* [alsa-devel] [PATCH v2 1/3] ASoC: add control components management
@ 2019-11-20 7:28 Jaroslav Kysela
2019-11-20 7:28 ` [alsa-devel] [PATCH v2 2/3] ASoC: Intel - use control components to describe card config Jaroslav Kysela
2019-11-20 7:28 ` [alsa-devel] [PATCH v2 3/3] ASoC: Intel - do not describe I/O configuration in the long card name Jaroslav Kysela
0 siblings, 2 replies; 6+ messages in thread
From: Jaroslav Kysela @ 2019-11-20 7:28 UTC (permalink / raw)
To: ALSA development; +Cc: Takashi Iwai, Mark Brown
This ASCII string can carry additional information about
soundcard components or configuration. Add the possibility
to set this string via the ASoC card.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
---
include/sound/soc.h | 1 +
sound/soc/soc-core.c | 13 +++++++++++++
2 files changed, 14 insertions(+)
diff --git a/include/sound/soc.h b/include/sound/soc.h
index e0855dc08d30..bd943b5d7d45 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -982,6 +982,7 @@ struct snd_soc_card {
const char *name;
const char *long_name;
const char *driver_name;
+ const char *components;
char dmi_longname[80];
char topology_shortname[32];
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 55014e7ae0d8..b4683d4588ee 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2121,6 +2121,19 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card)
soc_setup_card_name(card->snd_card->driver,
card->driver_name, card->name, 1);
+ if (card->components) {
+ /* the current implementation of snd_component_add() accepts */
+ /* multiple components in the string separated by space, */
+ /* but the string collision (identical string) check might */
+ /* not work correctly */
+ ret = snd_component_add(card->snd_card, card->components);
+ if (ret < 0) {
+ dev_err(card->dev, "ASoC: %s snd_component_add() failed: %d\n",
+ card->name, ret);
+ goto probe_end;
+ }
+ }
+
if (card->late_probe) {
ret = card->late_probe(card);
if (ret < 0) {
--
2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [alsa-devel] [PATCH v2 2/3] ASoC: Intel - use control components to describe card config
2019-11-20 7:28 [alsa-devel] [PATCH v2 1/3] ASoC: add control components management Jaroslav Kysela
@ 2019-11-20 7:28 ` Jaroslav Kysela
2019-11-20 9:44 ` Jaroslav Kysela
2019-11-20 7:28 ` [alsa-devel] [PATCH v2 3/3] ASoC: Intel - do not describe I/O configuration in the long card name Jaroslav Kysela
1 sibling, 1 reply; 6+ messages in thread
From: Jaroslav Kysela @ 2019-11-20 7:28 UTC (permalink / raw)
To: ALSA development; +Cc: Takashi Iwai, Mark Brown, Pierre-Louis Bossart
Use the control interface (field 'components' in the info structure)
to pass the I/O configuration details. The goal is to replace
the card long name with this.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
---
sound/soc/intel/boards/bytcht_es8316.c | 10 +++++++++-
sound/soc/intel/boards/bytcr_rt5640.c | 6 ++++++
sound/soc/intel/boards/bytcr_rt5651.c | 18 +++++++++++-------
3 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
index 46612331f5ea..4090550f0fe1 100644
--- a/sound/soc/intel/boards/bytcht_es8316.c
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -361,6 +361,7 @@ static struct snd_soc_dai_link byt_cht_es8316_dais[] = {
/* SoC card */
static char codec_name[SND_ACPI_I2C_ID_LEN];
static char long_name[50]; /* = "bytcht-es8316-*-spk-*-mic" */
+static char components_string[32]; /* = "cfg-spk:* cfg-mic:* */
static int byt_cht_es8316_suspend(struct snd_soc_card *card)
{
@@ -572,17 +573,24 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
}
}
- /* register the soc card */
+ snprintf(components_string, sizeof(components_string),
+ "cfg-spk:%s cfg-mic:%s",
+ (quirk & BYT_CHT_ES8316_MONO_SPEAKER) ? "1" : "2",
+ mic_name[BYT_CHT_ES8316_MAP(quirk)]);
+ byt_cht_es8316_card.components = components_string;
snprintf(long_name, sizeof(long_name), "bytcht-es8316-%s-spk-%s-mic",
(quirk & BYT_CHT_ES8316_MONO_SPEAKER) ? "mono" : "stereo",
mic_name[BYT_CHT_ES8316_MAP(quirk)]);
byt_cht_es8316_card.long_name = long_name;
+
+ /* register the soc card */
snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv);
ret = devm_snd_soc_register_card(dev, &byt_cht_es8316_card);
if (ret) {
gpiod_put(priv->speaker_en_gpio);
dev_err(dev, "snd_soc_register_card failed: %d\n", ret);
+
return ret;
}
platform_set_drvdata(pdev, &byt_cht_es8316_card);
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 9c1aa4ec9cba..0170d31e691a 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -1081,6 +1081,7 @@ static char byt_rt5640_codec_name[SND_ACPI_I2C_ID_LEN];
static char byt_rt5640_codec_aif_name[12]; /* = "rt5640-aif[1|2]" */
static char byt_rt5640_cpu_dai_name[10]; /* = "ssp[0|2]-port" */
static char byt_rt5640_long_name[40]; /* = "bytcr-rt5640-*-spk-*-mic" */
+static char byt_rt5640_components[32]; /* = "cfg-spk:* cfg-mic:*" */
static int byt_rt5640_suspend(struct snd_soc_card *card)
{
@@ -1303,6 +1304,11 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
}
}
+ snprintf(byt_rt5640_components, sizeof(byt_rt5640_components),
+ "cfg-spk:%s cfg-mic:%s",
+ (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? "1" : "2",
+ map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
+ byt_rt5640_card.components = byt_rt5640_components;
snprintf(byt_rt5640_long_name, sizeof(byt_rt5640_long_name),
"bytcr-rt5640-%s-spk-%s-mic",
(byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ?
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 4606f6f582d6..80a5674ddb1b 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -798,6 +798,7 @@ static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN];
static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */
static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */
static char byt_rt5651_long_name[50]; /* = "bytcr-rt5651-*-spk-*-mic[-swapped-hp]" */
+static char byt_rt5651_components[50]; /* = "cfg-spk:* cfg-mic:*" */
static int byt_rt5651_suspend(struct snd_soc_card *card)
{
@@ -876,7 +877,6 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
const char *platform_name;
struct acpi_device *adev;
struct device *codec_dev;
- const char *hp_swapped;
bool is_bytcr = false;
int ret_val = 0;
int dai_index = 0;
@@ -1080,16 +1080,20 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
}
}
- if (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED)
- hp_swapped = "-hp-swapped";
- else
- hp_swapped = "";
-
+ snprintf(byt_rt5651_components, sizeof(byt_rt5651_components),
+ "cfg-spk:%s cfg-mic:%s%s",
+ (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ? "1" : "2",
+ mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)],
+ (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) ?
+ " cfg-hp:lrswap" : "");
+ byt_rt5651_card.components = byt_rt5651_components;
snprintf(byt_rt5651_long_name, sizeof(byt_rt5651_long_name),
"bytcr-rt5651-%s-spk-%s-mic%s",
(byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ?
"mono" : "stereo",
- mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], hp_swapped);
+ mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)],
+ (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) ?
+ "-hp-swapped" : "");
byt_rt5651_card.long_name = byt_rt5651_long_name;
/* override plaform name, if required */
--
2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [alsa-devel] [PATCH v2 3/3] ASoC: Intel - do not describe I/O configuration in the long card name
2019-11-20 7:28 [alsa-devel] [PATCH v2 1/3] ASoC: add control components management Jaroslav Kysela
2019-11-20 7:28 ` [alsa-devel] [PATCH v2 2/3] ASoC: Intel - use control components to describe card config Jaroslav Kysela
@ 2019-11-20 7:28 ` Jaroslav Kysela
2019-11-20 16:08 ` Pierre-Louis Bossart
1 sibling, 1 reply; 6+ messages in thread
From: Jaroslav Kysela @ 2019-11-20 7:28 UTC (permalink / raw)
To: ALSA development; +Cc: Takashi Iwai, Mark Brown, Pierre-Louis Bossart
The long card name might be used in GUI. This information should be hidden.
Add CONFIG_SND_SOC_INTEL_USER_FRIENDLY_NAMES configuration option.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
---
sound/soc/intel/boards/Kconfig | 9 +++++++++
sound/soc/intel/boards/bytcht_es8316.c | 4 ++++
sound/soc/intel/boards/bytcr_rt5640.c | 4 ++++
sound/soc/intel/boards/bytcr_rt5651.c | 4 ++++
4 files changed, 21 insertions(+)
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 2702aefee775..51a3929cf3ac 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -13,6 +13,15 @@ menuconfig SND_SOC_INTEL_MACH
if SND_SOC_INTEL_MACH
+config SND_SOC_INTEL_USER_FRIENDLY_NAMES
+ bool "Use more user friendly long card names"
+ help
+ Some drivers might pass the I/O configuration through the
+ soundcard's driver name in the control user space API. It may
+ be used in GUI. If you do not like this and the user space
+ does not depend on this (like UCM - Use Case Manager),
+ then select "Y".
+
if SND_SOC_INTEL_HASWELL
config SND_SOC_INTEL_HASWELL_MACH
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
index 4090550f0fe1..8d4aa206766c 100644
--- a/sound/soc/intel/boards/bytcht_es8316.c
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -360,7 +360,9 @@ static struct snd_soc_dai_link byt_cht_es8316_dais[] = {
/* SoC card */
static char codec_name[SND_ACPI_I2C_ID_LEN];
+#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_NAMES)
static char long_name[50]; /* = "bytcht-es8316-*-spk-*-mic" */
+#endif
static char components_string[32]; /* = "cfg-spk:* cfg-mic:* */
static int byt_cht_es8316_suspend(struct snd_soc_card *card)
@@ -578,10 +580,12 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
(quirk & BYT_CHT_ES8316_MONO_SPEAKER) ? "1" : "2",
mic_name[BYT_CHT_ES8316_MAP(quirk)]);
byt_cht_es8316_card.components = components_string;
+#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_NAMES)
snprintf(long_name, sizeof(long_name), "bytcht-es8316-%s-spk-%s-mic",
(quirk & BYT_CHT_ES8316_MONO_SPEAKER) ? "mono" : "stereo",
mic_name[BYT_CHT_ES8316_MAP(quirk)]);
byt_cht_es8316_card.long_name = long_name;
+#endif
/* register the soc card */
snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv);
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 0170d31e691a..5959ebb4e4eb 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -1080,7 +1080,9 @@ static struct snd_soc_dai_link byt_rt5640_dais[] = {
static char byt_rt5640_codec_name[SND_ACPI_I2C_ID_LEN];
static char byt_rt5640_codec_aif_name[12]; /* = "rt5640-aif[1|2]" */
static char byt_rt5640_cpu_dai_name[10]; /* = "ssp[0|2]-port" */
+#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_NAMES)
static char byt_rt5640_long_name[40]; /* = "bytcr-rt5640-*-spk-*-mic" */
+#endif
static char byt_rt5640_components[32]; /* = "cfg-spk:* cfg-mic:*" */
static int byt_rt5640_suspend(struct snd_soc_card *card)
@@ -1309,12 +1311,14 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
(byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? "1" : "2",
map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
byt_rt5640_card.components = byt_rt5640_components;
+#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_NAMES)
snprintf(byt_rt5640_long_name, sizeof(byt_rt5640_long_name),
"bytcr-rt5640-%s-spk-%s-mic",
(byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ?
"mono" : "stereo",
map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]);
byt_rt5640_card.long_name = byt_rt5640_long_name;
+#endif
/* override plaform name, if required */
platform_name = mach->mach_params.platform;
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 80a5674ddb1b..9151246efead 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -797,7 +797,9 @@ static struct snd_soc_dai_link byt_rt5651_dais[] = {
static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN];
static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */
static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */
+#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_NAMES)
static char byt_rt5651_long_name[50]; /* = "bytcr-rt5651-*-spk-*-mic[-swapped-hp]" */
+#endif
static char byt_rt5651_components[50]; /* = "cfg-spk:* cfg-mic:*" */
static int byt_rt5651_suspend(struct snd_soc_card *card)
@@ -1087,6 +1089,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
(byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) ?
" cfg-hp:lrswap" : "");
byt_rt5651_card.components = byt_rt5651_components;
+#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_NAMES)
snprintf(byt_rt5651_long_name, sizeof(byt_rt5651_long_name),
"bytcr-rt5651-%s-spk-%s-mic%s",
(byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ?
@@ -1095,6 +1098,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
(byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) ?
"-hp-swapped" : "");
byt_rt5651_card.long_name = byt_rt5651_long_name;
+#endif
/* override plaform name, if required */
platform_name = mach->mach_params.platform;
--
2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [alsa-devel] [PATCH v2 2/3] ASoC: Intel - use control components to describe card config
2019-11-20 7:28 ` [alsa-devel] [PATCH v2 2/3] ASoC: Intel - use control components to describe card config Jaroslav Kysela
@ 2019-11-20 9:44 ` Jaroslav Kysela
0 siblings, 0 replies; 6+ messages in thread
From: Jaroslav Kysela @ 2019-11-20 9:44 UTC (permalink / raw)
To: ALSA development; +Cc: Takashi Iwai, Mark Brown, Pierre-Louis Bossart
Dne 20. 11. 19 v 8:28 Jaroslav Kysela napsal(a):
> diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
...
> + /* register the soc card */
> snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv);
>
> ret = devm_snd_soc_register_card(dev, &byt_cht_es8316_card);
> if (ret) {
> gpiod_put(priv->speaker_en_gpio);
> dev_err(dev, "snd_soc_register_card failed: %d\n", ret);
> +
> return ret;
> }
> platform_set_drvdata(pdev, &byt_cht_es8316_card);
Please, remove this extra new line when you apply the patch.
Thanks,
Jaroslav
--
Jaroslav Kysela <perex@perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [alsa-devel] [PATCH v2 3/3] ASoC: Intel - do not describe I/O configuration in the long card name
2019-11-20 7:28 ` [alsa-devel] [PATCH v2 3/3] ASoC: Intel - do not describe I/O configuration in the long card name Jaroslav Kysela
@ 2019-11-20 16:08 ` Pierre-Louis Bossart
2019-11-20 17:55 ` Jaroslav Kysela
0 siblings, 1 reply; 6+ messages in thread
From: Pierre-Louis Bossart @ 2019-11-20 16:08 UTC (permalink / raw)
To: Jaroslav Kysela, ALSA development; +Cc: Takashi Iwai, Mark Brown
> +config SND_SOC_INTEL_USER_FRIENDLY_NAMES
LONGNAMES?
> + bool "Use more user friendly long card names"
> + help
> + Some drivers might pass the I/O configuration through the
> + soundcard's driver name in the control user space API. It may
> + be used in GUI. If you do not like this and the user space
> + does not depend on this (like UCM - Use Case Manager),
> + then select "Y".
Sorry for being picky here, but I find the wording confusing with two
negatives resulting in a Y.
maybe
Some drivers report the I/O configuration to userspace through the
soundcard's long card name in the control user space AP. An unfortunate
side effect is that this long name may also be used by the GUI,
confusing users with information they don't need.
This option prevents the long name from being modified, and the I/O
configuration will be provided through a different component interface.
Select Y if userspace like UCM (Use Case Manager) uses the component
interface.
If unsure select N.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [alsa-devel] [PATCH v2 3/3] ASoC: Intel - do not describe I/O configuration in the long card name
2019-11-20 16:08 ` Pierre-Louis Bossart
@ 2019-11-20 17:55 ` Jaroslav Kysela
0 siblings, 0 replies; 6+ messages in thread
From: Jaroslav Kysela @ 2019-11-20 17:55 UTC (permalink / raw)
To: Pierre-Louis Bossart, ALSA development; +Cc: Takashi Iwai, Mark Brown
Dne 20. 11. 19 v 17:08 Pierre-Louis Bossart napsal(a):
>
>> +config SND_SOC_INTEL_USER_FRIENDLY_NAMES
>
> LONGNAMES?
>
>> + bool "Use more user friendly long card names"
>> + help
>> + Some drivers might pass the I/O configuration through the
>> + soundcard's driver name in the control user space API. It may
>> + be used in GUI. If you do not like this and the user space
>> + does not depend on this (like UCM - Use Case Manager),
>> + then select "Y".
>
> Sorry for being picky here, but I find the wording confusing with two
> negatives resulting in a Y.
>
> maybe
>
> Some drivers report the I/O configuration to userspace through the
> soundcard's long card name in the control user space AP. An unfortunate
> side effect is that this long name may also be used by the GUI,
> confusing users with information they don't need.
> This option prevents the long name from being modified, and the I/O
> configuration will be provided through a different component interface.
> Select Y if userspace like UCM (Use Case Manager) uses the component
> interface.
> If unsure select N.
Thanks, I used your text. The v3 patches are sent without the first one which
is already merged to the Mark's tree.
Thanks for review,
Jaroslav
--
Jaroslav Kysela <perex@perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-11-20 17:58 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-20 7:28 [alsa-devel] [PATCH v2 1/3] ASoC: add control components management Jaroslav Kysela
2019-11-20 7:28 ` [alsa-devel] [PATCH v2 2/3] ASoC: Intel - use control components to describe card config Jaroslav Kysela
2019-11-20 9:44 ` Jaroslav Kysela
2019-11-20 7:28 ` [alsa-devel] [PATCH v2 3/3] ASoC: Intel - do not describe I/O configuration in the long card name Jaroslav Kysela
2019-11-20 16:08 ` Pierre-Louis Bossart
2019-11-20 17:55 ` Jaroslav Kysela
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).