Alsa-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: alsa-devel@alsa-project.org
Cc: Matwey Kornilov <matwey.kornilov@gmail.com>,
	Dylan Robinson <dylan_robinson@motu.com>,
	Keith Milner <kamilner@superlative.org>
Subject: [PATCH 06/41] ALSA: usb-audio: Set and clear sync EP link properly
Date: Mon, 23 Nov 2020 09:53:12 +0100
Message-ID: <20201123085347.19667-7-tiwai@suse.de> (raw)
In-Reply-To: <20201123085347.19667-1-tiwai@suse.de>

The sync EP setup isn't cleared at stopping the stream but expected to
be cleared at the next stream start.  This may leave the sync link
setup stale and can spoof wrongly when full duplex streams were
running in the implicit fb sync.  Let's initialize them properly at
start and end of the stream.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/pcm.c | 30 +++++++++++-------------------
 1 file changed, 11 insertions(+), 19 deletions(-)

diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 2b11c2c837bf..8800ec627a73 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -238,6 +238,7 @@ static int start_endpoints(struct snd_usb_substream *subs)
 		err = snd_usb_endpoint_start(ep);
 		if (err < 0) {
 			clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags);
+			ep->sync_slave = NULL;
 			return err;
 		}
 	}
@@ -253,8 +254,10 @@ static void sync_pending_stops(struct snd_usb_substream *subs)
 
 static void stop_endpoints(struct snd_usb_substream *subs)
 {
-	if (test_and_clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags))
+	if (test_and_clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags)) {
 		snd_usb_endpoint_stop(subs->sync_endpoint);
+		subs->sync_endpoint->sync_slave = NULL;
+	}
 
 	if (test_and_clear_bit(SUBSTREAM_FLAG_DATA_EP_STARTED, &subs->flags))
 		snd_usb_endpoint_stop(subs->data_endpoint);
@@ -471,26 +474,10 @@ static int set_sync_endpoint(struct snd_usb_substream *subs,
 	bool implicit_fb;
 	int err;
 
-	/* we need a sync pipe in async OUT or adaptive IN mode */
-	/* check the number of EP, since some devices have broken
-	 * descriptors which fool us.  if it has only one EP,
-	 * assume it as adaptive-out or sync-in.
-	 */
 	attr = fmt->ep_attr & USB_ENDPOINT_SYNCTYPE;
 
-	if ((is_playback && (attr != USB_ENDPOINT_SYNC_ASYNC)) ||
-		(!is_playback && (attr != USB_ENDPOINT_SYNC_ADAPTIVE))) {
-
-		/*
-		 * In these modes the notion of sync_endpoint is irrelevant.
-		 * Reset pointers to avoid using stale data from previously
-		 * used settings, e.g. when configuration and endpoints were
-		 * changed
-		 */
-
-		subs->sync_endpoint = NULL;
-		subs->data_endpoint->sync_master = NULL;
-	}
+	subs->sync_endpoint = NULL;
+	subs->data_endpoint->sync_master = NULL;
 
 	err = set_sync_ep_implicit_fb_quirk(subs, dev, altsd, attr);
 	if (err < 0)
@@ -939,6 +926,11 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream)
 		sync_pending_stops(subs);
 		snd_usb_endpoint_deactivate(subs->sync_endpoint);
 		snd_usb_endpoint_deactivate(subs->data_endpoint);
+		if (subs->data_endpoint) {
+			subs->data_endpoint->sync_master = NULL;
+			subs->data_endpoint = NULL;
+		}
+		subs->sync_endpoint = NULL;
 		snd_usb_unlock_shutdown(subs->stream->chip);
 	}
 
-- 
2.16.4


  parent reply index

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-23  8:53 [PATCH 00/41] USB audio refactoring for better implicit feedback support Takashi Iwai
2020-11-23  8:53 ` [PATCH 01/41] ALSA: usb-audio: Handle discrete rates properly in hw constraints Takashi Iwai
2020-11-23  8:53 ` [PATCH 02/41] ALSA: usb-audio: Don't call usb_set_interface() at trigger callback Takashi Iwai
2020-11-23  8:53 ` [PATCH 03/41] ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3 Takashi Iwai
2020-11-23  8:53 ` [PATCH 04/41] ALSA: usb-audio: Check implicit feedback EP generically for UAC2 Takashi Iwai
2020-11-23  8:53 ` [PATCH 05/41] ALSA: usb-audio: Add snd_usb_get_endpoint() helper Takashi Iwai
2020-11-23  8:53 ` Takashi Iwai [this message]
2020-11-23  8:53 ` [PATCH 07/41] ALSA: usb-audio: Improve some debug prints Takashi Iwai
2020-11-23  8:53 ` [PATCH 08/41] ALSA: usb-audio: Track implicit fb sync endpoint in audioformat list Takashi Iwai
2020-11-23  8:53 ` [PATCH 09/41] ALSA: usb-audio: Move snd_usb_autoresume() call out of setup_hw_info() Takashi Iwai
2020-11-23  8:53 ` [PATCH 10/41] ALSA: usb-audio: Add hw constraint for implicit fb sync Takashi Iwai
2020-11-23  8:53 ` [PATCH 11/41] ALSA: usb-audio: Simplify hw_params rules Takashi Iwai
2020-11-23  8:53 ` [PATCH 12/41] ALSA: usb-audio: Drop debug.h Takashi Iwai
2020-11-23  8:53 ` [PATCH 13/41] ALSA: usb-audio: Avoid doubly initialization for implicit fb Takashi Iwai
2020-11-23  8:53 ` [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase Takashi Iwai
2021-01-03 17:09   ` [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase - Pioneer DJ DJM-250MK2 stopped working František Kučera
2021-01-03 17:19     ` Takashi Iwai
2021-01-03 18:15       ` František Kučera
2021-01-05  9:29         ` Takashi Iwai
2021-01-05 13:20           ` Takashi Iwai
2021-01-05 22:27             ` František Kučera
2021-01-06  9:03               ` Takashi Iwai
2021-01-06 19:01                 ` František Kučera
2021-01-07 13:30                   ` Takashi Iwai
2020-11-23  8:53 ` [PATCH 15/41] ALSA: usb-audio: Drop keep_interface flag again Takashi Iwai
2020-11-23  8:53 ` [PATCH 16/41] ALSA: usb-audio: Add snd_usb_get_host_interface() helper Takashi Iwai
2020-11-23  8:53 ` [PATCH 17/41] ALSA: usb-audio: Don't set altsetting before initializing sample rate Takashi Iwai
2020-11-23  8:53 ` [PATCH 18/41] ALSA: usb-audio: Pass snd_usb_audio object to quirk functions Takashi Iwai
2020-11-23  8:53 ` [PATCH 19/41] ALSA: usb-audio: Simplify snd_usb_init_sample_rate() arguments Takashi Iwai
2020-11-23  8:53 ` [PATCH 20/41] ALSA: usb-audio: Simplify snd_usb_init_pitch() arguments Takashi Iwai
2020-11-23  8:53 ` [PATCH 21/41] ALSA: usb-audio: Stop both endpoints properly at error Takashi Iwai
2020-11-23  8:53 ` [PATCH 22/41] ALSA: usb-audio: Set callbacks via snd_usb_endpoint_set_callback() Takashi Iwai
2020-11-23  8:53 ` [PATCH 23/41] ALSA: usb-audio: Always set up the parameters after resume Takashi Iwai
2020-11-23  8:53 ` [PATCH 24/41] ALSA: usb-audio: Fix EP matching for continuous rates Takashi Iwai
2020-11-23  8:53 ` [PATCH 25/41] ALSA: usb-audio: Refactor endpoint management Takashi Iwai
2020-11-23  8:53 ` [PATCH 26/41] ALSA: usb-audio: Fix possible stall of implicit fb packet ring-buffer Takashi Iwai
2020-11-23  8:53 ` [PATCH 27/41] ALSA: usb-audio: Constify audioformat pointer references Takashi Iwai
2020-11-23  8:53 ` [PATCH 28/41] ALSA: usb-audio: Use atomic_t for endpoint use_count Takashi Iwai
2020-11-23  8:53 ` [PATCH 29/41] ALSA: usb-audio: Refactoring endpoint URB deactivation Takashi Iwai
2020-11-23  8:53 ` [PATCH 30/41] ALSA: usb-audio: Drop unneeded snd_usb_substream fields Takashi Iwai
2020-11-23  8:53 ` [PATCH 31/41] ALSA: usb-audio: Unify the code for the next packet size calculation Takashi Iwai
2020-11-23  8:53 ` [PATCH 32/41] ALSA: usb-audio: Simplify rate_min/max and rates set up Takashi Iwai
2020-11-23  8:53 ` [PATCH 33/41] ALSA: usb-audio: Replace slave/master terms Takashi Iwai
2020-11-23  8:53 ` [PATCH 34/41] ALSA: usb-audio: Use unsigned char for iface and altsettings fields Takashi Iwai
2020-11-23  8:53 ` [PATCH 35/41] ALSA: usb-audio: Show sync endpoint information in proc outputs Takashi Iwai
2020-11-23  8:53 ` [PATCH 36/41] ALSA: usb-audio: Quirk for BOSS GT-001 Takashi Iwai
2020-11-23  8:53 ` [PATCH 37/41] ALSA: usb-audio: Factor out the implicit feedback quirk code Takashi Iwai
2020-11-23  8:53 ` [PATCH 38/41] ALSA: usb-audio: Add generic implicit fb parsing Takashi Iwai
2020-11-23  8:53 ` [PATCH 39/41] ALSA: usb-audio: Add implicit_fb module option Takashi Iwai
2020-11-23  9:46   ` Pavel Hofman
2020-11-23  8:53 ` [PATCH 40/41] ALSA: usb-audio: Fix quirks for other BOSS devices Takashi Iwai
2020-11-23  8:53 ` [PATCH 41/41] ALSA: usb-audio: Fix MOTU M-Series quirks Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201123085347.19667-7-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=dylan_robinson@motu.com \
    --cc=kamilner@superlative.org \
    --cc=matwey.kornilov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Alsa-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/alsa-devel/0 alsa-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 alsa-devel alsa-devel/ https://lore.kernel.org/alsa-devel \
		alsa-devel@alsa-project.org
	public-inbox-index alsa-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.alsa-project.alsa-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git