[PATCH 00/13] hisi_sas: Misc improvements, bugfixes, etc.

[PATCH 00/13] hisi_sas: Misc improvements, bugfixes, etc.

[John Garry]

This patchset introduces some misc improvements, bugfixes,
and SoC workarounds for the driver, including:
- workaround for v2 hw reset with SATA disks attached
- LED SGPIO support for v3 hw
- Fix for error path in task_prep function
- change slot and disk allocation method to avoid
  unknown SoC bugs
- fix potential problem of removing the driver when
  a disk is mounted
- other more minor stuff

John Garry (1):
  scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()

Xiang Chen (5):
  scsi: hisi_sas: change slot index allocation mode
  scsi: hisi_sas: Change common allocation mode of device id
  scsi: hisi_sas: Reset disks when discovered
  scsi: hisi_sas: Create a scsi_host_template per HW module
  scsi: hisi_sas: Mark PHY as in reset for nexus reset

Xiaofei Tan (7):
  scsi: hisi_sas: Add LED feature for v3 hw
  scsi: hisi_sas: Init disks after controller reset
  scsi: hisi_sas: Try wait commands before before controller reset
  scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
  scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
  scsi: hisi_sas: Terminate STP reject quickly for v2 hw
  scsi: hisi_sas: Fix return value when get_free_slot() failed

 drivers/scsi/hisi_sas/hisi_sas.h       |  33 ++--
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 294 +++++++++++++++++++++++++++------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |  78 ++++-----
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c |  99 ++++++++---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 124 +++++++++++---
 5 files changed, 483 insertions(+), 145 deletions(-)

-- 
1.9.1

[PATCH 00/13] hisi_sas: Misc improvements, bugfixes, etc.

[John Garry]

This patchset introduces some misc improvements, bugfixes,
and SoC workarounds for the driver, including:
- workaround for v2 hw reset with SATA disks attached
- LED SGPIO support for v3 hw
- Fix for error path in task_prep function
- change slot and disk allocation method to avoid
  unknown SoC bugs
- fix potential problem of removing the driver when
  a disk is mounted
- other more minor stuff

John Garry (1):
  scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()

Xiang Chen (5):
  scsi: hisi_sas: change slot index allocation mode
  scsi: hisi_sas: Change common allocation mode of device id
  scsi: hisi_sas: Reset disks when discovered
  scsi: hisi_sas: Create a scsi_host_template per HW module
  scsi: hisi_sas: Mark PHY as in reset for nexus reset

Xiaofei Tan (7):
  scsi: hisi_sas: Add LED feature for v3 hw
  scsi: hisi_sas: Init disks after controller reset
  scsi: hisi_sas: Try wait commands before before controller reset
  scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
  scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
  scsi: hisi_sas: Terminate STP reject quickly for v2 hw
  scsi: hisi_sas: Fix return value when get_free_slot() failed

 drivers/scsi/hisi_sas/hisi_sas.h       |  33 ++--
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 294 +++++++++++++++++++++++++++------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |  78 ++++-----
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c |  99 ++++++++---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 124 +++++++++++---
 5 files changed, 483 insertions(+), 145 deletions(-)

-- 
1.9.1

[PATCH 01/13] scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()

[John Garry]

There is much common code and functionality between the
HW versions to set the PHY linkrate.

As such, this patch factors out the common code into
a generic function hisi_sas_phy_set_linkrate().

Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 29 +++++++++++++++++++++++++++-
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 35 ++++------------------------------
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 21 ++------------------
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 21 ++------------------
 4 files changed, 36 insertions(+), 70 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 39f694e..f822d6f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -866,6 +866,33 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
 	return hisi_sas_task_exec(task, gfp_flags, 0, NULL);
 }
 
+static void hisi_sas_phy_set_linkrate(struct hisi_hba *hisi_hba, int phy_no,
+			struct sas_phy_linkrates *r)
+{
+	struct sas_phy_linkrates _r;
+
+	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	enum sas_linkrate min, max;
+
+	if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+		max = sas_phy->phy->maximum_linkrate;
+		min = r->minimum_linkrate;
+	} else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+		max = r->maximum_linkrate;
+		min = sas_phy->phy->minimum_linkrate;
+	} else
+		return;
+
+	_r.maximum_linkrate = max;
+	_r.minimum_linkrate = min;
+
+	hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+	msleep(100);
+	hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, &_r);
+	hisi_hba->hw->phy_start(hisi_hba, phy_no);
+}
+
 static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
 				void *funcdata)
 {
@@ -889,7 +916,7 @@ static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
 		break;
 
 	case PHY_FUNC_SET_LINK_RATE:
-		hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, funcdata);
+		hisi_sas_phy_set_linkrate(hisi_hba, phy_no, funcdata);
 		break;
 	case PHY_FUNC_GET_EVENTS:
 		if (hisi_hba->hw->get_events) {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index abe175f..8fa79d0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -855,39 +855,12 @@ static enum sas_linkrate phy_get_max_linkrate_v1_hw(void)
 static void phy_set_linkrate_v1_hw(struct hisi_hba *hisi_hba, int phy_no,
 		struct sas_phy_linkrates *r)
 {
-	u32 prog_phy_link_rate =
-		hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
-	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-	int i;
-	enum sas_linkrate min, max;
-	u32 rate_mask = 0;
-
-	if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = sas_phy->phy->maximum_linkrate;
-		min = r->minimum_linkrate;
-	} else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = r->maximum_linkrate;
-		min = sas_phy->phy->minimum_linkrate;
-	} else
-		return;
-
-	sas_phy->phy->maximum_linkrate = max;
-	sas_phy->phy->minimum_linkrate = min;
-
-	max -= SAS_LINK_RATE_1_5_GBPS;
+	enum sas_linkrate max = r->maximum_linkrate;
+	u32 prog_phy_link_rate = 0x800;
 
-	for (i = 0; i <= max; i++)
-		rate_mask |= 1 << (i * 2);
-
-	prog_phy_link_rate &= ~0xff;
-	prog_phy_link_rate |= rate_mask;
-
-	disable_phy_v1_hw(hisi_hba, phy_no);
-	msleep(100);
+	prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
 	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
-			prog_phy_link_rate);
-	start_phy_v1_hw(hisi_hba, phy_no);
+			     prog_phy_link_rate);
 }
 
 static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 911bb76..fb0e966 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1600,29 +1600,12 @@ static enum sas_linkrate phy_get_max_linkrate_v2_hw(void)
 static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
 		struct sas_phy_linkrates *r)
 {
-	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-	enum sas_linkrate min, max;
+	enum sas_linkrate max = r->maximum_linkrate;
 	u32 prog_phy_link_rate = 0x800;
 
-	if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = sas_phy->phy->maximum_linkrate;
-		min = r->minimum_linkrate;
-	} else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = r->maximum_linkrate;
-		min = sas_phy->phy->minimum_linkrate;
-	} else
-		return;
-
-	sas_phy->phy->maximum_linkrate = max;
-	sas_phy->phy->minimum_linkrate = min;
 	prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
-
-	disable_phy_v2_hw(hisi_hba, phy_no);
-	msleep(100);
 	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
-			prog_phy_link_rate);
-	start_phy_v2_hw(hisi_hba, phy_no);
+			     prog_phy_link_rate);
 }
 
 static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index c013673..0a80a39 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1879,29 +1879,12 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
 static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no,
 		struct sas_phy_linkrates *r)
 {
-	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-	enum sas_linkrate min, max;
+	enum sas_linkrate max = r->maximum_linkrate;
 	u32 prog_phy_link_rate = 0x800;
 
-	if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = sas_phy->phy->maximum_linkrate;
-		min = r->minimum_linkrate;
-	} else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = r->maximum_linkrate;
-		min = sas_phy->phy->minimum_linkrate;
-	} else
-		return;
-
-	sas_phy->phy->maximum_linkrate = max;
-	sas_phy->phy->minimum_linkrate = min;
 	prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
-
-	disable_phy_v3_hw(hisi_hba, phy_no);
-	msleep(100);
 	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
-			prog_phy_link_rate);
-	start_phy_v3_hw(hisi_hba, phy_no);
+			     prog_phy_link_rate);
 }
 
 static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
-- 
1.9.1

[PATCH 01/13] scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()

[John Garry]

There is much common code and functionality between the
HW versions to set the PHY linkrate.

As such, this patch factors out the common code into
a generic function hisi_sas_phy_set_linkrate().

Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 29 +++++++++++++++++++++++++++-
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 35 ++++------------------------------
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 21 ++------------------
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 21 ++------------------
 4 files changed, 36 insertions(+), 70 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 39f694e..f822d6f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -866,6 +866,33 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
 	return hisi_sas_task_exec(task, gfp_flags, 0, NULL);
 }
 
+static void hisi_sas_phy_set_linkrate(struct hisi_hba *hisi_hba, int phy_no,
+			struct sas_phy_linkrates *r)
+{
+	struct sas_phy_linkrates _r;
+
+	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+	struct asd_sas_phy *sas_phy = &phy->sas_phy;
+	enum sas_linkrate min, max;
+
+	if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+		max = sas_phy->phy->maximum_linkrate;
+		min = r->minimum_linkrate;
+	} else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+		max = r->maximum_linkrate;
+		min = sas_phy->phy->minimum_linkrate;
+	} else
+		return;
+
+	_r.maximum_linkrate = max;
+	_r.minimum_linkrate = min;
+
+	hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+	msleep(100);
+	hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, &_r);
+	hisi_hba->hw->phy_start(hisi_hba, phy_no);
+}
+
 static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
 				void *funcdata)
 {
@@ -889,7 +916,7 @@ static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
 		break;
 
 	case PHY_FUNC_SET_LINK_RATE:
-		hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, funcdata);
+		hisi_sas_phy_set_linkrate(hisi_hba, phy_no, funcdata);
 		break;
 	case PHY_FUNC_GET_EVENTS:
 		if (hisi_hba->hw->get_events) {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index abe175f..8fa79d0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -855,39 +855,12 @@ static enum sas_linkrate phy_get_max_linkrate_v1_hw(void)
 static void phy_set_linkrate_v1_hw(struct hisi_hba *hisi_hba, int phy_no,
 		struct sas_phy_linkrates *r)
 {
-	u32 prog_phy_link_rate =
-		hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
-	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-	int i;
-	enum sas_linkrate min, max;
-	u32 rate_mask = 0;
-
-	if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = sas_phy->phy->maximum_linkrate;
-		min = r->minimum_linkrate;
-	} else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = r->maximum_linkrate;
-		min = sas_phy->phy->minimum_linkrate;
-	} else
-		return;
-
-	sas_phy->phy->maximum_linkrate = max;
-	sas_phy->phy->minimum_linkrate = min;
-
-	max -= SAS_LINK_RATE_1_5_GBPS;
+	enum sas_linkrate max = r->maximum_linkrate;
+	u32 prog_phy_link_rate = 0x800;
 
-	for (i = 0; i <= max; i++)
-		rate_mask |= 1 << (i * 2);
-
-	prog_phy_link_rate &= ~0xff;
-	prog_phy_link_rate |= rate_mask;
-
-	disable_phy_v1_hw(hisi_hba, phy_no);
-	msleep(100);
+	prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
 	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
-			prog_phy_link_rate);
-	start_phy_v1_hw(hisi_hba, phy_no);
+			     prog_phy_link_rate);
 }
 
 static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 911bb76..fb0e966 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1600,29 +1600,12 @@ static enum sas_linkrate phy_get_max_linkrate_v2_hw(void)
 static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
 		struct sas_phy_linkrates *r)
 {
-	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-	enum sas_linkrate min, max;
+	enum sas_linkrate max = r->maximum_linkrate;
 	u32 prog_phy_link_rate = 0x800;
 
-	if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = sas_phy->phy->maximum_linkrate;
-		min = r->minimum_linkrate;
-	} else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = r->maximum_linkrate;
-		min = sas_phy->phy->minimum_linkrate;
-	} else
-		return;
-
-	sas_phy->phy->maximum_linkrate = max;
-	sas_phy->phy->minimum_linkrate = min;
 	prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
-
-	disable_phy_v2_hw(hisi_hba, phy_no);
-	msleep(100);
 	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
-			prog_phy_link_rate);
-	start_phy_v2_hw(hisi_hba, phy_no);
+			     prog_phy_link_rate);
 }
 
 static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index c013673..0a80a39 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1879,29 +1879,12 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
 static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no,
 		struct sas_phy_linkrates *r)
 {
-	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
-	struct asd_sas_phy *sas_phy = &phy->sas_phy;
-	enum sas_linkrate min, max;
+	enum sas_linkrate max = r->maximum_linkrate;
 	u32 prog_phy_link_rate = 0x800;
 
-	if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = sas_phy->phy->maximum_linkrate;
-		min = r->minimum_linkrate;
-	} else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
-		max = r->maximum_linkrate;
-		min = sas_phy->phy->minimum_linkrate;
-	} else
-		return;
-
-	sas_phy->phy->maximum_linkrate = max;
-	sas_phy->phy->minimum_linkrate = min;
 	prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
-
-	disable_phy_v3_hw(hisi_hba, phy_no);
-	msleep(100);
 	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
-			prog_phy_link_rate);
-	start_phy_v3_hw(hisi_hba, phy_no);
+			     prog_phy_link_rate);
 }
 
 static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
-- 
1.9.1

[PATCH 02/13] scsi: hisi_sas: change slot index allocation mode

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

Currently we find the lowest available empty bit in the
IPTT bitmap to allocate the IPTT for a command.

To reduce possibility of hitting unknown SoC bugs and
also aid in the debugging of those same bugs, change
the allocation mode.

The next allocation method is to use the next free slot
adjacent to the most recently allocated slot, in a
round-robin fashion.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h      |  1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c | 13 ++++++++++---
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 52fc709..3c88400 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -274,6 +274,7 @@ struct hisi_hba {
 	struct workqueue_struct *wq;
 
 	int slot_index_count;
+	int last_slot_index;
 	unsigned long *slot_index_tags;
 	unsigned long reject_stp_links_msk;
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index f822d6f..1d300a2 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -195,11 +195,18 @@ static int hisi_sas_slot_index_alloc(struct hisi_hba *hisi_hba, int *slot_idx)
 	unsigned int index;
 	void *bitmap = hisi_hba->slot_index_tags;
 
-	index = find_first_zero_bit(bitmap, hisi_hba->slot_index_count);
-	if (index >= hisi_hba->slot_index_count)
-		return -SAS_QUEUE_FULL;
+	index = find_next_zero_bit(bitmap, hisi_hba->slot_index_count,
+			hisi_hba->last_slot_index + 1);
+	if (index >= hisi_hba->slot_index_count) {
+		index = find_next_zero_bit(bitmap, hisi_hba->slot_index_count,
+					   0);
+		if (index >= hisi_hba->slot_index_count)
+			return -SAS_QUEUE_FULL;
+	}
 	hisi_sas_slot_index_set(hisi_hba, index);
 	*slot_idx = index;
+	hisi_hba->last_slot_index = index;
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 02/13] scsi: hisi_sas: change slot index allocation mode

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

Currently we find the lowest available empty bit in the
IPTT bitmap to allocate the IPTT for a command.

To reduce possibility of hitting unknown SoC bugs and
also aid in the debugging of those same bugs, change
the allocation mode.

The next allocation method is to use the next free slot
adjacent to the most recently allocated slot, in a
round-robin fashion.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h      |  1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c | 13 ++++++++++---
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 52fc709..3c88400 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -274,6 +274,7 @@ struct hisi_hba {
 	struct workqueue_struct *wq;
 
 	int slot_index_count;
+	int last_slot_index;
 	unsigned long *slot_index_tags;
 	unsigned long reject_stp_links_msk;
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index f822d6f..1d300a2 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -195,11 +195,18 @@ static int hisi_sas_slot_index_alloc(struct hisi_hba *hisi_hba, int *slot_idx)
 	unsigned int index;
 	void *bitmap = hisi_hba->slot_index_tags;
 
-	index = find_first_zero_bit(bitmap, hisi_hba->slot_index_count);
-	if (index >= hisi_hba->slot_index_count)
-		return -SAS_QUEUE_FULL;
+	index = find_next_zero_bit(bitmap, hisi_hba->slot_index_count,
+			hisi_hba->last_slot_index + 1);
+	if (index >= hisi_hba->slot_index_count) {
+		index = find_next_zero_bit(bitmap, hisi_hba->slot_index_count,
+					   0);
+		if (index >= hisi_hba->slot_index_count)
+			return -SAS_QUEUE_FULL;
+	}
 	hisi_sas_slot_index_set(hisi_hba, index);
 	*slot_idx = index;
+	hisi_hba->last_slot_index = index;
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 03/13] scsi: hisi_sas: Change common allocation mode of device id

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

To reduce possibility of hitting unknown SoC bugs and aid
debugging and test, change allocation mode of device id from
last used device id instead of lowest available index.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h      | 1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 3c88400..b4717bd 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -275,6 +275,7 @@ struct hisi_hba {
 
 	int slot_index_count;
 	int last_slot_index;
+	int last_dev_id;
 	unsigned long *slot_index_tags;
 	unsigned long reject_stp_links_msk;
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 1d300a2..04a3eb4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -596,10 +596,12 @@ static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
 	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
 	struct hisi_sas_device *sas_dev = NULL;
 	unsigned long flags;
+	int last = hisi_hba->last_dev_id;
+	int first = (hisi_hba->last_dev_id + 1) % HISI_SAS_MAX_DEVICES;
 	int i;
 
 	spin_lock_irqsave(&hisi_hba->lock, flags);
-	for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+	for (i = first; i != last; i %= HISI_SAS_MAX_DEVICES) {
 		if (hisi_hba->devices[i].dev_type == SAS_PHY_UNUSED) {
 			int queue = i % hisi_hba->queue_count;
 			struct hisi_sas_dq *dq = &hisi_hba->dq[queue];
@@ -614,7 +616,9 @@ static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
 			INIT_LIST_HEAD(&hisi_hba->devices[i].list);
 			break;
 		}
+		i++;
 	}
+	hisi_hba->last_dev_id = i;
 	spin_unlock_irqrestore(&hisi_hba->lock, flags);
 
 	return sas_dev;
-- 
1.9.1

[PATCH 03/13] scsi: hisi_sas: Change common allocation mode of device id

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

To reduce possibility of hitting unknown SoC bugs and aid
debugging and test, change allocation mode of device id from
last used device id instead of lowest available index.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h      | 1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 3c88400..b4717bd 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -275,6 +275,7 @@ struct hisi_hba {
 
 	int slot_index_count;
 	int last_slot_index;
+	int last_dev_id;
 	unsigned long *slot_index_tags;
 	unsigned long reject_stp_links_msk;
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 1d300a2..04a3eb4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -596,10 +596,12 @@ static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
 	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
 	struct hisi_sas_device *sas_dev = NULL;
 	unsigned long flags;
+	int last = hisi_hba->last_dev_id;
+	int first = (hisi_hba->last_dev_id + 1) % HISI_SAS_MAX_DEVICES;
 	int i;
 
 	spin_lock_irqsave(&hisi_hba->lock, flags);
-	for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+	for (i = first; i != last; i %= HISI_SAS_MAX_DEVICES) {
 		if (hisi_hba->devices[i].dev_type == SAS_PHY_UNUSED) {
 			int queue = i % hisi_hba->queue_count;
 			struct hisi_sas_dq *dq = &hisi_hba->dq[queue];
@@ -614,7 +616,9 @@ static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
 			INIT_LIST_HEAD(&hisi_hba->devices[i].list);
 			break;
 		}
+		i++;
 	}
+	hisi_hba->last_dev_id = i;
 	spin_unlock_irqrestore(&hisi_hba->lock, flags);
 
 	return sas_dev;
-- 
1.9.1

[PATCH 04/13] scsi: hisi_sas: Add LED feature for v3 hw

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

This patch implements LED feature of directly attached disk
for v3 hw.

In fact, this hw has created an SGPIO component for LED
feature, and we can control LEDs just by internal registers.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 42 ++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 0a80a39..a043d9c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -107,6 +107,10 @@
 #define AWQOS_AWCACHE_CFG	0xc84
 #define ARQOS_ARCACHE_CFG	0xc88
 #define HILINK_ERR_DFX		0xe04
+#define SAS_GPIO_CFG_0		0x1000
+#define SAS_GPIO_CFG_1		0x1004
+#define SAS_GPIO_TX_0_1	0x1040
+#define SAS_CFG_DRIVE_VLD	0x1070
 
 /* phy registers requiring init */
 #define PORT_BASE			(0x2000)
@@ -549,6 +553,14 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 	hisi_sas_write32(hisi_hba, SAS_RAS_INTR1_MASK, 0x0);
 	hisi_sas_write32(hisi_hba, SAS_RAS_INTR2_MASK, 0x0);
 	hisi_sas_write32(hisi_hba, CFG_SAS_RAS_INTR_MASK, 0x0);
+
+	/* LED registers init */
+	hisi_sas_write32(hisi_hba, SAS_CFG_DRIVE_VLD, 0x80000ff);
+	hisi_sas_write32(hisi_hba, SAS_GPIO_TX_0_1, 0x80808080);
+	hisi_sas_write32(hisi_hba, SAS_GPIO_TX_0_1 + 0x4, 0x80808080);
+	/* Configure blink generator rate A to 1Hz and B to 4Hz */
+	hisi_sas_write32(hisi_hba, SAS_GPIO_CFG_1, 0x121700);
+	hisi_sas_write32(hisi_hba, SAS_GPIO_CFG_0, 0x800000);
 }
 
 static void config_phy_opt_mode_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
@@ -1974,6 +1986,35 @@ static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
 	return hw_init_v3_hw(hisi_hba);
 }
 
+static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
+			u8 reg_index, u8 reg_count, u8 *write_data)
+{
+	struct device *dev = hisi_hba->dev;
+	u32 *data = (u32 *)write_data;
+	int i;
+
+	switch (reg_type) {
+	case SAS_GPIO_REG_TX:
+		if ((reg_index + reg_count) > ((hisi_hba->n_phy + 3) / 4)) {
+			dev_err(dev, "write gpio: invalid reg range[%d, %d]\n",
+				reg_index, reg_index + reg_count - 1);
+			return -EINVAL;
+		}
+
+		for (i = 0; i < reg_count; i++)
+			hisi_sas_write32(hisi_hba,
+					 SAS_GPIO_TX_0_1 + (reg_index + i) * 4,
+					 data[i]);
+		break;
+	default:
+		dev_err(dev, "write gpio: unsupported or bad reg type %d\n",
+				reg_type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct hisi_sas_hw hisi_sas_v3_hw = {
 	.hw_init = hisi_sas_v3_init,
 	.setup_itct = setup_itct_v3_hw,
@@ -1999,6 +2040,7 @@ static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
 	.soft_reset = soft_reset_v3_hw,
 	.get_phys_state = get_phys_state_v3_hw,
 	.get_events = phy_get_events_v3_hw,
+	.write_gpio = write_gpio_v3_hw,
 };
 
 static struct Scsi_Host *
-- 
1.9.1

[PATCH 04/13] scsi: hisi_sas: Add LED feature for v3 hw

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

This patch implements LED feature of directly attached disk
for v3 hw.

In fact, this hw has created an SGPIO component for LED
feature, and we can control LEDs just by internal registers.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 42 ++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 0a80a39..a043d9c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -107,6 +107,10 @@
 #define AWQOS_AWCACHE_CFG	0xc84
 #define ARQOS_ARCACHE_CFG	0xc88
 #define HILINK_ERR_DFX		0xe04
+#define SAS_GPIO_CFG_0		0x1000
+#define SAS_GPIO_CFG_1		0x1004
+#define SAS_GPIO_TX_0_1	0x1040
+#define SAS_CFG_DRIVE_VLD	0x1070
 
 /* phy registers requiring init */
 #define PORT_BASE			(0x2000)
@@ -549,6 +553,14 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 	hisi_sas_write32(hisi_hba, SAS_RAS_INTR1_MASK, 0x0);
 	hisi_sas_write32(hisi_hba, SAS_RAS_INTR2_MASK, 0x0);
 	hisi_sas_write32(hisi_hba, CFG_SAS_RAS_INTR_MASK, 0x0);
+
+	/* LED registers init */
+	hisi_sas_write32(hisi_hba, SAS_CFG_DRIVE_VLD, 0x80000ff);
+	hisi_sas_write32(hisi_hba, SAS_GPIO_TX_0_1, 0x80808080);
+	hisi_sas_write32(hisi_hba, SAS_GPIO_TX_0_1 + 0x4, 0x80808080);
+	/* Configure blink generator rate A to 1Hz and B to 4Hz */
+	hisi_sas_write32(hisi_hba, SAS_GPIO_CFG_1, 0x121700);
+	hisi_sas_write32(hisi_hba, SAS_GPIO_CFG_0, 0x800000);
 }
 
 static void config_phy_opt_mode_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
@@ -1974,6 +1986,35 @@ static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
 	return hw_init_v3_hw(hisi_hba);
 }
 
+static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
+			u8 reg_index, u8 reg_count, u8 *write_data)
+{
+	struct device *dev = hisi_hba->dev;
+	u32 *data = (u32 *)write_data;
+	int i;
+
+	switch (reg_type) {
+	case SAS_GPIO_REG_TX:
+		if ((reg_index + reg_count) > ((hisi_hba->n_phy + 3) / 4)) {
+			dev_err(dev, "write gpio: invalid reg range[%d, %d]\n",
+				reg_index, reg_index + reg_count - 1);
+			return -EINVAL;
+		}
+
+		for (i = 0; i < reg_count; i++)
+			hisi_sas_write32(hisi_hba,
+					 SAS_GPIO_TX_0_1 + (reg_index + i) * 4,
+					 data[i]);
+		break;
+	default:
+		dev_err(dev, "write gpio: unsupported or bad reg type %d\n",
+				reg_type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct hisi_sas_hw hisi_sas_v3_hw = {
 	.hw_init = hisi_sas_v3_init,
 	.setup_itct = setup_itct_v3_hw,
@@ -1999,6 +2040,7 @@ static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
 	.soft_reset = soft_reset_v3_hw,
 	.get_phys_state = get_phys_state_v3_hw,
 	.get_events = phy_get_events_v3_hw,
+	.write_gpio = write_gpio_v3_hw,
 };
 
 static struct Scsi_Host *
-- 
1.9.1

[PATCH 05/13] scsi: hisi_sas: Reset disks when discovered

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

When a disk is discovered, it may be in an error state,
or there may be residual commands remaining in the disk.

To ensure any disk is in good state after discovery,
reset via TMF (for SAS disk) or softreset (for a SATA
disk).

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 50 ++++++++++++++++++++++++++++++++++-
 1 file changed, 49 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 04a3eb4..0596553 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -24,6 +24,9 @@ static int hisi_sas_debug_issue_ssp_tmf(struct domain_device *device,
 static int hisi_sas_softreset_ata_disk(struct domain_device *device);
 static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
 				void *funcdata);
+static void hisi_sas_release_task(struct hisi_hba *hisi_hba,
+				  struct domain_device *device);
+static void hisi_sas_dev_gone(struct domain_device *device);
 
 u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
 {
@@ -624,12 +627,49 @@ static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
 	return sas_dev;
 }
 
+#define HISI_SAS_SRST_ATA_DISK_CNT 3
+static int hisi_sas_init_device(struct domain_device *device)
+{
+	int rc = TMF_RESP_FUNC_COMPLETE;
+	struct scsi_lun lun;
+	struct hisi_sas_tmf_task tmf_task;
+	int retry = HISI_SAS_SRST_ATA_DISK_CNT;
+	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+
+	switch (device->dev_type) {
+	case SAS_END_DEVICE:
+		int_to_scsilun(0, &lun);
+
+		tmf_task.tmf = TMF_CLEAR_TASK_SET;
+		rc = hisi_sas_debug_issue_ssp_tmf(device, lun.scsi_lun,
+						  &tmf_task);
+		if (rc == TMF_RESP_FUNC_COMPLETE)
+			hisi_sas_release_task(hisi_hba, device);
+		break;
+	case SAS_SATA_DEV:
+	case SAS_SATA_PM:
+	case SAS_SATA_PM_PORT:
+	case SAS_SATA_PENDING:
+		while (retry-- > 0) {
+			rc = hisi_sas_softreset_ata_disk(device);
+			if (!rc)
+				break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
 static int hisi_sas_dev_found(struct domain_device *device)
 {
 	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
 	struct domain_device *parent_dev = device->parent;
 	struct hisi_sas_device *sas_dev;
 	struct device *dev = hisi_hba->dev;
+	int rc;
 
 	if (hisi_hba->hw->alloc_dev)
 		sas_dev = hisi_hba->hw->alloc_dev(device);
@@ -661,14 +701,22 @@ static int hisi_sas_dev_found(struct domain_device *device)
 				 "dev:%016llx at ex:%016llx\n",
 				 SAS_ADDR(device->sas_addr),
 				 SAS_ADDR(parent_dev->sas_addr));
-			return -EINVAL;
+			rc = -EINVAL;
+			goto err_out;
 		}
 	}
 
 	dev_info(dev, "dev[%d:%x] found\n",
 		sas_dev->device_id, sas_dev->dev_type);
 
+	rc = hisi_sas_init_device(device);
+	if (rc)
+		goto err_out;
 	return 0;
+
+err_out:
+	hisi_sas_dev_gone(device);
+	return rc;
 }
 
 static int hisi_sas_slave_configure(struct scsi_device *sdev)
-- 
1.9.1

[PATCH 05/13] scsi: hisi_sas: Reset disks when discovered

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

When a disk is discovered, it may be in an error state,
or there may be residual commands remaining in the disk.

To ensure any disk is in good state after discovery,
reset via TMF (for SAS disk) or softreset (for a SATA
disk).

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 50 ++++++++++++++++++++++++++++++++++-
 1 file changed, 49 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 04a3eb4..0596553 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -24,6 +24,9 @@ static int hisi_sas_debug_issue_ssp_tmf(struct domain_device *device,
 static int hisi_sas_softreset_ata_disk(struct domain_device *device);
 static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
 				void *funcdata);
+static void hisi_sas_release_task(struct hisi_hba *hisi_hba,
+				  struct domain_device *device);
+static void hisi_sas_dev_gone(struct domain_device *device);
 
 u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
 {
@@ -624,12 +627,49 @@ static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
 	return sas_dev;
 }
 
+#define HISI_SAS_SRST_ATA_DISK_CNT 3
+static int hisi_sas_init_device(struct domain_device *device)
+{
+	int rc = TMF_RESP_FUNC_COMPLETE;
+	struct scsi_lun lun;
+	struct hisi_sas_tmf_task tmf_task;
+	int retry = HISI_SAS_SRST_ATA_DISK_CNT;
+	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+
+	switch (device->dev_type) {
+	case SAS_END_DEVICE:
+		int_to_scsilun(0, &lun);
+
+		tmf_task.tmf = TMF_CLEAR_TASK_SET;
+		rc = hisi_sas_debug_issue_ssp_tmf(device, lun.scsi_lun,
+						  &tmf_task);
+		if (rc == TMF_RESP_FUNC_COMPLETE)
+			hisi_sas_release_task(hisi_hba, device);
+		break;
+	case SAS_SATA_DEV:
+	case SAS_SATA_PM:
+	case SAS_SATA_PM_PORT:
+	case SAS_SATA_PENDING:
+		while (retry-- > 0) {
+			rc = hisi_sas_softreset_ata_disk(device);
+			if (!rc)
+				break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
 static int hisi_sas_dev_found(struct domain_device *device)
 {
 	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
 	struct domain_device *parent_dev = device->parent;
 	struct hisi_sas_device *sas_dev;
 	struct device *dev = hisi_hba->dev;
+	int rc;
 
 	if (hisi_hba->hw->alloc_dev)
 		sas_dev = hisi_hba->hw->alloc_dev(device);
@@ -661,14 +701,22 @@ static int hisi_sas_dev_found(struct domain_device *device)
 				 "dev:%016llx at ex:%016llx\n",
 				 SAS_ADDR(device->sas_addr),
 				 SAS_ADDR(parent_dev->sas_addr));
-			return -EINVAL;
+			rc = -EINVAL;
+			goto err_out;
 		}
 	}
 
 	dev_info(dev, "dev[%d:%x] found\n",
 		sas_dev->device_id, sas_dev->dev_type);
 
+	rc = hisi_sas_init_device(device);
+	if (rc)
+		goto err_out;
 	return 0;
+
+err_out:
+	hisi_sas_dev_gone(device);
+	return rc;
 }
 
 static int hisi_sas_slave_configure(struct scsi_device *sdev)
-- 
1.9.1

[PATCH 06/13] scsi: hisi_sas: Create a scsi_host_template per HW module

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

When a SCSI host is registered, the SCSI mid-layer takes
a reference to a module in Scsi_host.hostt.module. In doing
this, we are prevented from removing the driver module for
the host in dangerous scenario, like when a disk is mounted.

Currently there is only one scsi_host_template (sht) for
all HW versions, and this is the main.c module. So this means
that we can possibly remove the HW module in this dangerous
scenario, as SCSI mid-layer is only referencing the main.c
module.

To fix this, create a sht per module, referencing that same
module to create the Scsi host.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  8 +++++--
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 40 +++++++++-------------------------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 23 +++++++++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 24 ++++++++++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 24 +++++++++++++++++++-
 5 files changed, 86 insertions(+), 33 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index b4717bd..37c9a62 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -248,6 +248,7 @@ struct hisi_sas_hw {
 				u8 reg_index, u8 reg_count, u8 *write_data);
 	int max_command_entries;
 	int complete_hdr_size;
+	struct scsi_host_template *sht;
 };
 
 struct hisi_hba {
@@ -440,8 +441,6 @@ struct hisi_sas_slot_buf_table {
 };
 
 extern struct scsi_transport_template *hisi_sas_stt;
-extern struct scsi_host_template *hisi_sas_sht;
-
 extern void hisi_sas_stop_phys(struct hisi_hba *hisi_hba);
 extern int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost);
 extern void hisi_sas_free(struct hisi_hba *hisi_hba);
@@ -456,6 +455,11 @@ extern int hisi_sas_probe(struct platform_device *pdev,
 			  const struct hisi_sas_hw *ops);
 extern int hisi_sas_remove(struct platform_device *pdev);
 
+extern int hisi_sas_slave_configure(struct scsi_device *sdev);
+extern int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time);
+extern void hisi_sas_scan_start(struct Scsi_Host *shost);
+extern struct device_attribute *host_attrs[];
+extern int hisi_sas_host_reset(struct Scsi_Host *shost, int reset_type);
 extern void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy);
 extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
 				    struct sas_task *task,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 0596553..7b8623b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -719,7 +719,7 @@ static int hisi_sas_dev_found(struct domain_device *device)
 	return rc;
 }
 
-static int hisi_sas_slave_configure(struct scsi_device *sdev)
+int hisi_sas_slave_configure(struct scsi_device *sdev)
 {
 	struct domain_device *dev = sdev_to_domain_dev(sdev);
 	int ret = sas_slave_configure(sdev);
@@ -731,15 +731,17 @@ static int hisi_sas_slave_configure(struct scsi_device *sdev)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(hisi_sas_slave_configure);
 
-static void hisi_sas_scan_start(struct Scsi_Host *shost)
+void hisi_sas_scan_start(struct Scsi_Host *shost)
 {
 	struct hisi_hba *hisi_hba = shost_priv(shost);
 
 	hisi_hba->hw->phys_init(hisi_hba);
 }
+EXPORT_SYMBOL_GPL(hisi_sas_scan_start);
 
-static int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time)
+int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time)
 {
 	struct hisi_hba *hisi_hba = shost_priv(shost);
 	struct sas_ha_struct *sha = &hisi_hba->sha;
@@ -751,6 +753,7 @@ static int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time)
 	sas_drain_work(sha);
 	return 1;
 }
+EXPORT_SYMBOL_GPL(hisi_sas_scan_finished);
 
 static void hisi_sas_phyup_work(struct work_struct *work)
 {
@@ -1824,34 +1827,11 @@ void hisi_sas_kill_tasklets(struct hisi_hba *hisi_hba)
 struct scsi_transport_template *hisi_sas_stt;
 EXPORT_SYMBOL_GPL(hisi_sas_stt);
 
-static struct device_attribute *host_attrs[] = {
+struct device_attribute *host_attrs[] = {
 	&dev_attr_phy_event_threshold,
 	NULL,
 };
-
-static struct scsi_host_template _hisi_sas_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.queuecommand		= sas_queuecommand,
-	.target_alloc		= sas_target_alloc,
-	.slave_configure	= hisi_sas_slave_configure,
-	.scan_finished		= hisi_sas_scan_finished,
-	.scan_start		= hisi_sas_scan_start,
-	.change_queue_depth	= sas_change_queue_depth,
-	.bios_param		= sas_bios_param,
-	.can_queue		= 1,
-	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
-	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
-	.use_clustering		= ENABLE_CLUSTERING,
-	.eh_device_reset_handler = sas_eh_device_reset_handler,
-	.eh_target_reset_handler = sas_eh_target_reset_handler,
-	.target_destroy		= sas_target_destroy,
-	.ioctl			= sas_ioctl,
-	.shost_attrs		= host_attrs,
-};
-struct scsi_host_template *hisi_sas_sht = &_hisi_sas_sht;
-EXPORT_SYMBOL_GPL(hisi_sas_sht);
+EXPORT_SYMBOL_GPL(host_attrs);
 
 static struct sas_domain_function_template hisi_sas_transport_ops = {
 	.lldd_dev_found		= hisi_sas_dev_found,
@@ -2161,7 +2141,7 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 	struct hisi_hba *hisi_hba;
 	struct device *dev = &pdev->dev;
 
-	shost = scsi_host_alloc(hisi_sas_sht, sizeof(*hisi_hba));
+	shost = scsi_host_alloc(hw->sht, sizeof(*hisi_hba));
 	if (!shost) {
 		dev_err(dev, "scsi host alloc failed\n");
 		return NULL;
@@ -2211,7 +2191,7 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 }
 
 int hisi_sas_probe(struct platform_device *pdev,
-			 const struct hisi_sas_hw *hw)
+		   const struct hisi_sas_hw *hw)
 {
 	struct Scsi_Host *shost;
 	struct hisi_hba *hisi_hba;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 8fa79d0..8d5d857 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1788,6 +1788,28 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
 	return 0;
 }
 
+static struct scsi_host_template sht_v1_hw = {
+	.name			= DRV_NAME,
+	.module			= THIS_MODULE,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= hisi_sas_slave_configure,
+	.scan_finished		= hisi_sas_scan_finished,
+	.scan_start		= hisi_sas_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler = sas_eh_device_reset_handler,
+	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+	.shost_attrs		= host_attrs,
+};
+
 static const struct hisi_sas_hw hisi_sas_v1_hw = {
 	.hw_init = hisi_sas_v1_init,
 	.setup_itct = setup_itct_v1_hw,
@@ -1807,6 +1829,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
 	.get_wideport_bitmap = get_wideport_bitmap_v1_hw,
 	.max_command_entries = HISI_SAS_COMMAND_ENTRIES_V1_HW,
 	.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
+	.sht = &sht_v1_hw,
 };
 
 static int hisi_sas_v1_probe(struct platform_device *pdev)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index fb0e966..8def327 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3501,6 +3501,29 @@ static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	return 0;
 }
 
+
+static struct scsi_host_template sht_v2_hw = {
+	.name			= DRV_NAME,
+	.module			= THIS_MODULE,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= hisi_sas_slave_configure,
+	.scan_finished		= hisi_sas_scan_finished,
+	.scan_start		= hisi_sas_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler = sas_eh_device_reset_handler,
+	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+	.shost_attrs		= host_attrs,
+};
+
 static const struct hisi_sas_hw hisi_sas_v2_hw = {
 	.hw_init = hisi_sas_v2_init,
 	.setup_itct = setup_itct_v2_hw,
@@ -3529,6 +3552,7 @@ static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	.soft_reset = soft_reset_v2_hw,
 	.get_phys_state = get_phys_state_v2_hw,
 	.write_gpio = write_gpio_v2_hw,
+	.sht = &sht_v2_hw,
 };
 
 static int hisi_sas_v2_probe(struct platform_device *pdev)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index a043d9c..13d2134 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2015,6 +2015,28 @@ static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	return 0;
 }
 
+static struct scsi_host_template sht_v3_hw = {
+	.name			= DRV_NAME,
+	.module			= THIS_MODULE,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= hisi_sas_slave_configure,
+	.scan_finished		= hisi_sas_scan_finished,
+	.scan_start		= hisi_sas_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler = sas_eh_device_reset_handler,
+	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+	.shost_attrs		= host_attrs,
+};
+
 static const struct hisi_sas_hw hisi_sas_v3_hw = {
 	.hw_init = hisi_sas_v3_init,
 	.setup_itct = setup_itct_v3_hw,
@@ -2050,7 +2072,7 @@ static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	struct hisi_hba *hisi_hba;
 	struct device *dev = &pdev->dev;
 
-	shost = scsi_host_alloc(hisi_sas_sht, sizeof(*hisi_hba));
+	shost = scsi_host_alloc(&sht_v3_hw, sizeof(*hisi_hba));
 	if (!shost) {
 		dev_err(dev, "shost alloc failed\n");
 		return NULL;
-- 
1.9.1

[PATCH 06/13] scsi: hisi_sas: Create a scsi_host_template per HW module

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

When a SCSI host is registered, the SCSI mid-layer takes
a reference to a module in Scsi_host.hostt.module. In doing
this, we are prevented from removing the driver module for
the host in dangerous scenario, like when a disk is mounted.

Currently there is only one scsi_host_template (sht) for
all HW versions, and this is the main.c module. So this means
that we can possibly remove the HW module in this dangerous
scenario, as SCSI mid-layer is only referencing the main.c
module.

To fix this, create a sht per module, referencing that same
module to create the Scsi host.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  8 +++++--
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 40 +++++++++-------------------------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 23 +++++++++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 24 ++++++++++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 24 +++++++++++++++++++-
 5 files changed, 86 insertions(+), 33 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index b4717bd..37c9a62 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -248,6 +248,7 @@ struct hisi_sas_hw {
 				u8 reg_index, u8 reg_count, u8 *write_data);
 	int max_command_entries;
 	int complete_hdr_size;
+	struct scsi_host_template *sht;
 };
 
 struct hisi_hba {
@@ -440,8 +441,6 @@ struct hisi_sas_slot_buf_table {
 };
 
 extern struct scsi_transport_template *hisi_sas_stt;
-extern struct scsi_host_template *hisi_sas_sht;
-
 extern void hisi_sas_stop_phys(struct hisi_hba *hisi_hba);
 extern int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost);
 extern void hisi_sas_free(struct hisi_hba *hisi_hba);
@@ -456,6 +455,11 @@ extern int hisi_sas_probe(struct platform_device *pdev,
 			  const struct hisi_sas_hw *ops);
 extern int hisi_sas_remove(struct platform_device *pdev);
 
+extern int hisi_sas_slave_configure(struct scsi_device *sdev);
+extern int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time);
+extern void hisi_sas_scan_start(struct Scsi_Host *shost);
+extern struct device_attribute *host_attrs[];
+extern int hisi_sas_host_reset(struct Scsi_Host *shost, int reset_type);
 extern void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy);
 extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
 				    struct sas_task *task,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 0596553..7b8623b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -719,7 +719,7 @@ static int hisi_sas_dev_found(struct domain_device *device)
 	return rc;
 }
 
-static int hisi_sas_slave_configure(struct scsi_device *sdev)
+int hisi_sas_slave_configure(struct scsi_device *sdev)
 {
 	struct domain_device *dev = sdev_to_domain_dev(sdev);
 	int ret = sas_slave_configure(sdev);
@@ -731,15 +731,17 @@ static int hisi_sas_slave_configure(struct scsi_device *sdev)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(hisi_sas_slave_configure);
 
-static void hisi_sas_scan_start(struct Scsi_Host *shost)
+void hisi_sas_scan_start(struct Scsi_Host *shost)
 {
 	struct hisi_hba *hisi_hba = shost_priv(shost);
 
 	hisi_hba->hw->phys_init(hisi_hba);
 }
+EXPORT_SYMBOL_GPL(hisi_sas_scan_start);
 
-static int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time)
+int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time)
 {
 	struct hisi_hba *hisi_hba = shost_priv(shost);
 	struct sas_ha_struct *sha = &hisi_hba->sha;
@@ -751,6 +753,7 @@ static int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time)
 	sas_drain_work(sha);
 	return 1;
 }
+EXPORT_SYMBOL_GPL(hisi_sas_scan_finished);
 
 static void hisi_sas_phyup_work(struct work_struct *work)
 {
@@ -1824,34 +1827,11 @@ void hisi_sas_kill_tasklets(struct hisi_hba *hisi_hba)
 struct scsi_transport_template *hisi_sas_stt;
 EXPORT_SYMBOL_GPL(hisi_sas_stt);
 
-static struct device_attribute *host_attrs[] = {
+struct device_attribute *host_attrs[] = {
 	&dev_attr_phy_event_threshold,
 	NULL,
 };
-
-static struct scsi_host_template _hisi_sas_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.queuecommand		= sas_queuecommand,
-	.target_alloc		= sas_target_alloc,
-	.slave_configure	= hisi_sas_slave_configure,
-	.scan_finished		= hisi_sas_scan_finished,
-	.scan_start		= hisi_sas_scan_start,
-	.change_queue_depth	= sas_change_queue_depth,
-	.bios_param		= sas_bios_param,
-	.can_queue		= 1,
-	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
-	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
-	.use_clustering		= ENABLE_CLUSTERING,
-	.eh_device_reset_handler = sas_eh_device_reset_handler,
-	.eh_target_reset_handler = sas_eh_target_reset_handler,
-	.target_destroy		= sas_target_destroy,
-	.ioctl			= sas_ioctl,
-	.shost_attrs		= host_attrs,
-};
-struct scsi_host_template *hisi_sas_sht = &_hisi_sas_sht;
-EXPORT_SYMBOL_GPL(hisi_sas_sht);
+EXPORT_SYMBOL_GPL(host_attrs);
 
 static struct sas_domain_function_template hisi_sas_transport_ops = {
 	.lldd_dev_found		= hisi_sas_dev_found,
@@ -2161,7 +2141,7 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 	struct hisi_hba *hisi_hba;
 	struct device *dev = &pdev->dev;
 
-	shost = scsi_host_alloc(hisi_sas_sht, sizeof(*hisi_hba));
+	shost = scsi_host_alloc(hw->sht, sizeof(*hisi_hba));
 	if (!shost) {
 		dev_err(dev, "scsi host alloc failed\n");
 		return NULL;
@@ -2211,7 +2191,7 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 }
 
 int hisi_sas_probe(struct platform_device *pdev,
-			 const struct hisi_sas_hw *hw)
+		   const struct hisi_sas_hw *hw)
 {
 	struct Scsi_Host *shost;
 	struct hisi_hba *hisi_hba;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 8fa79d0..8d5d857 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1788,6 +1788,28 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
 	return 0;
 }
 
+static struct scsi_host_template sht_v1_hw = {
+	.name			= DRV_NAME,
+	.module			= THIS_MODULE,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= hisi_sas_slave_configure,
+	.scan_finished		= hisi_sas_scan_finished,
+	.scan_start		= hisi_sas_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler = sas_eh_device_reset_handler,
+	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+	.shost_attrs		= host_attrs,
+};
+
 static const struct hisi_sas_hw hisi_sas_v1_hw = {
 	.hw_init = hisi_sas_v1_init,
 	.setup_itct = setup_itct_v1_hw,
@@ -1807,6 +1829,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
 	.get_wideport_bitmap = get_wideport_bitmap_v1_hw,
 	.max_command_entries = HISI_SAS_COMMAND_ENTRIES_V1_HW,
 	.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
+	.sht = &sht_v1_hw,
 };
 
 static int hisi_sas_v1_probe(struct platform_device *pdev)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index fb0e966..8def327 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3501,6 +3501,29 @@ static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	return 0;
 }
 
+
+static struct scsi_host_template sht_v2_hw = {
+	.name			= DRV_NAME,
+	.module			= THIS_MODULE,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= hisi_sas_slave_configure,
+	.scan_finished		= hisi_sas_scan_finished,
+	.scan_start		= hisi_sas_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler = sas_eh_device_reset_handler,
+	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+	.shost_attrs		= host_attrs,
+};
+
 static const struct hisi_sas_hw hisi_sas_v2_hw = {
 	.hw_init = hisi_sas_v2_init,
 	.setup_itct = setup_itct_v2_hw,
@@ -3529,6 +3552,7 @@ static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	.soft_reset = soft_reset_v2_hw,
 	.get_phys_state = get_phys_state_v2_hw,
 	.write_gpio = write_gpio_v2_hw,
+	.sht = &sht_v2_hw,
 };
 
 static int hisi_sas_v2_probe(struct platform_device *pdev)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index a043d9c..13d2134 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2015,6 +2015,28 @@ static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	return 0;
 }
 
+static struct scsi_host_template sht_v3_hw = {
+	.name			= DRV_NAME,
+	.module			= THIS_MODULE,
+	.queuecommand		= sas_queuecommand,
+	.target_alloc		= sas_target_alloc,
+	.slave_configure	= hisi_sas_slave_configure,
+	.scan_finished		= hisi_sas_scan_finished,
+	.scan_start		= hisi_sas_scan_start,
+	.change_queue_depth	= sas_change_queue_depth,
+	.bios_param		= sas_bios_param,
+	.can_queue		= 1,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
+	.use_clustering		= ENABLE_CLUSTERING,
+	.eh_device_reset_handler = sas_eh_device_reset_handler,
+	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.target_destroy		= sas_target_destroy,
+	.ioctl			= sas_ioctl,
+	.shost_attrs		= host_attrs,
+};
+
 static const struct hisi_sas_hw hisi_sas_v3_hw = {
 	.hw_init = hisi_sas_v3_init,
 	.setup_itct = setup_itct_v3_hw,
@@ -2050,7 +2072,7 @@ static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	struct hisi_hba *hisi_hba;
 	struct device *dev = &pdev->dev;
 
-	shost = scsi_host_alloc(hisi_sas_sht, sizeof(*hisi_hba));
+	shost = scsi_host_alloc(&sht_v3_hw, sizeof(*hisi_hba));
 	if (!shost) {
 		dev_err(dev, "shost alloc failed\n");
 		return NULL;
-- 
1.9.1

[PATCH 07/13] scsi: hisi_sas: Init disks after controller reset

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

After the controller is reset, it is possible that the
disks attached still have outstanding IO to complete.

Thus, when the PHYs come back up after controller reset, it
is possible that these IOs complete at some unknown point
later.

We want to ensure that all IOs are complete after the
controller reset so that all associated IPTT and other
resources can be recycled safely.

To achieve this, re-init the disks by TMF or softreset
(in case of ATA devices).

If the init fails - maybe because the device was removed
or link has not come up - then do not release the device
resources, but rather rely on SCSI EH to handle the timeout
for these resources later on.

This patch also does some cleanup to hisi_sas_init_disk(), including
removing superfluous cases in the switch statement.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7b8623b..0dfefdf 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1259,6 +1259,23 @@ static void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
 	}
 }
 
+static void hisi_sas_reset_init_all_devices(struct hisi_hba *hisi_hba)
+{
+	struct hisi_sas_device *sas_dev;
+	struct domain_device *device;
+	int i;
+
+	for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+		sas_dev = &hisi_hba->devices[i];
+		device = sas_dev->sas_device;
+
+		if ((sas_dev->dev_type == SAS_PHY_UNUSED) || !device)
+			continue;
+
+		hisi_sas_init_device(device);
+	}
+}
+
 static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 {
 	struct device *dev = hisi_hba->dev;
@@ -1287,7 +1304,6 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 		scsi_unblock_requests(shost);
 		goto out;
 	}
-	hisi_sas_release_tasks(hisi_hba);
 
 	clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
 
@@ -1295,6 +1311,7 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 	hisi_hba->hw->phys_init(hisi_hba);
 	msleep(1000);
 	hisi_sas_refresh_port_id(hisi_hba);
+	hisi_sas_reset_init_all_devices(hisi_hba);
 	scsi_unblock_requests(shost);
 
 	state = hisi_hba->hw->get_phys_state(hisi_hba);
-- 
1.9.1

[PATCH 07/13] scsi: hisi_sas: Init disks after controller reset

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

After the controller is reset, it is possible that the
disks attached still have outstanding IO to complete.

Thus, when the PHYs come back up after controller reset, it
is possible that these IOs complete at some unknown point
later.

We want to ensure that all IOs are complete after the
controller reset so that all associated IPTT and other
resources can be recycled safely.

To achieve this, re-init the disks by TMF or softreset
(in case of ATA devices).

If the init fails - maybe because the device was removed
or link has not come up - then do not release the device
resources, but rather rely on SCSI EH to handle the timeout
for these resources later on.

This patch also does some cleanup to hisi_sas_init_disk(), including
removing superfluous cases in the switch statement.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7b8623b..0dfefdf 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1259,6 +1259,23 @@ static void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
 	}
 }
 
+static void hisi_sas_reset_init_all_devices(struct hisi_hba *hisi_hba)
+{
+	struct hisi_sas_device *sas_dev;
+	struct domain_device *device;
+	int i;
+
+	for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+		sas_dev = &hisi_hba->devices[i];
+		device = sas_dev->sas_device;
+
+		if ((sas_dev->dev_type == SAS_PHY_UNUSED) || !device)
+			continue;
+
+		hisi_sas_init_device(device);
+	}
+}
+
 static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 {
 	struct device *dev = hisi_hba->dev;
@@ -1287,7 +1304,6 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 		scsi_unblock_requests(shost);
 		goto out;
 	}
-	hisi_sas_release_tasks(hisi_hba);
 
 	clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
 
@@ -1295,6 +1311,7 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 	hisi_hba->hw->phys_init(hisi_hba);
 	msleep(1000);
 	hisi_sas_refresh_port_id(hisi_hba);
+	hisi_sas_reset_init_all_devices(hisi_hba);
 	scsi_unblock_requests(shost);
 
 	state = hisi_hba->hw->get_phys_state(hisi_hba);
-- 
1.9.1

[PATCH 08/13] scsi: hisi_sas: Try wait commands before before controller reset

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

We may reset the controller in many scenarios, such as SCSI EH
and HW errors. There should be no IO which returns from target
when SCSI EH is active. But for other scenarios, there may be.
It is not necessary to make such IOs failure.

This patch adds an function of trying to wait for any commands,
or IO, to complete before host reset. If no more CQ returned from
host controller in 100ms, we assume no more IO can return, and
then stop waiting. We wait 5s at most.

The HW has a register CQE_SEND_CNT to indicate the total number
of CQs that has been reported to driver. We can use this register
and it is reliable to resd this register in such scenarios that
require host reset.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  2 ++
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  2 ++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 19 +++++++++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 20 ++++++++++++++++++++
 4 files changed, 43 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 37c9a62..8ce6abb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -246,6 +246,8 @@ struct hisi_sas_hw {
 	u32 (*get_phys_state)(struct hisi_hba *hisi_hba);
 	int (*write_gpio)(struct hisi_hba *hisi_hba, u8 reg_type,
 				u8 reg_index, u8 reg_count, u8 *write_data);
+	void (*wait_cmds_complete_timeout)(struct hisi_hba *hisi_hba,
+					   int delay_ms, int timeout_ms);
 	int max_command_entries;
 	int complete_hdr_size;
 	struct scsi_host_template *sht;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 0dfefdf..a6fcfb3 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1293,6 +1293,8 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 	old_state = hisi_hba->hw->get_phys_state(hisi_hba);
 
 	scsi_block_requests(shost);
+	hisi_hba->hw->wait_cmds_complete_timeout(hisi_hba, 100, 5000);
+
 	if (timer_pending(&hisi_hba->timer))
 		del_timer_sync(&hisi_hba->timer);
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 8def327..18dbaff 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -144,6 +144,7 @@
 #define SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF	19
 #define SAS_ECC_INTR_MSK		0x1ec
 #define HGC_ERR_STAT_EN			0x238
+#define CQE_SEND_CNT			0x248
 #define DLVRY_Q_0_BASE_ADDR_LO		0x260
 #define DLVRY_Q_0_BASE_ADDR_HI		0x264
 #define DLVRY_Q_0_DEPTH			0x268
@@ -3501,6 +3502,23 @@ static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	return 0;
 }
 
+static void wait_cmds_complete_timeout_v2_hw(struct hisi_hba *hisi_hba,
+					     int delay_ms, int timeout_ms)
+{
+	struct device *dev = hisi_hba->dev;
+	int entries, entries_old = 0, time;
+
+	for (time = 0; time < timeout_ms; time += delay_ms) {
+		entries = hisi_sas_read32(hisi_hba, CQE_SEND_CNT);
+		if (entries == entries_old)
+			break;
+
+		entries_old = entries;
+		msleep(delay_ms);
+	}
+
+	dev_dbg(dev, "wait commands complete %dms\n", time);
+}
 
 static struct scsi_host_template sht_v2_hw = {
 	.name			= DRV_NAME,
@@ -3552,6 +3570,7 @@ static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	.soft_reset = soft_reset_v2_hw,
 	.get_phys_state = get_phys_state_v2_hw,
 	.write_gpio = write_gpio_v2_hw,
+	.wait_cmds_complete_timeout = wait_cmds_complete_timeout_v2_hw,
 	.sht = &sht_v2_hw,
 };
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 13d2134..dd5f542 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -92,6 +92,7 @@
 #define SAS_ECC_INTR			0x1e8
 #define SAS_ECC_INTR_MSK		0x1ec
 #define HGC_ERR_STAT_EN			0x238
+#define CQE_SEND_CNT			0x248
 #define DLVRY_Q_0_BASE_ADDR_LO		0x260
 #define DLVRY_Q_0_BASE_ADDR_HI		0x264
 #define DLVRY_Q_0_DEPTH			0x268
@@ -2015,6 +2016,24 @@ static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	return 0;
 }
 
+static void wait_cmds_complete_timeout_v3_hw(struct hisi_hba *hisi_hba,
+					     int delay_ms, int timeout_ms)
+{
+	struct device *dev = hisi_hba->dev;
+	int entries, entries_old = 0, time;
+
+	for (time = 0; time < timeout_ms; time += delay_ms) {
+		entries = hisi_sas_read32(hisi_hba, CQE_SEND_CNT);
+		if (entries == entries_old)
+			break;
+
+		entries_old = entries;
+		msleep(delay_ms);
+	}
+
+	dev_dbg(dev, "wait commands complete %dms\n", time);
+}
+
 static struct scsi_host_template sht_v3_hw = {
 	.name			= DRV_NAME,
 	.module			= THIS_MODULE,
@@ -2063,6 +2082,7 @@ static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	.get_phys_state = get_phys_state_v3_hw,
 	.get_events = phy_get_events_v3_hw,
 	.write_gpio = write_gpio_v3_hw,
+	.wait_cmds_complete_timeout = wait_cmds_complete_timeout_v3_hw,
 };
 
 static struct Scsi_Host *
-- 
1.9.1

[PATCH 08/13] scsi: hisi_sas: Try wait commands before before controller reset

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

We may reset the controller in many scenarios, such as SCSI EH
and HW errors. There should be no IO which returns from target
when SCSI EH is active. But for other scenarios, there may be.
It is not necessary to make such IOs failure.

This patch adds an function of trying to wait for any commands,
or IO, to complete before host reset. If no more CQ returned from
host controller in 100ms, we assume no more IO can return, and
then stop waiting. We wait 5s at most.

The HW has a register CQE_SEND_CNT to indicate the total number
of CQs that has been reported to driver. We can use this register
and it is reliable to resd this register in such scenarios that
require host reset.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  2 ++
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  2 ++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 19 +++++++++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 20 ++++++++++++++++++++
 4 files changed, 43 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 37c9a62..8ce6abb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -246,6 +246,8 @@ struct hisi_sas_hw {
 	u32 (*get_phys_state)(struct hisi_hba *hisi_hba);
 	int (*write_gpio)(struct hisi_hba *hisi_hba, u8 reg_type,
 				u8 reg_index, u8 reg_count, u8 *write_data);
+	void (*wait_cmds_complete_timeout)(struct hisi_hba *hisi_hba,
+					   int delay_ms, int timeout_ms);
 	int max_command_entries;
 	int complete_hdr_size;
 	struct scsi_host_template *sht;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 0dfefdf..a6fcfb3 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1293,6 +1293,8 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 	old_state = hisi_hba->hw->get_phys_state(hisi_hba);
 
 	scsi_block_requests(shost);
+	hisi_hba->hw->wait_cmds_complete_timeout(hisi_hba, 100, 5000);
+
 	if (timer_pending(&hisi_hba->timer))
 		del_timer_sync(&hisi_hba->timer);
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 8def327..18dbaff 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -144,6 +144,7 @@
 #define SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF	19
 #define SAS_ECC_INTR_MSK		0x1ec
 #define HGC_ERR_STAT_EN			0x238
+#define CQE_SEND_CNT			0x248
 #define DLVRY_Q_0_BASE_ADDR_LO		0x260
 #define DLVRY_Q_0_BASE_ADDR_HI		0x264
 #define DLVRY_Q_0_DEPTH			0x268
@@ -3501,6 +3502,23 @@ static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	return 0;
 }
 
+static void wait_cmds_complete_timeout_v2_hw(struct hisi_hba *hisi_hba,
+					     int delay_ms, int timeout_ms)
+{
+	struct device *dev = hisi_hba->dev;
+	int entries, entries_old = 0, time;
+
+	for (time = 0; time < timeout_ms; time += delay_ms) {
+		entries = hisi_sas_read32(hisi_hba, CQE_SEND_CNT);
+		if (entries == entries_old)
+			break;
+
+		entries_old = entries;
+		msleep(delay_ms);
+	}
+
+	dev_dbg(dev, "wait commands complete %dms\n", time);
+}
 
 static struct scsi_host_template sht_v2_hw = {
 	.name			= DRV_NAME,
@@ -3552,6 +3570,7 @@ static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	.soft_reset = soft_reset_v2_hw,
 	.get_phys_state = get_phys_state_v2_hw,
 	.write_gpio = write_gpio_v2_hw,
+	.wait_cmds_complete_timeout = wait_cmds_complete_timeout_v2_hw,
 	.sht = &sht_v2_hw,
 };
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 13d2134..dd5f542 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -92,6 +92,7 @@
 #define SAS_ECC_INTR			0x1e8
 #define SAS_ECC_INTR_MSK		0x1ec
 #define HGC_ERR_STAT_EN			0x238
+#define CQE_SEND_CNT			0x248
 #define DLVRY_Q_0_BASE_ADDR_LO		0x260
 #define DLVRY_Q_0_BASE_ADDR_HI		0x264
 #define DLVRY_Q_0_DEPTH			0x268
@@ -2015,6 +2016,24 @@ static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	return 0;
 }
 
+static void wait_cmds_complete_timeout_v3_hw(struct hisi_hba *hisi_hba,
+					     int delay_ms, int timeout_ms)
+{
+	struct device *dev = hisi_hba->dev;
+	int entries, entries_old = 0, time;
+
+	for (time = 0; time < timeout_ms; time += delay_ms) {
+		entries = hisi_sas_read32(hisi_hba, CQE_SEND_CNT);
+		if (entries == entries_old)
+			break;
+
+		entries_old = entries;
+		msleep(delay_ms);
+	}
+
+	dev_dbg(dev, "wait commands complete %dms\n", time);
+}
+
 static struct scsi_host_template sht_v3_hw = {
 	.name			= DRV_NAME,
 	.module			= THIS_MODULE,
@@ -2063,6 +2082,7 @@ static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 	.get_phys_state = get_phys_state_v3_hw,
 	.get_events = phy_get_events_v3_hw,
 	.write_gpio = write_gpio_v3_hw,
+	.wait_cmds_complete_timeout = wait_cmds_complete_timeout_v3_hw,
 };
 
 static struct Scsi_Host *
-- 
1.9.1

[PATCH 09/13] scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

In future scenarios we will want to use the TMF struct
for more task types than SSP.

As such, we can add struct hisi_sas_tmf_task directly into
struct hisi_sas_slot, and this will mean we can remove
the TMF parameters from the task prep functions.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       | 14 +++++++-------
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 15 +++++++--------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 12 ++++++------
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 10 +++++-----
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 10 +++++-----
 5 files changed, 30 insertions(+), 31 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 8ce6abb..60bd652 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -179,6 +179,11 @@ struct hisi_sas_device {
 	u8 dev_status;
 };
 
+struct hisi_sas_tmf_task {
+	u8 tmf;
+	u16 tag_of_task_to_be_managed;
+};
+
 struct hisi_sas_slot {
 	struct list_head entry;
 	struct list_head delivery;
@@ -199,11 +204,7 @@ struct hisi_sas_slot {
 	struct work_struct abort_slot;
 	struct timer_list internal_abort_timer;
 	bool is_internal;
-};
-
-struct hisi_sas_tmf_task {
-	u8 tmf;
-	u16 tag_of_task_to_be_managed;
+	struct hisi_sas_tmf_task *tmf;
 };
 
 struct hisi_sas_hw {
@@ -217,8 +218,7 @@ struct hisi_sas_hw {
 	int (*get_free_slot)(struct hisi_hba *hisi_hba, struct hisi_sas_dq *dq);
 	void (*start_delivery)(struct hisi_sas_dq *dq);
 	void (*prep_ssp)(struct hisi_hba *hisi_hba,
-			struct hisi_sas_slot *slot, int is_tmf,
-			struct hisi_sas_tmf_task *tmf);
+			struct hisi_sas_slot *slot);
 	void (*prep_smp)(struct hisi_hba *hisi_hba,
 			struct hisi_sas_slot *slot);
 	void (*prep_stp)(struct hisi_hba *hisi_hba,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index a6fcfb3..d613b68 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -266,10 +266,9 @@ static void hisi_sas_task_prep_smp(struct hisi_hba *hisi_hba,
 }
 
 static void hisi_sas_task_prep_ssp(struct hisi_hba *hisi_hba,
-				  struct hisi_sas_slot *slot, int is_tmf,
-				  struct hisi_sas_tmf_task *tmf)
+				  struct hisi_sas_slot *slot)
 {
-	hisi_hba->hw->prep_ssp(hisi_hba, slot, is_tmf, tmf);
+	hisi_hba->hw->prep_ssp(hisi_hba, slot);
 }
 
 static void hisi_sas_task_prep_ata(struct hisi_hba *hisi_hba,
@@ -322,7 +321,7 @@ static void hisi_sas_slot_abort(struct work_struct *work)
 
 static int hisi_sas_task_prep(struct sas_task *task,
 			      struct hisi_sas_dq **dq_pointer,
-			      int is_tmf, struct hisi_sas_tmf_task *tmf,
+			      bool is_tmf, struct hisi_sas_tmf_task *tmf,
 			      int *pass)
 {
 	struct domain_device *device = task->dev;
@@ -461,8 +460,8 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	slot->cmd_hdr = &cmd_hdr_base[dlvry_queue_slot];
 	slot->task = task;
 	slot->port = port;
-	if (is_tmf)
-		slot->is_internal = true;
+	slot->tmf = tmf;
+	slot->is_internal = is_tmf;
 	task->lldd_task = slot;
 	INIT_WORK(&slot->abort_slot, hisi_sas_slot_abort);
 
@@ -475,7 +474,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 		hisi_sas_task_prep_smp(hisi_hba, slot);
 		break;
 	case SAS_PROTOCOL_SSP:
-		hisi_sas_task_prep_ssp(hisi_hba, slot, is_tmf, tmf);
+		hisi_sas_task_prep_ssp(hisi_hba, slot);
 		break;
 	case SAS_PROTOCOL_SATA:
 	case SAS_PROTOCOL_STP:
@@ -527,7 +526,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 }
 
 static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags,
-			      int is_tmf, struct hisi_sas_tmf_task *tmf)
+			      bool is_tmf, struct hisi_sas_tmf_task *tmf)
 {
 	u32 rc;
 	u32 pass = 0;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 8d5d857..05609ac 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -986,8 +986,7 @@ static void prep_smp_v1_hw(struct hisi_hba *hisi_hba,
 }
 
 static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
-			  struct hisi_sas_slot *slot, int is_tmf,
-			  struct hisi_sas_tmf_task *tmf)
+			  struct hisi_sas_slot *slot)
 {
 	struct sas_task *task = slot->task;
 	struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
@@ -996,7 +995,8 @@ static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
 	struct hisi_sas_port *port = slot->port;
 	struct sas_ssp_task *ssp_task = &task->ssp_task;
 	struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
-	int has_data = 0, priority = is_tmf;
+	struct hisi_sas_tmf_task *tmf = slot->tmf;
+	int has_data = 0, priority = !!tmf;
 	u8 *buf_cmd, fburst = 0;
 	u32 dw1, dw2;
 
@@ -1010,7 +1010,7 @@ static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
 
 	dw1 = 1 << CMD_HDR_VERIFY_DTL_OFF;
 
-	if (is_tmf) {
+	if (tmf) {
 		dw1 |= 3 << CMD_HDR_SSP_FRAME_TYPE_OFF;
 	} else {
 		switch (scsi_cmnd->sc_data_direction) {
@@ -1031,7 +1031,7 @@ static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
 	dw1 |= sas_dev->device_id << CMD_HDR_DEVICE_ID_OFF;
 	hdr->dw1 = cpu_to_le32(dw1);
 
-	if (is_tmf) {
+	if (tmf) {
 		dw2 = ((sizeof(struct ssp_tmf_iu) +
 			sizeof(struct ssp_frame_hdr)+3)/4) <<
 			CMD_HDR_CFL_OFF;
@@ -1062,7 +1062,7 @@ static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
 	hdr->dw2 = cpu_to_le32(dw2);
 
 	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
-	if (!is_tmf) {
+	if (!tmf) {
 		buf_cmd[9] = fburst | task->ssp_task.task_attr |
 				(task->ssp_task.task_prio << 3);
 		memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 18dbaff..fafb3f1 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1745,8 +1745,7 @@ static void prep_smp_v2_hw(struct hisi_hba *hisi_hba,
 }
 
 static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba,
-			  struct hisi_sas_slot *slot, int is_tmf,
-			  struct hisi_sas_tmf_task *tmf)
+			  struct hisi_sas_slot *slot)
 {
 	struct sas_task *task = slot->task;
 	struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
@@ -1755,7 +1754,8 @@ static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba,
 	struct hisi_sas_port *port = slot->port;
 	struct sas_ssp_task *ssp_task = &task->ssp_task;
 	struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
-	int has_data = 0, priority = is_tmf;
+	struct hisi_sas_tmf_task *tmf = slot->tmf;
+	int has_data = 0, priority = !!tmf;
 	u8 *buf_cmd;
 	u32 dw1 = 0, dw2 = 0;
 
@@ -1766,7 +1766,7 @@ static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba,
 			       (1 << CMD_HDR_CMD_OFF)); /* ssp */
 
 	dw1 = 1 << CMD_HDR_VDTL_OFF;
-	if (is_tmf) {
+	if (tmf) {
 		dw1 |= 2 << CMD_HDR_FRAME_TYPE_OFF;
 		dw1 |= DIR_NO_DATA << CMD_HDR_DIR_OFF;
 	} else {
@@ -1809,7 +1809,7 @@ static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba,
 		sizeof(struct ssp_frame_hdr);
 
 	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
-	if (!is_tmf) {
+	if (!tmf) {
 		buf_cmd[9] = task->ssp_task.task_attr |
 				(task->ssp_task.task_prio << 3);
 		memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index dd5f542..8c996aa 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -911,8 +911,7 @@ static void prep_prd_sge_v3_hw(struct hisi_hba *hisi_hba,
 }
 
 static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
-			  struct hisi_sas_slot *slot, int is_tmf,
-			  struct hisi_sas_tmf_task *tmf)
+			  struct hisi_sas_slot *slot)
 {
 	struct sas_task *task = slot->task;
 	struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
@@ -921,7 +920,8 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	struct hisi_sas_port *port = slot->port;
 	struct sas_ssp_task *ssp_task = &task->ssp_task;
 	struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
-	int has_data = 0, priority = is_tmf;
+	struct hisi_sas_tmf_task *tmf = slot->tmf;
+	int has_data = 0, priority = !!tmf;
 	u8 *buf_cmd;
 	u32 dw1 = 0, dw2 = 0;
 
@@ -932,7 +932,7 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 			       (1 << CMD_HDR_CMD_OFF)); /* ssp */
 
 	dw1 = 1 << CMD_HDR_VDTL_OFF;
-	if (is_tmf) {
+	if (tmf) {
 		dw1 |= 2 << CMD_HDR_FRAME_TYPE_OFF;
 		dw1 |= DIR_NO_DATA << CMD_HDR_DIR_OFF;
 	} else {
@@ -974,7 +974,7 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 		sizeof(struct ssp_frame_hdr);
 
 	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
-	if (!is_tmf) {
+	if (!tmf) {
 		buf_cmd[9] = ssp_task->task_attr | (ssp_task->task_prio << 3);
 		memcpy(buf_cmd + 12, scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
 	} else {
-- 
1.9.1

[PATCH 09/13] scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

In future scenarios we will want to use the TMF struct
for more task types than SSP.

As such, we can add struct hisi_sas_tmf_task directly into
struct hisi_sas_slot, and this will mean we can remove
the TMF parameters from the task prep functions.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       | 14 +++++++-------
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 15 +++++++--------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 12 ++++++------
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 10 +++++-----
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 10 +++++-----
 5 files changed, 30 insertions(+), 31 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 8ce6abb..60bd652 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -179,6 +179,11 @@ struct hisi_sas_device {
 	u8 dev_status;
 };
 
+struct hisi_sas_tmf_task {
+	u8 tmf;
+	u16 tag_of_task_to_be_managed;
+};
+
 struct hisi_sas_slot {
 	struct list_head entry;
 	struct list_head delivery;
@@ -199,11 +204,7 @@ struct hisi_sas_slot {
 	struct work_struct abort_slot;
 	struct timer_list internal_abort_timer;
 	bool is_internal;
-};
-
-struct hisi_sas_tmf_task {
-	u8 tmf;
-	u16 tag_of_task_to_be_managed;
+	struct hisi_sas_tmf_task *tmf;
 };
 
 struct hisi_sas_hw {
@@ -217,8 +218,7 @@ struct hisi_sas_hw {
 	int (*get_free_slot)(struct hisi_hba *hisi_hba, struct hisi_sas_dq *dq);
 	void (*start_delivery)(struct hisi_sas_dq *dq);
 	void (*prep_ssp)(struct hisi_hba *hisi_hba,
-			struct hisi_sas_slot *slot, int is_tmf,
-			struct hisi_sas_tmf_task *tmf);
+			struct hisi_sas_slot *slot);
 	void (*prep_smp)(struct hisi_hba *hisi_hba,
 			struct hisi_sas_slot *slot);
 	void (*prep_stp)(struct hisi_hba *hisi_hba,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index a6fcfb3..d613b68 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -266,10 +266,9 @@ static void hisi_sas_task_prep_smp(struct hisi_hba *hisi_hba,
 }
 
 static void hisi_sas_task_prep_ssp(struct hisi_hba *hisi_hba,
-				  struct hisi_sas_slot *slot, int is_tmf,
-				  struct hisi_sas_tmf_task *tmf)
+				  struct hisi_sas_slot *slot)
 {
-	hisi_hba->hw->prep_ssp(hisi_hba, slot, is_tmf, tmf);
+	hisi_hba->hw->prep_ssp(hisi_hba, slot);
 }
 
 static void hisi_sas_task_prep_ata(struct hisi_hba *hisi_hba,
@@ -322,7 +321,7 @@ static void hisi_sas_slot_abort(struct work_struct *work)
 
 static int hisi_sas_task_prep(struct sas_task *task,
 			      struct hisi_sas_dq **dq_pointer,
-			      int is_tmf, struct hisi_sas_tmf_task *tmf,
+			      bool is_tmf, struct hisi_sas_tmf_task *tmf,
 			      int *pass)
 {
 	struct domain_device *device = task->dev;
@@ -461,8 +460,8 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	slot->cmd_hdr = &cmd_hdr_base[dlvry_queue_slot];
 	slot->task = task;
 	slot->port = port;
-	if (is_tmf)
-		slot->is_internal = true;
+	slot->tmf = tmf;
+	slot->is_internal = is_tmf;
 	task->lldd_task = slot;
 	INIT_WORK(&slot->abort_slot, hisi_sas_slot_abort);
 
@@ -475,7 +474,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 		hisi_sas_task_prep_smp(hisi_hba, slot);
 		break;
 	case SAS_PROTOCOL_SSP:
-		hisi_sas_task_prep_ssp(hisi_hba, slot, is_tmf, tmf);
+		hisi_sas_task_prep_ssp(hisi_hba, slot);
 		break;
 	case SAS_PROTOCOL_SATA:
 	case SAS_PROTOCOL_STP:
@@ -527,7 +526,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 }
 
 static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags,
-			      int is_tmf, struct hisi_sas_tmf_task *tmf)
+			      bool is_tmf, struct hisi_sas_tmf_task *tmf)
 {
 	u32 rc;
 	u32 pass = 0;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 8d5d857..05609ac 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -986,8 +986,7 @@ static void prep_smp_v1_hw(struct hisi_hba *hisi_hba,
 }
 
 static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
-			  struct hisi_sas_slot *slot, int is_tmf,
-			  struct hisi_sas_tmf_task *tmf)
+			  struct hisi_sas_slot *slot)
 {
 	struct sas_task *task = slot->task;
 	struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
@@ -996,7 +995,8 @@ static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
 	struct hisi_sas_port *port = slot->port;
 	struct sas_ssp_task *ssp_task = &task->ssp_task;
 	struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
-	int has_data = 0, priority = is_tmf;
+	struct hisi_sas_tmf_task *tmf = slot->tmf;
+	int has_data = 0, priority = !!tmf;
 	u8 *buf_cmd, fburst = 0;
 	u32 dw1, dw2;
 
@@ -1010,7 +1010,7 @@ static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
 
 	dw1 = 1 << CMD_HDR_VERIFY_DTL_OFF;
 
-	if (is_tmf) {
+	if (tmf) {
 		dw1 |= 3 << CMD_HDR_SSP_FRAME_TYPE_OFF;
 	} else {
 		switch (scsi_cmnd->sc_data_direction) {
@@ -1031,7 +1031,7 @@ static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
 	dw1 |= sas_dev->device_id << CMD_HDR_DEVICE_ID_OFF;
 	hdr->dw1 = cpu_to_le32(dw1);
 
-	if (is_tmf) {
+	if (tmf) {
 		dw2 = ((sizeof(struct ssp_tmf_iu) +
 			sizeof(struct ssp_frame_hdr)+3)/4) <<
 			CMD_HDR_CFL_OFF;
@@ -1062,7 +1062,7 @@ static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
 	hdr->dw2 = cpu_to_le32(dw2);
 
 	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
-	if (!is_tmf) {
+	if (!tmf) {
 		buf_cmd[9] = fburst | task->ssp_task.task_attr |
 				(task->ssp_task.task_prio << 3);
 		memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 18dbaff..fafb3f1 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1745,8 +1745,7 @@ static void prep_smp_v2_hw(struct hisi_hba *hisi_hba,
 }
 
 static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba,
-			  struct hisi_sas_slot *slot, int is_tmf,
-			  struct hisi_sas_tmf_task *tmf)
+			  struct hisi_sas_slot *slot)
 {
 	struct sas_task *task = slot->task;
 	struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
@@ -1755,7 +1754,8 @@ static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba,
 	struct hisi_sas_port *port = slot->port;
 	struct sas_ssp_task *ssp_task = &task->ssp_task;
 	struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
-	int has_data = 0, priority = is_tmf;
+	struct hisi_sas_tmf_task *tmf = slot->tmf;
+	int has_data = 0, priority = !!tmf;
 	u8 *buf_cmd;
 	u32 dw1 = 0, dw2 = 0;
 
@@ -1766,7 +1766,7 @@ static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba,
 			       (1 << CMD_HDR_CMD_OFF)); /* ssp */
 
 	dw1 = 1 << CMD_HDR_VDTL_OFF;
-	if (is_tmf) {
+	if (tmf) {
 		dw1 |= 2 << CMD_HDR_FRAME_TYPE_OFF;
 		dw1 |= DIR_NO_DATA << CMD_HDR_DIR_OFF;
 	} else {
@@ -1809,7 +1809,7 @@ static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba,
 		sizeof(struct ssp_frame_hdr);
 
 	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
-	if (!is_tmf) {
+	if (!tmf) {
 		buf_cmd[9] = task->ssp_task.task_attr |
 				(task->ssp_task.task_prio << 3);
 		memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index dd5f542..8c996aa 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -911,8 +911,7 @@ static void prep_prd_sge_v3_hw(struct hisi_hba *hisi_hba,
 }
 
 static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
-			  struct hisi_sas_slot *slot, int is_tmf,
-			  struct hisi_sas_tmf_task *tmf)
+			  struct hisi_sas_slot *slot)
 {
 	struct sas_task *task = slot->task;
 	struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
@@ -921,7 +920,8 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	struct hisi_sas_port *port = slot->port;
 	struct sas_ssp_task *ssp_task = &task->ssp_task;
 	struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
-	int has_data = 0, priority = is_tmf;
+	struct hisi_sas_tmf_task *tmf = slot->tmf;
+	int has_data = 0, priority = !!tmf;
 	u8 *buf_cmd;
 	u32 dw1 = 0, dw2 = 0;
 
@@ -932,7 +932,7 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 			       (1 << CMD_HDR_CMD_OFF)); /* ssp */
 
 	dw1 = 1 << CMD_HDR_VDTL_OFF;
-	if (is_tmf) {
+	if (tmf) {
 		dw1 |= 2 << CMD_HDR_FRAME_TYPE_OFF;
 		dw1 |= DIR_NO_DATA << CMD_HDR_DIR_OFF;
 	} else {
@@ -974,7 +974,7 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 		sizeof(struct ssp_frame_hdr);
 
 	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
-	if (!is_tmf) {
+	if (!tmf) {
 		buf_cmd[9] = ssp_task->task_attr | (ssp_task->task_prio << 3);
 		memcpy(buf_cmd + 12, scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
 	} else {
-- 
1.9.1

[PATCH 10/13] scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

This patch adds an force PHY function for internal ATA command for
v2 hw.

Because there is an SoC bug of v2 hw, and need send an IO through
each PHY of a port to workaround a bug which occurs after a
controller reset.

This force PHY function will be used in the later patch.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  2 ++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 11 +++++++++++
 2 files changed, 13 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 60bd652..9400824 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -180,6 +180,8 @@ struct hisi_sas_device {
 };
 
 struct hisi_sas_tmf_task {
+	int force_phy;
+	int phy_id;
 	u8 tmf;
 	u16 tag_of_task_to_be_managed;
 };
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index fafb3f1..369ef7e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -296,6 +296,10 @@
 #define CMD_HDR_RESP_REPORT_MSK		(0x1 << CMD_HDR_RESP_REPORT_OFF)
 #define CMD_HDR_TLR_CTRL_OFF		6
 #define CMD_HDR_TLR_CTRL_MSK		(0x3 << CMD_HDR_TLR_CTRL_OFF)
+#define CMD_HDR_PHY_ID_OFF		8
+#define CMD_HDR_PHY_ID_MSK		(0x1ff << CMD_HDR_PHY_ID_OFF)
+#define CMD_HDR_FORCE_PHY_OFF		17
+#define CMD_HDR_FORCE_PHY_MSK		(0x1 << CMD_HDR_FORCE_PHY_OFF)
 #define CMD_HDR_PORT_OFF		18
 #define CMD_HDR_PORT_MSK		(0xf << CMD_HDR_PORT_OFF)
 #define CMD_HDR_PRIORITY_OFF		27
@@ -2512,6 +2516,7 @@ static void prep_ata_v2_hw(struct hisi_hba *hisi_hba,
 	struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
 	struct asd_sas_port *sas_port = device->port;
 	struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
+	struct hisi_sas_tmf_task *tmf = slot->tmf;
 	u8 *buf_cmd;
 	int has_data = 0, hdr_tag = 0;
 	u32 dw1 = 0, dw2 = 0;
@@ -2524,6 +2529,12 @@ static void prep_ata_v2_hw(struct hisi_hba *hisi_hba,
 	else
 		hdr->dw0 |= cpu_to_le32(4 << CMD_HDR_CMD_OFF);
 
+	if (tmf && tmf->force_phy) {
+		hdr->dw0 |= CMD_HDR_FORCE_PHY_MSK;
+		hdr->dw0 |= cpu_to_le32((1 << tmf->phy_id)
+				<< CMD_HDR_PHY_ID_OFF);
+	}
+
 	/* dw1 */
 	switch (task->data_dir) {
 	case DMA_TO_DEVICE:
-- 
1.9.1

[PATCH 10/13] scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

This patch adds an force PHY function for internal ATA command for
v2 hw.

Because there is an SoC bug of v2 hw, and need send an IO through
each PHY of a port to workaround a bug which occurs after a
controller reset.

This force PHY function will be used in the later patch.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  2 ++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 11 +++++++++++
 2 files changed, 13 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 60bd652..9400824 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -180,6 +180,8 @@ struct hisi_sas_device {
 };
 
 struct hisi_sas_tmf_task {
+	int force_phy;
+	int phy_id;
 	u8 tmf;
 	u16 tag_of_task_to_be_managed;
 };
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index fafb3f1..369ef7e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -296,6 +296,10 @@
 #define CMD_HDR_RESP_REPORT_MSK		(0x1 << CMD_HDR_RESP_REPORT_OFF)
 #define CMD_HDR_TLR_CTRL_OFF		6
 #define CMD_HDR_TLR_CTRL_MSK		(0x3 << CMD_HDR_TLR_CTRL_OFF)
+#define CMD_HDR_PHY_ID_OFF		8
+#define CMD_HDR_PHY_ID_MSK		(0x1ff << CMD_HDR_PHY_ID_OFF)
+#define CMD_HDR_FORCE_PHY_OFF		17
+#define CMD_HDR_FORCE_PHY_MSK		(0x1 << CMD_HDR_FORCE_PHY_OFF)
 #define CMD_HDR_PORT_OFF		18
 #define CMD_HDR_PORT_MSK		(0xf << CMD_HDR_PORT_OFF)
 #define CMD_HDR_PRIORITY_OFF		27
@@ -2512,6 +2516,7 @@ static void prep_ata_v2_hw(struct hisi_hba *hisi_hba,
 	struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
 	struct asd_sas_port *sas_port = device->port;
 	struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
+	struct hisi_sas_tmf_task *tmf = slot->tmf;
 	u8 *buf_cmd;
 	int has_data = 0, hdr_tag = 0;
 	u32 dw1 = 0, dw2 = 0;
@@ -2524,6 +2529,12 @@ static void prep_ata_v2_hw(struct hisi_hba *hisi_hba,
 	else
 		hdr->dw0 |= cpu_to_le32(4 << CMD_HDR_CMD_OFF);
 
+	if (tmf && tmf->force_phy) {
+		hdr->dw0 |= CMD_HDR_FORCE_PHY_MSK;
+		hdr->dw0 |= cpu_to_le32((1 << tmf->phy_id)
+				<< CMD_HDR_PHY_ID_OFF);
+	}
+
 	/* dw1 */
 	switch (task->data_dir) {
 	case DMA_TO_DEVICE:
-- 
1.9.1

[PATCH 11/13] scsi: hisi_sas: Terminate STP reject quickly for v2 hw

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

For v2 hw, STP link from target is rejected after host reset
because of a SoC bug. The STP reject will be terminated after
we have sent IO from each PHY of a port.

This is not an problem before, as we don't need to setup STP
link from target immediately after host reset. But now, it is.
Because we want to send soft-reset immediately after host reset.

In order to terminate STP reject quickly, this patch send ATA
reset command through each PHY of a port. Notes: ATA reset
command don't need target's response.

Besides, we do abort dev for each device before terminating STP
reject. This is a quirk of v2 hw.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 78 +++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d613b68..2e02539 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1275,6 +1275,81 @@ static void hisi_sas_reset_init_all_devices(struct hisi_hba *hisi_hba)
 	}
 }
 
+static void hisi_sas_send_ata_reset_each_phy(struct hisi_hba *hisi_hba,
+					     struct asd_sas_port *sas_port,
+					     struct domain_device *device)
+{
+	struct hisi_sas_tmf_task tmf_task = { .force_phy = 1 };
+	struct ata_port *ap = device->sata_dev.ap;
+	struct device *dev = hisi_hba->dev;
+	int s = sizeof(struct host_to_dev_fis);
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct asd_sas_phy *sas_phy;
+	struct ata_link *link;
+	u8 fis[20] = {0};
+	u32 state;
+
+	state = hisi_hba->hw->get_phys_state(hisi_hba);
+	list_for_each_entry(sas_phy, &sas_port->phy_list, port_phy_el) {
+		if (!(state & BIT(sas_phy->id)))
+			continue;
+
+		ata_for_each_link(link, ap, EDGE) {
+			int pmp = sata_srst_pmp(link);
+
+			tmf_task.phy_id = sas_phy->id;
+			hisi_sas_fill_ata_reset_cmd(link->device, 1, pmp, fis);
+			rc = hisi_sas_exec_internal_tmf_task(device, fis, s,
+							     &tmf_task);
+			if (rc != TMF_RESP_FUNC_COMPLETE) {
+				dev_err(dev, "phy%d ata reset failed rc=%d\n",
+					sas_phy->id, rc);
+				break;
+			}
+		}
+	}
+}
+
+static void hisi_sas_terminate_stp_reject(struct hisi_hba *hisi_hba)
+{
+	struct device *dev = hisi_hba->dev;
+	int port_no, rc, i;
+
+	for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+		struct hisi_sas_device *sas_dev = &hisi_hba->devices[i];
+		struct domain_device *device = sas_dev->sas_device;
+
+		if ((sas_dev->dev_type == SAS_PHY_UNUSED) || !device)
+			continue;
+
+		rc = hisi_sas_internal_task_abort(hisi_hba, device,
+						  HISI_SAS_INT_ABT_DEV, 0);
+		if (rc < 0)
+			dev_err(dev, "STP reject: abort dev failed %d\n", rc);
+	}
+
+	for (port_no = 0; port_no < hisi_hba->n_phy; port_no++) {
+		struct hisi_sas_port *port = &hisi_hba->port[port_no];
+		struct asd_sas_port *sas_port = &port->sas_port;
+		struct domain_device *port_dev = sas_port->port_dev;
+		struct domain_device *device;
+
+		if (!port_dev || !DEV_IS_EXPANDER(port_dev->dev_type))
+			continue;
+
+		/* Try to find a SATA device */
+		list_for_each_entry(device, &sas_port->dev_list,
+				    dev_list_node) {
+			if (dev_is_sata(device)) {
+				hisi_sas_send_ata_reset_each_phy(hisi_hba,
+								 sas_port,
+								 device);
+				break;
+			}
+		}
+	}
+}
+
 static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 {
 	struct device *dev = hisi_hba->dev;
@@ -1312,6 +1387,9 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 	hisi_hba->hw->phys_init(hisi_hba);
 	msleep(1000);
 	hisi_sas_refresh_port_id(hisi_hba);
+
+	if (hisi_hba->reject_stp_links_msk)
+		hisi_sas_terminate_stp_reject(hisi_hba);
 	hisi_sas_reset_init_all_devices(hisi_hba);
 	scsi_unblock_requests(shost);
 
-- 
1.9.1

[PATCH 11/13] scsi: hisi_sas: Terminate STP reject quickly for v2 hw

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

For v2 hw, STP link from target is rejected after host reset
because of a SoC bug. The STP reject will be terminated after
we have sent IO from each PHY of a port.

This is not an problem before, as we don't need to setup STP
link from target immediately after host reset. But now, it is.
Because we want to send soft-reset immediately after host reset.

In order to terminate STP reject quickly, this patch send ATA
reset command through each PHY of a port. Notes: ATA reset
command don't need target's response.

Besides, we do abort dev for each device before terminating STP
reject. This is a quirk of v2 hw.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 78 +++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d613b68..2e02539 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1275,6 +1275,81 @@ static void hisi_sas_reset_init_all_devices(struct hisi_hba *hisi_hba)
 	}
 }
 
+static void hisi_sas_send_ata_reset_each_phy(struct hisi_hba *hisi_hba,
+					     struct asd_sas_port *sas_port,
+					     struct domain_device *device)
+{
+	struct hisi_sas_tmf_task tmf_task = { .force_phy = 1 };
+	struct ata_port *ap = device->sata_dev.ap;
+	struct device *dev = hisi_hba->dev;
+	int s = sizeof(struct host_to_dev_fis);
+	int rc = TMF_RESP_FUNC_FAILED;
+	struct asd_sas_phy *sas_phy;
+	struct ata_link *link;
+	u8 fis[20] = {0};
+	u32 state;
+
+	state = hisi_hba->hw->get_phys_state(hisi_hba);
+	list_for_each_entry(sas_phy, &sas_port->phy_list, port_phy_el) {
+		if (!(state & BIT(sas_phy->id)))
+			continue;
+
+		ata_for_each_link(link, ap, EDGE) {
+			int pmp = sata_srst_pmp(link);
+
+			tmf_task.phy_id = sas_phy->id;
+			hisi_sas_fill_ata_reset_cmd(link->device, 1, pmp, fis);
+			rc = hisi_sas_exec_internal_tmf_task(device, fis, s,
+							     &tmf_task);
+			if (rc != TMF_RESP_FUNC_COMPLETE) {
+				dev_err(dev, "phy%d ata reset failed rc=%d\n",
+					sas_phy->id, rc);
+				break;
+			}
+		}
+	}
+}
+
+static void hisi_sas_terminate_stp_reject(struct hisi_hba *hisi_hba)
+{
+	struct device *dev = hisi_hba->dev;
+	int port_no, rc, i;
+
+	for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+		struct hisi_sas_device *sas_dev = &hisi_hba->devices[i];
+		struct domain_device *device = sas_dev->sas_device;
+
+		if ((sas_dev->dev_type == SAS_PHY_UNUSED) || !device)
+			continue;
+
+		rc = hisi_sas_internal_task_abort(hisi_hba, device,
+						  HISI_SAS_INT_ABT_DEV, 0);
+		if (rc < 0)
+			dev_err(dev, "STP reject: abort dev failed %d\n", rc);
+	}
+
+	for (port_no = 0; port_no < hisi_hba->n_phy; port_no++) {
+		struct hisi_sas_port *port = &hisi_hba->port[port_no];
+		struct asd_sas_port *sas_port = &port->sas_port;
+		struct domain_device *port_dev = sas_port->port_dev;
+		struct domain_device *device;
+
+		if (!port_dev || !DEV_IS_EXPANDER(port_dev->dev_type))
+			continue;
+
+		/* Try to find a SATA device */
+		list_for_each_entry(device, &sas_port->dev_list,
+				    dev_list_node) {
+			if (dev_is_sata(device)) {
+				hisi_sas_send_ata_reset_each_phy(hisi_hba,
+								 sas_port,
+								 device);
+				break;
+			}
+		}
+	}
+}
+
 static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 {
 	struct device *dev = hisi_hba->dev;
@@ -1312,6 +1387,9 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 	hisi_hba->hw->phys_init(hisi_hba);
 	msleep(1000);
 	hisi_sas_refresh_port_id(hisi_hba);
+
+	if (hisi_hba->reject_stp_links_msk)
+		hisi_sas_terminate_stp_reject(hisi_hba);
 	hisi_sas_reset_init_all_devices(hisi_hba);
 	scsi_unblock_requests(shost);
 
-- 
1.9.1

[PATCH 12/13] scsi: hisi_sas: Fix return value when get_free_slot() failed

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

It is an step of executing task to get free slot. If the step
fails, we will cleanup LLDD resources and should return failure
to upper layer or internal caller to abort task execution of this
time.

But in the current code, the caller of get_free_slot() doesn't
return failure when get_free_slot() failed. This patch is to fix
it.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 2e02539..f6c4eb6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -443,6 +443,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	wr_q_index = hisi_hba->hw->get_free_slot(hisi_hba, dq);
 	if (wr_q_index < 0) {
 		spin_unlock_irqrestore(&dq->lock, flags_dq);
+		rc = -EAGAIN;
 		goto err_out_buf;
 	}
 
@@ -1708,6 +1709,7 @@ static int hisi_sas_query_task(struct sas_task *task)
 	wr_q_index = hisi_hba->hw->get_free_slot(hisi_hba, dq);
 	if (wr_q_index < 0) {
 		spin_unlock_irqrestore(&dq->lock, flags_dq);
+		rc = -EAGAIN;
 		goto err_out_buf;
 	}
 	list_add_tail(&slot->delivery, &dq->list);
-- 
1.9.1

[PATCH 12/13] scsi: hisi_sas: Fix return value when get_free_slot() failed

[John Garry]

From: Xiaofei Tan <tanxiaofei@huawei.com>

It is an step of executing task to get free slot. If the step
fails, we will cleanup LLDD resources and should return failure
to upper layer or internal caller to abort task execution of this
time.

But in the current code, the caller of get_free_slot() doesn't
return failure when get_free_slot() failed. This patch is to fix
it.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 2e02539..f6c4eb6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -443,6 +443,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	wr_q_index = hisi_hba->hw->get_free_slot(hisi_hba, dq);
 	if (wr_q_index < 0) {
 		spin_unlock_irqrestore(&dq->lock, flags_dq);
+		rc = -EAGAIN;
 		goto err_out_buf;
 	}
 
@@ -1708,6 +1709,7 @@ static int hisi_sas_query_task(struct sas_task *task)
 	wr_q_index = hisi_hba->hw->get_free_slot(hisi_hba, dq);
 	if (wr_q_index < 0) {
 		spin_unlock_irqrestore(&dq->lock, flags_dq);
+		rc = -EAGAIN;
 		goto err_out_buf;
 	}
 	list_add_tail(&slot->delivery, &dq->list);
-- 
1.9.1

[PATCH 13/13] scsi: hisi_sas: Mark PHY as in reset for nexus reset

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

When issunig a  nexus reset for directly attached device,
we want to ignore the PHY down events so libsas will not
deform and reform the port.

In the case that the attached SAS changes for the reset,
libsas will deform and form a port.

For scenario that the PHY does not come up after a timeout
period, then report the PHY down to libsas.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  5 ++++-
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 40 ++++++++++++++++++++++++++++++----
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |  8 +++++++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 14 ++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c |  7 ++++++
 5 files changed, 69 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 9400824..7052a5d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -136,11 +136,14 @@ struct hisi_sas_phy {
 	struct hisi_sas_port	*port;
 	struct asd_sas_phy	sas_phy;
 	struct sas_identify	identify;
+	struct completion *reset_completion;
+	spinlock_t lock;
 	u64		port_id; /* from hw */
 	u64		frame_rcvd_size;
 	u8		frame_rcvd[32];
 	u8		phy_attached;
-	u8		reserved[3];
+	u8		in_reset;
+	u8		reserved[2];
 	u32		phy_type;
 	enum sas_linkrate	minimum_linkrate;
 	enum sas_linkrate	maximum_linkrate;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index f6c4eb6..9adf18c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1529,12 +1529,39 @@ static int hisi_sas_clear_aca(struct domain_device *device, u8 *lun)
 
 static int hisi_sas_debug_I_T_nexus_reset(struct domain_device *device)
 {
-	struct sas_phy *phy = sas_get_local_phy(device);
+	struct sas_phy *local_phy = sas_get_local_phy(device);
 	int rc, reset_type = (device->dev_type == SAS_SATA_DEV ||
 			(device->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
-	rc = sas_phy_reset(phy, reset_type);
-	sas_put_local_phy(phy);
-	msleep(2000);
+	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+	struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[local_phy->number];
+	struct hisi_sas_phy *phy = container_of(sas_phy,
+			struct hisi_sas_phy, sas_phy);
+	DECLARE_COMPLETION_ONSTACK(phyreset);
+
+	if (scsi_is_sas_phy_local(local_phy)) {
+		phy->in_reset = 1;
+		phy->reset_completion = &phyreset;
+	}
+
+	rc = sas_phy_reset(local_phy, reset_type);
+	sas_put_local_phy(local_phy);
+
+	if (scsi_is_sas_phy_local(local_phy)) {
+		int ret = wait_for_completion_timeout(&phyreset, 2 * HZ);
+		unsigned long flags;
+
+		spin_lock_irqsave(&phy->lock, flags);
+		phy->reset_completion = NULL;
+		phy->in_reset = 0;
+		spin_unlock_irqrestore(&phy->lock, flags);
+
+		/* report PHY down if timed out */
+		if (!ret)
+			hisi_sas_phy_down(hisi_hba, sas_phy->id, 0);
+	} else
+		msleep(2000);
+
 	return rc;
 }
 
@@ -1883,6 +1910,7 @@ void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
 	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
 	struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+	struct device *dev = hisi_hba->dev;
 
 	if (rdy) {
 		/* Phy down but ready */
@@ -1891,6 +1919,10 @@ void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
 	} else {
 		struct hisi_sas_port *port  = phy->port;
 
+		if (phy->in_reset) {
+			dev_info(dev, "ignore flutter phy%d down\n", phy_no);
+			return;
+		}
 		/* Phy down and not ready */
 		sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
 		sas_phy_disconnected(sas_phy);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 05609ac..89ab18c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1373,6 +1373,7 @@ static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
 	u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
 	struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
 	irqreturn_t res = IRQ_HANDLED;
+	unsigned long flags;
 
 	irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
 	if (!(irq_value & CHL_INT2_SL_PHY_ENA_MSK)) {
@@ -1426,6 +1427,13 @@ static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
 			SAS_PROTOCOL_SMP;
 	hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
 
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->reset_completion) {
+		phy->in_reset = 0;
+		complete(phy->reset_completion);
+	}
+	spin_unlock_irqrestore(&phy->lock, flags);
+
 end:
 	hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
 			     CHL_INT2_SL_PHY_ENA_MSK);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 369ef7e..213c530 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2661,6 +2661,7 @@ static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
 	struct device *dev = hisi_hba->dev;
 	u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
 	struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
+	unsigned long flags;
 
 	hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1);
 
@@ -2713,6 +2714,12 @@ static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
 			set_link_timer_quirk(hisi_hba);
 	}
 	hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->reset_completion) {
+		phy->in_reset = 0;
+		complete(phy->reset_completion);
+	}
+	spin_unlock_irqrestore(&phy->lock, flags);
 
 end:
 	hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
@@ -3201,6 +3208,7 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
 	u32 ent_tmp, ent_msk, ent_int, port_id, link_rate, hard_phy_linkrate;
 	irqreturn_t res = IRQ_HANDLED;
 	u8 attached_sas_addr[SAS_ADDR_SIZE] = {0};
+	unsigned long flags;
 	int phy_no, offset;
 
 	phy_no = sas_phy->id;
@@ -3275,6 +3283,12 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
 	phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
 	hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
 
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->reset_completion) {
+		phy->in_reset = 0;
+		complete(phy->reset_completion);
+	}
+	spin_unlock_irqrestore(&phy->lock, flags);
 end:
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC1 + offset, ent_tmp);
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1 + offset, ent_msk);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 8c996aa..9f1e2d0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1143,6 +1143,7 @@ static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
 	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
 	struct device *dev = hisi_hba->dev;
+	unsigned long flags;
 
 	hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1);
 
@@ -1211,6 +1212,12 @@ static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
 	phy->phy_attached = 1;
 	hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
 	res = IRQ_HANDLED;
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->reset_completion) {
+		phy->in_reset = 0;
+		complete(phy->reset_completion);
+	}
+	spin_unlock_irqrestore(&phy->lock, flags);
 end:
 	hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
 			     CHL_INT0_SL_PHY_ENABLE_MSK);
-- 
1.9.1

[PATCH 13/13] scsi: hisi_sas: Mark PHY as in reset for nexus reset

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

When issunig a  nexus reset for directly attached device,
we want to ignore the PHY down events so libsas will not
deform and reform the port.

In the case that the attached SAS changes for the reset,
libsas will deform and form a port.

For scenario that the PHY does not come up after a timeout
period, then report the PHY down to libsas.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  5 ++++-
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 40 ++++++++++++++++++++++++++++++----
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |  8 +++++++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 14 ++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c |  7 ++++++
 5 files changed, 69 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 9400824..7052a5d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -136,11 +136,14 @@ struct hisi_sas_phy {
 	struct hisi_sas_port	*port;
 	struct asd_sas_phy	sas_phy;
 	struct sas_identify	identify;
+	struct completion *reset_completion;
+	spinlock_t lock;
 	u64		port_id; /* from hw */
 	u64		frame_rcvd_size;
 	u8		frame_rcvd[32];
 	u8		phy_attached;
-	u8		reserved[3];
+	u8		in_reset;
+	u8		reserved[2];
 	u32		phy_type;
 	enum sas_linkrate	minimum_linkrate;
 	enum sas_linkrate	maximum_linkrate;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index f6c4eb6..9adf18c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1529,12 +1529,39 @@ static int hisi_sas_clear_aca(struct domain_device *device, u8 *lun)
 
 static int hisi_sas_debug_I_T_nexus_reset(struct domain_device *device)
 {
-	struct sas_phy *phy = sas_get_local_phy(device);
+	struct sas_phy *local_phy = sas_get_local_phy(device);
 	int rc, reset_type = (device->dev_type == SAS_SATA_DEV ||
 			(device->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
-	rc = sas_phy_reset(phy, reset_type);
-	sas_put_local_phy(phy);
-	msleep(2000);
+	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+	struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[local_phy->number];
+	struct hisi_sas_phy *phy = container_of(sas_phy,
+			struct hisi_sas_phy, sas_phy);
+	DECLARE_COMPLETION_ONSTACK(phyreset);
+
+	if (scsi_is_sas_phy_local(local_phy)) {
+		phy->in_reset = 1;
+		phy->reset_completion = &phyreset;
+	}
+
+	rc = sas_phy_reset(local_phy, reset_type);
+	sas_put_local_phy(local_phy);
+
+	if (scsi_is_sas_phy_local(local_phy)) {
+		int ret = wait_for_completion_timeout(&phyreset, 2 * HZ);
+		unsigned long flags;
+
+		spin_lock_irqsave(&phy->lock, flags);
+		phy->reset_completion = NULL;
+		phy->in_reset = 0;
+		spin_unlock_irqrestore(&phy->lock, flags);
+
+		/* report PHY down if timed out */
+		if (!ret)
+			hisi_sas_phy_down(hisi_hba, sas_phy->id, 0);
+	} else
+		msleep(2000);
+
 	return rc;
 }
 
@@ -1883,6 +1910,7 @@ void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
 	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
 	struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+	struct device *dev = hisi_hba->dev;
 
 	if (rdy) {
 		/* Phy down but ready */
@@ -1891,6 +1919,10 @@ void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
 	} else {
 		struct hisi_sas_port *port  = phy->port;
 
+		if (phy->in_reset) {
+			dev_info(dev, "ignore flutter phy%d down\n", phy_no);
+			return;
+		}
 		/* Phy down and not ready */
 		sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
 		sas_phy_disconnected(sas_phy);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 05609ac..89ab18c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1373,6 +1373,7 @@ static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
 	u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
 	struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
 	irqreturn_t res = IRQ_HANDLED;
+	unsigned long flags;
 
 	irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
 	if (!(irq_value & CHL_INT2_SL_PHY_ENA_MSK)) {
@@ -1426,6 +1427,13 @@ static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
 			SAS_PROTOCOL_SMP;
 	hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
 
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->reset_completion) {
+		phy->in_reset = 0;
+		complete(phy->reset_completion);
+	}
+	spin_unlock_irqrestore(&phy->lock, flags);
+
 end:
 	hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
 			     CHL_INT2_SL_PHY_ENA_MSK);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 369ef7e..213c530 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2661,6 +2661,7 @@ static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
 	struct device *dev = hisi_hba->dev;
 	u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
 	struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
+	unsigned long flags;
 
 	hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1);
 
@@ -2713,6 +2714,12 @@ static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
 			set_link_timer_quirk(hisi_hba);
 	}
 	hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->reset_completion) {
+		phy->in_reset = 0;
+		complete(phy->reset_completion);
+	}
+	spin_unlock_irqrestore(&phy->lock, flags);
 
 end:
 	hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
@@ -3201,6 +3208,7 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
 	u32 ent_tmp, ent_msk, ent_int, port_id, link_rate, hard_phy_linkrate;
 	irqreturn_t res = IRQ_HANDLED;
 	u8 attached_sas_addr[SAS_ADDR_SIZE] = {0};
+	unsigned long flags;
 	int phy_no, offset;
 
 	phy_no = sas_phy->id;
@@ -3275,6 +3283,12 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
 	phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
 	hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
 
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->reset_completion) {
+		phy->in_reset = 0;
+		complete(phy->reset_completion);
+	}
+	spin_unlock_irqrestore(&phy->lock, flags);
 end:
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC1 + offset, ent_tmp);
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1 + offset, ent_msk);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 8c996aa..9f1e2d0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1143,6 +1143,7 @@ static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
 	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
 	struct device *dev = hisi_hba->dev;
+	unsigned long flags;
 
 	hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1);
 
@@ -1211,6 +1212,12 @@ static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
 	phy->phy_attached = 1;
 	hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
 	res = IRQ_HANDLED;
+	spin_lock_irqsave(&phy->lock, flags);
+	if (phy->reset_completion) {
+		phy->in_reset = 0;
+		complete(phy->reset_completion);
+	}
+	spin_unlock_irqrestore(&phy->lock, flags);
 end:
 	hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
 			     CHL_INT0_SL_PHY_ENABLE_MSK);
-- 
1.9.1

Re: [PATCH 00/13] hisi_sas: Misc improvements, bugfixes, etc.

[Martin K. Petersen]

John,

> This patchset introduces some misc improvements, bugfixes,
> and SoC workarounds for the driver, including:

> - workaround for v2 hw reset with SATA disks attached
> - LED SGPIO support for v3 hw
> - Fix for error path in task_prep function
> - change slot and disk allocation method to avoid
>   unknown SoC bugs
> - fix potential problem of removing the driver when
>   a disk is mounted
> - other more minor stuff

Applied to 4.18/scsi-queue. Thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH 00/13] hisi_sas: Misc improvements, bugfixes, etc.

[Martin K. Petersen]

John,

> This patchset introduces some misc improvements, bugfixes,
> and SoC workarounds for the driver, including:

> - workaround for v2 hw reset with SATA disks attached
> - LED SGPIO support for v3 hw
> - Fix for error path in task_prep function
> - change slot and disk allocation method to avoid
>   unknown SoC bugs
> - fix potential problem of removing the driver when
>   a disk is mounted
> - other more minor stuff

Applied to 4.18/scsi-queue. Thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering