* crackling microphone
[not found] <1589003959919719934-webhooks-bot@alsa-project.org>
@ 2020-05-09 5:59 ` GitHub issues - reopened
0 siblings, 0 replies; 4+ messages in thread
From: GitHub issues - reopened @ 2020-05-09 5:59 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-plugins issue #10 was reopened from riddicc:
Hi!
When I send a 800Hz sine wave with rate 12345 to pcm.outmic and
when I arecord from pcm.micend at rate 8000 with 1 channel ([/etc/asound.conf](https://github.com/alsa-project/alsa-plugins/files/4597703/etc-asound-conf.txt)),
then I get a lot of tiny little gaps (see attachment) and a lot of messages like "overrun!!! (at least 0.014 ms long)" (the "ms" vary from 0.008 to 0.043; and arecord continues to record) and sometimes even this error: "arecord: xrun:1672: read/write error, state = RUNNING" (it causes arecord to terminate).
1. > speaker-test -D outmic -t sine -f 800 -c2 -r 12345
2. > arecord -D micend -r 8000 -c 1 -f S16_LE /tmp/bla.wav
twinkle makes even bigger gaps, when I let it use pcm.micend as microphone...
But with hw:Generic,0,0 as mic device twinkle works fine...
https://github.com/LubosD/twinkle/issues/207
"samplerate_best" and "samplerate_order" seems to make it worse...
How can I fix that?
Thx.
Bye.
Issue URL : https://github.com/alsa-project/alsa-plugins/issues/10
Repository URL: https://github.com/alsa-project/alsa-plugins
^ permalink raw reply [flat|nested] 4+ messages in thread
* crackling microphone
[not found] <1589023625704346895-webhooks-bot@alsa-project.org>
@ 2020-05-09 11:27 ` GitHub issues - reopened
0 siblings, 0 replies; 4+ messages in thread
From: GitHub issues - reopened @ 2020-05-09 11:27 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-plugins issue #10 was reopened from riddicc:
Hi!
When I send a 800Hz sine wave with rate 12345 to pcm.outmic and
when I arecord from pcm.micend at rate 8000 with 1 channel ([/etc/asound.conf](https://github.com/alsa-project/alsa-plugins/files/4597703/etc-asound-conf.txt)),
then I get a lot of tiny little gaps (see attachment) and a lot of messages like "overrun!!! (at least 0.014 ms long)" (the "ms" vary from 0.008 to 0.043; and arecord continues to record) and sometimes even this error: "arecord: xrun:1672: read/write error, state = RUNNING" (it causes arecord to terminate).
1. > speaker-test -D outmic -t sine -f 800 -c2 -r 12345
2. > arecord -D micend -r 8000 -c 1 -f S16_LE /tmp/bla.wav
twinkle makes even bigger gaps, when I let it use pcm.micend as microphone...
But with hw:Generic,0,0 as mic device twinkle works fine...
https://github.com/LubosD/twinkle/issues/207
"samplerate_best" and "samplerate_order" seems to make it worse...
How can I fix that?
Thx.
Bye.
Issue URL : https://github.com/alsa-project/alsa-plugins/issues/10
Repository URL: https://github.com/alsa-project/alsa-plugins
^ permalink raw reply [flat|nested] 4+ messages in thread
* crackling microphone
[not found] <1588925673549724102-webhooks-bot@alsa-project.org>
@ 2020-05-08 8:14 ` GitHub issues - edited
0 siblings, 0 replies; 4+ messages in thread
From: GitHub issues - edited @ 2020-05-08 8:14 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-plugins issue #10 was edited from riddicc:
Hi!
When I send a 800Hz sine wave with rate 12345 to pcm.outmic and
when I arecord from pcm.micend at rate 8000 with 1 channel ([/etc/asound.conf](https://github.com/alsa-project/alsa-plugins/files/4597703/etc-asound-conf.txt)),
then I get a lot of tiny little gaps (see attachment) and a lot of messages like "overrun!!! (at least 0.014 ms long)" (the "ms" vary from 0.008 to 0.043; and arecord continues to record) and sometimes even this error: "arecord: xrun:1672: read/write error, state = RUNNING" (it causes arecord to terminate).
1. > speaker-test -D outmic -t sine -f 800 -c2 -r 12345
2. > arecord -D micend -r 8000 -c 1 -f S16_LE /tmp/bla.wav
twinkle makes even bigger gaps, when I let it use pcm.micend as microphone...
But with hw:Generic,0,0 as mic device twinkle works fine...
https://github.com/LubosD/twinkle/issues/207
"samplerate_best" and "samplerate_order" seems to make it worse...
How can I fix that?
Thx.
Bye.
Issue URL : https://github.com/alsa-project/alsa-plugins/issues/10
Repository URL: https://github.com/alsa-project/alsa-plugins
^ permalink raw reply [flat|nested] 4+ messages in thread
* crackling microphone
[not found] <1588925461132916927-webhooks-bot@alsa-project.org>
@ 2020-05-08 8:11 ` GitHub issues - opened
0 siblings, 0 replies; 4+ messages in thread
From: GitHub issues - opened @ 2020-05-08 8:11 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-plugins issue #10 was opened from riddicc:
Hi!
When I send a 800Hz sine wave with rate 12345 to pcm.outmic and
when I arecord from pcm.micend at rate 8000 with 1 channel ([/etc/asound.conf](https://github.com/alsa-project/alsa-plugins/files/4597703/etc-asound-conf.txt)),
then I get a lot of tiny little gaps (see attachment) and a lot of messages like "overrun!!! (at least 0.014 ms long)" (the "ms" vary from 0.008 to 0.043; and arecord continues to record) and sometimes even this error: "arecord: xrun:1672: read/write error, state = RUNNING" (it causes arecord to terminate).
1. > speaker-test -D outmic -t sine -f 800 -c2 -r 12345
2. > arecord -D micend -r 8000 -c 1 -f S16_LE /tmp/bla.wav
twinkle makes even bigger gaps, when I let it use pcm.micend as microphone...
But with hw:Generic,0,0 as mic device twinkle works fine...
https://github.com/LubosD/twinkle/issues/207
"samplerate_best" and "samplerate_order" sees to make it worse...
How can I fix that?
Thx.
Bye.
Issue URL : https://github.com/alsa-project/alsa-plugins/issues/10
Repository URL: https://github.com/alsa-project/alsa-plugins
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-05-09 11:28 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1589003959919719934-webhooks-bot@alsa-project.org>
2020-05-09 5:59 ` crackling microphone GitHub issues - reopened
[not found] <1589023625704346895-webhooks-bot@alsa-project.org>
2020-05-09 11:27 ` GitHub issues - reopened
[not found] <1588925673549724102-webhooks-bot@alsa-project.org>
2020-05-08 8:14 ` GitHub issues - edited
[not found] <1588925461132916927-webhooks-bot@alsa-project.org>
2020-05-08 8:11 ` GitHub issues - opened
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).