alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
* Re: [PATCH v3 2/8] PCI: add pci_status_get_and_clear_errors
       [not found] <45054c7d-cc48-2be0-11fa-4c3ffce8fdd7@gmail.com>
@ 2020-02-25 20:57 ` Bjorn Helgaas
  0 siblings, 0 replies; only message in thread
From: Bjorn Helgaas @ 2020-02-25 20:57 UTC (permalink / raw)
  To: Heiner Kallweit
  Cc: alsa-devel, Realtek linux nic maintainers, linux-pci,
	Clemens Ladisch, Takashi Iwai, Stephen Hemminger, netdev,
	David Miller, Linux Kernel Mailing List, Mirko Lindner

On Tue, Feb 25, 2020 at 03:04:23PM +0100, Heiner Kallweit wrote:
> Few drivers use the following code sequence:

This reads like "Not very many drivers".  I think "Several drivers"
would capture the sense of this better.

> 1. Read PCI_STATUS
> 2. Mask out non-error bits
> 3. Action based on error bits set
> 4. Write back set error bits to clear them
> 
> As this is a repeated pattern, add a helper to the PCI core.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
>  drivers/pci/pci.c   | 23 +++++++++++++++++++++++
>  include/linux/pci.h |  1 +
>  2 files changed, 24 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index d828ca835..c16b0ba2a 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -173,6 +173,29 @@ unsigned char pci_bus_max_busnr(struct pci_bus *bus)
>  }
>  EXPORT_SYMBOL_GPL(pci_bus_max_busnr);
>  
> +/**
> + * pci_status_get_and_clear_errors - return and clear error bits in PCI_STATUS
> + * @pdev: the PCI device
> + *
> + * Returns error bits set in PCI_STATUS and clears them.
> + */
> +int pci_status_get_and_clear_errors(struct pci_dev *pdev)
> +{
> +	u16 status;
> +	int ret;
> +
> +	ret = pci_read_config_word(pdev, PCI_STATUS, &status);
> +	if (ret != PCIBIOS_SUCCESSFUL)
> +		return -EIO;
> +
> +	status &= PCI_STATUS_ERROR_BITS;
> +	if (status)
> +		pci_write_config_word(pdev, PCI_STATUS, status);
> +
> +	return status;
> +}
> +EXPORT_SYMBOL_GPL(pci_status_get_and_clear_errors);
> +
>  #ifdef CONFIG_HAS_IOMEM
>  void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
>  {
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 3840a541a..7a75aae04 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1203,6 +1203,7 @@ int pci_select_bars(struct pci_dev *dev, unsigned long flags);
>  bool pci_device_is_present(struct pci_dev *pdev);
>  void pci_ignore_hotplug(struct pci_dev *dev);
>  struct pci_dev *pci_real_dma_dev(struct pci_dev *dev);
> +int pci_status_get_and_clear_errors(struct pci_dev *pdev);
>  
>  int __printf(6, 7) pci_request_irq(struct pci_dev *dev, unsigned int nr,
>  		irq_handler_t handler, irq_handler_t thread_fn, void *dev_id,
> -- 
> 2.25.1
> 
> 
> 
> 

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2020-02-25 20:58 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <45054c7d-cc48-2be0-11fa-4c3ffce8fdd7@gmail.com>
2020-02-25 20:57 ` [PATCH v3 2/8] PCI: add pci_status_get_and_clear_errors Bjorn Helgaas

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).