alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Sameer Pujar <spujar@nvidia.com>,
	Peter Geis <pgwipeout@gmail.com>,
	Nicolas Chauvet <kwizart@gmail.com>,
	Takashi Iwai <tiwai@suse.com>,
	Matt Merhar <mattmerhar@protonmail.com>,
	Jaroslav Kysela <perex@perex.cz>
Cc: linux-tegra@vger.kernel.org, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 6/6] ASoC: tegra: ahub: Reset hardware properly
Date: Wed, 20 Jan 2021 03:31:54 +0300	[thread overview]
Message-ID: <20210120003154.26749-7-digetx@gmail.com> (raw)
In-Reply-To: <20210120003154.26749-1-digetx@gmail.com>

Assert hardware resets before clocks are enabled and then de-assert them
after clocks are enabled. This brings hardware into a predictable state.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Dmitry Osipenko <digetx@gmail.com> # Nexus7 T30 audio works
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 sound/soc/tegra/tegra30_ahub.c | 36 ++++++++++++++++++++++++++++++----
 sound/soc/tegra/tegra30_ahub.h |  1 +
 2 files changed, 33 insertions(+), 4 deletions(-)

diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c
index 12ca8e3ca4f6..9ef05ca4f6c4 100644
--- a/sound/soc/tegra/tegra30_ahub.c
+++ b/sound/soc/tegra/tegra30_ahub.c
@@ -65,14 +65,39 @@ static int tegra30_ahub_runtime_resume(struct device *dev)
 {
 	int ret;
 
+	ret = reset_control_assert(ahub->reset);
+	if (ret)
+		return ret;
+
 	ret = clk_bulk_prepare_enable(ahub->nclocks, ahub->clocks);
 	if (ret)
 		return ret;
 
+	usleep_range(10, 100);
+
+	ret = reset_control_deassert(ahub->reset);
+	if (ret)
+		goto disable_clocks;
+
 	regcache_cache_only(ahub->regmap_apbif, false);
 	regcache_cache_only(ahub->regmap_ahub, false);
+	regcache_mark_dirty(ahub->regmap_apbif);
+	regcache_mark_dirty(ahub->regmap_ahub);
+
+	ret = regcache_sync(ahub->regmap_apbif);
+	if (ret)
+		goto disable_clocks;
+
+	ret = regcache_sync(ahub->regmap_ahub);
+	if (ret)
+		goto disable_clocks;
 
 	return 0;
+
+disable_clocks:
+	clk_bulk_disable_unprepare(ahub->nclocks, ahub->clocks);
+
+	return ret;
 }
 
 int tegra30_ahub_allocate_rx_fifo(enum tegra30_ahub_rxcif *rxcif,
@@ -519,7 +544,6 @@ static int tegra30_ahub_probe(struct platform_device *pdev)
 	/*
 	 * The AHUB hosts a register bus: the "configlink". For this to
 	 * operate correctly, all devices on this bus must be out of reset.
-	 * Ensure that here.
 	 */
 	for (i = 0; i < ARRAY_SIZE(configlink_mods); i++) {
 		if (!(configlink_mods[i].mod_list_mask &
@@ -535,10 +559,8 @@ static int tegra30_ahub_probe(struct platform_device *pdev)
 			return ret;
 		}
 
-		ret = reset_control_deassert(rst);
+		/* just check presence of the reset control in DT */
 		reset_control_put(rst);
-		if (ret)
-			return ret;
 	}
 
 	ahub = devm_kzalloc(&pdev->dev, sizeof(struct tegra30_ahub),
@@ -557,6 +579,12 @@ static int tegra30_ahub_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ahub->reset = devm_reset_control_array_get_exclusive(&pdev->dev);
+	if (IS_ERR(ahub->reset)) {
+		dev_err(&pdev->dev, "Can't get resets: %pe\n", ahub->reset);
+		return PTR_ERR(ahub->reset);
+	}
+
 	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	regs_apbif = devm_ioremap_resource(&pdev->dev, res0);
 	if (IS_ERR(regs_apbif))
diff --git a/sound/soc/tegra/tegra30_ahub.h b/sound/soc/tegra/tegra30_ahub.h
index 01480d7dc940..3b85244f87f1 100644
--- a/sound/soc/tegra/tegra30_ahub.h
+++ b/sound/soc/tegra/tegra30_ahub.h
@@ -511,6 +511,7 @@ struct tegra30_ahub_soc_data {
 struct tegra30_ahub {
 	const struct tegra30_ahub_soc_data *soc_data;
 	struct device *dev;
+	struct reset_control *reset;
 	struct clk_bulk_data clocks[2];
 	unsigned int nclocks;
 	resource_size_t apbif_addr;
-- 
2.29.2


  parent reply	other threads:[~2021-01-20  0:35 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-20  0:31 [PATCH v3 0/6] Clock and reset improvements for Tegra ALSA drivers Dmitry Osipenko
2021-01-20  0:31 ` [PATCH v3 1/6] ALSA: hda/tegra: Use clk_bulk helpers Dmitry Osipenko
2021-01-26  6:33   ` Takashi Iwai
2021-01-20  0:31 ` [PATCH v3 2/6] ALSA: hda/tegra: Reset hardware Dmitry Osipenko
2021-01-25 15:18   ` Takashi Iwai
2021-01-25 15:27     ` Dmitry Osipenko
2021-01-26  6:33       ` Takashi Iwai
2021-01-20  0:31 ` [PATCH v3 3/6] ALSA: hda/tegra: Remove unnecessary null-check from hda_tegra_runtime_resume() Dmitry Osipenko
2021-01-26  6:34   ` Takashi Iwai
2021-01-20  0:31 ` [PATCH v3 4/6] ASoC: tegra: ahub: Add missing resets Dmitry Osipenko
2021-01-20  0:31 ` [PATCH v3 5/6] ASoC: tegra: ahub: Use clk_bulk helpers Dmitry Osipenko
2021-01-20  0:31 ` Dmitry Osipenko [this message]
2021-01-25 15:18 ` [PATCH v3 0/6] Clock and reset improvements for Tegra ALSA drivers Takashi Iwai
2021-01-25 18:02 ` (subset) " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210120003154.26749-7-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=jonathanh@nvidia.com \
    --cc=kwizart@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mattmerhar@protonmail.com \
    --cc=perex@perex.cz \
    --cc=pgwipeout@gmail.com \
    --cc=spujar@nvidia.com \
    --cc=thierry.reding@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).