFCLK_ISO_EN, PHY_ISO_EN);
+ /* open mphy ref clk */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+}
+
+static void ufs_hi3660_soc_init(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+ u32 reg;
+
+ if (!IS_ERR(host->rst))
+ reset_control_assert(host->rst);
+
+ /* HC_PSW powerup */
+ ufs_sys_ctrl_set_bits(host, BIT_UFS_PSW_MTCMOS_EN, PSW_POWER_CTRL);
+ udelay(10);
+ /* notify PWR ready */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_PWR_READY, HC_LP_CTRL);
+ ufs_sys_ctrl_writel(host, MASK_UFS_DEVICE_RESET | 0,
+ UFS_DEVICE_RESET_CTRL);
+
+ reg = ufs_sys_ctrl_readl(host, PHY_CLK_CTRL);
+ reg = (reg & ~MASK_SYSCTRL_CFG_CLOCK_FREQ) | UFS_FREQ_CFG_CLK;
+ /* set cfg clk freq */
+ ufs_sys_ctrl_writel(host, reg, PHY_CLK_CTRL);
+ /* set ref clk freq */
+ ufs_sys_ctrl_clr_bits(host, MASK_SYSCTRL_REF_CLOCK_SEL, PHY_CLK_CTRL);
+ /* bypass ufs clk gate */
+ ufs_sys_ctrl_set_bits(host, MASK_UFS_CLK_GATE_BYPASS,
+ CLOCK_GATE_BYPASS);
+ ufs_sys_ctrl_set_bits(host, MASK_UFS_SYSCRTL_BYPASS, UFS_SYSCTRL);
+
+ /* open psw clk */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_PSW_CLK_EN, PSW_CLK_CTRL);
+ /* disable ufshc iso */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_PSW_ISO_CTRL, PSW_POWER_CTRL);
+ /* disable phy iso */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_PHY_ISO_CTRL, PHY_ISO_EN);
+ /* notice iso disable */
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_LP_ISOL_EN, HC_LP_CTRL);
+
+ /* disable lp_reset_n */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_LP_RESET_N, RESET_CTRL_EN);
+ mdelay(1);
+
+ ufs_sys_ctrl_writel(host, MASK_UFS_DEVICE_RESET | BIT_UFS_DEVICE_RESET,
+ UFS_DEVICE_RESET_CTRL);
+
+ msleep(20);
+
+ /*
+ * enable the fix of linereset recovery,
+ * and enable rx_reset/tx_rest beat
+ * enable ref_clk_en override(bit5) &
+ * override value = 1(bit4), with mask
+ */
+ ufs_sys_ctrl_writel(host, 0x03300330, UFS_DEVICE_RESET_CTRL);
+
+ if (!IS_ERR(host->rst))
+ reset_control_deassert(host->rst);
+}
+
+static int ufs_hisi_link_startup_pre_change(struct ufs_hba *hba)
+{
+ int err;
+ uint32_t value;
+ uint32_t reg;
+
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), 0x1);
+ /* PA_HSSeries */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x156A, 0x0), 0x2);
+ /* MPHY CBRATESEL */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8114, 0x0), 0x1);
+ /* MPHY CBOVRCTRL2 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8121, 0x0), 0x2D);
+ /* MPHY CBOVRCTRL3 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8122, 0x0), 0x1);
+ /* Unipro VS_MphyCfgUpdt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+ /* MPHY RXOVRCTRL4 rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800D, 0x4), 0x58);
+ /* MPHY RXOVRCTRL4 rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800D, 0x5), 0x58);
+ /* MPHY RXOVRCTRL5 rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800E, 0x4), 0xB);
+ /* MPHY RXOVRCTRL5 rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800E, 0x5), 0xB);
+ /* MPHY RXSQCONTROL rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8009, 0x4), 0x1);
+ /* MPHY RXSQCONTROL rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8009, 0x5), 0x1);
+ /* Unipro VS_MphyCfgUpdt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8113, 0x0), 0x1);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+
+ /* Tactive RX */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008F, 0x4), 0x7);
+ /* Tactive RX */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008F, 0x5), 0x7);
+
+ /* Gear3 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0095, 0x4), 0x4F);
+ /* Gear3 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0095, 0x5), 0x4F);
+ /* Gear2 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0094, 0x4), 0x4F);
+ /* Gear2 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0094, 0x5), 0x4F);
+ /* Gear1 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008B, 0x4), 0x4F);
+ /* Gear1 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008B, 0x5), 0x4F);
+ /* Thibernate Tx */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x000F, 0x0), 0x5);
+ /* Thibernate Tx */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x000F, 0x1), 0x5);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), &value);
+ if (value != 0x1)
+ dev_info(hba->dev,
+ "Warring!!! Unipro VS_mphy_disable is 0x%x\n", value);
+
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), 0x0);
+ err = ufs_hisi_check_hibern8(hba);
+ if (err)
+ dev_err(hba->dev, "ufs_hisi_check_hibern8 error\n");
+
+ ufshcd_writel(hba, UFS_HCLKDIV_NORMAL_VALUE, UFS_REG_HCLKDIV);
+
+ /* disable auto H8 */
+ reg = ufshcd_readl(hba, REG_AUTO_HIBERNATE_IDLE_TIMER);
+ reg = reg & (~UFS_AHIT_AH8ITV_MASK);
+ ufshcd_writel(hba, reg, REG_AUTO_HIBERNATE_IDLE_TIMER);
+
+ /* Unipro PA_Local_TX_LCC_Enable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x155E, 0x0), 0x0);
+ /* close Unipro VS_Mk2ExtnSupport */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), 0x0);
+ ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), &value);
+ if (value != 0) {
+ /* Ensure close success */
+ dev_info(hba->dev, "WARN: close VS_Mk2ExtnSupport failed\n");
+ }
+
+ return err;
+}
+
+static int ufs_hisi_link_startup_post_change(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ /* Unipro DL_AFC0CreditThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2044), 0x0);
+ /* Unipro DL_TC0OutAckThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2045), 0x0);
+ /* Unipro DL_TC0TXFCThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2040), 0x9);
+
+ /* not bypass ufs clk gate */
+ ufs_sys_ctrl_clr_bits(host, MASK_UFS_CLK_GATE_BYPASS,
+ CLOCK_GATE_BYPASS);
+ ufs_sys_ctrl_clr_bits(host, MASK_UFS_SYSCRTL_BYPASS,
+ UFS_SYSCTRL);
+
+ /* select received symbol cnt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd09a), 0x80000000);
+ /* reset counter0 and enable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd09c), 0x00000005);
+
+ return 0;
+}
+
+static int ufs_hi3660_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ int err = 0;
+
+ switch (status) {
+ case PRE_CHANGE:
+ err = ufs_hisi_link_startup_pre_change(hba);
+ break;
+ case POST_CHANGE:
+ err = ufs_hisi_link_startup_post_change(hba);
+ break;
+ default:
+ break;
+ }
+
+ return err;
+}
+
+struct ufs_hisi_dev_params {
+ u32 pwm_rx_gear; /* pwm rx gear to work in */
+ u32 pwm_tx_gear; /* pwm tx gear to work in */
+ u32 hs_rx_gear; /* hs rx gear to work in */
+ u32 hs_tx_gear; /* hs tx gear to work in */
+ u32 rx_lanes; /* number of rx lanes */
+ u32 tx_lanes; /* number of tx lanes */
+ u32 rx_pwr_pwm; /* rx pwm working pwr */
+ u32 tx_pwr_pwm; /* tx pwm working pwr */
+ u32 rx_pwr_hs; /* rx hs working pwr */
+ u32 tx_pwr_hs; /* tx hs working pwr */
+ u32 hs_rate; /* rate A/B to work in HS */
+ u32 desired_working_mode;
+};
+
+static int ufs_hisi_get_pwr_dev_param(
+ struct ufs_hisi_dev_params *hisi_param,
+ struct ufs_pa_layer_attr *dev_max,
+ struct ufs_pa_layer_attr *agreed_pwr)
+{
+ int min_hisi_gear;
+ int min_dev_gear;
+ bool is_dev_sup_hs = false;
+ bool is_hisi_max_hs = false;
+
+ if (dev_max->pwr_rx == FASTAUTO_MODE || dev_max->pwr_rx == FAST_MODE)
+ is_dev_sup_hs = true;
+
+ if (hisi_param->desired_working_mode == FAST) {
+ is_hisi_max_hs = true;
+ min_hisi_gear = min_t(u32, hisi_param->hs_rx_gear,
+ hisi_param->hs_tx_gear);
+ } else {
+ min_hisi_gear = min_t(u32, hisi_param->pwm_rx_gear,
+ hisi_param->pwm_tx_gear);
+ }
+
+ /*
+ * device doesn't support HS but
+ * hisi_param->desired_working_mode is HS,
+ * thus device and hisi_param don't agree
+ */
+ if (!is_dev_sup_hs && is_hisi_max_hs) {
+ pr_err("%s: device not support HS\n", __func__);
+ return -ENOTSUPP;
+ } else if (is_dev_sup_hs && is_hisi_max_hs) {
+ /*
+ * since device supports HS, it supports FAST_MODE.
+ * since hisi_param->desired_working_mode is also HS
+ * then final decision (FAST/FASTAUTO) is done according
+ * to hisi_params as it is the restricting factor
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ hisi_param->rx_pwr_hs;
+ } else {
+ /*
+ * here hisi_param->desired_working_mode is PWM.
+ * it doesn't matter whether device supports HS or PWM,
+ * in both cases hisi_param->desired_working_mode will
+ * determine the mode
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ hisi_param->rx_pwr_pwm;
+ }
+
+ /*
+ * we would like tx to work in the minimum number of lanes
+ * between device capability and vendor preferences.
+ * the same decision will be made for rx
+ */
+ agreed_pwr->lane_tx =
+ min_t(u32, dev_max->lane_tx, hisi_param->tx_lanes);
+ agreed_pwr->lane_rx =
+ min_t(u32, dev_max->lane_rx, hisi_param->rx_lanes);
+
+ /* device maximum gear is the minimum between device rx and tx gears */
+ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+ /*
+ * if both device capabilities and vendor pre-defined preferences are
+ * both HS or both PWM then set the minimum gear to be the chosen
+ * working gear.
+ * if one is PWM and one is HS then the one that is PWM get to decide
+ * what is the gear, as it is the one that also decided previously what
+ * pwr the device will be configured to.
+ */
+ if ((is_dev_sup_hs && is_hisi_max_hs) ||
+ (!is_dev_sup_hs && !is_hisi_max_hs))
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx =
+ min_t(u32, min_dev_gear, min_hisi_gear);
+ else
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_hisi_gear;
+
+ agreed_pwr->hs_rate = hisi_param->hs_rate;
+
+ pr_info("ufs final power mode: gear = %d, lane = %d, pwr = %d, rate = %d\n",
+ agreed_pwr->gear_rx, agreed_pwr->lane_rx, agreed_pwr->pwr_rx,
+ agreed_pwr->hs_rate);
+ return 0;
+}
+
+static void ufs_hisi_set_dev_cap(struct ufs_hisi_dev_params *hisi_param)
+{
+ hisi_param->rx_lanes = UFS_HISI_LIMIT_NUM_LANES_RX;
+ hisi_param->tx_lanes = UFS_HISI_LIMIT_NUM_LANES_TX;
+ hisi_param->hs_rx_gear = UFS_HISI_LIMIT_HSGEAR_RX;
+ hisi_param->hs_tx_gear = UFS_HISI_LIMIT_HSGEAR_TX;
+ hisi_param->pwm_rx_gear = UFS_HISI_LIMIT_PWMGEAR_RX;
+ hisi_param->pwm_tx_gear = UFS_HISI_LIMIT_PWMGEAR_TX;
+ hisi_param->rx_pwr_pwm = UFS_HISI_LIMIT_RX_PWR_PWM;
+ hisi_param->tx_pwr_pwm = UFS_HISI_LIMIT_TX_PWR_PWM;
+ hisi_param->rx_pwr_hs = UFS_HISI_LIMIT_RX_PWR_HS;
+ hisi_param->tx_pwr_hs = UFS_HISI_LIMIT_TX_PWR_HS;
+ hisi_param->hs_rate = UFS_HISI_LIMIT_HS_RATE;
+ hisi_param->desired_working_mode = UFS_HISI_LIMIT_DESIRED_MODE;
+}
+
+static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba)
+{
+ /* update */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A8), 0x1);
+ /* PA_TxSkip */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x155c), 0x0);
+ /*PA_PWRModeUserData0 = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b0), 8191);
+ /*PA_PWRModeUserData1 = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b1), 65535);
+ /*PA_PWRModeUserData2 = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b2), 32767);
+ /*DME_FC0ProtectionTimeOutVal = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd041), 8191);
+ /*DME_TC0ReplayTimeOutVal = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd042), 65535);
+ /*DME_AFC0ReqTimeOutVal = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd043), 32767);
+ /*PA_PWRModeUserData3 = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b3), 8191);
+ /*PA_PWRModeUserData4 = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b4), 65535);
+ /*PA_PWRModeUserData5 = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b5), 32767);
+ /*DME_FC1ProtectionTimeOutVal = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd044), 8191);
+ /*DME_TC1ReplayTimeOutVal = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd045), 65535);
+ /*DME_AFC1ReqTimeOutVal = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd046), 32767);
+}
+
+static int ufs_hi3660_pwr_change_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status,
+ struct ufs_pa_layer_attr *dev_max_params,
+ struct ufs_pa_layer_attr *dev_req_params)
+{
+ struct ufs_hisi_dev_params ufs_hisi_cap;
+ int ret = 0;
+
+ if (!dev_req_params) {
+ dev_err(hba->dev,
+ "%s: incoming dev_req_params is NULL\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_hisi_set_dev_cap(&ufs_hisi_cap);
+ ret = ufs_hisi_get_pwr_dev_param(
+ &ufs_hisi_cap, dev_max_params, dev_req_params);
+ if (ret) {
+ dev_err(hba->dev,
+ "%s: failed to determine capabilities\n", __func__);
+ goto out;
+ }
+
+ ufs_hisi_pwr_change_pre_change(hba);
+ break;
+ case POST_CHANGE:
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+out:
+ return ret;
+}
+
+static int ufs_hisi_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ if (ufshcd_is_runtime_pm(pm_op))
+ return 0;
+
+ if (host->in_suspend) {
+ WARN_ON(1);
+ return 0;
+ }
+
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+ udelay(10);
+ /* set ref_dig_clk override of PHY PCS to 0 */
+ ufs_sys_ctrl_writel(host, 0x00100000, UFS_DEVICE_RESET_CTRL);
+
+ host->in_suspend = true;
+
+ return 0;
+}
+
+static int ufs_hisi_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ if (!host->in_suspend)
+ return 0;
+
+ /* set ref_dig_clk override of PHY PCS to 1 */
+ ufs_sys_ctrl_writel(host, 0x00100010, UFS_DEVICE_RESET_CTRL);
+ udelay(10);
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+
+ host->in_suspend = false;
+ return 0;
+}
+
+static int ufs_hisi_get_resource(struct ufs_hisi_host *host)
+{
+ struct resource *mem_res;
+ struct device *dev = host->hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ /* get resource of ufs sys ctrl */
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ host->ufs_sys_ctrl = devm_ioremap_resource(dev, mem_res);
+ if (IS_ERR(host->ufs_sys_ctrl))
+ return PTR_ERR(host->ufs_sys_ctrl);
+
+ return 0;
+}
+
+static void ufs_hisi_set_pm_lvl(struct ufs_hba *hba)
+{
+ hba->rpm_lvl = UFS_PM_LVL_1;
+ hba->spm_lvl = UFS_PM_LVL_3;
+}
+
+/**
+ * ufs_hisi_init_common
+ * @hba: host controller instance
+ */
+static int ufs_hisi_init_common(struct ufs_hba *hba)
+{
+ int err = 0;
+ struct device *dev = hba->dev;
+ struct ufs_hisi_host *host;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ host->hba = hba;
+ ufshcd_set_variant(hba, host);
+
+ host->rst = devm_reset_control_get(dev, "rst");
+
+ ufs_hisi_set_pm_lvl(hba);
+
+ err = ufs_hisi_get_resource(host);
+ if (err) {
+ ufshcd_set_variant(hba, NULL);
+ return err;
+ }
+
+ return 0;
+}
+
+static int ufs_hi3660_init(struct ufs_hba *hba)
+{
+ int ret = 0;
+ struct device *dev = hba->dev;
+
+ ret = ufs_hisi_init_common(hba);
+ if (ret) {
+ dev_err(dev, "%s: ufs common init fail\n", __func__);
+ return ret;
+ }
+
+ ufs_hi3660_clk_init(hba);
+
+ ufs_hi3660_soc_init(hba);
+
+ return 0;
+}
+
+static struct ufs_hba_variant_ops ufs_hba_hisi_vops = {
+ .name = "hi3660",
+ .init = ufs_hi3660_init,
+ .link_startup_notify = ufs_hi3660_link_startup_notify,
+ .pwr_change_notify = ufs_hi3660_pwr_change_notify,
+ .suspend = ufs_hisi_suspend,
+ .resume = ufs_hisi_resume,
+};
+
+static int ufs_hisi_probe(struct platform_device *pdev)
+{
+ return ufshcd_pltfrm_init(pdev, &ufs_hba_hisi_vops);
+}
+
+static int ufs_hisi_remove(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ ufshcd_remove(hba);
+ return 0;
+}
+
+static const struct of_device_id ufs_hisi_of_match[] = {
+ { .compatible = "hisilicon,hi3660-ufs" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, ufs_hisi_of_match);
+
+static const struct dev_pm_ops ufs_hisi_pm_ops = {
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+ .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+ .runtime_resume = ufshcd_pltfrm_runtime_resume,
+ .runtime_idle = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver ufs_hisi_pltform = {
+ .probe = ufs_hisi_probe,
+ .remove = ufs_hisi_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
+ .driver = {
+ .name = "ufshcd-hisi",
+ .pm = &ufs_hisi_pm_ops,
+ .of_match_table = of_match_ptr(ufs_hisi_of_match),
+ },
+};
+module_platform_driver(ufs_hisi_pltform);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ufshcd-hisi");
+MODULE_DESCRIPTION("HiSilicon Hixxxx UFS Driver");
diff --git a/drivers/scsi/ufs/ufs-hisi.h b/drivers/scsi/ufs/ufs-hisi.h
new file mode 100644
index 000000000000..3df9cd7acc29
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-hisi.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2017, HiSilicon. All rights reserved.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef UFS_HISI_H_
+#define UFS_HISI_H_
+
+#define HBRN8_POLL_TOUT_MS 1000
+
+/*
+ * ufs sysctrl specific define
+ */
+#define PSW_POWER_CTRL (0x04)
+#define PHY_ISO_EN (0x08)
+#define HC_LP_CTRL (0x0C)
+#define PHY_CLK_CTRL (0x10)
+#define PSW_CLK_CTRL (0x14)
+#define CLOCK_GATE_BYPASS (0x18)
+#define RESET_CTRL_EN (0x1C)
+#define UFS_SYSCTRL (0x5C)
+#define UFS_DEVICE_RESET_CTRL (0x60)
+
+#define BIT_UFS_PSW_ISO_CTRL (1 << 16)
+#define BIT_UFS_PSW_MTCMOS_EN (1 << 0)
+#define BIT_UFS_REFCLK_ISO_EN (1 << 16)
+#define BIT_UFS_PHY_ISO_CTRL (1 << 0)
+#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16)
+#define BIT_SYSCTRL_PWR_READY (1 << 8)
+#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24)
+#define MASK_SYSCTRL_REF_CLOCK_SEL (0x3 << 8)
+#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF)
+#define UFS_FREQ_CFG_CLK (0x39)
+#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4)
+#define MASK_UFS_CLK_GATE_BYPASS (0x3F)
+#define BIT_SYSCTRL_LP_RESET_N (1 << 0)
+#define BIT_UFS_REFCLK_SRC_SEl (1 << 0)
+#define MASK_UFS_SYSCRTL_BYPASS (0x3F << 16)
+#define MASK_UFS_DEVICE_RESET (0x1 << 16)
+#define BIT_UFS_DEVICE_RESET (0x1)
+
+/*
+ * M-TX Configuration Attributes for Hixxxx
+ */
+#define MPHY_TX_FSM_STATE 0x41
+#define TX_FSM_HIBERN8 0x1
+
+/*
+ * Hixxxx UFS HC specific Registers
+ */
+enum {
+ UFS_REG_OCPTHRTL = 0xc0,
+ UFS_REG_OOCPR = 0xc4,
+
+ UFS_REG_CDACFG = 0xd0,
+ UFS_REG_CDATX1 = 0xd4,
+ UFS_REG_CDATX2 = 0xd8,
+ UFS_REG_CDARX1 = 0xdc,
+ UFS_REG_CDARX2 = 0xe0,
+ UFS_REG_CDASTA = 0xe4,
+
+ UFS_REG_LBMCFG = 0xf0,
+ UFS_REG_LBMSTA = 0xf4,
+ UFS_REG_UFSMODE = 0xf8,
+
+ UFS_REG_HCLKDIV = 0xfc,
+};
+
+/* AHIT - Auto-Hibernate Idle Timer */
+#define UFS_AHIT_AH8ITV_MASK 0x3FF
+
+/* REG UFS_REG_OCPTHRTL definition */
+#define UFS_HCLKDIV_NORMAL_VALUE 0xE4
+
+/* vendor specific pre-defined parameters */
+#define SLOW 1
+#define FAST 2
+
+#define UFS_HISI_LIMIT_NUM_LANES_RX 2
+#define UFS_HISI_LIMIT_NUM_LANES_TX 2
+#define UFS_HISI_LIMIT_HSGEAR_RX UFS_HS_G3
+#define UFS_HISI_LIMIT_HSGEAR_TX UFS_HS_G3
+#define UFS_HISI_LIMIT_PWMGEAR_RX UFS_PWM_G4
+#define UFS_HISI_LIMIT_PWMGEAR_TX UFS_PWM_G4
+#define UFS_HISI_LIMIT_RX_PWR_PWM SLOW_MODE
+#define UFS_HISI_LIMIT_TX_PWR_PWM SLOW_MODE
+#define UFS_HISI_LIMIT_RX_PWR_HS FAST_MODE
+#define UFS_HISI_LIMIT_TX_PWR_HS FAST_MODE
+#define UFS_HISI_LIMIT_HS_RATE PA_HS_MODE_B
+#define UFS_HISI_LIMIT_DESIRED_MODE FAST
+
+struct ufs_hisi_host {
+ struct ufs_hba *hba;
+ void __iomem *ufs_sys_ctrl;
+
+ struct reset_control *rst;
+
+ uint64_t caps;
+
+ bool in_suspend;
+};
+
+#define ufs_sys_ctrl_writel(host, val, reg) \
+ writel((val), (host)->ufs_sys_ctrl + (reg))
+#define ufs_sys_ctrl_readl(host, reg) readl((host)->ufs_sys_ctrl + (reg))
+#define ufs_sys_ctrl_set_bits(host, mask, reg) \
+ ufs_sys_ctrl_writel( \
+ (host), ((mask) | (ufs_sys_ctrl_readl((host), (reg)))), (reg))
+#define ufs_sys_ctrl_clr_bits(host, mask, reg) \
+ ufs_sys_ctrl_writel((host), \
+ ((~(mask)) & (ufs_sys_ctrl_readl((host), (reg)))), \
+ (reg))
+#endif /* UFS_HISI_H_ */
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 2/4] [RESEND] dt-bindings: scsi: ufs: add document for hisi-ufs
2018-07-17 9:36 ` Li Wei
(?)
@ 2018-07-17 9:36 ` Li Wei
-1 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi
Cc: zangleigang, gengjianfeng, sunzhaosheng, ian.rickards,
guodong.xu, puck.chen, john.stultz, liwei213, fengbaopeng
add ufs node document for Hisilicon.
Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 41 ++++++++++++++++++++++
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 10 ++++--
2 files changed, 48 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
new file mode 100644
index 000000000000..a48c44817367
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
@@ -0,0 +1,41 @@
+* Hisilicon Universal Flash Storage (UFS) Host Controller
+
+UFS nodes are defined to describe on-chip UFS hardware macro.
+Each UFS Host Controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains one of the following -
+ "hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
+ host controller present on Hi36xx chipset.
+- reg : should contain UFS register address space & UFS SYS CTRL register address,
+- interrupt-parent : interrupt device
+- interrupts : interrupt number
+- clocks : List of phandle and clock specifier pairs
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property. "ref_clk", "phy_clk" is optional
+- freq-table-hz : Array of <min max> operating frequencies stored in the same
+ order as the clocks property. If this property is not
+ defined or a value in the array is "0" then it is assumed
+ that the frequency is set by the parent clock or a
+ fixed rate clock source.
+- resets : describe reset node register
+- reset-names : reset node register, the "rst" corresponds to reset the whole UFS IP.
+
+Example:
+
+ ufs: ufs@ff3b0000 {
+ compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+ /* 0: HCI standard */
+ /* 1: UFS SYS CTRL */
+ reg = <0x0 0xff3b0000 0x0 0x1000>,
+ <0x0 0xff3b1000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+ clock-names = "ref_clk", "phy_clk";
+ freq-table-hz = <0 0>, <0 0>;
+ /* offset: 0x84; bit: 12 */
+ resets = <&crg_rst 0x84 12>;
+ reset-names = "rst";
+ };
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index c39dfef76a18..2df00524bd21 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -41,6 +41,8 @@ Optional properties:
-lanes-per-direction : number of lanes available per direction - either 1 or 2.
Note that it is assume same number of lanes is used both
directions at once. If not specified, default is 2 lanes per direction.
+- resets : reset node register
+- reset-names : describe reset node register, the "rst" corresponds to reset the whole UFS IP.
Note: If above properties are not defined it can be assumed that the supply
regulators or clocks are always on.
@@ -61,9 +63,11 @@ Example:
vccq-max-microamp = 200000;
vccq2-max-microamp = 200000;
- clocks = <&core 0>, <&ref 0>, <&iface 0>;
- clock-names = "core_clk", "ref_clk", "iface_clk";
- freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
+ clocks = <&core 0>, <&ref 0>, <&phy 0>, <&iface 0>;
+ clock-names = "core_clk", "ref_clk", "phy_clk", "iface_clk";
+ freq-table-hz = <100000000 200000000>, <0 0>, <0 0>, <0 0>;
+ resets = <&reset 0 1>;
+ reset-names = "rst";
phys = <&ufsphy1>;
phy-names = "ufsphy";
};
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 2/4] [RESEND] dt-bindings: scsi: ufs: add document for hisi-ufs
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi
Cc: zangleigang, gengjianfeng, sunzhaosheng, ian.rickards,
guodong.xu, puck.chen, john.stultz, liwei213, fengbaopeng
add ufs node document for Hisilicon.
Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 41 ++++++++++++++++++++++
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 10 ++++--
2 files changed, 48 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
new file mode 100644
index 000000000000..a48c44817367
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
@@ -0,0 +1,41 @@
+* Hisilicon Universal Flash Storage (UFS) Host Controller
+
+UFS nodes are defined to describe on-chip UFS hardware macro.
+Each UFS Host Controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains one of the following -
+ "hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
+ host controller present on Hi36xx chipset.
+- reg : should contain UFS register address space & UFS SYS CTRL register address,
+- interrupt-parent : interrupt device
+- interrupts : interrupt number
+- clocks : List of phandle and clock specifier pairs
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property. "ref_clk", "phy_clk" is optional
+- freq-table-hz : Array of <min max> operating frequencies stored in the same
+ order as the clocks property. If this property is not
+ defined or a value in the array is "0" then it is assumed
+ that the frequency is set by the parent clock or a
+ fixed rate clock source.
+- resets : describe reset node register
+- reset-names : reset node register, the "rst" corresponds to reset the whole UFS IP.
+
+Example:
+
+ ufs: ufs@ff3b0000 {
+ compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+ /* 0: HCI standard */
+ /* 1: UFS SYS CTRL */
+ reg = <0x0 0xff3b0000 0x0 0x1000>,
+ <0x0 0xff3b1000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+ clock-names = "ref_clk", "phy_clk";
+ freq-table-hz = <0 0>, <0 0>;
+ /* offset: 0x84; bit: 12 */
+ resets = <&crg_rst 0x84 12>;
+ reset-names = "rst";
+ };
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index c39dfef76a18..2df00524bd21 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -41,6 +41,8 @@ Optional properties:
-lanes-per-direction : number of lanes available per direction - either 1 or 2.
Note that it is assume same number of lanes is used both
directions at once. If not specified, default is 2 lanes per direction.
+- resets : reset node register
+- reset-names : describe reset node register, the "rst" corresponds to reset the whole UFS IP.
Note: If above properties are not defined it can be assumed that the supply
regulators or clocks are always on.
@@ -61,9 +63,11 @@ Example:
vccq-max-microamp = 200000;
vccq2-max-microamp = 200000;
- clocks = <&core 0>, <&ref 0>, <&iface 0>;
- clock-names = "core_clk", "ref_clk", "iface_clk";
- freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
+ clocks = <&core 0>, <&ref 0>, <&phy 0>, <&iface 0>;
+ clock-names = "core_clk", "ref_clk", "phy_clk", "iface_clk";
+ freq-table-hz = <100000000 200000000>, <0 0>, <0 0>, <0 0>;
+ resets = <&reset 0 1>;
+ reset-names = "rst";
phys = <&ufsphy1>;
phy-names = "ufsphy";
};
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 2/4] [RESEND] dt-bindings: scsi: ufs: add document for hisi-ufs
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: linux-arm-kernel
add ufs node document for Hisilicon.
Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 41 ++++++++++++++++++++++
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 10 ++++--
2 files changed, 48 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
new file mode 100644
index 000000000000..a48c44817367
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
@@ -0,0 +1,41 @@
+* Hisilicon Universal Flash Storage (UFS) Host Controller
+
+UFS nodes are defined to describe on-chip UFS hardware macro.
+Each UFS Host Controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains one of the following -
+ "hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
+ host controller present on Hi36xx chipset.
+- reg : should contain UFS register address space & UFS SYS CTRL register address,
+- interrupt-parent : interrupt device
+- interrupts : interrupt number
+- clocks : List of phandle and clock specifier pairs
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property. "ref_clk", "phy_clk" is optional
+- freq-table-hz : Array of <min max> operating frequencies stored in the same
+ order as the clocks property. If this property is not
+ defined or a value in the array is "0" then it is assumed
+ that the frequency is set by the parent clock or a
+ fixed rate clock source.
+- resets : describe reset node register
+- reset-names : reset node register, the "rst" corresponds to reset the whole UFS IP.
+
+Example:
+
+ ufs: ufs at ff3b0000 {
+ compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+ /* 0: HCI standard */
+ /* 1: UFS SYS CTRL */
+ reg = <0x0 0xff3b0000 0x0 0x1000>,
+ <0x0 0xff3b1000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+ clock-names = "ref_clk", "phy_clk";
+ freq-table-hz = <0 0>, <0 0>;
+ /* offset: 0x84; bit: 12 */
+ resets = <&crg_rst 0x84 12>;
+ reset-names = "rst";
+ };
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index c39dfef76a18..2df00524bd21 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -41,6 +41,8 @@ Optional properties:
-lanes-per-direction : number of lanes available per direction - either 1 or 2.
Note that it is assume same number of lanes is used both
directions at once. If not specified, default is 2 lanes per direction.
+- resets : reset node register
+- reset-names : describe reset node register, the "rst" corresponds to reset the whole UFS IP.
Note: If above properties are not defined it can be assumed that the supply
regulators or clocks are always on.
@@ -61,9 +63,11 @@ Example:
vccq-max-microamp = 200000;
vccq2-max-microamp = 200000;
- clocks = <&core 0>, <&ref 0>, <&iface 0>;
- clock-names = "core_clk", "ref_clk", "iface_clk";
- freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
+ clocks = <&core 0>, <&ref 0>, <&phy 0>, <&iface 0>;
+ clock-names = "core_clk", "ref_clk", "phy_clk", "iface_clk";
+ freq-table-hz = <100000000 200000000>, <0 0>, <0 0>, <0 0>;
+ resets = <&reset 0 1>;
+ reset-names = "rst";
phys = <&ufsphy1>;
phy-names = "ufsphy";
};
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 3/4] [RESEND] arm64: dts: add ufs dts node
2018-07-17 9:36 ` Li Wei
(?)
@ 2018-07-17 9:36 ` Li Wei
-1 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi
Cc: zangleigang, gengjianfeng, sunzhaosheng, ian.rickards,
guodong.xu, puck.chen, john.stultz, liwei213, fengbaopeng
arm64: dts: add ufs node for Hisilicon.
Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 8d477dcbfa58..851190a719ea 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1000,6 +1000,24 @@
reset-gpios = <&gpio11 1 0 >;
};
+ /* UFS */
+ ufs: ufs@ff3b0000 {
+ compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+ /* 0: HCI standard */
+ /* 1: UFS SYS CTRL */
+ reg = <0x0 0xff3b0000 0x0 0x1000>,
+ <0x0 0xff3b1000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+ clock-names = "ref_clk", "phy_clk";
+ freq-table-hz = <0 0>, <0 0>;
+ /* offset: 0x84; bit: 12 */
+ resets = <&crg_rst 0x84 12>;
+ reset-names = "rst";
+ };
+
/* SD */
dwmmc1: dwmmc1@ff37f000 {
#address-cells = <1>;
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 3/4] [RESEND] arm64: dts: add ufs dts node
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi
Cc: zangleigang, gengjianfeng, sunzhaosheng, ian.rickards,
guodong.xu, puck.chen, john.stultz, liwei213, fengbaopeng
arm64: dts: add ufs node for Hisilicon.
Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 8d477dcbfa58..851190a719ea 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1000,6 +1000,24 @@
reset-gpios = <&gpio11 1 0 >;
};
+ /* UFS */
+ ufs: ufs@ff3b0000 {
+ compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+ /* 0: HCI standard */
+ /* 1: UFS SYS CTRL */
+ reg = <0x0 0xff3b0000 0x0 0x1000>,
+ <0x0 0xff3b1000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+ clock-names = "ref_clk", "phy_clk";
+ freq-table-hz = <0 0>, <0 0>;
+ /* offset: 0x84; bit: 12 */
+ resets = <&crg_rst 0x84 12>;
+ reset-names = "rst";
+ };
+
/* SD */
dwmmc1: dwmmc1@ff37f000 {
#address-cells = <1>;
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 3/4] [RESEND] arm64: dts: add ufs dts node
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: linux-arm-kernel
arm64: dts: add ufs node for Hisilicon.
Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 8d477dcbfa58..851190a719ea 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1000,6 +1000,24 @@
reset-gpios = <&gpio11 1 0 >;
};
+ /* UFS */
+ ufs: ufs at ff3b0000 {
+ compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+ /* 0: HCI standard */
+ /* 1: UFS SYS CTRL */
+ reg = <0x0 0xff3b0000 0x0 0x1000>,
+ <0x0 0xff3b1000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+ clock-names = "ref_clk", "phy_clk";
+ freq-table-hz = <0 0>, <0 0>;
+ /* offset: 0x84; bit: 12 */
+ resets = <&crg_rst 0x84 12>;
+ reset-names = "rst";
+ };
+
/* SD */
dwmmc1: dwmmc1 at ff37f000 {
#address-cells = <1>;
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 4/4] [RESEND] arm64: defconfig: enable configs for Hisilicon ufs
2018-07-17 9:36 ` Li Wei
(?)
@ 2018-07-17 9:36 ` Li Wei
-1 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi
Cc: zangleigang, gengjianfeng, sunzhaosheng, ian.rickards,
guodong.xu, puck.chen, john.stultz, liwei213, fengbaopeng
Signed-off-by: Li Wei <liwei213@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f9a186f6af8a..2c07e233012b 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -193,6 +193,7 @@ CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_PCI=y
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PLATFORM=m
+CONFIG_SCSI_UFS_HISI=y
CONFIG_SCSI_UFS_QCOM=m
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 4/4] [RESEND] arm64: defconfig: enable configs for Hisilicon ufs
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi
Cc: zangleigang, gengjianfeng, sunzhaosheng, ian.rickards,
guodong.xu, puck.chen, john.stultz, liwei213, fengbaopeng
Signed-off-by: Li Wei <liwei213@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f9a186f6af8a..2c07e233012b 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -193,6 +193,7 @@ CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_PCI=y
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PLATFORM=m
+CONFIG_SCSI_UFS_HISI=y
CONFIG_SCSI_UFS_QCOM=m
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v11 4/4] [RESEND] arm64: defconfig: enable configs for Hisilicon ufs
@ 2018-07-17 9:36 ` Li Wei
0 siblings, 0 replies; 24+ messages in thread
From: Li Wei @ 2018-07-17 9:36 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Li Wei <liwei213@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f9a186f6af8a..2c07e233012b 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -193,6 +193,7 @@ CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_PCI=y
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PLATFORM=m
+CONFIG_SCSI_UFS_HISI=y
CONFIG_SCSI_UFS_QCOM=m
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
--
2.15.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC
2018-07-17 9:36 ` Li Wei
(?)
@ 2018-07-18 18:58 ` John Stultz
-1 siblings, 0 replies; 24+ messages in thread
From: John Stultz @ 2018-07-18 18:58 UTC (permalink / raw)
To: Li Wei, martin.petersen, Vinayak Holikatti
Cc: Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, jejb,
Kevin Hilman, Arnd Bergmann, Gregory CLEMENT, Thomas Petazzoni,
yamada.masahiro, Riku Voipio, Thierry Reding,
Krzysztof Kozlowski,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, lkml,
linux-arm-kernel, linux-scsi, zangleigang, gengjianfeng,
Sunzhaosheng Sun(Zhaosheng),
Ian Rickards, Guodong Xu, Feng Chen, Fengbaopeng (kevin,
Kirin Solution Dept),
Wei Xu
On Tue, Jul 17, 2018 at 2:36 AM, Li Wei <liwei213@huawei.com> wrote:
> This patchset adds driver support for UFS for Hi3660 SoC. It is verified on HiKey960 board.
>
> Li Wei (4):
> scsi: ufs: add Hisilicon ufs driver code
> dt-bindings: scsi: ufs: add document for hisi-ufs
> arm64: dts: add ufs dts node
> arm64: defconfig: enable configs for Hisilicon ufs
>
> Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 41 ++
> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 10 +-
> arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 +
> arch/arm64/configs/defconfig | 1 +
> drivers/scsi/ufs/Kconfig | 9 +
> drivers/scsi/ufs/Makefile | 1 +
> drivers/scsi/ufs/ufs-hisi.c | 619 +++++++++++++++++++++
> drivers/scsi/ufs/ufs-hisi.h | 115 ++++
> 8 files changed, 811 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
> create mode 100644 drivers/scsi/ufs/ufs-hisi.c
> create mode 100644 drivers/scsi/ufs/ufs-hisi.h
Martin/Vinayak: Wanted to nudge either of you to see if you had any
further feedback or objections on this patchset? Its been a long slow
slog for this patch-set and getting it upstream will make the HiKey960
board much more useful for testing mainline kernels.
If you don't have objections, would you consider merging the scsi
driver and Acked dt-bindings via the scsi tree? Including the dts
changes too if Wei Xu (now cc'ed) acks it, would be helpful as well
(but that can go separately later if necessary).
The defconfig change isn't as important, so I suspect can be re-pushed
through the ARM maintainers later.
thanks
-john
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC
@ 2018-07-18 18:58 ` John Stultz
0 siblings, 0 replies; 24+ messages in thread
From: John Stultz @ 2018-07-18 18:58 UTC (permalink / raw)
To: Li Wei, martin.petersen, Vinayak Holikatti
Cc: Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, jejb,
Kevin Hilman, Arnd Bergmann, Gregory CLEMENT, Thomas Petazzoni,
yamada.masahiro, Riku Voipio, Thierry Reding,
Krzysztof Kozlowski,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, lkml,
linux-arm-kernel, linux-scsi, zangleigang, gengjianfeng
On Tue, Jul 17, 2018 at 2:36 AM, Li Wei <liwei213@huawei.com> wrote:
> This patchset adds driver support for UFS for Hi3660 SoC. It is verified on HiKey960 board.
>
> Li Wei (4):
> scsi: ufs: add Hisilicon ufs driver code
> dt-bindings: scsi: ufs: add document for hisi-ufs
> arm64: dts: add ufs dts node
> arm64: defconfig: enable configs for Hisilicon ufs
>
> Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 41 ++
> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 10 +-
> arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 +
> arch/arm64/configs/defconfig | 1 +
> drivers/scsi/ufs/Kconfig | 9 +
> drivers/scsi/ufs/Makefile | 1 +
> drivers/scsi/ufs/ufs-hisi.c | 619 +++++++++++++++++++++
> drivers/scsi/ufs/ufs-hisi.h | 115 ++++
> 8 files changed, 811 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
> create mode 100644 drivers/scsi/ufs/ufs-hisi.c
> create mode 100644 drivers/scsi/ufs/ufs-hisi.h
Martin/Vinayak: Wanted to nudge either of you to see if you had any
further feedback or objections on this patchset? Its been a long slow
slog for this patch-set and getting it upstream will make the HiKey960
board much more useful for testing mainline kernels.
If you don't have objections, would you consider merging the scsi
driver and Acked dt-bindings via the scsi tree? Including the dts
changes too if Wei Xu (now cc'ed) acks it, would be helpful as well
(but that can go separately later if necessary).
The defconfig change isn't as important, so I suspect can be re-pushed
through the ARM maintainers later.
thanks
-john
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC
@ 2018-07-18 18:58 ` John Stultz
0 siblings, 0 replies; 24+ messages in thread
From: John Stultz @ 2018-07-18 18:58 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 17, 2018 at 2:36 AM, Li Wei <liwei213@huawei.com> wrote:
> This patchset adds driver support for UFS for Hi3660 SoC. It is verified on HiKey960 board.
>
> Li Wei (4):
> scsi: ufs: add Hisilicon ufs driver code
> dt-bindings: scsi: ufs: add document for hisi-ufs
> arm64: dts: add ufs dts node
> arm64: defconfig: enable configs for Hisilicon ufs
>
> Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 41 ++
> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 10 +-
> arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 18 +
> arch/arm64/configs/defconfig | 1 +
> drivers/scsi/ufs/Kconfig | 9 +
> drivers/scsi/ufs/Makefile | 1 +
> drivers/scsi/ufs/ufs-hisi.c | 619 +++++++++++++++++++++
> drivers/scsi/ufs/ufs-hisi.h | 115 ++++
> 8 files changed, 811 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
> create mode 100644 drivers/scsi/ufs/ufs-hisi.c
> create mode 100644 drivers/scsi/ufs/ufs-hisi.h
Martin/Vinayak: Wanted to nudge either of you to see if you had any
further feedback or objections on this patchset? Its been a long slow
slog for this patch-set and getting it upstream will make the HiKey960
board much more useful for testing mainline kernels.
If you don't have objections, would you consider merging the scsi
driver and Acked dt-bindings via the scsi tree? Including the dts
changes too if Wei Xu (now cc'ed) acks it, would be helpful as well
(but that can go separately later if necessary).
The defconfig change isn't as important, so I suspect can be re-pushed
through the ARM maintainers later.
thanks
-john
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v11 3/4] [RESEND] arm64: dts: add ufs dts node
2018-07-17 9:36 ` Li Wei
(?)
@ 2018-07-19 9:40 ` x00249684
-1 siblings, 0 replies; 24+ messages in thread
From: x00249684 @ 2018-07-19 9:40 UTC (permalink / raw)
To: liwei213
Cc: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi, zangleigang, gengjianfeng, sunzhaosheng,
ian.rickards, guodong.xu, puck.chen, john.stultz, fengbaopeng
>From: Li Wei <liwei213@huawei.com>
>
>arm64: dts: add ufs node for Hisilicon.
>
>Signed-off-by: Li Wei <liwei213@huawei.com>
>Reviewed-by: Rob Herring <robh@kernel.org>
>Tested-by: John Stultz <john.stultz@linaro.org>
Fine to me. Thanks!
Acked-by: Wei Xu <xuwei5@hisilicon.com>
But it will not be so staightforward when applying the patch
since in the recent pull request the hi3660.dtsi has been tidied up.
If it makes inconvenient, I can apply it once the binding is merged.
Thanks!
Best Regards,
Wei
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v11 3/4] [RESEND] arm64: dts: add ufs dts node
@ 2018-07-19 9:40 ` x00249684
0 siblings, 0 replies; 24+ messages in thread
From: x00249684 @ 2018-07-19 9:40 UTC (permalink / raw)
To: liwei213
Cc: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi, zangleigang, gengjianfeng, sunzhaosheng,
ian.rickards, guodong.xu, puck.chen, john.stultz, fengbaopeng
>From: Li Wei <liwei213@huawei.com>
>
>arm64: dts: add ufs node for Hisilicon.
>
>Signed-off-by: Li Wei <liwei213@huawei.com>
>Reviewed-by: Rob Herring <robh@kernel.org>
>Tested-by: John Stultz <john.stultz@linaro.org>
Fine to me. Thanks!
Acked-by: Wei Xu <xuwei5@hisilicon.com>
But it will not be so staightforward when applying the patch
since in the recent pull request the hi3660.dtsi has been tidied up.
If it makes inconvenient, I can apply it once the binding is merged.
Thanks!
Best Regards,
Wei
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v11 3/4] [RESEND] arm64: dts: add ufs dts node
@ 2018-07-19 9:40 ` x00249684
0 siblings, 0 replies; 24+ messages in thread
From: x00249684 @ 2018-07-19 9:40 UTC (permalink / raw)
To: linux-arm-kernel
>From: Li Wei <liwei213@huawei.com>
>
>arm64: dts: add ufs node for Hisilicon.
>
>Signed-off-by: Li Wei <liwei213@huawei.com>
>Reviewed-by: Rob Herring <robh@kernel.org>
>Tested-by: John Stultz <john.stultz@linaro.org>
Fine to me. Thanks!
Acked-by: Wei Xu <xuwei5@hisilicon.com>
But it will not be so staightforward when applying the patch
since in the recent pull request the hi3660.dtsi has been tidied up.
If it makes inconvenient, I can apply it once the binding is merged.
Thanks!
Best Regards,
Wei
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC
2018-07-17 9:36 ` Li Wei
(?)
@ 2018-07-20 2:04 ` Martin K. Petersen
-1 siblings, 0 replies; 24+ messages in thread
From: Martin K. Petersen @ 2018-07-20 2:04 UTC (permalink / raw)
To: Li Wei
Cc: robh+dt, mark.rutland, catalin.marinas, will.deacon,
vinholikatti, jejb, martin.petersen, khilman, arnd,
gregory.clement, thomas.petazzoni, yamada.masahiro, riku.voipio,
treding, krzk, devicetree, linux-kernel, linux-arm-kernel,
linux-scsi, zangleigang, gengjianfeng, sunzhaosheng,
ian.rickards, guodong.xu, puck.chen, john.stultz, fengbaopeng
Li,
> This patchset adds driver support for UFS for Hi3660 SoC. It is
> verified on HiKey960 board.
Applied to 4.19/scsi-queue. Thank you!
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC
@ 2018-07-20 2:04 ` Martin K. Petersen
0 siblings, 0 replies; 24+ messages in thread
From: Martin K. Petersen @ 2018-07-20 2:04 UTC (permalink / raw)
To: Li Wei
Cc: mark.rutland, catalin.marinas, will.deacon, yamada.masahiro,
vinholikatti, jejb, linux-scsi, khilman, ian.rickards,
zangleigang, krzk, treding, devicetree, arnd, puck.chen,
fengbaopeng, robh+dt, john.stultz, gregory.clement, sunzhaosheng,
linux-arm-kernel, thomas.petazzoni, guodong.xu, martin.petersen,
riku.voipio, linux-kernel, gengjianfeng
Li,
> This patchset adds driver support for UFS for Hi3660 SoC. It is
> verified on HiKey960 board.
Applied to 4.19/scsi-queue. Thank you!
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC
@ 2018-07-20 2:04 ` Martin K. Petersen
0 siblings, 0 replies; 24+ messages in thread
From: Martin K. Petersen @ 2018-07-20 2:04 UTC (permalink / raw)
To: linux-arm-kernel
Li,
> This patchset adds driver support for UFS for Hi3660 SoC. It is
> verified on HiKey960 board.
Applied to 4.19/scsi-queue. Thank you!
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2018-07-20 2:05 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-17 9:36 [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC Li Wei
2018-07-17 9:36 ` Li Wei
2018-07-17 9:36 ` Li Wei
2018-07-17 9:36 ` [PATCH v11 1/4] [RESEND] scsi: ufs: add Hisilicon ufs driver code Li Wei
2018-07-17 9:36 ` Li Wei
2018-07-17 9:36 ` Li Wei
2018-07-17 9:36 ` [PATCH v11 2/4] [RESEND] dt-bindings: scsi: ufs: add document for hisi-ufs Li Wei
2018-07-17 9:36 ` Li Wei
2018-07-17 9:36 ` Li Wei
2018-07-17 9:36 ` [PATCH v11 3/4] [RESEND] arm64: dts: add ufs dts node Li Wei
2018-07-17 9:36 ` Li Wei
2018-07-17 9:36 ` Li Wei
2018-07-19 9:40 ` x00249684
2018-07-19 9:40 ` x00249684
2018-07-19 9:40 ` x00249684
2018-07-17 9:36 ` [PATCH v11 4/4] [RESEND] arm64: defconfig: enable configs for Hisilicon ufs Li Wei
2018-07-17 9:36 ` Li Wei
2018-07-17 9:36 ` Li Wei
2018-07-18 18:58 ` [PATCH v11 0/4] [RESEND] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC John Stultz
2018-07-18 18:58 ` John Stultz
2018-07-18 18:58 ` John Stultz
2018-07-20 2:04 ` Martin K. Petersen
2018-07-20 2:04 ` Martin K. Petersen
2018-07-20 2:04 ` Martin K. Petersen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.