alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Tanure <tanureal@opensource.cirrus.com>
To: James Schulman <james.schulman@cirrus.com>,
	David Rhodes <david.rhodes@cirrus.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>
Cc: patches@opensource.cirrus.com,
	Richard Fitzgerald <rf@opensource.cirrus.com>,
	alsa-devel@alsa-project.org,
	Lucas Tanure <tanureal@opensource.cirrus.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 13/15] ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT
Date: Fri, 5 Mar 2021 17:34:40 +0000	[thread overview]
Message-ID: <20210305173442.195740-14-tanureal@opensource.cirrus.com> (raw)
In-Reply-To: <20210305173442.195740-1-tanureal@opensource.cirrus.com>

From: Richard Fitzgerald <rf@opensource.cirrus.com>

There must be a delay of at least 150us after writing SCLK_PRESENT
before issuing another I2C write.

This is done using struct reg_sequence because it can specify a delay
after the write and the whole sequence is written atomically.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
---
Changes in v2:
- struct cs42l42_private add by this patch was wrong and moved to the
correct patch
- Lucas signed-off added

 sound/soc/codecs/cs42l42.c | 27 ++++++++++++++++++++++-----
 sound/soc/codecs/cs42l42.h |  1 +
 2 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index f0270de2ccb8a..4181765d99af7 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -549,6 +549,24 @@ static const struct snd_soc_component_driver soc_component_dev_cs42l42 = {
 	.non_legacy_dai_naming	= 1,
 };
 
+/* Switch to SCLK. Atomic delay after the write to allow the switch to complete. */
+static const struct reg_sequence cs42l42_to_sclk_seq[] = {
+	{
+		.reg = CS42L42_OSC_SWITCH,
+		.def = CS42L42_SCLK_PRESENT_MASK,
+		.delay_us = CS42L42_CLOCK_SWITCH_DELAY_US,
+	},
+};
+
+/* Switch to OSC. Atomic delay after the write to allow the switch to complete. */
+static const struct reg_sequence cs42l42_to_osc_seq[] = {
+	{
+		.reg = CS42L42_OSC_SWITCH,
+		.def = 0,
+		.delay_us = CS42L42_CLOCK_SWITCH_DELAY_US,
+	},
+};
+
 struct cs42l42_pll_params {
 	u32 sclk;
 	u8 mclk_div;
@@ -861,8 +879,8 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
 			 * SCLK must remain running until after this clock switch.
 			 * Without a source of clock the I2C bus doesn't work.
 			 */
-			snd_soc_component_update_bits(component, CS42L42_OSC_SWITCH,
-						      CS42L42_SCLK_PRESENT_MASK, 0);
+			regmap_multi_reg_write(cs42l42->regmap, cs42l42_to_osc_seq,
+					       ARRAY_SIZE(cs42l42_to_osc_seq));
 			snd_soc_component_update_bits(component, CS42L42_PLL_CTL1,
 						      CS42L42_PLL_START_MASK, 0);
 		}
@@ -873,9 +891,8 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
 						      CS42L42_PLL_START_MASK, 1);
 
 			/* Mark SCLK as present, turn off internal oscillator */
-			snd_soc_component_update_bits(component, CS42L42_OSC_SWITCH,
-						      CS42L42_SCLK_PRESENT_MASK,
-						      CS42L42_SCLK_PRESENT_MASK);
+			regmap_multi_reg_write(cs42l42->regmap, cs42l42_to_sclk_seq,
+					       ARRAY_SIZE(cs42l42_to_sclk_seq));
 		}
 		cs42l42->stream_use |= 1 << stream;
 
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 429c6833fc811..214cee762709d 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -755,6 +755,7 @@
 
 #define CS42L42_NUM_SUPPLIES	5
 #define CS42L42_BOOT_TIME_US	3000
+#define CS42L42_CLOCK_SWITCH_DELAY_US 150
 
 static const char *const cs42l42_supply_names[CS42L42_NUM_SUPPLIES] = {
 	"VA",
-- 
2.30.1


  parent reply	other threads:[~2021-03-05 17:40 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-05 17:34 [PATCH v2 00/15] Report jack and button detection + Capture Support Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 01/15] ASoC: cs42l42: Fix Bitclock polarity inversion Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 02/15] ASoC: cs42l42: Fix channel width support Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 03/15] ASoC: cs42l42: Fix mixer volume control Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 04/15] ASoC: cs42l42: Don't enable/disable regulator at Bias Level Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 05/15] ASoC: cs42l42: Always wait at least 3ms after reset Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 06/15] ASoC: cs42l42: Remove power if the driver is being removed Lucas Tanure
2021-03-05 18:49   ` Mark Brown
2021-03-05 17:34 ` [PATCH v2 07/15] ASoC: cs42l42: Disable regulators if probe fails Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 08/15] ASoC: cs42l42: Provide finer control on playback path Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 09/15] ASoC: cs42l42: Set clock source for both ways of stream Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 10/15] ASoC: cs42l42: Add Capture Support Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 11/15] ASoC: cs42l42: Report jack and button detection Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 12/15] ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called Lucas Tanure
2021-03-05 17:34 ` Lucas Tanure [this message]
2021-03-05 17:34 ` [PATCH v2 14/15] ASoC: cs42l42: Only start PLL if it is needed Lucas Tanure
2021-03-05 17:34 ` [PATCH v2 15/15] ASoC: cs42l42: Wait for PLL to lock before switching to it Lucas Tanure
2021-03-08 16:06 ` (subset) [PATCH v2 00/15] Report jack and button detection + Capture Support Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210305173442.195740-14-tanureal@opensource.cirrus.com \
    --to=tanureal@opensource.cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=david.rhodes@cirrus.com \
    --cc=james.schulman@cirrus.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=rf@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).