From: Jon Hunter <jonathanh@nvidia.com>
To: Ben Dooks <ben.dooks@codethink.co.uk>,
<linux-tegra@vger.kernel.org>, <alsa-devel@alsa-project.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>
Cc: linux-kernel@lists.codethink.co.uk,
Edward Cragg <edward.cragg@codethink.co.uk>
Subject: Re: [alsa-devel] [PATCH v5 3/7] ASoC: tegra: i2s: Add support for more than 2 channels
Date: Thu, 24 Oct 2019 17:12:21 +0100 [thread overview]
Message-ID: <2eef499e-d9d4-732a-ddd6-8d307d8cb08d@nvidia.com> (raw)
In-Reply-To: <20191018154833.7560-4-ben.dooks@codethink.co.uk>
On 18/10/2019 16:48, Ben Dooks wrote:
> From: Edward Cragg <edward.cragg@codethink.co.uk>
>
> The CIF configuration and clock setting is currently hard coded for 2
> channels. Since the hardware is capable of supporting 1-8 channels add
> support for reading the channel count from the supplied parameters to
> allow for better TDM support. It seems the original implementation of this
> driver was fixed at 2 channels for simplicity, and not implementing TDM.
>
> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
> [ben.dooks@codethink.co.uk: added is_tdm and channel nr check]
> [ben.dooks@codethink.co.uk: merge edge control into set-format]
> [ben.dooks@codethink.co.uk: removed is_tdm and moved edge to hw_params]
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> ---
> v2:
> - fix the lrclk for dsp-b format
> ---
> sound/soc/tegra/tegra30_i2s.c | 21 +++++++++++++--------
> 1 file changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
> index 063f34c882af..fc77e65a3646 100644
> --- a/sound/soc/tegra/tegra30_i2s.c
> +++ b/sound/soc/tegra/tegra30_i2s.c
> @@ -67,6 +67,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
> {
> struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
> unsigned int mask = 0, val = 0;
> + unsigned int ch_mask, ch_val = 0;
>
> switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
> case SND_SOC_DAIFMT_NB_NF:
> @@ -75,6 +76,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
> return -EINVAL;
> }
>
> + ch_mask = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_MASK;
> mask |= TEGRA30_I2S_CTRL_MASTER_ENABLE;
> switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> case SND_SOC_DAIFMT_CBS_CFS:
> @@ -90,10 +92,12 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
> TEGRA30_I2S_CTRL_LRCK_MASK;
> switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> case SND_SOC_DAIFMT_DSP_A:
> + ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
Sorry, I just saw the feedback on the previous iteration. I don't think
we want to set the polarity but based upon the format that is passed ...
https://nv-tegra.nvidia.com/gitweb/?p=linux-nvidia.git;a=blob;f=sound/soc/tegra-alt/tegra210_i2s_alt.c;h=24cf3b55326f687aded22b91182df41c5ae188ac;hb=703aa948d2c92b87fd84f367f43a07778ed098b5#l333
Cheers
Jon
--
nvpublic
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2019-10-24 16:13 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-18 15:48 [alsa-devel] tegra30 tdm audio support Ben Dooks
2019-10-18 15:48 ` [alsa-devel] [PATCH v5 1/7] ASoC: tegra: add a TDM configuration callback Ben Dooks
2019-10-24 15:50 ` Jon Hunter
2019-10-25 10:12 ` [alsa-devel] Applied "ASoC: tegra: add a TDM configuration callback" to the asoc tree Mark Brown
2019-10-18 15:48 ` [alsa-devel] [PATCH v5 2/7] ASoC: tegra: Allow 24bit and 32bit samples Ben Dooks
2019-10-24 15:54 ` Jon Hunter
2019-10-25 10:12 ` [alsa-devel] Applied "ASoC: tegra: Allow 24bit and 32bit samples" to the asoc tree Mark Brown
2019-11-23 21:09 ` [alsa-devel] [PATCH v5 2/7] ASoC: tegra: Allow 24bit and 32bit samples Dmitry Osipenko
2019-11-25 10:37 ` Ben Dooks
2019-11-25 17:22 ` Dmitry Osipenko
2019-11-25 17:28 ` Dmitry Osipenko
2019-12-19 21:21 ` Dmitry Osipenko
2019-12-20 10:56 ` Ben Dooks
2019-12-20 11:30 ` Jon Hunter
2019-12-20 11:38 ` Ben Dooks
2019-12-20 13:57 ` Jon Hunter
2019-12-20 14:43 ` Dmitry Osipenko
2019-12-20 14:56 ` Ben Dooks
2019-12-20 15:02 ` Dmitry Osipenko
2019-12-20 15:25 ` Ben Dooks
2019-12-20 16:40 ` Dmitry Osipenko
2019-12-20 17:06 ` Ben Dooks
2019-12-22 17:08 ` Dmitry Osipenko
2020-01-05 0:04 ` Ben Dooks
2020-01-05 1:48 ` Dmitry Osipenko
2020-01-05 10:53 ` Ben Dooks
2020-01-06 19:00 ` [alsa-devel] [Linux-kernel] " Ben Dooks
2020-01-07 1:39 ` Dmitry Osipenko
2020-01-08 11:37 ` Jon Hunter
2020-01-20 16:50 ` Dmitry Osipenko
2020-01-20 17:36 ` Ben Dooks
2020-01-23 19:38 ` Ben Dooks
2020-01-23 21:59 ` Ben Dooks
2020-01-23 22:11 ` Dmitry Osipenko
2020-01-24 4:31 ` Dmitry Osipenko
2020-01-24 16:56 ` Jon Hunter
2020-01-24 17:00 ` Mark Brown
2020-01-24 17:03 ` Ben Dooks
2020-01-24 16:50 ` Jon Hunter
2020-01-24 17:00 ` Ben Dooks
2020-01-28 7:49 ` Ricard Wanderlof
2020-01-24 17:06 ` Ben Dooks
2020-01-27 19:20 ` Dmitry Osipenko
2020-01-27 19:23 ` Dmitry Osipenko
2020-01-28 8:59 ` Ben Dooks
2020-01-28 13:19 ` Jon Hunter
2020-01-28 15:25 ` Dmitry Osipenko
2020-01-28 15:26 ` Mark Brown
2020-01-28 17:45 ` Dmitry Osipenko
2020-01-28 18:42 ` Jon Hunter
2020-01-30 8:04 ` Ben Dooks
2020-01-28 8:58 ` Ben Dooks
2020-01-28 12:13 ` Mark Brown
2020-01-28 17:42 ` Dmitry Osipenko
2020-01-28 18:19 ` Jon Hunter
2020-01-29 0:17 ` Dmitry Osipenko
2020-01-30 8:05 ` [alsa-devel] (no subject) Ben Dooks
2020-01-30 9:31 ` Clemens Ladisch
2020-01-30 9:39 ` Ben Dooks
2020-01-30 14:58 ` Clemens Ladisch
2020-01-31 10:50 ` Ben Dooks
2020-01-31 11:03 ` Clemens Ladisch
2020-01-29 10:49 ` [alsa-devel] [Linux-kernel] [PATCH v5 2/7] ASoC: tegra: Allow 24bit and 32bit samples Jon Hunter
2020-01-29 14:33 ` Jon Hunter
2020-01-29 15:22 ` Dmitry Osipenko
2020-01-30 8:17 ` Ben Dooks
2020-01-30 12:05 ` Jon Hunter
2020-01-30 12:07 ` Ben Dooks
2020-01-30 13:09 ` Jon Hunter
2020-01-30 13:10 ` Mark Brown
2020-03-19 15:32 ` Ben Dooks
2020-03-20 14:18 ` Dmitry Osipenko
2020-01-30 8:06 ` Ben Dooks
2020-01-29 17:52 ` Ben Dooks
2020-01-07 10:29 ` [alsa-devel] " Jon Hunter
2020-01-07 10:35 ` Ben Dooks
2020-01-21 18:15 ` Ben Dooks
2020-01-21 18:54 ` Dmitry Osipenko
2019-10-18 15:48 ` [alsa-devel] [PATCH v5 3/7] ASoC: tegra: i2s: Add support for more than 2 channels Ben Dooks
2019-10-24 16:12 ` Jon Hunter [this message]
2019-10-24 19:18 ` Mark Brown
2019-10-25 7:48 ` Jon Hunter
2019-10-18 15:48 ` [alsa-devel] [PATCH v5 4/7] ASoC: tegra: disable rx_fifo after disable stream Ben Dooks
2019-10-24 16:12 ` Jon Hunter
2019-10-25 10:12 ` [alsa-devel] Applied "ASoC: tegra: disable rx_fifo after disable stream" to the asoc tree Mark Brown
2019-10-18 15:48 ` [alsa-devel] [PATCH v5 5/7] ASoC: tegra: set i2s_offset to 0 for tdm Ben Dooks
2019-10-25 7:58 ` Jon Hunter
2019-10-18 15:48 ` [alsa-devel] [PATCH v5 6/7] ASoC: tegra: config fifos on hw_param changes Ben Dooks
2019-10-25 8:18 ` Jon Hunter
2019-10-18 15:48 ` [alsa-devel] [PATCH v5 7/7] ASoC: tegra: take packing settings from the audio cif_config Ben Dooks
2019-10-25 8:47 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2eef499e-d9d4-732a-ddd6-8d307d8cb08d@nvidia.com \
--to=jonathanh@nvidia.com \
--cc=alsa-devel@alsa-project.org \
--cc=ben.dooks@codethink.co.uk \
--cc=broonie@kernel.org \
--cc=edward.cragg@codethink.co.uk \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@lists.codethink.co.uk \
--cc=linux-tegra@vger.kernel.org \
--cc=perex@perex.cz \
--cc=thierry.reding@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).