* [PATCH v5 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation
@ 2020-10-29 6:05 Kuninori Morimoto
2020-10-29 6:06 ` [PATCH v5 1/3] dt-bindings: ASoC: " Kuninori Morimoto
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Kuninori Morimoto @ 2020-10-29 6:05 UTC (permalink / raw)
To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar
Hi Rob, Mark
Cc: Sameer
These are v5 of switch to yaml base Documentation for
audio-graph-card and renesas,rsnd which uses audio-graph-card.
v4 -> v5
- move "endpoint" under "port"
v3 -> v4
- fixuped yamllint warnings/errors
v2 -> v3
- fixuped Rob's pointed points
v1 -> v2
- upgrade dt-schema, and fixup errors for [2/2] patch
Kuninori Morimoto (3):
dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
dt-bindings: ASoC: renesas,rsnd: switch to yaml base Documentation
dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support
.../bindings/sound/audio-graph-card.txt | 337 ------------
.../bindings/sound/audio-graph-card.yaml | 162 ++++++
.../bindings/sound/renesas,rsnd.txt | 520 ------------------
.../bindings/sound/renesas,rsnd.yaml | 457 +++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +-
5 files changed, 620 insertions(+), 858 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
--
2.25.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v5 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
2020-10-29 6:05 [PATCH v5 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation Kuninori Morimoto
@ 2020-10-29 6:06 ` Kuninori Morimoto
2020-10-29 6:22 ` Sameer Pujar
2020-11-04 20:33 ` Rob Herring
2020-10-29 6:06 ` [PATCH v5 2/3] dt-bindings: ASoC: renesas, rsnd: " Kuninori Morimoto
2020-10-29 6:06 ` [PATCH v5 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support Kuninori Morimoto
2 siblings, 2 replies; 8+ messages in thread
From: Kuninori Morimoto @ 2020-10-29 6:06 UTC (permalink / raw)
To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
This patch switches from .txt base to .yaml base Document.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
.../bindings/sound/audio-graph-card.txt | 337 ------------------
.../bindings/sound/audio-graph-card.yaml | 162 +++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +-
3 files changed, 163 insertions(+), 338 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
deleted file mode 100644
index d5f6919a2d69..000000000000
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ /dev/null
@@ -1,337 +0,0 @@
-Audio Graph Card:
-
-Audio Graph Card specifies audio DAI connections of SoC <-> codec.
-It is based on common bindings for device graphs.
-see ${LINUX}/Documentation/devicetree/bindings/graph.txt
-
-Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
-
-Below are same as Simple-Card.
-
-- label
-- widgets
-- routing
-- dai-format
-- frame-master
-- bitclock-master
-- bitclock-inversion
-- frame-inversion
-- mclk-fs
-- hp-det-gpio
-- mic-det-gpio
-- dai-tdm-slot-num
-- dai-tdm-slot-width
-- clocks / system-clock-frequency
-
-Required properties:
-
-- compatible : "audio-graph-card";
-- dais : list of CPU DAI port{s}
-
-Optional properties:
-- pa-gpios: GPIO used to control external amplifier.
-
------------------------
-Example: Single DAI case
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- dais = <&cpu_port>;
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
- audio-codec {
- ...
- port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
- };
-
------------------------
-Example: Multi DAI case
------------------------
-
- sound-card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
-
- dais = <&cpu_port0
- &cpu_port1
- &cpu_port2>;
- };
-
- audio-codec@0 {
- ...
- port {
- codec0_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint0>;
- };
- };
- };
-
- audio-codec@1 {
- ...
- port {
- codec1_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint1>;
- };
- };
- };
-
- audio-codec@2 {
- ...
- port {
- codec2_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint2>;
- };
- };
- };
-
- dai-controller {
- ...
- ports {
- cpu_port0: port@0 {
- cpu_endpoint0: endpoint {
- remote-endpoint = <&codec0_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- cpu_port1: port@1 {
- cpu_endpoint1: endpoint {
- remote-endpoint = <&codec1_endpoint>;
-
- dai-format = "i2s";
- ...
- };
- };
- cpu_port2: port@2 {
- cpu_endpoint2: endpoint {
- remote-endpoint = <&codec2_endpoint>;
-
- dai-format = "i2s";
- ...
- };
- };
- };
- };
-
-
------------------------
-Example: Sampling Rate Conversion
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
- prefix = "codec";
- routing = "codec Playback", "DAI0 Playback",
- "DAI0 Capture", "codec Capture";
- convert-rate = <48000>;
-
- dais = <&cpu_port>;
- };
-
- audio-codec {
- ...
- port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
------------------------
-Example: 2 CPU 1 Codec (Mixing)
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
- routing = "codec Playback", "DAI0 Playback",
- "codec Playback", "DAI1 Playback",
- "DAI0 Capture", "codec Capture";
-
- dais = <&cpu_port>;
- };
-
- audio-codec {
- ...
-
- audio-graph-card,prefix = "codec";
- audio-graph-card,convert-rate = <48000>;
- port {
- reg = <0>;
- codec_endpoint0: endpoint@0 {
- remote-endpoint = <&cpu_endpoint0>;
- };
- codec_endpoint1: endpoint@1 {
- remote-endpoint = <&cpu_endpoint1>;
- };
- };
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint0: endpoint@0 {
- remote-endpoint = <&codec_endpoint0>;
-
- dai-format = "left_j";
- ...
- };
- cpu_endpoint1: endpoint@1 {
- remote-endpoint = <&codec_endpoint1>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
------------------------
-Example: Multi DAI with DPCM
------------------------
-
- CPU0 ------ ak4613
- CPU1 ------ HDMI
- CPU2 ------ PCM3168A-p /* DPCM 1ch/2ch */
- CPU3 --/ /* DPCM 3ch/4ch */
- CPU4 --/ /* DPCM 5ch/6ch */
- CPU5 --/ /* DPCM 7ch/8ch */
- CPU6 ------ PCM3168A-c
-
- sound_card: sound {
- compatible = "audio-graph-card";
-
- label = "sound-card";
-
- routing = "pcm3168a Playback", "DAI2 Playback",
- "pcm3168a Playback", "DAI3 Playback",
- "pcm3168a Playback", "DAI4 Playback",
- "pcm3168a Playback", "DAI5 Playback";
-
- dais = <&snd_port0 /* ak4613 */
- &snd_port1 /* HDMI0 */
- &snd_port2 /* pcm3168a playback */
- &snd_port3 /* pcm3168a capture */
- >;
- };
-
- ak4613: codec@10 {
- ...
- port {
- ak4613_endpoint: endpoint {
- remote-endpoint = <&rsnd_endpoint0>;
- };
- };
- };
-
- pcm3168a: audio-codec@44 {
- ...
- audio-graph-card,prefix = "pcm3168a";
- audio-graph-card,convert-channels = <8>; /* TDM Split */
- ports {
- port@0 {
- reg = <0>;
- pcm3168a_endpoint_p1: endpoint@1 {
- remote-endpoint = <&rsnd_endpoint2>;
- ...
- };
- pcm3168a_endpoint_p2: endpoint@2 {
- remote-endpoint = <&rsnd_endpoint3>;
- ...
- };
- pcm3168a_endpoint_p3: endpoint@3 {
- remote-endpoint = <&rsnd_endpoint4>;
- ...
- };
- pcm3168a_endpoint_p4: endpoint@4 {
- remote-endpoint = <&rsnd_endpoint5>;
- ...
- };
- };
- port@1 {
- reg = <1>;
- pcm3168a_endpoint_c: endpoint {
- remote-endpoint = <&rsnd_endpoint6>;
- ...
- };
- };
- };
- };
-
- &sound {
- ports {
- snd_port0: port@0 {
- rsnd_endpoint0: endpoint {
- remote-endpoint = <&ak4613_endpoint>;
- ...
- };
- };
- snd_port1: port@1 {
- rsnd_endpoint1: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
- ...
- };
- };
- snd_port2: port@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- rsnd_endpoint2: endpoint@2 {
- remote-endpoint = <&pcm3168a_endpoint_p1>;
- ...
- };
- rsnd_endpoint3: endpoint@3 {
- remote-endpoint = <&pcm3168a_endpoint_p2>;
- ...
- };
- rsnd_endpoint4: endpoint@4 {
- remote-endpoint = <&pcm3168a_endpoint_p3>;
- ...
- };
- rsnd_endpoint5: endpoint@5 {
- remote-endpoint = <&pcm3168a_endpoint_p4>;
- ...
- };
- };
- snd_port3: port@6 {
- rsnd_endpoint6: endpoint {
- remote-endpoint = <&pcm3168a_endpoint_c>;
- ...
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
new file mode 100644
index 000000000000..a251d7af6f96
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card Driver Device Tree Bindings
+
+maintainers:
+ - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+ compatible:
+ enum:
+ - audio-graph-card
+ - audio-graph-scu-card
+
+ dais:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ label:
+ maxItems: 1
+ prefix:
+ description: "device name prefix"
+ $ref: /schemas/types.yaml#/definitions/string
+ "audio-graph-card,prefix":
+ description: "device name prefix"
+ $ref: /schemas/types.yaml#/definitions/string
+ routing:
+ description: |
+ A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's source.
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ widgets:
+ description: User specified audio sound widgets.
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ "audio-graph-card,convert-rate":
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ "audio-graph-card,convert-channels":
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ pa-gpios:
+ maxItems: 1
+ hp-det-gpio:
+ maxItems: 1
+ mic-det-gpio:
+ maxItems: 1
+
+ port:
+ description: single OF-Graph subnode
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+ prefix:
+ description: "device name prefix"
+ $ref: /schemas/types.yaml#/definitions/string
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ patternProperties:
+ "^endpoint(@[0-9a-f]+)?":
+ type: object
+ properties:
+ remote-endpoint:
+ maxItems: 1
+ mclk-fs:
+ description: |
+ Multiplication factor between stream rate and codec mclk.
+ When defined, mclk-fs property defined in dai-link sub nodes are ignored.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ frame-inversion:
+ description: dai-link uses frame clock inversion
+ $ref: /schemas/types.yaml#/definitions/flag
+ bitclock-inversion:
+ description: dai-link uses bit clock inversion
+ $ref: /schemas/types.yaml#/definitions/flag
+ frame-master:
+ description: Indicates dai-link frame master.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ bitclock-master:
+ description: Indicates dai-link bit clock master
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ dai-format:
+ description: audio format.
+ items:
+ enum:
+ - i2s
+ - right_j
+ - left_j
+ - dsp_a
+ - dsp_b
+ - ac97
+ - pdm
+ - msb
+ - lsb
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ required:
+ - remote-endpoint
+
+ ports:
+ description: multi OF-Graph subnode
+ type: object
+ patternProperties:
+ "^port(@[0-9a-f]+)?":
+ $ref: "#/properties/port"
+
+required:
+ - compatible
+ - dais
+
+additionalProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "audio-graph-card";
+
+ dais = <&cpu_port_a>;
+ };
+
+ cpu {
+ /*
+ * dai-controller own settings
+ */
+
+ port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ dai-format = "left_j";
+ };
+ };
+ };
+
+ codec {
+ /*
+ * codec own settings
+ */
+
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 2735be1a8470..a4fe8f6cec6c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -20,7 +20,7 @@ patternProperties:
"^(keypad|m25p|max8952|max8997|max8998|mpmc),.*": true
"^(pinctrl-single|#pinctrl-single|PowerPC),.*": true
"^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true
- "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true
+ "^(simple-audio-card|audio-graph-card|st-plgpio|st-spics|ts),.*": true
# Keep list in alphabetical order.
"^70mai,.*":
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v5 2/3] dt-bindings: ASoC: renesas, rsnd: switch to yaml base Documentation
2020-10-29 6:05 [PATCH v5 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation Kuninori Morimoto
2020-10-29 6:06 ` [PATCH v5 1/3] dt-bindings: ASoC: " Kuninori Morimoto
@ 2020-10-29 6:06 ` Kuninori Morimoto
2020-11-04 20:51 ` [PATCH v5 2/3] dt-bindings: ASoC: renesas,rsnd: " Rob Herring
2020-10-29 6:06 ` [PATCH v5 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support Kuninori Morimoto
2 siblings, 1 reply; 8+ messages in thread
From: Kuninori Morimoto @ 2020-10-29 6:06 UTC (permalink / raw)
To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
This patch switches from .txt base to .yaml base Document.
It is still keeping detail explanations at .txt
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
.../bindings/sound/renesas,rsnd.txt | 520 ------------------
.../bindings/sound/renesas,rsnd.yaml | 456 +++++++++++++++
2 files changed, 456 insertions(+), 520 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index b39743d3f7c4..b731f16aea84 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -253,523 +253,3 @@ This is example of TDM 6ch.
Driver can automatically switches TDM <-> stereo mode in this case.
see "Example: simple sound card for TDM"
-
-=============================================
-Required properties:
-=============================================
-
-- compatible : "renesas,rcar_sound-<soctype>", fallbacks
- "renesas,rcar_sound-gen1" if generation1, and
- "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
- "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
- Examples with soctypes are:
- - "renesas,rcar_sound-r8a7742" (RZ/G1H)
- - "renesas,rcar_sound-r8a7743" (RZ/G1M)
- - "renesas,rcar_sound-r8a7744" (RZ/G1N)
- - "renesas,rcar_sound-r8a7745" (RZ/G1E)
- - "renesas,rcar_sound-r8a77470" (RZ/G1C)
- - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
- - "renesas,rcar_sound-r8a774b1" (RZ/G2N)
- - "renesas,rcar_sound-r8a774c0" (RZ/G2E)
- - "renesas,rcar_sound-r8a774e1" (RZ/G2H)
- - "renesas,rcar_sound-r8a7778" (R-Car M1A)
- - "renesas,rcar_sound-r8a7779" (R-Car H1)
- - "renesas,rcar_sound-r8a7790" (R-Car H2)
- - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
- - "renesas,rcar_sound-r8a7793" (R-Car M2-N)
- - "renesas,rcar_sound-r8a7794" (R-Car E2)
- - "renesas,rcar_sound-r8a7795" (R-Car H3)
- - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
- - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
- - "renesas,rcar_sound-r8a77990" (R-Car E3)
- - "renesas,rcar_sound-r8a77995" (R-Car D3)
-- reg : Should contain the register physical address.
- required register is
- SRU/ADG/SSI if generation1
- SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3
- Select extended AUDIO-DMAC-periperi address if SoC has it,
- otherwise select normal AUDIO-DMAC-periperi address.
-- reg-names : Should contain the register names.
- scu/adg/ssi if generation1
- scu/adg/ssiu/ssi/audmapp if generation2/generation3
-- rcar_sound,ssi : Should contain SSI feature.
- The number of SSI subnode should be same as HW.
- see below for detail.
-- rcar_sound,ssiu : Should contain SSIU feature.
- The number of SSIU subnode should be same as HW.
- see below for detail.
-- rcar_sound,src : Should contain SRC feature.
- The number of SRC subnode should be same as HW.
- see below for detail.
-- rcar_sound,ctu : Should contain CTU feature.
- The number of CTU subnode should be same as HW.
- see below for detail.
-- rcar_sound,mix : Should contain MIX feature.
- The number of MIX subnode should be same as HW.
- see below for detail.
-- rcar_sound,dvc : Should contain DVC feature.
- The number of DVC subnode should be same as HW.
- see below for detail.
-- rcar_sound,dai : DAI contents.
- The number of DAI subnode should be same as HW.
- see below for detail.
-- #sound-dai-cells : it must be 0 if your system is using single DAI
- it must be 1 if your system is using multi DAI
-- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
-- clock-names : List of necessary clock names.
- "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
- "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
-
-Optional properties:
-- #clock-cells : it must be 0 if your system has audio_clkout
- it must be 1 if your system has audio_clkout0/1/2/3
-- clock-frequency : for all audio_clkout0/1/2/3
-- clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn
- is asynchronizes with lr-clock.
-- resets : References to SSI resets.
-- reset-names : List of valid reset names.
- "ssi-all", "ssi.X"
-
-SSI subnode properties:
-- interrupts : Should contain SSI interrupt for PIO transfer
-- shared-pin : if shared clock pin
-- pio-transfer : use PIO transfer mode
-- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case
-- dma : Should contain Audio DMAC entry
-- dma-names : SSI case "rx" (=playback), "tx" (=capture)
- Deprecated: see SSIU subnode properties
- SSIU case "rxu" (=playback), "txu" (=capture)
-
-SSIU subnode properties:
-- dma : Should contain Audio DMAC entry
-- dma-names : "rx" (=playback), "tx" (=capture)
-
-SRC subnode properties:
-- dma : Should contain Audio DMAC entry
-- dma-names : "rx" (=playback), "tx" (=capture)
-
-DVC subnode properties:
-- dma : Should contain Audio DMAC entry
-- dma-names : "tx" (=playback/capture)
-
-DAI subnode properties:
-- playback : list of playback modules
-- capture : list of capture modules
-
-
-=============================================
-Example:
-=============================================
-
-rcar_sound: sound@ec500000 {
- #sound-dai-cells = <1>;
- compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
- reg = <0 0xec500000 0 0x1000>, /* SCU */
- <0 0xec5a0000 0 0x100>, /* ADG */
- <0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x1280>, /* SSI */
- <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
- reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
- clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
- <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
- <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
- <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
- <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
- <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
- <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
- <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
- clock-names = "ssi-all",
- "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
- "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
- "src.9", "src.8", "src.7", "src.6", "src.5",
- "src.4", "src.3", "src.2", "src.1", "src.0",
- "dvc.0", "dvc.1",
- "clk_a", "clk_b", "clk_c", "clk_i";
-
- rcar_sound,dvc {
- dvc0: dvc-0 {
- dmas = <&audma0 0xbc>;
- dma-names = "tx";
- };
- dvc1: dvc-1 {
- dmas = <&audma0 0xbe>;
- dma-names = "tx";
- };
- };
-
- rcar_sound,mix {
- mix0: mix-0 { };
- mix1: mix-1 { };
- };
-
- rcar_sound,ctu {
- ctu00: ctu-0 { };
- ctu01: ctu-1 { };
- ctu02: ctu-2 { };
- ctu03: ctu-3 { };
- ctu10: ctu-4 { };
- ctu11: ctu-5 { };
- ctu12: ctu-6 { };
- ctu13: ctu-7 { };
- };
-
- rcar_sound,src {
- src0: src-0 {
- interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x85>, <&audma1 0x9a>;
- dma-names = "rx", "tx";
- };
- src1: src-1 {
- interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x87>, <&audma1 0x9c>;
- dma-names = "rx", "tx";
- };
- src2: src-2 {
- interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x89>, <&audma1 0x9e>;
- dma-names = "rx", "tx";
- };
- src3: src-3 {
- interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x8b>, <&audma1 0xa0>;
- dma-names = "rx", "tx";
- };
- src4: src-4 {
- interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x8d>, <&audma1 0xb0>;
- dma-names = "rx", "tx";
- };
- src5: src-5 {
- interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x8f>, <&audma1 0xb2>;
- dma-names = "rx", "tx";
- };
- src6: src-6 {
- interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x91>, <&audma1 0xb4>;
- dma-names = "rx", "tx";
- };
- src7: src-7 {
- interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x93>, <&audma1 0xb6>;
- dma-names = "rx", "tx";
- };
- src8: src-8 {
- interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x95>, <&audma1 0xb8>;
- dma-names = "rx", "tx";
- };
- src9: src-9 {
- interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x97>, <&audma1 0xba>;
- dma-names = "rx", "tx";
- };
- };
-
- rcar_sound,ssiu {
- ssiu00: ssiu-0 {
- dmas = <&audma0 0x15>, <&audma1 0x16>;
- dma-names = "rx", "tx";
- };
- ssiu01: ssiu-1 {
- dmas = <&audma0 0x35>, <&audma1 0x36>;
- dma-names = "rx", "tx";
- };
-
- ...
-
- ssiu95: ssiu-49 {
- dmas = <&audma0 0xA5>, <&audma1 0xA6>;
- dma-names = "rx", "tx";
- };
- ssiu96: ssiu-50 {
- dmas = <&audma0 0xA7>, <&audma1 0xA8>;
- dma-names = "rx", "tx";
- };
- ssiu97: ssiu-51 {
- dmas = <&audma0 0xA9>, <&audma1 0xAA>;
- dma-names = "rx", "tx";
- };
- };
-
- rcar_sound,ssi {
- ssi0: ssi-0 {
- interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x01>, <&audma1 0x02>;
- dma-names = "rx", "tx";
- };
- ssi1: ssi-1 {
- interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x03>, <&audma1 0x04>;
- dma-names = "rx", "tx";
- };
-
- ...
-
- ssi8: ssi-8 {
- interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x11>, <&audma1 0x12>;
- dma-names = "rx", "tx";
- };
- ssi9: ssi-9 {
- interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x13>, <&audma1 0x14>;
- dma-names = "rx", "tx";
- };
- };
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi5 &src5>;
- capture = <&ssi6>;
- };
- dai1 {
- playback = <&ssi3>;
- };
- dai2 {
- capture = <&ssi4>;
- };
- dai3 {
- playback = <&ssi7>;
- };
- dai4 {
- capture = <&ssi8>;
- };
- };
-};
-
-=============================================
-Example: simple sound card
-=============================================
-
- rsnd_ak4643: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4643>;
- clocks = <&audio_clock>;
- };
- };
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src2 &dvc0>;
- capture = <&ssi1 &src3 &dvc1>;
- };
- };
-};
-
-&ssi1 {
- shared-pin;
-};
-
-=============================================
-Example: simple sound card for Asynchronous mode
-=============================================
-
-sound {
- compatible = "simple-scu-audio-card";
- ...
- /*
- * SRC Asynchronous mode setting
- * Playback:
- * All input data will be converted to 48kHz
- * Capture:
- * Inputed 48kHz data will be converted to
- * system specified Hz
- */
- simple-audio-card,convert-rate = <48000>;
- ...
- simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
- simple-audio-card,codec {
- ...
- };
-};
-
-=============================================
-Example: simple sound card for channel convert
-=============================================
-
-sound {
- compatible = "simple-scu-audio-card";
- ...
- /*
- * CTU setting
- * All input data will be converted to 2ch
- * as output data
- */
- simple-audio-card,convert-channels = <2>;
- ...
- simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
- simple-audio-card,codec {
- ...
- };
-};
-
-=============================================
-Example: simple sound card for MIXer
-=============================================
-
-sound {
- compatible = "simple-scu-audio-card";
- ...
- simple-audio-card,cpu@0 {
- sound-dai = <&rcar_sound 0>;
- };
- simple-audio-card,cpu@1 {
- sound-dai = <&rcar_sound 1>;
- };
- simple-audio-card,codec {
- ...
- };
-};
-
-&rcar_sound {
- ...
- rcar_sound,dai {
- dai0 {
- playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
- };
- dai1 {
- playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
- };
- };
-};
-
-=============================================
-Example: simple sound card for TDM
-=============================================
-
-rsnd_tdm: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- dai-tdm-slot-num = <6>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&xxx>;
- };
-};
-
-=============================================
-Example: simple sound card for TDM Split
-=============================================
-
-sound_card: sound {
- compatible = "audio-graph-scu-card";
- prefix = "xxxx";
- routing = "xxxx Playback", "DAI0 Playback",
- "xxxx Playback", "DAI1 Playback",
- "xxxx Playback", "DAI2 Playback",
- "xxxx Playback", "DAI3 Playback";
- convert-channels = <8>; /* TDM Split */
-
- dais = <&rsnd_port0 /* playback ch1/ch2 */
- &rsnd_port1 /* playback ch3/ch4 */
- &rsnd_port2 /* playback ch5/ch6 */
- &rsnd_port3 /* playback ch7/ch8 */
- >;
-};
-
-audio-codec {
- ...
- port {
- codec_0: endpoint@1 {
- remote-endpoint = <&rsnd_ep0>;
- };
- codec_1: endpoint@2 {
- remote-endpoint = <&rsnd_ep1>;
- };
- codec_2: endpoint@3 {
- remote-endpoint = <&rsnd_ep2>;
- };
- codec_3: endpoint@4 {
- remote-endpoint = <&rsnd_ep3>;
- };
- };
-};
-
-&rcar_sound {
- ...
- ports {
- rsnd_port0: port@0 {
- rsnd_ep0: endpoint {
- remote-endpoint = <&codec_0>;
- ...
- playback = <&ssiu30 &ssi3>;
- };
- };
- rsnd_port1: port@1 {
- rsnd_ep1: endpoint {
- remote-endpoint = <&codec_1>;
- ...
- playback = <&ssiu31 &ssi3>;
- };
- };
- rsnd_port2: port@2 {
- rsnd_ep2: endpoint {
- remote-endpoint = <&codec_2>;
- ...
- playback = <&ssiu32 &ssi3>;
- };
- };
- rsnd_port3: port@3 {
- rsnd_ep3: endpoint {
- remote-endpoint = <&codec_3>;
- ...
- playback = <&ssiu33 &ssi3>;
- };
- };
- };
-};
-
-=============================================
-Example: simple sound card for Multi channel
-=============================================
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
new file mode 100644
index 000000000000..9be88c2e4f16
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -0,0 +1,456 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Sound Driver Device Tree Bindings
+
+maintainers:
+ - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+
+ compatible:
+ oneOf:
+ # for Gen1 SoC
+ - items:
+ - enum:
+ - renesas,rcar_sound-r8a7778 # R-Car M1A
+ - renesas,rcar_sound-r8a7779 # R-Car H1
+ - enum:
+ - renesas,rcar_sound-gen1
+ # for Gen2 SoC
+ - items:
+ - enum:
+ - renesas,rcar_sound-r8a7742 # RZ/G1H
+ - renesas,rcar_sound-r8a7743 # RZ/G1M
+ - renesas,rcar_sound-r8a7744 # RZ/G1N
+ - renesas,rcar_sound-r8a7745 # RZ/G1E
+ - renesas,rcar_sound-r8a77470 # RZ/G1C
+ - renesas,rcar_sound-r8a7790 # R-Car H2
+ - renesas,rcar_sound-r8a7791 # R-Car M2-W
+ - renesas,rcar_sound-r8a7793 # R-Car M2-N
+ - renesas,rcar_sound-r8a7794 # R-Car E2
+ - enum:
+ - renesas,rcar_sound-gen2
+ # for Gen3 SoC
+ - items:
+ - enum:
+ - renesas,rcar_sound-r8a774a1 # RZ/G2M
+ - renesas,rcar_sound-r8a774b1 # RZ/G2N
+ - renesas,rcar_sound-r8a774c0 # RZ/G2E
+ - renesas,rcar_sound-r8a774e1 # RZ/G2H
+ - renesas,rcar_sound-r8a7795 # R-Car H3
+ - renesas,rcar_sound-r8a7796 # R-Car M3-W
+ - renesas,rcar_sound-r8a77965 # R-Car M3-N
+ - renesas,rcar_sound-r8a77990 # R-Car E3
+ - renesas,rcar_sound-r8a77995 # R-Car D3
+ - enum:
+ - renesas,rcar_sound-gen3
+ # for Generic
+ - items:
+ - enum:
+ - renesas,rcar_sound-gen1
+ - renesas,rcar_sound-gen2
+ - renesas,rcar_sound-gen3
+
+ reg:
+ minItems: 1
+ maxItems: 5
+
+ reg-names:
+ minItems: 1
+ maxItems: 5
+
+ "#sound-dai-cells":
+ description: |
+ it must be 0 if your system is using single DAI
+ it must be 1 if your system is using multi DAIs
+ enum: [0, 1]
+
+ "#clock-cells":
+ description: |
+ it must be 0 if your system has audio_clkout
+ it must be 1 if your system has audio_clkout0/1/2/3
+ enum: [0, 1]
+
+ clock-frequency:
+ description: for audio_clkout0/1/2/3
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ clkout-lr-asynchronous:
+ description: audio_clkoutn is asynchronizes with lr-clock.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ power-domains: true
+
+ resets:
+ maxItems: 11
+
+ reset-names:
+ maxItems: 11
+
+ clocks:
+ description: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
+ minItems: 1
+ maxItems: 31
+
+ clock-names:
+ description: List of necessary clock names.
+ minItems: 1
+ maxItems: 31
+ items:
+ oneOf:
+ - const: ssi-all
+ - pattern: '^ssi\.[0-9]$'
+ - pattern: '^src\.[0-9]$'
+ - pattern: '^mix\.[0-1]$'
+ - pattern: '^ctu\.[0-1]$'
+ - pattern: '^dvc\.[0-1]$'
+ - pattern: '^clk_(a|b|c|i)$'
+
+ port:
+ description: OF-Graph subnode
+ $ref: "audio-graph-card.yaml#/properties/port"
+
+ ports:
+ description: multi OF-Graph subnode
+ $ref: "audio-graph-card.yaml#/properties/ports"
+
+# use patternProperties to avoid naming "xxx,yyy" issue
+patternProperties:
+ "^rcar_sound,dvc$":
+ description: DVC subnode.
+ type: object
+ patternProperties:
+ "^dvc-[0-1]$":
+ type: object
+ properties:
+ dmas:
+ maxItems: 1
+ dma-names:
+ const: "tx"
+ required:
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ "^rcar_sound,mix$":
+ description: MIX subnode.
+ type: object
+ patternProperties:
+ "^mix-[0-1]$":
+ type: object
+ # no propaties
+ additionalProperties: false
+
+ "^rcar_sound,ctu$":
+ description: CTU subnode.
+ type: object
+ patternProperties:
+ "^ctu-[0-7]$":
+ type: object
+ # no propaties
+ additionalProperties: false
+
+ "^rcar_sound,src$":
+ description: SRC subnode.
+ type: object
+ patternProperties:
+ "^src-[0-9]$":
+ type: object
+ properties:
+ interrupts:
+ maxItems: 1
+ dmas:
+ maxItems: 2
+ dma-names:
+ allOf:
+ - items:
+ enum:
+ - tx
+ - rx
+ allOf:
+ - if:
+ properties:
+ status:
+ const: "ok"
+ then:
+ required:
+ - interrupts
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ "^rcar_sound,ssiu$":
+ description: SSIU subnode.
+ type: object
+ patternProperties:
+ "^ssiu-[0-9]+$":
+ type: object
+ properties:
+ dmas:
+ maxItems: 2
+ dma-names:
+ allOf:
+ - items:
+ enum:
+ - tx
+ - rx
+ required:
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ "^rcar_sound,ssi$":
+ description: SSI subnode.
+ type: object
+ patternProperties:
+ "^ssi-[0-9]$":
+ type: object
+ properties:
+ interrupts:
+ maxItems: 1
+ dmas:
+ minItems: 2
+ maxItems: 4
+ dma-names:
+ allOf:
+ - items:
+ enum:
+ - tx
+ - rx
+ - txu # if no ssiu node
+ - rxu # if no ssiu node
+
+ shared-pin:
+ description: shared clock pin
+ $ref: /schemas/types.yaml#/definitions/flag
+ pio-transfer:
+ description: PIO transfer mode
+ $ref: /schemas/types.yaml#/definitions/flag
+ no-busif:
+ description: BUSIF is not used when [mem -> SSI] via DMA case
+ $ref: /schemas/types.yaml#/definitions/flag
+ required:
+ - interrupts
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ # For DAI base
+ "^rcar_sound,dai$":
+ description: DAI subnode.
+ type: object
+ patternProperties:
+ "^dai([0-9]+)?$":
+ type: object
+ properties:
+ playback:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ capture:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ anyOf:
+ - required:
+ - playback
+ - required:
+ - capture
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - "#sound-dai-cells"
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,rcar_sound-gen1
+ then:
+ properties:
+ reg:
+ maxItems: 3
+ reg-names:
+ maxItems: 3
+ items:
+ enum:
+ - scu
+ - ssi
+ - adg
+ else:
+ properties:
+ reg:
+ maxItems: 5
+ reg-names:
+ maxItems: 5
+ items:
+ enum:
+ - scu
+ - adg
+ - ssiu
+ - ssi
+ - audmapp
+
+additionalProperties: false
+
+examples:
+ - |
+ rcar_sound: sound@ec500000 {
+ #sound-dai-cells = <1>;
+ compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
+ reg = <0xec500000 0x1000>, /* SCU */
+ <0xec5a0000 0x100>, /* ADG */
+ <0xec540000 0x1000>, /* SSIU */
+ <0xec541000 0x1280>, /* SSI */
+ <0xec740000 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&mstp10_clks 1005>, /* SSI-ALL */
+ <&mstp10_clks 1006>, <&mstp10_clks 1007>, /* SSI9, SSI8 */
+ <&mstp10_clks 1008>, <&mstp10_clks 1009>, /* SSI7, SSI6 */
+ <&mstp10_clks 1010>, <&mstp10_clks 1011>, /* SSI5, SSI4 */
+ <&mstp10_clks 1012>, <&mstp10_clks 1013>, /* SSI3, SSI2 */
+ <&mstp10_clks 1014>, <&mstp10_clks 1015>, /* SSI1, SSI0 */
+ <&mstp10_clks 1022>, <&mstp10_clks 1023>, /* SRC9, SRC8 */
+ <&mstp10_clks 1024>, <&mstp10_clks 1025>, /* SRC7, SRC6 */
+ <&mstp10_clks 1026>, <&mstp10_clks 1027>, /* SRC5, SRC4 */
+ <&mstp10_clks 1028>, <&mstp10_clks 1029>, /* SRC3, SRC2 */
+ <&mstp10_clks 1030>, <&mstp10_clks 1031>, /* SRC1, SRC0 */
+ <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* MIX1, MIX0 */
+ <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* CTU1, CTU0 */
+ <&mstp10_clks 1019>, <&mstp10_clks 1018>, /* DVC0, DVC1 */
+ <&audio_clk_a>, <&audio_clk_b>, /* CLKA, CLKB */
+ <&audio_clk_c>, <&audio_clk_i>; /* CLKC, CLKI */
+
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8",
+ "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4",
+ "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8",
+ "src.7", "src.6",
+ "src.5", "src.4",
+ "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b",
+ "clk_c", "clk_i";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma0 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma0 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ status = "disabled";
+ };
+ src1: src-1 {
+ interrupts = <0 353 0>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ /* skip after src-2 */
+ };
+
+ rcar_sound,ssiu {
+ ssiu00: ssiu-0 {
+ dmas = <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx";
+ };
+ ssiu01: ssiu-1 {
+ dmas = <&audma0 0x35>, <&audma1 0x36>;
+ dma-names = "rx", "tx";
+ };
+ /* skip after ssiu-2 */
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <0 370 1>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>;
+ dma-names = "rx", "tx";
+ };
+ ssi1: ssi-1 {
+ interrupts = <0 371 1>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>;
+ dma-names = "rx", "tx";
+ };
+ /* skip other ssi-2 */
+ };
+
+ /* DAI base */
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi5 &src5>;
+ capture = <&ssi6>;
+ };
+ dai1 {
+ playback = <&ssi3>;
+ };
+ dai2 {
+ capture = <&ssi4>;
+ };
+ dai3 {
+ playback = <&ssi7>;
+ };
+ dai4 {
+ capture = <&ssi8>;
+ };
+ };
+
+ /* assume audio-graph */
+ port {
+ rsnd_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+
+ dai-format = "left_j";
+ bitclock-master = <&rsnd_endpoint0>;
+ frame-master = <&rsnd_endpoint0>;
+
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+ };
+
+
+ /* assume audio-graph */
+ codec {
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint>;
+ };
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v5 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support
2020-10-29 6:05 [PATCH v5 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation Kuninori Morimoto
2020-10-29 6:06 ` [PATCH v5 1/3] dt-bindings: ASoC: " Kuninori Morimoto
2020-10-29 6:06 ` [PATCH v5 2/3] dt-bindings: ASoC: renesas, rsnd: " Kuninori Morimoto
@ 2020-10-29 6:06 ` Kuninori Morimoto
2020-11-04 20:52 ` Rob Herring
2 siblings, 1 reply; 8+ messages in thread
From: Kuninori Morimoto @ 2020-10-29 6:06 UTC (permalink / raw)
To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Document R-Car M3-W+ (R8A77961) SoC bindings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index 9be88c2e4f16..dd0247802e65 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -43,6 +43,7 @@ properties:
- renesas,rcar_sound-r8a774e1 # RZ/G2H
- renesas,rcar_sound-r8a7795 # R-Car H3
- renesas,rcar_sound-r8a7796 # R-Car M3-W
+ - renesas,rcar_sound-r8a77961 # R-Car M3-W+
- renesas,rcar_sound-r8a77965 # R-Car M3-N
- renesas,rcar_sound-r8a77990 # R-Car E3
- renesas,rcar_sound-r8a77995 # R-Car D3
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v5 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
2020-10-29 6:06 ` [PATCH v5 1/3] dt-bindings: ASoC: " Kuninori Morimoto
@ 2020-10-29 6:22 ` Sameer Pujar
2020-11-04 20:33 ` Rob Herring
1 sibling, 0 replies; 8+ messages in thread
From: Sameer Pujar @ 2020-10-29 6:22 UTC (permalink / raw)
To: Kuninori Morimoto, Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel
> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> This patch switches from .txt base to .yaml base Document.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v5 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
2020-10-29 6:06 ` [PATCH v5 1/3] dt-bindings: ASoC: " Kuninori Morimoto
2020-10-29 6:22 ` Sameer Pujar
@ 2020-11-04 20:33 ` Rob Herring
1 sibling, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-11-04 20:33 UTC (permalink / raw)
To: Kuninori Morimoto; +Cc: devicetree, alsa-devel, Mark Brown, Sameer Pujar
On Thu, Oct 29, 2020 at 03:06:13PM +0900, Kuninori Morimoto wrote:
> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> This patch switches from .txt base to .yaml base Document.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> .../bindings/sound/audio-graph-card.txt | 337 ------------------
> .../bindings/sound/audio-graph-card.yaml | 162 +++++++++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +-
> 3 files changed, 163 insertions(+), 338 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
> create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> new file mode 100644
> index 000000000000..a251d7af6f96
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> @@ -0,0 +1,162 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Audio Graph Card Driver Device Tree Bindings
> +
> +maintainers:
> + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> +
> +properties:
> + compatible:
> + enum:
> + - audio-graph-card
> + - audio-graph-scu-card
> +
> + dais:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + label:
> + maxItems: 1
> + prefix:
> + description: "device name prefix"
> + $ref: /schemas/types.yaml#/definitions/string
> + "audio-graph-card,prefix":
How'd that sneak in? Can we drop or at least mark deprecated? There's
not any users in upstream dts files.
> + description: "device name prefix"
> + $ref: /schemas/types.yaml#/definitions/string
> + routing:
> + description: |
> + A list of the connections between audio components.
> + Each entry is a pair of strings, the first being the
> + connection's sink, the second being the connection's source.
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> + widgets:
> + description: User specified audio sound widgets.
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> + convert-rate:
> + description: CPU to Codec rate convert.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + "audio-graph-card,convert-rate":
Same here.
With that,
Reviewed-by: Rob Herring <robh@kernel.org>
> + description: CPU to Codec rate convert.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + convert-channels:
> + description: CPU to Codec rate channels.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + "audio-graph-card,convert-channels":
> + description: CPU to Codec rate channels.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + pa-gpios:
> + maxItems: 1
> + hp-det-gpio:
> + maxItems: 1
> + mic-det-gpio:
> + maxItems: 1
> +
> + port:
> + description: single OF-Graph subnode
> + type: object
> + properties:
> + reg:
> + maxItems: 1
> + prefix:
> + description: "device name prefix"
> + $ref: /schemas/types.yaml#/definitions/string
> + convert-rate:
> + description: CPU to Codec rate convert.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + convert-channels:
> + description: CPU to Codec rate channels.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + patternProperties:
> + "^endpoint(@[0-9a-f]+)?":
> + type: object
> + properties:
> + remote-endpoint:
> + maxItems: 1
> + mclk-fs:
> + description: |
> + Multiplication factor between stream rate and codec mclk.
> + When defined, mclk-fs property defined in dai-link sub nodes are ignored.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + frame-inversion:
> + description: dai-link uses frame clock inversion
> + $ref: /schemas/types.yaml#/definitions/flag
> + bitclock-inversion:
> + description: dai-link uses bit clock inversion
> + $ref: /schemas/types.yaml#/definitions/flag
> + frame-master:
> + description: Indicates dai-link frame master.
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + maxItems: 1
> + bitclock-master:
> + description: Indicates dai-link bit clock master
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + maxItems: 1
> + dai-format:
> + description: audio format.
> + items:
> + enum:
> + - i2s
> + - right_j
> + - left_j
> + - dsp_a
> + - dsp_b
> + - ac97
> + - pdm
> + - msb
> + - lsb
> + convert-rate:
> + description: CPU to Codec rate convert.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + convert-channels:
> + description: CPU to Codec rate channels.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + required:
> + - remote-endpoint
> +
> + ports:
> + description: multi OF-Graph subnode
> + type: object
> + patternProperties:
> + "^port(@[0-9a-f]+)?":
> + $ref: "#/properties/port"
> +
> +required:
> + - compatible
> + - dais
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + sound {
> + compatible = "audio-graph-card";
> +
> + dais = <&cpu_port_a>;
> + };
> +
> + cpu {
> + /*
> + * dai-controller own settings
> + */
> +
> + port {
> + cpu_endpoint: endpoint {
> + remote-endpoint = <&codec_endpoint>;
> + dai-format = "left_j";
> + };
> + };
> + };
> +
> + codec {
> + /*
> + * codec own settings
> + */
> +
> + port {
> + codec_endpoint: endpoint {
> + remote-endpoint = <&cpu_endpoint>;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 2735be1a8470..a4fe8f6cec6c 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -20,7 +20,7 @@ patternProperties:
> "^(keypad|m25p|max8952|max8997|max8998|mpmc),.*": true
> "^(pinctrl-single|#pinctrl-single|PowerPC),.*": true
> "^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true
> - "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true
> + "^(simple-audio-card|audio-graph-card|st-plgpio|st-spics|ts),.*": true
>
> # Keep list in alphabetical order.
> "^70mai,.*":
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v5 2/3] dt-bindings: ASoC: renesas,rsnd: switch to yaml base Documentation
2020-10-29 6:06 ` [PATCH v5 2/3] dt-bindings: ASoC: renesas, rsnd: " Kuninori Morimoto
@ 2020-11-04 20:51 ` Rob Herring
0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-11-04 20:51 UTC (permalink / raw)
To: Kuninori Morimoto; +Cc: devicetree, alsa-devel, Mark Brown, Sameer Pujar
On Thu, Oct 29, 2020 at 03:06:23PM +0900, Kuninori Morimoto wrote:
> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> This patch switches from .txt base to .yaml base Document.
> It is still keeping detail explanations at .txt
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> .../bindings/sound/renesas,rsnd.txt | 520 ------------------
> .../bindings/sound/renesas,rsnd.yaml | 456 +++++++++++++++
> 2 files changed, 456 insertions(+), 520 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
> index b39743d3f7c4..b731f16aea84 100644
> --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
> +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
> @@ -253,523 +253,3 @@ This is example of TDM 6ch.
> Driver can automatically switches TDM <-> stereo mode in this case.
>
> see "Example: simple sound card for TDM"
> -
> -=============================================
> -Required properties:
> -=============================================
> -
> -- compatible : "renesas,rcar_sound-<soctype>", fallbacks
> - "renesas,rcar_sound-gen1" if generation1, and
> - "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
> - "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
> - Examples with soctypes are:
> - - "renesas,rcar_sound-r8a7742" (RZ/G1H)
> - - "renesas,rcar_sound-r8a7743" (RZ/G1M)
> - - "renesas,rcar_sound-r8a7744" (RZ/G1N)
> - - "renesas,rcar_sound-r8a7745" (RZ/G1E)
> - - "renesas,rcar_sound-r8a77470" (RZ/G1C)
> - - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
> - - "renesas,rcar_sound-r8a774b1" (RZ/G2N)
> - - "renesas,rcar_sound-r8a774c0" (RZ/G2E)
> - - "renesas,rcar_sound-r8a774e1" (RZ/G2H)
> - - "renesas,rcar_sound-r8a7778" (R-Car M1A)
> - - "renesas,rcar_sound-r8a7779" (R-Car H1)
> - - "renesas,rcar_sound-r8a7790" (R-Car H2)
> - - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
> - - "renesas,rcar_sound-r8a7793" (R-Car M2-N)
> - - "renesas,rcar_sound-r8a7794" (R-Car E2)
> - - "renesas,rcar_sound-r8a7795" (R-Car H3)
> - - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
> - - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
> - - "renesas,rcar_sound-r8a77990" (R-Car E3)
> - - "renesas,rcar_sound-r8a77995" (R-Car D3)
> -- reg : Should contain the register physical address.
> - required register is
> - SRU/ADG/SSI if generation1
> - SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3
> - Select extended AUDIO-DMAC-periperi address if SoC has it,
> - otherwise select normal AUDIO-DMAC-periperi address.
> -- reg-names : Should contain the register names.
> - scu/adg/ssi if generation1
> - scu/adg/ssiu/ssi/audmapp if generation2/generation3
> -- rcar_sound,ssi : Should contain SSI feature.
> - The number of SSI subnode should be same as HW.
> - see below for detail.
> -- rcar_sound,ssiu : Should contain SSIU feature.
> - The number of SSIU subnode should be same as HW.
> - see below for detail.
> -- rcar_sound,src : Should contain SRC feature.
> - The number of SRC subnode should be same as HW.
> - see below for detail.
> -- rcar_sound,ctu : Should contain CTU feature.
> - The number of CTU subnode should be same as HW.
> - see below for detail.
> -- rcar_sound,mix : Should contain MIX feature.
> - The number of MIX subnode should be same as HW.
> - see below for detail.
> -- rcar_sound,dvc : Should contain DVC feature.
> - The number of DVC subnode should be same as HW.
> - see below for detail.
> -- rcar_sound,dai : DAI contents.
> - The number of DAI subnode should be same as HW.
> - see below for detail.
> -- #sound-dai-cells : it must be 0 if your system is using single DAI
> - it must be 1 if your system is using multi DAI
> -- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
> -- clock-names : List of necessary clock names.
> - "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
> - "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
> -
> -Optional properties:
> -- #clock-cells : it must be 0 if your system has audio_clkout
> - it must be 1 if your system has audio_clkout0/1/2/3
> -- clock-frequency : for all audio_clkout0/1/2/3
> -- clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn
> - is asynchronizes with lr-clock.
> -- resets : References to SSI resets.
> -- reset-names : List of valid reset names.
> - "ssi-all", "ssi.X"
> -
> -SSI subnode properties:
> -- interrupts : Should contain SSI interrupt for PIO transfer
> -- shared-pin : if shared clock pin
> -- pio-transfer : use PIO transfer mode
> -- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case
> -- dma : Should contain Audio DMAC entry
> -- dma-names : SSI case "rx" (=playback), "tx" (=capture)
> - Deprecated: see SSIU subnode properties
> - SSIU case "rxu" (=playback), "txu" (=capture)
> -
> -SSIU subnode properties:
> -- dma : Should contain Audio DMAC entry
> -- dma-names : "rx" (=playback), "tx" (=capture)
> -
> -SRC subnode properties:
> -- dma : Should contain Audio DMAC entry
> -- dma-names : "rx" (=playback), "tx" (=capture)
> -
> -DVC subnode properties:
> -- dma : Should contain Audio DMAC entry
> -- dma-names : "tx" (=playback/capture)
> -
> -DAI subnode properties:
> -- playback : list of playback modules
> -- capture : list of capture modules
> -
> -
> -=============================================
> -Example:
> -=============================================
> -
> -rcar_sound: sound@ec500000 {
> - #sound-dai-cells = <1>;
> - compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
> - reg = <0 0xec500000 0 0x1000>, /* SCU */
> - <0 0xec5a0000 0 0x100>, /* ADG */
> - <0 0xec540000 0 0x1000>, /* SSIU */
> - <0 0xec541000 0 0x1280>, /* SSI */
> - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
> - reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
> -
> - clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
> - <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
> - <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
> - <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
> - <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
> - <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
> - <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
> - <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
> - <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
> - <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
> - <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
> - <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
> - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
> - clock-names = "ssi-all",
> - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
> - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
> - "src.9", "src.8", "src.7", "src.6", "src.5",
> - "src.4", "src.3", "src.2", "src.1", "src.0",
> - "dvc.0", "dvc.1",
> - "clk_a", "clk_b", "clk_c", "clk_i";
> -
> - rcar_sound,dvc {
> - dvc0: dvc-0 {
> - dmas = <&audma0 0xbc>;
> - dma-names = "tx";
> - };
> - dvc1: dvc-1 {
> - dmas = <&audma0 0xbe>;
> - dma-names = "tx";
> - };
> - };
> -
> - rcar_sound,mix {
> - mix0: mix-0 { };
> - mix1: mix-1 { };
> - };
> -
> - rcar_sound,ctu {
> - ctu00: ctu-0 { };
> - ctu01: ctu-1 { };
> - ctu02: ctu-2 { };
> - ctu03: ctu-3 { };
> - ctu10: ctu-4 { };
> - ctu11: ctu-5 { };
> - ctu12: ctu-6 { };
> - ctu13: ctu-7 { };
> - };
> -
> - rcar_sound,src {
> - src0: src-0 {
> - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x85>, <&audma1 0x9a>;
> - dma-names = "rx", "tx";
> - };
> - src1: src-1 {
> - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x87>, <&audma1 0x9c>;
> - dma-names = "rx", "tx";
> - };
> - src2: src-2 {
> - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x89>, <&audma1 0x9e>;
> - dma-names = "rx", "tx";
> - };
> - src3: src-3 {
> - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x8b>, <&audma1 0xa0>;
> - dma-names = "rx", "tx";
> - };
> - src4: src-4 {
> - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x8d>, <&audma1 0xb0>;
> - dma-names = "rx", "tx";
> - };
> - src5: src-5 {
> - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x8f>, <&audma1 0xb2>;
> - dma-names = "rx", "tx";
> - };
> - src6: src-6 {
> - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x91>, <&audma1 0xb4>;
> - dma-names = "rx", "tx";
> - };
> - src7: src-7 {
> - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x93>, <&audma1 0xb6>;
> - dma-names = "rx", "tx";
> - };
> - src8: src-8 {
> - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x95>, <&audma1 0xb8>;
> - dma-names = "rx", "tx";
> - };
> - src9: src-9 {
> - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x97>, <&audma1 0xba>;
> - dma-names = "rx", "tx";
> - };
> - };
> -
> - rcar_sound,ssiu {
> - ssiu00: ssiu-0 {
> - dmas = <&audma0 0x15>, <&audma1 0x16>;
> - dma-names = "rx", "tx";
> - };
> - ssiu01: ssiu-1 {
> - dmas = <&audma0 0x35>, <&audma1 0x36>;
> - dma-names = "rx", "tx";
> - };
> -
> - ...
> -
> - ssiu95: ssiu-49 {
> - dmas = <&audma0 0xA5>, <&audma1 0xA6>;
> - dma-names = "rx", "tx";
> - };
> - ssiu96: ssiu-50 {
> - dmas = <&audma0 0xA7>, <&audma1 0xA8>;
> - dma-names = "rx", "tx";
> - };
> - ssiu97: ssiu-51 {
> - dmas = <&audma0 0xA9>, <&audma1 0xAA>;
> - dma-names = "rx", "tx";
> - };
> - };
> -
> - rcar_sound,ssi {
> - ssi0: ssi-0 {
> - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x01>, <&audma1 0x02>;
> - dma-names = "rx", "tx";
> - };
> - ssi1: ssi-1 {
> - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x03>, <&audma1 0x04>;
> - dma-names = "rx", "tx";
> - };
> -
> - ...
> -
> - ssi8: ssi-8 {
> - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x11>, <&audma1 0x12>;
> - dma-names = "rx", "tx";
> - };
> - ssi9: ssi-9 {
> - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&audma0 0x13>, <&audma1 0x14>;
> - dma-names = "rx", "tx";
> - };
> - };
> -
> - rcar_sound,dai {
> - dai0 {
> - playback = <&ssi5 &src5>;
> - capture = <&ssi6>;
> - };
> - dai1 {
> - playback = <&ssi3>;
> - };
> - dai2 {
> - capture = <&ssi4>;
> - };
> - dai3 {
> - playback = <&ssi7>;
> - };
> - dai4 {
> - capture = <&ssi8>;
> - };
> - };
> -};
> -
> -=============================================
> -Example: simple sound card
> -=============================================
> -
> - rsnd_ak4643: sound {
> - compatible = "simple-audio-card";
> -
> - simple-audio-card,format = "left_j";
> - simple-audio-card,bitclock-master = <&sndcodec>;
> - simple-audio-card,frame-master = <&sndcodec>;
> -
> - sndcpu: simple-audio-card,cpu {
> - sound-dai = <&rcar_sound>;
> - };
> -
> - sndcodec: simple-audio-card,codec {
> - sound-dai = <&ak4643>;
> - clocks = <&audio_clock>;
> - };
> - };
> -
> -&rcar_sound {
> - pinctrl-0 = <&sound_pins &sound_clk_pins>;
> - pinctrl-names = "default";
> -
> - /* Single DAI */
> - #sound-dai-cells = <0>;
> -
> -
> - rcar_sound,dai {
> - dai0 {
> - playback = <&ssi0 &src2 &dvc0>;
> - capture = <&ssi1 &src3 &dvc1>;
> - };
> - };
> -};
> -
> -&ssi1 {
> - shared-pin;
> -};
> -
> -=============================================
> -Example: simple sound card for Asynchronous mode
> -=============================================
> -
> -sound {
> - compatible = "simple-scu-audio-card";
> - ...
> - /*
> - * SRC Asynchronous mode setting
> - * Playback:
> - * All input data will be converted to 48kHz
> - * Capture:
> - * Inputed 48kHz data will be converted to
> - * system specified Hz
> - */
> - simple-audio-card,convert-rate = <48000>;
> - ...
> - simple-audio-card,cpu {
> - sound-dai = <&rcar_sound>;
> - };
> - simple-audio-card,codec {
> - ...
> - };
> -};
> -
> -=============================================
> -Example: simple sound card for channel convert
> -=============================================
> -
> -sound {
> - compatible = "simple-scu-audio-card";
> - ...
> - /*
> - * CTU setting
> - * All input data will be converted to 2ch
> - * as output data
> - */
> - simple-audio-card,convert-channels = <2>;
> - ...
> - simple-audio-card,cpu {
> - sound-dai = <&rcar_sound>;
> - };
> - simple-audio-card,codec {
> - ...
> - };
> -};
> -
> -=============================================
> -Example: simple sound card for MIXer
> -=============================================
> -
> -sound {
> - compatible = "simple-scu-audio-card";
> - ...
> - simple-audio-card,cpu@0 {
> - sound-dai = <&rcar_sound 0>;
> - };
> - simple-audio-card,cpu@1 {
> - sound-dai = <&rcar_sound 1>;
> - };
> - simple-audio-card,codec {
> - ...
> - };
> -};
> -
> -&rcar_sound {
> - ...
> - rcar_sound,dai {
> - dai0 {
> - playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
> - };
> - dai1 {
> - playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
> - };
> - };
> -};
> -
> -=============================================
> -Example: simple sound card for TDM
> -=============================================
> -
> -rsnd_tdm: sound {
> - compatible = "simple-audio-card";
> -
> - simple-audio-card,format = "left_j";
> - simple-audio-card,bitclock-master = <&sndcodec>;
> - simple-audio-card,frame-master = <&sndcodec>;
> -
> - sndcpu: simple-audio-card,cpu {
> - sound-dai = <&rcar_sound>;
> - dai-tdm-slot-num = <6>;
> - };
> -
> - sndcodec: simple-audio-card,codec {
> - sound-dai = <&xxx>;
> - };
> -};
> -
> -=============================================
> -Example: simple sound card for TDM Split
> -=============================================
> -
> -sound_card: sound {
> - compatible = "audio-graph-scu-card";
> - prefix = "xxxx";
> - routing = "xxxx Playback", "DAI0 Playback",
> - "xxxx Playback", "DAI1 Playback",
> - "xxxx Playback", "DAI2 Playback",
> - "xxxx Playback", "DAI3 Playback";
> - convert-channels = <8>; /* TDM Split */
> -
> - dais = <&rsnd_port0 /* playback ch1/ch2 */
> - &rsnd_port1 /* playback ch3/ch4 */
> - &rsnd_port2 /* playback ch5/ch6 */
> - &rsnd_port3 /* playback ch7/ch8 */
> - >;
> -};
> -
> -audio-codec {
> - ...
> - port {
> - codec_0: endpoint@1 {
> - remote-endpoint = <&rsnd_ep0>;
> - };
> - codec_1: endpoint@2 {
> - remote-endpoint = <&rsnd_ep1>;
> - };
> - codec_2: endpoint@3 {
> - remote-endpoint = <&rsnd_ep2>;
> - };
> - codec_3: endpoint@4 {
> - remote-endpoint = <&rsnd_ep3>;
> - };
> - };
> -};
> -
> -&rcar_sound {
> - ...
> - ports {
> - rsnd_port0: port@0 {
> - rsnd_ep0: endpoint {
> - remote-endpoint = <&codec_0>;
> - ...
> - playback = <&ssiu30 &ssi3>;
> - };
> - };
> - rsnd_port1: port@1 {
> - rsnd_ep1: endpoint {
> - remote-endpoint = <&codec_1>;
> - ...
> - playback = <&ssiu31 &ssi3>;
> - };
> - };
> - rsnd_port2: port@2 {
> - rsnd_ep2: endpoint {
> - remote-endpoint = <&codec_2>;
> - ...
> - playback = <&ssiu32 &ssi3>;
> - };
> - };
> - rsnd_port3: port@3 {
> - rsnd_ep3: endpoint {
> - remote-endpoint = <&codec_3>;
> - ...
> - playback = <&ssiu33 &ssi3>;
> - };
> - };
> - };
> -};
> -
> -=============================================
> -Example: simple sound card for Multi channel
> -=============================================
> -
> -&rcar_sound {
> - pinctrl-0 = <&sound_pins &sound_clk_pins>;
> - pinctrl-names = "default";
> -
> - /* Single DAI */
> - #sound-dai-cells = <0>;
> -
> -
> - rcar_sound,dai {
> - dai0 {
> - playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
> new file mode 100644
> index 000000000000..9be88c2e4f16
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
> @@ -0,0 +1,456 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car Sound Driver Device Tree Bindings
> +
> +maintainers:
> + - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> +
> +properties:
> +
> + compatible:
> + oneOf:
> + # for Gen1 SoC
> + - items:
> + - enum:
> + - renesas,rcar_sound-r8a7778 # R-Car M1A
> + - renesas,rcar_sound-r8a7779 # R-Car H1
> + - enum:
> + - renesas,rcar_sound-gen1
> + # for Gen2 SoC
> + - items:
> + - enum:
> + - renesas,rcar_sound-r8a7742 # RZ/G1H
> + - renesas,rcar_sound-r8a7743 # RZ/G1M
> + - renesas,rcar_sound-r8a7744 # RZ/G1N
> + - renesas,rcar_sound-r8a7745 # RZ/G1E
> + - renesas,rcar_sound-r8a77470 # RZ/G1C
> + - renesas,rcar_sound-r8a7790 # R-Car H2
> + - renesas,rcar_sound-r8a7791 # R-Car M2-W
> + - renesas,rcar_sound-r8a7793 # R-Car M2-N
> + - renesas,rcar_sound-r8a7794 # R-Car E2
> + - enum:
> + - renesas,rcar_sound-gen2
> + # for Gen3 SoC
> + - items:
> + - enum:
> + - renesas,rcar_sound-r8a774a1 # RZ/G2M
> + - renesas,rcar_sound-r8a774b1 # RZ/G2N
> + - renesas,rcar_sound-r8a774c0 # RZ/G2E
> + - renesas,rcar_sound-r8a774e1 # RZ/G2H
> + - renesas,rcar_sound-r8a7795 # R-Car H3
> + - renesas,rcar_sound-r8a7796 # R-Car M3-W
> + - renesas,rcar_sound-r8a77965 # R-Car M3-N
> + - renesas,rcar_sound-r8a77990 # R-Car E3
> + - renesas,rcar_sound-r8a77995 # R-Car D3
> + - enum:
> + - renesas,rcar_sound-gen3
> + # for Generic
> + - items:
> + - enum:
> + - renesas,rcar_sound-gen1
> + - renesas,rcar_sound-gen2
> + - renesas,rcar_sound-gen3
> +
> + reg:
> + minItems: 1
> + maxItems: 5
> +
> + reg-names:
> + minItems: 1
> + maxItems: 5
> +
> + "#sound-dai-cells":
> + description: |
> + it must be 0 if your system is using single DAI
> + it must be 1 if your system is using multi DAIs
> + enum: [0, 1]
> +
> + "#clock-cells":
> + description: |
> + it must be 0 if your system has audio_clkout
> + it must be 1 if your system has audio_clkout0/1/2/3
> + enum: [0, 1]
> +
> + clock-frequency:
> + description: for audio_clkout0/1/2/3
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> + clkout-lr-asynchronous:
> + description: audio_clkoutn is asynchronizes with lr-clock.
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + power-domains: true
> +
> + resets:
> + maxItems: 11
> +
> + reset-names:
> + maxItems: 11
> +
> + clocks:
> + description: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
> + minItems: 1
> + maxItems: 31
> +
> + clock-names:
> + description: List of necessary clock names.
> + minItems: 1
> + maxItems: 31
> + items:
> + oneOf:
> + - const: ssi-all
> + - pattern: '^ssi\.[0-9]$'
> + - pattern: '^src\.[0-9]$'
> + - pattern: '^mix\.[0-1]$'
> + - pattern: '^ctu\.[0-1]$'
> + - pattern: '^dvc\.[0-1]$'
> + - pattern: '^clk_(a|b|c|i)$'
> +
> + port:
> + description: OF-Graph subnode
> + $ref: "audio-graph-card.yaml#/properties/port"
> +
> + ports:
> + description: multi OF-Graph subnode
> + $ref: "audio-graph-card.yaml#/properties/ports"
> +
> +# use patternProperties to avoid naming "xxx,yyy" issue
> +patternProperties:
> + "^rcar_sound,dvc$":
> + description: DVC subnode.
> + type: object
> + patternProperties:
> + "^dvc-[0-1]$":
> + type: object
> + properties:
> + dmas:
> + maxItems: 1
> + dma-names:
> + const: "tx"
> + required:
> + - dmas
> + - dma-names
> + additionalProperties: false
> +
> + "^rcar_sound,mix$":
> + description: MIX subnode.
> + type: object
> + patternProperties:
> + "^mix-[0-1]$":
> + type: object
> + # no propaties
typo
If no properties, then should have 'additionalProperties: false'/
> + additionalProperties: false
> +
> + "^rcar_sound,ctu$":
> + description: CTU subnode.
> + type: object
> + patternProperties:
> + "^ctu-[0-7]$":
> + type: object
> + # no propaties
Same here.
> + additionalProperties: false
> +
> + "^rcar_sound,src$":
> + description: SRC subnode.
> + type: object
> + patternProperties:
> + "^src-[0-9]$":
> + type: object
> + properties:
> + interrupts:
> + maxItems: 1
> + dmas:
> + maxItems: 2
> + dma-names:
> + allOf:
> + - items:
> + enum:
> + - tx
> + - rx
> + allOf:
> + - if:
> + properties:
> + status:
> + const: "ok"
I think we have a GH issue for this problem. Please don't work around it
and we'll need to fix it.
> + then:
> + required:
> + - interrupts
> + - dmas
> + - dma-names
> + additionalProperties: false
> +
> + "^rcar_sound,ssiu$":
> + description: SSIU subnode.
> + type: object
> + patternProperties:
> + "^ssiu-[0-9]+$":
> + type: object
> + properties:
> + dmas:
> + maxItems: 2
> + dma-names:
> + allOf:
> + - items:
> + enum:
> + - tx
> + - rx
> + required:
> + - dmas
> + - dma-names
> + additionalProperties: false
> +
> + "^rcar_sound,ssi$":
> + description: SSI subnode.
> + type: object
> + patternProperties:
> + "^ssi-[0-9]$":
> + type: object
> + properties:
> + interrupts:
> + maxItems: 1
> + dmas:
> + minItems: 2
> + maxItems: 4
> + dma-names:
> + allOf:
> + - items:
> + enum:
> + - tx
> + - rx
> + - txu # if no ssiu node
> + - rxu # if no ssiu node
> +
> + shared-pin:
> + description: shared clock pin
> + $ref: /schemas/types.yaml#/definitions/flag
> + pio-transfer:
> + description: PIO transfer mode
> + $ref: /schemas/types.yaml#/definitions/flag
> + no-busif:
> + description: BUSIF is not used when [mem -> SSI] via DMA case
> + $ref: /schemas/types.yaml#/definitions/flag
> + required:
> + - interrupts
> + - dmas
> + - dma-names
> + additionalProperties: false
> +
> + # For DAI base
> + "^rcar_sound,dai$":
> + description: DAI subnode.
> + type: object
> + patternProperties:
> + "^dai([0-9]+)?$":
> + type: object
> + properties:
> + playback:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + capture:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + anyOf:
> + - required:
> + - playback
> + - required:
> + - capture
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - "#sound-dai-cells"
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: renesas,rcar_sound-gen1
> + then:
> + properties:
> + reg:
> + maxItems: 3
> + reg-names:
> + maxItems: 3
> + items:
> + enum:
> + - scu
> + - ssi
> + - adg
> + else:
> + properties:
> + reg:
> + maxItems: 5
> + reg-names:
> + maxItems: 5
> + items:
> + enum:
> + - scu
> + - adg
> + - ssiu
> + - ssi
> + - audmapp
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + rcar_sound: sound@ec500000 {
> + #sound-dai-cells = <1>;
> + compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
> + reg = <0xec500000 0x1000>, /* SCU */
> + <0xec5a0000 0x100>, /* ADG */
> + <0xec540000 0x1000>, /* SSIU */
> + <0xec541000 0x1280>, /* SSI */
> + <0xec740000 0x200>; /* Audio DMAC peri peri*/
> + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
> +
> + clocks = <&mstp10_clks 1005>, /* SSI-ALL */
> + <&mstp10_clks 1006>, <&mstp10_clks 1007>, /* SSI9, SSI8 */
> + <&mstp10_clks 1008>, <&mstp10_clks 1009>, /* SSI7, SSI6 */
> + <&mstp10_clks 1010>, <&mstp10_clks 1011>, /* SSI5, SSI4 */
> + <&mstp10_clks 1012>, <&mstp10_clks 1013>, /* SSI3, SSI2 */
> + <&mstp10_clks 1014>, <&mstp10_clks 1015>, /* SSI1, SSI0 */
> + <&mstp10_clks 1022>, <&mstp10_clks 1023>, /* SRC9, SRC8 */
> + <&mstp10_clks 1024>, <&mstp10_clks 1025>, /* SRC7, SRC6 */
> + <&mstp10_clks 1026>, <&mstp10_clks 1027>, /* SRC5, SRC4 */
> + <&mstp10_clks 1028>, <&mstp10_clks 1029>, /* SRC3, SRC2 */
> + <&mstp10_clks 1030>, <&mstp10_clks 1031>, /* SRC1, SRC0 */
> + <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* MIX1, MIX0 */
> + <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* CTU1, CTU0 */
> + <&mstp10_clks 1019>, <&mstp10_clks 1018>, /* DVC0, DVC1 */
> + <&audio_clk_a>, <&audio_clk_b>, /* CLKA, CLKB */
> + <&audio_clk_c>, <&audio_clk_i>; /* CLKC, CLKI */
> +
> + clock-names = "ssi-all",
> + "ssi.9", "ssi.8",
> + "ssi.7", "ssi.6",
> + "ssi.5", "ssi.4",
> + "ssi.3", "ssi.2",
> + "ssi.1", "ssi.0",
> + "src.9", "src.8",
> + "src.7", "src.6",
> + "src.5", "src.4",
> + "src.3", "src.2",
> + "src.1", "src.0",
> + "mix.1", "mix.0",
> + "ctu.1", "ctu.0",
> + "dvc.0", "dvc.1",
> + "clk_a", "clk_b",
> + "clk_c", "clk_i";
> +
> + rcar_sound,dvc {
> + dvc0: dvc-0 {
> + dmas = <&audma0 0xbc>;
> + dma-names = "tx";
> + };
> + dvc1: dvc-1 {
> + dmas = <&audma0 0xbe>;
> + dma-names = "tx";
> + };
> + };
> +
> + rcar_sound,mix {
> + mix0: mix-0 { };
> + mix1: mix-1 { };
> + };
> +
> + rcar_sound,ctu {
> + ctu00: ctu-0 { };
> + ctu01: ctu-1 { };
> + ctu02: ctu-2 { };
> + ctu03: ctu-3 { };
> + ctu10: ctu-4 { };
> + ctu11: ctu-5 { };
> + ctu12: ctu-6 { };
> + ctu13: ctu-7 { };
> + };
> +
> + rcar_sound,src {
> + src0: src-0 {
> + status = "disabled";
> + };
> + src1: src-1 {
> + interrupts = <0 353 0>;
> + dmas = <&audma0 0x87>, <&audma1 0x9c>;
> + dma-names = "rx", "tx";
> + };
> + /* skip after src-2 */
> + };
> +
> + rcar_sound,ssiu {
> + ssiu00: ssiu-0 {
> + dmas = <&audma0 0x15>, <&audma1 0x16>;
> + dma-names = "rx", "tx";
> + };
> + ssiu01: ssiu-1 {
> + dmas = <&audma0 0x35>, <&audma1 0x36>;
> + dma-names = "rx", "tx";
> + };
> + /* skip after ssiu-2 */
> + };
> +
> + rcar_sound,ssi {
> + ssi0: ssi-0 {
> + interrupts = <0 370 1>;
> + dmas = <&audma0 0x01>, <&audma1 0x02>;
> + dma-names = "rx", "tx";
> + };
> + ssi1: ssi-1 {
> + interrupts = <0 371 1>;
> + dmas = <&audma0 0x03>, <&audma1 0x04>;
> + dma-names = "rx", "tx";
> + };
> + /* skip other ssi-2 */
> + };
> +
> + /* DAI base */
> + rcar_sound,dai {
> + dai0 {
> + playback = <&ssi5 &src5>;
> + capture = <&ssi6>;
> + };
> + dai1 {
> + playback = <&ssi3>;
> + };
> + dai2 {
> + capture = <&ssi4>;
> + };
> + dai3 {
> + playback = <&ssi7>;
> + };
> + dai4 {
> + capture = <&ssi8>;
> + };
> + };
> +
> + /* assume audio-graph */
> + port {
> + rsnd_endpoint: endpoint {
> + remote-endpoint = <&codec_endpoint>;
> +
> + dai-format = "left_j";
> + bitclock-master = <&rsnd_endpoint0>;
> + frame-master = <&rsnd_endpoint0>;
> +
> + playback = <&ssi0 &src0 &dvc0>;
> + capture = <&ssi1 &src1 &dvc1>;
> + };
> + };
> + };
> +
> +
> + /* assume audio-graph */
> + codec {
> + port {
> + codec_endpoint: endpoint {
> + remote-endpoint = <&rsnd_endpoint>;
> + };
> + };
> + };
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v5 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support
2020-10-29 6:06 ` [PATCH v5 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support Kuninori Morimoto
@ 2020-11-04 20:52 ` Rob Herring
0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2020-11-04 20:52 UTC (permalink / raw)
To: Kuninori Morimoto
Cc: Sameer Pujar, devicetree, alsa-devel, Rob Herring, Mark Brown
On Thu, 29 Oct 2020 15:06:34 +0900, Kuninori Morimoto wrote:
>
> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> Document R-Car M3-W+ (R8A77961) SoC bindings.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-11-04 20:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-29 6:05 [PATCH v5 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation Kuninori Morimoto
2020-10-29 6:06 ` [PATCH v5 1/3] dt-bindings: ASoC: " Kuninori Morimoto
2020-10-29 6:22 ` Sameer Pujar
2020-11-04 20:33 ` Rob Herring
2020-10-29 6:06 ` [PATCH v5 2/3] dt-bindings: ASoC: renesas, rsnd: " Kuninori Morimoto
2020-11-04 20:51 ` [PATCH v5 2/3] dt-bindings: ASoC: renesas,rsnd: " Rob Herring
2020-10-29 6:06 ` [PATCH v5 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support Kuninori Morimoto
2020-11-04 20:52 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).